CONNECTIVITY—MINI-RACK PRODUCTS
MINI-RACK & CLUSTER-BOXES
Network Access & Connectivity
CATALOG
226
Mini-Rack System and ClusterBoxes™
F E A T U R E S & B E N E F I T S
ꢀ Multi-function—Supports interface converters, CSUs,
fiber modems and virtually all Patton mini-modems.
Multiple datacom devices fit side-by-side in our mini-rack and ultra-compact ClusterBoxes!
ꢀ Hot-swappable—Replace function cards without turning
off the power.
ꢀ Reliable—Our distributed power system gives each rack
card its own power supply circuit
ꢀ Flexible—Convenient rack mount and ClusterBox ver-
sions are available to meet your needs
Our miniature rack cards have a unique design: front func- variety of function
tion cards and rear interface cards that connect together on cards (short-range
a midplane power bus. This configuration allows interface modems or SRMs,
cables to remain connected while function cards are hot- fiber modems, convert-
swapped (and vice versa). Each mini-rack and ClusterBox ers, etc.) and you can mix-and-match function cards with
has a power supply that services all cards in the chassis. different interface cards.
You can configure the mini-rack and ClusterBoxes with a
S P E C I F I C AT I O N S
Environmental
Op. Temp.: 32–122°F (0–50°C)
Humidity: 5–90%, non-condensing
LED indicators: Power, DC Input
120 VAC Power
Input Voltage: 100–230 VAC
Input Current: 400 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
24 VDC Power
Input Voltage: 18–36 VDC
Input Current: 2A Max at 18 VDC
Surge Protection: Triggered at
39 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicator: Power
220 VAC Power
Input Voltage: 200–240 VAC
Input Current: 200 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicators: Power, DC Input
48 VDC Power
Input Voltage: 40–60 VDC
Input Current: 1A Max at 40 VDC
Surge Protection: Triggered at
75 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicator: Power
16 ports fit a wide variety of Patton products—from
CSU/DSUs to short-range modems to converters.
Choose from a variety of rear interfaces: DB-25, RJ-11,
RJ-45, UD-26, etc.
Device
type
Standalone Compatible
Model Rack Card
1000 Series 1000RC Async SRM dual RC
Rack Card (RC) Description
(Configuration)
Device
type
Standalone Compatible
Model Rack Card
1050 Series 1060RC 115.2 Async. SRM RC
1060 Series 1060RC 115.2 Async. SRM RC
1070 Series 1070RC Sync. SRM RC
Rack Card (RC) Description
(Configuration)
Page
79
Page
86
Powered
1004A Series 1004ARC High speed multipoint dual RC
1005 Series 1000RC Async SRM dual RC
81
79
81
79
79
79
82
79
79
79
85
79
88
88
88
85
88
85
86
Short-Range
Modems
(SRM)
87
1008 Series 1004ARC High speed multipoint dual RC
1009 Series 1000RC Async SRM dual RC
1080A Series 1080ARC 57.6 Async./Sync. SRM RC
1110A Series 1110ARC Fiber SRM RC
88
92
Fiber
Modems
1010B Series 1010RC Trans Isolated SRM dual RC
1010R Series 1010RC Trans Isolated SRM dual RC
1012A Series 1012ARC Async., multipoint SRM dual RC
1015 Series 1000RC Async SRM dual RC
1140A Series 1140ARC Fiber Optic Modem w/V.54 Diagnostics 92
1205 Series 1205RC V.35 Sync. Modem Eliminator RC
1206 Series 1206RC X.21 Sync. Modem Eliminator RC
2020 Series 2020RC CCITT V.35 to RS-232 Converter RC
91
91
50
Plug-in
Short-Range
Modems
(SRM)
Converters
& Modem
Eliminators
1016 Series 1010RC Trans Isolated SRM dual RC
1017 Series 1010RC Trans Isolated SRM dual RC
1018 Series 1018RC SLIP/PPP SRM RC
2016 Series 2066RC CCITT V.35 to X.21 Converter w/Buffer 49
2085 Series 2085RC RS-232 to RS-485 Converter dual RC
2089 Series 2085RC RS-232 to RS-485 Converter dual RC
222N Series 222NRC RS-232 to RS-422 Converter dual RC
222N9 Series 222NRC RS-232 to RS-422 Converter dual RC
54
54
56
56
1019 Series 1010RC Trans Isolated SRM dual RC
1020 Series 1080ARC 57.6 Async./Sync. SRM RC
1025 Series 1080ARC 57.6 Async./Sync. SRM RC
1030 Series 1080ARC 57.6 Async./Sync. SRM RC
1035 Series 1045RC 32, 56 & 64 kbps Async./Sync. SRM RC
1040 Series 1080ARC 57.6 Async./Sync. SRM RC
1045 Series 1045RC 32, 56 & 64 kbps Async./Sync. SRM RC
2703 Series 2703RC 2 Mbps G.703 Modem Access Converter 41
visit us online
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIVITY—19-inch RACK PRODUCTS
UNIVERSAL MOUNTING PANELS
Network Access & Connectivity
CATALOG
228
10 and 2-Slot Universal Mounting Panels
F E A T U R E S & B E N E F I T S
ꢀ Multi-Functionality—Supports NTUs, xDSL Modems, Short
Range Modems, and Ethernet Extenders.
Rack, stack, and organize up to 10 Patton devices with these multi-functional mounting panels.
ꢀ Independent Slots—Up to 10 independently operating
slots to completely do away with any single point
of failures.
The Model 1001MP10’s sturdy 4U design easily installs into
any standard 19-inch rack. A combination of a unique
groove system and an easily installed back panel enables
the 1001MP10 to securely lock the individual Patton
modems and their power supplies. For lower density applica-
tions, the Model 1001MP2 offers a 1.5U-high, 2-slot panel.
ꢀ Rackmount—Both Universal Mounting Panels fit into any
19-in. rack. The 10-slot panel is only 4U (7 in./17.78
cm) high. The 2-slot is 1.5U (2.63 in./6.68 cm) high.
ꢀ Cost-Effective—Rack-mount products you have
already purchased.
Model 1001MP10
The Model 1001MP10 Universal Mounting Panel offers the
ability to rack up to 10 Patton products side by side.
Products that are compatible with the 1001MP10 and
1001MP2 include Ethernet Extenders, xDSL modems, short
I’m John, one of Patton’s Product Group
Managers. If you do not find what you
this catalog please call me at
+1 301.975.1000, x160.
You can also send e-mail to
range modems, NTUs, and much more!
1001MP10 rear view
10 rear slots for
device power supplies
The Model 1001MP series offers a convenient method for
converting your favorite Patton standalone product into a
rack-mounted solution.
Model 1001MP2
Patton Product Compatibility Table
xDSL Modems
1082: iDSL Modem
E1/T1 Network Extenders
E1/T1 NTU
Ethernet Extenders
Serial Short-Range Modems
2113: T-Link E1 Extender
2701 Series: G.703/G.704 FE1/E1 NTU
2707 Series: G.703 Clear Channel E1 NTU
2720 Series: T1/FT1 NTU
2155: 144 kbps CopperLink Extender 1060: RS-232 115.2 kbps Asynchronous SRM
2156: 2.3 Mbps CopperLink Extender 1070: RS-232 19.2 kbps Synchronous SRM
2157: 4.6 Mbps CopperLink Extender 1080A: RS-232 57.6 kbps Async/Sync SRM
2168: 16 Mbps CopperLink Extender 1226: Parallel 115.2 kbps SRM
2172: 50 Mbps CopperLink Extender 1075: X.21 64 kbps Sync SRM
1226: RS-232 38.4 kbps Async SRM
3088: G.SHDSL Modem
2115: T-Link T1 Extender
3201: 2.3 Mbps G.SHDSL Router
3241: 4.6 Mbps G.SHDSL Router
1068: VDSL Modem
S P E C I F I C AT I O N S
1001MP10
1001MP2
Front Panel: 10 independently oper- Front Panel: 2 independently operat-
O R D E R I N G I N F O R M A T I O N
1001MP2: 19-in. Horizontal 2-Slot Rack
1001MP10: 19-in. Vertical 10-Slot Rack
ating slots
ing slots
Dimensions: 19 L x 6.75 W x 7 H
in. (48.3 L x 17.15 W x17.78 H cm)
Weight: 4.15 lbs (1.90 kg)
Dimensions: 19.0 W x 2.63 H x 1.9
D in. (48.3 W x 6.68 H x 4.8 D cm)
Weight: 2 lbs (0.95 kg)
visit us online
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIVITY—19-inch RACK PRODUCTS
UNIVERSAL MOUNTING PANELS
Network Access & Connectivity
CATALOG
229
16-Slot Universal Mounting Panel
Model 1001MP16
F E A T U R E S & B E N E F I T S
ꢀ Mount any MicroPak—Supports media converters, terminal
servers, Ethernet bridges, fiber modems, CSU/DSUs, inter-
face converters, short haul modems, and surge protectors
Rack, stack, and organize with Patton’s Multi-Functional Universal Mounting Panel. Rack up
to 16 Patton MicroPak Devices into a dense 2U solution.
ꢀ Low Profile-2U High—Universal Mounting Panel is only
2U (3.5 in. or 8.9 cm) high and holds up to 16
MicroPaks; Installs quickly into any standard 19 inch rack
ꢀ Dry-erase label blocks and port identification numbers for
easy circuit identification
460
3/11 Data Tap
ꢀ Cost Effective—Adapt Patton MicroPak products you
already own for use in a standard 19 inch rack, thereby
eliminating the expense of upgrading to rack-
mounted equipment
2120
1206
2135
Rack-Mount any of Patton’s MicroPak Products
The Model 1001MP16 Universal Mounting Panel offers the
ability to rack-mount any of Patton's MicroPak products side-
by-side. Products that are compatible with the 1001MP16
include Device servers, Media converters, Ethernet bridges,
Fiber modems, Interface converters, and many more!
Patton Product Compatibility Table
VoIP Micro-ATAs & AFAs Device Servers
1000R Series 1012AR Series 503PC
570 Series
580 Series
552 Series
M-ATA
M-AFA
2120 Series 2120/A9
1007 Series 1017 Series
1010R Series 1052 Series
534 Series
547 Series
The sturdy 2U design of the 1001MP16 enables quick and
hassle-free installation into any standard 19-inch rack. The
1001MP16's unique bracket-and-groove mounting system
enables Patton MicroPak cases to be mounted securely into
the panel. Dry-erase labels and individually numbered ports
are provided for easy circuit/port identification.
Serial/Parallel
Converters
Ethernet Bridges
Data Taps
2121 Series 2135C Series
2124 Series 2135 Series
2130 Series
Interface Converters
2026P
2036P
1104 Series 2086 Series
2016 Series 2070 Series
2021 Series 2702 Series
2040 Series 2090 Series
2041 Series 2094 Series
2042 Series
The Model 1001MP16 provides an economical method for
converting your favorite Patton standalone MicroPak prod-
ucts into a customized rack-mounted solution.
Modem Eliminators
460 Series
462 Series
463 Series
465 Series
470 Series
471 Series
472 Series
CSU/DSUs
1205 Series 1206
2710 Series 2715 Series
2711 Series 2400 Series
and many
more...
Back View
S P E C I F I C AT I O N S
Front panel: 16 Operationally inde-
Latching: 16 individual steel clips
O R D E R I N G I N F O R M A T I O N
1001MP16: 19-inch, 16-Slot Mounting Panel
1001MP-PS8: 8-Barrel 5V, 4A Power Supply
pendent slots
with hardware (Included with unit)
Dimensions: 19L x 1.5W x 3.8H in. Power: None required. Some units may
(48.3L x 3.8W x 8.9H cm)
Weight: 1.1 lbs (0.5 kg)
Unique bracket-and-groove system fastens the MicroPak
securely into the panel
require individual power supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
|