OWNER’S MANUAL
DIGITAL AUDIO OUT
MULTI-SUBTITLE LANGUAGES FUNCTION
ELECTRONIC SHOCKPROOF (ESP) FUNCTION
A/V INPUT
FM MODULATOR
REMOTE CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
CAUTION:
DISC NOTES
Discs Note:
This mobile DVD player is a class 1 laser
product. However this mobile DVD player
uses a visible/invisible laser beam which
could cause hazardous radiation
exposure if directed. Be sure to operate
the mobile DVD player correctly as
instructed.
You can playback the following discs-
12CM on the receiver:
DVD VIDEO/DVD AUDIO
VIDEO CD/AUDIO CD
MP3/WMA/JPEG/MPEG4
Handling and Cleaning
Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Do not open covers and do not repair
yourself. Refer servicing to qualified
personnel.
- Dirt, dust, scratches and warping discs
will prevent proper operation.
- Do not place stickers or make scratches
on discs.
- Do not warp discs.
- A disc should always be kept in its case
when not in use to prevent from damage.
- Do not place discs in the following
places:
WARNING:
- To reduce the risk of fire or electric
shock, do not expose this equipment to
rain or moisture.
- To reduce the risk of fire or electric
shock, and annoying interference, use
only the recommended accessories.
- This device is intended for continuous
operation.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents
and other intellectual property rights
owned by Macro vision Corporation and
other rights owners. Use of this copyright
protection technology must be
authorized by Macro vision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macro vision
Corporation. Reverse engineering or
disassembly is prohibited.
1.Direct sunlight.
2.Dirty, dusty and damp areas.
3.Near car heaters.
4.On the seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistened with isopropyl
(rubbing) alcohol. Never use solvents
such as benzene, thinner or conventional
record cleaners as they may mar the
surface of the disc.
Region Management Information
This mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
User’s Manual - page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Label side
up
Installation
Notes:
- Choose the mounting location where the unit
will not distract the driver.
Do not touch
the underside
of the disc
- Before the installing of the unit, connect the
wiring temporarily and make sure it is all
connected up properly and the unit and the
system works.
Do not
bend
- Use only the parts included with the unit to
ensure proper installation. The use of
unauthorized parts can cause malfunctions.
- Consult with your nearest dealer if
installation requires the drilling of holes or
other modifications of the vehicle.
- Install the unit where it does not get in the
driver's way and cannot injure the passenger if
there is a sudden stop, like an emergency
stop.
Wipe the disc from
center toward the
outside edge
Preparing New Discs with Rough Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a
ballpoint pen or pencil as shown on the
right. To remove the rough edges, press
the side of the pen or pencil against the
inside and outside edges of the disc.
- If installation angel exceeds 30°from
horizontal, the unit may not perform properly.
Rough spots
on
outside edge
- Avoid installing the unit where it will be
subject to high temperature, such as from
direct sunlight, or from hot air, from the
heater, or where it would be subject to
dust, dirt or excessive vibration.
Ball point pen
or pencil
Rough spots
edge
on inside
User’s Manual - page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
The unit is designed for home-use and car-use. When installed on the car, please
follow the installation instruction below.
Notes:
1. First remove the two screws that lock the DVD mechanism, then attach the
brackets on both sides of unit with screws (m4X5), last install the unit with
screws (m5X25).
2. When fix the unit, you can slide the screw (m5X25) to left side or right side to
meet your needed position. In the figure above, select two holes among
position that marked 1, 2, 3 and 4 to fix the bracket.
User’s Manual - page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRIC CONNECTION
METHOD A
Use the conversion cable to obtain DC 12V power supply input through the AC/DC
ADAPTER or the cigarette lighter according to the illustrator as follows:
METHOD B
According to the illustrator below, install the unit in the car and obtain DC 12V power
supply input.
MEMORY/BATTERY (B+) (YELLOW)
GROUND (B-) (BLACK)
IGNITION SWITCH (ACC+) (RED)
IR Sensor
If you need to mount the DVD player in a location which is inaccessible, or where the line-of-
sight between the remote control and the face of the player is interrupted, connect the remote
sensor as shown in the diagram above.
Mount the IR Sensor in a convenient location which is in direct line-of-sight with the use
location of the remote control. Point the remote control at the sensor to operate the player.
User’s Manual - page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
LOCATION AND FUNCTION OF KEYS
Front panel
Remote Control
User’s Manual - page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
Press it to turn the unit on/off.
2.
POWER
19. SETUP
Press the button to enter into the system
setting menu.
Pause playback a disc, press it again to
resume playback.
20. TITLE/PBC
In DVD or VCD (PBC mode is on) mode,
press TITLE/PBC button to display the TITLE
menu that is stored in disc.
21. 0~9
3.MODE
Change between DVD, TV and AV mode.
4.
Numeric buttons.
Press the button to skip back one track.
5.
22. AUDIO
On multi-audio sound track disc, press to
change the AUDIO sound track.
23. SUB-T
Press the button to skip to the next track.
6. EJECT
Press it to eject the disc from the disc slot (7).
7. DISC Slot
Change the subtitle language on multi-subtitle
language DVD disc.
Gently insert a disc with the printed side
uppermost into the disc slot (7) until you feel
some resistance.
24. MUTE
Press it to mute the sound, press it again will
resume the sound.
8. AV IN terminals
25. ANGLE
Connect peripheral audio/video system to
the unit through the AV IN terminals.
9. USB port
Change the view angle on multi-angle DVD
disc.
26. VOL+/VOL-
You can connect an USB driver through this
port.
Press the VOL+ to increase the volume level.
Press the VOL- to decrease the volume level.
27. MENU
10. SD/MMC card slot
You can insert SD/MMC card into the slot.
11. IR
In DVD or VCD (PBC mode is on) mode, press
the button to display the TITLE menu that is
stored in disc.
Point the remote control handset to the
Remote Control Sensor IR (11). Press the
function keys on the handset to control the
system.
28.
Press the button to search forward rapidly.
29.
12. RESET
Press the button to search reverse rapidly.
30. GOTO
Press RESET button (12) to restores the
default setting.
Press the button to select th bookmark that
you set.
13. DISP
Display statistical disc information during
playback.
31.
STOP
Press it for the first time to pre-stop playback,
press it again to stop playback.
32. PROG
14. A-B
A-B repeat allows a passage to be repeated
continuously.
Press the button to play the track orderly by
what you programmed.
15. RPT
Switch the repeat mode of discs.
16. ZOOM
33. RDM
Press the button to play all tracks o n disc
randomly. Press again to cancel the function.
Press the button to change the scaling.
17.
In some menus,
,
buttons served as
cursor buttons to move to up/down, left/right.
18. ENTER
Confirm the Track/Chapter selected with
the numeric buttons or selected with the
cursor buttons on TV screen.
User’s Manual - page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL
Preparing and Using The Remote
Control
2. Replacing the battery
Replace the battery with the same type
and the (+) side facing up.
* Before using the remote control,
please take the transparent insulator
strip off the bottom of remote control.
* Point the remote control at the remote
sensor (11) from no more than 6 feet
away.
* If the IR sensor is exposed to direct
sunlight, the remote control may not be
able to communicate with it properly.
You may need to relocate or shield the
IR sensor.
* If you are more than 300 away from
being directly in front of the IR sensor,
the remote control may be unable to
communicate properly.
* The remote control is small,
lightweight precision device. To avoid
damage, short battery life, operational
erros and poor response, observe the
following:
3. Closing the cover
Gently push in the holder until securely
locked into place.
-Do not subject the remote control to
excessive shock.
-Do not put in a pocket.
-Keep away from food, moisture and
dirt.
-Do not place in direct sunshine.
Battery replacement
The remote control uses a lithium button
type battery, model CR 2025 3V. Do not
use any other kind of battery in the
remote. Follow these instructions when
installing or replace the battery.
1. Remove the battery holder by
pressing the locking tab with your thumb
B
A
User’s Manual - page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL OPERATION
Last Position Memory Feature
- During disc playback, if you press
button (1) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
-During disc playback, if you press the
MODE button (3) to switch to other mode,
and then return to DVD mode again, the
unit will resume playing from the point
that it was interrupted.
Initial System Start-Up
Be sure to press the RESET button ( 12)
When using the unit for the first time,
after all connections are completed
correctly.
1. Turn off the unit power.
2. Press RESET with a ballpoint pen or
similar pointed object.
Turning Power On and Off
Press
turn on the unit.
When system is on, press button (1) to
turn off the unit.
button (1) or insert a disc to
Reset Function
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button (12)
is to be activated at the following times:
-After initial installation of the unit when
all wiring is completed.
-Some of the function buttons do not
operate.
- Error symbol appears on the display.
Note:
Loading/Removing a Disc
1. Insert the disc into the disc slot (7)
with the printed side facing up. The
player will play the disc automatically.
2. Whenever press button (6) to eject
the disc.
If the unit still does not function after you
have pressed RESET, try cleaning the
connectors which link the panel and the
main housing with a cotton swab
moistened with isopropyl (rubbing
alcohol). If it still does not work, bring the
unit to your dealer for servicing or advice.
Adjusting the volume level
Press VOL+/VOL- button (26) to adjust
the volume level.
Input Source Select
Press MODE button (3) to switch to the
desired input source.
The mode will change each time the
button is pressed.
.
DVD AV
ESP Function
This unit features ESP (anti-shock)
protection. It works by “playing ahead”
and buffering the stored part of the
program, playing it back when the
realtime portion of the program has been
disrupted. Depending on the
listening/viewing mode you are in, the
amount of time of disruption which can be
hidden is as follows:
CD, VCD: 18 seconds
MP3:160 seconds
DVD: 6 seconds
MPEG4: 20 seconds
User’s Manual - page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause Playback
Press button (2) to pause playback.
Press it again to resume playback.
CD/MP3 Operation
Playback
1. Insert a disc with the label side facing
up. The disc will be drawn into the player
automatically. The information for the
current disc will be shown on the screen .
2. For CD:
Stopping playback
- Briefly press the < button (31) to stop
the playback. When the < button is
pressed and then press button (20),
normal playback will resume.
- Press < button (31) twice and then
press button to stop the playback and
go back to first track.
Fast-Forward / Fast-Reverse
1. Fast-Forward
Press 8 button (28) during playback.
Each time the button is pressed, the
speed of fast-forward increases as
follows:
3. For MP3:
FORWARD 2XÆ 4XÆ 8XÆ 20X
In fast-forward state, press button (2)
to return to normal playback.
2. Fast-Reverse
Press 7 button (29) during playback.
Each time the button is pressed, the
speed of fast-reverse increases as
follows:
BACKWARD 2XÆ 4XÆ 8XÆ 20X
In fast-reverse state, press button (2)
to return to normal playback.
1). Press ◄/► button to move between
work area A, B and C.
Repeat Play/ Paragraph Repeat Play
- Repeat play:
Use this function when you wish to repeat
a whole disc, a track or a directory in the
disc.
1) Press RPT button (15) repeatedly to
select different repeat modes.
2) For different types of discs, pressing
RPT button (15) has different effects.
For CD:
2). Press ▲/▼ button or input relative
numeric button to select the desired
folder or file of this work area.
3). Press ENTER button (18) to confirm
the selected item.
4. Return to the beginning of the previous
track (file) by pressing the 9 button (4).
5. Advance to the beginning of the next
track (file) by pressing the : button (5).
REP 1 REP ALL REP OFF
For MP3:
REP 1 REP DIR
OFF
REP ALL REP
User’s Manual - page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
REP 1: Only a track (file) is played
repeatedly.
REP DIR: Only tracks (files) in a folder
are repeatedly playing.
REP ALL: An entire disc is played
repeatedly.
DVD/VCD Operation
Playback with PBC Menu
Some VCD or SVCD discs contain a
simplified menu to assist in selection of
tracks. To view this menu requires a
system called Playback Control (PBC).
PBC creates this disc directory “on-the-
fly” if PBC has been enabled. To turn PBC
On, press the PBC button (20). (Please
note that PBC does not accommodate the
following features: REPEAT, RANDOM,
A-B, PROGRAM and GO TO).
REP OFF: The mode returns to normal
playback.
- Paragraph Repeat Play:
A-B repeat allows a selected passage to
be repeat continuously.
Press A-B button (14) at the start of the
desired passage.
Playback With Menu
If the DVD disc or VCD/SVCD discs has a
menu system, and the PBC (playback
Control) setting is on, you can display the
menu which allow you to select the
program to playback by pressing PBC
button (20).
Press A-B button (14) at the end of the
passage.
Then the unit will repeat playing the
passage you just set from A to B.
To return to normal playback, press A-B
Button again.
1. Move the cursor buttons (
highlight the item you wish to select.
,
) to
2. Press ENTER (18) to select this item.
Some discs offer a series of menus which
with a wide variety of choices. You can
continue to navigate the menu further
using a combination of the cursor buttons
Playing In Random Sequence
Press RDM button (33) to switch the
random mode on/off. In this mode, tracks
(files) on the disc will be played in a
random sequence.
(
,
) and the ENTER button (18).
Pausing playback
To pause playback, press
(2). Press
again to resume playback. Please note
that when playback is resumed, there
may be a short delay in either the image
or sound. This is normal.
Stopping playback
Briefly press the button (31) to stop the
Unit playback. When the
pressed and then press
button is
button (2),
resume to the normal playback.
Press button (31) twice and then press
(20) to stop playback and go back to
the first track/chapter.
User’s Manual - page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast-Forward / Fast-Reverse
1. Fast-forward
Press8button (28) during playback.
Each time the button is pressed, the
speed of fast-forward increases as
follows:
2) For different types of discs, pressing
RPT button (15) has different effects.
For DVD:
REP CHAPTER REP TITLE REP
OFF
For VCD/SVCD:
FORWARD 2XÆ 4XÆ 8XÆ 20X
REP 1 REP ALL REP OFF
In fast-forward mode, press
to return to normal playback.
2. Fast-Reverse
button (2)
NOTES:
REP 1: Only a track (file) is played
repeatedly.
Press 7 button (29) during playback.
Each time the button is pressed, the
speed of fast-reverse increases as
follows:
REP CHAPTER: A chapter is played
repeatedly.
REP TITLE: A title is played repeatedly.
REP ALL: an entire disc is played
repeatedly.
REP OFF: The mode returns to normal
playback.
BACKWARD 2XÆ 4XÆ 8XÆ 20X
* Repeat feature does not support VCD
2.0 (PBC is on).
In fast-reverse mode, press
to return to normal playback.
button (2)
-Paragraph Repeat Play:
Use this function when you wish to repeat
play a desired paragraph. A-B repeat
allows a passage to be repeated
continuously.
Finding the Beginning of Chapters or
Tracks (Files)
Use this function to easily move to the
beginning of the chapters or tracks (files)
on the disc.
Press A-B button (14) at the start of the
desired passage.
During playback, each time press the :
button (5) or 9 button (4) to skip and
playback the chapter/track.
: :Press the button to start playback
From the beginning of the following
chapter or track (file).
9 :Press the button to start playback
from the beginning of the previous
chapter or track (file).
Press A-B button (14) at the end of the
passage.
Then the unit will repeat playing the
passage you just set from A to B.
To return to normal playback, press A-B
button again.
Note:
1. Some DVDs do not have chapters.
2. For some VCD2.0 discs (PBC control),
:/9 or 8/7 buttons may be
unavailable.
Searching Directly by Chapter or Track
Number
Use this function to easily move to the
beginning of the chapters or tracks (files)
on the disc.
Please note: This operation can only be
controlled from remote control unit.
1. During playback, pre-stop or pause,
input the chapter or track number you
want to using the numeric keypad( “0” to
“9”).
Repeat Play/ Paragraph Repeat Play
- Repeat play:
Use this function when you wish to repeat
an entire disc, a track or a chapter in the
disc.
1) Press RPT button (15) repeatedly to
select different repeat modes.
User’s Manual - page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Waiting for a moment for the player
locate the track.
Playback starts from the selected
chapter or track.
7)C:
Displays the total playback time for the
current chapter.
8)
* This function is only available for discs
on which chapter numbers are recorded.
Displays the current disc language, audio
type, subtitle language and play angle.
For VCD:
Playing In Random Order
Press RDM button (33) to switch the
random mode on/off. If the random mode
is on, tracks (files) on the disc will be
played in a random order.
On Screen Display Function
Press the DISP button (13) on the remote
control during playback to display on-
screen information about the current
disc.
GOTO Function
The GO TO function allows you to select
a specific place in the program where you
want to begin playback. The function is
displayed slightly differently between
DVD and VCD modes.
For DVD:
Pressing and holding DISP button (13) on
the remote control to display information
in the following manner.
Press GOTO button (30), the screen will
display the following message:
FOR DVD:
Use the number keys (21) to input the
Track and Time then press ENTER button
(18) to confirm.
ZOOM Function
1) TT
Displays the current title number and
total title number.
2) CH
Press ZOOM button (24) to increase or
decrease the size of the image. Please
note that the ZOOM function is only
available on discs which support it.
Displays the current chapter number and
total chapter numbers.
3)
Displays the playing time for the entire
disc.
4)C-:
In zoom mode, press
,
buttons
(16) to move pictures up/down/left/right
direction in order to find the area of the
picture that you want to zoom into.
Displays the remaining playback time for
the current chapter.
5)T:
Displays the total playback time for the
current title.
6)T-:
Displays the remaining playback time for
the current title.
User’s Manual - page 13
Multi-subtitle Language Function
Some DVDs have multiple subtitle
languages. The subtitle language can be
changed or subtitles hidden during
playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the SUB-T button (23) during
playback. The following information will
be shown on the screen.
- Some discs only contain one
soundtrack language.
- Not all discs will allow changing the
subtitle during playback. In these cases,
select subtitle from the DVD’s menu.
Each time you press the button, the
subtitle cycles between the different
languages recorded on the disc.
Notes:
- Not all discs will allow changing the
subtitle during playback. In these cases,
select subtitle from the DVD’s menu.
- There may be a delay before the
selected subtitle appears.
- For some discs, the subtitles will be
displayed even when this is set to off.
- The number of available languages
have one subtitle language available.
Multi-angle Function
For DVD discs in which scenes have
been filmed from multiple angles, the
viewing angle can be switched during
playback.
Press ANGLE (25) during playback. The
following information will be shown on
the screen.
ANGLE 1
The angle setting cycles between the
available viewing angles recorded on the
disc each time the button is pressed.
Notes:
- The ANGLE function is only available
for discs which support it and programs in
have been recorded.
Switching the Audio Tracks
For some VCD/SVCD discs which have
multiple audio tracks, you can change the
audio track temporarily during playback.
Each time you press the AUDIO button
(22) during playback, the sound cycles
between the audio tracks recorded on the
disc.
- Depending on the disc, the angle may
switch in one of two ways.
1. Seamless: The angle switches
smoothly.
CHANNEL
CHANNEL
CHANNEL
[ STEREO]
[MONO L]
[MONO R]
2. Non-seamless: When the angle is
switched, a still picture is displayed first,
after which the angle switches.
- The angle number varies from disc to
disc.
Notes:
- Some discs only contain one
soundtrack language.
Program Play Function
Multi-audio Language Function
For DVD discs which have multiple
language soundtrack, you can change
the language track temporarily during
playback.
- In VCD/CD playback mode, press
PROG button (32) to activate program
edit interface as follow:
Each time you press the AUDIO button
(22) during playback, the sound cycles
between the audio tracks recorded on the
disc.
:
:
Notes:
- The language number is different
according to the disc.
User’s Manual - page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
,
cursor button to select the
The current disc has a “Parental Control”
level, and the player’s parental level is
set below the level of the disc. To view
this disc, you should enter the correct
password to play the disc normally.
NOTE:
For how to set the “Parental Control”
level, please refer to “Parental Control”
on page 18.
item that you want to program.
1) The item you selected will become
highlighted.
2) Input the track number that you want to
program by numeric buttons (0~9) on the
remote control.
3) Press
,
cursor buttons to
move to “PLAY” operation button and
then press ENTER button (18) to
program the playback.
Data Disc Play Operation
- In DVD/MP3 playback mode, press
PROG button (32) to activate program
edit interface as follow:
When you insert a data disc including
audio (MP3), movie (MPEG) or picture
(JPG) files into the disc slot, the following
media play window will be shown on the
screen:
Use
,
cursor button to select the
item that you want to program.
1) The item you selected will become
highlighted.
2) Input the track number that you want to
program by numeric buttons (0~9) on the
remote control.
Work area A: folder list
Work area B: files list
Work area C:
3) Press
,
cursor buttons to
move to “PLAY” operation button and
then press ENTER button (18) to
program the playback.
(1): playback audio mode (default)
(2): viewing picture mode
(3): playback movie mode
Work area D: file information display
Frequently Asked Questions
- I inserted a DVD disc, but it cannot be
played. The message “REGION
ERROR” is displayed.
1. Press
button to move between
work area A, work area B and work area
C.
DVD players and discs all have “REGION
CODES”. If the region code number on
the DVD disc does not correspond to the
region number of this DVD player, the
unit cannot play the disc.
- When I insert a DVD disc, there is a
window shown on the screen that
requires entering 4 characters
2. Press
button to select the desired
folder or file of this work area.
3. Press ENTER button (18) to confirm
the selected item.
4. In picture views or movie playback
mode, if you want to return to the
previous menu, press (STOP) button.
password. why?
User’s Manual - page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Card Play Operation
- The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
This disc player offers you a memory card
slot (10).
- USB MP3 player is not a standard
which means different brand name or
different models have their own standard.
So our product cannot support every MP3
player.
Using the SD/MMC card:
When you insert a SD/MMC card into the
Memory card slot (10), the DVD player
will read the SD/MMC card automatically.
The unit gives first priority to the card in
the slot. If you insert a disc into the disc
slot (7) while reading the SD/MMC card,
the unit will play the disc. Press (31)
button to enter into PRE-STOP mode,
then press GOTO button (30) to switch
back to the reading card mode.
- When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB port.
Otherwise, it may cause battery burst.
Note:
- When in USB play mode, be sure not to
remove the USB device from the USB
port.
While reading the memory card, please
don’t touch or take out the card. If the is
unable to read the card, please check if
the card is in good condition. You may
also wish to try removing the card fully
from the reader, and reinserting it again.
AV IN Operation
This disc player offers you the option of
using the auxiliary front panel A/V input
jack to connect a video game, digital
camera/camcorder or other units you
wish to use in your mobile video system.
USB Device Operation
This disc player offers you an USB
interface (9). An USB device can be
connected to this port.
Using the USB device:
When you insert a USB device into the
USB interface (9), the DVD player will
read the USB automatically.
The unit will give priority to the latter. If
insert a disc into the disc slot (7) or inset
a SD/MMC card into the SD/MMC
interface (10) while read the USB device,
the unit will play the disc or the SD/MMC.
YELLOW to VIDEO OUT
RED to AUDIO Rch OUT
WHITE to AUDIO Lch OUT
Press
mode, then press GOTO button (30) to
switch to the reading USB mode.
(31) to enter into PRE-STOP
FM MODULATOR OPERATION
This unit has the ability of transmit the
audio to radio device. The default tran-
smitting frequency is 88.7MHz,you can
listen to audio of DVD player by radio device.
To achieve the optimal transmitting effect
of FM modulator, please adjust volume
to maximum level.
Note:
When reading the USB device, please
don’t touch or take out the card. If the is
unable to read the device, please check if
the device is in good condition. You may
also wish to try removing the card fully
from the port, and reinserting it again.
Besides, you can select 87.9MHz to transmit
the audio of DVD player. (The detail you can
refer to the SETUP part on page 19.)
User’s Manual - page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3
Additional Information
About Parental Control
What is MP3?
MP3, whose official name is “MPEG-1 Audio
Layer 3,” is a compression standard
DVD discs have a parental level assigned to
the disc. The range of parental controls is
from 1 to 8. In general, this range
corresponds to established movie rating
systems. Movie rating systems may vary
depending on the country you live in.
Toward the bottom of this page is a small
chart showing the rating system and
corresponding Parental Control ratings for
the USA.
prescribed by the ISO, the International
standardization organization and MPEG
which is a joint activity institution of the IEC.
MP3 files contain compressed audio data.
MP3 encoding is capable of compressing
audio data at extremely high ratios,
reducing the size of music files to as much
as one-tenth their original size. This is
achieved while still maintaining near CD
quality. The MP3 format realizes such high
compression ratios by eliminating the
sounds that are either inaudible to the
human ear or masked by other sounds.
The player can be set in a similar way. If the
player's parental level is set to 8 it will play
all discs. If the player's parental level is set
below 8, only discs with a lower or equal
parental level will play.
Corresponding file systems
This device supports discs formatted with
iso9660 level 1 or level 2. Under the
iso9660 standard, there are some
restrictions to remember.
The maximum nested folder depth is 8
(including the root directory). The number
of characters for a folder/file names are
letters A-Z (all caps), numbers 0-9, and '_'
(underscore).
This device also can play back discs in
Joliet, Romeo, etc., and other standards
that conform to iso9660. However,
sometimes the file names, folder names,
etc., are not displayed correctly.
For example if the player is set to 5, only
discs with parental control ratings of 1-5 will
play. To play a disc with higher number
rating, you must change the player's rating
to a higher number.
Consider a disc that is suitable for most
audiences, and is rated as level 2 for the
most part. However in the middle there are
also scenes rated at 5 & 7 (not suitable for
children). Alternative scenes with lower
rating are included. The player plays the
highest rated scene that the parental
setting allows.
A section of the disc can have several
different sequences that vary in parental
control level. In the above example of a disc
with parental control, the player will show a
different section depending on the parental
control level set in the player's menu.
In this way parents can control the content
of films and there is no indication that any
censorship has occurred.
Unlock
KID SAFE
G
Unlock
PG-R
R
1
2
3
4
5
6
7
PG
PG 13
NC-17
8 ADULT
User’s Manual - page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
You can either choose AUTO SELECT,
which will sense the type of monitor
attached to the output and select NTSC
or PAL as needed. If you know the type of
monitor, you should choose the type in
this menu rather than letting AUTO
SELECT do it for you. This is because
there may be an undesirable small delay
and some flickering of the screen during
the AUTO-SELECT process.
Setup
In DVD mode, when the disc is playing or
in stop mode, press SETUP button (19) to
enter setup menu.
1. When the cursor is in the upper part of
the menu, use
between the different pages.
buttons to move
2. Press button to move the cursor to
the setup page below. Then you can use
the buttons to move between the
different setup options.
SCREEN SAVER
As with computer monitor, video screens
can “burn in” if a still image is displayed
too long on the screen. This unit features
a “screen saver” which produces a
moving image to avoid burn-in. If
SCREEN SAVER is enabled in the Setup
menu, after a few minutes of displaying a
moving screen saver image.
3. Press
the choice list of each setup option, and
or ENTER button to move to
then use
buttons and ENTER
button (18) to change your selection.
4. When the setting is complete, press
SETUP button (19) to return to normal
mode.
* When settings are changed, old settings
are overwritten. Make note of the current
settings before making changes. If the
vehicle’s battery is disconnected, the
settings will be cleared and will return to
the factory settings when power is next
applied.
SETTING the TV TYPE
TV types can vary based on their aspect
ratio. The common monitors fall into one
of three categories:4:3 (PS/Pan and
Scan), 4:3 (LB /Letterbox) or 16:9 (
Widescreen). Playing a video recorded in
one aspect ratio on a monitor with a
different ratio can result in some
mismatches and undesirable display
distortion or cutoffs. Read the following
to assist you in setting up the TV type:
4:3 PS (PAN SCAN)
System Setup
When you open the setup menu, you will
see the system setup page at first, see
below:
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
Select this when connected to a
conventional 4:3 size monitor. The
picture will fill the entire TV screen.
However, due to the mismatch in aspect
ratio, parts of the movie at the extreme
left and right sides will not be visible
(when playing a 16:9 size movie).
PASSWORD
RATING
DEFAULT
FM MODULATOR
EXIT SETUP
TV SYSTEM
TV SYSTEM is used to select the TV
output mode. This player can play discs
recorded in either PAL or NTSC formats.
Select NTSC format, when the unit is
connected to NTSC TV.
4:3 (Pan and Scan) format is the factory
default setting for this product.
Select PAL format, when the unit is
connected to PAL TV.
User’s Manual - page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3 (LETTER BOX)
3) Press or button to select
“RATING” then press ENTER button.
The restriction level (parental level)
input display appears.
When you are playing a widescreen
format video on a normal (4:3) monitor,
the best way to view this is in (4:3)
letterbox format. You can see the full
picture, but there will be a black band at
the top and bottom of the screen.
4) Press
restriction level (1 to 8), and then press
/
button to select the
ENTER button.
5) When the setting is complete, press
SETUP button to return to normal mode.
DEFAULT
Selecting DEFAULT and confirming it will
restore all the System Settings to those
programmed at the factory, except the
Parental Controls and Password.
16:9 (WIDESCREEN)
Select this when connected to a wide
screen TV.
FM MODULATOR
You can select 88.7MH or 87.9 MHz
to transmit the audio of DVD player.
Language Setup
When you open the language setup
menu, you will see the language setup
screen:
PASSWORD
LANGUAGE SETUP
The Password system is used in
conjunction with the Parental Controls
settings to prevent a young person from
changing the settings without
permission. The factory default password
is 0000. If you wish to change this, enter
0000 and when prompted, enter a
differetn 4-digit number.
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
DIVX [R]
EXIT SETUP
There are many choices for the menu,
DVD and subtitle languages. You set the
languages for the DVD player in different
menus than the languages for playback
and subtitling on the discs. Of course,
options vary from disc to disc so some
settings may not be available.
PARENTAL CONTROL LEVEL
Use this function to restrict the viewing of
movies to children of appropriate age
levels only.
1) Press
or
button to select
“PASSWORD” then press ENTER button.
OSD LANGUAGE:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
2) The password input mode is activate.
Use the numeric keypad “0” to “9” to input
the 4-digit password, and then press
ENTER button. (The default password is
“0000” upon shipment from the factory.)
AUDIO LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
User’s Manual - page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBTITLE LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
Specification
1. Supply voltage:
Power Supply Requirements
12V DC (11~15V), test voltage 14.4V,
negative ground
MENU LANG:
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU
GUESE/ITALIAN/RUSSIAN/POLISH
Current consumption:
Less than 2 A
Audio Setup
When you open the AUDIO menu, you will
see the following screen:
2. Signal system:
Compositive video 1.0 0.2Vp-p 75Ω
+
-
AUDIO SETUP
3. Discs played:
(1) DVD-VIDEO disc]
(2)Compact disc(CD-DA/CD-R/CD-
RW/MP3)
AUDIO OUT
KEY
(3) VIDEO CD
EXIT SETUP
1) AUDIO OUT: Change among
SPDIF/OFF, SPDIF/RAW and
SPDIF/PCM.
4. Audio output level:
+
10KΩ (2ch 2.0 0.5Vrms)
-
2) KEY: Change among b, -4, -2, 0, +2,
+4, #.
5. Audio signal output characteristics:
(1) Frequency response:
20Hz - 20 Khz
Digital Setup
(2) S/N ratio:
80 dB(JIS)
When you open the DIGITAL SETUP
menu, you will see the DIGITAL SETUP
screen:
(3) Wow and flutter:
Below measurable limits
DIGITAL SETUP
Note:
OP MODE
DYNAMIC RANGE
DUAL MONO
Specifications and design are subject to
modification, without notice, due to
improvements in technology.
EXIT SETUP
1) OP MODE: Change among LINE
OUT/RF REMOD.
- LINE OUT: LINE OUT mode, with
digital dialog normalization.
- RF REMOD: RF REMODULATION
mode, with heavy compression and
digital dialog normalization.
2). DYNAMIC RANGE: Change among
FULL, 6/8, 4/8, 2/8, OFF.
3). DUAL MONO: Change among
STEREO, MONO L, MONO R, MIX
MONO.
User’s Manual - page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting
If it appears that your DVD unit is faulty,
please first consult this checklist. It may
be that something simple has been
overlooked.
No Sound
Check the audio connections.
The Player Does Not Respond To the
Remote Control
Under no circumstances should you try to
repair the player yourself, as this will
invalidate the warranty. Only qualified
service personnel can remove the cover
or service this player.
Aim the remote control directly at the
sensor on the front of the player.
Remove any obstacles which may
interfere with the signal path.
Inspect or replace the remote control
battery.
No Power
If the power supply is connected to the
car accessory circuits, but the engine is
not turned on, switch the ignition key to
“ACC”.
Distorted or B/W Picture
The disc format is not according to the
TV-set used (PAL/NTSC).
Check if the fuse is blown. Then
replace the new fuse.
No Audio at Digital Output
Check the digital connections
Check the Digital Audio menu to make
sure that the digital output is correctly
set.
Check if the on/off button on the front of
the player is set to on.
No Picture
Check if the monitor or TV is switched
on.
Check if the audio format of the
selected audio language matches your
receiver's capabilities.
Check if select proper mode has been
selected such as Disc Play mode or AV
mode.
Buttons Do Not Work
Press Reset button on the housing of
the DVD unit.
Check the video connection.
Distorted Picture
Check the disc for fingerprints and
clean it with soft cloth, wiping from centre
to edge.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Completely Distorted Picture
The disc format is not according to the
TV-set used (PAL/NTSC).
No Color in Picture
The disc format is not according to the
TV-set used (PAL/NTSC).
Disc Does Not Play
Ensure the disc label is upwards.
Clean the disc.
Check if the disc is defective by trying
another disc.
User’s Manual - page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
|