Panasonic MP3 Player CQ RX101W User Manual

Operating Instructions  
AAC WMA MP3 CD Player/Receiver  
Model: CQ-RX300W  
WMA MP3 CD Player/Receiver  
Model: CQ-RX200W/CQ-RX105W/  
CQ-RX102W/CQ-RX101W  
(CQ-RX300W)  
(CQ-RX300W)  
• Please read these instructions carefully before using this product and keep this manual for future reference.  
Accessories  
Q’ty  
Q’ty  
Installation kit (YEP0FZ5698)  
Instruction kit \CQ-RX300W\ \CQ-RX200W\  
Operating Instructions  
1 set  
Lock Cancel Plate  
(English:  
(Pуccкий: YGFM286062)  
(ʑᄽ: YGFM286064)  
YGFM286063)  
Mounting Bolt (5 mm œ)  
1 set  
(한국어: YGFM286065)  
XXXXXXXXXXXXXXX  
XXXXXXXXXXXXXXXXX  
XXXXXXXXXXXXXX  
XXXXXXXXXXXXXXXX  
OO-OOOOO  
Rubber Bushing  
System Upgrade Guidebook  
(YGFM262852)  
1
1
Installation Instructions  
(YGFM294420)  
Q’ty  
1
Mounting Collar  
(YEFX0217263A)  
Q’ty  
Instruction kit \CQ-RX105W\  
Operating Instructions  
1 set  
Trim Plate  
(YGFC051023)  
1
1
(English:  
(ʑᄽ:  
YGFM286063)  
YGFM286064)  
(한국어: YGFM286065)  
Power Connector  
(K1HY13YY0003)  
Installation Instructions  
(YGFM294420)  
1
\CQ-RX300W\ \CQ-RX105W\  
Remote Control Unit (includes a  
battery)  
(EUR7641010)  
Q’ty  
Instruction kit \CQ-RX102W\ \CQ-RX101W\  
1
1
Operating Instructions  
1 set  
(English:  
(Pуccкий: YGFM286062)  
(ʑᄽ: YGFM286064)  
YGFM286063)  
Removable Face Plate Case  
(YGFA134302)  
Installation Instructions  
1
(YGFM294420)  
Notes:  
• The number in parentheses underneath each accessory part  
name is the part number for maintenance and service.  
• Accessories and their part numbers are subject to modification  
without prior notice due to improvements.  
• Mounting Collar and Trim Plate are mounted on the main unit at  
shipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 1 -  
Caution  
THIS PRODUCT IS A CLASS I LASER PRODUCT.  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION EXPOSURE.  
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 3 -  
Features  
Expansion Module (Hub Unit)  
SQ (Sound Quality)  
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You  
can customize your settings for these and save them for instant recall.  
SQ3 (3-Band Sound Quality)  
\CQ-RX300W\ \CQ-RX200W\  
Connection of the Expansion Module (hub unit, CY-EM100N) allows  
users to connect up to 4 optional devices shown below.  
Center frequency and level are adjustable in each of 3 bands. This lets  
you fine-tune sound quality for each genre to suit car-interior acoustics  
and your personal preferences. (« “Sound Control”)  
Wide Array of Components for System Upgrade  
\CQ-RX300W\ \CQ-RX200W\  
Various optional components allow users to obtain availability of wide  
range of system upgrade. Upgrading the system delivers relaxed AV  
space in a car. For further information, refer to the separate System  
Upgrade Guidebook.  
USB Connector  
\CQ-RX300W\  
The USB Connector is equipped on the front panel.  
(« System Upgrade Guidebook)  
iPod  
By connecting a USB memory (not included) to USB connector via a  
USB extension cable (USB 2.0, not included), you can enjoy MP3/  
WMA/AAC files stored on the USB memory (not included) in your car.  
The optional adaptor (Direct Cable for iPod: CA-DC300N) allows  
you to connect the optional iPod series.  
iPod is a trademark of Apple Inc., registered in the U.S. and other  
countries.  
AUX (AUX1) Input Terminal  
• CD Changer  
The AUX input terminal is equipped on the front panel.  
Your mobile audio player and other devices are connectable to this unit  
without any difficulty.  
The optional adaptor (Conversion Cable for DVD/CD Changer:  
CA-CC30N) allows you to connect the optional Panasonic CD  
changer unit (CX-DP880N).  
Bluetooth®  
Using the optional Bluetooth Unit (CY-BT200N) and a Bluetooth  
device enables hands-free telephony and Bluetooth Audio listening  
with this unit.  
Note: This unit does not support CY-BT100N.  
Bluetooth®  
The Bluetooth word mark and logo are owned by the Bluetooth SIG,  
Inc. and any use of such marks by Matsushita Electric Industrial Co.,  
Ltd. is under license. Other trademarks and trade name are those of  
their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 4 -  
Before Reading These Instructions  
Panasonic welcomes you to our constantly growing family of electronic products owners.  
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and  
assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of  
enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.  
\CQ-RX300W\ \CQ-RX200W\  
The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit.  
The other is “System Upgrade Guidebook” describing the optional devices such as CD changer.  
Differences Among 5 Models  
This operating instruction manual is for 5 models CQ-RX300W, CQ-RX200W, CQ-RX105W, CQ-RX102W and CQ-RX101W. All illustrations  
throughout this manual represent model CQ-RX300W unless otherwise specified. The following table describes the differences among 5 models.  
Models  
CQ-RX300W  
Included  
Included  
CQ-RX200W  
Not included  
CQ-RX105W  
Included  
CQ-RX102W  
Not included  
CQ-RX101W  
Not included  
Features  
Remote Control Unit  
System Upgrade  
Guidebook  
Included  
Not included  
Not included  
Not included  
System-up Connector Supported  
Supported  
1 (Rear)  
Not Supported  
1 (Rear)  
Not Supported  
1 (Rear)  
Not Supported  
1 (Rear)  
Preamp Out Connector 2 (Front/Rear)  
USB Connector  
AAC playback  
Supported  
Supported  
Green  
Not Supported  
Not Supported  
Green  
Not Supported  
Not Supported  
Green  
Not Supported  
Not Supported  
Green  
Not Supported  
Not Supported  
Red  
Button logo color  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 5 -  
Maintenance/Fuse  
Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior  
cleaning. Never use benzine, thinner, or other solvents.  
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center.  
Warning  
• Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit  
directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest  
authorized Panasonic Service Center.  
Anti-Theft System  
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.  
Notes:  
• Do not touch the contacts on the face plate and the main  
unit, since this may result in poor electrical contact.  
• If dirt or other foreign substances get on the contacts, wipe  
them off with a clean and dry cloth.  
Removing  
Mounting  
Turn off the power.  
Slide the left side of the face plate in place.  
1
1
Press []. The face plate will open.  
Pull it out toward you.  
2
3
4
Press the right end of face plate until a  
2“click” is heard.  
Put the face plate in the case.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 6 -  
Specifications  
General  
Disc Player  
Power supply  
:DC 12 V (11 V – 16 V DC), test  
Sampling frequency  
DA converter  
:8 times oversampling  
:1 bit DAC System  
:Astigma 3-beam  
:Semiconductor laser  
:790 nm  
:20 Hz – 20 kHz ( 1 dB)  
:96 dB  
:0.01 % (1 kHz)  
:Below measurable limits  
:85 dB  
voltage 14.4 V, negative ground  
:Less than 2.1 A  
Current consumption  
Maximum power output  
Power output  
Pick-up type  
(CD mode; 0.5 W x 4 channels)  
:50 W x 4 channels (at 1 kHz)  
volume control maximum  
:18 W x 4 CH (1 kHz, 1 %, 4 j)  
Light source  
Wave length  
Frequency response  
Signal to noise ratio  
Total harmonic distortion  
Wow and flutter  
Channel separation  
Tone/SQ adjustment range :SQ Low/Bass: 12 dB  
(at 60 Hz, 80 Hz, 100 Hz, 200 Hz)  
SQ Mid: 12 dB  
(at 500 Hz, 1 kHz, 2 kHz, 3 kHz)  
SQ High/Treble: 12 dB  
(at 10 kHz, 12 kHz, 15 kHz, 18 kHz)  
:4 – 8 j  
FM Radio  
Frequency range  
Usable sensitivity  
Frequency response  
Speaker impedance  
Pre-amp output voltage  
:2.0 V (CD mode, 1 kHz, 0 dB)  
:87.50 MHz – 108.00 MHz  
:6 dB/μV (S/N 30 dB)  
:30 Hz – 15 kHz ( 3 dB)  
Pre-amp output impedance :200 j  
USB Connector \CQ-RX300W\  
USB Standard Compatibility :1.1/2.0 Full Speed  
Maximum Supply Current :500 mA  
Front AUX input  
Alternate channel selectivity :75 dB  
Stereo separation  
Image rejection ratio  
IF rejection ratio  
:35 dB (at 1 kHz)  
:70 dB  
:100 dB  
:62 dB  
Input impedance  
Allowable external input :2.0 V  
Connector  
Dimensions (W x H x D)  
Weight  
:10 kj  
Signal/noise ratio  
:3.5 mm œ Stereo mini-pin  
:178 x 50 x 160 mm  
AM Radio  
Frequency range  
Usable sensitivity  
:1.2 kg  
:531 kHz – 1 602 kHz  
:28 dB/μV (S/N 20 dB)  
Notes:  
• Specifications and design are subject to modification without  
notice due to improvements.  
• Some figures and illustrations in this manual may be different  
from your product.  
Notes:  
(CA-RC80N)  
• Remote Control Unit for CQ-RX200W/CQ-RX102W/CQ-RX101W  
is option (CA-RC80N).  
Mute/attenuation  
• The optional remote control is available from your local dealer.  
(CA-RC80N)  
Power  
Mode  
Volume  
(Source)  
Tune  
Track selection  
Fast forward/fast reverse  
Band  
Pause  
Matsushita Electric Industrial Co., Ltd.  
YGFM286063A FT1007-1117 Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 7 -  
RDo not install the product where it is exposed to strong  
vibrations or is unstable.  
Avoid slanted or strongly curved surfaces for installation. If the  
installation is not stable, the unit may fall down while driving and  
this can lead to an accident or injury.  
RInstallation Angle  
The product should be installed in a horizontal position with the  
front end up at a convenient angle, but not more than 30˚.  
The user should bear in mind that in some areas there may be  
restrictions on how and where this unit must be installed. Consult  
your dealer for further details.  
RWear gloves for safety. Make sure that wiring is  
completed before installation.  
Caution  
Observe the following cautions when using this  
unit.  
RKeep the sound volume at an appropriate level.  
Keep the volume level low enough to be aware of road and traffic  
conditions while driving.  
RThis unit is designed for use exclusively in automobiles.  
RDo not operate the unit for a prolonged period with the  
engine turned off.  
Operating the audio system for a long period of time with the  
engine turned off will drain the battery.  
RTo prevent damage to the unit, do not connect the power  
connector until the whole wiring is completed.  
RDo not connect more than one speaker to one set of  
speaker leads. (except for connecting to a tweeter)  
RDo not expose the unit to direct sunlight or excessive  
heat.  
Otherwise these will raise the interior temperature of the unit, and  
it may lead to smoke, fire, or other damage to the unit.  
RDo not use the product where it is exposed to water,  
moisture, or dust.  
Exposure of the unit to water, moisture, or dust may lead to  
smoke, fire, or other damage to the unit. Make especially sure that  
the unit does not get wet in car washes or on rainy days.  
RSet the volume level to low enough before the AUX  
connection is completed.  
Failure to observe this, the loud noise may come out and damage  
your speakers and your hearing. Direct connection of the speaker/  
headphone output of an external device without any attenuator  
may distort sound or damage the connected external device.  
Observe the following cautions when handling the  
battery for the remote control unit.  
\CQ-RX300W\ \CQ-RX105W\  
• Use only specified battery (CR2025).  
• Match the polarity of the battery with the (+) and (–) marks in the  
battery case.  
• Replace a dead battery as soon as possible.  
• Remove the battery from the remote control unit when not using it  
for an extended period of time.  
• Insulate the battery (by placing them in a plastic bag or covering  
them with vinyl tape) before disposal or storage.  
• Dispose of the battery according to the local regulations.  
• Do not disassemble, recharge, heat or short the battery. Do not  
throw a battery into a fire or water.  
Observe the following cautions when installing.  
RRefer wiring and installation to qualified service  
personnel.  
Installation of this unit requires special skills and experience. For  
maximum safety, have it installed by your dealer. Panasonic is not  
liable for any problems resulting from your own installation of the  
unit.  
RFollow the instructions to install and wire the product.  
Not following the instructions to properly install and wire the  
product could cause an accident or fire.  
In case of battery leakage  
• Thoroughly wipe the battery liquid off the battery case and insert  
new battery.  
• If any part of your body or clothing comes into contact with battery  
liquid, wash it with plenty of water.  
• If battery liquid comes into contact with your eyes, wash them with  
plenty of water and get immediate medical attention.  
RTake care not to damage the leads.  
Observe the following cautions when using USB  
When wiring, take care not to damage the leads. Prevent them  
from getting caught in the vehicle chassis, screws, and moving  
parts such as seat rails. Do not scratch, pull, bend or twist the  
leads. Do not run them near heat sources or place heavy objects  
on them. If leads must be run over sharp metal edges, protect the  
leads by winding them with vinyl tape or similar protection.  
RUse the designated parts and tools for installation.  
Use the supplied or designated parts and appropriate tools to  
install the product. The use of parts other than those supplied  
or designated may result in internal damage to the unit. Faulty  
installation may lead to an accident, a malfunction or fire.  
RDo not block the air vent or the cooling plate of the unit.  
Blocking these parts will cause the interior of the unit to overheat  
and will result in fire or other damage.  
device. \CQ-RX300W\  
• Do not connect a USB device directly to this unit. If the USB device  
is connected directly to this unit and an accident occurs, or if the  
brakes are applied suddenly, the driver or passenger may bump  
into the USB device and may get injured.  
• Position the USB device and USB extension cable so that they do  
not obstruct your driving.  
• Do not connect any USB device other than USB memory or a  
USB audio player. Do not connect multiple USB devices to the  
USB connector. Drawing power for multiple USB devices from the  
connector could cause overheating and smoking.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 8 -  
Notes on Discs  
If you use commercial CDs, they must have either of these labels shown at  
right.  
Some copy-protected music CDs are not playable.  
How to hold the disc  
Disc Insert  
• Do not touch the underside of the disc.  
• Do not scratch on the disc.  
The surfaces of new discs tend to be slippery. Therefore,  
when using such a disc for the first time, it may not load  
satisfactorily even when it has been inserted into the unit. At  
a time like this, insert the disc into the unit as far as it will go  
until it is loaded properly.  
• Do not bend the disc.  
• When not in use, keep disc in the case.  
Printed side  
• When inserting a disc into or ejecting and removing it  
from the unit, insert it straight in or eject and remove it  
straight out in parallel with the unit.  
Observe, the disc may be scratched or marked in the  
process.  
• When inserting a disc, do not put one disc on another.  
Failure to observe this may cause the discs to be jammed.  
Do not use discs that fit any of the descriptions given below.  
Using these discs may damage the discs or cause the unit to  
malfunction.  
Special discs in a shape which is not round  
Do not leave discs in the following places:  
• Direct sunlight  
• Near car heaters  
• Dirty, dusty and damp areas  
• On seats and dashboards  
Partly or wholly transparent disc  
Disc cleaning  
• Use a dry, soft cloth to wipe from the center outward.  
Wholly transparent disc  
Partly transparent disc  
Wholly semi-transparent disc may not be played back.  
<Correct>  
<Wrong>  
Discs with adhered labels, etc. on them  
• Do not attach any seals or labels to your discs.  
• Do not write on the disc label in a heavy pen or ballpoint  
pen.  
Disc with adhered stickers Labels created by a printer  
or tape  
Notes on CD-Rs/RWs  
• You may have trouble playing back some CD-R/RW discs  
recorded using CD recorders (CD-R/RW drives), either  
due to their recording characteristics or dirt, fingerprints,  
scratches, etc. on the disc surface.  
• CD-R/RW discs are less resistant to high temperatures and  
high humidity than ordinary music CD. Leaving them inside  
a car for extended periods may damage and make playback  
impossible.  
Protective films or sheets  
Discs accessories (stabilizers,  
etc.)  
Damaged or deformed discs  
• The unit may not successfully playback a CD-R/RW, that was  
made by the combination of writing software, a CD recorder  
(CD-R/RW drive) and a disc if they are incompatible with one  
another.  
• This player cannot play the CD-R/RW discs if the session is  
not closed.  
Shoddily made discs  
Discs with cracks, scratches or  
parts missing  
• Be sure to observe the handling instructions of CD-R/RW  
discs.  
• This player cannot play CD-R/RW discs which contain other  
than CD-DA or MP3/WMA/AAC data (Video CD, etc.).  
Discs with burrs  
Please remove the burrs  
before use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 9 -  
Notes on MP3/WMA/AAC  
extension and were encoded with Apple iTunes® version 7.  
• The file extension for files encoded with the iTunes Apple  
Lossless Encoder is “.m4a”, but such files cannot be played  
on this player.  
Playable Audio File  
CQ-RX300W  
CQ-RX200W  
CQ-RX105W  
CQ-RX102W  
CQ-RX101W  
MP3/WMA/AAC  
MP3/WMA  
MP3/WMA  
MP3/WMA  
MP3/WMA  
• Files under copyright protection cannot be played.  
Caution  
Never assign the “.mp3”, “.wma” or “.m4a” file  
name extension to a file that is not in the MP3/  
WMA/AAC format.This may not only produce  
noise from the speaker damage, but also damage  
your hearing.  
Notes for AAC playback is only for the model CQ-RX300W.  
What is MP3/WMA/AAC?  
MP3* (MPEG Audio Layer-3) and WMA (Windows MediaTM  
Audio) are the compression formats of digital audio. The former  
is developed by MPEG (Motion Picture Experts Group), and  
the latter is developed by Microsoft Corporation. Using these  
compression formats, you can record the contents of about  
10 music CDs on a single CD media (This figures refer to data  
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of  
128 kbps and a sampling frequency of 44.1 kHz).  
iTunes is a trademark of Apple Inc., registered in the U.S.  
and other countries/regions.  
Windows Media, and the  
Windows logo are trademarks, or  
registered trademarks of Microsoft  
Corporation in the United States  
and/or other countries/regions.  
*MPEG Layer-3 audio coding technology licensed from  
Fraunhofer.  
AAC is an abbreviation for “Advanced Audio Coding”.  
It has been defined as a standard for audio compression  
technology using MPEG 2 and MPEG 4.  
Note: MP3/WMA/AAC encoding and writing software is not  
supplied with this unit.  
Points to Remember When Making MP3/  
WMA/AAC Files  
Common  
• High bit rate and high sampling frequency are recommended  
for high quality sounds.  
• Selecting VBR (Variable Bit Rate) is not recommended  
because playing time is not displayed properly and sound  
may be skipped.  
• The playback sound quality differs depending on the  
encoding circumstances. For details, refer to the instructions  
of your own encoding software and writing software.  
MP3  
• It is recommended to set the bit rate to “128 kbps or more”  
and “fixed”.  
WMA  
• It is recommended to set the bit rate to “64 kbps or more”  
and “fixed”.  
• Do not set the copy protect attribute on the WMA file to  
enable this unit to play back.  
AAC  
• It is recommended to set the bit rate to “128 kbps or more”  
and “fixed”.  
• The formats and extensions for AAC data vary according to  
the encoder software used.  
• AAC files which can be played on this unit have the “.m4a”  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 10 -  
Display Information  
Displayed items  
Recording MP3/WMA/AAC Files on a CD-  
Media/USB-Device  
You are recommended to minimize the chances of making  
a disc that contains both CD-DA files and MP3/WMA/AAC  
files.  
If CD-DA files are on the same disc as MP3, WMA or AAC  
files or the songs may not play in the intended order, or  
some songs may not play at all.  
CD-TEXT  
Disc title  
MP3 (ID3 tag)  
Album name  
Track title  
Title name/artist name  
WMA (WMA tag)  
Album name  
MP3/WMA/AAC  
Folder name  
File name  
Title name/artist name  
AAC (Song information)  
Album name  
Title name/artist name  
When storing MP3 data, WMA data or AAC data on the  
same disc, use different folders for each data.  
• Do not record files other than MP3/WMA/AAC files and  
unnecessary folder on a disc.  
• The name of an MP3/WMA/AAC file should be added by  
rules as shown in the following descriptions and also comply  
with the rules of each file system.  
Displayable characters  
• Displayable length of file name/folder name: within  
32 characters. (Unicoded file and folder names are reduced  
by half in the number of displayable characters.)  
• Name files and folders in accordance with the standard of  
each file system. Refer to the instructions of writing software  
for details.  
• The file extension “.mp3”, “.wma” or “.m4a” should be  
assigned to each file depending on the file format.  
You may encounter trouble in playing MP3/WMA/AAC files or  
displaying the information of MP3/WMA/AAC files recorded  
with certain writing software or CD recorders.  
• ASCII character set and special characters in each language  
can be displayed.  
• Some Cyrillic characters in the Unicode can be displayed.  
• This unit does not have a play list function.  
• Although Multi-session recording is supported, the use of  
Disc-at-Once is recommended.  
ASCII character set  
Supported file systems  
A to Z, a to z, digits 0 to 9, and the following symbols:  
(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~  
QCD-media  
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,  
Special Characters  
À Á Â Ã Å à á â ã å  
Ä ä  
Ò Ó Ô Õ Ö ò ó ô õ ö  
Ù Ú Û Ü ù ú û ü  
Romeo  
Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not  
supported.  
QUSB-device \CQ-RX300W\  
File system is FAT12/16/32  
Notes:  
• With some software in which MP3/WMA/AAC format files  
have been encoded, the character information may not be  
displayed properly.  
• Undisplayable characters and symbols will be converted into  
an asterisk ( ).  
• It is recommended that the length of the file name is less  
than 8 characters (excluding the file extension).  
Compression formats  
(Recommendation: “Points to Remember When Making MP3/WMA/AAC Files” «Left)  
\CQ-RX300W\  
Compression method  
Bit rate  
VBR  
Yes  
Yes  
Yes  
Yes  
Yes  
Sampling frequency  
32, 44.1, 48 kHz  
16, 22.05, 24 kHz  
8, 11.025, 12 kHz  
32, 44.1, 48 kHz  
MPEG 1 Audio Layer-3 (MP3)  
MPEG 2 Audio Layer-3 (MP3)  
MPEG 2.5 Audio Layer-3 (MP3)  
Windows Media Audio Ver. 2B9*  
32 k – 320 kbps  
8 k – 160 kbps  
8 k – 160 kbps  
64 k – 160 kbps  
16 k – 320 kbps  
MPEG 4 Advanced Audio Coding Low  
Complexity (AAC LC)  
8,11.025, 12, 16, 22.05, 24, 32, 44.1,  
48 kHz  
* WMA 9 Professional/LossLess/Voice are not supported.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 11 -  
\CQ-RX200W\ \CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\  
Compression method  
Bit rate  
VBR  
Yes  
Yes  
Yes  
Yes  
Sampling frequency  
32, 44.1, 48 kHz  
16, 22.05, 24 kHz  
8, 11.025, 12 kHz  
32, 44.1, 48 kHz  
MPEG 1 Audio Layer-3 (MP3)  
MPEG 2 Audio Layer-3 (MP3)  
MPEG 2.5 Audio Layer-3 (MP3)  
Windows Media Audio Ver. 2B9*  
32 k – 320 kbps  
8 k – 160 kbps  
8 k – 160 kbps  
64 k – 160 kbps  
* WMA 9 Professional/LossLess/Voice are not supported.  
Folder Selection Order/File Playback Order  
Maximum number of files/folders  
• Maximum depth of trees: 8  
\CQ-RX300W\  
QCD-media  
Root folder  
(Root Directory)  
1
• Maximum number of files  
Folder Selection  
2
CD-media: 999  
USB device: 65 535  
• Maximum number of files in one folder  
CD-media: 999  
In the order  
1
8
4
File Selection  
In the order  
3
USB device: 999  
5
6
• Maximum number of folders:  
CD-media: 256 (Root folder is included.)  
USB device: 255 (Root folder is included.)  
\CQ-RX200W\ \CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\  
• Maximum number of files: 999  
• Maximum number of files in one folder: 999  
• Maximum number of folders: 256 (Root folder is included.)  
8
7
Tree 1 Tree 2 Tree 3 Tree 4  
Tree 8 (Max.)  
Notes:  
QUSB-device \CQ-RX300W\  
• You can shorten the duration between data read and  
playback by decreasing the quantity of files or folders, or  
the depth of the hierarchy.  
• This unit counts the number of folders irrespective of the  
presence or absence of an MP3/WMA/AAC file.  
• If the selected folder does not contain any MP3/WMA/AAC  
files, the nearest MP3/WMA/AAC files in the order of  
playback will be played.  
Root folder  
(Root Directory)  
1
Folder Selection  
In the order  
1
5
2
4
File Selection  
In the order  
3
• Playback order may be different from other MP3/WMA/AAC  
players even if the same disc is used.  
• “ROOT” appears when displaying the root folder name.  
\CQ-RX300W\  
5
• Empty folders stored on the USB memory are not included  
in the folder count.  
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5  
Tree 8 (Max.)  
• Depending on the connected USB memory, the order in  
which the files are played back may differ to the order in  
which the files were stored.  
Copyright  
No warranty  
It is prohibited by copyright laws to copy, distribute and  
deliver copyrighted materials such as music without the  
approval of copyright holder except enjoying yourself  
personally.  
Above description complies with our investigations as of  
September 2007. It has no warranty for reproducibility and  
displayability of MP3/WMA/AAC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 12 -  
Preparation  
Set your car’s ignition switch  
Press [SRC] (PWR: Power).  
C
O
C
A
1to the ACC or ON position.  
2
N
\CQ-RX300W\ \CQ-RX200W\  
The demonstration message appears for initial  
use.  
Press [VOL] (PUSH SEL: Select) to select  
4DEMO.  
Turn [VOL] counterclockwise.  
5For using the remote control, press [0] ().  
Set your car’s ignition switch to the ACC or  
1ON position.  
Press [SRC] (PWR: Power).  
2
Notes:  
Hold down [VOL] (PUSH SEL: Select) for  
• To return to the regular mode, press [DISP].  
• Refer to the section on “Function Settings”.  
• When “NO USB” (\CQ-RX300W\) or “NO DISC” is  
displayed, the Demonstration cannot be cancelled.  
32 sec. or more to open the function menu.  
\CQ-RX300W\ \CQ-RX105W\  
Pull the insulation film out from  
the backside of the remote control  
gently.  
Note: Battery Information:  
Battery Type: Panasonic lithium battery (CR2025) (Included  
in the remote control)  
Battery Life: Approximately 6 months under normal use (at  
room temperature)  
The 24-hour system is used for the clock.  
Adjust the minute.  
5
Press [DISP].  
1
Minute entered  
(clock display)  
Hold down [DISP] for more than  
[]: sets the minute ahead.  
[]: sets the minute back.  
22 seconds.  
Hour blinks  
Press [DISP].  
6
Completed  
Adjust the hour.  
3
Notes:  
Hour entered  
• “ADJUST” is displayed before adjusting the clock.  
• Hold down [] or [] to change numbers rapidly.  
• When “NO DISC” is displayed, the clock cannot be  
adjusted.  
[]: sets the hour ahead.  
[]: sets the hour back.  
Press [DISP].  
Clock Display at Power Off  
4
Press [DISP] to change the display.  
Minute blinks  
Display off  
Clock display (Default)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 13 -  
General  
[SRC] (Source)  
selects a source.  
[PWR] (Power)  
toggles power on/off.  
Remote Control Sensor  
[VOL] (Volume)  
[SQ] (Sound Quality)  
selects a sound type (SQ).  
AUX1 Connector (3.5 mm  
From line output of external sound/audio device (ex. Silicon-  
audio player, HDD player, etc.)  
œ
stereo)  
Caution  
Set the volume level to low enough before the AUX  
connection is completed.  
Failure to observe this, the loud noise may come out  
and damage your speakers and your hearing.  
Power On/Off  
Volume Adjustment  
Set your car’s ignition switch to the ACC or ON position.  
Power on: Press [SRC] (PWR).  
Power off: Hold down [SRC] (PWR) for more  
than 1 second.  
(Setting Range: 0 to 40, Default: 18)  
Turn [VOL].  
Source Selection  
Press [SRC] to change the source.  
\CQ-RX300W\  
QUSB Connector  
\CQ-RX300W\  
When an optional USB memory is connected:  
When loading MP3/WMA/AAC data  
Radio  
Disc Player  
When an optional USB memory is not connected:  
System-up  
Connector  
AUX 1*  
USB Connector  
(«Below)  
(«Right)  
(«Continued below)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 14 -  
Radio (AM/FM)  
[SRC] (Source)  
[TUNE ] [TUNE ]  
selects a source.  
down/up the frequency. (Hold it down for more than 0.5 seconds  
and release it for seek tuning.)  
[DISP] (Display)  
switches the information on the  
display.  
[BAND]  
selects a band in the radio source.  
[APM] (Auto Preset Memory)  
executes APM in the radio source. (Hold it  
down for more than 2 seconds.)  
Preset buttons [1] to [6]  
selects a preset station in the radio source,  
and presets the current station. (Hold it down for more than  
2 seconds.)  
Press [SRC] to select the radio source.  
Frequency Adjustment  
1
2
[TUNE ]: Lower  
[TUNE ]: Higher  
Press [BAND] to select a band.  
Note: Hold down for 0.5 sec. or more and release for  
station search.  
Preset Station Selection  
Press the corresponding preset button from  
[1] to [6] to tune in a preset station.  
Select a station.  
3
Display Change  
Band  
Frequency  
Preset Number  
Press [DISP] to change the display.  
Radio mode display  
(Default)  
Clock display  
lights while receiving an FM stereo signal.  
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.  
Preset stations can be simply called up by pressing [1] to [6].  
Auto Preset Memory (APM)  
Manual Station Preset  
With this operation, stations with good receiving conditions  
can be automatically stored in the preset memory.  
Tune into a station.  
1
Hold down one of the preset buttons from  
Select a band.  
2[1] to [6] for more than 2 seconds.  
1
Hold down [BAND] (APM) for more than  
22 seconds.  
(blinks once)  
The preset stations under best receiving conditions are received  
for 5 seconds each after presetting the stations (SCAN). To stop  
scanning, press one of the buttons from [1] to [6].  
Note: New stations overwrite existing saved stations.  
Note: New stations overwrite existing saved stations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 15 -  
Audio Settings  
[VOL]  
selects a value in the audio menu.  
(PUSH SEL) (Push to select)  
selects items in the audio menu.  
[DISP] (Display)  
exits from the audio menu.  
Press [VOL] (PUSH SEL) to open the audio menu.  
1Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment,  
10 seconds in the SQ adjustment), the display returns to the regular mode.  
Press [VOL] (PUSH SEL) to select a mode to  
Turn [VOL] clockwise or counterclockwise to  
2be adjusted.  
3adjust.  
Volume  
(Setting Range: 0 to 40, Default: 18)  
: Up  
: Down  
Bass  
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)  
: Increased  
: Decreased  
Treble  
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)  
: Increased  
: Decreased  
SQ Adjustment  
/: center frequency up/down  
[] []: Band selection  
[] []: Level up/down  
(Tone/SQ adjustable range : B12 dB to A12 dB (by 2 dB))  
Setting range:  
SQ Low/Bass:  
SQ Mid:  
12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)  
12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)  
SQ High/Treble: 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)  
Balance  
(Setting Range: 15 levels each, Default: CNT (center))  
: Right enhanced  
: Left enhanced  
Fader  
(Setting Range: 15 levels each, Default: CNT (center))  
: Front enhanced  
: Rear enhanced  
(«Continued below)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 16 -  
Sound Control  
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,  
CLUB). You can customize your settings for these and save  
them for instant recall.  
(FLAT) flat frequency response:  
does not emphasize any part. (Default)  
SQ Changeover  
Press [SQ] to activate the SQ selection mode.  
Press [SQ] to select the sound type as follows.  
(ROCK) speedy and heavy sound:  
exaggerates bass and treble.  
Press [DISP] to return to the regular mode.  
(POP) wide-ranged and deep sound:  
slightly emphasizes bass and treble.  
Notes:  
• After pressing [SQ] on the main unit, you can also select a  
sound type by pressing the preset buttons [1] to [6].  
• Please refer to “Audio Settings” for the adjustment to each  
speaker.  
(VOCAL) clear sound:  
emphasizes middle tone and slightly emphasizes treble.  
(JAZZ) jazz-specific deep sound:  
sound with emphasis on sharpness of high-hat and echo  
saxophone.  
(CLUB) club and disco-specific sound:  
reproduction of realism being in a club.  
You can adjust the characteristics of the currently selected  
sound type (SQ). (« Above)  
It is also possible to preset up to 5 different adjusted SQs.  
Press [VOL] (PUSH SEL:  
Select) to open the audio menu.  
1
Press [VOL] (PUSH SEL: Select) to select  
SQ SET.  
2
SQ3 (3-Band Sound Quality)  
Center frequency and level are adjustable in each of 3 bands.  
This lets you fine-tune sound quality for each genre to suit  
car-interior acoustics and your personal preferences.  
Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)  
Adjust each band.  
3
/: center frequency up/down  
[] []: Band selection  
[] []: Level up/down  
SQ Low/Bass:  
SQ Mid:  
12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)  
12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)  
Level  
Frequency  
SQ High/Treble: 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)  
• The bass/treble control level of each frequency is fixed to the  
frequency that has been selected for SQ.  
Hold down the numeric button [2] to [6] for  
4
2 sec. or more.  
To return an adjusted SQ to the default setting  
Press [SQ], and select the SQ which is to be returned to  
the default setting. (Only for main unit)  
• The adjusted SQ is preset in the number of the selected  
button, and return to the regular mode resumes.  
Hold down [BAND] for 2 sec. or more.  
• When you suspend the SQ preset adjustment, each level  
remains your recent adjustment until a new SQ presetting  
operation is performed or you call up the SQ preset.  
Notes:  
• You cannot save any SQ presetting value in [1] button.  
• Any SQ adjustments will not change the call up screen  
names such as ROCK and JAZZ.  
• Do not activate SQ and Bass/Treble at the same time to avoid  
causing sound distortion.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 17 -  
Troubleshooting  
If You Suspect Something Wrong  
Check and take steps as described below.  
Warning  
• Do not use the unit in an irregular condition, for example,  
without sound, or with smoke or a foul smell, which can cause  
ignition or electric shock. Immediately stop using the unit and  
consult your dealer.  
• Never try to repair the unit by yourself because it is dangerous  
to do so.  
If the described suggestions do not solve the problem, it is  
recommended to take the unit to your nearest authorized Panasonic  
Service Center. The product should be serviced only by qualified  
personnel. Please refer the checking and the repair to professionals.  
Panasonic shall not be liable for any accidents arising out of neglect  
of checking the unit or your own repair after your checking.  
Never take measures especially those other than  
indicated by italic letters in “Possible Solution” described  
below because those are too dangerous for users to  
handle themselves.  
Trouble  
Possible Solution  
Trouble  
Possible Solution  
Common  
Radio  
Start the engine. (Or turn the ignition  
switch to the ACC position.)  
Tune in to another station of high-intensity  
waves.  
Make sure that the antenna mounted point  
is grounded properly.  
Frequent noise  
Verify the wiring. (battery lead, power  
lead, ground lead, etc.)  
Fuse blown (Contact the nearest  
Panasonic Service Center.)  
No power  
The preset memory is cleared to return  
to the original factory setting when  
the power connector or battery is  
disconnected.  
Preset data  
deleted  
Ask a professional for fuse replacement.  
Be sure to use the same rated fuse.  
Disable the mute function.  
Verify the wiring.  
Wait until the dew disappears before  
Error Display Messages (Disc Player)  
No sound  
Noise  
(The disc is ejected automatically.)  
The disc is dirty or upside down.  
Check the disc.  
turning on the unit.  
Make sure that grounding is established  
properly.  
(The disc is ejected automatically.)  
The disc has scratches.  
Check the disc.  
Adjust the balance and fader.  
Verify the wiring.  
No sound from  
left, right, front,  
or rear speaker  
No operation by some cause.  
If normal operation is not restored,  
consult your dealer or the nearest  
Service Center to ask for repairs.  
Connect the speaker lead correctly.  
Left and right  
sounds are  
reversed  
Cannot read the file  
Check the disc.  
Disc Player  
A WMA/AAC file can be copyrighted.  
The file protected by copyright is not  
playable.  
Load the disc correctly.  
Clean the disc.  
No sound,  
or disc is  
automatically  
ejected  
\CQ-RX300W\ \CQ-RX200W\  
Note: Refer to the System Upgrade Guidebook for error messages  
regarding optional products.  
Clean the disc.  
Sound skip,  
poor sound  
quality  
The maximum permissible tilt angle is  
30°.  
Secure the unit.  
Sound skip due  
to vibration  
Press []. If the disc is still not ejected,  
contact the nearest Panasonic Service  
Center.  
Disc not  
ejectable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 18 -  
Remote Control Unit  
\CQ-RX300W\ \CQ-RX105W\  
Notes:  
• This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)  
• Aim the remote control at the remote sensor and operate it.  
[BAND] (SET)  
[0] to [9]  
selects a band in the tuner source, toggles pause/play in player source,  
selects a preset station (1 to 6),  
executes the APM (Auto Preset Memory) in tuner source  
presets the current station (Hold it down for more than  
(Hold it down for more than 2 seconds).  
2 seconds.),  
inputs the number in direct selection.  
[#] (NUMBER)  
[MENU] (SEL: Select)  
selects the items in the audio menu.  
[SRC] (SOURCE)  
selects a source.  
(POWER)  
executes the direct selection.  
[RANDOM] [SCAN] [REPEAT]  
toggles on/off each play mode.  
[] []  
down/up the frequency (Hold it down for more than  
0.5 seconds and release it for seek tuning.)  
toggles power on/off.  
[VOL] (volume)  
adjusts the volume, and selects the  
value in the audio menu, etc.  
[MUTE]  
toggles mute on/off.  
(Only for remote control unit)  
Note: You can select mute or  
attenuation. (« “Function Settings”)  
[] []  
skip to the previous/next folder in player mode.  
[] []  
skip to the previous/next track/file in player mode. Hold  
it down for fast reverse/fast forward.  
[DISP] (Display)  
switches the information on display,  
and exits the audio menu.  
Direct Access  
A track (CD mode), file, folder (MP3/WMA/AAC mode) can  
be directly selected.  
Example: Track number 5  
Put a battery in the  
case with (+) side  
facing up.  
Press [#] (NUMBER).  
1
Put the case back.  
Press [5].  
2
Press [BAND] (SET).  
3
Notes:  
Warning  
• To suspend direct selection, press [DISP].  
• For folder selection, enter a number after pressing [#]  
(NUMBER) twice.  
Keep batteries and insulation film out of reach of infants.  
Batteries and insulation film can be ingested, so keep  
them out of the reach of infants. If an infant ingests a  
battery or insulation film, please seek immediate medical  
attention.  
Functions only on Main unit  
The following functions are not available on remote control  
unit.  
Caution  
• SQ selection  
• Disc eject  
• Scroll  
• Tag on/off  
• Remove and dispose of an old battery immediately.  
• Do not disassemble, heat or short a battery. Do not  
throw a battery into a fire or water.  
Battery Replacement  
• Follow local regulations when disposing of a battery.  
• Improper use of batteries may cause overheating, an  
explosion or ignition, resulting in injury or a fire.  
Tough pointed object  
Remove the battery holder with  
the remote control unit placed on  
a flat surface.  
Notes: Battery Information:  
Battery Type: Panasonic lithium battery (CR2025) (Included  
in the remote control)  
Battery Life: Approximately 6 months under normal use (at  
room temperature)  
Stick your thumbnail into  
the groove, and push the  
holder in the direction of  
the arrow, and at the same  
time.  
2
1
Pull it out in the direction  
of the arrow using a tough  
pointed object.  
Back side  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 19 -  
\CQ-RX200W\  
Radio  
QSystem-up Connector  
\CQ-RX300W\ \CQ-RX200W\  
Disc Player  
When an optional device is connected:  
Shift to connected device  
When connecting CD changer  
System-up Connector  
(«Right)  
AUX 1*  
When connecting iPod  
When connecting Bluetooth Unit  
\CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\  
Radio  
Disc Player  
AUX*  
OR  
When an expansion module is connected:  
The devices connected to the ports 1 to 4 are activated in  
sequence after shifting to AUX2 (device connected to the  
AUX terminal of the expansion module).  
QAUX1 Connector  
AUX IN*:  
\CQ-RX300W\ \CQ-RX200W\  
\CQ-RX300W\ \CQ-RX200W\  
Note: For information about connectable devices, refer to  
the System Upgrade Guidebook or the instruction manual  
for each device.  
\CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\  
Note: The connector is labeled “AUX1”, but it appears on the  
display as “<AUX IN>”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 20 -  
Function Settings  
[VOL]  
selects a value in the function menu.  
(PUSH SEL) (Push to select)  
selects items in the function menu.  
[DISP] (Display)  
exits from the function menu.  
Hold down [VOL] (PUSH SEL) for 2 sec. or more to open the function menu.  
1Note: If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.  
Press [VOL] (PUSH SEL) to select a mode to  
Turn [VOL] clockwise or counterclockwise to  
2be adjusted.  
3adjust.  
: On (Default)  
Demonstration  
\CQ-RX300W\ \CQ-RX200W\  
You can set up the monitor to display or hide the  
demonstration screen.  
: Off  
Note: Button operation with either the main unit or  
remote control allows users to cancel the demonstration  
screen for 20 seconds and enable the selected operation  
even in the demo-on mode.  
: Volume down  
by 10 steps  
Mute/Attenuation  
You can select mute or attenuation.  
: Volume off  
(Default)  
: On (Skip  
disabled.) (Default)  
\CQ-RX300W\ \CQ-RX200W\  
AUX1 Skip  
If AUX1 is not used, the AUX1 mode is skipped when  
selecting the source.  
: Off (Skip  
enabled.)  
: On (Skip  
disabled.) (Default)  
\CQ-RX105W\ \CQ-RX102W\  
\CQ-RX101W\  
AUX Skip  
If AUX is not used, the AUX mode is skipped when  
selecting the source.  
: Off (Skip  
enabled.)  
Notes:  
• To return to the regular mode, press [DISP].  
\CQ-RX300W\ \CQ-RX200W\  
• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information,  
refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 21 -  
Notes:  
• The volume can also be adjusted directly using [VOL] on the main unit. (« “General”)  
• For further information on SQ (Sound Quality) settings, refer to “Sound Control”.  
• Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.:  
\CQ-RX200W\ \CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\  
• If the fader is set to front, the pre-amp. output (rear) is decreased.  
\CQ-RX300W\ \CQ-RX200W\  
• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further  
information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 22 -  
Player (Disc Player)  
Notes:  
Playable Audio File  
• The power will be turned on automatically when a disc is loaded.  
• A disc which has both CD-DA data and MP3/WMA/AAC data on it  
may not be reproduced normally.  
CQ-RX300W  
CQ-RX200W  
CQ-RX105W  
CQ-RX102W  
CQ-RX101W  
MP3/WMA/AAC  
MP3/WMA  
MP3/WMA  
MP3/WMA  
MP3/WMA  
Notes for AAC playback is only for the model CQ-RX300W.  
[] []  
skip to the previous/next folder.  
[] (Eject)  
ejects the disc.  
Disc slot  
takes a disc in with the  
Printed side up  
printed side facing up.  
[SRC] (Source)  
selects a source.  
[DISP] (Display)  
switches the information on the display.  
(ꢃꢄ) (Play/Pause)  
toggles pause/play in the player source.  
[4] (RANDOM)/[5] (SCAN)/[6] (REPEAT)  
toggles on/off each play mode.  
[3] (SCROLL)  
[] []  
skip to the previous/next track/file in  
the player mode.  
Hold down either of them for fast  
reverse/fast forward.  
scrolls the information on display.  
Notes:  
• If you insert an 8 cm disc and cannot eject it, turn ACC of your car  
off once and turn it on again, then press [] (Eject).  
• Do not insert foreign matter into the disc slot.  
Do not insert a disc when the  
Refer to the section of “Notes on Discs” and “Notes on MP3/  
WMA/AAC”.  
indicator lights.  
This unit does not support 8 cm discs.  
Press [SRC] to select the Disc Player  
Pause  
Press [BAND] (ꢃꢄ).  
1source.  
2
Select a desired portion.  
Press again to cancel.  
Track/File Selection  
Press [] / [].  
Note: To perform fast forward/reverse, hold down either of  
them.  
Disc Player (CD-DA disc):  
Previous/next track  
Disc Player (MP3/WMA/AAC disc):  
Previous/next file  
Folder Selection (MP3/WMA/AAC)  
Press [] / [].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 23 -  
CD-DA Mode Display  
Display Change  
Lights when the disc is loaded.  
Press [DISP] to change the display.  
Disc Player  
(CD-DA disc):  
Disc Player (MP3/WMA/  
AAC disc):  
Normal  
Disc title  
Track title  
Clock  
Normal  
Play time  
Track number  
Play time  
Play Mode indicators  
Folder name/  
Album*  
File name/  
Title, artist*  
MP3/WMA/AAC Mode Display  
Clock  
*ID3/WMA/AAC Tag On/Off  
Hold down [3] for more than  
2 seconds.  
File number  
Play Mode indicators  
Lights when folder random/repeat/scan is on.  
Folder number  
album title and song title/  
artist name are displayed.  
(Default)  
folder name/file name are  
displayed.  
Notes:  
• For scrolling text, press [3] (SCROLL).  
• “NO TEXT” is displayed when there is no information on the disc.  
Random Play  
All the available songs (tracks/files) are played in a random  
sequence.  
Press [4] (RANDOM).  
Press again to cancel.  
Folder Repeat Play (MP3/WMA/AAC)  
The current folder is repeated.  
Hold down [6] (REPEAT) for more than  
2 seconds.  
Hold down again to cancel.  
Folder Random Play (MP3/WMA/AAC)  
All the available files in current folder are played in a  
random sequence.  
Scan Play  
The first 10 seconds of each songs (tracks/files) is played  
in sequence.  
Hold down [4] (RANDOM) for more than  
2 seconds.  
Hold down again to cancel.  
Press [5] (SCAN).  
Press again to cancel.  
Folder Scan Play (MP3/WMA/AAC)  
From the next folder, the first 10 seconds of the first file in  
each folder is played in sequence.  
Repeat Play  
The current song (track/file) is repeated.  
Press [6] (REPEAT).  
Press again to cancel.  
Hold down [5] (SCAN) for more than  
2 seconds.  
Hold down again to cancel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 24 -  

Milwaukee Saw 2620 20 User Manual
MTD Chipper 243 645C000 User Manual
MTD Lawn Mower 111 010R000 User Manual
Muratec All in One Printer MFX 1300 1700 User Manual
NordicTrack Home Gym NTEL77060 User Manual
Omron Fitness Electronics HJ 321 User Manual
One for All Automobile Parts HFC 302 User Manual
Oregon Scientific Camera Accessories RMR329PA User Manual
Panasonic Computer Drive DVD S500 User Manual
Panasonic PDAs Smartphones CF P1Series User Manual