Camera Controller
Model
AK-HRP900P
Before attempting to connect, operate or adjust this product,
please read these instructions completely and save this manual for future use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Check the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Controls and their Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
_ Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
_ Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
_ Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
How To Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
_ Lens connection in the case of no swivel stand . . . . . . . . . . . . . . . . . . . . . . .13
Multi-purpose digital camera control system configuration 1 . . . . . . . . . . . . . . .14
Multi-purpose digital camera control system configuration 2 . . . . . . . . . . . . . . .15
Multi-purpose digital camera control system configuration 3 . . . . . . . . . . . . . . .16
Communication speed setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Example of Rack Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
_ How to rack-mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
_ How to change the rear panel position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Appearance and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Outline
≥ This unit is a camera controller for multi-purpose camera (AK-HC900P). This
unit is connected to a multi-purpose camera with one multi-cable, and capable
of transmitting and receiving various camera and lens control signals, analog
picture signals of cameras, and generator lock signals (3-value SYNC).
≥ The extension distance between this unit and the camera is 33 ft (10m) max.
≥ It is possible to control the swivel stand from the pan-tilt control panel AW-
RP301 by using the swivel stand control input connector.
Check the Accessories
Coupling . . . . . . . . . . . . . . . . . . . . . . .1 pc
Multi-cable . . . . . . . . . . . . . . . . . . . . . .1 pc
Seal . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc
Setscrews . . . . . . . . . . . . . . . . . . . . .8 pcs
M4 x 8 mm . . . . . . . .4 pcs
M5 x 8 mm . . . . . . . .4 pcs
Precautions for Use
≥ We recommend that the AC adapter AW-PS505P is used for power supply.
≥ Handle the unit with care.
If dropped or given a strong shock, it may cause a trouble or accident.
≥ Use the unit in a temperature range of 32oF to 104oF (0oC to + 40oC).
If used at a temperature below 32oF or higher than 104oF, it may cause bad influences to
the component parts.
≥ Turn off the power before connecting or disconnecting the cable.
When connecting or disconnecting the cable, be sure to turn off the power switch of the
unit beforehand.
≥ Avoid using the unit outdoors.
≥ Install the unit 3.3 ft (1 m) away from the monitor.
≥ Maintenance
Pull out the power cord plug and clean the unit with dry cloth. If it is hard to clean,
moisten the cloth with a diluted neutral detergent solution and squeeze it well and lightly
wipe the unit.
Precautions
≥ Do not use volatile solvents such as benzene or thinner.
≥ When using a chemical mop, carefully read the instructions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
_Operation panel
1
2
3
<
=
>
Camera Controller
SCENE
ON
OFF
OPERATE
CAM
POWER
ALARM
TEST
PRE
USER1
USER2
?
@
A
SD CARD
MODE
BAR
AUTO
WHITE
BLACK
TALLY
4
5
6
GAIN
BLACK
B
C
D
E
MENU
ON
MENU
4
7
ND FLTER
CLEAR 1/4 1/16 1/32
CC FLTER
3200 4300 6300 CROSS
PRESET
3
1
2
5
F
G
8
9
GAIN
9dB
SHUTTER
OFF STEP SYNCRO
0
18dB
S1
S2
SPEED
TELE
ZOOM
FOCUS
S3
FAR
CHECK
IRIS
M-PED
AUTO
WIDE
NEAR
:
; HIJ
K
L
1 Power indication LED [POWER]
It is lighted green when the power control switch 2 is ON. It goes out when the power
control switch 2 is OFF.
2 Power control switch [POWER ON/OFF]
With this switch turned ON, the unit and the camera connected are simultaneously
turned on. With it turned OFF, both of the unit and the camera are turned off.
3 SD card slot [SD CARD]
With an SD card inserted, the camera setting data can be recorded on the SD card.
4 Tally LED [TALLY]
It is lighted red when tally signal is input to the tally signal input terminal Q.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
5 Menu operation switch [MENU]
Operation switch for camera menu.
Item selection or data change can be done by turning this switch. When this switch
pushed, the item and data are settled.
6 Menu ON switch [MENU ON]
Used to turn the camera menu ON/OFF.
7 Preset memory switch [MEMO]
Preset memory can be done up to 5 points with respect to lens zoom, focus, and iris
position (when iris select switch K is at [MANU]). When using the preset memory, first
set the lens focus, zoom, and iris. Next, push this switch, then the switch is lighted.
Subsequently, push the desired preset position select switch 8. With the data stored in
the memory, the switch is lighted.
8 Preset position select switch [PRESET]
It calls the lens zoom, focus and iris settings previously stored in the memory, and
brings the lens into preset operation.
9 Speed change switch [SPEED]
High speed operation is obtained when the zoom operation lever : and the focus
adjust lever ; are operated while pressing this switch. The switch is lighted while being
pressed.
: Zoom operation lever [ZOOM TELE/WIDE]
Used for zoom operation of the lens. The zoom speed changes with the shifting angles
of the lever. With the zoom operation lever direction change switch T set at [NOR],
when the lever is shifted to [TELE], the zoom operates in a telescopic mode, and when
shifted to [WIDE], it operates in a wide angle mode. With the zoom operation lever
direction change switch T set to [REV], the zoom can be operated in the opposite
direction.
; Focus adjust lever [FOCUS FAR/NEAR]
Used to adjust the lens focus. The focus can be controlled in speed variable fashion by
regulating the shifting angle of this lever.
With the focus adjust direction change switch U set at [NOR], when this lever is shifted
to [FAR], the focus is adjusted to a far distance, and when shifted to [NEAR], the focus
is adjusted to a near distance. With the focus adjust direction change switch U set to
[REV], the focus can be adjusted in the opposite direction.
< Operation panel active switch [OPERATE]
This is an active switch for panel function. It can be operated when the switch is lighted.
It does not work when the switch is not lighted.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
= Alarm indication LED [ALARM]
It lights up when an alarm is generated (in case of fan stop, wrong communication
speed, etc.).
Note:
In case of wrong communication speed, change the DIP SW position in the unit to
match the camera and communication speed so that the alarm goes out.
> Scene file select switch [SCENE]
Used to select the scene file previously set on the camera.
Note:
With [PRESET] selected, it results in the factory-adjusted setting.
? Mode select switch [MODE]
Used to select the camera color bar signal, test signal and camera picture signal. With
the switch set to [BAR], [TEST], the color bar signal and the test signal are output from
the monitor signal output terminal of this unit. With it set to [CAM], the picture taken by
the camera is output.
@ Auto white start switch [AUTO WHITE]
With this switch pressed, the white balance is automatically adjusted. During the
operation, WHTE LED blinks, and it goes out when the adjustment is normally finished.
In case of NG, it lights up for a while and then goes out.
Note:
It does not operate when the mode is [BAR].
A Auto black start switch [AUTO BLACK]
With this switch pressed, the lens is automatically closed, and the black balance is
adjusted. During the operation, BLACK LED blinks, and it goes out when the
adjustment is normally finished. In case of NG, it lights up for a while and then goes
out.
B R/B gain adjust volume [GAIN]
Used to adjust the R/B signal gain of the camera.
C R/B pedestal adjust volume [BLACK]
Used to adjust the R/B signal pedestal level of the camera.
D ND filter select switch [ND FILTER]
Used to select the optical filter (ND) of the camera.
E CC filter select switch [CC FILTER]
Used to select the optical filter (CC) of the camera.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
F Gain select switch [GAIN]
Used to select the master gain of the camera. It changes in the order of 0dB )9dB
)18dB )S1 (Super gain 1) )S2 )3dB )0dB.
Note:
For super gain setting, check with the camera menu.
G Shutter select switch [SHUTTER OFF/STEP/SYNCHRO]
Used to select the electronic shutter of STEP and SYNCHRO set on the camera.
Note:
For electronic shutter setting, check with the camera menu.
H Indication change switch [CHECK]
Used to change the indication item.
I Indicator
It indicates the F value of iris.
J Master pedestal adjust volume [M-PED]
Used to adjust the pedestal setting of Y (luminance) signal of the camera.
K Lens iris auto/manual select switch [IRIS AUTO]
Used to select the lens iris adjusting method.
With the switch set to [AUTO], the lens is shifted to auto iris mode, and the iris is
automatically adjusted according to the amount of light coming into the lens.
With the switch set to [MANU], the lens iris can be moved in the range from close to
open by turning the lens iris adjust VR (volume) L.
When storing the lens iris in the preset position select switch 8 by using the preset
memory switch 7, set to [MANU] mode. It does not work in [AUTO] mode.
L Iris adjust volume [IRIS]
When the lens iris auto/manual select switch K is set at [MANU], the lens iris can be
moved in the range from close to open.
When the lens iris auto/manual select switch K is set at [MANU], press the preset
position select switch 8 to call the preset memory, then the lens iris position is set to
the preset memory position irrespective of the VR (volume) position. After that, when
the VR is turned, the lens iris returns to the value of VR.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
_Rear panel
CAMERA I / F
DC 12V IN
MONITOR OUT
G/L IN
TALLY IN
BREAKER
P/T CONT
Y
Pb
Pr
M
N
O
P
Q
R
S
M Camera connector [CAMERA I/F]
Connected to the camera (AK-HC900P) with the attached cable.
Pin No
Signal
Y signal output
Pb signal output
Pr signal output
Sync signal input
DC 12V
Pin No
Signal
Y signal GND
Pb signal GND
Pr signal output
Sync signal GND
DC GND
15 14 13 12 11 10 9
8
1
2
3
4
5
6
7
8
7
6
5
4
3
2
1
9
10
11
12
13
14
15
Frame GND
TXD (C)
TXD (H)
RXD (H)
RXD (C)
TXD: Data from camera to remote controller.
RXD: Data from remote controller to camera.
N Swivel stand control signal input connector [P/T CONT (RJ-45)]
Connects the swivel stand control signal output of the pan-tilt control panel (AW-
RP301).
O Monitor signal output connector [Y/G, Pb/B, Pr/R] (BNCk3)
Outputs the analog signal from the camera.
The output can be changed to R, G, B/Y, Pb, Pr by the camera menu setting.
P Synch signal input connector [G/L IN] (BNCk1)
Inputs the sync signal to the camera. Input 3-value SYNC as the synch signal.
Q Tally signal input connector [TALLY IN] (2-pin connector block)
Connected to the tally connector from the system. When the HOT connector is at GND
level, the tally LED is lighted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
R Breaker [BREAKER]
DC power breaker. The breaker operates to cut off the power in case of over-current.
S DC12V input connector [DC12V IN] (XLR4-pin)
Connects the AC adapter. We recommend that the AW-PS505P (option) is used.
Pin No
Signal
4
1
2, 3
4
GND
–––
1
3
2
12V
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their Functions
_Front panel
ZOOM
FOCUS
REVERSE
REVERSE
NOR
REV
NOR
REV
T
U
T Zoom operation lever direction change switch [ZOOM REVERSE]
Used to change the direction of the zoom operation lever.
With this switch set at [NOR], when the zoom operation lever : is shifted to [TELE], the
zoom operates in a telescopic mode, and when shifted to [WIDE], zooming is made in a
wide angle mode.
With this switch set to [REV], it can be operated in the opposite direction. Also, with this
switch set to [REV], the operating direction does not match the indication on the panel.
In that case, use the attached seal for proper indication.
U Focus adjust direction change switch [FOCUS REVERSE]
Used to change the direction of the focus adjust lever.
With this switch at [NOR], when the focus adjust lever ; is shifted to [FAR], the focus is
adjusted to a far distance, and when shifted to [NEAR], the focus is adjusted to a near
distance.
With this switch set to [REV], focusing can be made in the opposite direction. Also, with
this switch set to [REV], the operating direction does not match the indication on the
panel. In that case, use the attached seal for proper indication.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect
Make the connection with power supply to the unit turned off.
≥ Use AW-PS505P (option) as the AC adapter for control panel.
≥ Use a swivel stand, AW-PH300A, AW-PH500, AW-PH600, and an adapter suited for
the swivel stand.
≥ When no swivel stand is used, connect both of the motor-driven zoom lens iris control
cable and remote (zoom/focus) cable to the camera. (see page 13)
≥ When a swivel stand is used, connect the iris control cable to the camera, and the
remote (zoom/focus) cable to the swivel stand. (see the illustration below)
≥ For the connection system of each unit, refer to pages 14 to 16.
≥ Connect the motor-driven zoom
To iris connector
Iris control
cable
lens iris control cable to the
camera, and the remote
(zoom/focus control) cable to the
swivel stand. If the motor-driven
zoom lens remote (zoom/focus
control) cable is connected to
the camera, the lens cannot be
controlled.
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
1
2
S
D
I
O
U
T
1
/
F
Remote
(zoom/focus
control) cable
N D / E X T
I N
S D I
L E N S E I / F
I / F
C A M E R A
To lens interface
connector
D
C
I
1
2
V
CONTROL IN
IP/RP
N
1394
C
S
OP
G/L
I
N
Pb OUT
Pr
OUT
/
SDI
Y/VIDEO
OUT
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect
_Lens connection in the case of no swivel stand
_How to mount the lens
≥ A lens of any maker’s can be used provided that it is a bayonet type (B4 mount) lens
of 2/3 inch standard.*
1 Turn the lens fixing ring knob counterclockwise and remove the lens mount cap.
2 Mount the lens and completely secure it by turning the lens fixing ring knob
clockwise.
3 Connect the iris control cable to the lens connector.
4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the
rear panel.
*Note that some lenses are uncontrollable with respect to zoom and focus function.
B
R
E
A
K
E
/
R
Remote (zoom/focus control)
cable
Z
F
O
O
O
C
M
S
U
(Connect the cable to the swivel
stand when used.)
1
2
S
D
I
O
U
T
Iris control cable (to
lens connector)
Lens fixing ring knob
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose digital camera control system configuration 1
Remote (zoom/focus
control) cable
B
R
E
A
K
E
R
Z
F
O
O
O
M
/
C
U
S
HD-SDI
Coaxial cable (5C-FB)
2
S
D
I
O
U
T
1
/
F
D-SUB 15-pin
Multi-purpose digital
camera
Remote
control
spec. lens
AK-HC900P
Multi-cable (17ft)
AK-HDMLTCA05
HD monitor
AC adapter
O
I
AW-PS505P
Ext. sync signal (3-value SYNC)
Camera Controller
SCENE
ON
OFF
OPERATE
CAM
POWER
ALARM
TEST
PRE
USER1
USER2
SD CARD
MODE
BAR
AUTO
WHITE
BLACK
TALLY
GAIN
BLACK
MENU
ON
MENU
4
ND FLTER
1/16 1/32
CC FLTER
3200 4300 6300 CROSS
1
0
1
/
4
PRESET
3
DC power
cable
1
2
5
D-SUB 15-pin
GAIN
9dB
SHUTTER
OFF STEP SYNCRO
18dB
SPEED
ZOOM
FOCUS
S1
S2
S3
CHECK
TELE
FAR
I
R
I
S
M-PED
AUTO
WIDE
NEAR
Camera controller
AK-HRP900P
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose digital camera control system configuration 2
Remote
control
spec. lens
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
HD-SDI
Coaxial cable (5C-FB)
1
2
S
D
I
O
U
T
1
/
F
Multi-cable (17ft)
AK-HDMLTCA05
Multi-purpose digital camera
AK-HC900P
Remote
(zoom/focus
control) cable
O
I
AC adapter
AW-PS505P
N D / E X T
I N
S D I
L E N S E I / F
I / F
C A M E R A
D
C
I
1
2
V
C
O
N
I
T
P
R
O
L
I
N
N
1394
HD monitor
/
RP
C
S
OP
G/L
I
N
P
b
OUT
P
r
/
SDI
Y
/
VIDEO
OUT
OUT
O
I
Swivel stand
AW-PH300A
AC adapter
AW-PS505P
Ext. sync signal (3-value SYNC)
Camera Controller
SCENE
ON
OFF
OPERATE
CAM
POWER
ALARM
TEST
PRE
USER1
USER2
SD CARD
Swivel stand control is
possible for AW-
PH500/PH600 as well.
MODE
BAR
AUTO
WHITE
BLACK
TALLY
GAIN
BLACK
MENU
ON
MENU
4
ND FLTER
1/16 1/32
CC FLTER
1
0
1
/
4
3200 4300 6300 CROSS
PRESET
3
DC
1
2
5
GAIN
9dB
SHUTTER
18dB
OFF STEP SYNCRO
SPEED
ZOOM
FOCUS
S1
S2
power
cable
S3
CHECK
TELE
FAR
I
R
I
S
M-PED
AUTO
WIDE
NEAR
Swivel stand controller
AW-RP301
Camera controller
AK-HRP900P
AC adapter
AW-PS301
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose digital camera control system configuration 3
Remote
control
spec. lens
Multi-cable (1.7ft)
AK-HDMLTCA05
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
HD-SDI
Coaxial cable (5C-FB)
1
2
S
D
I
O
U
T
Interface adapter
AK-HTF900P
1
/
F
Multi-purpose digital camera
AK-HC900P
Remote
(zoom/focus
control) cable
Trans-
mission
O
I
AC adapter
AW-PS505P
N D / E X T
I N
S D I
Multi-cable (17ft)
AK-HDMLTCA05
L E N S E I / F
I / F
C A M E R A
D
C
I
1
2
V
C
O
N
I
T
P
R
O
L
I
N
N
1394
/
RP
C
S
OP
HD monitor
G/L
I
N
P
b
OUT
P
r
/
SDI
Y
/
VIDEO
OUT
OUT
O
I
Swivel stand
AW-PH300A
O
I
AC adapter
AW-PS505P
AC adapter
AW-PS300
Camera Controller
ON
OFF
SCENE
USER1
OPERATE
CAM
POWER
ALARM
TEST
PRE
USER2
SD CARD
Swivel stand control is
possible for AW-
PH500/PH600 as well.
MODE
BAR
AUTO
WHITE
BLACK
TALLY
GAIN
BLACK
MENU
ON
MENU
4
ND FLTER
1/16 1/32
CC FLTER
3200 4300 6300 CROSS
1
0
1
/
4
PRESET
3
DC
power
cable
1
2
5
GAIN
9dB
SHUTTER
OFF STEP SYNCRO
18dB
SPEED
TELE
ZOOM
FOCUS
S1
S2
S3
CHECK
FAR
I
R
I
S
M-PED
AUTO
WIDE
NEAR
Swivel stand controller
AW-RP301
Camera controller
AK-HRP900P
AC adapter
AW-PS301
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Speed Setting
The communication speed is factory-adjusted to 38.4Kpbs.
In case it does not match the communication speed of multi-purpose camera AK-HC900P,
the alarm LED is lighted. Remove the rear panel and change the DIP SW on the board
and adjust it to the communication speed of the camera.
Remove the
screw and open
the bottom
plate, then DIP
SW can be seen
SW5 SW4 SW3
in there.
ON
ON
125Kbit/Sec
1
2
3
3
3
4
4
4
1
2
3
4
SW3
5
6
7
8
ON
Change the
38.4Kbit/Sec
9600Kbit/Sec
communication report
by the combination of
SW3 No.1 and No.2 on
ROP CPU board.
1
2
ON
1
2
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of Rack Mount
_How to rack-mount
Install the main body on the rack as shown below.
Remove the rack mount
bracket screw when installing
Rack mount bracket
Coupler
Attached
screw
Coupler
fitting
holes
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of Rack Mount
_How to change the rear panel position
1 Remove the three screws on the
3 Install the rear panel on the bottom with
the three screws.
bottom to remove the blank panel.
Screw
Screw
CAMERA
I
/
F
DC 12V IN
Blank panel
P/T CONT
MONITOR OUT
G/L IN
TALLY IN
BREAKER
Y
Pb
Pr
2 Remove the three screws on the rear
4 Install the blank panel on the rear side
panel to remove the rear panel.
with the three screws.
Screw
Screw
CAMERA
I
/
F
DC 12V IN
P/T CONT
MONITOR OUT
G/L IN
TALLY IN
BREAKER
Blank panel
Y
Pb
Pr
* When installing, take care so that the internal wires are not caught by the panel.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Appearance and Dimensions
(
): mm
CAMERA
I
/
F
DC 12V IN
P/T CONT
MONITOR OUT
G/L IN
TALLY IN
BREAKER
Y
Pb
Pr
Camera Controller
SCENE
ON
OFF
OPERATE
CAM
POWER
ALARM
PRE
USER1
USER2
SD CARD
MODE
BAR
AUTO
TEST
WHITE
BLACK
TALLY
GAIN
BLACK
MENU
ON
MENU
4
ND FLTER
1/4 1/16 1/32
CC FLTER
3200 4300 6300 CROSS
1
0
PRESET
3
1
2
5
GAIN
9dB
SHUTTER
OFF STEP SYNCRO
18dB
SPEED
ZOOM
FOCUS
S1
S2
S3
TELE
FAR
CHECK
IRIS
M-PED
AUTO
WIDE
NEAR
8-5/16z (210)
ZOOM
REVERSE
FOCUS
REVERSE
NOR REV
NOR
REV
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power supply:
DC +12V (XLR 4-pin connector)
Power consumption: 5 W (camera controller only)
1is the safety information.
Swivel stand control input:
System tally input:
Switch function:
Control signal (RJ-45 8P modular jack)
Tally signal (2P connector block)
Power control, preset memory, preset position select,
speed polarity change, menu ON/OFF, menu operation,
operation panel active, scene file select, mode select,
auto white start, auto black start, ND filter select, CC
filter select, gain select, shutter select, lens iris
auto/manual select, indication change, zoom operation
lever direction change, focus adjust direction change.
Iris (lens iris), zoom, focus, R/B gain, master pedestal,
R/B pedestal
Adjusting function:
Connection cable:
Multi-cable 1 pc
Cable max. extension distance: 33 ft (10m)
Operating temperature range:
Dimensions:
32oF to 104oF (0oC to +40oC)
8-5/16(W)k3-1/2(H)k6-15/16(D) inch
(210k88k176 mm)
Weight:
Finish:
Approx. 3.3 lbs (1.5kg)
AV ivory coating (Munsell 7.9Y 6.8/0.8 approx. color)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7000
EASTERN ZONE
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:
Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300
Printed in Japan
VQT0A79
@3
F0902H
Download from Www.Somanuals.com. All Manuals Search And Download.
|