Philips CRT Television 10 42PF9641D 10 User Manual

About this User Manual  
EN  
This manual contains all information you will need to initially install and operate your new TV.  
Also read the help texts which are being displayed at the bottom of the screen.  
If this instruction manual does not give an answer or if ‘Troubleshooting’ does not solve yourTV  
problem, you can call your Local Philips Customer or Service Centre. See the suppliedWorldwide  
guarantee booklet.  
Please, have the Model and Product number which you can find at the back or the bottom of your television  
set or on the packaging, ready, before calling the Philips customer support service.  
Model: 37-42-50PF9631D/10 42PF9641D/10  
Product No: ....................................  
Contents  
Connect:  
Annex 3 - Philips TV-Slideshow Format  
Annex 4 - Philips TV - Digital camera  
Annex 5 - Issues referring to connected  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
EN  
Before you start  
Warning: do not insert the mains cord into the mains at the bottom of the TV and in a wall socket  
or hang the TV on the wall before all connections are made.  
Before you switch on your TV, connect all your peripheral equipment. See To make video and audio  
connections, p. 44.  
Overview of the rear connector panel  
There is a wide range of audio and video equipment that can be connected to your TV. See To make  
audio and video connections, p. 44.  
Y
Pb  
Pr  
G
B
V
R
H
EXT3  
EXT1  
AUDIO L/R  
Y
Pb  
Pr  
G
B
V
R
H
AUDIO L/R  
EXT3  
EXT2  
EXT1  
EXT3  
EXT2  
EXT1  
o
o
o
o
o
DIGITAL  
COMMON INTERFACE  
HDMI  
1
HDMI  
2
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT  
o
R
O
U
T
A
U
D
I
O
EXT2  
COMMON INTERFACE  
HDMI  
ANTENNA  
o
o
o
o
o
DIGITAL  
COMMON INTERFACE  
HDMI 1  
HDMI 2  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o  
R
OUT AUDIO  
DIGITAL  
AUDIO  
IN  
AUDIO OUT  
EXT1 can handle CVBS, RGB and Audio L/R;  
EXT2 can handle CVBS, S-VIDEO, RGB,Audio L/R;  
EXT3 can handleYPbPr, RGB H/V and Audio L/R;  
HDMI 1 and 2.  
Supported video formats: 480i, 480p, 576i, 576p, 720p, 1080i.  
Warning: disconnect all power sources before making any connections.  
Tip: it is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a  
better picture quality.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting started (Continued)  
EN  
Overview of the side connector panel  
- To connect a camera, camcorder or game, see To make video  
and audio connections, p. 45.  
USB  
- To connect a headphone, see To make video and audio  
connections, p. 45.  
- To connect a USB device, see Multimedia browser, p. 38.  
Connect the antenna  
<
Insert the aerial plug firmly into the aerial socket x at the  
bottom of the TV.  
Tip: for best quality use the suppressor cable supplied.  
Connect the mains  
<
Insert the mains cord supplied into the mains at the bottom  
of the TV and in the wall socket.  
Warning: verify that the mains supply voltage corresponds  
to the voltage printed on the sticker at the rear of the TV.  
UK - EIRE  
Remote control  
<
Insert the 2 batteries supplied (Type R6-1,5V).  
Be sure the (+) and (-) ends of the batteries line up  
correctly (inside of case is marked.)  
For most keys pressing a key once will activate the function.  
Pressing a second time will de-activate it.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of the remote control RC4401/01  
EN  
B Standby  
Press to switch the TV from or to standby mode.  
When switched to standby, a red indicator on the TV lights up.  
Attention: the TV is never powered off completely unless  
it is physically unplugged.  
TV Press to select TV mode.  
DVD STB VCR AUX  
Press one of these keys to set your remote control to  
operate a peripheral device.  
See Audio andVideo equipment keys, p. 55.  
DEMO Press to switch the Demo menu on or off.  
a
Colour keys  
- When functions are attached to the colour keys, the  
colour keys are shown on screen.  
- To select a page in Teletext mode.  
OPTION  
- To open and close the Quick access menu which contains  
a few frequently used options, like Picture format.  
- When in teletext, press repeatedly to enlarge the teletext  
page display. See Teletext, p. 42.  
aTo open and close the Electronic Programme Guide.  
See EPG (Electronic Programme Guide), p. 36.  
Cursor keys  
Press the cursor keys up/down, left/right to navigate  
through the menus.  
OK - To activate a setting  
- Starts playing content in the Multimedia Browser  
application.  
v
BROWSE/MENU:  
To open and close the main menu. See How to navigate  
through the menus, p. 11.  
bTeletext On/Off  
Press to switch teletext on. See Teletext, p. 41.  
Only for UK: Digital text/Interactive services.  
Attention: not all channels transmit interactive television  
applications at all times.  
V Volume  
Press + or - to adjust the volume.  
¬ Mute key: interrupt the sound or restore it.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use of the remote control RC4401/01 (Continued)  
EN  
+P- Channel selection  
- to browse through the TV channels and sources stored  
and marked in the Favourite channels lists;  
- to select a page in Teletext mode;  
- to quickly browse through the lists in the menus;  
- to switch the TV on from standby mode.  
0/9 Digit keys  
To select a TV channel between 0 and 999.  
AV Select your peripherals  
See Installation menu, Select your connections, p. 33.  
0 Previous channel  
a
Press to alternate between the currently viewed and the  
previously viewed TV channel.  
Ambilight-MODE  
Ambilight: Press to switch Ambilight On or Off. For the  
Ambilight settings, see Use of the TV menu settings, Enjoy  
Ambilight, p. 20.  
MODE: Press this key repeatedly to toggle through the  
Ambilight modes.  
Note: when the TV is switched to standby, and you switch  
Ambilight On,Ambilight will be active. Only then less  
modes are available.  
Ò ‡ π † Audio andVideo equipment keys  
See Audio andVideo equipment keys, p. 55.  
See Multimedia browser functional keys, p. 40.  
CANCEL  
Only for UK: Digital text/Interactive services.  
Press this key to cancel those special services (and the  
function bar at the bottom of the screen).  
v
® no function  
iOn screen information  
Press to display (when available) information about the  
selected TV channel and programme.  
bDual screen  
Press the b key to show teletext on the right of the  
screen.  
FAV To display the channels list.  
You can create up to four favourite lists.  
Note: to set the remote control to work peripheral  
equipment, see Annex 1, p. 57.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of the OPTION key  
EN  
The OPTION key allows you to display the Quick access menu  
which will give you direct access to some features and menu  
options.  
1. Press the OPTION key.  
>
The Quick access menu appears.  
2. Press the cursor up/down to select a menu item.  
3. Press the OK key to jump to the selected menu item in the  
TV menu. (Except for the Clock option).  
4. Use the cursor keys to make a selection.  
5. Press the OPTION key to exit.  
Note: digital related menu items will only be accessible in case  
of digital TV broadcasting.  
a
Digital audio language:  
See Adjust sound menu settings, p. 18.  
Digital subtitle language:  
See Adjust feature menu settings, p. 23.  
Subtitles:  
See Adjust feature menu settings, p. 23.  
Picture format:  
Quick access  
Digital audio language  
Digital subtitle language  
Subtitles  
See Use of the TV menu settings,Adjust picture menu  
settings, p. 17.  
Equalizer:  
See Use of the TV menu settings,Adjust sound menu  
settings, p. 18.  
Picture format  
Equalizer  
Clock:  
Clock  
<
Select to activate/deactivate the clock display on the screen.  
Keys at the right side of the TV  
In case your remote is lost or broken, apart from  
channel selection and volume adjustment, you can still  
change some of the basic settings with the keys at the  
side of your TV.  
<
<
Press the power switch B to switch the TV on or off.  
The MENU key can be used to summon the TV menu  
without the remote control.  
Use:  
- the VOLUME - and + keys and the  
PROGRAM/CHANNEL - and + keys to select menu  
items;  
B
VOLUME  
MENU  
PROGRAM/CHANNEL  
- the MENU key to confirm your selection.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction: Digital TV  
EN  
Next to analogue broadcast reception, your TV has a built-in TV  
tuner which receives, decodes and displays digital terrestrial  
signals.  
Digital TV and radio channels are only available and reproduced:  
- when DigitalVideo Broadcasting Terrestrial (DVB-T) is  
applicable in your local area;  
- and if DVB-T signal is supported by your TV for the country  
supported countries.  
Switch the TV on  
<
Press the power switch B at the side of the TV.  
>
An indicator on the front of the TV lights up and the  
screen comes on.  
<
If the TV is in standby mode, press the -P+ keys or the B  
key on the remote control.  
Note: the first time (and only the first time) you switch  
on your TV, you see a Welcome screen followed by the  
installation procedure. See First time installation, p. 9.  
First time installation  
The installation procedure consists of a series of screens that  
will guide you through the installation of your TV.  
Follow the instructions on screen.  
Note: if the TV has already been installed before and/or you  
want to change the First time installation settings, proceed  
with Use of the TV menu settings, p. 13.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
First time installation (Continued)  
EN  
Step 1: select your on-screen language  
After the Welcome screen you are asked to select a language of  
the TV's on-screen menus.The text of the header and the info  
on screen continuously change language.Also the digital audio  
and subtitle language will be set to the selected menu language.  
1. Press the cursor up/down to highlight your language.  
2. Press the OK key on the remote control.  
3. Follow the instructions on screen to proceed.  
a
Step 2: complete the initial TV installation  
procedure  
1. Press the green colour key on your remote control when  
Television is highlighted.  
2. Select the country where you are now located.  
Notes:  
- if you select a wrong country, the channel numbering will  
not be according to the standard for your country.  
- in case the country selected is not DVB-T supported by  
your TV, digital related menu-items will not be  
accessible.  
Menu language  
English  
Español  
Français  
Hrvatski  
Italiano  
Magyar  
.............  
Please select your  
language.....  
3. Press the green colour key on your remote control to start  
the Automatic channel installation.  
PHILIPS  
using cursor up and  
down  
>
All available digital TV and radio channels and analogue  
TV channels are searched for and stored automatically.  
This will take a few minutes.When the search is  
complete, the menu will indicate the number of digital  
and analogue channels found.  
Next  
Notes:  
- reception of digital terrestrial TV channels is applicable  
dependent on the country selected;  
PHILIPS Installation  
- if you choose to install the channels at a later time, select  
the Automatic installation in the TV menu, Installation,  
Channels to scan available channels.  
This will help you to install the following  
sections:  
Television  
Settings assistant  
4. Press the red colour key again when the search is  
completed.  
Previous  
Next  
Skip  
Stop  
PHILIPS Television  
System searching: please wait..........  
Digital channels found  
16  
22  
Analogue channels found  
Stop  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
First time installation (Continued)  
EN  
Step 3: Settings assistant: select your TV settings  
By means of several split screens/full screens you are  
prompted to select your preferred picture, sound and  
ambilight settings, to finally arrive at a complete setting  
which satisfies you.  
PHILIPS Installation  
This will help you to complete the Settings  
assistant.  
Television  
1. Press the green colour key on your remote control to enter  
the Settings assistant menu.  
2. Select your Location with the cursor up/down.  
Settings assistant  
>
If you choose Shop it will skip the Settings assistant.  
The TV parameters for Picture, Sound and Ambilight will  
then be set to predefined fixed settings.  
Previous  
Next  
Skip  
Stop  
Press the green colour key again to proceed.  
PHILIPS Settings assistant  
>
If you choose Home it will display the Settings  
Please select your location before  
assistant.  
continuing:  
Home  
3. Use the cursor left/right to each time select your preferred  
screen.  
4. Press the green colour key to each time confirm your  
selection and to jump to the following screen.  
Shop  
>
The following items will be presented sequentially.  
In the header it is mentioned how many screens have  
been completed and how many screens there are in  
total.  
The Settings assistant will step sequentially through the  
following settings: Picture, Sound and Ambilight.  
5. Press the green colour key again to store all the settings  
and to return to the TV installation menu.  
Note: when you skip or stop the Settings Assistant, then  
the standard settings Philips selected for you will be  
chosen.  
6. Press the red colour key again to finish the First time  
installation procedure and to display the first stored TV  
channel.  
Note: any time you can change or reset your settings or  
adjust individual settings for Picture, Sound and Ambilight  
in the TV settings menu. See p. 13, Use of the TV menu  
settings.  
To control the settings of special TV functions, features and  
accessory equipment, see p. 23, Adjust feature menu  
settings.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to navigate through the menus  
EN  
Introduction  
A lot of guiding instructions, help texts and messages will be  
displayed on your TV when you use the menus or when you try  
to execute an action.  
Read the help texts which are being displayed on the specific  
item highlighted.  
The colour keys at the bottom of the screen refer to the  
different actions which may be executed.  
Press the corresponding colour key on the remote control to  
perform the required or desired action.  
Note: digital related menu items will only be accessible in case  
of digital TV broadcasting.  
a
1. Press the MENU/BROWSE key on the remote control.  
>
The main menu appears on the screen.  
- TV menu allows you to access the TV menu. See  
below.  
- TV channels allows you to access the TV channel list  
and to create up to four favourite lists with your  
preferred TV channels and digital radio stations. See  
Create your favourite channel list, p. 35.  
- Programme guide allows you to access detailed  
information about individual digital TV programmes.  
According to the type of Electronic Programme Guide,  
it also allows you to access the table of scheduled  
Digital TV programmes and easily select and tune to a  
desired programme.  
See EPG, Electronic Programme Guide, p. 36.  
- Multimedia allows you to access the Multimedia  
browser application. It lets you display your personal  
multimedia files. Multimedia is only present when a  
USB device is connected.  
Television  
Multimedia  
TV menu  
TV channels  
Programme guide  
See Multimedia browser, p. 38.  
2. Use the cursor up/down to highlight and select a menu  
item.  
3. Use the cursor right to enter the highlighted menu item.  
>
The right panel shows the content of the highlighted  
menu item.  
TV menu  
TV settings  
Settings assistant  
Reset to standard  
Picture  
TV settings  
Features  
Installation  
Exit  
Sound  
Ambilight  
Info  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to navigate through the menus (continued)  
EN  
4. Use the cursor up/down to select a menu item.  
TV menu  
TV settings  
- TV settings allows you to adjust your preferred picture,  
sound and ambilight settings  
- Features allows you to control the settings of special TV  
features  
- Installation allows you  
- to select your language preferences;  
- to search for and store your TV channels;  
- to set or adjust various special functions;  
- to select connected peripheral equipment;  
- to define one or more channel numbers as decoder  
channel numbers;  
Settings assistant  
TV settings  
Features  
Installation  
Exit  
Reset to standard  
Picture  
Sound  
Ambilight  
Info  
- to reset your picture, sound and ambilight settings to the  
factory standard settings;  
- to upgrade your TV software  
5. Press the cursor right to enter the highlighted menu item.  
>
The content of the right panel is moved to the left panel  
and the right panel now shows the content of the newly  
highlighted item in the left panel.  
Note: in some cases it is important that the picture can be  
watched while you adjust the settings.This means that when  
the highlight is on the right side panel, the other menu items  
hide away.When the cursor left is pressed, the hidden menu  
items reappear and the highlight moves to the left panel.  
6. Press the MENU/BROWSE key to exit the main menu.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of the TV menu settings  
EN  
The TV menu allows you to access and change settings and  
preferences in case you want to change the First time  
installation settings and/or you want to control the settings of  
Television  
Multimedia  
TV menu  
TV channels  
Programme guide  
special TV functions, features and peripheral equipment.  
Adjust viewing and listening settings  
TV menu  
TV settings  
Settings assistant  
Reset to standard  
Picture  
1. Press the MENU/BROWSE key on the remote control.  
TV settings  
Features  
Installation  
Exit  
>
The main menu appears on the screen.  
2. Select TV menu and press the cursor right.  
The TV menu is displayed.  
3. Select TV settings and press the cursor right.  
The TV settings menu is moved to the left.  
>
Sound  
>
Ambilight  
4. Press the MENU/BROWSE key to exit the menu.  
To make it easier to change the settings of the TV, there are  
3 ways of doing it.  
Info  
A. Change settings in an easy-to-use manner with the  
Settings assistant  
Each time you've made a selection, press the green key to  
confirm your selection.  
1. Select Settings assistant and press the cursor right.  
>
By means of several split screens/full screens you are  
prompted to select your preferred picture, sound and  
ambilight settings to finally arrive at a complete setting  
which satisfies you.  
See First time installation, Step 3: Settings assistant:  
select your TV settings, p. 10.  
2. Press the green colour key to return to the TV menu again.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use of the TV menu settings (continued)  
EN  
B. Use of the Standard settings (if present)  
This allows you to reset your settings for viewing and  
listening to predefined factory settings.  
TV menu  
TV settings  
Reset to standard  
1. Select Reset to standard and press the cursor right.  
Current  
Settings assistant  
Reset to standard  
Picture  
>
>
>
A menu appears which allows you to select one of the  
standard settings for viewing and listening.  
Current shows your current settings for viewing and  
listening.  
If you select Natural, it allows you to set your picture,  
sound and ambilight settings to the recommended  
standard values. In most cases this will give the best  
balanced viewing experience.  
Natural  
Vivid  
Subtle  
Sound  
Ambilight  
Info  
>
>
If you select Vivid, it allows you to set your picture,  
sound and ambilight settings to rich values, making use  
of the TV capabilities to its full extend.  
If you select Subtle, it allows you to set your picture,  
sound and ambilight settings to the purest  
representation of the original source content.  
2. Press the green colour key to store the selected setting.  
C. Individual settings for picture, sound and ambilight  
<
Select Picture, Sound or Ambilight and press the cursor  
right.  
>
>
>
>
A menu appears which allows you to fine tune the  
picture, sound and ambilight settings.  
To adjust the Picture settings, see Adjust picture menu  
settings, p. 15.  
To adjust the Sound settings, see Adjust sound menu  
settings, p. 18.  
To adjust the Ambilight settings, see Enjoy Ambilight,  
p. 20.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust picture menu settings  
EN  
The picture menu contains the settings that affect the quality of  
the picture.  
TV menu  
TV settings  
Settings assistant  
Reset to standard  
Picture  
TV settings  
Features  
Installation  
Exit  
1. Press the MENU/BROWSE key on the remote control.  
The main menu appears.  
2. Select TV menu and press the cursor right.  
The TV menu is moved to the left.  
3. Select TV settings and press the cursor right.  
The TV settings menu is moved to the left panel.  
4. Select Picture and press the cursor right.  
The Picture menu is moved to the left panel.  
>
Sound  
>
Ambilight  
>
>
Info  
5. Use the cursor up/down to select the Picture menu items.  
6. Press the cursor right to enter the selected Picture menu  
item.  
Note: all digital related menu items will only be accessible  
in case of digital TV broadcasting.  
TV menu  
TV settings  
Picture  
Contrast  
Brightness  
Colour  
Settings assistant  
Reset to standard  
Picture  
7. Use the cursor keys to adjust the settings.  
8. Press the cursor left to return to the Picture menu.  
Hue  
Sound  
Contrast  
Sharpness  
Tint  
Ambilight  
Adjusts the intensity of bright parts in the picture but keep  
the dark parts unchanged.  
..............  
Brightness  
Info  
Adjusts the light output of the complete picture, which will  
mainly affect the darker areas of the picture.  
Colour  
Adjusts the saturation level of the colours to suit your  
personal preference.  
Hue  
Compensates for the colour variations in NTSC encoded  
transmissions.  
Sharpness  
Adjusts the sharpness of fine details in the picture.  
Tint  
Increases or decreases Warm (red) and Cool (blue)  
colours to suit personal preferences.  
<
<
Select Cool to give the white colours a blue, Normal to  
give the white colours a neutral, Warm to give the white  
colours a red tint.  
Select Custom to make a customised setting in the  
Custom tint menu item.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjust picture menu settings (Continued)  
EN  
Custom tint (only when Tint is set to Custom)  
TV menu  
Fine tunes the white point (WP) and black level (BL) of  
the picture.  
TV settings  
Picture  
.............  
Settings assistant  
Reset to standard  
Picture  
Custom tint  
1. Select Custom tint and press the cursor right.  
2. Use the cursor keys to select and adjust the settings of:  
Pixel Plus  
Digital Natural Mo..  
Dynamic contrast  
DNR  
R-WP: allows you to customise the colour tint by  
adjusting the red whitepoint of the picture.  
G-WP: allows you to customise the colour tint by  
adjusting the green whitepoint of the picture.  
B-WP: allows you to customise the colour tint by  
adjusting the blue whitepoint of the picture.  
Sound  
Ambilight  
.............  
Info  
R-BL: allows you to customise the colour tint by  
adjusting the red blacklevel of the picture.  
G-BL: allows you to customise the colour tint by  
adjusting the green blacklevel of the picture.  
3. Use the colour keys to reset to the predefined settings.  
4. Press the cursor left to return to the Picture menu.  
Pixel Plus  
Pixel Plus is the most ideal setting, as it fully processes  
the image to make every single pixel the best it can be,  
improving contrast, sharpness, picture depth, and colour  
reproduction and brilliance from every source, including  
High Definition.  
<
Select On or Off to activate/de-activate Pixel Plus.  
Digital Natural Motion  
Reduces the field and line flicker and reproduces smooth  
movement especially in movies.  
Select Off, Minimum or Maximum in order to really  
<
see the difference in picture quality.  
Dynamic contrast  
Automatically makes the contrast in the darker and the  
brighter picture areas more noticeable as the image on  
the screen changes.  
<
Normally select Medium. It may be preferred to select  
Minimum, Maximum or Off.  
DNR  
DNR automatically filters out and reduces the image  
noise.This improves picture quality when receiving weak  
signals.  
Select Off, Minimum, Medium or Maximum according  
to the image noise in the picture.  
<
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust picture menu settings (Continued)  
EN  
MPEG artefact reduction  
TV menu  
MPEG artefact reduction On smoothens the  
transitions on digital content.  
Select On or Off.  
TV settings  
Picture  
.............  
Settings assistant  
Reset to standard  
Picture  
<
DNR  
MPEG artefact red.  
Colour enhancem..  
Active control  
Light sensor  
Colour enhancement  
Automatically controls green enhancement and blue  
stretch. It makes the colours more vivid.  
Select Off, Minimum, Medium or Maximum.  
Sound  
Ambilight  
<
Picture format  
Active control  
The TV continuously measures and corrects all incoming  
signals in order to provide the best picture possible.  
Select On or Off to activate/de-activate Active control.  
Info  
<
Light sensor  
Light sensor On automatically adjusts the picture and  
ambilight settings for best viewing dependent on the  
lighting conditions in the room.  
Select On or Off.  
<
Picture format  
This allows you to adjust the size of the picture dependant  
on the broadcasted format and your preferred setting.  
Tip: this function is also accessible via the OPTION key on  
the remote control.  
How to navigate through the TV settings menu, see p. 12:  
Use of the TV menu settings.  
Auto format  
Super zoom  
Choose among the following picture formats:Auto format,  
Super zoom, 4;3, Movie Expand 14:9, Movie Expand 16:9 or  
Wide screen.  
4:3  
Movie expand 14:9  
Auto format makes the picture fill the screen as much as  
possible.  
In case of subtitles in the bottom black bar,Auto format  
makes the subtitles visible.  
In case of a broadcaster logo in the corner of the top black  
bar, the logo disappears from the screen.  
Super zoom removes the black bars on the sides of 4:3  
programmes with minimal distortion.  
Movie expand 16:9 Wide screen  
When in Movie Expand 14:9, Movie Expand 16:9 or Super  
zoom screen format, you can make subtitles visible with the  
cursor up/down.  
Note: with HD sources not all picture formats will be  
available.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust sound menu settings  
EN  
The sound menu contains the settings that affect the quality of  
the sound.  
TV menu  
TV settings  
Sound  
Equalizer  
Volume  
Settings assistant  
Reset to standard  
Picture  
1. Press the MENU/BROWSE key on the remote control.  
>
The main menu appears.  
2. Select TV menu and press the cursor right.  
The TV Menu is moved to the left.  
3. Select TV settings and press the cursor right.  
The TV settings menu is moved to the left panel.  
4. Select Sound and press the cursor right.  
The Sound menu is moved to the left panel.  
Balance  
>
Digital audio lang..  
Dual I/II  
Sound  
Ambilight  
>
Mono/Stereo  
.............  
>
5. Use the cursor up/down to select the Sound menu items.  
6. Press the cursor right to enter the selected Sound menu  
item.  
Info  
Note: dependent on the input signal, one or more menu  
items may not be selectable.  
Manufactured under license from Dolby  
Laboratories.Dolby’ ‘Pro Logic’ and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
7. Use the cursor keys to adjust the settings.  
8. Press the cursor left to return to the Sound menu.  
Equalizer  
Allows you to change the frequency response of the sound  
to match your personal taste.  
Tip: this function is also accessible via the OPTION key on  
the remote control.  
Volume  
Allows you to adjust the sound output level.  
Balance  
Allows you to adjust the output of the right and left  
speakers to obtain the best stereo reproduction for your  
listening position.  
Digital audio language (only with Digital TV broadcasting)  
Allows you to select an audio language out of the list of the  
available broadcasted languages for the current digital  
programme.  
Note: if there is more than one variant for an audio  
language, then select one of the variants.  
To permanently change the audio language, use the  
Language menu in the Installation menu.  
Tip: this function is also accessible via the OPTION key on  
the remote control.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjust sound menu settings (Continued)  
EN  
Dual I/II  
TV menu  
Allows you to select, per channel, Dual I or II, when dual  
sound transmission is available.  
TV settings  
Sound  
.............  
Settings assistant  
Reset to standard  
Picture  
Mono/Stereo  
Surround mode  
Headphone volume  
AVL  
Mono/Stereo  
Allows you to select, per TV channel, Mono or Stereo  
sound when stereo broadcasts are available.  
Sound  
Ambilight  
Surround mode  
Delta volume  
Auto surround  
Allows you to select the modes for more spatial or  
surround sound reproduction dependent on the  
Info  
broadcasted signals or signals from external inputs received.  
Headphone volume  
Allows you to control the level of sound through the  
headphones.  
AVL (AutomaticVolume Leveler)  
Automatically reduces the volume differences between  
channels and programmes, providing a more constant overall  
level.This will also reduce the dynamics of sound.  
Delta volume  
Allows you to correct for any permanent volume differences  
between TV channels or external sources.  
Auto surround  
When switched On, this allows the TV to automatically  
switch to the best surround sound mode the broadcaster  
transmits.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoy Ambilight  
EN  
The ambilight menu contains the settings for controlling the  
ambient lighting. Using ambient light gives a more relaxed  
viewing experience and improves perceived picture quality.  
Analysis of the picture content adapts the colours continuously.  
But the lights can also be set to any fixed colour and many  
shades of white.  
TV menu  
TV settings  
Ambilight  
Ambilight  
Brightness  
Mode  
Settings assistant  
Reset to standard  
Picture  
Colour  
Sound  
Tip: in standby mode the lights can be set/operated to any  
colour and create a unique ambiance in the room. See  
Ambilight in standby mode, p. 22.  
Custom colour  
Separation  
.............  
Ambilight  
Info  
1. Press the MENU/BROWSE key on the remote control.  
>
The main menu appears.  
2. Select TV menu and press the cursor right.  
The TV Menu is moved to the left.  
3. Select TV settings and press the cursor right.  
The TV settings menu is moved to the left panel.  
4. Select Ambilight and press the cursor right.  
The Ambilight menu is moved to the left panel.  
>
>
>
5. Use the cursor up/down to select the Ambilight menu  
items.  
6. Press the cursor right to enter the selected Ambilight menu  
item.  
7. Use the cursor keys to adjust the settings.  
8. Press the cursor left to return to the Ambilight menu.  
Ambilight  
Allows you to switch the lights On or Off at the rear of the  
TV.  
<
<
Select Off to switch off the ambient lights and downlight all  
other ambilight menu items.  
Select On to switch on the ambient lights. Refine the light  
settings in the menus below.  
Brightness  
Allows you to adjust the light output of the ambilights.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Enjoy Ambilight (Continued)  
EN  
Mode  
Allows you to choose for constant background lighting or  
for background lighting that matches the images displayed  
on the screen.  
TV menu  
TV settings  
Ambilight  
.............  
Settings assistant  
Reset to standard  
Picture  
Mode  
<
Use the cursor keys to select Colour, Relaxed, Moderate or  
Dynamic.  
- Colour: this will show constant light according to the  
settings in the Colour menu below. It allows manual fine  
tuning in the next Ambilight menu items.  
- The options Relaxed, Moderate or Dynamic will  
dynamically match brightness and colour to the screen  
content.The selection made will effect the speed which  
determines the viewing impression.  
Colour  
Custom colour  
Separation  
Balance  
Sound  
Ambilight  
Info  
For example:  
- in Relaxed mode, the rate of brightness and colour  
change, as predefined in the factory, is smoothly and soft  
which gives you an immersive yet relaxed viewing.  
- in Moderate mode the rate of brightness and colour  
change can be experienced as between Relaxed and  
Dynamic.  
- in Dynamic mode the rate of brightness and colour  
change is more quick and dynamic.This gives you full  
immersion and involvement with the screen content.  
Notes:  
- the rate of change is limited, as not to cause  
uncomfortable sensations;  
- according to the selection made, some Ambilight menu  
items will be downlighted and can not be selected.  
Colour  
Note: only available when Colour has been selected in the  
Mode menu above.  
Allows you to select or adjust the colour of the light to  
your own personal choice.  
- Warm white is matched to that of most normal  
lightbulbs. Select this setting if you want the Ambilight to  
fit best with normal living room lighting.  
- Cool white is matched to that of normal daylight  
(6500K). Select this setting if you prefer more cool lighting.  
Note: the 6500K is the SMPTE recommended setting for  
ambient backlighting of displays.  
- Blue: preferred by most consumers to create a cool,  
modern and/or mystical atmosphere. Select this setting  
according to your personal taste or mood.  
- Red: preferred by most consumers to create a cosy,  
special atmosphere. Select according to your personal  
taste or mood.  
- Custom: select if you want to customise the ambilight  
colour.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoy Ambilight (Continued)  
EN  
Custom colour  
TV menu  
TV settings  
Note: only available when Custom has been selected in  
the Colour menu.  
Ambilight  
.............  
Settings assistant  
Reset to standard  
Picture  
Mode  
Allows you to customise the ambilight colour.  
Select Palette to select the general colour of the light  
output.  
Colour  
<
<
Custom colour  
Separation  
Balance  
Sound  
Select Saturation to adjust the colourfulness of the light.  
Ambilight  
Separation  
Allows you to define the stereo effect in case, Relaxed,  
Moderate or Dynamic has been selected in the Mode menu.  
Select Off for a mono behaviour which means that all lamps  
will behave equally.  
Select Minimum, Medium or Maximum to define the  
Ambilight stereo effect spread over the available lamps.  
Info  
<
<
Balance  
Allows you to adjust the colour and level of light intensity  
on the left and right side of the picture.  
Ambilight in standby mode  
When the TV is switched off, the ambient lights will also be  
switched off.When the TV is in standby mode, ambilight can  
be used to provide a unique ambience for the room.  
<
Press the Ambilight key on the remote control to switch  
between Ambilight On or Off. See Use of the remote  
control, p. 6.  
<
Press the MODE key repeatedly to toggle through the  
Ambilight modes.  
Note: when the TV is switched to standby, and you switch  
Ambilight On, then less Ambilight modes are available.  
Caution: Infrared interference  
To avoid bad infrared remote control reception, place your  
peripheral equipment out of sight of the ambient lights of  
your TV. Ambilight does not function well when the room  
temperature is less than 59°F/15°C.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust feature menu settings  
EN  
The Features menu allows you to control the settings of  
special TV functions, features and accessory equipments.  
TV menu  
Features  
1. Press the MENU/BROWSE key on the remote control.  
TV settings  
Features  
Installation  
Exit  
Subtitle  
>
The main menu appears.  
2. Select TV menu and press the cursor right.  
The TV Menu is moved to the left.  
3. Select Features and press the cursor right.  
The Features menu is moved to the left panel.  
Digital subtitle lan..  
Sleeptimer  
Childlock  
>
Set/Change code  
On timer  
>
4. Use the cursor up/down to select the Features menu  
items.  
5. Press the cursor right to enter the selected Features  
menu item.  
.............  
Info  
6. Use the cursor keys to adjust the settings.  
7. Press the cursor left to return to the Features menu.  
Subtitle  
This displays Teletext and DVB-T subtitles from the  
selected TV channel.These can be permanently displayed,  
or only when mute is active.The teletext subtitle page of  
analogue channels must be stored for each TV channel.  
1. Switch on teletext and select the proper subtitle page  
from the index.  
2. Switch off teletext.  
3. Select  
- Subtitle On to display the subtitles on the selected TV  
channels.  
- On during mute to automatically display the subtitles  
only when the sound has been muted with the ¬ key  
on the remote control.  
Tip: this function is also accessible via the OPTION key on  
the remote control.  
Digital subtitle language (only with Digital TV broadcasting)  
This allows you to (temporarily) select your preferred  
subtitle language out of the list of the broadcasted languages  
for the current programme.  
Note: to permanently change the subtitle languages, use  
the Language menu in the Installation menu.  
<
Use the cursor up/down to temporarily overrule your  
permanent language selection and confirm with the OK key.  
Tip: this function is also accessible via the OPTION key on  
the remote control.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjust feature menu settings (Continued)  
EN  
Sleeptimer  
TV menu  
Features  
This sets a time period after which the TV automatically  
switches to standby.  
1. Select Sleeptimer.  
2. Press the cursor right.  
TV settings  
Features  
Installation  
Exit  
.............  
Sleeptimer  
Childlock  
3. Select a value with the cursor up/down.  
Set/Change code  
On timer  
>
The list will have values from 0 to 180 minutes.When 0  
is selected, the sleeptimer is switched off.  
Common interface  
Demo  
Note: you can always switch off your TV earlier or select  
another time set.  
Info  
Childlock  
With a 4-digit code, you are able to lock TV channels and  
external sources to prevent children from watching certain  
programmes.  
1. Select Childlock.  
2. Press the cursor right to enter the Childlock menu.  
3. Enter your 4-digit code.  
Note: you have to re-enter your code each time you  
enter the Childlock menu.  
4. Select one of the menu items of the Childlock menu and  
press the cursor right:  
- Lock to lock all channels and externals:  
- Custom lock to lock a certain programme or to lock all  
the channels from a certain time.  
< Select:  
- Lock after to lock all programmes from a certain time  
onwards.  
< Press the cursor right twice.  
< Select On to set the lock.  
< Press the cursor left.  
< Select Time and press the cursor right.  
< Enter the time with the cursor up/down and right.  
- Channel lock to lock a certain TV channel or external.  
< Press the OK key to activate/deactivate.  
- Parental rating to set an age rating to a digital  
programme if the programme is parental rated.The  
ratings applied are according the selected country in the  
initial installation.  
< Press the cursor right and select an age rating with the  
cursor up/down.  
- Select Unlock to disable all locks you have set.  
Important: you have forgotten your code !  
1. Select Change code and press the cursor right.  
2. Enter the overriding code 8-8-8-8.  
3. Enter a new personal 4-digit code.  
4. Confirm your new entered code.  
>
The previous code is erased and the new code is stored.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust feature menu settings (Continued)  
EN  
Set code/Change code  
TV menu  
Features  
This allows you to set or change the personal 4-digit access  
code that is used in the different lock functions of the TV.  
TV settings  
Features  
Installation  
Exit  
.............  
Sleeptimer  
Childlock  
<
<
Select Set or Change code.  
>
If no PIN-code exists yet, the menu item is set to Set  
code. Follow the instructions on screen.  
If a PIN-code has previously been entered, the menu  
item is set to Change code. Follow the instructions on  
screen.  
Set/Change code  
On timer  
>
Common interface  
Demo  
Enter your code with the digit keys.All number  
combinations from 0000 to 9999 are valid numbers.  
Info  
>
The Features menu reappears with a message confirming  
that your PIN-code has been created or changed.  
On timer  
From standby, this automatically switches the TV to the  
specified channel number, at a specified time.  
1. Select On timer.  
2. Press the cursor right to enter the On timer menu.  
3. Select Timer and press the cursor right.  
4. Select On.  
5. Select Channel and then the TV channel you want your TV  
to switch to on a selected time and day  
6. Select Day and then a day of the week or select Daily.  
7. Select Time and enter the time with the digit keys or with  
the cursor up/down.  
8. Press the OK key to activate.  
9. Press the cursor left to return to the Features menu or  
press the MENU/BROWSE key to switch off the menu.  
Note: From now on, every week, your TV will  
automatically switch to the selected channel, on the  
selected day, at the selected time, until the On timer  
function is switched off again.  
Note: only one On timer can be set.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust feature menu settings (Continued)  
EN  
Common interface  
TV menu  
Features  
Note: this functionality is only available in certain countries.  
TV settings  
Features  
Installation  
Exit  
.............  
Sleeptimer  
Childlock  
This allows you to access common interface applications  
defined by the service provider of the Common Interface  
(CI) module.  
The Common Interface (CI) module can contain one or  
more applications, which are used to communicate with the  
CI service provider and provide some additional facilities to  
the user.  
Set/Change code  
On timer  
Common interface  
Demo  
See Use the Common Interface slot, p. 53.  
Info  
Note: this menu item and the common interface  
applications are only selectable when an authenticated  
Common Interface card is present and some Common  
Interface card user interface sessions are listed.  
The CI service provider is responsible for the messages  
and texts on screen. In case of failure or strange behaviour,  
you must call your CI service provider.  
TV menu  
Features  
Demo  
Demo  
Pixel Plus  
Subtitle  
This allows you to get an idea of the features that are part  
of the television.  
Ambilight  
Dig. subtitle langu.  
Sleeptimer  
Settings assistant  
Active control  
1. Select Demo.  
Childlock  
2. Press the cursor right.  
3. Select a desired demo.  
4. Press the OK key to start the demo.  
The selected demo is played once.  
5. Press the red colour key to stop the demo and to return to  
Set/Change code  
On timer  
Common interface  
Demo  
>
the demo menu.  
6. Press the red colour key to exit the demo menu.  
Info  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to search for and store TV channels  
EN  
Tip: you will need this chapter only if you want to change the installation settings.  
Installation menu  
This menu will adjust settings related to the installation of the  
TV channels, language and country and to the initial installation  
of your TV.  
Television  
TV menu  
TV channels  
Programme guide  
Multimedia  
TV menu  
1. Press the MENU/BROWSE key on the remote control.  
>
The main menu appears.  
2. Select TV menu and press the cursor right.  
The TV Menu is moved to the left.  
3. Select Installation and press the cursor right.  
The Installation menu is moved to the left panel.  
Installation  
>
TV settings  
Features  
Installation  
Exit  
Languages  
Country  
>
4. Use the cursor up/down to select the Installation menu  
Time zone  
Channels  
Preferences  
Connections  
.............  
items.  
5. Press the cursor right to enter the selected Installation  
menu item.  
6. Use the cursor keys to make a selection.  
7. Press the OK key to activate or to confirm.  
8. Press the cursor left to return to the Installation menu or  
press the MENU/BROWSE key to switch off the menu.  
Info  
Select your language preferences  
This menu allows you to select your preferred language for  
menu, audio and subtitle.  
TV menu  
Installation  
Languages  
Menu language  
Menu language  
Preferred audio l...  
Preferred subtitle...  
Hearing impaired  
Languages  
Country  
This allows you to select your menu language out of the list  
of the available languages.  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
Preferred audio language (only with Digital TV broadcasting)  
This allows you to select your audio language preference in  
case several languages are broadcasted.  
Preferred subtitle language (only with Digital TV broadcasting)  
.............  
This allows you to select your subtitle language preference  
in case several languages are broadcasted.  
Info  
Hearing impaired (only with Digital TV broadcasting)  
This allows you to select the hearing impaired audio or  
subtitle language.  
When set to On, the Hearing impaired version of your  
preferred audio or subtitle language will, if available, be  
reproduced.  
When set to Off, the normal audio and subtitle language  
behaviour will be applicable.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to search for and store TV channels (Continued)  
EN  
Select your country  
TV menu  
Installation  
TV settings  
Features  
Installation  
Exit  
.............  
This allows you to select the country where you are now  
located.  
Channels  
Preferences  
Connections  
Decoder  
Notes:  
- if you select a wrong country, the channel numbering will not  
be according to the standard for your country;  
- in case the country selected is not DVB-T supported by your  
TV, digital related menu-items will not be accessible.  
Factory settings  
Software upgrade  
Info  
(only with digital TV broadcasting)  
Select the time zone  
Only applicable for certain countries and dependent on the  
selected country.  
This allows you to select your local time zone so that the clock  
display shows the correct time.  
Store TV and radio channels  
After language and country are set correctly, you can now  
search for and store the TV channels.  
TV menu  
<
Select Channels in the TV, Installation menu.  
Installation  
Channels  
Automatic installation  
Autom. installation  
Installation update  
Digital: test recept..  
Analogue: manual..  
Rearrange  
Languages  
Country  
The TV will scan the entire frequency spectrum based on  
the selected country.  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
>
All available digital and analogue TV and digital radio  
channels are searched for and stored automatically.  
This will take a few minutes.  
>
When the search is complete, the menu will indicate the  
number of digital and analogue channels found.  
.............  
Info  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to search for and store TV channels (Continued)  
EN  
Installation update (only with Digital TV broadcasting)  
TV menu  
This allows you to automatically tune to and update all  
available digital channels without altering the sorting of  
existing channels. For example, the name of the channel is  
not altered.  
Installation  
Channels  
Autom. installation  
Installation update  
Digital: test recept..  
Analogue: manual..  
Rearrange  
Languages  
Country  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
Notes:  
- this will not reinstall uninstalled channels;  
- digital channels that are not encountered any longer will  
be removed;  
- new channels found will not be added to any favourite  
list;  
.............  
- already installed channels will not be renumbered.  
- installation update happens automatically when your TV  
is in standby mode.  
Info  
Digital: test reception (only with Digital TV broadcasting)  
This allows you to see the quality and the strength of the  
signal reception for a digital frequency.This enables you to  
find the antenna position that gives the best reception.  
<
Select Digital: test reception and press the cursor right.  
>
You obtain an indication of the actual channel frequency,  
the network name, the signal quality and strength.  
If the signal quality and strength is poor, you can try  
repositioning the aerial.  
>
Tip: it is however advisable to contact a specialised aerial  
installer in order to achieve the best results.  
You can also directly enter the frequency of the digital  
channels you want to test.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to search for and store TV channels (Continued)  
EN  
Analogue: manual installation  
TV menu  
This gives you the possibility to manually install (tuning-in  
channel by channel) analogue channels. Manual installation  
will not find nor store any DVB-T (digital) channels.  
Installation  
Channels  
Autom. installation  
Installation update  
Digital: test recept..  
Analogue: manual..  
Rearrange  
Languages  
Country  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
1. Select Analogue: manual installation and press the  
cursor right.  
2. Select System.  
3. Select your country or part of the world where you are  
now located.  
4. Select Search and press the cursor right.  
5. Select the red or green colour key to proceed.  
.............  
Info  
Tip: if you know the frequency, enter the 3 digits of the  
frequency with the digit keys 0 to 9 (For example, 049).  
6. Press the cursor left to store the channel found or to  
search for another channel.  
7. Select Fine tune and press the cursor right.  
Fine tuning can be useful when the frequency has shifted a  
bit or when interference of another frequency occurs.  
Adjust the frequency with the cursor up/down in case of  
poor reception of the channel found.  
8. Select Store current channel if you want to store the  
(fine tuned) frequency under the current channel number.  
Press the cursor right and confirm with the OK key.  
Select Store as new channel if you want to store the  
(fine tuned) frequency under a new channel number.  
Press the cursor right and confirm with the OK key.  
9. Use the rearrange menu to rename or reshuffle the  
channels. See next page.  
Note: when on a frequency where a DVB signal is  
broadcasted, the tuner will try to decode an analogue TV  
channel, and hence will not show video.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rearrange the channel number list  
EN  
This allows you to rename, to reshuffle and to uninstall or  
reinstall the stored channels.  
Press the corresponding colour keys and follow the on  
screen instructions.  
TV menu  
Installation  
Channels  
<
Autom. installation  
Installation update  
Digital: test recept..  
Analogue: manual..  
Rearrange  
Languages  
Country  
Reshuffle  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
This allows you to change the order of the stored TV  
channels.  
1. Select the channel you want to change place.  
2. Press the yellow colour key to move up a single position in  
the list.  
3. Press the blue colour key to move down a single position in  
the list.  
4. Repeat to reshuffle other TV channels.  
.............  
Info  
TV menu/Installation  
Channels  
Rename  
Rearrange  
This allows you to change the name stored in the memory  
or to assign a name to a channel or external for which a  
name has not yet been entered.  
0
1
2
3
4
5
6
7
Automatic instal...  
Installation update  
Digital: test rec....  
Analogue: manual  
Rearrange  
1. Select the channel you want to rename.  
2. Press the red colour key on your remote control.  
3. Select the characters with the cursor up/down. Select the  
following position with the cursor right.  
4. Press the green colour key or the OK key when finished.  
Notes:  
- press the yellow colour key to delete all characters.The  
cursor is positioned at the beginning again;  
- press the blue colour key to delete the character the  
cursor is positioned. Enter a new character with the  
cursor up/down;  
- a name can be given to the channel numbers 0 to 999;  
- space, numbers and other special characters are located  
between Z and A.  
Info  
Rearrange  
0
1
2
3
4
5
6
7
5. Select another channel number and repeat steps 2 to 5.  
Uninstall - reinstall  
This allows you to uninstall a stored channel so that it is no  
longer possible to tune to.This also allows you to reinstall  
an earlier uninstalled channel.  
Rename  
Uninstall Move  
up  
Move  
down  
1. Select the channel you want to uninstall.  
2. Press the green colour key to uninstall the selected channel.  
>
The uninstalled channel is indicated in the list by an icon  
in front of the uninstalled channel.  
3. Press the green colour key again to reinstall the uninstalled  
channel.  
Note: uninstalled channels are not reinstalled during an  
installation update.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Set your preferences  
EN  
This menu contains items that can set or adjust various special  
TV functions and that will typically be accessed only  
occasionally.  
TV menu  
Installation  
Preferences  
Location  
.............  
Teletext 2.5  
OSD  
Time zone  
Select your location  
Channels  
This allows you to select the location of your TV.  
If you choose for Shop it will result in fixed settings of  
picture, sound and ambilight.  
The location Home will give full flexibility to change any  
predefined settings for picture, sound and ambilight.  
Programme title  
Preferences  
Connections  
Decoder  
Factory settings  
Software upgrade  
Info  
SelectTeletext 2.5  
Some broadcasters offer the opportunity to see more  
colours, other background colours and nicer pictures in the  
teletext pages.  
<
<
Select Teletext 2.5 On to take advantage of this feature.  
Select Teletext Off if you like the more neutral teletext  
layout.  
>
The selection made is valid for all the channels which  
broadcast Teletext 2.5.  
Note: it may take a few seconds before teletext broadcast  
switches over to Teletext 2.5.  
Select the On Screen Display (OSD)  
This allows you to select the display of the volume bar and  
a reduced or extended on screen display of programme and  
channel information.  
<
<
Select Minimum to activate the display of reduced channel  
information.  
Select Normal to activate the display of extended channel  
and programme information. For example, information on  
the programme, input signal quality of connected peripheral  
equipment, the screen format and sound mode, selected  
audio language, subtitle language, ratings, remaining time of  
the sleeptimer setting,...  
Display a Programme title  
This allows you, to display the programme title according to  
the transmitted information.  
>
When selected Yes, after the selection of a TV  
programme or after you press the i key on the  
remote control, a programme title will be displayed if  
transmitted.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Select your connections  
EN  
This allows you to select the peripheral equipment you have  
connected to the audio and video connectors.  
TV menu  
Installation  
Connections  
EXT1  
.............  
1. Select Connections.  
2. Press the cursor right.  
EXT2  
Time zone  
3. Select the input to which the peripheral equipment is  
connected.  
EXT3  
Channels  
HDMI 1  
HDMI 2  
Preferences  
Connections  
Decoder  
>
When you select EXT1, EXT2, EXT3, HDMI 1,  
HDMI 2, Side or Digital Audio In, a list appears  
which allows you to identify which type of peripheral  
equipment is attached to this input.  
Side  
Factory settings  
Software upgrade  
Digital Audio IN  
4. Press the cursor right again to enter the list of types of  
peripherals connected to the selected input.  
5. Select the peripheral equipment with the cursor up/down.  
Info  
Digital Audio In  
If a peripheral equipment has a digital audio output, you can  
connect this with a single cable to the TV’s DIGITAL  
AUDIO IN connector.  
In the Connections menu, assign the Digital Audio In to the  
corresponding external input to which your peripheral  
equipment is connected.  
In addition to accepting audio input via Digital Audio In, the  
TV can output encoded Dolby Digital audio via the  
DIGITAL AUDIO OUT connector to an external amplifier  
or receiver. If your amplifier or receiver has a matching  
connector for Digital Audio In, you can connect it with a  
single cable to the TV's DIGITAL AUDIO OUT.  
See To make video and audio connections, Connect a Home  
Cinema amplifier, p. 52.  
Select a Decoder channel number  
This allows you to define one or more channel numbers as  
decoder channel numbers when a decoder or a descrambler is  
connected to EXT1 or EXT2.  
TV menu  
Installation  
Decoder  
Channel  
Status  
.............  
Time zone  
1. Select the channel number under which you have stored the  
programme that comes from your decoder or descrambler.  
2. Select Status.  
3. Select the input used to connect your decoder: None,  
EXT1 or EXT2.  
Channels  
Preferences  
Connections  
Decoder  
<
Select None if you do not want the selected channel  
Factory settings  
Software upgrade  
number being activated as a decoder channel number.  
Info  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Reset the Factory settings  
EN  
TV menu  
This allows you to reset most of the predefined factory states.  
Installation  
Factory settings  
Reset  
1. Select and press the cursor right.  
2. Press the OK key to erase settings and reset them to their  
default values.  
.............  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
Factory settings  
Software upgrade  
Info  
How to upgrade the TV software  
This allows you to upgrade your TV software using a USB  
device.  
TV menu  
Installation  
Software upgrade  
Current softw. info  
Local upgrades  
Announcement  
USB device upgrade  
.............  
Time zone  
It is possible to initiate an upgrade procedure from a USB  
device before you start up the TV.The memory device must  
be filled with the appropriate upgrade image (and structure)  
website.  
How to upload a new software version on your memory  
device, see Annex 2, Philips TV software upgrade with  
portable memory, p. 58.  
Channels  
Preferences  
Connections  
Decoder  
Factory settings  
Software upgrade  
Info  
Automatic software announcement (if present)  
When you switch on your TV a message may appear that a  
new software upgrade is available.  
<
<
Press the red colour key on your remote control if you  
want to be reminded later on.  
Press the green colour key on your remote control to  
confirm you have read the message.  
>
Once you have confirmed, the message will not pop up  
again.  
If however, you want to see the last broadcasted  
announcement again, select Announcement in the  
Software upgrade menu.  
Note: as long as the software upgrade has not been  
executed, the message will be available.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Create your favourite list  
EN  
This allows you to create up to four favourite channels lists  
with your preferred TV channels and radio stations. For  
example, each member of your family can create his/her own  
favourite list.  
Note: when this key is pressed the first time after you have  
finished the installation, it will bring up the full channel list. In  
other situations it will bring up the last selected channel list.  
To select a channel from the displayed favourite list  
All channels  
1. Press the FAV key.  
>
The last selected channel list appears.  
EXT1 HDD/DVDR  
2. Use the cursor keys to select a channel.  
3. Press the OK key to display the selected channel.  
HDMI1 PC  
1  
2  
3  
5  
6
VRT  
CNN  
VTM  
BBC  
.........  
To select another favourite channel list  
1. Press the FAV key.  
>
The last selected channel list appears.  
TV/Radio  
2. Press the cursor left.  
3. Use the cursor up/down to select a list.  
4. Press the red colour key to rename the lists if you want to.  
5. Press the FAV key again to exit.  
All channels  
Favourites  
All channels  
Favourite 1  
Favourite 2  
Favourite 3  
Favourite 4  
EXT1 HDD  
HDM1 PC  
To create a favourite list or to modify the list  
1
2
3
4
5
VRT  
1. Press the FAV key.  
CNN  
VTM  
BBC  
........  
>
The last selected channel list appears.  
2. Press the cursor left.  
3. Select your desired channel list.  
4. Press the cursor right.  
5. Press the red colour key to add channels.  
Rename  
list  
>
All channels present in the list are displayed.The  
favourite channels are marked.  
6. Use the cursor up/down to select the channel you want to  
add to or skip from the list.  
7. Press the green colour key to mark or unmark the  
highlighted channel and to add it to or remove it from your  
selected favourite list.  
Favourite 1  
1  
2  
3  
5  
6
VRT  
CNN  
VTM  
BBC  
.........  
Note: press the red colour key again to display the list  
holding your favourites  
8. Press the FAV key again to exit.  
>
With the –P+ key you will be able to browse through  
the TV channels of the selected list.  
Add channels  
Note: with the digit keys you can still select channels  
which are not marked as favourite.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Create your favourite channels list (Continued)  
EN  
To select only TV or only radio channels on the All  
channels list  
When the All channels list is displayed or selected you may filter  
the list and select a list with only the TV channels or a list with  
only the radio channels.  
1. Press the FAV key.  
>
The last selected channel list appears.  
2. Press the cursor left.  
3. Select the All channels list and press the cursor right.  
4. Press the red colour key to filter.  
5. Select your desired channels list.  
6. Press the FAV key again to exit.  
>
With the –P+ key you will be able to browse through  
the TV channels of the filtered list.  
Note: the filtering will not be remembered after the TV is  
switched off or set to standby.  
(only with Digital TV channels)  
EPG (Electronic Programme Guide)  
The Electronic Programme Guide shows you detailed  
information about the current programme and also about the  
next programme (only for TV programmes that provide EPG  
information).  
Note: these instructions may differ according to the type of  
Electronic Programme Guide.  
1. Press the a key.  
>
The EPG screen appears. Dependent on conditions it  
may take some time to acquire EPG data.  
The EPG screen updates automatically if the EPG data is  
acquired successfully. If not, the EPG screen remains  
blank.  
>
a
>
Information about the selected programme appears.  
<
Use the coloured keys to activate the available EPG features  
displayed at the bottom of the screen.  
2. To quit the Programme Guide page, press the a key again.  
a
When the type of Electronic Programme Guide  
available, displays a list ofTV programmes:  
1. Use the cursor up/down to select a desired TV programme.  
>
Information about the selected programme appears.  
Tips:  
- the EPG screen will not include TV channels which are  
not in the Preferred channel list or which are uninstalled  
(See Rearrange menu).  
- new added channels (via reinstallation or installation) will  
have to be marked in the preferred EPG channel list  
before you can see EPG data.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EPG (Electronic Programme Guide) (Continued)  
EN  
2. Press the green colour key on the remote control to  
watch/listen to the selected programme currently on air.  
3. Press the red colour key to mark/unmark a reminder on  
the selected programme. You can set up to a maximum of  
10 reminders.  
>
The TV will wake up automatically or display a message  
when the programme is about to start. Follow the  
instructions on screen to watch the programme.  
4. Press the yellow colour key to jump to the Next or the  
Previous day or back to Today.  
5. Press the MENU/BROWSE key, while Programme Guide is  
active, to activate the Programme Guide main menu.  
° Use the cursor up/down to highlight and select a menu  
item.  
a
- What's on allows you to browse through the  
programme guide information of your preferred EPG  
channels.  
- Search by genre allows you to search for the  
programmes according to a selected genre.  
- Scheduled reminders allows you to view and change  
the reminders you have set.  
a
Note: the reminder(s) will wake up your TV from  
standby only if you switched off your TV with the B  
key on your remote control.  
- Preferred EPG channels are the channels from which  
the EPG data is currently being acquired.This menu  
allows you to mark/unmark (up to 50) preferred EPG  
channels.  
Note: after the installation of your channels, by default  
40 channels with available EPG data will automatically  
be marked as preferred EPG channel.  
Programme Guide What’s on  
12:00 South today  
What’s on  
13:30 Working lunch  
12:30 Brainteaser  
12:00 This is BBC THREE  
.........  
Search by genre  
Scheduled reminders  
Preferred EPG chann..  
Acquire EPG data  
- Acquire EPG data allows you to update the  
information for the preferred programme guide  
channels. Follow the instructions on screen.  
Note: Acquisition of EPG data is done automatically  
while watching TV.  
6. To quit the Electronic Programme Guide, press the a key  
again.  
Info  
Tips:  
- the EPG screen will not include TV channels which are  
not in the Preferred channel list or which are uninstalled  
(See Rearrange menu).  
- new added channels (via reinstallation or installation) will  
have to be marked in the preferred EPG channel list  
before you can see EPG data.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multimedia Browser  
EN  
The Multimedia browser lets you display pictures, movies or  
play audio files stored on a USB device.The Multimedia browser  
application is invoked from the main menu.  
-Following file formats can be reproduced:  
for pictures: JPEG  
for audio: MP3, MP3 Pro, LPCM  
for video: MPEG1, MPEG2  
- Only FAT/DOS-formatted memory devices are supported.  
- Philips can not be held responsible if your USB device is not  
supported.  
a
To view content from a USB device  
Tip: if your USB device does not fit into the USB connector at  
the side, use an USB extend cable to connect the USB device  
to the USB port.Ask your dealer for more information.  
To insert a USB device  
Note: USB devices are not supplied with this TV.  
In case of a USB-memory stick or a digital camera, connect  
it to the USB connector at the side. See To make video and  
audio connections, Side panel overview, p. 45.  
When a USB device is inserted, the Multimedia browser  
menu is displayed automatically. See further.  
To remove the USB device  
1. Press the MENU/BROWSE key on the remote control to  
switch off the main menu.  
2. Remove the USB device.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Multimedia Browser (Continued)  
EN  
Multimedia Browser menu  
Television  
Multimedia  
TV menu  
1. Insert a USB device.  
2. Select the USB device under Multimedia with the cursor  
up/down.  
TV channels  
Programme guide  
>
>
>
The Multimedia browser allows you to browse content  
stored on the inserted USB device.  
The 2-panel browser will be shown with the left panel  
containing the content types (Music, Pictures, Movies).  
The right panel will display the content that is available  
of the selected content type.  
Picture  
USBDevice 1  
Music  
London 2005  
The Beatles  
Xmas2004.alb  
arnold.jpg  
3. Press the cursor right to enter the content.  
4. Press the cursor up/down to select a content.  
5. Press the cursor right to enter the content.  
6. Press the cursor up/down to select a file or a directory.  
Picture  
Movies  
Note: press the green colour key to display all the image  
files in the current directory as thumbnails when browsing  
pictures. Press the green key again to display the image  
files in a list.  
USBDevice 1  
Picture  
London 2005  
pic001.jpg  
pic002.jpg  
pic003.jpg  
pic004.jpg  
London2005  
The Beatles  
Xmas2004.alb  
arnold.jpg  
7. In case a file is selected, press the OK key to display a  
picture file or to play a video or an audio file.  
In case a directory, album or playlist is selected, press  
the cursor right to enter the content or press the OK key  
to start a slide show or a loop playback of the files present.  
8. Press the cursor left to keep music playing and switch back  
to the Multimedia menu.  
9. Press one of the colour keys on the remote control to  
perform the corresponding function mentioned at the  
bottom of the screen.  
USBDevice 1/Picture/London2005  
pic001.jpg  
London2005  
pic001.jpg  
pic002.jpg  
pic003.jpg  
pic004.jpg  
Tip: the blue colour key can, if necessary, be used to let  
USBDevice 1/Picture/London2005  
the colour keys reappear.  
London2005  
pic001.jpg  
10. To stop playing content, press the key on the remote  
control.  
Notes:  
- your TV supports slide shows with background music.  
See Annex 3, Philips TV-slideshow format with  
background music, p. 61;  
pic001.jpg  
- the playback will continue to play even if temporarily  
switched to browser screens.The audio will be stopped  
when another song starts playing, or when the end has  
been reached;  
Press OK to play.  
- more technical remarks can be found in Annex 4, Philips  
TV-Digital camera and USB issues, p. 63.  
Following icons may appear:  
folder  
self made playlist/album  
video  
pictures  
music  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multimedia Browser (Continued)  
EN  
Function keys at the bottom of the screen  
Details  
to display a description of the selected file  
or directory  
Transitions  
Slide time  
to select if you like to apply a transition  
during a slide show  
to select the duration a picture will be  
displayed in a slide show  
Rotate  
to rotate a picture  
Repeat one/all  
Shuffle  
to repeat the playback of a music file  
to shuffle music collections in a random way  
Zoom  
to select one of the zoom magnifications  
(x1, x2, x4) with the cursor up/down.  
Additionally you can shift the selected zoom  
window over the screen with the cursor  
keys.  
Full/small screen to toggle between a full or a small screen  
Note: to rotate a picture or to select one of the zoom  
OK  
magnifications, first stop the slide show with the  
key or  
the blue colour key.  
Multimedia function keys on the remote control  
Ò
to fast rewind displaying content  
to stop playing content  
π
- to play a single file, start a slide show, playback of a  
folder or other collection  
- to pause playing content  
to fast forward displaying content  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext  
EN  
Note:Teletext is not available via equipment connected to the  
HDMI  
connector.  
Most TV channels broadcast information via teletext.  
This TV has a 1200 pages memory that will store most  
broadcasted pages and subpages to reduce waiting time.After  
each programme change, the memory is refreshed.  
<
Press b to switch the teletext on.  
The main index page appears on the screen.  
>
a
Select aTeletext page  
<
Enter the desired page number with the digit keys or with  
the -P+ key.  
<
Select the options at the bottom of the screen with the  
colour keys.  
Previous selected teletext page  
Press the 0 key.  
<
SelectT.O.P. teletext broadcasts  
<
Press i.  
A T.O.P. overview of the teletext subjects available is  
displayed.  
>
<
Select with the cursor up/down, left/right the desired  
v
subject and press the OK key.  
Note: not all TV channels broadcast T.O.P. teletext.  
Select subpages  
When a selected teletext page consists of different  
subpages, a list of available subpages appears on the screen.  
Press the cursor left or right to select the next or previous  
subpage.  
Picture/Teletext  
1. Press the b key.  
2. Press the b key to show Teletext on the right of the  
screen.  
3. Press the b key to return to a full teletext picture.  
4. Press the b key to return to a full screen picture.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Teletext (Continued)  
EN  
Hypertext  
With hypertext you can quickly jump to a pagenumber or  
search for a specific word shown on the current teletext  
page.  
1. Press the OK key to highlight the first word or a number  
on the page.  
2. Use the cursor up/down, left/right to select any other word  
or number you want to search for.  
3. Press the OK key to confirm.The search starts.  
>
A message appears at the bottom of the screen to  
indicate the searching, or that the word or page is not  
found.  
4. Use the cursor up until the top of the page to exit  
hypertext.  
a
Enlarge aTeletext page  
<
Press the OPTION key on the remote control repeatedly  
to display the upper teletext part, the lower teletext part  
and then to return to the normal teletext page size.  
Teletext menu  
The Teletext menu offers various functions to control teletext.  
Menu  
1. Switch teletext on and press the MENU/BROWSE key to  
activate the menu.  
2. Press the cursor up/down to select the menu items.  
3. Press the OK key to activate.  
4. Press the MENU/BROWSE key to leave the teletext  
menu.  
Reveal  
Off  
Cycle subpages  
Language  
Off  
Gr. II  
Reveal  
Reveals/conceals hidden information on a page, such as  
solutions to riddles and puzzles.  
Cycle subpages (if subpages are available)  
Makes the subpages cycle automatically.  
<
Press the OK key to activate and to deactivate again.  
Language  
If the displayed characters on screen do not correspond  
with the characters used by the teletext broadcaster, you  
can change the language group here.  
<
Select Group I or Group II with the OK key.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext (Continued)  
EN  
Digital text (only for UK)  
Some digital channels offer dedicated digital text services (for  
example BBCi).  
1. Press b to switch Digital text on.  
Note: UK only: Digital text is displayed when programmes  
are carrying digital text or interactive services.  
a
2. To use the digital text, follow the instructions on screen.  
3. Depending on the service, you may be asked to use the  
cursor keys, the OK key, the coloured keys, the teletext key  
and sometimes the digit keys.  
4. When you have finished watching teletext, select a different  
channel with the -P+ keys or follow the instructions on  
screen to return to picture.  
5. Press CANCEL to cancel digital text or interactive  
services.  
Text info  
Some digital channels also offer information on the  
programme being broadcast. In that case a message may  
appear at the bottom of the screen for a few seconds.  
Follow the instructions on screen and use the cursor keys  
to scroll through the next pages.  
v
Note: digital text will not be available when Subtitles are set  
to On in the Features menu.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To make video and audio connections  
EN  
Tip: use the inputs that are available on your equipment that provide the best video or audio  
performance, as below.  
Note: your TV comes with all types of connectors with the exception of the DVI connector but  
some of your equipment may be equipped with this type. In this case you'll need a DVI to HDMI  
adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer.  
Warning: be sure to connect the DVI output connector first, then connect to the HDMI input on  
your TV.  
Audio connection  
Connector cable  
required  
HDMI  
(High-Definition  
Multimedia  
No  
HDMI  
interface)  
Y
Pb  
Pr  
H
V
L/R  
RGB H/V  
Yes  
G
B
H
R
V
EXT3  
AUDIO L/R  
AUDIO L / R  
EXT3  
Y
Pb  
Pr  
H
V
L/R  
Yes  
Component video  
(480p/576p/720p/  
480i/576i/1080i)  
G
B
R
EXT3  
EXT3  
AUDIO L / R  
Scart  
No  
Yes  
EUROCONNECTOR  
S-VIDEO  
S-Video  
VIDEO  
Yes  
No  
Video  
75  
RF/Coaxial  
Notes:  
- cables are often colour-coded to connectors. Connect red to red, white to white....  
- component video (YPbPr) connection is necessary to view video sources, for example digital  
broadcastings coming from a settop box, in 1080i, 720p, 576i, 576p, 480i or 480p.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To make video and audio connections - Side panel overview  
EN  
Camera, Camcorder, Game  
1. Connect your camera, camcorder or game as  
shown.  
2. Connect to VIDEO 2 and AUDIO L 3 for  
mono equipment. For stereo equipment also  
connect AUDIO R 3.  
S-VHS quality with an S-VHS camcorder is  
obtained by connecting the S-VHS cables with  
USB  
the S-VIDEO input 1 and AUDIO inputs  
3.  
Warning: do not connect cable 1 and 2  
at the same time.This may cause picture  
2
3
distortion !  
1
Headphone  
1. Insert the plug into the headphone socket L  
as shown.  
2. The headphone impedance must be between 8  
and 4000 Ohm.The headphone socket has a  
3.5 mm jack.  
In the Sound menu select Headphone  
volume to adjust the headphone volume.  
Tip: Press ¬ on the remote control to  
switch off the internal loudspeakers of the TV.  
USB  
See Multimedia browser, p. 38.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To make video and audio connections - Rear panel overview  
EN  
Y
Pb  
Pr  
G
B
V
R
H
AUDIO L/R  
EXT3  
EXT2  
EXT1  
VCR  
o
o
o
o
o
DIGITAL  
HDMI  
1
HDMI  
2
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT  
o
R
O
U
T
A
U
D
I
O
DVD player  
VGA  
Satellite  
receiver  
PC -VGA  
Cable box  
CABLE  
1 DVD recorder - 1VCR  
2 DVD recorders  
2VCRs  
Y
Pb  
Pr  
G
B
V
R
H
AUDIO L/R  
EXT3  
EXT2  
Decoder  
VCR  
EXT1  
Decoder  
Decoder  
o
o
o
o
o
DIGITAL  
O
HDMI 1  
HDMI 2  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o  
R
OUT AUDIO  
Analogue  
Home Cinema  
amplifier  
DVI  
PC DVI  
DVD player  
Cable box  
DVD player  
Cable box  
DVI  
DVI  
Analogue  
Home Cinema  
amplifier  
Digital  
Home Cinema  
amplifier  
Game console  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect a VCR or DVD recorder  
EN  
Warning: do not place your recorder too close to the screen as some recorders may be susceptible  
for signals from the display. Keep a minimum distance of 0,5 m from the screen.  
EXT2  
EXT1  
EXT  
1 / 2  
With a eurocable  
CABLE  
1. Connect the aerial cables 1 and 2 as  
shown.  
2. Connect the eurocable 3 as shown.  
3. Make your selection of the source to which  
theVCR has been connected in the Installation  
menu, Select your connections, p. 33.  
1
o
o
o
DIGITAL  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT  
o
R
OUT AUDIO  
3
2
RECORDER  
With the aerial cable only  
1. Connect the aerial cables 1 and 2 as  
shown.  
CABLE  
2. Tune in your recorder’s testsignal and store the  
testsignal under programme number 0.  
See Analogue: manual installation, p. 30.  
See also the handbook of your recorder.  
1
o
o
o
DIGITAL  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT  
o
R
OUT AUDIO  
2
RECORDER  
Connect a decoder and aVCR  
4
Connect a eurocable 4 to your decoder and  
to the special euroconnector of your recorder.  
See also the handbook of your recorder.  
RECORDER  
DECODER  
Tip: you can also connect your decoder  
directly to EXT1 or EXT2 with a eurocable.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect two VCRs or VCR and DVD recorder  
EN  
Note: you can not record signals from equipment connected to the YPbPr input.  
With eurocables  
EXT2  
EXT1  
1. Connect the aerial cables 1 and 2 as  
shown.  
EXT  
1/2  
2. Connect yourVCRs or DVD-recorder to  
EXT1 and 2 with the eurocables 4 and 5.  
3. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33, and link it to EXT1 or 2.  
CABLE  
o
o
o
D
OUT A
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUo  
R
With aerial cables only  
3
4
1
1. Connect the aerial cables 1, 2 and 3 as  
shown.  
5
2
2. Tune in your recorder’s testsignal and store the  
testsignal under programme number 0.  
See Analogue: manual installation, p. 30.  
See also the handbook of your recorder.  
RECORDER  
RECORDER  
Connect a satellite receiver  
With a eurocable  
EXT2  
EXT1  
EXT  
1 / 2  
1. Connect the aerial cables 1 and 2 as  
shown.  
2. Connect your satellite receiver to EXT1 and 2  
with a eurocable 3.  
3. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33, and link it to EXT1 or 2.  
1
o
o
o
DIGITAL  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o  
R
OUT AUDIO  
3
2
With ComponentVideo connectors  
See Connect a DVD player, a satellite receiver  
or a cable box, p. 50.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect a DVD player, Cable box or game console  
EN  
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.  
With a HDMI connector  
HDMI 1/2  
HDMI is the leading new standard for Digital video  
and audio interconnection.  
o
o
o
o
o
DIGITAL  
HDMI 1  
HDMI 2  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o  
R
OUT AUDIO  
1. Connect your equipment with the HDMI  
connector.  
2. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33, and link it to HDMI1 or 2.  
HDMI  
Note: in case of any problems, see Annex 5:  
Issues referring to connected peripherals with a  
HDMI connector, p. 64.  
Connect a DVD player or Cable box  
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.  
With a DVI connector  
Y
Pb  
Pr  
G
B
H
R
V
Note: only a DVD player with DVI with digital  
sound can be connected to the HDMI  
connector.  
AUDIO L/R  
EXT3  
EXT2  
EXT1  
1. Connect the DVI to HDMI cable to one of the  
HDMI connectors of your TV 1.  
2. Connect the audio cable 2 to the DIGITAL  
AUDIO IN connector of the TV.  
3. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33 and link it HDMI 1 or 2.  
o
o
o
o
o
DIGITAL  
HDMI 1  
HDMI 2  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT  
o
R
OUT AUDIO  
HDMI  
4. Also select Digital audio in in the same  
Connections menu.  
DIGITAL  
AUDIO  
IN  
1
2
DVI  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect a DVD player, a satellite receiver or Cable box  
EN  
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.  
With ComponentVideo Connectors  
Y
Pb  
Pr  
1. Connect the three separate component video  
cables 1 to theYPbPr jacks on the DVD  
player and to the Y, Pb and Pr jacks of EXT3  
on the TV.  
G
B
V
R
H
AUDIO L/R  
EXT3  
EXT2  
EXT1  
2. Connect the audio cable 2 to the digital out  
of the equipment and to the DIGITAL  
AUDIO IN connector of the TV.  
EXT3 :  
YPbPr  
EXT3 :  
AUDIO L/R  
3. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33 and link it to EXT3. Also select Digital  
audio in in the same Connections menu.  
4. In case of a DVD player with analogue audio,  
connect the audio cable to the DVD’s audio L  
and R jacks and to the L/R AUDIO jack of  
EXT3 3.  
1
o
o
DIGITAL  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o R  
OUT AUDIO  
DIGITAL  
AUDIO  
IN  
5. In case of a cable box and/or a satellite  
receiver also connect the cable TV cable and/or  
the satellite antenna cable 4 and the aerial  
cable 5.  
Notes:  
- cables are often colour coded. Connect red to  
DVD  
red, white to white, etc..;  
- the labels for the component video sockets may  
differ depending on the DVD player connected.  
Although the abbreviations may vary, the letters  
B and R stand for the blue and red component  
signals, respectively, and Y indicates the  
luminance signal. Refer to the DVD player’s  
instructions for use for definitions and  
connection details;  
Y
Pb  
Pr  
G
B
V
R
H
AUDIO L/R  
EXT3  
EXT2  
EXT1  
EXT3 :  
YPbPr  
EXT3 :  
AUDIO L/R  
- to get an optimal viewing, it is advised to switch  
your equipment to the highest possible  
supported display modes.  
CABLE  
1
o
o
o
DIGITAL  
ANTENNA  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o  
R
OUT AUDIO  
Warning: in case you notice scrolling images,  
wrong colours or no colour, no picture, or even  
combinations of these on your screen, verify if  
the connections are done in the correct way and  
if the resolution and the signal standard of the  
connected equipment are set in the right way.  
See the handbook for your equipment.  
DIGITAL  
AUDIO  
IN  
5
4
SAT / STB  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect a PC  
EN  
Notes:  
- only a PC with digital sound can be connected to the HDMI connection;  
- if your PC does not have digital sound output, connect your PC via aVGA connector;  
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of  
60 Hz;  
- supported PC monitor modes:  
VGA 640 x 480  
SVGA 800 x 600  
XGA 1024 x 768  
Y
Pb  
Pr  
PC equipped with a DVI connector:  
G
B
V
R
H
AUDIO L/R  
1. Use a DVI to HDMI cable to connect to one of  
the HDMI connectors of your TV 1.  
2. Connect the audio cable 2 to the DIGITAL  
AUDIO IN connector of the TV.  
EXT3  
EXT2  
EXT1  
3. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33, and link it to HDMI 1 or 2.  
4. Also select Digital audio in in the same  
Connections menu.  
o
o
o
o
o
DIGITAL  
HDMI 1  
HDMI 2  
ANTENNA  
75  
DIGITAL AUDIO IN  
L
o
AUDIO OUT  
o
R
OUT AUDIO  
HDMI  
DIGITAL  
AUDIO  
IN  
DVI  
Y
Pb  
Pr  
G
AUDIO L/R  
B
V
R
PC equipped with aVGA connector:  
H
1. Use aVGA to RGB H/V cable 1 to connect  
to the RGB H/V connectors of your TV.  
2. Connect the audio cable 2 to the AUDIO R  
(right) and L (left) inputs of the TV.  
EXT3  
EXT2  
EXT1  
EXT3 :  
RGB H/V  
3. Select the equipment you have connected in  
the Installation menu, Select your connections,  
p. 33.  
EXT3 :  
AUDIO L/R  
VGA  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect a Home Cinema amplifier  
EN  
Y
Pb  
Pr  
Digital Home Cinema amplifier  
G
B
V
R
H
AUDIO L/R  
<
Connect a digital Home Cinema amplifier to  
the DIGITAL AUDIO OUT connector 1 at  
the bottom of the TV.  
EXT3  
EXT2  
EXT1  
Tip: to avoid visible delay between picture  
and sound, use this DIGITAL AUDIO OUT  
connector to connect your Home Cinema  
amplifier.  
o
o
DIGITAL  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o R  
OUT AUDIO  
1
DIGI  
AU  
O
Y
Pb  
Pr  
Analogue Home Cinema amplifier  
G
B
V
R
H
AUDIO L/R  
<
According to the type of connector cables and  
the connector input available on your Home  
Cinema amplifier, connect your receiver to the  
AUDIO OUT L and R connectors 3 or to  
EXT1 or 2 2 at the bottom or the rear of  
the TV.  
EXT3  
EXT2  
EXT1  
EXT  
1 / 2  
L
o
AUDIO OUT o R  
o
o
DIGITAL  
DIGITAL AUDIO IN  
L
o
AUDIO OUT o  
R
OUT AUDIO  
1
AUDIO  
OUT  
2
AUDIO  
OUT  
3
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use the Common Interface slot  
EN  
Warning: switch off your TV before any module is inserted in the Common Interface slot.  
Note: this functionality is only available in certain countries.  
To receive scrambled DTV signals you will need a  
COMMON INTERFACE  
CA (Conditional Access) module and a Smart card  
provided by the service provider.  
o
o
COMMON INTERFACE  
HDMI 1  
HDMI 2  
A CA module can enable additional services, for  
example Pay TV.  
Contact your Common Interface service provider  
to get more information about these modules.  
Although CA module types may vary dependent  
on the manufacturer, each one of the CA modules  
supports a certain kind of encryption system.Your  
TV supports CA modules to work with the DVB-T  
standard.  
COMMON INTERFACE  
o
o
Note that a smart card may only be valid for a  
single broadcast channel.  
CA modules and smart cards are neither supplied  
nor optional accessories from Philips.  
The CA module is responsible for the messages  
and texts on screen. In case of failure or strange  
behaviour, you must call your CI service  
broadcaster.  
Insert a CA module  
<
Insert the specified Conditional Access module  
into the Common Interface slot as far as it will  
go. It may take a few minutes before the CA  
module is activated and service information is  
downloaded.  
Warning: when you connect the CA module  
incorrectly, it may damage the card and the TV.  
After inserting a card, leave it in the slot  
permanently. Do not remove it from the slot  
unless asked to do so. For example, your card  
has to be in the slot when your CI service  
broadcaster wants to download new information  
to the smart card. Once the CA module is  
removed, your TV will no longer decrypt  
scrambled digital DVB-T channels.  
To access common interface applications, see TV  
menu,Adjust feature menu settings, Common  
Interface, p. 26.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Select connected equipment  
EN  
Before operating your connected equipment you have to make  
a selection in the Installation, Select your connections menu,  
p. 33.  
a
1. Press the MENU/BROWSE key.  
2. Select TV menu and press the cursor right.  
3. Select Installation.  
4. Press the cursor right.  
5. Select Connections.  
6. Press the cursor right.  
7. Select the input to which the peripheral equipment is  
connected.  
8. Press the cursor right again to enter the list of types of  
peripherals connected to the selected input  
9. Select the peripheral equipment with the cursor up/down.  
Record with your recorder  
Note: to record digital programmes to an analogue recorder, the TV needs to be switched on and  
tuned to that digital programmes.  
Record aTV programme  
You can record a TV programme using your recorders tuner  
without affecting your TV.  
1. Select the channel number on your recorder.  
2. Set your recorder to record.  
See the handbook for your recorder.  
Note: when recording analogue progammes, switching  
channel numbers on your TV does not disturb recording !  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio- and video equipment keys  
EN  
Most of the audio and video equipment from our range of  
products can be operated with the remote control of your TV.  
Press one of the keys after you pressed one of the mode keys  
(DVD, STB, VCR, AUX) according to the equipment you want to  
operate with this remote control.  
See Use of the Remote control, p. 5-6.  
B
®
to switch to standby  
for record,  
Ò
for rewind (VCR, CD);  
search down (DVD)  
for stop,  
a
π
for play, for pause  
for fast forward (VCR, CD);  
search up (DVD)  
i
to display information  
to switch the menu on or off  
for chapter, channel, track selection  
digit entry,  
MENU/BROWSE  
- P +  
0 to 9  
cursor up/down  
to select the next or the previous disc  
(CD)  
cursor left/right  
to select the previous or following  
track (CD)  
0
b
to select a DVD title/chapter;  
index (AUX)  
to select your choice of  
subtitle language (DVD)  
Normal mode: if no action is being undertaken within 30  
seconds, the remote control returns to TV mode.  
Expert mode: in Expert mode the remote will stay in the  
selected mode even when the 30 seconds time-out is elapsed.  
v
To select between Normal and Expert mode  
1. Select TV mode with the TV key.  
2. Press the OK key simultaneously with the ¬ key for four  
seconds.  
>
When the B key is On for one second, the Expert mode  
is selected and the remote control will remain in the  
mode selected.  
3. Select the desired mode (DVD, STB, VCR, AUX)  
4. To go back to the TV mode, select TV and repeat steps  
1 to 3.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
Troubleshooting  
Symptom  
No picture  
Possible cause/Remedy  
< Verify if the supplied cables are connected properly. (The aerial cable to the  
TV, the other aerial to your recorder, the power cables, ..)  
< Verify if you selected the correct source.  
< Verify if the child lock has been switched off.  
Poor picture  
< Verify in the Manual installation menu if you have selected the correct TV  
system.  
< Verify if your TV or house aerial isn't located too close to loudspeakers,  
non-earthed audio equipment or neon lights, etc.  
< Mountains or high buildings can cause double pictures or ghost images.  
Sometimes you can improve the picture quality by changing the direction of  
the aerial.  
< Is the picture or teletext unrecognisable or do you experience bad teletext  
reception ?Verify if you have entered the correct frequency, or fine tune the  
frequency for that specific channel or adjust the antenna direction if the problem  
isn’t solved by finetuning. See Installation,Analogue: manual installation, p. 30.  
Poor colour  
No sound  
< Select Factory settings in the Installation menu.  
< Verify the connections between the optional equipment and the TV.  
< Verify if the volume isn't at minimum.  
< Verify if the sound hasn't been muted with the ¬ key.  
Verify the connections between the optional equipment and the TV.  
No digital channels < Contact your dealer about DigitalVideo Broadcasting Terrestrial signal availability in  
your country.  
No subtitles  
(UK ONLY)  
< Under certain circumstances Digital text or interactive services may have priority  
over subtitles.This can result in the subtitles not automatically reappearing when  
leaving Digital text or interactive services on a channel which is broadcasting  
subtitles. In these cases subtitles can be initialised, either by toggling the OPTION  
or the MENU key on the remote control or by changing channel.  
The remote does  
not function  
< Verify if the remote is set correctly for the equipment your are using.  
< Verify if the batteries are not dead. Replace the batteries.  
You can still use the keys at the left side of the TV.  
< Select TV mode on your remote control.  
< When pressing a key and some key leds are blinking with a higher speed and lower  
intensity than in a normal working condition, and your TV does not react on the  
key press, remove the batteries out of the remote control and put them back again.  
The remote of  
connected equip-  
ment does not  
function well  
< The infrared signals of the screen may influence the reception sensibility  
of other peripherals.  
Solution: replace the batteries of the remote of other peripheral  
equipment.  
No photo or music < Verify if the source complies with a supported code.  
play or in poor  
quality  
No stable or not  
synchronisedVGA  
picture  
< Verify if you have selected the correctVGA mode in your PC.  
See Connect a PC, p. 51.  
< Verify the connections between the TV and the PC.  
No solution found  
for your picture or  
sound problem  
< Switch off your TV off and then on again once.  
Never attempt to repair a defective TV yourself.  
Verify with your dealer or call a TV technician.  
Red blinking led  
< Unplug the mains cord for 10 seconds and insert it in again.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Annex 1:To set the remote control to work a Philips DVD or DVD/R  
EN  
Your TV remote control gives you the opportunity to control  
your Philips DVD or DVD/R.  
1. Press the DVD mode key for 4 seconds until the LED lights  
up constantly  
2. Enter the code 500 with the digit keys for a Philips DVD  
player.  
Enter the code 542 with the digit keys for a Philips DVD  
recorder.  
>
All mode LEDs will blink fast for 3 seconds as a  
confirmation you entered the correct code.  
If you entered a wrong code all mode LEDs will stay on  
for 2 seconds. Redo Step 2.  
>
Your remote control is in the DVD or DVD/R mode.  
To cancel the selected mode  
Press the DVD mode key for 4 seconds.  
The remote control will return to TV mode.  
<
>
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Annex 2 - Philips TV software upgrade with portable memory  
EN  
Introduction  
Philips offers software upgrade capability for your TV using  
portable memory.After you have completed a software  
upgrade, your TV will typically perform better.  
What improvements are made depends on the upgrade  
software you are using as well as the software your TV  
contained before the upgrade.  
You can execute the software upgrade procedure yourself.  
Be aware that the content of this document is addressing  
technical or software skilled users.  
To prepare a portable memory for software upgrade  
For the procedure you will require:  
- a personal computer with web browsing capability;  
- an archive utility that supports the ZIP-format (e.g.WinZip for  
Windows or Stuffit for Mac OS);  
- a preferably empty USB memory stick.  
Note: only FAT/DOS-formatted portable memory is  
supported.  
New software can be obtained from your dealer or can be  
1. Go to www.philips.com/support using the web browser  
on your PC.  
2. Follow the procedure to find the information and the  
software related to your TV.  
3. Select the latest software upgrade file and download it to  
your PC.  
4. Decompress the ZIP-file and copy the file “autorun.upg” to  
the root directory of the USB portable memory.  
Note: only use software upgrades that can be found on the  
TV menu  
Installation  
Software upgrade  
Current softw. info  
Local upgrades  
Announcement  
.............  
To verify the version of theTV software  
Time zone  
Before you start the software upgrade procedure, it is advised  
to check what the current TV software is.  
Channels  
Preferences  
Connections  
Decoder  
1. Select Software Upgrade in the TV menu, Installation,  
Software upgrade.  
2. Press the cursor right.  
Factory settings  
Software upgrade  
>
The Software Upgrade menu moves to the left panel.  
3. Select Current Software Info to observe the version and  
the description of the current software.  
Info  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Annex 2 (Continued)  
EN  
Automatic software upgrade procedure  
1. Switch off your TV and remove all memory devices.  
2. Insert the USB portable memory that contains the  
downloaded software upgrade.  
3. Switch on your TV with the power key B at the side of the  
TV.  
Software Upgrade Application  
Upgrade busy...  
Software Id: TL32E-234  
Loading  
4. At startup the TV will scan the USB portable memory until  
it finds the update content.The TV will automatically go to  
the upgrade mode.After a few seconds it will display the  
status of the upgrade procedure.  
Done  
Done  
Validating  
Programming  
Warning:  
- you are not allowed to remove the USB portable  
memory during the software upgrade procedure;  
- in case of a power drop during the upgrade procedure,  
don’t remove the USB portable memory from the TV.  
The TV will continue the upgrade as soon as the power  
comes back;  
- if you try to upgrade to a software version lower than  
the current version, a confirmation will be asked.  
Downgrading to older software should only be done in  
case of real necessity;  
- if an error occurs during the upgrade you should retry  
the procedure or contact your dealer;  
- the automatic software upgrade procedure will only start  
if the version on the USB portable memory is different  
from the one in the TV.  
5. When the software upgrade was successful, remove the USB  
portable memory and restart your TV with the power  
switch B at the side of the TV.  
Your TV will start up with the new software.  
Note: once the upgrade is finished use your PC to  
remove the TV software from your USB portable memory.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Annex 2 (Continued)  
Manual software upgrade procedure  
TV menu  
For a manual software upgrade copy the “autorun.upg” file  
in a directory called “Upgrades” located in the root of the  
USB portable memory.You can rename the file if you like  
but keep the .upg extension.  
Installation  
Software upgrade  
Current softw. info  
Local upgrades  
Announcement  
.............  
Time zone  
Channels  
Preferences  
Connections  
Decoder  
1. Insert the portable memory that contains the downloaded  
software upgrade.  
2. Select Software Upgrade in the Installation menu. Go to  
Local upgrades.  
Factory settings  
Software upgrade  
The TV will list all compatible software available on the USB  
portable memory and display the data for each selected  
upgrade version.  
Info  
3. Select the correct upgrade version and press the red colour  
key to start the upgrade.  
Your TV will restart and will automatically go to the upgrade  
mode.After a few seconds it will display the status of the  
upgrade procedure.  
Warning: if you try to upgrade to a software version  
equal or lower than the current version, a confirmation  
will be asked. Downgrading to older software should only  
be done in case of real necessity.  
4. When the software upgrade was successful, remove the USB  
portable memory and restart your TV with the power  
switch B at the side of the TV.Your TV will start up with  
the new software.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Annex 3 - Philips TV-Slideshow Format with background music  
EN  
Notes:  
- the latest version of this document can be found on the Philips support website  
(www.philips.com/support).  
Use the type number of your TV to find this documentation and other related files.  
- Philips can’t be held responsible for any problems that may occur as a result of the content in this  
document. Errors reported to Philips will be adapted and published on the Philips support website  
as soon as possible.  
Introduction  
This document explains how to make a Philips slideshow file with background audio.  
Be aware that the content of this document is addressing technical or software skilled users.  
To start the slideshow open the slideshow file in the Multimedia browser of your TV.  
1. Press the MENU/BROWSE key on the remote control after having inserted a USB device and  
switched on the TV.  
2. Go to where you stored the slideshow file (.alb) on your portable memory.  
3. Select the slideshow file and press the OK key to start the slide show.  
4. To stop a slide show, press the key.  
General Rules  
- The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow  
files using simple tools.  
- All references to network content must be based on the global address of the content.  
- Content on a Portable Memory (PM) doesn't have a global address; as a result content from a PM  
can never be referenced from a slideshow not stored on the PM itself.  
- To maintain portability, a slideshow stored on a PM should ONLY reference content on the same  
PM. Referencing global addresses can result in inconsistencies if the PM is used on a non-  
networked CE device. The latter is however not forbidden, it is only a recommendation.  
- It is preferable that URL’s referencing PM content are based on a relative path starting from the  
directory where the slideshow is stored. This path includes the device or drive name of the PM.  
An absolute path to content will also be supported.  
- relative path: pictures\test1.jpg, tamper.jpg, ..\new\bird.jpg, …  
- absolute path: USB1:\pictures1\foo_bar.jpg, C:\f1.jpg, \organization.jpg, …  
General Format  
The format and syntax below will be used to create the slideshow file (simple ascii text) with the  
extension .alb (.ALB). Examples: slshow1.alb, summer_holiday_2004.ALB, test.alb, …  
The following syntax should be used to create the text file:  
<?xml version="1.0" encoding="ISO-885h9-1" ?>  
<philips-slideshow version="1.0" >  
<title>Title of the slideshow</title>  
<audio>audio_url</audio>  
<slide-duration>30</slide-duration>  
<slides>  
<slide>slide_1_url</slide>  
<slide>slide_2_url</slide>  
<slide>slide_3_url</slide>  
<slide>slide_4_url</slide>  
<slide>slide_5_url</slide>  
<slide>slide_6_url</slide>  
...  
<slide>slide_N-1_url</slide>  
<slide>slide_N_url</slide>  
</slides>  
</philips-slideshow>  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EN  
Annex 3 (Continued)  
Supported XML-tags  
The following table gives a description of the XML syntax.  
Tag Name  
Use  
Description  
philips-slideshow  
title  
mandatory  
optional  
Philips slideshow signature including the version.  
The title of the playlist.  
audio  
optional  
The audio-URL following this tag will define the music playing  
in the background during the slideshow.  
A single song or playlist (.m3u & .pls) are the only valid audio  
references. Other reference will not result in any audio  
playback. If a single song is referenced the song will be  
repeated forever. If a playlist is referenced the playlist will be  
played in sequence with a repeat at the end of the playlist.  
optional  
The default display time (in 0,1 second) of a slide. The TV  
application isn’t obliged to support this tag. The TV application  
can force the use of one or multiple predefined display times.  
slide-duration  
mandatory  
optional  
Identifies the slides to show.  
slides  
slide  
Identifies the URL of the individual slide.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Annex 4 - Philips TV - Digital camera and USB issues  
EN  
Notes:  
- the latest version of this document can be found on the Philips support website  
(www.philips.com/support);  
- the software of your TV is upgradeable. If you have problems first check if you have the latest  
software installed on your TV. The latest software, together with instructions, can be found on the  
Philips support website. Use the type number of your TV to find this documentation and other  
related files.  
- Philips can’t be held responsible neither for any errors in the content of this document nor for any  
problems as a result of the content in this document. Errors reported to Philips will be adapted  
and published on the Philips support website as soon as possible.  
Digital Camera Issues  
If a USB connection between your digital camera and the TV isn’t working, you can try the  
solutions below to resolve your problem.  
- Make sure your digital camera is switched on and verify if the configuration of your digital camera  
is correct (see the manual of your digital camera for more information).  
- Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface  
is switched on before connecting to the TV.  
- If you have a digital camera with only internal memory (no removable memory) you can try to  
copy the content manually to a USB memory device using a personal computer.  
- Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link”  
and USB Mass Storage. Make sure that you select USB Mass Storage or “PC Drive” on your  
digital camera.  
- If your camera supports different interface settings be sure to try them one by one or contact  
the reseller of your camera to find out the correct setting.  
USB Memory Device Issues  
- Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your  
device (digital camera. MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it  
will not be detected by the content browser of the TV.  
- The following subsets of the Mass Storage Class specification are supported:  
The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class  
Specification Overview” (v1.2, June 23, 2003) including all documents referenced by the  
document. The document can be found on the USB standardisation website (www.usb.org).  
Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h).  
Full support of SubClass Code = 05h; SFF-8070i spec.  
Full support of SubClass Code = 06h; SCSI transparent command set.  
- For large USB memory devices, when you are in the Content Browser, it may take a long time  
before you can access your files.  
- When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is  
advised to use the external power supply of the portable harddisk to guarantee proper working  
under all conditions.  
Digital Content Issues  
• Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting  
can result in unreadable content. If such problems appear try to re-format the card. Be aware that  
formatting the card will also delete all the content on it (pictures, music, …).  
• The maximum size of any multimedia file should never exceed 4Gbyte.  
• Do not use a dot “.in folder naming.  
• If video streams are supporting multiple audio tracks the first audio track will automatically be  
selected, the other audio tracks can’t be selected.  
• External subtitle files (e.g. DivX.srt subtitle files) are not supported.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Annex 5 - Issues referring to connected peripherals with a HDMI connector  
Note: teletext will not be available via equipment connected to a HDMI connector.  
The HDMI IN connector allows the following TV and monitor display modes:  
EN  
HD Standard Definition TV (SDTV)  
Enhanced Definition TV (EDTV)  
High Definition TV (HDTV)  
640x480i  
720x480i  
720x576i  
640x480p  
720x480p  
720x576p  
1920x1080i  
1280x720p  
PC VGA  
SVGA  
640x480  
800x600  
1024x768  
XGA  
-
-
If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.  
Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from  
a peripheral equipment connected to the HDMI input, the Digital audio output signal is muted.  
Your TV supports HDCP (High-bandwidth Digital Content Protection).This is a system for  
protecting DVD content outputted via HDMI from being copied. It provides a secure digital link  
between a video source (DVD, PC, etc.) and your TV. Content is encrypted at the source  
peripheral equipment to prevent unauthorised copies from being made.  
-
-
-
Proper working is only guaranteed with HDMI compliant consumer products.  
Digital peripheral equipments from different manufacturers have the possibility of differing output  
standards which may cause difficulties for the television to properly display.  
In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then  
on again.  
-
To get an optimal viewing, it is advised to switch your DVD player, Blu-Ray of HD settop box to the  
highest possible supported display modes.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
EN  
active control ........................... 17 fine tune..................................... 30 safety warnings........................... 2  
ambilight .................................... 20 first time installation ................. 9 satellite receiver ...................... 48  
analogue: manual installation. 30  
antenna......................................... 4 game...................................... 45,49 select your connections......... 33  
audio receiver .......................... 52  
select connected equipment. 54  
search for channels................. 27  
audio equipment keys............. 55 HDMI connector..................... 49 set code..................................... 25  
auto format............................... 17 headphone................................. 45 settings assistant...................... 10  
automatic installation.............. 28 headphone volume.................. 19 side connectors ....................... 45  
avl (audio volume leveller)..... 19 hearing impaired................. 23,27 sharpness................................... 15  
home cinema amplifier........... 52 sleeptimer ................................. 24  
balance....................................... 18 hue.............................................. 15 slideshow format..................... 61  
batteries ................................ 4, 66 hypertext................................... 42 software upgrade ............... 34,58  
brightness.................................. 15  
sound adjustment menu......... 18  
installation menu...................... 27 standby key.................................. 5  
store channels.......................... 28  
camera ....................................... 45  
camcorder................................. 45 language preferences............... 27 subtitles...................................... 23  
care of the screen ..................... 2 light sensor ............................... 17 surround mode........................ 19  
change code ............................ 25 location...................................... 32 switch the TV on........................ 8  
channel list........................... 11,35  
child lock................................... 24 manual installation................... 30 teletext ...................................... 41  
clock ............................................. 7 menu key................................... 11 teletext menu........................... 42  
colour......................................... 15 MPEG reduction ...................... 17 teletext 2.5................................ 32  
colour enhancement............... 17 multimedia browser................ 38 time zone selection................. 28  
colour keys.................................. 5 mute key...................................... 5 tint .............................................. 15  
common interface slot........... 26  
T.O.P. teletext pages................ 41  
comp. video connectors.....48,50 navigate through the menus.. 11 troubleshooting........................ 56  
connections............................... 44  
contrast ..................................... 15 on screen language.................... 9  
tv menu settings ...................... 13  
country selection..................... 28 on screen information.............. 6 uninstall...................................... 31  
cursor keys.................................. 5 on timer..................................... 25 usb connector.......................... 45  
custom colour.......................... 22 option key ................................... 7 usb device.................................. 38  
custom tint................................ 16 OK key......................................... 5  
video equipment keys............. 55  
decoder...................................... 33 PC............................................... 51 volume...........................................5  
delta volume............................. 19 picture adjustment menu....... 15 VCR............................................ 47  
demo .......................................... 26 picture format.......................... 17  
digital audio language.............. 18 PIN code ................................... 25  
digital natural motion ............. 16 pixel plus.................................... 16  
digital subtitle language .......... 23 preferences menu.................... 32  
digital teletext .......................... 43 preferred audio language ....... 27  
digital: test reception .............. 29 preferred subtitle language.... 27  
digital TV...................................... 8 previous channel........................ 6  
DNR........................................... 16 programme title....................... 32  
dual I/II....................................... 19  
DVB-T .......................................... 8 quick access menu..................... 7  
DVD player............................... 49  
DVD recorder.......................... 48 radio channels.......................... 28  
DVI connector.................... 49,51 rear panel overview................ 46  
dynamic contrast..................... 16 rearrange channel list ............. 31  
record a TV programme........ 54  
EPG ........................................... 36 recycling..................................... 66  
equalizer .................................... 19 reinstall ...................................... 31  
euroconnector.............. 47,48,52  
remote control........................... 5  
factory settings......................... 34 reset factory settings.............. 34  
favourite key............................. 35 rename....................................... 31  
favourite channel list............... 35 reshuffle..................................... 31  
features adjustment menu..... 23  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Recycling  
EN  
Recycling  
Disposal of batteries  
The batteries supplied do not contain the heavy  
metals mercury and cadmium. Please check on  
how to dispose of exhausted batteries according  
to local regulations.  
R The packaging of this product is intended to  
be recycled.Apply to the local authorities for  
correct disposal.  
Disposal of your old product  
Your product is designed and manufactured with  
highly quality material and components, which can  
be recycled and reused.  
When this crossed-out wheeled bin  
symbol is attached to a product, it  
means the product is covered by the  
European Directive 2002/96/EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products. Please act according to your local rules  
and do not dispose of your old products with  
your normal household waste.  
The correct disposal of your old product will help  
prevent potential negative consequences for the  
environment and human health.  
Product information  
- Your TV consumes energy in standby mode. Energy consumption contributes to air and  
water pollution.Very low standby power consumption.  
- If you need further assistance, please call the customer support service in your country.  
The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee  
booklet.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Pelco Power Supply C653M D 9 03 User Manual
Philips Cassette Player AQ6587 00S User Manual
Philips Computer Monitor VSS9451 User Manual
Philips Home Theater System MX5700D User Manual
Philips Juicer RI1865 User Manual
Philips Marine Instruments 19PFL5404 60 User Manual
Philips TV VCR Combo PV 2031414 User Manual
Power Acoustik Car Video System HD 7BG User Manual
Professional Series Beverage Dispenser PS72082 User Manual
Professional Series Iron PS74181 User Manual