CM1750EXT/CM1750EXT-BK
Extension Tube
C219M-A (6/04)
Installation Instructions
®
The CM1750EXT/CM1750EXT-BK extension tube extends the length of the BS1750/CM1750/CM1750-BK/TB1750 universal camera mounts . The
gray (CM1750EXT) or black (CM1750EXT-BK) 4-inch (10.16 cm) x 1-inch (2.54 cm) aluminum extension tube is used on the camera mounts to install
cameras weighing a maximum 7 lbs (3.18 kg).
For more information about the BS1750/CM1750/CM1750-BK/TB1750 camera mounts, refer to the C218M-B manual.
INSTALLATION
NOTE: The CM1750EXT/CM1750EXT-BK extension tube and BS1750/CM1750/CM1750-BK/TB1750 camera mounts are not recommended for use
with enclosures.
1. Refer to Figure 1. Disassemble the existing tube from the top of the mount flange. To do this, use a 3/16-inch hex wrench (not provided) to
unscrew the 1/4-20 hex head socket screw, and set the screw aside.
2. Attach the CM1750EXT/CM1750EXT-BK extension tube onto the mount flange. Turn the extension tube until the flange locking pin drops into
the hole in the extension tube. Insert the 1/4-20 hex head socket screw into the flange. Tighten the screw firmly onto the extension tube using a
3/16-inch hex wrench (not provided).
NOTE: Be sure the end of the CM1750EXT/CM1750EXT-BK extension tube that has a countersunk threaded hole and locking pin hole is attached to
the top of the mount flange.
3. Attach the existing tube onto the CM1750EXT/CM1750EXT-BK extension tube. Insert the CM1750EXT/CM1750EXT-BK extension tube 1/4-20
screw into the existing tube’s threaded hole. Tighten the two tubes together firmly.
EXISTING TUBE
EXTENSION
TUBE
Figure 1. Installing the Extension Tube
Download from Www.Somanuals.com. All Manuals Search And Download.
|