IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1.
Water and Moisture
The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming
pool or in a set basement.
2.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it
should not be situated on a bed, sofa, ruq or similar surface that may block the ventilation openings. Also, it should not be
placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation
openings.
Universal Docking Station with 2.4GHz
Wireless Speakers for iPhone/iPod
3.
Heat
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4.
Power Source
MODEL NO： PIWPD3
The unit should be connected to a power supply only of the type described in the operating instructions or as marked on
the appliance.
5.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC
outlet.
6.
Cleaning
The unit should be cleaned only as recommended. See the section "Care and Maintenance" of this manual for cleaning
instructions.
7.
Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the
product,
8.
Do not use attachments not recommended by the product manufacturer,
9. Lightning and Power Surge Protection
Attachments
Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of
electric shock.
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when;
A.
B.
C.
D.
E.
The power supply cord or plug has been damaged.
Objects have fallen into or liquid has been spilled into the enclosure.
The unit has been exposed to rain.
The unit has been dropped or the enclosure damaged,
The unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be
unplugged from the unit to prevent damage or corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods described in the user's operating instructions.
Service methods not covered in the operating instructions should be referred to qualified service personnel.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCES
Power of Main Base
GENERAL OPERATION
The main base is operated by an external AC-DC Power Adaptor with an output of 9V DC / 2000mA
(included).
1. Select a proper docking adaptor (enclosed when
purchase an iPod) and place it into the base, no adaptor
required if you use iPhone, then dock your iPod/iPhone
gently.
1. Insert the adaptor's DC output plug into the DC-IN jack on the back of the Main base
2. Plug the adaptor into a convenient AC wall outlet
Power of Individual Speaker
2. Plug the AC adaptor plug into DC-IN Jack at the rear
side of base, the main base will be turned on
automatically, meanwhile, the power on indicator
turns on with blue color.
Each speaker has 1 built-in rechargeable lithium battery for independent playback.
Before the first use, we recommend to charge each speaker for 4 hours. When speaker is placed on the
powered base (the main base was connected with the AC adaptor ), charging will start automatically. The
speaker charging indicator light will turn on with red color, and it will turn green once the battery is fully
charged, no further charge is applied.
3. Turn the speakers on to play your iPod/iPhone.
Power of Remote Control
4. Rotary the volume knob to choose a proper volume
To use the remote control, please ensure the remote control battery CR2025 (included) is installed properly
and take the insulation clarity paper out.(Once you stop to use the remote control, please Insert in it same as
before). Replace the remote control battery when it stops working. It is highly recommended to use a good
quality button cell.
level, then you should now be able to take the speakers freely from room to room without
disruption (Subject to its surroundings, approximately 100 feet in the open area without any
interference).
Note: Room lighting and battery life can affect the operating range of remote control.
5. Press and hold the Play/Pause on the main base or press the Power on button on
remote control turn off the unit.
SPECIAL TIPS
Meanings of the Speaker Charging Indicator light
ACCESSORIES
1) When the battery inside the speaker is charging, and the volume knob is turned off, the indicator
light will be red color. Once it is fully charged, the light turns to green.
2) When the battery inside the speaker is charging, and the volume knob is turned on, the indicator
light will be purple color. Once it is fully charged, the light turns to blue
3) When the docking station is working and the speakers are separate from the main base, the
indicator light is blue. When the battery level is low, the sound of speaker will be weak, once the
battery is truly exhausted, the speaker will stop working, meanwhile, the the indicator light turns
off.
1 x AC adaptor
1 x Remote Control (include button cell CR2025)
1 x User manual
1 x Line-in cable
How to combine the speakers to main base?
1.Insert the speakers into the main base, make sure the direction marks (R & L) on the bottom of
the speakers match to the main base.
2. Slide the Combination dead bolt to lock position.
How to separate the speakers and main base?
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Slide the Combination dead bolts to unlock position.
2. Press the Open buttons to detach the speakers from the main base.
TROUBLESHOOTING GUIDE
Should you experience difficulties in the use of this player, please refer to the following chart.
Using the Aux-in Jack
1. Press and hold the Play/Pause on the main base or press the Power on button on
Symptom
Possible problem
AC adaptor is not plugged into
a wall outlet or the connector is
not plugged into the DC jack on
the back of the unit.
Solution
remote control to turn on the main base, the power on indicator will turns on with red color if
there is no an iPod or iPhone docked on the main base.
Note: the power on indicator turns to red color means the docking station is in AUX-IN mode.
2.Connect an audio cable to the headphone or line-out jack of an audio device and
plug the other end into the Aux -in jack located on back of the main base
3.Turn audio device on and play this device.
4. Rotary the volume knob to choose a proper volume level, When
finished, press and hold the Play/Pause on the main base or press the Power on
button on remote control to turn off the main base. Remember to turn off the speakers
and your audio device, too.
Plug the AC adaptor into a wall outlet and
plug the connector into the DC jack on the
unit.
The base does not
switch on (no power)
Plug another device into the same outlet to
confirm the outlet is working.
Make sure the dock cradle is the proper fit
for your iPod.
Remove your iPod/iPhone from the dock
and check for any obstruction on the
connectors in the docking and on your iPod.
Then reseat it in the dock.
Wall outlet is not functioning.
Using no/wrong iPod cradle.
iPod/iPhone is not installed
properly.
iPod/iPhone does not
respond to the speaker
system
Please make sure that your iPod/iPhone is
VIDEO OUT FROM THE iPod/iPhone
1. You can connect this unit to a television or other video display that has a composite video input.
2. Securely dock your iPhone or iPod with video.
Your iPod/iPhone is locked up. working properly before docking into the
unit.
Remove your iPod/iPhone from the dock
3. Connect one end of an RCA cable (not included) to rear RCA video jack on the unit.
4. Connect the other end of the RCA cable to VIDEO IN of television or video display.
5. Press the FUNCTION button to select iPod/iPhone mode.
6. Select a movie from your iPod/iPhone menu.
7. iPod: On the main menu choose video then select video setting.
8. iPod: Make sure the TV Out section is set to "ON".
iPod/iPhone is not installed
properly.
and check for any obstruction on the
connectors in the docking and on your iPod.
Then reseat it in the dock.
Please make sure your iPod/iPhone is
working properly before docking into the
unit.
iPod/iPhone does not
charge up
iPod/iPhone battery has
problem.
9. iPod: Switch back to the movie library and play the movie of your choice
Note: Video out will automatic when using an iPod touch or iPhone
Speakers do not play
the sound from docked
device
Speakers receive signal from
other devices, or the other set
of MW-1025A
Place the unit to a location where receive
lesser external signal.
Sound is cut off or
noisy
The unit experiences
interference
Do not turn on other wireless devices
simultaneously.
If the source is iPod/iPhone, try to check the
sound at personal computer before putting
into the iPod/iPhone. If you are using an
external sound source like digital audio
player, try reducing the output volume on the
device itself.
Sound source is distorted.
Volume level is set too high.
Sound is distorted
Decrease the volume.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power Supply
Power adaptor (included):
Input AC 100-240V ~ 50/60Hz
Output DC 9V 2A
Power of remote control:
Wireless Transmission:
1 xDC 3V CR2025 button cell (included)
2.4GHz
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|