Philips DVD Player 1015D User Manual

DVD

SURROUND

DVD/CD PLAYER -

DIGITAL A/V SURROUND RECEIVER

RECEIVER

MX-1015D

MX-1055D

Toll Free Help Line

Ligne d'assistance en service libre

Linea de ayuda telefónica sin cargo

800-531-0039

Download from Www.Somanuals.com. All Manuals Search And Download.

Index and General Information

Canada

English:

English -------------------------------------------------------- 5

This digital apparatus does not exceed the Class

B limits for radio noise emissions from digital

apparatus as set out in the Radio Interference

Regulations of the Canadian Department of

Communications.

Français------------------------------------------------------32

Español ------------------------------------------------------60

Français:

Cet appareil numérique n'emet pas de bruits

radioélectriques dépassant les limites applicables

aux appareils numériques de Class B prescrites

dans le Règlement sur le Brouillage

Radioélectrique édicté par le Ministère des

Communications du Canada.

The set complies with the FCC-Rules, Part 15

and with 21 CFR 1040.1. Operation is subject

to the following two conditions:

1. This device may not cause harmful

interference, and

2. This device must accept any interference

received, including interference that may

cause undesired operation.

This warning label is located on the rearside

and inside this laser product.

INVISIBLE

CAUTION

LASER RADIATION

WHEN OPEN. DO NOT STARE INTO BEAM.

INVISIBLE LASER RADIATIONWHEN OPEN.

DANGER_{AVOID DIRECT EXPOSURE TO BEAM.}

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET

VARO!

ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA

KATSO SATEESEEN.

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.

OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRÅLEN.

VARNING!

DANGER- Invisible laser radiation when open.

AVOID DIRECT EXPOSURE TO BEAM.

CAUTION

Use of controls or adjustments or performance

of procedures other than herein may result in

hazardous radiation exposure or other unsafe

operation.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

ATTENTION

L'utilisation des commandes ou réglages ou le

non-respect des procédures ci-incluses peuvent

se traduire par une exposition dangereuse à

l'irradiation.

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise

ATENCIÓN

El uso de mando o ajustes o la ejecucción de

métodos que no sean los aquí descritos puede

ocasionar peligro de exposición a radiación.

authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

NOTE:

PICTURES SHOWN MAY BE DIFFERENT BETWEEN

COUNTRIES.

Laser

Type

Semiconductor laser GaAIAs

NEVER MAKE OR CHANGE CONNECTIONS WITH THE

POWER SWITCHED ON.

Wave length

Output Power

650nm

7mW

Beam divergence 60 degree

INDEX AND GENERAL INFORMATION

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

11.Only use attachments/accessories speciﬁed by the

manufacturer.

12.

Use only with a cart, stand, tripod, bracket,

or table speciﬁed by the manufacturer or sold

with the apparatus.When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

13.Unplug this apparatus during lightning storms or when

7. Do not block any of the ventilation openings.

Install in accordance with the manufacturers

instructions.

unused for long periods of time.

14.Refer all servicing to qualiﬁed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as if the power-supply cord or

plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, or when the apparatus has been

exposed to rain or moisture, does not operate normally, or

has been dropped.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliﬁers) that produce heat.

9. Do not defeat the safety

purpose of the polarized or

grounding-type plug.A polarized plug

has two blades with one wider than

15. Battery usage CAUTION –To prevent battery leakage

AC Polarized

Plug

which may result in bodily injury or damage to the unit:

the other.A grounding type plug has two blades and a third

grounding prong.The wide blade or the third prong are

provided for your safety.When the provided plug does not

ﬁt into your outlet, consult an electrician for replacement of

the obsolete outlet.

Install all batteries correctly, + and - as marked on the unit.

Do not mix batteries (old and new or carbon and

alkaline, etc.).

Remove batteries when the unit is not used for a long time.

10.Protect the power cord from being walked on or

pinched, particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

EL 6475-E002: 01/3

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Introduction

DVD/CD Operation

Package contents .......................................................6

DVD discs ...................................................................6

Player Zones ...............................................................6

General Information .................................................6

Environmental Information......................................6

Installation ...................................................................6

Cleaning Discs............................................................6

Loading Discs .......................................................... 18

When the DVD is playing ..................................... 18

Active Navigation Menu (DVD) ................... 18–19

Playing a music CD................................................. 19

When the music CD is playing ............................ 19

Active Navigation Menu (music CD) ................. 20

On screen messages .............................................. 21

Disc Setup Menu

Language ............................................................... 22

Subtitle .................................................................. 22

TV Aspect.............................................................. 23

Audio Set ....................................................... 23–24

Digital Out ........................................................... 25

Parental Control ................................................. 25

Panel Keys Lock .................................................. 26

On Screen ............................................................ 26

Program music CD ................................................ 27

Index (DVD) ............................................................ 27

Functional Overview

Front Panel..................................................................7

Remote Control ........................................................8

Connections

Rear Panel ............................................................9–10

Analog Audio Connections .................................. 10

Video Connections ................................................ 11

Digital/Optical Audio Connections .................... 11

System Setup

Specifications ............................................ 28

Setting up the Digital Cinema system................ 12

Speakers Placement ............................................... 12

Speakers Setup ................................................. 12–13

Subwoofer Setup .................................................... 13

Basic Functions

Selecting the source............................................... 14

Adjusting the master volume............................... 14

Adjusting the tone.................................................. 14

Muting the sound.................................................... 14

Dimming the display screen ................................. 14

Selecting output modes - surround

sound & sound effects .................................... 14–15

Tuner

Manual tuning .......................................................... 16

Automatic tuning .................................................... 16

Tuning to a weak FM station ................................ 16

Preset Radio Stations............................................. 16

Clock/Timer

Setting the Clock .................................................... 17

Setting the On/OffTimer...................................... 17

Activating/Deactivating On/OffTimer ............... 17

Setting the SleepTimer ......................................... 17

CONTENTS

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Package contents

Player Zones

This DVD/CD player-AV Surround Receiver is

supplied with the following items :

There are six world zones for the distribution of DVD

Discs. The zone your player is intended for is indicated on

the “Zone Label”. This should be the same as the label on

discs available in your region. If you have any difficulty

playing a disc, make sure the disc is the same zone as your

player.

– a remote control with two AAA batteries

– an AM loop antenna and an FM wire antenna

– an audio and video cable for connection with

your TV

– five speakers and including five speaker cables

– an active subwoofer, including a connection cable

and a power cable

Region 1

Region 2

Region 3

Region 4

Region 5

Region 6

– this instruction booklet

If any item is damaged or missing, contact your retailer or

Philips.

General Information

Anti-copy disc protection

DVD discs

Some DVD discs have anti-copying devices. When playing

these discs through a television will give the highest quality

picture. However, you will not be able to record the disc

through aVCR.

Your Philips DVD Receiver player will play digital video discs

conforming to the universal DVDVideo standard. In

addition to DVDVideo discs, you will be able to play audio

CDs.

Closed Captions

This Receiver is compatible with USA closed captionTVs.

Environmental Information

DVDVideo discs have “Titles” and “Chapters”. There can

be severalTitles on one disc and eachTitle can contain

several Chapters. Titles and Chapters are numbered (e.g.

Title 1,Title 2, etc., and Chapter 1, 2, 3, etc.).

All unnecessary packaging has been omitted.We have tried

to make the packaging easy to separate into three materials:

cardboard (box), polystyrene foam (buffer) and

polyethylene (bags, protective foam sheet).

Usually oneTitle will show the disc publisher and studio

logos. Under anotherTitle is the featue film itself. Other

Titles can contain trailers for other films also available, or

introduction notes from the film, or alternative endings for

the film. There are many possibilities with DigitalVersatile

Discs.

Your system consists of materials which can be recycled

and reused if disassembled by a specialized company. Please

observe the local regulations regarding the disposal of

packaging materials, exhausted batteries and old equipment.

Installation

G Place the player on a flat, hard and stable surface.

G There must be sufficient room in front of the player for the

drawer to open.

G In a cabinet, allow about 10cm (4 inch) of free space all

around the player for adequate ventilation.

G Do not expose your player to extreme temperatures or

humidity.

Chapters within the mainTitle allow you to search quickly

for a specific point on the disc. Many discs have a “Chapter

Menu”, sometimes called “Scene Index” or “Scene Menu”,

that displays the first shot from each Chapter and allows

you to select a shot and play the disc from that point

forward. DVD discs can be PAL or NTSC. This player can

play both types (as long as the zone is correct formatted).

DVD discs allow up to 8 languages and 32 subtitles on a

single disc. You can select and change the language and

subtitle to suit yourself. You can play the whole disc or just

part of it and view it from different angles. However,

availability of these features varies among discs. Check the

disc menu or outer case to see if such features (for

example, subtitles, angles) are available on the disc.

Cleaning Discs

G When a disc becomes dirty, clean it with a cleaning cloth.

Wipe the disc from the center out, in a straight line.

G Do not use solvents such as benzene, thinner, commercially

available cleaners, or anti-static spray intended for analog

discs.

INTRODUCTION

Download from Www.Somanuals.com. All Manuals Search And Download.

Functional Overview

Front Panel

7 8 9 0!

DVD/CD PLAYER DIGITAL AV SURROUND RECEIVER

VOLUME

POWER/STANDBY

SOURCE SELECT

PRESETS FREQUENCY

DIGITAL CINEMA CENTER

CDR

VCR

SURR. MODE FREQUENCY

DVD

TUNER

OPEN/CLOSE

PLAY

PAUSE STOP

% $ #

1 POWER / STANDBY y

to switch between Power On and Standby modes.

# STOP Ç (DVD/CD mode only)

to stop playing the disc.

–

2 Standby LED indicator

to indicate Standby mode.

$ PAUSE Å (DVD/CD mode only)

to freeze the picture and sound.

–

3 SURR. MODE

% PLAY £ (DVD/CD mode only)

to play the disc.

–

to select various surround modes or soundfield

modes.

–

^ PREV S / NEXT T (DVD/CD mode only)

to skip to the previous or next chapter/track.

4 PRESETS (Tuner mode only)

to select preset function.

–

& OPEN/CLOSE 0 (DVD/CD mode only)

to open or close the disc tray.

5 FREQUENCY 4 3 (Tuner mode only)

to tune the radio frequency down or up.

–

* Disc Tray

6 Display screen

to display details for user’s information.

–

7 VCR

–

to select the VCR as the input source.

8 DVD

–

to select the DVD/CD mode.

9 CDR

–

to select the CDR as the input source.

0 TV

–

to select the TV as the input source.

! TUNER

–

to select the Tuner mode. It can also switch between

AM and FM band.

@ VOLUME

to adjust the master volume.Turn clockwise to

increase and counter-clockwise to decrease.

–

FUNCTIONAL OVERVIEW

Download from Www.Somanuals.com. All Manuals Search And Download.

7 SYSTEM MENU

Remote Control

–

in DVD/CD mode, to enter the Disc Setup Menu or

Disc Contents Menu.

–

in all other modes, to enter System Setup : SPEAKER,

CLOCK or TIMER.

∞

≤

8 S / T (DVD/CD mode only)

to skip to the previous or next chapter/track.

9 à / á

MUTE

DISPLAY OPEN/CLOSE

–

VCR

–

in DVD/CD mode, to fast reverse or fast forward the

disc.

CDR

–

in Tuner mode, to tune down or up.

in Tone mode, to adjust the treble/bass tone level.

use during menu and setup navigation.

to select movement direction in Disc Setup /Disc

Contents /Active Navigation menus.

™

)

(

TITLE

SLEEP

TUNER

DVD

SYSTEM

DISC

EXIT

TONE

MODE

0 ( / )

–

in DVD/CD mode, to slow reverse or slow forward

the disc.

in Tuner mode, to select a preset channel number.

to select movement direction in Disc Setup /Disc

Contents /Active Navigation menus.

–

VOL

RDS

! £

–

in DVD/CD mode, to start disc playback.

in Tuner mode, to enter preset programming mode or

to confirm a preset.

FM MODE

DISPLAY

–

to enter or confirm menu and setup navigation.

@ Ç FM Mode

–

in DVD/CD mode, to stop disc playback.

in Tuner mode, to select Mono/Stereo.

# Å

–

to freeze the picture and sound.

$ RDS SEARCH (RDS not available for all versions)

–

in DVD mode, to display the Index Menu.

in Tuner mode, to search RDS station.

% RDS DISPLAY (RDS not available for all versions)

–

in DVD/CD mode, to set the limits for section repeat.

in CD mode, to display the CD Program Menu.

in Tuner mode, to display RDS information.

Notes for remote control:

^ VOL +/-

to increase or decrease the volume.

& TONE

– First, select the source you wish to control by

pressing one of the source select keys on the remote

control (DVD orTUNER, for example).

– Then select the desired function (É, Q , R

for example).

–

to select Bass/Treble adjustment mode.

* MODE

–

to select various surround modes or soundfield

modes.

( DISC MENU (DVD/CD mode only)

to enter or exit Active Navigation Menu.

) EXIT

1 y

–

to switch between Power On and Standby modes.

–

2 VCR

–

to select VCR as the input source.

3 TV

to select TV as the input source.

4 CDR

to select CDR as the input source.

5 TUNER

to select Tuner mode. It can also switch between AM

and FM band.

6 DVD

–

to leave the Disc Setup Menu or System Setup.

¡ TITLE (DVD mode only)

–

™ SLEEP

–

£ Numeric Keys (0-9)

–

to display the Title Menu if present on the disc.

–

to set the sleep (auto-off) timer function.

–

for direct access of preset channels or for use in Disc

Player menus.

≤ MUTE

–

to select the DVD/CD mode.

to mute or unmute the sound.

∞ OPEN/CLOSE (DVD/CD mode only)

–

to open or close the disc tray.

§ DISPLAY

to dim the display screen.

–

FUNCTIONAL OVERVIEW

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Rear Panel

IMPORTANT!

2 AUDIO IN

For connecting analog (Left/Right) audio signals from

external sources to the unit.

VCR – connect toVideo Cassette Recorder AUDIO OUT

jack

TV – connect to Television AUDIO OUT jack

CDR – connect to CD Recorder AUDIO OUT jack

– Before connecting the AC power cord to the wall

outlet, ensure that all other connections have been

made.

– Never make or change any connections with the

power switched on.

– The type plate is located at the rear of the system.

1 ANTENNA

FM Antenna

For FM reception, connect the FM antenna to the FM

jack. Move the antenna in various directions until the

clearest signal is received.

3 VIDEO IN

For connecting to the corresponding VIDEO OUT

jack on a VCR,TV or CDR.

4 DIGITAL OUT (in DVD/CD mode only)

AM Loop Antenna

Digital Coaxial Output RCA Jack

For connecting to external equipment that has a

digital coaxial in jack.

For AM reception, connect the AM loop antenna to

the AM jack. Position the loop antenna to receive the

clearest sound.

Digital Optical Output Socket

For connecting to external equipment that has a

digital optical in jack.

5 S-VIDEO OUT

For connecting to the S-VIDEO IN jack on the TV

using an optional S-Video cable.

G Fully insert the stripped portion of the antenna into the

6 VIDEO OUT

For connecting to external equipment with video in

jacks for viewing or recording.

REC – connect toVCR or other recording device

MON– connect to TV or Monitor

jacks as shown.

Note:

– Position the antenna as far as possible from aTV,VCR or

other radiation source.

CONNECTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

7 AUDIO OUT

0 SUBWOOFER OUT

For connecting analog (Left/Right) signals to external

recording devices such as VCR or Tape Recorder for

recording.

Connect this jack to the AUDIO INPUT jack of the

powered subwoofer.

After completing all the connections, connect the AC

power cord of the player and subwoofer to the wall

outlet. To switch on the subwoofer, rotate the

VOLUME knob at the front panel of subwoofer

clockwise until you hear a click.

8 FRONT SPEAKERS

Connect the left front speaker to the “L” jacks, the

right front speaker to the “R” jacks and center speaker

to the “C” jacks. Connect the colored (marked) wire

to "+" and the black (unmarked) wire to "-".

Notes:

– To prevent damage to circuits, never short-circuit the

positive and negative speaker output jacks.

– Do not connect more than one speaker to any one pair of

+/- speaker jacks.

12 mm

– Do not connect speakers with an impedance lower than

the speakers supplied. Please refer to the SPECIFICATIONS

section of this manual.

9 SURROUND SPEAKERS

Connect the left surround speaker to “SL” jacks and

the right surround speaker to “SR” jacks. Connect the

colored (marked) wire to "+" and the black

(unmarked) wire to "-".

Analog Audio Connections

CONNECTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Connections

Digital/Optical Audio

Connections

Recording from the digital output

The digital output can be used to record digitally a

multichannel surround sound audio signal (Dolby Digital

or DTS) to a CD-R. To convert the digital multichannel

signal into a stereo signal, following settings have to be

activated in the Disc Setup Menu :

– In“Audio Set”, set to 2 audio channel (see page 24)

– In“Digital Out”, set to PCM (see page 25)

Note:

– Digital recording is not possible when the digital source

material is copy-protected.

CONNECTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Positioning the center speaker

Setting up the Digital

Cinema system

The center speaker should be placed in the center between

both front speakers and should always be placed in line

with the television (e.g. underneath or on top of theTV).

The best height for the center speaker is the height of the

listener’s ears (while seated).

You must connect all the speakers and set up the system

properly in order to enjoy the Digital Cinema experience

at home.You will have the feeling of being in the middle of

the action, because sound is coming from everywhere

around you. The subwoofer can enhance the bass

Positioning the surround speakers

performance of your system dramatically. Look for discs

The surround speakers should face each other and be

placed at normal listening ear level or mounted on the wall

at the back of the room.

with the

marks which indicates the material is

encoded for surround sound.

The availability of the various surround sound modes

depends on the number of speakers used and the incoming

sound information available on the disc.

Positioning the Subwoofer

Place the subwoofer on a solid floor where resonance is

unlikely to occur. The subwoofer can be positioned

anywhere in the room because it is not possible to locate

the source of deep tones. Nevertheless, you should not

place it in the center of a room, the bass could be

extremely weakened. Do not place an object on the

subwoofer.

Speakers Placement

General hints for positioning

G Avoid positioning the speakers in a corner or on the floor

as this will boost the bass tones too much. Placing the

speakers behind curtains, furniture, etc., will reduce the

treble response.

Note:

– To avoid magnetic interference with the picture on yourTV,

do not position the front speakers too close to theTV.

G The speakers should be visible from the listening area.

G For the best surround effects, install all speakers. If a center

speaker or subwoofer is not connected, the sound from the

unused channel will be distributed to the connected

speakers in order to reproduce the best possible surround

sound.

G Each room has different acoustic characteristics and the

positioning possibilities often are limited. You can find the

best position for your speakers by experimenting or

referring to the picture below.

Speakers Setup

Before operating your system inTV,VCR or CDR mode,

you will need to set up the speaker configuration and the

distance from the listening position to each speaker. For

speaker setup in DVD mode, refer to “DVD/CD operation

- Audio Set”.

Note:

– It is only necessary to set the parameters once unless you

change the speaker configuration.

Setting the speaker size

1 Press SYSTEM MENU to enter System Setup mode.

2 Press £ to select Speaker Setup.

3 Press £ to select Speaker Size Setup mode.

Positioning the front speakers

The front speakers should be placed to the right and left at

an angle of approximately 45 degrees from the listening

position.

4 Use ( / ) to select a different speaker :

“LR“ – front left/right,“LRG“– large,“SML“– small,

“CEN“ – center,“SUR“ – surround or “SUB“ – subwoofer.

5 Use à / á to adjust the setting.

6 Press £ to save these settings or press EXIT to leave

setup mode.

SYSTEM SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the speaker distance

Subwoofer Setup

1 Press SYSTEM MENU to enter System Setup mode.

2 Press £ to select Speaker Setup.

3 Press ( / ) until Speaker Distance Setup is selected.

Before you operate the subwoofer, complete the

subwoofer connections. Switch on your player and select

the sound source.

Switch on/off the subwoofer

G Rotate the VOLUME knob at the front panel of

subwoofer until you hear a click, clockwise to switch

on and counterclockwise to switch off.

4 Press £ to enter Speaker Distance Setup mode.

G The LED indicator will light up in green when the

subwoofer is switched on.

5 Use ( / ) to select a different speaker.

Volume Adjustment

6 Use à / á to adjust the distance to match as close as

You can adjust the subwoofer to suit the sound level of

your front speakers. Reinforcing the bass sound gives you a

greater sense of atmosphere.

possible to the actual distance.

7 Press £ to save these settings or press EXIT to leave

setup mode.

1 Adjust the VOLUME on the player until the sound from

the front speakers is not distorted. If it is distorted, the

sound from the subwoofer also will be distorted.

Setting each speaker’s relative volume

balance

2 Play your favorite songs.

G Male vocal tunes containing bass sounds are the most

suitable samples for adjusting the subwoofer volume.

IMPORTANT!

Please sit at your usual listening position to correctly

set up the speaker balance to match each other.

3 Adjust the VOLUME on the subwoofer to determine the

loudness of the bass sound from the subwoofer.

1 Press SYSTEM MENU to enter System Setup mode.

2 Press £ to select Speaker Setup.

3 Use ( / ) until Speaker Level Setup is selected.

Phase Selector

Use PHASE SELECTOR located at the rear of the

subwoofer to select the phase polarity. Selecting the

polarity at either 0˚ or 180˚ may determine better bass

reproduction effect in certain listening environments

(depending on the type of front speakers and the position

of the subwoofer). It also may change the expanse and

tightness of the sound, and affect the feeling of the sound

field. Select the setting that provides the sound you prefer

when you are in your normal listening position.

4 Press £ to enter Speaker Level Setup mode.

5 Use ( / ) to select a different speaker channel :

“Lch, Cch, Rch, LSUR, RSUR, SUB”.

6 Use à / á to adjust the level of a particular speaker until

it matches the other speakers.

7 Press £ to save these settings or press EXIT to leave

setup mode.

Repeat the adjustment forVolume and Phase Polarity to

suit your preference. After you have adjusted the

subwoofer to the settings you desire, use the VOLUME

control on the player to adjust the volume of the

subwoofer and the other speakers. You will not need to

adjust the subwoofer settings again, even when you change

the volume level of the player.

SYSTEM SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Functions

Selecting the source

Selecting output modes -

surround sound & sound effects

G Press one of the SOURCE SELECT buttons (VCR, TV,

CDR, TUNER or DVD) to select the input source.

G The selected source will be displayed.

The number of output modes varies according to the

system setup and the input source. A list of all output

modes is shown below.

Adjusting the master volume

IMPORTANT!

The master volume adjusts all speaker channels at the same

time.

For proper surround sound, make sure you have

followed the Connections and System Setup

procedure fully.

G Rotate the VOLUME knob on the front panel (or press

VOL +/- on the remote control).

G Press SURR. MODE (or MODE on the remote control)

to select the available output modes.

Dolby Digital Surround

The Dolby Digital Surround system requires connection of

all five speakers (front left, center, front right, surround right,

surround left) for correct surround sound reproduction.

This 5.1 channel digital surround format allows for five

individual full-range (20Hz - 20kHz) channels plus an LFE

(Low Frequency Effects) channel for the low-range

(20Hz - 120kHz) effects. It creates a realistic sound similar

to theater and cinema. A large number of DVD discs have

recorded in Dolby Digital Surround.

Adjusting the tone

The tone controls only affect the front left and right

speakers.

1 Press TONE once to select Bass adjustment.

2 Press TONE again to selectTreble adjustment.

Dolby Pro Logic Surround

The Dolby Pro Logic Surround system is a specially

encoded two channels analog format that will produce

sound through four speaker channels (front left, center,

front right, monaural surround) when a Dolby Pro Logic

Decoder is used. It is also compatible with stereo systems

but the user will only have two channels (Front Left &

Right) of sound.

G While in Bass orTreble adjustment mode, press à / á to

adjust the selected Bass orTreble level.

3 Press TONE for the third time to exit.

Note:

– If no button is pressed within a few seconds, the player will

exit the tone mode automatically.

Muting the Sound

Dolby 3 Stereo

1 Press MUTE to mute the speaker output, the “MUTE”

Dolby 3 Stereo produces sound through three speaker

channels (front left, center, front right) from a two channels

analog signal. It is not a surround format, so it does not

require surround speakers.

icon will appear on the display.

2 To restore the volume, press MUTE again.

Dimming the display screen

1 Press DISPLAY will dim the display by a third.

Stereo

All sound is reproduced and played through the front left

and right speakers. This enables standard stereo

reproduction.

2 Press DISPLAY again will dim the display by another third.

3 Press DISPLAY the third time will return the display to

the original brightness.

BASIC FUNCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Soundfield Effects

The digital Soundfield Effects can recreate the effects of

sounds reflected from walls or ceilings to obtain the sound

presence of real environments.

STADIUM

This mode recreates a large stadium effect using very long

reverberation times.

STAGE

This effect recreates a stage environment, emphasizing

sound from the front speakers.

HALL

The surround effect recreates a hall using lots of reflections.

Suitable for orchestral music such as classical and opera.

DISCO

This surround effect generates a feeling of being in a disco

or club. It is suitable for all types of music that are played in

discos.

LIVE

This soundfield effect is suitable for all types of music.

BASIC FUNCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner

Manual tuning

1 Press TUNER to select tuner mode.

Preset Radio Stations

When a preset station is selected, the preset number will

appear shortly and the display will show the waveband and

frequency.

Storing Preset Radio Stations

You can store up to 20 stations in the FM waveband and 20

stations in the AM waveband in the memory.

G After two seconds, the display will show the current

waveband and frequency.

1 In tuner mode, press TUNER to switch between FM and

AM waveband.

2 To switch between FM and AM waveband, press TUNER

2 Press FREQUENCY 4 or 3 to tune in the desired

station.

again.

3 Press FREQUENCY 4 or 3 (or à / á on the remote

control) repeatedly to change the frequency. The frequency

changes in 100kHz steps in FM and 10kHz steps in AM

waveband.

3 Press and hold PRESETS until the “PRESET” icon flashes.

4 Press ( / ) (or numeric keys 0-9 on the remote control)

to select the desired preset channel number to store.

5 Press PRESETS again to store the radio station.

Automatic tuning

1 Press TUNER to select tuner mode.

2 To switch between FM and AM waveband, press TUNER

again.

3 Press and hold FREQUENCY 4 or 3 for more than one

second to activate auto tuning mode.

G Repeat steps 2–5 to store other preset radio stations.

G When a station is reached, auto tuning stops.

G Repeat steps 2–3 to search for other radio stations.

Selecting Preset Radio Stations

1 In tuner mode, press TUNER to switch between FM and

AM waveband.

Tuning to a weak FM station

2 Press PRESETS, then FREQUENCY 4 or 3 (or ( / )

on the remote control) to select the desired preset station.

G You can also use the remote control’s numeric keys.

1 Press FREQUENCY 4 or 3 repeatedly to tune in the

weak FM station manually.

2 Press FM MODE (Ç) to switch to monaural mode. This

should reduce the noise and make the station easier to

hear.

TUNER

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timer

IMPORTANT!

When in DVD/CD mode, it is not possible to operate

clock or timer function.

Setting the Clock

1 Press SYSTEM MENU to enter System Setup mode.

7 Press £ to confirm and return to the last selected source.

G Repeat steps 1-5 again to set the OffTime.

2 Press ( / ) to select the Clock Setup mode and press

£ to confirm.

Note:

– When the “on time” is reached, the player will switch on to

the last selected source.

3 Press à / á to change between 12 and 24 hour mode.

Activating/Deactivating

On/Off Timer

1 Press SYSTEM MENU to enter System Setup mode.

4 Press £ to enter clock adjustment mode.

2 Press ( / ) to select theTimer Setup mode and press

G The clock digits for the hours flash.

£ to confirm.

3 Press £ twice and press à / á to select

“SET ON” or “SET OFF” mode.

4 Press £ to confirm the setting and return to the last

selected source.

5 Press à / á to set the hour.

6 Press ( / ) to change the minute field.

G The clock digits for the minutes flash.

Setting the Sleep Timer

This feature allows you to select a preset amount of time

after which the player will switch to standby mode

automatically.

7 Press à / á to set the minute.

G Press SLEEP repeatedly to select a preset amount of time.

8 Press £ to confirm the setting and return to normal

G The selections are as follows (time in minutes):

mode.

90™ 60™ 30™ 15™ OFF™ 90…

Setting the On/Off Timer

1 Press SYSTEM MENU to enter System Setup mode.

2 Press ( / ) to select theTimer Setup mode and press

G When the SleepTimer is activated, the “SLEEP” icon will

appear on the display.

£ to confirm.

Checking the remaining SleepTime

When the SleepTimer is switched on, you can check the

remaining time before the player switches to standby

mode.

3 Press ( / ) to select set on timer or set off timer :

“ON TIME” or “OFF TIME”.

G Press SLEEP once.

G The remaining time will be displayed.

Cancelling the SleepTimer

To switch off the SleepTimer after it has been activated.

G Press SLEEP repeatedly until “OFF” is displayed.

4 Press £ to enter set time mode.

5 Set time (refer to point 5-7 of “Setting the Clock”) and

press £ to confirm the setting.

6 Press à / á to select activating or deactivating the timer :

“SET ON” or “SET OFF”.

CLOCK/TIMER

Download from Www.Somanuals.com. All Manuals Search And Download.

⁄

1 =

⁄

2 =

⁄

3 =

⁄

4 =

⁄1 ...

DVD/CD Operation

Stop/Resume Stop

Loading Discs

1 Press OPEN/CLOSE 0 to open the disc tray.

2 Load your chosen disc in the tray, label side up.

1 While playing a disc, press Ç once will go into “Resume

Stop” mode. The disc can resume playback from the point

at which it stopped when you press £ .

3 Press OPEN/CLOSE 0 again to close the tray.

GThere will be a short delay while the player identifies the

disc and reads the menu from the disc.

G Some discs will start playing automatically, others will display

the Disc Contents Menu. If the menu is presented,

use à / á or ( / ) to select a play option, then press

£ to confirm the selection.

G In resume stop mode, you can display the Setup Menu.

2 While resume stop mode, pressÇ again to enter stop

mode. The disc will start playback from the beginning when

you press £ .

Active Navigation Menu (DVD)

A number of operations can be done with the Active

Navigation Menu without interrupting disc playback.

When the DVD is playing

Skip

G Press S or T to skip backward or forward by a

Chapter. Each press will take the disc to the beginning of

the previous or next chapter.

1 Press DISC MENU.

Fast Search

G The Active Navigation Menu will be displayed across the

top of theTV screen.

1 Press à or á to reverse or fast forward. There are four

speeds; each press will increase the speed.

GThe sound will be muted.

2 Press ( or ) to move through the Active Navigation Menu.

G Press T to go directly to the second part of the Active

Navigation Menu.

61 = 62 = 63 = 64 = 61 ...

51 = 52 = 53 = 54 = 51 ...

3 Press DISC MENU or EXIT to exit.

2 To resume normal play, press £.

Title

Slow Motion

G Press à or á to select a title from a multi-

title DVD disc and press £ to confirm the

selection.

1 Press ( or ) to play slow motion picture backward or

forward. There are four speeds; each press will reduce the

speed.

G The selected title will be displayed.

GThe sound will be muted.

!1 = !2 = !3 = !4 = !1 ...

Chapter

G Press à or á to select a chapter from a

multi-chapter DVD disc and press £ to

confirm the selection.

2 To resume normal play, press £.

G The selected chapter will be displayed.

Disc Contents Menu

1 While playing a disc, press SYSTEM MENU.

G The “Disc Contents Menu” will be displayed.

2 Press à / á or ( / ) to select a desired feature and

press £ to confirm the selection.

Time Search

This function enables you to select and play the

disc from any point.

1 Select TIME SEARCH in the Active Navigation Menu.

G The figure appears on the screen is the elapsed time for

the current playing title.

2 Use the numeric keys to enter the time, then press

£ to confirm.

Pause

1 Press Åto temporarily stop playing the disc.

G The picture freezes and the sound will be muted.

G Press Åagain will show the next frame of picture.

G The disc will play from the time you selected.

G The associated chapter and elapsed playing time will be

displayed.

2 To resume normal play, press £.

DVD/CD OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Language/Sound

Playing a music CD

1 Load a music CD in the disc tray.

2 Press £ to start playback.

G You can use the numeric keys on the remote control to

directly select a desired track, then press £ to confirm.

There could be alternative language

tracks or 2 channel and 5.1 channel

audio available on a disc. All discs are different in this

respect.

G Press à or á to cycle through the sound tracks available

on the disc, then press £ to confirm.

When the music CD is playing

Subtitle

G Press à or á to select the available subtitle

languages or to turn off the subtitle, then press

£ to confirm.

Skip

G Press S or T to skip backward or forward. Each

press will take the disc to the beginning of the previous or

next track.

G If the RANDOM mode is switched on, skip will jump a

RANDOM number of tracks.

Angle

If the disc contains sequences recorded from

different camera angles, this allows you to view

the picture from different angles.

Fast Search

G Press à or á to select an angle.

1 Press à or á to reverse or fast forward the disc. There

are three speeds; each press will increase the speed until

the maximum speed is reached.

G After a while, playback changes to the selected angle.

OSD (on screen display)

If the OSD is switched on, it will serve as an

2 Press £ to revert to normal speed playback.

additional display for messages on the top

corner of the screen, e.g. STOP, PLAY, which will appear

momentarily when you press a remote control button.

Pause

1 Press Åto temporarily stop playing the disc.

GThe sound will be muted.

2 To resume normal play, pressÅagain or £ .

G Press £ repeatedly to set On Screen Display to “ON” or

“OFF”.

Repeat A-B

Repeat A-B allows a passage to play repeatedly.

1 Press £ at the start of the desired passage.

2 Press £ again at the end of the passage.

G The passage will now repeat continuously.

3 To resume normal play, press £ again.

G You can also press RDS DISPLAY on the remote

control to direct access to Repeat A-B mode.

Zoom

The zoom function allows you to enlarge or

reduce the video image.

G Press £ repeatedly to select the zoom factor : 1.0x, 2.0x

and 0.5x.

G The picture will change accordingly.

_{Download from Www.Somanuals.com. All Manuals Search And Download.}DVD/CD OPERATION

Random

All the tracks will play in random order.

Active Navigation Menu

(music CD)

G Press £ repeatedly to select random “ON” or

A number of operations can be done with the Active

Navigation Menu without interrupting disc playback.

“OFF”.

OSD (on screen display)

If the OSD is switched on, it will serve as an

additional display for messages on the top

corner of the screen, e.g. STOP, PLAY, which will appear

momentarily when you press a remote control button.

1 Press DISC MENU.

G The Active Navigation Menu will be displayed across the

top of theTV screen.

G Press £ repeatedly to select On Screen Display “ON” or

“OFF”.

2 Press ( or ) to move through the Active Navigation Menu.

3 Press DISC MENU or EXIT to exit.

Track

G Press à or á to select a track and press

£ to confirm the selection.

G The track number and elapsed playing time of the

current track will appear on the display.

Time Search

This function enables you to select and play the

disc from any point.

G Use the numeric keys on the remote control to enter

the time, then press £ to confirm.

G The disc will play from the time you entered.

Repeat A-B

Repeat A-B allows a passage to play repeatedly.

1 Press £ at the start of the required passage.

2 Press £ again at the end of the passage.

G The passage will now repeat continuously.

3 To resume normal play, press £ again.

Repeat

This function is to repeat playback a track or

the whole disc.

G Press £ repeatedly to select “1” or “ALL”.

G If “1” is selected, the current track will play repeatedly.

G If “ALL” is selected, the whole disc will play repeatedly.

DVD/CD OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

SLOW FWD (

SLOW BWD (

) ...... Slow forward speed 1 (for DVD

up to speed 4).

On-screen messages

During play, various messages will be shown on the screen

for a few seconds to confirm that a function has been

selected. You can switch on or off these messages in the

“On Screen” setup mode of the System Setup menu.

) .... Slow backward speed 1 (for DVD

up to speed 4).

MUTE ( ) ........................ The sound is muted.

UNMUTE ( ) ................. Sound mute is cancelled.

SKIPPING BAD DISC AREA …There is a damaged

section of the disc that the player

The possible messages may appear are listed below :

PLEASEWAIT.................... The system is initializing.

READING ............................ Reading the disc.

OPEN ( é ) ...................... The tray is about to open.

CLOSE ( ) ...................... The tray is about to close.

DVD ................................. DVD disc is loaded.

MUSIC CD ..................... Music CD is loaded.

NOVALID DISC.............. Wrong disc format or damaged

disc cannot play; disc is loaded

can skip over.

TRACK: 1 ............................. Track selection with a number key

(Music CD).

SKIP NEXT (

) ......... Skip to the start of the next track

(Music CD).

SKIP PREV (

)........... Skip to the start of the previous

track (Music CD).

upside down or no disc is in the

STAND BY .......................... Entering standby mode.

POWER ON ...................... Switched on from stand by.

BUTTON: 2......................... Indicates a menu selection using

the number keys.

disc tray.

INVALID REGION DISC…The disc cannot play because

the regional code is different than

the player.

PARENTAL LEVELTOO LOWTO PLAY

.................................................... The parental control has been set

and the disc cannot play.

PLAY (É)............................ Start playback.

PAUSE (Å) ........................ Pause the disc.

STEP FWD (

)........... One frame forward in pause

mode.

STEP BWD (

) .......... One frame backward in pause

mode.

CONTINUE (É)........... Continue playing after pause.

RESUME STOP (

)…Stop the disc but allow the disc

to be resumed from the same

place later.

RESUME (

)........... Playback is resumed.

STOP (Ç) ........................... The disc is completely stopped.

) ........................................ This function is not available.

(

NEXT CHAPTER (

)…Playback from beginning of next

chapter.

PREV CHAPTER (

) …Playback from beginning of

previous chapter.

FAST FWD (

FAST BWD (

) .......... Fast forward speed 1 (for DVD up

to speed 4, for CD up to speed 3).

) ......... Fast backward speed 1 (for DVD

up to speed 4, for CD up to speed

3).

_{Download from Www.Somanuals.com. All Manuals Search And Download.}DVD/CD OPERATION

Disc Setup Menu

The selections from the Disc Setup Menu are the preferred

options that will be chosen if they are available on a disc. If

the disc inserted does not have the preferred option, then

the disc’s own preference will be used.

1 Press SYSTEM MENU.

G The Disc Setup Menu will be displayed across the top of

theTV screen.

2 Press à / á or ( / ) to move through the Disc Setup

Menu.

3 Press £ to confirm the selection.

IMPORTANT!

To access the Disc Setup Menu, playback must be

stopped.

Language

Example showing how to change the audio language from ENGLISH to FRENCH

[ Language ]

[ Audio ]

X 2

[ Return ]

[ Francais ]

X 4

Subtitle

Example showing how to turn off the subtitle

[ OFF ]

[ Subtitle ]

X 1

X 1 [Return]

DVD/CD OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Aspect

[L-Box] means "Letter Box". The picture will be displayed as

bottom of the screen. (For disc which support letter box feature)

with black bars at the top and

[P-Scan] means "Pan and Scan". The picture fills the whole screen however some parts to left and right

may not be visible. The picture will automatically Pan and Scan to left and right to center the most

important part of the picture. Not all discs support Pan and Scan, so the Letter Box display may remain

even though [P-Scan] is selected.

Example shows setting of Letter Box display on a normalTV.

[TV Aspect ]

X 1

[ Return ]

[ L-Box ]

X 1

Audio Set

Example shows setting of Dynamic Range Compression (DRC) to night time listening.

X 3

[ DRC ]

[ Audio Set ]

[ Exit ]

X 1

X 4

_{Download from Www.Somanuals.com. All Manuals Search And Download.}DVD/CD OPERATION

Audio Set

Example shows setting of 2 audio channel to 5.1 audio channel (only available on 5.1 Channel models).

Center

[ Audio Set ]

Speaker

[ Exit ]

Exit

Subwoofer

Rear

Speakers

DVD/CD OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Set up the Digital Audio output for a 5.1 Receiver/Decoder. This menu enables you to set the type

of 5.1 output according to your Decoder/Amplifier. The form of each type of Data (Dolby Digital, MPEG

or DTS) can be set as a Bitstream or PCM format to suit your Dolby & DTS decoders.

Digital Out

[ Digital out ]

The player is delivered without a password. When you set

the parental level for the first time, you are invited to enter

Parental Control

Some DVD discs have a parental level assigned to the disc.

The range of parental controls is from 1 to 8. The meaning

of the levels 1 to 8 varies depending upon the country and

the type of content on the disc.

your own password (e.g. 1, 2, 3, 4). This becomes the

password for the player. You must know this password

in order to change it. Some films do not have

parental control, the disc will play regardless of

the player setting.

The player can be set in a similar way. If the player’s

parental level is set to 8, it will play all discs. If the player’s

parental level is set below 8, only discs with a lower or

equal level will play. For example, if the player is set to 5,

only discs with parental control ratings of 5, 4, 3, 2 & 1 will

play. To play a higher rated disc, you must change the

player’s rating to a higher number.

Parental Lock password erase

1 Press and hold FREQUENCY 3 on the front panel

while unplug and plug-in the power cord.

G “PAS ERASE” will be displayed.

2 Wait until “PASSWORD ERASE OK” appear on theTV

display, the player will then switch to standby mode 20

seconds later.

Alternative scenes with a lower rating might be included.

The player plays the highest rated scene that the parental

setting allows. For example, consider a disc that generally is

suitable for most audiences, and it is rated as level 2 for the

most part. However, in the middle, there are also scenes

rated at 5 (not suitable for children).

Example showing how to set parental level to 3.

[ Level ]

Parental Control

< 3 >

[ Parental ]

X 4

[4 digits password ]

[ Return ]

_{Download from Www.Somanuals.com. All Manuals Search And Download.}DVD/CD OPERATION

A second method of parental control is also available in the PANEL KEYS option.

Set panel keys to OFF and the player can only be operated by the remote control.

Panel Keys Lock

[ Parental ]

[ Panel keys ]

[ Off ]

X 3

[ Exit ]

On Screen

If the On Screen Display is on, various icons and messages will show on the screen for a few seconds

to confirm that a function has been selected.

Example showing how to turn off the On Screen Display.

[ Off ]

[ On Screen ]

[ Return ]

X 1

DVD/CD OPERATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Program music CD

To display the CD program menu, the player must be in

CD mode and playback must be stopped.

2 Press RDS DISPLAY.

G CD Program Menu will appear.

3 Press à / á to select a desired track.

1 Insert a music CD and close the disc tray.

G The player will go into CD mode when it identifies the

disc.

4 Press ) to store the track in the program.

G Repeat steps 3–4 to store other tracks.

5 Press £ to save the program.

Example showing how to program favorite tracks from a music CD.

Program Music CD

RDS

SAVE

DISPLAY

Index (DVD)

To display the DVD Index Menu, DVD must be playing.

3 Press à / á to display the information of the selected

index marker.

4 Press £ to confirm the selection.

1 While playing a disc, press RDS SEARCH.

G The film will pause and the Index Menu will appear.

2 Press ( / ) to select the desired index marker.

Example showing how to set an Index marker.

Index DVD

RDS

(INDEX)

X 2

Example showing how to play from an indexed point.

RDS

(INDEX)

X 2

_{Download from Www.Somanuals.com. All Manuals Search And Download.}DVD/CD OPERATION

Specifications

AMPLIFIER SECTION

SPEAKERS

Power Output

Front Speakers

- Output power, stereo mode FTC (40 Hz – 20 kHz) ..............2 x 60 W

- Output power, surround mode (1 kHz) ................ 70 W RMS / channel

Total Harmonic Distortion ..............................0.7% at rated power (1 kHz)

Frequency Response .....................................................20 Hz – 20 kHz / 1 dB

Signal-to-Noise Ratio ....................................................................... > 65dB (CCIR)

Input Sensitivity..................................................................................................... 460 mV

Tone Control .......................................................................................................... 12 dB

System ........................................................................................................2-way shielded

Impedance........................................................................................................................ 8 Ω

Speaker drivers........................................................................ 3” full range, 1” piezo

Dimensions (w x h x d) ..................................... 94 mm x 155 mm x 88 mm

Weight......................................................................................................................... 0.45 kg

Center Speaker

System ........................................................................................................2-way shielded

Impedance........................................................................................................................ 8 Ω

Speaker drivers............................................................... 2 x 3” full range, 1” piezo

Dimensions (w x h x d) ..................................... 250 mm x 94 mm x 88 mm

Weight......................................................................................................................... 0.92 kg

TUNER SECTION

Tuning Range ....................................... FM 87.5 – 108 MHz (100 kHz steps)

......................................................................... AM 530 – 1720 kHz (10 kHz steps)

26 dB Quieting Sensitivity .......................................................................... FM 20 dB

26 dB Quieting Sensitivity ...............................................................AM 3162uV/m

Image Rejection Ratio................................................................................... FM 25 dB

.................................................................................................................................. AM 28 dB

IF Rejection Ratio ............................................................................................ FM 60 dB

.................................................................................................................................. AM 38 dB

Signal-to-Noise Ratio .................................................................................... FM 60 dB

.................................................................................................................................. AM 40 dB

Selectivity ............................................................................................................. FM 20 dB

AM Suppression Ratio ................................................................................. FM 30 dB

Harmonic Distortion ............................................................................FM Mono 3%

..................................................................................................................................Stereo 3%

........................................................................................................................................ AM 5%

Frequency Response ................................................... FM 63Hz-10kHz / 6 dB

Stereo Separation .........................................................................FM 26 dB (1 kHz)

Stereo threshold.............................................................................................. FM 28 dB

Surround Speakers

System .......................................................................................................... 2-way satelite

Impedance........................................................................................................................ 8 Ω

Speaker drivers........................................................................ 3” full range, 1” piezo

Dimensions (w x h x d) ..................................... 94 mm x 155 mm x 88 mm

Weight......................................................................................................................... 0.45 kg

SUBWOOFER (MX-1015D)

Subwoofer (not magnetically shielded design)............................................ 6.5”

Output power .................................................................................. 50 W (4 Ω, DIN)

THD .............................................................................................................. 10% at 55 Hz

Reproduction frequency response.......................................... 45 Hz – 150 Hz

Phase switch............................................................................................................0 , 180

Input sensitivity (Subwoofer In) ..........................................................460 mVrms

AC power................................................................................................... 120V / 60 Hz

Power Consumption ........................................... 38.5 W (at 1/8 Rated Power)

Dimensions (w x h x d) ................................200 mm x 310 mm x 370 mm

Weight............................................................................................................................... 7 kg

DVD SECTION

LaserType ................................................................................................ Semiconductor

Disc Diameter.............................................................................................. 12cm / 8cm

PlayingTime (12cm)

Single Layer ........................................................ 2.12h

Dual Layer .......................................................... 4.01h

Two Sides, Single Layer ............................... 4.26h

Two Sides, Dual Layer.................................. 8.02h

SUBWOOFER (MX-1055D)

Subwoofer (not magnetically shielded design).....................................................

..........................................................................................6.5” with wOOx technology

Output power ............................................................................... 100 W (4 Ω, DIN)

THD .............................................................................................................. 10% at 55 Hz

Reproduction frequency response.......................................... 30 Hz – 110 Hz

Video Decoding.................................................................................................. MPEG-2

Video DAC ................................................................................................................10 Bits

Signal System ............................................................................................... PAL / NTSC

Video Format ..................................................................................................... 4:3 / 16:9

Video S/N...........................................................................................56 dB (minimum)

CompositeVideo Output ........................................................ 1.0Vp-p, 75 ohms

S-Video Output ..................................................................... Y - 1.0Vp-p, 75 ohms

...................................................................................................C - 0.286Vp-p, 75 ohms

Audio DAC........................................................................................... 24 Bits / 96 kHz

Frequency Response ................................................. 4 Hz – 20 kHz (44.1 kHz)

................................................................................................... 4 Hz – 22 kHz (48 kHz)

................................................................................................... 4 Hz – 44 kHz (96 kHz)

Digital Output .................................................................. SPDIF Coaxial & Optical

Phase switch............................................................................................................0 , 180

Input sensitivity (Subwoofer In) ..........................................................200 mVrms

AC power................................................................................................... 120V / 60 Hz

Power Consumption ............................................... 70 W (at 1/8 Rated Power)

Dimensions (w x h x d) ................................200 mm x 310 mm x 370 mm

Weight......................................................................................................................... 8.24 kg

MISCELLANEOUS

Power Supply Rating............................................................................. 120V / 60 Hz

Power Consumption (DFR1500, DFR1600) ......................................... 216 W

Dimensions (w x h x d) ................................435 mm x 140 mm x 430 mm

Weight .............................................................................................................................13 kg

IR REMOTE CONTROL

Effective Range.................................................................................................> 8 Meter

Number of Keys .............................................................................................................. 39

Battery (1.5V) .....................................................................................................AAA x 2

Specifications subject to change without prior notice

SPECIFICATIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

AUDIO SYSTEM

OneYear Free Labor

OneYear Free Service on Parts

This product must be carried in for repair.

WHO IS COVERED?

You must have proof of purchase to receive warranty service.A sales

receipt or other document showing that you purchased the product

is considered proof of purchase.

BEFORE REQUESTING SERVICE...

Please check your owner’s manual before requesting service.

Adjustments of the controls discussed there may save you a service

call.

WHAT IS COVERED?

TO GET WARRANTY SERVICE IN U.S.A.,

Warranty coverage begins the day you buy your product. For one year

thereafter, all parts will be repaired or replaced, and labor is free.

After one year from the day of purchase, you pay for the replacement

or repair of all parts, and for all labor charges.

All parts, including repaired and replaced parts, are covered only for

the original warranty period.When the warranty on the product

expires, the warranty on all replaced and repaired parts also expires.

PUERTO RICO OR U.S. VIRGIN ISLANDS...

Take the product to a Philips factory service center (see enclosed

list) or authorized service center for repair.When the product has

been repaired, you must pick up the unit at the center. Centers may

keep defective parts.

(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties,

including implied warranties of merchantability and fitness for a

particular purpose, are limited in duration to the duration of this

express warranty. But, because some states do not allow limitations

on how long an implied warranty may last, this limitation may not

apply to you.)

WHAT IS EXCLUDED?

Your warranty does not cover:

•

labor charges for installation or setup of the product, adjustment

of customer controls on the product, and installation or repair of

antenna systems outside of the product.

TO GET WARRANTY SERVICE IN CANADA...

Please contact Philips at:

•

product repair and/or part replacement because of misuse,

accident, unauthorized repair or other cause not within the

control of Philips Consumer Electronics Company.

1-800-661-6162 (French Speaking)

1-800-363 7278 (English Speaking)

•

reception problems caused by signal conditions or cable or

antenna systems outside the unit.

a product that requires modification or adaptation to enable it to

operate in any country other than the country for which it was

designed, manufactured, approved and/or authorized, or repair of

products damaged by these modifications.

(In Canada, this warranty is given in lieu of all other warranties. No

other warranties are expressed or implied, including any implied

warranties of merchantability or fitness for a particular purpose.

Philips is not liable under any circumstances for any direct, indirect,

special, incidental or consequential damages, howsoever incurred,

even if notified of the possibility of such damages.)

•

incidental or consequential damages resulting from the product.

(Some states do not allow the exclusion of incidental or

consequential damages, so the above exclusion may not apply to

you.This includes, but is not limited to, prerecorded material,

whether copyrighted or not copyrighted.)

REMEMBER...

Please record the model and serial numbers found on the product

below.Also, please fill out and mail your warranty registration card

promptly. It will be easier for us to notify you if necessary.

•

a product that is used for commercial or institutional purposes.

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where the product is

officially distributed by Philips Consumer Electronics Company. In

countries where Philips Consumer Electronics Company does not

distribute the product, the local Philips service organization will

attempt to provide service (although there may be a delay if the

appropriate spare parts and technical manual(s) are not readily

available).

MODEL # ________________________________________

SERIAL # ________________________________________

MAKE SUREYOU KEEP...

Please keep your sales receipt or other document showing proof of

purchase.Attach it to this owner’s manual and keep both nearby.Also

keep the original box and packing material in case you need to return

your product.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, USA, (903) 242-4800

EL4965E006 / MAC 4110 / 12-98

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Iron GC2620 User Manual
Philips Speaker System HTS3568DW User Manual
Philips Universal Remote SBC RU930 User Manual
Pioneer Car Video System X EM21V User Manual
Pitco Frialator Cooktop RTE14 User Manual
Planar Planer LAN Command Potocol User Manual
Polycom Telephone SE 225 User Manual
Polycom Webcam QDX 6000 User Manual
Power Acoustik Stereo Equalizer PEQ 50P User Manual
Powermate Portable Generator PM0463302 User Manual