Model No. KV-S6050W / KV-S6055W /
KV-S6050WU / KV-S6055WU
These instructions contain the information on operating the scanner. Before reading these
instructions, please go through the installation manual enclosed with this unit.
Please carefully read these instructions, the enclosed installation manual and maintenance
manual. Keep these documentation in a safe place for future reference.
Keep the CD-ROM in the protective case. Do not expose the CD-ROM to direct sunlight or
extreme heat and do not scratch or smudge the surface of the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a Panasonic “High Speed Scanner”.
• For the versatile solution for imaging needs, Panasonic developed Panasonic Image Enhancement Technology to
improve the quality of your originals.
• Red and Green lamp setting right from the display panel to select dropout color quite easily. (Only back scanning
for KV-S6055W)
• With these easy-to-use functions, reliable paper handling, easy maintenance and more, Panasonic would like to
contribute to your imaging needs.
• Difference between the KV-S6055W and KV-S6050W is only the contact image sensor for back scanning.
∫
System requirements
When using the scanner, the required host computer conditions are as follows.
®
®
CPU
Pentium 166MHz or higher (Pentium III, Celeron™ processor or higher is recommended.)
Memory (RAM)
OS
64 MB or higher (128 MB or higher is recommended.)
®
®
®
®
®
Windows 95 / Windows 98 / Windows NT / Windows 2000 / Windows Me
SCSI board
Adaptec SCSI card 2930 / 2940 / 19160 / 29160N Series are recommended.
§ The scanning speed differs depending on the host computer operating environment or application.
Important
• Do not duplicate currency.
• Do not duplicate copyrighted material or the work of others except for the purpose of private use.
• Do not duplicate any kind of certificates, licenses, passports, official or private documents, and the like.
As an ENERGY STAR® Partner, Panasonic has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
(ENERGY STAR is a U.S. registered mark.)
®
®
®
• Windows 95 is Microsoft Windows 95 operating system.
®
®
®
• Windows 98 is Microsoft Windows 98 operating system.
®
®
®
• Windows NT is Microsoft Windows NT operating system.
®
®
®
• Windows 2000 is Microsoft Windows 2000 operating system.
®
®
®
• Microsoft , Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation
in the United States and / or other countries.
®
• Pentium is a registered trademark of Intel Corporation.
• Celeron™ is trademark of Intel Corporation.
• Each company’s name or company product name is each company’s trademark or registered trademark.
The information given in these Operating Instructions is subject to change without notice.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Page
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before You
Start
• Display panel and keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Setting the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Scanning thick documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Operation
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
• How to use the control sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
• Outside of the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
• Inside the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
• Cleaning the rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Care
and
Maintenance
• Document glass and cover sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
• Roller cleaning paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Appendix
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Español
AVISO:
PARA EVITAR LLAMAS O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A
LA LLUVIA NI A LA HUMEDAD.
LA TOMA DE CORRIENTE DEBERÁ ESTAR CERCA DE ESTE EQUIPO Y EN UN LUGAR
DE FÁCIL ACCESO.
Svenska
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
For your safety please read the following text carefully.
(For United Kingdom only)
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 5 amp. fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has
a rating of 5 amps. and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark
or the BSI mark
on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the
fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the
plug cut off and disposed of safely.
There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp. socket.
If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified
electrician.
WARNING : This appliance must be earthed.
IMPORTANT : The wires in this mains lead are coloured in accordance with the following code.
Green-and-Yellow
Blue
Brown
: Earth
: Neutral
: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the Earth symbol
or coloured Green-and-Yellow.
The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N or
coloured Black.
The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L or
coloured Red.
How to replace the fuse :
Open the fuse compartment with a screwdriver and replace
the fuse.
FUSE
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
English
The product should be used only with a power cord that is supplied by the manufacturer.
Français
Le produit ne devra être utilisé qu’avec le cordon d’alimentation fourni par le fabricant.
Deutsch
Dieses Gerät darf nur mit dem vom Hersteller gelieferten Netzkabel verwendet werden.
Español
Este producto deberá utilizarse solamente con el cable de alimentación suministrado por el
fabricante.
Svenska
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
For roller cleaning paper
Before using the roller cleaning paper, please read these instructions completely. Keep these instructions for future
reference.
English
WARNING
• Do not drink or inhale the roller cleaning paper fluid including isopropyl alcohol.
• The roller cleaning paper may be harmful to sensitive skin, so please use protective gloves.
• Do not use the roller cleaning paper near a heater or open flame.
• Do not store the roller cleaning paper in direct sunlight or in a place over 40 oC (104 oF).
• Only use the roller cleaning paper to clean the rollers and scanning area.
• If you need more information about the roller cleaning paper, please refer to the Material Safety Data Sheet
(MSDS).
• Please ask your Panasonic sales company about obtaining the Material Safety Data Sheet.
KEEP AWAY FROM FIRE.
Français
Avertissement
• Ne pas absorber le liquide du papier de nettoyage de rouleaux fourni ni en respirer les émanations car il contient
de l’alcool isopropylique.
• Le papier de nettoyage de rouleaux pouvant être néfaste pour les peaux sensibles, utiliser des gants de
protection.
• Ne pas utiliser le papier de nettoyage de rouleaux à proximité d’un feu ou d’une flamme vive.
•
Ne pas ranger le papier de nettoyage de rouleaux en plein soleil ni à une température dépassant 40 oC (104 oF).
• Utiliser le papier de nettoyage de rouleaux exclusivement pour le nettoyage des rouleaux et de la surface de
balayage.
• Pour tout renseignement complémentaire sur le papier de nettoyage de rouleaux, voir la feuille de données sur
la sécurité du matériel.
• Pour la feuille de données sur la sécurité du matériel, s’adresser au revendeur Panasonic.
NE PAS APPROCHER DU FEU.
Deutsch
WARNUNG
• Die Walzenreinigungspapier-Reinigungsflüssigkeit enthält Isopropylalkohol und darf auf keinen Fall getrunken
oder inhaliert werden.
• Bitte Schutzhandschuhe tragen, da das Walzenreinigungspapier bei empfindlicher Haut Reizungen verursachen
kann.
• Das Walzenreinigungspapier nicht in der Nähe von Heizgeräten oder offenen Flammen verwenden.
• Das Walzenreinigungspapier nicht in direkter Sonneneinstrahlung oder an Orten lagern, an denen Temperaturen
von mehr als 40 oC erreicht werden.
• Zum Reinigen der Walzen und des Scanbereichs ausschließlich das Walzenreinigungspapier verwenden.
• Weitere Informationen zum Walzenreinigungspapier sind dem Materialsicherheits-Datenblatt zu entnehmen.
• Das Materialsicherheits-Datenblatt ist auf Wunsch von Ihrem Panasonic-Fachhändler erhältlich.
VON FEUER FERNHALTEN!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Español
ADVERTENCIA
• No beba el líquido del papel de limpieza de rodillos ni aspire las emanaciones del alcohol isopropílico que
contiene.
• El papel de limpieza de rodillos puede ser perjudicial para las pieles sensibles, así que póngase guantes de
protección.
• No utilice el papel de limpieza de rodillos cerca de una calefacción o una llama.
• No guarde el papel de limpieza de rodillos expuesto a la luz solar directa ni en un lugar donde la temperatura
sea superior a 40 °C.
• Utilice solamente papel de limpieza de rodillos para limpiar los rodillos y el área de escaneado.
• Si necesita más información acerca del papel de limpieza de rodillos, consulte la hoja de datos de seguridad del
material (MSDS).
• Pregunte a la compañía de ventas Panasonic cómo obtener la hoja de datos de seguridad del material.
MANTÉNGALO ALEJADO DEL FUEGO.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
The following precautions are recommended to extend the life of the unit.
Prior to scanning, remove, all Do not place any liquids near the unit. Do not place books, paper, or other
staples and paper clips from pages.
items on the unit.
— Accidental spillage of liquid into the
unit may cause severe damage. If
this occurs, turn the unit off, unplug
the power cord and call for service.
Do not place the unit in an area where there is a lot of Do not leave the power cord plugged into the AC outlet
smoke, dust, chemical fumes or vibration. if the unit is not used for an extended period.
EX
Do not place the unit on an uneven or unstable surface. Do not disassemble the unit.
This will void your warranty.
It is recommended that if the scanner has to be moved, For safety reason, do not look directly at the light.
at least two people carry it.
(You may damage your eyes.)
Document
≥
Special care should be taken to protect the unit if it is used in a less than optimum environment, such as a dusty or
sandy area.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Operating Environment
Do not place the unit in direct sunlight or in a cold draft. Do not operate or place the unit in a vertical position.
Do not place the unit near a heating appliance or an air Do not place the unit near other appliances which
conditioning vent. Do not place the unit in a room with generate large electrical noise.
extremely high or low humidity.
Do not place the unit on a carpet. (Static electricity can Do not drink or inhale the included roller cleaning paper
cause the unit to malfunction.)
fluid.
The roller cleaning paper may be harmful to sensitive
skin, so please use protective gloves.
Do not use the roller cleaning paper near a heater or
open flame. This may cause a fire.
≥
Power Source
• Use a voltage level that does not vary more than ±10 % from the voltage level marked on the nameplate
(located on the back side of the scanner ).
• Do not use an extension cord.
• This scanner should be connected to a grounded outlet.
• Do not use a line conditioner, transient suppressor or surge protector.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
∫
CD-ROM
To prevent the CD-ROMs from accidental damages:
Do not touch or write on the surface Do not leave the disc out of the Do not leave the disc in direct
of the disc. protective case. sunlight or near heat sources.
Do not place heavy objects on the To clean the disc, hold the disc by
disc case or drop the case.
its edges and wipe it from the
center to the edges with a dry, soft
cloth.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Identification
Hopper
Document guide
Document cover
ADF door release
Inside the ADF door.
ADF door
Display panel
When performing
each setting, used to
display the scanning
conditions, etc.
Manual feed selector
Front door
Power indicator
Exit substopper
When the power is turned on,
the green indicator lights.
When an error occurs, the
indicator will change to red,
and light steadily or flash.
Front door release
Inside the front door.
Exit document stopper
Hopper extension tray
Imprinter door
(Top door)
Used for attaching the
imprinter unit and ink
Connectors
Power switch
[ : on position
≤ : off position
Used to connect the
scanner unit to a
host computer.
AC inlet
Power cord
Fan exhaust vent
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
The required settings must be selected prior to scanning.
Information and conditions are shown on the LCD (Liquid Crystal Display).
R e a d y
∫
Display panel and keys
SCAN
COUNTER
OTHERS
MODE
READY/
ERROR
IMPRINT
HOME
SELECT
STOP/START
SCAN
: Press to enter the scanning setting menu.
LCD
:
Up to 32 characters can be displayed
during scanning or setting.
COUNTER
: Press to enter the counter setting menu.
: Press to enter the imprinter setting menu.
: Press to enter “others” setting menu.
IMPRINT
OTHERS
: Press to advance to the next mode in the
selected menu.
3
4
: Press to return to the previous mode in
the selected menu.
: Press to exit from the setting section and
return to the ready status.
Also, this function can change the display
language.
HOME
: Press to advance to the next value in the
selected mode.
1
2
STOP / START
: Press to start or stop scanning a document
or batch of documents.
: Press to return to the previous value in
the selected mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
∫
Setting the language
• Select English, German or Japanese as the language which is to appear on the LCD display.
• The language setting mode is appeared automatically when the unit’s power is turned on for the first time after
the unit was purchased. English is the default language.
Turn the power on while pressing
the HOME key.
1
S e t
L a n g u a g e
L e t t e r
• When “High Speed Scanner” or other
words appear on the LCD, release the
HOME key.
E n g l i s h
Use the 2 key or the 1 key to select
2
3
“English
Letter”,
“English
A4”,
S e t
L a n g u a g e
“Deutsch A4” or “
A4”.
D e u t s c h
A 4
Press the HOME key.
• The display will change to the selected
language, then the scanner will be ready.
B e r e i t
• This setting will remain until it is changed
to another setting.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
∫
Setting the scanner
The following parameters can be customized using the scanner’s various setting modes. If the application
software provides these features, it will be supported by the scanner.
Scan menu
No.
Item
LCD
Content
Page
Selection for density when scanning the front
side of a document.
01
02
03
04
05
06
07
08
09
10
Front side brightness
F. Brightness
Selection for emphasis when scanning the
front side of a document.
Front side image emphasis
Front side contrast
F. Emphasis
F. Contrast
22
Selection for contrast when scanning the front
side of a document.
Selection for gradation when scanning the
front side of a document.
Front side halftone
F. Halftone
Back side dropout color
(For KV-S6055W series only)
Color selection for dropout when scanning
the back side of a document.
B. Color drop
B. Brightness
B. Emphasis
B. Contrast
B. Halftone
Noise Reduct.
Back side brightness
(For KV-S6055W series only)
Selection for density when scanning the back
side of a document.
23
Back side image emphasis
(For KV-S6055W series only)
Selection for emphasis when scanning the
back side of a document.
Back side contrast
(For KV-S6055W series only)
Selection for contrast when scanning the
back side of a document.
Back side halftone
(For KV-S6055W series only)
Selection for gradation when scanning the
back side of a document.
Selection for noise reduction when scanning
a document.
Noise reduction
Black line removal
Scanning mode
Selection to choose the black lines which
appear at the top, bottom and left/right sides
of the image after scanning the document.
BLK Line
Remove
11
12
24
Scanning
Mode
Selects whether documents are scanned at
actual size or reduced (Fit to page) size.
Selection to choose to detect double feeding
function.
When scanning very important documents,
confirm if the number of scanned pages
displayed on the LCD matches the number of
actual pages.
13
Double feed detection
Double Feed
Setting the “Double Feed”
detector action
Double Feed
Action
Selects the action of the Double Feed
Detector when double feed occurs.
14
15
25
Setting the “Double Feed”
detector sensitivity
Selects the sensitivity of the Double Feed
Detector.
Double Feed
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
Scan menu
No.
Item
LCD
Content
Page
Selection for feed speed when a document is
being scanned.
16
Feed speed
Feed Speed
Selects whether skew is detected or not
detected.
17
18
Setting the “Detect Skew”
Scanning method
Detect Skew
Scan Method
Selection of documents to be scanned.
This includes documents placed in the ADF
and documents placed on the flatbed glass
(document glass).
Save scanning settings
(Select memory)
Selects the memory where the conditions are
saved into.
Save Setting
Save Setting
19
20
Save scanning settings
(Execution)
Saves the scanning conditions into the
memory. (2 memory settings)
Loads the memory where the scanning
conditions have already been saved. If
“Default” is selected, all of the scanning
conditions will return to the default values.
Load scanning setting
Load Setting
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
Counter menu
No.
Item
LCD
Content
Page
Select the counter
displayed on the
LCD.
Selection to choose to display the cleared counter
(scan counter) after scanning one time or to display the
user set counter (user counter) on the LCD.
01
Disp. Counter
Setting the User
Counter
User Counter
User Counter
User Counter
System Count.
Selection for default number before scanning
Selection for an increase in the default number
Clears the counter which was set by the user.
Setting the user
counter extender
27
02
03
Clear the user
counter.
Displays the total amount of scanned documents up to
now.
System Count
Imprinter menu
Depending on the setting on the “Counter setting menu”, the page number of the scanned document will be
printed. The imprint unit (KV-SS010) is required. If a host computer is connected, there may be settings required
on the host computer as well.
No.
Item
LCD
Content
Page
Allows for the selection of the printing content using an
imprinter.
The imprinter will print on the printing (front) side of the
document scanned.
Setting the
imprinter data
01
Pre Imprint
28
Setting the
imprinter position
Allows for the selection of the printing position using an
imprinter.
02
03
Pre Position
Pre Font
Setting the
imprinter font style
Alows for the selection of the printing font style using
an imprinter.
Setting the
imprinter
orientation
Allows for the selection of the printing orientation using
an imprinter.
04
Pre Rotate
29
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
Others menu
No.
Item
LCD
Content
Page
Displays the firmware version of the mechanical
control, pre-imprinter or post-imprinter.
If an optional imprinter is not installed, the imprinter
version will not be displayed.
01
Checking the version
Version
Selects whether the buzzer is turned on or off.
If selection is in the “ON” position:
When pressing a key, one short beep will be heard.
When there is an error, 5 short beep will be heard.
When scanning is completed correctly, one long beep
will be heard.
02
Setting the buzzer
Setting the SCSI ID
Buzzer
30
03
04
SCSI ID
Sets the SCSI ID No.
Set “Enable” or “Disable”.
“Enable”: If last device on chain
“Disable”: If between devices
Setting the terminator Terminator
• Changes the maximum value of the synchronous
transfer rate of the SCSI interface.
• Lower the synchronous transfer rate to 10 Mbytes/
sec. if the computer has failed to recognize the
scanner or the scanner fails to operate properly.
Setting the transfer
Transfer Rate
rate
05
06
The alarm tells you it is time to check roller.
If it is near 100%, clean the roller. See “Cleaning the
Unit” on page 44.
Checking the roller
Clean Roller
cleaning warning
Clearing the roller
Clean Roller
Clear the “Clean Roller Warning ≤≤%” display.
cleaning warning
The alarm tells you the roller needs to be changed.
If it is near 100%, replace the paper feed roller module
and retard roller module. See “Replacing Consumable”
on page 52.
31
Checking the roller
modules replacement Replace Roll.
warning
07
Clearing the roller
modules replacement Replace Roll.
warning
Clear the “Replace Roll. Warning ≤≤%” display.
Selects the product ID. The product ID setting depends
on the host computer scanner application you are
using.
08
09
Setting the product ID Product ID
32
Allows scanner to emulate other Panasonic scanner.
Setting the sleep
Sleep Mode
mode
Sets the time until sleep mode turns ON.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
¥ Operation
SCAN
COUNTER
OTHERS
1,4
4
MODE
READY/
ERROR
IMPRINT
HOME
SELECT
STOP/START
Menu keys
3
2
(ex. SCAN)
Press the menu key until the desired
menu is displayed.
1
0 1 . F . B r i g h t n e s s
D – – – – + – –
• The SCAN, COUNTER, IMPRINT and
OTHERS keys are used as a menu key.
• When pressing the SCAN key, the display
will appear as shown in the diagram on
the right.
– – L
H o s t
Use the
the desired item.
3
key or the
4
key to select
2
3
4
0 7 . B . C o n t r a s t
L – – – – + – –
– – H
H o s t
• The display at the right is an example of a
setting for the scanning setting mode.
Use the
the desired content.
1
key or the
2
key to select
0 7 . B . C o n t r a s t
L – – ✽ – + – –
– – H
L 2
• The display on the right is an example of
a setting for the back side contrast.
Press the HOME key to return to the
“Ready” display or another menu key
to go to another menu.
When the HOME key is pressed :
R e a d y
When the COUNTER key is pressed for another menu key :
0 1 . D i s p . C o u n t e r
S c a n
§ In steps 2 or 3, you can change to the desired menu by pressing the desired menu key.
§ For changing the display language, see page 16.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
¥ Actual settings
Scan setting menu (by pressing the SCAN key)
Contents
Number, mode and default display
• Pressing the
mode.
• Pressing the
previous mode.
3
key will change to the next
• Pressing the
value.
1
key or the
2 key will change to another
4
key will change to the
01 Front side brightness
D4
D3
D2
D1
Norm L1
Host
L2
L3
L4
0 1 . F . B r i g h t n e s s
D s s s s r s s s s L
H o s t
• When “Host” is displayed, pressing the
will change the display to “Norm”.
• “D” means dark. “L” means light.
1
key or the
2
key
02 Front side image emphasis
Smooth
None
Low
Medium High
Host
0 2 . F . E m p h a s
i
s
s s s r s
H o s t
• When “Host” is displayed, pressing the
will change the display to “Medium”.
1
key or the
2
H4
2
key
03 Front side contrast
L4
L3
L2
L1
Norm H1 H2
Host
H3
0 3 . F . C o n t r a s t
L s s s s r s s s s H
H o s t
• When “Host” is displayed, pressing the
will change the display to “Norm”.
• “H” means high. “L” means low.
1
key or the
key
• For changing the display language, see page 16.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
04 Front side halftone
Host
Binary
Bayer dither 64
Bayer dither 16
Error diffusion
0 4 . F . H a l
f
t o n e
H o s t
Halftone dot 32 Halftone dot 64
1
§
(Dynamic Th.)
1
§ The dynamic threshold is not displayed if the DIMM
expansion memory module has not been installed. If the
dynamic threshold is to be used, install a DIMM memory
module which is available on the market. For details on
how to install it refer to the installation manual.
05 Back side dropout color
Color selection
0 5 . B . C o l o r
d r o p
H o s t
Host
Red
Green
D1
• KV-S6055W series only.
06 Back side brightness
D4
D3
D2
Norm L1
Host
L2
L3
L4
0 6 . B . B r i g h t n e s s
D s s s s r s s s s L
H o s t
• KV-S6055W series only.
• When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
• “D” means dark. “L” means light.
07 Back side image emphasis
Smooth
None
Low
Medium High
Host
0 7 . B . E m p h a s
i
s
s s s r s
H o s t
• KV-S6055W series only.
• When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Medium”.
08 Back side contrast
L4
L3
L2
L1
Norm H1 H2
Host
H3
H4
0 8 . B . C o n t r a s t
L s s s s r s s s s H
H o s t
• KV-S6055W series only.
• When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
• “H” means high. “L” means low.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
09 Back side halftone
Host
Binary
Bayer dither 64
Bayer dither 16
Error diffusion
0 9 . B . H a l
f
t o n e
H o s t
Halftone dot 32 Halftone dot 64
1
§
(Dynamic Th.)
• KV-S6055W series only.
1
§ The dynamic threshold is not displayed if the DIMM
expansion memory module has not been installed. If the
dynamic threshold is to be used, install a DIMM memory
module which is available on the market. For details on how
to install it refer to the installation manual.
10 Noise reduction
Host
None B1✕1 B2✕2
B3✕3
1 0 . N o i s e
R e d u c t
.
r s s s s s s
H o s t
B4✕4 B5✕5
B6✕6
W1✕1 W2✕2
W3✕3 W4✕4
W5✕5 W6✕6
B1
a
1TB6
a
6 : Scanner reduces a black dot.
W1
a
1TW6
a
6 : Scanner reduces a white dot.
11 Black line removal
Host
Disable
Enable
1 1 . B L K
L i n e
R e m o v e
H o s t
• This setting is valid only when the white roller kit is installed.
Host Fit to Page Actual
12 Scanning mode
1 2 . S c a n
M o d e
H o s t
n i n g
Fit to Page : Scanner shrinks image to fit scanned page.
Actual
:
Scanner scans at 100% actual page size.
Some of the data on the edges of the page may be
lost.
13 Double feed detection
Host
Not detect
Detect
1 3 . D o u b l e
F e e d
H o s t
If set to “Detect”, the scanner will sound a buzzer and the power
indicator will flash red when double feeding is detected. Even if
this buzzer is set to “OFF” in “Setting the buzzer” (see page 30),
it will still ring.
• When scanning very important documents, confirm if the
number of scanned pages displayed on the LCD matches the
number of actual pages.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
14 Setting the “Double Feed” detector
action
Host
Stop
Buzzer
1 4 . D o u b l e
A c t i o n
F e e d
H o s t
Host : The scanner will act in response to commands from
the host computer.
Stop : The scanner will display double feed error and stop
when it detects double feeding.
Buzzer : When the scanner detects double feeding, it will
sound a buzzer, the power indicator will light red and
it will continue scanning.
After completing scanning, the scanner will display
double feeding warning.
15 Setting the “Double Feed” detector
sensitivity
Sens. Host Low sensitivity
1 5 . D o u b l e
F e e d
H o s t
Normal Sens. High sensitivity
S e n s .
Low sensitivity : The double feed detector’s sensitivity will be
low. Set this when there is an error for no
double feeding.
High sensitivity : The double feed detector’s sensitivity will be
high. Set this when there is no error for
double feeding.
16 Feed speed
Host
Slow
Normal Fast
1 6 . F e e d
S p e e d
H o s t
Fast : The scanner scans approximately 1.3 times faster
than when “Normal” is set, at a resolution ranging
from 200dpi to 400dpi. For example, when the
resolution is 200dpi, the scanner scans at 200dpi a
150dpi, but outputs the image at 200dpi a 200dpi.
However, the image quality produced by “Fast” is
inferior to the image quality produced by “Normal”.
Slow : The scanner scans at half of the “Normal” speed.
17 Setting the “Detect Skew”
Host
Not detect
Detect
1 7 . D e t e c
t
S k e w
H o s t
Detect
: If the document is not moving straight, scanning
will stop and “U20 Skew Error” will be displayed.
Not detect : The document will be scanned even if it is not
moving straight.
• When scanning very important documents, confirm if the number of scanned pages displayed on the LCD
matches the number of actual pages.
• Thick, creased, or edited documents with correction fluid as well as documents with holes near the center may
give you false double feed warning.
• When scanning a document which is shorter than 210 mm/8.3" (A5 size) in length, double feed detection will
not work well.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
18 Scanning method
Host
FB
1 8 . S c a n
M e t h o d
H o s t
Host : The documents placed either on the ADF or on the
flatbed are scanned in response to commands from
the host computer.
FB
: The documents placed on the flatbed are scanned.
19 Save “Scanning Settings”
(Select memory)
Memory 1 Memory 2
1 9 . S a v e
S e t
t
i n g
M e m o r y
1
19 Save “Scanning Settings”
(Execution)
When pressing the
1
key and the
2
key simultaneously, the
scanning conditions set in 01 to 18 above will be saved in the
memory selected in the “Save Scanning Settings (Select
memory)”.
1 9 . S a v e
S e t
t
i n g
E x e c l
“Completed” will be displayed after saving.
20 Load scanning setting
Default
Memory 1 Memory 2
key or the key to select Memory 1 or
2 0 . L o a d
S e t
t
i n g
D e f a u l
t
• If you use the
1
2
Memory 2, the saved scanning items will become valid by
the “Save Scanning Settings (Execution)”.
If other scanning items have been saved in another memory,
during scanning you can change the scanning items easily.
This setting will not be changed even if the power is turned
off and on, and will remain valid.
• If “Default” is selected, all of the saved scanning settings will
return to the default values. (See “01” to “18” of the left side
display.)
• Scanning settings 01-18 must be saved using setting “19 Save Scanning Settings (Execution)”.
Even if they are not saved, they will be applied. If the power is turned off, the next time the unit is used they will
not be applied.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
Counter setting menu (by pressing the COUNTER key)
Number, mode and default display
Contents
• Pressing the
next mode.
3
key will change to the • Pressing the
1
key or the
2
key will change to another value.
• Pressing the
4
key will change to the
previous mode.
01 Select the counter displayed on the
LCD
Scan User
0 1 . D i s p . C o u n t e r
Scan : After scanning one time, the scanner counter will be
cleared.
S c a n
User : This counter is set to the default value.
The user counter extender is also set by the user.
They will be cleared when the power is turned OFF.
02 Setting the user counter
Pressing the
Pressing the
Pressing the
1
2
1
key once will increase the user counter by one.
key once will decrease the user counter by one.
0 2 . U s e r
C o u n t e r
key or the
2
key continuously will change the
0
user counter value by increments of 10.
02 Setting the “User Counter
Extender”
......
r7 r8
r1 r2 r3
r9
0 2 . U s e r
C o u n t e r
Pressing the
1
key once will increase the user counter extender
+ 1
by one. Pressing the
extender by one.
2
key once will decrease the user counter
02 Clear the “User Counter”
When pressing the
1
key and the
2
key simultaneously, the
user counter will be cleared.
Then “Completed” will be displayed.
0 2 . U s e r
C o u n t e r
C l e a r l
03 Displaying the system counter
Displays the total amount of scanned documents up to now.
0 3 . S y s t e m
C o u n t
.
1 2 3 4 5 6 7
(ex.)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
Imprinter setting menu (by pressing the IMPRINT key)
These setting can be done only when a imprinter unit is installed.
.
Contents
key or the key will change to another
Number, item and default display
• Pressing the
value.
1
2
• Pressing the
next mode.
3
key will change to the
• Pressing the
4
key will change to the
previous mode.
01 Setting the imprinter data
Host
Count
0 1 . P r e
I m p r i n t
H o s t
Host : Printing will be done according to the host computer.
Count : Printing will be done according to the counter in the
“Select the counter displayed on the LCD”.
• This setting can be done only when a
imprinter is installed.
02 Setting the imprinter position
By pressing the
1
key or the
2
key, you can specify the line
where printing starts from the top of the document.
If “0” character is set, printing starts from 10.0 mm.
The millimeter value displayed is an approximation.
0 2 . P r e
P o s
i
t
i o n
H o s t
0 2 . P r e
<
P o s i t i o n
1 C h a r >
1 2 . 4 m m
• This setting can be done only when a
imprinter is installed.
The length per character varies, depending on the 04
orientation setting.
90°or 270°: 2.40mm per character
0°or 180°: 3.46mm per character
Character: 0 - 72
• In this example, printing starts at 12.4 mm (approx, 1/2 in.)
from the top of the paper. The number 12.4 can be changed
from 10.0 to 182.8 by pressing the
1
key or the
2
key.
Top of the paper
Top of the paper
10mm (Default)
Approx.
13/32 in.
12.4mm
Approx.
1/2 in.
Top of the
printout
Top of the
printout
03 Setting the imprinter font style
Host
Bold :
Bold
Normal
0 3 . P r e
F o n t
H o s t
2-dot font
Normal: 1-dot font that can increase the ink lifetime longer than
Bold fonts
• This setting can be done only when a
imprinter is installed.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
04 Setting the imprinter orientation
90o
Host
0o
270o
180o
0 4 . P r e
R o t a t e
H o s t
:Transfer direction
A
B
0x
Prints portrait orientation.
• This setting can be done only when an
imprinter is installed.
Rotates character string 90 degrees and prints.
90x
B
A
Prints portrait orientation from the end of
the character string.
180x
270x
Rotates character string 270 degrees and prints.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
“Others”setting menu (by pressing the OTHERS key)
Number, mode and default display
Contents
key or the key will change to another value.
• Pressing the
next mode.
3
key will change to the
• Pressing the
1
2
• Pressing the
4
key will change to the
previous mode.
01 Checking the Version
MX.XX : Displays the mechanical control firmware version.
FX.XX : Displays the imprinter firmware version.
If an imprinter unit is not installed, the firmware version
will not be displayed.
0 1 . V e r s i o n
M X . X X F X . X X
02 Setting the “Buzzer”
ON
OFF
0 2 . B u z z e r
O N
03 Setting the SCSI ID
4
5
6
7
1
2
3
0
0 3 . S C S I
I D
N o . 6
• Setting the SCSI ID will be activated after turning the power off
and turning it on again.
04 Setting the “Terminator”
Enable
Disable
0 4 . T e r m i n a t o r
E n a b l e
When the scanner is located to terminal position on SCSI bus,
set to “Enable”.
• Setting the terminator will be activated after turning the power
off and turning it on again.
• The internal terminator works only when the units power has
been turned on. If the PC is to be used while the unit’s power is
off, be absolutely sure to install an external terminator which is
available on the market.
05 Setting the transfer rate
20MByte/sec 10MByte/sec
0 5 . T r a n s f e r
R a t e
2 0 M B y t e / s e c
• Changes the maximum value of the synchronous transfer rate
of the SCSI interface.
• Lower the synchronous transfer rate to 10 Mbytes/sec. if the
computer has failed to recognize the scanner or the scanner
fails to operate properly.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
06 Checking the “Roller Cleaning
Warning”
0% : This is displayed when “Clean Roller Warning ≤≤%”
displayed is cleared.
100% : This is displayed when the roller needs to be cleaned.
0 6 . C l e a n
W a r n i n g
R o l l e r
0 %
06 Clearing the “Roller Cleaning
Warning”
When pressing the
“Clean Roller Warning” will be cleared. Then “Completed” will be
displayed.
1
key and the
2
key simultaneously,
0 6 . C l e a n
W a r n i n g
R o l l e r
C l e a r = < >
07 Checking the roller modules
replacement warning
0% : This is displayed when “Replace Roll. Warning ≤≤%”
displayed is cleared.
100% : This is displayed when the roller modules need to be
replaced.
0 7 . R e p l a c e
W a r n i n g
R o l
l
.
0 %
07 Clearing the roller modules
replacement warning
When pressing the
“Replace Roll. Warning” will be cleared. Then “Completed” will
be displayed.
1
key and the
2
key simultaneously,
0 7 . R e p l a c e
R o l
l
.
W a r n i n g C l e a r = < >
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
08 Setting the “Product ID”
• KV-S6055W series
0 8 . P r o d u c t
I D
KV-S6045
KV-S6040
KV-S6055 KV-SS855
KV-S2065
KV-S2055
KV-S2055
K V - S 6 0 5 5
• KV-S6050W series
KV-S6050 KV-SS855
KV-S2065
The applications for the scanner which have been set can be
used.
• An error results if an attempt is made to use a function which
are not provided with the KV-S6050W or KV-S6055W series of
scanners.
• No guarantees are given for complete compatibility.
09 Setting the sleep mode
After 1 min. T After 60 min. Disable
0 9 . S l e e p
A f t e r
M o d e
1 5 m i n .
• 1min. T 60min.
• To return from the sleep mode, press any key on the scanner or
issue the scan instruction from the application.
To conserve energy and operating cost,
this scanner is provided with
a
programmable power save feature. The
scanner is factory set with the power save
feature (sleep mode) turned on to comply
with ENERGY STAR® requirement. If sleep
mode is enabled, the scanner enters the
sleep mode when the scanner is idle for
15 minutes.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Instructions
¥ Other display explanations
Display
Content
This will be displayed when scanning is started until it is
completed.
After completion, “Ready” will be displayed.
S c a n n i n g .
.
.
.
1
!
If the STOP key is pressed, scanning will stop. This will be
displayed when the STOP key is pressed during scanning.
Even if the STOP key is pressed in a setting mode, this will be
displayed. Then the scanner will return to setting mode after
stopping scanner operation.
S t o p p i n g .
. W a i
t
This will be displayed when the STOP key is pressed and the
scanner stops.
Even if the document remains in the scanner, “JAM” will not be
displayed.
S c a n n e r
S t o p p e d
1 2 3 4 5 6
If the document remains in the scanner, open the ADF door
and the front door, then remove it.
Then “Ready” will be displayed.
This will be displayed after setting scanning to start with a host
computer.
P r e s s
S T A R T
K e y
If the document is set and the START key is pressed, scanning
will start.
This is displayed in the sleep mode.
To return from the sleep mode, press any key on the scanner
or issue the scan instruction from the application.
S l e e p
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents on the ADF
To prevent double feeding, separate
any documents which have been
stapled together or stacked, as in a file,
before setting in the scanner.
Prior to scanning, remove, all staples and paper clips
from pages.
1
1 Fan the stack of documents to
separate all of the edges.
2 Hold both ends of the document and
bend them as shown to the right.
3 To separate the document apart,
grasp them firmly and pull them so
that the center part waves as shown
to the right.
1
Repeat the steps above as necessary.
2
3
Carefully align the top left ends of the
documents.
2
3
Align the left
side of the
documents
Align the top of the documents
Adjust the document guide slightly
larger than the actual size of the
document.
Document guide
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents on the ADF
Place the documents on the hopper
with the side to be scanned facing up.
Then push them in the direction of the
arrow until they stop.
Portrait
4
• Place the documents on the hopper by
matching them with the left side of the
hopper as shown in the diagrams at the
right.
The amount of documents should not
exceed the limit mark on the document
guide. This may cause a paper jam or
skew.
Fill indicator
(Limit mark)
• For different sized documents, place
them with the top left ends facing the left
side of the hopper.
Landscape
Adjust the document guide to the size
of the document to be scanned.
Adjust the exit document stopper to
the size of the document to be output.
5
Document guide
Exit document stopper
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents on the ADF
When using long paper, pull out the
hopper extension tray from the hopper
and the exit document stopper from
the document cover.
Hopper
6
Hopper extension
tray
Then adjust the exit document stopper
above the document cover a little
longer than the actual length of the
document by pressing down the exit
document stopper slightly. (See fig. 1.)
Document
cover
• When scanning narrow documents as
shown below, pull up the exit substopper.
(See fig. 2.)
After using the exit substopper, push
down it.
Exit document stopper
Fig. 1
Scanning direction
Document
Exit substopper
Fig. 2
Cautions:
• For thin, thick or important paper, scan the document with the flatbed side or using single sheet (manual feed )
mode (see page 40). Also, remove the document from the document cover after it is scanned by the ADF.
2
2
• The scanner will accept 50 to 127 g/m (13 to 34 lbs.) paper for continuous scanning and 40 to 127 g/m (10.6
to 34 lbs.) paper for single scanning.
• When scanning a thin, folded, creased or curled document by the ADF, after straightening the document, set
the feed speed to “Slow”.
2
• When scanning thick documents [64 g/m (17 lbs.) or more], be sure to use less than 200 sheets.
• When scanning copying paper such as carbon or carbonless paper, use the flatbed.
• When setting the document, be sure that it does not exceed the fill indicator (limit mark).
• Be sure to remove the document from the document cover after it is scanned.
• When the scanner does not detect a document set in the hopper which has a black or dark area on the
opposite side, add a white sheet of paper under the document.
• When scanning the different sized documents, exited document may go into the stack of documents on the exit
part and may get out of order.
Types of documents to avoid for the ADF:
• OHP sheets, other plastic film, cloth, or metallic sheets
• Paper with irregularities such as tabs, staples, paste, etc.
• Documents with wet ink
• Thick or irregular documents such as envelopes, paste, etc.
• Copying paper such as carbon paper
• Damaged or wrinkled documents
• Irregular shaped documents
• Tracing paper
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents on the Flatbed
One sheet or an entire book document can be scanned on the document glass.
Scanning documents in this way is known as “scanning with the flatbed”.
∫
When scanning with the flatbed one time
Open the document cover.
1
Document cover
Place the scanning side of the
document face down on top of the
document glass.
2
• If the document is bent or folded,
straighten it.
Document
Match the shorter side of the
document with the left edge of the
document glass.
3
4
Standard mark
Match the longer side of the document
with the standard mark.
Longer side
• If the document is slanted, it will not be
scanned properly.
Shorter side
Standard mark
Document
Document glass
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents on the Flatbed
Close the document cover gently.
5
• If the document cover is slammed, the
document will move and may not be
scanned properly.
• Do not open or press down on the
document cover during scanning.
• Do not look directly at the light.
(You may damage your eyes.)
• Be sure to close the document cover
before use.
• After scanning, open the document cover
and remove the document.
∫
When scanning with the flatbed repeatedly
The ADF is heavy so when scanning with the flatbed repeatedly, separate the ADF and document cover.
Pull the exit document stopper towards
you, pull the front door release under
the hopper, separate the ADF and
1
ADF
document cover, and lift up the ADF to
open.
Hopper
Front door release
ADF
Perform operation steps 1 through 5
for scanning with the flatbed one time.
(See pages 37 and 38.)
2
Front door release
(Inside the front door.)
Document cover
Exit document stopper
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents on the Flatbed
After scanning, close the document
cover gently.
3
4
Close the ADF gently.
• Push down on both sides of the ADF
gently until it clicks into place.
• Do not close the ADF holding the hopper
extension tray.
Hopper extension tray
∫
Scanning thick documents
When scanning thick documents such as a book, please note the following items:
• The operation methods when scanning thick document, such as a book, with the flatbed one time and
repeatedly are the same.
• Do not close the document cover forcibly.You may scan with the document cover open.
In this case, do not look directly at the light.
• Please note that areas of the document which are not touching the document glass will not be scanned
properly.
• If the document moves during scanning, please note that it will not be scanned properly.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Feeding a Document Manually
When scanning a document with multiple pages with the ADF, set the manual feed selector to “MANUAL” and the
pages can be scanned one page at a time.
Set the manual feed selector to
“MANUAL”.
1
• The hopper will then be raised to the
proper level for manual feeding.
Manual feed
selector
Match the document guide with the
Document guide
size of the document.
2
Insert the document into the paper slot
one page at a time.
3
Paper slot
Cautions :
• Please remove any staples from the document before scanning.
• Glued or curled documents may cause a paper jam or damage the unit, so please scan using the flatbed.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
∫
How to use the control sheet
If the control sheet is used, the documents
under the control sheet are scanned in
accordance with the code on the control
sheet regardless of scanning condition that
is selected previously.
Documents
Code
A
Control sheet
• Multiple control sheets can be used.
• When using a control sheet, the application
software required depends on the control sheet.
• Print out control sheets from the provided CD-
ROM.
Documents
B
Caution
• Use the same size control sheet as the scanning
document.
• When printing the control sheet, if the pattern
falls in the area from the top side of the
document to 25 mm, adjust the printer.
Also, copy the control sheet so that the pattern
lies in the center of the copy.
• Be careful not to get the control sheet dirty.
Do not fold or crease the control sheet.
Scanning will not be performed properly.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
Torn documents, thin documents or documents that are creased on the top edge may cause paper jams. If a paper
jam occurs (“U xx JAM” will be displayed on the LCD), remove the jammed sheet according to the following
procedure.
∫
Removing paper jams from the feed part
Using your hand, hold down the ADF door
release towards you. Open the ADF door
and pull the jammed document towards the
feed part, and then close the ADF door.
ADF door
ADF door
• Push both sides of the ADF door down gently
until it clicks into place.
• Since the roller are located on the left side of the
ADF door, there is more weight on the left side.
Therefore, it is important to note that the door
needs to have tension evenly divided to close it
properly.
ADF door release
ADF door release
(Inside the ADF door.)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
∫
Removing paper jams from the exit path
If a jammed document appears at the exit
part, pull the exit document stopper towards
you, open the front door and pull the
document forward, then close the front door.
Front door
• Push both sides of the front door down gently
until it clicks into place.
• Do not close the front door holding the hopper
extension tray.
Front door
release
Front door
Front door release
(Inside the front door.)
Exit document stopper
Hopper extension
tray
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
∫
Outside of the scanner
Clean the unit at least once a month.
Turn the power off.
1
Clean the cover with a soft cloth.
2
• The ADF insertion and exit slots get dirty
easily, therefore, proper cleaning is
required.
Power switch
Remove dirt and dust from the fan
exhaust vent with a brush.
3
≤ : Off position
∫
∫
Inside the scanner
Clean the unit described below at least once a week or when 50,000 sheets have been scanned, whichever
comes first.
• Clean the rollers, all document sensors, double feed detection sensors and paper detection sensor if paper
jamming or double feeding occurs frequently.
• Clean the scanning section glass, CIS glass, sensor plate and sensor roller when black or white lines appear on
the scanned images. NOTE : There is no CIS glass and no sensor roller for the KV-S6050W / KV-S6050WU.
• If the documents that will be scanned are dirty, then the scanner parts may become dirty as well.
To maintain proper scanning, clean the scanner parts frequently.
• When scanning with the flatbed and black dots or white patches occur, open the document cover, and clean the
document glass and cover sheet (black sheet) using the accessory roller cleaning paper.
Cleaning the rollers
Turn the power off.
ADF door
1
2
Using your hand, pull the ADF door
release towards you, then open the
ADF door completely.
ADF door
ADF door release
ADF door release
(Inside the ADF door.)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Use the accessory roller cleaning
paper (KV-SS03) to remove the dirt
• The rollers to be cleaned are shaded.
• Wipe in the direction of the arrows.
3
from the surfaces of all rollers.
• When wiping off the dirt, hold the rollers
to prevent them from rotating. Wipe the
rollers completely from one end to the
other. Be sure to wipe in the directions of
the arrows shown on the diagram to the
right.
Retard roller
Retard roller
• Clean the retard roller only in the
directions of the arrow shown on the
diagram to the right. If cleaned in the
wrong direction, the roller may slip out of
the proper position.
Conveyor rollers
Paper feed rollers
Rollers
Separation roller
Other roller except retard roller
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Pull the exit document stopper
Front door
4
towards you and use your hand to pull
the front door release towards you.
Then open the front door completely.
Front door
Front door release
Front door release
(Inside the front door )
Exit document stopper
Use the accessory roller cleaning
paper (KV-SS03) to remove the dirt
from the surfaces of all rollers.
•The rollers to be cleaned are shaded.
•Wipe in the direction of the arrows.
5
• When wiping off the dirt, hold the rollers
to prevent them from rotating. Wipe the
rollers completely from one end to the
other. Be sure to wipe in the directions of
the arrows shown on the diagram to the
right.
Conveyor rollers
Sensor roller
Rollers
Close the front door.
6
• Push both sides of the front door down
gently until it clicks into place.
• Do not close the front door holding the
hopper extension tray.
Hopper extension
tray
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Close the ADF door.
7
• Push both sides of the ADF door down
gently until it clicks into place.
• Since the roller are located on the left
side of the ADF door, there is more
weight on the left side.
Therefore, it is important to note that the
door needs to have tension evenly
divided to close it properly.
∫
Cleaning the scanning section glass, CIS glass, sensor plate, sensor roller,
document sensors, double feed detection sensors and paper detection
sensor
Turn the power off.
1
Using your hand, pull the ADF door
release towards you, then open the
ADF door completely.
2
ADF door
ADF door release
ADF door
ADF door release
(Inside the ADF door.)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Remove the dirt on the document
3
sensors, double feed detection sensors
and paper detection sensor using the
included blower.
Paper detection sensor
Double feed
detection sensor
Document sensors
Double feed
detection sensor
¥
How to clean the document sensor,
double feed detection sensor or paper
detection sensor
Remove the brush and blow
off the dirt through the document
sensor hole, double feed
detection sensor hole or
paper detection sensor hole.
Blower
Document sensor, double
feed detection sensor or
paper detection sensor
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Pull the exit document stopper
towards you, using your hand, pull the
front door release towards you, then
open the front door completely.
Front door
4
5
Front door
Front door release
Front door release
(Inside the front door )
Exit document stopper
Clean the scanning section glass, CIS
glass, sensor plate and sensor roller
using the accessory roller cleaning
paper (KV-SS03).
Also, remove the dirt on the document
sensors using the included blower.
Document sensors
CIS glass
Sensor plate
Scanning
section glass
• If the sensor roller is removed while
cleaning, re-attach it after cleaning.
• There is no CIS glass and no sensor
roller for the KV-S6050W/KV-S6050WU.
Sensor roller
¥ How to clean the document sensor
Remove the brush and blow off
the dirt through the document
sensor hole or directly.
Blower
Document sensor
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Close the front door.
6
• Push both sides of the front door down
gently until it clicks into place.
• Do not close the front door holding the
hopper extension tray.
Hopper
extension tray
Close the ADF door.
7
• Push both sides of the ADF door down
gently until it clicks into place.
• Since the roller are located on the left
side of the ADF door, there is more
weight on the left side.
Therefore, it is important to note that the
door needs to have tension evenly
divided to close it properly.
• After cleaning, clear the “Clean Roller
Warning” display. (See page 31.)
¥ Re-attachment of the sensor roller
When the sensor roller is removed while cleaning the inside of the scanner, re-attach it as shown below.
Lower sensor roller:
Attach the roller by placing the no-gear side
to the left side of the scanner and inserting
Flat side of the bearing
Bearing
both side’s bearings into the guide grooves.
• Match the flat side of the bearing with the flat
side of the guide groove.
Sensor roller
• After attaching, press down on top of the sensor
roller with your finger to confirm if it moves or
not.
Guide groove
Please attach the right side bearing in the same way.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
∫
Document glass and cover sheet
Open the document cover.
1
(See step 1 on page 37.)
Clean the document glass and cover
sheet (black sheet) using the
accessory roller cleaning paper
(KV-SS03).
2
Cover sheet
Document glass
Close the document cover gently.
(See step 5 on page 38.)
3
∫
Roller cleaning paper
Open the bag on the dotted line and take out
the roller cleaning paper.
• If the roller cleaning paper bag is left open for a
long period of time before using it, the alcohol
will evaporate. Please use the roller cleaning
paper immediately after opening the bag.
Dotted line
§ The roller cleaning paper (Model No. KV-SS03) is available from the dealer where you
purchased your scanner.
For supplies and accessories: Call 1-800-346-4768 (U. S. A. only) or your dealer.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumable Roller Modules
If “Warning Replace Roller” message is displayed on the LCD, replace the paper feed roller module, separation
roller module and retard roller module at the same time.
Confirm that the manual feed selector
1
is set to “AUTO”, turn the power off and
unplug the power cord.
• If the power is turned off with the manual
feed selector set to “MANUAL”, the retard
roller module cannot be removed.
Power switch
≤ : Off position
Using your hand, pull the ADF door
release towards you, then open the
ADF door completely.
ADF door
2
ADF door
ADF door release
ADF door release
(Inside the ADF door.)
Using your fingers, hold the paper feed
conveyor and pull it towards you to
open it.
3
Paper feed
conveyor
• When the paper feed conveyor is pulled
towards you, the click-stop mechanism
will be released.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumable Roller Modules
Remove the paper feed conveyor by
first lifting it slightly and then pulling it
toward you.
4
5
• Do not apply any force or weight to the
paper feed conveyor since doing so may
bend it out of shape.
Paper feed
conveyor
Hold the paper feed roller module gear
and pull the gear side in the direction
of arrow 1. Now slide the gear side in
the direction of arrow 2.
Paper feed roller module
Next, hold the separation roller module
gear and pull the gear side in the
direction of arrow 1, and then slide it
in the direction of arrow 2 to remove
it.
1
1
Separation roller
module
2
2
Paper feed
roller module
Separation
roller module
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumable Roller Modules
Open the optional “Roller Exchange
Kit (KV-SS044)”, and take out the
paper feed roller module and
separation roller module.
6
For supplies and accessories:
Call 1-800-346-4768 (U.S.A. only) or
your dealer.
Install the new paper feed roller
module and separation roller module
with the gears on the left side and the
post-gear side bearing slide into the
right side guide grooves of the chassis
in the scanner. (1)
7
1
1
Then push up the gear side bearings
and install into the left side guide
grooves of the chassis in the scanner.
When installing the second one, it
clicks into place. (2)
• Match the paper feed roller module and
separation roller module with the
bearings and guide grooves, and then
attach them.
When attaching the paper feed roller
module and separation roller module,
push each bearing in the direction of the
arrow
and attach.
• When attaching the paper feed roller
module and separation roller module to
the chassis, do not damage the rollers.
2
2
Bearings
Bearing
Chassis
Bearing
Chassis
Chassises
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumable Roller Modules
Tilt the paper feed conveyor at a slight
angle pointing downward and attach it
as shown in the diagram to the right.
8
Hook
Pin
Please attach the left side hook in the same way.
Close the paper feed conveyor.
9
• Push up the paper feed conveyor until it
clicks into place.
• You are now finished attaching the paper
feed roller module and separation roller
module.
To continue, replace the retard roller
module according to the following
procedure. (The retard roller module is
located in the conveyor.)
Paper feed
conveyor
Using your fingers, hold the conveyor
and pull it towards you to open it.
10
Retard roller module
• When the conveyor is pulled towards you,
the click-stop mechanism will be
released.
Document guide
Conveyor
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumable Roller Modules
Pull the right side of the shaft in the
direction of arrow (1), and hold it
there.
11
Retard roller module
2
Pull the retard roller module in the
direction of arrow (2), and then
remove it.
1
Shaft
Take out the retard roller module in the
optional “Roller Exchange Kit
(KV-SS044)”.
12
For supplies and accessories:
Call 1-800-346-4768 (U.S.A. only) or
your dealer.
Pull the right side of the shaft in the
direction of arrow (1) and hold it
there.
Retard roller module
13
Attach the new retard roller module as
shown in the direction of arrow (2).
Return the right side of the shaft as
shown in the direction of arrow (3).
1
• Confirm if pin A and pin B are inserted in
their notches correctly.
Shaft
• Attach the retard roller module so that the
notch A is on the left side.
3
2
Pin B
Notch A
Pin A
Notch B
When the pin is not inserted in the notch properly,
it may cause double feeding or a paper jam.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumable Roller Modules
Close the conveyor by pushing it into
the unit.
• When the conveyor is closed, the click-
stop mechanism will operate.
• If the conveyor is not closed correctly
and the operation in step 15 is done, the
conveyor may break.
14
15
Conveyor
Close the ADF door.
Before closing the ADF door, confirm
that the conveyor is closed correctly.
If it is not, the conveyor may break.
• Push both sides of the ADF door down
gently until it clicks into place.
• Since the roller are located on the left
side of the ADF door, there is more
weight on the left side.
Therefore, it is important to note that the
door needs to have tension evenly
divided to close it properly.
• After replacing roller modules, clear the
“Replace Roll. Warning” display.
(Refer to page 31.)
Conveyor
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Repacking Instructions
It is highly recommended that you keep the original carton and ALL packing materials. lf you need to transport or
ship your scanner, please follow these instructions.
Please Note :
• Please use the original carton and all of the original packing materials. If you do not have the original packing
materials, these are available from your Panasonic dealer. Please refer to your service dealer, or call 1-800-833-
9626 (U.S.A. only) or your dealer.
• Improper repacking of the scanner may result in a service charge to repair the unit.
• The scanner should be handled in the correct (horizontal) position.
Materials Required :
• Original Scanner Carton & Packing Materials
• Shipping Tape and Scissors
Disconnect your scanner from the electrical outlet and the interface cable.
1
2
Fix the optical unit of the flatbed and attach the protective sheets with tapes.
• Please refer to the installation manual enclosed with the unit.
• Turn the power on and complete initializing (return the optical unit to
the original position), then attach the metal clamp at position A .
A
Pack the scanner.
B
3
Blower
Power cord
KV-S6050W/KV-S6055W
(1 piece)
KV-S6050WU/KV-S6055WU
(2 pieces)
CD-ROM
(Operating instructions)
(Driver software)
Installation manual
Maintenance manual
Roller cleaning paper
(3 pieces)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model No.
KV-S6050W
KV-S6055W
Item
Scanning face
Simplex scanning
Duplex scanning
ADF front side/Flatbed :
CCD image sensor
ADF back side :
Scanning method
CCD image sensor
CIS (Contact Type Image Sensor)
Flatbed
ADF
1.5 sec (1 paper, letter size, 200 dpi)
Simplex scanning :
Approx. 56 sheets/min. (Letter, fed lengthwise, 200 dpi)
Approx. 53 sheets/min. (A4, fed lengthwise, 200 dpi)
Duplex scanning (KV-S6055W only) :
Readout speed
Resolution
Approx. 46 sheets/min. (Letter, fed lengthwise, 200 dpi)
Approx. 45 sheets/min. (A4, fed lengthwise, 200 dpi)
Main scanning direction : 100 T 600dpi (1 dpi step)
Sub-scanning direction : 100 T 600dpi (1 dpi step)
The optical resolution is 400 dpi.
Flatbed/ADF
Binary mode, Grayscale mode (4/8 bit), 64-step gradation
(dither) mode, 64-step gradation (error diffusion) mode
Tonal gradation
Scanner
Image emphasis, Dynamic threshold (DIMM required),
Automatic threshold, Automatic separation, Monochrome
reversing, Automatic back control
Image control
Size for Flatbed
Size for ADF
T 298a432mm (11.7 a17 in.)
Scanning size :
70a169mm (2.8a6.7 in.), and
106a148mm (4.2a5.8 in.) to 298a432mm (11.7a17 in.)
Feeding size :
70 a169mm (2.8a6.7 in.), and
106a148mm (4.2a5.8 in.) to 305 a432mm (12a17 in.)
Paper
Single paper feeding
: 0.05 to 0.15mm (2.0 to 5.9 mils)
Thickness for ADF
Weight for ADF
Continuous paper feeding : 0.06 to 0.15mm (2.4 to 5.9 mils)
Note : 1 mil=1/1000 in.
2
Single paper feeding
: 40 to 127 g/m (10.6 to 34 lbs.)
2
Continuous paper feeding : 50 to 127 g/m (13 to 34 lbs.)
2
Hopper capacity
200 sheets [64 g/m (17 lbs.), un used paper]
a
a
a
a
External dimensions (WidthaDepthaHeight) 464 717 296mm (18.3 28.2 11.7 in.)
Mass (Weight)
30kg (66 lbs.)
Power requirement
AC100 - 120V, 50/60Hz
Unit
Maximum (Scanning) 1.8A
Power consumption
Minimum (Standby)
Sleep mode
0.5A
0.13A
Operating
Operating temperature and humidity
Storage temperature and humidity
15°C to 30°C (59°F to 86°F), 30% to 80%RH
0°C to 35°C (32°F to 95°F), 10% to 80%RH
Environment
Storage
Environment
Roller exchange kit (KV-SS044), lmprinter unit (KV-SS010), Red lamp option (KV-SS045),
Roller cleaning paper (KV-SS03), Ink cartridge (KV-SS06), White roller kit (KV-SS049)
Option
• “Weight in pounds” of paper represents the weight of 500 [ 432a559mm (17a22 inches)] sheets.
• The red lamp option (KV-SS045) must be installed by a trained service engineer. Consult your dealer.
• If the red lamp is installed, any red letters on the back side of the document will automatically not be scanned.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model No.
KV-S6050WU
KV-S6055WU
Item
Scanning face
Simplex scanning
Duplex scanning
ADF front side/Flatbed :
CCD image sensor
ADF back side :
Scanning method
CCD image sensor
CIS (Contact Type Image Sensor)
Flatbed
ADF
1.5 sec (1 paper, A4 size, 200 dpi)
Simplex scanning :
Approx. 53 sheets/min.
Readout speed
(A4, fed lengthwise, 200 dpi)
Approx. 45 sheets/min.
(A4, fed lengthwise, 200 dpi)
Duplex scanning :
(KV-S6055W only)
Main scanning direction : 100 T 600dpi (1 dpi step)
Sub-scanning direction : 100 T 600dpi (1 dpi step)
The optical resolution is 400 dpi.
Resolution
Flatbed/ADF
Binary mode, Grayscale mode (4/8 bit), 64-step gradation
(dither) mode, 64-step gradation (error diffusion) mode
Tonal gradation
Image control
Scanner
Image emphasis, Dynamic threshold (DIMM required),
Automatic threshold, Automatic separation, Monochrome
reversing, Automatic back control
Size for Flatbed
Size for ADF
T 298a432mm
Scanning size :
70a169mm, and
106a148mm to 298a432mm
Feeding size :
70 a169mm, and
106a148mm to 305 a432mm
Paper
Single paper feeding
Continuous paper feeding : 0.06 to 0.15mm
: 0.05 to 0.15mm
Thickness for ADF
Weight for ADF
2
Single paper feeding
: 40 to 127 g/m
2
Continuous paper feeding : 50 to 127 g/m
2
Hopper capacity
200 sheets [64 g/m , un used paper]
a
a
External dimensions (WidthaDepthaHeight) 464 717 296mm
Mass (Weight)
30kg
Power requirement
AC220 - 240V, 50/60Hz
Unit
Maximum
(Scanning)
1.0A
Power consumption
Minimum (Standby) 0.3A
Sleep mode
0.07A
Operating
Operating temperature and humidity
Storage temperature and humidity
15°C to 30°C, 30% to 80%RH
Environment
Storage
Environment
0°C to 35°C, 10% to 80%RH
Roller exchange kit (KV-SS044), lmprinter unit (KV-SS010), Red lamp option (KV-SS045),
Roller cleaning paper (KV-SS03), Ink cartridge (KV-SS06), White roller kit (KV-SS049)
Option
• The red lamp option (KV-SS045) must be installed by a trained service engineer. Consult your dealer.
• If the red lamp is installed, any red letters on the back side of the document will automatically not be scanned.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs while the unit is being used, first check the following items. If the unit still malfunctions, turn it
OFF, unplug the power cord and call for service.
Symptom
Possible Cause
Remedy
The power cord is not plugged in.
A fuse has blown.
Insert the power plug firmly.
The LCD does not display
when the power switch is
turned ON.
Pull out the power plug, then call for
service.
Foreign matter is lodged in the fan,
preventing it from rotating.
The scanner rattels during
initialization after turning
on, and the LCD displays
“F41 Call Service”.
Remove the metal clamp and re-attach it
The optical unit of flatbed remains affixed at the proper position (position B).
by the metal clamp.
(Refer to “Installation” on the Installation
Manual.)
The rollers are dirty.
Double feeding problem
occurs.
Clean all of the rollers.
Retard roller is not installed correctly.
Make a copy of the document on paper
of the specified size [between
106a148mm (4.2a5.8 in.) and A3 size]
and scan the copy.
The document is creased or torn, or longer
than A3 size or smaller than 106a148mm
(4.2a5.8 in).
The document stops
during scanning in the
ADF.
Open the front or ADF door and remove
the jammed paper.
The document is jammed.
The rollers are dirty.
Clean all of the rollers.
The document is not fed
smoothly into the ADF
during scanning.
Replace paper feed roller module,
separation roller module and retard roller
Paper feed rollers, separation roller and
retard roller are the end of their life.
The document to be scanned was loaded
face down (upside down).
Load the document correctly.
The scanned document is
blank.
The scanning conditions are set on the
computer side but the scanner condition
setting for each item have not become
“Host”.
Return all of the scanning conditions for
each item’s setting to “Host”.
The document guides were not touching
the edges of the document, or the
document was skewed when loaded.
The scanned document is
skewed.
Set the document guides or the
document correctly.
Vertical lines appear on
the scanned document.
The sensor roller, scanning section glass Wipe the dirty parts with a clean cloth.
or the rubber rollers are dirty.
The scanned document is
faint.
Clean the sensor roller.
The sensor roller is dirty.
Turn the computer OFF. Turn the scanner
ON, and then turn the computer ON again.
Confirm the SCSI ID, product ID and
terminator, and then set them correctly.
The computer does not
recognize the scanner.
The computer cannot recognize the
scanner.
Use a shielded cable which is as short
as possible. Reduce the SCSI transfer
rate, and then proceed.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible Cause
Remedy
Please clean the double feed detection
sensor with the included blower.
(See page 48.)
There is dust from the paper on the
double feed detection sensor.
The double feed detection
sensor is not operating.
The double feed detector sensitivity
setting does not match the scanning
document.
Change the double feed detector
sensitivity setting. (See page 25.)
Black dots or white
patches occur when
scanning with flatbed.
The document glass and cover sheet are Clean the document glass and cover
dirty. sheet. (See page 51.)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
LCD
Possible Cause
Remedy
✽ ✽ ✽ W a r n i n g ✽ ✽ ✽
Clean the rollers.
The rollers are dirty.
C l e a n
R o l l e r
Replace the paper feed roller
module, separation roller module
and retard roller module.
The rollers need to be
replaced.
✽ ✽ ✽ W a r n i n g ✽ ✽ ✽
R e p l a c e R o l l e r
✽ ✽ ✽ W a r n i n g ✽ ✽ ✽
D b l F e e d O c u r r e d
Double feed may have
occurred.
Check the scanned data.
Open the front or ADF door and
remove the jammed paper.
(See pages 42 and 43.)
The document is jammed.
U 1 1
J A M
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
Dust adheres to the paper
detection sensor.
Clean a dust using the included
blower. (See page 48.)
U 1 2
U 1 4
U 1 6
J A M
J A M
J A M
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
The document is jammed or
the document has been feeded remove the jammed paper.
obliquely.
Open the front or ADF door and
(See pages 42 and 43.)
Open the front or ADF door and
remove all of the remaining
documents.
A document remains in the
scanner.
U 1 8
R e m a i n d
D o c .
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
Dust adheres to the document
sensors.
Clean a dust using the included
blower. (See pages 48 and 49.)
A document has been feeded
obliquely.
Open the ADF door and remove
the paper.
U 2 0
S k e w
E r r o r
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
Open the front or ADF door and
remove the jammed paper.
(See pages 42 and 43.)
Multiple sheets were fed into
the unit.
U 2 3
D o u b l e
F e e d
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
LCD
Possible Cause
Remedy
U 3 0
U 3 1
U 3 4
U 3 5
F r o n t
D o o r
The front door is open.
Close the front door .
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
D o o r
A D F
The ADF door is open.
Close the ADF door.
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
The imprinter (top) door is
open.
T o p
D o o r
Close the imprinter door.
Close the document cover.
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
D o c .
C o v e r
The document cover is open.
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
H ✕ ✕
C a l
C a l
l
l
S e r v
i
c e
Please consult with a service
representative.
Call technical service support.
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕ A user non-servicable error
has occurred.
F ✕ ✕
S e r v
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
i
c e
An interface board has not
been installed.
Reinstall scanner’s interface
board.
U 5 0
N o
I
/ F
B o a r d
✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
page
page
L
S
Select the counter displayed on the
M
N
O
T
P
U
R
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Panasonic Digital Imaging Solutions Company
Business Unit of Matsushita Electric Corporation of America
Two Panasonic Way, Secaucus, New Jersey 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
Matsushita Electric Industrial Co., Ltd.
E-0529
Download from Www.Somanuals.com. All Manuals Search And Download.
|