MCD728
DVD MicroTheatre
Register your product and get support at
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------7
------------------------------------------------- 42
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
IMPORTANT!
Region Codes
– Depending on the DVD orVIDEO CD,
some operations may be different or
restricted.
– Do not push on the disc tray or put
any objects other than disc on the disc
tray. Doing so may cause the disc player
malfunction.
– If the inhibit icon (ø) appears on the
TV screen when a button is pressed, it
means the function is not available on
the current disc or at the current time.
DVDs must be labeled as shown below in order
to play on this DVD system.You cannot play
discs that are labeled for other regions.
ALL
6
Note:
– If you are having trouble playing a certain disc,
remove the disc and try a different one. Improper
formatted disc will not play on this DVD Player.
Playable Discs
Playing discs
Your DVD Player will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs + Rewritable (DVD+RW)
– Compact Discs (CDs)
1 Connect the power cords of the system andTV
(or any optional stereo or AV receiver) to a
power outlet.
2 Turn on theTV power and set to the correct
Video In channel. (See “Setting up theTV”).
–
Picture (Kodak, JPEG) files on CDR(W)
3 Press STANDBY-ON B on the DVD Player
front panel or B on the remote.
– DivX(R) disc on CD-R(W):
– DivX 3.11, 4.x and 5.x
– WMA
➜ You should see the blue Philips DVD
background screen on theTV.
– Supported MP3-CD format.
•
•
ISO 9660
4 Press OPEN•CLOSE ç to open the disc tray
and load in a disc, then press the same button
again to close the disc tray.
Max. title/album name –12 characters
Max. title number plus album is 255.
Max. nested directory is 8 levels.
The max. album number is 32.
The max. MP3 track number is 999.
Supported sampling frequencies for MP3 disc:
32 kHz, 44.1 kHz, 48 kHz.
•
•
•
•
➜ Make sure the label side is facing up.
5 Playback will start automatically (depending on
the disc type).
➜ If a disc menu appears on theTV, see“Using
the Disc Menu”.
➜ If the disc is locked by parental control, you
must enter your four-digit password. (See
“PASSWORD SETUP PAGE”).
•
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
– Following formats can’t be supported
•
The files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV
Non-English Album/Title name
The discs recorded under Joliet format
MP3 Pro and MP3 with ID3 tag
6 At any time, simply press PRESET -/ 9 to stop
•
•
•
playback.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Resuming playback from the last
stopped point (DVD/VCD/CD)
Using the Disc Menu
Depending on the disc, a menu may appear on
theTV screen once you load the disc.
●
●
In stop mode and when a disc has not been
removed, pressÉÅ.
To select a playback feature or item
To cancel resume mode
●
●
Use 1 2 3 4and OK or Numeric Keypad
(0-9) on the remote.
In stop mode, press PRESET -/ 9 again.
➜ Playback will start automatically.
Zoom (DVD/VCD/DivX/JPEG)
To access or exit from the menu
Zooming allows you to enlarge or reduce the
video image during playback.
Press DISC MENU on the remote.
1 Press ZOOM repeatedly to enlarge or reduce
ForVCD with Playback Control (PBC)
feature (version 2.0 only)
the playback video image.
2 Press 1 2 3 4to pan across theTV screen.
PBC playback allows you to playVideo CDs
interactively, following the menu on the display.
Repeat (DVD/VCD/CD/MP3/DivX/
WMA)
●
During playback, press DISC MENU.
➜ If PBC was ON, it will switch to OFF and
continue playback.
For DVD/VCD/CD
➜ If PBC was OFF, it will switch to ON and
return to menu screen.
●
Press MODE repeatedly to choose a repeat
mode during playback.
Chapter (DVD)
– to repeat playback of the current chapter.
Basic playback controls
Pausing playback (DVD/VCD/CD/MP3/
DivX/WMA)
Track (CD/VCD)/Title (DVD)
– to repeat playback of the current track (CD/
SVCD/VCD)/title (DVD).
1 During playback, press ÉÅ.
All
➜ Playback will pause and sound will be muted.
– to repeat playback of all the disc.
2 Press ÉÅagain to resume.
Shuffle
– to repeat playback at random order.
Selecting a track/chapter/title (DVD/
VCD/DivX/CD)
For MP3/WMA/DivX
●
Press MODE continuously to access different
repeat modes.
1 Press ™ during playback to go to the next
chapter/track
➜ Shuffle: play all files in the selected folder in
random order.
2 Press ¡ to go to the previous chapter/track.
➜ Repeat One: play an MP3/WMA file
repeatedly.
➜ Repeat All: play all files repeatedly.
➜ Off: switches off the shuffle or repeat mode.
3 To go directly to any chapter/track/title, enter the
chapter/track/title number using the Numeric
Keypad (0-9).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
For MP3/WMA
Repeat A-B (DVD/VCD/CD/MP3/DivX/
WMA)
1 In Stop mode, press DISC MENU to switch
the menu between Album and Filelist.
1 Press A-B at your chosen starting point.
2 When Filelist is on the screen, press 3 4to
select the files and press PROGRAM to add
the files to the program list.
2 Press A-B again at your chosen end point.
➜ The section A and B can be set only within
the same chapter/track.
➜ The section will now repeat continuously.
3 Press DISC MENU to display the program list.
3 To exit the sequence, press A-B again.
4 Press PROGRAM to delete unwanted files
from the program list.
Slow Motion (DVD/VCD)
Forward/Reverse Searching (DVD/VCD/
DivX/CD/MP3/WMA)
1 Press SLOW during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16 (backward
or forward).
1 Press 1 2on the remote during playback to
select the required speed: 2X, 4X, 8X, 16X or
32X (backward or forward).
➜ Sound will be muted.
2 To return to normal speed, press ÉÅ.
➜ Sound will be muted.
Note:
2 To return to normal speed, press ÉÅ.
– Slow backward is not possible onVCDs.
Time search & search by chapter/track
number (DVD/VCD/CD/MP3/WMA)
Program (not for Picture CD)
To select favourite tracks/chapters for playback in
preferred sequence.
1 Press GOTO/STEREO until the time or
chapter/track edit box appears.
2 Enter hours, minutes and seconds from left to
right in the time edit box using remote control
numerical keypad.
For DVD/VCD/CD
OR
Enter your desired chapter/track number in the
chapter/track edit box using remote control
numerical keypad.
Information display during playback
(not for Picture CD)
●
During playback, press DISPLAY to show disc
information on theTV screen.
(DVD program for example)
1 Press PROGRAM on the remote control to
For DVD
enter the program mode.
➜ Title/Chapter Elapsed: displays the
elapsed time of the current title/chapter.
➜ Title/Chapter Remain: displays the
remaining time of the current title/chapter.
➜ Display Off: switches time display off.
2 Use the Numerical Keypad (0-9) to directly
input the tracks or chapters (single track number
with digit “0” in front, for example “05”).
3 Move the cursor by pressing 1 2 3 4to
select START.
4 Press OK to start playback.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
For SuperVCD/VCD/DivX/CD
➜ Single/Total Elapsed: displays the elapsed
time of the current single/total track.
➜ Single/Total Remain: displays the
remaining time of the current single/total track.
➜ Display Off: switches time display off.
Playing MP3/WMA disc
IMPORTANT!
For DRM protectedWMA files, use
Windows Media Player 10 (or later) for
CD burning/conversion.Visit
Windows Media Player andWM DRM
(Windows Media Digital Rights
Management).
Special disc features
Playing aTitle (DVD)
1 Press DISC MENU.
General operation
➜ The disc title menu appears on theTV screen.
1 Load an MP3/WMA disc.
➜ The data disc menu appears on theTV
screen.
2 Use 1 2 3 4 or Numeric Keypad (0-9) to
select a play option.
3 Press OK to confirm.
2 Use 3 4to select an album and press OK to
open the album.
Camera Angle (DVD)
●
●
●
●
Press ANGLE repeatedly to select different
desired angle.
Changing the Audio Language (for
DVD recorded with multiple languages)
Press AUDIO repeatedly to select different
audio languages.
Changing the Audio Channel (forVCD
only)
3 Press 3 4or use the Numeric Keypad (0-9)
Press AUDIO to select the available audio
channels provided by the disc (Mono Left, Mono
Right or Stereo).
to highlight a track.
4 Press OK to confirm.
➜ The playback will start from the selected
track to the end of the album.
Subtitles (DVD)
Press SUBTITLE repeatedly to select different
subtitle languages.
Note:
– The disc reading time may exceed 10 seconds
due to large number of songs compiled onto the
disc.
Playing MP3/WMA/JPEG Picture
CD
Playback selection
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See
“Setting up theTV”).
During playback, you can:
●
Press ¡ / ™ to select another track in the
current album.
●
●
Press ÉÅrepeatedly to pause/resume playback.
Press DISC MENU on the remote to switch
between Album and Filelist.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
To enter the remote key function menu
Use 1 2 3 4to highlight “Menu” and press
OK.
Playing JPEG Picture CD
●
General operation
1 Load a JPEG Picture CD.
➜ The data disc menu appears on theTV
screen.
2 Use 3 4 to select a folder and press OK to
open the folder.
3 Press 3 4 or use the Numeric Keypad (0-9)
to highlight a picture file.
4 Press OK to confirm.
➜ The playback will start from the selected
picture to the end of the folder.
To display the other pictures on the
previous/next page
Playback selection
●
●
Press ¡ / ™.
During playback, you can:
Use 1 2 3 4to highlight “Prev” or “Next” and
●
●
Press ¡ / ™ to select another file in the current
folder.
press OK.
Zoom picture (JPEG)
Use 1 2on the remote to rotate/flip the
picture files.
●
●
During playback, press ZOOM repeatedly to
display the picture with different scales.
●
●
Press ÉÅrepeatedly to pause/resume playback.
Use 1 2 3 4to view the zoomed picture.
Press DISC MENU on the remote to switch
between Folder and Filelist.
Playback with multi-angles (JPEG)
Special JPEG features
●
During playback, press 1 2 to rotate the
picture on theTV screen.
1: rotate the picture anti-clockwise.
2: rotate the picture clockwise.
Preview function (JPEG)
This function shows the content of the current
folder or the whole disc.
1 Press PRESET- / 9 during playback.
➜ Thumbnails of 12 pictures appears on theTV
screen.
2 Use 1 2 3 4to highlight one of the pictures/
”Slide Show” and press OK to start playback/
slide show.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Playing a DivX disc
This DVD player supports the DivX movie
playback that you download from your
computer onto a CD-R/RW (see “System Menu
Options-DIVX(R)VOD registration code” for
more information).
1 Load a DivX disc.
➜ Playback will start automatically. If not press
ÉÅ.
2 If the DivX movie contains external subtitles, the
subtitle menu will appear on theTV screen for
your selection.
●
In this case, pressing SUBTITLE on the remote
control will turn on or off the subtitle.
●
If multilingual subtitles are embedded on the
DivX disc, pressing SUBTITLE will change the
subtitle language during playback.
Note:
– Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .ass) are supported
but do not appear on the file navigation menu.
– The subtitle filename have to be the same as
the filename of the movie.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
Basic operations
TV DISPLAY
1 Press SYSTEM MENU to enter the Setup
Set the aspect ratio of the DVD Player according
to theTV you have connected.
Menu.
➜ NORMAL/PS: If you have a normalTV and
want both sides of the picture to be trimmed or
formatted to fit yourTV screen.
2 Press 1 2 to select a page to be set.
3 Press 3 4 to highlight an option.
4 Enter its submenu by pressing 2or OK.
5 Move the cursor by pressing 3 4 to highlight
the selected item.
➜ In cases of value setting, press 1 2to adjust
values.
➜ 4:3 NORMAL/LB: If you have a normalTV.
In this case, a wide picture with black bands on
the upper and lower portions of theTV screen
will be displayed.
6 Press OK to confirm.
To return to the upper-level menu
●
●
Press 1 or OK (in cases of value adjustment).
To exit from the menu
Press SYSTEM MENU again.
➜ The settings will be stored in the player’s
memory even if the player is switched off.
➜ WIDE: If you have a wide-screenTV.
Note:
– Some of the features in the System Menu
Options are described in “Getting Started”.
OSD LANGUAGE
GENERAL SETUP PAGE
See“Getting Started-Step 3: Setting language
preference”.
The options included in GENERAL SETUP PAGE
are:“TV DISPLAY”,“OSD LANGUAGE”,
“SCREEN SAVER”and “DIVX CODE”.
SCREEN SAVER
This function is used to turn the screen saver on
or off.
➜ ON: In STOP, PAUSE or No DISC mode, if
no actions are performed about 3 minutes, the
screen saver will be activated.
➜ OFF: Screen saver is disabled.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
DIVX CODE
ANALOG AUDIO SETUP
Philips provides you the DivX® VOD (Video On
Demand) registration code that allows you to
rent and purchase videos using the DivX® VOD
service.
The options included in ANALOG AUDIO
SETUP page are:“LT/RT”,“STEREO”,“DVS
REFER. MODE” and “DVS WIDE MODE”.
vod.
1 In ‘GENERAL SETUP PAGE’, press 3 4to
highlight DIVX Code, then press 2or OK to
ener its submenu and press OK again to
confirm.
ANALOG AUDIO SETUP PAGE
DOWNMIX
LT/RT
STEREO
DVS REFER. MODE
DVS WIDE MODE
➜ The registration code will appear.
➜ LT/RT: Selects the mixed sound output
mode.
➜ STEREO: Selects the ordinary stereo sound
output.
➜ DVS REFER MODE: Creates a highly
compelling 5.1-channel listening environment
similar to a small and well-damped room.
➜ DVSWIDE MODE: Creates a highly
compelling 5.1-channel listening environment
similar to a larger room.
2 Press OK to exit.
3 Use the registration code to purchase or rent
the videos from DivX® VOD service at
download the video onto a CD-R for playback
on this DVD player.
SPDIF SETUP
The options included in SPDIF SETUP page are:
“SPDIF OFF”,“SPDIF/RAW” and “SPDIF/PCM”.
Notes:
– All the downloaded videos from DivX® VOD can
only be played back on this DVD player.
– Time search feature is not available during
DivX movie playback.
AUDIO SETUP PAGE
The options included in AUDIO SETUP PAGE
are:“ANALOG AUDIO SETUP”,“SPDIF
SETUP”,“DOLBY DIGITAL SETUP”,“3D
PROCESSING”,“HDCD” and “NIGHT MODE”.
➜ SPDIF OFF:Turns off the SPDIF output.
➜ SPDIF/RAW: If you have connected your
DIGITAL OUT (COAXIAL or OPTICAL) to a
multi-channel decoder/receiver.
➜ SPDIF/PCM: Only if your receiver is not
capable of decoding multi-channel audio.
ANALOG AUDIO SETUP
3D PROCESSING
30
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
HDCD
DOLBY DIGITAL SETUP
The option included in HDCD (High Definition
Compatible Digital) is: “FILTER”.
The option included in DOLBY DIGITAL SETUP
is:“DUAL MONO”.
DUAL MONO
FILTER
Sets the audio output cutoff frequency point
when playing an HDCD disc.
Select the setting that matches the number of
speakers you have connected.
➜ OFF, 44.1K and 88.2K.
➜ STEREO: Left mono sound will send output
signals to Left speaker and Right mono sound
will send output signals to Right speaker.
➜ L-MONO: Left mono sound will send
output signals to Left speaker and Right speaker.
➜ R-MONO: Right mono sound will send
output signals to Left speaker and Right speaker.
NIGHT MODE
In this mode, the high volume outputs are
softened and low volume outputs are brought
upward to an audible level. It is useful for
watching your favourite action movie without
disturbing others at night.
➜ ON: Select this to level out the volume.This
feature is only available for movies with Dolby
Digital mode.
3D PROCESSING
The option included in 3D PROCESSING page
is: “REVERB MODE”.
➜ OFF: Select this when you want to enjoy the
surround sound with its full dynamic range.
VIDEO SETUP PAGE
The options included in VIDEO SETUP PAGE
are:“COMPONENT”,“TV MODE”,“PICTURE
SETTING” and “HDMI SETUP”.
REVERB MODE
Reverb mode provides a virtual surround sound
experience using just two speakers.
➜ OFF, CONCERT,LIVING ROOM,
HALL, BATHROOM, CAVE, ARENA and
CHURCH.
PICTURE SETTING
COMPONENT
Sets the video output according to your video
connection.This setting is not required if you are
using the VIDEO jack (yellow) to connect the
31
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
SHARPNESS
DVD micro system to yourTV.
Adjusts the sharpness level.
➜ HIGH, MEDIUM and LOW.
➜ S-VIDEO: Select this if you have connected
the DVD micro system to yourTV using S-Video
jack.
➜ Pr/Cr Pb/CbY: Select this if you have
connected the DVD micro system to yourTV
using Component video jacks.
BRIGHTNESS
Adjusts the brightness level. Range: -20-+20.
CONTRAST
Adjusts the contrast level. Range: -16-+16.
Notes:
GAMMA
– When the player is set toY Pb Pr (YUV), some
TV may not properly synchronise with the player
on the SCART connector.
– This option is available only when the "HDMI"
is set to "OFF".
Adjusts the gamma level.
➜ HIGH, MEDIUM, LOW and NONE.
HUE
Adjusts the hue level. Range: -9-+9.
SATURATION
Adjusts the saturation level. Range: -9-+9.
TV MODE
LUMA DELAY
Adjusts the luma delay.
➜ 0T and 1T.
Selects interlace or P-SCAN video output mode
when Pr/Cr Pb/CbY is selected.
➜ P-SCAN and INTERLACE.
In the progressive scan mode, you can enjoy the
high quality picture with less flickers. It only
works when you have connected the DVD
player'sY Pb Pr jacks to yourTV that supports
the progressive video input. Otherwise, a
distorted picture will appear on theTV. For
proper progressive scan set up, see “Getting
started-Setting up Progressive Scan feature”.
HDMI SETUP
The options included in HDMI SETUP Page are:
"HDMI" and "RESOLUTION".
HDMI
This option is used to enable/disable HDMI
output.
➜ ON: Enables HDMI output.
➜ OFF: Disables HDMI output.
Note:
– This option is available only when the "HDMI"
is set to "OFF".
RESOLUTION
You can select the resolution of the picture
according to your preference and the connected
HDMITV.
The resolution options include 480p (60Hz),
720p (60Hz), 1080i (60Hz), 576p (50Hz), 720p
(50Hz) and 1080i (50Hz).
PICTURE SETTING
This menu helps you to set the video quality.
1 Press 3 4 to highlight “PICTURE SETTING”.
2 Press 2 or OK to enter PICTURE SETTING.
The options included in PICTURE SETTING
page are:“SHARPNESS”,“BRIGHTNESS”,
“CONTRAST”,“GAMMA”,“HUE”,
Notes:
– This option is available only when the "HDMI"
is set to "ON".
“SATURATION” and “LUMA DELAY”.
– If no display appears on theTV screen due to
unsupported resolution, reconnect any available
interlace video output to your display and re-adjust
the resolution settings to 480p/576p.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
➜ DVDs that are rated above the level you
selected will not play unless you enter your four-
digit password and choose a higher level rating.
PREFERENCE PAGE
The options included in Preference page are:“TV
TYPE”,“AUDIO”,“SUBTITLE”,“DISC MENU”,
“PARENTAL”,“DEFAULT” and “PASSWORD
SETUP”.
Note:
– Some DVDs are not encoded with a rating
though the movie rating may be printed on the
Disc cover.The rating level feature does not work
for such Discs.
Rating explanations
1 KID SAF
– Kids material; recommended especially for
children and viewers of all ages.
Note:
2 G
– Preference features can be selected only when
no disc is in the player or when playback has
stopped completely.
– General Audience; recommended as
acceptable for viewers of all ages.
3 PG
PARENTAL
– Parental Guidance suggested.
4 PG 13
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on the
disc.This feature lets you set a playback limitation
level.
– Material is unsuitable for children under age
13.
5-6 PGR, R
– Parental Guidance - Restricted;
recommended that parents restrict children
under 17 from viewing or allow to view only
when supervised by a parent or adult guardian.
The rating levels are from 1 to 8 and are
country dependent.You can prohibit the playing
of certain discs that are not suitable for your
children or have certain discs played with
alternative scenes.
7 NC-17
– No children under age 17; not recommended
viewing for children under age 17.
8 Adult
– Mature materials; should be viewed only by
adults due to graphic sexual material, violence or
language.
●
VCD, SVCD and CD have no level indication, so
parental control function has no effect on those
kinds of discs.This applies to most illegal DVD
discs.
1 Press 3 4 to highlight “PARENTAL”.
2 Enter its submenu by pressing 2.
3 Use 3 4 to highlight a rating level for the disc
inserted.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Options
3 Press OK to open the page for inputting a new
DEFAULT
password.
Setting the “DEFAULT” function will reset all
options and your personal settings to the factory
defaults and all your personal settings will be
erased.
Caution!
– When this function is activated, all
settings will be reset to factory defaults.
PASSWORD SETUP
4 Enter the existing 4-digit code.
The options included in Password Setup page
are:“PASSWORD MODE” and “PASSWORD”.
5 Enter the new 4-digit code.
6 Enter the new 4-digit code a second time to
confirm.
➜ The new 4-digit code will take effect.
7 Press OK to exit.
Notes:
– If the password has been changed, the parental
and disc lock code will also be changed.
– The default password (1234) is always active
even the password has been changed.
PASSWORD MODE
This feature is used to enable/disable password
by selecting “ON”/”OFF”.
PASSWORD
Enter your four digit password when a hint is
displayed on the screen.The default password is
1234.
1 Press 3 4 to highlight “PASSWORD”.
2 Enter its submenu by pressing 2.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Listening to preset radio stations
Radio Reception
Tuning to radio stations
●
In tuner mode, press PRESET+/- (or ¡ / ™on
the remote control) to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
1 Press STANDBY-ON B (B on the remote
control) to switch on the last selected source.
2 Press SOURCE (TUNER on the remote
control) to selectTUNER mode.
Setting the clock
3 Press and hold ¡ / ™ (1 / 2on the remote
control) until the frequency indication starts to
change, then release.
1 In Standby mode, press and hold CLOCK on
the remote until the time flashes on the display.
➜ ”CLOCK SET” is displayed briefly.Then, the
hour digits flash on the display screen.
➜ The system automatically tunes to the next
strong radio station.
●
To tune to a weak station, press ¡ / ™ (1 / 2
on the remote control) briefly and repeatedly
until an optimal reception is found.
2 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
4 Repeat Step 3 if necessary until you find the
3 Press CLOCK to confirm.
desired radio station.
➜ The minute digits flash on the display screen.
Presetting radio stations
4 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
You can preset up to 20 stations regardless of
the reception.
5 Press CLOCK again to confirm the clock
Automatic progamming
setting.
●
Press PROGRAM on the remote control for
more than two seconds to activate
programming.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
➜ All available stations are programmed.
Manual progamming
1 Tune to your desired radio station (refer to
“Tuning to radio stations”).
2 Press PROGRAM on the remote control.
➜ ”PROG” icon flashes.
3 Press PRESET+/- (or ¡ / ™on the remote) to
select the desired preset number.
➜ If “PROG” icon goes off before you select the
desired preset number, press PROGRAM on
the remote control.
4 Press PROGRAM on the remote again to
store the radio station.
●
Repeat steps 1-4 to store other radio stations.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Setting sleep/wake-up timer
5 Press SLEEP/TIMER to confirm the time
setting.
Sleep timer setting
➜ ”OFF” flashes on the display screen.
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
6 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL -/+ on the remote to select
“ON”.
1 In power-on mode, press SLEEP/TIMER on
the remote repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
➜
icon appears on the display screen.
To deactivate the timer
●
Select“OFF” at Step 6.
00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70
➜ 80 ➜ 90 ➜ 00
2 When you reach the desired length of time, stop
pressing SLEEP/TIMER.
➜
appears.
To deactivate the sleep timer
●
Press SLEEP/TIMER repeatedly until“00” is
displayed, or press STANDBY-ON B (B on
the remote).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1 Press and hold SLEEP/TIMER until the time
flashes on the display.
➜ ”TIMER SET” scrolls.Then, the hour digits
flash on the display screen.
2 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL -/+ on the remote to set the
hours.
3 Press SLEEP/TIMER to confirm.
➜ The minute digits flash on the display screen.
4 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL -/+ on the remote to set the
minutes.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SYSTEM
SPEAKER
Total output power.............................................. 400W
Power supply ........................................... 220V / 50 Hz
Rated working power consumption (1/8 rated
output power) ........................................................ ≤ 85W
AUX input sensitivity ..................................... ≤ 500mV
Channel Separation ............................................. ≥ 40dB
Distortion ....................................................................... 0.7%
Front Speakers
Impedance........................................................................ 4 Ω
Input power.................................................................. 75W
Sensitivity .............................................................. 80 4dB
Frequency response ................................ 80Hz-16kHz
Dimensions . 150 (W) x 323 (H) x 150 (D) mm
Weight ............................................................... 2.4 kg each
DVD
Subwoofer
Frequency response 100Hz-20kHz (+0.5/-2 dB)
Video output ................................................................1VP-P
HDMI 480p (60Hz), 720p (60Hz), 1080i (60Hz),
576p (50Hz), 720p (50Hz), 1080i (50Hz)
Horizontal definition................................... 500 (TV)
Dimensions ...............................................................................
....................... 232 (W) x 75.5 (H) x 223.5 (D) mm
Weight.......................................................................... 2.3 kg
Subwoofer (not magnetically shielded design).....
................................................................................................ 6.5”
Impedance........................................................................ 8 Ω
Input power................................................................150W
Dimensions (w x h x d) ....................................................
..................................... 430 mm x 262 mm x 292 mm
Weight............................................................................ 4.4 kg
REMOTE
AMPLIFIER
Distance...............................................................................6m
Angle ............................................................................... 300
Rated output power (THD = 10%) ..........................
........................................ 2x75W (4Ω) + 150W (8Ω)
Frequency response 100Hz-20kHz (+0.5/-2 dB)
S/N Ratio ................................................................... ≥ 60dB
Loaded impedance ..................................................... 4 Ω
Dimensions ...............................................................................
....................... 232 (W) x 75.5 (H) x 223.5 (D) mm
Weight....................................................................... 4.35 kg
Specifications subject to change without
prior notice
TUNER
FM Frequency range.......................... 87.5-108 MHz
FM Noise limit sensitivity .......................... ≤ 20µV/M
FM S/N........................................................................ ≥ 46dB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
Solution
No power.
✔
✔
Check if the AC power cord is properly
connected.
Press STANDBY-ON B on the top of the
DVD micro system or B on the remote to turn
on the power.
✔
✔
✔
Check if theTV is switched on.
Check the video connection.
Press SOURCE on the top of the DVD player
repeatedly to select“DVD” or press DISC on
the remote.
No picture.
✔
Set yourTV to the correctVideo In channel.This
channel is usually near channel 00. Or, you may
have a button on theTV remote control that
selects Auxiliary or A/V IN channel. See yourTV
owner’s manual for details. Or, change channels
at theTV until you see DVD screen on theTV.
If the progressive scan feature is activated but
the connectedTV does not support progressive
signals or the cables are not connected
accordingly, see “Getting started-Setting up
Progressive Scan feature” for proper progressive
scan setup or deactivate the progressive scan
feature as below:
✔
1)Turn off yourTV progressive scan mode or
turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit
the system menu and then DISC and “1” to exit
progressive scan.
Distorted or poor picture.
✔
✔
✔
Sometimes a small amount of picture distortion
may appear.This is not a malfunction.
Clean the disc.
Completely distorted picture or black/
white picture.
TV has a colour system standard. If the disc’s or
DVD system’s colour system is different than
yourTV’s colour system, the picture may be
distorted or colourless.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The aspect ratio of the screen cannot be
changed even though you have set theTV
shape.
✔
✔
The aspect ratio is fixed on the DVD disc.
Depending on theTV, it may not be possible to
change the aspect ratio.
No sound or distorted sound.
✔
✔
Adjust the volume.
Check that the speakers are connected
correctly.
✔
✔
✔
Replace the speaker cables.
Disconnect the headphones.
The system is in pause, slow motion or fast
forward/reverse mode, pressÉÅ to resume
normal play mode.
The micro DVD player does not start
playback.
✔
✔
Insert a readable disc with the playback side
facing down.
Check the disc type, colour system and regional
code. Check for any scratches or smudges on
the disc.
✔
✔
✔
Press SYSTEM MENU to turn off the setup
menu screen.
Cancel the parental control rating function or
change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
✔
Disconnect the power plug from the outlet and
insert again.
The DVD micro system does not
respond when the buttons are pressed.
✔
✔
✔
Multi-language sound or subtitle is not
recorded on the DVD.
Changing the language for the sound or subtitle
is prohibited on the DVD.
Cannot activate some features, such as
Angles, Subtitles, or multi-language
Audio.
The features may not be available on the disc.
Considerable noise in radio broadcasts.
✔
✔
✔
Tune in to the correct frequency.
Connect the antennas.
Fully extend the FM wire antenna. Position for
best reception and secure to a wall.
Connect an outdoor FM antenna.
Adjust the direction and position for best
reception.
✔
✔
✔
✔
Place the antenna farther away from any
equipment that may be causing the noise.
Increase the distance between the system and
yourTV or other equipment.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The remote control does not function.
✔
✔
Select the correct source (DISC orTUNER, for
example) before pressing the function button.
Point the remote control at the remote sensor
of the unit.
✔
✔
✔
✔
Reduce the distance to the player.
Remove any possible obstacles.
Replace the batteries with new ones.
Check that the batteries are loaded correctly.
The display is dark.
✔
✔
Press DIM again.
Low hum or buzz sound.
Place the DVD micro system as far away as
possible from electrical devices that may be
causing interference.
✔
✔
Check all speakers for correct polarity.
Low bass response.
Unable to select Progressive Scan.
Check that the output of the video signal is
switched to 'Pr/Cr Pb/CbY'.
✔
✔
✔
Check the connection between theTV and the
HDMI jack of the DVD player.
See if theTV supports this 480p/576p/720p/
1080i DVD player.
No sound is output from the HDMI jack.
Check yourTV system setup correctly.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing without data
compression.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for
reproduction control. By using screen menus
recorded on aVideo CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
Progressive Scan (P-Scan): It displays all the
horizontal lines of a picture at one time, as a
signal frame. This system can convert interlaced
video from DVD into progressive format for
connection to a progressive display. It
dramatically increases the vertical resolution. A
progressive scanTV set is needed to receive
progressive scan output from the system.
Region code: A system allowing discs to be
played only in preset regions.This unit will only
play discs that have compatible region codes.You
can find the region code of your unit from the
product label. Some discs are compatible with
more than one region (or ALL regions).
S-Video: Produces a clear picture by sending
separate signals for luminance and the color.You
can use S-Video only if yourTV set has S-Video
In jack.
Sampling Frequency: Frequency of data
sampling when analog data is converted to
digital data. Sampling frequency numerically
represents how many times the original analog
signal is sampled per second.
Surround: A system for users to create
realistic three-dimensional sound fields full of
realism by arranging multiple speakers around
the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate
the title you want.
Analog: Sound that has not been turned into
numbers.Analog sound varies, while digital sound
has specific numerical values.These jacks send
audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventionalTVs. is
4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV set, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
second, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate the
better the sound quality. However, higher bit
rates use more space on a Disc.
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles.A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
ComponentVideo Out Jacks: Jacks on the
back of the DVD System that send high-quality
video to aTV set that has ComponentVideo In
jacks (R/G/B, Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for the
selection of images, sound, subtitles, multi-angles,
etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL
or OPTICAL jacks.These jacks send audio
through multiple channels, instead of just two
channels as analog does.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up
to six channels of digital audio (front left and
right, surround left and right and center).
JPEG: A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
compression system,“MPE”is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3.Through the MP3 format, one
CD-R or CD-RW can contain about 10 times as
much data volume as a regular CD can.
Multichannel: DVD is specified to have all
sound tracks constitute one sound field.
Multichannel refers to a structure of sound
tracks having three or more channels.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video toTV.
HDMI: High Definition Multimedia Interface. A
specification developed by the HDMI Working
Group that combines multi-channel audio and
high definition video and that controls signals
into a single digital interface for use with DVD
players, digital television, and other audiovisual
devices.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa;Nyanja7889
9072
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9065
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Disc Operations
Features .................................................................. 7
Supplied accessories ............................................ 7
Environment information ................................... 7
Installation .............................................................. 8
Maintenance .......................................................... 8
Playable Discs ...................................................... 23
Region Codes...................................................... 23
Playing discs ......................................................... 23
Using the Disc Menu ......................................... 24
Basic playback controls .............................. 24~26
Pausing playback
Selecting a track/chapter/title
Resuming playback from the last stopped point
Zoom
Repeat
RepeatA-B
Slow Motion
Program
Forward/Reverse Searching
Time search & search by chapter/track number
Information display during playback
Special disc features ........................................... 26
Playing a Title
Connections
Step 1: Placing the speakers and subwoofer
.................................................................................. 9
Step 2:Connecting speakers............................ 10
Step 3:Connecting the control cable ............ 10
Step 4:ConnectingTV ................................ 10~12
Step 5: Connecting FM antenna ...................... 13
Step 6:Connecting the power cord............... 13
Additional: Connecting additional equipment ...
......................................................................... 13~14
Camera Angle
Changing the Audio Language
Changing the Audio Channel
Subtitles
Playing MP3/WMA/JPEG Picture disc ............ 26
Playing MP3/WMA disc ..................................... 26
General operation
Functional Overview
DVD player and power amplifier .................... 15
Remote control ........................................... 16~17
Playback selection
Playing JPEG Picture CD................................... 27
General operation
Playback selection
Special JPEG features ......................................... 27
Preview function
Zoom picture
Getting Started
Step 1:Inserting batteries into the Remote
Control ................................................................. 18
Using the Remote Control to operate the Player
Step 2:Setting up theTV ........................... 18~19
Selecting the colour system that corresponds to
yourTV
Playback with multi-angles
Playing a DivX disc ............................................. 28
Setting up Progressive Scan feature
To deactivate Progressive manually
Step 3:Setting language preference ................ 20
Setting the OSD Language
Setting theAudio, Subtitle and Disc Menu language
Basic Functions
Switching the system on/off ............................. 21
Switching the system to Eco Power Standby
mode ..................................................................... 21
Power-saving automatic standby ..................... 21
Volume control ................................................... 21
Sound control .............................................. 21~22
DBB (Dynamic Bass Boost)
DSC (Digital Sound Control)
LOUDNESS
DVS
Dimming the display screen ............................. 22
Demonstration mode........................................ 22
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
System Menu Options
Basic Operations ................................................ 29
GENERAL SETUP PAGE ........................... 29~30
TV DISPLAY
OSD LANGUAGE
SCREEN SAVER
DIVX CODE
AUDIO SETUP PAGE ................................ 30~31
ANALOGAUDIO SETUP
SPDIF SETUP
DOLBY DIGITAL SETUP
3D PROCESSING
HDCD
NIGHT MODE
VIDEO SETUP PAGE ................................. 31~32
COMPONENT
TV MODE
PICTURE SETTING
HDMI SETUP
PREFERENCE PAGE.......................................... 33
PARENTAL
DEFAULT
PASSWORD SETUP PAGE ............................. 34
PASSWORD MODE
PASSWORD
Other Functions
Radio reception .................................................. 35
Tuning to radio stations
Presetting radio stations
Listening to preset radio stations
Setting the clock ................................................. 35
Setting sleep/wake-up timer ............................ 36
Sleep timer setting
Wake-up timer setting
Specifications ........................................... 37
Troubleshooting ............................. 38~40
Glossary......................................................... 41
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Note:
Congratulations on your purchase and welcome
to Philips!
– To fully enjoy the progressive scan feature, you
need a progressive scanTV.
To fully benefit from the support that Philips
welcome.
Supplied accessories
– Remote control with two AAA batteries
– FM wire antenna
– Composite video cable (yellow)
– Control cable
– Power cord
– 2 front speakers including 2 speaker
cables
– 1 passive subwoofer including 1 subwoofer
cable
Features
Your DVD MicroTheatre with 2.1 channel full
digital amplifier creates the same dynamic sound
qualities that you find in full-fledged cinemas and
incorporates some of the best features in home
theater technology.
– This instruction booklet and a Quick Start
Guide
Other features include:
Built-in Dolby Digital decoder, supporting DSC
sound setting.
If any item is damaged or missing, contact
your retailer or Philips.
Additional Component Connections
Lets you connect other audio and audio/visual
components to the DVD micro theatre.
Environmental information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Night mode
Lets you compress the dynamic range, reducing
the difference in loudness between different
sounds in Dolby Digital mode.
Parental Control (Rating Level)
Lets you set a ratings level so that your children
cannot watch a DVD that has a rating higher
than you set.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Sleep/Wake-upTimer
Enables the system to switch on/off automatically
at a preset time.
Progressive Scan
Provides high quality flicker-free images for film
based sources.When a picture refreshes, its
vertical resolution can double to 525 lines.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Installation
●
●
Place the player on a flat, hard, and stable surface.
In a cabinet, allow about 10cm (4 inches) of free
space all around the player for adequate
ventilation.
●
●
●
●
●
●
Do not expose your player to extreme
temperatures or humidity.
The apparatus shall not be exposed to dripping
or splashing.
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
No naked flame sources, such as lighted candles,
shall be placed on the apparatus.
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newpapers, table-cloths, curtains, et.
Maintenance
●
●
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out, in a straight line.
Do not expose the player,
batteries or discs to humidity,
rain, sand or excessive heat
(caused by heating equipment or direct sunlight).
Always keep the disc tray closed to avoid dust
on the lens.
●
●
Do not use solvents such as benzene, thinner,
commercially available cleaners, or anti-static
spray intended for colour discs.
The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
AC Power
FM
antenna
Speaker
(right)
Speaker
(left)
Subwoofer
Step 1: Placing the speakers and
subwoofer
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
Front
speaker
( left )
Front
speaker
( right )
connections with the power switched on.
VIEWING AREA
1 Place the front left and right speakers at equal
distances from theTV set and at an angle of
approximately 45 degrees from the listening
position.
2 Place the subwoofer on the floor near theTV.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to yourTV set.
– Allow adequate ventilation around the DVD
System.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 2: Connecting speakers
Step 3: Connecting the control
cable
1 Connect the speaker wires to the SPEAKERS
terminals, right speaker to FRONT (4Ω) R and
left speaker to FRONT (4Ω) L. Fully insert the
connectors on the cables into the terminals and
fasten the hooks to ensure firm connection.
●
Connect the serial port marked “CONTROL
CABLE” at the rear of the DVD player to the
same port at the rear of the power amplifier
with the supplied flat control cable.
Step 4: ConnectingTV
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of yourTV.
– Connect the DVD system directly to
theTV.
2 Connect the passive subwoofer to the
SUBWOOFER (8Ω) terminal with the
supplied subwoofer cable by matching the plug
types.
Using CompositeVideo jack
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker jacks.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
1 Use the composite video cable (yellow) to
connect the system's VIDEO jack to the video
input jack (or labelled as A/V In,Video In,
Composite or Baseband) on theTV set.
2 To listen to theTV channels through this DVD
system, use the audio cables (white/red-not
supplied) to connect AUX IN L/R jacks to the
corresponding AUDIO OUT jacks on theTV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Using ComponentVideo jacks (Y Pb Pr)
Using S-Video jack
IMPORTANT!
IMPORTANT!
– The progressive scan video quality is
only possible when usingY Pb Pr, and a
progressive scanTV is required.
– If S-Video is used for DVD playback
connection, the system’sVIDEO OUT
setting will need to be changed
accordingly.
1 Use component video cables (red/blue/green -
not supplied) to connect the DVD system's
COMPONENT (Pr/Cr Pb/CbY) jacks to
the corresponding Component video input jacks
(or labeled asY Pb/Cb Pr/Cr orYUV) on theTV.
1 Use an S-Video cable (not supplied) to connect
the DVD system’s S-VIDEO jack to the S-
Video input jack (or labeled asY/C or S-VHS) on
theTV.
2 To listen to theTV channels through this DVD
system, use the audio cables (white/red-not
supplied) to connect AUX IN L/R jacks to the
corresponding AUDIO OUT jacks on theTV.
2 To listen to theTV channels through this DVD
system, use the audio cables (white/red-not
supplied) to connect AUX IN L/R jacks to the
corresponding AUDIO OUT jacks on theTV.
3 If you are using a Progressive ScanTV (TV must
indicate Progressive Scan or ProScan capability),
to activateTV Progressive Scan, please refer to
yourTV user manual. For DVD system
Progressive Scan function, see “Getting Started-
Setting up Progressive Scan feature”.
Note:
– If yourTV does not support Progressive Scan, you
will not be able to view the picture.
Press SYSTEM MENU on the remote to exit the
system menu and then DISC and “1” to exit
progressive scan.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Using an accessory RF modulator
Step 5: Connecting FM antenna
1 Connect the supplied FM antenna to the FM (75
Ω) jack. Extend the FM antenna and fix its end to
the wall.
IMPORTANT!
– If yourTV only has a single Antenna In
jack (labeled as 75 ohm or RF In), you
will need an RF modulator in order to
view DVD playback on theTV. See your
electronics retailer or contact Philips for
details on RF modulator availability and
operations.
For better FM stereo reception, connect an
external FM antenna (not supplied).
Note:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
yourTV,VCR or other radiation source to prevent
unwanted interference.
1 Use the composite video cable (yellow) to
connect the DVD system’s VIDEO jack to the
video input jack on the RF modulator.
2 Use an RF coaxial cable (not supplied) to
connect ANTENNA OUT orTOTV jack on the
RF modulator to the Antenna IN jack on theTV.
3 Connect the Antenna or CableTV service signal
to the ANTENNA IN or RF IN jack on the RF
modulator. (It may have been connected to your
TV previously. Disconnect it from theTV.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 6: Connecting the power
cord
Viewing and listening to the playback of
other equipment A
●
Connect the system's AUX IN L/R jacks to the
AUDIO OUT jacks on the other audio/visual
device (such as aTV,VCR, Laser Disc player or
cassette deck).
Before starting operation, press SOURCE on
the front panel to select AUX or press AUX on
the remote in order to activate the input source.
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
Additional: Connecting
additional equipment
Using theVCR for recording DVDs B
●
Connect one of the system's VIDEO jack to the
correspondingVIDEO IN jack and AUDIO
OUT L/R jacks to the AUDIO IN jacks on the
VCR.This will allow you to make analogue stereo
(two channel, right and left) recordings.
IMPORTANT!
– Some discs are copy-protected.You
cannot record the disc through aVCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner’s manual of
the other equipment for complete
connection and usage details.
Recording (digital) C
●
Connect the system's COAXIAL or
OPTICAL jack to the DIGITAL IN jack on a
digital recording device.
Before starting operation, set the DIGITAL OUT
according to the audio connection. (See
"DIGITAL OUT".)
Connecting an active subwoofer D
●
Connect the DVD micro system's
SUBWOOFER jack to the AUDIO INPUT
jack on an active subwoofer (not supplied).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to aTV with HDMI Jack E
HDMI connects untouched and uncompressed
digital transmission for the highest and crispest
sound/image quality.
It has plug and play capability using only one
cable for both audio/video output.
●
Use a HDMI cable (not supplied) to connect the
HDMI jack on the DVD Player to HDMI IN
on a HDMI compatible device (e.g.;TV, Projector,
Adaptor).
➜ It may take a while for the DVD player and
input device to communicate and initialise.
➜ Playback starts automatically.
E
HDTV
HDIN
HDMI IN
Notes:
– Proceed to "Setup Menu Options" ➜ "VIDEO
SETUP PAGE" ➜ "HDMI SETUP" for detailed
HDMI setup.
– If you are using the HDMI as audio source
make sure that "DIGITAL OUTPUT" is set to "PCM
only" (see "Setup Menu Options" ➜ "AUDIO
SETUP PAGE" ➜ "DIGITAL AUDIO SETUP").
– To stop sound output from yourTV after making
the HDMI connection, make sure that "DIGITAL
OUTPUT" is set to "SPDIF OFF" (see "Setup Menu
Options" ➜ "AUDIO SETUP PAGE" ➜ "DIGITAL
AUDIO SETUP").
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
1
2
734 7
8 5 6
!
9
0
7 ¡/™
DVD player and power amplifier
Disc:
1 STANDBY-ON B
–
skips to the previous/next chapter/title/track.
–
switches the system on or to standby mode.
Tuner:
2 Display
–
–
tunes to a higher/lower radio frequency.
press and hold, then release the key to
start automatic search for a radio frequency
downward/upward.
–
shows the current status of the DVD player.
3 ÉÅ
–
starts or interrupts disc playback.
4 PRESET +
8 OPEN•CLOSE ç
–
in tuner mode, selects a preset radio station
forward.
–
–
opens or closes the disc tray.
switches the system on.
5 PRESET-/9
9 SOURCE
–
–
stops disc playback or erases a program.
in tuner mode, selects a preset radio station
backward.
–
selects the respective sound source: DVD/AUX/
TUNER.
–
switches the system on.
–
in Demo mode (on the system only), activates/
deactivates the demonstration.
0 IR SENSOR
point the remote control towards this sensor.
–
6 MOVING SPEAKERS
! VOLUME -/+
–
enables/disables the surround sound effect with
moving speakers.
–
–
adjusts the volume upward/downward.
adjusts the hours and minutes in clock/timer
setting mode.
–
switches the set timer ON or OFF.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
4 DISPLAY
displays information onTV screen during
playback
Remote control
–
1 B
–
switches the system on or to standby mode.
5 MODE
selects various repeat modes or the shuffle play
mode for a disc.
6 A-B
–
2 0
–
opens or closes the disc compartment
3 DISC/TUNER/AUX
–
–
repeats playback of a specific section on a disc.
selects the respective sound source for DVD/
AUX/TUNER.
exits P-SCAN (progressive scan). (Only for
DISC)
7 DIM
–
–
selects different levels of brightness for the
display screen.
8 SLOW
selects different slow playback modes for a
DivX/VCD/SVCD/DVD.
–
9 SYSTEM MENU (disc mode only)
enters or exits the system menu.
1
3
2
4
–
0 DISC MENU (disc mode only)
–
–
–
DVD/VCD: enters or exits the disc contents
menu.
VCD2.0: switches the playback control mode on
or off .
5
6
9
8
7
0
@
MP3/WMA: switches between Album and Filelist.
!
#
$
! 4 / 3 / 2 / 1
–
–
–
selects an item in a menu.
⁄
º
moves an enlarged picture up/down/left/right.
(2/ 1;Tuner) tunes to a higher/lower radio
frequency.
(2/ 1;Tuner) press and hold, then release the
key to start automatic search for a radio
frequency downward/upward.
•
–
–
ª
%
^
§
∞
(2/ 1; Disc) searches backward/forward in a
disc at different speeds.
&
≥
≤
@ OK
confirms a selection.
*
–
£
™
¡
)
(
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
∞ CLOCK
Standby mode
# ZOOM
DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on theTV screen.
–
–
sets the system clock.
$ ¡ / ™
Playback mode
–
Disc: skips to the previous/next chapter/title/
–
displays the system clock.
track
§ DBB
to select the desired DBB level (DBB ON or
DBB OFF).
–
Tuner: selects a preset radio station.
–
% ÉÅ
–
starts or interrupts disc playback.
≥ DSC
selects different types of preset sound equalizer
^ 9
–
–
stops disc playback or erases a program.
settings (FLAT, POPS, JAZZ, CLASSIC or
ROCK).
& LOUDNESS
–
enables or disables automatic loudness
adjustment.
• VOL +/-
–
–
adjusts the volume upward/downward.
adjusts the hours and minutes in clock/timer
setting mode.
* Numeric Keypad (0-9)
inputs a track/title/chapter number of the disc.
–
–
switches the set timer ON or OFF.
( PROGRAM
ª MUTE
–
–
DVD/VCD/CD: enters the program menu.
MP3/WMA-CD: adds/deletes a programmed
track to/from the program list.
–
disables or enables sound output.
º MOVING SPEAKERS
–
Tuner: programs preset radio stations.
–
enables/disables the surround sound effect with
moving speakers.
) GOTO/STEREO
–
Disc: fast searches in a disc by entering a time,
title, chapter or track.
⁄ RDS (unavailable for this version)
–
for tuner, displays RDS information.
–
FM: sets stereo or mono sound mode.
¡ ANGLE
–
selects a DVD camera angle.
™ AUDIO
forVCD/DivX
–
–
sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
selects an audio language.
£ SUBTITLE
selects a subtitle language.
Notes for remote control:
–
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or
TUNER, for example).
≤ SLEEP/TIMER
Standby mode
–
–
sets time for switching on the system
automatically.
– Then select the desired function ( 2;, í,
ë for example).
Power-on mode
sets the sleep timer function (auto off).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
2 Turn on theTV and set to the correct video-in
channel.You should see the blue Philips DVD
background screen on theTV.
Step 1: Inserting batteries into
the Remote Control
➜ Usually these channels are between the
lowest and highest channels and may be called
FRONT,A/V IN, orVIDEO. See yourTV manual
for more details.
➜ Or, you may go to channel 1 on yourTV, then
press the Channel down button repeatedly until
you see theVideo In channel.
3
1
2
➜ Or, theTV Remote Control may have a
button or switch that chooses different video
modes.
➜ Or, set theTV to channel 3 or 4 if you are
using an RF modulator.
1 Open the battery compartment.
2 Insert two AAA batteries following the
indications (+/-) inside the compartment.
3 Close the cover.
Using the Remote Control to operate
the Player
Selecting the colour system that
corresponds to yourTV
1 Aim the Remote Control
directly at the remote sensor
(IR) on the front panel.
This DVD Player is compatible with both NTSC
and PAL. In order for a DVD disc to play on this
Player, the colour system of the Disc, theTV and
the DVD Player should match.
2 Do not put any objects
between the Remote Control
and the DVD Player while
operating the DVD Player.
1 Press SYSTEM MENU in full stop mode.
2 Press 1 2 to select “PREFERENCE PAGE”.
3 Use 1 2 3 4 on the remote to navigate in
the menu.
CAUTION!
– Remove batteries if
Move to “TVTYPE” and press 2.
they are exhausted or if the Remote
Control is not being used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
➜ PAL: Select this if the connectedTV is PAL
system. It will change the video signal of a NTSC
disc and output in PAL format.
➜ Auto: Select this if the connectedTV is
compatible with both NTSC and PAL (multi-
system).The output format will be in accordance
with the video signal of the disc.
➜ NTSC: Select this if the connectedTV is
NTSC system. It will change the video signal of a
PAL disc and output in NTSC format.
Step 2: Setting up theTV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See
“ConnectingTV”).
4 Select an item and press OK.
Notes:
1 Switch the DVD system on and then select DISC
– This option is available only when the "HDMI" is
set to "OFF".
source. (See “Switching the system on/off”).
– Before changing the currentTVType setting,
ensure that yourTV supports the selectedTVType.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting up Progressive Scan feature (for
Progressive ScanTV only)
9 Turn on yourTV progressive scan mode (refer to
yourTV user manual).
➜ The below menu appears on theTV.
The progressive scan display twice the number
of frames per seconds than interlaced scanning
(ordinary normalTV system).With nearly double
the number of lines, progressive scan offers
higher picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1)YourTV can accept progressive signals, a
progressive scanTV is required.
2)You have connected the DVD player to your
TV usingY Pb Pr (see “Connections-Step 4:
ConnectingTV- Using ComponentVideo jacks”.)
0 Press 1 2to highlight “OK” in the menu and
press OK to confirm.
➜ The setup is complete now and you can start
enjoy the high quality picture.
1 Turn on yourTV.
To deactivate Progressive manually
2 Turn off yourTV progressive scan mode or turn
on interlaced mode (refer to yourTV user
manual).
●
When the distorted sign still appears on
theTV, it may be due to the connectedTV
does not accept progressive signals, and
progressive is set by mistake.You must reset the
unit to interlace format.
3 Press STANDBY-ON B (B on the remote)
to turn on the DVD player.
4 Select the correctVideo Input channel.
➜ The DVD background screen appears on the
TV.
1 Turn off yourTV progressive scan mode or turn
on to interlaced mode (refer to yourTV user
manual).
5 Press SYSTEM MENU.
2 Press SYSTEM MENU on the remote control
to exit the system menu and then DISC and “1”
to exit progressive scan.
6 Press 1 2 repeatedly to select "VIDEO SETUP
PAGE”.
➜ The DVD blue background screen will appear
on theTV.
7 Select "TV MODE" to "P-SCAN", then OK to
confirm.
➜ The instruction menu appears on theTV.
Note:
– During normal playback in the progressive scan
mode, pressing DISC button and “1” will exit the
progressive scan mode.
8 Press 1 2 to highlight “OK” in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on yourTV.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting the Audio, Subtitle and Disc
Menu language
Step 3: Setting language
preference
You can select your own preferred language
settings.This DVD system will automatically
switch to the selected language whenever you
load a disc. If the language selected is not
available on the disc, the disc’s default language
will be used instead.The OSD language in the
system menu will remain once selected.
Setting the OSD Language
1 Press SYSTEM MENU in stop mode.
2 Press 1 2to select“PREFERENCE PAGE”.
3 Press 3 4to highlight the following in the
Preference Page.
– “AUDIO” (disc’s soundtrack)
– “SUBTITLE” (disc’s subtitles)
– “DISC MENU” (disc’s menu)
4 Enter its submenu by pressing 2.
5 Select a language and press OK.
1 Press SYSTEM MENU.
6 Repeat steps 3~5 for other language settings.
2 Press 1 2 to select“GENERAL SETUP PAGE”.
3 Use 1 2 3 4on the remote to navigate in the
To exit from the menu
menu.
●
Press SYSTEM MENU again.
Move to “OSD LANGUAGE” and press 2.
4 Select a language and press OK.
To exit from the menu
●
Press SYSTEM MENU again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
DSC (Digital Sound Control)
Switching the system on/off
DSC provides a different type of preset sound
equalizer setting.
● Press STANDBY-ONB (B on the remote).
➜ “HELLO” is displayed briefly.The system will
switch to the last selected source.
●
Press DSC on the system or remote control
repeatedly to select: FLAT, POPS, JAZZ, CLASSIC
or ROCK.
● Press DISC, TUNER or AUX on the remote.
➜ The system will switch to the selected source.
LOUDNESS
To switch the system to standby mode
● Press STANDBY-ONB (Bon the remote).
➜ “BYE BYE” is displayed briefly.The interactive
sound settings, last selected source and tuner
presets will be retained in the player’s memory.
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press LOUDNESS on the remote control to
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
enable or disable LOUDNESS feature.
➜
icon appears/disappears after this feature
is enabled/disabled.
DVS
DVS (DolbyVirtual Speaker) technology creates
a highly compelling 5.1-channel listening
experience from as few as two speakers, making
it an ideal entertainment solution for locations
where space for multiple speaker setup is limited.
DVS feature enables you to switch between the
surround sound mode and ordinary music
mode.
Volume control
Turn VOLUME (-/+) clockwise or anticlockwise
(or press VOL +/- on the remote) to increase
or decrease the volume level.
➜ ”VOL XX” is displayed on the display panel.
“XX” denotes the volume level.
To switch off the volume temporarily
Surround mode
Music mode
●
●
Press MUTE on the remote.
➜ Playback will continue without sound and
“MUTING” flashes.
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
●
Press MOVING SPEAKES to switch between
the surround sound mode and ordinary music
mode.
Sound control
DBB, DSC, LOUDNESS and DVS sound
features cannot be activated at the same
time.
➜ When the surround sound mode is enabled,
a “DVS” icon will appear on the display panel and
the top parts of the left and right front speakers
will swivel sideways to achieve the moving
surround effect.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
➜ When the surround sound mode is disabled,
the “DVS” icon will disappear from the display
panel and the top parts of the left and right front
speakers will return to their previous positions
to resume the ordinary music mode.
●
Press DBB on the remote repeatedly to select
DBB ON or DBB OFF.
➜ Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Note:
– See “System Menu Options-AUDIO SETUP
PAGE-ANALOG AUDIO SETUP” for more DVS
setup options.
Dimming the display screen
●
Press DIM repeatedly to select different levels of
brightness for the display screen.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
In standby mode, press PRESET–/9 on the
system to activate the demo mode.
➜ Demonstration will begin.
●
●
To deactivate the demonstration
Press PRESET–/9 on the system again.
➜ “DEMO OFF” is displayed.
Note:
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
MCD728
CLASS 1
LASER PRODUCT
Printed in China
PDCC-JS-JW-0731
Download from Www.Somanuals.com. All Manuals Search And Download.
|