C937M
INSTALLATION MANUAL
MODEL RMJ9UCA RACK MOUNT KIT
®
1.0 SCOPE
3.0 SPECIFICATIONS
Theinformationwithinthismanualcoverstheinstal-
lation of the RMJ9UCA Rack Mount Kit.
Dimensions:
Construction:
Weight:
See Figure 1
16-gauge steel
5 lbs 4 oz.
Installation should be in accordance with all appli-
cable local and national electric codes, utilizing
approved materials only.
4.0 INSTALLATION
1. Remove rubber feet on front bottom of monitor.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.
2. Install monitor through rear of rack, placing rear
rubberfeetonmonitorintolocatingholesinfloor
or rack.
3. Install rack and monitor as an assembly into
console and make any required electrical con-
nections.
2.0 DESCRIPTION
The RMJ9UCA Rack Mount Kit is designed to pro-
viderackmountingforsingleordualPELCOPMC09A
and PMC09A-X 9" monitors.
4. Hold into place, aligning mounting holes of the
RMJ9UCA with mounting holes in console, and
insert and tighten required fasteners (not sup-
plied). If only a single monitor is used, install
cover plate up against window frame and then
insert fasteners and tighten.
This versatile rack will fit any standard 19-inch wide
console or rack configuration.
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES
Figure 1. RMJ9UCA Dimension Drawing
PELCO Manual C937M - 1/96
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|