Philips Car Satellite TV System 32PFL3705H User Manual

Register your product and get support at  
40PFL6605H  
32PFL6605H  
40PFL6505H  
32PFL6505H  
40PFL6405H  
32PFL6405H  
46PFL5805H  
40PFL5805H  
52PFL5605H  
46PFL5605H  
40PFL5605H  
40PFL5605K  
32PFL5605H  
42PFL5405H  
37PFL5405H  
32PFL5405H  
32PFL3805H  
32PFL3705H  
EN User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact information  
België/ Belgique  
0800 80 190 Gratis / Gratuit  
Latvia  
52737691 local  
Sverige  
08 5792 9100 Lokalsamtal  
ß
Lithuania  
67228896 local  
Suisse/Schweiz/Svizzera  
0800 002 050  
България  
Schweizer Festnetztarif/Tarif réseau  
fixe France  
00800 11 544 24  
Luxemburg/Luxembourg  
40 6661 5644  
Česká republika  
Suomi  
Ortsgespräch/Appel local  
800142840 Bezplatný hovor  
09 2311 3415 paikallispuhelu  
Magyarország  
Danmark  
Türkiye  
0680018189 Ingyenes hívás  
3525 8759 Lokalt opkald  
0800 261 3302 Şehiriçi arama  
ß
Nederland  
United Kingdom  
0800 0230076 Gratis nummer  
Deutschland  
General No: 0800 331 6015 free  
General National Rate No:  
0870 911 0036 National rate  
0800 000 7520 gebührenfreier Anruf  
Norge  
22 70 81 11 Lokalsamtale  
ß
Ελλάδα  
0 0800 3122 1280  
Κλήση χωρίς χρέωση  
Українська  
0-800-500-697  
Österreich  
0800 180 016  
Polska  
España  
00800-311-13-18  
Pozosta?e produkty RTV oraz AGD  
900 800 655Teléfono local gratuito  
solamente para clientes en España  
ß
Portugal  
800780903 Chamada Grátis  
Estonia  
6008600 kohalik kõne tariifi  
Россия  
(495) 961-1111  
France  
8-800-200-0880  
0805 025 510 numéro sans frais  
(бесплатный звонок по России)  
ß
România  
Hrvatska  
0800-894910 Apel gratuit  
0318107125 Apel local  
0800 222778 free  
Ireland  
01 601 1777  
Србија  
+381 114 440 841 Lokalni poziv  
Italia  
Slovensko  
0800 004537 Bezplatný hovor  
800 088774 NumeroVerde  
Қазақстан  
+7 727 250 66 17 local  
Slovenija  
00386 12 80 95 00 lokalni klic  
This information is correct at the time of print. For updated information, see www.philips.com/support.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Get started  
TV Tour  
The remote control  
To open or close the Home menu  
.
In the Home menu, you can access  
connected devices, picture and sound  
settings, and other useful features.  
To adjust the volume.  
To open or close the Browse menu  
.
In the Browse menu, you can access  
Teletext, the channel list, or the electronic  
Program Guide (EPG)*.  
To switch TV channels.  
*EPG is not available in all countries.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Back  
.
To open or close the Options menu  
.
To return to the previous TV channel or  
menu. Press and hold to return to watching  
TV.  
Options menus offer convenient settings  
related to what is on-screen.  
To open or close the Experience menu  
.
Red  
In the Experience menu, you can access a  
range of frequently used settings.  
To select the red option, access digital  
Interactive TV services*, or watch TV  
demonstration clips.  
*Available on certain models only.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blue  
Green  
To select the blue option or to open the  
Widgets*.  
*Available on certain models only.  
To select the green option or the  
energy-efficient settings.  
Read more about the remote control in  
Help > Use your TV > Remote control >  
Overview (Page 15).  
Alternatively, find the answer in Search for...  
Press  
to select the next TV tour.  
The TV menus  
Yellow  
To select the yellow option.  
Let's learn more about these frequently used  
menus:  
the Home menu  
the Browse menu  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
the Options menu  
the Experience menu  
In the Options menu , you can select  
settings related to what is shown on screen.  
For example, while you watch a channel, you  
can mark it as a favorite.  
In the Home menu , you can select the  
source to watch, such as a TV channel, or  
movies from a connected DVD player or  
USB flash drive. You can also add a new  
device or access the [Setup] menu for more  
settings.  
In the Experience menu , you can quickly  
adjust Ambilight*, picture, and sound  
settings.  
You can select the ideal picture setting for  
movies, games, or music. Or you can change  
the picture format of the on-screen image.  
You can even change the surround settings  
for the TV speakers.  
In the Browse Menu , you can access  
Teletext, the channel list, or the electronic  
Program Guide (EPG)*.  
*EPG is not available in all countries.  
*Available on certain models only.  
You can also find the answer in Search for...  
Press  
to select the next TV tour.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
The HDMI connection offers the best  
picture and sound quality.  
Connect devices  
If you connect a device to this TV, access the  
Home menu to add it.  
Press  
> [Add your devices], then follow  
the on-screen instructions. Ensure that you  
select the correct TV connector which the  
device is connected to. Read more in Help >  
Use your TV > Basic TV Menus > Add  
your devices (Page 18).  
If you connect an EasyLink (HDMI-CEC)  
compliant device to the TV, it is  
automatically added to the Home menu.  
Access the Home menu and select the  
newly added device icon. Read more in Help  
> Connect the TV> Use Philips EasyLink  
(Page 51).  
Connect DVD players, Blu-ray Disc players,  
or game consoles through HDMI.  
In Help > Connect the TV (Page 38), you can learn to connect the most common devices through  
illustrations, for example:  
a digital HD receiver, connected with  
an HDMI cable, playing HD content  
from a cable or satellite operator  
a HD channel on your DVB-C network  
a HD game console (for example,  
X-Box 360 or PlayStation 3), connected  
with an HDMI cable, playing a HD  
game  
High Definition TV  
You can watch High Definition (HD)  
programs in HD picture quality.  
If you watch non-HD programs, the picture  
quality will be similar to non-HD TVs.  
Your TV can display HD video content from:  
a Blu-ray disc player, connected with a  
HDMI cable, playing a Blu-ray disc  
an upscaling DVD player, connected  
with a HDMI cable, playing a DVD disc  
an over-the-air HD broadcaster  
(DVB-T MPEG4)  
HD video clip  
To experience the stunning sharpness and  
picture quality of HD TV, you can watch the  
High Definition video clip from the Home  
menu. Press  
demos] (on the second page of the setup  
> [Setup] > [Watch  
menu).  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact your dealer for more information.  
Risk of short circuit or fire!  
Go to www.philips.com/support to find  
Never expose the remote control or  
batteries to rain, water or excessive  
heat.  
FAQs that list the HD channels or providers  
in your country.  
Avoid force coming onto power plugs.  
Loose power plugs can cause arcing or  
fire.  
Important  
Risk of injury or damage to the TV!  
Congratulations  
NonPublish  
Two people are required to lift and  
carry a TV that weighs more than  
25kg/55lbs.  
Congratulations on your purchase, and  
welcome to Philips! To fully benefit from the  
support that Philips offers, register your TV  
When stand mounting the TV, use only  
the supplied stand. Secure the stand to  
the TV tightly. Place the TV on a flat,  
level surface that can support the  
combined weight of the TV and the  
stand.  
Safety  
NonPublish  
Read and understand all instructions before  
you use your TV. If damage is caused by  
failure to follow instructions, the warranty  
does not apply.  
When wall mounting the TV, use only a  
wall mount that can support the weight  
of the TV. Secure the wall mount to a  
wall that can support the combined  
weight of the TV and wall mount.  
Koninklijke Philips Electronics N.V. bears  
no responsibility for improper wall  
mounting that results in accident, injury  
or damage.  
Before you connect the TV to the  
power outlet, ensure that the power  
voltage matches the value printed on  
the back of the TV. Never connect the  
TV to the power outlet if the voltage is  
different.  
Risk of electric shock or fire!  
Never expose the TV to rain or water.  
Never place liquid containers, such as vases,  
near the TV. If liquids are spilt on or into the  
TV, disconnect the TV from the power  
outlet immediately. Contact Philips  
Consumer Care to have the TV checked  
before use.  
Never insert objects into the ventilation  
slots or other openings on the TV.  
When the TV is swivelled ensure that  
no strain is exerted on the power cord.  
Strain on the power cord can loosen  
connections and cause arcing.  
Risk of injury to children!  
Follow these precautions to prevent the TV  
from toppling over and causing injury to  
children:  
Never place the TV, remote control or  
batteries near naked flames or other  
heat sources, including direct sunlight.  
To prevent the spread of fire, keep  
candles or other flames away from the  
TV, remote control and batteries at all  
times.  
Never place the TV on a surface  
covered by a cloth or other material  
that can be pulled away.  
Ensure that no part of the TV hangs  
over the edge of the mounting surface.  
Never place the TV on tall furniture,  
such as a bookcase, without anchoring  
both the furniture and TV to the wall  
or a suitable support.  
Educate children about the dangers of  
climbing on furniture to reach the TV.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Risk of overheating!  
Avoid stationary images as much as  
possible. Stationary images are images  
that remain onscreen for extended  
periods of time. Stationary images  
include onscreen menus, black bars,  
time displays, etc. If you must use  
stationary images, reduce screen  
contrast and brightness to avoid screen  
damage.  
Never install the TV in a confined  
space. Always leave a space of at least 4  
inches around the TV for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on the TV.  
Risk of injury, fire or power cord damage!  
Never place the TV or any objects on  
the power cord.  
To easily disconnect the TV power  
cord from the power outlet, ensure  
that you have full access to the power  
cord at all times.  
When you disconnect the power cord,  
always pull the plug, never the cable.  
Disconnect the TV from the power  
outlet and aerial before lightning  
storms. During lightning storms, never  
touch any part of the TV, power cord  
or aerial cable.  
End of use  
NonPublish  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Risk of hearing damage!  
Avoid using earphones or headphones at  
high volumes or for prolonged periods of  
time.  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European  
Directive 2002/96/EC. Please inform yourself  
about the local separate collection system  
for electrical and electronic products.  
Low temperatures  
If the TV is transported in temperatures  
below 5°C/41°F, unpack the TV and wait  
until the TV temperature matches room  
temperature before connecting the TV to  
the power outlet.  
Screen care  
NonPublish  
Risk of damage to the TV screen!  
Never touch, push, rub or strike the  
screen with any object.  
Unplug the TV before cleaning.  
Clean the TV and frame with a soft  
damp cloth. Never use substances such  
as alcohol, chemicals or household  
cleaners on the TV.  
Please act according to your local rules and  
do not dispose of your old products with  
your normal household waste. Correct  
disposal of your old product helps to  
prevent potential negative consequences for  
the environment and human health.  
To avoid deformations and color fading,  
wipe off water drops as soon as  
possible.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Built-in energy efficient settings  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste. Please inform yourself about the local  
rules on separate collection of batteries  
because correct disposal helps to prevent  
negative consequences for the  
Low standby power consumption: The  
class-leading and highly-advanced  
power circuitry brings down the power  
consumption of the TV to an extremely  
low level, without losing out on the  
constant standby functionality.  
environmental and human health.  
Dedicated power switch: Completely  
cut-off power to the TV with the  
dedicated power switch located on the  
bottom of the set.  
Advanced power management: The  
advanced power management of this  
TV ensures the most efficient use of its  
energy. To view how your personalized  
TV settings affect the TV's relative  
power consumption, press  
and  
select [Setup] > [Watch demos] >  
[Active Control].  
Environmental efforts  
This TV has been awarded the European  
Union Ecolabel for its environmental  
qualities.  
We continually focus on lowering the  
environmental impact of our innovative  
consumer products. We aim our efforts  
towards making environmental  
improvements during manufacturing,  
including reduction of harmful substances,  
promoting energy efficient use, end-of-life  
instructions and product recycling.  
A TV that is awarded the Ecolabel, contains  
energy efficient features.  
To access energy saving settings whilst  
watching TV, press the green button on the  
remote control.  
These energy efficient settings include:  
Energy saving picture settings: To  
apply a combination of picture settings  
which reduces energy consumption,  
press the green button and select  
[Energy saving] smart setting  
Ambient light sensor: To save energy,  
the built-in Ambient light sensor lowers  
the brightness of the TV screen when  
the surrounding light darkens.  
Mute screen: Turns off the TV display.  
Other functions, including sound,  
continue to operate normally. 'Muting'  
the screen saves energy if you just want  
to listen to audio from the TV.  
Thanks to our environmental efforts, this TV  
is awarded the European Ecolabel.  
See Setup the TV > Change other settings  
> Energy efficient settings (Page 35) for  
more information.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Find detailed information on standby energy  
consumption, warranty policy, spare parts  
and recycling of this TV at the Philips website  
for your country at www.philips.com.  
To prevent damage to cables and  
connectors, be sure to leave a clearance of  
at least 5.5cm/2.2" from the back of the TV.  
For 32 inch to 40 inch TVs (For PFL6XX5  
only):  
Information on end of use  
Inform yourself on the correct disposal of  
this TV and batteries, see Get started >  
Important > End of use (Page 10).  
Before you wall mount the TV, record the  
correct length of the screw.  
You can determine the length of the screw  
by adding the thickness of your wall mount  
to the screw length shown in the graphic.  
Use a Kensington lock  
NonPublish  
Your TV is equipped with a Kensington  
security slot on the bottom of the TV.  
Purchase a Kensington anti-theft lock (not  
supplied) to secure the TV.  
For 32 inch and 40 inch TVs  
Position the TV  
Before you wall mount the TV, record the  
correct length of the screw. You can  
determine the length of the screw by adding  
the thickness of your wall mount to the  
screw length shown in the graphic.  
Wall mount  
NonPublish  
To mount the TV, purchase an appropriate  
TV mount for your set. Check your TV  
screen size and match it against the list  
below for the type of wall mount to  
purchase:  
81cm / 32 inches: 200mm x 200mm, M6  
81cm / 32 inches: 200mm x 300mm, M6  
(For PFL6XX5 only)  
94cm / 37 inches: 300mm x 200mm, M6  
102cm / 40 inches: 200mm x 200mm, M6  
107cm / 42 inches: 300mm x 200mm, M6  
117cm / 46 inches: 300mm x 300mm, M8  
132cm / 52 inches: 300mm x 300mm, M8  
Warning: Follow all instructions provided  
with the TV mount. Koninklijke Philips  
Electronics N.V. bears no responsibility for  
improper TV mounting that results in  
accident, injury or damage.  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The ideal distance to watch TV from, is  
three times its diagonal screen size. For  
example, if the diagonal screen size of  
the TV is 116cm/46", the ideal viewing  
distance is ~3.5m/~138" from the front  
of the screen.  
For 37 inch to 42 inch TVs  
Before you wall mount the TV, record the  
correct length of the screw. You can  
determine the length of the screw by adding  
the thickness of your wall mount to the  
screw length shown in the graphic.  
While seated, your eyes should be level  
with the center of the screen.  
Product highlights  
Full HD LCD display  
This TV is equipped with a full  
High-Definition (HD) LCD display,  
supporting the maximum HD resolution of  
1920 x 1080p.  
This display offers a brilliant flicker-free  
progressive scan picture with optimum  
brightness and superb colors.  
For 46 inch and 52 inch TVs  
Before you wall mount the TV, record the  
correct length of the screw. You can  
determine the length of the screw by adding  
the thickness of your wall mount to the  
screw length shown in the graphic.  
The LED backlight* of the display offers  
exceptional picture contrast with exceptional  
energy saving.  
*Note: Certain models are equipped with an  
EEFL backlight display only. For detailed  
product information, go to  
ort).  
To enjoy HD content, you must connect to  
a HD source first, otherwise the picture  
quality will be that of a normal TV. See Get  
started > Enjoy HD TV > Full HD content.  
Ambilight  
NonPublish  
Ambilight is the lighting technology that  
emanates from the back of the television  
onto the wall. This innovative technology  
automatically adjusts the colour and  
brightness of the light to match the TV  
picture.  
Placement  
NonPublish  
Before positioning the TV, read all  
safety precautions. See Get Started >  
Important > Safety (Page 9).  
Position the TV where light does not  
shine directly on the screen.  
This creates an unprecedented improvement  
in viewing experience. The light also reduces  
eyestrain thus providing a more relaxing  
viewing experience.  
See Use your TV > Use Ambilight.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before carrying out instructions, temporarily  
close the user manual by pressing on the  
remote control. Open to the same page in  
the user manual by selecting [Help] in the  
Digital TV  
NonPublish  
In addition to normal analog TV broadcasts,  
your TV can receive digital terrestrial  
(DVB-T) broadcasts. Where available, your  
TV can also receive digital cable (DVB-C),  
digital satellite (DVB-S: Not supported on all  
models) and digital radio broadcasts.  
home menu.  
On the Internet  
NonPublish  
A printable PDF version of this user manual  
is available on the Internet. It contains the  
latest information and detailed feature  
explanations not covered by this on-screen  
user manual.  
DVB (Digital Video Broadcasting) gives you  
better picture and better sound quality.  
Some digital broadcasters also include  
several audio (speech) and/or teletext  
languages with DVB.  
Access the PDF as well as other product  
information, including FAQs and firmware  
upgrades at www.philips.com/support.  
EPG  
Electronic Program Guide (EPG) is an  
on-screen guide available for digital channels.  
EPG allows you to:  
View a list of digital programs being  
broadcast  
View upcoming programs  
Group programs by genre  
Set reminders when programs start  
Set up preferred EPG channels  
Notes:  
EPG is not available in all countries.  
For more information on EPG, see Use  
more of your TV > Use EPG (Page  
Multimedia  
NonPublish  
View or play your own multimedia files (such  
as photos, music and videos) from the USB  
connection on the side of the TV.  
See Use more of your TV > Access  
multimedia (Page 27).  
Access more information  
On-screen  
NonPublish  
You are reading the on-screen user manual.  
This manual contains all of the information  
you need to install and use this TV.  
Access the user manual by selecting [Help]  
in the home menu.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2 Use your TV  
Overview  
This section gives you an overview of  
commonly used TV controls and functions.  
Side controls and indicators  
1. Standby indicator/ remote control sensor.  
Remote control  
Overview  
NonPublish  
1.  
+/- : Increases or decreases volume.  
In home menu, press these buttons to move  
horizontally.  
2.  
(Home): Accesses the home menu.  
1.  
(Standby): Switches the TV to standby  
Press again to launch an activity in home  
menu.  
3. P/CH +/- : Switches to the next or  
previous channel. In home menu, press these  
buttons to move vertically.  
4.  
off. During TV standby, switches lounge light  
on or off. Only available on certain models.  
5. Power: Switches the TV on (' | ') or off  
(' o ').  
if it is on. Switches on the TV if it is in  
standby.  
2.  
3.  
to select TV channel list, the Electronic  
Program Guide and teletext.  
(Home): Accesses the home menu.  
(Browse): Accesses the browse menu  
(Ambilight): Switches Ambilight on or  
4.  
Navigates menus and selects items.  
5. (Previous/Next): Switches channels.  
(Navigation buttons):  
Also, skips through pages of a menu, and  
between tracks, albums or folders.  
6. OK: Confirms an entry or selection.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Make sure the + and - ends of the batteries  
line up correctly (+ and - are marked inside).  
Remove the batteries if you are not using  
the remote control for a long time. Dispose  
of batteries according to the end of use  
directives. Read Get started > Important >  
End of use (Page 10).  
Refers to the following for the location of  
the different battery compartments:  
7.  
(Experience): Accesses the  
experience menu.  
8.  
current activity or selection.  
9. +/- (Volume) and  
(Options): Accesses options for the  
For remote control with AAA batteries (end  
to end):  
(Mute): Increases or  
decreases volume; mutes or restores audio.  
10. Color buttons: Selects tasks or options.  
Not supported in MHEG mode.  
11. 0-9 (Numeric buttons): Selects a  
channel or setting.  
12.  
(Picture format): Selects a picture  
format.  
For remote control with AAA batteries (side  
by side):  
13.  
(Subtitle): *Enables or disables  
subtitles.  
14.  
(Back): *Returns to a previous menu  
screen. Press and hold to return to watching  
TV.  
*Not supported in MHEG mode.  
Batteries  
Open the battery cover on the back of the  
remote control to insert the batteries (Type  
AAA-LR03-1.5V or Type CR2032-3V).  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-screen remote control  
For remote control with coin cell batteries:  
NonPublish  
Note: Available if the connected device is  
HDMI-CEC compliant.  
An On-Screen Remote Control (OSRC)  
gives you easy access to commonly used  
functions. The on-screen buttons available  
differ depending on your TV setup and  
features of the connected HDMI-CEC  
device.  
To access the OSRC  
1. While watching TV or a connected device,  
press  
.
2. Select [Show device keys], then press  
OK.  
3. Use the Navigation buttons and OK to  
select and use an on-screen button.  
Basic TV menus  
Usage  
NonPublish  
When using the remote control, hold it  
close to the TV and point it at the remote  
control sensor.  
Make sure that the line-of-sight between the  
remote control and TV is not blocked by  
furniture, walls, or other objects. The  
following illustration is an example only --  
the location of the remote control sensor  
may differ on your TV:  
Home  
NonPublish  
The home menu gives you easy access to  
connected devices, picture and sound  
settings, and other useful features.  
1. Press  
.
2. Select an item in the home menu, then  
press OK to access the menu.  
3. To exit the home menu, press  
or  
.
To start an activity, select the desired item  
with the Navigation buttons, then press OK:  
[Help]: Accesses the electronic user  
manual.  
[Watch TV]: Switches back to the  
antenna source if another source is  
selected.  
[Browse USB]: If a USB storage device  
is connected, accesses the content  
browser.  
[Scenea]: Switches to the Scenea  
wallpaper.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[Picture format]: Changes the picture  
format.  
[Smart picture]: Frequently-used  
picture settings.  
[Smart sound]: Frequently-used sound  
settings.  
[Speakers]: Configure TV speakers for  
Philips EasyLink.  
[Picture shift]: Adjusts the position of  
the picture.  
[Add your devices]: Adds new devices  
to the home menu. Note that you must  
add a new device to the home menu,  
in order to access it.  
[Setup]: Accesses menus that allow you  
to change picture, sound and other TV  
settings.  
Browse  
NonPublish  
The browse menu gives you easy access to:  
Channel list  
NonPublish  
Electronic program guide  
TV channel list  
Teletext  
The channel list displays the TV channels and  
possible radio stations installed on your TV.  
1. While watching TV, press  
2. Select [Channel list], then press OK.  
.
To access the browse menu, while watching  
TV, press  
.
3. Select a channel, then press OK to access  
the channel.  
4. Press  
to exit the channel list without  
changing the channel.  
Add your devices  
NonPublish  
After you connect a device to the TV, add  
this device in the home menu for easy  
access.  
1. Press the Navigation buttons to select an  
item:  
In the home menu, select [Add your  
devices], then press OK. Follow the  
instructions on-screen to add the device to  
the home menu.  
[Programme guide]: Accesses the  
Electronic Program Guide.  
[Channel list]: Accesses the TV channel  
list.  
To remove a device from the home menu,  
[Text]: Accesses teletext.  
select the item, press  
and select  
2. Press OK to confirm your choice.  
[Remove this device]. Press OK.  
Experience  
Setup  
NonPublish  
Press  
to access the experience menu,  
[Setup] in the home menu allows you to  
change most of the TV settings, including:  
which provides a range of frequently-used  
settings.  
Picture or sound settings  
Installation or update of TV channels  
Update of TV software  
Other special features  
1. In the home menu, select [Setup], then  
press OK.  
2. Select an item with the Navigation  
buttons, then press OK:  
The experience bar menu gives you easy  
access to:  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[Quick picture and sound settings]:  
Guides you through picture and sound  
settings.  
Watch TV  
[TV settings]: Advanced picture and  
sound settings.  
[Search for channels] or [Search for  
satellite]: Guides you through antenna  
or satellite (if available) channel  
installation.  
Switch on/off or to standby  
[Channel settings] or [Satellite  
settings]: Advanced channel settings.  
[Update software]: Guides you through  
an update of the TV software.  
[Software settings]: Advanced TV  
update settings.  
[Watch demos]: Demos of special  
features available with the TV.  
Options  
NonPublish  
Option menus offer convenient settings  
related to what is on-screen.  
To switch on  
1. Press  
to see what options are available.  
again.  
If the front LED indicator is off, press  
the power switch (1) on the bottom of  
the TV to the ' | ' position.  
2. To exit, press  
If the front LED indicator is red, press  
on the remote control (2).  
Alternatively, switch on the TV from  
standby by pressing any key on the side  
of the TV.  
NonPublish  
Notes:  
The front LED indicator does not turn  
on when the TV is switched on.  
The TV requires some time to start up.  
During this time, the TV will not  
respond to the remote control or side  
controls. This is normal behavior.  
To switch to standby  
Press  
on the remote control. The front  
LED indicator switches to red.  
To switch off  
Press the power switch on the bottom of  
the TV to the 'o' position. The TV switches  
off.  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press  
+/- on the side of the TV.  
Though your TV consumes very little power  
when in standby, energy continues to be  
consumed. When not in use for an  
extended period of time, switch off the TV  
using the power switch on the bottom of  
the set.  
Switch channels  
NonPublish  
Press  
on the remote control or  
P/CH +/- on the side of the TV.  
NonPublish  
To mute or unmute sound  
Press  
Press  
to mute the sound.  
again to restore the sound.  
Use the [Sound] menu to adjust headphone  
volume. For more information, see Setup  
the TV > Change picture and sound  
settings > More sound settings (Page 31).  
Use Smart picture settings  
Use the [Smart picture] experience menu  
to access frequently-used picture settings.  
NonPublish  
Press , then select [Channel list] to  
use the channel list.  
Press  
to return to the  
1. While watching TV, press  
.
previously-viewed channel.  
Enter a channel number using the  
Numeric buttons.  
2. Select [Smart picture], then select one of  
the following settings:  
[Personal]: Sets the TV to your  
personal preferences set in the  
To view analog or digital channels only  
Filter the channel list to access analog or  
digital channels only.  
[Picture] menus in [Setup].  
[Vivid]: Rich and dynamic settings, ideal  
for daylight use.  
[Natural]: A natural picture setting.  
1. In the channel list, press  
.
2. Select [Select list] > [Analogue] or  
[Digital], then press OK.  
Depending on your selection, only digital or  
analog channels become available.  
[Cinema]: Ideal settings for watching  
movies.  
[Game]: Ideal settings for gaming.  
[Energy saving]: The most energy  
conscious settings.  
Adjust volume  
NonPublish  
[Standard]: Adjusts picture settings to  
suit most environments and types of  
video. Factory default settings.  
[Photo]: Ideal settings for viewing  
photos.  
To increase or decrease volume  
Press +/- on the remote control.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Custom]: Allows you to customize  
and store personal picture settings.  
[Auto zoom]: Automatically zooms the  
picture in to fill the screen as much as  
possible, without distortion. Black bars  
may be visible. Not for PC input.  
[Super zoom]: Removes the black bars  
on the sides of 4:3 broadcasts. Not for  
HD or PC.  
3. Press OK to confirm your choice.  
4. Press to exit.  
Use Smart sound settings  
NonPublish  
Use the [Smart sound] experience menu to  
access frequently-used sound settings.  
1. While watching TV, press  
2. Select [Smart sound], then select one of  
[Movie expand 16:9]: Scales the classic  
4:3 format to 16:9. Not recommended  
for HD or PC.  
[Wide screen]: Stretches the classic 4:3  
format to 16:9.  
[Unscaled]: Provides maximum detail  
for PC. Only available when [PC mode]  
is enabled in the [Picture] menu.  
.
the following settings:  
[Personal]: Sets the TV to your  
personal preferences set in the [Sound]  
menus in [Setup].  
[Standard]: Adjusts sound settings to  
suit most environments and types of  
audio.  
[News]: Applies sound settings ideally  
suited for spoken audio, such as the  
news.  
Notes:  
Depending on the picture source, some  
picture formats are not available and  
will not be seen on-screen.  
[Movie]: Applies sound settings ideally  
suited for movies.  
[Game]: Ideal settings for gaming.  
[Drama]: Applies sound settings ideally  
suited for drama.  
Watch a connected device  
Add new device  
NonPublish  
Notes:  
[Sports]: Applies sound settings ideally  
suited for sports.  
Before watching a connected device,  
you must add it to the home menu.  
3. Press OK to confirm your choice.  
4. Press to exit.  
HDMI ARC compliant devices  
connected to the HDMI ARC  
connector on the TV are automatically  
added to the home menu.  
Change picture format  
NonPublish  
Change the picture format to suit your  
viewing experience.  
1. Connect and switch on the device.  
2. Press  
.
1. Press  
.
3. Select [Add your devices], then press  
2. Select a picture format, then press OK to  
OK. Follow the on-screen instructions.  
confirm.  
Note: You can access picture formats via the  
Watch connected device  
NonPublish  
experience menu  
and the [Setup] menu.  
1. Press  
.
The following picture formats can be  
selected:  
2. Select the device from the home menu.  
3. Press OK to confirm your choice.  
[Auto fill]: Automatically enlarges the  
picture to fill the screen. Minimal  
picture distortion, subtitles remain  
visible. Not for PC input.  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[Brightness]: Adjusts the brightness of  
Ambilight.  
Use Ambilight  
[Colour]: Selects a predefined color.  
Switch on Ambilight  
[Custom colour]: Set your own  
Ambilight colour. To access this option,  
set [Ambilight] > [Colour] >  
[Custom].  
[Separation]: Adjusts the difference in  
color levels between each side of the  
TV. Turn off this feature for a dynamic  
and uniform Ambilight color.  
(Available on certain models only.)  
Enjoy a more relaxed viewing experience  
and improved perceived picture quality. Dim  
the lighting conditions in the room for the  
best Ambilight effect.  
Caution  
To avoid bad infrared remote control  
reception, place your devices out of sight of  
Ambilight.  
[TV switch off]: Selects how Ambilight  
switches off when the TV is switched  
off.  
1. Press  
(Experience).  
[Lounge light mood]: Selects a lounge  
light mode. This setting is applied when  
lounge light is enabled in standby mode.  
[Scenea lounge light]: Switch on or off  
Scenea lounge light when Scenea is  
enabled.  
[Wall colour]: Selects a color to match  
the wall color. Ambilight will correct its  
colours to mix best with the colour of  
the wall behind the TV.  
2. Select [Ambilight], then press OK.  
3. To switch Ambilight on or off, select [On]  
or [Off].  
You can also press  
Ambilight on or off.  
on the TV to switch  
Set Ambilight response  
(Available on certain models only.)  
Before you can adjust the speed of Ambilight  
response, press  
> [Setup] > [TV  
settings] > [Ambilight] > [Colour] >  
[Dynamic].  
Set the speed which Ambilight responds to  
on-screen images.  
1. Press  
(Experience).  
2. Select [Ambilight dynamic], then press  
OK.  
Setup Ambilight  
(Available on certain models only.)  
In the Ambilight menu, you can access more  
Ambilight settings.  
3. Move the slider to set Ambilight  
responsiveness.  
4. Press  
to exit the slider.  
While watching TV, press  
[TV settings] > [Ambilight].  
Select a setting to adjust:  
> [Setup] >  
5. Press OK to confirm your choice.  
[Dynamic]: Adjusts Ambilight between  
relaxed and dynamic levels. Available  
only if Ambilight [Colour] is set to  
[Dynamic].  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use lounge light  
(Available on certain models only.)  
When the TV is on standby, you can switch  
on Ambilight and create a lounge light effect  
in your room.  
During TV standby, press  
the TV.  
on the side of  
Note: It may take more than 5 seconds for  
the lounge light to switch on.  
To select another lounge light colour, see  
Use your TV > Use Ambilight > Setup  
Ambilight.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Language]: Switches to a different  
language group to display a language  
correctly when that language uses a  
different character set.  
3 Use more of  
your TV  
3. Press  
to exit the options menu.  
Use teletext  
Select a teletext language  
Some digital TV broadcasters have several  
teletext languages available. You can set your  
primary and secondary language.  
Select a page  
NonPublish  
1. Press  
.
1. Press  
.
2. Select [Text], then press OK.  
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Languages] >  
[Primary Text] or [Secondary Text].  
3. Select a page by:  
Entering the page number with the  
Numeric buttons.  
3. Select your preferred teletext languages,  
then press OK.  
Pressing  
next or previous page.  
Pressing the Color buttons to select a  
or  
to view the  
Select subpages  
NonPublish  
color coded item.  
A teletext page number can hold several  
subpages. These subpages are shown on a  
bar next to the main page number.  
4. Press  
to exit teletext.  
Access teletext options  
NonPublish  
When available on a teletext page, press  
1. When in teletext, press  
2. Select an option:  
.
or  
to select subpages.  
[Freeze page] / [Unfreeze page]:  
Search teletext  
1. When in teletext, press OK to highlight  
the first word or number.  
2. Press the Navigation buttons to skip to  
NonPublish  
Freezes or unfreezes the current page.  
[Dual screen] / [Full screen]: Enables  
or disables dual screen teletext, which  
splits the current channel or source to  
the left of the screen, with teletext on  
the right.  
the word or number to search.  
3. Press OK to begin the search.  
[T.O.P. overview]: Table Of Pages  
(T.O.P.) teletext broadcasts allow you  
to jump from one subject to another  
without using page numbers.  
4. Press  
highlighted to exit the search.  
until no word or number is  
Use digital teletext  
NonPublish  
NonPublish  
[Enlarge] / [Normal view]: For more  
comfortable reading, you can enlarge  
the teletext page. Press the Navigation  
buttons to move around the enlarged  
screen.  
Some digital TV broadcasters offer dedicated  
digital text or interactive services on their  
digital TV channels, for example BBC1.  
When in digital teletext:  
Press the Navigation buttons to  
[Reveal]: Hides or reveals hidden  
information on a page, such as solutions  
to riddles or puzzles.  
[Cycle subpages]: Cycles through  
subpages automatically if subpages are  
available.  
select or highlight items.  
Use the Color buttons to select an  
option, then press OK to confirm or  
activate.  
Note: Digital text services are blocked when  
subtitles are broadcast and [Subtitles] are  
enabled. Read Use more of your TV > Use  
subtitles (Page 26).  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Set reminders when programs start  
Setup preferred EPG channels  
Use Teletext 2.5  
NonPublish  
Teletext 2.5 offers more colors and better  
graphics than normal teletext. If Teletext 2.5  
is broadcast by a channel, it is switched on  
by default.  
Note: EPG is not available in all countries.  
Switch on EPG  
NonPublish  
1. Press  
.
To switch Teletext 2.5 on or off  
2. Select [Programme guide], then press  
OK.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Text 2.5] > [On] or [Off],  
then press OK.  
EPG options  
NonPublish  
Use the EPG options menu to set or clear  
reminders, change day and access other  
useful EPG options. Depending on the  
broadcast service, these options are available  
only for seven or eight days.  
Favorite channels  
Add or remove channels  
NonPublish  
1. Press  
2. Select [Channel list:], then press OK.  
3. Press  
.
1. When in EPG, press  
.
2. Press the Navigation buttons and OK to  
select and adjust one of the following  
settings:  
.
4. Select [Mark as favourite] or [Unmark as  
favourite], then press OK.  
[Set reminder]: Sets program  
reminders.  
[Clear reminder]: Clears program  
A star appears in the channel grid, indicating  
that the channel is added to the favorite list.  
The star disappears if you remove the  
channel from the favorite list.  
reminders.  
[Change day]: Sets the EPG day. Select  
[Today], [Next day] or [Previous day].  
[More info]: Views program  
information.  
[Search by genre]: Searches TV  
programs by genre.  
[Scheduled reminders]: Lists programs  
reminders.  
[Update Programme guide]: Updates  
Select a favorite list  
NonPublish  
View only channels in a favorite list, or view  
all channels if a favorite list is currently  
selected.  
1. In the channel list, press  
.
2. Select [Select list] > [Favourites] to  
display channels in a favorite list; or [All] to  
display all channels.  
3. Press OK to confirm your choice.  
the latest program information.  
Use timers and locks  
Use EPG  
Sleeptimer  
Overview  
NonPublish  
NonPublish  
Sleeptimer switches the TV to standby after  
a pre-defined period of time. You can always  
switch off your TV earlier or reset the  
sleeptimer during the countdown.  
The Electronic Program Guide (EPG) is an  
on-screen guide available for digital channels.  
EPG allows you to:  
View a list of digital programs being  
broadcast  
1. Press  
.
2. Select [Setup] > [TV settings] >  
View upcoming programs  
Group programs by genre  
[Preferences] > [Sleeptimer].  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
For information on child lock codes, see Use  
more of your TV > Use timers and locks >  
Child lock (Page 26).  
3. Press the Navigation buttons to set the  
sleeptimer. The sleeptimer can be set up to  
180 minutes, in steps of five minutes. The  
sleeptimer is switched off if it is set to zero  
minutes.  
Use subtitles  
4. Press OK to activate the sleeptimer. The  
TV switches to standby after the set period  
of time.  
On analog channels  
NonPublish  
1. Switch the TV to an analog TV channel.  
Child lock  
2. Press  
, then select [Text] and press  
NonPublish  
OK.  
You can prevent your children from  
watching TV by locking the TV.  
Set or change the child lock code  
3. Enter the three number page number of  
the subtitles page (usually '888').  
1. Press  
.
4. Press  
to exit teletext. Subtitles display if  
available.  
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Child lock] > [Set  
code] or [Change code].  
On digital channels  
NonPublish  
3. Enter the code with the Numeric  
buttons.  
Tip: If you forget your code, enter ‘8888’ to  
Not supported on MHEG channels.  
1. Press  
.
2. In the menu that appears, select [Off],  
[On] or [On during mute], then press OK.  
Note: With [On during mute], the TV  
displays subtitles only when the sound is  
override any existing codes.  
NonPublish  
Lock or unlock channels  
1. In the child lock menu, select [Channel  
lock].  
muted with  
.
2. Enter the child lock code with the  
Numeric buttons. The [Channel lock]  
menu appears.  
3. Select channels to lock or unlock.  
Parental rating  
NonPublish  
Some digital broadcasters rate their  
programs according to age. You can set your  
TV to display only programs with age ratings  
lower than your child’s age.  
Subtitle language  
NonPublish  
This feature is only supported on selected  
digital channels.  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Child lock] >  
[Parental rating]. A message appears  
prompting you to enter the child lock code.  
1. While watching TV, press  
2. Select [Subtitle language].  
.
3. Select a subtitle language from the list,  
then press OK.  
3. Enter the child lock code with the  
Numeric buttons.  
4. Select an age rating, then press OK. All  
programs beyond the selected age rating are  
blocked.  
Note: More information about language  
settings is available in Setup the TV >  
Change language settings > Audio, Subtitle,  
Teletext languages (Page 34).  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Listen to music  
Press the Navigation buttons to select a  
music track, then press OK.  
Access multimedia  
Press  
forward a track.  
Press to exit content browser.  
to access or exit the following  
/
to fast rewind or fast  
Browse USB  
NonPublish  
You can view photos or play music and  
videos on TV from a USB storage device.  
Press  
settings:  
Caution: Philips is not responsible if the USB  
storage device is not supported nor is it  
responsible for damage or loss of data from  
the device.  
[Stop]: Stops audio playback.  
[Repeat]: Repeats a song or an album.  
[Play once] Plays the file once.  
[Shuffle on] / [Shuffle off]: Enables or  
disables random play of songs.  
You can access the USB content browser  
using one of the following methods:  
When watching TV, connect the USB  
device to the USB port on the side of  
your TV.  
Watch video  
Press the Navigation buttons to select a  
video file, then press OK.  
Press . Select [Browse USB], then  
press OK.  
Press  
forward a file.  
Press to exit the content browser.  
or  
to rewind or fast  
View slideshow  
Press the Navigation buttons to select a  
picture, then press OK.  
During video playback, press  
the following settings:  
to access  
To pause or stop playback, press OK  
again.  
To jump to the previous or next file,  
[Stop]: Stops playback.  
[Repeat]: Repeats a video.  
[Shuffle on] / [Shuffle off]: Enables or  
disables random play of videos.  
press  
or  
.
Press  
to exit content browser.  
Press  
settings:  
to access or exit the following  
Listen to digital radio  
NonPublish  
If digital broadcasting is available, digital radio  
channels are installed automatically during  
installation.  
[Show info]: Displays the file  
information.  
[Stop]: Stops slideshow.  
[Rotate]: Rotates the file.  
[Repeat]: Repeats the slideshow.  
1. While watching TV, press  
2. Select [Channel list:], then press OK.  
3. In the channel list, press  
.
.
[Play once]: Plays the file once.  
[Shuffle off] / [Shuffle on]: Enables or  
disables random display of pictures in  
the slideshow.  
4. Select [Select list] > [Radio], then press  
OK.  
5. Select a radio channel, then press OK.  
[Slideshow speed]: Sets the display  
time for each picture in the slideshow.  
[Slideshow transition]: Sets the  
transition from one picture to the next.  
[Set as Scenea]: Sets the selected  
picture as wallpaper on TV.  
You can listen to satellite radio broadcast (if  
available).  
1. While watching TV, press  
2. Select [Channel list:], then press OK.  
3. In the channel list, press  
.
.
4. Select [TV/Radio] > [Radio], then press  
OK.  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Hearing impaired  
Use Scenea  
NonPublish  
Some digital TV channels broadcast special  
audio and subtitles adapted for people who  
are hearing impaired.  
Activate Scenea  
NonPublish  
To switch on hearing impaired audio and  
subtitles (if available)  
You can use Scenea to display a picture as  
wallpaper on your TV. Make sure that the  
location of your TV is set to [Home] mode.  
1. While watching TV, press  
.
2. Press the red button to select [Hearing  
1. Press  
.
impaired].  
2. Select [Scenea] , then press OK.  
The default or pre-loaded picture is  
displayed.  
3. Press the green button to switch on  
hearing impaired audio and subtitles, press  
the red button to switch it off.  
Note: If the sleeptimer is off, the wallpaper is  
4. Press  
to exit.  
displayed for 240 minutes. Otherwise, it is  
displayed for the duration of the sleeptimer.  
For more information on the sleeptimer, see  
Use more of your TV > Use timers and  
locks > Sleeptimer (Page 25).  
Tip: To verify whether a hearing impaired  
audio language is available, press  
and  
select [Audio language]. Languages with an  
ear icon indicate hearing impaired support.  
Visually impaired  
NonPublish  
Set a picture as Scenea  
NonPublish  
Some digital TV channels broadcast special  
audio adapted for people who are visually  
impaired. The normal audio is mixed with  
extra commentary.  
To switch on visually impaired audio (if  
available)  
Note: The file size of the picture must not  
be more than 1MB.  
1. Connect the USB storage device to the  
TV.  
2. Press  
.
3. Select [Browse USB], then press OK.  
1. While watching TV, press  
.
2. Press the green button to select [Visually  
impaired].  
3. Use the following buttons to select:  
4. Select a picture, then press  
5. Select [Set as Scenea], then press OK.  
6. Select [Yes], then press OK.  
.
Red - [Off]: Turn off visually impaired  
audio.  
7. Press any key to exit Scenea.  
Yellow - [Headphones]: Hear visually  
impaired audio from headphones only.  
Green - [Speakers]: Hear visually  
impaired audio from speakers only.  
Blue - [Speakers + headphones]: Hear  
visually impaired audio from speakers  
and headphones only.  
Universal access  
Enable universal access  
NonPublish  
Where supported by your digital TV  
4. Press  
to exit.  
broadcaster, this TV allows special audio and  
subtitles for the hearing impaired, as well as  
special audio for the visually impaired.  
Note: The green and yellow buttons are not  
applicable if EasyLink Remote Control is  
enabled. For more information, see Connect  
the TV > Use Philips EasyLink > EasyLink  
features (Page 51).  
To enable these features, you must turn on  
universal access in the [Preferences] menu.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Universal access] > [On],  
then press OK.  
Tip: To verify whether visually impaired  
audio is available, press  
and select [Audio  
language]. Languages with an eye icon  
indicate visually impaired support.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjust volume for the visually impaired  
1. In the [Universal access] menu, press the  
yellow button to select [Mixed volume].  
2. Press the Navigation buttons to move the  
slider up or down, then press OK.  
3. Press  
to exit.  
Audio feedback for the visually impaired  
This feature enables audio feedback when  
buttons are pressed on the remote control  
or TV.  
1. In the [Universal access] menu, press the  
blue button to select [Key beep].  
2. Press the green button to turn on audio  
feedback or press the red button to turn it  
off.  
3. Press  
to exit.  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
More picture settings  
NonPublish  
4 Setup the TV  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Picture], then press OK.  
Change picture and sound  
settings  
3. Select a setting to adjust:  
[Smart picture]: Accesses pre-defined  
smart picture settings.  
[Reset]: Resets to factory default  
settings.  
[Contrast]: Adjusts the intensity of  
bright areas, keeping dark areas  
unchanged.  
Settings assistant  
NonPublish  
Use the settings assistant to guide you  
through the picture and sound settings.  
1. While watching TV, press  
.
2. Select [Setup] > [Quick picture and  
sound settings], then press OK.  
3. Select [Start], then press OK.  
Follow the on-screen instructions to choose  
your preferred settings.  
[Brightness]: Adjusts the intensity and  
details of dark areas.  
[Colour]: Adjusts color saturation.  
[Hue]: Compensates color variations in  
NTSC encoded transmissions.  
[Sharpness]: Adjusts sharpness in the  
image.  
[Noise reduction]: Filters and reduces  
noise in an image.  
[Tint]: Adjusts the color balance in an  
image.  
Smart picture settings  
Use the [Smart picture] experience menu  
to access frequently-used picture settings.  
1. While watching TV, press  
.
2. Select [Smart picture], then select one of  
the following settings:  
[Custom tint]: Customizes tint setting.  
[Personal]: Sets the TV to your  
personal preferences set in the  
[Picture] menus in [Setup].  
[Pixel Plus HD]/[Pixel Precise HD]:  
Accesses advanced settings, including  
[HD Natural Motion], [100 Hz Clear  
LCD], [Advanced sharpness],  
[Dynamic contrast], [Dynamic  
backlight], [MPEG artefact reduction],  
[Colour enhancement], [Gamma].  
[PC mode]: Enables picture settings  
adjustment when a PC is connected to  
the TV via HDMI. If enabled, you can  
select [Picture format] > [Unscaled]  
which provides maximum detail for  
display of PC content.  
[Vivid]: Rich and dynamic settings, ideal  
for daylight use.  
[Natural]: A natural picture setting.  
[Cinema]: Ideal settings for watching  
movies.  
[Game]: Ideal settings for gaming.  
[Energy saving]: The most energy  
conscious settings.  
[Standard]: Adjusts picture settings to  
suit most environments and types of  
video. Factory default settings.  
[Photo]: Ideal settings for viewing  
photos.  
[Light sensor]: Adjusts settings  
dynamically to match lighting conditions.  
[Picture format]: Changes the picture  
format.  
[Screen edges]: Changes the picture  
[Custom]: Allows you to customize  
and store personal picture settings.  
3. Press OK to confirm your choice.  
4. Press to exit.  
size.  
[Picture shift]: Adjusts the position of  
the picture. Not applicable if selected  
picture format is [Auto zoom] or  
[Wide screen].  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Smart sound settings  
Reset to factory settings  
NonPublish  
Use the [Smart sound] experience menu to  
access frequently-used sound settings.  
Resetting your TV to factory settings  
restores default picture and sound settings.  
Channel installation settings remain the  
same.  
1. While watching TV, press  
.
2. Select [Smart sound], then select one of  
the following settings:  
1. While watching TV, press  
.
[Personal]: Sets the TV to your  
personal preferences set in the [Sound]  
menus in [Setup].  
[Standard]: Adjusts sound settings to  
suit most environments and types of  
audio.  
[News]: Applies sound settings ideally  
suited for spoken audio, such as the  
news.  
2. Select [Setup] > [TV settings] > [Factory  
settings], then press OK.  
TV settings are reset back to the factory  
default.  
Start a TV demo  
NonPublish  
Start a demo to find out more about your  
TV's features.  
Note: Demos are not supported on MHEG  
channels.  
[Movie]: Applies sound settings ideally  
suited for movies.  
1. While watching TV, press  
.
[Game]: Ideal settings for gaming.  
[Drama]: Applies sound settings ideally  
suited for drama.  
2. Select [Setup] > [Watch demos], then  
press OK.  
3. Select a demo, then press OK.  
[Sports]: Applies sound settings ideally  
4. Press  
to exit the demo.  
suited for sports.  
3. Press OK to confirm your choice.  
4. Press to exit.  
Change channel settings  
More sound settings  
NonPublish  
Reorder channels  
NonPublish  
1. Press  
.
After installation, you may want to reorder  
the channel list to suit your preference.  
1. While watching TV, press  
2. Select [Channel list], then press OK.  
3. In the channel list, press  
4. Select [Reorder], then press OK.  
2. Select [Setup] > [TV settings] > [Sound],  
then press OK.  
.
3. Select a setting to adjust:  
[Smart sound]: Accesses pre-defined  
smart sound settings.  
[Reset]: Resets to factory default  
settings.  
[Bass]: Adjusts the bass level.  
.
5. Select the channel to reorder, move it to  
the desired location, then press OK.  
6. Select [Insert] to insert the channel into  
the desired location, [Swap] to swap  
location with another channel or [Cancel] to  
cancel the reorder.  
7. Press OK to activate.  
[Treble]: Adjusts the treble level.  
[Surround]: Enables spatial sound.  
[Headphones volume]: Adjusts  
headphone volume.  
[Auto volume leveling]: Automatically  
reduces sudden volume changes, for  
example, when switching channels.  
[Balance]: Adjusts the balance of the  
left and right speakers to best suit your  
listening position.  
Rename channels  
NonPublish  
After installation, you may want to rename  
channels to suit your preference.  
1. While watching TV, press  
2. Select [Channel list], then press OK.  
.
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Automatic update  
3. In the channel list, press  
.
4. Select [Rename], then press OK.  
To set the TV to update digital TV channels  
automatically, leave the TV in standby mode.  
Once a day, the TV updates earlier found  
channels and stores new channels. Empty  
channels are removed from the channel list.  
5. In the entry screen that appears, press the  
Navigation buttons or Numeric buttons to  
edit the name, then press OK.  
6. Once complete, press the Navigation  
buttons to select [Done].  
If a channel update is performed, a message  
appears at startup.  
To clear the entry, select [Clear].  
To cancel, select [Cancel].  
If you do not want this message to appear  
1. Press  
.
7. Press OK to confirm your choice.  
8. Press to exit.  
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Channel installation]  
> [Channel update message] > [Off], then  
press OK.  
Hide or unhide channels  
NonPublish  
Hide channels  
Hide channels from the channel list, to  
prevent unauthorized access.  
1. While watching TV, press  
2. Select [Channel list], then press OK.  
To disable automatic updates  
In the [Channel installation] menu,  
select [Automatic channel update] >  
[Off].  
.
3. In the channel list, select the channel to  
Other options  
Select audio language  
hide, then press  
.
4. Select [Hide channel], then press OK.  
The channel is hidden.  
If the TV channel has multiple or dual sound  
broadcast, you can select the preferred  
audio language.  
Unhide channels  
1. While watching TV, press  
2. Select [Channel list], then press OK.  
3. In the channel list, press  
.
1. While watching TV, press  
.
[Audio language]: Select the audio  
.
language for digital channels.  
[Dual I-II]: Select the audio language for  
analog channels.  
4. Select [Show hidden channels], then press  
OK. Hidden channels appear in the channel  
list, but without channel information  
displayed.  
5. Select the channel to unhide, then press  
.
6. Select [Unhide channel], then press OK.  
Select video stream (for DVBS channel  
only)  
If available, you can view different video  
stream of the channel. (depending on  
broadcast service provider)  
Repeat steps 5 and 6 to unhide other  
channels.  
1. While watching TV, press  
.
2. Select [Video selection] to view the  
various selection.  
Update channel list  
NonPublish  
When the TV was switched on for the first  
time, a full installation of channels was  
performed.  
Install channels  
You can set the TV to add or remove digital  
channels automatically. You can also  
manually start the channel update.  
Automatic install  
NonPublish  
When the TV was switched on for the first  
time, a full installation of channels was  
performed. You can redo this full installation  
again to set your language, country and  
install all available TV channels.  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note:  
Press  
> [Watch satellite] to watch  
If you are prompted to enter a code, enter  
'8888'.  
satellite channels.  
Install analog channels  
[Search for satellite] is only available if the  
NonPublish  
TV supports DVB-S.  
This section describes how to search and  
store analog TV channels manually.  
Step 1: Select your system  
Note: Skip this step if your system settings  
are correct.  
1. Press  
.
2. Select [Setup] > [Search for channels] or  
[Search for satellite], then press OK.  
3. Follow the on-screen instructions to  
complete the channel installation.  
4. Once complete, select [Finish], then press  
OK.  
If you are prompted to enter a code, enter  
'8888'.  
1. While watching TV, press  
.
2. Select [Setup] > [Channel settings] >  
[Channel installation] > [Analogue: Manual  
installation] > [System], then press OK.  
Tip: Press  
to see the channel list.  
Notes  
3. Select the system for your country or  
region, then press OK.  
During installation, leave [Settings]  
unchanged unless your digital provider  
provides you with the specific values to  
enter.  
Step 2: Search and store new TV channels  
1. In the [Analogue: Manual installation]  
menu, select [Find channel], then press OK.  
When digital TV channels are found,  
the list of installed channels may display  
empty channel numbers. You can  
rename, reorder or uninstall these  
channels.  
2. Press:  
The Navigation buttons or Numeric  
buttons to manually enter the channel  
frequency.  
The Navigation buttons to select  
[Search]. Press OK to automatically  
search for the next channel.  
Access DVB-C or DVB-T channels  
If you have installed both DVB-C and DVB-T  
channels, you have to switch to the  
respective network to watch channels on  
that network.  
3. When the correct channel frequency is  
entered, select [Done], then press OK.  
4. Select [Store current channel] to store  
the fine tuned channel as the current channel  
number, or select [Store as new channel]  
to store it as a new channel number.  
1. While watching TV, press  
.
2. Select [Setup] > [Channel settings].  
3. Select [Channel installation] > [Antenna  
or Cable DVB].  
Install digital channels  
4. Select one of the following settings:  
NonPublish  
[Antenna (DVB-T)]: Access free-to-air  
antenna or digital DVB-T channels  
[Cable]: Access cable or digital DVB-C  
channels.  
You can reposition your antenna to improve  
the reception. You need to know the  
correct frequency to tune. For best results,  
contact the service provider or get a  
professional installer.  
3. Press OK to confirm your choice.  
4. Press to exit.  
The TV switches to the selected channel list.  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Channel installation] > [Digital: Reception  
test] > [Search], then press OK.  
Access DVB-S channels (for certain models  
only)  
If your satellite is connected to the SAT  
connector, you can receive satellite channels.  
3. Press the Numeric buttons to enter the  
channel frequency.  
4. Select [Search], then press OK.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. When the correct channel is located,  
select [Store], then press OK.  
Change language settings  
6. Press  
Notes  
to exit.  
Audio, subtitle, teletext languages  
NonPublish  
Digital TV channels may stream several  
audio, subtitle and teletext languages with a  
broadcast. Set preferred languages when  
multiple languages are available.  
If the reception is poor, reposition your  
antenna and repeat the procedure.  
If you receive the channel with DVB-C,  
the options [Symbol rate mode] and  
[Symbol rate] are available.  
In [Symbol rate mode], select  
[Automatic] unless your cable provider  
1. Press  
.
2. Select [Setup] > [Channel settings] or  
[Satellite settings] > [Language].  
3. Select one of the following settings, then  
press OK:  
supplies you with a specific symbol rate  
value.  
[Primary audio] / [Secondary audio]:  
Selects the available audio language for  
digital channels.  
[Primary subtitles] / [Secondary  
subtitles]: Selects the available subtitle  
language for digital channels.  
[Primary Text] / [Secondary Text]:  
Selects the available teletext for digital  
channels.  
[Hearing impaired]: Enables or disables  
hearing impaired subtitles.  
[Visually impaired] (UK only): Selects  
the device for audio output.  
[Volume - Visually impaired] (UK only):  
Adjusts the volume of the visually  
impaired audio.  
Install satellite channels  
(For certain models only)  
If your satellite is connected to the SAT  
connector, you can receive satellite channels.  
Note: If you are prompted to enter a code,  
enter '8888'.  
1. While watching TV, press  
2. Select [Setup] > [Search for satellite] >  
[Reinstall channels].  
.
3. Follow the on-screen instructions to  
complete the installation of satellite channels.  
4. Once complete, select [Finish], and then  
press OK.  
Fine tune analog channels  
NonPublish  
[Preferred audio format]: Select  
[Standard] to receive standard audio  
format (MPEG). Select [Advanced] to  
receive advanced audio formats (AAC,  
EAC-3 or AC-3 if available).  
[Mono/Stereo]: Select [Mono] or  
[Stereo] if stereo broadcasting is  
available.  
If the reception of an analog TV channel is  
poor, try fine tuning the TV channel.  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Channel installation] > [Analogue: Manual  
installation] > [Fine tune], and then press  
OK.  
3. Press  
or  
to fine tune the channel.  
4. Press  
to exit.  
4. When the correct channel frequency is  
selected, select [Done], and then press OK.  
5. Select [Store current channel] to store  
the fine tuned channel under the current  
channel, or select [Store as new channel] to  
store under a new channel number.  
Tip: Set a secondary language in the same  
menu. You receive this language if the  
primary language is unavailable.  
Menu language  
NonPublish  
1. While watching TV, press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Menu language].  
3. Select a menu language from the list, then  
press OK.  
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Change the clock mode  
By default, the clock mode is set to  
[Automatic], syncing the TV clock to  
Change other settings  
Coordinated Universal Time (UTC). If your  
TV cannot receive UTC transmissions, set  
the clock mode to [Manual]. [Country  
dependent] applies UTC and gives you the  
option of setting [Daylight saving].  
Energy efficient settings  
1. While watching TV, press the green  
button.  
2. Select one of the following settings, then  
press OK:  
1. While watching TV, press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Clock] > [Auto clock  
mode].  
3. Select [Automatic], [Manual] or [Country  
dependent], then press OK.  
[Energy saving]: Applies a combination  
of picture settings to reduce energy  
consumption.  
[Mute screen]: Turns off the TV  
display. 'Muting' the screen saves  
energy if you just want to listen to  
audio from the TV.  
[Light sensor]: To save energy, the  
built-in ambient light sensor lowers the  
brightness of the TV screen when the  
surrounding light darkens.  
Enable or disable daylight saving  
If clock mode is set to [Country  
dependent], enable or disable daylight saving  
if required for your time zone.  
1. In the [Clock] menu, select [Daylight  
saving] > [Daylight saving time] or  
[Standard time], then press OK. Daylight  
saving is enabled or disabled for your time  
zone.  
Set the clock manually  
If clock mode is set to [Manual], set the date  
and time manually.  
Audio lipsync  
NonPublish  
Turn on digital audio lipsync to automatically  
sync the image on your TV to audio from a  
connected Home Theatre System.  
1. While watching TV, press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Audio Out delay] > [On],  
then press OK.  
1. In the [Clock] menu, select [Date] or  
[Time], then press OK.  
2. Use the Navigation buttons to make your  
selection, then select [Done].  
TV clock  
NonPublish  
You can display a clock on the TV screen.  
The clock displays the current time using  
time data received from your TV service  
operator.  
TV location  
NonPublish  
A range of TV settings are applied to suit the  
location of the TV.  
Shop or home mode  
The flexibility to change settings is limited if  
the TV location is set to [Shop] mode. Set  
the TV location to [Home] mode to access  
Display the TV clock  
1. When watching TV, press  
2. Select [Status], then press OK.  
The clock displays on the lower right hand  
corner of the TV screen.  
.
all TV settings.  
NonPublish  
1. While watching TV, press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Location] > [Home] or  
[Shop], then press OK.  
3. Restart the TV.  
EN  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Stand mount or wall mount  
Specific TV settings are applied to suit the  
mounting location of the TV.  
1. In the [Preferences] menu, select [TV  
placement] > [On a TV stand] or [Wall  
mounted], then press OK.  
On-screen Help  
Before updating the on-screen Help, ensure  
you have the following:  
An empty USB flash drive. The USB  
flash drive must be FAT or  
DOS-formatted.  
Do not use a USB hard drive.  
A PC with Internet access.  
An archive utility that supports the ZIP  
file format (for example, WinZip for  
Microsoft Windows or Stufflt for  
Macintosh).  
Update software  
TV software  
1. Press  
.
2. Select [Setup] > [Software settings] >  
[Current software info], then press OK.  
The version of the current software is  
displayed.  
Before updating Help, check the current  
version installed on your TV. If the version of  
Help on your TV is lower than the version  
available at www.philips.com/support,  
download and install the latest Help file.  
To update the software, use one of these  
options:  
a. update from digital broadcast.  
b. update with USB.  
1. Press  
.
2. Select [Help], then press OK.  
On-screen Help is displayed.  
For more information, see the following  
3. Select Technical data > Dimensions.  
Navigate to the last page of this section, and  
note the version number.  
pages.  
NonPublish  
If available, your TV can receive software  
updates via digital broadcasts.  
Note: The version number is a 12 digit  
number, where the last digit indicates the  
version of Help installed in your TV. For  
example, if the version in the TV is '3139  
137 03583', '3' represents the version of  
Help currently installed.  
If an update is available, a message appears  
prompting you to update the software. We  
strongly recommend that you update the  
software when prompted.  
NonPublish  
Before performing this procedure be sure to:  
Set aside some time to complete the  
entire update.  
Have available a USB flash drive with at  
least 256MB of storage space.  
Have access to a computer with a USB  
port and internet access.  
1. Insert the empty USB flash drive into a  
USB connector on your PC.  
2. On your PC, create a folder named  
‘upgrades’ in the root directory of the USB  
flash drive.  
3. In your web browser, navigate to  
4. At the Philips Support site, find your  
product and locate the Help file for your TV.  
The Help file (a *.upg file) is compressed  
into a *.zip archive.  
1. Press  
.
2. Select [Setup] > [Update software], then  
press OK. The update assistant starts. Follow  
the on-screen instructions to complete the  
update.  
Note: If you already have the upgrade file  
5. If the Help file at the Philips Support site is  
a later version than the file in your TV, click  
it to save the file to the USB flash drive.  
6. Using the archive utility, extract the *.zip  
file to the ‘upgrades’ folder in the USB flash  
drive.  
downloaded onto a USB flash drive, connect  
it to the TV. Then, select [Setup] >  
[Software settings] > [Local updates].  
EN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7. The *.upg Help file is extracted.  
8. Disconnect the USB flash drive from the  
PC.  
Do not switch off the TV or remove  
the USB flash drive during the update.  
If a power failure occurs during the  
update, do not remove the USB flash  
drive from the TV. The TV will  
continue the update as soon as power  
is restored.  
If an error occurs during the update,  
retry the procedure. If the error  
reoccurs, contact Philips Consumer  
Care.  
1. Switch on the TV.  
2. Connect the USB flash drive containing  
the *.upg Help file to the USB connector on  
the TV. Disconnect all other USB devices  
from the TV.  
3. Press  
.
4. Select [Setup] > [Software settings]  
[Local updates].  
>
The updates screen appears.  
5. Select the '*.upg' Help file and press OK.  
A message will display the update status.  
Follow the on-screen instructions to  
complete the update and restart your TV.  
Reinstall the TV  
Reinstalling your TV resets all picture and  
sound settings, and reinstalls all TV channels.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Reinstall TV], then press OK.  
3. Follow the on-screen instructions.  
EN  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Antenna  
NonPublish  
5 Connect the TV  
Locate the antenna connector at the back of  
the TV. Insert the antenna cable securely  
into the antenna connector.  
Note: To receive DVB-S broadcasts, insert  
the antenna cable into the SAT (DVB-S)  
First connections  
Power  
connector on the side of the TV. This is  
available on certain models only.  
NonPublish  
Be sure that the power plug in the wall  
socket is accessible at all times. When  
disconnecting the power cable, always pull  
the plug, never the cable.  
Although this TV has a very low standby  
power consumption, switch off the TV using  
the power switch on the bottom of the TV if  
you do not use the TV for a long time.  
About cables  
Overview  
NonPublish  
Before you connect devices to the TV, verify  
which connectors are available on the  
device. Connect the device to the TV with  
the highest quality connection available.  
Good quality cables ensure a good transfer  
of picture and sound.  
The connections shown in this user manual  
are recommendations only. Other solutions  
are possible.  
Tip: If your device only has composite/RCA  
connectors, use a SCART-cinch adapter to  
connect the device to a SCART connector  
on the TV.  
EN  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Y Pb Pr  
Add your devices  
When you have connected a device to the  
TV, always add this device as an item in the  
home menu. With this item in the home  
menu, you can easily switch to view from  
this device.  
Use the Component Video YPbPr  
connection together with an Audio Left and  
Right connection for sound.  
Match the YPbPr connector colors with the  
cable plugs when you connect. YPbPr can  
handle High Definition (HD) TV signals.  
To add a new device, press , then select  
[Add your devices]. Follow the on-screen  
instructions.  
HDMI  
NonPublish  
An HDMI connection has the best picture  
and sound quality.  
One HDMI cable combines video and  
audio signals. Use HDMI for  
High-Definition (HD) TV signals, and to  
enable EasyLink.  
The HDMI ARC connector on the TV  
features HDMI ARC functionality. This  
allows output of TV audio to a HDMI  
ARC compliant device.  
Do not use an HDMI cable longer than  
5 meters/16.4 feet.  
SCART  
A SCART cable combines video and audio  
signals. SCART connectors can handle RGB  
video signals but cannot handle High  
Definition (HD) TV signals.  
EN  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bottom  
TV connectors overview  
NonPublish  
Rear  
NonPublish  
1. EXT 1 (SCART): Analog audio and video  
input from analog or digital devices such as  
DVD players or game consoles.  
2. DIGITAL AUDIO OUT: Digital audio  
1. SERV. U: For use by service personnel  
output to home theatres and other digital  
audio systems.  
only.  
2. EXT 2 / EXT 3 Component (YPbPr):  
3. HDMI: Digital audio and video input from  
Analog audio and video input from analog or  
digital devices such as DVD players or game  
consoles.  
3. : Stereo audio output to headphones  
or earphones.  
high-definition digital devices such as Blu-ray  
players.The second connector is available on  
certain models only.  
Available on certain models only:  
4. EXT 2 (SCART): Analog audio and video  
input from analog or digital devices such as  
DVD players or game consoles.  
EN  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. HDMI ARC: In addition to regular HDMI  
functionality, outputs TV audio to a HDMI  
ARC compliant device, such as a home  
theatre system.  
1. HDMI: Digital audio and video input from  
high-definition digital devices such as Blu-ray  
players.  
2. USB: Data input from USB storage  
5. AUDIO IN: Audio input from a  
computer.  
6. ANTENNA: Signal input from an antenna,  
devices.  
cable or satellite.  
7. VGA: Video input from a computer.  
Side  
3. CI (Common Interface +): Slot for a  
Conditional Access Module (CAM).  
4. SAT (DVB-S): Digital signal input from  
DVB-S broadcasts. Available on certain  
models only.  
Connect devices  
Blu-ray disc player  
Use an HDMI cable to connect the Blu-ray disc player to an HDMI connector on the back of the  
TV.  
EN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DVD player  
Use an HDMI cable to connect the DVD player to an HDMI connector on the back of the TV.  
DVD-Recorder  
First, use two antenna cables to connect the antenna to the DVD Recorder and the TV. (SAT is  
available on certain models only)  
Finally, use a SCART cable to connect the DVD Recorder to a SCART connector on the back of  
the TV.  
EN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Home Theatre System  
First, use an HDMI cable to connect the device to the TV.  
Finally, use a digital audio cinch cable to connect the device to the TV. (not required for HDMI  
ARC)  
Audio and video synchronization (sync)  
EasyLink  
If the sound does not match with the video  
To automatically mute the TV speakers  
on screen, you can set a delay on most DVD  
when content is played from your Home  
Home Theatre Systems to match the sound  
Theatre System, enable EasyLink. For more  
and video.  
information, see Connect the TV > Use  
Philips EasyLink > Configure TV speakers  
EN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dig. receiver/satellite  
First, use two antenna cables to connect the antenna to the receiver and the TV.  
Finally, use a SCART cable to connect the receiver to the back of the TV.  
Dig. receiver and DVD-R  
First, use three antenna cables to connect the digital receiver and the DVD Recorder to the TV.  
EN  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Then use a SCART cable to connect the digital receiver to the TV.  
Finally, use two SCART cables to connect the two devices and the TV.  
Dig. receiver, DVD-R and HTS  
First, use three antenna cables to connect the two devices and the TV.  
EN  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Then use a two SCART cables to connect the digital receiver to the DVD Recorder and the DVD  
Recorder to the TV.  
Then use an HDMI cable to connect the Home Theatre System to the TV.  
Finally, use a digital audio cinch cable to connect the Home Theatre System to the TV.  
EN  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dig. HD receiver  
First, use two antenna cables to connect the Digital HD receiver to the TV.  
Use an HDMI cable to connect the Digital HD receiver to the TV.  
Enable game mode  
To prevent picture delay, set the TV to  
[Game] mode.  
Connect more devices  
1. Press  
.
Game console  
2. Select [Smart picture] > [Game], then  
press OK.  
3. Press  
The most practical connections for a game  
console are at the side of the TV. However,  
more connectors are available at the back of  
the TV if needed.  
to exit.  
EN  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The most practical connections for a game console are at the side of the TV.  
If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to  
connect the game console to the back of the TV.(On certain models, EXT2 is labelled EXT3).  
EN  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dig. camera  
To view pictures on your digital camera,  
connect it to the USB connection at the side  
of the TV and switch it on. If the content of  
your camera does not appear automatically,  
you may need to enable Picture Transfer  
Protocol (PTP) on the camera. Refer to the  
camera's user manual for instructions.  
Dig. camcorder  
The most practical connection for a camcorder is at the side of the TV.  
If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to  
connect the camcorder to the back of the TV. (On certain models, EXT2 is labelled EXT3).  
EN  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Set the channel you want to decode.  
Channel decoder  
4. Select [Status], then the location of the  
NonPublish  
decoder.  
5. Press OK.  
Before using a SCART digital channel  
decoder, select the channel to decode and  
assign the decoder to the SCART connector.  
1. Press  
.
2. Select [Setup] > [Channel settings] >  
[Decoder] > [Channel].  
PC  
NonPublish  
Connect a computer using one of the following cables:  
HDMI cable  
DVI-HDMI cable  
EN  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI cable and HDMI-DVI adaptor  
VGA cable  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [On] or [Off], then press OK.  
Use Philips EasyLink  
Enable or disable EasyLink  
NonPublish  
EasyLink features  
Philips EasyLink provides several features that  
enable you to control devices that are  
connected via HDMI. Connected devices  
must support the HDMI-CEC standard, and  
must be properly configured for EasyLink to  
work.  
NonPublish  
With Philips EasyLink enabled, the following  
features are available:  
One-touch play  
When you play content from a HDMI-CEC  
compliant device, the TV switches on from  
standby, and switches to the correct source.  
One-touch standby  
When you connect your TV to a  
HDMI-CEC compliant device, pressing  
the TV remote control switches the TV and  
all connected HDMI devices to standby  
mode.  
Note: HDMI-CEC functionality is known by  
other names on other brands. Some  
examples are Anynet (Samsung), Aquos Link  
(Sharp) or BRAVIA Sync (Sony). Not all  
brands are fully compatible with Philips  
EasyLink.  
on  
To enable or disable EasyLink  
Note: Do not enable Philips EasyLink if you  
do not intend to use it.  
EN  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
System audio control  
Audio only mode  
When you connect your TV to, for example,  
a HDMI-CEC compliant Home Theatre  
System (HTS), your TV speakers  
automatically mute and audio from the TV  
plays through the HTS.  
Audio only mode enables you to play audio  
from a connected Philips EasyLink device  
through the TV speakers while the TV is in  
standby.  
Press  
to receive audio from the  
For more information about system audio  
control and other types of TV speaker  
configurations, see Connect the TV > Use  
Philips EasyLink > TV speakers (Page 53).  
connected Philips EasyLink device.  
If available, audio only mode is enabled.  
Accept the prompt on the TV to enable  
audio only mode.  
Control the audio playback with the TV  
remote control.  
EasyLink Remote Control  
EasyLink Remote Control allows you to  
control HDMI-CEC compliant devices using  
your TV remote control.  
Enable or disable EasyLink Remote  
Control  
To enable EasyLink Remote Control, see  
Connect the TV > Use Philips EasyLink >  
Enable or disable EasyLink Remote Control  
Pixel Plus Link  
Connected Philips EasyLink devices may  
apply their own picture quality processing to  
a video, before streaming it to the TV. This  
may interfere with the image processing of  
the TV. Enable Pixel Plus Link to discard  
picture quality processing from connected  
Philips EasyLink devices.  
NonPublish  
Caution: This is an advanced setting. Verify  
that all connected HDMI-CEC compliant  
devices support this setting. Devices that do  
not support this setting will not respond to  
commands from the TV remote control.  
1. Press  
.
2. Select [Setup] > [TV settings]  
>
[EasyLink] > [EasyLink Remote Control] >  
[On] or [Off].  
3. Press OK to activate.  
Notes:  
To enable Pixel Plus Link  
If you cannot exit from the connected  
device's menu, press  
To switch back to TV control, press  
and select [Watch TV].  
To control another device, press  
and select the device from the home  
menu.  
1. Press  
.
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [Pixel Plus link] > [On].  
3. Press OK to activate.  
Auto subtitle shift  
Auto subtitle shift displays subtitles from  
Philips EasyLink compliant Home Theatre  
Systems over the video image on your TV.  
The video image is thus stretched across the  
whole of your TV display, without the need  
to create a separate subtitle bar at the  
bottom of the screen.  
A summary of EasyLink buttons you can  
use with the TV remote control is  
available at Connect the TV > Use  
Philips EasyLink > EasyLink buttons  
To enable auto subtitle shift  
EasyLink buttons  
NonPublish  
1. Press  
.
Control HDMI-CEC compliant devices with  
the following buttons on the TV remote  
control.  
2. Select [Setup] > [TV settings] >  
[EasyLink] > [Auto subtitle shift].  
3. Select [On], then press OK to activate.  
OK: Starts, pauses or resumes playback  
on the connected device. Also activates  
a selection or accesses the menu of the  
device.  
EN  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
(Previous) /  
backwards and forwards on the  
connected device.  
Numeric buttons: When EasyLink is  
enabled, selects a title, chapter or track.  
(Next): Searches  
3. Select one of the following options, then  
press OK:  
[Off]: Turn off TV speakers.  
[On]: Turn on TV speakers.  
[EasyLink]: TV audio continues to be  
streamed through the TV speakers.  
Switch the TV audio to the connected  
HDMI-CEC audio device through the  
experience menu.  
(Options): Displays the menu of the  
connected device. When  
the TV menu is displayed.  
(Standby): Press to enable one-touch  
standby. This switches the TV and the  
connected device to standby.  
is pressed,  
[EasyLink autostart]: Turn off TV  
speakers automatically and streams TV  
audio to the connected HDMI-CEC  
audio device.  
Other EasyLink buttons are available via  
On-Screen Remote Control (OSRC).  
Switch TV audio in experience menu  
If [EasyLink] or [EasyLink autostart] are  
selected, access the experience menu to  
switch the TV audio.  
To access the OSRC  
1. While watching a connected device, press  
.
1. While watching TV, press  
.
2. Select [Show remote control], then press  
OK.  
2. Select [Speakers], then press OK.  
3. Use the Navigation buttons and OK to  
select and use an on-screen button.  
3. Select one of the following, then press  
OK:  
[TV]: On by default. Streams TV audio  
through TV speakers until the  
4. Press  
to exit.  
connected HDMI-CEC audio device  
switches to system audio control.  
Thereafter, TV audio is streamed  
through the connected device.  
Configure TV speakers  
NonPublish  
You usually connect the TV to a HDMI-CEC  
compliant device such as a HTS using both a  
HDMI cable for video and a digital audio  
cable for audio. You can output TV audio  
through the HDMI cable solely, provided  
both the TV and device are HDMI ARC  
compliant (see Connect the TV > Use  
Philips EasyLink > Use HDMI ARC (Page  
[Amplifier]: Streams audio through the  
connected HDMI-CEC device. If system  
audio mode is not enabled on the  
device, audio will continue to stream  
from TV speakers if [EasyLink] was  
selected. If [EasyLink autostart] was  
53)).  
enabled, the TV prompts the  
connected device to switch to system  
audio mode.  
Configure TV speakers  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [TV speakers].  
EN  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use HDMI ARC  
NonPublish  
The HDMI 1 connector is HDMI 1.4-Audio Return Channel (ARC) compliant. Use it to output  
audio to a HDMI ARC compliant audio device, such as a Home Theatre System.  
Refer to the documentation from your  
service operator on how to insert a  
smart card into the Conditional Access  
Module.  
HDMI ARC allows you to use Philips  
EasyLink to output TV audio directly to a  
connected audio device, without the need  
for an additional digital audio cable.  
Be sure that the device is HDMI-CEC and  
ARC compliant, and that the TV is  
connected to the device using a HDMI cable  
attached to HDMI ARC connectors.  
Enable or disable HDMI ARC  
Note: Enabling HDMI ARC automatically  
adds the device to the home menu.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[EasyLink] > [HDMI 1 - ARC] > [On] or  
[Off].  
3. Press OK to activate.  
Use a CAM  
Insert and activate a CAM  
1. Switch off the TV.  
NonPublish  
2. Follow the directions printed on the CAM  
and insert the CAM into the Common  
Interface at the side of the TV.  
3. Push the CAM in as far as it will go and  
wait for the CAM to be activated. This may  
take several minutes. Do not remove the  
CAM from the slot when in use as digital  
services will be deactivated.  
Caution: Be sure to follow the instructions  
described below. Wrong insertion of a  
Conditional Access Module (CAM) may  
damage both the CAM and your TV.  
Notes:  
This TV supports CI as well as CI+. CI+  
allows service providers to offer  
premium HD digital programs with a  
high level of copy protection.  
EN  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Access CAM services  
NonPublish  
1. After inserting and activating the CAM,  
press  
.
2. Select [Common interface], then press  
OK.  
3. Select the CAM provider and press OK.  
Watching a CAM service  
If a CAM is inserted and subscription fees  
are paid, the TV shows the programme from  
the digital TV service provider. The  
applications, functions, the content and the  
onscreen messages vary per CAM service.  
EN  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You forgot the code to unlock the child  
lock feature:  
Enter ‘8888’.  
The TV menu is in the wrong language:  
6 Troubleshooting  
Contact us  
Change the TV menu to your preferred  
language.  
For more information, see Set up the TV >  
Change language settings > Menu language  
If you cannot resolve your problem, refer to  
the FAQs for this TV at  
If the problem remains unresolved, contact  
Philips Consumer Care in your country as  
listed in the leaflet accompanying your  
product.  
When turning the TV on/off/to standby,  
you hear a creaking sound from the TV  
chassis:  
No action is required. The creaking sound is  
normal expansion and contraction of the TV  
as it cools and warms up. This does not  
impact performance.  
Make a note of your TV model and serial  
number before you contact Philips. These  
numbers are printed on the back of the TV  
and on the packaging.  
Warning: Do not attempt to repair the TV  
yourself. This may cause severe injury,  
irreparable damage to your TV or void  
your warranty.  
When the TV is in standby mode, a startup  
splash screen is displayed, then returns to  
standby mode:  
This is normal behavior. The startup screen  
is displayed when the TV is disconnected  
from the mains and reconnected.  
To switch on the TV from standby, press  
on the remote control or press any key on  
the side of the TV.  
General TV issues  
The TV does not switch on:  
Disconnect the power cable from the  
power outlet. Wait for one minute  
then reconnect it.  
TV channel issues  
Check that the power cable is securely  
connected.  
Check that the power switch at the  
Previously installed channels do not appear  
in the channel list:  
Check that the correct channel list is  
selected.  
bottom/back of the TV is switched on.  
The TV does not respond to remote  
control or side controls when switched on  
The TV requires some time to start up.  
During this time, the TV will not respond to  
the remote control or side controls. This is  
normal behavior.  
No digital channels were found during the  
installation:  
Check that the TV supports DVB-T, DVB-C  
or DVB-S in your country. See the listed  
countries on the back of the TV.  
The standby light on the TV blinks red:  
Disconnect the power cable from the power  
outlet. Wait until the TV cools down before  
reconnecting the power cable. If the blinking  
reoccurs, contact Philips Consumer Care.  
Picture issues  
The TV is on, but there is no picture:  
Check that the antenna is properly  
connected to the TV.  
Check that the correct device is  
selected as the TV source.  
EN  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
There is sound but no picture:  
Check that the picture settings are correctly  
set.  
Sound issues  
There is picture but no sound from the TV:  
If no audio signal is detected, the TV  
automatically switches the audio output off  
this does not indicate malfunction.  
There is poor TV reception from an  
antenna connection:  
Check that the antenna is properly  
connected to the TV.  
Check that all cables are properly  
connected.  
Loud speakers, unearthed audio  
devices, neon lights, high buildings and  
other large objects can influence  
reception quality. If possible, try to  
improve the reception quality by  
changing the antenna direction or  
moving devices away from the TV.  
If reception on only one channel is  
poor, fine tune this channel.  
Check that the volume is not set to 0.  
Check that the sound is not muted.  
Check that the TV speakers setting is  
on in the sound menu.  
Check that the TV audio output is  
connected to the audio input on the  
HDMI CEC enabled/EasyLink-compliant  
HTS device. Sound should be heard  
from the HTS speakers.  
There is poor picture quality from  
connected devices:  
There is picture but sound quality is poor:  
Check that the sound settings are correctly  
set.  
Check that the devices are connected  
properly.  
Check that the picture settings are  
correctly set.  
There is picture but sound comes from  
one speaker only:  
The TV did not save your picture settings:  
Check that the TV location is set to the  
home setting. This mode offers you the  
flexibility to change and save settings.  
Verify that sound balance is set to the  
center.  
HDMI connection issues  
The picture does not fit the screen; it is  
too big or too small:  
Try using a different picture format.  
The picture position is incorrect:  
Picture signals from some devices may not fit  
the screen correctly. Check the signal output  
of the device.  
There are problems with HDMI devices:  
Note that HDCP (High-bandwidth  
Digital Content Protection) support can  
delay the time taken for a TV to display  
content from a HDMI device.  
If the TV does not recognize the HDMI  
device and no picture is displayed, try  
switching the source from one device  
to another and back again.  
The picture from broadcasts is scrambled:  
You may need to use a Conditional Access  
Module to access content. Check with your  
operator.  
If there are intermittent sound  
disruptions, check that output settings  
from the HDMI device are correct.  
If you use an HDMI-to-DVI adapter or  
HDMI to DVI cable, check that an  
additional audio cable is connected to  
AUDIO L/R or AUDIO IN (mini-jack  
only).  
An "e-sticker" banner displaying  
information appears on the TV display:  
The TV is in [Shop] mode. Remove the  
e-sticker by setting the TV to [Home] mode,  
then restarting the TV. See Setup the TV >  
Change other settings > TV location (Page  
35) for more information.  
EN  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
You cannot use EasyLink features:  
Check that your HDMI devices are  
HDMI-CEC compatible. EasyLink features  
only work with devices that are HDMI-CEC  
compatible.  
If a HDMI-CEC compliant audio device is  
connected to the TV and the TV does not  
display any mute or volume icon when the  
volume is muted, increased or decreased.  
This behavior is normal when a HDMI-CEC  
audio device is connected.  
USB connection issues  
USB device content is not displayed:  
Check that the USB storage device is  
set to ‘Mass Storage Class’ compliant, as  
described in the storage device's  
documentation.  
Check that the USB storage device is  
compatible with the TV.  
Check that the audio and picture file  
formats are supported by the TV.  
Audio and picture files do not play or  
display smoothly:  
The transfer performance of the USB  
storage device may limit the data transfer  
rate to the TV, causing poor playback.  
PC connection issues  
The computer display on the TV is not  
stable:  
Check that your PC uses the supported  
resolution and refresh rate.  
Set the TV picture format to unscaled.  
EN  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
100 Hz LCD  
7 Technical data  
Sound  
Output power (RMS): 20W  
Incredible Surround  
Clear Sound  
Virtual 2.1  
(not available on all models)  
Overview  
NonPublish  
Product information is subject to change  
without notice. For detailed product  
information, go to  
Mono/Stereo/NICAM  
(analog NICAM on certain models)  
Power and reception  
Display resolutions  
NonPublish  
NonPublish  
Power  
Computer formats - HDMI  
(resolution - refresh rate)  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60 Hz  
Mains power: AC220-240V~; 50-60Hz  
Ambient temperature: 5°C to 35°C  
For power and standby power  
consumption, see the product  
specifications at  
1360 x 768 - 60 Hz  
1280 x 1024 - 60 Hz  
1600 x 1200 - 60 Hz  
1920 x 1080 - 60 Hz  
Reception  
Antenna input: 75ohm coaxial (IEC75)  
TV system: DVB COFDM 2K/8K,  
Video playback: NTSC, PAL, SECAM  
Computer formats - VGA  
(resolution - refresh rate)  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60 Hz  
Digital TV: MPEG-4, DVB-T  
(Terrestrial), DVB-C (Cable), DVB-S  
(Satellite - on certain models only),  
MHP (Multimedia Home Platform -  
only available in Italy).  
1360 x 768 - 60 Hz  
1280 x 1024 - 60 Hz  
1600 x 1200 - 60 Hz  
1920 x 1080 - 60 Hz  
Tuner bands: VHF, UHF, S-Channel,  
Hyperband  
Video formats (resolution - refresh rate)  
480i - 60 Hz  
480p - 60 Hz  
Display and sound  
576i - 50 Hz  
Picture / Display  
576p - 50 Hz  
720p - 50 Hz, 60 Hz  
1080i - 50 Hz, 60 Hz  
1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz  
Display type: LCD Full HD W-UXGA  
Diagonal size:  
- 81cm / 32 inch  
- 94cm / 37 inch  
- 102cm / 40 inch  
- 107cm / 42 inch  
- 117cm / 46 inch  
- 132cm / 52 inch  
Aspect ratio: Widescreen 16:9  
Panel resolution: 1920x1080p, 100Hz  
Pixel Plus HD picture enhancement  
1080p 24/25/30/50/60Hz processing  
Multimedia  
Supported storage device  
USB (FAT or DOS-formatted; Mass Storage  
Class compliant only)  
EN  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Supported image files  
Bottom  
JPEG (*.jpg, *.jpeg): EXIF, JFIF, SPIFF  
Supported video and audio files  
EXT 1: SCART (RGB/CVBS)  
HDMI ARC (1): HDMI 1.4, Audio  
Return Channel (ARC) compliant  
HDMI (2): HDMI 1.3a  
(For 40PFL6XX5) HDMI (3): HDMI  
1.3a  
AVI video (*.avi): MPEG-4 SP, MPEG-4  
ASP, MPEG-4 Part 2  
AVI audio (*.avi): AC3, MPEG-1 L3,  
MPEG L2, AAC_ADTS, AAC_ISO  
DIGITAL AUDIO OUT: Coaxial  
AUDIO IN: DVI/VGA stereo 3.5mm  
mini-jack  
ANTENNA: 75ohm coaxial  
VGA: PC input  
MPEG video (*.mpg, *.mpeg, *.vob,  
*.ts): MPEG-1, MPEG-2  
MPEG audio (*.mp2, *.mp3, *.mpg,  
*.mpeg, *.vob): MPEG-1 Layer 2,  
MPEG-2 Layer 2, AC3  
Side  
MPEG-4 video (*.mp4): MPEG-4 AVC  
(H.264, L2-CIF), MPEG-4 AVC (H.264,  
L4-HD), MPEG-4 Part 2  
MPEG-4 audio (*.mp4): AAC-LC, AC3,  
AAC_ADTS, AAC_ISO, HE-AAC (v1,  
v2)  
HDMI: HDMI 1.3c  
USB  
CI (Common Interface +)  
MKV video (*.mkv): H.264  
MKV audio (*.mkv): HE-AAC, AC3  
Dimensions  
NonPublish  
Supported audio files (without video)  
Note: Dimensions and weights are  
approximate values only. Design and  
specifications are subject to change without  
notice.  
MPEG audio (*.mp3): MPEG-1 Layer 3  
WMA audio (*.wma, *.asf): WMA (v2  
to v9.2)  
LPCM audio (*.lpcm, *.pcm, *.wav, *.aif,  
*.aiff): *.lpcm and *.pcm not supported  
on all sets.  
32PFL6XX5H  
… without stand  
472mm (height) x 777mm (width) x 42mm  
(depth); 9.5 kg (estimate)  
MPEG-4 audio (*.aac, *.mp4, *.m4a):  
AAC-LC, HE-AAC (v1, v2)  
Playlists (*.pls, *.m3u)  
… with stand  
540mm (height) x 777mm (width) x 221mm  
(depth); 11.6 kg (estimate)  
Note: Multimedia file names must not  
exceed 128 characters.  
40PFL6XX5H  
...without stand  
593mm (height) x 966mm (width) x  
41.5mm (depth); 13 kg (estimate)  
Connectivity  
Rear  
… with TV stand  
641mm (height) x 966mm (width) x 242mm  
(depth); 16 kg (estimate)  
EXT 2: Component (Y Pb Pr), Audio  
L/R  
(For 40PFL6XX5) EXT 2: SCART  
(RGB/CVBS)  
32PFL3705H/32PFL3805H/32PFL5405H  
(For 40PFL6XX5) EXT 3: Component  
(Y Pb Pr), Audio L/R. Available on  
certain models only.  
... without stand  
513mm (height) x 796mm (width) x 90m  
(depth); 8.35kg (estimate)  
Headphones: Stereo 3.5mm  
mini-jack  
SERV. U: Service port  
... with stand  
559mm (height) x 796mm (width) x 221mm  
(depth); 9.67kg (estimate)  
EN  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
32PFL5605H/32PFL5625H  
... without stand  
501mm (height) x 790mm (width) x 92mm  
(depth); 10kg (estimate)  
... with stand  
542mm (height) x 790mm (width) x 221mm  
(depth); 11.5kg (estimate)  
37PFL5405H  
... without stand  
582mm (height) x 912.5mm (width) x  
84mm (depth); 9.55kg (estimate)  
... with stand  
626mm (height) x 912.5mm (width) x  
236mm (depth); 11.55kg (estimate)  
40PFL5605H/40PFL5625H/40PFL5605K/40  
PFL5705H/40PFL5805H  
... without stand  
605mm (height) x 977mm (width) x 86mm  
(depth); 13.7kg (estimate)  
... with stand  
649mm (height) x 977mm (width) x 236mm  
(depth); 16.1kg (estimate)  
42PFL5405H  
... without stand  
640mm (height) x 1019mm (width) x 83mm  
(depth); 11.38kg (estimate)  
... with stand  
683mm (height) x 1019mm (width) x  
236mm (depth); 13.38kg (estimate)  
46PFL5605H/46PFL5805H  
... without stand  
685mm (height) x 1122mm (width) x 87mm  
(depth); 17.9kg (estimate)  
... with stand  
731mm (height) x 1122mm (width) x  
268mm (depth); 21.3kg (estimate)  
52PFL5605H  
... without stand  
764mm (height) x 1255mm (width) x  
87mm (depth); 20kg (estimate)  
... with stand  
813mm (height) x 1255mm (width) x  
297mm (depth); 24kg (estimate)  
UMv 3139 137 03585 - 20110113  
EN  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
connectors, bottom • 40  
connectors, rear • 40  
8 Index  
A
D
age rating • 26  
decoder • 50  
Ambilight • 13  
default settings • 31  
demo • 31  
audio language • 34  
audio lip sync • 35  
devices, add • 21  
devices, watch • 21  
digital channels, fine tune • 33  
digital channels, overview • 14  
digital channels, subtitles • 26  
digital radio • 27  
B
bottom connectors • 40  
C
CAM, enable • 55  
digital TV • 14  
CAM, insert • 54  
dimensions • 60  
care • 10  
display resolution • 59  
channel list • 18  
channels, favorites • 25  
channels, fine tune (analog) • 34  
channels, fine tune (digital) • 33  
channels, hide or unhide • 32  
channels, install (automatic) • 32  
channels, install (manual) • 33  
channels, rename • 31  
channels, reorder • 31  
channels, switch • 20  
channels, update • 32  
child lock, age rating • 26  
child lock, overview • 26  
child lock, set code • 26  
clock • 35  
E
EasyLink, buttons • 52  
EasyLink, enable • 51  
EasyLink, features • 51  
EasyLink, RC key forward • 52  
EasyLink, TV speakers • 53  
end of use • 10  
environment efforts • 11  
EPG, enable • 25  
EPG, menu • 25  
EPG, overview • 25  
F
factory settings • 31  
favorites list, add • 25  
favorites list, select • 25  
common interface • 54  
connect device • 38  
connect, antenna • 38  
connect, channel decoder • 50  
connect, PC • 50  
G
green eco, overview • 11  
green eco, settings • 11  
connect, power • 38  
connect, USB • 27  
EN  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
H
P
HDMI • 39  
PC, connect • 50  
pc, display resolutions • 59  
picture format • 21  
picture settings • 30  
position TV • 13  
HDMI ARC • 54  
hearing impaired • 28  
home menu • 17  
home mode • 35  
power • 59  
I
R
information, on Internet • 14  
information, on-screen • 14  
install channels (automatic) • 32  
install channels (manual) • 33  
rear connectors • 40  
recycle • 10  
register product • 9  
remote control, on-screen • 17  
remote control, overview • 15  
remote control, usage • 17  
rename channels • 31  
reorder channels • 31  
K
kensington lock • 12  
L
language, menu • 34  
S
language, others • 34  
location, home or shop • 35  
location, stand or wall mount • 35  
safety • 9  
Scenea, enable • 28  
Scenea, upload picture • 28  
screen care • 10  
M
menu, add device • 18  
menu, browse • 18  
settings, assistant • 30  
settings, picture • 30  
settings, sound • 31  
shop mode • 35  
menu, channel list • 18  
menu, home • 17  
menu, language • 34  
menu, options • 19  
sleeptimer • 25  
smart card • 54  
menu, setup • 18  
smart picture • 20  
smart sound • 21  
multimedia, overview • 14  
multimedia, play files • 27  
mute TV speakers • 20  
software, digital update • 36  
software, Internet update • 36  
sound settings • 31  
specifications • 59  
standby • 19  
O
options menu • 19  
subtitle, analog • 26  
EN  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
subtitle, digital • 26  
subtitle, language • 34  
subtitles, language • 26  
switch channels • 20  
T
technical specifications • 59  
teletext 2.5 • 25  
teletext, digital text • 24  
teletext, dual screen • 24  
teletext, enable • 24  
teletext, enlarge • 24  
teletext, language • 34  
teletext, menu • 24  
teletext, search • 24  
teletext, subpages • 24  
teletext, Table Of Pages • 24  
U
universal access, enable • 28  
V
visually impaired • 28  
volume, adjust • 20  
volume, mute • 20  
W
wall mount TV • 12  
EN  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Document order number 313913703585  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Home Security System C2445M D User Manual
Petsafe Pet Fence E Z Roof User Manual
Pfaff Sewing Machine Ccreative 20 User Manual
Philips Breast Pump SCF300 User Manual
Philips Digital Photo Frame SPF2007 User Manual
Philips MP3 Player ACT400 17 User Manual
Philips Stereo Amplifier TDA8542 User Manual
Philips Stereo System FW 315C User Manual
Pioneer Marine Radio VSX 1014TX User Manual
ProForm Home Gym PFEL49050 User Manual