DVDVideo player
DVD756
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English -------------------------------------------------------- 9
Français------------------------------------------------------31
Español ------------------------------------------------------54
Deutsch -----------------------------------------------------77
Nederlands ----------------------------------------------- 100
Italiano----------------------------------------------------- 122
Svenska ---------------------------------------------------- 144
Dansk ------------------------------------------------------ 166
Suomi ------------------------------------------------------ 188
Português ------------------------------------------------- 210
∂ÏÏËÓÈο-------------------------------------------------- 232
3
INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
The region code for this set is 2.
Laser safety
2
Since it is usual for DVD movies to be released at
different times in different regions of the world,
all players have region codes and discs can have an optional
region code. If you load a disc of a different region code to
your player, you will see the region code notice on the
screen.The disc will not play, and should be unloaded.
This unit employs a laser. Due to possible eye injury, only a
qualified service person should remove the cover or
attempt to service this device.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THANTHOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
NOTE:
PICTURES SHOWN MAYBE DIFFERENT
BETWEEN COUNTRIES.
LASER
Type
Wave length
Semiconductor laser GaAlAs
650 nm (DVD)
CAUTION
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degree
WARNING LOCATION: INSIDE ON LASER
COVERSHIELD ORTHE BACKPLATE OF SET
Output Power
Beam divergence
NEVER MAKE OR CHANGE CONNECTIONS
WITHTHE POWER SWITCHED ON.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID EXPOSURETO BEAM
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLINGVED ÅBNING
UNDGÅ UDSÆTTELSE FOR STRÅLING
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL
ÅPNES UNNGÅ EKSPONERING FOR STRÅLEN
VARNING
The DVD-VIDEO player is in conformity
with the EMC directive and low-voltage
directive.
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO!
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN
TruSurround and the SRS symbol are trademarks of SRS
Labs., Inc.TruSurround technology is manufactured under
license from SRS Labs., Inc.
VORSICHT
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET NICHT DEM
STRAHL AUSSETSEN
DANGER
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID DIRECT EXPOSURETO BEAM
ATTENTION
RAYONNEMENT LASERVISIBLE ET INVISIBLE EN CAS
D’OUVERTURE EXPOSITION DANGEREUSE AU
FAISCEAU
For Customer Use:
Read carefully the information located at the bottom of
your DVD-VIDEO player and enter below the Serial
No.Retain this information for future reference.
Model No. DVD-VIDEO
Serial No. __________________________
4
GENERAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Philips DVD-Video Introduction ------------------------- 6
Unpacking ---------------------------------------------------- 6
Safety Information ------------------------------------------ 6
Cleaning Discs ---------------------------------------------- 6
Functional overview
Front panel -------------------------------------------------- 7
Rear panel --------------------------------------------------- 8
Display -------------------------------------------------------- 9
Remote control --------------------------------------------10
On-screen display information
Menu bar/Status window---------------------------------11
Status window icons --------------------------------------11
Default screen----------------------------------------------11
Temporary feedback field icons -------------------------11
Preparation
General notes ----------------------------------------------12
Connecting to aTV ---------------------------------------12
Connecting to optional equipment-----------------12-13
Remote Control battery installation-------------------13
NTSC/PAL Settings----------------------------------------13
General explanation ----------------------------------13-14
Turning on the power ------------------------------------14
Initial Setup -------------------------------------------------14
Personal Preferences----------------------------------15-16
Access Control: child lock -------------------------------16
Access Control: parental control -----------------------17
Operation
Loading discs -----------------------------------------------18
Playing a DVD-Video disc --------------------------------18
Playing aVideo CD ----------------------------------------18
General Features --------------------------------------18-20
Special DVD features ---------------------------------20-21
SpecialVCD features--------------------------------------21
Playing an Audio CD ----------------------------------21-22
FTS Program -----------------------------------------------22
Before requesting service
Before requesting service --------------------------------23
Specifications
Specifications -----------------------------------------------24
5
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Philips DVD-Video
Introduction
Unpacking
First check and identify the contents of your DVD-Video
player package.
Your Philips DVD-Video player will play digital video discs
conforming to the universal DVD-Video standard.With it,
you will be able to enjoy full-length movies with true
cinema picture quality, as well as stereo or multi-channel
sound (depending on the disc and your playback setup).
The unique features of DVD-Video, such as selection of
sound track, subtitle languages and different camera angles
(again depending on the disc), are all included.What’s more,
Philips Child Lock lets you decide which discs your children
will be able to see.
You should have the following items.
– DVD-Video player
– Remote Control with batteries
– AC power cord
– Audio cable
– Video cable
– SCART cable
– Instructions for use
If any item is damaged or missing, contact your retailer or
Philips.
Keep the packaging materials; you may need them to
transport your player in the future.
In addition to DVD-Video discs, you will be able to play all
Video CDs and Audio CDs (including finalized CD
Recordable and CD Rewritable).
You will find the On-Screen Display, player display, and
remote control make the player easy to use.This manual
provides all the information you will need, so read on!
Safety Information
¶
Do not expose the system to excessive moisture, rain, sand
or heat sources.
DVD-Video
¶
¶
Place the player on a firm, flat surface.
Keep the player away from domestic heating equipment
and direct sunlight.
In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
If the DVD-Video player cannot read CDs/DVDs correctly,
use a commonly available cleaning CD/DVD to clean the
lens before taking the DVD-Video player to be repaired.
Other cleaning methods may destroy the lens.Always keep
the tray closed to avoid dust on the lens.
You will recognize DVD-Video discs by
the logo shown.
Depending on the material on the disc (a movie, video clips,
a drama series, etc.) the disc may have one or moreTitles.
¶
¶
DVD-VIDEO DISC
TITLE 1
TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
¶
The lens may cloud over when the DVD-Video player is
suddenly moved from cold to warm surroundings. Playing a
CD/DVD is not possible then. Leave the DVD-Video player
in a warm environment until the moisture evaporates.
Video CD
You will recognizeVideo CDs by the logo
shown.
Cleaning discs
Audio CD
Some problems occur because the disc inside the player is
dirty.To avoid these problems clean your discs regularly, in
the following way:
Audio CDs contain music tracks only.
You will recognize Audio CDs by their logo
which is shown.
¶
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out.
Caution: Do not use solvents such as benzine,
thinner, commercially available cleaners, or anti-
static spray intended for analog discs.
6
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front panel
STANDBY-ON – switches the player to Standby mode or ON
Standby indicator– lights red when the player is in Standby
mode
Display – shows the current status of the player
T – NEXT title/chapter/track
2 PLAY – starts video/audio play
S – PREVious title/chapter/track
SOUND
– selects Stereo, Dolby Surround or 3D-Sound
DVD 756 DVD/VIDEO CD/CD PLAYER
STANDBY-ON
SOUND
PLAY
TITLE CHAPTER TRACK
TOTAL TRACK TIME
CA
A
-B REPEAT SHUFFLE CHAPTER TITLE TRACK
VCD
PREV
NEXT
OPEN/CLOSE
PAUSE
STOP
PHONES
-
LEVEL
min.
Disc Tray
/ OPEN/CLOSE – opens/closes the disc tray
; PAUSE – interrupts video/audio play or advances
to the next picture frame
9 STOP – stops video/audio play
LEVEL – headphone volume control
PHONES – for connecting headphones
7
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
MAINS (AC) power jack – connect to the power
source
Digital audio out jack (optical)
– connect to digital (optical) equipment
Digital audio out jack (coaxial)
– connect to digital (coaxial) equipment
Audio / L/R (Left/Right)
– connect to an amplifier, receiver or stereo system
TV OUT (TV)
– connect to a TV with SCART
AUX/VCR (SCART)
– connect to a VCR
S-Video Out (S-Video)
– connect to a TV with S-Video (Y/C) inputs
Video Out (CVBS)
– connect to a TV with CVBS video inputs
I
AUX/VCR
IN
STEREO OUT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
II
TV OUT
MAINS
R
L
(CVBS)
(Y/C)
OPT OUT
DIG OUT
AUDIO OUT
S-VIDEO OUT
VIDEO OUT
Caution: Do not touch the inner pins of the jacks
on the rear panel connectors. Electrostatic
discharge may cause permanent damage to the
unit.
8
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
DVD inserted
Video CD or Audio CD inserted
VCD
Indicates current player function: Play, Pause, Search, etc.
DVDTITLE number
TITLE
DVD CHAPTER number
VCD/CDTRACK number
CHAPTER
TRACK
TRACKTIME in hours, minutes and seconds
TOTALTIME in hours, minutes and seconds
TIME
TRACK TIME
TOTAL
TOTAL TRACK TIME
CHAPTER TRACK
A -B
TITLE
SHUFFLE CHAPTER TITLE TRACK
VCD
REPEAT
REPEAT CHAPTER/TITLE/TRACK active
Remote control active (flashing)
FTS active
A-B REPEAT
SHUFFLE
REPEAT A-B active
SHUFFLE active
9
Download from Www.Somanuals.com. All Manuals Search And DownloFadU. NCTIONAL OVERVIEW
Remote control
STANDBY-ON
(ON/OFF)
0-9
numerical key pad
2
RETURN
– go back to previous
menu
MENU DVD
– access menu of a DVD
1
4
2
5
8
0
3
6
9
MENU OSD
– access or remove On-
screen display
OK
– acknowledge menu
selection
– bit rate indicator*
7
MENU
DVD
MENU
OSD
t u w v
– (left/right/up/down)
cursor movement
RETURN
Z
OK
– subtitle language selector
Q O
– search backward* /
previous chapter or track
Y
– audio language selector
W
i
9
– select title
– stop
T-C
X
2
– select chapter
à
í
á
ë
– play
Ç
É
Å
a
R P
– search forward* / next
chapter or track
SHUFFLE
REPEAT REPEAT
A-B
– enlarge video image
}
– select DVD camera angle
REPEAT
– repeat chapter, track, title,
disc
REPEAT A-B
– repeat sequence
SHUFFLE
– playback tracks in random
order
;
– pause playback
temporarily / frame-by-
frame playback
* Press key for about 2 seconds
10
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display Information
Menu bar/Status window
Default screen
V
W
X
Y
Z
}
Personal Preferences
Title/Track
Chapter/Index
Audio language
Subtitle language
Angle
The default screen is displayed when the player is in STOP
mode.
It may contain a ‘Status Window’ and a ‘Temporary
Feedback Field’.This gives information concerning
prohibited actions, playback modes, available angles, etc.
a
b
c
d
Zoom
Color Settings (Smart Picture)
Video Program
Sound
e Picture by Picture
Slow motion
g Fast motion
Time search
f
h
Temporary Feedback Field
icons
Repeat All
Status window icons
RepeatTitle
RepeatTrack
Repeat Chapter
Shuffle
The status window displays the current status of the player
and appears with the first part of the menu bar. (You must
activate this in the Features Menu - see Personal
Preferences for details).
Shuffle Repeat
Repeat A to end
Repeat A-B
Angle
General
Disc type
Child Lock On
Child Safe
Tray status
Resume
Action prohibited
11
Download from Www.Somanuals.com. All Manuals SeOarchNAnSdCDRowEnEloNad.DISPLAY INFORMATION
Preparation
General notes
Connecting to optional
equipment
¶
Depending on yourTV and other equipment you wish to
connect, there are various ways you could connect the
player. Possible connections are shown in the following
drawings.
Connecting to an amplifier equipped with
two channel analog stereo
¶
Please refer to the manuals of yourTV,VCR, Stereo System
or other devices as necessary to make the best
connections.
1 Connect the audio Left and Right out jacks of the DVD
player to the audio left and right in jack on your amplifier,
receiver or stereo system, using the optional audio cable
(E).
¶
¶
Do not connect your DVD-player via yourVCR.The video
quality could be distorted by the copy protection system.
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or A/V equipment. See ‘Connecting to optional
equipment’.
Connecting to an amplifier equipped with
two channel digital stereo (PCM)
1 Connect the player’s digital audio out jack (optical G or
coaxial F) to the corresponding in jack on your amplifier.
Use an optional digital (optical G or coaxial F) audio cable.
Caution: Do not connect the player’s audio out
jack to the phono in jack of your audio system.
2 You will need to activate the player’s digital output (see
‘Personal Preferences’).
Connecting to a TV
Connecting to an A/V receiver equipped
with a multi-channel decoder (Dolby
Digital™(AC-3), MPEG 2 and DTS)
1 Connect the SCART to the corresponding connector on
theTV using the SCART cable supplied (A).
If yourTV is not equipped with a SCART you can select
one of the following alterative connections:
Digital Multi-channel sound
Digital multi-channel connection provides the best sound
quality. For this you need a multi-channel A/V receiver that
supports one or more of the audio formats supported by
your DVD player (MPEG 2, Dolby Digital™(AC-3) and
DTS). Check the receiver manual and the logos on the
front of the receiver.
S-Video (Y/C) connection
1 Connect the S-Video jack on the DVD-player to the S-
Video in jack on theTV using an optional S-Video cable (B).
2 Connect the audio Left and Right out jacks to the audio
left/right in jacks on theTV (D).
1 Connect the DVD player’s digital audio output (optical G
or coaxial F) to the corresponding input on the receiver
using an optional digital (optical G or coaxial F) audio cable.
Video CVBS connection
2 You will need to activate the player’s digital output (see
1 Connect theVideo out (CVBS) jack to the video in jack on
theTV using the video cable supplied (C).
‘Personal Preferences’).
2 Connect the audio Left and Right out jacks to the audio
left/right in jacks on theTV (D).
All
TV
Note:
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– The selected audio format of the DVD is displayed in the
Status Window when the Menu OSD is activated or Audio
button is activated.
D
C
B
A
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
I
AUX/VCR
IN
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
STEREO OUT
– To see the selected audio format of the current DVD in the
Status Window, press the MENU OSD or the Audio Language
selector button.
II
TV OUT
MAINS
R
L
(CVBS)
(Y/C)
OPT OUT
DIG OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
12
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Do not mix old and new batteries. Never
mix different types of batteries (standard, alkaline,
etc.)
AMPLIFIER
TV
G
F
E
NTSC/PAL Settings
I
AUX/VCR
IN
You can switch the NTSC/PAL setting of the DVD player to
match the video signal of yourTV.This setting only affects
the television’s on-screen display that shows the stop and
setup modes.You may select either NTSC or PAL.To
change the DVD player setting to PAL or NTSC, follow the
steps below.
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
STEREO OUT
II
TV OUT
MAINS
R
L
(CVBS)
(Y/C)
OPT OUT
DIG OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Cinemalink (on SCART)
This DVD player is equipped with cinemalink feature (from
Philips) which allows a more complete control of your
home audio/video (AV) equipment.
1 Unplug the DVD player from the mains.
2 Press and hold 9and Ton the front of the DVD player.
While holding 9and T, plug in the mains.
Cinemalink interconnection plug & play will enable the AV
system to recognise the users intention and automatically
switch the necessary controls or input source accordingly.
This will reduce the necessity of having multiple control
inputs for all AV equipments (eg.TV and Amplifier).
3 After PAL or NTSC appears on the display panel of the
DVD player, release 9and Tat the same time.The PAL
or NTSC that appears on the display panel indicates the
current setting.
4 To change the setting, press Twithin three seconds.The
new setting (PAL or NTSC) will appear on the display
panel.
Connecting to an amplifier equipped with
Dolby Surround™
Dolby Surround sound
General explanation
1 Connect the player to theTV, then connect the player’s
audio Left and Right out jacks to the corresponding in jacks
on the Dolby Surround™ Audio/Video receiver, using the
audio/video cable supplied (D).
About this manual
This manual gives the basic instructions for operating this
DVD player. Some DVDs require specific operation or
allow only limited operation during playback. In these cases,
the player may not respond to all operating commands.
When this occurs, please refer to the instructions contained
with the DVD. When the symbol Ä appears on theTV
screen, the operation is not permitted by the player or the
disc.
If your amplifier is equipped with a Dolby
Digital™ decoder,
Connect the player as described in ‘Connecting to an A/V
receiver with multi-channel decoder’.
¶
If yourTV is equipped with a Dolby Surround™
decoder,
Connect the player to theTV as described in ‘Connecting
¶
to aTV’.
Remote control operation
¶
Unless otherwise stated, all operations can be carried out
with the remote control.Always point the remote control
directly at the player, making sure there are no obstructions
in the path of the infrared beam.
Remote control battery
installation
When there are corresponding keys on the front panel of
the player, they can also be used.
Loading the batteries
1 Open the battery compartment cover.
2 Insert batteries as indicated inside the battery
compartment.
3 Close the cover.
13
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
The following items may have to be set in Initial
Setup:
Menu bar operation
¶
A number of operations can be carried out via the menu
bar on the screen.The menu bar can be accessed by
pressing any of the following keys on the remote control:
MENU OSD,T-C,Angle,Audio Language, Subtitle Language
and Zoom.
Menu language
You can choose from different languages.The On Screen
Menus will be displayed in the language you choose.
Audio language
¶
¶
Pressing MENU OSD while the menu bar is displayed will
clear the menu bar from the screen.
You can choose from different languages.The sound will be
in the language you choose if it is available on the disc in
play. If the language you select is not available, speech will
revert to the first spoken language on the disc.
When selecting an item in the menu bar, the selected item
will be highlighted and the appropriate cursor keys to
operate this item will be displayed below the icon.
< or > indicates that more items are available at the left/
right of the menu bar. Press tor uto select these items.
¶
Subtitle language
You can choose from different languages.The subtitles will
be in the language you choose if it is available on the disc in
play. If the language you select is not available, subtitles will
revert to the first subtitle language on the disc.
RETURN
OK
i
Initial Setup
Menu language
Initial Setup
Audio language
Initial Setup
Subtitle language
Turning On the power
English
Español
Français
Português
Chinese
Malay
English
Español
Français
Português
Russian
Polish
English
Español
Français
Português
Russian
Polish
1 Switch on theTV and select the video input channel for
your DVD-Video player.
2 Press STANDBY-ON button.
DVD 756 DVD/VIDEO CD/CD PL
STANDBY-ON
TV Shape
If you have a wide screen (16:9)TV, select 16:9.
If you have a regular (4:3)TV, select 4:3.
Initial Setup (Virgin Mode)
If you have a 4:3TV, you can also select between:
Letterbox for a ‘wide-screen’ picture with black bars top
and bottom, or Pan Scan, for a full-height picture with the
sides trimmed. If a disc has Pan Scan, the picture then
moves (scans) horizontally to keep the main action on the
screen.
General
In ‘Initial Setup’ you may have to set your preferences for
some of the player’s features. (not applicable for all models)
Operation
Country
Select your country.This is used as input for the ‘Parental
Control’ feature (see ‘Access Control’).
After switching on the player for the very first time, the
‘Initial Setup Screen’ will appear.
The menu for the first item to be set is displayed and the
first option is highlighted.
Note:
– All these items may have to be set during ‘Initial Setup’.
After that, they can always be changed in the Personal
Preferences Menu.
¶
¶
Use the wvkeys to go through the options in the menu.
The icon of the selected option will be highlighted.
Use OK to confirm your selection and to go to the next
menu.
Note:
– Preferences have to be set in the order in which the item
menus will appear on the screen.
– The ‘Initial Setup’ screen will only disappear after the
settings for the last item have been confirmed.
– If any keys other than wvor OK are pressed, Ä will
appear on the screen.
– If the player is switched off while setting personal
preferences, all preferences have to be set again after switching
the player on again.
14
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
– Personal color
Personal Preferences
Allows you to fine-tune the selected color settings (SCART
connection only) saturation, brightness and contrast.
You can set your personal preferences for some of the
player features.
Sound
– Digital output
General operation:
Factory setting:ALL.This means that both coaxial and
optical outputs are switched on. If you are not connecting
equipment with a digital input, change the setting to OFF.
If your equipment doesn't include a digital multi-channel
decoder, set the digital output to PCM (Pulse Code
Modulation). Both coaxial and optical outputs are switched
on.
¶
¶
Press MENU OSD on the remote control.
Select V in the menu bar.
➜The Personal Preferences menu appears.
Use the tuwvkeys to toggle through the menus,
submenus and submenu options.
➜ When a menu item is selected, the cursor keys (on the
remote control) to operate the item are displayed next to
the item.
¶
– Analog output
¶
Press OK to confirm and return to the main menu.
The following items can be adapted:
Select Stereo, Dolby Surround or 3D sound.
Picture
– Night Mode
– TV Shape
Optimizes the dynamics of the sound with low volume
playback.
See ‘Initial Setup’
– Karaoke vocal
– Black level shift (NTSC only)
Put this setting to ON only when a multi-channel karaoke
DVD is being played.The karaoke channels on the disc will
then be mixed into a normal stereo sound.
Select ON for adapting the color dynamics to obtain richer
contrasts.
Language
Select the required Menu,Audio and Subtitle language. See
‘Initial Setup’.
Audio language and Subtitle language can also be adapted
via the Menu bar on the screen.
Features
– Access Control
– Video shift
The factory centers the video on your screen. Use this
setting to personalize the position of the picture on your
TV by scrolling it to the left or right.
Access Control contains the following features:
Child Lock - When Child Lock is set to ON, a 4-digit code
needs to be entered in order to play discs.
Parental control - Allows the conditional presentation of
DVDs containing Parental Control information (see ‘Access
Control’).
– StatusWindow
Displays the current status of the player and is displayed
with the menu bar. When disc playback is stopped, it is
displayed with the ‘Temporary Feedback Field’ in the default
screen. See ‘On-Screen Display’ information;
Factory setting is ON. Select OFF to suppress display of the
Status Window.
– Color settings (SCART connection)
You can select one of five predefined sets of color settings
(SCART connection only) and one set (Personal) which
you can define yourself.
15
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
– Bit Rate Indicator
Authorizing discs
When activated, the bit rate for video, audio as well as total
bit rate is displayed.This is only applicable during playback
of DVD and SVCD discs
¶
Insert the disc. See ‘Loading disc’.
➜The ‘child protect’ dialog will appear.
You will be asked to enter your secret code for ‘Play Once
‘or ‘Play Always.’ If you select ‘Play Once’, the disc can be
played as long as it is in the player and the player is ON. If
you select ‘Play Always’, the disc will become child safe
(authorized) and can always be played, even if the Child
Lock is set to ON.
– Beeper
Notes:
The beeper can be set to ON or OFF.
– The player memory maintains a list of 50 authorized (‘Child
safe’) disc titles.A disc will be placed in the list when ‘Play
Always’ is selected in the ‘child protect’ dialog.
– Each time a ‘child safe’ disc is played, it will be placed on
top of the list.When the list is full and a new disc is added, the
last disc in the list will be removed from the list.
– Double sided DVDs may have a different ID for each side. In
order to make the disc ‘child safe’, each side has to be
authorized.
Access control; child lock
(DVD and VCD)
Activating/deactivating the child lock
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter a 4-digit code of your own choice.
– Multi-volume VCDs may have a different ID for each
volume. In order to make the complete set ‘child safe’, each
volume has to be authorized.
3 Enter the code a second time.
4 Move to “CHILD LOCK” using the w/vkeys.
5 Move to LOCK/UNLOCK using the ukey.
6 Select LOCK using the w/vkeys.
7 Press OK or tto confirm, then press tagain to exit the
menu.
➜ Now unauthorized discs will not be played unless the
4-digit code is entered.
Choose 'Play always' to remove the disk from the
child-safe list
8 Select UNLOCK to deactivate the CHILD LOCK.
Note: Confirmation of the 4-digit code is necessary when:
– The code is entered for the very first time (see above),
– The code is changed (see ‘Changing the 4-digit code’),
– The code is cancelled (see ‘Changing the 4-digit code’).
Deauthorizing discs
¶
¶
Insert the disc. See ‘Loading disc’.
➜ Playback starts automatically.
Press 9while { is visible.
➜The | will appear and the disc is now deauthorized.
16
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Country
Access control; Parental
control (DVD-Video only)
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY using the wkey.
4 Press the ukey.
Movies on DVDs may contain scenes not suitable for
children.Therefore, disc may contain ‘Parental Control’
information which applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternative, more suitable scenes are available on
the disc. Ratings are country dependent.The ‘Parental
Control’ feature allows you to prevent discs from being
played by your children or to have certain discs played with
alternative scenes.
5 Select a country using w/v.
6 Press OK or tto confirm, then press tagain to exit the
menu.
Changing the 4-digit code
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter the old code.
3 Move to CHANGE CODE using the wkey.
4 Press the ukey.
5 Enter the new 4-digit code.
6 Enter the code a second time and reconfirm by pressing
OK.
7 Press tto exit the menu.
Activating/Deactivating Parental Control
Note:
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter your 4-digit code. If necessary, enter the code a
second time.
– If you forget your 4 digit code, it can be cancelled by
pressing 9four times in the ‘Access Control’ dialog.You can
then enter a new code (twice!) as described above.
3 Move to Parental Control using the w/vkeys.
4 Move to VALUE ADJUSTMENT (1-8) using the ukey.
Parental Control Disclaimer
5 Then use the w/vkeys or the numerical keys on the
remote control to select a rating from 1 to 8 for the disc
inserted.
This DVD player features the PARENTAL CONTROL
system which is intended to activate when playing DVD
discs furnished with certain software coding.This is
according to technical standards adopted by the set maker
and disc content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD disc which is not furnished with the
appropriate software coding.Also note that at the time of
release of this DVD player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis Philips cannot guarantee the functioning of
PARENTAL CONTROL system and denies any liability
associated with unintended watching of disc content.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated.The Disc will be played in
full.
Ratings 1 to 8:
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc.The alternative
must have the same rating or a lower one. If no suitable
alternative is found, play will stop and the 4-digit code has
to be entered.
6 Press OK or tto confirm, then press tagain to exit the
menu.
17
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Loading discs
Playing a Video CD
1 Press OPEN/CLOSE on the front of the player.The disc
Playing a disc
tray opens.
¶
After inserting the disc and closing the tray, playback starts
automatically and the status window and the player display
show the type of disc loaded, as well as information about
the disc’s contents and playing time.
The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate
numerical key.
The currently playing track number is displayed in the menu
bar and the player display.The elapsed playing time is shown
in the status window and the player display.
2 Load your chosen disc in the tray, label side up (also when a
double sided DVD is inserted). Make sure it is sitting
properly in the correct recess.
3 Press OPEN/CLOSE, to close the tray.
➜ READ appears in the status window and on the player
display, and playback starts automatically.
¶
¶
Note:
– If ‘Child Lock’ is set to ON and the disc inserted is not in the
‘child safe’ list (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see ‘Access
Control’).
¶
¶
To stop play at any time, press 9.
➜The default screen will then appear.
You can resume play from the point at which you stopped
play. Press 2; when you see the Resume icon .on the
screen, press 2again.
➜The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc, and press 2; when you see the Resume
icon .on the screen , press 2again.
Playing a DVD-video disc
Playing a title
¶
After inserting the disc and closing the tray, playback starts
automatically and the status window and the player display
show the type of disc loaded, as well as information about
the disc’s contents and playing time.
The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate
numerical key; if not, use the w/v, t/ukeys to highlight
your selection, then press OK.
¶
The currently playing title and chapter number are
displayed in the menu bar and the player display.
The elapsed playing time is shown in the status window and
the player display.
General features
¶
¶
¶
Play may stop at the end of theTitle, and the player may
return to the DVD menu.To go on to the next title, press
2.
To stop play at any other time, press 9.
➜The default screen will appear, giving information about
the current status of the player.
You can resume play from the point at which you stopped
play. Press 2; when you see the Resume icon .on the
screen, press 2again.
Note:
– Unless stated otherwise, all operations described are based
on remote control operation.A number of operations can also
be carried out via the menu bar on the screen (see ‘Menu bar
operation’).
Moving to another title/track
When a disc has more than one title or track (which you
can see from both the menu bar and the player display),
you can move to another title as follows:
PressT-C (TITLE/TRACK), then press Pbriefly during
play to select the next title/track.
PressT-C (TITLE/TRACK), then press Obriefly during
play to return to the beginning of the current title/track.
Press Otwice briefly to step back to the previous title/
track.
➜The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc, and press 2; when you see the Resume
icon .on the screen , press 2again.
¶
¶
Note:
– Since it is usual for DVD movies to be released at different
times in different regions of the world, all players have region
codes.
– Discs can have an optional region code. If you load a disc of
a different region code into your player, you will see the region
code notice on the screen.
T-C
à
í
á
ë
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
– The disc will not play and should be removed from the
player.
18
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Video CDs - Repeat track/disc
Moving to another chapter/index
¶
¶
¶
To repeat the track currently playing , press REPEAT.
➜ REPEAT TRACK appears on the player display.
To repeat the entire disc, press REPEAT a second time.
➜ REPEAT appears on display and screen.
When a title on a disc has more than one
chapter or a track has more than one
index (which you can see from the player
display and on the menu bar), you can
move to another chapter/index as follows:
T-C
à
í
á
ë
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
To exit Repeat mode, press REPEAT a third time.
¶
¶
Press Pbriefly during play to select the next chapter/
index.
Repeat A-B
à
á
ë
Press Obriefly during play to return to the beginning of
the current chapter/index. Press Otwice briefly to step
back to the previous chapter/index.
To go directly to any chapter or index, selectT-C
(CHAPTER/INDEX), then enter the chapter/index
number using the numerical keys (0-9).
To repeat a sequence in a title:
Press REPEAT A-B at your chosen starting
point;
➜ A- appears briefly on the screen.
Press REPEAT A-B again at your chosen end point;
➜ A-B REPEAT appears briefly on the display, and the repeat
sequence begins.(A-B REPEAT is displayed on the front panel
of the player)
í
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
¶
¶
¶
Note:
– If the number has more than one digit, press the keys in
rapid succession.
¶
To exit the sequence, press REPEAT A-B.
à
í
á
ë
Shuffle
Ç
É
Å
Still Picture and Frame-by-frame playback
SHUFFLE
REPEAT REPEAT
A-B
DVD-Video discs
T-C
¶
¶
Select e (PICTURE BY PICTURE)
in the menu bar.
Use the wkey to enter the picture by
picture menu.
➜The player will now go into PAUSE mode.
This shuffles the playing order of chapters
within a title, if the title has more than one.
Press SHUFFLE during play.
➜ SHUFFLE appears on the screen for about 2 seconds.
To return to normal play, press SHUFFLE again.
à
í
á
ë
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
¶
¶
¶
¶
Use the cursor keys tuto select the previous or next
picture frame.
Video CDs
To exit PICTURE BY PICTURE mode, press 2or v.
This shuffles the playing order of the tracks, if the disc has
more than one.
You can also step forward by pressing ;repeatedly on the
remote control.
¶
¶
Press SHUFFLE during play.
➜ SHUFFLE appears on the screen for about 2 seconds.
To return to normal play, press SHUFFLE again.
Search
à
í
á
ë
Ç
É
Å
¶
¶
¶
Select g (FAST MOTION) in the
menu bar.
SHUFFLE
REPEAT REPEAT
A-B
Time search
Use the wkeys to enter the FAST
MOTION menu.
Use the tukeys to select the required speed: -32, -8 or -4
(backward), or +4, +8, +32 (forward).
TheTime Search function allows you to start playing at any
chosen time on the disc.
Select h (TIME SEARCH) in the menu bar.
Press w.
¶
¶
¶
¶
Select 1 to play at normal speed again.
To exit FAST MOTION mode, press 2or v.
➜The player will now go into PAUSE mode.
➜ A time edit box appears on the screen, showing the
elapsed playing time of the current disc.
Use the digit keys to enter the required start time. Enter
hours, minutes and seconds from left to right in the box.
➜ Each time an item has been entered, the next item will
be highlighted.
Press OK to confirm the start time.
➜The time edit box will disappear and play starts from the
selected time position on the disc.
To search forward or backward through different speeds,
you can also hold down Qor R.
¶
¶
Repeat
à
í
á
ë
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
DVD-Video Discs - Repeat chapter/
title/disc
To repeat the currently playing chapter,
press REPEAT.
➜ REPEAT CHAPTER appears on the player display.
To repeat the title currently playing , press REPEAT a
second time
¶
¶
➜ REPEAT TITLE appears on the display.
To repeat the entire disc, press REPEAT a third time
➜ REPEAT appears on the display.
¶
¶
To exit Repeat mode, press REPEAT a fourth time.
19
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing chapters/indexes
Zoom
T-C
¶
Press won the selected title number.
à
í
á
ë
The Zoom function allows you to enlarge
the video image and to pan through the
enlarged image.
Ç
É
Å
➜The title number will be marked and the highlight moves
to the first available chapter number for this title.
Use uand tto select the required chapter number.
Press OK to confirm the selection.
➜The title/chapter selection will be added to the list of
selections.
SHUFFLE
REPEAT REPEAT
A-B
¶
¶
¶
¶
Select a (ZOOM).
Press w/vto activate the ZOOM function and select the
required zoom factor: 1.33 or 2 or 4.
➜The player will go into Pause mode.
➜The selected zoom factor appears below the Zoom icon
in the menu bar and ‘Press OK to pan’ appears below the
menu bar.
¶
Press MENU OSD to exit the VIDEO FTS c menu.
Erasing a FTS-Video Program
¶
¶
¶
¶
¶
In STOP mode, select VIDEO FTS c in the menu bar.
Use wto select PROGRAM.
Use uand tto select the required selection number.
Press OK to erase the selection.
➜The picture will change accordingly.
Press OK to confirm the selection.
➜The panning icons appear on the screen: tuwvand
OK.
Use the tuwvkeys to pan across the screen.
When OK is pressed only the zoomed picture will be
shown on the screen.
¶
Press MENU OSD to exit.
¶
¶
If you wish to erase all selections:
¶
¶
If you wish to zoom at any moment, press a (ZOOM)
and select the required zoom factor as described above.
To exit ZOOM mode:
– Press 2.
➜ Playback will resume.
¶
¶
¶
In STOP mode, select VIDEO FTS c in the menu bar.
Use wto select CLEAR ALL.
Press OK.
➜ All selections will now be erased.
Press MENU OSD to exit.
¶
– Press STOP, MENU OSD.
Special DVD features
Checking the contents of DVD-Video discs:
Menus
FTS-Video
For titles and chapters, selection menus may be included on
the disc.The DVD’s menu feature allows you to make
selections from these menus. Press the appropriate
numerical key; or use the w, v, u, tkeys to highlight your
selection, then press OK.
¶
The FTS-Video function allows you to store your favorite
titles and chapters (DVD) and favorite tracks and indexes
(VCD) for a particular disc in the player memory.
Each FTS program can contain 20 items (titles, chapters).
Each time an FTS program is played it will be placed on top
of the list.When the list is full and a new program is added,
the last program in the list will be removed from the list.
The selections can be called up and played at any time.
¶
¶
1
4
2
5
8
0
3
6
9
Title menus
7
¶
Press MENU DVD.
➜ If the current title has a menu, the
¶
MENU
DVD
MENU
OSD
menu will appear on the screen. If no menu is present in
the title, the disc menu will be displayed.
The menu can list camera angles, spoken language and
subtitle options, and chapters for the title.
To remove the title menu, press MENU DVD again.
Storing a FTS-Video Program
¶
¶
In STOP mode, select VIDEO FTS c in the menu bar.
Press wto open the menu.
➜The VIDEO FTS menu appears.
¶
¶
¶
Press uor tor FTS to select ON or OFF.
Disc menu
Storing titles/tracks
¶
¶
¶
Press wto select TITLES.
¶
¶
PressT-C then press MENU DVD.
➜The disc menu is displayed.
To remove the disc menu, pressT-C, then press MENU
DVD.
Use uand tto select the required title.
Press OK if you wish to store the entire title.
➜The title number will be added to the list of selections.
20
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Angle
Playing an audio CD
If the disc contains sequences recorded from different
camera angles, the angle icon appears, showing the number
of available angles and the angle being shown currently.You
can then change the camera angle if you wish.
Use the w/vkeys to select the required angle in the angle
icon.
➜ After a small delay, play changes to the selected angle.
The angleicon remains displayed until multiple angles are
no longer available.
¶
¶
¶
After loading the disc, playback starts automatically.
If theTV is on, the Audio CD screen appears.
The number of tracks and the total playing time will be
shown on the screen.
During play, the current track number and its elapsed
playing time will be shown on the screen and on the player
display.
¶
¶
¶
¶
Playback will stop at the end of the disc.
To stop play at any other time, press 9.
Changing the audio language
¶
¶
Select Y (AUDIO) in the menu bar.
Press Y or w/vrepeatedly to see the different languages.
T-C
Pause
à
í
á
ë
Ç
É
Å
¶
¶
Press ;during play.
SHUFFLE
REPEAT REPEAT
A-B
To return to play, press 2.
Subtitles
Search
¶
¶
Select Z (SUBTITLE) in the menu bar.
Press Z or w/vrepeatedly to see the different subtitles.
T-C
¶
To search forward or backward through
the disc at four times normal speed, hold
down 5or 6for about one second
during play.
à
á
ë
í
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
➜ Search begins, and sound is partially muted.
¶
To step up to eight times the normal speed, press 5or 6
again.
Special VCD-Features
➜ Search goes to eight times the speed, and the sound is
muted.
¶
¶
¶
To return to four times the normal speed, press 5or 6
again.
If theTV is on, search speed and direction are indicated on
the screen each time 5or 6is pressed.
To end the search, press 2to resume playback or 9to
stop.
Playback Control (PBC)
¶
¶
Load aVideo CD with PBC and press 2.
Go through the menu with the keys indicated on theTV
screen until your chosen passage starts to play. If a PBC
menu consists of a list of titles, you can select a title directly.
Enter your choice with the numerical keys (0-9).
Press RETURN to go back to the previous menu.
You may also set to PBC OFF under Personal
Preferences.
¶
¶
¶
Moving to another track
T-C
¶
¶
Press Pbriefly during play to go to the
next track.
Press Obriefly during play to return to
the beginning of the current track. Press O
à
í
á
ë
Ç
É
Å
SHUFFLE
REPEAT REPEAT
A-B
twice briefly to step back to the previous track.
¶
To go directly to any track, enter the track number using
the numerical keys (0-9).
21
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Shuffle
FTS Program
T-C
à
í
á
ë
¶
¶
Press SHUFFLE during play.
➜The order of the tracks is changed.
To return to normal play, press SHUFFLE
again.
Ç
É
Å
¶
¶
FTS Program allows you to store your favorite tracks for a
particular disc in the player memory.
Each FTS Program can contain 20 tracks.
SHUFFLE
REPEAT REPEAT
A-B
Repeat track/disc
¶
¶
¶
To repeat the track currently playing ,
press REPEAT.
➜ REPEAT TRACK appears on the display.
To repeat the entire disc, press REPEAT a
second time.
à
á
ë
í
Ç
É
SHUFFLE
REPEAT REPEAT
A-B
Å
➜ REPEAT appears on the display.
To exit Repeat mode, press REPEAT a third time.
Storing an FTS Program
1 Load a disc and stop playback.
2 Use wto go to the list of available tracks.
3 Use uor tto select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
Repeat A-B
à
í
á
ë
Ç
É
SHUFFLE
REPEAT REPEAT
A-B
To repeat a sequence:
Press REPEAT A-B at your chosen starting
point;
Å
¶
¶
¶
➜ A- appears on the player display.
Press REPEAT A-B again at your chosen end point;
➜ A-B appears on the display, and the sequence begins to
play repeatedly.
To exit the sequence, press REPEAT A-B again.
4 Store each track by pressing OK.
➜The track numbers will be added to the list of selected
tracks.
➜The number of tracks and the playing time of the
program will be shown on the screen and the player display.
When your FTS Program is complete, press 2to start play,
or vto go back to Stop mode. In either case, the FTS
Program will be automatically memorized.
Switching FTS ON/OFF
1 Use vwto move to the top.
2 Use uor tto select either ON or OFF.
Erasing a track from an FTS Program
1 Use wto go to the list of selected tracks.
2 Use uand tto select the track number you wish to erase.
3 Press OK.
➜The track number will be erased from the list of selected
tracks.
Erasing the complete program
1 Use wto select CLEAR ALL, then press OK.
➜The complete FTS Program for the disc will be erased.
22
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under
no circumstances attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).
Symptom
Remedy
No power
¶ Make sure the mains cord (AC) is properly connected.
¶ Check if there is power at the AC outlet by plugging in another appliance.
No picture
¶ Check if theTV is switched on.
¶ Check the video connection.
Distorted picture
¶ Check the disc for fingerprints and clean with a soft cloth, wiping from center
to edge.
¶ Sometimes a small amount of picture distortion may appear .This is not a
malfunction.
Completely distorted picture
or no color with player menu.
¶ If the picture is distorted completely or if the picture rolls vertically,
make sure the NTSC/PAL setting at the DVD player matches the video
signal of your television.
¶ If yourTV video signal is NTSC, select the NTSC setting at the DVD player.
¶ If your video signal is PAL, select the PAL setting - see NTSC/PAL SETTINGS.
Distorted or Black/White picture
with DVD orVideo CD.
¶ The disc format does not match yourTV’s video signal (PAL/NTSC).
No sound
¶ Check audio connections.
¶ If you are using a HiFi amplifier, try another sound source.
Distorted sound from HiFi
amplifier.
¶ Check to make sure that no audio connections are made to the amplifier
phono input.
No audio at digital output.
¶ Check the digital connections.
¶ Check the settings menu to make sure the digital output is set to ALL or
PCM.
¶ Check if the audio format of the selected audio language matches your
receiver capabilities.
Disc can’t be played.
¶ Ensure the disc label is facing up.
¶ Clean the disc.
¶ Check if the disc is defective by trying another disc.
¶ Check to see if the disc is defective, badly scratched or warped (not flat)
No return to start-up screen when
disc is removed.
¶ Reset by switching the player off, then on again.
¶ Check to see if the program requires another disc to be loaded.
The player does not respond to
the remote control.
¶ Aim the remote control directly at the sensor on the front of the player.
¶ Remove any obstacles between the player and the remote control.
¶ Inspect or replace the batteries in the remote control.
Buttons do not work.
¶ In order to completely reset the player, unplug the AC cord from the AC
outlet. (Please ensure that the set is not in Initial Setup mode)
Player does not respond to all
operating commands during
playback.
¶ Operations are not permitted by the disc. Refer to the instructions of
the disc.
DVD-Video player cannot read
CDs/DVDs
¶ Use a commonly available cleaning CD/DVD to clean the lens before
correctly taking the DVD-Video player to be repaired.
23
Download from Www.Somanuals.com. All Manuals Search AndBDoEwFnOloaRdE. REQUESTING SERVICE
Specification
PLAYBACK SYSTEM
DVD-Video
CONNECTIONS
SCART
2 SCART
Video CD
CD (CD-R and CD-RW)
S-Video Output
Video Output
Audio L+R output
Digital Output
Mini DIN, 4 pins
Cinch (yellow)
Cinch (white/red)
1 coaxial, 1 optical
IEC958 for CDDA / LPCM
IEC1937 for MPEG1, MPEG2 and AC-3
DTS
OPTICAL READOUT SYSTEM
Lasertype
Numerical Aperture
Semiconductor AlGaAs
0.60 (DVD)
0.45 (VCD/CD)
650 nm (DVD)
780 nm (VCD/CD)
Wavelength
Cinemalink
Headphone
on SCART
6.3 mm Jack
DVD DISC FORMAT
Medium
Diameter
Playing time
(12cm)
CABINET
Dimensions (w x h x d)
Weight
Optical Disc
12cm (8cm)
One layer
Dual layer
Two side
435 x 92 x 320mm
Approx. 4 Kg
2.15 h*
4 h*
4.30 h*
GENERAL FUNCTIONALITY
Stop / Play / Pause
Single layer
Two side
Fast Forward / Backward
Time search
8 h*
Dual layer
Step Forward / Backward
Title / Chapter /Track Select
Next / Previous
VIDEO FORMAT
DA Converter
Signal handling
10 bits
Repeat (Chapter /Title / All) or (Track / All)
A-B Repeat
Shuffle
Enhanced ease of use graphical interface
Perfect Still with digital multi-tap filter
Zoom (xl.33, x2. x4) with picture enhancement
Personal Color settings (Smart Picture)
Cinemalink interconnection for plug&play
3D Sound
Components
MPEG2 for DVD,
MPEG1 forVCD
Digital Compression
TV STANDARD
Number of lines
Playback
(PAL/50Hz)
625
Multistandard
(NTSC/60Hz)
525
(PAL/NTSC)
DVD
Virtual Jog Shuttle
Horiz. Resolution
Vertical Resolution
720 pixels**
576 lines
720 pixels**
480 lines
Audio and video bit rate indicator
Beeper
VCD
DVD FUNCTIONALITY
Horiz. Resolution
Vertical Resolution
352 pixels
288 lines
352 pixels
240 lines
Multi-angle Selection
Audio Selection (1 out of max. 8 languages)
Subtitles Selection (1 out of max. 32 languages)
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan)
Parental Control and Disk Lock
Disc Menu support (Title Menu and Root Menu)
Resume (5 discs) after stop / standby
Screen Saver (Dim 75% after 15 min.)
ProgrammingTitles/chapters with Favorite Selection
VIDEO PERFORMANCE
Video output
S-Video output
1Vpp into 75 ohm
Y: 1Vpp into 75 ohm
C: 0.3Vpp into 75 ohm
0.7Vpp into 75 ohm
On/Off
RGB output
Black Level Shift
Video Shift
Left/Right
VIDEO CD FUNCTIONALITY
Playback Control forVCD 2.0 discs
Disc Lock
AUDIO FORMAT
Digital
MPEG
Compressed Digital
DTS/AC-3
PCM
Resume (5 discs) after stop / standby
Screen Saver (Dim 75% after 15 min.)
ProgrammingTracks with Favorite Selection
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
Analog Sound Stereo
Dolby Pro Logic downmix from multi-channel sound
AUDIO CD FUNCTIONALITY
3D Sound for virtual 5.1 channel sound on 2 speakers (AC-3)
Time Display (Total /Track / RemainingTrackTime)
Full audio functionality with remote control
Programming with FavoriteTrack Selection
AUDIO PERFORMANCE
DA Converter
DVD
24 bits
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
103 dB
98 dB
115 dB
95 dB
Specifications subject to change without prior notice
Video CD
CD
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Crosstalk (1kHz)
Distortion and Noise (1kHz)
Headphone
30mW at 32 Ohm load,
headphone imp. 8-2k Ohm
*
typical playing time for movie with 2 spoken languages and 3 subtitle languages.
** equivalent to 500 lines on yourTV
24
SPECIFICATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|