Prisma SM6 MkII
Balanced Preamplifier
Owners Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Introducing the Perreaux
SM6 MkII Preamplifier
Congratulations on your Perreaux SM6 MkII purchase. To realise the full
potential of your unit you need to appreciate all aspects of its operation.
Before installing the SM6 MkII into your system, read the entire manual
carefully. Endeavour to understand every detail by familiarising yourself with
the controls and features as you read. You will find it easier to install using the
relevant sections of this manual as a reference.
We have attempted to explain every feature and operation facet clearly and
concisely. Your Perreaux dealer will be happy to assist if you encounter any
unforeseen problems.
Read this manual, install your unit correctly and realise the sonic significance of
your investment in Perreaux.
Perreaux products are designed to provide the utmost in sonic realism and
electronic reliability with a functional yet elegant appearance that reflects the
care and craftsmanship applied during all stages of construction.
Features at a
Glance
ꢀ Rugged build quality
ꢀ Truly balanced circuit design
ꢀ Discrete Class-A amplification throughout
ꢀ Multiple regulated power supplies
ꢀ Infrared (IR) full function remote control
ꢀ Precision volume control
ꢀ Dual preamplifier outputs
ꢀ Home theatre bypass
ꢀ Remote trigger outputs
ꢀ Advanced PCB design and earthing techniques
To maintain the consistently high quality that you expect from us, and we expect
from ourselves, Perreaux products are essentially handcrafted.
We maintain the human-link throughout, from design and construction, through
to the ultimate test, your music, your system, your ears.
Because we too listen to our products, we know that with your Perreaux you will
discover many more of the musical secrets we strive to reveal.
From all of us at Perreaux Industries Limited, thank you for choosing the
Perreaux Prisma Series SM6 MkII preamplifier.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
Important Safety Instructions
Note:
All safety and operation instructions should be read carefully before the
SM6 is operated. Keep the Owners Manual in a safe place for future
reference.
ꢀ The SM6 should not be used near water, for example near a bathtub,
kitchen sink, in a wet basement, near a swimming pool, etc.
ꢀ Mounting to a wall or ceiling should be via a heavy-duty bracket or shelf
designed for audio equipment use.
ꢀ The SM6 should be situated away from heat sources such as radiators,
stoves, or other appliances that produce excessive amounts of heat.
ꢀ DO NOT place the SM6 directly onto carpeted surfaces.
ꢀ Avoid exposing the SM6 to extremely high or low temperatures.
ꢀ The SM6 should be connected to a mains power supply only of the type
described in the operating instructions, or as marked on the rear of the
unit.
ꢀ DO NOT disconnect the mains earth from the system.
ꢀ The mains power supply cord should be routed so that it is not likely to
be walked on or pinched by items placed on or against it.
ꢀ The power cord of the SM6 should be unplugged from the mains outlet
when the unit is to be left unused for long periods or when attempting to
connect or disconnect cables and before cleaning your unit.
ꢀ Care should be taken so that objects and/or liquids do not accidentally
fall inside the SM6.
ꢀ Please keep electrical equipment out of reach of children.
ꢀ Please unplug sensitive electronic equipment during electrical storms.
ꢀ Please replace any fuse with the value and type specified.
ꢀ Avoid operating the SM6 with the cover removed.
ꢀ DO NOT bypass any fuse.
ꢀ DO NOT attempt to repair the SM6. In the event of aproblem, please
contact your Perreaux dealer.
ꢀ DO NOT operate this product in an explosive atmosphere.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Table of Contents
i
ii
iii
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Introducing the Perreaux SM6 Preamplifier...............................................................3
Important Safety Instructions ........................................................................................4
Table of Contents..............................................................................................................5
Unpacking and Placement..............................................................................................6
Instant Install......................................................................................................................7
Front Panel Functions......................................................................................................9
Rear Panel Functions..................................................................................................... 11
Remote Control Functions........................................................................................... 15
Special Design Philosophies........................................................................................ 18
Special Design Features................................................................................................ 20
Maximising System Potential ...................................................................................... 21
Care and Maintainance................................................................................................ 23
Warranty Information and Obtaining Service........................................................ 24
Extended Warranty Registration Form.................................................................... 25
Faultfinding Your System............................................................................................. 26
Specifications................................................................................................................... 31
Physical Dimensions...................................................................................................... 35
Contact Details................................................................................................................ 36
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Unpacking and Placement
The SM6 is packaged for maximum protection. Please carefully read the
instructions below before proceeding to unpack the unit. Be extremely careful.
Unpacking
Procedure
ꢀ
ꢀ
ꢀ
ꢀ
Inspect both ends of the cardboard box and open at the end without the
central staple by slitting the reinforced tape at either side.
Fold back the flaps and tip thepackage on end and the inner box will
slide out.
Lay the inner box down flat and upright, open it conventionally by
separating the top tray from the bottom.
The product can now be removed from the bottom packaging. This will
be easier if you have someone to help you by holding the base of the
box.
ꢀ
Alternately, the bottom tray and preamplifier could be tipped upside
down and the bottom packaging removed. If opened in this manner,
please ensure that you turn the contents over again.
Note:
Note:
Be very careful to secure the unit if you are planning to flip the package
upside down.
ꢀ
Remove the two grey foam protectors off either side of the unit, leaving
the black material covering.
ꢀ
Pull back the material and remove the protective membrane from the
front panel.
The preamplifier is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
Box 1 x SM6 MkII Preamplifier
1 x Screwdriver
Contents 1 x SM6 MkII Product manual
1 x Perreaux remote control
2 x AAA batteries
2 x Remote trigger leads
1 x Detachable AC power cord
3 x Performance analysis charts
Placing The SM6 should generally be placed close to your amplifier, keeping the
Your SM6 interconnect cabling short. Position all the separate components of your system
close enough to your SM6 to avoid having to stretch or extend any of the
interconnect cables.
As a “rule of thumb”, allow 80-100mm (3-4 inches) around all sides of the
product and mount the SM6 on a flat surface, ensuring that the unit has adequate
access to free flowing air.
Do not place auxiliary equipment directly on top of the SM6.
Do not place the SM6 directly atop apower amplifier.
Please do not cover the product with a cloth or similar.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Instant Install
If you are like us, the first thing you will want to do is to play your favourite
piece of music through your new SM6. The following instructions are written to
enable you to achieve this as quickly as possible. These are not comprehensive
instructions, but are designed to enable you to play music now!
Note:
Please take the time to read the SM6 manual thoroughly as it
incorporates many features, which will enhance its operation.
Placement
The SM6 is a reference preamplifier and best results will be achieved when
placed on a solid surface with adequate ventilation. DO NOT place on a
carpeted floor or cover the preamplifier!
Turn off associated components
This minimises the potential to damage any other components when connecting
your SM6 into the system.
Connect SM6 to power amplifier
Connect the balanced (XLR) or unbalanced (RCA) outputs of your SM6 to the
appropriate inputs at the rear of your power amplifier.
Note:
Note:
Try to keep all interconnect cables as far from loudspeaker cables as
possible and well away from all AC mains leads.
Connect source component to SM6
Connect the relevant output of your source component to either the balanced
(XLR) or unbalanced (RCA) inputs of your SM6.
Be sure to set the Balanced Input switch to the appropriate position, ON
if using the balanced (XLR) inputs and OFF if using the unbalanced (RCA)
inputs.
Switch on source component
Turn on the source component and make sure you have some program material
ready to play.
Switch on SM6
After checking the supply voltage compatibility with the voltage rating on the
SM6 rear panel, insert the power cord-set supplied into the rear of the unit and
into the wall. Switch on the socket at the wall and power up the SM6 using the
switch on the rear panel.
Switch on power amplifier
Turn on your power amplifier.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Test for undesirable noises
Without any program source material, slowly increase the SM6 volume listening
for any undesirable noises. After establishing that there are no problems, return
the SM6 volume level back to zero.
Play your source material
Start your source material playing.
Increase the volume
Slowly increase the volume on the SM6 to achieve a comfortable listening level.
CONGRATULATIONS!
Now that you have achieved your first objective, sit back, relax and please read
the rest of the manual at your own pace, in your favourite armchair, whilst
sipping a glass of wine. You’ll find the whole experience much more
pleasurable whilst listening to music.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Front Panel Functions
Volume Control and Standby
Volume Control
When either button is depressed, they will alter the volume setting. The volume
adjustment range is 00 – 59 (-95dB to +18dB), with 47 indicating 0dB.
Standby
Pressing simultaneously will put the SM6 into standby, disconnecting all power
supplies except the digital power supply for the microcontroller and turning off
the remote trigger outputs. The selected input and balance settings are saved.
Standby is indicated by a single dot on the display and operation can be resumed
by pressing buttons simultaneously again.
Refer to Chapter 5 “Remote Control Functions”, for further details on volume
and standby controls.
Alphanumeric Display
The display will illuminate when the power is turned on at the mains power
switch or when various remote or front panel adjustments are made. At turn-on,
the display will illuminate with 00 and default to the input selected at the last
standby cycle.
Source Select and Mute
Source Select
When either button is depressed, they scroll through the source inputs.
The order of source inputs and display indication is as follows:
Source Input
Input A
Display
IA
Input B
Input C
IB
IC
Input D (HT Loop)
Input E
HT
IE
Input F
IF
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution!
Note:
Input D (HT Loop) fixes the output to 0dB, as it is a home theatre bypass.
Please ensure the level is suitably attenuated by the upstream processor
or receiver before selecting this input.
The source selector has six positions and supplies the chosen source to
the Pre/Balanced outputs and Tape outputs. If source input E or F is
selected, no signal is supplied to its applicable Tape output to avoid the
potentially damaging feed back loop which can occur if inadvertently
attempting to record and playback the same source simultaneously.
Mute
Pressing the buttons simultaneously will mute the volume, indicated by “MU”
on the display. Mute can be cancelled by pressing the buttons simultaneously
again, or increasing the volume setting. The volume setting can be decreased
whilst the volume remains muted.
Note:
The mute function still operates when source input D (home theatre
bypass) is selected.
Refer to Chapter 5 “Remote Control Functions”, for further details on source
select and mute controls.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Rear Panel Functions
Caution!
Observe precautions regarding volume control settings. Please make all
changes at minimum volume setting. Only increase the volume after the
connections have been made.
Balanced Inputs
Accepts a signal from a source component with balanced outputs via high
quality XLR connectors. The use of good quality balanced line cable into the
balanced input cause the input signal to be relatively immune to noise and
external effects caused by the use of long interconnect cables, helps reduce hum
loop noise and aids in the cancellation of distortion products.
The pin assignments of the balanced XLR input connectors are as follows:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal – (inverting)
Shield ground: Chassis ground
Note:
Please refer to the operating manuals of your balanced output line level
source to verify that the pin assignments of the output connectors
correspond to the SM6 balanced inputs. In the event that they are not
compatible, the interconnecting cable will need to be altered to suit.
Balanced Input Switch
This switch selects which input to use for source input A. Set to ON if using the
balanced (XLR) inputs and OFF if using the unbalanced (RCA) inputs.
Note:
Do not connect source equipment to both the balanced and unbalanced
inputs at any one time.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
The position of the Balanced Input switch has no bearing on the
balanced output, it only selects which input to use for input A. Set the
Balanced Input switch to ON only when using the balanced input.
Refer to Chapter 13 “Specifications”, for detail on input sensitivity and
impedance.
Unbalanced Source Inputs
Accepts a standard single-ended input (RCA) from source components with
single-ended analogue outputs. These high quality gold plated sockets are
highly conductive, corrosion resistant, and provide less potential for corrosion
induced distortion.
Caution!
Input D fixes the output to 0dB, as it is a home theatre bypass. Please
ensure the level is suitably attenuated by the upstream processor or
receiver before selecting this input.
Refer to Chapter 13 “Specifications”, for detail on input sensitivity and
impedance.
Tape 1 Line Outputs
This single-ended (RCA) output will provide a line level audio signal, suitable
for recording, from the selected source input. This output is disconnected when
source input E is selected; to prevent any potentially damaging feedback loops.
Tape 2 Line Outputs
This single-ended (RCA) output will provide a line level audio signal, suitable
for recording, from the selected source input. This output is disconnected when
source input F is selected; to prevent any potentially damaging feedback loops.
Preamp Output 1
This single-ended (RCA) output is commonly referred to as “Preamp Out”. It
will provide the audio signal required to drive virtually any amplifier to full
power.
Preamp Output 2
This single-ended (RCA) output is wired in parallel with Main Output 1 and is
useful for supplying signal to another amplifier if bi-amping.
Balanced Outputs
This balanced (XLR) preamplifier output provides the signal required to drive
virtually any power amplifier equipped with a balanced input. Connection
should be made with high quality cables fitted with XLR connectors.
Note:
The position of the Balanced Input switch has no bearing on the
balanced output; it only selects which input to use for source input A.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The pin assignments of the balanced XLR output connectors are as follows:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal – (inverting)
Shield ground: Chassis ground
Caution!
Please refer to the operating manual of your amplifier to verify that the
pin assignments of the input connectors correspond to the SM6 balanced
outputs. In the event that they are not compatible, the interconnecting
cable will need to be altered to suit.
Input Voltage and Fuse Rating
Input Voltage
It is important that the SM6 be operated from the correct AC mains voltage.
This unit is factory set for the voltage applicable to the original country of
destination.
The SM6 will operate satisfactorily within a voltage variation of up to ±5% of
that voltage at which the unit has been set.
If you require the voltage setting to be altered, e.g. relocation to another area,
city or country, or extraordinarily high or low voltages, please contact your
Perreaux dealer. Qualified service personnel can only perform this modification.
Caution!
Caution!
Never attempt to connect the unit to the incorrect voltage. Severe
damage can result from applying incorrect voltage to the unit.
Fuse Rating
The fuse rating displayed here, refers to the rating of the mains inlet fuse.
For more information on fuse ratings, please refer to Chapter 13
“Specifications”.
Never replace the fuse with any other ratings other than the one
specified.
Serial Number
The serial number is unique to your SM6. Please record this number and store it
in a safe place. For any service related enquiry, please be prepared to quote the
product serial number to Perreaux personnel or their service representative.
Remote Trigger Outputs
Two parallel remote trigger outputs are provided to switch on or off any
connected peripherals to the SM6. In the event that it is not possible to cascade
connect peripherals, two outputs are provided. The remote trigger outputs are
designed to accept a mono, 3.5mm diameter, male jack. The voltage rating is
+5V DC when ON and 0V DC when OFF with maximum current being 10mA.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The plug must follow the specifications as per the diagram below:
AC Mains Input
An IEC-standard mains input is provided at the rear of the unit. The AC cord set
is removable, allowing you to upgrade to a cord set of your preference.
Caution! Prior to connection to the AC mains, please check the voltage label on
the rear panel to ensure that your unit conforms to the power supply in
your area. Never attempt to connect the unit to the incorrect voltage.
Severe damage can result from applying incorrect voltage to the unit.
AC Mains Fuse
The SM6 is equipped with a user serviceable AC mains fuse. In the event of
fuse failure, always replace with the same type and value fuse. Remember, fuses
do not usually blow without a reason. Any doubts about fuse failure should be
conveyed directly to your Perreaux dealer.
For more information on fuse ratings, please refer to Chapter 13
“Specifications”.
Caution! This is the ONLY user accessible fuse.
Never replace the fuses with any other ratings other than the one
specified on the rear panel.
Always ensure your SM6 is disconnected from the mains supply before
attempting to change the mains fuse.
Power Switch
Depress this switch to the right (I) to turn power ON. Mute relay circuitry is
employed in the SM6 and output is muted for 1 to 2 second after the power
switch is actuated. Depress this switch to the left (O) to turn the SM6 off at
which time the outputs will be disconnected.
Note: The SM6 resets the volume to minimum at turn-on.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remote Control Functions
The SM6 comes supplied with a 36 button Perreaux Universal infrared remote
control.
The remote control uses 2 x AAA batteries and may be changed by removing the
black perspex insert.
Note:
Press the button on the remote to select the code-set required to
control the SM6.
The SM6 uses the following functions:
Standby
Pressing this button puts the SM6 into standby, disconnecting all power supplies
except the digital power supply for the microcontroller and turning off the
remote trigger outputs. Standby is indicated by a single dot on the display and
operation can be resumed by pressing standby again or selecting a source input.
Mute
Depressing this control causes volume to be muted. The display will indicate
"MU" and the volume will remain muted until the volume level is increased, or
the mute button is depressed again at which stage volume will be returned to the
previous setting.
Note:
The mute control has a ‘punch through’ function and will operate
regardless of the code-set selected i.e. you can be operating the CD
player remote functions and still use the mute control without selecting
the
button first.
Display
Pressing this button will cause the display to turn off, and is intended for use if
the light of the display is distracting (for instance in a darkened room). Any
operations performed will be momentarily displayed before resuming a turned
off state. The display can be turned on by again pressing the display button.
Balance Left /
Balance Right
The balance controls allow you to vary the level of either the Left or Right
channel to obtain the correct stereo balance for your listening position. Pushing
the Balance Left button will cause the level of the right channel to be attenuated
(decreased in volume). Pushing the Balance Right button will cause the level of
the left channel to be attenuated.
During any balance adjustment the display will indicate the direction of
adjustment, left or right, with an "L" or an "R" followed by a number indicating
the level of adjustment. The range is L1-L9 and R1-R9. "LR" on the display
indicates the balance is centred.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Balance settings are stored when the unit is put into standby.
/
Input A Source Select
selects source input A and the relevant code-set to control the
selects source input A only. Source input A is
indicated by “IA” on the display of the SM6.
Depressing
compact disc player. Pressing
/
Input B Source Select
Depressing
tuner. Pressing
selects source input B and the relevant code-set to control the
selects source input B only. Source input B is indicated by
“IB” on the display of the SM6.
Input C Source Select
Depressing this control selects source input C. Source input C is indicated by
“IC” on the display of the SM6.
Input D Source Select (home theatre bypass)
Depressing this control selects source input D. This offers a preamplifier bypass
for home theatre applications. Home theatre bypass mode is indicated by “HT”
on the display of the SM6.
Note:
Volume and balance functions are disabled in home theatre bypass
mode, although the volume can still be muted.
Input E Source Select
Depressing this control selects source input E. Source input E is indicated by
“IE” on the display of the SM6.
Input F Source Select
Depressing this control selects source input F. Source input F is indicated by
“IF” on the display of the SM6.
Volume Up
Depressing this button increases the volume.
Volume Down
Depressing this button decreases the volume.
Note:
The Volume control has a ‘punch through’ function and will operate
regardless of the code-set selected i.e. You can be operating the CD
player remote functions and still use the volume controls without
selecting the
button first.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll Source Up
Pressing this button scrolls the source input up, selecting in the order:
IA ꢀ IB ꢀ IC ꢀ HT ꢀ IE ꢀ IF ꢁ
Scroll Source Down
Pressing this button scrolls the source input down, selecting in the order:
IA ꢀ IF ꢀ IE ꢀ HT ꢀ IC ꢀ IB ꢁ
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Special Design Philosophies
Perreaux has been designing and manufacturing only the highest quality audio
componentry for more than a quarter of a century. Technology has continued to
evolve rapidly over that time and our knowledge and application of design,
materials and manufacturing techniques has advanced in tandem with this.
Today’s Perreaux range comes closer to fulfilling our shared vision than at any
other time in the past.
To follow is a discussion on some of Perreaux design philosophies that have
been incorporated into the entire range.
Minimalist Leading British architect, John Pawson, writes:
Design
“The Minimum can be defined as the perfection that an object
achieves when it is no longer possible to improve it by subtraction.
This is the quality that an object has when every component, every
detail, and every junction has been reduced or condensed to the
essentials. It is the result of the omission of the inessentials”.
Perreaux has historically embraced the minimalist ethic from an audio design
perspective only. The concept of “less equating to more” has been at the heart
of all Perreaux audio designs for more than a quarter of a century.
Minimalist Electronics
We wish to maximise the quality of your listening pleasure by keeping the
componentry and signal path as uncluttered, short and clean possible. All
components in the signal path, even those of the highest quality have an effect
on the signal, thereby altering the quality of the reproduction in some way. Our
aim is to recreate in its entirety, the original performance by not adding or
subtracting anything, irrespective of the source.
Minimalist User Interface
We carefully study the user interface and par down the number of buttons and
associated clutter leaving just the essential and no more. How tempting it has
been over the years to loose sight of our core values as technology or trends
have made it possible. That is one of the reasons why our older products still
have such a high resale value today. The user interface has and always will
remain simple, free from adornments, clean and uncluttered.
Minimalist Aesthetics
Our products appeal to those who seek the ultimate in audio exclusivity, namely
the perfect blend of “form and function”.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
“Form and function” are both tough masters. That is why our amplifier heat
sinks are not hidden, but instead feature prominently in all our designs. We
make no excuses for producing some of the most distinctive high-end audio
products on the planet. We let “form and function” blend together in perfect
harmony. This surely is the essence of true minimalist utilisation.
Minimalism in a Wider Context
John Pawson writes:
“Clearly simplicity has dimensions to it that go beyond the purely
aesthetic: it can be seen as the reflection of some innate, inner
quality, or the pursuit of philosophical or literary insight into the
nature of harmony, reason, and truth”.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Special Design Features
Rugged Build Mechanical strength has been a hallmark of Perreaux products since the
Quality company first started production back in 1974. The concept behind the physical
design and construction is that each structural member should contribute to both
rigidity and performance.
Balanced The SM6 is a truly balanced preamplifier, from input to output. The positive
Design and negative halves of the signal never touch, remaining balanced throughout all
stages. This circuit topology offers the ultimate in performance, providing
increased noise rejection and lower levels of distortion.
Class A Four discrete output stages operating in Class A provide output buffering. This
Output enables low impedance loads to be driven, over long cable lengths using any
cable.
Multiple There is a separate power supply for each section of the preamplifier. One for
Power each of the volume control chips (two chips are used to keep the system fully
Supplies balanced and therefore, to maintain separation, each chip is supplied with it’s
own separate power supply), another one for each of the output buffering stages
(once again because the SM6 utilises a fully balanced circuit topology), another
for the digital logic and the final power supply looks after the input relays. The
advantage of this is that there is complete isolation from stage to stage. The
digital noise is kept completely out. This is further evidence of a thoroughly
designed product offering.
Infrared (IR) Many audiophile grade components are still provided with analogue controls
Remote that are adjusted on the faceplate of the unit. The SM6 features an infrared (IR)
Control remote control meaning you don’t have to get out of your chair to make an
adjustment. Some of the functions available are: standby, mute, volume
up/down, display on/off, input select and balance.
Earthing Perreaux engineers pay particular attention to designing the product to ensure
maximum separation between internal signal and power earths, only meeting at a
central starred point.
Precision The SM6 uses two digitally controlled resistor ladder volume controls. This is
Volume because we treat the positive and negative parts of the signal separately (true
Control balanced topology). The advantages of using a digitally controlled analogue
resistor ladder to adjust volume are precise control, no contacts to corrode
creating wiper noise and no analogue component drift.
Dual Outputs You do not need to purchase an RCA style splitter if you want to drive two
separate power amps simultaneously, as there are dual parallel preamplifier
outputs.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Maximising System Potential
Interconnects An often-ignored area in high fidelity systems is the cabling connecting the
and Speaker various components. Interconnect leads should be high quality cable with
Cables substantial terminations. Gold plate is inherently resistant to corrosion, and an
excellent conductor. The presence of corrosion induces distortion and poor
conductivity will seriously interfere with sound quality. Terminations must plug
snugly into sockets to maintain maximum conductivity and to avoid annoying
earthing problems.
Speaker cabling is equally critical. Use only solidly constructed cable of high
purity copper or silver content.
Again, gold plated terminations are
recommended, of the spade or banana plug type. Use cables of equal length and
as short as possible to maintain uniform electrical resistance at the lowest
possible level. If your amplifier is closer to one of your speakers than the other,
avoid coiling the longer lead as this can create inductance, with the potential of
reduced high frequency performance. Keep all connections clean, firm and tight.
The traditional adage that a chain is only as strong as its weakest link most
certainly applies to audio systems.
Bi-amping Bi-amping uses two similarly powered amplifiers, with exactly the same input
sensitivity so that, when the same input signal is provided to each of them, the
output level will be exactly the same. This can often be done with one power
amplifier connected to the tweeters and another to the woofers, as it spreads the
power requirement between the two amplifiers. Bi-amping can achieve greater
control, dynamics and resolution than if you try to run everything from a single
stereo amplifier.
Balanced The use of the balanced signal inputs and outputs can have the effect of cleaning
Interconnects up hums, buzzes, radio frequency interference (RFI) and general extraneous
rubbish that can enter an audio system. A balanced signal input system operates
on the principle of differential amplification. The positive and negative inputs
are contrasted against one another and the difference between them is amplified.
Noise entering the system is imposed equally on the positive and negative
signals and therefore will not be amplified, as no differential voltage exists.
The term used to describe the quality of the effect is called Common Mode
Rejection Ratio (CMRR). CMRR is an equipment and system specification,
which describes how well unwanted common mode signals are counteracted
when used in conjunction with balanced connections. CMRR action prevents
the egress and build up of extraneous hum; buzzes and RFI when analogue
signals are conveyed down cables and between equipment powered from
different locations and is widely used in professional audio applications.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The rejection ratio achieved is described in minus dB. The CMRR of a system
follows the formula 20Log(Voutput/Vinput). In other words a CMRR of –40dB
means that all garbage entering the unit will be made 100 times smaller. The
piece of equipment with poorest CMRR will effectively determine the hum and
RFI level of the system. Effectively the weakest link in the chain. Highest
quality audio systems should quote a CMRR figure of –80dB or better.
Positioning Positioning of your source equipment (tuner, video, disc, tape, record, decks) is
Ancillary important. To avoid airborne frequency peaks, place them well away from your
Equipment loudspeakers and not in the corners of your listening area.
Loudspeaker Loudspeaker placement is a controversial issue; suffice to say that room corners
Placement are generally the worst situation. Everything which constitutes your listening
area, including the materials used in its construction, will affect the sound itself
and the sound stage created. Equally, you have to live with your system and
therefore compromises will have to be made in line with your particular
priorities. The best advice we can give concerning the choice of loudspeakers is,
establish clearly in your mind your requirements; listen to many makes and
models, and if at all possible audition your preferred choice in your own
listening area and trust your own ears.
Matching When matching speakers to amplifier wattage – ordinarily, the amplifier should
Amplifier and have a continuous RMS output power rating the same as or higher than the
Speaker speakers at the same impedance rating. For example, 100WRMS, 8Ω speakers
Ratings driven by a 100WRMS at 8Ω amplifier is not as ideal as 100WRMS, 8Ω speakers
driven by a 160WRMS at 8Ω amplifier.
Note:
100 Watts is twice as loud as 10 Watts, not ten times as loud.
Perreaux equipment is designed with substantial headroom built in – that is, the
reserve necessary to reproduce musical peaks without clipping.
Final High fidelity systems are an investment deserving of careful thought and
Thoughts personal time. Your preferences, priorities and constraints will dictate the
parameters of your purchase; your ears will tell you what the right choice is for
you. Our experience tells us that the bitterness of dissatisfaction lingers long
after the fragrance of cheap price is forgotten, hence our use of the term –
investment.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Care and Maintenance
The SM6 has been designed to provide many years of trouble free enjoyment. It
is important to keep the exterior of the unit clean.
Note:
Please switch the unit off and remove the cord-set from the rear of the
amplifier before attempting to clean your SM6 in the manner described
below.
Never apply liquid directly to the SM6.
Never use abrasives.
Never rub in a circular motion.
Cover The cover features a durable, high quality powder-coat finish. To remove finger
marks and dirt, lightly rub the surface with a soft cloth.
If the dirt is not removed, dip your cloth in a mild solution of soap and water,
squeeze excess moisture from it and then gently reapply to the surface.
Stubborn dirt may be removed by the application of a small quantity of
methylated spirits, applied directly to the cleaning cloth only and reworking the
effected area.
Front Panel The SM6 front panel features a high quality electroplate finish. Over time the
surface may retain finger marks and may need to be cleaned to restore it to
original condition.
Regular Cleaning
Gently wipe the front panel with a very clean cotton cloth. Wipe across the
surface and never in a circular motion.
Removing Stubborn Marks
Only attempt this infrequently, as too regular or vigorous application may
damage the surface.
Apply a small quantity of any car polish containing carnauba wax to a very clean
cotton cloth.
Note:
The car polish must state “Safe for Clear Coats” as the polish will therefore
contain the absolute minimum amount of abrasive compound.
Gently wipe over the front panel in lateral motion, allow to dry and then gently
wipe off with a very clean cotton cloth.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Warranty Information
and Obtaining Service
1 Year The Perreaux SM6 is warranted to be free from defects in material and
Limited workmanship under normal use to the original purchaser for a period of 1-year
Warranty (365) days from the date of purchase from an authorised dealer or distributor.
5 Year To extend the warranty on your Perreaux SM6 to five (5) years from date of
Extended purchase, please return a fully completed warranty registration form along with a
Warranty copy of the original receipt of purchase to:
Perreaux Industries Ltd
PO Box 305
Mosgiel
Dunedin 9053
New Zealand
For the Extended Warranty Registration Form, please refer to Chapter 11.
Warranty Perreaux Industries Ltd may, at its discretion, allow the warranty on this product
transfer.
Information If during the warranty period the Perreaux SM6 exhibits defects in materials
on the SM6 and/or workmanship, it will be repaired or replaced, at our option, without
Warranty charge for either parts or labour. The warranty does not apply to any unit that
has been misused, abused or altered.
Any unit that is not performing satisfactorily may be returned to the factory in
New Zealand for evaluation. Return authorisation must first be obtained by
either calling or writing to Perreaux prior to shipping the unit. Perreaux
Industries Ltd and its authorised distributors and dealers shall not be held liable
for any freight or insurance charges. Freight and insurance charges to and from
the Perreaux factory will be the sole responsibility of the owner of the unit.
There is no other express warranty on the SM6. Neither this warranty nor any
other warranty, express or implied, including any implied warranties of
merchantability of fitness, shall extend beyond the warranty period. No
responsibility is assumed for any incidental or consequential damages.
Obtaining In the event that you are experiencing difficulty with the SM6, please as a first
Service step, follow the faultfinding procedures in Chapter 12. If after following this
procedure, you require further assistance, please contact your Perreaux dealer.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Extended Warranty
Registration Form
Please complete this form and either fax, mail or scan and e-mail it to Perreaux
Industries Ltd.
Fax:
+64 3 489 2976
Mail: Perreaux Industries Ltd
PO Box 305
Mosgiel
Dunedin 9053
New Zealand
E-mail: info@perreaux.com
Alternatively, complete the online Warranty Registration Form on our website
– www.perreaux.com.
ꢁ
5 Year Extended Warranty Form
Name:
Address:
Suburb:
City:
Country:
Telephone:
E-mail:
Website:
Product Purchased:
Serial Number:
Dealer:
P R I S M A S M 6 M K I I
/
/
Purchase Date:
d
d
m
m
y
y
y
y
25
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Faultfinding Your System
Cause and Hum is a particularly annoying form of noise in any high fidelity system and at
Elimination some time has been experienced by many of us.
of Hum
Hum may result from a number of different situations and to make matters
worse maybe caused by a seemingly illogical combination of circumstances.
One or more of three specific causes creates hum in the system.
Induced Hum
Hum can be induced into the system from one or more sources and is generally
associated with the radiation of noise from one system into another.
Hum and noise can be radiated from any object or system involving AC voltage
and current such as power supplies in amplifiers, motors, switching equipment
etc. All of these may be found in your hi-fi system or within your own home.
Hum may be induced into any part of the system, so there are no specific
instructions that can be given which will offer a guaranteed cure. A good
practice to adopt is to keep low-level signal equipment such as phono systems,
tuners etc. well away from high-level signal equipment such as power
amplifiers. Alternatively, careful designs must be employed to negate these
effects on low-level signal equipment. Another good practice to adopt is to keep
all signal leads away from power leads.
The practice of neatly tying excess leads together for a tidy looking installation
should be resisted, as this could be the cause of induced hum in the system.
Earth Loops
Earth loops are a particularly annoying cause of hum in the system. Earth loops
are created by mains frequency current flowing in the screen of signal leads and
becomes apparent with the lack of adequate earthing between the various pieces
of equipment making up the hi-fi system. This is further compounded by the
fact that the equipment earthing considerations vary between different
manufacturers and countries.
Perreaux products used with equipment manufactured by other manufacturers
may cause an earth loop situation, but Perreaux products used with other
Perreaux products will not cause an earth loop situation provided the following
precautions are observed:
ꢀ
The entire hi-fi system must be connected to the same mains/line power
outlet. This will ensure that each piece of the system shares the same earth
or ground. This rule applies to all installations of all brands of equipment.
A preamplifier or power amplifier may be operated from an extension cord
plugged into the same mains/line outlet.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
ꢀ
ꢀ
When a piece of equipment is supplied with a threepin mains/line supply
lead all three pins must be connected in the correct fashion - see your
dealer if in doubt.
Check all interconnecting signal leads for good connections, both internal
connections and firm contact with the sockets. While the centre pin may
make firm contact, it is very important that the outer contact is also firm.
Never remove the earth/ground wire from the mains/line supply of any
piece of equipment. This could be hazardous.
Broken Earth Connections
This is a common cause of hum and noise in the system. In many instances, the
only way to eliminate the possibility of hum problems arising through a broken
earth connection somewhere in the system is to physically check every
connection.
Identifying When experiencing a problem, such as one channel not working, or a noise in
and Isolating one channel, it is good practice to adopt a method of isolating the problem to a
Problems specific item or area. This practice will assist in diagnosing, curing, or at least
advising your technician of the problem and result in a saving of time, money
and perhaps frustration.
A logical approach to isolating the probable cause of the problem is to start at
the loudspeakers and work back to the music source, eliminating each piece of
equipment in turn.
Caution!
Observe precautions regarding volume control settings. Please make all
changes at minimum volume setting. Only increase the volume after the
connections have been made.
Check that the entire system is connected in the proper manner and that the
mains/line supply is connected and switched on.
For clarity during this section, we have labelled one loudspeaker ‘A’ and the
other loudspeaker ‘B’. In this example, loudspeaker ‘A’ appears faulty.
Initial system connections
PREAMPLIFIER
AMPLIFIER
A
B
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 – Loudspeakers
PREAMPLIFIER
AMPLIFIER
A
B
Change the loudspeaker leads from one loudspeaker to the other. If the fault
remains in loudspeaker ‘A’, then loudspeaker ‘A’ is at fault, go no further.
If the fault now appears in loudspeaker ‘B’ then the problem lies further up the
line. Move on to step 2.
Step 2 – Loudspeaker Leads
PREAMPLIFIER
AMPLIFIER
A
B
Change the loudspeaker leads completely from left channel to right and from
right channel to left by now swapping them at the amplifier output. If the fault
now appears in loudspeaker ‘B’, then that loudspeaker lead is at fault, go no
further.
If the fault appears in loudspeaker ‘A’ then loudspeaker leads are OK. Move on
to step 3.
Caution!
Restore the loudspeaker leads to their original connections at both ends.
Step 3a – Inputs (Channels)
PREAMPLIFIER
AMPLIFIER
A
B
Change the input plugs on the rear of your amplifier, as follows: Change each
input source in turn by swapping the plugs left to right and right to left. If the
fault changes to loudspeaker ‘B’ on any one of the selected inputs, then that
particular input source is possibly at fault. Move on to step 3b.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
If the fault stays in loudspeaker ‘A’, then it is probable that the fault may exist
within the amplifier.
Caution:
Changing of any connectors must be carried out at a minimum volume
setting. Only increase the volume after the connections have been
changed.
Step 3b – Inputs (Interconnects)
PREAMPLIFIER
AMPLIFIER
A
B
Change the interconnect leads completely from left channel to right and from
right channel to left by now swapping them at the source component’s output. If
the fault stays in loudspeaker ‘B’, then the interconnect lead is at fault, go no
further.
If the fault appears in loudspeaker ‘A’, then the interconnect lead is OK.
Caution!
Changing of any connectors must be carried out at a minimum volume
setting. Only increase the volume after the connections have been
changed.
Should the fault prove to be in the amplifier it will be necessary to determine
where the fault actually lies. Most of this has been done, for instance, you now
know what input/s and what channel is affected. This information will assist
your Perreaux dealer or service person when or if any service is required.
If the apparent fault is noise in one or both channels and has been localised to
the amplifier, it will be necessary to determine whether or not the noise increases
with the volume control; whether or not the noise exists when no input at all is
connected to the amplifier; and what type of sound the noise is. For example,
low frequency humming noise or high frequency hissing noise.
This
information will also assist your service person in making repairs or
adjustments.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Faultfinding
Flowchart
Fault in
loudspeaker A
Swap loudspeaker
connections
Fault in
loudspeaker
A?
Loudspeaker A
at fault
YES
NO
Swap amplifier
outputs
Fault in
loudspeaker
B?
YES
Loudspeaker
cable at fault
NO
Restore speaker
cablesto original
connections
Swap amplifier
source input
channels
Fault in
loudspeaker
NO
Loudspeaker
cable at fault
YES
Swap source
output channels
Fault in
loudspeaker
A?
NO
Input source
at fault
YES
Amplifier
at fault
30
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Specifications
The SM6 specifications are detailed in brief and then subsequently in more
detail. In the detailed version, we attempt to explain the significance of each
specification.
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation. Measurements of the SM6 reveal excellent results by any
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications Rated Output
In Brief Unbalanced:.............................................................................................1.5VRMS
Balanced:.................................................................................................1.5VRMS
Maximum Output
Unbalanced:.............................................................................................3.3VRMS
Balanced:.................................................................................................6.8VRMS
Gain Range:...................................................................................-97dB to +18dB
Gain Resolution:............................................................................................ 1.5dB
Total Harmonic Distortion (THD+N)
Rated Output:...............................................................<0.004%, 20Hz – 20kHz
Frequency Response
20Hz – 20kHz:............................................................................ +0dB, –0.03dB
10Hz – 60kHz:............................................................................ +0dB, –0.15dB
Signal to Noise ratio (unweighted)
Unbalanced:................................................................................................. 95dB
Balanced:................................................................................................... 100dB
Dynamic Range:........................................................................................... 116dB
Channel Separation
Unbalanced:...................................................................................95dB @ 1kHz
.................................................................................................70dB @ 20kHz
Balanced:.....................................................................................105dB @ 1kHz
.................................................................................................80dB @ 20kHz
Input Impedance
Unbalanced:.................................................................................................10kΩ
Balanced:.....................................................................................................20kΩ
Input Sensitivity
Unbalanced:.............................................................................................. 200mV
Balanced:.................................................................................................. 200mV
Input Overload
Unbalanced:.............................................................................................3.9VRMS
Balanced:.................................................................................................7.8VRMS
Phase Accuracy:....................................................................±0.5˚, 20Hz – 20kHz
Power Consumption
Standby:...................................................................................................... 0.5W
Operation:..................................................................................................... 50W
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Connections
Audio Inputs
Unbalanced:................................................................... 6 pairs RCA connectors
Balanced:......................................................................... 1 pair XLR connectors
Audio Outputs
Unbalanced:................................................................ 2 pairs RCA preamp level
.........................................................................................2 pairs RCA line level
Balanced:......................................................................1 pair XLR preamp level
Other Connections
1 x IEC AC mains input receptacle
2 x 3.5mm mono jacks
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the SM6 at timeof manufacture)
Dimensions
Width...............................................................................................430mm (16.9”)
Height ................................................................................................106mm (4.2”)
Depth...............................................................................................323mm (12.7”)
Fuse Ratings
Mains input fuse
100 – 125V:.........................................................................2SB slow blow 0.5A
200 – 250V:.........................................................................2SB slow blow 0.5A
(user serviceable)
Internal DC rail fuses ..................................................2 x 2AG normal blow 0.5A
(NOT user serviceable)
Weight
Net:....................................................................................................7.7kg (17.0lb)
Gross:...............................................................................................10.7kg (23.6lb)
Specifications Rated Output........................................................................................... 1.5VRMS
Explained
The SM6 has been designed to drive any amplifier to it’s full potential. Even
with an input level from a source component with a low level output, the SM6
has enough gain to provide the amplifier with an optimum signal, utilising the
full dynamic range and signal to noise specifications of the amplifier.
Maximum Output ................................................................................... 3.3VRMS
The maximum output level of the SM6 has been designed to provide substantial
headroom allowing greater dynamics without clipping, handling any musical
transients with finesse and ease.
Gain Range ................................................................................ -97dB to +18dB
The range in which the SM6 can alter the volume level. At the minimum setting
‘00’ the volume level is -97dB, at the maximum setting ‘59’ the level is +18dB.
Volume setting ‘47’ is 0dB.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Gain Resolution...........................................................................................1.5dB
This is the change in gain between each successive volume setting (i.e. ‘46’ is
-1.5dB, ’47’ is 0dB, ‘48’ is +1.5dB). The gain resolution is linear throughout
the entire gain range.
Total Harmonic Distortion (THD+N).......................... <0.004%, 20Hz to 20kHz
Total Harmonic Distortion + Noise is the percentage of output signal which is
made up of frequencies added due to harmonics of the fundamental frequency
and noise. By using a truly balanced circuit topology throughout the SM6 and
maintaining Class A operation at all stages, Perreaux engineers have kept this
figure to a minimum.
Frequency Response .......................................20Hz to 20kHz, +0dB –0.03dB
This is the “standard” specification with which everyone is familiar. Actually,
“frequency response” is a misnomer: technically, it should be called “amplitude
response versus frequency” for it describes how uniform the amplitude or
strength of signals of various frequencies is maintained. It is generally thought
that a difference of 1dB is the least that can be perceived by ear, the SM6 is
specified almost seven times higher, thus exceeding the audible range of the
human ear.
Signal to Noise Ratio (unweighted).............................................................. 100dB
The ratio of desired signal to noise signals present in the output. The balanced
circuit topology of the SM6 provides the foundation for high noise rejection.
This figure is referenced to the rated output of the SM6, taking into full account
all potentially annoying hum components.
Dynamic Range......................................................................................... 116dB
Dynamic Range is the difference between the loudest and quietest portions of a
signal. Due to CD formats 96dB dynamic range limit, the SM6 provides more
than enough dynamic range to cope with any musical transients the CD format
can throw at it.
Channel Separation....................................................................105dB @ 1kHz
Channel separation indicates the immunity to crosstalk. Crosstalk is caused by
stray inductances and capacitances between components and lines, which results
in unintentional mixing of stereo signals. Meticulous wire routing ensures
excellent high-frequency separation while superior power supply design
maintains low-frequency separation.
Input Impedance..........................................................................................10kΩ
The resistance “load” that is presented to the component that is driving it. The
high value indicates that the preamplifier will not load down the output of most
high quality source components.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Sensitivity........................................................................................200mV
Indicates the amount of input voltage required to drive the unit to its rated
output. Due to the gain setup of the SM6, it is able to achieve its rated output
even from the lowest of input levels.
Input Overload ........................................................................................ 3.9VRMS
Input Overload specifies the maximum signal level that each input circuit can
handle without overloading the preamplifier circuitry and sending it into
clipping.
Phase Accuracy ................................................................ ±0.5˚, 20Hz – 20kHz
Shows the maximum amount of phase difference at any point across the
frequency range 20Hz to 20kHz.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Physical Dimensions
35
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Contact Details
For more information please contact your Perreaux dealer, or contact:
Perreaux Industries Ltd
PO Box 305
Mosgiel
Dunedin 9053
New Zealand
Ph: +64 3 489 2975
Fax: +64 3 489 2976
E-mail: info@perreaux.com
Internet: www.perreaux.com
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Notes
37
Download from Www.Somanuals.com. All Manuals Search And Download.
|