Philips CD Player CDR775 777 User Manual

Audio CD Recorder

CDR775/777

Instructions for use

Mode d'emploi

•

Instrucciones de manejo

Bedienungsanleitung

Gebruiksaanwijzing

Istruzioni per l'uso

Brugsanvisning

Bruksanvisning

Käyttöohje

Manual de utilização

O‰ËÁ›Â˜ ¯Ú‹ÛÂˆ˜

Instrukcja obs¬ugi

OPEN / CLOSE

REC

PLA

AUSE

STOP

EXT

RECORD

TYPE

FINALIZE

ERASE

SOURCE

EASY JOG

STORE/

CANCEL/

DELETE

CDR

PLA

Y/PAUSE

STOP

OPEN/CLOSE

REM

REC

TIME

TRACK

TOTAL

REM

TRACK

TIME

STEP

ENTER

AUDIO CD RECORDABLE/REWRIT

ABLE

Recordable

SYNC

MANUAL

RECORD

CHANGER

DIGITAL

OPTICAL

ANALOG

PROG

A-B

ALL

SHUFFLE

REPEAT

SCAN

TRACK

AUDIO CD PLA

YBACK

CDR77X AUDIO CD RECORDER

ON / OFF

PROG

SHUFFLE

PHONES

DISPLA

SCROLL

REPEA

DJ MODE

IR SENSOR

DOUBLE SPEED

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

English ....................................................5

Français.................................................33

Español .................................................61

Deutsch.................................................89

Nederlands .........................................117

Italiano................................................145

Svenska...............................................173

Dansk..................................................201

Suomi..................................................229

Português............................................257

ŒÏÏËÓÈÎ¿ .........................................285

Polski...................................................313

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

Table of contents

GENERAL INFORMATION AND DISCS

Welcome ......................................................................6

About this manual........................................................6

Technical data ..............................................................6

Discs for recording.......................................................7

Discs for playback........................................................7

Maintenance ................................................................7

Accessories .................................................................7

CONTROLS AND CONNECTIONS

Controls on the front....................................................8

Connections at the back ..............................................9

DISPLAY

DISPLAY indications.....................................................9

DISPLAY messages ....................................................10

MENU messages........................................................11

INSTALLATION

Connections general ..................................................11

Analog connections CD recorder & CD player ..........12

Analog connections CD player deck..........................12

Digital coaxial connections CD recorder ...................13

Digital optical connections CD recorder....................13

Power supply..............................................................14

Setup recommendations............................................14

Inserting batteries in the remote control ..................14

REMOTE CONTROL

Remote control commands ........................................15

Inserting discs............................................................15

RECORDING

Remarks about recording...........................................16

Recording modes........................................................16

High speed recording from internal CD player..........17

Listen mode recording from internal CD player ........18

Manual recording from external CD player...............19

Autostart recording from external

CD player - CD-SYNC.................................................20

Finalizing CDR & CDRW discs ...................................21

Unfinalizing CDRW discs ...........................................21

Erasing CDRW discs ..................................................22

PLAYING

Play a 2-disc changer (Changer mode) ......................23

Playing CDs on Deck 1 and/or Deck 2 (DJ mode) .....23

Selecting a track ........................................................24

Search ........................................................................24

Shuffle (random order) play.......................................25

Repeat CD, track or program .....................................25

PROGRAMMING

Remarks about programming.....................................26

MENU MODE/CD TEXT INPUT

Remarks about Menu mode.......................................27

General operation of Menu .......................................27

A.Text input................................................................28

B. Erasing text ............................................................28

C. Reviewing CD Text memory...................................29

D.Auto track increment..............................................30

E. Balance...................................................................30

FIXING PROBLEMS

Troubleshooting..........................................................31

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL INFORMATION

Welcome !

Thank you for buying this Philips Compact Disc Recorder /

Player Double Deck.

In the eighties Philips invented a new audio system - the CD.

The CD (compact disc) revealed to you the new dimensions of

digital sounds and added to the pleasures of audio.

Compact disc technology permits a high contrast in loud as

well as in quiet passages, with perfect channel separation.

Philips has now further developed compact disc technology

and the result is the CD recorder.

With your Philips CD recorder/player, you can make your own

high-quality audio CDs (subject only to legal restrictions on

copying), either by recording at normal or high speed from the

Player to the Recorder, or by recording from an external

source. And naturally, you can also play all pre-recorded audio

CDs, using one or both decks individually, or together as a 2-

deck changer.

Note: In certain countries including the UK and certain

Commonwealth countries, use of the product (or CD

Recorder) as shown or suggested in this user manual

may require the permission of copyright holders.

Technical data

About this manual

This manual gives instructions for operating this CD recorder

where:

Subject to modification without notice.

- the figures (1) throughout the text indicate a sequence of

actions necessary to perform a certain operation;

- the arrows (➜) indicate the reaction from the recorder;

- the dots (•) indicate remarks, advice or special options

within a sequence of actions. The dot-marked instructions

are not necessary for the required operation.

General

Power consumption ..........................................................20 W

Power consumption in Standby ..........................................6 W

Operating temperature ..................................................5-35° C

Weight ..............................................................................4.5 kg

Dimensions ..................................................435 x 310 x 88 mm

Audio

Frequency response..............................................2Hz-22050 Hz

Playback S/N (A-weighted) ............................................100 dB

Playback S/N.................................................................. 100 dB

Playback dynamic range CDR ..............................95 dB (90 dB)

Playback dynamic range CD..............................................90 dB

Playback total harmonic distortion CDR........88 dB = 0.0033 %

Playback total harmonic distortion CD..........85 dB = 0.0056 %

Channel separation ........................................................100 dB

Recording S/N (A-weighted) ............................................98 dB

Recording S/N digital without SRC ..................equal to source

Recording dynamic range..................................................92 dB

Recording total harmonic distortion + noise..............................

........................................................................85 dB (0.0056%)

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL INFORMATION AND DISCS

Discs for recording

Maintenance

For recording use, special audio discs must be used (for music

only). These Discs bear the logos as shown below. The text

‘DIGITAL AUDIO’ is present!

For recording it is very important to use dust and scratch free

discs.

To clean a CD, wipe it in a straight

line from the center toward the edge

using a soft, lint-free cloth. A

cleaning agent may damage the

disc! Write only on the printed side

of a CDR or CDRW, and only with a

soft felt-tipped pen.

Your recorder uses two types of discs for recording purposes:

- CD-Audio Recordable (CDR) discs:

fully recorded and finalized, these discs

play on all CD players and recorders.

Recordable

- CD-Audio ReWritable (CDRW) discs:

can be recorded, erased and re-recorded

hunderds of times. When finalized, they

Clean the CD recorder with

a soft, slightly dampened lint-free

cloth. Do not use any cleaning

agents as they may have a corrosive

effect.

ReWritable

play on CDRW compatible CD

players and recorders. In the course of

1999 most Philips CD players and recorders will be CDRW

compatible.

Important:

To ensure proper working of the set we recommend the use of

Philips audio CDR and audio CDRW discs only.

Do not expose the CD recorder,

batteries or CDs to humidity, rain,

sand or excessive heat (caused by

OPEN

STOP

AUDIO CD RECORDABLE/REWRIT

ABLE

heating equipment or direct

sunlight).

Discs for playback

Your CD recorder is able to play:

Always keep the tray closed to avoid dust on the lens.

- All pre-recorded audio CDs.

- All Audio CDR and Audio CDRW.

The lenses may cloud over when the CD recorder is suddenly

moved from cold to warm surroundings. It is not possible to

play a CD then. Leave the CD recorder in a warm environment

until the moisture evaporates.

Note: CDR(W) discs recorded with a computer can only be

used when they are correctly treated according the

audio standard (IEC958: Consumer part). Single session

only!

Accessories

- 2 Analog audio cables (with red and white plugs)

- 1 Digital coaxial cable (with black plugs)

- Power cord

- 2 Batteries

- Remote control

- Guarantee

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS AND CONNECTIONS

10 11 12

14 15 16 17 18 19 20 21 22

OPEN / CLOSE

REC

PLAY

AUSE

STOP

TYPE

RECORD

EXT

FINALIZE

ERASE

SOURCE

EASY JOG

CDR

STORE/

CANCEL/

DELETE

REM

REC

TIME TRACK

TOTAL

REM TRACK

TIME

STEP

11 12

13 14

ENTER

15 16

17 18

19 20

SYNC

MANUAL

RECORD

CHANGER

AUDIO CD RECORDABLE/REWRIT

ABLE

Recordable

DIGITAL

OPTICAL

ANALOG

PROG

A-B

ALL

SHUFFLE

REPEAT

SCAN

TRACK

CDR 77X

AUDIO CD RECORDER

AUDIO CD PLA

YBACK

ON / OFF

PROG

SHUFFLE

PHONES

DISPLA

SCROLL

REPEA

DJ MODE

DOUBLE SPEED

IR SENSOR

31 30 29 28 27 26 25

CDR

OUT

DIGITAL

OUT

ANALOG

OUT

ANALOG

DIGITAL

OPTICAL

Controls on the front

CD recorder

& ¡EASY JOG ™ ........- previous/next track (Play and

(rotate)

Program mode)

- recording level control (recording)

- selects settings (menu on)

1 ON/OFF........................turns the CD recorder ON or OFF (if

the recorder is in Standby mode,

any key press will activate the CD

ENTER..........................- plays selected tracks

(push) - selects settings in Menu mode

- programs track numbers

recorder)

2 Standby indicator

3 Disc tray

* STORE/MENU ............- stores Menu settings

4 OPEN/CLOSE /..........opens/closes disc tray

5 PLAY/PAUSE 2; ......starts play/interrupts play or

recording

- enters Menu mode

( CANCEL/DELETE ......- deletes tracks from a program

- deletes text in Menu mode

6 STOP 9........................stops/clears a program

7 REC(ord) TYPE ............selects recording modes

8 RECORD ......................starts recording, finalizing, erasing

9 FINALIZE ....................selects finalize mode

0 ERASE..........................selects erasing mode (disc or track)

! EXT SOURCE ..............selects external input source

@ CDR ............................selects CD recorder deck

display/keys

- returns to a higher level in the

≤ IR sensor ....................receives signals from the remote

control

∞ PHONES......................socket for headphones

§ DJ MODE ....................separate play of CD recorder deck

and CD player deck

≥ REPEAT........................repeats play (All, program or track)

• SCROLL........................activates scrolling of text over the

display (once)

CD player

ª DISPLAY......................selects display information,

$ CD ..............................selects CD player deck

display/keys

) PLAY/PAUSE 2; ......starts play/interrupts play

¡ STOP 9........................stops/clears a program

™ OPEN/CLOSE /..........opens/closes disc tray

£ Disc tray

permanent text scrolling and time

º SHUFFLE......................plays CD(RW) or program in

random order

⁄ PROG(ram) ..................opens/closes program memory

Note: Unless stated otherwise, all controls are on the front of

the CD recorder. When provided on the remote control,

you can also use the corresponding buttons, after

selecting the CD recorder deck or CD player deck by

pressing CDR or CD.

General

# Display..........................information screen

% Q ............................- searches backward

- cursor control in Menu/Prog.

review mode

^ R ............................- searches forward

- cursor control in Menu/Prog.

review mode

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS AND CONNECTIONS

DISPLAY

Connections at the back

DISPLAY indications

1 Connection to mains

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

2 ANALOG OUT ............connects CD player deck to the

line input of an amplifier (left and

right)

10 11 12 13 14 15 16 17 18 19 20

SYNC MANUAL

RECORD

PROG

3 DIGITAL OUT CD ......connects CD player deck to the

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

digital coaxial input of e.g.

SCAN TRACK

amplifier or recording device

23 22 21 20 19 18 17 16

15 14 13 12 11

4 ANALOG IN ................connects to the line output of an

amplifier (left and right)

5 ANALOG OUT CDR & CD

1 REM/REC TIME ..........remaining time/remaining

recording time/recording time

2 TRACK ........................track number

......................................connects to the line input of an

amplifier (left and right)

6 DIGITAL IN..................connects to the digital coaxial

..............................balance (lights during balance

adjustment)

output of an external CD player

7 DIGITAL OUT CDR & CD

4 TOTAL REM

......................................connects to the digital coaxial

input of e.g. amplifier or recording

device

TRACK TIME ..............total or remaining time of disc or

track

}

................................remote control active

8 OPTICAL IN ................connects to the digital optical

6 STEP ............................indicates the number of tracks in a

output of an external CD player

program

7 Track bar ....................indicates:

- tracks on a disc or in a program

- track in play

8 + 20 ..............................disc or program contains more

than 20 tracks

9 PROG(ram) ..................flashes during programming/lights

in program mode

0 REPEAT TRACK/ALL..lights up when a track/ complete

disc (or program) is repeated

! SCAN ..........................lights up when the first 10

seconds of each track are played

@ SHUFFLE......................plays tracks in random order

# s ..............................CD player deck selected

^$c^{..............................CD inserted (a pre-recorded CD or}

finalized CDR or CDRW disc)

% fRECORDg ............lights during recording from the

internal CD

^ L/R ; ;........................record/play level bar. Indicates the

audio signal level

& j k........................DJ mode selected

* iCHANGERh ........changer mode selected

( ; ..................................pause function active

) B ................................lights during play

¡ R(W) ............................unfinalized CDR(W) disc inserted

™ 0 ................................lights during recording

£ ANALOG......................- analog input selected for

external recording

- analog recording

≤ OPTICAL I ..................optical input I selected for external

recording

∞ DIGITAL I ....................digital input I selected for external

recording

§ SYNC ..........................automatic or synchronised start of

external recording

≥ MANUAL ....................manual start of external recording

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY

XX XX FINAL................time countdown when finalizing a

disc

DISPLAY messages

PRESS RECORD............to start manual recording,

finalizing or erasing

START SOURCE............to start synchronised recording

from a source (e.g. CD player)

FINALIZED CD............when trying to record on a

finalized CDR or a prerecorded CD

UNFINALIZE/ ................when trying to record on a

Messages, as listed and explained here, may appear on the

display for your guidance.

General

READING..........................reading disc information

OPEN..................................during tray opening

CLOSE ..............................during tray closing

NO DISC..........................no disc inserted, disc unreadable

or disc inserted upside down

PROG FULL....................program full

INSERT DISC ..............insert disc or insert disc in correct

way

WRONG DISC..................inserted disc is not an audio CD

UNFINALIZED ..............unfinalized CDR(W) disc

MEMORY XXù............indicates the amount of text

memory used for unfinalized discs

PRESS ENTER

finalized CDRW

PROF SOURCE ..............when a professional source is

connected

REC TEXT ......................when reading CD text from source

disc for recording

TEXT PROTECT............when CD text of source disc is

subjected to copy protection (CD

text will not be recorded)

Play

CHANGER MODE............CD changer-mode selected

DJ-MODE..........................DJ- mode selected when recording

keys are pressed in DJ-mode

Recording

WAIT..................................- when STOP 9is pressed during

recording

PROGRAM..........................program mode selected

ALBUM TITLE ..............will be followed by album title

TRACK TITLE ..............will be followed by track title

ALBUM ARTIST............will be followed by artist name

TRACK ARTIST............will be followed by track artist

name

- when STOP 9is pressed during

recording the first 4 seconds of a

track

UPDATE ..........................updating disc contents

DISC FULL....................no more recording possible

DIGITAL 1....................digital coaxial input 1 selected

OPTICAL ........................digital optical input selected

ANALOG............................analog input selected

COPY PROTECT............no digital recording can be made

of the external source

Others

NO AUDIO TR................when the recorder enters a data

track during recording

FINALIZE CD ..............laser power calibration performed

96 times, finalize disc needed

INITIALIZING............during laser power calibration for

unfinalized discs

DISC RECOVER............during disc recovering after power

failure

NOTFINALIZED............when opening the tray with an

unfinalized disc inserted

(CD recorder)

RECORD FAST ..............high speed recording selected

REC LISTEN..................listen speed recording selected

MAKE CD..........................high speed recording of a

complete disc and Auto Finalize

function selected

REC EXT DISC ............synchronised start of recording

from external source selected

REC EXT MAN................manual start of recording from

external source selected

_XX DB............................level is being adjusted

DOES NOT FIT ............time left on CDR(W) disc is not

enough for proposed recording

ANALOG REC..................copy prohibited track found during

recording. Track will be copied

OPC ERROR....................OPC failure during OPC procedure

(OPC = Optimum Power

Calibration)

RECORD ERROR............recording error in menu mode

DISC ERROR..................when trying to record on or finalize

a recovered disc

MEMORY FULL/..............when text memory is full. To add a

FINALIZE CD

CD to the list, first finalize or

erase another disc from the list

NOT POSSIBLE............when trying to erase a CDR

analog (Copy Protection

Regulations)

ERASE TRACK ..............when erasing one or more tracks

ERASE DISC..................when erasing a disc

FINALIZE CD ..............when finalizing a disc

FINALIZED....................when trying to finalize an already

finalized disc

CHECK INPUT ..............when RECORD is pressed while no

digital source is detected

XX XX ERASE................time countdown when erasing a

track or a disc

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY

INSTALLATION

MENU messages - See Menu mode

Connections general

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

For playback on the CD recorder (and/or CD player deck) the

following outputs are present:

- Digital coaxial output (CD & CDR);

- Analog output (CD & CDR).

EASY JOG

STORE/

CANCEL/

DELETE

SYNC MANUAL

RECORD

PROG

ENTER

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

We advise you to connect these to the TAPE or CDR input on

your amplifier.

Menu messages

NO TRACKS....................when attempting to edit text for a

disc which has no tracks

TEXT EDIT....................when entering Text Edit mode

ALBUM ARTIST............when editing or erasing an artist

name

For external recording the following inputs are present:

- Digital optical input;

- Digital coaxial input;

- Analog input.

ALBUM TITLE ..............when editing or erasing a title

ARTIST TR N................when editing or erasing an artist

name per track

TITLE TR N..................when editing or erasing a title per

track

TEXT ERASE..................when entering Text Erase mode

ALL TEXT ......................when entering All Text mode

ERASE OK ......................when confirmation for erasing has

to be given with ENTER key

ERASE ALL OK ............when confirmation for erasing has

to be given with ENTER key

For playback of CD player deck separately (DJ mode) from the

CD recorder the following outputs are present:

- Digital coaxial output (CD);

- Analog output (CD).

We advise you to connect these to the CD input on your

amplifier.

The connections you make will depend upon the possibilities

your audio equipment offers. Please refer to the user manuals

for your other audio equipment first.

ERASE MEMORY............when waiting for confirmation

when erasing a disc

MEMORY VIEW ..............when selecting text review per

unfinalized disc in memory

MEMORY EMPTY............when REVIEW is selected while no

text is in memory

AUTO TRACK..................when selecting auto track

increment ON or OFF

ON ......................................auto track increment on

OFF....................................auto track increment off

SET BALANCE ..............when selecting BALANCE

NO TEXT..........................no text stored for disc

Digital recordings (optical or coaxial) give the best

performance in audio and usability (e.g. auto-track).

(The digital optical connection is less sensitive to external

disturbances).

If your equipment does not offer digital connections, the high

quality Analog-Digital-Convertor of your CD recorder will

ensure very good audio performance when recordings are

made from the analog input.

Playback via the digital coaxial output of the CD recorder

gives the best audio performance.

If your equipment does not offer digital connections, the high

quality Digital-Analog-Convertor of the CD recorder ensures a

very good sound quality via the analog output.

We advise you to always establish both digital and analog

connections. In this way you can always make analog

recordings when digital recording is not possible.

We have described the most common ways of connecting the

CD recorder. If you still have difficulties with the connections

you can always contact the Philips Consumer Service desk in

your country.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Analog connections CD recorder & CD player

Analog connections CD player deck

This connection must be made for playback on the CD

recorder deck as well as the CD player deck (cable 2).

Cable 1 is only required if you want to make recordings from

an external analog source.

This connection is only required if you want to playback on

the CD player deck seperately from the CD recorder deck. This

will be the case in DJ-mode.

Use the audio cables supplied. Connect the red plugs to the

R sockets, and the white plugs to the L sockets.

1 For separate playback on the CD player deck, connect a

third cable 3 (not supplied) between the ANALOG OUT

sockets of the CD recorder and the input sockets of an

amplifier e.g. CD, or AUX.

(Connect the red plugs to the R sockets, and the white plugs

to the L socket.)

1 For recording, connect cable 1 between the ANALOG IN-

sockets on the CD recorder and the CDR LINE- or TAPE OUT-

sockets of an amplifier.

Note: For recording directly from a CD player, the analog

input of the CD recorder should be connected to the

analog output of the CD player.

Note:

- Never use the PHONO input.

- Your CD recorder/player is equipped with a digital coaxial

output for the CD player deck. This output can be used for

digital playback.

2 For playback, connect cable 2 between the ANALOG OUT-

sockets on the CD recorder and the input sockets of an

amplifier e.g. TAPE IN, CDR or AUX.

Note: Never use the PHONO input.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Digital coaxial connections CD recorder

Digital optical connections CD recorder

This connection is only required if you want to make

recordings from an external CD player with a digital coaxial

output.

This connection is only required if you want to make

recordings from an external CD player with a digital optical

output.

Use the digital coaxial cable supplied.

1 For external recording, connect the cable 4 between the

DIGITAL IN-socket on the CD recorder and the DIGITAL OUT-

socket of an external CD player.

When connecting the Digital

Optical cable, make sure it

is fully inserted until

there is a click.

Note: Your CD recorder is equipped with a digital coaxial

output (common output for CD recorder & CD player

deck). This output can be used for digital playback.

1 Remove the dust caps from the digital optical connection.

(We recommend you save the cap.)

2 For external recording, connect a fibre-optic cable 5

between the digital optical input of the CD recorder and the

digital-optical output of an external CD player.

Note: For playback, the digital coaxial outputs or analog

outputs of the CD Player and CD recorder should be

connected to an amplifier.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Power supply

Inserting batteries in the remote control

1 Plug the power cord supplied into the MAINS connector on

the CD recorder, then into a mains socket.

2 Press ON/OFF.

➜The CD recorder will switch on.

1 Open the battery compartment cover.

Note:

2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as

shown.

- If the CD recorder is in Standby mode (red led on), press any

key to activate the recorder.

- The CD recorder will automatically adjust to the local mains

voltage.

- When the CD recorder is in the ‘OFF’ position, it is still

consuming some power. If you wish to disconnect your

player completely from the mains, withdraw the plug from

the AC outlet.

3 Replace the cover.

Note: We recommend you use 2 batteries of the same type

and condition.

Batteries contain chemical substances, so they should

be disposed of properly.

Setup recommendations

- Place the CD recorder on a solid, vibration free surface.

- Do not place the CD recorder near a source of heat or in

direct sunlight.

- Do not use the CD recorder under extremely damp

conditions.

- If the CD recorder is placed in a cabinet, make sure that a

2.5 cm space remains free on all sides of the CD recorder

for proper ventilation.

Important:

- Do not put the CD recorder on top of other equipment that

heats up the CD recorder (e.g. receiver or amplifier).

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL

Remote control commands

Inserting discs

SCAN

ABC

SHUFFLE

DEF

REPEAT

GHI

JKL

OPQ

OPEN/CLOSE

PLA

Y/P

AUSE

STOP

REC

TYPE

RST

UVW

XYZ

RECORD

FINALIZE

EXT

ERASE

SOURCE

CDR

SPACE

SCROLL

TRACK INCR.

ON/OFF

CDR

DIRECT LINE

RECORDING

DOUBLE SPEED

;

MENU/

STORE

PROG.

ENTER CANCEL

1 Press OPEN/CLOSE to open the disc tray.

➜ OPENlights up.

2 Insert a CD, CDR or CDRW in the appropriate recess in the

tray, label side up.

STANDBY ....................switches to Standby/On

SCAN ................................plays the first 10 seconds of each

track

3 Press OPEN/CLOSE to close the tray (see also Playing a CD).

➜ CLOSElights up, followed by READINGand the

display will show the type of disc you inserted.

SHUFFLE............................plays CD(RW) or program in

random order

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

REPEAT..............................repeat play

Number/alphabet keys 0 - 9

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

......................................- selects a track by number

- selects character for text input

SCAN TRACK

TRACK INCR(ement) ........increases track numbers during

recording

SPACE................................inserts a space character during

text input

SCROLL..............................activates scrolling of text over the

display

•If you insert a blank or partly-recorded CDR or unfinalized

CDRW, the CD recorder will calibrate the disc for optimum

recording. During this process the display will first show

INITIALIZINGand then the number of audio tracks.

Calibration can take up to 25 seconds.

CDR ....................................selects CD recorder deck

CD ......................................selects CD player deck

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

......................................starts CD(RW) play

O ......................................- previous track (Play and Program

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

mode)

- cursor control in Menu/Prog.

review mode

• If a CDR(W) is finalized it will show CD on the display.

P ......................................- next track (Play and Program

mode)

- cursor control in Menu/Prog.

review mode

• If CD-text is available the TITLE/ARTIST will scroll by.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

......................................stops CD(RW) and clears a

program

10 11 12 13 14 15

SYNC MANUAL

Q....................................searches backward

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

R....................................searches forward

;

......................................interrupts CD(RW) play/recording

MENU/STORE ..................- enters Menu mode

- stores Menu settings

PROG.(ram) ........................opens/closes program memory

ENTER................................- selects settings in Menu mode

- programs track numbers

- starts playback of selected track

CANCEL ............................- deletes tracks from a program

- deletes text in Menu mode

Note:

- Only Audio CDs will be accepted. If a non-audio disc is

inserted, the display shows WRONG DISC/

USE AUDIO CD.

- Reading an unfinalized disc in the CD recorder deck could

take approximately 1 minute.

- For recording it is important that the blank disc is

completely free from dust particles or scratches. (see

maintenance).

- returns to a higher level in the

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

Remarks about recording

Recording modes

You will soon discover how easy it is to make your own CDs.

Nevertheless, it is advisable to use a CDRW disc for your first

try.

Your recorder offers several recording modes.

For recording from internal CD-deck:

We will describe:

- Recording from internal CD player deck: high speed or

listen mode.

- Recording from an external CD player deck: syncronized

start with CD player or manual start. (analog or digital).

- RECORD FAST (high speed digital recording) - fast recording

of a disc or programmed tracks.

- REC LISTEN (normal speed digital recording) - listening to a

recording while making it.

- MAKE CD (high speed digital recording and auto-finalize) -

fast recording of a disc or programmed tracks. Recording

will be finalized automatically.

•If the disc is a CDRW and is already finalized you must

unfinalize it first.

•The recording procedure is the same for CDRs and

CDRWs.

Warning: No more recording possible after finalizing CDR

disc!

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

•If the disc already contains recordings, the CD recorder will

automatically search for the end of the last track, so that

recording can start from there.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

•CD text can be added to a recording in Stop mode and

during recording.

For recording from external sources:

•CD text can not be recorded from an external CD player.

(Text information is not available on the output of the CD

player.)

- REC EXT DISC (automatic start of recording) - to make an

automatic recording of an external source simply by starting

the source.

- REC EXT MAN (manual start of recording) - to start a manual

recording from an external source.

•The CD recorder deck is able to record CD text from the

internal CD player deck. (If not subjected to copy

protection.) This may take up to 2 minutes.

•There must be at least 7 seconds of recording time left on

the disc, otherwise you will not be able to enter record

standby mode. DOES NOT FITthen lights up.

Some remarks on recording:

- During high speed recording, the original recording quality

will be maintained.

- When Auto track is on (default setting), track numbers will

automatically be increased during recording.

•If the display indicates COPY PROTECT, no digital

recording can be made of the source material. Recording

will not start.

- By programming tracks first, a compilation can be recorded.

- If a finalized CD recordable disc is inserted in the CD

recorder, FINALIZED CDwill be displayed when REC

TYPE is pressed. Recording is not possible.

- If a finalized CD rewritable disc is inserted in the CD

recorder, UNFINALIZEand PRESS ENTERwill be

displayed when the REC TYPE is pressed. If ENTER is

pressed, the disc will be unfinalized.

•The Serial Copy Management System (SCMS) only

allows digital recording under specific conditions:

- This means that it is not possible to make a digital copy

from a digital copy.

- Analog recording is always possible!

- The number of recordings from the original is unlimited.

•A maximum of 99 tracks can be recorded on a disc.

Minimum allowable track length is 4 seconds.

Note: If during recording ANALOG RECappears, the track

will be recorded as analog, at normal speed. All other

tracks will be copied normally (at double speed).

•Recordings from DAT or DCC players will not always stop

automatically.

Important:

If you want to play the recorded CDR disc on any

regular CD player, it must first be finalized. See

finalizing discs.

Finalized CDRW discs play only on CDRW compatible

CD players.

For recording from CD changers always use REC EXT

DISC.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

•If DOES NOT FITappears on the display, there is not

enough recording space left on the CDR(W) disc.

You can press RECORD: only complete tracks that still fit on

the CDR(W) will recorded.

High speed recording from internal CD player

EASY JOG

STORE/

CANCEL/

DELETE

ENTER

You can press PROG to select one or more tracks for

recording (see programming):

OPEN / CLOSE

REC

PLAY

AUSE

STOP

- rotate the EASY JOG/ENTER key to the required track

number, then press the key (or ENTER on the remote

control)

RECORD

EXT

TYPE

FINALIZE

ERASE

SOURCE

CDR

ANALOG

- directly select the track number via the 10-keypad on the

remote control then press the ENTER key to confirm your

selection and go to the next step.

CDR 77X

AUDIO CD RECORDER

PROG

SHUFFLE

PHONES

DISPLA

DJ MODE

SCROLL

REPEA

Start high speed recording

During high speed recording the sound is not audible.

1 Press RECORD to start recording.

Preparing for high speed recording

➜ WAIT lights up. The display shows the total remaining

time for the selected recording. High speed recording

starts. fRECORDglights continuously.

1 Make sure that the recording disc is absolutely free of

scratches and dust particles.

2 Press REC TYPE to choose the type of recording:

•To check the track number and track time, press DISPLAY.

This can be done during recording.

once: to select ‘RECORD FAST’ if you wish to make a

fast recording of a disc or programmed tracks;

three times: to select ‘MAKE CD’ if you wish to make a

fast recording of a disc or programmed tracks

and to automatically finalize the recording.

•Recording will stop automatically.

Note: Copy prohibited tracks will be copied analog. ANALOG

RECis displayed.

➜ The display first shows the selection.

The fRECORDglabel starts blinking. After 3 seconds

the display shows the remaining CDR(W) recording time

on the left and total time of source on the right. (every 2

seconds PRESS RECORDis displayed.) The left

selection indicator is lit.

2 To stop recording manually, press STOP.

➜ UPDATElights up, fRECORDggoes out and

recording stops. (Minimal track length must be 4 seconds

otherwise silence will be added to the track.)

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

•If STOP was pressed within 3 seconds after RECORD, no

recording will take place.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

After recording, the display shows UPDATEfor several

seconds. The Total time indications can differ slightly.

However, no music information is lost.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

Note: In this Recording mode, the Pause function is not

operative.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

Important:

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

If you want to play the recorded CDR disc on any

regular CD player, it must first be finalized. See

finalizing discs.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

Finalized CDRW discs play only on CDRW compatible

CD players.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

Listen mode recording from internal CD player

- directly select the track number via the 10-keypad on the

remote control then press the ENTER key to confirm your

selection and go to the next step.

EASY JOG

STORE/

CANCEL/

DELETE

ENTER

3 Play the source first to set the optimal recording level on

the CD recorder.

OPEN / CLOSE

REC

PLAY

AUSE

STOP

RECORD

EXT

TYPE

FINALIZE

ERASE

SOURCE

CDR

4 Rotate the EASY JOG/ENTER key until, on the Record/Play

Level bar, all the blue segments are alight, but the red

segments do not light continuously during the loudest

passages.

ANALOG

CDR 77X

AUDIO CD RECORDER

➜ Display shows _XX DB(Decibel, e.g. -3DB).

PROG

SHUFFLE

PHONES

DISPLA

DJ MODE

SCROLL

REPEA

5 Stop the source.

During Listen mode recording you listen to the recording

while you are making it.

Start Listen mode recording

1 To start recording, press RECORD.

Preparing for Listen mode recording

➜ WAITlights up. fRECORDglights continuously and

the selected track or program is copied at normal speed.

The track number and the recording time left will appear.

1 Make sure that the recording disc is absolutely free of

scratches and dust particles.

2 For recording, press REC TYPE twice:

•To check the track time, press DISPLAY. This can be done

during recording.

➜ The display first shows the selection.

The fRECORDglabel starts blinking. After 3 seconds

the display shows the remaining CDR(W) recording time

on the left and total time of source on the right. (every 2

seconds PRESS RECORDis displayed) The left

selection indicator is lit.

•Recording will stop automatically.

Note: Copy prohibited tracks will be copied analog. ANALOG

RECis displayed.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

2 To stop recording, press STOP.

➜ UPDATElights up, fRECORDggoes out and

recording stops. (Minimal track length must be 4 seconds

otherwise silence will be added to the track.)

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

•If STOP was pressed within 3 seconds after RECORD, no

recording will take place.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

After recording, the display shows UPDATEfor several

seconds. The Total time indications can differ slightly.

However, no music information is lost.

SCAN TRACK

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

Note: In this Recording mode, the Pause function is not

operative.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

Important:

If you want to play the recorded CDR disc on any

regular CD player, it must first be finalized. See

finalizing discs.

•If DOES NOT FITappears on the display, there is not

enough recording space left on the CDR(W) disc.

You can press RECORD: only complete tracks that still fit on

the CDR(W) will recorded.

Finalized CDRW discs play only on CDRW compatible

CD players.

You can press PROG to select one or more tracks for

recording (see programming):

- rotate the EASY JOG/ENTER key to the required track

number, then press the key (or ENTER on the remote

control)

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

➜ MANUAL starts to flash and the display shows REC

Manual recording from external CD player

EXT MANfollowed by WAIT. After a few seconds

PRESS RECORDfollowed by the remaining time and

track number appear on the display.

EASY JOG

STORE/

CANCEL/

DELETE

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

ENTER

SYNC MANUAL

RECORD

PROG

OPEN / CLOSE

REC

PLAY

AUSE

STOP

RECORD

EXT

TYPE

FINALIZE

ERASE

SOURCE

CDR

4 Play the source first to set the optimal recording level on

the CD recorder.

ANALOG

5 Rotate the EASY JOG/ENTER key until, on the Record/Play

Level bar, all the blue segments are alight, but the red

segments do not light continuously during the loudest

passages.

CDR 77X

AUDIO CD RECORDER

PROG

SHUFFLE

PHONES

DISPLA

DJ MODE

SCROLL

REPEA

➜ Display shows _XX DB(Decibel, e.g. -3DB).

Important:

6 Stop the source.

- Recording from CD-changers should always be started in the

Auto-Start mode.

- Only make analog recordings when digital recording is not

possible.

Start manual recording

1 To start recording, press RECORD on the CD recorder and

Preparing for manual recording

immediately start the source (from Pause or Stop-mode).

➜ dlights continuously. The track number and recording

time left appear on the display.

1 Make sure the disc is absolutely free of scratches and dust

particles.

•If CHECK INPUTmessage also flashes, the digital

connection is incorrect.

2 Press EXT(ernal) SOURCE repeatedly until (depending on the

connection used):

➜ DIGITAL I, OPTICAL I or ANALOG lights up and

DIGITAL 1, OPTICALor ANALOGappears on the

display.

•To record a 3-second silence at the start of a track, press

PAUSE on the CD recorder before starting the source.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

•To check the total remaining recording time, press DISPLAY

on the CD recorder. (This can also be done during the

recording.)

SYNC MANUAL

RECORD

PROG

2 To stop recording, press STOP on the CD recorder.

•When Auto Track is On (default setting), track numbers will

automatically be increased during recording.

➜ UPDATElights up and dgoes out.

• If STOP was pressed within 3 seconds after RECORD, no

recording will take place.

•To switch off the Auto Track function you have to enter

Menu mode.

If you wish to increase track numbers manually, press

TRACK INCR(ement) on the remote control. For further

instructions see Menu mode.

• To interrupt recording, press PAUSE on the CD recorder.

dstarts to flash. Press PAUSE again to restart recording.

( A new track will always be made.)

ON (Auto): The track increments are automatically taken over

from the digital source material or after 2.7 seconds

silence during analog recording.

After recording the display will show UPDATEfor several

seconds.

Note: With AUTO TRACKON, the recorder will stop and go

to REC STANDBY for 1 minute and then goes to Stop

mode automatically. Recordings from DAT, DCC or

recordings made analogously will stop after 20 seconds

silence. With AUTO TRACK OFF, the auto stop

mode is disabled.

OFF (Manual): While recording track numbers can be

incremented manually by pressing TRACK INCR(ement) on

the remote control. (Minimum track length is 4 sec.) (This

can also be done in Auto track ON mode.)

• Track numbers cannot be changed after recording.

Important:

Note: Auto track works only with Consumer Sources with a

digital output signal according to the IEC 958

(consumer part) audio standard.

If you want to play the recorded CDR disc on any

regular CD player, it must first be finalized. See

finalizing discs.

3 With the recorder stopped, press REC TYPE five times to

Finalized CDRW discs play only on CDRW compatible

CD players.

enter the Manual Record standby mode.

For recording from CD changers always use REC EXT

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

•If, however, you start the source during a track, CD-SYNC

recording starts at the beginning of the next track or after

2.7 seconds of silence in analog recordings.

DISC.

Autostart recording from external CD player

CD-SYNC

OPEN / CLOSE

REC

PLAY

AUSE

STOP

RECORD

EXT

TYPE

FINALIZE

•To check the remaining recording time on the CDR(W), press

DISPLAY. (This can also be done during recording.)

ERASE

SOURCE

CDR

•The EASY JOG/ENTER key can be used to adjust the

recording level.

ANALOG

CDR 77X

AUDIO CD RECORDER

PROG

SHUFFLE

PHONES

DISPLA

SCROLL

REPEA

DJ MODE

•The recorder stops automatically.

2 To stop recording manually, press STOP on the CD recorder.

➜ UPDATElights up and SYNC and dgo out.

The CD-SYNC feature enables you to make fast and easy

recordings of a CD. Track increments are automatically

detected from the source material. Track increments cannot

be added manually. In analog source material a silence of 2.7

seconds or more is automatically detected as a track

increment.

•If STOP 9was pressed within 3 seconds after pressing

PLAY, no recording will take place.

•To interrupt recording, press PAUSE on the CD recorder.

➜ dstarts to flash. (Autostart recording is disabled.) To

resume, press RECORD on the CD recorder.

Preparing for autostart recording

1 Make sure the disc is absolutely free of scratches and dust

particles.

After recording the display will show UPDATEfor several

seconds.

2 Press EXT(ernal) SOURCE repeatedly until (depending on the

digital connection used):

Note:

➜ DIGITAL I, OPTICAL I or ANALOG lights up and

DIGITAL 1, OPTICALor ANALOGappears on the

display.

- Recordings from DAT, DCC or analog sources will only stop

after 20 seconds silence.

- Auto track is always active.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

Important:

If you want to play the recorded CDR disc on any

regular CD player, it must first be finalized. See

finalizing discs.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

3 With the CD recorder stopped, press REC TYPE four times:

Finalized CDRW discs play only on CDRW compatible

CD players.

if you wish to record a complete disc or program.

➜ dand SYNC start to flash and the display shows REC

EXT DISCand WAITfollowed by the track number,

the total remaining time and START SOURCE.

For recording from CD changers always use REC EXT

DISC.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

•If input label (DIGITAL I) flashes, the digital connection is

incorrect.

Start autostart recording

1 To start recording, press PLAY on the selected source.

➜ The CD recorder automatically starts to record and d

lights continuously. The track number and track time

appear on the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

Finalizing CDR & CDRW discs

Unfinalizing CDRW discs

During finalizing the Table of Contents (TOC) is written to the

disc.

For CDRW discs only.

If you want to make more recordings (or erasures of tracks) on a

finalized disc you must unfinalize it first. The Table of Contents

(TOC) will be removed. (This is not possible for CDR discs.)

To unfinalize:

Finalizing is a simple procedure, necessary to:

- be able to play recordings on a CD PLAYER,

- avoid further unwanted recordings on a disc,

- avoid erasure of tracks on a CDRW,

- write CD text on a CDR(W).

1 With the CD recorder stopped, press REC TYPE or ERASE.

➜ UNFINALIZE and PRESS ENTER will appear on

the display.

Auto finalizing

REM

REC

TRACK TIME

STEP

TIME TRACK

TOTAL REM

Auto finalizing is possible when using the MAKE CD recording

function.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

Manual finalizing

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

1 Make sure the disc (in the CD recorder deck) is absolutely

free of scratches and dust particles.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

2 With the recorder stopped press FINALIZE.

➜ The display shows FINALIZE CDand PRESS

RECORD.

CHANGER

DIGITAL

OPTICAL

ANALOG

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

2 Press JOG (ENTER).

➜ The disc will now be unfinalized and can be recorded on

again and the Recording or Erasure mode is entered.

SYNC MANUAL

RECORD

PROG

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

10 11 12 13 14 15

SYNC MANUAL

RECORD

PROG

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

3 You can now start recording or erasing. If no further

recording or erasure is required press STOP 9.

CHANGER

DIGITAL

OPTICAL

ANALOG

3 Press RECORD.

➜ XX XX FINALand the approximate finalization time

appears on the display.

Note:

- Unfinalizing will take approximately 1 minute 30 seconds.

- When unfinalizing a CDRW disc with text on it available,

this text will be transferred to the CD recorder memory. It

may occur that the text memory is full. The message

MEMORY FULL/FINALIZE CDwill be displayed.

To empty the recorders text memory you have to erase text

from it. This can be done in two ways:

The display counts down through the finalization.

On completion, the total number of tracks and the total

time recorded appears on the display.

^{For CDR(W),}r^{changes to}d^{on display.}

Finalizing will take at least 2 - 4 minutes.

1) Finalize one or more unfinalized discs for wich CD text is

available.

Note:

2) Delete text of unfinalized discs with the ‘memory view’

option in the Menu mode.

- During finalization, the CD recorder accepts no operating

commands.

- When a CDR is finalized no more recordings can be added.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

To erase the entire disc:

Erasing CDRW discs

1 Press ERASE twice.

➜ The display shows the number of tracks and their total

playing time. ERASE DISCand PRESS RECORD

light up.

EASY JOG

STORE/

CANCEL/

DELETE

ENTER

• If the disc is finalized, CD appears on the display after

inserting a CDRW in the recorder. The recorder will ask you

to confirm unfinalizing first. Confirm by pressing the EASY

JOG/ENTER key or ENTER on the remote control.

OPEN / CLOSE

REC

PLAY

AUSE

STOP

RECORD

EXT

SOURCE

TYPE

FINALIZE

ERASE

CDR

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

For unfinalized CDRW discs only.

You can erase:

- Tracks can only be erased from the end.

9 10 11

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

- With the EASY JOG you can erase more tracks.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

9 10 11

SYNC MANUAL

RECORD

PROG

Note: It is not possible to erase tracks within the

sequence.

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

- It is also possible to erase the entire disc at once.

2 Press RECORD.

➜ The display shows the total countdown time and

To erase one or more tracks from the end:

ERASE The complete disc will be erased.

1 Press ERASE once.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

➜ The display shows the number of tracks and their total

playing time. ERASE TRACKand PRESS RECORD

lights up.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

•If the disc is finalized, CD appears on the display after

inserting a CDRW in the recorder. The recorder will ask you

to confirm unfinalizing first. Confirm by pressing the EASY

JOG/ENTER key or ENTER on the remote control.

Erasure of a complete disc may take up to 15 seconds.

2 Select the track(s) you wish to erase by turning the EASY

JOG/ENTER key to the left.

➜ The selected track numbers start blinking on the track

bar.

➜ The display shows the remaining time after erasing the

selected track(s), the shown track will also be included

in the erasure of tracks.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

9 10

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

9 10

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

3 Press RECORD.

➜ The display shows the total countdown time and

ERASE.

➜ After the selected track(s) have erased, the display

shows the remaining tracks and their total playing time.

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING

Play a 2-disc changer (Changer mode)

Playing CDs on Deck 1 and/or Deck 2 (DJ mode)

Your CD recorder is able to play the two decks sequentially

(CHANGER mode). This is the default setting.

With this double deck it is possible to play the CD recorder

deck and/or the CD player deck individually (at the same

time). In this case the extra CD output must also be connected

to an amplifier.

1 Select Changer mode using the DJ MODE key.

➜ CHANGERappears on the display and iCHANGERh

lights up.

1 Select DJ mode using the DJ MODE key.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

➜ DJ MODEappears on the display and j klights

up.

10 11 12

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

10 11

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

2 On the deck you want to play, press PLAY/PAUSE 2;to

start CD play.

➜ 2lights up, the track number and track time of the track

in play appear on the display.

2 On the deck you want to play, press PLAY/PAUSE 2;to

start CD play.

➜ After playing the first disc the second disc will

automatically be played.

➜ 2lights up and the track number and track time of the

track in play appear on the display.

•Press DISPLAY once, twice or three times to see:

➜ remaining track time, total remaining time, permanent

text information (see Menu mode).

•You can also play the two decks at the same time. By

pressing the CDR key or the CD key you can choose the

deck you want to listen to.

•To interrupt play temporarily, press PLAY/PAUSE 2;again.

➜ ;lights on the display.

•Press DISPLAY once, twice or three times to see:

➜ remaining track time, total remaining time, permanent

text information (see Menu mode).

•To continue play, press PLAY/PAUSE 2;again.

•To interrupt play temporarily, press PLAY/PAUSE 2;again.

3 To stop play, press STOP 9.

➜ ;lights on the display.

➜ The number of tracks and the total playing time appear

on the display.

•To continue play, press PLAY/PAUSE 2;again.

•If you want to see the information about the other deck,

press the CDR key or the CD key in the display frame.

3 To stop play, press STOP 9.

➜ The number of tracks and the total playing time appear

on the display. If you want to see this information about

the other deck, press CDR or CD.

RCE

CDR

RECORD

ANALOG

CDR 77X

AUDIO CD RECORDER

PROG

SHUFFLE

PHONES

DISPLA

DJ MODE

SCROLL

REPEA

PEED

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING

Selecting a track

EASY JOG

STORE/

CANCEL/

DELETE

EASY JOG

STORE/

CANCEL/

DELETE

ENTER

OPEN / CLOSE

REC

PLAY

AUSE

STOP

RECORD

EXT

SOURCE

TYPE

FINALIZE

ERASE

CDR

1 Hold down 5or 6 (in play mode).

➜ The player first searches backwards or forwards at 10

times normal speed with sound at low volume, then

goes to 50 times normal speed with sound muted.

Selecting a track during play

2 Release the button at the desired passage.

➜ Play starts at the desired passage.

1 Turn the EASY JOG/ENTER key until the required track

number appears on the display.

Note: During Shuffle, Repeat Track or Programmed play,

search is restricted to within the track being played at

the time.

➜ Play skips to the beginning of the selected track.

Select CDR or CD on the remote control and key in the

required track number using the numerical keys on the

remote control. For 2-digit track numbers, press the keys in

rapid succession. For tracks on the other disc, first press CD

or CDR as applicable.

➜ Play skips to the beginning of the selected track.

Press ¡or ™on the remote control one or more times.

➜ Play skips to the beginning of the present, previous or

subsequent tracks, including tracks on the disc in the

other deck. (Changer mode only.)

Selecting a track when CD play is stopped

1 Turn the EASY JOG/ENTER key until the required track

number appears on the display.

2 Press EASY JOG/ENTER or ENTER on the remote control to

confirm or press PLAY/PAUSE 2;to start playing.

1 Select CDR or CD on the remote control and key in the

required track number using the numerical keys. For 2-digit

track numbers, press the keys in rapid succession. Play

starts.

1 Briefly press ¡or ™one or more times.

2 Start playback by pressing PLAY/PAUSE 2;, EASY

JOG/ENTER or ENTER on the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING

Shuffle (random order) play

Repeat CD, track or program

Only in Changer mode.

1 Press REPEAT one or more times during CD play.

➜ When REPEAT TRACK lights up, the current track plays

repeatedly. When REPEAT ALL lights up, the disc or

program plays repeatedly.

1 Select Changer mode, if nessesary, using the DJ MODE key.

2 Press SHUFFLE before or during CD play to start shuffle

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

play.

➜ The tracks on the CD (or program if set) play in random

10 11

SYNC MANUAL

RECORD

PROG

order.

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

3 Press SHUFFLE again to disable the Shuffle mode.

➜ CD recorder goes to Stop mode.

2 To return to normal play, press REPEAT one or more times

until:

➜ the REPEAT label disappears from the display.

Note: Shuffle is also cleared if you open the disc tray.

Note:

- You can use shuffle in combination with REPEAT ALL or

programmed play of the 2-disc changer.

- REPEAT is also cleared if you open the disc tray.

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING

Programming for recording

Remarks about programming

1 Press REC TYPE to select the required recording mode (see

‘Recording’).

•You can program up to 99 tracks to play in any desired

sequence.

2 Compile your programme as described in “programming for

playback”. (steps 3 to 5)

•Tracks can be programmed more than once, but each time

counts as a track. (STEP)

•Only tracks from the disc in the CD player can be stored.

•A program for playback can be made from both the disc in

the recorder deck and the disc in the player deck. A program

for recording can only be made from the disc in the player

deck.

3 Press RECORD to start recording.

Note:

- To review the program, press PROG(ram), followed by 5or

6with the CD player or CD recorder in stop mode.

- To add more tracks to the program, repeat steps 1 to 7.

- If you try to store more than 99 tracks, PROG FULL

appears on the display.

Programming for playback

1 Select Changer mode or DJ mode using the DJ MODE key.

➜ CHANGERor DJ MODEappears on the display.

2 Press CDR or CD to select the required deck.

➜ Selected key lights up.

Clearing a program

1 Press STOP 9if necessary to stop programmed play.

3 Press PROG(ram) to enter Program mode.

➜ PROG flashes and PROGRAMfollowed by track

information appears on the display.

2 Press STOP 9again to clear the program.

➜ PROG disappears from the display.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

•The program is also cleared if you open the disc tray.

Erasing a track from a program

10 11

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

1 In Stop mode press PROG(ram) to enter Program mode.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

2 Use 5or 6to select the track that has to be deleted.

➜ The track number and program step will be shown on

the display.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

3 Press CANCEL/DELETE to erase the track from the program.

➜ The remaining program steps and the remaining playing

time of the program will be displayed.

4 Select the required track numbers by turning the EASY

JOG/ENTER key left or right and store by pressing ENTER.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

4 Repeat step 2 and 3 for all tracks to be erased.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

5 Press STOP 9or PROG(ram) to end erasing.

➜ PROG lights continuosly.

or:

Key in a track number with the number keys on the remote

control and press ENTER to confirm. For 2-digit numbers,

press the keys in rapid succession.

➜ The track will be stored in the program.

➜ The track number, total program time and the number of

programmed tracks (STEP) are displayed.

5 Repeat step 4 for all tracks to be programmed.

6 Press STOP or PROG(ram) to end programming.

➜ PROG lights continuously.

7 Press PLAY/PAUSE 2; to start programmed play.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU MODE

Remarks about Menu mode

General operation of Menu

•In Menu mode you will have access to a number of features

which are not available via the regular keys (on the deck’s

front and the remote control).

Menu active in Recording or Stop mode.

1 When using the remote control select first CDR.

2 Press STORE/MENU on the deck or the remote control to

enter Menu mode.

➜ TEXT EDITappears on the display.

•The TEXT submenus (A-B) allow you to give names to discs

and tracks. The disc and track names will be displayed

during playback.

3 Rotate EASY JOG/ENTER to select the required submenus.

4 Press EASY JOG/ENTER to confirm selections.

•In the RECORDING submenus (D-E) you can set Auto Track

and Balance.

5 Rotate EASY JOG/ENTER to select options in the submenus.

6 Press EASY JOG/ENTER to confirm selections.

•All settings (except Balance) made in Menu mode will be

stored in the deck’s memory and can be called up and

changed at any time.

7 Press STORE/MENU to store settings and return to the

submenu.

8 Press STOP 9to store settings and exit Menu mode.

Note: Text can only be edited for unfinalized discs. (Finalized

CDRW discs must be unfinalized first.)

EASY JOG

STORE/

CANCEL/

DELETE

MAIN MENU

LEVEL 1

LEVEL 2

ENTER

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

ALBUM ARTIST

ALBUM TITLE

ARTIST TR 1

TITLE TR 1

ARTIST TR N

TITLE TR N

10 11 12 13 14 15 16 17

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

CDR

SCAN TRACK

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11 12 13 14 15 16 17

SYNC MANUAL

RECORD

PROG

;

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

MENU/

STORE

PROG.

ENTER CANCEL

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11 12 13 14 15 16 17

ALL TEXT

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

ALBUM ARTIST

ALBUM TITLE

ARTIST TR 1

TITLE TR 1

ARTIST TR N

TITLE TR N

10 11 12 13 14 15 16 17

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11 12 13 14 15 16 17

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11 12 13 14 15 16 17

"TITLE CD 1"

"TITLE CD 2"

"TITLE CD 3"

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

"TITLE CD n"

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11 12 13 14 15 16 17

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

OFF

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11 12 13 14 15 16 17

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

SCAN TRACK

L 100 R 100

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU MODE/CD TEXT

A. Text input/text edit

B. Erasing text/text erase

ALL TEXT

TEXT EDIT

TEXT ERASE

ALBUM ARTIST

ALBUM TITLE

ARTIST TR N

TITLE TR N

NO TEXT

ALBUM TITLE

ARTIST TR N

TITLE TR N

CD Text can be added to a recording or changed.This can be

done in Stop mode or during recording.

1 Press STORE/MENU.

➜ TEXT EDITappears on the display.

Text will be stored in the recorder memory and can be edited

until the CDR is finalized. Text on a (unfinalized) CDRW can be

edited at any time.

2 Rotate the EASY JOG/ENTER key to select the TEXT ERASE

submenu.

➜ TEXT ERASEappears on the display.

1 Press STORE/MENU.

➜ TEXT EDITappears on the display.

3 Press EASY JOG/ENTER to confirm.

➜ If text is available ALL TEXTappears on the display.

(When there is no text available the message NO TEXT

appears on the display.)

2 Press EASY JOG/ENTER to confirm.

➜ ALBUM ARTISTappears on the display.

4 Rotate EASY JOG/ENTER to select the required option in

the submenu: ALL TEXT, ALBUM ARTIST, ALBUM

TITLE, ARTIST TR 1, TITLE TR 1, etc.

3 Rotate EASY JOG/ENTER to select the required option in

the submenu: ALBUM ARTIST, ALBUM TITLE,

ARTIST TR 1, TITLE TR 1, etc.

5 Press EASY JOG/ENTER to confirm.

➜ The display will ask you to reconfirm your selection.

ERASE OKappears on the display.

4 Press EASY JOG/ENTER to confirm.

➜ The first character space appears on the display.

5 Select the characters by rotating the EASY JOG/ENTER key

or by pressing the corresponding numeric/alphabet key on

the remote control.

6 Press EASY JOG/ENTER to reconfirm.

➜ UPDATEappears on the display.

7 Press STORE/MENU to return to the submenu or STOP 9to

6 Press EASY JOG/ENTER to store each character and move

exit.

to the next cursor position.

• With the 5 6keys you can move to a required cursor

position.

• With the CANCEL key you can delete a character.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

7 Press STORE/MENU to store a name you have entered and

return to the submenu resume at 3 or STOP 9to exit.

Note:

- A maximum of 60 characters can be stored per item.

- By pressing the EASY JOG/ENTER key or ENTER on the

remote control without selecting a character first, you can

insert a space between characters.

- When an artist’s name has been stored for a certain track,

the name will automatically be copied for the next track.

The name can be confirmed by pressing STORE/MENU or a

new name can be entered as described above.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU MODE/CD TEXT

Note:

C. Reviewing CD Text in memory/memory view

- If there are no discs in the memory, the message MEMORY

EMPTYappears on the display.

MEMORY VIEW

CD 1

- When the text memory of your CD recorder is full, the

message MEMORY FULLwill appear, followed by

FINALIZE CD. If you want to add a CD to the list of

discs for which text is stored, you have to erase a disc from

this list or finalize another disc. (“for which text is stored”)

- MEMORY FULL/FINALIZE CDmay also appear when

unfinalizing a CDRW disc for which text was stored (see

‘Unfinalizing CDRW discs’). The same action(s) should be

taken in order to obtain memory space.

CD 2

CD N

CD Text is stored in the recorders memory. When a CDR(W)

will be finalized the CD Text will be written on the disc and

removed from the recorders memory. With the MEMORY

VIEW function one can view/delete the CD Text in the

recorders memory per unfinalized disc. The amount of memory

used is displayed each time the tray opens with an

unfinalized CDR(W) inserted.

(e.g. MEMORY 9%)

1 Press STORE/MENU.

➜ TEXT EDITappears on the display.

2 Rotate the EASY JOG/ENTER key to select the MEMORY

VIEW submenu.

➜ MEMORY VIEWappears on the display.

3 Press EASY JOG/ENTER to confirm.

➜ The first album title in the recorder memory appears on

the display.

4 Select the album title you wish to erase by rotating the

EASY JOG/ENTER key.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

5 Press EASY JOG/ENTER to confirm.

➜ ERASE MEMORYappears on the display.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

10 11

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

6 Press the EASY JOG/ENTER key to confirm the erasure of

the text for that particular disc.

➜ UPDATEappears on the display.

7 Press STORE/MENU to return to the submenu or STOP 9to

exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU MODE/RECORDING SETTINGS

D. Auto track increment/auto track

E. Balance (only active in Record/Standby mode)

AUTO TRACK

SET BALANCE

L 100 R 100

OFF

1 Press STORE/MENU.

➜ TEXT EDITappears on the display.

1 Press STORE/MENU.

➜ TEXT EDITappears on the display.

2 Rotate the EASY JOG/ENTER key to select the AUTO TRACK

submenu.

➜ AUTO TRACKappears on the display.

2 Rotate the EASY JOG/ENTER key to select the SET

BALANCE submenu.

➜ SETBALANCEappears on the display.

3 Press EASY JOG/ENTER to confirm.

➜ ONappears on the display.

3 Press EASY JOG/ENTER to confirm.

➜

FE and L 100 R 100appear on the display.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

4 Turn the EASY JOG/ENTER key to select Auto track ONor

OFF.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

SCAN TRACK

CHANGER

DIGITAL

OPTICAL

ANALOG

•When ONis selected, track numbers will be automatically

incremented during recording.

4 Adjust recording balance by turning the EASY JOG/ENTER

•When OFFis selected, you can number the recorded tracks

key.

yourself.

•Turn left: the figure left (

) counts down, right counts up.

REM

REC TIME TRACK

TOTAL REM TRACK TIME

STEP

EASY JOG

STORE/

10 11

•Turn right: the figure right (

) counts down, left counts up.

SYNC MANUAL

RECORD

PROG

SHUFFLE ALL

REPEAT

CHANGER

DIGITAL

OPTICAL

ANALOG

ENTER

SCAN TRACK

5 Press EASY JOG/ENTER to confirm.

➜ AUTO TRACKappears on the display.

6 Press STORE/MENU to store settings.

Note: The balance setting will not be stored permanently.

6 Press STORE/MENU to store settings and return to the

submenu or STOP 9to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

FIXING PROBLEMS

Will not record

• clean the disc

TROUBLESHOOTING

• check if CDR(W) is an unfinalized disc

• check that the disc is recordable and replace

if necessary

If your CD recorder is defective, it is wise to check this list

first. You may have forgotten a simple step.

• the disc is not an AUDIO disc (WRONG

DISC)

• wrong input source chosen. Input label

flashing (CHECK INPUT)

• text memory full (MEMORY FULL/

FINALIZE CD). When a CDRW has to be

unfinalized for recording. Erase text for other

disc(s) or finalize other disc(s) to obtain

memory space

• total remaining time not sufficient, try

programming tracks (see programming)

Warning!

Under no circumstances should you attempt to repair

the CD recorder yourself as this will invalidate the

guarantee.

SYMPTOM • possible solution:

No power • ensure that the ON/OFF button is on (red led

on): the CD Recorder is in standby mode,

press any key to activate it

• ensure that the mains cable is plugged in

correctly

• switch the recorder OFF and then

immediately back ON

Recording is distorted

• make sure the recording level is correct

20 second pause between recordings

Auto track does not work

• see Autostart recording from external CD

player (CD-SYNC)

• check if auto track on is selected in the menu

• check if there are 2.7 seconds silence in

between the tracks (analog recording only)

• check if the source is a consumer source with

the digital output according to the IEC audio

standard

Player does not react

• switch the ON/OFF button on the front of the

player off and back on

• source is DVD player (no track information)

DISC RECOVERon display

• a power failure has occurred during

recording, the CD recorder is attempting to

repair the disc

• if DISC ERRORthen appears on the

display, the disc cannot be recorded further,

and cannot be finalized. But it can still be

played on the CD recorder or another CD

recorder

No sound • check the audio connections

• if using an amplifier, try using a different

source

Amplifier sound is distorted

• check that the CD recorder analog output is

not connected to the amplifier Phono input

• on a CDRW disc, the track being recorded is

lost, but further recording and finalization can

still be done

Play will not start

• ensure that the label of the CD is facing up

• clean the disc

• check that the disc is not defective by trying

another disc

Remote control does not work

• point the remote control towards the CD

recorder

• check the batteries and replace if necessary

• select the correct source first

Download from Www.Somanuals.com. All Manuals Search And Download.

The products and services described herein are not necessarily available in all contries.

The specifications and design of this product are subject of change without notice.

Printed in Hungary.

All trademarks acknowledged.

http://www.philips.com

3104 125 2287.2

Download from Www.Somanuals.com. All Manuals Search And Download.

Peerless Industries TV Mount PT630 User Manual
Pelco Switch FX82051 User Manual
Philips Camera Accessories LR14PS16C User Manual
Philips Digital Photo Frame 7FF3FPX User Manual
Philips Electric Toothbrush C5992 User Manual
Philips Stereo Amplifier BGY2016 User Manual
Pioneer DVD Player DV 434 User Manual
Pioneer Stereo Receiver PDK 1014 User Manual
Polycom Conference Phone 725 48617 001 User Manual
Poulan Lawn Mower 186888 User Manual