PHKP 500SE
HOT GLUE GUN
Operation and Safety Notes
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
8
7
6
5
4
A
D
B
E
C
F
9
8
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Introduction
Proper use......................................................................................................................Page
Features..........................................................................................................................Page
Included items ...............................................................................................................Page
Technical details............................................................................................................Page
6
6
6
7
Safety notes
1. Workplace safety.....................................................................................................Page
2. Electrical safety.........................................................................................................Page
3. Personal safety..........................................................................................................Page
4. Careful handling and use of electrical power tools ...............................................Page
7
7
7
8
Operation
Before first use...............................................................................................................Page
Preparing the tool for use .............................................................................................Page
8
8
Maintenance and Cleaning........................................................................Page
Service.........................................................................................................................Page
Warranty...................................................................................................................Page
9
9
9
Disposal......................................................................................................................Page 10
Declaration of Conformity/Manufacturer...................................Page 10
GB/IE/CY
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The following pictograms are used in these operating instructions/on the device:
Read instruction manual!
Volt (AC)
For indoor use only!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
V
~
Danger of burns from nozzle or glue
(up to 200°C)!
Watts (Effective power)
Safety class II
W
Cordless working
Observe caution and safety notes!
Wear protective gloves!
Keep children away from electrical
devices!
Dispose packaging and appliance in
an environmentally-friendly way!
©
Hot glue gun PHKP 500 SE
Features
1
2
3
4
5
Feed channel
Check indicator
Charger connection
Charger with stand
Feed clamp
©
Introduction
You must familiarise yourself with all
safety instructions and functions of the
6
machine before starting it up. Further
Wire stand
7
8
9
10
11
details can be found in the operating instructions.
Keep these instructions in a safe place. If you pass
the tool on to anyone else, please ensure that you
also pass on all the documentation.
Drip tray
Nozzle
Nozzle heat shield
Glue gun connection
Mains lead
©
Proper use
©
Included items
The device is intended for gluing wood, cardboard,
packaging, PVC, carpet, seals, plastic, leather,
ceramic, glass and textiles with hot-melt adhesive.
The material to be glued must be clean, dry and
free of grease. Any other use or modification to the
1 Hot glue gun PHKP500 SE
1 Charger with stand
1 Mains lead
1 Wire stand
tool shall be considered as improper use and could 1 Replacement nozzle (short)
give rise to considerable dangers. The manufacturer 1 Interchangeable nozzle (long)
will not accept liability for loss or damage arising
from improper use.
6 Glue sticks
1 Carry case
The tool is not intended for commercial use.
1 Operating instructions
6
GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction/Safety notes
©
Technical details
2. Electrical safety
Nominal voltage: 230V 50Hz
~
a) The mains plug on the device must
match the mains socket. The plug must
not be modified in any way. Do not
use an adapter plug with devices fitted
with a protective earth. Unmodified
plugs and matching sockets reduce the risk of
electric shock.
b) Avoid touching earthed surfaces such
as pipes, radiators, ovens and refrig-
erators with any part of your body.
There is an increased risk of electric shock if
your body is earthed.
Nominal power: approx. 40W (500W)
Heating up time: approx. 4min.
Protection class: II/
Safety notes
½
ATTENTION! Please read all the instructions
and advice. Failure to observe the instructions
and advice given below may result in electric
shock, fire and/or serious injury.
c) Keep the device away from rain or
moisture. Water entering an electrical device
in creases the risk of electric shock.
KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR FUTURE d)
REFERENCE!
Do not use the mains lead for
any purpose for which it was
not intended, e.g. to carry
the device, to hang up the device or to
pull the mains plug out of the mains
socket. Keep the lead away from heat,
oil and sharp edges. Do not touch the mains
lead if it becomes damaged or severed while
you are working, instead pull the mains plug
out of the mains socket immediately. Damaged
or tangled mains leads increase the risk of
electric shock.
1. Workplace safety
a) Keep your working area clean and
clutter-free. Untidy or poorly lit working
areas can lead to accidents.
b) Do not allow the device to become wet.
Do not operate it in a moist environment.
c)
Keep children and other
people away while you are
e) When working outdoors with an elec-
trical power tool always use extension
cables that are also approved for use
outdoors. The use of an extension cable suit-
able for outdoor use reduces the risk of electric
shock.
operating the electrical tool.
Distractions can cause you to lose control of
the device.
½
Children or persons who lack the
knowledge or experience to use the
device or whose physical, sensory or
intellectual capacities are limited must
never be allowed to use the device
without supervision or instruction by
a person responsible for their safety.
Children must never be allowed to play with
the device.
3. Personal safety
a) Remain alert at all times, watch what
you are doing and always proceed
with caution. Do not use the device if
you are tired or under the influence of
drugs, alcohol or medication. One mo-
ment of carelessness when using the device can
lead to serious injury.
½
ATTENTION! This tool must be placed down
6
on its wire stand
when it is not being used.
GB/IE/CY
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety notes/Operation
©
©
b)
To avoid the danger of injury,
burning and damage to
health:
Operation
Before first use
DANGER OF BURNS! The glue
and the nozzle can reach tempera-
tures of 200°C. Do not touch the
nozzle or the glue. Keep other people and ani-
mals away from the hot glue. On contact with
the skin, hold the affected part under running
cold water for several minutes. Do not try to
remove the glue from the skin.
Preparing the glue site:
½
Do not use inflammable solvents to clean the
glue site.
½
The ambient temperature and temperature of
the materials to be glued must be not less than
+ 5°C and not warmer than + 50°C.
The glue sites must be clean, dry and free of
grease.
Smooth surfaces should be roughened before
gluing.
Warm any materials that are prone to cool
down quickly (e.g. steel) to improve the bond
with the glue.
½
˽
˽
4. Careful handling and use
of electrical power tools
a) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is put away. This precaution is
intended to prevent you from unintentionally
starting the device.
8
˽
Screw on the appropriate nozzle
and fit
6
the wire stand
.
©
Preparing the tool for use
b) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone
use the device if he or she is not
familiar with it or has not read the
instructions and advice. Electrical power
tools are dangerous when they are used by
inexperienced people. Let the device cool
down completely before putting it away. The
hot nozzle can cause damage.
Working with the mains lead connected:
11
1. Connect the mains lead
to the glue gun
10
connection
(see Fig. F).
Insert the mains plug into the mains socket.
6
2. Fold forward the wire stand
Stand the device up.
.
1
3. Push a glue stick into the feed channel
.
4. Let the device heat up for about 4minutes.
The device is now ready for use.
c) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their origins
in poorly maintained electrical power tools.
d) Always work with the mains lead leading
away from the rear of the device.
Cordless working:
11
1. Connect the mains lead
to the charger
3
connection
.
Insert the mains plug into the mains socket.
4
2. Place the glue gun into the charger
3. Push a glue stick into the feed channel
4. Let the device heat up for about 4 minutes.
The device is now ready for use.
.
1
.
5. Repeat the heating-up procedure if the feed
switch becomes stiff or the outcoming glue
becomes viscous.
8
GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation/Maintenance and Cleaning/Service/Warranty
Gluing:
Press the feed clamp
parts only. This will ensure that your device
remains safe to use.
5
˽
to regulate the flow of
WARNING!
If the plug or mains
glue as required for your work.
½
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
1. Apply the glue in individual dots. Apply in zig-
zags on flexible materials such as fabrics.
2. Immediately after applying the glue, press the
two materials together for about 30 seconds. The
glued joint can be loaded after about 5minutes.
3. When you take a break from work, set the
6
©
glue gun down on the wire stand
or in the
Warranty
4
charger
.
4. Remove any glue residue with a sharp knife
after cooling. Glued joints can be loosened
again by applying heat.
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. Your goods
can be transmitted free of cost only in this
manner. This warranty applies only to the
initial purchaser and is non-transferable.
Switching off the device:
½
Pull the mains lead out of the mains socket.
Changing the nozzle:
½
Wear protective gloves.
˽
½
Heat up the device for about 4 minutes.
The warranty covers only material or manufacturing
faults, not normal wear or damage to fragile parts
such as switches or rechargeable batteries. The appli-
ance is intended solely for private, not commercial, use.
8
Change the nozzle
when it is hot.
DANGER OF BURNS! Touch the
8
9
nozzle
only by the heat shield
.
The nozzle tip is hot!
If this product has been subjected to improper or
inappropriate handling, abuse, or interventions not
carried out by one of our authorised sales and
service outlets, the warranty will be considered void.
This warranty does not affect your statutory rights.
©
Maintenance and Cleaning
The glue gun is maintenance-free.
½
WARNING! Pull the mains lead out of the
mains socket before you clean the tool.
Always keep the device clean and dry.
Do not allow any liquids to enter the tool. Use
a soft cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.
GB
˽
˽
DES UK LTD
Tel.:
e-mail: [email protected]
0871 5000 700 (£ 0,10/minute)
IE
Kompernaß Service Ireland
©
Service
Tel.:
1850 930 412 (0,082 €/Min.)
* Standard call rates apply.
Mobile operators may vary.
WARNING!
repaired only by qualified specialist
personnel using original manufacturer
½
Have your device
e-mail: [email protected]
GB/IE/CY
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal/Declaration of Conformity/Manufacturer
©
©
Disposal
Declaration of Conformity/
Manufacturer
The packaging is made entirely of recy-
clable materials, which you may dispose We, Kompernaß GmbH, Burgstr. 21,
of at local recycling facilities.
D-44867 Bochum, Germany, hereby declare
that this product complies with the requirements
of the following EU directives:
Do not dispose of electrical
appliances in household waste.
EU Low Voltage Directive
(2006/95/EC):
EN60335-1,
In accordance with European Directive
2002/96/EC on used electrical and electronic
appliances and its implementation in national law,
used power tools must be collected separately and
recycled in an ecologically compatible manner.
EN60335-2-45
Electromagnetic compatibility
(2004/108/EC):
EN55014,
EN55014-2,
EN61000-3-2,
Information on options for disposing of electrical
appliances after their useful life can be obtained
from your local or city council.
EN61000-3-3
Description of the device:
PARKSIDE Hot glue gun PHKP 500 SE
Bochum, 30.11.2009
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifica-
tions in the course of further development.
10 GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
IAN 38178
KOMPERNASS GMBH
Burgstraße 21
D-44867 Bochum
© by ORFGEN Marketing
Last Information Update: 11/2009
Ident.-No.: PHKP 500SE112009-6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|