PYLE Audio DVD Player PLDVD168 User Manual

PLDVD168  
OWNER'S MANUAL  
Mobile Video System  
REL  
EJ  
LOC  
LOUD  
ST  
LOC  
DISC-RPT  
RND  
INT MUTE  
TRAC  
SW  
FLAT  
CLAS  
ROCK  
POP  
K
MU  
EQ  
CLK  
MON  
BND  
MOD  
SEL  
PWR  
TUNE  
AUX  
DISPLAY  
EJECT  
GOTO  
STOP  
PLAY/PAUSE  
ANGLE  
MUTE  
SUBTITLE  
ZOOM  
AUDIO  
TITLE  
SLOW  
A-B  
REPEAT  
F.FWD  
NEXT  
ENTER  
F.BWD  
PREV.  
1
2
6
9
3
4
5
7
8
SETUP  
+10  
0
DVD/VCD/CD/MP3 PLAYER WITH  
MANUALLY TUNED SYNTHESIZER STEREO RADIO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
CAUTION:  
Region Management InformationRegion  
Management Information:  
THIS DVD PLAYER IS A CLASS I LASER  
PRODUCT. HOWEVER THIS DVD  
PLAYER USES A VISIBLE/INVISIBLE  
LASER BEAM WHICH COULD CAUSE  
HAZARDOUS RADIATION EXPOSURE IF  
DIRECTED. BE SURE TO OPERATE THE  
DVD PLAYER CORRECTLY AS  
This DVD Player is designed and  
manufactured to respond to the Region  
Management Information that is  
recordedon a DVD disc. If the Region  
number described on the DVD disc does  
not correspond to the Region number of  
this DVD Player, this DVD Player cannot  
play this disc.  
INSTRUCTED.  
USE OF CONTROLS OR ADJUSTMENTS  
OR PERFORMANCE OF PROCEDURES  
OTHER THAN THOSE SPECIFIED  
HEREIN MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE. DO NOT OPEN  
COVERS AND - DO NOT REPAIR  
YOURSELF. REFER SERVICINGTO  
QUALIFIED PERSONNEL.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS EQUIPMENT TO RAIN OR  
MOISTURE.  
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE ONLY THE  
RECOMMENDED ACCESSORIES.  
THIS DEVICE IS INTENDED FOR  
CONTINUOUS OPERATION.  
This product incorporates copyright  
protection technology that is protected by  
method claims of certain U.S. patents and  
other intellectual property rights owned  
by Macrovision Corporation and other  
rights owners. Use of this copyright  
protection technology must be authorized  
by Macrovision Corporation, and is  
intended for home and other limited  
viewing uses only unless otherwise  
authorized by Macrovision Corporation.  
Reverse engineering ordisassembly is  
prohibited.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC NOTES  
Disc formats supported by this player  
DVD  
Label side up  
12 cm disc  
(Single-sided disc only)  
Video CD  
12 cm disc  
CD  
12 cm disc  
MP3  
Do not touch  
the underside  
of the disc  
12 cm disc  
Do not bend  
Discs which cannot be played with this  
player  
DVD-ROM  
DVD-R/DVD-RAM  
CDV  
CD-G  
Wipe the disc from center  
toward the outside edge  
Handling and Cleaning  
Dirt, dust, scratches and warping disc  
will cause misoperation.  
Do not place stickers or make  
scratches on discs.  
Preparing New Discs with Rough  
Spots  
Do not warp discs.  
A new disc may have rough edges on its  
inside and outside edges. If a disc with  
rough edges is used, the proper setting  
will not be performed and the player will  
not play the disc. Therefore, remove the  
rough edges in advance by using a ball  
point pen or pencil as shown on the right.  
To remove the rough edges, press the  
side of the pen or pencil against the  
inside and outside edges of the disc.  
A disc should always be kept in its  
case when not in use to prevent from  
damaging.  
Do not place discs in the following  
places:  
1. Direct sunlight  
2. Dirty, dusty and damp areas  
3. Near car heaters  
4. On the seats or dashboard  
Rough spots on  
outside edge  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing)  
alcohol. Never use solvents such as  
benzine, thinner or conventional record  
cleaners as they may mar the surface of  
the disc.  
Ball point pen  
or pencil  
Note:  
A disc may become somewhat scratched  
(although not enough to make it  
unusable) depending on your handle it  
and conditions in the usage environment.  
Note these scratches are not an  
indication of any problem with the player.  
Rough spots  
on inside edge  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Notes:  
Choose the mounting location where the unit will not interfere with the normal  
driving function of the driver.  
Before finally installing the unit, connect the wiring temporarily and make sure it is  
all connected up properly and the unit and the system work properly.  
Use only the parts included with the unit to ensure proper installation. The use of  
unauthorized parts can cause malfunctions.  
Consult with your nearest dealer if installation requires the drilling of holes or other  
modifications of the vehicle.  
Install the unit where it does not get in the drivers way and cannot injure the  
passenger if there is a sudden stop, like an emergency stop.  
If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum  
performance.  
30˚  
Avoid installing the unit where it would be subject to high temperature, such as from  
direct sunlight, or from hot air, from the heater, or where it would be subject to dust,  
dirt or excessive vibration.  
DIN FRONT/REAR-MOUNT  
This unit can be properly installed either from Front(conventional DIN Front-mount)  
or Rear(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the  
unit chassis). For details, refer to the following illustrated installation methods.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
DASH BOARD  
METAL MOUNTING STRAP  
HEXNUT  
SPRING WASHER  
PLAIN WASHER  
PLAIN WASHER  
CONSOLE  
TAPPING SCREW  
SLIDE BRACKET HOUSING  
HEX BOLT  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
HOW TO REMOVE AND INSTALL THE FRONT PANEL  
1. Press the release button and pull-off the front panel.  
Keep the front panel into the case.  
2. To install the front panel, insert the panel into the housing and make sure the panel  
is properly installed, otherwise, abnormalities occurs on the display or some keys  
will not function properly.  
REMOVING THE FRONT PANEL  
FRONT PANEL  
RELEASE BUTTON  
INSTALLING THE FRONT PANEL  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRIC CONNECTION  
WIRING CONNECTION  
FOR 4x7W SYSTEM  
MAIN UNIT  
AUX  
VIDEO IN YELLOW  
RCH IN RED  
LCH IN WHITE  
ANTENNA CONNECTOR  
RCA CABLE  
IGNITION  
SWITCH  
VIDEO OUT 1 YELLOW  
VIDEO OUT 2 YELLOW  
COAXIAL OUT BROWN  
RED  
REAR RCA OUTPUT CABLE (OPTIONAL)  
RCH RED  
CHOKE BOX  
LCH WHITE  
YELLOW  
BLACK  
MEMORY  
BACK-UP (B+)  
FRONT RCA OUTPUTCABLE  
RCH RED  
GREY SUB WOOFER  
LCH WHITE  
GROUND (B-)  
POWER  
ANTENNA  
BLUE  
(FOR RCA LINE OUT VERSION ONLY)  
WHITE  
GREY  
FRONT  
FRONT  
Lch SPK.  
Rch SPK.  
GREY/BLACK  
WHITE/BLACK  
GREEN  
VIOLET  
REAR  
REAR  
Lch SPK.  
Rch SPK.  
GREEN/BLACK  
VIOLET/BLACK  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
11  
13  
1
12  
14  
AUX  
DISPLAY  
EJECT  
GOTO  
2
STOP  
PLAY/PAUSE  
ANGLE  
MUTE  
3
SUBTITLE  
ZOOM  
AUDIO  
SLOW  
A-B  
4
15  
17  
19  
5
7
TITLE  
PBC  
REPEAT  
16  
18  
6
8
F.FWD  
NEXT  
ENTER  
20  
21  
F.BWD  
PREV.  
9
1
2
6
9
3
4
5
7
8
SETUP  
+10  
10  
0
22  
1. GOTO  
2. DISPLAY  
3. EJECT  
Disc search button, cooperatively used with numeric buttons.  
Display statistical disc information during playback.  
Press it to eject the disc. (Eject is enable in Disc Mode only)  
4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle  
language DVD disc.  
5. AUDIO  
Changing of the AUDIO soundtrack on multi-audio soundtrack  
DVD disc. Changing of the sound mode of the VCD/CD disc.  
Press it to zoom the picture in scale x1.5  
Display the TITLE menu that is stored in DVD disc changing  
between PBC ON and PBC OFF on the VCD disc.  
Press to start forward rapidly & to reverse rapidly.  
Cursor buttons in MENU mode.  
6. ZOOM  
7. TITLE  
8.  
9.  
/
/ / /  
10. SETUP  
11.  
Display the SETUP menu.  
Press it to stop playback.  
12.  
13. AUX  
Press once to pause a play, press again to resume playback.  
Press AUX to switch to external A/V input.  
(AUX is enabled in Disc Mode only)  
14. MUTE  
15. SLOW  
16. ANGLE  
17. A-B  
Press it to elimate the sound immediate.  
Changing for slow forward/reverse playback motion.  
Changing of the view angle on multi-angle DVD disc.  
Press it to repeat between two selected sports on DVD or VCD disc.  
Switch the Repeat mode of DVD/VCD/CD disc.  
18. REPEAT  
19  
/
Press  
to skip to the next track & press  
to skip back one track.  
20. ENTER  
Confirm the Track/Chapter selected with the number key or  
selected with the cursor buttons on TV screen.  
Numeric buttons  
21. 0 - 9  
22. +10  
Press it to select 10th digits.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
Preparing the Remote Control  
Inserting the Batteries  
1. Open the battery compartment cover.  
2. Insert the new batteries. Make sure that the positive and negative terminals of the  
batteries are oriented indicated.  
3. Close the cover.  
Using the Remote Control  
Face the remote control towards the player front face IR mark (remote control signal  
receiver).  
Operation angle: About 30 degree in each the direction of the front of the IR mark.  
To prevent damage to the unit, be sure to follow the connection diagram (page 8).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
18  
1
19  
REL  
EJ  
LOC  
MU  
LOUD  
ST  
LOC  
DISC-RPT  
RND  
INT MUTE  
TRAC  
SW  
FLAT  
CLAS  
ROCK  
POP  
K
EQ  
CLK  
MON  
BND  
MOD  
SEL  
PWR  
TUNE  
10 11  
12 13 14 15  
3
4
5
6
7
8
9
2
17  
16  
ON/OFF  
Press POWER button (13) to turn on the unit. Press it again to turn off.  
FACEPLATE RELEASESET  
Press REL button (2) to detach the removable faceplate.  
SET THE CLOCK  
Press CLK button (6) to change the display to clock display. Press it again  
to return to previous display. In clock display, press and hold the CLK  
button (6) for several seconds until the clock display flashes. Press VOL-(11)  
to change minutes or VOL+ (12) to change hours.  
SELECT MODE  
Press SEL button (10) to change audio mode through volume, bass, treble,  
balance, and fader modes. Use VOL + (12) and VOL- (11) buttons to adjust  
the selected mode. When mode has not been adjusted for several seconds,  
display returns to normal radio or CD display.  
VOL  
BAS  
TRE  
BAL  
FAD  
(Volume)  
(Bass)  
(Treble)  
(Balance)  
(Fader)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Volume  
Adjust volume level by using VOL+ (12) and VOL- (11) buttons.  
Note:The unit is initially set to volume mode.  
Bass  
Press SEL button (10) one time. Adjust bass level by using VOL+(12) and  
VOL-(11) buttons.  
Treble  
Press SEL button (10) two times. Adjust treble level by using VOL+(12) and  
VOL-(11) buttons.  
Balance  
Press SEL button (10) three times. Adjust sound balance between left and  
right speakers by using VOL+(12) and VOL-(11) buttons.  
Fader  
Press SEL button (10) four times. Adjust sound balance between front and  
rear speakers by using VOL+(12) and VOL-(11) buttons.  
MUTE  
Press MU button (4) to mute down sound. Press it again to release this  
mode and recover previous volume level.  
SELECT MODE  
Press MOD button (9) to change between radio or disc mode.  
EQUALIZATION  
Press EQ button (5) to turn to equalization function and to select desired  
audio mode. There are four kinds of mode as below:  
FLAT  
CLAS  
ROCK  
POP  
NO EQ  
LIQUID CRYSTAL DISPLAY  
The LCD can show the current state of the unit  
SKIP TRACKS  
Press  
button (19) or  
button (18) to the previous track or the following track. Track  
number shows on the display.  
SELECT STATIONS  
Press and release  
button (19) or  
button (18) immediately to move radio frequency  
button (18) for several seconds to seek the next  
number down or up on step.  
Press and hold  
clear station.  
button (19) or  
FAST FORWARD AND FAST REVERSE  
Press button (19) or button (18) to fast reverse or fast forward. CD play starts from  
when you release the button.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
FLASHING LED  
If the front panel is not on the main unit, LED (16) will be flashing.  
RESET BUTTON FUNCTION  
RESET button (17) is placed on the housing and must be activated with  
either a ballpoint pen or thin metal object. The RESET button (17) is to be  
activated for the following reasons:  
-Initial installation of the unit when all wiring is completed.  
-All the function buttons do not operate.  
-Error symbol on the display.  
Note: If press RESET button (17), the unit cant work yet, please use a  
cotton swab soaked in isopropyl alcohol to clean the socket on the back of  
the front panel.  
RADIO OPERATION  
BAND  
Press BND button (8) to change bands as below:  
FM  
MW  
LW  
FM  
MW  
FM  
AM  
For 3 Bands (Europe)  
SELECT STATION  
For 2 Bands (Europe)  
For 2 Bands (USA)  
Rotate TUNING knob (3) clockwise or anticlockwise to adjust the frequency  
upward or downward.  
LOCAL/DISTANT  
Press the LOC button (1) to select between local setting for reception of  
strong station and distant setting for reception of weak stations when  
tuning.  
MONO/STEREO  
In FM band, press MON button (7) to select mono or stereo reception for  
radio stations. You can sometimes improve reception of distant stations by  
selecting mono operation.  
DISC OPERATION  
Most of the disc operations are controlled by the remote controller.  
Ejecting a Disc  
Press (EJECT) button (15) on the front panel or button on the remote  
control to eject the disc.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Stopping Play  
Pause (still picture)  
- Brief press the (Stop) button to stop  
the unit playback, when press the  
(1P4la)yb)ubtutottnonit ictacnancocnotnintuinouuosunsonromrmalal  
playback.  
Pressing  
during playback will stop  
play temporary. Return to normal  
playback, press  
once again.  
- Press (Stop) button twice, it will stop  
the playback and go back to initial  
Track/Chapter.  
Repeat  
Press the REPEAT button to select  
repeat mode as follow:  
DVD:  
Press the REPEAT button to select  
repeat mode as follow.  
Rapid Forward/Rapid Reverse  
Press  
FFW&D &REWFBduWriDngdpulrainyg. Epalacyh.  
Etimacehtthime beuthtteonbuisttpornesissepdre,sthseds,ptehed of  
srappeieddfoorfwraarpdi/drefvoerwrsaerdch/raenvgeersseachcaonrdgiensg  
atoccthoerddinisgctaosthfoelldowisc. as follow.  
CHAPTER REPEAT ON  
TITLE REPEAT ON  
REPEAT OFF  
DNVoDrm: al Playback  
2X  
4X  
6X  
8X  
VCD/CD  
Press the REPEAT button to select repeat  
mode as follow:  
VCD/CD:  
Normal Playback  
2X  
3X  
4X  
REP-ONE  
REP-ALL  
REPEAT OFF  
MP3:  
Normal Playback  
2X  
4X  
1. Continuously repeat at the current  
chapter/track, when selected REP-  
ONE mode.  
2. Select REP-ALL mode to continuously  
repeat all chapter/track on the current  
disc.  
3. When the player finish playback the  
current disc last chapter/track, it will  
stop display the elapsed time. When  
selected REPEAT OFF mode, REP-  
ONE & REP-ALL disappear at the  
screen display.  
Skipping Track  
Press  
/
playback to skip to next track or back  
one track.  
Note: For some VCD2.0 discs (PBC-  
/
on the remote handset or  
on the front panel during  
playback control),  
may be unavailable.  
and  
buttons  
Slow Motion Play  
4. REPEAT feature does not support  
VCD2.0 (with PBC ON).  
Press slow button during playback.  
Eachtime the button is pressed, the  
slow modes are changed according  
to the disc as follow.  
Remote Sensor (IR)  
Point the remote handset to the  
remote sensor. Receive the signal  
from remote handset.  
DVD:  
Normal Playback  
SF 2x  
SR 8x  
SF 4X  
SR 4X  
SF 8X  
SR 2X  
VCD:  
Normal Playback  
SF 1x  
SF 2X  
SF 3X  
Step BWD  
Note: For VCD, in any slow mode,  
press ENTER button to return to  
normal playback.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
(3) Press DISPLAY for the third time:  
On-Screen Display Function  
Press the DISPLAY button during  
playback to display the contents of the  
current disc on the screen.  
T:01/18 P: 00:00:25 LR DISC  
TOTAL ELAPSED  
Example:  
(4) Press DISPLAY for the fourth time:  
DVD:  
(1) Press DISPLAY for the first time:  
T:01/18 P: 00:00:25 LR DISC  
TOTAL REMAIN  
TITLE 01/03 CHAPTER 002/025  
P:00:00:25 TITLE ELAPSED  
(5) Press DISPLAY for the fifth time:  
The message on the screen will be cleared.  
for SVCD and VCD.  
Note: For CD and Mp3, the message will  
always display on the screen.  
Title Number, Total Title Number, Chapter  
Number, Total Chapter Number of this Title  
of the disc currently being played will be  
shown on the screen, along with the  
elapsed time.  
MP3:  
Each time DISPLAY is pressed, the  
message displayed on screen changesas  
follows:  
(2) Press DISPLAY for the second time:  
TITLE 01/03 CHAPTER 002/025  
P: 00:00:25 TITLE REMAIN  
SINGLE ELAPSED  
SIGGLE REMAIN  
(3) Press DISPLAY for the third time:  
Multi-audio Language Function  
DVD:  
TITLE 01/03 CHAPTER 002/025  
P:00:00:25 CHAPTER ELAPSED  
Press AUDIO during playback.  
Each time the button is pressed, number  
of the audio soundtrack language changes  
on sequential order.  
(4) Press DISPLAY for the fourth time:  
TITLE 01/03 CHAPTER 002/025  
P: 00:00:25 CHAPTER REMAIN  
Notes:  
-The language number is different  
according to the disc.  
-Some disc only contain one language  
soundtrack.  
(5) Press DISPLAY for the fifth time:  
The message on the screen will be cleared.  
-When no different language  
soundtrack are recorded,  
displayed at screen left top corner.  
Video CD/SVCD/CD:  
(1) Press DISPLAY for the first time:  
will be  
T:01/18 P: 00:00:25 LR DISC  
SINGLE ELAPSED  
VCD:  
Press AUDIO during playback. It is  
possible to switch the sound between  
monaural and stereo sound.  
(2) Press DISPLAY for the second time:  
LEFT VOCAL  
RIGHT VOCAL  
MONO LEFT  
T:01/18 P: 00:00:25 LR DISC  
SINGLE REMAIN  
STEREO MONO RIGHT  
CD:  
Press AUDIO during playback. It is  
possible to switch the sound between  
monaural and stereo sound.  
MONO LEFT  
MONO RIGHT STEREO  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
TITLE Menu Function  
DVD :  
MP3 Disc Play  
MP3 disc is playing as the format of  
FOLDER by FOLDER.  
For example:  
If the DVD has multiple titles recorded on  
the disc. It can select preferred title from  
the title menu to start playback.  
1.Press TITLE during playback. The title  
menu is display.  
MP3 PLAYER  
2.Press the cursor button shown in TV  
screen, select preferred title by the  
cursor button and confirmed by  
ENTER key.  
ROOT  
ROOT  
MP3 MUSIC  
SKY  
0
1
VCD :  
MP3 HEAR YOUR  
Press MENU button while the disc is  
playing, you can switch between"PBC  
on" and "PBC off"mode.  
Multi- subtitle Language Function  
(For DVD only)  
Use  
/
/
/
to select the item or  
folder, then press ENTER button.  
Press SUBTITLE during playback. Each  
time the button is pressed, number of the  
subtitle language changes in sequential  
order.  
Pressing REPEAT button repeatedly can  
select three kinds of repeat play mode.  
REP-ONE:  
Play the same song over and over again.  
Notes:  
-The language number is different  
according to the disc.  
-Some discs only contain one subtitle  
language.  
FOLDER REPEAT:  
Play all songs in the current directory in  
sequence, over and over again.  
DISC REPEAT:  
Play all songs in the disc over and over  
again.  
In the playback, use  
item ahead or back.  
: Rapid reverse,  
Note: The FOLDER cannot be selected  
during playing. It can be selected after  
(Stop) button pressed.  
-When no different subtitle language are  
recorded,  
will be displayed at screen  
left top corner.  
or  
to skip an  
Multi- angle Function  
(For DVD only)  
Press ANGLE during playback. Each  
time the button is pressed, number of the  
angle changes in sequential order.  
Notes:  
: Rapid advance  
-The angle number is different according  
to the disc.  
-The function only work for discs having  
scenes recorded at different angles.  
-When no different angle are recorded,  
will be displayed at screen left top corner.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
INITIAL SETUP  
GENERAL SETUP  
SETUP MENU --- MAIN PAGE  
--- GENERAL PAGE ---  
GENERAL SETUP  
SPEAKER SETUP  
AUDIO SETUP  
TV DISPLAY  
PIC MODE  
NORMAL/PS  
NORMAL/LB  
WIDE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
PREFERENCES  
EXIT SETUP  
1. Press SETUP in the stop mode.  
(Press the stop button twice to ensure  
the player under STOP mode.)  
MAIN PAGE  
TV Screen  
2. The initial SETUP menu is displayed.  
3. Select the preferred item by using the  
4:3  
Wide (16:9)  
Video Material  
Normal  
Pan Scan  
Letter-box  
4:3  
/
buttons.  
16:9  
4. Press ENTER buttons.  
a. GENERAL SETUP  
This setup page includes all the  
item of TV display & audio output  
feature. The detail please refer to  
GENERAL SETUP MENU.  
TV display setup  
This is to select the appropriate TV  
aspect (4:3 or 16:9) according to the  
connected TV set.  
b. SPEAKER SETUP  
Normal/PS (For 4:3 TV)  
This is to activate the audio output  
from DOLBY AC3 5.1 DOWNMIX  
to 2 channel mode. Please refer to  
SPEAKER SETUP MENU.  
Played back in the PAN & SCAN style.  
(If connected to wide-screen TV, the left  
and right edges are cut off.)  
Normal/LB (For 4:3 TV)  
c. AUDIO SETUP  
Played back in letterbox style.  
(If connected to wide-screen TV, black  
bands appear at top and bottom of the  
screen.)  
This setup page includes all the  
items for AUDIO. Please refer to  
AUDIO SETUP MENU.  
d. PREFERENCE SETUP  
Wide (For 16:9 TV)  
Select when a wide-screen TV set is  
connected.  
This setup page includes all the  
configuration of support feature.  
The detail please refer to  
PREFERENCES SETUP MENU.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
--- GENERAL PAGE ---  
--- GENERAL PAGE ---  
TV DISPLAY  
TV DISPLAY  
PIC MODE  
AUTO  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
HI-RES  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
N-FLICKER  
ENGLISH  
MAIN PAGE  
MAIN PAGE  
PIC mode setup  
OSD LANG type setup  
Select AUTO, the player PIC mode will  
depend on DVD disc.  
Select the preferred OSD language by  
using the  
/
buttons.  
Select HI-RES format for best image  
resolution.  
Select N-FLICKER format on format on  
image or picture under noise affect.  
--- GENERAL PAGE ---  
--- GENERAL PAGE ---  
TV DISPLAY  
TV DISPLAY  
PIC MODE  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
ON  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
OFF  
ON  
SCR SAVER  
OFF  
MAIN PAGE  
MAIN PAGE  
ANGLE MARK display setup  
CAPTIONS setup  
If it is set to ON, when the multi-angle  
Activate the CAPTIONS feature by  
selecting ON. And release this feature  
by selecting OFF.  
DVD disc is playing,  
(the angle mark)  
will appears on the screen; if is set to  
OFF, the mark will not appear.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
--- GENERAL PAGE ---  
AUDIO SETUP  
--- AUDIO SETUP ---  
TV DISPLAY  
PIC MODE  
AUDIO OUT  
OP MODE  
ANALOG  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
SPDIF/RAW  
SPDIF/PCM  
LPCM OUTPUT  
DYNAMIC  
ON  
OFF  
MAIN PAGE  
SCR SAVER setup  
Select the SCR SAVER output ON/OFF.  
MAIN PAGE  
AUDIO OUT  
SPEAKER SETUP  
This is to activate the audio output from  
ANALOG mode to SPDIF/RAW mode to  
SPDIF/PCM mode.  
--- SPEAKER SETUP PAGE ---  
--- AUDIO SETUP ---  
DOWNMIX  
LT/RT  
STEREO  
AUDIO OUT  
MAIN PAGE  
OP MODE  
LINE MODE  
RF REMOD  
LPCM OUTPUT  
DYNAMIC  
This is to activate the audio output from  
DOLBY AC3 5.1 DOWNMIX to 2 channel  
mode. Select the preferred SPEAKER  
connection by using the cursor buttons.  
- Select the LT/RT to activate the Dolby  
surround compatible output.  
MAIN PAGE  
OP MODE  
There are two operating modes for the  
Dolby Digital decoder: LINE OUT and  
RF REMOD.  
- Select the STEREO to activate simple  
stereo mode.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
--- AUDIO SETUP ---  
PREFERENCES SETUP  
--- PREFERENCES PAGE ---  
AUDIO OUT  
TV TYPE  
AUTO  
NTSC  
PAL  
OP MODE  
AUDIO  
LPCM OUTPUT  
DYNAMIC  
LPCM 48K  
LPCM 96K  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
MAIN PAGE  
TV type setup  
LPCM OUTPUT  
Select the LPCM OUTPUT between  
LPCM 48K and LPCM 96K.  
This player can play discs recorded in  
either PAL or NTSC format.  
Select NTSC format, when you  
connected to NTSC TV.  
Select PAL format, when you connected  
to PAL TV.  
--- AUDIO SETUP ---  
Select AUTO format, the player TV output  
format will according to the DVD disc  
format.  
AUDIO OUT  
--- PREFERENCES PAGE ---  
TV TYPE  
FULL  
6/8  
OP MODE  
LPCM OUTPUT  
DYNAMIC  
AUDIO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
2/8  
OFF  
MAIN PAGE  
Dynamic Range Control  
Select DRC and adjust the dynamic  
range of a Dobly Digital encoded  
program. There are 8 steps between full  
compression and off compression.  
AUDIO language setup  
Select the preferred AUDIO soundtrack  
by using the cursor buttons.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
TV TYPE  
1 G  
AUDIO  
AUDIO  
2
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
3 PG  
4 PG 13  
5
6 PG-R  
7 NC-17  
8 ADULT  
NO_PARENTAL  
SUBTITLE language setup  
Select the preferred SUBTITLE language  
by using the cursor buttons.  
PARENTAL  
Select suitable parental guidance by the  
cursor buttons and conformed by  
pressing ENTER button.  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
AUDIO  
TV TYPE  
AUDIO  
SUBTITLE  
SUBTITLE  
DISC MENU  
PARENTAL  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
CHANGE  
DISC MENU language setup  
Select the preferred DISC MENU  
language by using the cursor buttons.  
PASSWORD  
Select the change and press ENTER  
button. Type the old password (The initial  
factory code is 3308) and key in 4  
characters password now you want to  
use, and retype again to confirm key in  
correctly.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
--- PREFERENCES PAGE ---  
DEFAULTS TABLE  
General Setup TV Display  
PIC Mode  
Normal/PS  
AUTO  
TV TYPE  
AUDIO  
Angle Mark ON  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
OSD Language English  
Captions  
OFF  
SCR Saver OFF  
Speaker Setup Downmix  
Stereo  
Audio Setup Audio Out  
OP Mode  
Analog  
Line Out  
RESET  
Dynamic  
LPCM Out  
LPCM 96K  
AUTO  
Preferences TV Type  
Audio  
DEFAULTS  
Select reset to become factory initial  
setting.  
English  
English  
Subtitle  
DISC Menu English  
Parental  
NO PARENTAL  
--- PREFERENCES PAGE ---  
Password  
3308  
Smart NAV With Menu  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
MAIN PAGE  
NO MENU  
WITH MENU  
MP3 PLAY  
In this item, you can select NO MENU  
mode or WITH MENU mode.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Supply voltage  
Current consumption  
Signal system  
:
:
:
:
12V DC (11V-15V), test voltage 14.4V, negative ground  
Less than 7A  
Compositive video 1.0Vp-p 75  
Discs played  
(1) DVD-VIDEO disc  
5(12 cm) single-sided, single-layer  
5(12 cm) single-sided, double-layer  
(2) Compact disc (CD-DA,VIEDO CD)  
5(12 cm) disc  
Audio Output Level  
Audio Signal Output  
Characteristics  
:
:
600(2 ch 2.0 Vrms)  
(1) Frequency Response  
(2) S/N Ratio  
20 Hz-20 kHz  
90 dB (JIS)  
(3) Wow and Flutter  
Below measurable limits  
For 3 Bands  
(Europe)  
FM  
For 2 Bands  
For 2 Bands  
(U.S.A.)  
FM  
(Europe)  
FM  
Frequency Coverage  
IF  
: 87.5 to 108 MHz 87.5 to 108 MHz 87.5 to 108 MHz  
: 10.7 MHz  
Sensitivity (S/N = 30 dB) : 20 dBu  
10.7 MHz  
20 dBu  
> 30 dB  
MW  
10.7 MHz  
20 dBu  
> 30 dB  
AM  
Stereo Separation  
: > 30 dB  
MW  
Frequency Coverage  
IF  
: 522 to 1620 KHz 522 to 1620 KHz 530 to 1710 KHz  
: 450 KHz  
450 KHz  
40 dBu  
450 KHz  
40 dBu  
Sensitivity (S/N = 20 dB) : 40 dBu  
LW  
Frequency Coverage  
IF  
: 144 to 290 KHz  
: 450 KHz  
Sensitivity (S/N = 20 dB) : 45 dBu  
Note:  
Specifications and design are subject to modification, without notice, due to improvements  
in technology.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
Before going through the check list, check wiring connection. If any of the problems  
persist after check list has been made, consult your nearest service dealer.  
Symptom  
No power.  
Cause  
Solution  
The car ignition switch is  
not on.  
If the power supply is properly  
connected to the car accessory  
terminal, switch the ignition key  
to ACC.  
The fuse is blown.  
Replace the fuse.  
Disc cannot be Presence of disc inside the  
Remove the disc in the player,  
Then put a new one  
oaded or  
ejected.  
player  
Inserting the disc in reverse  
direction.  
Insert the compact disc with  
the label facing upward.  
The disc is extremely dirty or  
defective  
Clean the disc or try to play a  
new one.  
Temperature inside the car  
is too high.  
Cool off or until the ambient  
temperature return to normal.  
Condensation.  
Leave the player off for an hour  
then try again.  
No sound.  
Volume is in minimum.  
Wiring is not properly  
Adjust volume to a desired level.  
Check wiring connection.  
connected.  
Sound skips.  
The installation angle is  
more than 30 degrees.  
Adjust the installation angle less  
than 30 degrees.  
The disc is extremely dirty  
or defective disc.  
Clean the compact disc, then  
try to play a new one.  
The operation  
keys do not  
work.  
The built-in microcomputer  
is not operating properly  
due to noise.  
Press the RESET button.  
Front panel is not properly  
fixed into its place.  
The radio does The antenna cable is not  
Insert the antenna cable firmly.  
notwork.  
connected.  
The signals are too weak.  
Select a station manually.  
This product incorporates copyright protection technology that is protected by method  
claims of certain U.S. patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners.Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
88-V2490-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Baby Carrier SCD148 60 User Manual
Philips Battery Charger SCB7080NB User Manual
Philips Cassette Player AQ 6681 14 User Manual
Philips Network Cables SWV3434S User Manual
Philips VCR VR 788 User Manual
Pioneer Stereo System X Z9 User Manual
Planar Car Video System PXL2760MW User Manual
Planar Personal Computer C3012T User Manual
Planet Technology Network Router WAP 4000A User Manual
Planet Technology Security Camera CAM IVP52 User Manual