PYLE Audio Home Theater System PLE702B User Manual

user’s manual  
.
7-BAND equalizer amplifier  
7-BAND equalizer  
with subwoofer crossover  
and bass boost  
with subwoofer crossover  
and bass boost  
PLE702B  
PLE755S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
table of contents  
table of contents  
general features  
1
PLE702B 2  
PLE755S 3  
features and controls  
PLE702B 4-5  
PLE755S 6-7  
electrical connections  
PLE702B/PLE755S 8  
mounting and installation  
system wiring  
9
PLE702B 10  
PLE755S 11-12  
PLE755S  
precautions and troubleshooting 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
general features  
PLE702B  
7-Band Equalizer/Amplifier  
with Subwoofer Crossover and Bass Boost  
· 7-Band Graphic Equalizer  
· Built-In 4 Channel Amplifier  
· Pre-Amp Input via RCA Jacks  
· Output Level Control  
2
· LED Power Level Meter  
· 0 - +18dB Bass Boost Control  
· Subwoofer RCA Outputs  
· Remote Power On/Off  
· 12 dB Boost/Cut per Frequency Band  
· Rotary Front-Rear Fader Control  
· Independent Subwoofer Crossover  
· High Impedance RCA Inputs  
· Half-DIN Size Cabinet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
general features  
PLE755s  
7-Band Equalizer  
with Subwoofer Crossover and Bass Boost  
· 7-Band Graphic Equalizer  
· Pre-Amp Input via RCA Jacks  
· Output Level Control  
· LED Power Level Meter  
· 0 - +18dB Bass Boost Control  
· 12 dB Boost/Cut per Frequency Band  
· Rotary Front-Rear Fader Control  
· Independent Subwoofer Crossover  
· Front, Rear and Subwoofer RCA Outputs  
· Remote Power On/Off  
3
· High Impedance RCA Inputs  
· Half-DIN Size Cabinet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
features and controls  
power indicator LED  
front  
rear  
RIGHT Output Level  
LEFT Output Level  
max  
POWER  
LED level display  
PLE702B  
fader  
40  
400 0  
+18dB  
front  
rear  
freq  
level  
PL  
E702B  
Vol 65Hz 150Hz 400Hz 1.4KHz 2.4KHz 6KHz 15KHz  
Subwoofer  
series  
4
fader control  
volume control  
equalizer controls  
subwoofer subwoofer  
frequency control boost control  
OUTPUT  
SUB  
INPUT  
LINE  
L
R
L
R
power connectionspower & speaker connections  
sub channel  
outputs  
stereo inputs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
features and specifications  
PLE702B  
7-Band Equalizer/Amplifier  
with Subwoofer Crossover and Bass Boost  
LED level display these rows of LEDs display the Amplifier Output Levels. Left and right channels are  
displayed independently at peak levels.  
center frequencies  
65 Hz · 150 Hz  
400 Hz · 1.4 KHz  
2.4 KHz · 6 KHz  
15 KHz  
power indicator LED this LED is illuminated when the unit is properly powered, grounded and the remote  
power has been turned on.  
fader control • in a 4 Speaker system, rotating the knob to the FRONT side increases the level  
of the front speakers; rotating to the REAR side increase level of the rear speakers.  
At mid position, both sets of speakers are at maximum level.  
subwoofer crossover  
bass boost  
40 - 400 Hz  
0 - +18 dB  
• in a 2 Speaker system, the fader control should be rotated to the position which  
provides highest levels for both sets of speakers.  
amplifier power  
frequency response  
30 Watts (RMS) x 4  
20 - 20 KHz (+/– 1 dB)  
200 mV  
volume control allows adjustment of sound level for particular program material or source.  
5
equalizer controls this seven-band equalizer gives you control over the output levels at various  
input level  
frequencies.  
(for 10% THD output)  
subwoofer frequency control lets you adjust the subwoofer frequency and crossover point from 40-400 Hz.  
subwoofer boost control lets you adjust the subwoofer boost level from a 0 to +18 dB increase.  
power connections connect to power source as follows:  
total harmonic distortion (THD)  
< 0.5%  
(at 15W output)  
speaker impedance  
signal-to-noise ratio (S/N)  
separation  
4-8 Ohms  
+12V: Connect a red wire of at least 12 gauge to the car battery or other power  
source.  
90 dB  
60 dB  
GROUND: Connect a black wire of at least 12 gauge to car chassis for  
ground connection  
current drain  
6A maximum  
10-16V DC Neg. Ground  
REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo  
or other head unit.  
power supply voltage  
dimensions (W x H x L)  
subwoofer channel outputs RCA cables are used to connect the sub outputs to the subwoofer amplifier inputs.  
line channel inputs RCA cables are used to connect the front input signal from head unit or other source.  
speaker connections the connections are used to power a front and rear speaker systems  
mm  
inches  
160 x 29 x 140  
6.3 x 1.1 x 5.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
features and controls  
power indicator LED  
front  
rear  
RIGHT Output Level  
LEFT Output Level  
max  
POWER  
LED level display  
PLE755S  
fader  
40  
400 0  
+18dB  
front  
rear  
freq  
level  
PL  
E755S  
Vol 65Hz 150Hz 400Hz 1.4KHz 2.4KHz 6KHz 15KHz  
Subwoofer  
series  
6
fader control  
volume control  
equalizer controls  
subwoofer subwoofer  
frequency control boost control  
OUTPUT  
REAR  
INPUT  
LINE  
SUB  
FRONT  
L
R
L
R
L
R
L
R
power connections  
sub channel  
outputs  
rear channel  
outputs  
front channel  
outputs  
stereo inputs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
features and specifications  
PLE755S  
7-Band Equalizer  
with Subwoofer Crossover and Bass Boost  
LED level display these rows of LEDs display the Preamp Output Levels. Left and right channels are  
displayed independently at peak levels.  
center frequencies  
65 Hz · 150 Hz  
400 Hz · 1.4 KHz  
2.4 KHz · 6 KHz  
15 KHz  
power indicator LED this LED is illuminated when the unit is properly powered, grounded and the remote  
power has been turned on.  
fader control • in a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT side increases  
the level of the front speakers; rotating to the REAR side increase level of the rear  
speakers. At mid position, both sets of speakers are at maximum level.  
subwoofer crossover  
bass boost  
40 - 400 Hz  
0 - +18 dB  
• in a 2 Speaker system, the fader control should be rotated to the position which  
provides highest levels for both sets of speakers.  
frequency response  
20 - 20 KHz (+/– 1 dB)  
400 mV  
volume control allows adjustment of sound level for particular program material or source.  
input level  
(for 400mV output)  
7
equalizer control this seven-band equalizer gives you control over the output levels at various  
frequencies.  
total harmonic distortion (THD)  
< 0.03%  
(at 400mV output)  
subwoofer frequency control lets you adjust the subwoofer frequency and crossover point from 40-400 Hz.  
subwoofer boost control lets you adjust the subwoofer boost level from a 0 to +18 dB increase.  
power connections connect to power source as follows:  
output impedance  
signal-to-noise ratio (S/N)  
separation  
10K Ohms  
90 dB  
+12V: Connect a red wire of at least 12 gauge to the car battery or other power  
source.  
50 dB  
current drain  
450 mA  
GROUND: Connect a black wire of at least 12 gauge to car chassis for  
ground connection  
power supply voltage  
12V DC Neg. Ground  
REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo  
or other head unit.  
dimensions (W x H x L)  
mm  
inches  
160 x 29 x 117  
6.3 x 1.1 x 4.6  
subwoofer channel outputs RCA cables are used to connect the sub outputs to the subwoofer amplifier inputs.  
front channel inputs RCA cables are used to connect the front input signal from head unit or other source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
electrical connections  
P L E 7 0 2 B • P L E 7 5 5 S  
rear  
OUTPUT  
SUB  
INPUT  
LINE  
PLE702B  
8
RED WIRE  
ORANGE WIRE  
Fuse 6A  
BLACK WIRE  
to remote turn-on  
+12V  
head unit  
Fuse 0.5A  
12V battery  
rear  
OUTPUT  
REAR  
INPUT  
LINE  
SUB  
FRONT  
PLE755S  
RED WIRE  
Fuse 1A  
ORANGE WIRE  
BLACK WIRE  
to remote turn-on  
+12V  
head unit  
Fuse 0.5A  
12V battery  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mounting and installation  
P L E 7 0 2 B • P L E 7 5 5 S  
mounting  
Please take the time to install your new Pyle Signal Processor securely, according to  
4 x 6 mm machine screw (4)  
this diagram, using the hardware provided.  
This Half-DIN size unit can also be installed in the dash adjacent to the head unit, provided  
that there is a slot available.  
dashboard  
wiring tips  
When making electrical connections to your amplifier, please observe the  
following:  
Connect 12V DC from a constant battery source to a +12V slip-on spade terminal and install  
a one (1) amp fuse in line. (six (6) amp fuse for PLE702b case)  
9
Connect the signal processor’s GROUND to a good chassis ground, near where the unit is  
mounted, or to the case of the head unit.  
Signal Processor enclosure  
Connect the signal processor’s REMOTE TURN-ON lead to the remote turn-on lead out of the  
head unit, and install a 1/2 amp fuse in line. (A relay should be used if turning on more than  
one component, such as EQ’s, crossovers or amplifiers.)  
Connect stereo RCA cables from the head’s left and right front outputs to the left and right inputs  
of the signal processor.  
Mounting Bracket  
Connect stereo RCA cables from the left and right outputs, (and low, mid and high outputs if  
applicable), of the signal processor to the left and right inputs of your amplifier(s) or additional  
signal processor(s).  
4 x 12 mm  
self-tapping screw (2)  
4 mm spring  
washer (2)  
Turn the unit on, and adjust the input gain on the signal processor to match the output of the  
head unit (1/2, or at center position, is about 1 V). Be careful not to overdrive the input of your  
amplifier(s) or signal processor(s).  
4 mm plain  
washer (2)  
Adjust each of the crossover or equalizer controls to achieve the desired sound characteristics.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
system wiring  
P L E 7 0 2 B  
left and right  
line outputs  
from head unit  
Basic system application  
using built-in amp and external subwoofer amp  
left and right  
line inputs  
head unit (stereo, CD player, tape deck, etc.)  
OUTPUT  
SUB  
INPUT  
LINE  
PLE702B  
L
R
L
R
10  
SUB CHANNEL  
power amplifier  
+
+
FRONT  
speakers  
L
R
+
+
REAR  
speakers  
L
R
+
+
SUBWOOFERS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
system wiring  
P L E 7 5 5 S  
left and right  
line outputs  
from head unit  
Basic system application  
using front, rear, and subwoofer amps  
left and right  
line inputs  
head unit (stereo, CD player, tape deck, etc.)  
OUTPUT  
REAR  
INPUT  
LINE  
PLE755s  
SUB  
FRONT  
L
R
L
R
L
R
L
R
11  
SUB CHANNEL  
power amplifier  
REAR CHANNEL  
power amplifier  
FRONT CHANNEL  
power amplifier  
+
+
+
+
+
+
L
SUB CHANNEL  
speakers  
R
L
REAR CHANNEL  
R
L
FRONT CHANNEL  
speakers  
R
Download from Www.Somanuals.com. All Manuals Search And Download.  
speakers  
system wiring  
P L E 7 5 5 S  
left and right  
line outputs  
from head unit  
Basic system application  
using a 4 channel amp and subwoofer amp  
left and right  
line inputs  
head unit (stereo, CD player, tape deck, etc.)  
OUTPUT  
REAR  
INPUT  
LINE  
PLE755s  
SUB  
FRONT  
L
R
L
R
L
R
L
R
12  
SUB CHANNEL  
power amplifier  
FRONT CHANNEL  
power amplifier  
+
+
+
+
+
+
L/R FRONT  
speakers  
L/R REAR  
speakers  
L
SUB CHANNEL  
speakers  
R
Download from Www.Somanuals.com. All Manuals Search And Download.  
precautions troubleshooting  
P L E 7 0 2 B • P L E 7 5 5 S  
If you experience...  
Signal Processor does not turn on. Check that:  
• Never drive with the volume raised so high you  
cannot hear what is occuring in traffic around you.  
• Remote Turn-On wire has 12V.  
• Be aware that repeated exposure to excessive  
volume levels can permanently damage your hearing!  
• 12V wire has 12V.  
• Ground wire is properly connected.  
• Keep all electronics away from moisture, dust,  
extreme heat or extreme vibrations.  
Level of sound is low. Check that:  
• Wiring is not loose or cables misconnected/disconnected.  
• RCA cables are not faulty.  
• Pyle Audio products are capable of sound pressure  
levels in excess of 150 dB. Continuous exposure  
to sound pressure levels over 100 dB may cause  
permanent loss of hearing. Use common sense and  
PRACTICE SAFE SOUND.  
13  
Background noise is too high. Check that:  
• Wiring is not loose or cables misconnected/disconnected.  
• RCA cables are not faulty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 1 2 N 0 Y 4  
B r o o k l y n ,  
S t r e e 6 t 3 r d 1 6 0 0  
C e n t e v r i c e S e r P y l e  
R . A . #  
d a m a g e .  
a c c o i d r e n t a l n e g l e c t , m i s t o u s e , s u b o j r e c t v i c e s d e , r  
i m p r o p e r l y  
t o :  
p r e p a i d s h i p a p n e d  
w i t h ,  
p r e u p s a t i o d .  
r e p a t i h r e t o  
t a m p w e a r e s d u n i t t h i e f v o i d  
r e t i u s r i n t e d w h e n u n i t  
l i m i i s t e d  
c o n b s e i d e w r e i l d l  
d e f e t c h t e i o v f e  
w a r r a T n h t y i s  
r e p l a c e m e n t  
o b l i g O a u t i r o n  
k e d p a c  
c a r b e f e u l l y m i u t s t v i c e s e r  
w a r f r o a r n u t y s t o  
p r a o d u c t r e t u r n i W n g h e n  
o r  
w a r r a t h n i t s y u n d e r  
r e t u r n y . o u t o r  
a p p e a m r u s t R . A . #  
2 3 6 - 6 9 ( 7 4 1 8 a 8 t ) n u m b  
w a r r a n t o y b o t T a i n  
r e l a t i n  
w o r k p a p a e l r l o n a n d  
T h . i s n u m b e r  
p a c k a y g o e u o r f  
A u t h o r i R z a e a t t i u o r n n o b t a o i n  
o u t s t i h d e e o n  
H o t l i n e R e t u r n  
C o n o s u m r c e a r l l f i r s t m u s t y o u v i c e s e r  
d a t e .  
e x p i r a t i o n  
i n s u a r a n n d c e , h a n d l i n g ,  
$ 1 2 f . o 0 r 0 o r d e r m o o n r e y c h a e c k i n c l u a d l e s • o  
n u m b R e . A r . a n d  
w i t h n u m b e r V i s a / y M o C u r p r o o v r i d e  
P y o l e f .  
d i s c r s e o t i l o e t n h e a t  
r e p o l a r c e d r e p b a e i r e d w i l l u n i t y o u r  
w o o r k r m a n s h i m p , a i t n e r i a l d e y f e c t s f a c t o r d u e f a i l  
s h i p p i n r e g t , u f r o n r  
p r o d t h u e c t S h o u l  
,
n u m b e p r h o n e d a y t i m e a d d r e s r s e , t u r n y o u r l e t t e r y o u i n r  
i n c • l u d e  
i n d i c a l t e i n t t e g r b r A i e f •  
r e c e i p s t a l e s y o u o r f c o A p y •  
f o l l o t w h e i n g i n c l u a d l e s o m u s o t Y  
p u r c h r a e s t e a . i l o r i g t i h n e a t o l  
l i m i s i t e d w a r r a n  
e x p e a r i e e n y c o i n u g p r o b t h l e e m  
s T h i  
p u o r c f h a s d e a . t e t h e f r o m y e a r ( s 2 ) t w o f o r  
w o r k a m n d a n s h i p m a i t n e r i a l  
p u r c h a s e d P r o d u c t s s h i p m  
c o n s t r u c t e c d a r e a f u r e l l y p r o d u P c y t l s e A l l  
p u o r c f h a s e p r o o f o t h o e r r  
d e f o e f c t s f r e e b e t o  
b e f o r e t e s t e d  
w a r r a a r n e t e d U S A t h e i n  
i t e m s :  
t h o r o a u n g d h l y  
i e r s  
a m p l i f  
p o l i c y w a r r a n t l i y m i t e d  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentair Universal Remote LX 100EZ User Manual
Philips Baby Accessories SCF602 87 User Manual
Philips Cassette Player AZ783 User Manual
Philips MP3 Player SA6015 97 User Manual
Planet Technology Network Router WAP 4030A User Manual
Polaris Offroad Vehicle 340 Touring User Manual
Polycom Conference Phone VTXTM 1000 User Manual
Polycom Telephone 8410D User Manual
Poulan Chainsaw 2004 06 User Manual
Powermatic Chipper PM2020 User Manual