e-Manual
Philips LCD Monitor Electronic User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/index.htm2006-12-06 ¤U¤È 05:44:38
Safety and Troubleshooting Information
extreme cold.
●
In order to maintain the best performance of your monitor and use it for a longer lifetime,
please use the monitor in a location that falls within the following temperature and
humidity ranges.
❍
Temperature: 0-35°C 32-95°F
Humidity: 20-80% RH
❍
Service:
●
●
The casing cover should be opened only by qualified service personnel.
If there is any need for any document for repair or integration, please contact with your
local service center. (please refer to the chapter of "Consumer Information Center")
For transportation information, please refer to "Physical Specifications".
Do not leave your monitor in a car/trunk under direct sun light.
●
●
Consult a service technician if the monitor does not operate normally, or you are
not sure what procedure to take when the operating instructions given in this
manual have been followed.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/safety.htm (2 of 2)2006-12-06 ¤U¤È 05:44:45
FAQs (Frequently Asked Questions)
FAQs (Frequently Asked Questions)
General FAQs
Q: When I install my monitor what should I do if the screen shows 'Cannot display this video
mode'?
A: Recommended video mode for Philips 19": 1280x1024 @60Hz.
1. Unplug all cables, then connect your PC to the monitor that you used
previously.
2. In the Windows Start Menu, select Settings/Control Panel. In the Control Panel
Window, select the Display icon. Inside the Display Control Panel, select the
'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the
slidebar to 1280x1024 pixels (19").
3. Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.
4. Restart your computer and repeat step 2 and 3 to verify that your PC is set at
1280x1024@60Hz (19").
5. Shut down your computer, disconnect your old monitor and reconnect your
Philips LCD monitor.
6. Turn on your monitor and then turn on your PC.
Q: What does 'refresh rate' mean in connection with an LCD monitor?
A: The refresh rate is of much less relevance for LCD monitors. LCD monitors display
a stable, flicker-free image at 60Hz. There is no visible difference between 75Hz and
60Hz.
Q: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .
icm)?
A: These are the driver files for your monitor. Follow the instructions in your user
manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .
icm files) or a driver disk when you first install your monitor. Follow the instructions to
insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .
icm files) will be installed automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (1 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
Q: How do I adjust the resolution?
A: Your video card/graphic driver and monitor together determine the available
resolutions. You can select the desired resolution under Windows® Control Panel
with the "Display properties".
Q: What if I get lost when I am making monitor adjustments?
A: Simply press the OK button, then select 'Reset' to recall all of the original factory
settings.
Q: What is the Auto function?
A: The AUTO adjustment key restores the optimal screen position, phase and clock
settings by pressing of a single button – without the need to navigate through OSD
(On Screen Display) menus and control keys.
Note: Auto function is available in selected models only.
Q: My Monitor has no power (Power LED does not light up). What should I do?
A: Make sure the AC power cord is connected between the monitor and AC outlet,
and click a key on keyboard/mouse to wake up the PC.
Q: Will the LCD monitor accept an interlaced signal under PC models?
A: No. If an Interlace signal is used, the screen displays both odd and even horizontal
scanning lines at the same time, thus distorting the picture.
Q: What does the Refresh Rate mean for LCD?
A: Unlike CRT display technology, in which the speed of the electron beam is swept
from the top to the bottom of the screen determines flicker, an active matrix display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (2 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
uses an active element (TFT) to control each individual pixel and the refresh rate is
therefore not really applicable to LCD technology.
Q: Will the LCD screen be resistant to scratches?
A: A protective coating is applied to the surface of the LCD, which is durable to a
certain extent (approximately up to the hardness of a 2H pencil). In general, it is
recommended that the panel surface is not subject to any excessive shocks or
scratches.
Q: How should I clean the LCD surface?
A: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use
isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone,
hexane, etc.
Q:Can I change the color setting of my monitor?
A:Yes, you can change your color setting through OSD control as the following
procedures,
1. Press "OK" to show the OSD (On Screen Display) menu
2. Press "Down Arrow" to select the option "color" then press "OK" to enter color
setting, there are five settings as below.
a. 6500K; this setting features the panel closed to red-white color tone.
b. 9300K; this setting features the panel closed to blue-white color tone.
c. Original; this setting load the default panel setting in terms of color
tone. (Note: different panel maker may feature a different color
temperature*)
d. SRGB; this is a standard setting for ensuring correct exchange of
colors between different device (e.g. digital cameras, monitors, printers,
scanners, etc.)
e. User Define; the user can choose his/her preference color setting by
adjusting red, green, blue color.
*A measurement of the color of light radiated by an object while it is being heated. This measurement
is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K
are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (3 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
Q: Can the Philips LCD Monitor be mounted on the wall?
A: Yes. Philips LCD monitors have this optional feature. Four standard VESA mount
holes on the rear cover allows the user to mount the Philips monitor on most of the
VESA standard arms or accessories. We recommend to contact your Philips sales
representative for more information.
Screen Adjustments
Q: What is the FPadjust program on the CD-ROM?
A: The FPadjust program generates alignment patterns that help you adjust monitor
settings such as Contrast, Brightness, Horizontal Position, Vertical Position, Phase
and Clock for optimal performance.
Q: When I install my monitor, how do I get the best performance from the monitor?
A:
1. For best performance, make sure your display settings are set at
1280x1024@60Hz for 19". Note: You can check the current display settings by
pressing the OSD OK button once. The current display mode is shown in OSD
first page.
2. To install the Flat Panel Adjust (FPadjust) program located on the monitor
setup CD-ROM, open the CD-ROM and double-click the FP_setup4.3.exe
icon. This will install FP Adjust automatically and place a shortcut on your
desktop.
3. Run FPadjust by double clicking the shortcut. Follow the instructions step by
step to optimize image performance with your system's video controller.
Q: How do LCDs compare to CRTs in terms of radiation?
A: Because LCDs do not use an electron gun, they do not generate the same amount
of radiation at the screen surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (4 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
Compatibility with other Peripherals
Q: Can I connect my LCD monitor to any PC, workstation or Mac?
A: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and
workstations. You may need a cable adapter to connect the monitor to your Mac
system. Please contact your dealer/retailer for more information.
Q: Are Philips LCD monitors Plug-and-Play?
A: Yes, the monitors are Plug-and-Play compatible with Windows® 95, 98, 2000, XP
and Vista.
Q: What is USB (Universal Serial Bus)?
A: Think of USB as a smart plug for PC peripherals. USB automatically determines
resources (like driver software and bus bandwidth) required by peripherals. USB
makes necessary resources available without user intervention. There are three main
benefits of USB. USB eliminates "case anxiety," the fear of removing the computer
case to install circuit board cards -- that often requires adjustment of complicated IRQ
settings -- for add-on peripherals. USB does away with "port gridlock." Without USB,
PCs are normally limited to one printer, two Com port devices (usually a mouse and
modem), one Enhanced Parallel Port add-on (scanner or video camera, for example),
and a joystick. More and more peripherals for multimedia computers come on the
market every day. With USB, up to 127 devices can run simultaneously on one
computer. USB permits "hot plug-in." No need to shut down, plug in, reboot and run
set up to install peripherals. No need to go through the reverse process to unplug a
device. Bottom line: USB transforms today's "Plug-and-Pray" into true Plug-and-Play!
Please refer to glossary for more information about USB.
Q: What is a USB hub ?
A: A USB hub provides additional connections to the Universal Serial Bus. A hub's
upstream port connects a hub to the host, usually a PC. Multiple downstream ports in
a hub allows connection to another hub or device, such as a USB keyboard, camera
or printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (5 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
LCD Panel Technology
Q: What is a Liquid Crystal Display?
A: A Liquid Crystal Display (LCD) is an optical device that is commonly used to
display ASCII characters and images on digital items such as watches, calculators,
portable game consoles, etc. LCD is the technology used for displays in notebooks
and other small computers. Like light-emitting diode and gas-plasma technologies,
LCD allows displays to be much thinner than cathode ray tube (CRT) technology.
LCD consumes much less power than LED and gas-displays because it works on the
principle of blocking light rather than emitting it.
Q: What differentiates passive matrix LCDs from active matrix LCDs?
A: An LCD is made with either a passive matrix or an active matrix display grid. An
active matrix has a transistor located at each pixel intersection, requiring less current
to control the luminance of a pixel. For this reason, the current in an active matrix
display can be switched on and off more frequently, improving the screen refresh time
(your mouse pointer will appear to move more smoothly across the screen, for
example). The passive matrix LCD has a grid of conductors with pixels located at
each intersection in the grid.
Q: What are the advantages of TFT LCD compared with CRT?
A: In a CRT monitor, a gun shoots electrons and general light by colliding polarized
electrons on fluorescent glass. Therefore, CRT monitors basically operate with an
analog RGB signal. A TFT LCD monitor is a device that displays an input image by
operating a liquid crystal panel. The TFT has a fundamentally different structure than
a CRT: Each cell has an active matrix structure and independent active elements. A
TFT LCD has two glass panels and the space between them is filled with liquid
crystal. When each cell is connected with electrodes and impressed with voltage, the
molecular structure of the liquid crystal is altered and controls the amount of inlet
lighting to display images. A TFT LCD has several advantages over a CRT, since it
can be very thin and no flickering occurs because it does not use the scanning
method.
Q: Why is vertical frequency of 60Hz optimal for an LCD monitor?
A: Unlike a CDT monitor, the TFT LCD panel has a fixed resolution. For example, an
XGA monitor has 1024x3 (R, G, B) x 768 pixels and a higher resolution may not be
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (6 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
available without additional software processing. The panel is designed to optimize
the display for a 65MHz dot clock, one of the standards for XGA displays. Since the
vertical/horizontal frequency for this dot clock is 60Hz/48kHz, the optimum frequency
for this monitor is 60Hz.
Q: What kind of wide-angle technology is available? How does it work?
A: The TFT LCD panel is an element that controls/displays the inlet of a backlight
using the dual-refraction of a liquid crystal. Using the property that the projection of
inlet light refracts toward the major axis of the liquid element, it controls the direction
of inlet light and displays it. Since the refraction ratio of inlet light on liquid crystal
varies with the inlet angle of the light, the viewing angle of a TFT is much narrower
than that of a CDT. Usually, the viewing angle refers to the point where the contrast
ratio is 10. Many ways to widen the viewing angle are currently being developed and
the most common approach is to use a wide viewing angle film, which widens the
viewing angle by varying the refraction ratio. IPS (In Plane Switching) or MVA (Multi
Vertical Aligned) is also used to give a wider viewing angle.
Q: Why is there no flicker on an LCD Monitor?
A: Technically speaking, LCDs do flicker, but the cause of the phenomenon is
different from that of a CRT monitor -- and it has no impact of the ease of viewing.
Flickering in an LCD monitor relates to usually undetectable luminance caused by the
difference between positive and negative voltage. On the other hand, CRT flickering
that can irritate the human eye occurs when the on/off action of the fluorescent object
becomes visible. Since the reaction speed of liquid crystal in an LCD panel is much
slower, this troublesome form of flickering is not present in an LCD display.
Q: Why is an LCD monitor virtually low of Electro Magnetic Interference?
A: Unlike a CRT, an LCD monitor does not have key parts that generate Electro
Magnetic Interference, especially magnetic fields. Also, since an LCD display utilizes
relatively low power, its power supply is extremely quiet.
Ergonomics, Ecology and Safety Standards
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (7 of 8)2006-12-06 ¤U¤È 05:44:50
FAQs (Frequently Asked Questions)
Q: What is the CE mark?
A: The CE (Conformité Européenne) mark is required to be displayed on all regulated
products offered for sale on the European market. This 'CE' mark means that a
product complies with the relevant European Directive. A European Directive is a
European 'Law' that relates to health, safety, environment and consumer protection,
much the same as the U.S. National Electrical Code and UL Standards.
Q: Does the LCD monitor conform to general safety standards?
A: Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 99/03
standards for the control of radiation, electromagnetic waves, energy reduction,
electrical safety in the work environment and recyclability. The specification page
provides detailed data on safety standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_faq.htm (8 of 8)2006-12-06 ¤U¤È 05:44:50
Troubleshooting
Troubleshooting
This page deals with problems that can be corrected by the user. If the problem still persists after you have tried these
solutions, contact your nearest Philips dealer.
Common Problems
Having this problem
Check these items
●
Make sure the power cord is plugged into the power outlet
and into the back of the monitor.
First, ensure that the power button on the front of the monitor
is in the OFF position, then press it to the ON position.
No Picture
(Power LED not lit)
●
●
●
Make sure the computer is turned on.
Make sure the signal cable is properly connected to your
computer.
No Picture
●
●
Check to see if the monitor cable has bent pins.
The Energy Saving feature may be activated
(Power LED is amber or yellow)
Screen says
●
Make sure the monitor cable is properly connected to your
computer. (Also refer to the Quick Set-Up Guide).
Check to see if the monitor cable has bent pins.
Make sure the computer is turned on.
●
●
●
●
The Auto Function is designed for use on standard Macintosh
or IBM-compatible PCs running Microsoft Windows.
It may not work properly if using nonstandard PC or video
card.
AUTO button not working properly
Imaging Problems
●
●
Press the Auto button.
Adjust the image position using the Horizontal Position and/or
Vertical Position in OSD Main Controls.
Display position is incorrect
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_troub.htm (1 of 3)2006-12-06 ¤U¤È 05:44:51
Troubleshooting
●
Check that the signal cable is properly connected to the
graphics board or PC.
Image vibrates on the screen
Vertical flicker appears
●
●
Press the Auto button.
Eliminate the vertical bars using Phase/Clock of More
Settings in OSD Main Controls.
Horizontal flicker appears
●
●
Press the Auto button.
Eliminate the vertical bars using Phase/Clock of More
Settings in OSD Main Controls.
●
Adjust the contrast and brightness on OSD Main Controls.
(The backlight of the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker, please contact
your dealer).
The screen is too bright or too dark
An after-image appears
●
●
●
If an image remains on the screen for an extended period of
time, it may be imprinted in the screen and leave an after-
image. This usually disappears after a few hours
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
An after-image remains after the power
has been turned off.
The remaining dots are normal characteristic of the liquid
crystal used in today’s technology.
Green, red, blue, dark, and white dots
remains
For further assistance, refer to the Consumer Information Centers list and contact your local Philips distributor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_troub.htm (2 of 3)2006-12-06 ¤U¤È 05:44:51
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_troub.htm (3 of 3)2006-12-06 ¤U¤È 05:44:51
Regulatory Information
Regulatory Information
Model ID:190C7
Model No:HNC7190T
TCO '99 Information
Congratulations! You have just purchased a TCO '99 approved and
labeled product! Your choice has provided you with a product
developed for professional use. Your purchase has also contributed
to reducing the burden on the environment and also to the further
development of environmentally adapted electronics products.
Why do we have environmentally labeled computers?
In many countries, environmental labeling has become an established method for encouraging the
adaptation of goods and services to the environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful substances are used both in the
products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority
of electronics equipment, most of these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are
important from the viewpoints of both the work (internal) and natural (external) environments. Since all
methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-
influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is
often left running continuously and thereby consumes a lot of energy.
What does labeling involve?
This product meets the requirements for the TCO'99 scheme which provides for international and
environmental labeling of personal computers. The labeling scheme was developed as a joint effort by
the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of
electric and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated
and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged to have an environmental policy
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (1 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
which must be adhered to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time
to reactivate the computer shall be reasonable for the user.
Labeled products must meet strict environmental demands, for example, in respect of the reduction of
electric and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The
complete environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO'99 approved and labeled products may also be obtained via
the Internet, using the address: http://www.tco-info.com/
Environmental Requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their
purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer
casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride,
and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both
the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe
health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-
accumulative* processes. Flame retardants have been found in human blood and researchers fear that
disturbances in fetus development may occur.
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not
contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the
printed circuit boards since no substitutes are available.
Cadmium**
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (2 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer
displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99
requirement states that batteries, the color-generating layers of display screens and the electrical or
electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is
toxic in high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury.
It also demands that mercury is not present in any of the electrical or electronics components associated
with the labeled unit.
CFCs (freons)
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the
manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit
boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing
increased reception on earth of ultraviolet light with increased risks e.g. skin cancer (malignant
melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous
system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the
inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.
Recycling Information for Customers
Philips establishes technically and economically viable objectives to optimize the environmental
performance of the organization's product, service and activities.
From the planning, design and production stages, Philips emphasizes the important of making products
that can easily be recycled. At Philips, end-of-life management primarily entails participation in national
take-back initiatives and recycling programs whenever possible, preferably in cooperation with
competitors.
There is currently a system of recycling up and running in the European countries, such as The
Netherlands, Belgium, Norway, Sweden and Denmark.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (3 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic
Industries Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life
electronics products from household sources. In addition, the Northeast Recycling Council (NERC) - a
multi-state non-profit organization focused on promoting recycling market development - plans to
implement a recycling program.
In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA)
to follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw
For help and service, please contact Consumers Information Center or F1rst Choice Contact Information
Center in each country or the following team of Environmental specialist can help.
Mr. WY Chen- Environment manager
Philips Multimedia Flat Display
E-mail: [email protected]
Tel: +886 (0) 3 222 6791
Mr. Maarten ten Houten - Senior Environmental Consultant
Philips Consumer Electronics
E-mail: [email protected]
Tel: +31 (0) 40 27 33402
Mr. Delmer F. Teglas
Philips Consumer Electronics North America
E-mail: [email protected]
Tel: +1 865 521 4322
Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households
This marking on the product or on its packaging illustrates that, under European Directive
2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of
with normal household waste. You are responsible for disposal of this equipment through a designated
waste electrical and electronic equipment collection. To determine the locations for dropping off such
waste electrical and electronic, contact your local government office, the waste disposal organization that
serves your household or the store at which you purchased the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (4 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
CE Declaration of Conformity
Philips Consumer Electronics declare under our responsibility that the product is in conformity with the
following standards
- EN60950-1:2001 (Safety requirement of Information Technology Equipment)
- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)
- EN55024:1998 (Immunity requirement of Information Technology Equipment)
- EN61000-3-2:2000 (Limits for Harmonic Current Emission)
- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)
following provisions of directives applicable
- 73/23/EEC (Low Voltage Directive)
- 89/336/EEC (EMC Directive)
- 93/68/EEC (Amendment of EMC and Low Voltage Directive)
and is produced by a manufacturing organization on ISO9000 level.
The product also comply with the following standards
- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monitor)
- ISO13406-2 (Ergonomic requirement for Flat Panel Display)
- GS EK1-2000 (GS specification)
- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)
- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)
- TCO'99 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO:
Swedish Confederation of Professional Employees) for TCO versions
Energy Star Declaration
This monitor is equipped with a function for saving energy which supports the VESA Display
Power Management Signaling (DPMS) standard. This means that the monitor must be
connected to a computer which supports VESA DPMS. Time settings are adjusted from the
system unit by software.
VESA State
ON (Active)
LED Indicator
Green
Power Consumption
< 36 W
Normal operation
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (5 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
Power
Saving Alternative
2
OFF (Sleep)
Switch Off
Amber
Off
< 1 W
< 1 W
One step
®
As an ENERGY STAR Partner, PHILIPS has determined that this product meets
®
the ENERGY STAR guidelines for energy efficiency.
We recommend you switch off the monitor when it is not in use for a long time.
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
●
●
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a
computer device.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (6 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or
excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
FCC Declaration of Conformity
Trade Name: Philips
Responsible Party: Philips Consumer Electronics North America
P.O. Box 671539
Marietta , GA 30006-0026
1-888-PHILIPS (744-5477)
Declaration of Conformity for Products Marked with FCC Logo, United States Only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de
class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon
à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une
installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences
qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer
des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir
l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la
cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce
qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur
pourrait essayer de corriger la situation en prenant les mesures suivantes:
●
●
Réorienter ou déplacer l'antenne de réception.
Augmenter la distance entre l'équipement et le récepteur.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (7 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
●
●
Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.
Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de
conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement.
N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
EN 55022 Compliance (Czech Republic Only)
MIC Notice (South Korea Only)
Class B Device
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (8 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
Please note that this device has been approved for non-business purposes and may be used in any
environment, including residential areas.
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong
socket). All equipment that works together (computer, monitor, printer, and so on) should have the same
power supply source.
The phasing conductor of the room's electrical installation should have a reserve short-circuit protection
device in the form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply
socket, which should be located near the equipment and easily accessible.
A protection mark "B" confirms that the equipment is in compliance with the protection usage
requirements of standards PN-93/T-42107 and PN-89/E-06251.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (9 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
North Europe (Nordic Countries) Information
Placering/Ventilation
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR
DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT
ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR
STØMTILFØRSEL ER LETTE Å NÅ.
BSMI Notice (Taiwan Only)
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (10 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden
durch Röntgenstrahlen" festgelegten Vorschriften.
Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der
Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs.
4 der Röntgenverordnung erfüllt sind.
Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß
1. Reparaturen nur durch Fachpersonal durchgeführt werden.
2. nur original-Ersatzteile verwendet werden.
3. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.
Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem
Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem
Zeichenkontrast wären die Folge).
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.
ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß
NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.
End-of-Life Disposal
Your new monitor contains materials that can be recycled and reused. Specialized companies can
recycle your product to increase the amount of reusable materials and to minimize the amount to be
disposed of.
Please find out about the local regulations on how to dispose of your old monitor from your local Philips
dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (11 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal
regulations.
Information for UK only
WARNING - THIS APPLIANCE MUST BE GROUNDING.
Important:
This apparatus is supplied with an approved moulded 13A
plug. To change a fuse in this type of plug proceed as
follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or
BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate 3-pin plug fitted in its
place.
If the mains plug contains a fuse, this should have a value
of 5A. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5A.
Note: The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance
with the following code:
BLUE - "NEUTRAL" ("N")
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (12 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
BROWN - "LIVE" ("L")
GREEN & YELLOW - "GROUND" ("G")
1. The GREEN AND YELLOW wire must be connected to
the terminal in the plug which is marked with the letter "G"
or by the Ground symbol
AND YELLOW.
or coloured GREEN or GREEN
2. The BLUE wire must be connected to the terminal which
is marked with the letter "N" or coloured BLACK.
3. The BROWN wire must be connected to the terminal
which marked with the letter "L" or coloured RED.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply
over the three wires.
China RoHS
The People's Republic of China released a regulation called "Management Methods for Controlling
Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products
including CRT and LCD monitor which are produced and sold for China market have to meet China
RoHS request.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (13 of 14)2006-12-06 ¤U¤È 05:44:53
Regulatory Information
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/regs/regulat.htm (14 of 14)2006-12-06 ¤U¤È 05:44:53
Other Related Information
Other Related Information
Information for Users in the U. S.
For units set at 115 V :
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord
a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
For units set at 230 V:
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord
a maximum of 15-feet long and a tandem blade, grounding type attachment plug rated 15 A, 250 V.
Information for Users outside the U.S.
For units set at 230 V:
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated
15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which
the equipment will be installed and / or be marked HAR.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/safety/saf_other.htm2006-12-06 ¤U¤È 05:44:54
About This Manual
About This Manual
About This Guide
This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It
describes the LCD monitor's features, setup, operation and other important information. Its
contents are identical to the information in our printed version.
It includes the following sections:
●
Safety and Troubleshooting Information provides tips and solutions for common problems
as well as other related information you may need.
●
●
About This Electronic User's Manual gives an overview of information included, along with
notation icon descriptions and other documentation for your reference.
Product Information gives an overview of the monitor's features as well as the technical
specifications for this monitor.
●
Installing Your Monitor describes the initial setup process and gives an overview of how to
use the monitor.
●
●
On-Screen Display provides information on adjusting the settings on your monitor.
Customer Care and Warranty contains a list of worldwide Philips Consumer Information
Centers along with help desk phone numbers and information on the warranty applicable
to your product.
●
●
Glossary defines technical terms.
Download and Print Option transfers this entire manual to your hard drive for easy
reference.
Notational Descriptions
The following subsections describe notational conventions used in this document.
Notes, Cautions and Warnings
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/about/about.htm (1 of 2)2006-12-06 ¤U¤È 05:44:59
About This Manual
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic
type. These blocks contain notes, cautions or warnings. They are used as follows:
NOTE: This icon indicates important information and tips that help you make
better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how
to avoid the problem.
Some warnings may appear in alternate formats and may not be accompanied by an icon. In
such cases, the specific presentation of the warning is mandated by the relevant regulatory
authority.
©2006 Koninklijke Philips Electronics NV
All rights reserved. Reproduction, copying, use, modification, hiring, renting, public performance, transmission and/or
broadcasting in whole or in part is prohibited without written consent of Philips Electronics NV
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/about/about.htm (2 of 2)2006-12-06 ¤U¤È 05:44:59
Product Information
Product Information
Product Features
190C7
●
Design that complements any interior
❍
❍
❍
Chic dual-tone design enlivens your space
Convenient, understated control buttons create a clean look
'Hug' bezel for a warm, harmonious design look
●
●
●
Outstanding front of screen performance
❍
Fast response time
❍
Dual input accepts both analog VGA and digital DVI signals
Green design
❍
Tough, impact-resistant, environment-friendly case
Lead-free design safeguards our environment
❍
Great convenience
❍
❍
❍
Easy to adjust display settings with Philips SmartControl
Embedded power supply eliminates external power adaptors
Cable clip manages cables for a tidy work space
Lead-free Product
Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health
and promotes environmentally sound recovery and disposal of waste from electrical and electronic
equipment.Philips complies with the European Community stringent RoHS Directive mandating
restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be
confident that your display device does not harm the environment.
Technical Specifications*
LCD PANEL
• Type
TFT LCD
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (1 of 7)2006-12-06 ¤U¤È 05:45:04
Product Information
• Screen size
• Pixel Pitch
19" / 48.2 cm diagonal
0.294 x 0.294 mm
1280 x 1024 pixels
R.G.B. vertical stripe
• LCD Panel type
Anti-glare polarizer, hard coated
• Effective viewing area
376.3 x 301.1 mm
SCANNING
Vertical refresh rate
Horizontal Frequency
56 Hz-76 Hz
30k Hz-83 kHz
VIDEO
• Video dot rate
140 MHz
75 ohm
• Input impedance
- Video
- Sync
2.2K ohm
700m Vpp
• Input signal levels
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polarities
Positive and negative
Optical characteristics
• Peak contrast angle
• White Chromaticity
6 o'clock
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
* This data is subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (2 of 7)2006-12-06 ¤U¤È 05:45:04
Product Information
Resolution & Preset Modes
• Maximum
1280 x 1024 at 75 Hz
1280 x 1024 at 60 Hz
•
Recommended
24 user definable modes
19 factory preset modes:
H. freq (kHz)
31.5
31.5
35.0
37.9
37.5
35.2
37.9
48.1
46.9
48.4
56.5
60.0
67.5
60.0
63.9
80.0
49.7
68.7
71.8
Resolution
720*400
640*480
640*480
640*480
640*480
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
1152*864
1280*960
1280*1024
1280*1024
823*624
1152*870
1152*900
V. freq (Hz)
70
60
67
73
75
56
60
72
75
60
70
75
75
60
60
75
75
75
76
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (3 of 7)2006-12-06 ¤U¤È 05:45:04
Product Information
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically
reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected,
the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this
automatic power saving feature:
Power Management Definition
VESA Mode
Video
H-sync
V-sync
Power Used
LED color
Active
Sleep
ON
OFF
OFF
Yes
No
-
Yes
No
-
< 36 W (typ.)
< 1 W
Green
Amber
Off
Switch Off
< 1W
®
®
This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has
®
determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Physical Specifications
• Dimension (WxHxD) *
• Weight
442 x 420 x 201 mm (incl. Pedestal)
5.3 kg
• Tilt
-5° ~ 25°
• Power supply
• Power consumption
100 — 240 VAC, 50/60 Hz
36 W* (typ.)
0° C to 35° C (operating)
-20° C to 60° C (storage)
• Temperature
• Relative humidity
• System MTBF
20% to 80%
50K hours (including CCFL 40K hours)
* This data is subject to change without notice.
* Resolution 1280x1024, standard size, brightness max., contrast 50%, 6500° K, full white pattern.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (4 of 7)2006-12-06 ¤U¤È 05:45:04
Product Information
Pin Assignment
1. The DVI connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are
listed in the following table:
Pin
No.
Pin
No.
Pin
No.
Signal Assignment
Signal Assignment
Signal Assignment
T.M.D.S. Data2-
T.M.D.S. Data2+
T.M.D.S. Data2/4 Shield
No connect
T.M.D.S. Data1-
T.M.D.S. Data1+
T.M.D.S. Data1/3 Shield
No connect
17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
19 T.M.D.S. Data0/5 Shield
20 No connect
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
No connect
No connect
21 No connect
DDC Clock
+5V Power
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-
DDC Data
Ground (for +5V)
* Analog V-sync
16 Hot Plug Detect
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
No.
Pin
No.
Assignment
Assignment
Red video input
+5V
1
2
3
9
Green video input/SOG
Blue video input
Logic ground
Ground
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (5 of 7)2006-12-06 ¤U¤È 05:45:04
Product Information
Sense (GND)
Serial data line (SDA)
H. Sync / H+V
4
5
6
7
8
12
13
14
15
Hot Plug Detect
Red video ground
Green video ground
Blue video ground
V. Sync (VCLK for DDC)
Data clock line (SCL)
Product Views
Follow the links to see various views of the monitor and its components.
Physical Function
1) Tilt
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (6 of 7)2006-12-06 ¤U¤È 05:45:04
Product Information
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/product.htm (7 of 7)2006-12-06 ¤U¤È 05:45:04
Philips Pixel Defect Policy
Philips Pixel Defect Policy
Philips' Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice
stringent quality control. However, pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable. No
manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number
of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect
levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT LCD panel must exceed
these acceptable levels. For example, no more than 0.0004% of the sub pixels on a 15" XGA monitor may be defective. Furthermore, Philips
sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid
worldwide.
Pixels and Sub pixels
A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image.
When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored
sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors.
Types of Pixel Defects
Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel
defects within each category.
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright dot is a sub-pixel that stands out
on the screen when the monitor displays a dark pattern. There are the types of bright dot defects:
Two
adjacent lit sub pixels: - Red + Blue = Purple - Red + Green = Yellow -
Green
+ Blue = Cyan (Light Blue)
One lit red, green or blue sub
pixel
Three adjacent lit sub pixels
(one white pixel)
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/pixel.htm (1 of 3)2006-12-06 ¤U¤È 05:45:09
Philips Pixel Defect Policy
A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent
brighter than neighboring dots.
Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out
on the screen when the monitor displays a light pattern. These are the types of black dot defects:
One dark sub pixel
Two or three adjacent dark sub pixels
Proximity of Pixel Defects
Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for
the proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must
have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
BRIGHT DOT DEFECTS
MODEL
ACCEPTABLE LEVEL
190C7
1 lit subpixel
3 or fewer
2 adjacent lit subpixels
1 or fewer
3 adjacent lit subpixels (one white pixel)
Distance between two bright dot defects*
0
25 mm or more
Total bright dot defects of all types
3 or fewer
BLACK DOT DEFECTS
MODEL
ACCEPTABLE LEVEL
190C7
1 dark subpixel
5 or fewer
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/pixel.htm (2 of 3)2006-12-06 ¤U¤È 05:45:09
Philips Pixel Defect Policy
2 adjacent dark subpixels
3 adjacent dark subpixels
2 or fewer
0
Distance between two black dot defects*
Total black dot defects of all types
15 mm or more
5 or fewer
TOTAL DOT DEFECTS
MODEL
ACCEPTABLE LEVEL
190C7
Total bright or black dot defects of all types
5 or fewer
Note:
* 1 or 2 adjacent sub pixel defects = 1 dot defect
All Philips monitors are ISO13406-2 Compliant
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/pixel.htm (3 of 3)2006-12-06 ¤U¤È 05:45:09
SmartManage
SmartManage
Introduction
Philips SmartManage is an advanced solution for users, corporate/institution IT administrator in
particular, to manage their Philips monitors as part of the asset management environment. The
solution includes three essential components, Philips SmartManage Administrator, and Philips
SmarControl and Agent.
Philips SmartManage is a solution joint developed by Philips and Altiris Inc.
SmartManage Features and Benefits
The Philips SmartManage is a working console for IT management to gather monitors assets
information, run asset report, control assets security, monitor assets security, and issue instant
messages to monitor users.
Philips SmartManage includes the following major features:
1. Provides an additional security measure that helps corporate users safeguard their
investment.
2. Power saving feature that reduces utility costs and manpower required to turn monitors on or
off.
3. SmartControl provides an efficient means for adjusting monitor performance and settings.
4. Built-in asset reports reduce audit/maintenance manpower, cycle time and costs.
A trial version of SmartManage can be downloaded from
For more information of Philips SmartManage, please contact with Philips sales representatives in
your country.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/smart.htm (1 of 6)2006-12-06 ¤U¤È 05:45:10
SmartManage
SmartManage is a software dedicated to business environments. Personal users
normally do not need to use SmartManage.
Philips SmartControl
The SmartControl and SmartManage Agent are deployed and installed in computers using Philips
monitors. With SmartControl and SmartManage Agent, monitors and PCs can interact with the
administrator's inquiries. Because SmartControl operates on individual PC, end users can also use
SmartControl to adjust monitor's performance settings.
1. Requirement
●
Graphic cards with nVIDIA (TNT2, GeForce, Quadro, or newer) and ATI (Radeon or newer)
graphic chipsets that support the DDC/CI interface
●
●
Microsoft Windows 2000 and XP operation systems.
Philips monitors supporting DDC/CI interface
2. Installation
How to download "SmartControl Installation " file:
2. Select "Your Country"
3. Click on "Contact & Support"
4. Enter your model number
5. Enter "Software & Driver" page
6. Select "SmartControl Software", and you can download SmartControl and its driver
for installation.
3. Accessing SmartControl
●
Right click on the desktop of your PC, and select Properties from the shortcut menu pops
up.
●
●
Click on Settings tab, and click on Advanced button.
Click Philips SmartControl tab.
4. SmartControl Options
●
Display and Sound
By moving the sliding bar toward left or right, users will be able to adjust brightness, contrast,
audio volume (if applicable), video noise (not applicable when using DVI-D input), and color
temperatures.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/smart.htm (2 of 6)2006-12-06 ¤U¤È 05:45:10
SmartManage
●
Position
Users can adjust the horizontal and vertical position of the screen by moving the sliding bar
left and right. This function is disabled when using DVI-D (digit) input.
●
Product Information
Click Product Information in the left pane to view the product information stored in the
monitor's memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/smart.htm (3 of 6)2006-12-06 ¤U¤È 05:45:10
SmartManage
●
General
Click on General for general information including driver information, device information, and
monitor control.
Within monitor control, users can click on Auto Setup to achieve optimum performance or click on
factory reset to reset the parameters of the monitor. Such choices are disabled when using DVI-D
(digit) input.
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to manage monitors
across the network
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/smart.htm (4 of 6)2006-12-06 ¤U¤È 05:45:10
SmartManage
SmartControl is a control panel extension, which helps users to adjust monitor performances and
settings by a software interface, instead of the hardware buttons at the front bezel of the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl becomes un-usable, what
do I do?
A. Restart your PC and see if SmartControl can work. Otherwise, you will need to remove and re-
install SmartControl to ensure proper driver is installed.
Q3. The SmartControl functions well at the beginning, but it is not workable, what can I do?
A. If the following actions were executed, the monitor driver may need to be re-installed.
●
●
●
●
●
Change video graphic adapter to another one
Update video driver
Activities on OS, such as service pack or patch
Run Windows Update and updated monitor and/or video driver
Windows was booted with the monitor power off or disconnected.
To find out, please right click My Computer and click on Properties->Hardware-> Device Manager.
If you see "Plug and Play Monitor" shows under Monitor, then you need to re-install. Simply remove
SmartControl and re-install it.
Q4. After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while
or a failure message shows, what happened?
A. It might be your graphic adaptor is not compatible with the SmartControl. If your graphic adaptor
is one of the above mentioned brands, try to download the most updated graphic adaptor driver
from corresponding companies’ web site. Install the driver. Remove SmartControl, and re-install it
once more.
If it is still not working, we are sorry that the graphic adaptor is not supported. Please pay attention
to Philips’ web site for any updated SmartControl driver available.
Q5. When I click on Product Information, only partial information is shown, what happened?
A. It might be your graphic card adaptor driver is not the most updated version which fully
supporting DDC/CI interface. Please try to download the most updated graphic adaptor driver from
corresponding companies’ web site. Install the driver. Remove SmartControl, and re-install it once
more.
Q6. In a monitor with the SmartImage feature, the sRGB scheme of color temperature function in
SmartControl is not responding, why?
A. When SmartImage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you
need to disable SmartImage with the
button at the front bezel of your monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/smart.htm (5 of 6)2006-12-06 ¤U¤È 05:45:10
SmartManage
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/product/smart.htm (6 of 6)2006-12-06 ¤U¤È 05:45:10
Installing Your LCD Monitor
Installing Your LCD Monitor
Front View Product Description
UP and DOWN buttons are used when adjusting the OSD of your
monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/install.htm (1 of 3)2006-12-06 ¤U¤È 05:45:11
Installing Your LCD Monitor
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also
used in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are
pressed, the adjustment controls for the BRIGHTNESS will show up.
OK button which when pressed will take you to the OSD controls.
POWER button switches your monitor on.
Automatically adjust the horizontal position, vertical position, phase
and clock setting.
Rear View
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/install.htm (2 of 3)2006-12-06 ¤U¤È 05:45:11
Installing Your LCD Monitor
1 Kensington anti-thief lock
2 AC power input
3 DVI-D input
4 VGA input
Optimizing Performance
●
For best performance, ensure that your display settings are set at 1280x1024, 60Hz.
Note: You can check the current display settings by pressing the 'OK' button
once. The current display mode is shown in OSD main controls called
RESOLUTION.
●
You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best
performance out of your monitor. This is included on this CD. Step-by-step instructions are
provided to guide you through the installtion process. Click on the link to know more about
this program.
More about
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/install.htm (3 of 3)2006-12-06 ¤U¤È 05:45:11
Connecting to Your PC
Connecting to Your PC
Accessory Pack
Unpack all the parts.
Power cord
VGA cable
EDFU pack
Connecting to Your PC
Connect the power cord and DVI cable to the back of the monitor firmly. (Philips has pre-connected
VGA cable for the first installation.)
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/connect.htm (1 of 2)2006-12-06 ¤U¤È 05:45:20
Connecting to Your PC
Connect the cables to the back of your computer by following these steps:
(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Plug the power cord on your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image, installation
is complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/connect.htm (2 of 2)2006-12-06 ¤U¤È 05:45:20
The Base
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/base.htm (3 of 3)2006-12-06 ¤U¤È 05:45:20
Getting Started
Your LCD Monitor :
Getting Started
Getting Started
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vista or later
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for
Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) should be installed in order that
your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/
XP/Vista and the Plug & Play application can be activated. The installation procedure based on
Windows® '95 OEM Release 2 , 98 , 2000, Me, XP and Vista is specified as follows.
For Windows® 95
1. Start Windows® '95.
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select the 'Monitor' button, point to 'Change...' then click on 'Have Disk...'.
6. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click
on the 'OK' button.
7. Click on the 'OK' button then select your monitor model and click on 'OK'.
8. Click on the 'Close' button.
For Windows® 98
1. Start Windows® 98.
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select the 'Monitor' button, point to 'Change...' then click on 'Next'
6. Select 'Display a list of all the drivers in a specific location, so you can choose the driver
you want.' then click on 'Next' and then click on 'Have Disk...'.
7. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click
on the 'OK' button.
8. Click on the 'OK' button then select your monitor model and click on the 'Next' button.
9. Click on the 'Finish' button then the 'Close' button.
For Windows® Me
1. Start Windows® Me.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/gt_start.htm (1 of 3)2006-12-06 ¤U¤È 05:45:21
Getting Started
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select the 'Monitor' button, then click on 'Change...' button.
6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver
you want', then click on 'Next' and then click on 'Have Disk...'.
8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click
on the 'OK' button.
9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.
10. Click on 'Finish' button then the 'Close' button.
For Windows® 2000
1. Start Windows® 2000.
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select 'Monitor'
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please
stop installation.
- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps
given below.
6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
7. Select 'Display a list of the known drivers for this device so that I can choose a specific
driver', then click on 'Next' and then click on 'Have disk...'.
8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).
9. Click on the 'Open' button, then click on the 'OK' button.
10. Select your monitor model and click on the 'Next' button.
11. Click on the 'Finish' button then the 'Close' button.
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.
For Windows® XP
1. Start Windows® XP.
2. Click on the 'Start' button and then click on 'Control Panel'.
3. Select and click on the category 'Printers and Other Hardware'
4. Click on the 'Display' Item.
5. Select the 'Settings' tab then click on the 'Advanced' button.
6. Select 'Monitor' tab
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please
stop installation.
- If the 'Properties' button is active, click on 'Properties' button.
Please follow the steps below.
7. Click on the 'Driver' tab and then click on 'Update Driver...' button.
8. Select the 'Install from a list or specific location [advanced]' radio button and then click on
the 'Next' button.
9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the
'Next' button.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/gt_start.htm (2 of 3)2006-12-06 ¤U¤È 05:45:21
Getting Started
10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the
appropriate drive F: (CD-ROM Drive).
11. Click on the 'Open' button, then click the 'OK' button.
12. Select your monitor model and click on the 'Next' button.
- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with
Windows® XP' message, please click on the 'Continue Anyway' button.
13. Click on the 'Finish' button then the 'Close' button.
14. Click on the 'OK' button and then the 'OK' button again to close the Display_Properties
dialog box.
For Windows® Vista
1. Start Windows® Vista
2. Click the Start button; select and click on 'Control Panel'.
3. Select and click on 'Hardware and Sound'.
4. Choose 'Device Manager' and Click on 'Update device drivers'.
5. Select 'Monitor' and then right click on 'Generic PnP Monitor'.
6. Click on 'Update Driver Software'.
7. Select 'Browse my computer for driver software'.
8. Click the 'Browse' button and choose the drive in which you've placed the disk. Example:
(CD-ROM Drive:\\Lcd\PC\drivers\).
9. Click the 'Next' button.
10. Wait few minutes for installing the driver, and then click 'Close' button.
If your Windows® 95/98/2000/Me/XP/Vista version is different or you need more detailed
installation information, please refer to your Windows® 95/98/2000/Me/XP/Vista user's manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/install/gt_start.htm (3 of 3)2006-12-06 ¤U¤È 05:45:21
On-Screen Display
On-Screen Display
Description of the On Screen Display
What is the On-Screen Display?
On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust
screen performance or select functions of the monitors directly through an on-screen instruction
window. A user friendly on screen display interface is shown as below :
Basic and simple instruction on the control keys.
In the OSD shown above users can press
buttons at the front bezel of the monitor to move
the cursor,
to confirm the choice or change, and to adjust/select the change.
The OSD Tree
Below is an overall view of the structure of the On-Screen Display. You can use this as a reference
when you want to work your way around the different adjustments later on.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/osd/osddesc.htm (1 of 5)2006-12-06 ¤U¤È 05:45:33
On-Screen Display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/osd/osddesc.htm (2 of 5)2006-12-06 ¤U¤È 05:45:33
On-Screen Display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/osd/osddesc.htm (3 of 5)2006-12-06 ¤U¤È 05:45:33
On-Screen Display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/osd/osddesc.htm (4 of 5)2006-12-06 ¤U¤È 05:45:33
On-Screen Display
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/osd/osddesc.htm (5 of 5)2006-12-06 ¤U¤È 05:45:33
Your Philips F1rst Choice Warranty
Your Philips F1rst Choice Warranty
Thank you for purchasing this Philips monitor.
All Philips monitors are designed and manufactured to high standards and deliver
high-quality performance, ease of use and ease of installation. Should you
encounter any difficulties while installing or using this product, please contact the
Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This
three-year service warranty entitles you to a swap model on-site if your monitor
turns out to be faulty or defective. Philips aims at a swap within 48 hours of your
call being received.
What is covered?
The Philips F1rst Choice Warranty applies within Andorra, Austria, Belgium, Cyprus, Denmark,
France, Germany, Greece, Finland, Ireland, Italy, Liechtenstein, Luxembourg, Monaco, the
Netherlands, Norway, Portugal, Sweden, Switzerland, Spain and the United Kingdom and only for
monitors originally designed, manufactured, approved and/or authorized for usage within these
countries.
Warranty coverage begins as from the day you buy your monitor. For three years thereafter, your
monitor will be swapped by at least an equivalent monitor in case of defects provided for under the
warranty coverage.
The swap monitor remains yours and Philips keeps the defective/original monitor. For the swap
monitor the warranty period remains equal to that of your original monitor, being 36 months as from
the purchase date of your original monitor.
What is excluded?
The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended
use, in accordance with its operating instructions and upon presentation of the original invoice or
cash receipt, indicating the date of purchase, dealer's name and model and production number of
the product.
The Philips F1rst Choice Warranty may not apply if:
●
●
The documents have been altered in any way or made illegible;
The model or production number on the product has been altered, deleted, removed or made
illegible;
●
●
●
Repairs or product modifications and alterations have been executed by unauthorized service
organizations or persons;
Damage is caused by accidents including but not limited to lightning, water or fire, misuse or
neglect;
Reception problems caused by signal conditions or cable or antenna systems outside the
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_1st.htm (1 of 3)2006-12-06 ¤U¤È 05:45:50
Your Philips F1rst Choice Warranty
unit;
●
●
Defects caused by abuse or misuse of the monitor;
Product requires modification or adaptation to enable it to comply with local or national
technical standards, which apply in countries for which the product was not originally
designed, manufactured, approved and/or authorized. Therefore always check whether a
product can be used in a specific country.
●
Note that products that are not originally designed, manufactured, approved and/or
authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips
F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.
Just a click away
In case of any problems, we advise you to read the operating instructions carefully or go to the www.
philips.com/support website for additional support.
Just a phone call away
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
Philips helpdesk.
To solve your problem quickly, please prepare the following details before contacting the Philips
helpdesk:
●
●
●
●
Philips type number
Philips serial number
Purchase date (copy of purchase may be required)
PC environment Processor:
❍
❍
❍
286/386/486/Pentium Pro/Internal memory
Operating system (Windows, DOS, OS/2, MAC)
Fax/Modem/Internet program?
●
Other cards installed
Having the following information available will also help speed up the process:
●
●
Your proof of purchase indicating: date of purchase, dealer name, model and product serial
number.
The full address to which the faulty monitor has to be collected and the swap model should
be delivered.
Or you can reach us via:
Website: http://www.philips.com/support
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_1st.htm (2 of 3)2006-12-06 ¤U¤È 05:45:50
Your Philips F1rst Choice Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_1st.htm (3 of 3)2006-12-06 ¤U¤È 05:45:50
F1rst Choice Contact Information
F1rst Choice Contact Information
Country
Telephone number
0820 901115
070 253 010
800 92256
Tariff
Austria
0.20
Belgium
Cyprus
0.17
Free of Charge
Local call tariff
Local call tariff
0.23
Denmark
Finland
3525 8761
09 2290 1908
08 9165 0006
0180 5 007 532
00800 3122 1223
01 601 1161
199 404 042
26 84 30 00
France
Germany
Greece
0.12
Local call tariff
Local call tariff
0.25
Ireland
Italy
Luxembourg
The Netherlands
Norway
Local call tariff
0.20
0900 0400 063
2270 8250
Local call tariff
Local call tariff
0.15
Portugal
Spain
2 1359 1440
902 888 785
08 632 0016
02 2310 2116
0906 1010 017
Sweden
Switzerland
United Kingdom
Local call tariff
Local call tariff
£0.15
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warfirst.htm2006-12-06 ¤U¤È 05:45:55
Your Guarantee in Central and Eastern Europe
Your Guarantee in Central and Eastern Europe
Dear Customer,
Thank you for purchasing this Philips product, which has been designed and manufactured to the
highest quality standards. If, unfortunately, something should go wrong with this product Philips
guarantees free of charge labor and replacement parts during a period of 36 months from date of
purchase.
What is covered?
This Philips Guarantee in Central and Eastern Europe applies within Czech Republic, Hungary,
Slovakia, Slovenia, Poland, Russia and Turkey and only for monitors originally designed,
manufactured, approved and/or authorized for usage within these countries.
Warranty coverage begins as from the day you buy your monitor. For 3 years thereafter, your
monitor will be serviced in case of defects provided for under the warranty coverage.
What is excluded?
The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer's name and model and production number of the
product.
The Philips guarantee may not apply if:
●
●
the documents have been altered in any way or made illegible;
the model or production number on the product has been altered, deleted, removed or made
illegible;
●
●
●
repairs or product modifications and alterations have been executed by unauthorized service
organizations or persons;
damage is caused by accidents including but not limited to lightning, water or fire, misuse or
neglect.
Reception problems caused by signal conditions or cable or antenna systems outside the
unit;
●
●
Defects caused by abuse or misuse of the monitor;
Product requires modification or adaptation to enable it to comply with local or national
technical standards, which apply in countries for which the product was not originally
designed, manufactured, approved and/or authorized. Therefore always check whether a
product can be used in a specific country.
Please note that the product is not defective under this guarantee in the case where modifications
become necessary in order for the product to comply with local or national technical standards
which apply in countries for which the product was not originally designed and/or manufactured.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_ee.htm (1 of 2)2006-12-06 ¤U¤È 05:45:59
Your Guarantee in Central and Eastern Europe
Therefore always check whether a product can be used in a specific country.
Just a click away
In case of any problems, we advise you to read the operating instructions carefully or go to the www.
philips.com/support website for additional support.
Just a phone call away
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
carefully before contacting our dealers or Information Centers
In case your Philips product is not working correctly or is defective, please contact your Philips
dealer or directly the Philips Service and Consumer Information Centers
Website: http://www.philips.com/support
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_ee.htm (2 of 2)2006-12-06 ¤U¤È 05:45:59
Consumer Information Centers
Consumer Information Centers
Eastern Europe
BELARUS
Technical Center of JV IBA
M. Bogdanovich str. 155
BY - 220040 Minsk
Tel: +375 17 217 33 86
ASTLINE
Petrus Brovky str. 17-101
BY - 220072 Minsk
Tel: + 375 17 284 02 03
BULGARIA
LAN Service
140, Mimi Balkanska Str.
Office center Translog
1540 Sofia, Bulgaria
Tel: +359 2 960 2360
Email: [email protected]
CZECH REPUBLIC
Xpectrum
Lužná 591/4
CZ - 160 00 Praha 6 Tel: 800 100 697
Email:[email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (1 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
BOSNIA & HERZEGOVINA
Megatrend d.o.o.
Bosnia&Herzegovina
Džemala Bijedica 2/II
BA - 71000 Sarajevo
Tel: +387 33 613 166
Email: [email protected]
CROATIA
Renoprom d.o.o.
Mlinska 5, Strmec
HR - 41430 Samobor
Tel: +385 1 333 0974
ESTONIA
FUJITSU SERVICES OU
Akadeemia tee 21G
EE-12618 Tallinn
Tel: +372 6519900
HUNGARY
Profi Service
Hungary
Külso-Váci út 123
HU - 1044 Budapest
Tel: +36 1 814
8080 Email: [email protected]
LATVIA
ServiceNet LV
Jelgavas iela 36
LV - 1055 Riga,
Tel: +371 7460399
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (2 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
MACEDONIA
AMC - Computers
kej Dimitar Vlahov bb
MK - 1000 Skopje
Tel: +389 2 3125097
LITHUANIA
ServiceNet LT
Gaiziunu G. 3
LT - 3009 KAUNAS
Tel: +370 7400088
Email: [email protected]
ROMANIA
Blue Ridge Int'l Computers SRL
115, Mihai Eminescu St., Sector 2
RO - 020074 Bucharest
Tel: +40 21 2101969
Email: [email protected]
SERBIA & MONTENEGRO
Tehnicom Service d.o.o.
Bulevar Vojvode Misica 37B
YU - 11000 Belgrade
Tel: +381 11 30 60 881
Email: [email protected]
SLOVAKIA
Datalan Servisne Stredisko
Puchovska 8
SK - 831 06 Bratislava
Tel: +421 2 49207155
Email: [email protected]
SLOVENIA
PC HAND
Brezovce 10
SI - 1236 Trzin
Tel: +386 1 530 08 24
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (3 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
POLAND
Zolter
ul.Zytnia 1
PL - 05-500 Piaseczno
Tel: +48 22 7501766
Email: [email protected]
RUSSIA
Tel: +7 095 961-1111
Tel: 8-800-200-0880
TURKEY
Türk Philips Ticaret
A.S.
Yukari Dudullu Org.San.Bolgesi
2.Cadde No:22
34776-Umraniye/Istanbul
Tel:
(0800)-261 33 02
UKRAINE
Comel
Shevchenko street 32
UA - 49030 Dnepropetrovsk
Tel: +380 562320045
Latin America
ANTILLES
Philips Antillana N.V.
Kaminda A.J.E. Kusters 4
Zeelandia, P.O. box 3523-3051
Willemstad, Curacao
Phone: (09)-4612799
Fax : (09)-4612772
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (4 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
ARGENTINA
Philips Antillana N.V.
Vedia 3892 Capital Federal
CP:
1430 Buenos Aires Phone/Fax:
(011)-4544 2047
BRASIL
Philips da Amazônia Ind.
Elet. Ltda. Rua Verbo
Divino, 1400-São Paulo-SP CEP-04719-002 Phones: 11 21210203 -São
Paulo & 0800-701-0203-Other Regions without São Paulo City
CHILE
Philips Chilena S.A.
Avenida Santa Maria 0760
P.O. box 2687Santiago de Chile
Phone: (02)-730 2000
Fax : (02)-777 6730
COLOMBIA
Industrias Philips de Colombia
S.A.-Division de Servicio
CARRERA 15 Nr. 104-33 Bogota,
Colombia Phone:(01)-8000 111001 (toll free) Fax
: (01)-619-4300/619-4104
MEXICO
Consumer Information Centre
Norte 45 No.669 Col.
Industrial Vallejo C.P.02300,
-Mexico, D.F. Phone:
(05)-3687788 / 9180050462 Fax
: (05)-7284272
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (5 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
PARAGUAY
Av. Rca. Argentina 1780 c/Alfredo
Seiferheld
P.O. Box 605
Phone: (595 21) 664 333
Fax: (595 21) 664 336
Customer
Desk:
Phone: 009 800 54 1 0004
PERU
Philips Peruana S.A.
Customer Desk Comandante
Espinar 719 Casilla
1841 Limab18
Phone: (01)-2136200
Fax : (01)-2136276
URUGUAY
Rambla O'Higgins 5303 Montevideo
Uruguay
Phone:
(598) 619 66 66
Fax: (598) 619 77 77
Customer Desk:
Phone: 0004054176
VENEZUELA
Industrias Venezolanas Philips
S.A. Apartado Postal
1167 Caracas 1010-A
Phone: (02) 2377575
Fax : (02) 2376420
Canada
CANADA
Philips Electronics Ltd.
281 Hillmount Road Markham,
Ontario L6C 2S3 Phone: (800) 479-6696
Pacific
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (6 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
AUSTRALIA
Philips Consumer Electronics
Consumer Care Center
Level 1, 65 Epping Rd
North Ryde NSW 2113
Phone: 1300 363 391
Fax
: +61 2 9947 0063
NEW
ZEALAND Philips New
Zealand Ltd. Consumer
Help Desk 2 Wagener
Place, Mt.Albert P.O.
box 1041 Auckland
Phone: 0800 477 999 (toll free)
Fax : 0800 288 588
Asia
BANGLADESH
Philips Service Centre
100 Kazi Nazrul Islam
Avenue Kawran Bazar C/A
Dhaka-1215 Phone:
(02)-812909 Fax : (02)-813062
CHINA
SHANGHAI
Rm 1007, Hongyun
Building, No. 501 Wuning road,
200063 Shanghai P.R. China
Phone: 4008 800
008
Fax: 21-52710058
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (7 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
HONG
KONG Philips Electronics
Hong Kong Limited Consumer
Service Unit A, 10/F.
Park Sun Building
103-107 Wo Yi Hop Road
Kwai Chung, N.T.
Hong Kong
Phone:
(852)26199663
Fax: (852)24815847
INDIA
Phone: 91-20-712 2048 ext:
2765 Fax: 91-20-712 1558 BOMBAY
Philips India Customer
Relation Centre Bandbox
House 254-D Dr. A Besant
Road, Worli Bombay 400
025 CALCUTTA
Customer Relation Centre
7 justice Chandra Madhab Road
Calcutta 700 020 MADRAS
Customer Relation Centre
3, Haddows Road Madras
600 006 NEW DELHI
Customer Relation Centre
68, Shivaji Marg New
Dehli 110 015
INDONESIA
Philips Group of Companies
in Indonesia Consumer
Information Centre Jl.Buncit
Raya Kav. 99-100 12510
Jakarta Phone: (021)-7940040
ext: 2100 Fax : (021)-794 7511 / 794 7539
KOREA
Philips Consumer Service Jeong
An Bldg. 112-2 Banpo-dong, Seocho-Ku Seoul, Korea Customer Careline: 080-600-6600
Phone: (02) 709-1200 Fax
: (02) 595-9688
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (8 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
MALAYSIA
After Market Solutions Sdn
Bhd,
Philips Authorised Service Center,
Lot 6, Jalan 225, Section 51A,
46100
Petaling Jaya,
Selangor Darul Ehsan,
Malaysia.
Phone: (603)-7954 9691/7956
3695
Fax: (603)-7954 8504
Customer Careline: 1800-880-180
PAKISTAN
Philips Consumer Service
Mubarak
manzil,
39, Garden Road, Saddar,
Karachi-74400
Tel: (9221) 2737411-16
Fax:
(9221) 2721167
E-mail: [email protected]
PHILIPPINES
PHILIPS ELECTRONICS & LIGHTING,
INC.
Consumer Electronics
48F PBCOM tower
6795 Ayala Avenue cor VA Rufino
St.
Salcedo Village
1227 Makati City, PHILS
Phone: (02)-888 0572, Domestic
Toll Free: 1-800-10-PHILIPS or 1-800-10-744 5477
Fax: (02)-888 0571
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (9 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
SINGAPORE
Accord Customer Care Solutions
Ltd
Authorized Philips Service Center
Consumer Service
620A Lorong 1
Toa Rayoh
Singapore 319762
Tel: +65 6882 3999
Fax: +65 6250 8037
TAIWAN
Philips Taiwan Ltd.
Consumer Information Centre
13F, No. 3-1 Yuan Qu St., Nan
Gang Dist.,
Taipei 115, Taiwan
Phone: 0800-231-099 Fax : (02)-3789-2641
THAILAND
Philips Electronics (Thailand)
Ltd. 26-28th floor,
Thai Summit Tower
1768 New Petchburi Road
Khwaeng Bangkapi, Khet Huaykhwang
Bangkok10320
Thailand
Tel: (66)2-6528652
E-mail: cic [email protected]
Africa
MOROCCO
Philips Electronique Maroc
304,BD Mohamed V Casablanca
Phone: (02)-302992 Fax
: (02)-303446
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (10 of 11)2006-12-06 ¤U¤È 05:46:05
Consumer Information Centers
SOUTH
AFRICA PHILIPS SA (PTY)
LTD
Customer Care Center
195 Main Road
Martindale, Johannesburg
P.O.
box 58088
Newville 2114
Telephone: +27 (0) 11 471 5194
Fax: +27 (0) 11
471 5123
E-mail: [email protected]
Middle East
DUBAI
Philips Middle East B.V.
Consumer Information Centre
P.O.Box 7785 DUBAI
Phone: (04)-335 3666
Fax : (04)-335 3999
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/warcic.htm (11 of 11)2006-12-06 ¤U¤È 05:46:05
International Guarantee
Your International Guarantee
Dear Customer,
Thank you for purchasing this Philips product which has been designed and manufactured to the
highest quality standards.
If, unfortunately, something should go wrong with this product Philips guarantees free of charge
labor and replacement parts irrespective of the country where it is repaired during a period of 12
months from date of purchase. This international Philips guarantee complements the existing
national guarantee obligations to you of dealers and Philips in the country of purchase and does not
affect your statutory rights as a customer.
The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer's name and model and production number of the
product.
The Philips guarantee may not apply if:
●
●
the documents have been altered in any way or made illegible;
the model or production number on the product has been altered, deleted, removed or made
illegible;
●
●
repairs or product modifications and alterations have been executed by unauthorized service
organizations or persons;
damage is caused by accidents including but not limited to lightning, water or fire, misuse or
neglect.
Please note that the product is not defective under this guarantee in the case where modifications
become necessary in order for the product to comply with local or national technical standards
which apply in countries for which the product was not originally designed and/or manufactured.
Therefore always check whether a product can be used in a specific country.
In case your Philips product is not working correctly or is defective, please contact your Philips
dealer. In the event you require service whilst in another country a dealer address can be given to
you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can
be found in the relevant part of this booklet.
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
carefully before contacting your dealer. If you have questions which your dealer cannot answer or
Website: http://www.philips.com
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_intl.htm (1 of 2)2006-12-06 ¤U¤È 05:46:09
International Guarantee
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_intl.htm (2 of 2)2006-12-06 ¤U¤È 05:46:09
United States Guarantee
LIMITED WARRANTY (Computer Monitor)
Three Years Free Labor/Three Years Free Service on Parts
*This product must be shipped in at your expense for service.
WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales receipt or other document
showing that you purchased the product is considered proof of purchase. Attach it to this owner's
manual and keep both nearby.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For three years thereafter, all parts will be
repaired or replaced, and labor is free. After three years from the day of purchase, you pay for the
replacement or repair of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for the original warranty period.
When the warranty on the original product expires, the warranty on all replaced and repaired
products and parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
●
●
●
●
labor charges for installation or setup of the product, adjustment of customer controls on the
product, and installation or repair of antenna systems outside of the product.
product repair and/or part replacement because of misuse, accident, unauthorized repair or
other cause not within the control of Philips Consumer Electronics.
reception problems caused by signal conditions or cable or antenna systems outside the
unit.
a product that requires modification or adaptation to enable it to operate in any country other
than the country for which it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
●
●
incidental or consequential damages resulting from the product. (Some states do not allow
the exclusion of incidental or consequential damages, so the above exclusion may not apply
to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not
copyrighted.)
the model or production number on the product has been altered, deleted, removed or made
illegible.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_usa.htm (1 of 3)2006-12-06 ¤U¤È 05:46:15
United States Guarantee
Where IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is officially distributed by Philips
Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the
product, the local Philips service organization will attempt to provide service (although there may be
a delay if the appropriate spare parts and technical manual(s) are not readily available).
Where CAN I GET MORE INFORMATION?
For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A.
customers only) or (919) 573-7855.
Before Requesting Service...
Please check your owner's manual before requesting service. Adjustments of the controls
discussed there may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS...
Contact the Philips Customer Care Center phone number listed below for product assistance and
procedures for servicing:
Philips Customer Care Center
(877) 835-1838 or (919) 573-7855
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties
of merchantability and fitness for a particular purpose, are limited in duration to the duration of this
express warranty. But, because some states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
REMEMBER... Please record the model and serial numbers found on the product below.
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/
province to state/province.
Before contacting Philips, please prepare the following details so we can solve your problem
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_usa.htm (2 of 3)2006-12-06 ¤U¤È 05:46:15
United States Guarantee
quickly.
●
●
●
●
Philips type number
Philips serial number
Purchase date (copy of purchase may be required)
PC environment Processor:
❍
❍
❍
286/386/486/Pentium Pro/Internal memory
Operating system (Windows, DOS, OS/2, Apple Macintosh)
Fax/Modem/Internet program?
●
●
Other cards installed
Having the following information available will also help speed up the process:
Your proof of purchase indicating: date of purchase, dealer name, model and product serial
number.
●
The full address to which the swap model should be delivered.
Just a phone call away
Philips’ customer help desks are located worldwide. Within the U.S. you can contact Philips
customer care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from
10:00 AM-5:00 PM ET hrs by using one of the contact phone numbers.
For more information on this and more great Philips products visit our website at:
Website: http://www.philips.com
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/warranty/war_usa.htm (3 of 3)2006-12-06 ¤U¤È 05:46:15
Glossary
Glossary
A
Active matrix
This is a kind of liquid crystal display structure in which switching transistors are attached to each
pixel to control the on/off voltage. It produces a brighter and sharper display with a broader viewing
angle than a passive matrix display. Also refer to TFT (thin film transistor).
Amorphous silicon (a-Si)
A semiconductor material that is used to make the thin film transistors (TFTs) layer of an active
matrix LCD.
Aspect ratio
The width-to-height ratio of the active area of a display. In general, most monitors have an aspect
ratio of 4:3. Wide monitors or TVs have an aspect ratio of 16:9 or 16:10.
Backlight
The light source for a transmissive LCD. There are two techniques used in nowaday LCD designs.
Most TFT LCD panels use CCFLs (cold cathode fluorescent light) and a diffuser panel directly
behind the liquid crystal layer. New technology using Light Emitting Diodes (LED) are still under
development.
Brightness
The dimension of color that is referred to an achromatic scale, ranging from black to white, also
called lightness or luminous reflectance. Because of confusion with saturation, the use of this term
should be discouraged.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (1 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
C
CCFL(cold cathode fluorescent light)
These are the fluorescent light tubes providing the light for the LCD module. These tubes are
generally very thin, approximately 2 mm in diameter.
Chromaticity
That part of color specification, which does not involve illuminance. Chromaticity is two-dimensional
and specified by pairs of numbers such as dominant wavelength and purity.
CIE (Commission International de I'Eclairage)
The International Commission on Illumination, the primary international organization concerned with
color and color measurement.
Color temperature
A measurement of the color of light radiated by an object while it is being heated. This
measurement is express in terms of absolute scale, (degrees Kelvin). Lower Kelvin temperatures
such as 2400° K are red; higher temperatures such as 9300° K are blue. Neutral temperature is
white, at 6504° K. Philips monitors generally offers 9300° K, 6500° K, and user define.
Contrast
The luminance variation between light and dark areas in an image.
Contrast ratio
The ratio of luminance between the brightest white pattern and the darkest black pattern.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (2 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
D
D-SUB
A VGA Analog input connector. Your monitor comes with a D-Sub cable.
Digital Visual Interface (DVI)
The Digital Visual Interface (DVI) specification provides a high-speed digital connection for visual
data types that is display technology independent. The interface is primarily focused at providing a
connection between a computer and its display device. The DVI specification meets the needs of all
segments of the PC industry (workstation, desktop, laptop, etc.) and will enable these different
segments to unite around one monitor interface specification.
The DVI interface enables:
1. Reduce signal loss and video noise in signal due to less signal conversion.
2. Independent from display technology, and can be used on LCD, Plasma, LCOS, etc.
3. Plug and play through hot plug detection, EDID and DDC2B.
4. Digital and Analog support in a single connector (DVI-I only).
E
Energy Star Computers Program
An energy conservation program launched by the US Environmental Protection Agency (EPA),
promotes the manufacture and marketing of energy-efficient office automation equipment.
Companies joining this program, must be willing to commit themselves to manufacture one or more
products capable of going into a low -power state (< 30 W) either after a period of inactivity, or after
a predetermined time selected by the user.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (3 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
Gamma
Screen luminance as a function of video voltage approximately follows a mathematical power
function of the input video signal, the exponent of which is called gamma.
Grayscale
An achromatic scale ranging from black through a series of successively lighter grays to white.
Such a series may be made up of steps, which appear to be equally distant from one another. If the
Analog/ Digital converter is 8 bit, then the monitor can display at most 28 = 256 levels. For a color
monitor, R.G.B. each color hads 256 levels. Thus, total color can display is 256x256x256= 16.7
million.
Hue
The main attribute of a color that distinguishes it from other colors. For example, a color may have a
green, yellow, or purple hue. Color defined as having hue are know as chromatic colors. White,
black, and grays possess no hue.
IPS (In Plane Switching)
A technique of improving the viewing angle of an LCD where the liquid crystal molecules are
switched in the plane of the LCD layer rather than vertical to it.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (4 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
L
LCD (liquid crystal display)
A display composed of liquid crystal suspended between two transparent sheets. The display is
composed thousands of pixels which can be turned on or off with electrical stimulation. Thus,
colorful images/texts can be generated.
Liquid crystal
The compound found in liquid crystal displays. Liquid crystal reacts predictably when electrically
stimulated. This makes it the ideal compound to turn LCD pixels "on" or "off." Liquid crystal is
sometimes abbreviated as LC.
Luminance
A measure of the brightness or luminous intensity of light, usually expressed in units of Candelas
per square meter (cd/m2) or foot Lamberts. 1 fL=3.426 cd/m2.
Nit
A unit of luminance equal to 1 cd/m2 or 0.292 ftL.
Pixel
PICture Element; the smallest element on a computerized CRT or LCD image, and hence a display.
Polarizer
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (5 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
A light filter which only allows light waves of a certain rotation through. Polarized material with
perpendicular filtering is used in LCDs to enclose the liquid crystal. The liquid crystal is then used
as the medium which twists the light waves 90° in order to allow the light to pass through or not.
Refresh rate
The number of times per second the screen is refreshed or redrawn. This number is usually stated
in Hz (Hertz) or cycles per second. A rate of 60 Hz is equal to 60 tomes per second.
S
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital
cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are
calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in
the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Move the down
button to go to Color and press OK again. Use the right button to go to sRGB. Then move the down
button and press OK again to exit the OSD.
After this, please do not change the brightness or contrast setting of your monitor. If you change
either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.
Other:
USB plug: An upstream and a downstream USB plug is provide for user's convenience.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (6 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
TFT(thin film transistor)
Usually made from amorphous silicon (a-Si) and used as a switch to a charge storage device
located below each sub-pixel on an active matrix LCD.
U
USB or Universal Serial Bus
A smart plug for PC peripherals. USB automatically determines resources (like driver software and
bus bandwidth) required by peripherals. USB makes necessary resources available without user
intervention.
●
USB eliminates "case anxiety" -- the fear of removing the computer case to install add-on
peripherals. USB also eliminates adjustment of complicated IRQ settings when installing
new peripherals.
●
USB does away with "port gridlock." Without USB, PCs are normally limited to one printer,
two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on
(scanner or video camera, for example) and a joystick. More and more peripherals for
multimedia computers arrive on the market every day. With USB, up to 127 devices can run
simultaneously on a computer.
●
USB permits "hot plug-in." There's no need to shut down, plug in, reboot and run set-up to
install peripherals. And no need to go through the reverse process to unplug a device.
In short, USB transforms today's "Plug-and-Pray" into true Plug-and-Play!
Hub
A Universal Serial Bus device that provides additional connections to the Universal Serial Bus.
Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub.
Hubs serve to simplify USB connectivity from the user's perspective providing low cost and
complexity.
Hubs are wiring concentrators and enable the multiple attachment characteristics of USB.
Attachment points are referred to as ports. Each hub converts a single attachment point into
multiple attachment points. The architecture supports concatenation of multiple hubs.
The upstream port of a hub connects the hub towards the host. Each of the other downstream ports
of a hub allows connection to another hub or function. Hubs can detect, attach and detach at each
downstream port and enable the distribution of power to downstream devices. Each downstream
port can be individually enabled and configured at either full or low speed. The hub isolates low
speed ports from full speed signaling.
A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (7 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
controlled switch between the upstream port and downstream ports. It also has hardware support
for reset and suspend/resume signaling. The controller provides the interface registers to allow
communication to/from the host. Hub specific status and control commands permit the host to
configure a hub and to monitor and control its ports.
Device
A logical or physical entity that performs a function. The actual entity described depends on the
context of the reference. At the lowest level, device may refer to a single hardware component, as
in a memory device. At a higher level, it may refer to a collection of hardware components that
perform a particular function, such as a Universal Serial Bus interface device. At an even higher
level, device may refer to the function performed by an entity attached to the Universal Serial Bus;
for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and
logical.
Downstream
The direction of data flow from the host or away from the host. A downstream port is the port on a
hub electrically farthest from the host that generates downstream data traffic from the hub.
Downstream ports receive upstream data traffic.
Upstream
The direction of data flow towards the host. An upstream port is the port on a device electrically
closest to the host that generates upstream data traffic from the hub. Upstream ports receive
downstream data traffic.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (8 of 9)2006-12-06 ¤U¤È 05:46:21
Glossary
V
Vertical refresh rate
Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/190c7/glossary/glossary.htm (9 of 9)2006-12-06 ¤U¤È 05:46:21
Download and Print
Download and Print
Installing Your LCD monitor driver
System requirements:
●
●
PC running Windows 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP,
Windows® Vista or later
Find your driver ".inf/.icm/.cat" at : /PC/drivers/
Read the "Readme.txt" file before installing.
This page provides an option to read the manual in .pdf format. PDF files can be downloaded into
your hard disk, then viewed and printed with Acrobat Reader or through your browser.
If you do not have Adobe® Acrobat Reader installed, click on the link to install the application.
Download instructions:
To download the file:
1. Click-and-hold your mouse over the icon below. (Windows® 95/98/2000/Me/XP/Vista users right-
click)
Download
2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to
Disk'.
3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or
'source', choose 'source').
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/download/download.htm (1 of 3)2006-12-06 ¤U¤È 05:46:29
Download and Print
Printing instructions:
To print the manual:
1. With the manual file open, follow your printer's instructions and print the pages you need.
Installing FPadjust Program
The FP Adjust program generates alignment patterns which will help you adjust monitor settings
such as CONTRAST, BRIGHTNESS, HORIZONTAL & VERTICAL POSITION, PHASE and CLOCK.
System requirements:
●
PC running Windows® 95, Windows® 98, Windows® 2000, Windows® Me, Windows® XP,
Windows® Vista or later
To install FPadjust Program:
●
●
Click on the link or icon to install FPadjustment Program.
or
Click-and-hold your mouse over the icon. (Win95/98/2000/Me/XP/Vista users right-click)
Download
●
From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link
to Disk'.
●
●
Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text'
or 'source', choose 'source').
Exit your browser and install the FPadjust Program.
Read the "FP_Readme4.3.txt" file before installing.
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/download/download.htm (2 of 3)2006-12-06 ¤U¤È 05:46:29
Download and Print
Download from Www.Somanuals.com. All Manuals Search And Download.
file:///D|/EDFU/LCD/190C7/manual/english/download/download.htm (3 of 3)2006-12-06 ¤U¤È 05:46:29
|