Panasonic MP3 Docking Station KX PRD262 User Manual

Operating Instructions  
®
Link-to-Cell Docking Station for iPhone  
Model No.  
KX-PRL262  
Link-to-Cell Docking Station for Smartphone  
Model No.  
KX-PRD262  
Model shown is KX-PRL262.  
Before initial use, see “Getting Started”  
Thank you for purchasing a Panasonic product.  
Please read these operating instructions before using the unit and save them for  
future reference.  
Consulte “Guía Rápida Española”, página 72.  
For assistance, visit our Web site: http://www.panasonic.com/help for customers  
in the U.S.A. or Puerto Rico.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Model composition  
Base unit  
Part No.  
Handset  
Series  
Model No.  
Part No.  
Quantity  
KX-PRL260  
series  
KX-PRL262  
KX-PRL260  
KX-PRLA20  
2
KX-PRD260  
series  
KX-PRD262  
KX-PRD260  
KX-PRLA20  
2
Accessory information  
Supplied accessories  
No. Accessory item/Order number  
Quantity  
A
B
C
D
E
F
AC adaptor for base unit/PNLV238-KZ  
1
1
4
2
1
1
Telephone line cord/PQJA10075Z  
Rechargeable batteries/HHR-4DPA  
*1  
Handset cover /PNYNTGHA20BR  
Charger/PNLC1054ZB  
AC adaptor for charger/PNLV233Z  
*1 The handset cover comes attached to the handset.  
A
B
C
D
E
F
Additional/replacement accessories  
Please contact your nearest Panasonic dealer for sales information (page 82).  
Accessory item  
Order number  
*1  
Rechargeable  
batteries  
HHR-4DPA  
R To order, please visit  
Battery type:  
– Nickel metal hydride (Ni-MH)  
– 2 x AAA (R03) size for each handset  
T-adaptor  
KX-J66  
*2  
Range extender  
KX-TGA405  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
         
Introduction  
Accessory item  
Order number  
*3  
Key detector  
KX-TGA20  
*1 Replacement batteries may have a different capacity from that of the supplied batteries.  
*2 By installing this unit, you can extend the range of your phone system to include areas  
where reception was previously not available. This product can be purchased online. Please  
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and  
attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to  
which the key detector is attached. Please visit our Web site:  
Other information  
R Design and specifications are subject to change without notice.  
R The illustrations in these instructions may vary slightly from the actual product.  
Expanding your phone system  
Handset (optional): KX-PRLA20  
You can expand your phone system by  
registering optional handsets (6 max.) to a  
single base unit.  
R Optional handsets may be a different color  
from that of the supplied handsets.  
®
Bluetooth devices  
You can expand your phone system by pairing the following units to a single base unit.  
*1  
Your Bluetooth cellular phone : 2 max.  
(for cellular calls: page 17)  
*1 Your cellular phone must be Bluetooth wireless technology compatible. To use the music  
player feature, your Bluetooth device must support music playback.  
For more details and a list of compatible devices, please visit the following web site.  
Trademarks  
®
R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,  
and any use of such marks by Panasonic Corporation is under license.  
R iPhone is a registered trademark of Apple Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
           
Introduction  
R Lightning is a trademark of Apple Inc.  
R Android is a trademark of Google Inc.  
R All other trademarks identified herein are the property of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Important Information  
R Do not allow the AC adaptor or telephone  
line cord to be excessively pulled, bent or  
placed under heavy objects.  
For your safety  
To prevent severe injury and loss of life/  
property, read this section carefully before  
using the product to ensure proper and safe  
operation of your product.  
Operating safeguards  
R Unplug the product from power outlets  
before cleaning. Do not use liquid or  
aerosol cleaners.  
R Do not disassemble the product.  
R Do not spill liquids (detergents, cleansers,  
etc.) onto the telephone line cord plug, or  
allow it to become wet at all. This may  
cause a fire. If the telephone line cord plug  
becomes wet, immediately pull it from the  
telephone wall jack, and do not use.  
WARNING  
Power connection  
R Use only the power source marked on the  
product.  
R Do not overload power outlets and  
extension cords. This can result in the risk  
of fire or electric shock.  
R Completely insert the AC adaptor/power  
plug into the power outlet. Failure to do so  
may cause electric shock and/or excessive  
heat resulting in a fire.  
R Regularly remove any dust, etc. from the  
AC adaptor/power plug by pulling it from  
the power outlet, then wiping with a dry  
cloth. Accumulated dust may cause an  
insulation defect from moisture, etc.  
resulting in a fire.  
R Unplug the product from power outlets if it  
emits smoke, an abnormal smell, or makes  
an unusual noise. These conditions can  
cause fire or electric shock. Confirm that  
smoke has stopped emitting and contact us  
R Unplug from power outlets and never touch  
the inside of the product if its casing has  
been broken open.  
Medical  
R Consult the manufacturer of any personal  
medical devices, such as pacemakers or  
hearing aids, to determine if they are  
adequately shielded from external RF  
(radio frequency) energy. (The product  
operates in the frequency range of  
1.92 GHz to 1.93 GHz, and the RF  
transmission power is 115 mW (max.).)  
R Do not use the product in health care  
facilities if any regulations posted in the  
area instruct you not to do so. Hospitals or  
health care facilities may be using  
equipment that could be sensitive to  
external RF energy.  
CAUTION  
Installation and location  
R Never touch the plug with wet hands.  
Danger of electric shock exists.  
R Never install telephone wiring during an  
electrical storm.  
R Never install telephone line jacks in wet  
locations unless the jack is specifically  
designed for wet locations.  
R Never touch uninsulated telephone wires or  
terminals unless the telephone line has  
been disconnected at the network interface.  
R Use caution when installing or modifying  
telephone lines.  
R The AC adaptor is used as the main  
disconnect device. Ensure that the AC  
outlet is installed near the product and is  
easily accessible.  
Installation  
R To prevent the risk of fire or electrical  
shock, do not expose the product to rain or  
any type of moisture.  
R Do not place or use this product near  
automatically controlled devices such as  
automatic doors and fire alarms. Radio  
waves emitted from this product may cause  
such devices to malfunction resulting in an  
accident.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
 
Important Information  
R This product is unable to make calls when:  
– the handset batteries need recharging or  
have failed.  
Important safety  
instructions  
– there is a power failure.  
When using your product, basic safety  
precautions should always be followed to  
reduce the risk of fire, electric shock, and  
injury to persons, including the following:  
1. Do not use this product near water for  
example, near a bathtub, washbowl,  
kitchen sink, or laundry tub, in a wet  
basement or near a swimming pool.  
2. Avoid using a telephone (other than a  
cordless type) during an electrical storm.  
There may be a remote risk of electric  
shock from lightning.  
Battery  
R We recommend using the batteries noted  
on page 3. USE ONLY rechargeable  
Ni-MH batteries AAA (R03) size.  
R Do not mix old and new batteries.  
R Do not open or mutilate the batteries.  
Released electrolyte from the batteries is  
corrosive and may cause burns or injury to  
the eyes or skin. The electrolyte is toxic and  
may be harmful if swallowed.  
R Exercise care when handling the batteries.  
Do not allow conductive materials such as  
rings, bracelets, or keys to touch the  
batteries, otherwise a short circuit may  
cause the batteries and/or the conductive  
material to overheat and cause burns.  
R Charge the batteries provided with or  
identified for use with this product only, in  
accordance with the instructions and  
limitations specified in this manual.  
3. Do not use the telephone to report a gas  
leak in the vicinity of the leak.  
4. Use only the power cord and batteries  
indicated in this manual. Do not dispose of  
batteries in a fire. They may explode.  
Check with local codes for possible special  
disposal instructions.  
SAVE THESE INSTRUCTIONS  
R Only use a compatible base unit (or  
charger) to charge the batteries. Do not  
tamper with the base unit (or charger).  
Failure to follow these instructions may  
cause the batteries to swell or explode.  
For best performance  
Base unit location/avoiding noise  
Attention:  
The base unit and other compatible Panasonic  
units use radio waves to communicate with  
each other.  
R For maximum coverage and noise-free  
communications, place your base unit:  
– at a convenient, high, and central  
location with no obstructions between  
the handset and base unit in an indoor  
environment.  
– away from electronic appliances such as  
TVs, radios, personal computers,  
wireless devices, or other phones.  
– facing away from radio frequency  
transmitters, such as external antennas  
of mobile phone cell stations. (Avoid  
putting the base unit on a bay window or  
near a window.)  
A nickel metal hydride battery that is  
recyclable powers the product you have  
purchased.  
Please call 1-800-8-BATTERY  
(1-800-822-8837) for information on how to  
recycle this battery.  
R Coverage and voice quality depends on the  
local environmental conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
     
Important Information  
R If the reception for a base unit location is  
not satisfactory, move the base unit to  
another location for better reception.  
Notice for product disposal, transfer,  
or return  
R This product can store your private/  
confidential information. To protect your  
privacy/confidentiality, we recommend that  
you erase information such as phonebook  
or caller list entries from the memory before  
you dispose of, transfer, or return the  
product.  
Environment  
R Keep the product away from electrical noise  
generating devices, such as fluorescent  
lamps and motors.  
R The product should be kept free from  
excessive smoke, dust, high temperature,  
and vibration.  
Notice  
R The product should not be exposed to  
direct sunlight.  
R Do not place heavy objects on top of the  
product.  
R When you leave the product unused for a  
long period of time, unplug the product from  
the power outlet.  
R The product should be kept away from heat  
sources such as heaters, kitchen stoves,  
etc. It should not be placed in rooms where  
the temperature is less than 0 °C (32 °F) or  
greater than 40 °C (104 °F). Damp  
basements should also be avoided.  
R The maximum calling distance may be  
shortened when the product is used in the  
following places: Near obstacles such as  
hills, tunnels, underground, near metal  
objects such as wire fences, etc.  
R Operating the product near electrical  
appliances may cause interference. Move  
away from the electrical appliances.  
Routine care  
R Wipe the outer surface of the product  
with a soft moist cloth.  
R Do not use benzine, thinner, or any  
abrasive powder.  
Other information  
CAUTION: Risk of explosion if battery is  
replaced by an incorrect type. Dispose of used  
batteries according to the instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
 
Important Information  
Specifications  
R Standard:  
DECT 6.0 (Digital Enhanced Cordless  
Telecommunications 6.0)  
Bluetooth wireless technology 2.1+EDR  
R Frequency range:  
1.92 GHz to 1.93 GHz (DECT)  
2.402 GHz to 2.48 GHz (Bluetooth)  
R RF transmission power:  
115 mW (max.)  
R Power source:  
120 V AC, 60 Hz  
R Power consumption:  
Base unit:  
Standby: Approx. 1.1 W  
Maximum: Approx. 13.5 W  
Charger:  
Standby: Approx. 0.1 W  
Maximum: Approx. 1.8 W  
R Operating conditions:  
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %  
relative air humidity (dry)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Getting Started  
n Charger  
Connect the AC adaptor plug to the  
Setting up  
charger until you hear a click.  
Connect the AC adaptor to the power  
outlet.  
Connections  
Note:  
R If you do not connect the telephone line  
cord and use only cellular lines, set the  
cellular line only mode to use this unit more  
conveniently (page 19).  
R Use only the supplied Panasonic AC  
adaptor PNLV233.  
n Base unit  
2
1
Run the telephone line cord ( ) and AC  
2
adaptor ( ) through the slot of the stand.  
1
1
Connect the telephone line cord ( ) and  
2
AC adaptor ( ) to the jacks at the  
bottom of the unit until you hear a click.  
Connect the AC adaptor to the power  
outlet.  
Connect the telephone line cord to the  
single-line telephone jack (RJ11C) until  
you hear a click.  
Battery installation  
R USE ONLY rechargeable Ni-MH batteries  
1
AAA (R03) size ( ).  
A DSL/ADSL filter (not supplied) is  
required if you have DSL/ADSL service.  
R Do NOT use Alkaline/Manganese/Ni-Cd  
batteries.  
Note:  
R Confirm correct polarities (  
,
).  
R Use only the supplied Panasonic AC  
adaptor PNLV238.  
4
3
1
5
2
1
1
R Follow the directions on the display to set  
up the unit.  
2
Battery charging  
Charge for about 7 hours.  
2
1
1
R Confirm Chargingis displayed ( ).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
         
Getting Started  
R When the batteries are fully charged,  
Fully chargedis displayed.  
the unit is exposed to grease, dust, or high  
humidity.  
1
Battery level  
Icon  
Battery level  
High  
Medium  
Low  
Needs charging.  
Empty  
Panasonic Ni-MH battery  
performance (supplied batteries)  
Note when setting up  
Note for connections  
Operation  
Operating time  
R The AC adaptor must remain connected at  
all times. (It is normal for the adaptor to feel  
warm during use.)  
R The AC adaptor should be connected to a  
vertically oriented or floor-mounted AC  
outlet. Do not connect the AC adaptor to a  
ceiling-mounted AC outlet, as the weight of  
the adaptor may cause it to become  
disconnected.  
*1  
In continuous use  
Not in use (standby)  
10 hours max.  
*1  
6 days max.  
*1 If eco mode is on.  
Note:  
R Actual battery performance depends on  
usage and ambient environment.  
During a power failure  
Intelligent eco mode  
The unit will not work during a power failure.  
We recommend connecting a corded-type  
telephone (without AC adaptor) to the same  
telephone line or to the same telephone line  
jack using a Panasonic T-adaptor (page 3).  
This feature automatically reduces handset  
power consumption by suppressing handset  
transmission power when the handset is close  
to the base unit.  
R When this feature is activated,  
is  
Note for battery installation  
displayed.  
R Eco mode is turned off when the clarity  
booster is activated (page 23).  
R Use the supplied rechargeable batteries.  
For replacement, we recommend using the  
Panasonic rechargeable batteries noted on  
page 3, 7.  
Note for battery charging  
R It is normal for the handset to feel warm  
during charging.  
R Clean the charge contacts of the handset,  
base unit, and charger with a soft and dry  
cloth once a month. Before cleaning the  
unit, disconnect from power outlets and any  
telephone line cords. Clean more often if  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
         
Getting Started  
n Control type  
Soft keys  
Controls  
By pressing a soft key, you can select the  
feature shown directly above it on the  
display. After a cellular phone is paired,  
MCELLN is displayed.  
Handset  
Navigator key  
MDN, MCN, MFN, or MEN: Scroll through  
various lists and items.  
F
G
(Volume: MDN or MCN): Adjust the  
receiver or speaker volume while talking.  
MFN W: View the phonebook entry.  
MEN REDIAL: View the redial list.  
MCN CID (Caller ID): View the caller list.  
A
B
C
Base unit  
n KX-PRL260 series: page 3  
H
B
C
D
E
G
H
I
J
I
J
A
F
D
E
K
A
B
A
K
Charge contacts  
Speaker  
M
N (TALK)  
Dial keypad (*: TONE)  
M
N (Answer on/off, Message)  
MZN (SP-PHONE: Speakerphone)  
Microphone  
Receiver  
indicator  
MZN (Speakerphone) indicator  
CELL 1 indicator  
Display  
CELL 2 indicator  
MOFFN  
Lightning™ connector  
MFLASHNMCALL WAITN  
M
N (Volume: MjN or MkN)  
MZN (Speakerphone)  
N (Locator/Intercom)  
M
N (NOISE REDUCTION/Smart  
M
function key)  
indicator  
Charge contacts  
R You can locate a misplaced handset  
by pressing M N.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
     
Getting Started  
M
M
N (Bluetooth pairing)  
N (Mute)  
Charging your smartphone  
Microphone  
KX-PRL260 series: page 3  
n KX-PRD260 series: page 3  
You can charge your smartphone by placing it  
on the Lightning connector. This connection is  
for charging only; data is not exchanged with  
the base unit.  
B
C
D
E
G
H
I
J
A
F
Note:  
K
L
R You may need to remove your smartphone  
from its case in order to establish a secure  
connection with the Lightning connector.  
Charge contacts  
M
N (Answer on/off, Message)  
indicator  
KX-PRD260 series: page 3  
MZN (Speakerphone) indicator  
CELL 1 indicator  
CELL 2 indicator  
USB cable slot (page 14)  
You can connect a USB cable (not supplied)  
to the rear of the base unit and use it to  
charge your smartphone. This connection is  
for charging only; data is not exchanged with  
the base unit.  
M
N (Volume: MjN or MkN)  
MZN (Speakerphone)  
N (Locator/Intercom)  
M
R You can locate a misplaced handset  
by pressing M N.  
M
M
N (Bluetooth pairing)  
N (Mute)  
Microphone  
USB port (rear of unit)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
   
Getting Started  
n If your smartphone’s USB port is located  
at the center of its bottom panel  
You can also run a USB cable (not  
Item  
Meaning  
A cellular phone is  
connected. Ready to make/  
receive cellular calls.  
R When turned off:  
A cellular phone is not  
connected to the base  
unit. (page 19)  
*1  
1
supplied) through the cable slot ( ) and  
place your smartphone on the base unit for  
charging.  
– A cellular call is being  
done on that line.  
– The cellular line is  
selected for the setting.  
Eco mode is on. (page 11)  
Noise reduction is set.  
(page 23)  
Equalizer is set. (page 24)  
1
Speakerphone is on.  
(page 21)  
Note:  
Answering system is on.  
(page 51)  
R Certain smartphones may not be able to be  
charged via USB.  
*2  
Ringer volume is off.  
(page 34, 35)  
Silent mode is on. (page 40)  
Display icons/Indicators  
Call sharing mode is off.  
(page 37)  
Handset display items  
Alarm is on. (page 39)  
Handset number  
Item  
Meaning  
Within base unit range  
Out of base unit range  
Battery level  
Blocked call (page 40)  
The landline is in use.  
R When flashing:  
The call is put on hold.  
R When flashing rapidly: An  
incoming call is now being  
received.  
Booster  
on  
Clarity booster is on.  
(page 23)  
Music player feature is being  
used. (page 48)  
In use  
Answering system is being  
used by another handset.  
A cellular line is in use.  
R When flashing:  
The cellular call is put on  
hold.  
Cell1 in  
use  
Someone is using the  
corresponding line.  
R When flashing rapidly:  
A cellular call is being  
received.  
Cell2 in  
use  
Line in  
use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
     
Getting Started  
Voice guidance language  
*1 Corresponding cellular line(s) is(are)  
indicated next to the item.  
*2 Corresponding lines (1, 2: cellular line, L:  
landline) are indicated next to the item. If  
all lines are turned off, no line is indicated.  
You can select either Englishor  
Españolas the voice guidance language  
of the answering system. The default setting is  
English.  
CELL indicators on the base unit  
1
2
3
MMENUN (right soft key) #112  
MbN: Select the desired setting.  
MSAVEN a MOFFN  
The CELL indicators show each cellular line  
status.  
Status  
Meaning  
On  
A cellular phone is connected.  
Ready to make/receive  
cellular calls.  
Date and time  
Flashing  
– The cellular line is in use.  
– Phonebook entries are  
being copied from a  
cellular phone (page 47).  
– The base unit is searching  
for the paired cellular  
phone.  
– The base unit is pairing a  
cellular phone.  
– A cellular call is put on hold.  
1
2
MMENUN (right soft key) #101  
Enter the current month, date, and year  
by selecting 2 digits for each.  
Example: July 15, 2014  
07 15 14  
3
4
MOKN  
Enter the current hour and minute  
(12-hour clock format) by selecting 2  
digits for each.  
Flashing  
rapidly  
A cellular call is being  
received.  
Example: 9:30  
09 30  
5
6
*: Select AMor PM.  
Light off  
– A cellular phone is not  
paired to the base unit.  
– A cellular phone is not  
connected to the base unit  
(page 19).  
MSAVEN a MOFFN  
Note:  
R When English is selected as the display  
language, 12-hour clock format is used.  
When Spanish is selected, 24-hour clock  
format is used.  
Language settings  
Display language  
You can select either Englishor  
Españolas the display language. The  
default setting is English.  
Recording your greeting  
message  
You can record your own greeting message  
instead of using a pre-recorded greeting  
message. See page 51 for details.  
1
2
MMENUN (right soft key) #110  
MbN: Select the desired setting. a  
MSAVEN  
1
2
3
MMENUN (right soft key) #302  
MbN: Yesa MSELECTN  
3
MOFFN  
Record a greeting message. a MSTOPN  
a MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
                     
Getting Started  
New message(Default: On)  
New VM(Default: On)  
Missed call(Default: Off)  
The settings can be set for each handset.  
Other settings  
Smart function key (  
key)  
1
2
MMENUN (right soft key) #278  
The Smart function key (  
key) is located  
MbN: Select the desired setting and press  
MSELECTN.  
R “ ” is displayed next to the selected  
on the bottom of the handset and informs you  
with its flashing to allow you to activate the  
following features by simply pressing this key.  
features.  
R To cancel a selected feature, press  
MSELECTN again. “ ” disappears.  
n When the  
you can:  
indicator flashes rapidly,  
3
Note:  
MSAVEN a MOFFN  
– Answer the call (outside call, intercom).  
(page 22, 26)  
– Stop the alarm sound. (page 40)  
R If the  
indicator flashes when the  
n When the  
indicator flashes slowly in  
handset is not placed on the base unit or  
charger, battery consumption is faster than  
usual.  
standby mode, you can:  
– Listen to new messages. (page 52)  
– Listen to new voice mail messages.  
(page 59)  
– View the caller list when there are  
missed calls. (page 45)  
To activate these features, their Smart  
function key must be “On”. (page 16)  
Dialing mode  
If you cannot make calls, change this setting  
according to your telephone line service. The  
default setting is Tone.  
Tone: For tone dial service.  
Using the Smart function key (  
key)  
Pulse: For rotary/pulse dial service.  
1
2
3
MMENUN (right soft key) #120  
MbN: Select the desired setting.  
MSAVEN a MOFFN  
When the  
indicator flashes rapidly/slowly,  
press M  
N.  
R The above features can be activated  
depending the situation.  
R If you answer a call using the Smart  
function key, the speakerphone is activated.  
R Even if the handset is placed on the base  
unit or charger, the feature can be  
activated. You can talk or listen to new  
messages without lifting up the handset. If  
you want to perform further operations, lift  
up the handset.  
R When the unit has new messages, new  
voice mail messages, and missed calls, the  
unit can be operated to play the new  
messages first, play the new voice mail  
messages next, and then show the missed  
calls.  
Screen saver mode  
The backlight goes dark when on a call or  
turns off completely after 1 minute of  
inactivity if the handset is not on the base unit  
or charger.  
Activate the handset display again by:  
– pressing M  
N when on a call.  
– pressing MOFFN at all other times.  
Setting the Smart function key  
The Smart function key for the following  
features must be “On”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
             
Link to Cell  
2
Your cellular phone:  
While the corresponding CELL indicator  
is flashing, follow the instructions of your  
cellular phone to enter the pairing mode.  
R Depending on your cellular phone, it  
may ask you to enter the Bluetooth  
PIN (default: 0000). If your cellular  
phone shows PassKey confirmation on  
its display, follow the directions to  
proceed.  
Link to cell feature  
You can connect your base unit and cellular  
phone using Bluetooth wireless technology, so  
that you can make or answer cellular calls  
using your phone system.  
This allows you to:  
– use the unit to talk on cellular calls even if  
some areas of your home have poor  
cellular reception, simply by placing your  
cellular phone in an area with good  
reception.  
– talk on cellular calls even if your cellular  
phone is in your pocket or bag.  
– enjoy cordless cellular calls even if your  
cellular phone plugged in and charging.  
3
4
Handset:  
Wait until a long beep sounds.  
R It may take more than 10 seconds to  
complete pairing.  
R When the corresponding CELL  
indicator lights up, the cellular phone is  
connected to the base unit. You are  
ready to make cellular calls.  
Important:  
R You may pair a maximum of 2 cellular  
phones. However, the base unit allows only  
one Bluetooth to be active at a time.  
R The unit may not function properly with your  
Bluetooth device’s phone app depending  
on your Bluetooth device model, the  
devices connected to your Bluetooth  
device, and the apps installed on your  
Bluetooth device.  
MOFFN  
Note:  
R Make sure that your cellular phone is set to  
connect to this product automatically. Refer  
to your cellular phone’s operating  
instructions.  
R Make sure you cancel your cellular phone’s  
current pairing if you want to pair it to the  
other line (page 17).  
R The default setting for the text message  
alert feature is On(no announce), so  
when you pair your cellular phone to the  
base unit, this feature may be activated  
(page 49). (This depends on the version  
and type of cellular phone you are using.)  
R Your cellular phone must support the  
Hands Free Profile (HFP) specification.  
Pairing a cellular phone  
Important:  
R For more details and the list of compatible  
cellular phones, please visit our Web site:  
R Before pairing a Bluetooth enabled cellular  
phone to the base unit, make sure that no  
other Bluetooth device is connected to your  
cellular phone.  
Unpairing a cellular phone  
You can cancel the pairing of a cellular phone  
that is stored in the base unit.  
1
For CELL 1: MMENUN (right soft key)  
#6111  
For CELL 2: MMENUN (right soft key)  
#6112  
1
Handset:  
For CELL 1: MMENUN (right soft key)  
#6241  
2
3
MbN: Yesa MSELECTN  
R When the cellular phone is unpaired,  
the CELL indicator is turned off.  
For CELL 2: MMENUN (right soft key)  
#6242  
R After the corresponding CELL indicator  
on the base unit starts flashing, the  
rest of the procedure must be  
completed within 5 minutes.  
MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
           
Link to Cell  
phone’s ringer tone. Caller information is  
not announced even if the Talking Caller ID  
is turned on.  
Link to cell settings  
Important:  
Selecting which unit receives  
cellular calls  
You can select which unit rings and receives  
calls for a cellular line. When Allis  
R To use this feature, your cellular phone  
must support Bluetooth in-band ringtone.  
Refer to your cellular phone’s operating  
instructions.  
selected, all handsets and the base unit ring.  
1
For CELL 1: MMENUN (right soft key)  
#6141  
For CELL 2: MMENUN (right soft key)  
#6142  
1
For CELL 1: MMENUN (right soft key)  
#6271  
For CELL 2: MMENUN (right soft key)  
#6272  
2
3
MbN: Select the desired setting.  
2
3
MbN: Select the desired handset or All.  
a MSAVEN  
MSAVEN a MOFFN  
Note:  
MOFFN  
R The units use the preset ringer tones  
(page 35) instead of your cellular phone’s  
ringer tone when a cellular call is being  
received if:  
Note:  
R When you select a specific handset to  
receive calls for a cellular line:  
– your cellular phone is in silent mode  
(depending on your cellular phone).  
– the base unit is in use.  
– other handsets cannot answer the calls.  
– the base unit can answer the calls even  
though it does not ring. However, you  
can make the base unit ring by adjusting  
the base unit ringer volume (page 34).  
R When you change the setting to All, the  
base unit ringer volume also returns to the  
lowest level even if the ringer volume has  
been changed.  
– 2 handsets are sharing a landline call.  
R If your cellular phone is in silent mode with  
On (with Talking CID)set, the unit  
announces caller information even when  
Talking Caller ID is turned off (page 36).  
R The units selected with this setting have the  
text message alert feature (page 49)  
applied to them.  
To use the handset ringer tone  
instead of your cellular phone’s  
ringer tone  
Select Offin step 2, “Ring as cell mode”,  
page 18.  
To change the handset ringer tone for a  
cellular line, see page 34.  
Ring as cell mode  
Once this feature is turned on, the handset  
and base unit ring using the same ringer tone  
as your cellular phone.  
The following settings are available:  
Off: Turn this feature off to use the  
ringer tones of the handset and base unit.  
Caller information is announced depending  
on the Talking Caller ID setting (page 36).  
On (with Talking CID)(default):  
The handset and base unit use your cellular  
phone’s ringer tone. Caller information is  
announced even if the Talking Caller ID is  
turned off.  
Auto connection to the Bluetooth  
devices (cellular phones)  
After pairing, your Bluetooth devices are  
connected to the base unit. If you move the  
Bluetooth devices out of base unit range, the  
Bluetooth devices are disconnected from the  
base unit. This feature allows the base unit to  
try to reconnect the cellular phone at regular  
intervals when it returns within base unit  
On (without Talking CID): The  
handset and base unit use your cellular  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
               
Link to Cell  
range. You can set the interval. The default  
Important:  
setting is 1 min.  
R This feature is available when Bluetooth is  
not in use and neither the cellular phone  
nor the unit are talking on a call.  
Important:  
R When you are using a cellular line, the base  
unit loses its connection from other  
Bluetooth devices (cellular phone). To  
automatically resume the connection to  
cellular phones, leave the auto connection  
on.  
Press M N and wait for a few seconds for the  
cellular phone and base unit to connect to  
each other.  
Handset  
R Some cellular phones lose connection after  
usage, please check the specifications of  
your cellular phone for more details.  
1
To connect/disconnect:  
For CELL 1: MMENUN (right soft key)  
#6251  
1
2
3
MMENUN (right soft key) #632  
MbN: Select the desired setting.  
MSAVEN a MOFFN  
For CELL 2: MMENUN (right soft key)  
#6252  
R A long beep sounds.  
2
MOFFN  
Note:  
R Some cellular phones may ask you if you  
accept the connection requirement from the  
base unit. In that case, select Offin step  
2. Check the specifications of your cellular  
phone.  
Cellular line only mode (If you do  
not use the landline)  
If you do not use the landline, we recommend  
setting the unit to the cellular line only mode.  
Important:  
Connecting/disconnecting the  
cellular phone manually  
R If you turn on the Cell line only  
mode, disconnect the telephone line cord  
from the base unit. Otherwise the Cell  
line only modecannot be activated.  
If you will not be using the paired cellular  
phone’s link to cell feature temporarily (for  
example, you do not want the unit to ring  
when your cellular line receives a call), you  
can disconnect your cellular phone from the  
base unit. If you want to use it again,  
1
2
MMENUN (right soft key) #157  
To turn on:  
MbN: Ona MSELECTN a  
MbN: Yesa MSELECTN  
To turn off:  
reconnect the cellular phone to the base unit.  
Note:  
MbN: Offa MSELECTN  
R Even if a paired cellular phone was  
disconnected from the base unit, if it is  
brought within the base unit’s range during  
the auto connection interval, it may  
automatically connect to the base unit  
(page 18).  
R A disconnected cellular phone is not  
unpaired from the base unit, so pairing it to  
the base unit again is unnecessary.  
Note:  
R Once you set this mode, you can use the  
following buttons to make cellular calls for  
the handset, press M  
MCELLN (page 21).  
R Once you set this mode, the following  
features cannot be used:  
– Landline features (page 38)  
– Answering system (page 51)  
Messages cannot be received.  
– Voice mail features (page 58)  
R After this mode is turned on or off, the base  
unit reboots.  
N or MZN instead of  
Base unit  
You can search for a cellular phone that is  
paired to the base unit and connect to it easily.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
           
Link to Cell  
– Bluetooth connections from cellular  
phones are disconnected. If the auto  
connection is turned on (page 18), the  
cellular phones are reconnected.  
Changing the Bluetooth PIN  
(Personal Identification Number)  
The PIN is used to pair cellular phones to the  
base unit. The default PIN is 0000. To  
prevent unauthorized access to this product,  
we recommend that you change the PIN, and  
keep it confidential.  
will be displayed on the handset  
momentarily. The handset can be used  
once  
is displayed.  
When you use the landline again  
Important:  
Before connecting the telephone line to the  
only mode (If you do not use the landline)”,  
page 19.  
R Please make note of your new PIN. The  
unit does not reveal the PIN to you. If you  
forget your PIN, see page 68.  
1
MMENUN (right soft key) #619  
R If the unit prompts you to enter the old  
PIN (when the default has been  
Cellular line selection  
This feature determines which cellular line is  
selected to make cellular calls when:  
– you press MCELLN on the handset.  
changed), enter the current 4-digit PIN.  
2
3
Enter the new 4-digit PIN. a MOKN  
Enter the new 4-digit PIN again. a  
MSAVEN  
– you press M  
N or MZN on the handset  
while the cellular line only mode is turned  
on.  
4
MOFFN  
The following settings are available:  
Manual(default): You can select the  
desired cellular line when making a call.  
*1  
– “Cellular phone 1” : CELL 1 is selected.  
*1  
– “Cellular phone 2” : CELL 2 is selected.  
1
2
3
MMENUN (right soft key) #634  
MbN: Select the desired setting.  
MSAVEN a MOFFN  
*1 After the Bluetooth device is paired, the  
device name is displayed.  
Storing your area code (for  
dialing only a 7-digit phone  
number to make a local call)  
You need to add your area code when making  
cellular calls to a phone number in your area.  
Once you store your area code, it is  
automatically added to the beginning of the  
7-digit phone number when making cellular  
calls.  
1
2
MMENUN (right soft key) #633  
Enter the 3-digit area code.  
R To correct a digit, press MCLEARN.  
3
MSAVEN a MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
             
Making/Answering Calls  
Erasing a number in the redial list  
Making cellular calls  
n When a cellular phone is paired:  
Important:  
1
2
MEN REDIAL  
R Only 1 cellular line can be used at a time.  
R Before making calls, confirm that the  
corresponding CELL indicator on the base  
unit lights up (page 15).  
MbN: Select the desired entry. a  
MMENUN  
3
4
5
MbN: Erasea MSELECTN  
MbN: Yesa MSELECTN  
MOFFN  
1
Lift the handset and dial the phone  
number.  
R To correct a digit, press MCLEARN.  
n When a cellular phone is not paired:  
2
MCELLN  
1
2
MEN REDIAL  
R The unit starts dialing when:  
– only 1 cellular phone is paired.  
– a specific line is set to make cellular  
calls (page 20).  
MbN: Select the desired entry. a  
MERASEN  
3
4
MbN: Yesa MSELECTN  
Go to step 4.  
MOFFN  
3
4
MbN: Select the desired cellular phone. a  
MSELECTN  
When you finish talking, press MOFFN or  
place the handset on the base unit or  
charger.  
Making landline calls  
1
Lift the handset and dial the phone  
number.  
R To correct a digit, press MCLEARN.  
Note:  
R To switch to the speaker, press MZN.  
To switch back to the receiver, press MZN/  
2
3
M
N
M
N.  
When you finish talking, press MOFFN or  
place the handset on the base unit or  
charger.  
Adjusting the receiver or speaker  
volume  
Press MDN or MCN repeatedly while talking.  
Using the speakerphone  
1
2
Dial the phone number and press MZN.  
Making a cellular call using the redial  
list  
When you finish talking, press MOFFN.  
Note:  
The last 5 phone numbers dialed are stored in  
the redial list (each 48 digits max.).  
R To switch back to the receiver, press MZN/  
M
N.  
1
2
3
MEN REDIAL  
MbN: Select the desired entry.  
Making a call using the redial list  
MCELLN  
The last 5 phone numbers dialed are stored in  
the redial list (each 48 digits max.).  
R The unit starts dialing when:  
– only 1 cellular phone is paired.  
– a specific line is set to make cellular  
calls (page 20).  
1
2
3
MEN REDIAL  
MbN: Select the desired entry.  
4
MbN: Select the desired cellular phone. a  
MSELECTN  
M
N
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
                   
Making/Answering Calls  
Pause (for PBX/long distance service  
users)  
Adjusting the handset ringer volume  
Press MDN or MCN repeatedly to select the  
desired volume while ringing.  
A pause is sometimes required when making  
calls using a PBX or long distance service.  
When storing a calling card access number  
and/or PIN in the phonebook, a pause is also  
needed (page 30).  
Example: If you need to dial the line access  
number “9” when making outside calls with a  
PBX:  
Using the base unit  
When a landline call is being received, the Z  
indicator flashes rapidly. When a cellular call is  
being received, the CELL 1 or CELL 2  
indicator and Z indicator flash rapidly.  
1
2
3
Press MZN when the unit rings.  
Speak into the microphone.  
1
2
9 a MDN (Pause)  
Dial the phone number. a M  
N
Note:  
When you finish talking, press MZN.  
R A 3.5 second pause is inserted each time  
MDN (Pause) is pressed.  
Adjusting the base unit ringer volume  
Press MjN or MkN repeatedly to select the  
desired volume while ringing.  
R To turn the ringer off, press and hold MkN  
until the unit beeps.  
Answering calls  
Using the handset  
Adjusting the base unit speaker  
volume  
1
Lift the handset and press M  
when the unit rings.  
N or MZN  
Press MjN or MkN repeatedly while talking.  
R To answer a cellular call, you can also  
press MCELLN.  
2
When you finish talking, press MOFFN or  
place the handset on the base unit or  
charger.  
Useful features during a  
call  
Any key answer: You can answer the call by  
pressing any dial key.  
Auto talk: You can answer calls simply by  
lifting the handset (page 37).  
Temporary handset ringer off: You can turn  
Hold  
1
2
3
Press MMENUN during an outside call.  
the ringer off temporarily by pressing M N.  
MbN: Holda MSELECTN  
To release hold on the cellular line:  
Press MCELLN.  
Using the Smart function key  
R Another handset user can take the call:  
When the  
N.  
indicator flashes rapidly, press  
*1  
MCELLN a MSELECTN  
M
*1 The call is taken when:  
– only 1 cellular phone is paired.  
– a specific line is set to make  
cellular calls (page 20).  
R You can answer the call even if the handset  
is placed on the base unit or charger  
(page 16).  
You can finish talking by pressing MOFFN  
without lifting up the handset.  
R The base unit user can take the call by  
pressing MZN.  
To release hold on the landline:  
Press M  
N.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
                         
Making/Answering Calls  
R Another handset user can take the call  
by pressing M N.  
R The base unit user can take the call by  
1
2
Press MCALL WAITN to answer the 2nd  
call.  
To switch between calls, press MCALL  
WAITN.  
pressing MZN.  
Note:  
Note:  
R After holding for 10 minutes, the call is  
R If you receive a call while you are using the  
base unit to talk on a call, a call waiting  
tone is heard. Press MZN, then press MZN  
while the 2nd call is being received. Note  
that the current call will be disconnected.  
R Please contact your service provider/  
telephone company for details and  
disconnected.  
Mute  
Handset  
1
2
Press MMUTEN during a call.  
R MMUTEN flashes.  
availability of this service in your area.  
To return to the call, press MMUTEN.  
Temporary tone dialing for  
landline calls (for rotary/pulse  
service users)  
Note:  
R MMUTEN is a soft key visible on the display  
during a call.  
Press * (TONE) before entering access  
numbers which require tone dialing.  
Base unit  
1
2
Press M N during conversation.  
R Z indicator flashes.  
Handset clarity booster  
To return to the conversation, press M N.  
This feature can improve sound clarity when  
the handset is used in an area where there  
may be interference. During an outside call,  
this feature is turned on automatically when  
necessary.  
R When this feature is turned on, Booster  
onis displayed.  
Flash for landline calls  
MFLASHN allows you to use the special  
features of your host PBX such as transferring  
an extension call, or accessing optional  
telephone services.  
Note:  
Handset noise reduction  
R To change the flash time, see page 37.  
This feature allows you to hear the voice of  
the person you are talking to clearly, by  
reducing the surrounding noise coming from  
the other party’s telephone.  
For call waiting or Call Waiting  
Caller ID service users  
To use call waiting or Call Waiting Caller ID,  
you must first subscribe with your service  
provider/telephone company.  
This feature allows you to receive calls while  
you are already talking on the phone. If you  
receive a call while on the phone, you will hear  
a call waiting tone.  
If you subscribe to both Caller ID and Call  
Waiting with Caller ID services, the 2nd  
caller’s information is displayed after you hear  
the call waiting tone on the handset.  
Press M  
N to turn on/off while talking.  
Note:  
R Depending on the environment where this  
handset is being used, this feature may not  
be effective.  
R This feature is not available using the  
speakerphone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
                   
Making/Answering Calls  
Note:  
Handset equalizer  
R A maximum of 3 parties (including 1 outside  
party) can join a conversation using 2  
extensions. (3-way conference)  
R To prevent other users from joining your  
conversations with outside callers, turn call  
sharing mode off (page 37).  
This feature clarifies the voice of the person  
you are talking to, producing a more  
natural-sounding voice that is easier to hear  
and understand.  
1
2
3
4
Press MMENUN while talking.  
MbN: Equalizera MSELECTN  
MbN: Select the desired setting.  
Press MOKN to exit.  
Transferring calls, conference  
calls  
Outside calls can be transferred or a  
Note:  
*1  
conference call with an outside party can be  
R Depending on the condition and quality of  
your telephone line, this feature may  
emphasize existing line noise. If it becomes  
difficult to hear, turn this feature off.  
R This feature is not available while using the  
speakerphone.  
made:  
– between 2 handsets  
– between a handset and the base unit  
*1 A conference call can be established  
using the handset only.  
R When both the Equalizersetting and  
Handset  
noise reduction are activated,  
shown on the display.  
is  
1
2
3
4
During an outside call, press MMENUN.  
MbN: Intercoma MSELECTN  
MbN: Select the desired unit. a MSELECTN  
Call share  
You can join an existing outside call.  
n While another unit is on a cellular call:  
Wait for the paged party to answer.  
R If the paged party does not answer,  
press M  
N to return to the outside  
Handset  
call.  
5
To complete the transfer:  
Press MOFFN.  
To establish a conference call:  
MMENUN a MbN: Conferencea  
MSELECTN  
R To leave the conference, press MOFFN.  
The other 2 parties can continue the  
conversation.  
1
2
To join the conversation, press MCELLN.  
R You can join the conversation when:  
– only 1 cellular phone is paired.  
– a specific line is set to make cellular  
calls (page 20).  
MbN: Select the desired cellular phone. a  
MSELECTN  
R To put the outside call on hold:  
MMENUN a MbN: Holda  
MSELECTN  
To resume the conference: MMENUN  
a MbN: Conferencea MSELECTN  
R To cancel the conference: MMENUN a  
MbN: Stop conferencea  
MSELECTN  
Base unit  
To join the conversation, press MZN.  
n While another unit is on a landline call:  
Handset  
To join the conversation, press M  
N.  
Base unit  
You can continue the conversation  
with the outside caller.  
To join the conversation, press MZN.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
             
Making/Answering Calls  
Note:  
Base unit  
During an outside call, press M N.  
R When you press MOFFN on the handset to  
end the phone app’s cellular call, the call is  
transferred to the cellular phone. Use the  
cellular phone to disconnect the call.  
Depending on the phone app, the call may  
be disconnected without being transferred  
to the cellular phone.  
1
2
R All registered handsets beep.  
Wait for the paged party to answer.  
R If the paged party does not answer,  
press M N to return to the outside call.  
3
To complete the transfer, press MZN.  
Transferring a cellular call  
between the base unit and a  
cellular phone  
Transferring a cellular call  
between the handset and a  
cellular phone  
Transferring a cellular call from the  
base unit to a cellular phone  
Transferring a cellular call from the  
handset to a cellular phone  
During a cellular call, press and hold M N until  
1
2
Press MMENUN during a cellular call.  
the MZN indicator goes out.  
R The cellular call is transferred to the cellular  
phone.  
MbN: Transfer to cella  
MSELECTN  
R The cellular call is transferred to the  
cellular phone.  
Transferring a cellular call from a  
cellular phone to the base unit  
Note:  
R Depending on your cellular phone type, you  
may need to set the cellular phone to be  
ready to talk before transferring. For  
example, if your cellular phone has a top  
cover, open it beforehand.  
During a conversation using a cellular phone,  
press MZN.  
R The cellular call is transferred to the base  
unit.  
Note:  
R When you press MZN on the base unit to  
end the phone app’s cellular call, the call is  
transferred to the cellular phone. Use the  
cellular phone to disconnect the call.  
Depending on the phone app, the call may  
be disconnected without being transferred  
to the cellular phone.  
Transferring a cellular call from a  
cellular phone to the handset  
During a conversation using a cellular phone,  
the call cannot be transferred to the handset  
by the cellular phone. Perform the following  
with the handset.  
1
During a conversation using a cellular  
phone, press MCELLN.  
Answering a 2nd call  
R In the following cases, go to step 3.  
– when only 1 cellular phone is paired.  
– when a specific line is set to make  
cellular calls (page 20).  
If you receive a call while talking on the phone,  
the interrupt tone sounds (page 35), and the  
2nd caller’s information is displayed on the  
handset if you subscribe to Caller ID  
(page 44).  
2
3
MbN: Select the desired cellular phone. a  
MSELECTN  
MbN: Transfer from cella  
MSELECTN  
R The call is transferred to the handset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
   
Making/Answering Calls  
R If you receive an outside call while talking  
on the intercom, the interrupt tone sounds  
(page 35).  
Answering a 2nd call during a  
landline call  
– To answer the call with the handset,  
press MOFFN, then press the  
corresponding line key.  
– To answer the call with the base unit,  
press MZN 2 times.  
Handset  
1
2
3
Press MMENUN during a landline call.  
MbN: Holda MSELECTN  
To answer the 2nd call:  
Press MCELLN while the 2nd call is being  
received.  
Making an intercom call  
4
To hang up the 2nd call and return to the  
1st call (landline call), press MOFFN, then  
Handset  
1
MMENUN (right soft key) a  
MSELECTN  
a
press M  
N.  
Base unit  
2
3
MbN: Select the desired unit. a MSELECTN  
Press MZN, then press MZN while the 2nd call  
is being received.  
When you finish talking, press MOFFN.  
Note:  
R Note that the current call is disconnected.  
R You can also use the MINTERCOMN soft  
key, if displayed, to make intercom calls.  
Answering a 2nd call during a cellular  
call  
Base unit  
Handset  
1
2
M
N
R All registered handsets beep.  
1
2
3
Press MMENUN during a cellular call.  
MbN: Holda MSELECTN  
To answer the 2nd call:  
When you finish talking, press M N.  
Answering an intercom call  
M
N
4
To hang up the 2nd call and return to the  
1st call (cellular call), press MOFFN, then  
press MCELLN.  
Handset  
1
2
Press M  
When you finish talking, press MOFFN.  
Base unit  
N to answer the page.  
Base unit  
Press MZN, then press MZN while the 2nd call  
is being received.  
R Note that the current call is disconnected.  
1
2
Press MZN to answer the page.  
When you finish talking, press MZN.  
Using the Smart function key  
Intercom  
Intercom calls can be made:  
– between handsets  
Press M  
N to answer the page.  
– between a handset and the base unit  
Note:  
R When paging unit(s), the paged unit(s)  
beeps for 1 minute.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
       
Phonebook  
9
MbN: Select the desired group. a  
MSELECTN  
Phonebook  
10 MbN: <Save>a MSELECTN a MOFFN  
You can store up to 3,000 phonebook entries  
and assign a name (16 characters max.) and  
up to 3 phone numbers to each (24 digits max.  
each). You can also assign a label to each  
phone number, and assign each phonebook  
entry to a group (page 28). The following  
groups are available:  
Storing a redial list number to the  
phonebook  
Phone numbers of up to 24 digits can be  
stored in the phonebook.  
*1  
– Group 1: Home(default)  
– Group 2: Cell 1”  
– Group 3: Cell 2”  
– Group 4-9: You can change the group  
name for each group.  
n When a cellular phone is paired:  
*1  
1
2
MEN REDIAL  
*1  
MbN: Select the desired entry. a  
MMENUN  
3
4
MbN: Savea MSELECTN  
*1 For groups 1-3, the group names cannot  
be changed.  
3, “Editing entries”, page 29.  
The total number of entries that can be stored  
varies depending on how many phone  
numbers you have stored for each entry. Total  
number of entries is shown below:  
1 name + 1 phone number: 3,000 entries  
1 name + 2 phone numbers: 1,500 entries  
1 name + 3 phone numbers: 1,000 entries  
n When a cellular phone is not paired:  
1
2
MEN REDIAL  
MbN: Select the desired entry. a  
MDETAILN  
3
4
MSAVEN  
Important:  
3, “Editing entries”, page 29.  
R All entries can be shared by any registered  
handset.  
R You can copy phonebook entries from a  
Bluetooth cellular phone to the unit’s  
phonebook (page 47).  
Storing caller information to the  
phonebook  
n When a cellular phone is paired:  
1
2
MCN CID  
Adding phonebook entries  
MbN: Select the desired entry. a  
MMENUN  
R To edit the number: MbN: Edita  
1
2
3
4
5
MFN W a MMENUN  
MbN: Add new entrya MSELECTN  
MbN: (Name)a MSELECTN  
Enter the party’s name. a MOKN  
MSELECTN  
Press MEDITN repeatedly until the  
phone number is shown in the  
desired format. And then, press *  
(Save). Go to step 4.  
MbN: Select the desired phone number  
location. a MSELECTN  
3
MbN: Save caller IDa  
MSELECTN  
6
7
Enter the party’s phone number. a MOKN  
MbN: Select the desired label. a  
MSELECTN  
4
5
MbN: Phonebooka MSELECTN  
Continue from step 3, “Editing entries”,  
page 29.  
R To store 2 or 3 phone numbers, repeat  
steps 5-7.  
n When a cellular phone is not paired:  
MCN CID  
8
MbN: Select the current setting of the  
group (default: Home). a MSELECTN  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
             
Phonebook  
R To enter another character that is located  
on the same dial key, first press MEN to  
move the cursor to the next space.  
R If you do not press any dial key within 5  
seconds after entering a character, the  
character is fixed and the cursor moves to  
the next space.  
2
MbN: Select the desired entry. a  
MMENUN  
R To edit the number: MbN: Edita  
MSELECTN  
Press MEDITN repeatedly until the  
phone number is shown in the  
desired format. And then, press  
MSAVEN. Go to step 4.  
R
in the above table represents a single  
space.  
3
MbN: Save caller IDa  
MSELECTN  
Erasing the character or number  
4
5
MbN: Phonebooka MSELECTN  
Press MFN or MEN. a MCLEARN  
R Press and hold MCLEARN to erase all  
characters or numbers.  
Continue from step 3, “Editing entries”,  
page 29.  
Character table for entering names  
Groups  
While entering characters, you can switch  
between uppercase and lowercase by  
pressing * (A®a).  
Groups can help you find entries in the  
phonebook quickly and easily. You can  
change the group name for groups 4-9  
(“Friends”, “Family”, etc.). By assigning  
different ringer tones for different groups of  
callers, you can identify who is calling (ringer  
ID), if you have subscribed to Caller ID service.  
Key  
Character  
1
&
(
)
H
,
.
/
1
2
2
3
3
4
4
5
5
6
6
S
s
8
8
Z
z
2
3
4
5
6
7
8
9
A
a
B
b
E
e
H
h
K
k
C
c
F
f
Changing group names/setting ringer  
ID  
D
d
1
2
3
MFN W a MMENUN  
MbN: Groupa MSELECTN  
G
g
I
MbN: Select the desired group. a  
MSELECTN  
i
J
L
l
R If you selected Home, Cell 1, or  
Cell 2, go to step 5.  
j
M
m
P
p
N
n
Q
q
U
u
X
x
O
o
R
r
4
5
6
To change group names  
MbN: Group namea MSELECTN a  
Edit the name (10 characters max.). a  
MSAVEN  
7
7
To set group ringer tone  
MbN: Select the current setting of the  
group ringer tone. a MSELECTN a MbN:  
Select the desired ringer tone. a MSAVEN  
T
t
V
v
Y
y
W
w
9
9
MOFFN  
0
#
0
Finding and calling from a  
phonebook entry  
#
n Using a cellular line:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
             
Phonebook  
1
2
MFN W  
To search for the name, enter the  
first characters (up to 4) in  
uppercase (page 28).  
To scroll through all entries  
MbN: Select the desired entry. a MCELLN  
To search by first character  
Press the dial key (0 to 9, or #)  
which contains the character you are  
searching for (page 28).  
MbN: Scroll through the phonebook if  
necessary. a MCELLN  
MOKN  
MbN: Scroll through the phonebook if  
necessary. a M  
To search by group  
MGROUPN  
N
MbN: Select the desired group. a  
MSELECTN  
MbN: Scroll through the phonebook if  
To search by query  
You can narrow down the search to enter  
the first characters of a name.  
*
necessary. a M  
MbN: Select the desired phone number.  
a M  
N
3
To search for the name, enter the  
first characters (up to 4) in  
uppercase (page 28).  
N
Editing entries  
MOKN  
MbN: Scroll through the phonebook if  
necessary. a MCELLN  
To search by group  
1
Find the desired entry (page 28). a  
MMENUN  
2
3
MbN: Edita MSELECTN  
MGROUPN  
MbN: Select the desired group. a  
MSELECTN  
MbN: Scroll through the phonebook if  
necessary. a MCELLN  
MbN: Select the desired item you want to  
change. a MSELECTN  
4
To change the name:  
Edit the name. a MOKN  
To change the phone number:  
Edit the phone number. a MOKN  
MbN: Select the desired label. a  
MSELECTN  
To change the group:  
MbN: Select the desired group (page 28).  
a MSELECTN  
3
4
MbN: Select the desired phone number.  
a MCALLN  
R The unit starts dialing when:  
– only 1 cellular phone is paired.  
– a specific line is set to make cellular  
calls (page 20).  
MbN: Select the desired cellular phone. a  
MSELECTN  
5
MbN: <Save>a MSELECTNa MOFFN  
n Using the landline:  
1
2
MFN W  
Erasing entries  
Erasing an entry  
To scroll through all entries  
MbN: Select the desired entry. a M  
To search by first character  
N
1
Find the desired entry (page 28). a  
MMENUN  
Press the dial key (0 to 9, or #)  
which contains the character you are  
searching for (page 28).  
2
3
4
MbN: Erasea MSELECTN  
MbN: Yesa MSELECTN  
MOFFN  
MbN: Scroll through the phonebook if  
necessary. a M  
N
To search by query  
You can narrow down the search to enter  
the first characters of a name.  
Erasing all entries  
*
1
2
MFN W a MMENUN  
MbN: Erase alla MSELECTN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
   
Phonebook  
3
MbN: Select the desired group. a  
MSELECTN  
Adding phone numbers to speed  
dial keys  
4
5
6
MbN: Yesa MSELECTN  
MbN: Yesa MSELECTN  
MOFFN  
n By entering phone numbers:  
1
Press and hold the desired speed dial  
key (1 to 9). a MADDN  
2
3
MbN: Manuala MSELECTN  
Chain dial  
Enter the party’s name (16 characters  
max.). a MOKN  
This feature allows you to dial phone numbers  
in the phonebook while you are on a call. This  
feature can be used, for example, to dial a  
calling card access number or bank account  
PIN that you have stored in the phonebook,  
without having to dial manually.  
4
5
Enter the party’s phone number (24  
digits max.). a MOKN  
MSELECTN a MOFFN  
n From the phonebook:  
1
Press and hold the desired speed dial  
key (1 to 9). a MADDN  
1
During an outside call:  
MMENUN a MbN: Phonebooka  
MSELECTN  
2
3
MbN: Phonebooka MSELECTN  
2
MbN: Select the desired entry. a  
MSELECTN  
MbN: Select the desired entry. a  
MSELECTN  
3
4
MbN: Select the desired phone number.  
4
MbN: Select the desired phone number.  
a MSAVEN a MOFFN  
Press MCALLN to dial the number.  
Note:  
Note:  
R If you edit a phonebook entry which is  
assigned to a speed dial key, the edited  
entry does not transfer to the speed dial  
key.  
R When storing a calling card access number  
and your PIN in the phonebook as one  
phonebook entry, press MDN (Pause) to add  
pauses after the number and PIN as  
necessary (page 22).  
R If you have rotary/pulse service, you need  
to press * (TONE) before pressing  
MMENUN on the handset in step 1 to  
change the dialing mode temporarily to  
tone. When adding entries to the  
phonebook, we recommend adding *  
(TONE) to the beginning of phone numbers  
you wish to chain dial (page 27).  
Editing an entry  
1
Press and hold the desired speed dial key  
(1 to 9). a MMENUN  
2
3
4
MbN: Edita MSELECTN  
Edit the name if necessary. a MOKN  
Edit the phone number if necessary. a  
MOKN  
5
MSELECTN a MOFFN  
Speed dial  
You can assign 1 phone number to each of  
Erasing an entry  
the dial keys (1 to 9) on the handset.  
1
Press and hold the desired speed dial key  
(1 to 9). a MMENUN  
2
3
MbN: Erasea MSELECTN  
MbN: Yesa MSELECTN a MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
         
Phonebook  
Viewing an entry/Making a call  
n Using a cellular line:  
1
Press and hold the desired speed dial  
key (1 to 9).  
2
MCELLN  
R The unit starts dialing when:  
– only 1 cellular phone is paired.  
– a specific line is set to make  
cellular calls (page 20).  
3
MbN: Select the desired cellular phone.  
a MSELECTN  
n Using the landline:  
1
Press and hold the desired speed dial  
key (1 to 9).  
2
M
N
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Programming  
Menu list  
To access the features, there are 2 methods.  
n Scrolling through the display menus  
1
2
3
4
MMENUN (right soft key)  
Press MCN, MDN, MEN, or MFN to select the desired main menu. a MSELECTN  
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN  
Press MCN or MDN to select the desired setting. a MSAVEN  
n Using the direct command code  
1
MMENUN (right soft key) a Enter the desired code.  
Example: Press MMENUN (right soft key) #101.  
2
Select the desired setting. a MSAVEN  
Note:  
R To exit the operation, press MOFFN.  
R In the following table, < > indicates the default settings.  
R In the following table,  
indicates the reference page number.  
R Display menu order and sub-menu may vary depending on your model.  
Display menu tree and direct command code table  
Main menu:  
Operation  
Caller list”  
Code  
#213  
Viewing the caller list.  
44  
Main menu:  
Answering device”  
Sub-menu 2  
Sub-menu 1  
Settings  
Code  
#329  
#323  
#324  
#325  
Message list  
Play new message  
Play all message  
Erase all  
52  
52  
52  
53  
*1  
message  
*1  
Greeting  
#302  
#303  
#304  
51  
52  
51  
Record greeting  
Check greeting  
*1  
Pre-recorded  
(Reset to pre-recorded  
greeting)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
   
Programming  
Sub-menu 1  
Sub-menu 2  
Settings  
Code  
New message  
alert  
Outgoing call  
On/Off  
On  
<Off>  
#338  
53  
*1  
Outgoing call  
Notification to  
Outgoing call  
Activate  
Remote code  
<Inactivate>  
Base unit beep  
On  
<Off>  
#339  
#211  
53  
56  
*1  
Settings  
2-7 rings  
<4 rings>  
Toll saver  
Ring count  
*1  
1 min  
#305  
56  
Recording time  
<3 min>  
Greeting only  
*2  
*1  
<111>  
#306  
#310  
54  
56  
Remote code  
Screen call  
<On>  
Handset  
Off  
Screen call  
<On>  
#G310  
Base unit  
Off  
*1  
#327  
#328  
51  
51  
Answer on  
*1  
Answer off  
*3  
Main menu:  
Operation  
Voice Mail access”  
Code  
#330  
Listening to voice mail messages.  
58  
26  
Main menu:  
Operation  
Intercom”  
Code  
#274  
Paging the desired unit.  
*4  
Main menu:  
Key detector”  
Sub-menu 1  
Search  
Sub-menu 2  
Settings  
Code  
#655  
Battery check  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
 
Programming  
Main menu:  
Sub-menu 1  
Bluetooth”  
Sub-menu 2  
Settings  
Code  
#6251  
#6252  
#6281  
#6282  
*1  
*6  
*7  
*6  
*7  
Link to cell  
19  
22  
22  
Connect  
Disconnect  
/
*1  
1: Add new  
*5  
device  
Ringer volume  
Handset  
Off–6 <6>  
(for CELL 1)  
2: Add new  
*5  
device  
*6  
*7  
Ringer volume  
Base unit  
Off–6 <1>  
#G6281  
(for CELL 2)  
*1  
#G6282  
*8  
*6  
*6  
Ringer tone  
<Tone 2>  
#6291  
*7  
<Tone 4>  
*7  
#6292  
*6  
Select unit to  
ring  
Handset 1-6  
<All>  
18  
18  
#6271  
*1  
*7  
#6272  
*6  
Ring as cell  
<On (with  
Talking CID)>  
On (without  
Talking CID)  
Off  
#6141  
*1  
(limited)  
*7  
#6142  
*6  
Text message  
alert  
On/Off  
<On(no  
49  
50  
#6101  
announce)>  
On(with name)  
Off  
*7  
#6102  
*1  
*6  
*6  
Text message  
alert  
Alert tone  
<Tone 1>  
<Tone 2>  
#6101  
*7  
*7  
#6102  
*9  
*6  
Pair  
17  
17  
48  
#6241  
*7  
#6242  
*6  
Unpair  
#6111  
*7  
#6112  
Music player  
Play music  
#609  
#606  
Music device  
<Cell1>  
Cell2  
Phonebook  
transfer  
#618  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
             
Programming  
Sub-menu 1  
Sub-menu 2  
Settings  
Code  
*1  
Settings  
<1 min>  
3 min  
5 min  
10 min  
Off  
#632  
18  
Auto connect  
*1  
#633  
#157  
20  
19  
Cell area code  
Cell line only  
On  
<Off>  
*1  
mode  
*5  
*5  
Cell line select  
#634  
20  
Cellphone 1  
Cellphone 2  
<Manual>  
*1  
<0000>  
#619  
#117  
20  
47  
Set PIN  
International  
*1  
code  
*1  
#118  
#119  
Country code  
*1  
Trunk prefix  
Main menu: W Phonebook”  
Operation  
Code  
Viewing the phonebook entry.  
#280  
28  
Main menu:  
Sub-menu 1  
Settings”  
Sub-menu 2  
Settings  
Code  
#160  
Ring adjustments  
Ringer volume  
Handset  
Off–6 <6>  
*3  
Ringer volume  
Base unit  
Off–6 <1>  
#G160  
#161  
*1, *3  
*3, *8, *10  
<Tone 1>  
Ringer tone  
(Handset)  
Interrupt tone  
Handset  
<On>  
Off  
#201  
25  
*11  
Interrupt tone  
Base unit  
<On>  
Off  
#G201  
#238  
*1, *11  
Silent mode  
On/Off  
On  
40  
40  
40  
– <Off>  
Start/End  
– <11:00 PM/  
06:00 AM>  
#237  
Select group  
#241  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
           
Programming  
Sub-menu 1  
Sub-menu 2  
Settings  
Code  
#101  
#720  
*1  
Set date & time  
15  
39  
Date and time  
Memo alarm  
Once  
Daily  
Weekly  
<Off>  
Alarm1–5  
Time  
adjustment  
<Caller ID auto> #226  
Manual  
*1, *12  
Talking caller ID Handset  
Base unit  
<On>  
Off  
#162  
44  
*1  
On  
<Off>  
#G162  
#6561  
*1  
Key detector  
setting  
Detector1  
Detector2  
Detector3  
Detector4  
Change name  
*4  
*14  
*14  
*14  
*15  
#6562  
#6563  
#6564  
#6571  
#6572  
#6573  
#6574  
#6581  
#6582  
#6583  
#6584  
#217  
1: Add new  
*15  
*15  
device  
(for Detector1)  
*13  
2: Add new  
device  
Registration  
*15  
*15  
*15  
(for Detector2)  
3: Add new  
device  
(for Detector3)  
4: Add new  
device  
Deregistration  
*15  
*15  
*15  
(for Detector4)  
*1  
Block a single  
number  
40  
Call block  
Block range of  
numbers  
Block unknown CID  
(CID: Caller ID)  
On  
<Off>  
#240  
#173  
41  
41  
First ring  
<On>  
Off  
Speed dial  
#261  
#302  
#331  
30  
15  
58  
*1  
Record greeting  
*3  
*1  
Voice mail  
Save VM access#  
(VM: Voice mail)  
*1  
<On>  
#332  
58  
VM tone detect  
Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
       
Programming  
Sub-menu 1  
Sub-menu 2  
Wallpaper  
Clock  
Settings  
Code  
Display  
<Wallpaper1>  
#181  
#198  
<On>  
Off  
Display color  
<Color1>  
Color2  
#182  
#192  
#191  
*16  
<Multi items>  
Single item  
Display mode  
*17  
<On>  
LCD backlight  
Off  
Handset name  
Display name  
#104  
#105  
42  
42  
On  
<Off>  
Smart function  
key  
#278  
#165  
#214  
16  
Key tone  
<On>  
Off  
Caller ID edit  
(Caller ID number auto  
edit)  
<On>  
Off  
45  
*18  
On  
<Off>  
#200  
#120  
#121  
22  
16  
23  
Auto talk  
*3  
*1  
Pulse  
<Tone>  
Set tel line  
Set dial mode  
*1, *19  
900 ms  
<700 ms>  
600 ms  
400 ms  
300 ms  
250 ms  
200 ms  
160 ms  
110 ms  
100 ms  
90 ms  
Set flash time  
80 ms  
*1, *20  
A<B>  
#122  
#194  
Set line mode  
*1  
<On>  
24  
Call sharing  
Off  
Registration  
Register handset  
#130  
#131  
#680  
42  
42  
*2  
Deregistration  
Customer support  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
                               
Programming  
Sub-menu 1  
Sub-menu 2  
Settings  
Code  
#110  
Change language  
Display  
<English>  
15  
15  
Español  
*1  
<English>  
#112  
Voice prompt  
Español  
Main menu:  
Operation  
Play music”  
Playing music from a Bluetooth device.  
48  
*21  
Main menu:  
Set date & time”  
Sub-menu 1  
Sub-menu 2  
Settings  
Code  
#101  
#720  
*1  
15  
39  
Date and time  
Memo alarm  
Alarm1–5  
Once  
Daily  
Weekly  
<Off>  
Time  
adjustment  
<Caller ID auto>  
Manual  
#226  
*1, *12  
*1 If you program these settings using one of the units, you do not need to program the same  
item using another unit.  
*2 This menu is not displayed when scrolling through the display menus. It is only available in  
direct command code.  
*3 When the cellular line only mode is turned on, these menus are not displayed (page 19).  
*4 This setting is available when you have the key detector (KX-TGA20). Read the installation  
manual for more information on the key detector.  
*5 After the Bluetooth device is paired, the device name is displayed.  
*6 For CELL 1  
*7 For CELL 2  
*8 The preset melodies in this product (Tone 3- Melody 15) are used with permission of  
© 2012 Copyrights Vision Inc.  
*9 The preset melodies in this product are used with the following permission:  
Tone 1and Tone 2: © 2013 Copyrights Vision Inc.  
Tone 5Melody 15: © 2012 Copyrights Vision Inc.  
*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or  
2). If you select a melody, you cannot distinguish lines by their ringers.  
*11 This tone lets you know when you receive an outside call while you are on another line or an  
intercom call. If you select On, the tone sounds 2 times.  
*12 This feature allows the unit to automatically adjust the date and time each time caller  
information including date and time is received.  
To turn this feature on, select Caller ID auto. To turn this feature off, select  
Manual. (Caller ID subscribers only)  
To use this feature, set the date and time first (page 15).  
*13 For models with supplied key detectors, the display shows “1: Detector1”.  
*14 If you register 2 or more key detectors.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
                             
Programming  
*15 If you have 2 or more key detectors.  
*16 You can select to display either a single item or multiple items on one screen at a time for  
the handset menu list, recorded message list, phonebook list, caller list, and redial list. When  
in multiple items display mode, you can switch the screen to confirm the detailed information  
by:  
– pressing MDETAILN, or  
– pressing MMENUN a MbN: Detaila MSELECTN  
*17 You can set the handset display backlight while on charge.  
On: Backlight is on (dimmed).  
Off: Backlight turns off after 10 seconds of charging. Additionally, less power is  
consumed if you leave the handset on the base unit or charger after the battery is fully  
charged.  
*18 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up  
the handset to answer a call, turn off this feature.  
*19 The flash time depends on your telephone exchange or host PBX. Contact your PBX  
supplier if necessary. The setting should stay at 700 msunless pressing MFLASHN fails to  
pick up the waiting call.  
*20 Generally, the line mode setting should not be changed. This setting automatically maintains  
receiver volume at the proper level depending on the current telephone line condition. Set  
the line mode to Aif telephone line condition is not good.  
*21 This menu icon is displayed when the key detector is not registered.  
Daily”  
An alarm sounds daily at the set time.  
Go to step 5.  
Alarm  
An alarm sounds at the set time for 1 minute  
Weekly”  
Alarm sounds weekly at the set time(s).  
and is repeated 5 times at 5 minute intervals  
(snooze function). A text memo can also be  
displayed for the alarm. A total of 5 separate  
alarm times can be programmed for each  
handset. You can set one of 3 different alarm  
options (once, daily, or weekly) for each alarm  
time.  
4
Proceed with the operation according to  
your selection in step 3.  
n Once:  
Enter the desired month and date. a  
MOKN  
Important:  
R Make sure the unit’s date and time setting  
is correct (page 15).  
n Weekly:  
MbN: Select the desired day of the week  
and press MSELECTN. a MOKN  
1
2
MMENUN (right soft key) #720  
5
6
7
Set the desired time.  
Select an alarm by pressing 1 to 5. a  
MSELECTN  
*: Select AMor PM. a MOKN  
3
MbN: Select the desired alarm option. a  
MSELECTN  
Enter a text memo (30 characters max.).  
a MOKN  
8
MbN: Select the desired alarm tone. a  
MSELECTN  
R We recommend selecting a different  
ringer tone from the one used for  
outside calls.  
Off”  
Turns alarm off. Go to step 10.  
Once”  
An alarm sounds once at the set time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
                     
Programming  
9
MbN: Select the desired snooze setting.  
a MSAVEN  
5
Enter the desired hour and minute you  
wish to end this feature.  
10 MSELECTN a MOFFN  
Note:  
6
7
*: Select AMor PM.  
MSAVEN a MOFFN  
R Press MSTOPN to stop the alarm completely.  
R When the handset is in use, the alarm will  
not sound until the handset is in standby  
mode.  
Changing the start and end time  
1
2
MMENUN (right soft key) #237  
R Press any dial key, M  
N, or MSNOOZEN to  
Continue from step 3, “Turning silent  
mode on/off”, page 40.  
stop the sound but keep the snooze  
function activated.  
R If you want to make an outside call when  
the snooze function is activated, please  
stop the snooze function before making the  
call.  
Selecting groups to bypass silent  
mode  
1
2
MMENUN (right soft key) #241  
Select your desired groups by pressing  
1 to 9.  
R “ ” is displayed next to the selected  
group numbers.  
Silent mode  
Silent mode allows you to select a period of  
time during which the handset will not ring for  
outside calls. This feature is useful for time  
periods when you do not want to be disturbed,  
for example, while sleeping. Silent mode can  
be set for each unit.  
R To cancel a selected group, press the  
same dial key again. “ ” disappears.  
3
MSAVEN a MOFFN  
Using the phonebook’s group feature  
Call block  
(page 28), you can also select groups of  
callers whose calls override silent mode and  
ring the handset (Caller ID subscribers only).  
This feature rejects calls from unwanted  
callers (Caller ID subscribers only). The  
following items are available when storing  
phone numbers in the call block list (250 max.).  
Block a single number: The unit  
can reject calls from specific phone  
numbers.  
Important:  
R Make sure the unit’s date and time setting  
is correct (page 15).  
R We recommend turning the base unit ringer  
off (page 34, 35) in addition to turning the  
silent mode on.  
Block range of numbers: The unit  
can reject calls that begin with a number  
stored in the call block list, such as a  
toll-free phone number prefix or certain  
area codes.  
You can also set the unit to reject calls that do  
not have a phone number.  
When a call is received, the unit rings briefly  
while caller information is being received. If  
the caller’s phone number matches an entry in  
the call block list, the unit emits no sound to  
the caller, and disconnects the call.  
R If you have set the alarm, the alarm sounds  
even if the silent mode is turned on.  
Turning silent mode on/off  
1
2
MMENUN (right soft key) #238  
*1  
MbN: Select the desired setting. a  
MSAVEN  
R If you select Off, press MOFFN to  
exit.  
*1 This is called first ring. If you do not want  
the first ring to sound, turn this setting to  
Off(page 41).  
3
Enter the desired hour and minute you  
wish to start this feature.  
4
*: Select AMor PM. a MOKN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
                     
Programming  
n By entering phone numbers:  
Important:  
1
2
MMENUN (right soft key) #217  
R Rejected calls are logged in the caller list.  
MbN: Block a single numbera  
MSELECTN  
Storing unwanted callers  
3
4
MMENUN a MbN: Adda MSELECTN  
Storing a single phone number  
Important:  
Enter the phone number (24 digits max.).  
R To erase a digit, press MCLEARN.  
R We recommend storing 10 digits (including  
the area code). If only 7 digits are stored, all  
numbers that have the same last 7 digits  
will be blocked.  
5
MSAVEN a MOFFN  
Storing a range of numbers  
1
2
MMENUN (right soft key) #217  
n From the caller list:  
When a cellular phone is paired:  
MbN: Block range of numbersa  
MSELECTN  
1
2
MCN CID  
3
4
MMENUN a MbN: Adda MSELECTN  
MbN: Select the entry to be blocked. a  
MMENUN  
Enter the desired number (2-8 digits).  
R To erase a digit, press MCLEARN.  
R To edit the number: MbN: Edita  
MSELECTN  
Press MEDITN repeatedly until the  
phone number is shown in the 10-digit  
format. And then, press * (Save). Go  
to step 4.  
5
MSAVEN a MOFFN  
Blocking incoming calls that  
have no phone number  
You can reject calls when no phone number is  
provided, such as private callers or out of area  
calls.  
3
4
5
6
MbN: Save caller IDa MSELECTN  
MbN: Call blocka MSELECTN  
MbN: Yesa MSELECTN  
1
2
MMENUN (right soft key) #240  
Edit the phone number if necessary (24  
digits max.).  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
7
MSAVEN a MOFFN  
When a cellular phone is not paired:  
Note:  
1
2
MCN CID  
R When the unit receives a cellular call  
without a phone number, the call may not  
be rejected.  
MbN: Select the entry to be blocked. a  
MMENUN  
R To edit the number: MbN: Edita  
MSELECTN  
Setting the first ring for the call  
block list  
If you do not want the first ring from a number  
on the call block list to sound, turn the first ring  
setting to Off. The default setting is On.  
Press MEDITN repeatedly until the  
phone number is shown in the 10-digit  
format. And then, press MSAVEN. Go to  
step 4.  
3
4
5
6
MbN: Save caller IDa MSELECTN  
MbN: Call blocka MSELECTN  
MbN: Yesa MSELECTN  
1
2
MMENUN (right soft key) #173  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
Edit the phone number if necessary (24  
digits max.).  
7
MSAVEN a MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
         
Programming  
3
MSAVEN a MOFFN  
Viewing/editing/erasing call  
block numbers  
Displaying the handset name  
You can select whether or not the handset  
name is displayed in standby mode. The  
default setting is Off.  
1
2
MMENUN (right soft key) #217  
MbN: Block a single numberor  
Block range of numbersa  
MSELECTN  
1
2
MMENUN (right soft key) #105  
3
4
MbN: Select the desired entry.  
R To exit, press MOFFN.  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
To edit a number:  
MEDITN a Edit the number. a MSAVEN  
a MOFFN  
To erase a number:  
MERASEN a MbN: Yesa MSELECTN  
Registering a unit  
a MOFFN  
Operating additional units  
Additional handsets  
Note:  
R When editing, press the desired dial key to  
add, MCLEARN to erase.  
Up to 6 handsets can be registered to the  
base unit.  
Erasing all call block numbers  
Important:  
R See page 4 for information on the available  
model.  
1
2
MMENUN (right soft key) #217  
MbN: Block a single numberor  
Block range of numbersa  
MSELECTN  
Registering a handset to the  
base unit  
The supplied handset and base unit are  
pre-registered. If for some reason the handset  
is not registered to the base unit, re-register  
the handset.  
3
MMENUN a MbN: Erase alla  
MSELECTN  
4
5
MbN: Yesa MSELECTN  
MbN: Yesa MSELECTN a MOFFN  
1
Handset:  
MMENUN (right soft key) #130  
Other programming  
2
Base unit:  
Press and hold M N for about 5 seconds.  
R If all registered handsets start ringing,  
press M N again to stop, then repeat  
this step.  
Changing the handset name  
The default handset name is Handset 1to  
Handset 6. You can customize the name  
of each handset (“Bob”, “Kitchen”, etc.). This is  
useful when you make intercom calls between  
handsets. To display the handset name in  
standby mode, turn on the handset name  
display feature (page 42).  
3
Handset:  
Press MOKN, then wait until a long beep  
sounds.  
Deregistering a handset  
1
2
MMENUN (right soft key) #104  
A handset can cancel its own registration to  
the base unit, or other handsets registered to  
Enter the desired name (10 characters  
max.).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
                   
Programming  
the same base unit. This allows the handset to  
end its wireless connection with the system.  
1
MMENUN (right soft key) #131  
R All handsets registered to the base unit  
are displayed.  
2
3
MbN: Select the handset you want to  
cancel. a MSELECTN  
MbN: Yesa MSELECTN a MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
Caller ID Service  
Talking Caller ID  
Using Caller ID service  
Important:  
Handset / Base unit  
This feature lets you know who is calling  
without looking at the display.  
To use this feature, you must:  
– subscribe to a Caller ID service of your  
service provider/telephone company.  
– turn this feature on (page 36).  
R This unit is Caller ID compatible. To use  
Caller ID features, you must subscribe to a  
Caller ID service. Contact your service  
provider/telephone company for details.  
When caller information is received, the  
handsets and/or base unit announce the  
caller’s name or phone number received from  
your service provider/telephone company  
following every ring.  
The unit announces in English only.  
R Name pronunciation may vary. This feature  
may not pronounce all names correctly.  
R Caller ID service has a limit of how many  
characters can be displayed. If the caller’s  
name is too long, the unit may not be able  
to display or announce the entire name.  
Caller ID features  
When an outside call is being received, the  
caller information is displayed.  
Caller information for the last 50 callers is  
logged in the caller list from the most recent  
call to the oldest.  
R If the unit cannot receive caller information,  
the following is displayed:  
Out of area: The caller dials from  
an area which does not provide a Caller  
ID service.  
Private caller: The caller  
requests not to send caller information.  
Long distance: The caller makes a  
long distance call.  
R If the unit is connected to a PBX system,  
caller information may not be properly  
received. Contact your PBX supplier.  
Phonebook name announcement  
When caller information is received and it  
matches a phone number stored in the  
phonebook, the stored name in the  
phonebook is announced.  
Missed calls  
Caller list  
Important:  
If a call is not answered, the unit treats it as a  
missed call. The display shows Missed  
call.  
R Make sure the unit’s date and time setting  
is correct (page 15).  
Note:  
R Even when there are unviewed missed  
calls, Missed calldisappears from the  
standby display if the following operation is  
performed by one of the units:  
– A handset is replaced on the base unit  
or charger.  
Viewing the caller list and calling  
back  
n Using a cellular line  
1
2
MCN CID  
– Pressing MOFFN on a handset.  
Press MCN to search from the most recent  
call, or MDN to search from the oldest call.  
Phonebook name display  
3
MMENUN a MbN: Call back (Cell)”  
a MSELECTN  
R To exit, press MOFFN.  
R The unit starts dialing when:  
– only 1 cellular phone is paired.  
When caller information is received and it  
matches a phone number stored in the  
phonebook, the stored name in the  
phonebook is displayed and logged in the  
caller list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
                     
Caller ID Service  
– a specific line is set to make cellular  
calls (page 20).  
4
5
Press MEDITN repeatedly until the phone  
number is shown in the desired format.  
4
MbN: Select the desired cellular phone. a  
MSELECTN  
n Using the landline  
Using a cellular line:  
step 2, “Making cellular calls”, page 21.  
Using the landline:  
1
2
MCN CID  
M
N
Press MCN to search from the most recent  
call, or MDN to search from the oldest call.  
3
To call back, press M  
To exit, press MOFFN.  
N.  
Caller ID number auto edit feature  
Once you call back an edited number, the unit  
which was used to call back remembers the  
area code and format of the edited number.  
The next time someone calls from the same  
area code, caller information is customized by  
the unit as follows:  
– When the call is being received, the Caller  
ID number is displayed in the same format  
as the edited number.  
– After the call has ended, the caller’s phone  
number is displayed in the same format as  
the edited number, when reviewed from the  
caller list.  
For example, you can use this feature to set  
the unit to ignore the area code of callers in  
your area, so that you can call these local  
numbers using caller information without  
dialing the area code.  
Note:  
R In step 2, to see the detailed information  
when in multiple display mode:  
MMENUN a MbN: Detaila MSELECTN  
R If the entry has already been viewed or  
answered, “ ” is displayed.  
R
or  
indicates the caller information  
was received from the cellular line.  
Using the Smart function key  
When Missed callis displayed and the  
indicator flashes slowly, there are missed  
calls.  
N in step 1 on “Viewing the caller  
list and calling back”, page 44.  
To activate this feature, you must edit an entry  
in the caller list, then call that number. After  
that, phone numbers from that caller’s area  
code are edited automatically.  
This feature can be set for each unit  
(page 37). The default setting is On.  
“Setting the Smart function key”, page 16.  
R If the handset is placed on the base unit or  
charger, you need to lift up the handset to  
view the caller list after pressing M  
N.  
R When the unit has new messages, new  
voice mail messages, and missed calls, the  
unit can be operated to play the new  
messages first, play the new voice mail  
messages next, and then show the missed  
calls.  
Note:  
R Phone numbers from the 4 most recently  
edited area codes are automatically edited.  
Erasing selected caller  
information  
Editing a caller’s phone number  
1
2
3
4
MCN CID  
You can edit a phone number in the caller list  
by removing its area code and/or the long  
distance code “1”.  
MbN: Select the desired entry.  
MERASEN a MbN: Yesa MSELECTN  
MOFFN  
1
2
3
MCN CID  
MbN: Select the desired entry. a MMENUN  
MbN: Edita MSELECTN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
           
Caller ID Service  
Erasing all caller information  
1
2
3
MCN CID  
MERASEN a MbN: Yesa MSELECTN  
MOFFN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Using Bluetooth Devices  
Manual: Copy entries you selected.  
R Select modemenu is displayed  
only when the cellular phone supports  
PBAP (Phone Book Access Profile) for  
Bluetooth connection.  
R Some cellular phones may require you  
to perform an operation on the cellular  
phone even if you select Auto.  
Copying phonebook from a  
cellular phone (phonebook  
transfer)  
You can copy phonebook entries from the  
paired cellular phones or other cellular phones  
(not paired) to the unit’s phonebook. A cellular  
phone must be compatible with Bluetooth  
wireless technology.  
4
Cellular phone:  
Follow the instructions of your cellular  
phone to copy phonebook entries.  
R For other cellular phones (not paired),  
you need to search for and select the  
base unit. The Bluetooth PIN (default:  
0000) may be required. If your  
cellular phone shows PassKey  
confirmation on its display, follow the  
directions to proceed.  
Important:  
R Your cellular phone must support Phone  
Book Access Profile (PBAP) or Object  
Push Profile (OPP) specification.  
R The unit can copy up to 3 phone numbers  
of a copied entry for each entry. If an entry  
has 4 or more phone numbers, the phone  
numbers will be copied as 2 entries with the  
same name (up to 6 numbers in total).  
R If a phonebook entry includes additional  
data such as a picture, that entry may fail to  
copy to the base unit.  
R The entries being copied are displayed  
on the handset.  
5
6
Handset:  
Wait until Completedis displayed.  
R You can continue copying other entries  
if necessary.  
R If your cellular phone includes international  
call entries, set the conversion codes  
before copying (page 47).  
Handset: MOFFN  
Note:  
1
2
Handset:  
MMENUN (right soft key) #618  
R Some copied entries may have characters  
which do not exist in the character table  
(page 28). These characters can be  
displayed but cannot be entered when  
editing an entry.  
R The unit does not support some characters.  
If a copied entry includes those characters,  
they are replaced with other available  
characters or “H”.  
Handset:  
To copy from paired cellular phones:  
MbN: Select the desired cellular phone. a  
MSELECTN  
R Copied items are stored to the group  
(Cell 1or Cell 2) which the  
cellular phone is paired to.  
To copy from other cellular phones  
(not paired):  
MbN: Other cella MSELECTN a  
MbN: Select the group you want to copy to.  
a MSELECTN  
R If you receive a call while copying  
phonebook entries, the copying procedure  
stops. Try again after finishing the call.  
Setting conversion codes  
3
When “Use the cell to  
transfer phone book” is displayed:  
Go to step 4.  
When “Select mode” menu is  
displayed:  
You must first set the following 3 dialing codes  
before transferring the phonebook from your  
cellular phone (each 4 digits max.).  
International code: An international  
prefix used when you make an international  
call.  
MbN: Select Autoor Manual. a  
MSELECTN  
Auto: Download all entries from the  
Country code: Your country code for  
cellular phone automatically. Go to step 5.  
international calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
         
Using Bluetooth Devices  
Trunk prefix: A trunk prefix; the initial  
digit(s) to be dialed in a domestic call, prior  
to the area code.  
compatible devices, please visit the  
following web site.  
R If there is only 1 Bluetooth device paired to  
the base unit, that Bluetooth device is  
automatically set to be used for playing  
music.  
1
2
MMENUN (right soft key)  
To store International code:  
#117  
To store Country code: #118  
To store Trunk prefix: #119  
1
2
MMENUN (right soft key) #606  
MbN: Select the desired Bluetooth device.  
a MSAVEN a MOFFN  
3
4
Enter the desired number. a MSAVEN  
MOFFN  
Note:  
Playing music through the base  
unit’s speaker  
R After you copy the entries, confirm that the  
numbers were transferred correctly.  
1
Bluetooth device:  
Use your Bluetooth device’s media player  
app to play music.  
Playing music from a  
Bluetooth device  
R The music is played through the base  
unit’s speaker.  
R
is displayed on the handset.  
This feature allows you to:  
2
Base unit:  
Adjust the speaker volume by pressing  
MjN or MkN.  
– use a Bluetooth device to play music  
through the base unit’s speaker.  
– use the handset as a remote control when  
playing music from a Bluetooth device  
through the base unit’s speaker.  
Note:  
R If the unit is not selected as your Bluetooth  
device’s audio output device, change the  
setting.  
R Refer to the instructions provided with your  
Bluetooth device as needed.  
R If the base unit and Bluetooth device are  
not connected, you cannot play music  
through the base unit’s speaker. Operate  
Important:  
R This feature is compatible with Bluetooth  
devices that support the Advanced Audio  
Distribution Profile (A2DP) specification,  
including iPhone and Android devices.  
R Your Bluetooth device must support the  
Audio Video Remote Control Profile  
(AVRCP ver 1.3 or later) specification to  
allow the handset to display music  
information.  
R You must select a Bluetooth device to be  
used with this feature beforehand  
(page 48).  
the Bluetooth device or press M N on the  
base unit and wait for a few seconds for the  
base unit and Bluetooth device to connect,  
then repeat from step 1.  
R While using the handset as a remote  
control, information such as the song title is  
displayed on the handset. Unsupported  
characters are displayed as G. Depending  
on the audio file and media app, this  
information may not be displayed. If the  
information is too long to be displayed by  
the handset, the handset may not be able  
to display all of the information.  
R When you are finished listening to music,  
use your Bluetooth device to stop playback.  
R Depending on the media player app, music  
may not be heard through your Bluetooth  
Selecting a Bluetooth device to  
be used for playing music  
You can select 1 Bluetooth device to be used  
to play music through the base unit’s speaker.  
Important:  
R Your Bluetooth device must support music  
playback. For more details and a list of  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
         
Using Bluetooth Devices  
device and the base unit’s speaker, but the  
CELL indicator on the base unit may flash.  
R When you use the handset as a remote  
control, the base unit volume cannot be  
adjusted by pressing the base unit’s volume  
buttons.  
Using the handset as a remote  
control  
Important:  
Text message (SMS) alert  
R Only 1 handset can be used as a remote  
control at a time.  
R Confirm in advance that your Bluetooth  
device’s media player app is running.  
The handset can notify you when a cellular  
phone that is paired to the base unit receives  
a text message. The handset can notify you  
by briefly displaying a message, by sounding  
a ringer tone or melody, and by  
1
2
MMENUN (right soft key) a  
a
announcement. The announcement is in  
English only.  
MSELECTN  
R The music is played through the base  
unit’s speaker.  
Important:  
Perform the following operations as  
desired.  
R To use the text message alert feature, you  
need to pair your cellular phone to the base  
unit (page 17).  
R Your cellular phone must support Message  
Access Profile (MAP) specification. We  
recommend that you confirm if your cellular  
phone supports MAP in advance.  
R For more details and a list of compatible  
devices, please visit the following web site.  
Key  
MDN or MCN  
Operation  
Adjust the base unit’s  
speaker volume  
MPAUSEN  
MPLAYN  
MFN  
Pause playback  
Resume playback  
Replay the current or  
previous track  
For those whose devices do not support  
the Message Access Profile (MAP):  
By installing the app “Text Message Alert”,  
you can use the text message alert feature.  
Please visit our Web site:  
MEN  
Skip to the next track  
Rewind  
MFN (press  
and hold)  
MEN (press  
Fast-forward  
and hold)  
MSTOPN  
Stop playback  
MOFFN  
Exit remote control mode  
Note:  
R Refer to your cellular phone operating  
instructions for information on how to install  
applications.  
R For details about Bluetooth device  
operations, refer to the instructions  
provided with your Bluetooth device as  
needed.  
R When you are finished playing music, use  
your Bluetooth device to select the  
appropriate audio output device.  
R If you do not hear music through the base  
unit’s speaker, make sure the media player  
app on your Bluetooth device is running.  
R The handset may not be able to control  
some media player apps.  
Setting text message (SMS) alert  
The following settings are available. The  
default is On(no announce).  
On(no announce): The handset  
notifies you but does not make an  
announcement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
       
Using Bluetooth Devices  
On(with name): The handset notifies  
you and announces the name of the  
message sender.  
Off: The handset does not notify you.  
Your cellular phone  
In order to use the text message alert feature,  
you may need to enable your cellular phone’s  
Bluetooth notification feature.  
Handset  
n Turning text message (SMS) alert on/off  
1
For CELL 1: MMENUN (right soft key)  
#6101  
For CELL 2: MMENUN (right soft key)  
#6102  
2
3
4
MbN: On/Offa MSELECTN  
MbN: Select the desired setting.  
MSAVEN a MOFFN  
n Selecting the alerting tone  
1
For CELL 1: MMENUN (right soft key)  
#6101  
For CELL 2: MMENUN (right soft key)  
#6102  
2
3
4
MbN: Alert tonea MSELECTN  
MbN: Select the desired setting.  
MSAVEN a MOFFN  
Note:  
R If the text message alert feature does not  
work, you must turn on notifications in the  
Bluetooth settings of your cellular phone.  
Then, unplug the base unit’s AC adaptor  
and reconnect it to activate the text  
message alert feature. For instructions on  
how to do this, visit our Web site:  
sms/  
R The unit announces the name or phone  
number depending on your cellular phone.  
R This feature may not pronounce all names  
correctly.  
R Text message alerts are not logged in the  
caller list of your unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
 
Answering System for Landline  
2
MOFFN  
Note:  
Answering system for  
landline  
The answering system can answer and record  
calls for you when you are unavailable to  
answer the phone.  
R When the answering system is turned on,  
is displayed on the handset.  
indicator on the base unit lights up.  
You can also set the unit to play a greeting  
message but not to record caller messages by  
selecting Greeting onlyas the recording  
time setting (page 56).  
Greeting message  
When the unit answers a call, a greeting  
message is played to callers.  
You can use either:  
– your own greeting message  
– a pre-recorded greeting message  
Important:  
R Make sure the unit’s date and time setting  
is correct (page 15).  
Memory capacity (including your  
greeting message)  
The total recording capacity is about 18  
minutes. A maximum of 64 messages can be  
recorded.  
Recording your greeting message  
1
2
3
MMENUN (right soft key) #302  
MbN: Yesa MSELECTN  
After a beep sounds, hold the handset  
about 20 cm (8 inches) away and speak  
clearly into the microphone (2 minutes  
max.).  
Note:  
R When message memory is full:  
Messages fullis shown briefly on  
the handset display.  
4
Press MSTOPN to stop recording. a  
MOFFN  
– The  
indicator on the base unit  
flashes quickly. (If there are new  
messages recorded, the indicator  
flashes slowly until you have listened to  
the new messages.)  
Using a pre-recorded greeting  
message  
– If you use the pre-recorded greeting  
message, the unit automatically switches  
to another pre-recorded greeting  
message asking callers to call again  
later.  
– If you recorded your own greeting  
message, the same message is still  
announced to callers even though their  
messages are not recorded.  
The unit provides 2 pre-recorded greeting  
messages:  
– If you erase or do not record your own  
greeting message, the unit plays a  
pre-recorded greeting asking callers to  
leave a message.  
– If the message recording time (page 56)  
is set to Greeting only, callers’  
messages are not recorded and the unit  
plays a different pre-recorded greeting  
message asking callers to call again.  
Turning the answering  
system on/off  
Resetting to a pre-recorded greeting  
message  
1
To turn on:  
MMENUN (right soft key) #327  
To turn off:  
If you want to use a pre-recorded greeting  
message once you record your own greeting  
message, you need to erase your own  
greeting message.  
MMENUN (right soft key) #328  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
                   
Answering System for Landline  
1
2
MMENUN (right soft key) #304  
MMENUN a MbN: Erasea  
MSELECTN a MbN: Yesa  
MSELECTN  
MYESN a MOFFN  
3
Note:  
When finished, press MOFFN.  
Playing back the greeting  
message  
R If the item has already been heard, “ ” is  
displayed.  
R Messageis displayed in the message list  
1
2
MMENUN (right soft key) #303  
To exit, press MOFFN.  
if the unit cannot receive caller information.  
Operating the answering system  
MMENUN (right soft key) a  
a MSELECTN  
Listening to messages  
When new messages have been recorded:  
New messageis displayed on the  
handset.  
Key  
Operation  
MDN or MCN  
Adjust the receiver/speaker  
volume (during playback)  
indicator on the base unit flashes  
slowly.  
1 or MFN  
Repeat message (during  
*1  
playback)  
1
To listen to new messages:  
MMENUN (right soft key) #323  
To listen to all messages:  
2 or MEN  
Skip message (during  
*2  
playback)  
MMENUN (right soft key) #324  
3
Enter the Settingsmenu  
Play new messages  
2
When finished, press MOFFN.  
4
Note:  
5
Play all messages  
R To switch to the receiver, press M  
R You can also use the MPLAYN soft key, if  
displayed, to play new messages.  
N.  
6
Play greeting message  
Record greeting message  
Turn answering system on  
76  
8
Using the Smart function key  
*3  
MPAUSEN  
Pause message  
When New messageis displayed and the  
indicator flashes slowly, there are new  
messages.  
9 or  
MSTOPN  
Stop recording  
Stop playback  
0
Turn answering system off  
N in step 1 on “Listening to  
*4  
Erase currently playing  
message  
*4  
messages”, page 52.  
“Setting the Smart function key”, page 16.  
*5  
*6  
Erase all messages  
Reset to a pre-recorded  
greeting message  
Listening to messages from the  
message list  
*1 If pressed within the first 5 seconds of a  
message, the previous message is  
played except when playing back from  
the message list.  
*2 When you play a message from the  
message list, the unit stops message  
playback and the display goes back to the  
message list.  
You can select the item to play back.  
1
2
MMENUN (right soft key) #329  
MbN: Select the desired item from the  
message list. a MPLAYN  
R You can erase the selected message  
as follows:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
                         
Answering System for Landline  
*3 To resume playback:  
new messages are recorded. The base unit  
beeps 2 times every minute until you listen to  
the messages, if the Base unit beep”  
setting is turned on. The default setting is  
Off.  
MbN: Playbacka MSELECTN  
*4 You can also erase as follows:  
MPAUSEN a MbN: Erasea  
MSELECTN a MbN: Yesa MSELECTN  
1
2
MMENUN (right soft key) #339  
Calling back (Caller ID subscribers  
only)  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
n Using a cellular line:  
1
2
Press MPAUSEN during playback.  
New message alert by a call  
MbN: Call back (Cell)a  
MSELECTN  
R The unit starts dialing when:  
– only 1 cellular phone is paired.  
– a specific line is set to make  
cellular calls (page 20).  
This feature allows you to receive a  
notification by phone when new messages are  
recorded. The base unit calls a phone number  
you specify. You can then operate the  
answering system remotely to listen to the  
new message.  
To use this feature, you must:  
– store a phone number to which the unit  
makes the call to.  
– turn on the new message alert setting.  
After you answer the new message alert call,  
you can listen to messages from that call  
(page 54).  
3
MbN: Select the desired cellular phone.  
a MSELECTN  
n Using the landline:  
1
2
Press MPAUSEN during playback.  
MbN: Call backa MSELECTN  
Important:  
Editingthe numberbefore callingback  
R A new message alert is stopped 1 minute  
after the unit starts to call. The unit will not  
retry the call even if the call is not answered.  
1
2
3
Press MPAUSEN during playback.  
MbN: Edita MSELECTN  
Press MEDITN repeatedly until the phone  
number is shown in the desired format  
Storing a phone number to which the  
unit makes an alert call  
(page 45). a M  
N
R To call back using a cellular line,  
continue from step 2, “Making cellular  
calls”, page 21.  
n From the phonebook:  
1
2
MMENUN (right soft key) #338  
MbN: Notification toa  
MSELECTN a MADDN  
Erasing all messages  
3
4
MbN: Phonebooka MSELECTN  
1
2
MMENUN (right soft key) #325  
MbN: Select the desired phonebook  
entry. a MSELECTN  
MbN: Yesa MSELECTN a MOFFN  
5
MbN: Select the desired phone number.  
a MSAVEN a MOFFN  
Advanced new message  
alerting features  
n By entering a phone number:  
1
2
MMENUN (right soft key) #338  
MbN: Notification toa  
MSELECTN a MADDN  
Audible message alert  
3
MbN: Manuala MSELECTN  
This feature allows the base unit to beep to  
inform you of a new message arrival when  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
               
Answering System for Landline  
Activate: You must enter your remote  
access code and then press 4 to play new  
message.  
4
5
Enter the desired name (16 characters  
max.). a MOKN  
Enter the desired number (24 digits  
max.). a MOKN a MSELECTN a  
MOFFN  
1
2
3
MMENUN (right soft key) #338  
MbN: Remote codea MSELECTN  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
Turning on/off the new message alert  
setting  
Listening to messages  
1
2
3
MMENUN (right soft key) #338  
After you answer the new message alert, you  
can listen to the messages as follows.  
MbN: On/Offa MSELECTN  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
n When the remote access code is set to  
Inactivate”:  
Press 4 to play the new message during  
the announcement.  
Editing the set phone number  
1
2
3
4
MMENUN (right soft key) #338  
n When the remote access code is set to  
Activate”:  
MbN: Notification toa MSELECTN  
MMENUN a MbN: Edita MSELECTN  
1
Enter the remote access code  
(page 54) during the announcement.  
Edit the name if necessary (16 characters  
max.). a MOKN  
2
Press 4 to play the new message.  
Note:  
5
Edit the phone number if necessary (24  
digits max.). a MOKN a MSELECTN a  
MOFFN  
R Within 10 seconds after listening to new  
messages, you can press #9 during the  
call to turn off the new message alert by a  
call feature.  
R Even if the unit makes a new message alert  
call, the handset redial list does not show  
the record.  
Erasing the set phone number  
1
2
3
4
MMENUN (right soft key) #338  
MbN: Notification toa MSELECTN  
MMENUN a MbN: Erasea MSELECTN  
MbN: Yesa MSELECTN a MOFFN  
R The new message alert setting is  
turned off.  
Remote operation  
Using a touch-tone phone, you can call your  
phone number from outside and access the  
unit to listen to messages or change  
answering system settings. The unit’s voice  
guidance prompts you to press certain dial  
keys to perform different operations.  
Activating/inactivating the remote  
access code to play messages  
If you activate this feature, you must enter the  
remote access code (page 54) to play the  
new message from the new message alert  
call. This is so that unauthorized parties  
cannot listen to your messages. The default  
setting is Inactivate.  
Inactivate: You can listen to the  
message by pressing 4 to play new  
messages (without entering the remote  
access code).  
Remote access code  
A 3-digit remote access code must be entered  
when operating the answering system  
remotely. This code prevents unauthorized  
parties from listening to your messages  
remotely. The default setting is 111.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
         
Answering System for Landline  
Important:  
Remote commands  
You can press dial keys to access certain  
answering system functions without waiting for  
the voice guidance to prompt you.  
R To prevent unauthorized access to this  
product, we recommend that you regularly  
change the remote code.  
1
2
MMENUN (right soft key) #306  
Key  
Operation  
Enter the desired 3-digit remote access  
code.  
1
Repeat message (during  
playback)  
*1  
3
MSAVEN a MOFFN  
2
4
5
9
Skip message (during playback)  
Play new messages  
Deactivating remote operation  
Press * in step 2 on “Remote access code”,  
page 54.  
R The entered remote access code is deleted.  
Play all messages  
*2  
Stop playback  
*3  
Start voice guidance  
0
Turn answering system off  
Erase currently playing message  
Erase all messages  
Using the answering system  
remotely  
*4  
*5  
*#  
1
2
3
Dial your landline phone number from a  
touch-tone phone.  
End remote operation  
(or hang up)  
After the greeting message starts, enter  
your remote access code.  
*1 If pressed within the first 5 seconds of a  
message, the previous message is  
played.  
*2 For English voice guidance only  
*3 For Spanish voice guidance only  
Follow the voice guidance prompts as  
necessary or control the unit using  
remote commands (page 55).  
4
When finished, hang up.  
Turning on the answering system  
remotely  
Voice guidance  
n When the English voice guidance is  
selected  
During remote operation, the unit’s voice  
guidance starts and prompts you to press  
1 to perform a specific operation, or press  
2 to listen to more available operations.  
1
2
3
Dial your phone number from a  
touch-tone phone.  
Let the phone ring 15 times.  
R A long beep is heard.  
Enter your remote access code within 10  
seconds after the long beep.  
n When the Spanish voice guidance is  
selected  
To start the voice guidance, press 9. The  
voice guidance announces the available  
remote commands (page 55).  
R The greeting message is played back.  
R You can either hang up, or enter your  
remote access code again and begin  
remote operation (page 54).  
Note:  
R If you do not press any dial keys within 10  
seconds after a voice guidance prompt, the  
unit disconnects your call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
                 
Answering System for Landline  
and unlimited local/regional/long distance  
calls, please note the following:  
Answering system settings  
R To use the voice mail service provided by  
your service provider/telephone company  
rather than the unit’s answering system,  
turn off the answering system (page 51).  
R To use this unit’s answering system rather  
than the voice mail service provided by  
your service provider/telephone company,  
please contact your service provider/  
telephone company to deactivate your  
voice mail service.  
If your service provider/telephone company  
cannot do this:  
– Set this unit’s Ring countsetting so  
that this unit’s answering system  
answers calls before the voice mail  
service of your service provider/  
telephone company does. It is necessary  
to check the number of rings required to  
activate the voice mail service provided  
by your service provider/telephone  
company before changing this setting.  
– Change the number of rings of the voice  
mail service so that the answering  
system can answer the call first. To do  
so, contact your service provider/  
telephone company.  
Call screening  
Handset / Base unit  
While a caller is leaving a message, you can  
listen to the call through the unit’s speaker.  
To adjust the speaker volume, press MDN or  
MCN on the handset, or press MjN or MkN on  
the base unit repeatedly.  
You can answer the call by pressing M  
N on  
the handset or MZN on the base unit.  
Call screening can be set for each unit. The  
default setting is On.  
1
2
For handset setting: MMENUN (right soft  
key) #310  
For base unit setting: MMENUN (right  
soft key) #*310  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
Number of rings before the unit  
answers a call  
You can change the number of times the  
phone rings Ring countbefore the unit  
answers calls. You can select 2 to 7 rings, or  
Toll saver.  
Caller’s recording time  
You can change the maximum message  
recording time allowed for each caller. The  
default setting is 3 min.  
The default setting is 4 rings.  
Toll saver: The unit’s answering system  
answers at the end of the 2nd ring when new  
messages have been recorded, or at the end  
of the 5th ring when there are no new  
messages. If you call your phone from outside  
to listen to new messages (page 55), you  
know that there are no new messages when  
the phone rings for the 3rd time. You can then  
hang up without being charged for the call.  
1
2
MMENUN (right soft key) #305  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
Selecting “Greeting only”  
You can select Greeting onlywhich sets  
the unit to announce a greeting message to  
callers but not record messages.  
“Caller’s recording time”, page 56.  
1
2
MMENUN (right soft key) #211  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
Note:  
For voice mail service subscribers  
R When you select Greeting only:  
– If you do not record your own message,  
the unit will play the pre-recorded  
If you subscribe to a flat-rate service package  
that includes Caller ID, call waiting, voice mail,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
                   
Answering System for Landline  
greeting-only message asking callers to  
call again later.  
– If you use your own message, record the  
greeting-only message asking callers to  
call again later (page 51).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
Useful Information  
Example:  
Voice mail service for  
landline  
Voice mail is an automatic answering service  
offered by your service provider/telephone  
company. After you subscribe to this service,  
your service provider/telephone company’s  
voice mail system answers calls for you when  
you are unavailable to answer the phone or  
when your line is busy. Messages are  
recorded by your service provider/telephone  
company, not your telephone. Please contact  
your service provider/telephone company for  
details of this service.  
1-222-333-4444  
PPPP  
8888  
VM access  
number  
Pauses Password  
To erase the voice mail access  
number  
1
2
MMENUN (right soft key) #331  
Press and hold MCLEARN until all digits  
are erased. a MSAVEN a MOFFN  
Important:  
Voice mail (VM) tone detection  
R To use the voice mail service provided by  
your service provider/telephone company  
rather than the unit’s answering system,  
turn off the answering system (page 51).  
For details, see page 56.  
Your service provider/telephone company  
sends special signals (sometimes called  
“voice mail tones” or “stutter tones”) to the unit  
to let you know you have new voice mail  
messages. If you hear a series of dial tones  
followed by a continuous dial tone after you  
Storing the voice mail (VM)  
access number  
In order to listen to your voice mail messages,  
you must dial your service provider/telephone  
company’s voice mail access number. Once  
you have stored your voice mail access  
number, you can dial it automatically  
(page 58).  
press M  
N, you have new voice mail  
messages. Soon after you hang up a call or  
after the phone stops ringing, your unit checks  
the phone line to see if new voice mail  
messages have been recorded.  
Turn this feature off when:  
– You do not subscribe to voice mail service.  
– Your service provider/telephone company  
does not send voice mail tones.  
1
2
MMENUN (right soft key) #331  
– Your phone is connected to a PBX.  
If you are not sure which setting is required,  
contact your service provider/telephone  
company.  
Enter your access number (24 digits  
max.). a MSAVEN a MOFFN  
Note:  
R When storing your voice mail access  
number and your mailbox password, press  
MDN (Pause) to add pauses (page 22)  
between the access number and the  
password as necessary. Contact your  
service provider/telephone company for the  
required pause time.  
Turning VM tone detection on/off  
The default setting is On.  
1
2
MMENUN (right soft key) #332  
MbN: Select the desired setting. a  
MSAVEN a MOFFN  
Listening to voice mail messages  
The unit lets you know that you have new  
voice mail messages in the following way:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
           
Useful Information  
Voice mail msg. via phone co.”  
is displayed if message indication service is  
available.  
1
MMENUN (right soft key) a  
MSELECTN  
a
R The speakerphone turns on.  
2
3
Follow the pre-recorded instructions.  
When finished, press MOFFN.  
Note:  
R You can also use the MACCESSN soft key,  
if displayed, to play new voice mail  
messages.  
R If the handset still indicates there are new  
messages even after you have listened to  
all new messages, turn it off by pressing  
and holding # until the handset beeps.  
Using the Smart function key  
When Voice mail msg. via phone  
co.is displayed and the  
indicator  
flashes slowly, there are new voice mail  
messages.  
N in step 1 on “Listening to voice  
mail messages”, page 58.  
the Smart function key”, page 16.  
R If the voice mail (VM) access number is not  
stored, the  
indicator does not flash.  
R When the unit has new messages, new  
voice mail messages, and missed calls, the  
unit can be operated to play the new  
messages first, play the new voice mail  
messages next, and then show the missed  
calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
   
Useful Information  
Error messages  
Display message  
Cause/solution  
Ask phone  
R You have not stored the voice mail access number.  
company for  
VM access #  
Store the number (page 58).  
Base no power  
or  
No link to base.  
Reconnect main  
base AC adaptor.  
R The handset has lost communication with the base  
unit. Move closer to the base unit and try again.  
R Unplug the base unit’s AC adaptor to reset the unit.  
Reconnect the adaptor and try again.  
R The handset’s registration may have been canceled.  
Re-register the handset (page 42).  
Busy  
R No cellular phone is paired to the base unit. Pair a  
cellular phone (page 17).  
R The called unit is in use.  
R Other units are in use and the system is busy. Try  
again later.  
R The handset you are using is too far from the base  
unit. Move closer and try again.  
R When you tried to use the handset as a remote  
control when playing music from a Bluetooth device,  
another handset user was already performing the  
same operation.  
Check tel line  
R The supplied telephone line cord has not been  
connected yet or not connected properly. Check the  
connections (page 10).  
R If you do not connect the telephone line cord and use  
only cellular lines, set the cellular line only mode  
(page 19).  
Error!!  
R Recording was too short. Try again.  
R Someone is using a cellular line. Try again later.  
R The phonebook copy is incomplete (page 47). The  
cellular phone is disconnected from the base unit.  
Make sure that other Bluetooth devices are not  
connected to the cellular phone, and try again.  
R When you tried to play music using a Bluetooth  
device, the device was not connected to the base  
unit.  
Failed  
R Although the unit tried to connect to the cellular  
phone, the connection has been failed.  
– Someone is using a cellular line. Try again later.  
– Make sure that the cellular phone is not  
connected to other Bluetooth devices.  
Invalid  
R There is no handset registered to the base unit  
matching the handset number you entered.  
R The handset is not registered to the base unit.  
Register the handset (page 42).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
   
Useful Information  
Display message  
Cause/solution  
Requires  
subscription  
to Caller ID.  
R You must subscribe to a Caller ID service. Once you  
receive caller information after subscribing to a Caller  
ID service, this message will not be displayed.  
Use  
rechargeable  
battery.  
R A wrong type of battery such as Alkaline or  
Manganese was inserted. Use only the rechargeable  
Ni-MH batteries noted on page 3, 7.  
Troubleshooting  
If you still have difficulties after following the instructions in this section, disconnect the base unit’s  
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,  
and then insert the batteries into the handset again.  
General use  
Problem  
Cause/solution  
The handset does not turn on  
even after installing charged  
batteries.  
R Place the handset on the base unit or charger to turn on  
the handset.  
The unit does not work.  
R Make sure the batteries are installed correctly (page 10).  
R Fully charge the batteries (page 10).  
R Check the connections (page 10).  
R Unplug the base unit’s AC adaptor to reset the unit.  
Reconnect the adaptor and try again.  
R The handset has not been registered to the base unit.  
Register the handset (page 42).  
The handset display is blank or R The handset is in screen saver mode (page 16). Activate  
dark. the handset display again by:  
– pressing M  
N when on a call.  
– pressing MOFFN at all other times.  
R LCD backlightis set to Offwhile on charge.  
Change the setting (page 37).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
61  
   
Useful Information  
Problem  
Cause/solution  
I cannot pair a cellular phone to R Depending on the compatibility of the cellular phone, you  
the base unit.  
may not be able to pair it to the base unit. Confirm that  
your cellular phone supports the hands-free profile (HFP)  
specification.  
R Confirm that the Bluetooth feature of your cellular phone  
is turned on. You may need to turn this feature on  
depending on your cellular phone.  
R The Bluetooth technology on your cellular phone may not  
be functioning normally. Turn off and on your cellular  
phone.  
R If your cellular phone is already connected to another  
Bluetooth device, turn it off or disconnect it from your  
cellular phone.  
R Some cellular phones may require you to enter the  
Bluetooth PIN to pairing. Confirm that you entered the  
correct PIN.  
I cannot connect a cellular  
phone to the base unit.  
R Confirm that your cellular phone is turned on.  
R Confirm that your cellular phone is within base unit range  
(page 14).  
R Your cellular phone’s Bluetooth feature is turned off. Turn  
it on.  
R Depending on the state of the wireless environment, such  
as the presence of any electrical interference, there may  
be a delay even if the auto connection feature is turned  
on. You can connect to the base unit manually (page 19).  
R The cellular phone has not been paired to the base unit.  
Pair the cellular phone (page 17).  
I cannot hear a dial tone.  
R The base unit’s AC adaptor or telephone line cord is not  
connected. Check the connections.  
R Disconnect the base unit from the telephone line and  
connect the line to a known working telephone. If the  
working telephone operates properly, contact our service  
personnel to have the unit repaired. If the working  
telephone does not operate properly, contact your service  
provider/telephone company.  
I cannot use the Smart function R Another unit is in use. Wait and try again later.  
key even if the  
flashing slowly.  
indicator is  
The base unit beeps.  
R New messages have been recorded. Listen to the new  
messages (page 52).  
Menu list  
Problem  
Cause/solution  
The display is in a language I  
cannot read.  
R Change the display language (page 15).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
Useful Information  
Problem  
Cause/solution  
I cannot register a handset to a R The maximum number of handsets (6) is already  
base unit.  
registered to the base unit. Cancel unused handset  
registrations from the base unit (page 42).  
Battery recharge  
Problem  
Cause/solution  
R Battery charge is low. Fully charge the batteries (page 10).  
The handset beeps and/or  
flashes.  
I fully charged the batteries, but  
R Clean the battery ends (  
with a dry cloth and charge again.  
R It is time to replace the batteries (page 10).  
,
) and the charge contacts  
still flashes,  
is displayed, or  
– the operating time seems to  
be shorter.  
Making/answering calls, intercom  
Problem  
is displayed.  
Cause/solution  
R The handset is too far from the base unit. Move closer.  
R The base unit’s AC adaptor is not properly connected.  
Reconnect AC adaptor to the base unit.  
R The handset is not registered to the base unit. Register it  
(page 42).  
Noise is heard while talking,  
sound cuts in and out.  
R You are using the handset or base unit in an area with  
high electrical interference. Re-position the base unit and  
use the handset away from sources of interference.  
R Move closer to the base unit.  
R If you use a DSL/ADSL service, we recommend  
connecting a DSL/ADSL filter between the base unit and  
the telephone line jack. Contact your DSL/ADSL provider  
for details.  
R While you are talking on a cellular call using the link to cell  
feature, you may hear noise during a cellular call if your  
smartphone is too close to the base unit. For best  
performance, we recommend placing your smartphone  
between 0.6 m to 3 m (2 feet to 10 feet) away from the  
base unit.  
Unexpected sounds from your  
cellular phone are heard  
through the unit’s speaker.  
R Apps installed on your smartphone may treat in-app  
sound effects or others sounds as music. In this case,  
these sounds may be heard through the unit’s speaker.  
Use your smartphone to quit the corresponding app.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
Useful Information  
Problem  
Cause/solution  
The handset or base unit does R The ringer volume for landline is turned off. Adjust the  
not ring.  
ringer volume (page 35).  
R The ringer volume for cellular line is turned off. Adjust the  
ringer volume (page 34).  
R When one handset is selected to ring for cellular calls,  
other units do not ring. To change the selection, see  
page 18.  
R Silent mode is turned on. Turn it off (page 40).  
I cannot make local calls with  
the handset using a cellular line.  
R You need to add your area code when making cellular  
calls. Store your area code in order to automatically add it  
to the beginning of the 7-digit phone number when  
making cellular calls (page 20).  
I cannot make or answer  
cellular calls with the handset.  
or  
I cannot answer cellular calls  
with the base unit.  
R Depending on the cellular phone’s compatibility (page 4),  
you may not be able to make or answer cellular calls even  
if the cellular phone is connected to the base unit.  
R Make sure that the CELL indicator lights up and the  
cellular phone is connected to the base unit (page 19).  
R If someone is talking on a cellular call, you cannot use the  
cellular feature. There can be only one active Bluetooth  
connection at a time.  
R The cellular phone is being used separately from your  
system.  
I can make and answer cellular R The Bluetooth technology on your cellular phone may not  
calls but cannot hear a sound.  
be functioning normally. Turn off and on your cellular  
phone.  
R Disconnect and reconnect the base unit AC adaptor and  
try again.  
I cannot switch cellular calls  
from the unit to the cellular  
phone.  
R Your cellular phone may not support this feature. Refer to  
the operating instructions of your cellular phone.  
I cannot make a call using the  
landline.  
R The dialing mode may be set incorrectly. Change the  
setting (page 16).  
I cannot make long distance  
calls.  
R Make sure that you have long distance service.  
I pressed MZN on the base unit R If the landline is in use when MZN is pressed on the base  
but the desired cellular call was unit, the base unit picks up the landline.  
not transferred to the base unit. R If 2 cellular phones are in use when MZN is pressed on the  
base unit, the base unit picks up the CELL 1 line.  
The cellular line is not  
R This may occur depending on the phone app. Use the  
disconnected even though I  
ended the call on the handset  
(or the base unit).  
cellular phone to disconnect the call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64  
Useful Information  
Caller ID/Talking Caller ID  
Problem  
Cause/solution  
Caller information is not  
displayed.  
R You must subscribe to Caller ID service. Contact your  
service provider/telephone company for details.  
R If your unit is connected to any additional telephone  
equipment such as a Caller ID box or cordless telephone  
line jack, plug the unit directly into the wall jack.  
R If you use a DSL/ADSL service, we recommend  
connecting a DSL/ADSL filter between the base unit and  
the telephone line jack. Contact your DSL/ADSL provider  
for details.  
R The name display service for landline calls may not be  
available in some areas. Contact your service provider/  
telephone company for details.  
R Other telephone equipment may be interfering with this  
unit. Disconnect the other equipment and try again.  
Caller information is displayed  
or announced late.  
R Depending on your service provider/telephone company,  
the unit may display or announce the caller’s information  
at the 2nd ring or later.  
R Move closer to the base unit.  
Caller information is not  
announced.  
R The ringer volume for landline is turned off. Adjust the  
ringer volume (page 35).  
R The ringer volume for cellular line is turned off. Adjust the  
ringer volume (page 34).  
R When one handset is selected to ring for cellular calls,  
other units do not announce caller information. To change  
the selection, see page 18.  
R The Talking Caller ID feature is turned off. Turn it on  
(page 36).  
R The ring as cell mode is set to On (without Talking  
CID). To change the mode, see page 18.  
R The number of rings for the answering system is set to 2  
ringsor Toll saver. Select a different setting  
(page 56).  
R Your unit does not announce caller information while the  
other devices such as handsets are engaged in a call.  
The caller list/incoming phone  
numbers are not edited  
automatically.  
R The Caller ID number auto edit feature is turned off. Turn  
it on and try again (page 37).  
R You need to call back the edited number to activate Caller  
ID number auto edit.  
I cannot dial the phone number R The phone number you dialed might have been edited  
edited in the caller list.  
incorrectly (for example, the long distance “1” or the area  
code is missing). Edit the phone number with another  
pattern (page 45).  
Time on the unit has shifted.  
R Incorrect time information from incoming Caller ID  
changes the time. Set the time adjustment to Manual”  
(off) (page 36).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
Useful Information  
Problem  
Cause/solution  
The 2nd caller’s information is  
not displayed during an outside  
call.  
R In order to use Caller ID, call waiting, or Call Waiting  
Caller ID (CWID), you must first contact your service  
provider/telephone company and subscribe to the desired  
service.  
After subscribing, you may need to contact your service  
provider/telephone company again to activate this specific  
service, even if you already subscribed to both Caller ID  
and Call Waiting with Caller ID services (CWID).  
Using Bluetooth devices  
Problem  
Cause/solution  
I cannot copy phonebook  
entries from a cellular phone.  
R Confirm that the cellular phone supports Bluetooth  
wireless technology.  
R Confirm that the cellular phone supports the Phone Book  
Access Profile (PBAP) or Object Push Profile (OPP)  
specification.  
R If the cellular phone is already connected to another  
Bluetooth device, turn it off or disconnect it from the  
cellular phone.  
R Someone is using a cellular line. Try again later.  
R Turn the cellular phone off, then turn it on and try again.  
R If an entry is already stored in the unit’s phonebook, the  
entry cannot be copied even by selecting another group.  
An error tone is heard when I  
try to program the Bluetooth  
feature.  
R The Bluetooth feature cannot be accessed immediately  
after connecting the AC adaptor to the base unit. Wait a  
few seconds and try again.  
Text message alerts are not  
displayed or announced.  
R Confirm that the cellular phone supports the Message  
Access Profile (MAP) specification.  
R If your smartphone does not support Message Access  
Profile (MAP), download the "Text Message Alert" app  
(page 49).  
R Text message (SMS) alert is set to On(no announce)”  
or Off. Set it to On(with name).  
R The Bluetooth device’s Bluetooth notifications setting is  
turned off.  
R The handset selected to display and/or announce alerts is  
in use.  
R The Bluetooth device or its corresponding cellular line is  
in use.  
I cannot play music from my  
Bluetooth device through the  
base unit’s speaker.  
R Confirm that your Bluetooth device supports the  
Advanced Audio Distribution Profile (A2DP) specification.  
R The desired Bluetooth device is not selected. Change the  
Music device” setting (page 34).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
Useful Information  
Problem  
Cause/solution  
I cannot use the handset as a  
remote control when playing  
music from your Bluetooth  
device through the base unit’s  
speaker.  
R Confirm that the Bluetooth device supports the Audio  
Video Remote Control Profile (AVRCP) specification.  
The handset does not show  
music information on the  
display.  
R Confirm that the Bluetooth device supports the Audio  
Video Remote Control Profile (AVRCP ver 1.3 or later)  
specification.  
I am not talking on a cellular  
call, but the CELL indicator on  
the base unit may flash.  
R Confirm that some kind of media player app is not  
activated on your smartphone.  
Answering system  
Problem  
Cause/solution  
The unit does not record new  
messages.  
R The answering system is turned off. Turn it on (page 51).  
R The answering system does not answer or record calls  
from cellular lines.  
R The message memory is full. Erase unnecessary  
messages (page 52).  
R The recording time is set to Greeting only. Change  
the setting (page 56).  
R Your service provider/telephone company’s voice mail  
service may be answering your calls before the unit’s  
answering system can answer your calls. Change the  
unit’s number of rings setting (page 56) to a lower value,  
or contact your service provider/telephone company.  
R The answering system will not answer incoming calls  
while the other devices such as handsets are engaged in  
a call.  
I cannot operate the answering R The remote access code is not set. Set the remote  
system remotely.  
access code (page 54).  
R You are entering the wrong remote access code. If you  
have forgotten your remote access code, enter the  
remote access code setting to check your current code  
(page 54).  
R The answering system is turned off. Turn it on (page 55).  
R You cannot operate the answering system when calling a  
cellular phone paired to the base unit.  
The unit does not emit the  
specified number of rings.  
R If the first ring is turned off, the number of rings decreases  
by 1 from the specified number of rings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Useful Information  
Bluetooth PIN  
Problem  
Cause/solution  
I cannot remember the PIN.  
R Change the PIN using the following method.  
1
2
3
4
MMENUN (right soft key) #619  
*7000  
Enter the new 4-digit PIN. a MOKN  
Enter the new 4-digit PIN again. a MSAVEN a MOFFN  
Voice mail  
Problem  
Cause/solution  
Voice mail msg. via  
phone co.is shown on the  
handset display. How do I  
remove this message from the  
display?  
R This notification is displayed when your service provider/  
telephone company’s voice mail service (not the unit’s  
answering system) has recorded a message for you.  
Typically you can remove this notification from the display  
by listening to the message. To listen to the message, dial  
the voice mail number provided by your service provider/  
telephone company (for most cases, this will be your own  
phone number), and follow the voice instructions.  
Depending on your service provider/telephone company,  
you may need to remove all messages from your voice  
mailbox to remove the notification. You can also remove  
this notification by pressing and holding # until the unit  
beeps.  
Liquid damage  
Problem  
Cause/solution  
Liquid or other form of moisture R Disconnect the AC adaptor and telephone line cord from  
has entered the handset/base  
unit.  
the base unit. Remove the batteries from the handset and  
leave to dry for at least 3 days. After the handset/base  
unit are completely dry, reconnect the AC adaptor and  
telephone line cord. Insert the batteries and charge fully  
before use. If the unit does not work properly, contact an  
authorized service center.  
Caution:  
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
68  
 
Useful Information  
FCC and other information  
This equipment complies with Part 68 of the  
FCC rules and the requirements adopted by  
the ACTA. On the bottom of this equipment  
is a label that contains, among other  
information, a product identifier in the  
format US:ACJ----------.  
advised of your right to file a complaint with  
the FCC if you believe it is necessary.  
The telephone company may make changes  
in its facilities, equipment, operations or  
procedures that could affect the operation of  
the equipment. If this happens the  
telephone company will provide advance  
notice in order for you to make necessary  
modifications to maintain uninterrupted  
service.  
If requested, this number must be provided  
to the telephone company.  
L Registration No.............(found on the  
bottom of the unit)  
L Ringer Equivalence No. (REN).......0.1B  
If trouble is experienced with this  
equipment, for repair or warranty  
A plug and jack used to connect this  
equipment to the premises wiring and  
telephone network must comply with the  
applicable FCC Part 68 rules and  
information, please contact a Factory  
Service Center or other Authorized Servicer.  
If the equipment is causing harm to the  
telephone network, the telephone company  
may request that you disconnect the  
equipment until the problem is resolved.  
requirements adopted by the ACTA. A  
compliant telephone cord and modular plug  
is provided with the product. It is designed  
to be connected to a compatible modular  
jack that is also compliant.  
Connection to party line service is subject to  
state tariffs. Contact the state public utility  
commission, public service commission or  
corporation commission for information.  
The REN is used to determine the number  
of devices that may be connected to a  
telephone line. Excessive RENs on a  
telephone line may result in the devices not  
ringing in response to an incoming call. In  
most but not all areas, the sum of RENs  
should not exceed five (5.0). To be certain  
of the number of devices that may be  
connected to a line, as determined by the  
total RENs, contact the local telephone  
company. For products approved after July  
23, 2001, the REN for the product is part of  
the product identifier that has the format  
US:AAAEQ##TXXXX. The digits  
If your home has specially wired alarm  
equipment connected to the telephone line,  
ensure the installation of this equipment  
does not disable your alarm equipment. If  
you have questions about what will disable  
alarm equipment, consult your telephone  
company or a qualified installer.  
This equipment is hearing aid compatible as  
defined by the FCC in 47 CFR Section  
68.316.  
represented by ## are the REN without a  
decimal point (e.g., 03 is a REN of 0.3).  
When you hold the phone to your ear, noise  
might be heard in your Hearing Aid. Some  
Hearing Aids are not adequately shielded  
from external RF (radio frequency) energy. If  
noise occurs, use an optional headset  
accessory or the speakerphone option (if  
applicable) when using this phone. Consult  
with your audiologist or Hearing Aid  
If this equipment causes harm to the  
telephone network, the telephone company  
will notify you in advance that temporary  
discontinuance of service may be required.  
But if advance notice isn't practical, the  
telephone company will notify the customer  
as soon as possible. Also, you will be  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69  
 
Useful Information  
manufacturer about the availability of  
Hearing Aids which provide adequate  
shielding to RF energy commonly emitted  
by digital devices.  
encouraged to try to correct the interference  
by one or more of the following measures:  
– Reorient or relocate the receiving  
antenna.  
– Increase the separation between the  
equipment and receiver.  
WHEN PROGRAMMING EMERGENCY  
NUMBERS AND(OR) MAKING TEST  
CALLS TO EMERGENCY NUMBERS:  
1) Remain on the line and briefly explain to  
the dispatcher the reason for the call.  
2) Perform such activities in the off-peak  
hours, such as early morning or late  
evenings.  
– Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
– Consult the dealer or an experienced  
radio/TV technician for help.  
Some cordless telephones operate at  
frequencies that may cause interference to  
nearby TVs and VCRs. To minimize or  
prevent such interference, the base of the  
cordless telephone should not be placed  
near or on top of a TV or VCR. If  
This device complies with Part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful  
interference, and (2) this device must  
accept any interference received, including  
interference that may cause undesired  
operation.  
interference is experienced, move the  
cordless telephone further away from the TV  
or VCR. This will often reduce or eliminate  
interference.  
Privacy of communications may not be  
ensured when using this phone.  
FCC RF Exposure Warning:  
L This product complies with FCC radiation  
exposure limits set forth for an  
uncontrolled environment.  
CAUTION:  
Any changes or modifications not expressly  
approved by the party responsible for  
compliance could void the user’s authority  
to operate this device.  
L To comply with FCC RF exposure  
requirements, the base unit must be  
installed and operated 20 cm (8 inches)  
or more between the product and all  
person’s body.  
NOTE:  
This equipment has been tested and found  
to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate  
radio frequency energy and, if not installed  
and used in accordance with the  
L This product may not be collocated or  
operated in conjunction with any other  
antenna or transmitter.  
L For body-worn operation, the handset  
must be used only with a non-metallic  
accessory. Use of other accessories may  
not ensure compliance with FCC RF  
exposure requirements.  
Notice:  
instructions, may cause harmful  
L FCC ID can be found inside the battery  
compartment or on the bottom of the  
units.  
interference to radio communications.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the user is  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
Useful Information  
Compliance with TIA-1083 standard:  
Telephone handsets identified with this logo  
have reduced noise and interference when  
used with T-Coil equipped hearing aids and  
cochlear implants.  
Compatible with  
Hearing Aid T-Coil  
T
TIA-1083  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
Guía Rápida Española  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72  
 
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
73  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80  
Guía Rápida Española  
Download from Www.Somanuals.com. All Manuals Search And Download.  
81  
Appendix  
Customer services  
Customer Services Directory (United States and Puerto Rico)  
Obtain Product Information and Operating Assistance; locate your nearest  
Dealer or Service Center; purchase Parts and Accessories; or make Customer  
Service and Literature requests by visiting our Web Site at:  
or, contact us via the web at:  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
Accessory Purchases (United States and Puerto Rico)  
Purchase Parts, Accessories and Owner’s Manual online for all  
Panasonic Products by visiting our Web Site at:  
or, send your request by E-mail to:  
You may also contact us directly at:  
1-800-237-9080 (Fax Only)  
(Monday - Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Avenue S., Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American Express.)  
For hearing or speech impaired TTY users, TTY: 1-866-605-1277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82  
   
Appendix  
Warranty (For United States and Puerto Rico)  
Panasonic Telephone Products  
Limited Warranty  
Limited Warranty Coverage  
If your product does not work properly because of a defect in materials or workmanship,  
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length  
of the period indicated on the chart below, which starts with the date of original purchase  
(“Limited Warranty period”), at its option either (a) repair your product with new or  
refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or  
(c) refund your purchase price. The decision to repair, replace or refund will be made by  
the warrantor.  
Parts  
Labor  
One (1) Year  
One (1) Year  
During the “Labor” Limited Warranty period there will be no charge for labor. During the  
“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your  
product prepaid during the Limited Warranty period. This Limited Warranty excludes both  
parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited  
Warranty only applies to products purchased and serviced in the United States or Puerto  
Rico. This Limited Warranty is extended only to the original purchaser and only covers  
products purchased as new.  
Mail-In Service--Online  
Online Repair Request  
To submit a new repair request and for quick repair status visit our Web Site at  
When shipping the unit carefully pack in a padded shipping carton, include all  
accessories, and send it prepaid. Include a letter detailing the complaint, a return  
address and provide a day time phone number where you can be reached. P.O. Boxes  
are not acceptable. Keep the tracking number for your records. A copy of valid  
registered receipt is required under the 1 year parts and labor Limited Warranty.  
For Limited Warranty service for headsets if a headset is included with this  
product please follow instructions above.  
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE  
PURCHASER WILL BE REQUIRED TO FURNISH A SALES  
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,  
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE  
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH  
PROOF OF PURCHASE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
83  
 
Appendix  
Limited Warranty Limits And Exclusions  
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,  
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty  
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are  
caused by products not supplied by the warrantor, or failures which result from accidents,  
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty  
installation, set-up adjustments, misadjustment of consumer controls, improper  
maintenance, power line surge, lightning damage, modification, introduction of sand,  
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or  
rental use of the product, or service by anyone other than a Factory Service Center or  
other Authorized Servicer, or damage that is attributable to acts of God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED  
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR  
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this  
excludes damages for lost time, lost calls or messages, cost of having someone remove or  
re-install an installed unit if applicable, travel to and from the servicer. The items listed are  
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,  
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE  
PERIOD OF THE LIMITED WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, or limitations on how long an implied warranty lasts, so the exclusions may not  
apply to you.  
This Limited Warranty gives you specific legal rights and you may also have other rights  
which vary from state to state. If a problem with this product develops during or after the  
Limited Warranty period, you may contact your dealer or Service Center. If the problem is  
not handled to your satisfaction, then write to the warrantor’s Consumer Affairs  
Department at the addresses listed for the warrantor.  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,  
ARE YOUR RESPONSIBILITY.  
When you ship the product  
L Carefully pack your unit, preferably in the original carton.  
L Attach a letter, detailing the symptom.  
L Send the unit to Panasonic Exchange Center, prepaid and adequately insured.  
L Do not send your unit to Panasonic Corporation of North America listed on the back  
cover or to executive or regional sales offices. These locations do not repair consumer  
products.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84  
Index  
Display mode: 37  
Language: 15  
LCD backlight: 37  
Wallpaper: 37  
Eco mode: 11  
Equalizer: 24  
Index  
#
3-way conference: 24  
E
A
Additional handset: 42  
Alarm: 39  
Error messages: 60  
Flash: 23, 37  
Answering calls: 22  
Answering system  
F
G
H
Groups: 28  
Handset  
Deregistration: 42  
Locator: 12, 13  
Name: 42  
Registration: 42  
Hold: 22  
Intercom: 26  
Key detector: 33, 36  
Key tone: 37  
Landline calls: 21  
Line mode: 37  
Call screening: 56  
Erasing messages: 52, 53, 55  
Greeting message: 51  
Greeting only: 56  
Listening to messages: 52, 55  
Message list: 52  
New message alerting: 53  
Number of rings: 56  
Recording time: 56  
Remote access code: 54  
Remote operation: 54  
Ring count: 56  
Toll saver: 56  
Turning on/off: 51  
Auto talk: 37  
Battery: 10, 11  
Bluetooth wireless technology  
Cellular phone (Link to cell): 17  
Phonebook transfer: 47  
Booster (Clarity booster): 23  
Call block: 40  
First ring: 41  
Call share: 24, 37  
Call waiting: 23  
Call Waiting Caller ID: 23  
Caller ID number auto edit: 37, 45  
Caller ID service: 44  
Caller list: 44  
Caller list edit: 45  
Cellular calls: 21  
Cellular phone  
I
K
L
Link to cell  
Area code: 20  
Auto connection: 18  
Cellular line only mode: 19  
Cellular line selection: 20  
Connection: 19  
Ring as cell mode: 18  
Select unit to ring: 18  
Text message (SMS: Short Message  
Service) alert: 49  
Making calls: 21  
Missed calls: 44  
Mute: 23  
Noise reduction: 23  
Pause: 22  
Phonebook: 27  
PIN: 20  
Playing music: 48  
Power failure: 11  
B
C
M
N
P
Pairing: 17  
Unpairing: 17  
Chain dial: 30  
CID (Caller ID): 44, 45  
Conference calls: 24  
Control type: 12  
R
S
T
Redialing: 21  
Ringer ID: 28  
Ringer tone: 34, 35  
Rotary/pulse service: 23  
Silent mode: 40  
Smart function key (NR key): 16  
Speed dial: 30  
SP-PHONE (Speakerphone): 21  
Talking Caller ID: 44  
Temporary tone dialing: 23  
Time adjustment: 36  
Customer support: 37  
D
Date and time: 15  
Dialing mode: 16  
Direct command code: 32  
Display  
Color: 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
85  
 
Index  
Troubleshooting: 61  
TTY: 82  
V
VM (Voice mail): 58  
Voice guidance language: 15  
Voice mail: 56, 58  
Volume  
Receiver: 21  
Ringer (Base unit): 22, 34  
Ringer (Handset): 22, 34, 35  
Speaker: 21  
Speaker (Base unit): 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86  
Notes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
87  
IMPORTANT!  
If your product is not working properly. . .  
1 Reconnect AC adaptor to the base unit.  
2 Check if telephone line cord is connected.  
3 Use rechargeable Ni-MH batteries.  
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)  
4 Read troubleshooting page in the Operating Instructions.  
L
FAQ and troubleshooting hints are available.  
For your future reference  
We recommend keeping a record of the following information to assist with any repair under  
warranty.  
Serial No.  
Date of purchase  
(found on the bottom of the base unit)  
Name and address of dealer  
Attach your purchase receipt here.  
Two Riverfront Plaza, Newark, NJ 07102-5490  
© Panasonic System Networks Co., Ltd. 2013  
Printed in Malaysia  
*PNQX6433YA*  
*PNQX6433YA*  
PNQX6433YA CC1213WK1014  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTX Audio Speaker 525W User Manual
Multiquip Portable Generator GA 6RZ2 User Manual
NEC Personal Computer PD75P308 User Manual
Nortel Networks Network Router Instant Internet 400 Unit User Manual
Omega Home Security System PSW 31 User Manual
One for All Universal Remote OARC03G User Manual
Oregon Scientific Clock BAA339DPH User Manual
Panasonic All in One Printer DP 6530 User Manual
Panasonic Cell Phone EB GD96 User Manual
Panasonic Network Card AW PS300 User Manual