Philips Clock Radio MCD122 User Manual

^Rw^egw^istew^{r yo}.^up^rh^proil^di^up^cts^an.^dc^go^etm^sup/^pw^orte^atlcome

MCD122

EN User manual

=+ꢀ7:ꢁ Ԛ͂ʹ˫ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

g Do not block any ventilation openings.

Install in accordance with the

1 Important

manufacturer’s instructions.

h Do not install near any heat sources such

as radiators, heat registers, stoves, or

ꢀꢁꢂꢃꢄꢅꢆꢇꢇꢆꢄꢆꢁꢈꢉꢅꢊꢋꢌꢍꢎꢈꢏꢋꢌꢐꢅꢆꢑꢇꢎꢋ\ꢃꢄꢉꢒꢅꢁꢂꢆꢁꢅ

produce heat.

Safety

Know these safety symbols

i Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

j Only use attachments/accessories

ꢉꢇꢃꢍꢋ\ꢃꢏꢅꢓꢔꢅꢁꢂꢃꢅꢑꢆꢌꢈꢕꢆꢍꢁꢈꢄꢃꢄꢖ

k Use only with the cart, stand, tripod,

ꢓꢄꢆꢍꢗꢃꢁꢘꢅꢀꢄꢅꢁꢆꢓꢎꢃꢅꢉꢇꢃꢍꢋ\ꢃꢏꢅꢓꢔꢅꢁꢂꢃꢅ

manufacturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

This ‘bolt of lightning’ indicates uninsulated

material within your unit may cause an electrical

shock. For the safety of everyone in your

household, please do not remove product

covering.

The ‘exclamation point’ calls attention to

features for which you should read the enclosed

literature closely to prevent operating and

maintenance problems.

ꢒꢓꢖꢗꢘꢗꢙꢚꢎꢛꢈꢎꢕꢂꢜꢔꢃꢂꢎꢇ!ꢂꢎꢕꢄꢊ"ꢎꢈ#ꢎꢅꢕꢂꢎꢈꢕꢎꢂꢌꢂꢃꢇꢕꢄꢃꢎ

shock, this apparatus should not be exposed to

ꢕꢆꢄꢉꢎꢈꢕꢎ$ꢈꢄꢊꢇꢔꢕꢂꢎꢆꢉꢜꢎꢈ%&ꢂꢃꢇꢊꢎꢅꢌꢌꢂꢜꢎ'ꢄꢇ!ꢎꢌꢄ(ꢔꢄꢜꢊ)ꢎ

such as vases, should not be placed on this

apparatus.

l Unplug this apparatus during lightning

storms or when unused for long periods

of time.

mꢅ ꢙꢃꢕꢃꢄꢅꢆꢎꢎꢅꢉꢃꢄꢚꢋꢍꢋꢌꢐꢅꢁꢀꢅꢛꢈꢆꢎꢋ\ꢃꢏꢅꢉꢃꢄꢚꢋꢍꢃꢅ

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

CAUTION:To prevent electric shock, match

wide blade of plug to wide slot, fully insert.

Important Safety Instructions

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

n Battery usage CAUTION –To prevent

battery leakage which may result in bodily

injury, property damage, or damage to the

unit:

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

#ꢎ Install all batteries correctly, + and - as

marked on the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢎ Do not mix batteries (old and new or

carbon and alkaline, etc.).

#ꢎ Remove batteries when the unit is not

used for a long time.

Hearing safety

Listen at a moderate volume.

#ꢎ Using headphones at a high volume can

impair your hearing.This product can

produce sounds in decibel ranges that may

cause hearing loss for a normal person,

even for exposure less than a minute.The

higher decibel ranges are offered for those

that may have already experienced some

hearing loss.

#ꢎ Sound can be deceiving. Over time your

hearing ‘comfort level’ adapts to higher

volumes of sound. So after prolonged

listening, what sounds ‘normal’ can actually

be loud and harmful to your hearing.To

guard against this, set your volume to a safe

level before your hearing adapts and leave

it there.

o Apparatus shall not be exposed to

dripping or splashing.

p Do not place any sources of danger on

ꢁꢂꢃꢅꢆꢇꢇꢆꢄꢆꢁꢈꢉꢅꢊꢃꢖꢐꢖꢅꢎꢋꢛꢈꢋꢏꢅ\ꢎꢎꢃꢏꢅꢀꢓꢜꢃꢍꢁꢉꢘꢅ

ꢎꢋꢐꢂꢁꢃꢏꢅꢍꢆꢌꢏꢎꢃꢉꢒꢖꢅ

q This product may contain lead and

mercury. Disposal of these materials

may be regulated due to environmental

considerations. For disposal or recycling

information, please contact your local

authorities or the Electronic Industries

Alliance: www.eiae.org.

Caution

To establish a safe volume level:

#ꢎ Set your volume control at a low setting.

#ꢎ Slowly increase the sound until you can

hear it comfortably and clearly, without

distortion.

# Use of controls or adjustments or performance of

procedures other than herein may result in hazardous

radiation exposure or other unsafe operation.

Listen for reasonable periods of time:

#ꢎ Prolonged exposure to sound, even at

normally ‘safe’ levels, can also cause hearing

loss.

#ꢎ *ꢂꢎꢊꢔꢕꢂꢎꢇꢈꢎꢔꢊꢂꢎꢍꢈꢔꢕꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇꢎꢕꢂꢆꢊꢈꢉꢆ%ꢌꢍꢎ

and take appropriate breaks.

Warning

# Where the MAINS plug or an appliance coupler is used

as the disconnect device, the disconnect device shall

remain readily operable.

Be sure to observe the following guidelines

when using your headphones.

Warning

#ꢎ Listen at reasonable volumes for

reasonable periods of time.

# Never remove the casing of this unit.

# Never lubricate any part of this unit.

# ꢋꢌꢆꢃꢂꢎꢇ!ꢄꢊꢎꢔꢉꢄꢇꢎꢈꢉꢎꢆꢎ]ꢆꢇ)ꢎ!ꢆꢕꢜꢎꢆꢉꢜꢎꢊꢇꢆ%ꢌꢂꢎꢊꢔꢕ#ꢆꢃꢂ;

# ꢗꢂ@ꢂꢕꢎꢁꢌꢆꢃꢂꢎꢇ!ꢄꢊꢎꢔꢉꢄꢇꢎꢈꢉꢎꢈꢇ!ꢂꢕꢎꢂꢌꢂꢃꢇꢕꢄꢃꢆꢌꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇ;

# Only use this unit indoors. Keep this unit away from

'ꢆꢇꢂꢕ)ꢎ$ꢈꢄꢊꢇꢔꢕꢂꢎꢆꢉꢜꢎꢌꢄ(ꢔꢄꢜHꢅꢌꢌꢂꢜꢎꢈ%&ꢂꢃꢇꢊ;

#ꢎ Be careful not to adjust the volume as your

hearing adapts.

#ꢎ Do not turn up the volume so high that

you can’t hear what’s around you.

#ꢎ You should use caution or temporarily

discontinue use in potentially hazardous

situations. Do not use headphones while

operating a motorized vehicle, cycling,

ꢊ"ꢆꢇꢂ%ꢈꢆꢕꢜꢄꢉ/)ꢎꢂꢇꢃ;<ꢎꢄꢇꢎ$ꢆꢍꢎꢃꢕꢂꢆꢇꢂꢎꢆꢎꢇꢕꢆ#ꢅꢃꢎ

hazard and is illegal in many areas.

# Jꢂꢂꢁꢎꢇ!ꢄꢊꢎꢔꢉꢄꢇꢎꢆ'ꢆꢍꢎ#ꢕꢈ$ꢎꢜꢄꢕꢂꢃꢇꢎꢊꢔꢉꢌꢄ/!ꢇ)ꢎꢉꢆ"ꢂꢜꢎ]ꢆ$ꢂꢊꢎ

or heat.

# Never look into the laser beam inside the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

This apparatus includes this label:

Notice

ꢓꢉꢍꢎꢃ!ꢆꢉ/ꢂꢊꢎꢈꢕꢎ$ꢈꢜꢄꢅꢃꢆꢇꢄꢈꢉꢊꢎ$ꢆꢜꢂꢎꢇꢈꢎꢇ!ꢄꢊꢎ

device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s

ꢆꢔꢇ!ꢈꢕꢄꢇꢍꢎꢇꢈꢎꢈꢁꢂꢕꢆꢇꢂꢎꢇ!ꢂꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇ;

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Note

# The type plate is located on the bottom of the

apparatus.

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

ꢂ(ꢔꢄꢁ$ꢂꢉꢇ;

The making of unauthorized copies of copy-

protected material, including computer

ꢁꢕꢈ/ꢕꢆ$ꢊ)ꢎꢅꢌꢂꢊ)ꢎ%ꢕꢈꢆꢜꢃꢆꢊꢇꢊꢎꢆꢉꢜꢎꢊꢈꢔꢉꢜꢎ

recordings, may be an infringement of

copyrights and constitute a criminal offence.

ꢛ!ꢄꢊꢎꢂ(ꢔꢄꢁ$ꢂꢉꢇꢎꢊ!ꢈꢔꢌꢜꢎꢉꢈꢇꢎ%ꢂꢎꢔꢊꢂꢜꢎ#ꢈꢕꢎꢊꢔꢃ!ꢎ

purposes.

‘DVDVideo’ is a trademark of DVD Format/

Logo Licensing Corporation.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

Download from Www.Somanuals.com. All Manuals Search And Download.

You can play DVD discs with the following

region codes:

2 Your DVD

MicroTheater

DVD region code Countries

ꢓꢊꢄꢆꢎꢋꢆꢃꢄꢅꢃ)ꢎꢛꢆꢄ'ꢆꢉ)ꢎJꢈꢕꢂꢆ

Congratulations on your purchase, and

'ꢂꢌꢃꢈ$ꢂꢎꢇꢈꢎꢋ!ꢄꢌꢄꢁꢊ\ꢎꢛꢈꢎ#ꢔꢌꢌꢍꢎ%ꢂꢉꢂꢅꢇꢎ#ꢕꢈ$ꢎꢇ!ꢂꢎ

support that Philips offers, register your product

at www.Philips.com/welcome.

Australia, New Zealand

Introduction

What’s in the box

With this unit, you can:

#ꢎ watch video from DVD/VCD/SVCD or

USB devices

#ꢎ enjoy audio from discs or USB devices

#ꢎ view pictures from discs or USB devices

#ꢎ Listen to FM radio

You can enrich sound output with these

sound effects:

#ꢎ Digital Sound Control (DSC)

#ꢎ Dynamic Bass Boost (DBB)

#ꢎ Bass/treble enhancement

Check and identify the contents of your

package:

#ꢎ Main unit

#ꢎ 2 speakers

#ꢎ Remote control with battery

#ꢎ Composite video cable (yellow)

#ꢎ Power cord

#ꢎ FM wire antenna

#ꢎ User manual

#ꢎ Quick start guide

The unit supports these media/disc formats:

Recordable

ReWritable

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview of the main unit

e f g h ijk

h DBB

#ꢎ Turn on or off dynamic bass

enhancement.

#ꢎ Turn on the apparatus; switch to

standby mode.

b VOLUME /

#ꢎ Adjust volume.

#ꢎ Adjust time.

#ꢎ Start or pause play.

#ꢎ Stop play.

#ꢎ In demo mode, activate or deactivate

demonstration.

c SOURCE

#ꢎ Select a source.

d Display panel

k MODE

#ꢎ Select repeat play modes.

#ꢎ ꢀꢂꢌꢂꢃꢇꢎꢊ!ꢔ#]ꢂꢎꢁꢌꢆꢍꢎ$ꢈꢜꢂꢊ;

#ꢎ Display current status.

#ꢎ Open or close the disc compartment.

l MP3-LINK

f Remote control sensor

#ꢎ Jack for an external audio device.

#ꢎ Skip to the previous/next track.

#ꢎ Skip to the previous/next title or

chapter.

#ꢎ Headphone socket.

n USB DIRECT

#ꢎ USB socket.

#ꢎ Select a preset radio station.

o Disc compartment

Download from Www.Somanuals.com. All Manuals Search And Download.

b Source selection keys

Overview of the remote

control

#ꢎ Select a source.

c DISPLAY/RDS (RDS function unavailable

ꢕꢀꢄꢅꢁꢂꢋꢉꢅꢚꢃꢄꢉꢋꢀꢌꢒ

#ꢎ Display play information on a

connectedTV.

d DISC MENU

#ꢎ For video discs: access or exit the disc

menu.

#ꢎ For video discs with playback

control(PBC): turn on/off PBC.

e AUDIO

#ꢎ ForVCD, select stereo, mono-left or

mono-right channel.

#ꢎ For DVD/DivX video, select an audio

language.

#ꢎ Search within a track.

#ꢎ Tune to a radio station.

#ꢎ For menus, navigate left/right.

#ꢎ Move an enlarged image left/right.

#ꢎ Rotate or invert pictures.

SLOW/ ZOOM

#ꢎ For menus, navigate up/down.

#ꢎ Rotate or invert pictures.

#ꢎ ( SLOW) For video: select a slow

play mode.

#ꢎ ( ZOOM) For video: zoom in/out.

h LOUD/DBB

#ꢎ Turn on or off automatic loudness

adjustment.

#ꢎ Turn on or off dynamic bass

enhancement.

i VOL +/-

#ꢎ Adjust volume.

#ꢎ Adjust time.

j MUTE

#ꢎ Mute or restore volume.

k CLOCK

#ꢎ Set the clock.

#ꢎ Turn on the apparatus; switch to

standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

l SLEEP/TIMER

#ꢎ Set the sleep timer.

#ꢎ Set the alarm timer.

3 Connect

m SUBTITLE

#ꢎ Select a subtitle language.

Place the unit

n GOTO

#ꢎ During disc play, specify a position to

start play.

o ANGLE/PROG

#ꢎ Select a DVD camera angle.

#ꢎ Program radio stations.

p Numeric keypad

#ꢎ Select a title/chapter/track directly.

#ꢎ Stop play.

1 Place the unit near to theTV.

#ꢎ Skip to the previous/next track.

#ꢎ Skip to the previous/next title or

chapter.

2ꢎ ꢋꢌꢆꢃꢂꢎꢇ!ꢂꢎꢌꢂ#ꢇꢎꢆꢉꢜꢎꢕꢄ/!ꢇꢎꢊꢁꢂꢆ"ꢂꢕꢊꢎꢆꢇꢎꢂ(ꢔꢆꢌꢎ

distance from theTV and at an angle

of approximately 45 degrees from the

listening position.

#ꢎ Select a preset radio station.

#ꢎ Start or pause play.

Note

t DSC

#ꢎ Select a preset sound setting.

# To avoid magnetic interference or unwanted noise,

never place this apparatus and speakers too close to

any radiation devices.

# Never place this unit in an enclosed cabinet.

# Install this unit near the AC outlet where the AC power

plug can be easily reached.

u OK

#ꢎ `ꢈꢉꢅꢕ$ꢎꢆꢎꢊꢂꢌꢂꢃꢇꢄꢈꢉ;

v A-B

#ꢎ ꢖꢂꢁꢂꢆꢇꢎꢆꢎꢊꢁꢂꢃꢄꢅꢃꢎꢊꢂꢃꢇꢄꢈꢉꢎ'ꢄꢇ!ꢄꢉꢎꢆꢎ

track/disc.

w SYSTEM MENU

Connect speakers

#ꢎ Access or exit the system setup menu.

x MODE/DIM

#ꢎ Select repeat play modes.

#ꢎ ꢀꢂꢌꢂꢃꢇꢎꢊ!ꢔ#]ꢂꢎꢁꢌꢆꢍꢎ$ꢈꢜꢂꢊ;

#ꢎ Select a brightness level for the display

screen.

Note

# Ensure that the colors of the speaker wires and

terminals are matched.

# For optimal sound, use the supplied speakers only.

# Connect only speakers with impedance that is the

same or higher than the supplied speakers. Refer to the

ꢀꢁꢂꢃꢄꢅꢃꢆꢇꢄꢈꢉꢊꢎꢊꢂꢃꢇꢄꢈꢉꢎꢈ#ꢎꢇ!ꢄꢊꢎ$ꢆꢉꢔꢆꢌ;

10 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

1ꢎ qꢈꢌꢜꢎꢜꢈ'ꢉꢎꢇ!ꢂꢎꢊꢈꢃ"ꢂꢇꢎ]ꢆꢁ;

ConnectTV

2 Insert the stripped part of the wire

completely.

#ꢎ Insert the right speaker wires to “R”,

left speaker wires to “L”.

#ꢎ Insert the red wires to “+”, black wires

to “-”.

Connect video cables

With this connection, you can watch video from

the unit on theTV screen.

You can select the best video connection that

yourTV supports.

#ꢎ Option 1: Connect through SCART (for a

standardTV).

3ꢎ ꢖꢂꢌꢂꢆꢊꢂꢎꢇ!ꢂꢎꢊꢈꢃ"ꢂꢇꢎ]ꢆꢁ;

#ꢎ Option 2: connect through component

video (for a standardTV or Progressive

ScanTV).

#ꢎ Option 3: connect through S-Video (for a

standardTV).

#ꢎ Option 4: connect through composite

video (CVBS) (for a standardTV).

Connect FM antenna

Option 1: Connect through

component video

Connect a progressive scanTV through

ꢃꢈ$ꢁꢈꢉꢂꢉꢇꢎ@ꢄꢜꢂꢈꢎ#ꢈꢕꢎ!ꢄ/!ꢂꢕꢎ(ꢔꢆꢌꢄꢇꢍꢎ@ꢄꢜꢂꢈ;

Tip

Pr/Cr

Pb/Cb

COMPONENTVIDEO IN PUT

# For optimal reception, fully extend and adjust the

position of the antenna.

# For better FM stereo reception, connect an outdoor

FM antenna to the FM AERIAL jack.

# The unit does not support MW radio reception.

1 Connect the supplied FM wire antenna to

the FM AERIAL socket on the unit.

EN 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Option 3: Connect through

composite video

# ꢛ!ꢂꢎꢁꢕꢈ/ꢕꢂꢊꢊꢄ@ꢂꢎꢊꢃꢆꢉꢎ@ꢄꢜꢂꢈꢎ(ꢔꢆꢌꢄꢇꢍꢎꢄꢊꢎꢈꢉꢌꢍꢎꢆ@ꢆꢄꢌꢆ%ꢌꢂꢎ

when a progressive scanTV is connected.

# If yourTV does not support progressive scan, you

cannot view the picture.

# For how to activate progressive scan on yourTV, refer

to theTV user manual.

Connect a progressive scanTV through

ꢃꢈ$ꢁꢈꢉꢂꢉꢇꢎ@ꢄꢜꢂꢈꢎ#ꢈꢕꢎ!ꢄ/!ꢂꢕꢎ(ꢔꢆꢌꢄꢇꢍꢎ@ꢄꢜꢂꢈ;

1 Connect component video cables (red/

blue/green - not supplied) to:

#ꢎ the VIDEO OUT (Pr/Cr Pb/CbY)

sockets on this unit.

#ꢎ the component input sockets on the

TV.

Option 2: Connect through S-Video

1 Connect the supplied composite video

cable to:

#ꢎ the VIDEO OUT socket on this unit.

#ꢎ the video input socket on theTV.

Connect audio cables

S-VIDEO IN

1 Connect an S-video cable (not supplied)

to:

L AUDIO OUT R

#ꢎ the S-Video socket on this unit.

#ꢎ the S-Video socket on theTV.

1 To play sound from theTV through this

unit, connect audio cables (red/white - not

supplied) to:

#ꢎ the AUX IN L/R sockets on this unit.

#ꢎ the audio output sockets on theTV.

12 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Get started

Connect power

Caution

# Use of controls or adjustments or performance of

procedures other than herein may result in hazardous

radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in

ꢊꢂ(ꢔꢂꢉꢃꢂ;

If you contact Philips, you will be asked for the

model and serial number of this apparatus.The

model number and serial number are on the

bottom of the apparatus.Write the numbers

here:

Model No. ____________________________

Serial No. _____________________________

Caution

# Risk of product damage! Ensure that the power supply

voltage corresponds to the voltage printed on the back

or the underside of the unit.

# Before connecting the AC power cord, ensure you have

completed all other connections.

Prepare the remote control

1 Connect the AC power cord to the wall

Caution

socket.

# Risk of explosion! Keep batteries away from heat,

ꢊꢔꢉꢊ!ꢄꢉꢂꢎꢈꢕꢎꢅꢕꢂ;ꢎꢗꢂ@ꢂꢕꢎꢜꢄꢊꢃꢆꢕꢜꢎ%ꢆꢇꢇꢂꢕꢄꢂꢊꢎꢄꢉꢎꢅꢕꢂ;

!ꢀꢄꢅ\ꢄꢉꢁ"ꢁꢋꢑꢃꢅꢈꢉꢃ#ꢅ

1 Remove the protective tab to activate the

remote control battery.

To replace the remote control batteries:

1 Open the battery compartment.

2 Insert one lithium CR2025 battery with

correct polarity (+/-) as indicated.

3 Close the battery compartment.

Note

# Before you press any function button on the remote

ꢃꢈꢉꢇꢕꢈꢌ)ꢎꢅꢕꢊꢇꢎꢊꢂꢌꢂꢃꢇꢎꢇ!ꢂꢎꢃꢈꢕꢕꢂꢃꢇꢎꢊꢈꢔꢕꢃꢂꢎ'ꢄꢇ!ꢎꢇ!ꢂꢎꢕꢂ$ꢈꢇꢂꢎ

control.

# If you are not going to use the remote control for a

long time, remove the battery.

EN 13

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Turn on theTV and switch to the correct

video-in channel in one of the following

ways:

Set clock

1 ^{In the standby mode, press and hold}

CLOCK to activate the clock setting

mode.

#ꢎ Go to the lowest channel on yourTV,

then press the Channel Down button

until you see the blue screen.

#ꢎ Press the source button repeatedly on

the remote control of yourTV.

» The hour digits are displayed and begin

to blink.

2 Press +VOL - to set the hour, then press

CLOCK again.

Tip

» The minute digits are displayed and

begin to blink.

# The video-in channel is between the lowest and highest

channels and may be called FRONT,A/V IN,VIDEO etc.

See theTV user manual on how to select the correct

input on theTV.

3 Press +VOL - to set the minute.

4 Press CLOCKꢎꢇꢈꢎꢃꢈꢉꢅꢕ$ꢎꢇ!ꢂꢎꢃꢌꢈꢃ"ꢎꢊꢂꢇꢇꢄꢉ/;

Turn on

Select the correctTV system

1 ^Press.

Change this setting if the video does not appear

correctly. By default, this setting matches the

most common setting forTVs in your country.

» The unit switches to the last selected

source.

1 Press SYSTEM MENU.

Switch to standby mode

2 Select [Video Setup].

1 Plug in AC power.

3 Select [TV System] and then press

» The unit will go to Eco Power Standby.

4 Select a setting and then press OK.

2 Long press .

#ꢎ [NTSC] - ForTV with NTSC color

system.

» Switch the unit from Eco Power

Standby mode to Standby mode.

#ꢎ [PAL] - ForTV with PAL color system.

#ꢎ [Multi] - ForTV that is compatible

with both PAL and NTSC.

Tip

5 To exit the menu, press SYSTEM MENU.

# In the Eco Power mode, you can press CLOCK key to

switch to the standby mode and view the clock (if set).

Change system menu

language

Find the correct viewing

channel

1 ^{Press SYSTEM MENU.}

2 Select [General Setup].

3 Select [OSD language] and then press

4 Select a setting and then press OK.

5 To exit the menu, press SYSTEM MENU.

1 ^Pressto turn on the unit.

2 Press DISC to switch to disc mode.

14 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Play

Turn on Progressive Scan

Progressive scan displays twice the number of

frames per seconds than interlaced scanning

(ordinaryTV system).With nearly double the

number of lines, progressive scan offers higher

ꢁꢄꢃꢇꢔꢕꢂꢎꢕꢂꢊꢈꢌꢔꢇꢄꢈꢉꢎꢆꢉꢜꢎ(ꢔꢆꢌꢄꢇꢍ;

Note

# ꢒꢄꢇ!ꢎꢊꢈ$ꢂꢎꢜꢄꢊꢃꢑꢅꢌꢂꢎꢇꢍꢁꢂꢊ)ꢎꢁꢌꢆꢍꢎ$ꢆꢍꢎꢜꢄ##ꢂꢕ;

Before you turn on this feature, ensure that:

#ꢎ TheTV supports progressive scan signals.

#ꢎ You have connected this unit with theTV

through component video.

Play a disc

1 Turn on theTV.

Caution

2 Ensure that theTV progressive scan mode

is deactivated (see theTV user manual).

# Never look at the laser beam inside the unit.

# Risk of product damage! Never play discs with

accessories such as disc stabilizer rings or disc

treatment sheets.

3 Switch theTV to the correct viewing

channel for this unit.

# Never put any objects other than discs into the disc

4 Press DISC.

compartment.

5 Press SYSTEM MENU.

6 Press / to select [Video Setup] in the

1 Press DISC to select the DISC source.

menu, then press

2 Press on the front panel.

7 Select [ComponentVideo], then press

» The disc tray opens.

8 Select [P-Scan], then press OK.

3 Place a disc onto the tray and press .

» The progressive setup is complete.

» Ensure that the label faces up.

4 Play starts automatically.

#ꢎ To stop play, press .

#ꢎ To pause or resume play, press

#ꢎ To skip to the previous/next title/

chapter/track, press / .

If play does not start automatically:

#ꢎ Select a title/chapter/track and then

press

Tip

# To play a locked DVD, enter the 4-digit parental control

password.

Use the disc menu

When you load a DVD/(S)VCD disc, a menu

may be displayed on theTV screen.

EN 15

Download from Www.Somanuals.com. All Manuals Search And Download.

To access or exit the menu manually:

Play from USB

1 Press DISC MENU.

!ꢀꢄꢅ$%&ꢅ'ꢋꢁꢂꢅ)ꢎꢆꢔ*ꢆꢍꢗꢅ%ꢀꢌꢁꢄꢀꢎꢅꢊ)*%ꢒꢅꢕꢃꢆꢁꢈꢄꢃꢅ

ꢊꢚꢃꢄꢉꢋꢀꢌꢅ;ꢖ<ꢅꢀꢌꢎꢔꢒ#

Note

With the PBC feature, you can playVCD

interactively according to the menu screen.

# Ensure that the USB device contains playable music,

pictures or video.

1 During play, press DISC MENU to enable/

disable PBC.

1 Insert the USB device.

» When PBC is enabled, the menu

screen is displayed.

» When PBC is disabled, normal play is

resumed.

Select an audio language

You can select an audio language on DVDs or

DiVx video.

1 During disc play, press AUDIO.

» The language options appear. If the

selected audio channels is unavailable,

the default disc audio channel is used.

2 Press USB to select the USB source.

Note

3 Press / to select a folder, then press OK

# For some DVDs, the language can only be changed

from the disc menu. Press DISC MENU to access the

menu.

ꢇꢈꢎꢃꢈꢉꢅꢕ$;

4 Press / ꢎꢇꢈꢎꢊꢂꢌꢂꢃꢇꢎꢆꢎꢅꢌꢂꢎ#ꢕꢈ$ꢎꢇ!ꢂꢎ#ꢈꢌꢜꢂꢕ;

5 Press

to start play.

#ꢎ To stop play, press .

#ꢎ To pause or resume play, press

Select a subtitle language

You can select a subtitle language on DVDs or

DivX® Ultra discs.

#ꢎ During play, press SUBTITLE.

#ꢎ ꢛꢈꢎꢊ"ꢄꢁꢎꢇꢈꢎꢇ!ꢂꢎꢁꢕꢂ@ꢄꢈꢔꢊꢑꢉꢂ}ꢇꢎꢅꢌꢂ)ꢎꢁꢕꢂꢊꢊꢎ

/ .

#ꢎ To return to the upper-level menu,

press DISC MENU, and then press

OK ꢇꢈꢎꢃꢈꢉꢅꢕ$;

Tip

# For some DVDs, the language can only be changed

from the disc menu. Press DISC MENU to access the

menu.

Play DivX video

~ꢈꢔꢎꢃꢆꢉꢎꢁꢌꢆꢍꢎꢄ@€ꢎꢅꢌꢂꢊꢎꢃꢈꢁꢄꢂꢜꢎꢈꢉꢇꢈꢎꢆꢎ`Hꢖꢑ

RW, recordable DVD or USB device.

1 Insert a disc or connect a USB device.

2 Select a source:

#ꢎ For discs, press DISC.

#ꢎ For USB devices, press USB.

16 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

3ꢎ ꢀꢂꢌꢂꢃꢇꢎꢆꢎꢅꢌꢂꢎꢇꢈꢎꢁꢌꢆꢍꢎꢆꢉꢜꢎꢁꢕꢂꢊꢊꢎ

Play control

#ꢎ To stop play, press .

#ꢎ To pause or resume play, press

=ꢃꢎꢃꢍꢁꢅꢄꢃꢇꢃꢆꢁ>ꢉꢂꢈꢕ]ꢃꢅꢇꢎꢆꢔꢅꢀꢇꢁꢋꢀꢌꢉ

1 During play, press MODE/DIM repeatedly

ꢇꢈꢎꢊꢂꢌꢂꢃꢇꢎꢆꢎꢕꢂꢁꢂꢆꢇꢎꢈꢁꢇꢄꢈꢉꢎꢈꢕꢎꢇ!ꢂꢎꢊ!ꢔ#]ꢂꢎꢁꢌꢆꢍꢎ

mode.

#ꢎ To change a subtitle language, press

SUBTITLE.

Note

#ꢎ To resume normal play, press MODE/

DIM repeatedly until no option is

displayed.

# You can only play DivX videos rented or purchased

through the DivX registration code of this unit.

# ꢀꢔ%ꢇꢄꢇꢌꢂꢎꢅꢌꢂꢊꢎ'ꢄꢇ!ꢎꢇ!ꢂꢎ#ꢈꢌꢌꢈ'ꢄꢉ/ꢎꢅꢌꢂꢉꢆ$ꢂꢎꢂ}ꢇꢂꢉꢊꢄꢈꢉꢊꢎ‚;ꢊꢕꢇ)ꢎ

.smi, .sub, .ssa, .ass) are supported but do not appear on

ꢇ!ꢂꢎꢅꢌꢂꢎꢉꢆ@ꢄ/ꢆꢇꢄꢈꢉꢎ$ꢂꢉꢔ;

# ꢛ!ꢂꢎꢊꢔ%ꢇꢄꢇꢌꢂꢎꢅꢌꢂꢉꢆ$ꢂꢎ!ꢆꢊꢎꢇꢈꢎ%ꢂꢎꢇ!ꢂꢎꢊꢆ$ꢂꢎꢆꢊꢎꢇ!ꢂꢎꢅꢌꢂꢎ

Repeat A-B (DVD/VCD/CD/MP3/

@JQꢒ

name of the video.

1 During music or video play, press A-B at

the start point.

2 Press A-B at the end point.

» The selected section starts to play

repeatedly.

)ꢎꢆꢔꢅJ)\>@JQ>ꢇꢋꢍꢁꢈꢄꢃꢅ\ꢎꢃꢉ

~ꢈꢔꢎꢃꢆꢉꢎꢁꢌꢆꢍꢎꢏꢋꢐꢑꢒꢏꢓꢑꢁꢄꢃꢇꢔꢕꢂꢎꢅꢌꢂꢊꢎꢃꢈꢁꢄꢂꢜꢎ

onto a CD-R/RW, recordable DVD or USB

device.

#ꢎ To cancel repeat play, press A-B again.

Note

1 Insert a disc or connect a USB device.

2 Select a source:

# The section A and B can be set only within the same

track/title.

#ꢎ For discs, press DISC.

#ꢎ For USB devices, press USB.

3 Press / to select a folder, then press OK

ꢇꢈꢎꢃꢈꢉꢅꢕ$;

Search forward/backward

4 Press / ꢎꢇꢈꢎꢊꢂꢌꢂꢃꢇꢎꢆꢎꢅꢌꢂꢎ#ꢕꢈ$ꢎꢇ!ꢂꢎ#ꢈꢌꢜꢂꢕ;

1 During play, press

repeatedly to

5 Press

to start play.

select a search speed.

#ꢎ To stop play, press .

#ꢎ To resume play at normal speed, press

#ꢎ To pause or resume play, press

#ꢎ ꢛꢈꢎꢊ"ꢄꢁꢎꢇꢈꢎꢇ!ꢂꢎꢁꢕꢂ@ꢄꢈꢔꢊꢑꢉꢂ}ꢇꢎꢅꢌꢂ)ꢎꢁꢕꢂꢊꢊꢎ

/ .

Search by time or chapter/track

number

1 During video/audio play, press GOTO

ꢔꢉꢇꢄꢌꢎꢆꢎꢇꢄ$ꢂꢎꢅꢂꢌꢜꢎꢈꢕꢎꢃ!ꢆꢁꢇꢂꢕꢑꢇꢕꢆꢃ"ꢎꢅꢂꢌꢜꢎꢄꢊꢎ

displayed.

#ꢎ To return to the upper-level menu,

press DISC MENU, and then press

OK ꢇꢈꢎꢃꢈꢉꢅꢕ$;

#ꢎ ꢈꢕꢎꢇ!ꢂꢎꢇꢄ$ꢂꢎꢅꢂꢌꢜ)ꢎꢂꢉꢇꢂꢕꢎꢇ!ꢂꢎꢁꢌꢆꢍꢎ

position in hours, minutes and

seconds.

#ꢎ ꢈꢕꢎꢇ!ꢂꢎꢃ!ꢆꢁꢇꢂꢕꢑꢇꢕꢆꢃ"ꢎꢅꢂꢌꢜ)ꢎꢂꢉꢇꢂꢕꢎꢇ!ꢂꢎ

chapter/track.

EN 17

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢎ Play starts automatically at your

selected point.

Change the audio channel

Note

Resume video play from last stopped

point

# This feature is only available forVCD/DivX play.

Note

1 During play, press AUDIO repeatedly to

select an audio channel available on the

# This feature is only available for DVD/VCD play.

disc:

#ꢎ Mono Left

#ꢎ Mono Right

#ꢎ Stereo

1 In stop mode and when the disc has not

been removed, press

To cancel resume mode and stop play

completely:

Select a camera angle

1 In stop mode, press .

Note

# This feature is only available for DVDs recorded with

multiple camera angles.

Play options

Display play information

1 During play, press ANGLE/PROG

repeatedly to select a camera angle.

1 During play, press DISPLAY/RDS

repeatedly to display play information.

Picture view options

Zoom in/out image

1 During video play, press (ZOOM)

repeatedly to zoom in/out the image.

#ꢎ When the image is zoomed in, you

Preview pictures

1 During play, press .

» The pictures in the current folder are

displayed.

can press

image.

to pan through the

2 Press / to select a picture from the

folder.

Slow-motion play

1 During video play, press (SLOW)

repeatedly to select a slow play option.

» The sound is muted.

» A thumbnail of the selected picture is

displayed in the right pane.

3 Press OK to start slideshow from the

selected picture.

» To resume play at normal speed, press

Rotate picture

1 During play, press / / / to rotate the

picture anti-clockwise/clockwise.

18 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢎ [All] – If the connected device supports

multi-channel audio formats, select this

option.

6 Adjust settings

[Night Mode]

1 Press SYSTEM MENU.

Make loud sound level softer and soft sound

level louder so that you can watch the DVD

movies at a low volume, without disturbing

others.

2 Select a setup page.

3 Select an option and then press

4 Select a setting and then press OK.

#ꢎ [On]ꢎNꢎꢂꢉ&ꢈꢍꢎ(ꢔꢄꢂꢇꢎ@ꢄꢂ'ꢄꢉ/ꢎꢆꢇꢎꢉꢄ/!ꢇꢎ‚„ꢊꢎ

only).

#ꢎ [Off] – enjoy surround sound with its full

dynamic range.

#ꢎ To return to the previous menu, press

#ꢎ To exit the menu, press SYSTEM

MENU.

Video setup

General setup

On the [Video Setup] page, you can set the

following options:

On the [General Setup] page, you can set the

following options:

[TV System]

[OSD language]

Change this setting if the video does not appear

correctly. By default, this setting matches the

most common setting forTVs in your country.

#ꢎ [NTSC] - ForTV with NTSC color system.

#ꢎ [PAL] - ForTV with PAL color system.

#ꢎ [Multi] - ForTV that is compatible with

both PAL and NTSC.

Select the preferred language for on-screen

display.

[DivX®VOD Code]

Display the DivX® registration code.

Tip

# Enter this DivX registration code when you rent or

purchase video from http://vod.divx.com/.The DivX

videos rented or purchased through the DivX®VOD

(Video On Demand) service can be played only on the

device to which it is registered.

[TV Display]

TheTV format determines the aspect ratio of

display according to the type ofTV you have

connected.

4:3 Pan Scan (PS)

4:3 Letter Box (LB)

16:9 (Wide Screen)

Audio setup

#ꢎ [4:3 Pan Scan] – For 4:3 screenTV: full-

height display with the trimmed sides.

#ꢎ [4:3 Letter Box] – For 4:3 screenTV:

wide-screen display with black bars on the

top and bottom of the screen.

#ꢎ [Wide Screen] – For wide-screenTV:

display ratio 16:9.

On the [Audio Setup] page, you can set the

following options:

[Digital Output]

Select audio formats supported by the

connected device.

#ꢎ [Off] –Turn off the digital output.

#ꢎ [PCM] – If the connected device cannot

decode multichannel audio, select this

option.

EN 19

Download from Www.Somanuals.com. All Manuals Search And Download.

[Picture Setting]

[Parental Control]

Customize picture color settings.

Restricts access to discs that are unsuitable for

children.These types of discs must be recorded

with ratings.

[ComponentVideo]

Set the video output according to the video

connection. If the composite connection is used,

ꢇ!ꢄꢊꢎꢊꢂꢇꢇꢄꢉ/ꢎꢄꢊꢎꢉꢈꢇꢎꢕꢂ(ꢔꢄꢕꢂꢜ;

Press OK.

Select a rating level, then press OK.

Press the numeric keys to enter the password.

#ꢎ [S-VIDEO] – If the S-Video connection is

used, select this option.

#ꢎ [Interlaced] – For ordinaryTV: turn on the

interlace mode.

Note

#ꢎ [P-Scan] – For progressive scanTV: turn on

the progressive scan mode.

# Rated discs above the level you set in [Parental

Control]ꢎꢕꢂ(ꢔꢄꢕꢂꢎꢆꢎꢁꢆꢊꢊ'ꢈꢕꢜꢎꢇꢈꢎ%ꢂꢎꢁꢌꢆꢍꢂꢜ;

# The ratings are country-dependent.To allow all discs to

play, select [8.Adult].

# Some discs have ratings printed on them but are not

recorded with ratings.This function has no effect on

such discs.

Preferences

On the [Preferences] page, you can set the

following options:

[Password]

This setting allows you to change the password

for parental control.The default password is

0000.

[Audio]

Select the preferred audio language for disc

play.

1) Press the numeric keys to enter ‘0000’ or

your last set password at [Old Password]ꢎꢅꢂꢌꢜ;

2) Enter the new password at [New

Password]ꢎꢅꢂꢌꢜ;

[Subtitle]

Select the preferred subtitle language for disc

play.

[Disc Menu]

Select the preferred disc menu language.

3) Enter the new password again at ^%ꢀꢌ\ꢄꢑꢅ

new password]ꢎꢅꢂꢌꢜ;

4) Press OK to exit the menu.

Note

# If the language you have set is not available on the disc,

the disc uses its own default language.

Note

# For some discs, the subtitle/audio language can only be

# If you forget the password, enter ‘0000’ before you set

a new password.

changed from the disc menu.

[DivX Subtitle]

Select a character set that supports the DivX

subtitle.

[Version Info]

Display the software version of this apparatus.

[Default]

Resets all the settings of this unit to factory

default, except for the password and parental

settings.

Note

# †ꢉꢊꢔꢕꢂꢎꢇ!ꢆꢇꢎꢇ!ꢂꢎꢊꢔ%ꢇꢄꢇꢌꢂꢎꢅꢌꢂꢎ!ꢆꢊꢎꢇ!ꢂꢎꢂ}ꢆꢃꢇꢎꢊꢆ$ꢂꢎꢅꢌꢂꢎ

ꢉꢆ$ꢂꢎꢆꢊꢎꢇ!ꢂꢎ$ꢈ@ꢄꢂꢎꢅꢌꢂ;ꢎꢘ#ꢎ#ꢈꢕꢎꢂ}ꢆ$ꢁꢌꢂꢎꢇ!ꢂꢎꢅꢌꢂꢎꢉꢆ$ꢂꢎꢈ#ꢎ

the movie is ‘Movie.avi’, then you will need to name the

ꢇꢂ}ꢇꢎꢅꢌꢂꢎRꢏꢈ@ꢄꢂ;ꢊꢔ%SꢎꢈꢕꢎRꢏꢈ@ꢄꢂ;ꢊꢕꢇS;ꢎ

20 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Tune to FM

radio stations

Program radio stations

manually

Note

1 Ensure that you have connected and fully

# You can program a maximum of 20 preset radio

stations.

extended the supplied FM antenna.

2 Press TUNER.

3 Press and hold / .

1 Tune to a radio station.

4ꢎ ꢒ!ꢂꢉꢎꢇ!ꢂꢎ#ꢕꢂ(ꢔꢂꢉꢃꢍꢎꢄꢉꢜꢄꢃꢆꢇꢄꢈꢉꢎꢊꢇꢆꢕꢇꢊꢎꢇꢈꢎ

2 Press ANGLE/PROG to activate

change, release the button.

programming.

» The FM tuner tunes to a station with

strong reception automatically.

3 Press / to allocate a number from

1 to 20 to this radio station, then press

ANGLE/PROGꢎꢇꢈꢎꢃꢈꢉꢅꢕ$;

5 Repeat steps 3-4 to tune to more stations.

» ꢛ!ꢂꢎꢁꢕꢂꢊꢂꢇꢎꢉꢔ$%ꢂꢕꢎꢆꢉꢜꢎꢇ!ꢂꢎ#ꢕꢂ(ꢔꢂꢉꢃꢍꢎ

of the preset station are displayed.

To tune to a weak station:

Press / ꢎꢕꢂꢁꢂꢆꢇꢂꢜꢌꢍꢎꢔꢉꢇꢄꢌꢎꢍꢈꢔꢎꢅꢉꢜꢎꢈꢁꢇꢄ$ꢆꢌꢎ

reception.

4 Repeat the above steps to program other

stations.

Program radio stations

automatically

Note

# To overwrite a programmed station, store another

station in its place.

Note

# You can program a maximum of 20 preset radio

stations.

Tune to a preset radio station

1 Press

to select a preset number to

1 ^Press/ to select a preset number

start programing.

that you want.

2 Press and hold ANGLE/PROG for

2 seconds to activate automatic

programming.

Tip

# You can also use the numerical keypad to select a

preset station directly.

» [AUTO]ꢎ‚ꢆꢔꢇꢈ‰ꢎꢄꢊꢎꢜꢄꢊꢁꢌꢆꢍꢂꢜꢎ%ꢕꢄꢂ]ꢍ;

» All available stations are programmed

in the order of waveband reception

strength.

» The last programed radio station is

broadcast automatically.

EN 21

Download from Www.Somanuals.com. All Manuals Search And Download.

Select automatic loudness control

8 Adjust volume

level and sound

effect

Automatic loudness control increases the treble

and bass effect at low volume levels (the higher

the volume, the lower the treble and bass

levels).

1 To turn on automatic loudness control,

press LOUD/DBB during play until the

loudness icon is displayed.

Adjust volume level

#ꢎ To turn off automatic loudness

control, press LOUD/DBB until the

loudness icon disappears.

1 ^{During play, press VOL +/- to increase/}

decrease the volume level.

Mute sound

Select a sound effect

1 ^{During play, press MUTE to mute/unmute}

Note

sound.

# You cannot use different sound effects at the same

time.

Listen through headphone

1 ^{Plug a headphone into the}socket on

Select a preset sound effect

the unit.

1 During play, press DSC repeatedly to

select:

#ꢎ [Classic]

#ꢎ [Rock]

#ꢎ [Jazz]

#ꢎ [Pop]

#ꢎ [FLAT]ꢎ‚]ꢆꢇ‰

Enhance bass

1 To turn on bass enhancement, press

LOUD/DBB repeatedly during play until

the DBB logo is displayed.

#ꢎ To turn off bass enhancement, press

LOUD/DBB repeatedly until the DBB

logo disappears.

22 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

» The unit turns on automatically at

the set time and switches to the last

selected source.

9 Other features

» To deactivate the alarm timer, select

Activate demonstration mode

[OFF] (off) at step 6.

You can see an overview of all features.

1 In standby mode, press on the main unit

to activate the demonstration mode.

» A demonstration of major available

features starts.

Set the sleep timer

1 ^{When the unit is turned on, press SLEEP/}

TIMER repeatedly to select a set period of

time (in minutes).

To deactivate the demonstration mode:

» The unit turns off automatically after

the set period of time.

1 Press on the main unit again.

Adjust brightness of display

panel

Connect other devices

1 ^{In standby mode, press MODE/DIM}

repeatedly to select different levels of

brightness for the display panel.

Listen to an audio player

You can listen to audio player through this unit.

Set the alarm timer

1 ^{Ensure that you have set the clock}

correctly.

2 In standby mode, press and hold SLEEP/

TIMER.

» The hour digits are displayed and begin

to blink.

3 Press +VOL - to set the hour, then press

SLEEP/TIMER again.

» The minute digits are displayed and

begin to blink.

1 Connect the audio player.

#ꢎ For audio players with red/white

audio output sockets:

4 Press +VOL - to set the minute.

5 Press SLEEP/TIMERꢎꢇꢈꢎꢃꢈꢉꢅꢕ$;

» [OFF] (off) begins to blink.

Connect a red/white audio cable (not

supplied) to the AUX IN L/R sockets

and to the audio output sockets on

the audio player.

6 To activate the wake-up timer, press +VOL

- to select [ON] (on) while [OFF] (off) is

blinking.

» A clock icon appears on the display.

EN 23

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢎ For audio players with headphone

sockets:

10 Product

information

Connect a 3.5mm audio cable (not

supplied) to the MP3 LINK socket

and to the headphone socket on the

audio player.

2 Select the MP3 Link/AUX source.

Note

3 Start play on the audio player.

# Product information is subject to change without prior

notice.

Record to a digital recorder

You can record audio from this unit to a digital

recorder.

=ꢇꢃꢍꢋ\ꢍꢆꢁꢋꢀꢌꢉ

Qꢑꢇꢎꢋ\ꢃꢄ

Rated Output Power 2X20W RMS

ꢕꢂ(ꢔꢂꢉꢃꢍꢎꢖꢂꢊꢁꢈꢉꢊꢂ 20 -20000 Hz, 3dB

Signal to Noise Ratio >67dB

Aux Input

1V RMS 20kohm

Disc

LaserType

Disc Diameter

Video Decoding

Semiconductor

12cm/8cm

MPEG-1 / MPEG-2 /

DivX

1 Connect a coaxial cable (not supplied) to:

#ꢎ the COAXIAL socket

Video DAC

Signal System

Video Format

Video S/N

Audio DAC

Total Harmonic

Distortion

12Bits

PAL / NTSC

4:3 / 16:9

>48dB

24Bits / 96kHz

<1% (1 kHz)

#ꢎ the digital input socket on the digital

recorder

2 Play audio to be recorded.

3 Begin to record on the digital recorder

(see the digital recorder user manual).

ꢕꢂ(ꢔꢂꢉꢃꢍꢎ

4Hz - 20kHz (44.1kHz)

4Hz - 22kHz (48kHz)

4Hz - 24kHz (96kHz)

>67dBA

Response

S/N Ratio

24 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

`ꢈꢌꢃꢄꢅꢊ!Jꢒ

Tuning Range

Tuning grid

Sensitivity - Mono, 26dB

S/N Ratio

Sensitivity - Stereo, 46dB >43 dBf

S/N Ratio

Search Selectivity

Total Harmonic Distortion <3%

Supported disc formats

87.5 - 108MHz

50KHz

<22 dBf

#ꢎ DigitalVideo Discs (DVDs)

#ꢎ Video CDs (VCDs)

#ꢎ SuperVideo CDs (SVCDs)

#ꢎ DigitalVideo Discs + Rewritable

(DVD+RW)

#ꢎ Compact Discs (CDs)

>28dBf

#ꢎ ꢋꢄꢃꢇꢔꢕꢂꢎ‚Jꢈꢜꢆ")ꢎ‘ꢋ†ꢙ‰ꢎꢅꢌꢂꢊꢎꢈꢉꢎ`ꢖ‚ꢒ‰

#ꢎ DivX(R) disc on CD-R(W):

#ꢎ DivX 3.11, 4.x and 5.x

Signal to Noise Ratio

>50dB

#ꢎ WMA

Supported MP3-CD formats:

#ꢎ ISO 9660

Speakers

#ꢎ Max. title/album name: 12 characters

#ꢎ Max. title number plus album: 255.

#ꢎ Max. nested directory: 8 levels.

#ꢎ Max. album number: 32.

Speaker Impedance

Speaker Driver

Sensitivity

8ohm

4” Full range

>82dB/m/W

#ꢎ Max. MP3 track number: 999.

#ꢎ ꢀꢔꢁꢁꢈꢕꢇꢂꢜꢎꢊꢆ$ꢁꢌꢄꢉ/ꢎ#ꢕꢂ(ꢔꢂꢉꢃꢄꢂꢊꢎ#ꢈꢕꢎꢏꢋꢐꢎ

disc: 32 kHz, 44.1 kHz, 48 kHz.

#ꢎ Supported Bit-rates of MP3 disc are: 32, 64,

96, 128, 192, 256 (kbps).

#ꢎ The following formats are not supported:

#ꢎ Files like *.VMA, *.AAC, *.DLF, *.M3U,

#ꢎ *.PLS, *.WAV

General information

AC power

110 - 240V,

~50/60 Hz

25W

Operation Power

Consumption

CompositeVideo

Output

1.0Vp-p, 75ohm

#ꢎ Non-English Album/Title name

#ꢎ Discs recorded in Joliet format

#ꢎ MP3 Pro and MP3 with ID3 tag

Coaxial Output

0.5Vpp 0.1Vpp

75ohm

Headphone Output

USB Direct

Dimensions

- Main Unit

(W x H x D)

- Speaker Box

(W x H x D)

Weight

- With Packing

- Main Unit

- Speaker Box

2X15mW 32ohm

Version 2.0

USB playability information

220 x 90 x 240mm

Compatible USB devices:

#ꢎ “ꢀ*ꢎ]ꢆꢊ!ꢎ$ꢂ$ꢈꢕꢍꢎ‚“ꢀ*ꢎ”;•ꢎꢈꢕꢎ“ꢀ*–;–‰

#ꢎ “ꢀ*ꢎ]ꢆꢊ!ꢎꢁꢌꢆꢍꢂꢕꢊꢎ‚“ꢀ*ꢎ”;•ꢎꢈꢕꢎ“ꢀ*–;–‰

#ꢎ $ꢂ$ꢈꢕꢍꢎꢃꢆꢕꢜꢊꢎ‚ꢕꢂ(ꢔꢄꢕꢂꢊꢎꢆꢉꢎꢆꢜꢜꢄꢇꢄꢈꢉꢆꢌꢎꢃꢆꢕꢜꢎ

reader to work with this apparatus)

140 x 220 x 160 mm

6 kg

1.65 kg

2 x 1.5 kg

Supported formats:

#ꢎ “ꢀ*ꢎꢈꢕꢎ$ꢂ$ꢈꢕꢍꢎꢅꢌꢂꢎ#ꢈꢕ$ꢆꢇꢎꢓꢛ–”)ꢎꢓꢛ–—)ꢎ

FAT32 (sector size: 512 bytes)

#ꢎ MP3 bit rate (data rate): 32-320 Kbps and

variable bit rate

EN 25

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢎ WMA v9 or earlier

#ꢎ Directory nesting up to a maximum of 8

levels

#ꢎ Number of albums/ folders: maximum 99

#ꢎ Number of tracks/titles: maximum 999

#ꢎ ID3 tag v2.0 or later

#ꢎ File name in Unicode UTF8 (maximum

length: 128 bytes)

11 Troubleshooting

Caution

# Never remove the casing of this unit.

Unsupported formats:

To keep the warranty valid, never try to repair

the system yourself.

#ꢎ Empty albums: an empty album is an album

ꢇ!ꢆꢇꢎꢜꢈꢂꢊꢎꢉꢈꢇꢎꢃꢈꢉꢇꢆꢄꢉꢎꢏꢋꢐꢑꢒꢏꢓꢎꢅꢌꢂꢊ)ꢎꢆꢉꢜꢎ

is not be shown in the display.

If you encounter problems when using this unit,

ꢃ!ꢂꢃ"ꢎꢇ!ꢂꢎ#ꢈꢌꢌꢈ'ꢄꢉ/ꢎꢁꢈꢄꢉꢇꢊꢎ%ꢂ#ꢈꢕꢂꢎꢕꢂ(ꢔꢂꢊꢇꢄꢉ/ꢎ

service. If the problem remains unsolved, go to

the Philips web site (www.Philips.com/support).

When you contact Philips, ensure that your

unit is nearby and the model number and serial

number are available.

#ꢎ “ꢉꢊꢔꢁꢁꢈꢕꢇꢂꢜꢎꢅꢌꢂꢎ#ꢈꢕ$ꢆꢇꢊꢎꢆꢕꢂꢎꢊ"ꢄꢁꢁꢂꢜ;ꢎꢈꢕꢎ

example,Word documents (.doc) or MP3

ꢅꢌꢂꢊꢎ'ꢄꢇ!ꢎꢂ}ꢇꢂꢉꢊꢄꢈꢉꢎ;ꢜꢌ#ꢎꢆꢕꢂꢎꢄ/ꢉꢈꢕꢂꢜꢎꢆꢉꢜꢎ

not played.

#ꢎ ꢓꢓ`)ꢎꢒꢓ„)ꢎꢋ`ꢏꢎꢆꢔꢜꢄꢈꢎꢅꢌꢂꢊ

#ꢎ ꢖꢏꢎꢁꢕꢈꢇꢂꢃꢇꢂꢜꢎꢒꢏꢓꢎꢅꢌꢂꢊꢎ‚;'ꢆ@)ꢎ;$šꢆ)ꢎ

.m4p, .mp4, .aac)

No power

Ensure that the AC cord of the apparatus

is connected properly.

Ensure that there is power at the AC

outlet.

As a power-saving feature, the system

switches off automatically 15 minutes after

track play reaches the end and no control

is operated.

#ꢎ ꢒꢏꢓꢎꢅꢌꢂꢊꢎꢄꢉꢎ›ꢈꢊꢊꢌꢂꢊꢊꢎ#ꢈꢕ$ꢆꢇ

No disc detected

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at

the lens has cleared.

Replace or clean the disc.

“ꢊꢂꢎꢆꢎꢅꢉꢆꢌꢄ™ꢂꢜꢎ`ꢎꢈꢕꢎꢃꢈꢕꢕꢂꢃꢇꢎ#ꢈꢕ$ꢆꢇꢎꢜꢄꢊꢃ;

No picture

Check the video connection.

Turn on theTV to the correctVideo-In

channel.

Progressive scan is activated but theTV

does not support progressive scan.

Black and white or distorted picture

The disc does not match theTV color

system standard (PAL/NTSC).

Sometimes a slight picture distortion may

appear.This is not a malfunction.

26 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Clean the disc.

A distorted picture may appear during

progressive scan setup.

disc play reaches the end and no control is

operated.

Poor radio reception

The aspect ratio of theTV screen cannot be

changed even though you have set theTV

display format.

Increase the distance between the unit and

yourTV orVCR.

Fully extend the FM antenna.

Connect an outdoor FM antenna instead.

ꢛ!ꢂꢎꢆꢊꢁꢂꢃꢇꢎꢕꢆꢇꢄꢈꢎꢄ#ꢎꢅ}ꢂꢜꢎꢈꢉꢎꢇ!ꢂꢎꢌꢈꢆꢜꢂꢜꢎ

DVD disc.

The aspect ratio may not be changed for

someTV systems.

Audio or subtitle languages cannot be set

The disc is not recorded with sound or

subtitles in multiple languages.

No sound or poor sound

The audio or subtitle language setting is

prohibited on the disc.

Adjust the volume.

Disconnect the headphones.

Check that the speakers are connected

correctly.

%ꢆꢌꢌꢀꢁꢅꢏꢋꢉꢇꢎꢆꢔꢅꢉꢀꢑꢃꢅ\ꢎꢃꢉꢅꢋꢌꢅ|=*ꢅꢏꢃꢚꢋꢍꢃ

ꢛ!ꢂꢎꢉꢔ$%ꢂꢕꢎꢈ#ꢎ#ꢈꢌꢜꢂꢕꢊꢎꢈꢕꢎꢅꢌꢂꢊꢎꢄꢉꢎꢇ!ꢂꢎ“ꢀ*ꢎ

device has exceeded a certain limit.This

phenomenon is not a malfunction.

ꢛ!ꢂꢎ#ꢈꢕ$ꢆꢇꢊꢎꢈ#ꢎꢇ!ꢂꢊꢂꢎꢅꢌꢂꢊꢎꢆꢕꢂꢎꢉꢈꢇꢎ

supported.

Check if the stripped speaker wires are

clamped.

Remote control does not work

*ꢂ#ꢈꢕꢂꢎꢍꢈꢔꢎꢁꢕꢂꢊꢊꢎꢆꢉꢍꢎ#ꢔꢉꢃꢇꢄꢈꢉꢎ%ꢔꢇꢇꢈꢉ)ꢎꢅꢕꢊꢇꢎ

select the correct source with the remote

control instead of the main unit.

Reduce the distance between the remote

control and the unit.

Insert the battery with its polarities (+/–

signs) aligned as indicated.

Replace the battery.

USB device not supported

The USB device is incompatible with the unit.

Try another one.

Timer does not work

Set the clock correctly.

Switch on the timer.

Clock/timer setting erased

Aim the remote control directly at the

sensor on the front of the unit.

Power has been interrupted or the power

cord has been disconnected.

Reset the clock/timer.

Disc does not play

Insert a readable disc and ensure that the

label side faces up.

Check the disc type, color system and

regional code. Check for any scratches or

smudges on the disc.

Press SYSTEM MENU to exit the system

setup menu.

Disable the password for parental control

or change the rating level.

Moisture has condensed inside the system.

Remove the disc and leave the system

turned on for about an hour. Disconnect

and reconnect the AC power plug, and

then turn on the system again.

As a power-saving feature, the system

turns off automatically 15 minutes after

EN 27

Download from Www.Somanuals.com. All Manuals Search And Download.

MCD122_98_UM_V3.0

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Baby Monitor SBC SC469 User Manual
Philips Car Speaker HTL2100 User Manual
Philips Cordless Telephone SE6301S User Manual
Philips Thermometer SCH540 02 User Manual
Pioneer Flat Panel Television PDP LX508A User Manual
Polycom Car Speaker 1725 11530 200 Rev A1 User Manual
Polycom Switch AS 2000 User Manual
Powerware Power Supply ST 2400S User Manual
Precor Fitness Equipment Ab X100 User Manual
Pride Mobility Mobility Aid INFMANU3769 User Manual