SXH2
Headphone Amplifier Module
Owners Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
This page has intentionally been left blank.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Introducing the
Perreaux Silhouette Series
Designed as a range of high quality, yet affordable modules; the
‘Silhouette’ series will compliment and enhance your existing
system.
Drawing on our extensive knowledge gained from more than a
quarter of a century of developing highest quality audio products,
the ‘Silhouette’ concentrates our legendary design and build
quality into a compact package without sacrificing performance.
The Perreaux ‘Silhouette’ series provides performance levels
never before seen in its class.
Key Features
àꢀClass A signal stages
àꢀHighest quality internal power supply featuring a custom
designed, fully shielded toroidal transformer and 22000µF
of smoothing capacitance
àꢀOptimal internal layout incorporating total separation
between channels
àꢀEnhanced audio design featuring highest quality PCB and
minimal internal wiring
àꢀGain selection switch
àꢀLine-out connections
àꢀHigh power output
àꢀStable down to 4Ω
àꢀDual stereo headphone jacks
àꢀCompact
àꢀStylish
T he P erreaux “S ilhouette” series takes you even closer to the
elusive goal of “T he P erfect R e-C reation of a M usical
E vent”.
From all of us at Perreaux Industries Limited, thank you for
choosing the Perreaux Silhouette Series SXH2 Headphone
Amplifier.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
Important Safety Instructions
Note:
Please read all instructions carefully before attempting to
operate your Perreaux “Silhouette” SXH2 Headphone
Amplifier.
ALWAYS switch off power to your system before attempting to
connect or disconnect cables.
ALWAYS disconnect your system from the mains before
attempting to clean your unit.
ALWAYS keep electrical equipment out of reach of children.
ALWAYS unplug sensitive electronic equipment during
electrical storms.
NEVER disconnect the mains earth from the system.
NEVER operate the SXH2 with the cover removed.
NEVER use any liquid inside the SXH2.
NEVER bypass any fuse.
NEVER attempt to repair the SXH2. In the event of a problem,
please contact your Perreaux dealer.
NEVER expose the SXH2 to extremely high or low
temperatures.
NEVER operate this product in an explosive atmosphere.ꢀ
4
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Table of Contents
i
Introducing the Perreaux Silhouette Series .................................... 3
Important Safety Instructions............................................................. 4
Table of Contents .................................................................................. 5
Unpacking and Placement .................................................................. 6
Instant Install .......................................................................................... 7
Front Panel Functions .......................................................................... 9
Rear Panel Functions ..........................................................................10
Special Design Philosophies..............................................................12
Special Design Features .....................................................................14
Care and Maintenance .......................................................................16
Warranty Information ........................................................................17
Extended Warranty Registration Form..........................................18
Troubleshooting Guide......................................................................19
Specifications........................................................................................21
Physical Dimensions............................................................................24
Contact Details.....................................................................................25
ii
iii
1
2
3
4
5
6
7
8
9
10
11
12
13
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Unpacking and Placement
Unpacking The SXH2 is packaged for maximum protection. To open, sit the
Procedure box upright and cut the reinforced tape at the top of the box. The
product can now be removed.
Pull the foam protecting end-caps off either side of the unit and
remove the black material covering.
The SXH2 Headphone amplifier is now unpacked and ready for
further installation.ꢀ
Note:
Please retain all packaging material for future transport.
Box 1 x SXH2 Headphone amplifier
Contents 1 x Product manual
3 x Performance analysis charts
1 x Detachable AC power cord
Placing Your The SXH2 should generally be placed close to your source
SXH2 equipment, thus keeping interconnect cabling between the SXH2
and associated components as short as practical. This will reduce
the systems susceptibility to radio frequency interference and the
negative effects associated with long cables.
Ventilation The SXH2 is a low power amplifier. Ventilation requirements
Requirements are not considered an important factor in product placement.
In the event that the SXH2 is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Physical Dimensions section of the manual (Chapter 12).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Instant Install
If you are like us, the first thing you will want to do is to play
your favourite piece of music through your new SXH2. The
following instructions are written to enable you to achieve this as
quickly as possible. These are not comprehensive instructions,
but are designed to enable you to play music now!ꢀ
Note:
Please take the time to read the SXH2 manual thoroughly
as it incorporates many features, which will enhance its
operation.
Placement
The SXH2 is a sensitive low power amplifier and best results
will be achieved when placed away from potential interference
from other components and electrical devices, for example AC
mains cords/outlets, transformers, high power amplifiers,
computers, etc.
Place the SXH2 close or near the source component in order to
make as short a connection as possible.
Turn off associated components
This minimises the potential to damage any other components
when connecting your SXH2 into the system.
Connect source to SXH2
Connect the audio output from the source component to the
inputs at the rear of the SXH2. Refer to Chapter 4 for Rear Panel
information.
Connect headphones to SXH2
Connect a set of headphones to one of the jacks on the front
panel. Refer to Chapter 3 for Front Panel information.
Note:
Make sure the nominal impedance of the headphones is
not lower than 8Ω.
Switch on SXH2
Insert the power cord supplied into the rear of the SXH2 and into
the wall. Switch on the socket at the wall and turn on the power
of the SXH2 by setting the power switch down.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution!
Prior to connecting the AC mains, please check the voltage
label on the rear panel to ensure that your unit conforms to
the power supply in your area. Never attempt to connect
the unit to the incorrect voltage.
Switch on source component
Power up your source component and start your favourite
recording. Slowly increase the SXH2 volume to achieve a
comfortable listening level.
CONGRATULATIONS!
Now that you have achieved your first objective, sit back, relax
and please read the rest of the manual at your own pace in your
favourite armchair whilst sipping a hot cup of coffee. You’ll find
the whole experience much more pleasurable whilst listening to
music.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Front Panel Functions
Power LED
This blue LED indicates the power status of your SXH2
headphone amplifier.
Headphone Jacks
Two 6.35mm (¼”) stereo headphone jacks are provided,
allowing a second person to enjoy the pure sound offered by the
SXH2. The construction of the jacks makes for effortless,
crackle and pop-free insertion, and will give a lifetime of
continuous contact performance.
Note:
Please ensure that the resulting impedance of the two
headphone sets is not below 8Ω. Use the following
equation to calculate the total impedance: RT = (R1 * R2) /
(R1 + R2).
Volume Control
The high-quality, machined aluminium knob is the sole user
interface, reminding the user at every touch of the superior build
quality designed into the SXH2. Volume control motion is
smooth and accurate, providing absolute control with near
infinite gain resolution.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Rear Panel Functions
Right and Left Line Inputs
Input from source component, accepts a standard unbalanced
input (RCA). The left channel connection is on the right when
looking from the rear, indicated by white inner ring. For more
information on input specifications, please refer to Chapter 11.
Gain Selection Switch
Select HIGH gain or LOW gain to provide the best possible
volume range for your particular headphones, enabling the
optimum listening level to be achieved.
Serial Number/Voltage Labelꢀ
The serial number is unique to your SXH2. Please record this
number and store it in a safe place. For any service related
enquiry, please be prepared to quote the product serial number to
Perreaux personnel or their service representative.
The voltage displayed in this area is the ONLY voltage that can
be accepted by the unit.ꢀ
Caution!
Never attempt to connect the unit to the incorrect voltage.
On/Off Switch
When operating the switch down, power is applied to the SXH2.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
AC Mains Inputꢀ
An IEC-standard mains input is provided at the rear of the unit.
The AC cord set is removable, allowing it to be upgraded at your
will.
Right and Left Line Outputs
Line level output, accepts a standard unbalanced input (RCA).
The left channel connection is on the right when looking from
the rear, indicated by white inner ring. For more information on
input specifications, please refer to Chapter 11.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Special Design Philosophies
Perreaux has been designing and manufacturing only the highest
quality audio componentry for more than a quarter of a century.
Technology has continued to evolve rapidly over that time and
our knowledge and application of design, materials and
manufacturing techniques has advanced in tandem with this.
Today’s Perreaux range comes closer to fulfilling our shared
vision than at any other time in the past.
The SXH2 has been developed to meet customer demands for
compact higher quality products. Careful attention has been
taken throughout the development phase, not to make
compromises that would degrade the high quality of reproduction
that the unit is capable of delivering.
To follow is a discussion on some of Perreaux design
philosophies that have been incorporated into the entire range.ꢀ
Minimalist Leading British architect, John Pawson, writes:
Design
“The Minimum can be defined as the perfection
that an object achieves when it is no longer
possible to improve it by subtraction. This is the
quality that an object has when every component,
every detail, and every junction has been reduced
or condensed to the essentials. It is the result of
the omission of the inessentials”.
Perreaux has historically embraced the minimalist ethic from an
audio design perspective only. The concept of “less equating to
more” has been at the heart of all Perreaux audio designs for
more than a quarter of a century. Our current product offering
takes the minimalist ethic to new levels by totally embracing the
concept.
Minimalist Electronics
We wish to maximise the quality of your listening pleasure by
keeping the componentry and signal path as uncluttered, short
and clean possible. All components in the signal path, even those
of the highest quality have an effect on the signal, thereby
altering the quality of the reproduction in some way. Our aim is
to recreate in its entirety, the original performance by not adding
or subtracting anything, irrespective of the source.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Minimalist Aesthetics
Our products appeal to those who seek the ultimate in audio
exclusivity, namely the perfect blend of “form and function”.
“Form and function” are both tough masters. We make no
excuses for producing some of the most distinctive high-end
audio products on the planet. We let “form and function” blend
together in perfect harmony. This surely is the essence of true
minimalist utilisation.
Minimalism in a Wider Context
John Pawson writes:
“Clearly simplicity has dimensions to it that go
beyond the purely aesthetic: it can be seen as the
reflection of some innate, inner quality, or the
pursuit of philosophical or literary insight into the
nature of harmony, reason, and truth”.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Special Design Features
Construction The beautifully styled curving front panel is milled from solid
6.0mm (0.2”) thick aluminium extrusion and finished in a satin
chrome electroplate.
The front panel also features the
PERREAUX® logo machined into the solid aluminium. The
chassis and cover are both manufactured from heavy gauge steel.
No cover fixing screws are visible. The “Silhouette” SXH2 is
stylish yet functional and exhibits typical hallmarks of the
Perreaux brand.ꢀ
Circuit
Topology
The Power The SXH2 has an internal power supply. These designs are
Supply invariably more sophisticated than those featuring external plug-
in power packs. Special attention must be paid to shielding,
supply transformer design, capacitance and earthing.
Perreaux has specially developed a fully shielded internal
toroidal power supply. A total of 22000µF of smoothing
capacitance and low pass RC filters are employed to provide a
“rock-solid”, super low ripple, linear DC power supply.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Single
Channel
Block
Diagram
Input Stage Utilising a stable current source, along with accurate current
mirroring circuitry, the input stage of the SXH2, in combination
with the overall circuit topology, provides precise detail
resolution and definitive sonic transparency.
PCB Layout Special attention has been lavished on the PCB layout. The unit
is symmetrical in design with each channel being isolated from
the other. The super clean custom designed power supply is
physically segregated from the rest of the sensitive electronics.
Signal Special attention has been paid to ground planes to maintain
Ground sonic purity. All signal grounding is optimised to provide a
platform for a black background and increased dynamic range.
Gain Two gain settings are available, enabling optimum performance
Selection
and listening levels to be achieved from both high and low
impedance headphones.
High Power The output stage is capable of delivering 1.0WRMS per channel
Output
into a 64Ω load and is stable down to 4Ω, enabling the SXH2 to
effortlessly drive a vast array of headphones with the control and
authority that people have come to expect from Perreaux
products.
Dual Two stereo headphone jacks give the option of connecting two
Outputs sets of headphones, allowing another party to be enveloped by
the detailed and dynamic musicality of the SXH2.
Note:
Please ensure that the resulting impedance of the two
headphone sets is not below 8Ω. Use the following
equation to calculate the total impedance: RT = (R1 * R2) /
(R1 + R2).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Care and Maintenance
Note:
Please switch the unit off and remove the cord set from the
rear of the Headphone Amplifier before attempting to
clean your SXH2 in the manner described below.
Never apply liquid directly to the SXH2.
Never use abrasives.
Never rub in a circular motion.
Cover
The cover features a durable high quality powder coat finish. To
remove finger marks and dirt, lightly rub the surface with a soft
cloth.
If the dirt is not removed, dip your cloth in a mild solution of
soap and water, squeeze excess moisture from it and then gently
reapply to the surface.
Stubborn dirt may be removed by the application of a small
quantity of isopropyl alcohol, applied directly to the cleaning
cloth only, and reworking the effected area.
Front Panel The SXH2 front panel features a high quality electroplate finish.
Over time the surface may retain finger marks and may need to
be cleaned to restore it to original condition.
Regular Cleaning
Gently wipe the front panel with a very clean cotton cloth. Wipe
across the surface and never in a circular motion.
Removing Stubborn Marks
Only attempt this infrequently, as too regular or vigorous
application may damage the surface.
Apply a small quantity of any car polish containing carnauba
wax to a very clean cotton cloth.
Note:
The car polish must state “Safe for Clear Coats” as the polish
will therefore contain the absolute minimum amount of
abrasive compound.
Gently wipe over the front panel in lateral motion, allow to dry
then gently wipe off with a very clean cotton cloth.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Warranty Information
1 Year The Perreaux SXH2 is warranted free from defects in material
Limited and workmanship under normal use for a period of 1-year (365
Warranty days) from the date of purchase.
To extend the warranty of the Perreaux SXH2 to three (3) years
from date of purchase, please return a fully completed warranty
registration form along with a copy of the original receipt of
purchase to:
Perreaux Industries Ltd
PO Box 47413
Ponsonby
Auckland
New Zealand
For the Extended Warranty Registration Form, please refer to
Chapter 9.ꢀ
3 Year The extended warranty for the Perreaux SXH2 is three (3) years
Extended from the date of purchase. If during the warranty period the
Warranty SXH2 exhibits defects in materials and/or workmanship, it will
be repaired or replaced, at our option, without charge for either
parts or labour, at our factory in Auckland, New Zealand. The
warranty does not apply to any unit that has been misused,
abused or altered.
Any unit that is not performing satisfactorily may be returned to
the factory in Auckland, New Zealand for evaluation. Return
authorisation must first be obtained by either calling or writing to
Perreaux prior to shipping the unit. Perreaux Industries Ltd and
it’s authorised distributors and dealers shall not be held liable for
any freight or insurance charges. Freight and insurance charges
to and from the Perreaux factory will be the sole responsibility of
the owner of the unit.
There is no other express warranty on the SXH2. Neither this
warranty nor any other warranty, express or implied, including
any implied warranties of merchantability of fitness, shall extend
beyond the warranty period. No responsibility is assumed for
any incidental or consequential damages.
Obtaining In the event that you are experiencing difficulty with your SXH2,
Service please as a first step consult the troubleshooting guide in Chapter
10. For further assistance, please contact your Perreaux dealer.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Extended Warranty
Registration Form
Please complete this form and either fax, mail or e-mail it, along
with a copy of the original receipt, to Perreaux Industries Ltd.
Fax:
+64 9 815 5981
Mail:
Perreaux Industries Ltd
PO Box 47 413
Ponsonby
Auckland
New Zealand
E-mail: [email protected]
Alternatively, complete the online Warranty Registration Form
ꢁ
3 Year Extended
Warranty Form
Name:
Address:
Suburb:
City:
Country:
Telephone:
E-mail:
Website:
Product:
S I L H O U E T T E S X H 2
Serial No:
Dealer:
Purchase Date:
/
/
d
d
m m
y
y
y
y
18
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Troubleshooting Guide
Please use this guide if you are experiencing any problems with
the SXH2 in your system. It will provide possible solutions for
some given symptoms.
There is no SXH2 not turned on
output from
my system
Make sure the SXH2 power switch is in the DOWN position.
AC cord not plugged in
Check that the AC cord is plugged into the IEC socket on the rear
of the SXH2.
Mains power not turned on
Check if the power is turn on at the mains socket on the wall.
Interconnect cables not connected
Make sure that the input and output interconnect cables are
plugged in and are connected to the respective RCA sockets on
the rear of the SXH2.
Source not turned on
Check that your source component is plugged in to the mains and
the power is turned on.
Source not set to play
Ensure that your source component is playing the recording you
would like to listen to, and that pause is not pressed.
No volume setting
Make sure that the volume on your SXH2 is set to a suitable
level.
SXH2 set to incorrect input
Confirm that the input on your SXH2 is connected to the
appropriate source output.
Headphones not connected
Check that your headphones are firmly inserted into the jacks on
the front of the SXH2.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
I can hear a Input and/or output sockets corroded
hum coming
through my
headphones
Check that the input and output RCA sockets on the rear of the
SXH2 are free from corrosion.
Interconnect cables damaged
Make sure that the integrity of your interconnect cables is sound
and they are firmly connected to your source and the SXH2.
SXH2 is close to external interference
Check the proximity of your SXH2 to any possible source of
EMI and/or RF interference, for example computers, televisions,
amplifiers, speakers, etc. Ideally the SXH2 should be placed as
close as possible to your source.
Earth loop in system
If your preamplifier and/or amplifier have an earth/ground lift
switch, toggle it and check which setting sounds better. The
signal ground of the SXH2 is isolated from earth by default, this
means that there needs to be a connection to earth elsewhere in
your system to alleviate hum.
The volume Gain setting too low
control is at
Toggle the gain configuration switch at the rear of the SXH2 UP
to the HIGH gain position. Make sure you turn down the volume
before changing this setting.
maximum
and output
level too low
The volume Gain setting too high
control is
too sensitive
Toggle the gain configuration switch at the rear of the SXH2
DOWN to the LOW gain position.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Specifications
The correlation between published specifications and sonic
quality can be unreliable. A list of numbers reveals virtually
nothing.
All technical measurements must be subject to
qualitative as well as quantitative interpretation. Measurements
of the SXH2 reveal excellent results by any standards. Tested at
115V and 230V after a 10 minute warm up period.ꢀ
Specifications
in Brief
Rated Power Output (per channel)........................2.0WRMS into 32Ω
........................................................................1.0WRMS into 64Ω
..................................................................215mWRMS into 300Ω
Voltage Swing...................................................................31.5Vp-p
Input Sensitivity..............................................................1.45VRMS
Maximum Gain .................................................................. 15.0dB
Gain Adjustment:
Low Setting........................................................................-10dB
High Setting.......................................................................... 0dB
Input Impedance....................................................................50kΩ
Total Harmonic Distortion (THD+N):
Typically........................................... 0.001%, @ 1kHz into 64Ω
20Hz to 20kHz.............................................................. <0.005%
Frequency Response ..........................5Hz–60kHz, +0dB -0.25dB
Signal to Noise Ratio:
Rated Output (unweighted)................................................... 105dB
Dynamic Headroom (rated with music)................................... >3.0dB
Power Consumption:
Idle.................................................................................. 500mW
Maximum (at 3.5W per channel into 8Ω) .................................... 8.0W
Audio Connections
Inputs.......................................................... 1 pair line level (RCA)
Outputs....................................................... 1 pair line level (RCA)
......................................2 stereo headphone jacks (6.35mm, ¼”)
Other Connections
IEC AC mains input receptacle
Mains Input Voltage
115V or 230V AC at 50Hz/60Hz
(Set within the SXH2 at time of manufacture)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Mains Fuse Rating
1 x 2SB 500mA slow blow
(NOT user serviceable)
Overall Dimensions
Width........................................................................216mm (8.5”)
Depth........................................................................181mm (7.1”)
Height.........................................................................58mm (2.3”)
Weight
Gross ..........................................................................2.0kg (4.4lb)
Net............................................................................. 1.4kg (3.1lb)
Specifications
Explained
Rated Power Output (per channel)................... 1.0WRMS into 64Ω
This is the optimum operating level of the unit, offering the best
performance whilst allowing
a
large enough buffer to
accommodate the unpredictable nature of music. It is the
reference output level to which other specifications, such as
sensitivity and gain, are referred. The Rated Output does not
indicate the full capability of the SXH2.
Voltage Swing ...................................................................... 31.5Vp-p
Loud transients call for a sudden burst of power from the
amplifier to drive the headphones. This force is voltage. Peak-
to-peak voltage is a more useful specification than Watts when it
comes to delivering power to a speaker.
Input Sensitivity ...................................................................1.45VRMS
The Input Sensitivity figure indicates the input voltage required
to achieve “rated” output (1.0WRMS into 64Ω).
Maximum Gain....................................................................... 15.0dB
The amount of amplification the amplifier is asserting on the
input signal. Gain can be calculated by dividing the rated output
by the input sensitivity.
Input Impedance....................................................................... 50kΩ
The resistance “load” that is presented to the source component
that is driving the SXH2.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
THD+N.................................................. 0.001%, @ 1kHZ into 64Ω
Total Harmonic Distortion + Noise is the percentage of output
signal which is made up of frequencies added due to harmonics
of the fundamental frequency and noise. By using low-noise
input circuitry and Class A signal stages, Perreaux engineers
have kept this figure to a minimum.
Frequency Response.....................5Hz to 60kHz, +0dB -0.25dB
Describes the frequency range where the amplitude or strength of
the output signal deviates by no more than 0.25dB.
Signal to Noise Ratio (unweighted)........................................ 105dB
The ratio of desired signal to noise signals in the output.
Headphone reproduction is susceptible to noise because of the
nature of the environment to reveal every detail. This is why
Perreaux engineers have designed the SXH2 to maintain a low
noise floor.
Dynamic Headroom ............................................................. >3.0dB
This indicates the SXH2 can provide more than enough extra
power to cope with the sharpest musical transients. Without
adequate headroom, an amplifier can become unstable under
clipping conditions. Perreaux amplifiers are intrinsically stable
under all dynamic conditions.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Physical Dimensions
24
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Contact Details
For more information please contact your Perreaux dealer, or
contact:
Perreaux Industries Ltd
PO Box 47 413
Ponsonby
Auckland
New Zealand
Ph:
Fax:
+64 9 815 5452
+64 9 815 5981
E-mail: [email protected]
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Notes
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|