Philips DVD Player DVD702AT User Manual

Digital Video Disc Player  
O wners Manual  
DVD702  
Read this manual first!  
Congratulations on purchasing this Philips product.  
Weve included everything you need to get started.  
If you have any problems, Philips Representatives can  
help you get the most from your new product by explaining:  
• Hookups,  
FirstTime Setup, and  
Feature Operation.  
Do not attempt to return this product to the store.  
For fast help, call us first!  
1-866-323-9916  
Thank you for making Philips a part of your home!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
LASER SAFETY  
This unit employs a laser. Due to possible eye injury, only  
a qualified service person should remove the cover or  
attempt to service this device.  
USE O F CO N TRO LS O R ADJUSTMEN TS O R  
PERFO RMAN CE O F PRO CEDURES OTH ER  
TH AN TH O SE SPECIFIED H EREIN MAY  
RESULT IN H AZARDO US RADIATIO N  
EXPO SURE.  
1
The region code for this set is 1.  
Since it is usual for DVD movies to be released at  
different times in different regions of the world, all  
players have region codes and discs can have an optional  
region code. If you load a disc of a different region code  
to your player, you will see the region code notice on  
the screen.The disc will not play and should be  
unloaded.  
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Output Power  
10 mW (VCD/CD)  
60 degree  
Beam divergence  
N OTE:  
PICTURES SH OW N MAY BE DIFFEREN T  
BETW EEN CO UN TRIES.  
Manufactured under license from Dolby Laboratories.  
“Dolby,” Pro Logic,and the double-D symbol are  
trademarks of Dolby Laboratories. Confidential Unpublished  
Works. Copyright 1992-1997 Dolby Laboratories, Inc. All  
rights reserved.  
N EVER MAKE O R CH AN GE CO N N ECTIO N S  
W ITH TH E POW ER SW ITCH ED O N .  
CAUTIO N  
VISIBLE AN D IN VISIBLE LASER RADIATIO N  
W H EN O PEN AVO ID EXPO SURE TO BEAM  
(W ARN IN G LO CATIO N : IN SIDE O N LASER  
COVERSH IELD O R TH E BACKPLATE O F SET)  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
“DTS” and “DTS Digital Out” are trademarks of Digital  
Theater Systems, Inc.  
For Customer Use:  
Read carefully the information located at the back of your DVD Video Player and enter below the Serial Number. Retain  
this information for future reference.  
Model No. DVD VIDEO 702  
Serial No. __________________________  
3
IN DEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Inform ation  
WARNING  
To reduce the risk of fire or electric shock, do not expose  
this appliance to rain or moisture.  
CAUTION  
RIS K OF ELECTRIC S HOCK  
DO NOT OPEN  
CAUTIO N  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol warns the user that uninsulated voltage  
within the unit may have sufficient magnitude to cause  
electric shock. Therefore, it is dangerous to make  
any kind of contact with any inside part of this unit.  
The set complies with the FCC-Rules, Part 15 and with 21  
CFR 1040.10.  
This symbol alerts the user that important literature  
concerning the operation and maintenance of this  
unit has been included. Therefore, it should be read  
carefully in order to avoid any problems.  
Canada  
This digital apparatus does not exceed the Class B limits for  
radio noise emissions from digital apparatus as set out in  
the Radio Interference Regulations of the Canadian  
Department of Communications.  
AVISO  
AVIS  
RISQUE DE CHOCS ÉLECTRIQUES  
NE PAS OUVRIR  
Para reducir el riesgo de fuego o choque eléctrico, no  
exponga el aparato a la lluvia o humedad.  
Attention: Afin de prévenir le risque de chocs électriques,  
ne pas retirer les vis.  
Toute réparation devrait être confiée à un personnel qualifié.  
ATENCIÓ N  
El uso de mando o ajustes o la ejecucción de métodos que  
no sean los aquí descritos puede ocasionar peligro de  
exposición a radiación.  
Ce symbole indique la présence dune tension  
suffisamment élevée pour engendrer un risque de  
chocs électriques.  
Ce symbole indique que le manuel dinstallation  
fourni avec lappareil contient dimportantes  
recommandations quant au fonctionnement et  
à l’entretien de ce dernier.  
El aparato cumple las normas FCC, Parte 15 y 21 CFR  
1040.10.  
AVIS  
Afin de réduire tout risque dincendie ou de choc  
électrique, il ne faut pas exposer cet appareil à la pluie ou à  
l’humidité.  
AVIS O  
RIESGO DE CHOQUE ELÉCTRICO  
NO ABRIR  
ATTENTIO N  
Atención: Para reducir el riesgo de choque elécrico,  
no quite la tapa (o el panel posterior).  
En su interior no hay piezas que el usuario pueda reparar.  
Para servicio dirijase a personal calificado.  
L'utilisation des commandes ou réglages ou le non-respect  
des procédures ci-incluses peuvent se traduire par une  
exposition dangereuse à l'irradiation.  
Este símbolo tiene por finalidad advertir al usuario de  
la presencia de tensión peligrosa no aislada dentro de  
la caja del aparato, que puede ser lo suficientemente  
fuerte para constituir un peligro de choque eléctrico.  
L'appareil répond aux normes FCC, Part 15 et 21 CFR  
1040.10.  
Este símbolo sirve para advertir al usuario de la  
presencia de instrucciones de manejo y  
mantenimiento (servicio) importantes en el manual  
que acompaña al aparato.  
Canada  
Cet appareil numérique n'emet pas de bruits  
radioélectriques dépassant les limites applicables aux  
appareils numériques de Class B prescrites dans le  
Règlement sur le Brouillage Radioélectrique édicté par le  
Ministère des Communications du Canada.  
4
GEN ERAL IN FO RMAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipm ent  
This product was designed and manufactured to meet strict  
quality and safety standards.There are, however, some  
installation and operation precautions which you should be  
particularly aware of.  
9. Do not defeat the safety  
purpose of the polarized or  
grounding-type plug.A polarized plug  
has two blades with one wider than  
AC Polarized  
Plug  
the other.A grounding type plug has two blades and a third  
grounding prong.The wide blade or the third prong are  
provided for your safety.When the provided plug does not  
t into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
1. Read these instructions All the safety and operating  
instructions should be read before the appliance is  
operated.  
2. Keep these instructions The safety and operating  
instructions should be retained for future reference.  
10.Protect the power cord from being walked on or  
pinched, particularly at plugs, convenience receptacles, and  
the point where they exit from the appar atus.  
3. Heed all warnings All warnings on the appliance and in  
the operating instructions should be adhered to.  
4. Follow all instructions All operating and use  
11.O nly use attachm ents/accessories specied by the  
instructions should be followed.  
manufacturer.  
5. Do not use this apparatus near water for example,  
near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet  
basement, near a swimming pool, etc.  
12.  
Use only with a cart, stand, tripod, bracket,  
or table specied by the manufacturer or sold  
with the apparatus.When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
6. Clean only with a dam p cloth. The appliance should  
be cleaned only as recommended by the manufacturer.  
13.Unplug this apparatus during lightning storms or when  
7. Install in accordance with the m anufacturer's  
instructions. Do not block any of the ventilation  
openings. For example, the appliance should not be  
situated on a bed, sofa, rug, or similar surface or placed in a  
built-in installation, such as a bookcase or cabinet that may  
impede the ow of air through the ventilation openings.  
unused for long periods of time.  
14.Refer all servicing to qualied service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as if the power-supply cord or plug  
is damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or  
moisture, or if the unit does not operate normally or has  
been dropped.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including ampliers) that produce heat.  
15. Battery usage CAUTION To prevent battery leakage  
that may result in bodily injury or damage to the unit:  
G
G
Install all batteries correctly, + and - as marked on the unit.  
Do not mix batteries (old and new or carbon and  
alkaline, etc.).  
G
Remove batteries when the unit is not used for a long time.  
EL 6475-E001: 00/8  
5
IMP O RTAN T SAFET Y IN ST RU C T IO N S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Int roduct ion  
Philips DVD Video Introduction ------------------------- 7  
Unpacking ---------------------------------------------------- 7  
Remote Control Battery Installation ------------------- 7  
Safety Information ------------------------------------------ 7  
Cleaning Discs ---------------------------------------------- 7  
Funct ional O ver view  
Front Panel and Display ----------------------------------- 8  
Remote Control -------------------------------------------- 9  
Rear Panel --------------------------------------------------10  
Prepar at ion  
General Notes ---------------------------------------------11  
Connecting to a TV ---------------------------------------11  
Connecting to Optional Equipment --------------------12  
General Explanation --------------------------------------13  
On-Screen Display ----------------------------------------13  
Temporary Feedback Field Icons -----------------------13  
Personal Preferences----------------------------------13-15  
O per at ion  
Loading Discs-----------------------------------------------16  
Playing DVD andVideo CD discs -----------------------16  
General Features --------------------------------------16-18  
Special DVD Features-------------------------------------18  
SpecialVCD Features -------------------------------------19  
Playing an Audio CD --------------------------------------19  
Program -----------------------------------------------------20  
Playing MP3 Recordings ------------------------------20-21  
Before Request ing Ser vice  
Before Requesting Service -------------------------------22  
Specificat ions  
Specifications -----------------------------------------------23  
Lim it ed W ar r ant y  
Limited Warranty --------------------------------------24-25  
6
CO N T EN T S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Philips DVD Video Int roduct ion  
Unpacking  
Your Philips DVD Video Player will play digital video discs  
conforming to the universal DVD Video standard.With it,  
you will be able to enjoy full-length movies with true  
cinema picture quality, as well as stereo or multi-channel  
sound (depending on the disc and your playback setup).  
The unique features of DVD Video, such as selection of  
sound track, subtitle languages and different camera angles  
(again, depending on the disc), are all included.  
First check and identify the contents of your DVD Players  
package.You should have the following items:  
DVD Player  
Remote Control with batteries  
Audio cable  
Video cable  
Instructions for use  
If any item is damaged or missing, contact your retailer or  
Philips.  
Keep the packaging material for future transportation.  
In addition to DVD Video discs, you will be able to play all  
Video CDs and Audio CDs (including finalized CD  
Recordable (CD-R) and CD Rewritable (CD-RW)).  
DVD Video  
Rem ot e Cont rol Bat t er y  
Inst allat ion  
You will recognize DVD Video discs by the logo shown.  
Depending on the material on the disc (a movie, video clips,  
a drama series, etc.), the disc may have one or more Titles.  
Insert batteries as indicated inside the battery compartment.  
DVD-VIDEO DISC  
Caution: Do not m ix old and new batteries. Never  
m ix different types of batteries (standard, alkaline,  
etc.).  
TITLE 1  
TITLE 2  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
Video CD  
You will recognize Video CDs by this logo.  
Audio CD  
Audio CDs contain music tracks only.  
You will recognize Audio CDs by this logo.  
Safet y Infor m at ion  
Do not expose the system to excessive moisture, rain, sand,  
or heat sources.  
In addition, this unit can play a CD-R, CD-RW or MP3 data.  
Place the player on a firm, flat surface.  
Keep the player away from domestic heating equipment  
and direct sunlight.  
In a cabinet, allow about 2.5 cm (1 inch) of free space all  
around the player for adequate ventilation.  
If the DVD Player cannot read CDs/DVDs correctly, use a  
commonly available cleaning CD/DVD to clean the lens  
before taking the DVD Player to be repaired. Other  
cleaning methods may destroy the lens.Always keep the  
tray closed to avoid dust on the lens.  
Notes:  
Depending on the conditions of the recording equipment or  
the CD-R/CD-RW, some CD-R/CD-RW can not be played on  
this unit.  
The unit can not play CD-R/CD-RW that contain no data or  
data other than MP3.  
The lens may cloud over when the DVD Player is suddenly  
moved from cold to warm surroundings. Playing a CD/DVD is  
not possible then. Leave the power on for about one hour with  
no disc in the unit until normal playback is possible.  
Cleaning Discs  
When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center out.  
Do not use solvents such as benzine, thinner, commercially  
available cleaners, or anti-static spray intended for analog  
discs.  
7
IN T RO DU C T IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional O verview  
Front Panel and Display  
STAN DBY-O N  
; PAUSE  
switches the player to ON or OFF  
interrupts playback  
STAN DBY IN DICATO R  
lights red when the player is in Standby  
mode (off)  
2 PLAY  
starts playback  
9 STO P  
stops playback  
DISPLAY  
shows the current status of the player  
/ O PEN /CLO SE  
opens/closes the disc tray  
DISC TRAY  
insert a disc here  
MP3 VCD  
CD DVD  
A
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
Rem ot e Sensor  
S PREV  
go to beginning of current title/chapter/  
track or to PREVious title/chapter/track  
press and hold for a fast reverse search  
T N EXT  
go to NEXT title/chapter/track  
press and hold for a fast forward search  
MP3 VCD  
CD DVD  
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
Indicates current player function:  
Playback, Pause, etc.  
MP3 disc inserted  
Video CD inserted  
TITLE Current Title number  
CHP/TRK Current Chapter orTrack number  
PROG. PROGRAM playback active  
MP3  
VCD  
CD  
RANDO M RANDOM playback active  
Audio CD inserted  
DVD inserted  
ANGLE active  
A
B
REPEAT A-B active  
DVD  
ALL  
REPEAT active  
8
FU N C T IO N AL O VERVIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rem ot e Cont rol  
0-9 num er ical key pad  
select numbered items in a  
menu  
POW ER  
switch DVD Player ON or OFF  
POWER  
RET URN  
DISC MEN U  
access menu of a DVD disc  
remove the DVD Players menu  
1
4
2
5
8
0
3
6
DISPLAY  
access the On-Screen Display  
SYSTEM MEN U  
access or remove DVD Players  
menu  
7
9
RETURN  
DISPLAY  
T
search forward* / go to next  
chapter or track  
DISC  
SYSTEM  
1 2 3 4  
MENU  
MENU  
(left/right/up/down) select an  
item in the menu  
S
search backward* / go to  
beginning of current chapter or  
track or go to previous chapter  
or track  
OK  
O K  
acknowledge menu selection  
PLAY  
STOP  
PAUSE  
TITLE  
* Press and hold key for about two  
seconds  
STO P ( 9 )  
stops playback  
CLEAR MARKER FTS  
PLAY ( 2 )  
starts playback  
SUBT IT LE  
SUBTITLE ANGLE ZOOM AUDIO  
select a subtitle language  
PAUSE ( ; )  
REPEAT  
A-B RANDOM SOUND  
AN GLE  
select DVD camera angle  
pause playback temporarily /  
frame-by-frame playback  
ZO O M  
enlarge video image  
CLEAR  
clear a track number on the  
PROGRAM menu or a mark on  
the MARKER SEARCH menu  
AUDIO  
select an audio language (DVD)  
or an audio channel (Audio CD)  
MARKER  
access or remove MARKER  
SEARCH menu  
REPEAT  
repeat chapter, track, title, disc  
FTS (PRO GRAM)  
access or remove PROGRAM  
menu  
A-B  
repeat sequence  
RAN DO M  
play tracks in random order  
T IT LE  
display the Title menu of the  
disc if available  
SO UN D  
select 3D SURROUND during  
disc playback  
9
FU N C T IO N AL O VERVIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
O PTICAL (Digit al audio out jack)  
connect to digital (optical) audio equipment  
CO AXIAL (Digit al audio out jack)  
connect to digital (coaxial) audio equipment  
AC Power Cord  
connect to a power source  
AUDIO O UT (Left /Right ) 1, 2  
connect to an amplifier, receiver or stereo system  
VIDEO O UTPUT Swit ch  
select either S-Video Out or Component Video Out,  
depending on how you connected the DVD Player to the TV  
S-VIDEO O UT (Y/C)  
connect to a TV with S-Video (Y/C) inputs  
CO MPO N EN T VIDEO O UT Y PR/CR PB/CB  
connect to a TV with Y PB/CB PR/CR inputs  
VIDEO O UT (CVBS)  
connect to a TV with CVBS video inputs  
Caution: Do not touch the inner pins of the jacks  
on the rear panel. Electrostatic discharge m ay  
cause perm anent dam age to the unit.  
10  
FU N C T IO N AL O VERVIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
S-Video (Y/C) connection  
Gener al N ot es  
1
2
Connect the S-VIDEO OUT jack on the DVD Player to the  
S-Video in jack on the TV using an optional S-Video cable  
(Y).  
Connect the Left and Right AUDIO OUT jacks (1 or 2) of  
the DVD Player to the audio left/right in jacks on the TV  
(A) using the supplied audio cables.  
Depending on yourTV and other equipment you wish to  
connect, there are various ways you could connect the  
player. Use only one of the connections described below.  
Please refer to the manuals of yourTV,VCR, Stereo System  
or other devices as necessary to make the best  
connections.  
For better sound reproduction, connect the players audio  
out jacks to the audio in jacks of your amplifier, receiver,  
stereo or audio/video equipment. See Connecting to  
optional equipment.’  
Video (CVBS) connection  
1
2
Connect the VIDEO OUT jack on the DVD Player to the  
video in jack on the TV using the video cable supplied (X).  
Connect the Left and Right AUDIO OUT jacks (1 or 2) of  
the DVD Player to the audio left/right in jacks on the TV  
(A) using the supplied audio cables.  
Caution:  
Make sure the DVD Player is connected  
directly to the TV. Set the TV to the correct video  
input channel.  
TV  
Do not connect the DVD Players audio out  
jack to the phono in jack of your audio system .  
Do not connect your DVD Player via your  
VCR.The DVD im age could be distorted by the  
copy protection system .  
Connect ing t o a TV  
Make one of the following connections, depending on the  
capabilities of your existing equipment.  
When using the COMPONENTVIDEO OUT jacks, set the  
VIDEO OUTPUT switch to COMPONENT.When using  
the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to  
S-VIDEO.  
Z
Y
A
X
Com ponent Video ( Y PR/CR PB/CB)  
connection  
1
2
Connect the PB/CB PR/CR Y COMPONENTVIDEO OUT  
jacks on the DVD Player to the corresponding in jacks on  
the TV using an optional PR/CR PB/CB Y cable (Z).  
Connect the Left and Right AUDIO OUT jacks (1 or 2) of  
the DVD Player to the audio left/right in jacks on the TV  
(A) using the supplied audio cables.  
11  
PREPARAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Multi-channel sound  
Connect ing t o O pt ional  
Equipm ent  
A digital multi-channel connection provides the best sound  
quality. For this you need a multi-channel Audio/Video  
receiver that supports one or more of the audio formats  
supported by your DVD Player (MPEG 2, Dolby DigitalTM  
and DTS). Check the receiver manual and the logos on the  
front of the receiver.  
Connecting to an am plifier equipped with  
two channel analog stereo or Dolby  
Surround  
W arning:  
1
Connect the Left and Right AUDIO OUT jacks of the DVD  
Player to the audio left and right in jacks on your amplifier,  
receiver or stereo system, using the supplied audio cables (A).  
Due to the DTS Licensing agreem ent, the digital  
output will be in DTS digital out when DTS audio  
stream is selected.  
Connecting to an am plifier equipped with  
two channel digital stereo (PCM) or to an  
Audio/Video receiver equipped with a  
m ulti-channel decoder (Dolby Digital,  
MPEG 2 or DTS)  
Notes:  
If the audio format of the digital output does not match the  
capabilities of your receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
Six Channel Digital Surround Sound via digital connection  
can only be obtained if your receiver is equipped with a Digital  
Multi-channel decoder.  
1
2
Connect one of the DVD Players DIGITAL AUDIO OUT  
jacks (OPTICAL G or COAXIAL F) to the corresponding  
in jack on your amplifier. Use an optional digital (optical G  
or coaxial F) audio cable.  
To see the selected audio format of the current DVD in the  
Display, press SYSTEM MENU or AUDIO.  
You will need to activate the players digital output (see  
Personal Preferenceson page 14).  
AMPLIFIER  
G
F
A
Y
Z
X
TV  
12  
PREPARAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gener al Explanat ion  
Tem por ar y Feedback Field  
Icons  
This manual gives the basic instructions for operating the  
DVD Player. Some DVDs require specific operation or  
allow only limited operation during playback.When this  
TITLE  
Repeat Title  
CHAPT  
occurs, the symbol  
appears on the TV screen, indicating  
Repeat Chapter  
that the operation is not permitted by the DVD Player or is  
not available on the disc.  
ALL  
Repeat All  
TRACK  
Repeat Track  
A
B
Repeat A-B  
Rem ote control operation  
Resume play from this point  
Unless stated, all operations can be carried out with the  
remote control. Always point the remote control directly at  
the player, making sure there are no obstructions between  
the remote and the player.  
Action prohibited or not available  
Corresponding keys on the front panel of the player can  
also be used.  
Per sonal Preferences  
You can set your own personal preferences on the player.  
O n-screen display operation  
A number of operations can be carried out via the on-  
screen display on the screen. Access the on-screen display  
by pressing the DISPLAY button on the remote control.  
Pressing DISPLAY again will clear the on-screen display  
from the screen.  
Press 3or 4to select an item; the selected item will be  
highlighted.  
Press 1or 2to change the setting of an item. For some  
functions, the setting will be registered immediately; for  
others, OK must be pressed.  
General operation  
1
2
Press SYSTEM MENU on the remote control.  
G
The Personal Preferences menu appears.  
Press 3/4to select the desired item.  
The screen will show the current setting for the  
G
selected item, as well as alternate setting(s).  
While the desired item is selected, press B, then 3/4to  
select the desired setting.  
Press OK to confirm your selection.  
The following items can be adapted.  
Press SYSTEM MENU to remove the menu when you are  
finished.  
3
4
5
O n-Screen Display  
The following information will appear for about 10 seconds  
when you press the DISPLAY button on the remote control.  
Picture  
DVD  
TV Aspect  
1
1
Title  
Chapter  
If you have a widescreen (16:9)TV, select 16:9 Wide.  
If you have a regular (4:3)TV, select 4:3 Letterbox for a  
wide-screenpicture with black bars at the top and bottom  
of the screen, or select 4:3 Panscan for a full-height picture  
with the sides trimmed. If a disc supports the format, the  
picture will be shown accordingly.  
0:16:57  
Time search  
1
ENG  
D
Audio language and Digital Audio Output mode  
6
CH  
OFF  
Subtitle language  
Angle  
1
NORM.  
Sound  
4:3 Letterbox  
4:3 Panscan  
16:9 Wide  
Disc Audio  
Disc Subtitle  
Disc Menu  
Audio CD/Video CD without PBC (Playback Control)  
Rating  
Tracks  
Password  
1
TV Aspect  
Elapsed playback time  
0:16:57  
Menu Language  
Digital Audio Output  
STER.  
Audio channel  
NORM.  
Sound  
Others  
Video CD with PBC  
PBC ON  
PBC  
Elapsed playback time  
0:16:57  
STER.  
Audio channel  
NORM.  
Sound  
13  
PREPARAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Language  
Sound  
Select the language for the DVD Players Menu.This is the  
menu you see when you press the SYSTEM MENU button.  
Digital Audio O utput  
Each DVD disc has a variety of audio output options. Set  
the players Digital Audio Output according to the type of  
audio system you use.  
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/ PCMif  
you connected the DVD Players DIGITAL OUT jack to a  
Dolby Digital decoder (or an amplifier or other equipment  
with a Dolby Digital decoder).  
Stream/PCM: Select Stream/PCMif you connected the  
DVD Players DIGITAL OUT jack to an amplifier or other  
equipment with a DTS decoder, Dolby Digital decoder or  
MPEG decoder.  
English  
Spanish  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Password  
TV Aspect  
Menu Language  
Digital Audio Output  
Others  
PCM: Select PCMif you connected the DVD Players  
DIGITAL OUT jack to an amplifier or other equipment with  
linear PCM only (or Mini Disc (MD) recorder or Digital  
Audio Tape (DAT) deck).  
O thers  
Dynam ic Range (DRC)  
With the DVD format, you can hear a programs  
soundtrack in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However, you  
may wish to compress the dynamic range of the audio  
output (the difference between the loudest sounds and the  
quietest ones).Then, you may listen to a movie at a lower  
volume without losing dialog intelligibility. Set DRC to On  
for this effect.  
DOLBY  
DIGITAL /PCM  
Stream/PCM  
PCM  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Password  
Sample Freq.  
48 KHz  
TV Aspect  
Menu Language  
Digital Audio Output  
96KHz  
Others  
PBC  
Set Playback Control (PBC) to On or Off.  
- On:Video CDs with PBC are played according to the  
PBC.  
- Off:Video CDs with PBC are played the same way as  
Audio CDs.  
Sam ple Frequency  
To change the Sample Frequency setting, first select the  
desired Digital Audio Output as indicated above.  
If your receiver or amplifier is NOT capable of handling  
96KHz signals, select 48KHz.When this choice is made, this  
unit will automatically convert any 96KHz signals to 48KHz  
so your system can decode them.  
If your receiver or amplifier is capable of handling 96KHz  
signals, select 96KHz.When this choice is made, this unit will  
pass each type of signal through without any further  
processing.  
Vocal  
Set Vocal to On only when a multi-channel karaoke DVD is  
playing.The karaoke channels on the disc will mix into a  
normal stereo sound.  
DRC Off  
Vocal On  
PBC On  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Password  
Language  
TV Aspect  
Menu Language  
Digital Audio Output  
Language (Disc Audio, Disc Subtitle and Disc  
Menu)  
Select a language for the discs Menu,Audio and Subtitle.  
Audio language and Subtitle language also can be adapted  
using the Menu bar. Press the 3/4buttons to select an  
item, then press the 1/2buttons to choose a setting in the  
On-Screen Display (menu bar).  
Others  
Original  
English  
Disc Audio  
Disc Subtitle  
Disc Menu  
French  
Rating  
German  
Spanish  
Italian  
Password  
TV Aspect  
Menu Language  
Digital Audio Output  
Chinese  
Polish  
Hungarian  
Russian  
Other — — — —  
Others  
14  
PREPARAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental control (DVD only)  
New  
Disc Audio  
Disc Subtitle  
Disc Menu  
— — — —  
Movies on DVDs may contain scenes not suitable for  
children.Therefore, discs may contain Parental Control’  
information that applies to the complete disc or to  
certain scenes on the disc.These scenes are rated from 1  
to 8, and alternative, more suitable scenes are available on  
some discs. Ratings are country dependent.The Parental  
Controlfeature allows you to prevent discs from being  
played by your children or to have certain discs played with  
alternative scenes.  
Rating  
Password  
TV Aspect  
Menu Language  
Digital Audio Output  
Others  
Changing the 4-digit code  
Rating  
1
2
3
4
5
6
7
8
Press SYSTEM MENU to display the DVD Players Menu.  
Select Password using the 3/4keys.  
While Password is selected, press B.  
Enter the old code, then press OK.  
Select Change using the 3/4keys.  
Press OK.  
1
2
3
4
Press SYSTEM MENU to display the DVD Players Menu.  
Select Rating using the 3/4keys.  
While Rating is selected, press B.  
Enter your 4-digit password now. Use the numerical keys to  
enter your code, then press OK.  
Select a rating from 1 to 8 using the 3/4keys.  
5
Enter the new 4-digit code, then press OK.  
Unlock:  
Enter exactly the same code a second time and verify by  
pressing OK.  
Press SYSTEM MENU to exit the menu.  
If you select Unlock, Parental Control is not active.The Disc  
will play in full.  
9
Ratings 1 to 8:  
If you forget your 4-digit code  
Some discs contain scenes not suitable for children. If you  
set a rating for the player, all disc scenes with the same  
rating or lower will be played. Higher rated scenes will not  
be played unless an alternative scene is available on the disc.  
The alternative must have the same rating or a lower one. If  
no suitable alternative is found, playback will stop.You must  
enter the 4-digit code or change the rating level in order to  
play the disc.  
If you forget your password, to clear the current password,  
follow the procedure below.  
1
2
Press SYSTEM MENU to display the DVD Players Menu.  
Enter the 6-digit number 210499.  
GThe 4-digit password is cleared.P CLrappears on the  
display.The message will appear if the disc tray is closed. It  
will be on the display until you try another feature.  
6
Press OK to confirm your rating selection, then press  
SYSTEM MENU to exit the menu.  
3
Enter a new code as described at left (Password).  
If a Disc will not play  
8
Disc Audio  
Disc Subtitle  
Disc Menu  
7
If you insert a disc that exceeds the rating level you set, you  
may see the message "Parental Control Limit." If so, you  
must set "Rating" to "Unlock" in the DVD Player menu.  
Follow steps 1-6 for Parental Control Rating, choosing  
"Unlock" at step 5. After you set "Rating" to "Unlock," the  
disc will play as usual.  
6
Rating  
5
Password  
4
TV Aspect  
3
Menu Language  
Digital Audio Output  
2
1
Unlock  
Or, you may see this message if you insert a disc that  
exceeds the rating level: "The parental setting of this player  
prohibits play.Would you like to allow this disc to play?"  
Press the 1/2buttons to select "Yes" or "No," then press  
the OK button. If you select "No," a message will remind  
you that the disc will not play. Press the OPEN/CLOSE  
button to remove the disc.  
Or, if you select "Yes," next press the numerical keys to  
enter your four-digit password, then press the OK button.  
The disc will be available for playback as usual.  
Others  
Password  
1
To set the Password for the first time, press SYSTEM  
MENU to display the DVD Players Menu.  
Select Password using the 3/4keys.  
2
3
4
While Password is selected, press B.  
Enter the 4-digit password using the numeric keys (0-9),  
then press OK.  
5
6
Enter the 4-digit password again to verify it, then press OK.  
Notes:  
The messages will vary among discs.  
After you clear a message as described above, the disc will  
play as usual. However, if you turn off the DVD Player or open  
the disc tray, you will repeat these steps again if you try to play  
the same disc later.  
Press SYSTEM MENU to remove the menu.  
Note: Confirmation of the 4-digit code is necessary when the  
code is changed (see Changing the 4-digit code).  
15  
PREPARAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O peration  
Parental Control Disclaim er  
Notes:  
DVDs may have a region code.  
This DVD Player features the PARENTAL CONTROL  
system, which is intended to be active when playing DVD  
discs with certain software coding.This is according to  
technical standards adopted by the set maker and disc  
content industries.  
Your player will not play discs that have a region code  
different from your player.The region code for this player is 1  
(one).  
Please note that PARENTAL CONTROL will not control a  
DVD that does not have the appropriate software coding.  
At the time of release of this DVD Player, certain aspects of  
the technical standards had not been settled between set  
makers and the disc content industries.  
For these reasons, Philips cannot guarantee the functioning  
of PARENTAL CONTROL and denies any liability  
associated with unintended watching of discs.  
Gener al Feat ures  
Note:  
– Unless stated, all operations described are based on remote  
control use. Some operations can be carried out using the  
DVD Players menu.  
If in doubt, please make sure the disc plays according to  
your PARENTAL CONTROL settings before you allow  
children access to the DVD Player.  
POWER  
Moving to another TITLE  
1
4
2
5
8
0
3
6
When a disc has more than one title, you  
can move to another title as follows:  
Press DISPLAY when playback is stopped,  
then press the appropriate numerical key  
(0-9) to select a title number.  
7
9
RETURN  
DISPLAY  
DISC  
SYSTEM  
Loading Discs  
MENU  
MENU  
1
2
Press OPEN/CLOSE on the front of the player to open the  
disc tray.  
Load your chosen disc in the tray, with the label facing up.  
When a double-sided DVD is inserted, make sure the side  
you want to play is facing up.  
Press OPEN/CLOSE again to close the tray.  
G READING appears on the TV screen, and playback  
starts automatically. In some cases, the disc menu might  
appear instead.  
Moving to another CHAPTER/  
TRACK  
When a title on a disc has more than one  
chapter or a disc has more than one track,  
you can move to another chapter/track as  
follows:  
DISC  
SYSTEM  
MENU  
MENU  
OK  
PLAY  
STOP  
PAUSE  
TITLE  
3
CLEAR MARKER FTS  
Press Tor Sbriefly during playback to select the  
next chapter/track or to return to the beginning of the  
current chapter/track.  
Note:  
Press Stwice briefly to step back to the previous  
chapter/track.  
If ‘Parental Control’ is set and the disc is not within the  
‘Rating’ settings (not authorized), the 4-digit code must be  
entered and/or the disc must be authorized (see Parental  
Control’ on page 15).  
To go directly to any chapter during DVD playback, press  
DISPLAY.Then, press 3/4 to select C (chapter) (or for a  
Video CD, select T for track).Then, enter the chapter/track  
number using the numerical keys (0-9).  
Playing DVD and Video CD  
discs  
Note:  
For two-digit numbers, press the keys in rapid succession.  
RETURN  
DISPLAY  
After inserting the disc  
and closing the tray,  
Slow Motion  
0
DISC  
SYSTEM  
MENU  
MENU  
Press PAUSE during playback.  
GThe player will enter PAUSE mode.  
Use the 1/2keys to enter the SLOW  
mode.  
Use the 1/2keys to select the required speed: ,1/16, ,  
1/8, ,1/4 or ,1/2 (backward), or  
.1/16, .1/8, .1/4 or .1/2 (forward).  
If PAUSE is pressed again, the speed will be set to zero  
(PAUSE) and playback will pause.  
OK  
playback starts automatically, depending on the disc.The  
players display shows the type of disc loaded, as well as the  
discs information and playing time.  
The disc may invite you to select an item from a menu. If  
the selections are numbered, press the appropriate  
numerical key; if not, use the 3/4, 1/2keys to highlight  
your selection, then press OK.  
The number of the current title and chapter are displayed.  
Playback may stop at the end of the Title, and you may  
return to the disc menu.To go to the next title, press PLAY.  
To stop playback, press STOP.  
PLAY  
STOP  
PAUSE  
To exit slow motion mode, press PLAY.  
Note:  
Slow motion playback in reverse is not applicable forVideo  
CD.  
GThe default screen will appear.  
GThe screen saver picture appears when you leave the  
DVD Player in stop mode for about five minutes.  
G After the Screen Saver has been engaged for about five  
minutes, the DVD Player will automatically turn itself off.  
You can resume playback from the point at which you  
stopped playback. If you see the Resume icon  
on the  
screen when you stop playback, press PLAY to resume  
playback from that point.  
16  
O P ERAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC  
SYSTEM  
MENU  
MENU  
Still Picture and Fram e-by-fram e  
playback  
Repeat A-B  
To repeat a sequence in a title:  
A
B
PLAY  
STOP  
PAUSE  
TITLE  
OK  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
Press A-B at your chosen starting point.  
G A- appears briefly on the TV screen.  
Press A-B again at your chosen end point.  
PLAY  
Press PAUSE during playback.  
GThe player will now go into PAUSE mode.  
STOP  
PAUSE  
TITLE  
REPEAT  
A-B RANDOM SOUND  
CLEAR MARKER FTS  
You can advance the picture frame by frame by pressing  
PAUSE or 3 repeatedly on the remote control.  
You can reverse the picture frame by frame by pressing 4  
repeatedly on the remote control.  
G A-B appears briefly on the TV screen, and the repeat  
sequence begins(a-b repeat appears on the players display).  
To cancel the sequence, press A-B.  
Note:  
POWER  
0:16:57  
- : - - : - -  
Tim e search  
You can not reverse the picture frame by frame forVideo  
CD.  
1
4
2
5
8
0
3
6
The Time Search function allows you to  
start playing at any chosen time on the disc.  
Press DISPLAY during playback.The on-  
screen display appears on the screen.  
GThe Time Search box shows the elapsed  
playing time of the current disc.  
7
9
RETURN  
DISPLAY  
DISC  
SYSTEM  
Search  
MENU  
MENU  
MENU  
MENU  
OK  
OK  
Press and hold Tor Sfor about two  
seconds during playback.  
GThe player will now go into SEARCH  
mode.  
Press and hold Tor Srepeatedly to select the  
required speed: 5X2, 5X4, 5X16, 5X100 (backward)  
or 6X2, 6X4, 6X16, 6X100 (forward).  
To exit SEARCH mode, press PLAY.  
With aVideo CD, the Search speed changes: 5X2, 5X4,  
5X8 (backward) or 6X2, 6X4, 6X8 (forward).  
PLAY  
STOP  
PAUSE  
TITLE  
CLEAR MARKER FTS  
Press 3/4to select the Time Search icon in the on-screen  
display.  
GThe -:--:--appears in the Time Search box.  
Use the numerical keys to enter the required start time.  
Enter hours, minutes and seconds from left to right in the  
box.  
G If you enter the wrong numbers, press CLEAR to  
remove the numbers you entered.Then enter the correct  
numbers.  
TITLE  
TRACK  
Repeat  
Press OK to confirm the start time.  
PLAY  
STOP  
PAUSE  
TITLE  
G Playback starts from the selected time on the disc. If you  
enter an invalid time, playback will continue from the  
current point.  
DVD Video Discs - Repeat Chapter/  
Title/O ff  
To repeat the currently playing chapter, press  
REPEAT.  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
Note:  
GThe Repeat Chapter icon appears on the TV screen.  
To repeat the title currently playing, press REPEAT a second  
time.  
GThe Repeat Title icon appears on the TV screen.  
To exit Repeat mode, press REPEAT a third time.  
GThe Repeat O ff icon appears on the TV screen.  
Time Search is not supported forVideo CD.  
0
Zoom  
DISC  
SYSTEM  
MENU  
MENU  
The Zoom function allows you to enlarge  
the video image and to move through the  
enlarged image.  
Press ZOOM during playback or still  
playback to activate the Zoom function.  
G If you press ZOOM repeatedly, the  
magnification level increases up to six times.  
Use the 1 2 3 4keys to move through the zoomed  
picture.  
Press CLEAR to resume normal playback or return to the  
paused image.  
OK  
PLAY  
STOP  
PAUSE  
TITLE  
Video CDs - Repeat Track/All/O ff  
CLEAR MARKER FTS  
To repeat the track currently playing, press REPEAT.  
GThe Repeat Track icon appears on the TV screen.  
To repeat the entire disc, press REPEAT a second time.  
GThe Repeat All icon appears on the TV screen.  
To exit Repeat mode, press REPEAT a third time.  
GThe Repeat O ff icon appears on the TV screen.  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
Note:  
– On a Video CD with PBC, you must set PBC to Off under  
Personal Preference to use the Repeat function. See page 14.  
17  
O P ERAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Marker search  
You can start playback from a memorized point. Up to nine  
points can be memorized.  
Special DVD Feat ures  
Checking the contents of DVD Video discs:  
Menus  
To enter a mark, follow these steps.  
DVDs may contain menus that allow you to access special  
features.To use the disc menu, press the appropriate  
numerical key; or, use the 3412keys to highlight your  
selection, then press OK.  
1
2
3
During disc playback, press MARKER.  
GThe MARKER SEARCH menu will appear on the TV  
screen briefly.  
During playback , press OK when playback reaches the spot  
that you want to memorize.  
Title m enus  
GThe Marker number appears.  
To enter additional Marker points, press 1/2until another  
empty point on the MARKER SEARCH menu is highlighted,  
then press OK.  
Repeat steps 2 and 3 to enter up to nine Marker points on  
a disc.  
PressTITLE.  
PLAY  
STOP  
PAUSE  
TITLE  
G If the current title has a menu, the menu  
will appear on the screen. Otherwise, the  
disc menu will be displayed.  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
4
5
The menu can list camera angles, spoken  
language and subtitle options, and chapters for the title.  
To remove the title menu, pressTITLE again.  
To remove the MARKER SEARCH menu, press MARKER.  
The marked spots will remain in the players memory as  
long as the disc is not changed.The Marker memory will  
remain active if the disc is stopped. It will be lost if the disc  
is removed from the player, if the disc tray is opened, or if  
the DVD Player is turned off.  
Disc m enu  
Press DISC MENU.  
GThe disc menu is displayed.  
To remove the disc menu, press DISC  
MENU again.  
7
8
0
9
RETURN  
DISPLAY  
DISC  
SYSTEM  
MENU  
MENU  
OK  
MARKER SEARCH  
Cam era Angle  
PLAY  
STOP  
PAUSE  
TITLE  
If the disc contains sequences recorded from  
different camera angles, the angle icon blinks  
on the display.You can then change the  
camera angle if you wish.  
CLEAR MARKER FTS  
To Recall a Marked Scene  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
1
During disc playback, press MARKER.  
GThe MARKER SEARCH menu will appear on the screen.  
Press 1/2to select a Marker number that you want to recall.  
Press ANGLE repeatedly during playback to select a  
desired angle.  
2
3
Press OK.  
GThe number of the current angle appears on the display.  
G Playback will start from the Marked scene.  
To remove the MARKER SEARCH menu, press MARKER.  
4
1
To clear a Marked Scene  
Changing the audio language  
1
2
3
During disc playback, press MARKER.  
GThe MARKER SEARCH menu will appear on the screen.  
Press 1/2to select the Marker number that you want to  
erase.  
PLAY  
STOP  
PAUSE  
TITLE  
Press AUDIO repeatedly during playback to  
hear a different audio language or audio  
track.  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
1
ENG  
D
Press CLEAR.  
6 CH  
GThe Marker number will be erased from the list.  
Repeat steps 2 and 3 to erase additional Marker numbers.  
4
5
To remove the MARKER SEARCH menu, press MARKER.  
PLAY  
STOP  
PAUSE  
Subtitles  
Press SUBTITLE repeatedly during playback  
to see the different subtitle languages.  
CLEAR MARKER FTS  
TITLE  
Mem orizing Settings for Viewed disc  
(Condition Mem ory)  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
This player memorizes the last scene for the last disc you  
have watched. Settings remain in memory even if you  
remove the disc from the player or switch off the player. If  
you load a disc that has its settings memorized, the latest  
stop position is automatically recalled.  
1
ENG  
Note:  
If  
appears, the feature is not available on the disc.  
Notes:  
Settings are stored in memory for use any time.  
Switching of the audio mode, etc., is automatic on some  
discs.  
This player does not memorize settings if you switch off the  
player when a DVD or title menu appears on theTV screen.  
18  
O P ERAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OK  
Moving to another track  
Special VCD Feat ures  
Press Tor Sbriefly during playback  
to go to the next track or to return to the  
beginning of the current track.  
Press Stwice briefly to step back to the  
previous track.  
PLAY  
STOP  
PAUSE  
TITLE  
CLEAR MARKER FTS  
Playback Control (PBC)  
Load aVideo CD with PBC and press PLAY.  
SUBTITLE ANGLE ZOOM AUIDO  
Go through the menu with the keys indicated on the TV  
screen until your chosen passage starts to play. If a PBC  
menu includes titles, you can select a title directly.  
Enter your choice with the numerical keys (0-9).  
Press RETURN to go back to the previous menu.  
You also may set PBC to Off under Personal Preferences.  
To go directly to any track, enter the track number using  
the numerical keys (0-9) during playback.  
Random  
Press RANDOM during playback or when  
playback is stopped.  
PLAY  
STOP  
PAUSE  
TITLE  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
GThe unit automatically begins Random  
Playback and RANDOM appears on the  
display.  
Playing an Audio CD  
After inserting the Audio CD and closing the  
tray, the number of total tracks and the total  
playing time of the disc will appear on the display. Press  
PLAY to start playback.  
During playback, the current track number and its elapsed  
playing time will appear on the display.  
To return to normal playback, press RANDOM again.  
Repeat Track/All  
To repeat the track currently playing, press  
REPEAT.  
G appears on the player display.  
To repeat the entire disc, press REPEAT a  
second time.  
G ALL and appears on the player display.  
To exit Repeat mode, press REPEAT a third time.  
PLAY  
STOP  
PAUSE  
TITLE  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
Playback will stop at the end of the disc.  
To stop playback at any other time, press STOP.  
REPEAT  
A-B RANDOM SOUND  
Pause  
Press PAUSE during playback.  
To return to playback, press PLAY.  
PLAY  
STOP  
PAUSE  
TITLE  
CLEAR MARKER FTS  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
Repeat A-B  
PLAY  
STOP  
PAUSE  
To repeat a sequence:  
During disc playback, press A-B at your  
chosen starting point.  
G A appears on the player display.  
Press A-B again at your chosen end point.  
G A B appears on the display, and the sequence  
begins to play repeatedly.  
CLEAR MARKER FTS  
TITLE  
Search  
OK  
SUBTITLE ANGLE ZOOM AUIDO  
REPEAT  
A-B RANDOM SOUND  
To search forward or backward through the  
disc at two times the normal speed, hold  
down Tor Sfor about two seconds  
during playback.  
G Search begins, and sound is partially muted.  
To step up to four times the normal speed, hold down  
Tor Sagain.  
G Search goes to four times the speed, and the sound is  
partially muted.  
PLAY  
STOP  
PAUSE  
CLEAR MARKER FTS  
TITLE  
SUBTITLE ANGLE ZOOM AUIDO  
To exit the sequence and return to normal play, press A-B  
again.  
To step up to eight times the normal speed, hold down  
Tor Sagain.  
G Search goes to eight times the speed, and the sound is  
partially muted.  
To return to two times the normal speed, hold down T  
or Sagain.  
If the TV is on, search speed and direction are indicated on  
the screen each time Tor Sis pressed.  
To end the search, press PLAY to resume playback or STOP  
to stop playback.The search will stop if the beginning or  
end of the disc is reached. If the beginning of the disc is  
reached, playback may begin again.  
19  
O P ERAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The restriction of playing MP3  
Progr am  
Program allows you to store your favorite tracks for a  
particular disc in the player memory.  
This unit can play up to 200 files per disc. A disc having  
more than 200 files cannot be played.  
The unit may not play MP3 files in the order that you  
recorded them on the disc.  
With a multi-session disc, the player plays only the last  
session.  
A Program can contain 20 tracks.  
Program FTS  
Step  
Total Time  
0:00:00  
1
It may take over 30 seconds to read the MP3 files,  
depending on the contents of the disc.  
Clear All  
The lim itation of indications  
Up to 8 characters are displayed for the name of a track.  
Characters other than uppercase letters (Ato Z),  
numericals (0to 9) and underscore (_) may not be  
displayed, or may be displayed in different characters.  
The elapsed playing time on the display may not be correct  
when playing MP3 files.  
Storing a Program  
1
2
Load a disc and stop playback.  
Press FTS.  
GThe program menu appears on the screen  
Tips on recording MP3  
3
4
Enter the track number using the numerical keys (0-9).  
To enjoy high quality sound, convert to MP3 files with a  
sampling frequency of 44.1kHz and a fixed bit rate of 128  
kbps.  
Press 2to move to the next slot, then repeat step 3 to  
enter other tracks.  
GThe number of tracks and the playing time of the  
program will be shown on the screen.  
Press PLAY or OK to exit the screen. Playback will begin  
immediately.  
To play MP3 files in the order that you recorded  
them  
5
1
2
3
Writing software that is capable of recording MP3 files in  
numerical and alphabetical order is required.  
Include a two or three digit number at the beginning of  
each file name. (e.g.01,” “02,... or 001,” “002,...)  
Its recommended that you use only the root folder (do not  
create a child folder under the root folder).  
Erasing a track from a Program  
1
2
Press FTS to display the program menu.  
Use 1 2 3 4to select the track number you wish to  
erase.  
3
Press CLEAR.  
G The track number will be erased from the track list.  
Glossar y  
Extension:  
An extension is the last three characters that divide a file  
name by a period.The extension shows the attribution of  
the file or the software in which the file was created.  
Erasing the com plete Program  
1
Use 1 2 3 4to select Clear All, then press OK.  
G The complete Program for the disc will be erased.  
Session:  
A session is one section on a disc between the beginning of  
data and the end of written data.  
A multi-session disc has more than two sessions.  
Playing MP3 Recordings  
The DVD Player can play MP3 format recordings on CD-  
ROM, CD-R or CD-RW discs.  
Before playing MP3 recordings, read the following notes.  
Notes on MP3 recordings  
About MP3  
An MP3 file is audio data compressed by using MPEG1, the  
audio layer-3 file-coding scheme.We call files that have the  
.mp3file extension MP3 files.”  
The player can not read an MP3 file that has a file extension  
other than .mp3.”  
Noises may be heard if you play a non-MP3 file that has the  
.mp3extension.  
20  
O P ERAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erasing a track from a Program  
Playing MP3 Recordings  
1
Press FTS while playback is stopped.  
GThe E mark will appear.  
1
Insert a disc and close the tray.  
GThe MP3 menu appears on the TV screen.  
2
3
Press 2to move to the Program list.  
Note  
It may take over 30 seconds to read the MP3 files,  
depending on the contents of the disc.  
Use 3/4to select the track that you wish to erase from  
the Program list.  
4
Press CLEAR.  
GThe track will be erased from the Program.  
2
3
Press 3/4to select the MP3 file you want to play.  
Press PLAY.  
G Playback starts; playback will end when all tracks on the  
disc have played.  
Erasing the com plete Program  
1
2
Press FTS while playback is stopped.  
MP3  
MP3-1  
Program  
GThe E mark will appear.  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
TRACK 9.mp3  
Use 1/2to select Clear All, then press OK.  
GThe complete Program for the disc will be erased.  
GThe programs are also cleared when the disc is  
removed.  
Clear All  
MP3-Repeat track/all  
Moving to another track  
Press Tor Sbriefly during playback to go to the  
next track, or press 3/4to select the desired track in the  
menu and press PLAY.  
MP3 - Repeat track/all  
To repeat the track currently playing, press REPEAT.  
GThe Repeat icon appears to the right of the track name.  
To repeat all the tracks, press REPEAT a second time.  
GThe Repeat icon appears to the right of the directory  
name.  
To exit Repeat mode, press REPEAT a third time.  
GThe Repeat icon disappears.  
Pause  
Press PAUSE during playback.  
To return to playback, press PLAY or PAUSE again.  
Stop  
MP3  
MP3-1  
Program  
MP3  
MP3-1  
Program  
Press STOP during playback.  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
TRACK 9.mp3  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
TRACK 9.mp3  
Program m ed playback with MP3  
1
2
Insert the disc and close the tray.  
Clear All  
Clear All  
GThe MP3 menu is displayed on the TV screen.  
Press FTS while playback is stopped to enter the Program  
Edit mode.  
MP3 - Repeat Program s  
GThe E mark will appear to the right of the word Program  
on the right side of the MP3 menu.  
During Program playback, to repeat the current track, press  
REPEAT.  
GThe Repeat icon appears to the right of the track name.  
To repeat all of the programmed tracks, press REPEAT a  
second time.  
GThe Repeat icon appears to the right of Program.  
To exit Repeat mode, press REPEAT a third time.  
GThe Repeat icon disappears.  
Note  
Press RETURN or FTS to exit the Program Edit mode;  
the E mark will disappear.  
3
4
Press 3/4to select a track.  
Press OK to place the selected track on the MP3 Program.  
G Repeat steps 3 to 4 to place additional tracks in the  
program.  
Press PLAY to start.  
G Playback begins in the order in which you programmed  
the tracks.  
MP3  
Program  
MP3  
MP3-1  
Program  
MP3-1  
TRACK 2.mp3  
TRACK 7.mp3  
TRACK 6.mp3  
TRACK 9.mp3  
TRACK_2  
TRACK_7  
TRACK_6  
TRACK_9  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
TRACK 9.mp3  
TRACK_1  
TRACK_2  
TRACK_3  
TRACK_4  
TRACK_5  
TRACK_6  
TRACK_7  
TRACK_8  
TRACK_9  
5
Clear All  
Clear All  
G Playback stops after all of the tracks on the Program  
have played once.  
MP3  
MP3-1  
Program  
E
TRACK 2.mp3  
TRACK 7.mp3  
TRACK 6.mp3  
TRACK 9.mp3  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
TRACK 9.mp3  
Clear All  
21  
O P ERAT IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Requesting Service  
If it appears that the DVD Player is faulty, first consult this checklist. It may be that something has been overlooked. Under no  
circumstances should you attempt to repair the system yourself; this will invalidate the warranty.  
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).  
Sym pt om  
Rem edy  
No power  
Make sure the power cord is connected properly.  
Make sure there is power at the AC outlet by plugging in another  
appliance.  
No picture  
Check if the TV is on.  
Check the video connection.  
Distorted picture  
Check the disc for fingerprints. Clean the disc with a soft cloth, wiping from  
center to edge.  
Sometimes a small amount of picture distortion may appear.This is not a  
malfunction.  
No sound  
Check audio connections.  
If you are using a HiFi amplifier, try another sound source.  
If you are using a Receiver, select the DVD Player as the sound source at the  
receiver.  
Distorted sound from HiFi am plifier  
No audio at digital output  
Make sure no audio connections are made to the amplifiers phono input.  
Check the digital connections.  
Check the settings menu to make sure the digital output is set correctly.  
Check if the audio format of the selected audio language matches your  
receiver capabilities.  
Disc can not be played.  
Ensure the disc label is facing up.  
Clean the disc.  
Check if the disc is defective by trying another disc.  
Check if the disc is badly scratched or warped (not flat).  
No return to start-up screen when  
disc is rem oved  
Reset by switching the DVD Player off, then on again.  
Check to see if the Program requires another disc to be loaded.  
The DVD Player does not respond to  
the rem ote control.  
Aim the remote control directly at the DVD Player.  
Remove any obstacles between the DVD Player and the remote control.  
Inspect or replace the batteries in the remote control.  
Buttons do not work.  
In order to completely reset the player, unplug the AC power cord from the  
AC outlet.  
DVD Player does not respond to som e  
operating com m ands during  
playback.  
Operations may not be permitted by the disc. Refer to the instructions or  
menu of the disc. If  
appears, the feature is not available on the disc.  
DVD Player cannot read  
CDs/DVDs.  
Use a commonly available cleaning CD/DVD to clean the lens before  
sending the DVD Player for repair.  
You can only play finalized discs. If you are using CD-Rom, CD-R or CD-RW  
discs, make sure you have finalized the discs. Refer to your CD Recorder  
owners manual for details.  
22  
BEFO RE REQ U EST IN G SERVIC E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PLAYBACK SYSTEM  
DVD Video  
CO NNECTIO NS  
Y Output  
Cinch (green)  
Video CD and SVCD  
Audio CD (CD-R and CD-RW)  
DVD+RW  
PR Output  
PB Output  
S-Video Output  
Video Output  
Audio L+R output  
Digital Output  
Cinch (red)  
Cinch (blue)  
Mini DIN, 4 pins  
Cinch (yellow)  
Cinch (white/red)  
1 coaxial, 1 optical  
IEC958 for CDDA / LPCM  
IEC1937 for MPEG1/2, AC-3, DTS  
MP3  
O PTICAL READO UT SYSTEM  
Lasertype  
FDA CFR21  
Numerical Aperture  
0.60 (DVD)  
0.43 (VCD/CD)  
650 nm (DVD)  
780 nm (VCD/CD)  
Wavelength  
POW ER SUPPLY  
Power Inlet  
Power usage  
120V, 60Hz  
16 Watt  
DVD DISC FO RMAT  
Medium  
Diameter  
Power usage standby  
less than 3 Watt  
Optical Disc  
12cm (8cm)  
One layer  
Dual layer  
Two side  
CABINET  
Dimensions (w x h x d)  
Playing time (12cm)  
2.15 h*  
4 h*  
4.30 h*  
16.93 x 3.45 x 9.72 inches  
430 x 88 x 247 mm  
Approx. 6.6 pounds  
Approx. 3.0 Kg  
Weight  
Single layer  
Two side  
8 h*  
Dual layer  
GENERAL FUNCTIO NALITY  
Stop / Play / Pause  
VIDEO FO RMAT  
DA Converter  
Fast Forward / Backward  
Time Search (DVD)  
10 bits  
Signal handling  
Digital Compression  
Components  
MPEG2 for DVD,  
MPEG1 forVCD  
Step Forward/Backward  
Slow Motion  
Title / Chapter /Track Select  
Skip Next / Previous  
TV Standard  
Number of lines  
Playback  
NTSC  
525/60Hz  
Multistandard(PAL/NTSC)  
Repeat (Chapter /Title) or (Track / All)  
A-B Repeat  
Random (Shuffle)  
Enhanced ease of use graphical interface  
Zoom (6 steps)  
DVD  
Horizontal Resolution  
Vertical Resolution  
720 pixels  
480 lines  
3D Surround Sound  
DVD FUNCTIO NALITY  
VCD  
Multi-angle Selection  
Horizontal Resolution  
Vertical Resolution  
352 pixels  
240 lines  
Audio Selection (1 out of maximum eight languages)  
Subtitles Selection (1 out of maximum 32 languages)  
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Panscan)  
Parental Control  
VIDEO PERFO RMANCE  
Component video output  
Y: 1Vpp into 75 ohm  
PR/CR PB/CB: 0.7Vpp into 75 ohm  
1Vpp into 75 ohm  
Disc Menu support (Title Menu and Root Menu)  
Resume (one disc) after stop / standby  
Marker & Search with Favorite Scene  
Video output  
S-Video output  
Y: 1Vpp into 75 ohm  
C: 0.286Vpp into 75 ohm  
VIDEO CD FUNCTIO NALITY  
Playback Control forVCD 2.0 discs  
Resume (one disc) after stop / standby  
ProgrammingTracks (PBC Off)  
AUDIO FO RMAT  
Digital  
MPEG/AC-3/DTS/  
PCM  
Compressed Digital,  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
AUDIO CD FUNCTIO NALITY  
Time Display (Track)  
Analog Sound Stereo  
Dolby Surround downmix from Dolby Digital multi-channel sound  
3D Sound on two speakers  
Full audio functionality with remote control  
Programming with Favorite Track Selection  
AUDIO PERFO RMANCE  
DA Converter  
DVD  
MP3 FUNCTIO NALITY  
Time Display (Track)  
Programming with Favorite Track Selection  
24 bits  
fs 96 kHz  
fs 48 kHz  
fs 44.1 kHz  
fs 44.1 kHz  
fs 44.1 kHz  
fs 48 kHz  
4 Hz - 44 kHz  
4 Hz - 22 kHz  
4 Hz - 20 kHz  
4 Hz - 20 kHz  
4 Hz - 20 kHz  
4 Hz - 22 kHz  
100 dB  
Video CD  
CD  
SVCD  
*
typical playing time for movie with two spoken languages and three subtitle  
languages.  
Signal-Noise (1kHz)  
Specifications subject to change without prior notice.  
Dynamic Range (1kHz)  
Crosstalk (1kHz)  
95 dB  
90 dB  
Distortion and Noise (1kHz)  
0.008%  
23  
SP EC IFIC AT IO N S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
Digital Video Disc Player  
90 days Free Exchange / 91 daysOneYear Reduced-Cost Exchange  
WHO IS COVERED?  
showing proof of date of purchase.Attach it to the  
owners manual and keep both nearby.Also keep the  
original box and packing material in case you need to  
return your product.  
You must have proof of the date of purchase to  
exchange your product.A sales receipt or other docu-  
ment showing the date that you purchased the product  
is considered such proof.  
BEFORE EXCHANGING THE PRODUCT...  
Please check your owners manual before exchanging  
the product.Adjustments of the controls discussed  
there may save you time and money.  
WHAT IS COVERED?  
Warranty coverage begins the day you buy your prod-  
uct. For 90 days thereafter, you may exchange the defec-  
tive product for a new or renewed product at the store  
from which it was purchased or through Philips. Either  
exchange is made at no cost to you.  
LIMITATION OF LIABILITY AND REMEDY...  
Philips is not liable under any circumstances for any  
direct, indirect, special, incidental, or consequential dam-  
ages, howsoever incurred, even if notified of the possibil-  
ity of such damages.  
To the extent permitted by local law, the remedies pro-  
vided in this warranty statement are your sole and  
exclusive remedy.  
From 91 days to one year from the date of purchase, you  
will pay a preset exchange fee to obtain a new or  
renewed product. Follow the exchange procedures on  
the next page.This exchange opportunity ends one year  
after the date of purchase.The replacement product is  
covered only for the warranty period of the original  
product.When the warranty on the original product  
expires, the warranty on all replaced products also  
expires.  
This limited warranty gives you specific legal rights, and  
you may also have other rights which vary from  
state/province to state/province.  
WHAT IS EXCLUDED?  
TO EXCHANGE YOUR PRODUCT IN THE U.S.A.,  
PUERTO RICO, OR U.S. VIRGIN ISLANDS...  
Follow the instructions stated previously in the What is  
Coveredsection, or refer to the exchange instructions  
on the next page.  
In the U.S.A., Puerto Rico, and U.S.Virgin Islands, all  
implied warranties, including the implied warranties of  
non-infringement, merchantability and fitness for a par-  
ticular purpose, are specifically disclaimed, and to the  
extent inconsistent with law of the locality of the user,  
limited in duration to the duration of this express war-  
ranty. Because some states do not allow limitations on  
how long an implied warranty may last, this limitation  
may not apply to you.  
Your warranty does not cover:  
shipping charges to return defective product.  
labor charges for installation or setup of the prod-  
uct, adjustment of customer controls on the prod-  
uct, and installation or repair of antenna systems  
outside of the product.  
product repair and/or part replacement because of  
improper installation, abuse, neglect, misuse, accident,  
unauthorized repair or other cause not within the  
control of Philips Consumer Electronics.  
a product that requires modification or adaptation  
to enable it to operate in any country other than  
the country for which it was designed, manufactured,  
approved and/or authorized, or repair of products  
damaged by these modifications.  
TO EXCHANGE A PRODUCT IN CANADA...  
Please contact Philips at:  
incidental or consequential damages resulting from  
the product. (Some states do not allow the exclu-  
sion of incidental or consequential damages, so the  
above exclusion may not apply to you.This includes,  
but is not limited to, prerecorded material, whether  
copyrighted or not copyrighted.)  
a product that is used for commercial or institution-  
al purposes (including but not limited to rental pur-  
poses).  
1-800-661-6162 (French Speaking)  
1-800-363-7278 (English Speaking)  
In Canada, this warranty is given in lieu of all other war-  
ranties.There are no other warranties, express or  
implied, including any implied warranties of mer-  
chantability or fitness for a particular purpose.  
TO GET OUT-OF-WARRANTY EXCHANGE...  
In the U.S.A., Puerto Rico, or U.S.Virgin Islands, contact  
oup at 1-866-323-9916 to  
WHERE IS EXCHANGE AVAILABLE?  
Philips Service Solutions Gr  
obtain the cost of out-of-warranty exchange.  
Warranty exchange is available in all countries where  
the product is officially distributed by Philips Consumer  
Electronics. In countries where Philips Consumer  
Electronics does not distribute the product, the local  
Philips service organization will attempt to exchange the  
product, although there may be a delay if the appropri-  
ate product is not readily available.  
REMEMBER...  
Please record below the model and serial numbers  
found on the product.Also, please fill out and mail your  
warranty registration card promptly. It will be easier for  
us to notify you if necessary.  
MODEL #__________________________________  
SERIAL #__________________________________  
MAKE SURE YOU KEEP...  
Please keep your sales receipt or other document  
Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, (903) 242-4800  
EL6478E001 /2-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty (contd)  
EXCHANGE INSTRUCTIONS  
If your product is defective, you m ay be able to exchange it at the store from which it was purchased.  
Most stores display a Return Policy. If not, ask the manager or sales associate how many days you have to  
exchange a product with them.After the stores return period has expired, or if the store does not have an  
exchange program, you may exchange the product with Philips if you have your original sales receipt.  
To exchange your product with Philips (per the warranty conditions stated previously), rem em ber :  
If you exchange the product within 90 days of the original purchase, there is no cost to you.  
If you exchange the product more than 90 days after but less than one year after the day of original purchase,  
contact Philips Service Solutions Group (PSSG) at 1-866-323-9916 to determine the preset cost for exchange.  
After 12 months from the day of original purchase, contact PSSG at 1-866-323-9916 for information regarding  
out-of-warranty exchange.  
If you do not have your original sales receipt, or if you have any questions, call PSSG at 1-866-323-9916.  
To obtain a replacem ent product from Philips:  
1. Contact PSSG at 1-866-323-9916 to determine the cost for exchange.  
2. Complete the Exchange Form below.  
3. Pack the product and its accessories in the original box or a suitable alternative.You will receive replacement  
accessories with your replacement product. For packing details, call 1-866-323-9916.  
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into  
an envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope Return  
Documents Enclosed.Place this envelope in the box with the product.  
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight  
prepaid, to:  
Philips Recovery Center  
Rojas 6  
12420 Mercantile Avenue  
El Paso,TX 79928  
ATTENTION: DVD PLAYER EXCHANGE  
A replacement will be sent to you via UPS within 48 business hours of Philipsreceipt of the product.  
EXCHANGE FORM  
Your Address (street address to which replacem ent should be delivered, no P.O. boxes allowed):  
Name:  
Street Address:  
City:  
Phone (day):  
Apt. #:  
State/Province:  
Phone (night):  
Zip Code/Postal Code:  
Exchange Fee:  
+ Sales Tax:  
= Total:  
Method of Paym ent: (Check one. Please, no cash or CODs.)  
_____ Check/Money order  
Check/Money order No.  
Account number  
Expiration date  
__________  
__________  
__________  
__________  
_____ American Express  
_____ Visa  
_____ Novus/Discover  
_____ Mastercard  
___________________________  
___________________________  
___________________________  
___________________________  
Signature: _____________________________________________________________  
Detailed reason for return, use additional paper if necessary: _____________________________________________  
_______________________________________________________________________________________________  
Model Number  
Serial Number  
Rem em ber, the return box should include the following:  
The product,  
Accessories supplied with the product, and  
Com pleted Exchange Form and sales receipt, Paym ent, if applicable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS CO NSUMER ELECTRO NICS CO MPANY  
A Division of Philips Electronics North America Corporation, Knoxville,Tennessee 37914-1810, USA  
DVD702  
CLASS 1  
LASER PRODUCT  
IB8293E001  
The products and services described herein are not  
necessarily available in all countries.  
Due to continuous product improvements, this  
document is subject to change without notice.  
Printed in China  
SL-0109/17-1  
P/N: 3834RS0018W  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pfaff Sewing Machine 350P User Manual
Philips Computer Monitor 107E21 User Manual
Philips DVD Recorder DVDR5350H User Manual
Philips Flat Panel Television WAS6050 05 User Manual
Philips Music Mixer FR960 User Manual
Philips TV Cables SWA2102NB User Manual
Poulan Lawn Mower 159759 User Manual
Poulan Snow Blower 199600 User Manual
Poulan Tiller 159399 User Manual
Precor Fitness Electronics 946l User Manual