OPERATING INSTRUCTIONS
INDASH AM/FM DVD/CD/MP3 PLAYER
MODEL PLDVD170
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Introduction ------------------------------------------------------------------------------
1-7
Safety precautions ------------------------------------------------------------------------------------- 1
2
3
4-6
7
Important instructions --------------------------------------------------------------------------------
Precautions ----------------------------------------------------------------------------------------------
Identification of controls ------------------------------------------------------------------------------
When using remote control--------------------------------------------------------------------------
Connections --------------------------------------------------------------------------------------
8-10
Outlet wires connection -------------------------------------------------------------------------------
Connecting to an audio system or speakers and monitor input----------------------------
AMP select------------------------------------------------------------------------------------------------
Note on connecting ------------------------------------------------------------------------------------
8
9
10
10
Playing a disc--------------------------------------------------------------------------------------
11-13
11-12
13
Basic playback ------------------------------------------------------------------------------------
Playing at various speeds----------------------------------------------------------------------
Advanced playback------------------------------------------------------------------------------
14-20
Resuming playback from the same location--------------------------------------------
Playing from the desired location -----------------------------------------------------------
Locating a specific title, chapter or track ------------------------------------------------
Play mode ------------------- ---------------------------------------------------------------------
Playing repeatedly ----------------------------------------------------------------------------
Playing without sound------------------------------------------------------------------------
Selecting sound effect------------------------------------------------------------------------
Selecting a playback audio setting-----------------------------------------------------------
14
14
15
16
17
17
18
19
Selecting the camera angle------------------------------------------------------------------ 20
20
Selecting subtitles -------------------------------------------------------------------------------
Function setup -----------------------------------------------------------------------------------
Using the on-screen display ----------------------------------------------------------------
Customizing the function settings ---------------------------------------------------------
21-23
21
22-23
MP3 instruction---------------------------------------------------------------------------
Radio operation---------------------------------------------------------------------------
Others ------------------------------------------------------------------------------------------------
24
25-26
27-32
Precautions -------------------------------------------------------------------------------------
Notes on discs ---------------------------------------------------------------------------------
27
28
Troubleshooting ------------------------------------------------------------------------------- 29
30
Specifications ----------------------------------------------------------------------------------
Accessories and Hardware-------------------------------------------------------------------
31
Note ----------------------------------------------------------------------------------------------- 32
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
+20%
-10%
This digital versatile disc (DVD) video player uses 12V
DC.
For future reference, record the model and serial number
(located on the case of the DVD player) in the space provided.
S/N:
Date:
CAUTION:
THIS DVD VIDEO PLAYER IS A CLASS IIa LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL TO THE EYES,
DO NOT ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING : class IIa laser product - Avoid Long Term viewing of Direct Laser Radiation.
WARNING OF DEW FORMATION
Dew may form on the pickup lens in the following conditions.
- Immediately after a heater has been turned on.
- In a steamy or very humid room.
When the unit is suddenly moved from a cold environment to a warm one.
If dew forms inside this unit, it may not operate properly.
In this case, turn on the power and wait about 2 or 3 hours for the dew to evaporate.
In addition, when the unit is used under low temperatures,
the pick up lens might warm up very fast and dew will form.
In this case, turn on the power and wait a while for the dew to evaporate.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTRUCTIONS
1. Owner's manual
11. Accessories
After unpacking this product, read the owner's
manual carefully, heed all warnings and instruc-
tions given in this manual and those marked on the
unit ,and follow all the operating and other instruc-
tions. Keep this booklet for future reference.
Any mounting of the product should follow the
manufacture's instructions, and should use
a mounting accessories recommended by the
manufacturer. Make sure the player is
securely mounted. Quick stops, excessive
force, or improper installation may cause
damage to the product.
2. Power sources
When the product operates from the battery,
please refer to the operating instructions on
proper connections.
12. Damage Requiring Service
Unplug the unit and refer servicing to
qualified service personnel under the
following conditions:
a) If liquid has been spilled, or objects have
fallen into the product.
3.Ventilation
This product requires proper ventilation as per the
manufacturers's instructions in order to ensure
proper operation.
b) If the product has been exposed to rain
or water.
4. Heat
The product should be placed away from other
products (including amplifiers) that produce heat.
c) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
product to its normal operation.
5. Water and Moisture
Do not allow the product to come in contact with
water at anytime.
d) If the product has been dropped or damaged
in any way.
e) When the product exhibits a distinct change
in performance - this indicates a need for
service.
6. Cleaning
Disconnect power from this product before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning .
13.Servicing
7. Foreign objects
Do not attempt to service this product
yourself. Refer all servicing to qualified
service personnel.
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
14. Replacement parts
When replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result in
hazards.
8. Attachments
Do not use attachments not recommended
by the product manufacturer as they may
cause damage.
9. Please use care when installing the unit,
the unit may fall, causing serious damage
to the product.
10. Do not use a cracked, deformed, or repaired
disc. These discs are easily broken and may
cause serious personal injury and product
malfunction.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Notes on handling
When shipping the DVD player, the original shipping carton and packing materials must be used.
For maximum protection, re-pack the unit as it was originally packed at the factory.
Do not use volatile liquids, such as aerosol spray, near the DVD player. Do not leave any
plastic products in contact with the DVD player for a long period of time. They will leave marks on
the finish.
The top and rear panels of the DVD player may become warm after a long period of use.
This behaviour is normal.
When the DVD player is in use and the engine is off, do not turn on the player for a long time.
Doing so, you may run the battery to where your car will not start.
If you do not use the DVD player for a long period, the unit may not function properly in the
future. Turn on and use the DVD player occasionally.
Notes on locating
When you place this DVD player near a LCD, radio, or VCR(VCD), the playback picture
may become poor and the sound may be distorted. In this case, place the DVD player
away from any LCD, radio, or VCR.
Notes on Moisture Condensation
Moisture condensation damages the DVD player. Please read the following carefully.
Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day.
Drops of water form on the outside of the glass. In the same way, moisture may condense on the
optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following cases.
When you bring the DVD player directly from a cold place to a warm place.
When you use the DVD player in a room where you just turned on the heater, or a place
where the cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and humid place just after you move
the unit from an air conditioned area.
When you use the DVD player in a humid place.
Do not use the DVD player when moisture condensation may occur.
If you use the DVD player in such a situation, it may damage discs and internal parts.
Remove the disc, turn on the DVD player, and leave it for 2 or 3 hours . After 2 or 3 hours,
the DVD player will have warmed up and evaporated any moisture.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth
to wipe it dry. Do not use any type of solvent, such as thinner or benzine, as they may damage
the surface of the DVD player.
If you use a chemical saturated cloth to clean the unit, follow that product's instructions.
To obtain a clear picture
The DVD player is a high technology, precision device. If the optical pick-up lens and disc drive
parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we
recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours
of use depending on the operating environment.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of controls
See the page in
for the details.
Front panel(Fold down design panel )
Display
POWER button
11 12
DVD/RADIO
5
12
OPEN button
VOL(+,-) button
18
MEMORY/MUTE
17
ENTER
SKIP button
SEEK
18
STOP
15 24
26
11 12
17
PRESET STATIONS
(1~5)
MENU
SCAN/SEL.
26 12
15
AUDIO
REPEAT
17
26 25
PLAY, PAUSE, BAND button
SKIP button
in DVD play mode,
press the SEEK button on the front panel and release the button, the player plays in SKIP 9,: mode;
press and hold the SEEK button for more than 1 second , the player plays in SCAN 7,8 mode.
Number buttons
Only in Radio mode, the number buttons work as 1~5
Loading and ejecting the disc
Press the OPEN button to open the door.
Insert a disc into the Slot and player will start.
Press the Eject button to eject a disc.
Resetting the unit
RESET button
Fold down the front panel and
press the RESET button with a pointed object,
such as a ballpoint pen, as shown.
Disc slot
11
Pressing the RESET button
the unit will be off for a while .
After that playback starts from Radio.
So pressing the RESET button
will erase some stored contents.
Eject
Eject button
Front panel
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of controls
DVD display
Repeat indicator
Dolby Digital indicator
Band indicator
Operating status indicator
MP3/DVD/VIDEO CD indicator
dts indicator
AMFM
ST
DVD
Chapter indicator
Total playing time/elapsed indicator
Title indicator
The indicators vary depending on the kinds of discs you play.
Audio CD
DVD video disc
VIDEO CD
When loading :
Example
When loading :
When loading :
Example
Example
DVD
Playing chapter
3 in title 2
Total playing time
of the disc
Total playing time
of the disc
Total number of tracks
Total number of tracks
During playback:
Example
During playback:
During playback:
Example
Example
DVD
Elapsed time of
the current title
Playing chapter
3 in title 2
Playing track 3
Elapsed time of
the current track
Playing track 3
Elapsed time of
the current track
Some DVD video discs may not display
the chapter numbers
Other indicators
: When playing back the same title, chapter , track or the entire disc repeatedly.
: During Dolby disc playback.
: During dts disc playback.
: When mute functions is engaged.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of controls
Full direction Remote control
The instructions in this manual describe the functions on the remote control.
See the page in
for the details.
Remote control operation
The button
on the remote
POWER
Power on/off .
11
Playing without sound
17
21
17
MUTE
Using the on-screen display
DISPLAY
To play repeatedly
RPT.
1
2
3
4
8
Select the desired channel with
the number button directly
5
9
6
0
7
10+
12
16
CLEAR
SUB
Clear the wrong number you entered
Selecting Subtitle
20
20
ANGLE
Selecting the camera angle
For DVD discs, to selecting a playback audio setting
AUDIO
For VCD discs, to change the audio channel
19
Locate a location by entering its
corresponding track number,
chapter number or time
GOTO
14
Joy Stick
To change the playback speed
13
15
15
To locate preceding/succeeding chapter or track
Locating a specific title chapter or track
TITLE/MENU
SETUP
Function setup
22
23
To pause playback/play
To stop playback
12
12
18
18
16
10
To select the audio functions
SEL
Note: Refer to the Page 26 for
the instruction in Radio mode;
Before you connect external
remote sensor to the player,
power off the unit first .
VOL+, -
To control the volume
PLAYMODE
Play mode: PBC; Program;Off; Shuffle
To turn on or off the amp.
AMP SEL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
When using remote control
Preparing the remote control
Insert the batteries into the remote control so you can use it to operate the DVD video player.
Make sure to match the +and - on the lithium button cell(3V, CR2025) to the marks inside the
cell compartment.
1) Open the cover,
pull the cover as illustrated
2)Insert cell (3V),Close the cover
Operating with the remote control
1)This section shows you how to use the
remote control. Point the remote control
at the remote sensor and press the buttons.
Not used when using the remote sensor
on the remote control eye jack.
With about 4m
The remote range: about 4m from the front
of the remote sensor.
(Is) off axis: more than 30L in each direction
of the front of the remote sensor.
DVD player
2) Remote sensor and remote control eye jack
Connect the remote control eye jack to the
remote sensor unit.
Remote sensor
Remote eye jack
Double-side tape
Do not expose the remote sensor of the DVD player to a strong light source such as direct
sunlight or other illumination. If you do so, you may not be able to operate the DVD player via
the remote control.
Notes on battery
To operate the remote control correctly, follow the instructions below.
Do not insert cell into the remote control in the wrong direction.
Do not charge, heat, open, or short-circuit the cell. Do not throw cell into a fire.
If the remote control does not function correctly or if the operating range becomes reduced,
replace all cell with new one.
Notes on the remote control
Direct the remote control at the remote sensor of the DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Outlet wires connection
(supplied)
ON
OFF
13
5
7
6
8
9
1
2
3
4
10
11
12
13
1 YELLOW CABLE [VIDEO/AUDIO]:
VIDEO OUT(YELLOW);
DIGITAL AUDIO OUT(ORANGE /YELLOW) [Go to page 9]
AUDIO OUT: Red right; White left [Go to page 9]
2 BLACK CABLE [AMPLIFIER]:
3 PURPLE CABLE :
POWER
AMPLIFIER TURN ON(Purple with white stripe)
POWER SCREEN
ANTENNA (Purple)
4 PURPLE CABLE :
5 BROWN CABLE:
6 GREEN CABLE [FRONT LEFT SPEAKER] : GREEN(+);
GREEN WITH WHITE STRIPE(-)
7 GREY CABLE [FRONT RIGHT SPEAKER]: GREY(+)
GREY WITH WHITE STRIPE(-)
8 BROWN CABLE [REAR LEFT SPEAKER]: BROWN(+)
BROWN WITH WHITE STRIPE(-)
9 BLUE CABLE [ REAR RIGHT SPEAKER]: BLUE(+)
BLUE WITH WHITE STRIPE(-)
10 RED CABLE [POWER]:
11 BLACK CABLE [GROUND]:
12 YELLOW CABLE :
12VOLT(+), ACCESSORY/SWITCHED
GROUND
(+)12 VOLT, CONSTANT
13 BLACK BOX :
EQUIPPED WITH FUSE AND FILTER
SAME COLOR AS THE CABLE TERMINAL
14 INSULATING COVER:
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a monitor and speakers , or audio system
Antenna jack
Remote sensor and remote control eye jack.
Connect the remote control eye jack to the
remote sensor unit.
Note:
1)Refer to the amplifier’s owner’s manual
and set the Functions Setting ( Audio, Digital out)----See page 23.
2)When playing DVD video discs or audio CDs encoded
via the DTS recording, please use the coaxial cable .
And the Audio Setting please refer to page 19.
3)When using the audio cable ,do not connect the coaxial cable
or speaker cable.
Front speaker
Front speaker
Rear speaker
Center speaker
Rear speaker
Sub woofer
Amplifier equipped with
a Dolby digital decoder , or
a DTS decoder, or
Signal flow
an MPEG 2 audio decoder
(Sold separately)
VIDEO OUT
TV or Monitor
75Ωcoaxial cable
FM modulator
or amplifier
AUDIO OUT
Power Antenna
Amplifier Turn On
Power Screen
Front speaker
Front speaker
Left
Grey
Green
Grey/White
Green/White
Right
Brown
Blue
Blue/White
Brown/White
Rear speaker
Rear speaker
12 Volt(+), Accessory/Switched
Ground
Power Supply
Filter/Fuse
+12 Volt, constant
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting
AMP Select
Press AMP SEL button on the remote repeatedly, select the amplifier mode
you need ( depending on the connection mode).
AMP mode
Connection mode
Display on pannel
Press
Using the speaker cables
I
AP On
AP On
AMP SEL
to select
the mode
you need
Connecting PURPLE with white
stripe cable to the Remote eye
jack on the rear of Amplifier,
or using the Audio / coaxial cable
E
Connecting the Audio cable to
the monitor or audio system
(refer to page 9)
A AP OFF
A AP On
Any connection mode
Note: Setting to ALL, the player will be in high consumption.
So we advise to select the right mode for your connection mode.
Note on Connecting
NOTE 1
1)THE DVD PLAYER USES 12V DC AND THE COVER IS GROUNDED.
2)THE DVD PLAYER HAS A HIGH-POWER 4 CHANNEL BUILT IN AMPLIFIER.
THE SPEAKER CABLES USED MUST BE A MINIMUM OF 18 GAUGE CABLE,
IF ONLY CONNECTING 2 SPEAKERS, YOU MUST CONNECT THE 2 FRONT
SPEAKERS (FL, FR) OR 2 REAR SPEAKERS (RL, RR).
3) THE UNUSED SPEAKER CABLES MUST BE PROPERLY INSULATED WITH TAPE OR
TERMINATING CONNECTORS TO AVOID A SHORT.
NOTE 2
1 Refer to the owner's manual for " the connected monitor " as well.
2 Connect the DVD video player to your monitor directly. If you connect the DVD player to a
VTR, TV/VTR combination or video selector, the playback picture may be distorted as DVD
discs are copy protected.(refer to " NOTE ON LOCATING" )
NOTE 3
1 Refer to the owner's manual of the connected equipment for additional information.
2 When you connect the DVD player to other equipment, be sure to turn off the power .
3 If you place the DVD near a tuner or radio, the radio broadcast sound might be distorted.
In this case, place the DVD player away from any other tuner or radio.
4 The output sound of the DVD player has a wide dynamic range. Be sure to adjust the
receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by
a sudden high output.
5 Turn off the amplifier before you connect or disconnect the DVD player's power leads.
If you leave the amplifier power on, the speakers may be damaged.
1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
This section shows you the basics on how to play a disc.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the
monitor screen while playing a DVD disc. This distortion is because the high resolution picture
depends on the monitor you use with this DVD player. You should generally reduce the sharpness
adjustment on your monitor when viewing DVD discs.
VCD
CD
DVD
MP3
About
VCD
CD
DVD
MP3
The
icons on the heading bar show the playable discs for the functions
described under that heading.
MP3
CD
DVD
:You can use this function with MP3 discs .
:You can use this function with CDs .
:You can use this function with DVD discs.
VCD
:You can use this function with VIDEO CDs.
DVD
VCD
CD
MP3
Basic playback
Preparations
When you want to view a disc, turn on the monitor and select the video input connected to the
DVD player.
When you want to enjoy the sound of discs from the audio system, turn on the audio system and
select the input connected to the DVD player.
For connection details, see"Connections".
1. Press PWR on the front panel or POWER on the remote
The DVD player turns on
2. Press the OPEN button to open the door.
Place the disc (with the playback side down) into the disc slot
Place the disc in the slot, the disc will go into the slot automatically. Do not push the disc into the
slot fast, doing so may cause the loader to malfunction.
The disc spins and playback starts.
If you insert a DVD disc that contains a title menu, or insert a PBC - equipped VIDEO CD,
a menu screen may appear.
--To start playback of a PBC- equipped VIDEO CD from the menu screen,
set"PBC" to "on" via the on-screen displays with MENU button.
--To start playback of a DVD disc from the menu screen,
press the TITLE or MENU button ( depending on the actual DVD discs.)
note: Do not put any objects other than discs into the disc slot, doing so may cause the player
to malfunction.
3. Press the OPEN button to open the door.
Press
button
The DVD player ejects the disc automatically.
Press
button again the disc goes into the slot automatically.
1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
To start playback from the menu screen
1 Press5/6/3/4 or the number buttons on the remote to select the title you want.
-- title number over 10
To input 13: press 1 and 3 .
-- MP3 discs
To input 25: press 2 and 5 ;
To input 112: press 1and 1then2.
ENTER
SEEK-
SEEK+
2 Press ENTER button
The DVD player begins playback from the selected title.
When not using the menu screen of a PBC- featured VIDEO CD,
set "PBC" to "off " via the on-screen displays.
To pause playback
Press
or
during playback.
To resume normal playback, press this button again.
Each time you press
or
, change PAUSE, PLAY mode in turn.
To stop playback
Press STOP
.
To remove the disc
Press EJECT button .
The DVD player ejects the disc automatically.
To power on/off the player
1 During playback , press PWR on the front panel more than 1 second or press POWER
on the remote. the player power off.
2 After the player power off, press PWR or POWER button again, the playback starts.
Play position memory function
Even if you turn power off or switch the ignition key to OFF during playback or change
the video source, playback will continue from the point where playback stopped when
the power is turned ON again.
The play position memory is released if the disc is removed or the Reset button is pressed.
Note: press PWR on the front panel less than 1 second,
the playback changes between DVD player and Radio mode.
If you do not power off the unit before turning off the ignition,
the unit will power on from the beginning regardless of the mode(DVD, Radio)
where you turned off the ignition.
About this owner's manual
This owner's manual explains the basic instructions of this DVD player. Some DVD
discs are produced in a manner that allows specific or limited operation during playback.
As such, the DVD player may not respond to all operating commands. This is not a
defect in the DVD player. Refer to the instruction notes of discs.
"
"may appear on the TV screen during operation.
A "
" means that the operation is not permitted by the DVD player or the disc.
1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
DVD
VCD
CD
Playing at various speeds
Press 7or8 on the remote during playback, or press and hold the SKIP button
on the front panel for more than 1 second , the player plays in 7,8 mode.
Each time you press the7 or8 button, the playback speed changes.
8: Fast forward playback
On Screen
X20 the
normal speed
X4 the
normal speed
X8 the
normal speed
X2 the
normal speed
X20
X2
X8
X4
7: Fast reverse playback
On Screen
X2
X4
X8
X20
Press PLAY return to the normal speed playback .
Notes
The DVD player does not play sound and subtitles during reverse and forward scan of
DVD discs or VIDEO CDs.
However, the DVD player plays sound during fast forward or fast reverse play of audio CDs.
1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
DVD
VCD
MP3
CD
Resuming playback from the same location
You can stop playback and resume playback later from the same location on the disc.
1 Press STOP at the location where you want to
interrupt playback. The DVD player memorizes the location
where playback is stopped. STOP(Play to resume) appears on the screen.
2 Press PLAY
The DVD player resumes playback from the location where you stopped playback.
To start playback from the beginning regardless of the location where you stopped playback.
1 Press STOP twice.
The DVD player's memory is cleared.
2 Press PLAY.
Playback starts from the beginning of the disc.
Note
The DVD player's memory is also cleared when:
--the POWER turns off after you stop playback.
--You eject the disc .
DVD
VCD
CD
Playing from the desired location
You can play a disc from the desired location.
Locating a specific location by entering the track number, the chapter number or the time.
You can locate a specific location by entering its corresponding track number, chapter number,
or time( hours, minutes, seconds).
1 While playing press GOTO , for different discs the on-screen display changes as follows:
DVD
Search
Time:
TM/CH/TL
_ _:_ _:_ _
Elapsed time
Chapter: _ _
Title: _ _
VCD(PBC OFF)/CD
Press GOTO:
Press GOTO again:
Disc Search
Time: _ _:_ _:_ _
Track: _ _
Track Search
Time:
_ _:_ _:_ _
VCD (PBC ON)
Track Search
Time:
_ _:_ _:_ _
2 Press ENTER
The DVD video player starts playback from the desired location your entered.
Note
Some discs may not respond to this process.
Some scenes may not be located precisely as you specified.
This method for accessing specific locations is available only within the current title of the
DVD disc or within the current track of the VIDEO CD/audio CD.
1 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
VCD
DVD
CD
MP3
Locating a specific title, chapter, or track
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters.
VIDEO CDs and audio CDs are divided into tracks, you can quickly locate any specific title,
chapter, or track.
DVD disc
VIDEO CD/Audio CD
Title1
Title2
Chapter1
Chapter2
Chapter1
Chapter2
Track1
Track2
Chapter3
Track3
Track4
Nffff
Track5
Nffff
Nffff
Nffff
Nffff
If a DVD video disc contains a title menu, you can locate a specific title using the title menu
function.
1 Press TITLE or MENU. (depending on the actual DVD discs)
The title menu appears on the screen.
2 Press 5/6/3/4 to the title you want .
If the titles in the menu are assigned a number, you can directly locate a specific title by pressing its
designated number with the number buttons.
3 Press ENTER
The DVD player starts playback from chapter1 of the selected title.
Note
The instructions above describe basic procedures which may vary depending on the contents of
the DVD disc. If different instructions appear on the screen, follow those instructions.
If a DVD disc contains a chapter menu, you can locate a specific chapter using
the chapter menu function.
1 Press MENU .
The CHAPTER menu appears on the screen.
2 Press 5/6/3/4 to the chapter you want .
If the chapters in the menu are assigned a number, you can directly locate a specific chapter by
pressing its designated number with the number buttons.
3 Press ENTER
The DVD player starts playback from the selected chapter.
If a VIDEO CD contains a track menu, you can locate a specific track using the track
menu function.
Press MENU, in PBC on mode
1 Playing a VIDEO CD ,The track menu appears on the screen.
2 Press 9or: to see the preceding or next page of the menu, press the corresponding number
buttons of the track you want.
Press TITLE, in digest mode
The digest menu of the disc appears on the screen.
--Press 3or4to see the preceding or next digest, or
--press the corresponding number buttons of the digest you want
Press ENTER , the DVD player starts playback from the selection.
You can locate consecutive chapters or tracks.
Press skip 9 or : repeatedly (in title/PBC off mode) to display the chapter or track number you want.
The DVD video player starts playback from the selected chapter or track.
9: To locate preceding chapters or tracks.
When you press the 9 button, the DVD player starts playback from the beginning
of the current chapter or track.
When you press the 9 twice, the DVD player starts playback from the beginning of the
preceding chapter or track.
:: To locate succeeding chapters or tracks.
1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
MP3
DVD
VCD
CD
Play Mode
You can play in deferent mode.
In the stop mode, press the PLAY MODE button on the remote,
the following menu appears on the screen.
And with the ENTER button you can change the mode as: PBC( for VCD), Program, Off, Shuffle.
When you select one mode, move the cursor to OK then press ENTER.
1) For Program, the playback starts in program mode.
Play Mode
Mode
OK
PBC
2) Press PLAY button,
For PBC, the playback starts in PBC on mode.
For Off, the playback starts in no mode.
For shuffle, the playback starts random.
Cancel
You can combine your favourite titles, chapters, or tracks and play them in any order.
You can program up to 16 selections into the memory. (program playback)
The DVD player automatically plays titles, chapters, or tracks in the order of your program.
1 Select PROGRAM play mode, the following menu appears.
Play DVD
Program Title/Charpter
Program Title/Charpter
1
_ _ _ _ 5 _ _ _ _ 9 _ _ _ _ 13 _ _ _ _
_ _ _ _ 6 _ _ _ _ 10 _ _ _ _ 14 _ _ _ _
_ _ _ _ 7 _ _ _ _ 11 _ _ _ _ 15 _ _ _ _
_ _ _ _ 8 _ _ _ _ 12 _ _ _ _ 16 _ _ _ _
1
2
3
12
1
5 10
1
9
4
2
13 _ _ _ _
2
3
4
_ _ _ _ 6 _ _ _ _ 10 _ _ _ _ 14_ _ _ _
_ _ _ _ 7 _ _ _ _ 11 _ _ _ _ 15 _ _ _ _
4_ _ _ _
8_ _ _ _ 12 _ _ _ _ 16 _ _ _ _
Play Program Clear All Cancel
Play Program Clear All Cancel
Play VCD , CD
Program Track
Program Track
1
2
3
_ _ _ 5 _ _ _ 9 _ _ _ 13 _ _ _
_ _ _ 6 _ _ _ 10 _ _ _14_ _ _
_ _ _ 7 _ _ _ 11 _ _ _ 15 _ _ _
1
2
3
15
5
17
9
1
13 _ _ _
_ _ _ 6 _ _ _ 10 _ _ _ 14_ _ _
_ _ _ 7 _ _ _ 11 _ _ _ 15 _ _ _
4 _ _
_
8 _ _ _ 12 _ _ _ 16 _ _ _
4 _ _ _ 8_ _ _ 12 _ _ _ 16 _ _ _
Play Program Clear All Cancel
Play Program Clear All Cancel
2 Each time you press the5634button, the _ _ indication is highlighted in turn. Highlight where
you want to enter then press the number buttons( The selected number must be less than the title,
chapter or track number).
3 Move the cursor to Play Program and press ENTER button ,
The DVD video player starts program playback.
4 To change the programmed selections While the PROGRAM menu appears on the screen,
press the 56button to move the highlighted bar to the item you want to change, then you can
press the number buttons. Or press the CLEAR button.
5 To cancel the programmed selections,
With (Clear All) highlighted, press ENTER button.
6 To program during playback
If you enter the play mode during playback, and the program menu appears to accept your
programming.
NOTES
Some discs may not permit program playback operation.
If you press the REPEAT during program playback,
the DVD video player repeats current program playback.
If you press the SKIP9、:，the player will skip to the preceding or the next item.
You cannot select title, chapter, and track numbers not included on the disc.
The programmed selections will be cleared when:
--you turn off the DVD player, or
--you remove the disc.
1 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
VCD
CD
DVD
MP3
Playing repeatedly
Repeating a title, chapter, or track
You can play the same track or disc repeatedly.
While playing, each time you press the RPT. (REPEAT) button, the repeat mode changes as follows.
Playing VCD/ CD/MP3
Playing DVD
Repeats the same
track
Repeats the same
chapter
Chapter
Single
All
Repeats the same
title
Repeats the entire
disc
Title
Off
Resumes normal
playback
Resumes normal
playback
Off
Note: Some discs may not permit repeat operation.
DVD
VCD
CD
MP3
Playing without sound
While playing a disc
--Press MUTE button.
The player plays the disc without sound
--Press MUTE again, or
change the sound by pressing VOL+ or VOL-, or pressing AUDIO twice,
the player plays with sound(except MP3 disc).
1 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
DVD
VCD
CD
MP3
Selecting sound
With the VOL+, VOL- button, you can change the volume.
When the setting appears on the screen, press 34 to change the volume.
Volume changes from 0 to 36:
Volume
36
In radio mode, VOL XX( volume level 0~36) appears on the front panel.
NOTE:
The VOLUME setting is not cleared when:
1) you turn the power off,
2) you eject the disc
3) you change the disc.
Adjust SOUND as you like:
Press the VOL +,- button
adjust the setting
as you like
To
Press SEL button repeatedly
the item you want to adjust appears
on the panel Display
Balance
Bass
BAl
BAss xx
trE xx
FAd xx
Loud
xx
xx changes from -8~8
xx changes from -7~7
xx changes from -7~7
xx changes from -8~8
Treble
Fader
Loudness
x
0(or 1), press ENTER button
to select the item.
0 for loud off, 1 for loud on
NOTE:
Using the SEL button on the front panel, please press this button less than 0.5 seconds
and release the button to choose the sound effect.
1 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
VCD
DVD
Selecting a playback audio setting
Good morning!
Bonjour!
!
Buenos dias!
FOR DVD DISCS
You can select a preferred language from those included on the disc.
1 While playing press AUDIO, the current audio setting appears.
2 Each time you press the AUDIO, the audio setting included on the DVD video disc changes.
1/4 Eng
2Ch
Audio channel
Recording system
Language
Total audio number
Current audio number
When playing the discs in the Dolby digital and DTS system, please select the AUDIO mode in Dolby.
If you select DTS, be sure to use the coaxial cable and connect to DTS equipped amplifier.
Please see page 9.
FOR VCD DISCS
With the AUDIO button and the instructions appear on the screen, you can change the AUDIO Mode.
Press the AUDIO button, the setting appears on the screen: L/R Mode
Stereo
L/R mode highlighted，press ENTER to change the audio channel.
L/R mode changes as following: Stereo, Left, Right, Mix.
1 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
DVD
Selecting the camera angle
ANGLE [1/2]
ANGLE [2/2]
You can select a preferred camera angle to watch a scene.
If the scene was recorded from multiple angles, you can easily change the camera angle of the scene
you are watching.
1 Press ANGLE button , if the total angle number included on the disc is more than 1,
then the angle icon is displayed.
X/X
Total angle number
Current angle number
2 Each time you press the ANGLE button , the camera angle changes.
NOTE
If you pause a picture immediately after changing a camera angle, the resumed playback picture may
display the new camera angle.
DVD
Selecting subtitles
!
Good evening!
Bonsoir!
Buenas tardes!
You can display subtitles on the screen and select a preferred subtitle language.
Each time you press the SUB(SUBTITLE) button, the subtitle languages
included on the DVD disc change.
1/3 Eng
Current subtitle language
||||||||||||||||||
Current subtitle language number
2/3 Fre
||||||||||||||||||
Total subtitle language number
Off
||||||||||||||||||
NOTE
Some DVD discs are set to display subtitles automatically, and you cannot turn them off
even if you set the subtitle function to off.
During some scenes, the subtitles may not appear immediately after you press SUB button.
Some DVD discs will allow you to make subtitle selections and turn subtitles on or off
only via the disc menu.
During some scenes, the subtitles may not appear immediately after you change the language
by pressing the SUB button.
2 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
DVD
VCD
CD
Using the on-screen display
You can view information about a disc and its operational status on the screen.
Checking the operational status
Press the DISPLAY button, the on-screen display on the screen.
1 Playing VIDEO CD/ CD
X:XX:XX X:XX:XX
VCD
X:XX:XX X:XX:XX
TRACK X / X
Elapsed time
Remaining time of the current track
Elapsed track
Total track number
Disc type
2 Playing DVD
DVD
x:xx:xx x:xx:xx
X:XX:XX X:XX:XX
Title x/x Chapter x/x
Angle 1/1
2Ch
Audio
1/4 Eng
1/3 Eng
||||||||||||||||||
Subtitle
Elapsed time
Remaining time of the current title
Elapsed chapter and total chapter number
Elapsed title and total title number
：Angle，refer to “Selecting the camera angle”
Audio: refer to “Selecting a playback audio setting”
Subtitle: refer to “Selecting subtitle”
Disc type
2 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
CD
DVD
MP3
VCD
Customizing the function settings
Press SETUP during stop. The setting menu appears.
Press 5,6,3,4 button to move the cursor to the item,
then press ENTER to select the item you want.
Language
Video
Audio
Rating
Language
Language Video Audio Rating
OSD Menu English
English
English
English
Auto
Off
Subtitle
Audio
English
English
English
DVD Menu English
OSD On
Off
Video
Language Video Audio Rating
TV Shape 4：3 Pan Scan
4：3 Pan Scan
4：3 Letter Box
16:9
TV System NTSC
NTSC
PAL
PAL M
AUTO
TV Shape
--4:3 LETTERBOX: Select when 4:3 TV is connected
displays theatrical images with
masking bars above and below
the picture.
--4:3 PAN-SCAN: Select when a 4:3 TV is connected.
Display pictures cropped to fill
your TV screen. Either or both sides
of the picture are cut off.
--16:9 WIDE: Select when a 16:9 wide TV is connected.
TV System
You can select the TV System for your TV, depending on the actual DVD discs.
Note: If some picture noise not usually visible while playing a DVD disc,
please pick the right TV system for this disc.
2 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Audio
Language Video Audio Rating
Off
PCM
Raw
Digital Audio
Dolby D
DTS
Off
Off
Raw
Off
Off
PCM
MP3
Off
Off
Off
PCM
Raw
Others
When using the coaxial cable(see page9), you should set Digital Out PCM or Raw.
Refer to the amplifier’s owner’s manual and make the setting Raw or PCM.
Select one mode, if there is no sound change to the other one.
Rating
Language Video Audio Rating
Password - - - -
Rating
1 Kid Safe
2. G
3. PG
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult
The player without the default password. Press the number button to create or change your 4-digital
security password to change the rating, input numbers are displayed” * ”. Then, you must enter the
correct password to change the rating or you can not play DVD video disc rated higher than the level
you selected.
This is the function of DVD for restricting the viewing age as stipulated by laws in different countries.
The way in which viewing is restricted differs from DVD to DVD. Sometimes the DVD can not be
played at all, other times certain scenes are skipped, and the other times certain scenes are
replaced with other scenes.
NOTE: Press EJECT button. While logo appears on the screen, press the buttons RPT. , AUDIO
on the front panel at the same time, the function settings return to FACTORY SETUP.
2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Instruction
Insert the MP3 disc then playback start, the MENU of elapsed track appears.
MP3
Track XX/XXX
XX:XX:XX
Total track number
Elapsed track
1 TRACK25
8
9
TRACK32
TRACK33
2 TRACK26
3 TRACK27
4 TRACK28
5 TRACK29
6 TRACK30
7 TRACK31
10 TRACK34
11 TRACK35
12 TRACK36
13 TRACK37
14 TRACK38
Set the MENU on or off by pressing the MENU button on the remote.
Press
Mode
Play
When the MENU is not on the screen,
To play the preceding or the next track
9 :
To select the track with the number button on the remote
directly, then press ENTER button to play the track
Number button
ENTER button
To move the cursor to the track you want to play,
then press ENTER to play the track.
3 4
Stop/
Play
Number button
ENTER button
To select the track with the number button on the remote
directly, then press ENTER button to play the track
2 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation
PWR DVD/RADIO button
VOL(+,-) button
Front panel operation
OPEN
PWR
MULTI-MEDIA DISC PLAYER RECEIVER
DVD/RADIO
ST
VOL
SKIP
SEEK
Current band
MEMORY
SCAN
STOP
MENU
ENTER
RPT.
AUDIO
BAND
ST
FM
MUTE
Current
frequency
SEEK button
BAND button
MEMORY/MUTE
SCAN/SEL
Current station
Storing Preset Station
1 Selecting radio mode
Press the DVD/RADIO button less than 1 second to switch from DVD player mode to the radio mode.
FM F1 or FM F2 or FM F3 or MW A1 or LW A2
( the preceding situation)
DVD player
Each time the BAND button is pressed ,
the selected band changes as shown below
(except in SCAN stations mode)
F1
F2
F3
A1
A2
While playing in FM situation Stereo mode,
the indicator ST on the front panel display illuminates
Press the DVD/RADIO button less than 1 second to switch from the radio mode to DVD player mode.
FM F1 or FM F2 or FM F3 or MW A1 or LW A2
DVD player
( the current situation)
2 Radio tuning
Automatic tuning
Select the desired band.
Press the SCAN button on the front panel more than 1 second or the SCAN button on the remote
the system will start automatic tuning and play each receivable stations for several seconds,
press SCAN button less than 0.5 seconds, stop automatic tuning.
When playing the desired frequency, press MEM button more than 1 second then the number button
( from 1~5) , you can save the station with your desired number.
Selecting stored stations
The MEM(MEMORY) can be used to store 5 stations in each band(FM/MW/LW) for convenient
access to your favourite stations.
Select the desired channel (from ch1~ch5),
press one of the 1~5 number buttons on the front panel or on the remote.
Manual tuning
This feature is useful when you want to check the signal strength.
1)Select the desired band.
2)--To quickly scan up or down in frequency, press and hold the SEEK button on the front panel for
more than 1 second.
Release the button and the display approaches the desired frequency automatically ,
--To select frequency finely, each time press the SEEK button on the front panel less than
0.5 seconds, and release the button the display steps up the desired frequency .
--Press MEM button more than 1 second then press the number button( from 1~5) on the
front panel ,you can save the desired station with your desired number.
2 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation
3 (Auto Travel Preset) operation
When you are driving in an unfamiliar location and want to memorize local stations without
changing the standard preset stations(5 FM F2 and 5 LW A2).
A total 10 stations (5 FM F2 and 5 LW A2) can be programmed.
To set the stations ....see the [ the RADIO TUNING on page 25]
4 Adjusting the volume
Turn up or down the volume with the button VOL+, VOL-.
1.If no station can be received, " ----- " appears in the display for the empty channel.
2.If fewer than 5 stations can be received, the system will memorize as many
stations as possible, then playback starts from the first channel.
3. You can select Auto Travel Preset mode in FM F2(or F3) and LW A2
or [FM F1(or F3) and MW A1] band.
4.Press the number SEL button, you can adjust the sound of the radio.
Remote control operation
The button
on the remote
Press the button on the remote
Power on/off .
Power on from the beginning regardless of the mode
(DVD, FM, MW,LW) where you power off.
POWER
Switch between the radio mode
and DVD player mode.
DVD/
RADIO
In radio mode, select the desired
channel (ch1~ch5) with the number
button (1~5)directly
1
5
2
3
4
Start automatic tuning and play each receivable stations for several seconds
store the desired station by press the MEM button and favour number button .
SCAN
In radio mode, Press the BAND button you change the current band to others in turn:
BAND
F1
F2
F3
A1
A2
In MW band, press SETUP button,
change to MW-530(10K), MW-531(9K)in turn. If the receiving range of your location is 531~1710K(Hz)
tuning step is 9K(Hz). If the range is 530~1710K,the step is 10K. If you are not sure the range of your
location, and you can not receive station in current range, try the other range.
1)In radio mode
2)To quickly scan up or down in frequency, press the SEEK button Release the button
and the display approaches the desired frequency automatically .
3) store the desired station by press the MEM button and favour number button
1)In radio mode
2)To select frequency finely, press the SKIP button. Each time you press the button the
frequency tune up or down in frequency.
3) store the desired station by press the MEM button and favour number button
Store the current station
Select the audio functions: bass, treble, balance, fader, loudness
Turn up or down the volume
2 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Safety
As the laser beam used in this unit is harmful to the eyes, do not attempt to
disassemble the unit. Refer servicing to qualified personnel only.
Should any solid object or liquid fall into the cabinet, unplug the player and
have it checked by qualified personnel before operating it any further.
Power sources
The operating voltage is indicated on the nameplate at the cover of the player.
If you are not going to use the player for a long time, be sure to turn off the unit.
Placement
Place the player in a location with adequate ventilation to prevent heat
build-up in the player.
Do not place the player in a location near heat sources, or in a place subject
to direct sunlight, excessive dust or mechanical shock.
Operation
If the player is brought directly from a cold to a warm location, or is placed in
a very damp room, moisture may form on the lenses inside the player.
Should this occur, the player may not operate properly. In this case, remove
the disc and leave the player turned on for about an hour until the moisture
evaporates.
Cleaning
Clean the unit, panel and controls with a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzine.
2 7
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES on discs
How to deal with discs
How to hold a disc
Do not touch the surface of the information side.
When there are stains on the face of disc
Wipe with a wet cloth and then with a dry one.
Wipe from the center of the disc to the outer edge.
When a disc is brought from a cold environment to a hot one, there could be
steam on the face of disc. Wipe with a dry, soft, smooth cloth before using.
Attention
Do not write on dics. Do not use pickup cleaning preparation. Phenyl, chemical solution,
dispersing solution, anti-static electricity solution or any other kind of solutions to clean disc.
Do not stick label or glue based note on disc
( Do not use disc with remaining glue or damaged gluey label).
Do not use scrathing-preventing material or cover, unless it is assigned to use on this machine.
Do not put or store the disc in the following environments: direct sunlight, at moist or
dusty places, near vents where hot air is blown.
2 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any of the following difficulties while using the player, use this
troubleshooting guide to help you remedy the problem. Should any problem
persist, consult a professional mobile video installer.
There's no sound
1 Check that the player is connected securely and correctly.
2 Make sure you operate the monitor or the amplifier correctly.
There's no picture
1 Check that the player is connected securely.
2 Make sure you operate the monitor correctly,
turn on the monitor and select the VIDEO mode.
Do not play
1 There's no disc inside("NO DISC" appears).
Insert a disc.
2 Insert a disc with the label side up in the disc slot correctly.
Clean the disc.
3 The disc has been shattered, change the disc.
4 Moisture has condensed inside the player.
Remove the disc and leave the player turned on for 2 or 3 hours .
The remote doesn't function
1 Remove the obstacles in the path of the remote and the player.
2 Point the remote at the remote sensor on the player.
3 Replace the battery in the remote with new one if it is weak.
If you forget the password
Press EJECT button. While logo appears on the screen,
press the buttons RPT. , AUDIO on the front panel at the same time,
the function settings return to FACTORY SETUP.
2 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Audio
Audio output(analog):
Audio output(digital):
2±0. 2V 100kΩ
0.5V 75Ω
Signal-to-noise ratio: more than 90dB
Dynamic range:
Distortion:
more than 90dB
less than 0.05%
Video
Video output:
Resolution:
1±0. 2V
more than 500 line
load impedance:
4Ω
Speaker output
+20%
-10%
Power requirement: DC 12V
Power
Power consumption: less than 15W ,
or less than 100W ( all speakers on , see CONNECTIONS )
TUNER SECTION
FM
Frequency range
Usable sensitivity
87.5~108MHz
10dBf
Signal-to-Noise ratio
Antenna impedance
50dB
75Ω
MW/LW
Frequency range
MW: 530KHz ~1710KHz
LW: 144~279 KHz
Usable sensitivity(S/N 20dB) MW: 35 μV
LW: 40 μV
S/N ratio
40dB
Antenna impedance
75Ω
General
Dimensions(approx.):
Weight:
178x50x177mm
(w/h/d) incl. Projecting parts
1.5Kg
Normal operating temperature range: 14F to120F
Design and specifications are subject to change without notice.
The illustrations in this manual may appear different
from the actual product due to printing conditions.
3 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories and Hardware
Installation
Mounting Bracket
(Half Sleeve) X 1
Rear Strap
(Brace) X 1
Hex bolt M5 x 14
X 2
Mounting Screw M5
(equipped on the
rear of the unit)
Mounting Grommet
X 1
X 1
Set Removal
Removable Trim Ring
equipped on the unit
X 1
Unlock Levers
X 2
CABLE
Connection cable x 1
REMOTE CONTROL
CLOCK
POWER
RA
D
I
O
/DV
D
CLEAR
D
I
S
PL
AY
0
2
1
3
4
7
5
8
6
A
NGL
E
9
S
T
BAND
P
LA
Y
M
OD
E
+
TITLE
M
EN
U
3
V
ENTER
S
EEK-
SEEK
+
SET
U
P
GOTO
SCAN
SU
MEM
B
A
U
D
I
O
+
VOL
_
SEL
M
U
T
E
Lithium Button Cell(3V)
x 1
Remote sensor x 1
Remote control x 1
3 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Remove this CD
stopper before use.
Apply the paper
cover (supplied) on
the screw hole to
keep out dust.
Remove this CD
stopper before use.
Apply the paper
cover (supplied) on
the screw hole to
keep out dust.
Two black sticking papers
There are 2 mounting screws on the case of the DVD player( as above figure
shows) to protect the unit during shipping.
You need to remove the sticking papers and screws after unpacking this product.
Apply the black sticking papers(supplied)on the screw holes to keep out dust.
3 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|