USER MANUAL
Color Television
13MT1532
13MT1533
Thank you for choosing Magnavox.
Need help fast?
Read your User Manual first for quick tips that make using
your Magnavox product more enjoyable. If you have read
your instructions and still need assistance you may access our
online help at
or
call 1-800-705-2000
while with your product.
IB8468E001
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and third grounding
prong. The wide blade or third prong are provided for your safety.
When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of
its cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus-
pectingly fall from the top of the set and cause product damage
and/or personal injury.
8.
9.
18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the manufac-
turer.
19. Power Lines - An outdoor antenna should be located away
from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built up
static charges.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safe-
ty standards for tilt and stability properties of its cabinet design.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these mate-
rials may be regulated due to environmental considerations. For dis-
posal or recycling information, please contact your local authorities or
22. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
Example of Antenna Grounding
A.
B.
The power supply cord or the plug has been damaged; or
Objects have fallen, or liquid has been spilled into the appli-
ance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
The appliance has been dropped, or the enclosure damaged.
as per NEC - National Electric Code
C.
D.
GROUND CLAMP
ANTENNA LEAD IN WIRE
E.
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL INDEX
Subject
Panel No. Subject
Panel No.
Alternate Channel . . . . . . . . . . . . . . . . .26 Remote Batteries . . . . . . . . . . . . . . . . . .4
Antenna Basic Connection . . . . . . . . . . .1 Remote Control Button Descriptions .5-6
Front Audio/Video Input Jacks . . . . . . . . .4 Sleeptimer . . . . . . . . . . . . . . . . . . . . . . .23
Automatically Program TV . . . . . . . . . . .9 SmartLock™ Controls
Basic Remote Operation . . . . . . . . . . . . .4
Basic Television Operation . . . . . . . . . . .4
Cable/Cable Box Basic Connection . . .1-2
Cable TV Control (Tuner Mode) . . . . . .8
Care and Cleaning . . . . . . . . . . . . . . . . .28
Channel Edit . . . . . . . . . . . . . . . . . . . . .10
Access Code . . . . . . . . . . . . . . . . . . . .18
Movie Ratings . . . . . . . . . . . . . . . . . . .20
Other Blocking Options . . . . . . . . . . .21
SmartLock Review . . . . . . . . . . . . . . . .22
TV Ratings . . . . . . . . . . . . . . . . . . . . . .21
Understanding SmartLock™ . . . . . . . .17
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . .12 SmartPicture™ Control . . . . . . . . . . . .24
Closed Caption Control . . . . . . . . . . . .23 SmartSound™ Control . . . . . . . . . . . . .24
Glossary . . . . . . . . . . . . . . . . . . . . . . . .29 SmartSurf . . . . . . . . . . . . . . . . . . . . . . .25
Language Control . . . . . . . . . . . . . . . . . .7 Start-Up Channel . . . . . . . . . . . . . . . . . .14
Limited Warranty . . . . . . . . . . . . . . . . .32 Start-Up Time . . . . . . . . . . . . . . . . . . . .15
On-Timer . . . . . . . . . . . . . . . . . . . . . . .13 Troubleshooting . . . . . . . . . . . . . . . . . .27
Picture Menu Controls . . . . . . . . . . . . .11 Volume Bar . . . . . . . . . . . . . . . . . . . . . .16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Antenna Connection
1
combination antenna receives normal
Abroadcast channels (VHF 2-13 and
UHF 14-69). Your connection is easy
since there is only one 75Ω (ohm)
antenna plug on the back of your TV -
and that’s where the antenna goes.
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
If your antenna has a round
75Ω
cable (75 ohm) on the end, then
1
you're ready to connect it to the
Rear of TV
TV. Go to step 2.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter (not supplied with
TV).
Twin Lead
Wire
Push the round end of the
75Ω
adapter or antenna cable onto
2
the 75Ω jack on the rear of the
Round Cable 75Ω
TV. If the round end of the
antenna cable is threaded, screw
it down tight.
Basic CableTV Connection
f Cable TV signal into your home is a
Isingle cable (75 ohm) the connection
to the TV is easy.
Connect the Cable TV cable
directly to the 75Ω jack on the
1
TV.
75Ω
Rear of TV
Helpful Hints
Cable TV Signal
If no Video Signal is present, the TV
will display a “BLUE” screen and shut
itself off in about 5 minutes. If the TV
is tuned to the AV channel and there
is no Video Signal present, the screen
will remain black and the TV will shut
itself off in about 5 minutes.
RF Coaxial
Cable 75Ω
75Ω
Use Auto Program as described on
panel 9 to set up channels that are
available in your area. Use the CH +/–
buttons to scan available channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Box Connections
2
f you cable signal uses a cable box or
Idecoder, follow the easy steps below to
complete the connection.
Cable Signal IN
from the Cable
Company
Cable Box (w/RF In/Outputs):
This connection will be mono.
Connect the Cable Company
2 1
VIDEO
IN OUT
AUDIO IN
SPDIF
R
L
S-VIDEO
CABLE
IN
IR
DVD-D OUT
supplied cable to the signal
IN(put) plug on the back of the
TO
TV/VCR
1
Y
Pb
Pr
AUDIO OUT
OPTICAL
SPDIF
USB
TV
PASSCARD
Cable Box.
Jack Panel Back of Cable Box
Using a separate round coaxial
cable, connect one end to the
2
3
OUT(put) (TO TV) plug on
the back of the Cable Box.
3
Connect the other end of the
round coaxial cable to the 75Ω
75Ω
75Ω
input on the back of the television.
Round 75Ω
Coaxial Cable
Screw it down finger tight.
Jack Panel Back of TV
NOTE: If applicable, set the OUTPUT
CHANNEL SWITCH on the back of the
cable box to CH 3 or 4. Tune the TV to
the same channel and change channels
at the cable box. In some cases, the
cable box will automatically tune to
either channel 3 or 4, change channels
until the picture appears.
Helpful Hints
If no Video Signal is present, the TV
will display a “BLUE” screen and shut
itself off in about 5 minutes. If the TV
is tuned to the AV channel and there
is no Video Signal present, the screen
will remain black and the TV will shut
itself off in about 5 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front AV (Audio/Video) Input Connections
3
udio and Video Front Inputs are avail-
Aable for a quick connection of a VCR,
to playback video from a camera, or
attach a gaming device. Use the AV but-
ton on the remote control to tune these
inputs.
Connect the video (yellow)
MENU
VIDEO
AUDIO
—
VOLUME
+
HANNEL
POWER
cable from the Video output on
1
the Camera (or accessory device)
to the Video (yellow) Input locat-
ed on the FRONT of the TV.
Front Jack panel of TV
MENU
VIDEO
AUDIO
—
VOLUME
+
CHANNEL
POER
For Mono Devices: Connect
3
2
1
one end of the audio cable from
2
Yellow
Video
cable
the Audio Out jack on the device
to the Audio In (white) jack on
the FRONT of the television.
White
Audio cable
OUT
AUDIO
IN
OUT
VIDEO
IN
ANTENNA
IN
ANTENNA
OUT
Turn the TV and the accessory
device ON.
3
3
5
Press the CH+ or CH- but-
ton on the remote control to
tune the TV to the front input
jacks. “Front” will appear on the
TV screen.
4
VCR, Camcorder, DVD
Player, etc. with
Audio andVideo
Out jacks
Press the PLAY ᮣ button on
the accessory device to view
playback, or to access the acces-
sory device (camera, gaming unit,
etc.).
5
4
EXIT
NOTE: For model 13MT1533
Audio sound is only available via the
headphone connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicTV and Remote Control Illustrations
Television
4
Press POWER to turn on the
Connect
headphones
(not sup-
plied) to the
; jack.
TV.
1
2
Press VOLUME + to increase
the sound level. Press VOLUME
– to lower the sound level.
MENU
VIDEO
AUDIO
—
VOLUME
+
CHANNEL
POWER
Press both buttons at the
same time to display the TV’s
on-screen menu. Once in the
menu, use these buttons to make
menu adjustments or selections.
Press CHANNEL ;8 or 9 to
select TV channels.
MENU
VIDEO
AUDIO
—
VOLUME
+
CHANNEL
POWER
Non-Stereo
models (white
AUDIO IN jack)
3
4
Connect an acces-
sory device to the
AUDIO/VIDEO IN
jacks.
Remote
Sensors
(point
remote
here)
Remote Control
Point the remote control toward
the remote sensor on the front of
the TV when operating the TV.
NOTE: For model 13MT1533
Audio sound is only available via
the headphone connection.
Remote sensor on
remote control
Battery Installation
To load the supplied batteries into
the remote:
R
E
W
O
P
3
5
+
H
C
2
6
8
1
–
H
C
C
Remove the battery compart-
9
0
4
+
L
O
V
C
7
–
L
O
V
H
ment lid on the back of the
/C
A
1
2
S
U
T
A
U
T
N
E
E
T
S
M
U
M
IT
X
E
remote.
P
E
E
L
ART
S
SM
D
N
U
O
S
F
R
U
E
R
S
U
T
IC
P
K
C
Place the batteries (two AA)
in the remote. Be sure the (+)
and (-) ends of the batteries line up
correctly (as marked inside the
remote).
O
L
C
Battery Installation
Reattach the battery lid.
3
Helpful Hints
The current channel number will
appear briefly when you first turn on
the TV or when you change channels.
Press STATUS/EXIT to see the cur-
rent channel number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Button Descriptions
5
NUMBER Buttons
Press the Number buttons to select TV
channels or to enter values in the menu.
For single-digit channels, press the
Number button for the channel you
want. The TV will pause briefly before
going to the chosen channel.
A/CH Button
(Alternate Channel)
Press to switch between the last channel
and the present channel.
Details are on panel 26.
STATUS/EXIT Button
Press to see the current channel number.
Press to remove a menu.
CC Button
Press to activate Closed Captioning.
Details are on panel 23.
SLEEP Button
Press to set the TV to turn itself off with-
in a certain time. Details are on panel 23.
CLOCK Button
Press to access the Clock menu, where
you can set the clock or the On-Timer.
Details are on panel 12.
SURF Button
Press to select up to five previously
viewed channels. Details are on panel 25.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Button Descriptions
6
POWER button
Press to turn the TV on or off.
CH(annel) +/– Buttons
Press to scan memorized channels.
VOL(ume) +/– Buttons
Press to increase or decrease the
sound.
MENU Button
Press to see the menu. Press
repeatedly to return to previous
menus or remove the menus.
Arrow 8 9 : ; Buttons
Press to select or adjust items in
the menu.
MUTE Button
Press to eliminate or restore the
TV sound. MUTE will appear on
the TV when the sound is muted.
SMART SOUND Button
Press to choose a sound setting.
Details are on panel 24.
SMART PICTURE Button
Press to choose a picture setting.
Details are on panel 24.
NOTE: For model 13MT1533
Audio sound is only available via the
headphone connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Language
7
ith the LANGUAGE control, you
Wcan set the TV’s on-screen menu
to be shown in either English or Spanish.
Press MENU to see the menu.
1
Press 8 or 9 to scroll through
the menu until SETUP is high-
lighted.
2
OR
Press : to enter the SETUP
menu.
3
Press 8 or 9 to scroll through
the SETUP menu until LAN-
GUAGE is highlighted.
4
EXIT
6
Press : repeatedly to select
ENGLISH or ESPANOL
(Spanish).
Press STATUS/EXIT to
remove the on-screen menu.
5
6
Helpful Hints
The Language control only
makes the TV’s on-screen
menus appear in English or
Spanish. It does not change the
other on-screen text features,
such as Closed Captions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV Control
8
t’s important for the TV to know what
Itype of signal - Cable TV or a normal
Antenna - you are using. To tell the TV
whether you are using a Cable TV signal,
set CABLE to YES or NO as follows.
Press MENU to see the menu.
1
Press 8 or 9 to scroll through
the menu until SETUP is high-
lighted.
2
Press : to enter the SETUP
menu.
VOL+
3
Press 8 or 9 to scroll through
the SETUP menu until CABLE
is highlighted.
6
EXIT
4
Press : to turn CABLE YES
or NO.
Press STATUS/EXIT to
remove the on-screen menu.
5
6
Helpful Hints
When CABLE is YES,
channels 1-125 are avail-
able.
When CABLE is NO, only
channels 2-69 are available.
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Program (Setting TV Channels)
9
our TV can set itself for local area (or
YCable TV) channels. This makes it
easy for you to select only the TV stations
in your area when you press CH +/-.
Connect an Antenna or Cable TV signal
before starting AUTO PROGRAM. Details
are on panels 1-2.
Press MENU to see the menu.
1
Press 8 or 9 to scroll through
the menu until SETUP is high-
7
8
9
2
lighted.
VOL+
Press : to enter the SETUP
EXIT
6
menu.
3
Press 8 or 9 to scroll through
the SETUP menu until AUTO
PROGRAM is highlighted.
4
Press : to start scanning and
memorizing channels.
5
When Auto Programming is
complete, CHANNELS ARE SET
will appear on the screen. Then
the SETUP menu will reappear
briefly.
Press STATUS/EXIT to
remove the on-screen menu.
6
Helpful Hints
Press the CH +/- buttons to see
which channels are in the TV’s
memory.
To delete unwanted channels from
the TV’s memory, see CHANNEL
EDIT on panel 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Edit
10
hannel Edit makes it easy for you to
Csave or delete channels in the list of
channels in the TV’s memory.
Using the Number buttons,
select the channel you wish to
save or delete.
1
Press MENU to see the menu.
2
Press 8 or 9 to scroll through
the menu until SETUP is high-
3
lighted.
Press : to enter the SETUP
menu.
4
VOL+
Press 8 or 9 to scroll through
7
the SETUP menu until CHAN-
EXIT
5
NEL EDIT is highlighted.
Press : to choose SAVED or
DELETED.
Choose SAVED to add the chan-
nel to the TV’s memory. It will be
available using the CH +/– but-
tons.
6
Choose DELETED to remove
the present channel from the TV
memory.
Press STATUS/EXIT to
remove the on-screen menu.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu Controls
11
o adjust your TV picture, select a
Tchannel and follow the steps below.
Press MENU to see the menu.
1
With PICTURE highlighted,
press : to enter the PICTURE
2
3
menu.
Press 8 or 9 to highlight
BRIGHTNESS, COLOR,
PICTURE, SHARPNESS,
TINT, or CONTRAST
PLUS.
Press : or ; to adjust the
control.
CONTRAST PLUS can only be
turned ON or OFF.
Press STATUS/EXIT to
remove the on-screen menu.
4
5
Helpful Hints
BRIGHTNESS Press - or ;
until the darkest parts of the picture
are as bright as you prefer.
COLOR Press - or ; to add or
eliminate color.
PICTURE Press - or ; until the
lightest parts of the picture show
good detail.
SHARPNESS Press - or ; to
improve picture detail.
TINT Press - or ; to obtain
natural skin tones.
CONTRAST PLUS Press - or
; to choose ON or OFF. Setting
CONTRAST PLUS to ON sharpens
the picture quality. The black por-
tions of the picture become darker
and the whites become brighter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock
12
our TV has an on-screen clock.
YDuring normal operation, the clock
appears when you press STATUS/EXIT
or change channels.
Press CLOCK to see the
Clock menu. SET CLOCK will
1
2
be highlighted.
Enter the current time
using the Number buttons.
If the first number is a single
digit, first enter a zero, then
the digit (i.e., press “0,” then
press “8”).
OR
3
7
8
Press : or ; to set either
AM or PM.
3
Press STATUS/EXIT to
remove the on-screen menu.
4
4
Helpful Hints
If the power fails, you must
reset the clock.
If the time is not set, it will not
appear on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Timer
13
ust like an alarm clock, you can set the
JTV to turn itself on at the same time
everyday.
Press CLOCK to display the
Clock menu.
1
Press
9
until TIMER ACTIVE
is highlighted.
2
3
Press : or ; to select ON (if
activating the Timer) or OFF (if
deactivating the Timer).
Press STATUS/EXIT to
remove the on-screen menu.
4
4
SLEEP
Helpful Hints
Remember, set the clock to
the current time as described
on panel 12. Then, set the time
you want the TV to turn on
using START TIME as
described on panel 15.
Download from Www.Somanuals.com. All Manuals Search And Download.
Start-Up Channel
14
sed with the Timer feature, you can
Uselect a specific channel that the TV
will tune to when the TV turns itself on.
Timer details are on panel 12.
Press CLOCK to see the Clock
menu.
1
Press 9 until CHANNEL is
highlighted.
2
Press the Number buttons
to enter the channel you would
3
like the TV to start on. Or, use
CH +/– to select a channel.
Press STATUS/EXIT to
remove the on-screen menu.
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Start-Up Time
15
sed with the Timer feature, you can
Uselect a specific time at which the TV
will turn itself on when TIMER ACTIVE is
ON.
Press CLOCK to display the
Clock menu.
1
Press
9
until START TIME is
highlighted.
2
3
Enter the time to turn on
the TV using the Number
buttons. If the first number is a
single digit, first enter a zero,
then the digit (i.e., press “0,” then 5
press “8”).
Press : or ; to set AM or
PM.
4
5
Press STATUS/EXIT to
remove the on-screen menu.
Helpful Hint
Remember to set TIMER ACTIVE
to ON. Details are on panel 13.
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Bar
16
se the Volume Bar to see the
UTV’s volume on the screen. The
Volume Bar will appear when you
press the VOL +/- buttons.
Press VOL + on the remote
to display the on-screen Volume
Bar. Pressing the VOL + button
will increase the TV sound.
1
Press VOL – on the remote
to display the on-screen Volume
Bar. Pressing the VOL – button
will decrease the TV sound.
2
NOTE: For model 13MT1533
Audio sound is only available via the
headphone connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the SmartLock Control
17
he SmartLock™ feature is an integrated cir- MOVIE RATINGS Continued
Tcuit that receives and processes data sent by
R: Restricted - This is programming is specifi-
broadcasters, or other program providers, that
contain program content advisories. When pro-
grammed by the viewer, a TV with SmartLock™
can respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence, sexual
situations, etc.). This is a great feature to censor
the type of viewing children may watch.
cally designed for adults. Anyone under the
age of 17 should only view this programming
with an accompanying parent or adult guardian.
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only.
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intensely
suggestive language.
SmartLock™ offers various BLOCK-
ING controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
TV RATINGS
TV-Y -- Designed for a very young audience,
including children ages 2-6.
Channel Block - After an access code has
been programmed, you can block individual
channels including the A/V inputs.
TV-Y7 -- It may be appropriate for children
age 7 and above who have acquired the devel-
opment skills needed to distinguish between
make-believe and reality.
TV-G -- Suitable for most audiences, this
type of programming contains little or no vio-
lence, no strong language, and little or no sex-
ual dialogue or situations.
TV-PG -- This program contains material
that parents may find unsuitable for younger
children. Could contain Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue (D).
Clear All - Allows you clear all channels
being blocked from your viewing set with
the Channel Block Control.
Block All - Allows you to block ALL chan-
nels and A/V inputs at one time.
Movie Ratings - Certain blocking options
exist which will block programming based
on ratings patterned by the Motion Pictures
Association of America.
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
TV-14 -- This program contains some materi-
al that many parents would find unsuitable for
children under 14 years of age. This type of
programming contains one or more of the fol-
lowing: intense violence (V), intense sexual sit-
uations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
MOVIE RATINGS
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages.
PG: Parental Guidance Suggested -
This programming contains material that par-
ents may find unsuitable for younger children.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13.
TV-MA -- This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17. This
type of programming contains one or more of
the following: graphic violence (V), explicit sex-
ual situations (S), or crude indecent language
(L).
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock Access Code
18
ver the next few pages you’ll learn
Ohow to block programs and under-
stand the rating terms for certain broad-
casts. First, set a personal access code.
Press MENU to see the menu.
1
Press 8 or 9 until SMART-
LOCK is highlighted.
2
Press : again. The on-screen
display will read “ACCESS
3
CODE ----.”
Use the Number buttons to
enter 0711. “XXXX” appears
4
on the screen as you press the
Number buttons.
When 0711 is entered correctly,
proceed to step 6.
If you enter a wrong digit,
“INCORRECT CODE” will
appear on the screen. You will be
asked to “PLEASE ENTER
AGAIN.” Enter 0711 again.
Press 9 until CHANGE CODE
is highlighted.
5
Press : to change your personal
Access Code.
Enter a new four-digit code
6
using the Number buttons.
7
The screen will ask you to confirm
the code you just entered. Enter
the same new code again.
“XXXX” will appear when you
enter your new code.
After confirming the new
code, the on-screen menu will
return to the BLOCK option.
Continue through the next few
pages to learn how to block pro-
gram ratings.
Or, press STATUS/EXIT to
remove the menu.
NOTE: If you ever forget your code,
the 0,7,1,1 code is the factory default
and can be used to enter and create a
new one.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock Blocking Options
19
fter you set your personal access
Acode, SmartLock provides special
blocking options. Use these blocking
options to turn censoring on or off.After
entering your code:
The menu will appear with
BLOCK highlighted. Press : to
1
2
display the blocking options.
Press 9 to highlight MASTER
DISABLE, BLOCK UNRAT-
ED, or BLOCK NO RATING.
9
MASTER DISABLE: This is the
"master switch" for SmartLock. When
ON, all blocking/censoring is disabled.
When OFF, specifically blocked set-
tings are enabled.
VOL–
EXIT
BLOCK UNRATED: All unrated
programs (based on Movie Ratings or
TV Ratings) will be blocked if this fea-
ture is ON and MASTER DISABLE is
OFF.
BLOCK NO RATING: All pro-
gramming with NO content advisory
can be blocked if this feature is ON
and MASTER DISABLE is OFF.
Press : to select ON (block) or
OFF (do not block).
Press STATUS/EXIT to
remove the on-screen menu.
3
If BLOCK UNRATED or BLOCK NO RATING is
ON, all unrated programs and programs containing
no content advisory will display this message. To
watch the channel, enter your access code. Or, set
BLOCK UNRATED and BLOCK NO RATING to
OFF.
4
Helpful Hint
Blocking any rating (ON) will block all
the higher ratings automatically. For
example, if R is blocked manually, NC
17 and X will be blocked automatically.
To turn a rating OFF, set each rating
individually.
To restore the default access code
(0711), unplug the TV’s power cord for
10 seconds. When you restore the
power, the access code will be 0711
again.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock- Movie Ratings
20
here are two types of ratings for
TSmartLock. One is based on movie
industry ratings. The other is based on TV
industry ratings. Both can be used to cen-
sor programming.
Let’s first look at Movie Ratings. After you
have entered your personal access code,
follow the steps below:
With BLOCK highlighted, press
:.
1
With MOVIE RATINGS high-
lighted, press : to see the
9
2
Movie Rating options: (G, PG,
PG-13, R, NC 17, or X).
When highlighted, these options
can be turned ON (which will
block viewing) or OFF (which
will allow viewing).
EXI
Press : or ; to turn the rating
ON or OFF.
Press STATUS/EXIT to
remove the on-screen menu.
3
4
NOTE: If you ever forget your code,
the 0,7,1,1 code is the factory default
and can be used to enter and create a
new one.
A message appears when programming is blocked by
Movie Ratings. To watch the programming, turn OFF
the Movie Rating or enter your access code. Entering
the code will unblock all Movie Ratings until you turn
off the TV. Then the blocked ratings will reset to ON.
Helpful Hints
Blocking any rating (ON) will
block all the higher ratings auto-
matically. For example, if R is
blocked manually, NC 17 and X
will be blocked automatically.
To turn a rating OFF, set each
rating individually.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock- TV Ratings
21
ome program ratings are based on TV
Sindustry ratings as described below.
After entering your personal access code,
follow the steps below.
With BLOCK highlighted, press
:.
1
Press 8 or 9 to highlight TV
RATINGS.
Press : to display the TV
Rating options (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-
MA).
When highlighted, TV-Y and TV-
G can be turned ON (which will
block viewing) or OFF (which
will allow viewing).
2
3
5
2
2
1
3
4
TV-Y7, TV-PG, TV-14, and TV-
MA can be customized to block
V (violence), FV (fantasy vio-
lence), S (sexual situations), L
(coarse language), or D (sugges-
tive dialog).
4
Press : or ; to turn each
sub-rating ON or OFF.
Press STATUS/EXIT to
remove the on-screen menu
5
NOTE: If you ever forget your code,
the 0,7,1,1 code is the factory default
and can be used to enter and create a
new one.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock Review
22
ow that you’ve learned how to block
Nviewing using the Movie Ratings or
TV Ratings, let’s review what you’ve
done. SmartLock Review allows you to
see what you have blocked. Whenever
SmartLock is accessed, a review screen
will show what ratings or blocking
options are on.
Press MENU to see the menu.
1
Press 8 or 9 to highlight
SMARTLOCK.
2
Press : to display the
SMARTLOCK REVIEW
3
EXIT
screen. This menu will display
blocked Movie Ratings or TV
Ratings, along with the status of
BLOCK UNRATED and BLOCK
NO RATING.
Press STATUS/EXIT to
remove the on-screen menu.
4
NOTE: If you ever forget your code,
the 0,7,1,1 code is the factory default
and can be used to enter and create a
new one.
Helpful Hint
If MASTER DISABLE is ON, the
SMARTLOCK REVIEW screen
will not appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleeptimer
23
our TV can be set to automatically
Yturn itself off in a given amount of
time.
0 MIN
Press SLEEP. The SLEEP display
will appear on the screen.
Press SLEEP repeatedly to
pick the amount of time (in 15
minute increments up to 90 min-
utes) before the TV will turn itself
off.
1
15 MIN
30 MIN
45 MIN
2
9
60 MIN
75 MIN
90 MIN
1
2
EXIT
NOTE: An on-screen count down will
appear during the last minute before
the TV shuts itself off.
Closed Caption Controls
losed Captioning (CC) lets you read
Cthe voice content of TV programs on
the TV screen. Designed to help the hear-
ing impaired, this feature uses on-screen
text boxes to show dialog and conversa-
tions during TV programming.
Press the CC Button on the
CC Off
remote to display the current
1
Closed Caption setting.
Press the CC Button repeat-
CC Off
edly to choose from the four
2
Closed Caption options (CC-
CC1
CC2
9
OFF, CC-1, CC-2, or CC-
MUTE). Dialog and descriptions
for the action on the TV program
will appear on the screen.
3
CC Mute
EXIT
1
2
When finished, press the
STATUS/EXT button to
3
remove the menu from the
screen.
NOTE: You can also get to the Closed
Captioning controls through the TV
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartPicture
24
hether you’re watching a movie or
Wa sporting event, your TV has
automatic video control settings matched
for your current program source or con-
tent.
Press SMART PICTURE on
POWER
1
4
2
5
8
0
3
6
the remote control. The current
1
CH
SmartPicture setting will appear
in the middle of the screen.
Press SMART PICTURE
repeatedly to select either PER-
CH
7
9
MOVIES - Preset picture options
for watching Video Tapes, or
DVDs.
SPORTS - Preset picture
options for watching sporting
events.
WEAK SIGNAL - Preset pic-
ture options for watching pro-
grams where the reception is not
at its best.
A/CH
CC
VOL
VOL
STATUS
EXIT
2
MENU
SONAL, MOVIES, SPORTS, or
WEAK SIGNAL.
1
2
SLEEP
CLOCK
MUTE
SURF
SMA
NOTE: The way you choose to set
the Picture Menu Controls will
become your PERSONAL setting.
PICTURE SOUND
SmartSound
n many cases, the volume levels of
Ibroadcast programming and commer-
cials are not the same. With SmartSound,
you can have the TV level the sound. This
provides a more consistent sound by
reducing the peaks and valleys that occur
during program changes or commercial
breaks.
Press SMART SOUND on the
remote control. The current
1
SmartSound setting will appear in
the middle of the screen (ON or
OFF).
Press SMART SOUND
repeatedly to toggle between
2
ON or OFF.
NOTE: For model 13MT1533
Audio sound is only available via the
headphone connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartSurf (Alternating Channels)
25
series of previously viewed channels
Acan be selected with the SURF button.
Switch between different TV programs
that currently interest you. SmartSurf lets
you set up to five channels in its quick
viewing list.
Press CH +/ – (or the Number
buttons) to select a channel to
1
add to the SURF list.
Press SURF while the channel
number appears.
2
Press
:
to add the channel to
the SURF list.
3
Repeat steps 1 through 3 to add
additional channels (up to five) to
the SURF list.
To remove a channel from the
SURF list, choose the channel
with the Number buttons and
press SURF while the channel
number appears. Then press :;
the channel will be deleted from
the SURF list.
Press STATUS/EXIT to
remove the on-screen menu.
4
Press SURF repeatedly during TV
viewing to scan through the
channels in the SURF list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Alternate Channel Button
26
our remote control has an Alternate
YChannel button that allows you to tog-
gle between the current and previous but-
ton. For instance, if you are watching two
games on TV, you can enter the channel
numbers once and flip between the two
channels with the touch of only one but-
ton.
After entering the two channels numbers,
so that one is the last viewed channel and
the other is the current channel, follow the
step below.
Press the A/CH button on the
remote control. The channels will
toggle between the current chan-
nel and the last viewed channel.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
27
No Power
Remote Does Not Work
•Check the TV power cord. Unplug the TV,
wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button
again.
•Check that the outlet is not on a wall
switch.
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
No Picture
•Check antenna connections. Are they
properly secured to the TV's ANT 75Ω
plug?
•Check the TUNER MODE control for the
correct tuner setting.
•Try running the Auto Program feature to
find all available channels.
•Check the batteries. If necessary, replace
them with 2 AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
•Clean the remote control and the remote
control sensor window on the TV.
•Check the TV power cord. Unplug the
TV, wait 10 seconds, then reinsert the
plug into the outlet and push the POWER
button again.
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
•Check to be sure the TV outlet is not on
a wall switch.
TV Displays Wrong Channel or No
Channels Above 13
•Repeat channel selection.
•Press the CH+ or CH- buttons on the
remote to make sure the correct signal
source is selected (FRONT or Current
Channel).
•Add the desired channel numbers (using
the CHANNEL EDIT control) into the
TV’s memory.
•Check to be sure the TUNER MODES are
set to the CABLE option and run the Auto
Program feature to find all available chan-
nels.
Your SmartLock Access Code Does
Not Work
•You can use the default code if you forget
your personal access code. Press 0. 7, 1, 1
to enter the SmartLock feature and set a
new personal access code. Details are on
page
Sound
No
•Check the VOLUME buttons.
•Check the MUTE button on the remote
control.
•If you’re attempting to hook up auxiliary
equipment, check the audio jack connec-
tions located on the front of the TV.
For model 13MT1433/17, coonect up the
headphone before you check the above.
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
28
WARNING Concerning Stationary
Images on the TV Screen:
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color
changes, and increased chance of set
failure, do not place the TV where
temperatures can become excessively
hot; for example, in direct sunlight or
near a heating appliance.
Do not leave stationary or letterbox
images on screen for extended peri-
ods of time. This can cause uneven
picture-tube aging.
Normal use of the TV should involve the
showing of pictures that contain constant-
ly moving and changing images that fill the
screen. Be careful not to leave nonmoving
images on screen for extended periods of
time, or to display the same images on
screen too frequently, because subtle
ghost images can be left on the picture
tubes. Sources of stationary images may
be DVD disks, laser disks, video games,
CD-i disks, videotapes, digital television
boxes, broadcast channels, cable channels,
satellite channels, and others. Here are
some examples of stationary images
(this is not an all-inclusive list; you
may encounter others in your view-
ing):
• Be sure to allow a free flow of air to
and from the perforated back cover of
the set.
CLEANING
• To avoid possible shock hazard, be sure
the TV is unplugged from the electrical
outlet before cleaning.
• Regularly dust the TV with a dry, non-
scratching duster to keep the TV clean.
• When cleaning the TV, take care not to
scratch or damage the screen surface.
Avoid wearing jewelry or using any-
thing abrasive. Do not use household
cleaners. Wipe the front screen with a
clean cloth dampened with water. Use
even, easy, vertical strokes when clean-
ing.
• DVD menus—listings of DVD disk
content
• Letterbox black bars—shown at the
top and bottom of the TV screen when
a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect
ratio.
• Gently wipe the cabinet surfaces with a
clean cloth or sponge dampened in a
solution of cool, clear water and a mild
soap or detergent. Use a clean, dry
cloth to dry the wiped surfaces.
• Video-game images and score-
• Occasionally vacuum the ventilation
holes or slots in the back cover of the
set.
• Never use thinners, insecticide sprays,
or other chemicals on or near the cabi-
net, as they might cause permanent
marring of the cabinet finish.
boards
• Television station logos—present a
problem if they are bright and station-
ary; moving or low-contrast graphics
are less likely to cause uneven aging of
the picture tube
• Stock-market tickers—presented at
the bottom of the TV screen
• Shopping channel logos and pric-
ing displays—bright and shown con-
stantly or repeatedly in the same loca-
tion on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
29
Audio/Video Inputs • Located on the
front of the TV, these connectors (RCA
phono type plug) are used for the input of
audio and video signals. Designed for use
with VCRs (or other accessories) in order
to receive higher picture resolution and
offer sound connection options.
Programming • Adding or deleting chan-
nel numbers into the Television’s memory.
The TV remembers only the locally avail-
able or desired channel numbers and skips
over any unwanted channel numbers.
Remote Sensor • An area on the front
of the TV that receives signals from the
remote control.
Closed Caption • Broadcast standard
which allows you to read the voice content
of television programs on the TV screen.
Designed to help the hearing impaired, this
feature uses on-screen text boxes to show
dialog and conversations while the TV pro-
gram is in progress.
Twin Lead Wire • The more commonly
used name for the two-strand, 300 Ohm
antenna wire used with many indoor and
outdoor antenna systems. In many cases,
this type of antenna wire requires an addi-
tional adapter (or balun) in order to con-
nect to the 75 Ohm IN jacks of more
recent Televisions and VCRs.
Coaxial Cable • A single solid antenna
wire normally matched with a metal (F-
type) connector that connects directly to a
75 Ohm IN jack on a TV or VCR.
Menu • An on-screen listing of features
that are available for adjustments.
On-screen Displays (OSD) • The word-
ing or messages generated by the television
to help the user with specific feature con-
trols (color adjustment, programming,
etc.).
Download from Www.Somanuals.com. All Manuals Search And Download.
MAGNAVOX LIMITED WARRANTY
30
Note: Warranty does not cover antenna or headphone
Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display
MAGNAVOX warrants this product against defect in
material or workmanship, subject to any conditions set
forth as follows:
•
A product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
products damaged by these modifications.
Damage occurring to product during shipping when
improperly packaged or cost of associated packag-
ing.
Product lost in shipment and no signature verifica-
tion of receipt can be provided.
A product used for commercial or institutional pur-
poses (including but not limited to rental purposes).
Products sold AS IS or RENEWED.
PROOF OF PURCHASE:
You must have proof of the date of purchase to receive
warranted repair on the product. A sales receipt or
other document showing the product and the date that
you purchased the product as well as the authorized
retailer included, is considered such proof.
•
•
•
•
COVERAGE:
(If this product is determined to be defective)
LABOR: For a period of ninety (90) days from the date
of purchase, Magnavox will repair or replace the prod-
uct, at its option, at no charge, or pay the labor charges
to any Magnavox authorized service center. After the
period of ninety (90) days, Magnavox will no longer be
responsible for charges incurred.
TO OBTAIN WARRANTY SERVICE IN THE
U.S.A., PUERTO RICO, OR U.S. VIRGIN
ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
TO OBTAIN WARRANTY SERVICE IN
CANADA…
PARTS: For a period of one (1) year, Magnavox will
supply, at no charge, new or rebuilt replacement parts
in exchange for defective parts. Magnavox authorized
service centers will provide removal and installation of
the parts under the specified labor warranty.
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR
THE CONSUMER. MAGNAVOX SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WAR-
RANTY.
DISPLAY: For a period of one (1) year from the date of
purchase, Magnavox will supply, at no charge, a new or
rebuilt active display device in exchange for the defec-
tive display. Magnavox authorized service centers will
provide removal and installation of the parts under the
specified labor warranty. (PTV screens carry a thirty
(30) day replacement warranty.)
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
•
Labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limita-
tions on how long an implied warranty lasts, so the
above limitations or exclusions may not apply to you. In
addition, if you enter into a service contract agreement
with the MAGNAVOX partnership within ninety (90)
days of the date of sale, the limitation on how long an
implied warranty lasts does not apply.
•
Product repair and/or part replacement because of
improper installation, connections to improper volt-
age supply, abuse, neglect, misuse, accident, unau-
thorized repair or other cause not within the con-
trol of Magnavox.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6583E001 / 01-04
Download from Www.Somanuals.com. All Manuals Search And Download.
|