Owner’s Manual
Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
PVD2000
Supplied Accessories
Remote control (NB183UD) RF cable
with two AA batteries
(WPZ0901TM002)
Audio/Video cables
(WPZ0102TM015 /
WPZ0102LTE01)
Owner’s Manual
(1VMN23215)
If you need additional operating assistance
after reading this owner’s manual, please call
TOLL FREE : 1-800-317-6062
or visit our web site at
Owner's Manual
Table of Contents
Precautions
■ Recording................................................................................. 12
Recording & OTR (One Touch Recording) ............................... 12
Timer Recording........................................................................ 12
Hints for OTR and Timer Recording.......................................... 13
Copying a Video Tape............................................................... 14
Laser Safety................................................................................ 2
■ Important Safeguards................................................................ 3
Location and Handling ................................................................ 4
Avoid the Hazards of Electrical Shock and Fire.......................... 4
Moisture Condensation Warning................................................. 4
About Copyright .......................................................................... 4
Notice for Progressive Scan Outputs.......................................... 4
Symbols Used in This Manual..................................................... 4
Maintenance................................................................................ 4
■ About the Video Cassettes and Discs ..................................... 5
Playable Video Cassettes ........................................................... 5
Playable Discs............................................................................. 5
Unplayable Discs ........................................................................ 5
DVD Functions
■ Playback ................................................................................... 15
■ MP3 Playback........................................................................... 16
■ On-Screen Display................................................................... 16
■ Search Functions..................................................................... 17
Using Track Search................................................................... 17
Using Title / Chapter Search..................................................... 17
Using Time Search.................................................................... 17
Marker Setup............................................................................. 17
■ Repeat / Random / Programmed Playback............................ 18
Repeat Playback / Repeat A-B Playback.................................. 18
Random Playback / Programmed Playback.............................. 18
■ Special Settings....................................................................... 19
Subtitle Language / Audio Language / Camera Angle.............. 19
Black Level Setting / Stereo Sound Mode / Virtual Surround.... 19
■ DVD Setup ................................................................................ 20
LANGUAGE Setting.................................................................. 20
DISPLAY Setting....................................................................... 21
AUDIO Setting........................................................................... 21
PARENTAL Setting................................................................... 22
OTHERS Setting....................................................................... 22
Reset to the Default Setting (Except for PARENTAL Setting) .. 23
Setup
■ Connections............................................................................... 6
RF Output Channel ..................................................................... 6
Hint for Cable Box or Satellite Box.............................................. 6
Connection to an Audio System.................................................. 6
Connection to a TV ..................................................................... 7
■ Preparation for Use ................................................................... 8
Turn on the Unit for the First Time .............................................. 8
To Add or Delete Channels......................................................... 8
Clock Setup................................................................................. 8
■ Function Overview..................................................................... 9
Front Panel Indicator................................................................... 9
VCR / DVD Switching.................................................................. 9
Front & Rear Terminals............................................................... 9
Remote Control......................................................................... 10
Installing the Batteries for the Remote Control ......................... 10
Information
■ Troubleshooting Guide ........................................................... 23
■ Specifications .......................................................................... 24
■ Language Code List ................................................................ 24
■ Limited Warranty ..................................................................... 24
■ Español..................................................................................... 25
■ Quick Use Guide...................................................................... 27
VCR Functions
■ Playback ................................................................................... 11
■ Other Operations ..................................................................... 11
Index Search............................................................................. 11
Time Search.............................................................................. 11
Auto Repeat .............................................................................. 12
Basic TV Connection
Antenna
or
Cable TV Antenna
signal
or
Cable TV
signal
(Back of DVD/VCR)
(Back of TV)
4
AC
outlets
(Back of TV)
Plug in
ANT-IN
2
ANT-OUT
Disconnect
3
Connect
Connect
From DVD/VCR
From TV
RF cable (supplied)
Please refer to “Connections” on page 6.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause
hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
14. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the video product due to lightning
and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
8. Accessories - Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The video
product may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any mount-
ing of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer. An appliance and
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appli-
ance and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are pro-
vided for ventilation and to ensure reliable operation of
the video product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This
video product should not be placed in a built-in installa-
tion such as a bookcase or rack unless proper ventilation
is provided or the manufacturer's instructions have been
adhered to.
19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
10. Power Sources - This video product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
11. Grounding or Polarization - This video product is
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with regard to proper
e. If the video product has been dropped or damaged in
any way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to per-
form safety checks to determine that the video product is
in proper operating condition.
22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–
–
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Handling
Symbols Used in This Manual
•
Do not stand this unit up vertically. Install this unit in a hori-
zontal and stable position. Do not place anything directly on
top of this unit. Do not place this unit directly on top of the TV.
The following symbols appear in some headings in this
manual.
: Description refers to playback or recording of
video cassette tapes.
• Depending on the TV, noise or disturbance of the picture
and/or sound may be generated if this unit is placed too
close to your TV. In this case, please ensure enough space
between your TV and this unit.
:
Description refers to playback of DVD-Video discs.
• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.
: Description refers to playback of Audio CDs.
: Description refers to playback of Video CDs.
: Description refers to playback of MP3 files.
•
Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
Authorized Service Center immediately.
Maintenance
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this
unit. For service and adjustment inside the cabinet, call a
qualified dealer or an Authorized Service Center.
• Be sure to remove disc and video tape and unplug the AC
power cord from the output before carrying this unit.
SERVICING
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 23 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
Authorized Service Center.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our Authorized Service
Center for servicing.
CLEANING DISCS
•
Do not put your fingers or objects into the unit cassette holder.
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a circu-
lar motion.
Do not use solvents such as benzine, thinner, commercially avail-
able cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
Moisture Condensation Warning
Moisture may form inside this unit under the following condi-
tions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm envi-
ronment.
If moisture forms inside this unit, it may not operate
properly or damage the video tape. In such case, turn on
the power and wait for more than 2 hours for the moisture to
evaporate.
•
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when it is not
used.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on the
video heads after a long period of use, or the usage of rental
or worn tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your
unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television
sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of picture prob-
lems with 525 progressive scan output, it is recommended
that the user switch the connection to the ‘standard definition’
output. If there are questions regarding your TV set compat-
ibility with this 525p DVD player, please contact our customer
service center.
Hint
Note to CATV system installer
• Remember to read the instructions along with the video head
cleaner before use.
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
• Clean video heads only when problems occur.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
–
–
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
with this unit.
Playable Discs
Playable
Mark (logo)
discs
Recorded
signals
Disc
size
Region code
Disc types
DVD-Video
*1, 2, 4,
6, 10
or
DVD-R
DVD-RW
*1, 3, 4, 5, 6,
7, 9, 10
Example
12 cm
or
8 cm
Title 1
Title 2
Digital video
(MPEG2)
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
DVD+RW
DVD+R
*1, 3, 4, 5, 6,
8, 9, 10
Video CD
*4, 6, 10, 11
Digital video
with audio
Video CD
or
Audio CD
Example
Audio CD
*4, 6, 10
Track 1
Track 2
Track 5
Track 6
Track 3
Track 4
12 cm
or
8 cm
Digital audio
MP3
or
MP3
Example
Group 1
Group 2
CD-R
CD-RW
Track 1
Track 3
Track 2
Track 4
Track 5
Track 6
*4, 5, 6, 9
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs Recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special prop-
erties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However, depend-
ing on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all the
picture or sound may not be smooth, etc.
*9: If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm) across), it may not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*11: This unit confirms to ver.1.1 and ver.2.0 of Video CD standard with PBC function.
Ver.1.1 (without PBC function) : You can enjoy playback picture as well as music CD.
Ver.2.0 (with PBC function) : While using a Video CD with PBC function, “Pbc” appears on the screen and the display.
NOTE: When playing Video CDs with PBC function, some operations (e.g., track search and repeat tracks) cannot be performed.
Cancel PBC function temporarily to perform those operations (refer to page 15).
What is PBC? “PBC” stands for Playback Control.
You can play interactive software using menu screens. Refer to instructions in the Video CD.
Unplayable Discs
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / DVD-Audio / CD-i / Photo CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal
computers / CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Any other discs without compatibility indications
–
–
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Connections
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 has been already occupied
for broadcasting,
5) After a few seconds, press and hold
[PLAY B] on the unit for 3 seconds.
• The RF output channel will change to
channel 4 from channel 3 and you will
see a playback picture.
• When a picture does not appear on the
TV screen, repeat step 4.
Hint
• The RF output channel does not
change when you adjust track-
ing during playback. In case RF
output channel changes, you
can easily switch it back just
start the playback again then
press and hold [PLAY B] on
the unit for 3 seconds.
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press [SOURCE] on the unit so that the
VCR SOURCE light is lit.
•
If noise appears on the TV screen, press
[VCR/TV] on the remote control.
6) Press [STOP C] to stop playback.
4) Press [PLAY B] once.
Hint for Cable Box or Satellite Box
To select channels of the cable box or satellite box
1) Turn on the unit by pressing [STANDBY-ON], then press
[VCR/TV]. The STANDBY-ON indicator on the front panel
(Back of DVD/VCR)
(Cable box or
Satellite box)
ANT-IN
Satellite or
Cable TV
signal
IN
OUT
G
K
H
L
ANT-OUT
will light, then press [SKIP/CH.
/
,
/
] to select
RF cable
(supplied)
channel 3 or 4 (the same channel as the output channel of
the cable box or satellite box).
• If you use the channel 4, you need to change the unit’s
RF output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel 3 or 4 (the same channel as you
have selected at step 1).
(Back of TV)
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot be
changed on the unit. You can view or record ONLY
the channels you have selected on the cable box or the
satellite box.
3) On the cable box or satellite box, select the channel you
want to view or record.
•
While you are recording, only the recorded channel can be viewed.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Audio
COAXIAL
L
R
Digital audio
input jack
Analog audio
input jacks
Audio cable
(supplied)
Audio Coaxial Digital cable
(commercially available)
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
COMPONENT
DIGITAL
VIDEO OUT
AUDIO OUT
L
AUDIO OUT
(Analog)
R
COAXIAL
DIGITAL
AUDIO OUT
DVD/VCR
or
DVD
SETUP > QUICK>
DOLBY DIGITAL
Setting
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
OUT OUT
AUDIO OUT
Connection
L
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
R
BITSTREAM
(DVD mode only)
Connecting to other equipment (an
MD deck or DAT deck etc.)
without Dolby Digital decoder.
PCM
Hint
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speaker.
* To complete these settings, refer to pages 20-21.
Hint
• The audio source on a disc in a Dolby Digital Multi channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital Multi channel surround
sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
–
–
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
Basic Audio
Method 1
Method 2
Method 3
TV
AUDIO IN
L
R
Better picture
Good picture
Best picture
COMPONENT
VIDEO IN
Y
Y
S-VIDEO IN
VIDEO IN
PB
CB
or
Audio cable
(supplied)
P
R
CR
S-Video cable
(commercially
available)
Video cable
(supplied)
DVD/VCR
DVD/VCR
AUDIO OUT
VCR
Component Video cable
(commercially available)
L
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
R
R
COAXIAL
VIDEO OUT
R
C
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
VCR
DVD
AUDIO S-VIDEO
OUT OUT
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
A
or
Y
DVD
AUDIO S-VIDEO
OUT OUT
DIGITAL
AUDIO OUT
C
PB/
B
VIDEO OUT
L
C
PR/
R
R
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to
“ON” in the SETUP menu, so that the P-SCAN indicator on the front panel lights on. See pages 20 to 21 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not
be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in the SETUP menu or by pressing and holding
[PLAY B] on the front of the unit for more than 5 seconds, so that the P-SCAN indicator light on the front panel turns off.
After you have completed connections
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel
(usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompa-
nying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
AUX CHANNEL
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
–
–
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation for Use
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Select “CHANNEL SET UP” by using [K//L], then press [B]
3) Select “AUTO SET UP” by using [K//L], then press [B]. After
Turn on the Unit for the First Time
VCR
Operation described in this manual are
mainly based on the remote control.
.
Turn on the TV and set it to channel 3.
scanning, the tuner stops on the lowest memorized channel.
1
2
•
If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Select “LANGUAGE SELECT” by using [K/L], then
press [B].
3) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by
using [K/L] then press [CLEAR/C.RESET].
Select your language when turning this unit on for the first time.
Then press [B] to go to next step.
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
Hint
CH 01
Press [B] to start Auto Set Up.
3
• If you accidentally select Spanish or French and need English: Press
[MENU] and choose SELEC. IDIOMA or SELECTION LANGUE.
Press [B] and select ENGLISH. Finally, press [CLEAR/C.RESET].
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L]
button works on the channel number memorized in this unit, [K/L]
works on all.
AUTO SET UP
Do you connect the cable from the cable box or the satellite box to
the unit’s ANT-IN jack?
YES
NO
Clock Setup
VCR
Yes Press [MENU] to exit.
•
Refer to “Hint for Cable Box or Satellite Box” section on page 6.
Press [MENU] and select “CLOCK SET”.
Then press [B] to go to next step.
No Please wait for a few minutes. After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G//K , H//L] (or [CHANNEL K///L]).
• If “AUTO SET UP” appears on the TV screen again, check the
cable connections. Then, press [B] once again.
1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
[OFF]
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when
you press [MENU]. In this case, go to step 2.
Hint
• Repeat these steps only if either there was a power failure or this
unit has been unplugged for more than 30 seconds.
CLOCK SET
Select the current month.
Then press [B] to go to next step.
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
To Select a Channel
HOUR MINUTE AM/PM
– –
:
– –
– –
or
You can select a channel by using the Number buttons or
[SKIP/CH.
G
/
K,
H/L].
CLOCK SET
Select the current day.
Then press [B] to go to next step.
Notes for using the Number buttons:
MONTH DAY
1 0 0 2
YEAR
– – – –
/
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam-
ple: 117, press [1], [1], [7])
HOUR MINUTE AM/PM
– –
:
– –
– –
or
• You must precede single-digit channel numbers with a zero.
(for example: 02, 03, 04 and so on)
CLOCK SET
Select the current year.
Then press [B] to go to next step.
4
5
MONTH DAY
1 0 0 2
YEAR
/
2 0 0 6
To Add or Delete Channels
HOUR MINUTE AM/PM
– –
:
– –
– –
or
VCR
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
- M E N U -
Press [MENU] to select “CHANNEL SET UP”.
Then press [B] to go to next step.
MONTH DAY
1 0
YEAR
1
/
0 2 MON 2 0 0 6
TIMER PROGRAMMING
AUTO REPEAT
B CHANNEL SET UP
CLOCK SET
[OFF]
HOUR MINUTE AM/PM
0 5
:
– –
– –
MENU
or
LANGUAGE SELECT
or
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
• If the clock is not set, the “CLOCK SET” screen appears when
6
7
8
MONTH DAY
1 0
YEAR
you press [MENU]. In this case, press [MENU] again.
/
0 2 MON 2 0 0 6
HOUR MINUTE AM/PM
CHANNEL SET UP
Select “MANUAL SET UP”.
Then press [B] to go to next step.
0 5
:
4 0
– –
2
3
4
5
or
AUTO SET UP
B MANUAL SET UP
or
CLOCK SET
Select “AM” or “PM”.
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
MANUAL SET UP
or
HOUR MINUTE AM/PM
Select the channel to be added or deleted.
0 5
:
4 0
P M AM
B PM
CHANNEL 30 (CATV)
ADD
or
or
or
To exit the CLOCK SET screen
MANUAL SET UP
Select “ADD” or “DELETE”.
CHANNEL 30 (CATV)
DELETE
or
Hint
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this
unit has been unplugged for more than 30 seconds.
CLEAR/
To exit the menu
C. RESET
–
–
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Front Panel Indicator
Lights up when the progressive scan system is activated.
Lights up when the inserted
disc is being played back.
Blinks when an unacceptable
disc is inserted.
Lights up during a recording.
Blinks when a recording is paused.
Lights up when this unit
is in the DVD mode.
OPEN/
CLOSE
VCR
DVD
P-SCAN
PLAY
REC
TIMER
VIDEO
STANDBY-ON
AUDIO
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
SOURCE
PREV
STOP
PLAY
NEXT
CHANNEL
Lights up when this unit is in the VCR mode.
Lights up when power is on.
Lights up when the Timer Recording
or an OTR recording has been set.
VCR / DVD Switching
You must select which component you wish to operate with
[SOURCE] first, as this product is a combination of a VCR
and a DVD player.
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
OPEN/
CLOSE
VCR
DVD
P-SCAN
PLAY
1
4
7
2
5
8
3
6
9
SOURCE
PREV
STOP
PLAY
NEXT
SKIP/CH.
CHANNEL
VCR MODE
VCR/TV
SLOW
Press [VCR] on the remote control.
0
VCR
+10
DVD
(Verify that the VCR SOURCE light is lit.)
VCR button
DVD button
DISPLAY
PAUSE
PLAY
DVD MODE
Press [DVD] on the remote control.
(Verify that the DVD SOURCE light is lit.)
STOP
SOURCE button
RECORD
MENU
VCR
DVD
ENTER
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
MODE
ZOOM
C. RESET
Hint
SOURCE
DVD SOURCE light
VCR SOURCE light
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
• Pressing only [SOURCE] on the front panel DOES NOT switch the
mode of the remote control. You MUST select the correct mode on
the remote control.
Front & Rear Terminals
2
3
REC
TIMER
DVD
DVD/VCR
VCR
ANT-IN
COMPONENT
VIDEO OUT
AUDIO OUT
DIGITAL
AUDIO S-VIDEO
I
VCR
OUT
OUT
AUDIO OUT
VIDEO
ANT-IN
STANDBY-ON
AUDIO
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
Y
L
4
O IN
AUDIO IN
L
I
IDEO IN
ANT-OUT
R
1
10
9
C
/
PB
B
ANT-OUT
COAXIAL
VIDEO OUT
VIDEO IN
R
C
/
PR
R
[Front Panel]
[Rear Panel]
8 7
6
5
6
3
6: VIDEO IN jack
1: DVD AUDIO OUT (analog) jacks
Connect a cable coming from the video out jack of a camcorder,
another VCR or an audio-visual source (laser disc player, video disc
player, etc.) here.
7: DVD/VCR VIDEO OUT jack
Connect the supplied video cable here through the video in jack of a
television.
Connect the supplied audio cable here through the audio in jacks of
a television or other audio equipment. (DVD only)
2: DVD/VCR AUDIO OUT jacks
Connect the supplied audio cable here through the audio in jacks of
a television or other audio equipment.
3: AUDIO IN jack
Connect audio cable coming from the audio out jack of a camcorder,
another VCR or an audio source here.
8: COMPONENT VIDEO OUT jacks
Connect optional COMPONENT VIDEO cables here through the
COMPONENT VIDEO in jacks of a television. (DVD only)
9: S-VIDEO OUT jack
Connect an optional S-VIDEO cable here through the S-VIDEO in
jack of a television. (DVD only)
4: ANT-IN jack
Connect your antenna or cable box here.
5: ANT-OUT jack
Connect the supplied RF cable to the antenna input jack of a television.
10: DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the
coaxial digital audio in jack of a decoder or audio receiver. (DVD only)
–
–
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DVD mode
VCR mode
Disc/Tape
OPEN/CLOSE
/EJECT
Button
STANDBY-ON
SPEED
AUDIO
(Alphabetical order)
1
4
7
2
5
8
0
3
6
•To select channel.
•The +10 button has no
effect in VCR mode.
1
4
7
2
5
8
3
6
9
•To select chapter or title
directly.
•To select track directly.
SKIP/CH.
9
+10
VCR/TV
SLOW
•To search forward/back-
ward through a disc.
•To begin slow forward/
reverse playback in the
pause mode.
•To search forward/backward
through a disc.
•To begin slow forward playback
in the pause mode. (VCD)
•To forward/backward a
tape.
0
VCR
+10
DVD
DISPLAY
PAUSE
A-B
•To repeat between your
chosen point of A and B.
•To repeat between your chosen
point of A and B. (CD/VCD)
PLAY
STOP
ANGLE
AUDIO
•To select camera angles
on a disc.
RECORD
MENU
ENTER
•To select audio languages •To select STEREO,
on a disc.
L-ch or R-ch. (CD/VCD)
SETUP TOP MENU
RETURN
•To clear the markers. (CD/VCD)
•To remove status number in
program input. (CD/MP3)
SEARCH
MODE
CLEAR/
MODE
ZOOM
C. RESET
•To clear the markers.
•To clear the numbers
entered incorrectly.
CLEAR/
C. RESET
SUBTITLE
T-SET
•To exit the VCR Menu.
•To reset the tape counter.
ANGLE
REPEAT
A-B
•To clear the numbers entered
•To cancel the point for A-B incorrectly.
repeat.
•To cancel the point for A-B
repeat. (CD/VCD)
DISPLAY
DVD
•To display the current disc
mode.
•To display the current time,
tape counter, and channel.
•To display the current disc mode.
•
To select the DVD output mode. •To select the DVD output mode.
•To activate the remote
control in DVD mode.
•To activate the remote
control in DVD mode.
•
To select an item
on the VCR Menu.
ENTER
•To advance to the
next VCR Menu.
•To go back one
step during clock
and timer setting.
•To move the cursor and
determine its position.
•To move the cursor and
determine its position.
Installing the Batteries for
the Remote Control
MENU
MODE
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
•To call up the Menu on a
disc.
•To call up the file list. (MP3)
•To call up the VCR Menu.
•To arrange the playing order or
play randomly. (CD/MP3)
•To set virtual surround on/off.
•To set black level on/off. (VCD)
•To set black level on/off.
•To set virtual surround
on/off.
OPEN/CLOSE
/EJECT
•To open or close the disc
tray.
•To eject the video
cassette from the VCR.
1
2
3
•To open or close the disc tray.
•To pause tape playback or
recording.
•To advance playback one
frame at a time.
•To pause disc playback.
•To pause disc playback.
PAUSE
•To advance playback one •To advance playback one frame
frame at a time.
at a time. (VCD)
•To begin disc playback.
•To begin disc playback.
•To begin tape playback.
PLAY
Keep in mind the following when using
the remote control:
RECORD
•To start a recording or One
Touch Recording.
•
Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.
•To play a track or disc repeatedly.
(CD/VCD)
•To play a track, group or disc
repeatedly. (MP3)
REPEAT
RETURN
•To play a chapter or title
repeatedly.
• The maximum operable ranges from
the unit are as follows.
•To return to the previous
operation in menu.
•To return to the previous
operation in menu.
SEARCH
MODE
•To search chapter, title or •To search track.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
•To call up the index or time
search menu.
time.
•To search time. (CD/VCD)
•To set or search the markers. (CD/VCD)
•
To set or search the markers.
SETUP
•To call up the DVD setup
menu.
•To call up the DVD setup menu.
•To change channels.
•To adjust the tracking
manually during playback.
SKIP/CH.
SKIP/CH.
•To skip chapters or titles.
•To skip tracks.
SLOW
• To view the tape in slow
motion.
SPEED
•To select the recording
speed.
STANDBY-ON
•To turn the unit on/off.
•To stop playback.
•To turn the unit on/off.
•To stop playback.
•To turn the unit on/off.
•To stop playback or
recording.
STOP
Hint
SUBTITLE
T-SET
•To put the VCR into
standby mode for a Timer
Recording.
• Do not mix alkaline and manganese
batteries.
•To select subtitles on a
disc.
• Do not mix old and new batteries.
•To return to the top file of the
highest hierarchy in the program
and file list. (MP3)
TOP MENU
VCR
•To call up the Top Menu
on a disc.
•
To select the VCR output mode.
•To activate the remote
control in VCR mode.
VCR/TV
ZOOM
•To select DVD position or •To select CD/MP3 position or TV •To select VCR position or
TV position.
position.
TV position.
•To magnify part of a
picture. (x2/x4)
•To magnify part of a picture.
(x2)(VCD)
–
–
10
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Functions
Playback
Before:
Turn on the TV and set it to channel 3.
Hint
• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
1
VCR
• When a tape
without record tab
is inserted, the unit
will start playback
automatically.
Tracking will be
automatically
adjusted upon play-
back. To adjust the
tracking manually,
press [SKIP/CH.
G/K, H/L] (or
[CHANNEL K/L])
during playback.
4
1 Insert a video
2
4
To start playback
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
cassette into this unit.
•
1
4
7
2
5
8
3
6
9
PLAY
SKIP/CH.
VIDEO
STANDBY-ON
AUDIO
REW
F.FWD
STOP/EJECT
PLAY
VCR/TV
SLOW
0
VCR
+10
DVD
DISPLAY
PAUSE
3
To stop playback
To eject the cassette
OPEN/CLOSE
/EJECT
STOP
PLAY
3 2
4
2
STOP
3
Other Operations
To cue or review picture during playback (Picture Search)
Counter Reset
Press [CLEAR/C.RESET].
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it
Use [g] or [h ]([F.FWD g] or [REW h]).
• Press it again and the unit will search in super high speed.
(in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the pic-
by using [SKIP/CH. G/K, H/L] (or [CHANNEL
Auto Rewind
When a tape reaches its end during playback, fast-forward
or recording (except Timer Recording and One Touch
Recording), the tape will automatically rewind to the beginning.
After rewinding finishes, the unit will eject the tape.
K/L]).
ture will be forwarded by one frame.
•
If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [SKIP/CH. G/K, H/L] (or
[CHANNEL
K/L]).
• If the picture is distorted or rolling vertically, adjust the verti-
cal hold control on your TV if equipped.
Hint
• Still/Slow mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
Index Search
Time Search
You can skip the program backward and forward by the Index
Mark.
You can search backward and forward a specific length of
time on a tape.
VCR
VCR
• Insert a tape into this unit.
• Insert a tape into this unit.
Press [SEARCH MODE] once.
Press [SEARCH MODE] twice.
1
1
SEARCH
SEARCH
MODE
MODE
TIME SEARCH
INDEX SEARCH
– : – –
– –
Select the desired length of time for fast forwarding or
To select Index Mark
2
2
rewinding.
INDEX SEARCH
0 3
TIME SEARCH
2 : 5 0
or
01 ~ 20
or
CURRENT PROGRAM
0:01~ 9:59
Beginning
of the tape
End of
the tape
(1 minute~9 hours and 59 minutes)
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
01
01
02
03
To rewind
3
INDEX MARK
ss
To rewind
3
4
ss
To fast forward
BB
To fast forward
BB
After searching, it automatically starts playback.
4
PLAYB
After searching, it automatically
starts playback.
PLAYB
Hint for Index Search & Time Search
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If a tape ends during a search, your search will be canceled and
the tape will rewind to the beginning.
Hint
•
The Index Mark will be made automatically at the beginning of each recording.
• The time gap between Index Marks should be greater than 1 minute
for SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.
–
–
11
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Repeat
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
VCR
Press [B] for
“AUTO REPEAT”, “ON” or “OFF”.
- M E N U -
- M E N U -
Press [MENU], and choose
“AUTO REPEAT” during playback.
2
1
TIMER PROGRAMMING
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
B AUTO REPEAT
[ON]
CHANNEL SET UP
CLOCK SET
MENU
LANGUAGE SELECT
LANGUAGE SELECT
or
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
Recording
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel 3.
1
2
3
6
• If channel 3 has been already occupied for
broadcasting, see “RF Output Channel” section on
page 6.
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
VCR
1
4
7
2
5
8
3
6
9
REC
TIMER
SKIP/CH.
VIDEO
1
3
Insert a cassette with 2 Select the channel
tab into this unit. to record.
STANDBY-ON
AUDIO
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
VCR/TV
SLOW
2
CHANNEL
1
4
7
2
5
8
0
3
6
9
0
VCR
+10
DVD
DISPLAY
PAUSE
SKIP/CH.
or
5 6
4
PLAY
STOP
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on
it later, cover the hole with adhesive tape.
5
4
RECORD
MENU
Press [SPEED] to select the desired tape speed.
ENTER
SPEED
SETUP TOP MENU
RETURN
Record tab
Tape Speed
Type of tape
SP mode
Recording/Playback Time
T60
T120
2hours
6hours
T160
1hour
3hours
2-2/3hours
8hours
SP
You CAN NOT dub a DVD to a videotape.
SLP mode
To stop recording temporarily (Pause mode)
Press [PAUSE F].
4 Press [RECORD] repeatedly to select the
desired recording length.
RECORD
• During the rec-pause mode, five
C
marks appear on the TV screen. Each
C
mark represents one minute.
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to prevent damage
to the tape and the video head.
REC
OTR(8:00)
OTR(7:30)
5 To stop recording
6 To eject the
recorded cassette
Hint
OPEN/CLOSE
/EJECT
• If you want to watch one channel while recording another...
1) If noise appears on the TV screen, press [VCR/TV] to put the unit in TV position.
2) You cannot record one channel while watching another if you have a cable box or satellite receiver.
STOP
Timer Recording
VCR
Select the desired date.
Then press [B] to go to next step.
•
Insert a tape with its record tab into the unit.
4
5
Press [MENU], then select “TIMER PROGRAMMING”.
ONE TIME PROGRAM
PROGRAM NUMBER
1
or
- M E N U -
TIMER PROGRAMMING
1
DATE
1 0 / 2 3 MON
B TIMER PROGRAMMING
PROG
DATE
START TIME
END TIME
CHANNEL
REC SPEED
12345678
MENU
START TIME – – : – – – –
END TIME – – : – – – –
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
CHANNEL
– –
LANGUAGE SELECT
REC SPEED – –
or
Available program number flashes.
• You can set a program one year in advance.
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE – – / – –
1
2
3
Select the desired start time (hour).
START TIME – – : – – – –
END TIME – – : – – – –
Then press [B] to go to next step.
CHANNEL
– –
REC SPEED – –
or
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 1 0 / 2 3 MON
or
1
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
Then press [B] to go to next step.
CHANNEL
– –
PROGRAM NUMBER
1
REC SPEED – –
B
ONCE
DAILY
WEEKLY
or
or
–
–
12
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select “AM” or “PM”.
Then press [B] to go to next step.
Press [SUBTITLE/T-SET] to set timer standby mode.
6
10
SUBTITLE
ONE TIME PROGRAM
PROGRAM NUMBER
T-SET
1
DATE
1 0 / 2 3 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
• TIMER indicator on the front panel lights up. The unit will
change to the DVD mode.
or
CHANNEL
– –
REC SPEED – –
AM
B PM
Hint
Repeat the procedure in steps 5 and 6 to set the end time.
• To go back one step, press [s] during steps 3 to 9.
7
8
To Check, Correct or Cancel a Timer Program
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote
Select the desired channel.
Then press [B] to go to next step.
ONE TIME PROGRAM
control.
PROGRAM NUMBER
1
2) Select main menu by pressing [MENU]
3) Select “TIMER PROGRAMMING” by using [K/L], then
press [B].
.
DATE 1 0 / 2 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
or
CHANNEL
1 6
REC SPEED – –
4) Select the program number which you want to check by
using [K/L]. The details of the program you selected will
appear on the TV screen.
• If you have connected the unit to a cable box or satellite
box as the connection on page 6, select the VCR to
channel 3 or 4 (the RF output channel of the VCR). Then,
select the desired channel at the cable box or satellite box.
Leave the cable box or satellite box on for Timer Recording.
•
Go to the digit you want to change by using [s/B].
Then, enter correct numbers by using [K/L].
You may cancel the entire program by pressing [s]
while the program number blinks.
•
Select the desired recording speed, then press
9
5) Press [CLEAR/C.RESET] to exit.
6) Press [SUBTITLE/T-SET] to return to timer standby
mode.
[CLEAR/C.RESET].
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
1
CLEAR/
C. RESET
1 0 / 2 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
or
CHANNEL
1 6
REC SPEED SP
To cancel a Timer Recording in progress
B SP
SLP
Press [STOP/EJECT
C
A] on the unit.
• To set another program after step 9, press [B].
Then, continue with step 2.
Hints for OTR and Timer Recording
• Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR
mode, then press [SUBTITLE/T-SET].
• If a tape is not in the unit or does not have the record tab, TIMER indicator on the front panel blinks and Timer Recording
cannot be performed. Please insert a recordable tape.
• When Timer Recordings are set, TIMER indicator on the front panel lights up. To use the VCR as usual until the time for the
recording, press [SUBTITLE/T-SET] so that TIMER indicator light turns off. Press [VCR/TV] to choose the VCR position.
Select either VCR or DVD mode, then continue with the other features as described in this manual.
After an OTR or a Timer Recording has been set, this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET] on the
remote control or [STOP/EJECT
C
A] on the unit, then press [VCR] to activate the VCR function again.
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then
press [VCR] to activate the VCR function again.
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after
you canceled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you
operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,
and TIMER indicator on the front panel lights to indicate the unit is in the timer standby mode.
• TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be
unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.
•
Press [STOP/EJECT
C
A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is
off.
• Press [SOURCE] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer
Recording is in standby mode, press [STOP/EJECT A] on the front panel or [SUBTITLE/T-SET] on the remote control,
C
and then press [SOURCE] on the front panel or [VCR] on the remote control.
If you want to use the DVD player during a Timer Recording or while TIMER indicator on the front panel is on or blinking.
• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the
other DVD features as described in this manual.
NOTE (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.
–
–
13
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV)
(Back of another source)
(Back of DVD/VCR*)
DVD/VCR
AUDIO OUT
VCR
2
AUDIO OUT
1
or
ANT-IN
L
Connect
AUDIO IN
VIDEO IN
Connect
R
VIDEO OUT
VIDEO OUT
ANT-OUT
RF cable
(supplied)
*Front input jacks are also available
Audio/Video cables
(commercially available)
7) To stop recording, press [STOP/EJECT
C
A] on the
1) Insert a pre-recorded tape into another VCR for playing.
recording unit, then stop playback of the tape in another
source.
2) Insert a tape with its record tab into this unit for recording.
3) Press [SPEED] on the remote control of the recording
unit to select the desired recording speed (SP/SLP).
4) Select the “L1” or “L2” position on the recording unit.
Hint
• For best results during dubbing, use the front panel controls
whenever possible. The remote control might affect another
source’s operation.
• To use the input jacks on the back of this unit, select
“L1” position by pressing [0], [0], [1] on the remote
control or [CHANNEL
K
/L
]
on this unit.
• Always use video-quality shielded cables with RCA-type
connectors. Standard audio cables are not recommended.
• You can use a video disc player, satellite receiver or other audio/
video component with Audio / Video outputs.
• “L1” or “L2” is found before the lowest memorized channel.
(Example: CH02)
• To use the input jacks on the front of this unit, select
“L2” position by pressing [0], [0], [2] on the remote
control or [CHANNEL
K/L] on this unit.
5) Press [RECORD] on the recording unit.
6) Begin playback of the tape in another source.
• “L2” input jacks are on the front of this unit.
–
–
14
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Functions
Playback
Before: Turn on the TV, amplifier and any other components which are connected to this unit.
Make sure the TV and audio receiver (commercially available) are set to the correct channel.
1
2 2 4 3
DVD
⇒
Page 16
(
)
OPEN/
CLOSE
VCR
DVD
P-SCAN
PLAY
1
2
3
4
Press [STANDBY-ON] to turn on the DVD/CD Player.
Press [OPEN / CLOSE] and insert a disc with label facing up.
Press [PLAY B ] to start playback.
REC
TIMER
VIDEO
STANDBY-ON
AUDIO
REW
F.FWD
STOP/EJECT
PLAY
RECORD
IR
SOURCE
PREV
STOP
PLAY
CHANNEL
2
Press [STOP C ] to stop playback.
OPEN/CLOSE
/EJECT
STANDBY-ON
TIP: You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to page 20.)
SPEED
AUDIO
1
2
1
4
7
2
5
8
3
6
9
Hint
•
•
•
•
SKIP/CH.
• When you play an MP3 file, details on page 16.
VCR/TV
SLOW
A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.
Some DVDs may be played from title 2 or 3 due to specific programs.
The operation may vary when you playback DVDs with disc menu or Video CDs with PBC. Refer to the manual accompanying the disc for details.
During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is
being switched to the 2nd layer. This is not a malfunction.
0
VCR
+10
DVD
DISPLAY
PAUSE
3
4
PLAY
STOP
Canceling and Calling Back PBC Function
Fast Forward / Reverse Search
DVD
E
1
Insert a Video CD and press [STOP C], and then press the Number
buttons to enter the desired Track number. PBC function is now
canceled and the playback of the Video CD will start. To call back
PBC function, press [STOP C] twice, and then press [PLAY B].
Press [h] or [g] repeatedly during playback to
select the required forward or reverse speed.
To use [PREV H ], [NEXT G] on this unit
Pressing and holding [PREV H ] or [NEXT G] on this unit
will also change forward or reverse playback speed.
Hint
• The title menu will appear on the display depend on the disc.
To continue playback, press [PLAY B].
DVD menu
Hint
• For DVDs, fast forward or reverse search speed is different
depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20),
4(x50), 5(x100).
• For Audio CDs, Video CDs and MP3, approximate speed is 1(x2),
2(x8), 3(x30).
Some discs contain menus which allow you to customize DVD playback.
Press [K / L / s / B ] to select an item, then press [ENTER] (or [PLAY B]).
Calling up a Menu Screen during Playback
Slow Forward / Reverse
DVD
1
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Press [h] or [g] repeatedly in the pause
mode to select the required forward or reverse speed.
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
To use [PREV H ], [NEXT G] on this unit
Pressing and holding [PREV H ] or [NEXT G] on this
unit in the pause mode will also change forward or reverse
playback speed.
Resume
DVD
To continue playback, press [PLAY B].
Press [STOP C] during playback. Resume
Resume ON
Hint
message will appear on the TV screen.
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8), 3(1/2).
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Press [PLAY B], playback will resume from
the point at which playback was stopped.
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 20-21.)
• Only slow forward is available when playing a Video CD and discs.
<Example : DVD>
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• For MP3, playback will resume from the beginning of the track at
which playback was stopped.
Zoom
DVD
• The resume information stays on even when the power is turned off.
•
Some Video CDs with the PBC function resume playback from the beginning of the track.
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
Paused and Step-by-Step Playback
DVD
x2
x4
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
DVD
3) Press [K / L / s / B] to slide the zoomed picture across
the screen.
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
4) To exit zoom mode, press [ZOOM] to select OFF.
To continue playback, press [PLAY B].
Hint
Hint
• Zooming function does not work while the disc menu is displayed.
• x4 zoom is not available on some discs.
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the pause mode are blurred. (Refer to pages 20-21.)
• The picture may be distorted when you press [PAUSE k] or [h]
repeatedly in the zoom mode.
• In the zoom mode, it automatically changes
zoomed position guide.
• Only x2 zoom is available on Video CDs.
x2(x4) to the
To use [PREV H ], [NEXT G] on this unit
DVD
Press once to skip chapters or tracks to a desired point.
–
–
15
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.
DVD
Hint
• Some selections may take a while to be recognized.
Insert an MP3-format disc, then the file list will automatically
appear on the TV screen. Press [MENU] when you want to call
up the file list if MP3-format disc is already inserted.
• Press [TOP MENU] to return to the first item.
• Folders are known as Groups; files are known as Tracks.
• Folders and MP3 are displayed respectively as
• A maximum of 255 folders or 999 files may be recognized on one
disc.
• Up to 8 hierarchies can be recognized in one folder. File in the 9th
or deeper hierarchies cannot be played back.
This player recommends the files recorded under the following
circumstances:
3
and
.
When selecting the folder:
FILE LIST
1
DISC NAME
FOLDER
MP3
3
folder name
folder name
folder name
1
2
3
4
ENTER
folder name
3
file name
file name
file name
1
2
3
or
PLAY
3
3
ENTER
PLAY
1/
2
folder name
1
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 32kbps ~ 320kbps
• For MP3 file recorded in Variable Bit Rate(VBR), the unit may not
display the actual elapsed time.
• Press [B] when you want to go to the next hierarchy.
• Press [s] when you want to go back to the previous hierarchy
(except for the top hierarchy).
To cancel MP3 playback, press [STOP C].
2
STOP
Refer to “Resume” on page 15.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DVD
Angle icon appears only in a case
multi-angel is available on the DVD.
DISPLAY
DISPLAY
Current playback status
Current playback status
4/12 0:03:21 - 0:02:15
11/16 0:00:00 - 0:03:30
T
1
2
3
1
2
Remaining time of the current track
Elapsed time of the current track
Remaining time of the current chapter
Elapsed time of the current chapter
TR(Track):
DISPLAY
Current track number / Total tracks
CH(Chapter):
Current chapter number / Total chapters
DISPLAY
ALL:
Current track number / Total tracks
4/12 0:13:45 - 0:45:40
T
Current repeat setting, if active
T: Track repeat
1/3 0:00:00 - 1:23:45
Remaining time of the current title
Elapsed time of the current title
A: All Tracks repeat
B: A-B repeat
A
Remaining time of the entire disc
Elapsed time of the entire disc
TT(Title):
Current title number / Total titles
DISPLAY
DISPLAY
Layer numbers, appears only when
playing a two-layered disc.
L0: Layer 0 is playing
3
T
L1
Hint
L1: Layer 1 is playing
•
For the Audio CDs, when you are playing a disc in PROGRAM or RANDOM
2
mode,
PROGRAM (or RANDOM) will be displayed instead of
.
Current repeat setting, appears only
when the repeat setting is active.
C: Chapter repeat
•
PBC is displayed when you play the Video CD with PBC function.
T: Title repeat
B: A-B repeat
DVD
A
DISPLAY
BIT RATE: The amount of audio and
video data currently being read
DISPLAY
Current playback status
TRACK 01
1
2
The name of the file currently in play
4
DISPLAY
will be displayed.
TR(Track):
Current track number / Total tracks
1/36 0:01:15
T
Current repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
DISPLAY
Elapsed playing time of the current track
PROGRAM
RANDOM
3
4
or
(Only when you are playing a disc in PROGRAM or RANDOM mode.)
DISPLAY
–
–
16
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Functions
SEARCH MODE does not work during Programmed or Random Playback.
Using Track Search
Using Time Search
DVD
DVD
Press [SEARCH MODE].
Press [SEARCH MODE] repeatedly until the Time Search
1
1
2
SEARCH
MODE
display appears.
/29
SEARCH
TOTAL 1:29:00
MODE
PLAY
Select track number by using the Number buttons within 30 seconds.
2
Select a desired disc time by using the Number buttons within 30
1
4
7
2
5
8
0
3
seconds.
1
4
7
2
5
8
0
3
6
9
6
/29
TOTAL 1:29:00
9
+10
• For the disc with less than 10 tracks, press the track number directly.
• For discs with more than 10 but less than 99 tracks, to play single-
digit track, press [0] first, then the track number (e.g. for track 3,
press [0], [3]). To play a double-digit track, press the track number.
• For discs with more than 100 tracks, to play a single or a double-
digit track, press [0] first, then the track number (e.g. for track 3,
press [0], [0], [3], and for track 26, press [0], [2], [6]). To play a
triple-digit track, press the track number.
Hint
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the Time Search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.
•
Time Search is not available when you play the Video CD with PBC function.
• For Audio CDs, Time Search is not available for Program and
Random Playback.
Using [SKIP/CH. G/o, H/p]
Press [SKIP/CH. G/o, H/p] during playback.
Marker Setup
1
Current Track
DVD
(TR)
SKIP/CH.
PLAY
TR 1 TR 2 TR 3 TR 4
This feature allows you to assign a specific point on a disc to be
called back later.
SKIP
SKIP
Hint
To set a marker
• [+10] can also bring the Track search display, except for the disc
with less than 10 tracks. For such a disc, track search can be done
by just pressing the track number.
Press [SEARCH MODE] repeatedly until the marker display
1
appears.
SEARCH
MODE
• For Audio CDs and MP3, Track Search is not available for Program
and Random Playback.
PLAY
•
Track Search is not available when you play the Video CD with PBC function.
Select a marker.
2
Using Title / Chapter Search
or
DVD
Press [ENTER].
3
ENTER
Press [SEARCH MODE] once for the Chapter Search.
Press [SEARCH MODE] twice for the Title Search.
1
SEARCH
MODE
/12
To return to the marker later
PLAY
Press [SEARCH MODE] repeatedly until the marker display
1
appears.
SEARCH
MODE
Select title/chapter number by using the Number buttons
within 30 seconds.
2
1
4
7
2
5
8
0
3
Select the marker.
6
2
/12
9
or
+10
Press [ENTER] at the desired marker.
3
Using [SKIP/CH. G/o, H/p]
ENTER
Press [SKIP/CH. G/o, H/p] during playback.
1
Current Chapter
(CH)
To exit the marker screen
CH 1 CH 2 CH 3 CH 4
SKIP/CH.
RETURN
PLAY
Press [RETURN ].
SKIP
SKIP
1
or
Current Title
(TT)
Hint
TT 1 TT2 TT3 TT4
•
•
The Marker display will disappear in about 30 seconds when there is no output.
To clear a marker, select the marker to be cleared at step 2 in the section
“To set a marker” or “To return to the marker later” and then press
[CLEAR/C.RESET].
SKIP
SKIP
(If the disc has no chapters)
Hint
• Opening the disc tray or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To
return to the marker later” will also erase all markers.
• Depending on the disc being played, this function can also be
performed by directly entering the desired chapter number with the
Number buttons. Refer to the manual accompanying the disc.
•
Marker Setup is not available when you play the Video CD with PBC function.
–
–
17
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Random Playback
DVD
DVD
Repeat function is available only during playback.
This function shuffles the playing order of tracks instead
of playback in sequence.
Press [REPEAT] during playback.
1
Press [MODE] twice.
RANDOM
1
CD-DA
TOTAL 0:45:55
REPEAT
PLAY
MODE
RANDOM PROGRAM
--no indication--
STOP
PLAY
<Example : DVD>
<Example : CD>
Each time you press [REPEAT] repeat function changes as
example below.
Press [PLAY B] to start Random Playback.
2
(repeat off)
OFF
PLAY
(current chapter repeat)
(current title repeat)
(repeat off)
CHAPTER
TITLE
OFF
Hint
• To repeat the current track in the random selections, press
[REPEAT] repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT]
repeatedly until “ ALL” appears during playback.
• During random playback, you cannot go back to the previous track.
(current track repeat)
(entire disc repeat)
TRACK
ALL
Programmed Playback
DVD
OFF
(repeat off)
You may determine the order in which tracks will play.
TRACK
GROUP
ALL
(current track repeat)
(current group repeat)
(entire disc repeat)
Press [MODE] once.
1
CD-DA
TOTAL 0:00:00
MODE
STOP
<Example : CD>
Hint
Using [K/L] to select desired track.
• Repeat setting (except “ALL”) will be cleared when moving to
another title, chapter, track or group.
2
3
Press [ENTER].
CD-DA
TOTAL 1:03:30
1
5
3:30
5:10
ENTER
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
• Repeat playback are not available with some discs or during repeat
A-B playback.
• Repeat playback is not available when you play the Video CD with
PBC function.
or
• Up to 99 tracks can be ordered.
• If eight or more tracks were in a program, use
[SKIP/CH. / G//K , H//L] to see all the tracks.
Repeat A-B Playback
• While an MP3 folder is open:
–Press [B] when you want to go to the next hierarchy.
–Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
DVD
Repeat function is available only during playback.
Press [PLAY B] to start Programmed Playback.
Press [A-B] at your desired starting point (A).
1
A-
A-B
PLAY
PLAY
Hint
• Press [CLEAR/C.RESET] at step 2 to erase the most recently
entered track.
Press [A-B] at your desired ending point (B).
2
• To erase all programmed tracks at once, select “ALL CLEAR’’ and
press [ENTER] at step 2.
A-B
A-B
• While a program is being played back, [STOP C] works as follows;
⇒
Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts. (CD playback restarts from the current point.
MP3 playback restarts from the beginning of the current track.)
Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However, your
programmed playback can be restarted when you follow the
above steps. (Your programs are still stored until either the disc
tray is open or power is turned off.)
• Point B should be in the same title or track as point A.
Hint
⇒
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function does not work in the other repeat modes.
• The A-B Repeat section can only be set within the current title (for
DVDs), or current track (for Audio CDs, Video CDs).
• To repeat the current track in the program, press [REPEAT]
repeatedly until appears during playback.
“
TRACK’’
• To repeat the entire program, press [REPEAT] repeatedly until
ALL’’ appears during playback.
“
–
–
18
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Subtitle Language
Camera Angle
DVD
DVD
This unit allows you to select a subtitle language (if available)
during DVD playback.
Some DVD discs may contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle if the angle icon appears on
the screen. If the “ANGLE ICON” setting is “OFF” in the OTHERS
menu, the angle icon will not appear. (Refer to pages 20-22.)
Press [SUBTITLE/T-SET] during playback.
1
SUBTITLE
1.ENG/6
T-SET
PLAY
Press [ANGLE] during playback.
1
1 / 8
ANGLE
Each time you press [SUBTITLE/T-SET], subtitle language
changes as example below.
PLAY
OFF
ENG
FRE
(no subtitles)
Black Level Setting
(English subtitles)
(French subtitles)
DVD
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
Press [MODE] during playback.
1
ON
MODE
PLAY
To set subtitle ON/OFF
Press [SUBTITLE/T-SET] during playback.
Press [ENTER] to
adjust the black level.
ENTER
1
OFF
2
SUBTITLE
1.ENG/6
T-SET
PLAY
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
Press [B] to select subtitle ON or OFF.
2
RETURN
Press [RETURN
] to exit.
3
OFF
Stereo Sound Mode
Hint
•
If your language is not shown after pressing [SUBTITLE/T-SET] several
times, the disc may not have that language. However, some discs have
the subtitle language setting on the disc menu. (Operation varies depend-
ing on the discs, so refer to the manual along with the disc.)
DVD
This unit allows you to select a
sound mode during CD playback.
Press [AUDIO] during CD playback.
1
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has a three- letter-language code,
the code will be displayed every time you change the subtitle
language setting. If you choose any other languages, ‘---’ will be
displayed instead. (Refer to page 24.)
STEREO
AUDIO
PLAY
Each time you press [AUDIO], sound mode changes as example below.
• Some discs will only allow you to change the subtitle from the disc
menu. Refer to the manual accompanying the discs for details.
STEREO
L-ch
(right and left channels are active)
(left channel is active)
Audio Language
DVD
R-ch
(right channel is active)
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
Virtual Surround
DVD
Press [AUDIO] to change audio language.
1
AUDIO
1.ENG Dolby D 3/2.1ch 48k/3
You can enjoy stereophonic virtual world on your existing 2
channel stereo system.
PLAY
Press [MODE] twice (once for Audio CD and MP3) during playback.
1
Each time you press [AUDIO], the audio language changes as
example below.
OFF
MODE
PLAY
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
Press [ENTER] for the desired effect.
2
ENTER
1
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
RETURN
Press [RETURN
] to exit.
3
Hint
• Some discs will only allow you to change the audio setting from the
disc menu. Refer to the manual accompanying the discs for details.
Hint
•
When “OFF” appears on the TV screen, it means audio language is not available.
•
Virtual Surround will not be effective if the sound mode is set to something other than
“STEREO” (for Audio CD and Video CD playback only). Refer to “Stereo Sound Mode”.
• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language. However, some discs
allow audio language setting on the disc menu. (Operation varies
depending on the disc, so refer to the manual along with the disc.)
• When playing back 96kHz with Virtual Surround function, the sound
will be down sampling at 48kHz and output as digital audio.
–
–
19
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD Setup
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
Press [SETUP] in the stop mode.
2
Select the desired item.
ENTER
SETUP
or
STOP
SETUP
QUICK
ENGLISH
<SETUP MENU>
A
B
C
P20
P21
P21
Step 5
Step 5
Step 5
Confirm that “QUICK” is selected.
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
4:3 LETTER BOX
OFF
BITSTREAM
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
•
Refer to the sections “PLAYER MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY DIGITAL” section on page 20 or 21.
CUSTOM Menu
You can change the settings of the unit.
QUICK
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
•
ENTER
1
Press [SETUP] in the stop mode.
2
Select “CUSTOM”.
3
Select the desired item.
SETUP
ENTER
STOP
or
or
<SETUP MENU>
SETUP
CUSTOM
SETUP
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
LANGUAGE menu
OTHERS menu
DISPLAY menu
AUDIO menu
PARENTAL menu
SETUP
LANGUAGE
SETUP
DISPLAY
SETUP
PARENTAL
SETUP
OTHERS
SETUP
AUDIO
PASSWORD
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
ANGLE ICON
AUTO POWER OFF ON
ON
DRC
ON
Please enter a 4-digit password.
SUBTITLE
DISC MENU
PLAYER MENU
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
page 20
A
page 21
B
page 21
C
page 22
D
page 22
E
LANGUAGE Setting
Follow steps 1 to 3 in the “CUSTOM Menu” section on above.
A
ENTER
5
Select the desired language.
4
Select the desired item.
6
To exit the menu
SETUP
ENTER
or
or
AUDIO: *1 *2
(Default: ORIGINAL)
Sets the audio language.
LANGUAGE menu
Hint
AUDIO
ORIGINAL
ENGLISH
FRENCH
*1
SETUP
LANGUAGE
• Language options are not available with
some discs.
AUDIO
ORIGINAL
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
ENGLISH
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle language.
• If OTHER is selected on the AUDIO,
SUBTITLE or DISC MENU screen,
press four-digit number to enter the code
for the desired language. (Refer to the
language code list on page 24.)
• Only the languages supported by the
disc can be selected.
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: *1
(Default: ENGLISH)
Sets the language for
DVD menu.
Hint
DISC MENU
ENGLISH
FRENCH
•
In QUICK SETUP Menu,
SPANISH
“PLAYER MENU”, “TV ASPECT”
“PROGRESSIVE”, or “DOLBY
DIGITAL” are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
*2
QUICK
PLAYER MENU
:
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
•
Language Setting for Audio and Subtitle
are not available with some discs. Then
use [AUDIO] and [SUBTITLE/T-SET].
Details are on page 19.
(Default: ENGLISH)
Sets the language for the
On-screen display.
QUICK
mark, You can make all
–
–
settings in CUSTOM Menu.
20
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
6 To exit the TV ASPECT
4
Select the desired item.
5
QUICK
TV ASPECT:
or STILL MODE screen
(Default: 4:3 LETTER BOX)
See Hint on the right.
Select the
desired
setting.
SETUP
or
TV ASPECT
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
ENTER
DISPLAY menu
OFF
To complete the
PROGRESSIVE setting
or
SETUP
DISPLAY
ENTER
STILL MODE:
(Default: AUTO)
See Hint on the right.
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
Select the
desired
setting.
STILL MODE
ENTER
Hint
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
TV ASPECT:
PROGRESSIVE OFF
Hint
ENTER
• Select “4:3 LETTER BOX”,
so that black bars may
appear on the top and
bottom of the screen.
• Select “4:3 PAN & SCAN”
for a full height picture with
both sides adjusted.
or
PROGRESSIVE:
• You can set “PROGRESSIVE”
to “OFF” in the DISPLAY menu
or press and hold [PLAY B]
on the front of the unit for
more than 5 seconds during
playback, until the P-SCAN
indicator light on the front
panel turns off.
• When “PROGRESSIVE”
is “ON”, video signals from
the unit’s VIDEO OUT and
S-VIDEO OUT jacks will be
distorted or not be output at all.
QUICK
PROGRESSIVE:
(Default: OFF)
See Hint on the left.
• Select “16:9 WIDE” if a
wide-screen TV is
connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”,
automatically select the best
resolution setting (FRAME
or FIELD) based on the
data characteristics of the
pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
An individual picture on the
TV screen is called a “frame”,
which consists of two separate
images called as “field”.
• Some pictures may be
blurred if you select “AUTO”
in the still mode due to their
date characteristics.
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
4:3 LETTER BOX
AUTO
ON
SETUP
ENTER
If there is no picture
or you do not press
any buttons for 15
seconds, Progressive
scan will switch to
“OFF” and it will exit
the setup menu.
Before proceeding…
Select “Yes”.
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
or
Activate Progressive?
NO
Hint
YES
SELECT:
K
/
L
SET:ENTER
•
In QUICK SETUP Menu,
“PLAYER MENU”, “TV ASPECT”
“PROGRESSIVE”, or “DOLBY
DIGITAL” are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
ENTER
•
Select “Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
QUICK
mark, You can make all
or
NO
YES
settings in CUSTOM Menu.
SET:ENTER
SELECT:
K
/
L
AUDIO Setting
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the “CUSTOM Menu” section on page 20.
5
6 To exit the menu
4
Select the desired item.
DRC (Dynamic Range Control):
(Default: ON)
SETUP
Set to “ON” to compress the range between soft and loud sounds.
or
DRC
ON
OFF
DOWN SAMPLING ON
ON
BITSTREAM
Hint
DOLBY DIGITAL
BITSTREAM
AUDIO menu
ENTER
DRC:
SETUP
AUDIO
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
Set to “OFF” when outputting the original sound.
DOWN SAMPLING:
• When playing back a
96kHz disc with the copy-
right protection, or when
Virtual Surround is set to
“1” or “2”, the sound will be
down sampled at 48kHz
and output as digital audio
even if the “DOWN SAM-
PLING” is set to “OFF”.
• This function is available
only on digital output-
ting of a disc recorded in
96kHz.
DRC
ON
ON
OFF
BITSTREAM
DOWN SAMPLING ON
DOLBY DIGITAL
Hint
BITSTREAM
•
In QUICK SETUP Menu,
ENTER
“PLAYER MENU”, “TV ASPECT”
“PROGRESSIVE”, or “DOLBY
DIGITAL” are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
QUICK
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
QUICK
mark, You can make all
settings in CUSTOM Menu.
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
ON
PCM
ENTER
–
–
21
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4
Enter your desired four-digit
password.
5
Select “PARENTAL
LEVEL”.
6
Select the desired
level.
7
To exit the menu
ENTER
ENTER
ENTER
SETUP
1
4
7
2
5
8
0
3
6
9
or
or
PARENTAL LEVEL
ALL
PARENTAL LEVEL
PASSWORD CHANGE
ALL
8 [ADULT]
7 [NC-17]
6 [R]
PARENTAL menu
CONTROL LEVELS
• ALL:
All parental locks are canceled.
DVD software of any grades (adult/general/children) can be played back.
SETUP
PARENTAL
• Level 8:
PASSWORD
• Levels 7 to 2: Only DVD software intended for general use and children can be played back.
Please enter a 4-digit password.
• Level 1:
Only DVD software intended for children can be played back, with those
intended for adult and general use prohibited.
TIPS FOR LEVELS
• 8 [ADULT]:
• 7 [NC-17]:
• 6 [R]:
DVD software of any grades (adult/general/children) can be played back.
No one under 17 admitted
or
Restricted; under 17 requires accompanying parent or adult guardian
Parental Guidance Recommended
Unsuitable for children under 13
Parental Guidance suggested
If you have set a password
already, enter the current
four-digit password.
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
SETUP
PARENTAL
• 2 [G]:
General Audience
PASSWORD
• 1 [KID SAFE]: Suitable for children
Enter current password.
Hint
• DVD-Video discs may not respond to the parental lock settings. Make sure this function
works with your DVD-Video discs.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4
Enter current four-digit
password.
5
Select “PASSWORD
CHANGE”.
6
Enter your new
four-digit password
(except for 4737).
7
To exit the menu
ENTER
ENTER
SETUP
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
or
Hint
PARENTAL LEVEL
PASSWORD CHANGE
ALL
• Record the pass-
word in case you
forget it.
•
If you forget the
PARENTAL menu
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password. Password
will be cleared and
parental levels will
be set to “ALL”.
SETUP
PARENTAL
PASSWORD
Enter current password.
OTHERS Setting
E
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4
Select the desired item.
5
6
To exit the menu
ANGLE ICON:
(Default: ON)
SETUP
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
or
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
OTHERS menu
SETUP
OTHERS
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after 30 minutes
of no use.
ANGLE ICON
ON
AUTO POWER OFF
ON
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
ENTER
–
–
22
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset to the Default Setting (Except for PARENTAL Setting)
1
Press [SETUP] in the
2
Select “INITIALIZE”.
3
Select “YES”.
4
To exit the
menu
stop mode.
SETUP
SETUP
STOP
or
or
ENTER
ENTER
<SETUP MENU>
Press
twice.
SETUP
SETUP
INITIALIZE
SETUP
Hint
•
If you do not wish
QUICK
CUSTOM
INITIALIZE
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
to initialize at step
3, select “NO”.
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to the
remote control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the
remote control.
• You have to be within 23 feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote
control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn the volume up, then if you hear some signal
sound from the radio in response to your pressing buttons on the remote control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared
light through the digital camera.
Poor picture or noise.
• Interference signal may be received. Change the position and orientation of the unit.
Timer recording is impossible.
• Make sure the Timer Recording is set correctly.
• Make sure TIMER indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].
• Make sure the VCR clock is set correctly.
Cannot go into record mode.
Playback picture is partially noisy.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR SOURCE light is lit.
• Adjust tracking control for a better picture by pressing [CHANNELL/K]] on the unit or [SKIP/CH. G/K, H/L] on the
remote control.
Cannot view a tape but the audio
is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback picture.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be seen
normally.
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
• Press [VCR].
•
Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR SOURCE light is lit, then set it to the TV posi-
tion by pressing [VCR].
Video or color fades in and out when • You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
making a copy of a video tape.
Cannot remove the tape.
No picture.
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD SOURCE light is lit. Then try other DVD features.
• Set PROGRESSIVE correctly. Turn it on only if your TV has progressive scan and you are using the Component Video con-
nections between the unit and the TV. Disable progressive scan for all other connections. (See page 7.)
Disc cannot be played.
No sound.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output
Distorted picture.
• This unit does not support DTS audio.
-This is not a malfunction.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See pages 20-21.
Audio or subtitle language does not
match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be
changed.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
Audio or subtitle language cannot
be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears on the
screen, prohibiting an operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
• When playing Video CDs with PBC function, some operations (e.g., select and track repeat) cannot be performed.
–
–
23
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Video Heads :
Four Heads
Output signal format :
NTSC color
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
21 W (standby: 3.8W)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
W : 17 1/8”
(435mm)
H : 3 11/16” (94mm)
D : 9 3/16”
Weight :
(233mm)
Approx 6.0lbs (2.7kg)
Language Code List
Language
Code
Language
French [FRE]
Frisian
Code
Language
Macedonian
Malagasy
Malay
Code
Language
Siswat
Slovak
Slovenian
Somali
Code
A-B
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
Hindi
Hungarian [HUN]
Basque
O-R
Bengali;Bangla
Bhutani
Bihari
I-K
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 19. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event
of defect in materials or workmanship as follows:
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
DURATION:
FOR
A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
PARTS: FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.
Certain parts are excluded from this warranty.
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
LABOR: FUNAI CORP. will provide the labor without charge for a period of
ninety (90) days from the date of original retail purchase.
IMPORTANT:
LIMITS AND EXCLUSIONS:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
ATTENTION:
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unau-
thorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, altera-
tion, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
To obtain warranty service, you must take the product, or deliver the product
freight prepaid, in either its original packaging or packaging affording an equal
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORPORATION
Customer Service
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
Tel :1-800-317-6062
19900 Van Ness Avenue, Torrance, CA 90501
–
–
24
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Conexiones
Consulte la “Basic TV Connection” en la página delantera
antes de utilizar esta unidad.
Pulse [B] para AJUSTE AUTO.
CA 01
3
1
AJUSTE AUTO
Canal de salida RF
Si el canal 3 se está utilizando para una transmisión,
1) Programe su televisor al canal 4.
Conecta el cable de la caja de canales de cable o la caja de
satélite en la toma ANT-IN de la unidad?
2) Inserte una cinta pregrabada en esta unidad.
3) Pulse [SOURCE] en la unidad para que se encienda la
luz VCR SOURCE.
• Si aparece ruido en la pantalla de TV, presione [VCR/TV]
en el mando a distancia.
4) Pulse una vez [PLAY B].
5) Después de unos segundos, pulse [PLAY B] en la uni-
dad durante 3 segundos.
• El canal de salida RF cambiará del canal 3 al canal 4 y
podrá ver una imagen reproducida.
• Cuando no aparezca una imagen en la pantalla del televi-
sor, repita el paso 4.
SI
NO
Si Pulse [MENU] para salir.
No Espere unos minutos.
Después del escaneo
• El sintonizador se detiene en el canal memorizado más bajo.
• Puede seleccionar sólo los canales memorizados en esta unidad
con [SKIP/CH. G//K, H//L] (o [CHANNEL K // L]).
• Si aparece nuevamente “AJUSTE AUTO” en la pantalla de TV,
verifique las conexiones de cable. Presione nuevamente [B].
6) Pulse [STOP C] para parar la reproducción.
Ajuste del reloj
5
VCR
Instalación de las pilas del control
remoto
2
MENU
1
- M E N U -
o
1
2
3
PROGRAMAR
AUTOREPETIR
AJUSTE CANAL
[OFF]
• Si no se ha ajustado el reloj,
aparece la pantalla AJUSTE DE
RELOJ cuando pulse [MENU]. En
este caso, vaya al paso 2.
B AJUSTE DE RELOJ
SELEC. IDIOMA
Seleccione el mes actual.
AJUSTE DE RELOJ
2
3
4
5
6
7
8
Conmutación VCR/DVD
3
MES
1 0
DIA
– –
AÑO
– – – –
/
HORA MINUTO AM/PM
– – – – – –
o
:
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
OPEN/
CLOSE
VCR
DVD
P-SCAN
PLAY
1
4
7
2
5
8
3
6
9
SOURCE
PREV
STOP
PLAY
NEXT
SKIP/CH.
CHANNEL
VCR/TV
SLOW
Seleccione el dia actual.
AJUSTE DE RELOJ
0
VCR
+10
DVD
MES
1 0
DIA
0 2
AÑO
– – – –
Botón VCR
Botón DVD
DISPLAY
PAUSE
/
HORA MINUTO AM/PM
– – – – – –
PLAY
o
:
STOP
Botón SOURCE
RECORD
MENU
VCR
DVD
ENTER
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
Seleccione el año actual.
AJUSTE DE RELOJ
SOURCE
Luz DVD SOURCE
Luz VCR SOURCE
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
MES
1 0
DIA
0 2
AÑO
2 0 0 6
/
HORA MINUTO AM/PM
– – – – – –
o
:
MODO VCR
Pulse [VCR] en el control remoto. (Compruebe que está encen-
dida la luz VCR SOURCE.)
Seleccione la hora actual.
AJUSTE DE RELOJ
MES
1 0
DIA
AÑO
MODO DVD
Pulse [DVD] en el control remoto. (Compruebe que está encen-
dida la luz DVD SOURCE.)
/
0 2 LUN 2 0 0 6
HORA MINUTO AM/PM
0 5 – – – –
o
:
Consejo
Seleccione los minutos actuales.
• Si pulsa sólo [SOURCE] en el panel frontal NO cambía el modo
del control remoto. DEBE seleccionar también el modo correcto en
el control remoto.
AJUSTE DE RELOJ
MES
1 0
DIA
AÑO
/
0 2 LUN 2 0 0 6
HORA MINUTO AM/PM
0 5 4 0 – –
o
:
Activación de la unidad por primera vez
4
VCR
Seleccione “AM” o “PM”.
AJUSTE DE RELOJ
MES
1 0
DIA
AÑO
/
0 2 LUN 2 0 0 6
HORA MINUTO AM/PM
o
0 5
:
4 0
P M AM
BPM
1
2
Encienda el televisor y sintonice al canal 3.
• Si el canal 3 se está utilizando para una
transmisión, vea la sección “Canal de salida RF”.
Para salir de la pantalla AJUSTE DE RELOJ
LANGUAGE SELECT
STANDBY-ON
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
o
–
–
25
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Modo DVD
Mode de grabadora de video
Reproducción de la
6
Disco/cinta
Botón
grabadora de vídeo
(Orden alfavético)
1
4
7
2
5
8
0
3
6
•Para seleccionar el canal.
•El botón +10 no tiene efecto
en el modo de grabadora de
vídeo.
Antes: Encienda el televisor
y cambie al canal 3.
• Si el canal 3 se está utilizando
para una transmisión, vea la
sección “Canal de salida RF”.
• Para seleccionar directamente •Para seleccionar directamente la
el capítulo o el título.
canción.
9
+10
•Para buscar en avance/
retroceso en un disco.
•Para buscar en avance/retroceso en
un disco.
•Para el avance/retroceso de
una cinta.
• Para empezar la reproducción •Para empezar la reproducción en
en avance/retroceso lento
durante el modo de pausa.
avance lento durante el modo de
pausa. (VCD)
VCR
A-B
•Para repetir entre los puntos •Para repetir entre los puntos A y B
A y B elegidos.
elegidos. (CD/VCD)
Para empezar la
reproducción
1
3
2
4
ANGLE
AUDIO
•Para seleccionar los ángulos
de la cámara en un disco.
•Para seleccionar el idioma de •Para seleccionar ESTÉREO, L-ch o
audio en un disco.
R-ch. (CD/VCD)
PLAY
•
Para borrar los marcadores. (CD/VCD)
•Para borrar los marcadores. •Para retirar el Nº de estado en la
•Para salir del menú de la
grabadora de vídeo.
•Para reponer el contador de
cinta.
CLEAR/
C. RESET
•Para borrar los números
entrados incorrectamente.
•Para borrar el punto para la
repetición A-B.
entrada de programa. (CD/MP3)
•Para borrar los números
entrados incorrectamente.
•Para borrar el punto para la
repetición A-B. (CD/VCD)
Para parar la
reproducción
Para expulsar
OPEN/CLOSE
/EJECT
STOP
DISPLAY
DVD
•Para indicar el modo de disco •Para indicar el modo de disco
actual. actual.
•Para indicar la hora actual,
contador de cinta y canal.
•Para seleccionar el modo de •Para seleccionar el modo de salida
salida de DVD.
de DVD.
•Para activar el mando a
distancia en el modo DVD.
•Para activar el mando a distancia en
el modo DVD.
•
•
•
Para seleccionar un
ítem en el menú de la
grabadora de vídeo.
Para avanzar al
siguiente menú de la
grabadora de vídeo.
Para volver un paso
durante el ajuste del
reloj y temporizador.
Reproducción de DVD/
CD
7
ENTER
•Para mover el cursor y deter- •Para mover el cursor y determinar
minar su posición.
su posición.
Antes: Encienda el televisor,
amplificador y otros equipos que
puedan estar conectados a esta
unidad. Asegúrese que el televisor
y el sintoamplificador de audio (de
venta en los comercios) están en el
canal correcto.
MENU
MODE
•Para llamar el menu en un
disco.
•Para llamar la lista de archivo.
(MP3)
•Para llamar el menú de la
grabadora de vídeo.
•
Para disponer el orden de reproducción
o la reproducción aleatoria. (CD/MP3)
•Para activar/desactivar el
nivel del negro.
•Para activar/desactivar el
envolvente virtual.
•Para activar/desactivar el
envolvente virtual.
•Para activar/desactivar el nivel del
negro. (VCD)
OPEN/CLOSE
/EJECT
•Para abrir o cerrar la bandeja •Para abrir o cerrar la bandeja del
•Para expulsar el videocasete
de la grabadora de vídeo.
DVD
del disco.
disco.
•Para hacer una pausa de
reproducción del disco.
•Para hacer una pausa en la
reproducción del disco.
•
Para hacer una pausa de la
PAUSE
reproducción o grabación de la cinta.
•Para avanzar la reproducción •Para avanzar la reproducción un
•Para avanzar la reproducción
un cuadro a la vez.
1
2
un cuadro a la vez.
cuadro a la vez. (VCD)
•Para empezar la reproduc-
ción del disco.
•Para empezar la reproducción del
disco.
•Para empezar la
reproducción de la cinta.
OPEN/CLOSE
/EJECT
PLAY
STANDBY-ON
RECORD
•Para empezar una grabaciòn
o una grabaciòn de un toque.
Ponga un disco con la
etiqueta hacia arriba.
•Para reproducir repetidamente una
canción o disco. (CD/VCD)
REPEAT
RETURN
•
Para reproducir repetidamente
un capítulo o título.
• Para reproducir repetidamente una
canción, grupo o disco. (MP3)
Para parar la
Para empezar
la reproducción
3
4
•Para volver a la operación
previa en el menú.
•Para volver a la operación previa en
el menú.
reproducción
•Para buscar un capítulo,
título u hora.
•Para colocar o buscar los
marcadores.
•Para buscar una canción.
•Para buscar la hora. (CD/VCD)
•Para colocar o buscar los
marcadores. (CD/VCD)
SEARCH
MODE
STOP
PLAY
•Para llamar el menú de
búsqueda de índice u hora.
SETUP
•Para llamar el menú de
programación de DVD.
•Para llamar el menú de
programación de DVD.
Control remoto
•Para cambiar de canal.
SKIP/CH.
SKIP/CH.
8
•Para saltar capítulos o titulo. •Para saltar canciones.
•
Para ajustar manualmente
elseguimiento durante la reproducción.
SLOW
OPEN/CLOSE
•Para ver la cinta en cámara
lenta.
STANDBY-ON
/EJECT
SPEED
AUDIO
SPEED
1
4
7
2
5
8
3
6
9
•Para seleccionar la velocidad
de grabación.
SKIP/CH.
VCR/TV
SLOW
STANDBY-ON
•Para encender o apagar la
unidad.
•Para encender o apagar la
unidad.
•Para encender o apagar la unidad.
0
VCR
+10
DVD
DISPLAY
PAUSE
•Para parar la reproducción o
grabación.
STOP
•Para parar la reproducción.
•Para parar la reproducción.
PLAY
SUBTITLE
T-SET
•
Para poner la grabadora de
vídeo en el modo de espera para
una grabación con temporizador.
STOP
•Para seleccionar subtítulos
en un disco.
RECORD
MENU
ENTER
•Para volver al archivo superior de la
jerarquía más alta en el programa y
en la lista de archivo. (MP3)
TOP MENU
VCR
•Para llamar el menú superior
en un disco.
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
•
•
Para seleccionar el modo de
salida de la grabadora de vídeo.
Para activar el mando a distancia en
el modo de la grabadora de vídeo.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
•Para seleccionar la posición
de la grabadora de vídeo o
posición del televisor.
VCR/TV
ZOOM
• Para seleccionar la posición de •Para seleccionar la posición de
DVD o posición del elevisor.
CD/MP3 o la posición del televisor.
•Para ampliar parte de la
imagen. (x2/x4)
•Para ampliar parte de la imagen.
(x2)(VCD)
–
–
26
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
Connections
Please refer to “Basic TV Connection” on the front page
Press [B] to start Auto Set Up.
1
CH 01
3
AUTO SET UP
before you use this unit.
RF Output Channel
If channel 3 has been already occupied for broadcasting,
1) Set your TV to channel 4.
Do you connect the cable from the cable box or the satellite box to
the unit’s ANT-IN jack?
2) Insert a pre-recorded tape into this unit.
3) Press [SOURCE] on the unit so that the VCR SOURCE
light is lit.
YES
NO
Yes Press [MENU] to exit.
•
If noise appears on the TV screen, press [VCR/TV] on the
No Please wait for a few minutes.
remote control.
4) Press [PLAY B] once.
After scanning...
5) After a few seconds, press and hold [PLAY B] on the
unit for 3 seconds.
• The RF output channel will change to channel 4 from
channel 3 and you will see a playback picture.
• When a picture does not appear on the TV screen,
repeat step 4.
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
• If “AUTO SET UP” appears on the TV screen again, check the
cable connections. Then, press [B] once again.
6) Press [STOP C] to stop playback.
Clock Set Up
5
VCR
Installing the Batteries for the Remote
2
Press [MENU] and select “CLOCK SET“.
Then press [B] to go to next step.
Control
- M E N U -
1
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
[OFF]
1
2
3
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when
you press [MENU]. In this case, go to step 2.
CLOCK SET
Select the current month.
Then press [B] to go to next step.
2
3
VCR/DVD Switching
MONTH DAY
1 0 – –
YEAR
– – – –
3
/
HOUR MINUTE AM/PM
– –
:
– –
– –
or
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
OPEN/
CLOSE
VCR
DVD
P-SCAN
PLAY
1
4
7
2
5
8
3
6
9
SOURCE
PREV
STOP
PLAY
NEXT
SKIP/CH.
CHANNEL
CLOCK SET
Select the current day.
Then press [B] to go to next step.
VCR/TV
SLOW
MONTH DAY
1 0 0 2
YEAR
– – – –
0
VCR
+10
DVD
/
VCR button
DVD button
DISPLAY
PAUSE
HOUR MINUTE AM/PM
– –
:
– –
– –
PLAY
or
STOP
SOURCE button
RECORD
MENU
VCR
DVD
ENTER
CLOCK SET
SETUP TOP MENU
RETURN
Select the current year.
Then press [B] to go to next step.
4
5
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
MONTH DAY
1 0 0 2
YEAR
/
2 0 0 6
SOURCE
DVD SOURCE light
VCR SOURCE light
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
HOUR MINUTE AM/PM
– –
:
– –
– –
or
VCR MODE
Select the current hour.
Then press [B] to go to next step.
Press [VCR] on the remote control. (Verify that the VCR SOURCE
CLOCK SET
MONTH DAY
1 0
YEAR
light is lit.)
/
0 2 MON 2 0 0 6
DVD MODE
Press [DVD] on the remote control. (Verify that the DVD SOURCE
light is lit.)
HOUR MINUTE AM/PM
or
0 5
:
– –
– –
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
Hint
6
7
8
MONTH DAY
1 0
YEAR
/
0 2 MON 2 0 0 6
• Pressing only [SOURCE] on the front panel DOES NOT switch the
mode of the remote control. You MUST select the correct mode on
the remote control.
HOUR MINUTE AM/PM
0 5
:
4 0
– –
or
CLOCK SET
Select “AM” or “PM”.
Turn on the Unit for the First Time
MONTH DAY
1 0
YEAR
4
/
0 2 MON 2 0 0 6
VCR
HOUR MINUTE AM/PM
or
0 5
:
4 0
P M AM
B PM
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for
broadcasting, see “RF Output Channel” section.
1
To exit the CLOCK SET screen
Select your language in the first time you turn on this unit.
2
Then press [B] to go to next step.
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
–
–
27
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
DVD mode
VCR mode
VCR Playback
6
Disc/Tape
Button
(Alphabetical order)
Before: Turn on the TV and
set it to channel 3.
• If channel 3 has been already
occupied for broadcasting, see
“RF Output Channel” section.
1
4
7
2
5
8
0
3
6
•To select channel.
•The +10 button has no
effect in VCR mode.
•To select chapter or title
directly.
•To select track directly.
9
+10
•To search forward/back-
ward through a disc.
•To begin slow forward/
reverse playback in the
pause mode.
•To search forward/backward
through a disc.
•To begin slow forward playback
in the pause mode. (VCD)
VCR
•To forward/backward a
tape.
Insert a video
cassette into this unit.
To start
playback
2
4
A-B
1
3
•To repeat between your
chosen point of A and B.
•To repeat between your chosen
point of A and B. (CD/VCD)
ANGLE
AUDIO
•To select camera angles
on a disc.
PLAY
•To select audio languages •To select STEREO,
on a disc.
L-ch or R-ch. (CD/VCD)
To stop
playback
To eject the
cassette
•To clear the markers. (CD/VCD)
•To remove status number in
program input. (CD/MP3)
•To clear the markers.
•To clear the numbers
entered incorrectly.
CLEAR/
C. RESET
•To exit the VCR Menu.
•To reset the tape counter.
OPEN/CLOSE
/EJECT
•To clear the numbers entered
STOP
•To cancel the point for A-B incorrectly.
repeat.
•To cancel the point for A-B
repeat. (CD/VCD)
DISPLAY
DVD
•To display the current disc
mode.
•To display the current time,
tape counter, and channel.
•To display the current disc mode.
DVD/CD Playback
•
To select the DVD output mode. •To select the DVD output mode.
7
•To activate the remote
control in DVD mode.
•To activate the remote
control in DVD mode.
Before: Turn on the TV, amplifier and
any other components which are
connected to this unit. Make sure the
TV and audio receiver (commercially
available) are set to the correct
channel.
•
To select an item
on the VCR Menu.
ENTER
•To advance to the
next VCR Menu.
•To go back one
step during clock
and timer setting.
•To move the cursor and
determine its position.
•To move the cursor and
determine its position.
MENU
MODE
•To call up the Menu on a
disc.
•To call up the file list. (MP3)
•To call up the VCR Menu.
•To arrange the playing order or
play randomly. (CD/MP3)
•To set virtual surround on/off.
•To set black level on/off. (VCD)
DVD
•To set black level on/off.
•To set virtual surround
on/off.
OPEN/CLOSE
/EJECT
1
3
2
•To open or close the disc
tray.
•To eject the video
cassette from the VCR.
•To open or close the disc tray.
OPEN/CLOSE
/EJECT
STANDBY-ON
•To pause tape playback or
recording.
•To advance playback one
frame at a time.
•To pause disc playback.
•To pause disc playback.
PAUSE
•To advance playback one •To advance playback one frame
frame at a time.
at a time. (VCD)
Insert a disc with
label facing up.
•To begin disc playback.
•To begin disc playback.
•To begin tape playback.
PLAY
To stop
playback
To start
playback
4
RECORD
•To start a recording or One
Touch Recording.
•To play a track or disc repeatedly.
(CD/VCD)
•To play a track, group or disc
repeatedly. (MP3)
STOP
REPEAT
RETURN
•To play a chapter or title
repeatedly.
PLAY
•To return to the previous
operation in menu.
•To return to the previous
operation in menu.
Remote Control
SEARCH
MODE
8
•To search chapter, title or •To search track.
•To call up the index or time
search menu.
time.
•To search time. (CD/VCD)
•To set or search the markers. (CD/VCD)
•
To set or search the markers.
OPEN/CLOSE
/EJECT
SETUP
STANDBY-ON
•To call up the DVD setup
menu.
SPEED
AUDIO
•To call up the DVD setup menu.
•To change channels.
•To adjust the tracking
manually during playback.
1
4
7
2
5
8
3
6
9
SKIP/CH.
SKIP/CH.
SKIP/CH.
•To skip chapters or titles.
•To skip tracks.
VCR/TV
SLOW
SLOW
• To view the tape in slow
motion.
0
VCR
+10
DVD
DISPLAY
PAUSE
SPEED
•To select the recording
speed.
PLAY
STANDBY-ON
STOP
•To turn the unit on/off.
•To stop playback.
•To turn the unit on/off.
•To stop playback.
•To turn the unit on/off.
RECORD
MENU
•To stop playback or
recording.
STOP
ENTER
SETUP TOP MENU
RETURN
SUBTITLE
T-SET
•To put the VCR into
standby mode for a Timer
Recording.
SEARCH
MODE
CLEAR/
•To select subtitles on a
disc.
MODE
ZOOM
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
•To return to the top file of the
highest hierarchy in the program
and file list. (MP3)
TOP MENU
VCR
•To call up the Top Menu
on a disc.
•
To select the VCR output mode.
•To activate the remote
control in VCR mode.
VCR/TV
ZOOM
•To select DVD position or •To select CD/MP3 position or TV •To select VCR position or
TV position.
position.
TV position.
•To magnify part of a
picture. (x2/x4)
•To magnify part of a picture.
(x2)(VCD)
Printed in China
E8CK0UD
1VMN23215 ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|