Philips Car Satellite TV System 210 User Manual

DTR 210  
DTR 200/14  
User Manual  
3
21  
39  
57  
Bruksanvisning  
Käyttäjän opas  
Betjeningsvejledning  
Thank you for choosing Philips.  
Need help fast?  
Read your User’s Manual first for quick tips that make using your Philips  
product more enjoyable.  
If you have read your instructions and still need assistance, you may  
access our online help at www.philips.com/support  
or call our Philips Consumer Care helpline  
to be found on the next page  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start Guide  
Connecting to a Television  
UHF Aerial  
Example TV set, rear panel  
SCART input on TV  
SCART cable  
(supplied)  
Set Top Box  
Power Supply Adaptor  
(supplied)  
SCART output  
to TV  
RF in connector  
12V DC  
Set Top Box rear panel  
Connecting to a Television and Recorder  
Example TV set, rear panel  
UHF Aerial  
SCART input on TV  
SCART cable  
(supplied)  
Set Top Box Power  
Supply Adaptor  
(supplied)  
RF In  
connector  
RF Out  
connector  
SCART output  
to TV  
12V DC  
SCART  
to VCR  
Set Top Box rear panel  
RF cable  
SCART to SCART  
cable (not supplied)  
VCR RF In connector  
VCR RF Out onnector  
Example VCR set, rear panel  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing this product which has been  
designed and manufactured to give you many years of  
trouble-free service.  
- Power outlets and extension cables may not be over-  
loaded, otherwise there is fire hazard! When purchasing  
the product, enquire for the maximum permissible cur-  
rent consumption.  
About This User Manual  
- In order to completely disconnect the device from the  
power supply, the pluggable power supply has to be dis-  
connected from the power outlet.  
This user guide contains all the information you need to  
know about how to setup and watch available 'Freeview'  
channels using your set top box.  
- Have repairs or settings on your receiver carried out by  
qualified skilled personnel only. Unauthorised opening  
and repair attempts will result in loss of warranty. The  
manufacturer accepts no liability for accidents of the  
user if the device is opened. Incorrect wiring of the con-  
nections can result in failures or malfunctions on the  
device.  
Safety and Precautions  
Safety is Important  
To ensure your safety and the safety of others, please  
ensure you read the Safety Instructions before you oper-  
ate this product.  
- Do not effect modifications on this device.  
Note: Keep this information in a safe place for future refer-  
ence.  
- Use provided cables and pluggable power supplies only.  
- During thunderstorms, devices connected to the mains  
supply may be damaged. Therefore, in case of a thunder-  
storm always disconnect the pluggable power supply  
from the power outlet.  
Safety warnings  
Before you connect and start the receiver, please observe  
the following points:  
- If you are absent for a longer period of time or during a  
thunderstorm, disconnect the receiver from the power  
supply unit and from the antenna. This also applies to  
devices connected to the receiver.  
- The device is designed for domestic use.  
- Only the functions described in these Operating  
Instructions may be carried out with this device.  
Danger of electric shock by humidity  
- If possible, keep the Operating Instructions ready at  
hand near the appliance.  
- The device may not be exposed to dripping or splashing  
water. Prevent liquids from entering into the device. In  
case of need, immediately disconnect the power plug.  
- If you hand the device on to other persons, please also  
include these Operating Instructions.  
- The device may not be used in damp locations (e. g.  
bathroom) or rooms with heavy dust accumulation.  
Danger caused by electricity  
- In the interior of the device there are hazardous volt-  
ages. Never open the housing or insert objects through  
the ventilation openings.  
- Objects filled with water, e.g. vases, may not be placed  
on the device.  
Danger of injuries by other causes  
- Only connect the device to a 230 V power outlet  
installed according to regulations, being accordingly  
fused.  
- Observe that nobody can trip over the connector  
cables.  
- The power outlet has to be easily accessible so that you  
are able to disconnect the power plug immediately if  
necessary.  
Dangers for children  
- Never leave children unattended with this device. Chil-  
dren underestimate the danger associated with electric  
appliances.  
- Observe that the connector cables are not clamped or  
squeezed.  
- Do not start the device if the device or the connector  
cables show visible damage, or if the device has fallen  
down.  
Notes with regard to the installation location  
- Install device on horizontal surface only.  
- Do not expose this device to extreme temperatures.  
Therefore:  
-Avoid direct solar radiation and radiator heat;  
-Do not obstruct the air ventilation by covering the ven-  
tilation openings with objects, like for example maga-  
zines, table cloths, curtains, etc.;  
- If an apparent damage occurs (e. g. smoke or similar)  
during operation, immediately disconnect the pluggable  
power supply from the power outlet. In doing so, always  
take hold of the plug, never of the cable.  
INTRODUCTION 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-Leave a minimum clearance of approx. 40 cm above and  
to the sides. The heat may not accumulate in the device!  
Otherwise the heat can damage the device, and there is  
fire hazard!  
Environmental Markings  
Your product has been designed and manufac-  
tured with high quality materials and components,  
which can be recycled and reused.  
- The device may not be installed close to inflammable  
material (e. g. curtains, flammable liquids, etc.).  
When this crossed-out wheeled bin symbol is attached to  
a product or his packaging, it means the product is cov-  
ered by European Directive 2002/96/EC.  
Batteries  
- Batteries are to be kept away from children.  
Please inform yourself about the local separate collection  
system for electronic products.  
- After swallowing a button cell or battery, the person  
concerned has to consult a doctor immediately.  
Please act according to your local rules and do not dis-  
pose of your old products with your normal household  
waste. The correct disposal of your old product will help  
prevent potential negative consequences for the environ-  
ment and human health.  
- Do not try to reactivate used batteries by heat, charg-  
ing, or by other means.  
- Batteries may not be thrown into the fire, disassembled,  
or short-circuited.  
The "Material recyclability symbol " affixed on  
package cardboard and user manual means these  
parts are recyclable. So do not dispose of them  
with your normal household waste.  
- Replace the batteries at least one a year to prevent  
them from leaking.  
- Always replace both batteries and use batteries of the  
same type only (e. g. alkaline cells or zinc/carbon).  
The "Material recyclability symbol " affixed on  
plastic packaging parts means these parts are  
recyclable.So do not dispose of them with your  
normal household waste.  
- If you are absent for a longer time, remove the batteries  
from the RC unit.  
Miscellaneous notes  
The "Green Dot" affixed on cardboard means  
PHILIPS pays a financial duty to the "Avoidance  
and Recovery of Packaging Waste" organization.  
- Do not place open fire sources, like for example burning  
candles, on the device.  
- The antenna that is used has to be grounded.  
- Only switch the device on after the connections with  
the antenna and the SCART cable have been established.  
- The bottom side of the device features the device feet.  
Because the furniture or floor surfaces consist of vari-  
ous materials and are treated with various care prod-  
ucts, it cannot be completely ruled out that some of  
these materials contain components affecting and mois-  
tening the feet of the device. If required, place a non-slip  
mat underneath the feet.  
- Opening the device results in loss of warranty.  
This symbol indicates that the adapter is a  
Class II appliance and does not require an earth  
connection.  
This symbol indicates that the adapter is for  
indoor use only.  
This symbol indicates that the adapter conforms  
to CE regulations.  
6 INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Remove your Digital Set Top Box carefully from the box,  
and remove the packaging from each part.  
Identification of Parts  
Remote Control  
In the Box  
You will find the following items:  
- Digital Set Top Box  
Power On/Off  
(Stand-By)  
- Remote Control (AA batteries)  
- Power supply 230 V AC/50 Hz to 12 V DC  
Number keys  
- SCART-to-SCART cable  
(for Digital Set Top Box to SCART input connector on  
TV set)  
EPG key  
INFO key  
EXIT key  
BACK / P<P key  
Cursor keys  
- User Manual (This publication)  
OK key  
Volume up/down  
Colour keys  
If any of these items are damaged or missing,  
please contact us at the Philips Consumer Care helpline  
found on page 3.  
Channel up/down  
Mute key  
I-II key  
(Audio selection)  
APP key  
Please make sure that you have the model number of your  
set top box, before contacting us. The label showing the  
type and serial number is underneath your receiver.  
TV/STB key  
MENU key  
(subtitle selection)  
TIMER/REC key  
Batteries are removable from the remote using  
common household tools (like a screwdriver…)  
The batteries supplied do not contain hazardous sub-  
stances such as Mercury, Cadmium, or Lead.  
However, they must not be disposed of with your house-  
hold waste but to a local separate collection system.  
GETTING STARTED 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Set Top Box  
Front view  
IR Receiver / Red LED, Normal Operation - off, Standby - on  
Rear view  
RF out  
Scart output  
connector for  
TV  
Power Supply in,  
12 V DC  
RF in  
Scart output  
connector for VCR  
and DVD units  
SPDIF  
(Digital audio out)  
from Aerial  
Mains Adaptor  
Power cable (1.5 m)  
Power connector for connection to  
Set Top Box  
Plug this into a 230V AC  
outlet socket  
Note that the only recommended way to disconnect the  
Digital Set Top Box from the mains supply is to remove  
the adaptor from the mains socket. If the mains socket is  
fitted with a switch, this could be used instead.  
The Remote Control  
Using the Remote Control  
To use the remote control, point it towards the front of  
the set top box.  
The remote control will not operate if its path is blocked.  
Warning:  
To 230V AC  
Sunlight or very bright light will decrease the  
sensitivity of the remote control.  
Set Top Box  
mains supply  
Power Supply Adaptor  
+12V DC  
Mains adaptor  
A mains power adaptor has been supplied for powering  
this equipment. It has an integral cable terminated in a  
power connector to plug directly into the 12V connector  
on the back of the Digital Set Top Box. The adaptor is  
shown on the right.  
Set Top Box rear panel  
Plug the cable into the 12V DC connector on the rear  
panel. Insert the adaptor body into a suitable mains outlet  
socket.  
8 GETTING STARTED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Digital Set Top Box to other equipment  
The following diagrams are of typical configurations only, and may differ slightly to your existing external equipment. If you are  
unsure on how to connect to your set top box, always consult your manufacturer's user guide supplied with your equipment.  
Connecting to a Television and DVD player  
UHF Aerial  
Example TV set, rear panel  
SCART input on TV  
SCART to SCART  
cable (supplied)  
Set Top Box Power  
Supply Adaptor  
(supplied)  
SCART  
output  
to TV  
RF In  
RF Out  
connector  
connector  
12V DC  
SCART  
to DVD player  
Set Top Box rear panel  
SCART to SCART  
cable (not supplied)  
Example DVD player, rear panel  
If you decide to connect a DVD player or recorder to the VCR Scart of your digital receiver, we advise to set the DVD out-  
put format to CVBS or PAL. Refer to the user manual of your DVD player or recorder.  
You can use a S/Pdif connector to connect your Set Top Box to a digital sound input device, such as a receiver.  
Connecting to a TV and audio equipment  
UHF Aerial  
Example TV set, rear panel  
SCART input on TV  
SCART to SCART  
Set Top Box Power  
cable (supplied)  
Supply Adaptor  
(supplied)  
RF Out  
connector  
SCART  
output  
to TV  
RF In  
connector  
12V DC  
SPDIF  
Digital audio out  
Set Top Box rear panel  
Example audio equipment, rear panel  
GETTING STARTED 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
- By using the arrow buttons or , you change the  
displayed values,  
Switch-on/switch-off  
Switch the receiver on by pressing the ON/OFF button  
(standby button) on the remote control and wait until you  
see the welcome image on your screen.  
- By using the arrow buttons or , you switch  
between the individual setting possibilities.  
4 Then highlight the OK field by using the arrow button  
The LED is off if the receiver is switched on.  
or behind adopt, and press the OK button.  
When you switch on your receiver for the first time, the  
LED is blinking while the software is loading. Follow the  
steps explained in the section Initial installation on this  
page.  
The next window is displayed:  
When the reciever is in stand-by mode the LED is red.  
During a software update process the LED is blinking.  
Initial installation  
After the first switch-on, you'll receive the following wel-  
come window:  
Note: The displayed values for the start and stop frequency  
can normally be maintained.  
5 If desired, change the values for the start and stop fre-  
quency by using the arrow buttons or.  
6 By means of the arrow buttons or, you define the  
channels to be selected: all channels, or channels that  
are free-to-air only.  
7 Then highlight the OK field by using the arrow button  
or next to start scan mode, and press the OK  
button.  
1 Press the OK button to proceed to the next page.  
The scan mode is started. The screen dialog thereby pro-  
vides information on the progress of the channel search.  
2 On the next page, select the desired language by pressing  
the arrow button or , and again press the OK  
button.  
The settings window is displayed:  
Note: By pressing the EXIT button, you can stop the scan  
mode at any time.  
As soon as the search is completed, an according message  
is displayed. Acknowledge this and the following message  
by OK, in order to proceed to the TV replay.  
Note: Also observe the information messages displayed on the  
screen. These will help you to set the correct values. Also with  
regard to further operation, information messages are dis-  
played.  
3 Now successively set the desired values. In doing so,  
observe the following:  
10 OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
banner by pressing the INFO button again. The  
extended information banner supplies further details with  
regard to the current programme.  
Change of channel  
You can change the channel in different ways:  
- By pressing the channel button + or -.  
- By pressing the arrow button or .  
- By pressing the Back / P<P button, you switch  
between the two last selected channels.  
- By selecting the channel directly via the channel list, see  
page 12.  
- By entering the memory number in the channel list. For  
this purpose, enter the number via the numerical but-  
tons. If, for instance, the memory number is 0014,  
quickly press the numerical buttons 1 and 4 successively.  
The zeros do not have to be entered.  
Observe:  
Volume control  
- If the text is more extensive, it is distributed to several  
pages. In the previous example illustration, for instance,  
page 1 of 3 (1/3) is displayed. By repeatedly pressing the  
OK button, you browse the pages (arrow buttons ꢂ  
and are also possible).  
- Use the volume buttons + and - for increasing or  
decreasing the volume, or  
- If you press the INFO or arrow button , informa-  
tion on the next programme is displayed. By pressing  
the arrow button , you return to the information on  
the current programme.  
- use the arrow buttons or for this purpose.  
Mute function  
By pressing the mute button, the sound reproduction is  
stopped. The sound is audible again if you ...  
Note: The extended information banner is not automatically  
closed.  
- ... press the mute button again, or  
2 Press the EXIT button in order to close the information  
- ... press one of the volume control buttons.  
banner.  
Calling up information banner  
Every time you change the channel, the information ban-  
ner is displayed.  
Using options  
Some channels occasionally provide several camera per-  
spectives, sound tracks and/or teletexts.  
If a channel provides one or more of these options, the  
respective button name is displayed in the right corner  
when calling up the channel, whereby also several names  
can be displayed, e. g. TEXT and I-II.  
1 Press the INFO button to call up the information banner  
without changing the channel.  
The information banner displays the selected channel  
memory number and the channel name. In addition, the  
time is displayed on the left edge of the information ban-  
ner.  
This means that, for instance, a sound, caption, or text  
selection is provided.  
The display bar on the right next to the time graphically  
indicates the programme time that has already elapsed.  
The lower menu line displays the current and the next  
programme including its broadcasting time. After several  
seconds, the information banner is automatically hidden  
again.  
Note: You can define the display time of the information ban-  
ner for yourself, or completely prevent the automatic display,  
see “Menu settings” on page 17.  
While the information banner is displayed on the lower  
screen edge, you can call up the extended information  
OPERATION 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use the options:  
Using channel list  
1 Call up the desired channel.  
1 Press the LIST/FAV button to call up the channel list.  
2 Press the I-II button for sound selection or the APP  
Note: If no other window on the screen is opened, you can also  
call up the channel list by pressing the OK button.  
button for caption selection.  
- If a teletext is offered, you can call it up by using the  
TEXT button.  
This list contains all TV channels the device has found and  
stored during automatic channel scan.  
- Via the OPT button you can also call up the options.  
- In case of several options, repeatedly press the OPT  
button, in order to select the desired option.  
3 By using the arrow buttons / / / , select the  
desired option and press the OK button. The selected  
option is called up, and the option window is closed.  
Using teletext  
1 Press the TEXT button  
to call up the teletext.  
Note: You possibly also have to press the OK button in order  
to display the teletext and to specify whether you want to use  
the teletext of your TV, or that of the receiver.  
Note: If you again press the LIST/FAV button, the favourites  
list is displayed. This individual channel list only contains the  
channels you have "favoured". For further information on  
this, see page 13. Favourites are indicated by an asterisk in the  
channel list.  
Operation in detail:  
- Via the numerical buttons, you can skip to a specific  
page.  
2 Use the arrow buttons / / / to select the  
desired channel from the list.  
- Via the MENU button, you directly skip to page 100,  
via the EPG or LIST/FAV button to page 300.  
- By using the arrow buttons or , you highlight  
the next or the previous channel in the list.  
- Via the arrow buttons and , you respectively skip  
to the next or previous page. For this purpose, you can  
also press the red or the green colour button.  
- By using the arrow buttons or , you skip eight  
positions in the channel list forwards or backwards.  
- By pressing the yellow or the blue colour button, you  
respectively skip 10 pages forwards or 10 pages back-  
wards, relating to the next full unit of ten, e. g. 133 >  
140 > 150, etc.  
3 Press the OK button after you have selected the desired  
channel.  
The programme of the selected channel is displayed in the  
background; the channel list remains open for another  
several seconds.  
- By means of the channel buttons + and -, you respec-  
tively skip 100 pages forwards or 100 pages backwards,  
relating to the next full unit of hundreds, e. g. 462 > 400  
> 300, etc.  
During this time, you can select another channel by using  
the arrow buttons, or press the OK button in order to  
close the channel list immediately.  
- Via the arrow buttons and , you can highlight a  
page number on context pages and directly skip to the  
selected page by pressing the OK button.  
Note: If the device is switched to radio mode, you can also  
carry out the previously described actions in the same manner  
for the stored radio channels.  
- The teletext display is enlarged if you press the I-II but-  
ton. By pressing this button again, the teletext is dis-  
played in its normal size again.  
- The automatic turning of a subpage (e. g. page 3/6) is  
interrupted if you press the TIMER/REC button.  
- By pressing the TEXT button again, the teletext is  
transparently applied over the TV picture; pressing the  
button again, completely hides the teletext.  
- By using the Back / P<P button, you switch between  
the teletext and transparent text.  
2 Completely hide the teletext by pressing the EXIT or  
TEXT button  
.
12 OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Press the OK button to store the channel at the  
Creating and Editing channel list  
desired position.  
Possibly the channel list may appear too complex to you  
or contain channels that you are not interested in watch-  
ing.  
Deleting channels in the favourite list  
1 Highlight the channel you want to delete by using the  
arrow buttons or .  
Via the main menu, you can edit and create your own  
favourite list.  
2 Press the red colour button.  
1 Press the MENU button.  
3 To delete all the channels in the favourite list, press the  
yellow colour button  
2 Select the menu item Sort Channels by the arrow but-  
tons or and press the OK button.  
Extended installation  
In the main menu you can choose between automatic  
scan mode and expert scan mode via automatic  
channel scan.  
3 After you have carried out the desired settings, press the  
EXIT button in order to close the window.  
Defining channels as your favourites  
The favourites list contains all channels you have defined  
as favourites. By means of this list, you can create a per-  
sonalised channel list.  
After the initial installation, see page 10, it may be  
required to search for channels again, or to add specific  
channels that are additionally broadcasted.  
1 Select the channel you want to indicate as a favourite by  
Note: In order to carry out a new initial installation, you have  
to reset the device to its default settings, see page 16.  
using the arrow buttons or .  
2 Press the OK button to add the channel to the favourite  
list.  
Automatic scan mode  
3 Repeat this process with all channels that you want to  
This scan mode usually is the right one, because during  
this scan mode normally all channels are found automati-  
cally.  
indicate as favourites.  
Note: The previously described functions are also provided to  
you with regard to the radio channel list.  
Press the RADIO button to call up the overview for the radio  
channels. You can return to the TV channel list by pressing the  
RADIO button again.  
1 Only if you use an active antenna (otherwise continue  
from point 4.): Highlight the antenna setting and press  
the OK button.  
2 Switch the active antenna On by using the arrow button  
or .  
Shifting channels in the favourite list  
3 Press the EXIT button.  
You can individually set the sequence of the channels  
within the channel list.  
4 Highlight the automatic scan mode and press the OK  
button.  
1 Press the arrow button to highligt and edit the  
favourite list.  
5 Set the start or stop frequency via the arrow button ꢀ  
or .  
2 Highlight the channel you want to shift by using the arrow  
buttons or .  
6 Specify by the arrow buttons whether all channels or  
channels that are free-to-air only are to be searched.  
3 Press the OK button to confirm the channel to be  
shifted.  
7 Then highlight OK and press the OK button to start the  
automatic scan mode  
4 Shift the highlighted channel to the desired position by  
using the arrow buttons or .  
Following, the scan mode is started. After the search is  
completed, the following is displayed:  
OPERATION 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EPG  
The electronic programme guide (EPG) offers you an  
overview of all programmes to be broadcasted in the next  
week on the current channel.  
Observe:  
- Not all channels offer an extensive EPG.  
8 By using the arrow button or , choose whether  
- Many broadcasting services broadcast the current day  
programme but do not offer detailed descriptions.  
- the channels found are to be added to the old list  
(standard setting),  
- There are broadcasting services that do not offer any  
EPG information.  
- the old channel list is to be overwritten,  
- the new found channels are to be discarded.  
- Due to the progressive technical development, more  
and more broadcasting services will extend this offer in  
the future.  
9 Then press the OK button.  
Expert scan mode  
1 Select the desired channel.  
This type of scan mode enables the specific search for an  
individual channel. This in particular makes sense if you  
only want to include one individual channel into your  
channel list and you know the information on the channel  
and frequency.  
2 Press the EPG button to call up the electronic pro-  
gramme guide.  
1 Highlight the expert scan mode and press the OK but-  
ton.  
The following functions are offered to you by the EPG:  
- If you require more information on a programme, high-  
light it by using the arrow button or , and press  
the INFO button.  
2 Successively select the adjustable values by using the  
- Change to the programme of another day by using the  
arrow button . By means of the arrow button  
you can return.  
arrow button or .  
- The desired frequency is set by the arrow button ꢀ  
- In order to switch between the programmes of the  
afternoon and evening, press the colour buttons dis-  
played in the EPG.  
or .  
- The frequency in MHz is entered via the numerical  
buttons of the remote control.  
Note: Depending on the time of day, also "tomorrow" may be  
displayed.  
- The desired band width is set via the arrow buttons.  
3 Choose whether all channels or channels that are free-  
- By pressing the channel + or - button, you can view  
the EPG of another channel.  
to-air only are to be searched for.  
4 Then highlight OK and press the OK button to start the  
- If you want to adopt a programme into the timer list,  
highlight it and press the TIMER/REC button.  
Acknowledge the following request by pressing the OK  
button.  
expert scan mode.  
Following, the scan mode is started.  
- If some channels were found, you receive the same  
request as with regard to the automatic scan mode, see  
previous paragraph.  
Note: Detailed information on the subject "timer“ can be  
found in the next paragraph.  
- If no channels were found, a message is displayed. Press  
the OK button.  
3 Close the EPG by pressing the EXIT button .  
14 OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer editing  
Timer  
1 Select the desired programme and press the OK button.  
By means of the timer setting, you can switch your  
receiver on and off at a specific time, for instance, in order  
to allow for the recording with a video-tape recorder. The  
device then automatically switches on in the standby  
mode. If the device is already switched on, the device  
automatically switches to the selected programme.  
Note: Remember to program your video-tape recorder to the  
respective time.  
Adding programme to timer list  
The timer function is included into the timer list via the  
EPG, see previous paragraph.  
2 Alter the displayed settings by using the arrow and  
numerical buttons. In doing so, you can:  
1 Open the  
- change the date (month and day)  
EPG and highlight the desired programme.  
- the time (starting time and duration)  
2 Press the TIMER/REC button.  
- the cycle (interesting for series and regularly recurring  
programmes)  
3 Then highlight OK behind adopt, and press the OK but-  
ton.  
Switching off current timer functions  
Note: During a timer programme, only few buttons  
can be activated: I-II, APP, OPT, as well as the volume  
buttons + and -, as well as the mute button.  
To switch off the timer function:  
3 Press the OK button.  
1 Press on / off.  
The window is closed and the selected programme is  
stored in the timer list.  
A programme message is displayed.  
2 Press the OK button.  
Editing timer list  
During the normal programme replay, press the TIMER/  
REC button to open the timer list.  
Deleting (a) programme(s)  
1 Select the desired programme.  
2 Press the respective colour button:  
red: the selected programme is deleted  
yellow: all programmes are deleted.  
3 Press the OK button to acknowledge the following  
request.  
OPERATION 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: Depending on your antenna, you can possibly also carry  
out settings on your antenna.  
Miscellaneous functions  
Restoring default settings  
5 Press the EXIT button 1x and acknowledge the selec-  
tion system information by using the OK button.  
Here you find technical information on your device. This  
information normally is only relevant with regard to sup-  
port.  
You can reset the device to default settings. In doing so,  
the individually composed favourites list is deleted.  
1 Press the MENU button to open the main menu.  
6 Press the EXIT button twice to return to the normal TV  
2 Highlight the item settings by using the arrow buttons  
programme.  
or and press the OK button.  
Displaying the time  
3 Highlight the item calling up default settings and press  
the OK button.  
1 Press the TEXT button  
to receive a time display on  
the screen during programme replay.  
2 Press any TEXT button to hide the time again.  
Switching between set top box and TV  
1 Press the TV/STB key to switch between the set top box  
and the TV signal.  
Carrying out software update  
Note: For this purpose, the device has to be set to standby  
operation.  
4 Set yes by using the arrow button , and press the OK  
Every night between 1 am and 5 am, the device checks  
whether a software update is available. If this is the case,  
you''ll receive an according message when switching the  
receiver on the next time, and you can start the software  
update.  
button.  
The device carries out a reboot. It switches off, and  
shortly afterwards switches on again.  
5 Carry out an initial installation, see page 10.  
You can also start the search process manually.  
Displaying channel and system information /  
adjusting the antenna  
1 Open the main menu and select the option system  
information from the field cheannel and system  
information.  
This function (nearly) solely serves to supply information  
on one channel. However, you can use it for adjusting your  
antenna and for improving the television reception.  
2 Highlight the item software update by using the arrow  
buttons .  
1 Press the MENU button to open the main menu.  
3 Press the OK button to start the software update.  
2 Highlight the item channel and system information by  
using the arrow buttons or , and press the OK  
button.  
Radio  
3 Select the item channel information and press the OK  
Note: A digital radio programme currently is not broadcasted  
in all countries via antenna.  
button.  
1 If a digital radio programme is broadcasted in your coun-  
try, press the RADIO button to receive it.  
2 In order to view the TV programme again, press the  
RADIO button again.  
4 Adjust your antenna so that the two specifications signal  
strength and signal quality display a preferably high  
value.  
16 OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Here you can choose between video (FBAS) and  
S-Video (Y/C).  
Settings  
1 Press the MENU button to open the main menu. The  
Automatic AFD  
menu item settings is highlighted by default.  
The broadcasted picture format may deviate from the pic-  
ture format to be displayed. AFD recognizes and corrects  
the presentation if you select the option ON.  
2 Press OK.  
You'll receive the following screen:  
Te le t ex t  
By means of this function you can choose whether your  
receiver or your TV set is to display the teletext.  
Default settings  
By means of this function you reset the configuration for  
the picture settings to previous set default values. These  
settings in most cases allow for an acceptable image & lan-  
guage reproduction.  
3 By using the arrow button or , highlight the  
desired option and press the OK button in order to call  
it up.  
Language  
Menu language  
Note: In either case, observe the information texts displayed  
on the screen. They will help you to select the correct settings.  
Here you set the language of the OSD (on-screen display).  
Audio language  
Selecting and altering the settings is effected as usual by  
means of the arrow buttons / / / ; a window  
that is inserted can be closed by pressing the EXIT but-  
ton.  
Select a reproduction language for the programmes.  
Second audio language  
Select an optional reproduction language for the pro-  
grammes.  
Picture settings  
Screen format  
Note: If the desired programme is not broadcasted in the lan-  
guage set under "audio language“, the "second audio lan-  
guage“ is used.  
4:3 (Letterbox 16:9)  
Reduces films in 16:9 mode for  
4:3 format TVs to scale, and for  
this purpose inserts a black bar  
above and below on the screen.  
Caption language  
Select a language for the captions.  
Second caption language  
4:3 (Pan Scan / CCO)  
Presents films in the 16:9 for-  
mat in a screen-filling manner.  
With regard to 4:3 TVs, the left  
and right picture border is cut  
off.  
Select an optional caption language for the captions, see  
also "second audio language".  
Automatic captions  
Set this option to on if you want to automatically show  
broadcasted captions in the selected caption language  
(default: off).  
16:9 format  
Presents films on a 16:9 TV in  
full size.  
Menu settings  
Display duration of information banner  
Video output TV  
Here you define for how long the information banner, see  
page 11, is to be shown with regard to a change of chan-  
nel. If you want to completely eliminate the information  
banner in case of a change of channel, select not any.  
For the "video output TV“, the formats RGB, video  
(FBAS) and S-Video (Y/C) are provided. Here RGB  
presents the correct selection in most cases.  
Video output VCR  
Note: This item can only be selected, if you have not selected  
RGB with regard to "video output TV".  
OPERATION 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic information banner  
Security  
At the start of a new programme, the information banner  
is automatically shown as a default. If you do not want this,  
select off.  
1 Press the MENU button.  
2 Highlight the item safety by using the arrow button ꢂ  
or , and press the OK button.  
Note: This option is only available if the value set under "dis-  
play duration information banner“ is at least 4 seconds.  
3 Enter the PIN code and acknowledge by OK.  
Menu language  
Set the language of the OSD.  
Note: This function is also available via "language“, see  
page 17.  
Transparency  
Here you set the transparency of the OSD. If you have dif-  
ficulties to read the OSD with transparent setting, select  
not any.  
Note: The PIN code is set to 0000 by the factory. Also observe  
the displayed information. It will help you to select the correct  
settings.  
General  
Observe:  
Setting a time zone  
- Selecting and altering the settings is carried out as usual  
by means of the arrow buttons.  
Select whether the local time offset with regard to Green-  
wich mean time is to be set automatically, or if you want  
to specify it yourself.  
- A displayed window can be closed by pressing the  
EXIT button.  
Time zone  
PIN lock  
Select the entry GMT +01:00 for Germany and Central  
Europe (time difference with regard to the Greenwich  
mean time).  
Set this option to on if you want to protect your com-  
plete device against unauthorized access.  
When the receiver is switched on the next time, the PIN  
request is effected (the PIN code is set to 0000 by the fac-  
tory).  
Summer time  
Set the menu item summer time to off if it is not sum-  
mer time at the moment. You can also select the setting  
automatic. In case of this setting, the receiver obtains  
the information regarding summer time from the currently  
selected channel.  
Menu lock  
Set this option to on if you want to protect your menu  
against unauthorized access.  
Audio output format  
When the menu is called up the next time, the PIN  
request is effected (the PIN code is set to 0000 by the fac-  
tory).  
For the audio output, the formats mono and stereo are  
provided to you.  
Protection of minors  
Calling up default settings  
Here you can define a minimum age for specific pro-  
grammes. These programmes are PIN protected and are  
only unlocked by a PIN request.  
This function has already been described elsewhere, see  
page 16.  
Changing device PIN  
Here you can specify your personal PIN code.  
1 Press the OK button.  
2 For this purpose, enter the current PIN code and  
acknowledge by pressing the OK button.  
3 Following, enter your new PIN code and press the OK  
button.  
4 For acknowledging your new PIN code, enter it again and  
press the OK button.  
18 OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you experience an operating problem with your Digital Set Top Box, please refer to the trouble-shooting table below and  
then the notes that follow.  
Symptom  
Possible cause  
Remedy  
No picture and no sound  
No channel list or wrong channel list  
Short circuit in aerial lead  
Do an automatic station scan  
Turn off receiver, remove short  
circuit and then turn on again  
Defective or missing cable connection  
Poorly adjusted aerial  
Check all cables  
Adjust aerial  
Loose connectors or cable too long  
Check connectors and shorten  
cable  
No picture or picture is blocky in  
appearance  
Aerial too small  
Use a bigger aerial  
Check SCART connector  
Check aerial  
SCART connector not fully plugged in  
Aerial poorly adjusted or defective  
Sound but no picture  
Program is being broadcast with  
altered parameters  
Do an automatic search (see  
Advanced Installation)  
SCART connector not fully plugged in  
Program is no longer broadcast  
Check SCART connector  
None  
Cannot receive station that you  
could receive before  
Interference with „DECT“ phones or  
wireless equipment  
Move phone/wireless equipment  
away from the receiver to a loca-  
tion where interference ceases  
Program is being broadcast with  
altered parameters  
Do an automatic search (see  
Advanced Installation)  
Remote control is not working  
Obstacle in between remote control  
and receiver  
Remove obstacle  
Transport stream defect  
Unplug receiver and then plug in  
again  
Flat battery  
Replace battery  
Certain stations cannot be  
received from time to time  
These services are not transmitted 24 hours a day and can sometimes be una-  
vailable. This is not a fault.  
STB cannot be controlled  
Obstacle in between remote control  
and receiver  
Remove obstacle  
Poor image quality or no colours  
Wrong TV SCART out signal  
Try changing from RGB to CVBS  
or vice versa (see Configuration)  
Inappropriate video type selected  
Set video output according to TV  
set video requirements (see Con-  
figuration)  
You have forgotten or lost your  
PIN code  
Reset from the Parental Control  
Screen. To access the Parental  
Control Screen, use the following  
4-digit code: 8111. Keep this code  
secret to prevent others from  
using it.  
Refer to section “Protection of  
minors” on page 18 for more  
detailed information.  
If none of the above suggestions seem to work, try switching your Set Top Box off and then on again. If this does not work,  
contact either your supplier or a qualified repair technician. Never attempt to repair your set top box yourself.  
TROUBLESHOOTING 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Data  
General  
Power Supply  
- DVB terrestrial Free-To-Air receiver  
compliant to EN 300 744  
- Power supply 230VAC/50Hz to 12VDC  
- Operation power consumption less 7 W  
- Maximum stand-by mode consumption: 5 W  
- VHF and UHF frequency range support  
- Video and Audio out via 2x SCART  
- Digital audio out  
Dimensions of the device: approx. 250 x 140 x 32 mm  
Accessories  
- Fast channel search  
- Power Supply  
- Reed-Solomon decoding support (EN 300 744)  
- Automatic FEC selection (1/2, 2/3, 3/4, 5/6, 7/8)  
- MPEG2 Transport Stream support: ISO/IEC 13818-1  
- DVB-Video/-Audio support: ISO/IEC 13818-2, -3  
- Software update via antenna (update over air)  
- SCART/SCART cable  
- Remote Control  
- 2 Batteries (for remote control)  
- User manual  
Te m pe r at ure  
Base specification  
- Temperature-Range +5 °C…+40°C  
- QPSK / QAM16/64 demodulation compliant to DVB  
terrestrial standard EN 300 744  
This product complies with the requirements  
of the 95/47/EC and 2002/21/EC directives.  
- COFDM 2k and 8k  
- VHF and UHF support (174 … 862 MHz)  
- 7/8 MHz channel bandwidth  
The product complies with the following European council  
Directives: 73/23/EEC, 93/68/EEC and 89/336/EEC.  
- Guard Interval Modes: 1/32, 1/16, 1/8, 1/4 active symbol  
duration  
- Fast PLL tuning speed:  
step size 62,5 kHz / 166,67 kHz  
Input /Output  
2x SCART (VCR & TV) out  
- TV SCART video out: RGB, CVBS, Y/C  
- VCR SCART video out: CVBS, Y/C  
- switching signal: 0 / 6 / 12V  
- Audio out (left/right)  
Digital audio out (S/PDIF)  
RF input  
connector IEC60169-2 female  
- termination 75 Ohm  
- Return Loss: min. 6 dB (75 Ohm)  
Loop-Through of RF signals  
- output termination 75 Ohm  
20 TECHNICAL DATA  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peerless Industries Flat Panel Television SF 16D User Manual
Petsafe Pet Fence PIG00 10773 User Manual
Philips Clock Radio AE2480 User Manual
Philips Headphones SBCHE590 User Manual
Philips Iron GC3360 User Manual
Philips Portable CD Player AX5002 User Manual
Philips Portable Multimedia Player NP2500 37B User Manual
Pioneer Portable DVD Player PR 8210 A User Manual
Poulan Trimmer 545137276 User Manual
Pride Mobility Mobility Aid JZ SEL 7 SS User Manual