Pelco Power Supply eps5000 300 User Manual

I N S T A L L A T I O N  
EPS5000-300  
External Redundant  
Power Supply  
®
For Endura Modules  
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
List of Illustrations  
C1631M-A (9/05)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regulatory Notices  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  
RADIO AND TELEVISION INTERFERENCE  
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may  
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in  
which case the user will be required to correct the interference at his own expense.  
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this  
equipment under Federal Communications Commission’s rules.  
This Class A digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.  
C1631M-A (9/05)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before You Begin  
Please familiarize yourself with the parts list before installing the unit.  
PARTS LIST  
Qty Description  
1
2
2
2
2
4
1
EPS5000-300  
USA standard power cord  
European standard power cord  
UK standard power cord  
Over-molded G-power cables  
Screws with washers, 10-32 x 0.750-inch, Phillips, pan head  
Rail Kit  
2
2
2
4
4
8
8
Rails  
Brackets  
Plates  
Screws, 6-32 x 0.375-inch, Phillips, pan head  
Screws, 10-32 x 0.750-inch, Phillips, pan head with washers  
Screws, 8-32 x 0.625-inch, Phillips, pan head with washers  
Cage nuts, 10-32  
1
EPS5000-300 Installation manual  
PACKAGE CONTENTS  
The following diagrams show the contents of the box. When installing the EPS5000-300, refer to these diagrams.  
6
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
USA STANDARD  
POWER CORD  
(110 VAC)  
SHIPPING BOX  
2 EA.  
EPS5000-300  
EUROPEAN  
STANDARD POWER  
CORD (230 VAC)  
2 EA.  
SUPPORT RAIL KIT  
UK  
RACK MOUNT SCREW  
STANDARD POWER  
CORD (250 VAC)  
2 EA.  
INSTALLATION MANUAL  
OVER-MOLDED  
G-POWER CABLES  
2 EA.  
WITH WASHER  
10-32 X 0.750  
4 EA.  
Figure 1. Package Components  
RAIL  
2 EA.  
BRACKET  
2 EA.  
PLATE  
2 EA.  
SUPPORT RAIL KIT  
SHOWN ACTUAL SIZE  
CAGE NUT,  
10-32  
8 EA.  
PHILLIPS PAN  
HEAD SCREW  
6-32 x 0.375  
4 EA.  
PHILLIPS PAN HEAD SCREW  
PHILLIPS PAN HEAD SCREW  
WITH WASHER  
8-32 x 0.625  
8 EA.  
WITH WASHER  
10-32 x 0.750  
4 EA.  
Figure 2. Support Rail Kit  
C1631M-A (9/05)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Description  
The EPS5000-300 external redundant power supply, which is 1 rack unit (RU) high, has dual 300 W power supplies that slide into a tray. The  
external power supply can be mounted into a 19-inch, EIA-standard rack. The EPS5000-300 can be used in the following ways:  
Provide redundant power to two fully populated RK5000PS-5U  
Provide redundant power to one fully populated RK5000PS-5U  
The EPS5000-300 has a relay output connector that is directly wired to the power and is a normally closed (N.C.) dry contact. If the power supply  
fails, the relay opens. The 10-pin power connector allows you to connect an over-molded cable (supplied) from the EPS5000-300 to the  
RK5000PS-5U.  
FRONT VIEW  
Rack Ear (2)  
Power Supply with Handle (2)  
Thumbscrew for Fastening Power Supply (4)  
Pelco Badge Power Indicator (2)  
Figure 3. EPS5000-300 Front View  
BACK VIEW  
AC Power Cord Connector (2)  
Power Switch (2)  
10-Pin Power Connector (2)  
Relay Output Connector (2)  
Spare Fuse (2)  
ᕡ ᕢ  
Figure 4. EPS5000-300 Back View  
8
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Installation  
MOUNTING AN EPS5000-300  
The power supply, which is 1 RU high, can provide redundant power to one or two fully populated RK5000PS-5U. To mount the power supply,  
1. Insert the EPS5000-300 into the rack.  
2. Secure the EPS5000-300 to the rack with four of the supplied 10-32 x 0.750-inch screws and washers.  
3. Connect each power supply to the RK5000PS-5U using the supplied over-molded cables. Figure 8 shows the EPS5000-300 providing  
redundant power to two RK5000PS-5U.  
4. Plug in the AC power cords.  
5. Turn on the power supply switches.  
Figure 5. Mounting an EPS5000-300 into a Rack  
CAGE NUT  
Figure 6. Inserting Cage Nuts  
C1631M-A (9/05)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
ATTACHING RAILS TO AN EPS5000-300  
The rails give the EPS5000-300 more support for rack mounting, especially in deeper racks. To attach the rails, follow these steps and refer to  
1. Secure the two brackets to the back of the EPS5000-300 with the four supplied 6-32 x 0.375-inch screws.  
2. Place the rails on the sides of the EPS5000-300 to a desired length.  
3. Secure the rails and plates to the brackets using the eight supplied 8-32 x 0.625-inch screws and washers.  
4. Secure the rails to the rack with four of the supplied 10-32 x 0.750-inch screws and washers.  
NOTE: The illustration below shows the attachment of one rail only. The steps for attaching the second rail are the same.  
10-32 x 0.750  
8-32 x 0.625  
BRACKET  
6-32 x 0.375  
PLATE  
RAIL  
Figure 7. Attaching Rails  
10  
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EPS5000-300  
POWER CORD  
POWER CORD  
OVER-MOLDED CABLE  
RK5000PS-5U  
OVER-MOLDED CABLE  
RK5000PS-5U  
Figure 8. Connecting to an RK5000PS-5U  
C1631M-A (9/05)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Service  
REPLACING A POWER SUPPLY  
You can easily replace either of the two power supplies in the EPS5000-300 with a replacemnet (EPSPWR-300). You will know if there is a prob-  
lem with a power supply because the blue Pelco badge on the front panel will turn off. Before replacing a power supply, check the fuse. It can be  
1. Disconnect the over-molded cable and the power cord from the failed power supply.  
2. Unscrew both thumbscrews of the failed power supply.  
3. Remove the power supply.  
4. Insert the new power supply.  
5. Secure the power supply by tightening both thumbscrews.  
6. Connect the over-molded cable from the power supply to the RK5000PS-5U.  
7. Plug in the AC power cord.  
8. Turn on the power switch.  
Figure 9. Power Supply Replacement  
12  
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Specifications  
ELECTRICAL  
Input Voltage  
Output Voltage  
Power Consumption  
Fuse  
100-240 VAC  
12 VDC  
600 watts, 308 BTU/H  
4 amps  
MECHANICAL  
Rack Units  
Construction  
Finish  
1
Aluminum  
Black  
GENERAL  
Operating Temperature  
Operating Humidity  
Dimensions  
32˚ to 122˚F (0˚ to 50˚C)  
80% maximum relative humidity, noncondensing  
1.73” H x 17.40” W x 12.00” D  
(4.39 x 44.20 x 30.48 cm)  
Mounting  
Fits 19-inch, EIA-standard rack  
16.5 lb (7.48 kg)  
Unit Weight  
C1631M-A (9/05)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14  
C1631M-A (9/05)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
Exceptions to this warranty are as noted below:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and CC3651H-2X camera models,  
which have a five-year warranty.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned  
for credit, and RA number if returned for repair).  
Two years on Spectra®, Esprit®, ExSite, and PS20 Scanners, including when used in  
continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelco’s liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product  
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for  
such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused,  
whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union  
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.  
REVISION HISTORY  
Manual #  
C1631M  
C1631M-A  
Date  
4/05  
9/05  
Comments  
Original version.  
Added Parts List and Package Contents sections. Added Figure 6. Revised Figures 4 and 5. Revised Power Consumption in Specifications.  
Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
©Copyright 2005, Pelco. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Worldwide Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East  
|
|
|
|
|
|
|
|
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Stereo Amplifier JSX Joe Satriani Signature All Tube Amplifier User Manual
Pelco Computer Monitor PMCS15A User Manual
Pelco Digital Camera CC3551H 2 User Manual
Philips Portable DVD Player PET2008 User Manual
Philips Portable Speaker SBP1150 User Manual
Philips Security Camera VCM8175 DOT User Manual
Pioneer CD Player CDJ 400 User Manual
Planet Technology Network Card VIP 2100 User Manual
Poulan Trimmer TE400CXL User Manual
Powermate Portable Generator PM0545002 User Manual