Panasonic Flat Panel Television 103PF12U User Manual

Operating Instructions

High Deﬁnition Plasma Display

Model No.

TH-103PF12U

The illustration shown is an image.

Before connecting, operating or adjusting this product, please read these instructions completely.

Please keep this manual for future reference.

English

TQBC2518

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11) Only use attachments / accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart / apparatus combination

to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment

from your new Plasma Display.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments,

and retain them for future reference.

Retain your purchase receipt as well, and record the model number and serial number of your set in the

space provided on the rear cover of these instructions.

Visit our Panasonic Web Site

http://panasonic.net

Table of Contents

Important Safety Instructions.................................. 3

FCC STATEMENT...................................................... 5

Safety Precautions................................................... 6

Maintenance.............................................................. 7

Accessories .............................................................. 8

Accessories Supplied.............................................. 8

Remote Control Batteries........................................ 8

Connections.............................................................. 9

AUDIO OUT Terminals connection.......................... 9

PC Input Terminals connection.............................. 10

SERIAL Terminals connection................................11

HDMI connection.................................................... 12

COMPONENT / RGB connection.......................... 12

Power ON / OFF ..................................................... 13

Selecting the input signal...................................... 15

Basic Controls ........................................................ 16

ASPECT Controls ................................................... 18

MULTI PIP................................................................ 19

Digital Zoom............................................................ 22

On-Screen Menu Displays..................................... 23

Adjusting POS. /SIZE ............................................. 25

PICTURE Adjustments........................................... 28

ADVANCED SETTINGS........................................ 29

Picture Proﬁles....................................................... 30

Saving proﬁles....................................................... 31

Loading proﬁles..................................................... 32

Editing proﬁles....................................................... 32

Locking proﬁles ..................................................... 33

SOUND Adjustment................................................ 35

SDI SOUND OUTPUT........................................... 35

PRESENT TIME SETUP / SET UP TIMER.............. 36

PRESENT TIME SETUP....................................... 36

SET UP TIMER ..................................................... 36

SCREENSAVER (For preventing image retention) .. 37

Setup of SCREENSAVER Time ............................ 38

Reduces screen image retention...............................39

EXTENDED LIFE SETTINGS ............................... 39

Reduces power consumption ............................... 42

Customizing the Input labels................................. 43

Selecting the On-Screen Menu Language............ 43

DISPLAY ORIENTATION......................................... 44

SET UP for MULTI DISPLAY................................... 45

How to setup MULTI DISPLAY.............................. 45

ID Remote Control Function.................................. 46

MULTI PIP SETUP................................................... 47

SET UP for PORTRAIT ........................................... 48

How to setup PORTRAIT ...................................... 48

SET UP for Input Signals ....................................... 50

COMPONENT / RGB IN SELECT......................... 50

YUV / RGB IN SELECT......................................... 50

SIGNAL menu ....................................................... 51

3D Y/C FILTER...................................................... 51

COLOR SYSTEM / Panasonic AUTO ................... 52

3:2 PULLDOWN.................................................... 52

XGA MODE ........................................................... 52

REFRESH RATE................................................... 53

NOISE REDUCTION............................................. 53

SYNC .................................................................... 54

SDI THROUGH ..................................................... 54

Input signal display................................................ 54

Options Adjustments ............................................. 55

Weekly Command Timer ....................................... 58

Shipping condition................................................. 59

Troubleshooting ..................................................... 60

List of Aspect Modes ............................................. 61

Applicable input signals ........................................ 62

Command list of Weekly Command Timer........... 64

Speciﬁcations......................................................... 65

Panasonic Professional Flat Panel Display

Limited Warranty .................................................... 66

LIMITED WARRANTY STATEMENT....................... 67

Customer Service................................................... 68

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only shielded interface

cables when connecting to computer or peripheral devices. Any changes or modiﬁcations not expressly

approved by Panasonic Corp. of North America could void the user's authority to operate this device.

FCC Declaration of Conformity

Model No. TH-103PF12U

Responsible Party:

Contact Source:

Panasonic Corporation of North America

One Panasonic Way 1F-10, Secaucus, NJ 07094

Panasonic Professional Display Company

Panasonic Plasma Concierge 1-800-973-4390

CANADIAN NOTICE:

This Class B digital apparatus complies with Canadian ICES-003.

Note:

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention to

remain on the Plasma Display.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Inc. USA.

• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully

respected.

• HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

CAUTION

This Plasma Display is for use only with the following optional accessories. Use with any other type of optional

accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

•Pedestal.................................................................. TY-ST103PF9

•Wall-hanging bracket (vertical)................................ TY-WK103PV9

•Ceiling-haging bracket ............................................ TY-CE103PS10

•BNC Component Video Terminal Board.................. TY-42TM6A

•BNC Composite Video Terminal Board................... TY-42TM6B

•BNC Dual Video Terminal Board............................. TY-FB9BD

•RCA Component Video Terminal Board.................. TY-42TM6Z

•RCA Composite Video Terminal Board ................... TY-42TM6V

•RGB Active Through Terminal Board ...................... TY-42TM6G

•PC Input Terminal Board......................................... TY-42TM6P

•

Composite / Component Video Terminal Board................ TY-42TM6Y

•BNC SDI Terminal Board ........................................ TY-FB7SD

•HD-SDI Terminal Board .......................................... TY-FB9HD

•HD-SDI Terminal Board with audio ......................... TY-FB10HD

•Dual Link HD-SDI Terminal Board........................... TY-FB11DHD

•HDMI Terminal Board.............................................. TY-FB8HM

•Dual HDMI Terminal Board ..................................... TY-FB10HMD

•DVI-D Terminal Board ............................................. TY-FB11DD

•Ir Through Terminal Board ...................................... TY-FB9RT

•Wireless Presentation Board .................................. TY-FB10WPU

•AV Terminal Box...................................................... TY-TB10AV

•LAN Control Board.................................................. TY-FB12LC

Always be sure to ask a qualiﬁed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard

unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being

played with by young children, creating the potential risk of suffocation.

Clean the power cable regularly to prevent it from

becoming dusty.

• Built-up dust on the power cord plug can increase humidity

which might damage the insulation and cause ﬁre. Unplug

When using the Plasma Display

Do not bring your hands, face or objects close to the

ventilation holes of the Plasma Display.

Top of the Plasma Display is usually very hot due to the

high temperature of exhaust air being released through the

ventilation holes. Burns or personal injuries can happen if any

body parts are brought too close. Placing any object near the

top of the display could also result in heat damages to the object

as well as to the Display if its ventilation holes are blocked.

•

the cord from the wall outlet and clean it with a dry cloth.

This Plasma Display radiates infrared rays, therefore it

may affect other infrared communication equipment.

Install your infrared sensor in a place away from direct

or reﬂected light from your Plasma Display.

Be sure to disconnect all cables before moving the Plasma Display.

Note:

•

Moving the Display with its cables attached might damage

Do not allow a still picture to be displayed for an extended

period, as this can cause a permanent image retention to

remain on the Plasma Display.

Examples of still pictures include logos, video games, computer

images, teletext and images displayed in 4:3 mode.

the cables which, in turn, can cause ﬁre or electric shock.

Disconnect the power plug from the wall outlet as a

safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

WARNING

Securely insert the power cord plug as far as it will go.

• If the plug is not fully inserted, heat may be generated

which could cause ﬁre. If the plug is damaged or the

wall socket plate is loose, they should not be used.

Setup

Do not place the Plasma Display on sloped or unstable

surfaces.

• The Plasma Display may fall off or tip over.

Do not place any objects on top of the Plasma Display.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

•

If water spills onto the Plasma Display or foreign objects get

inside it, a short-circuit may occur which could result in ﬁre or

electric shock. If any foreign objects get inside the Plasma

Display, please consult an Authorized Service Center.

Do not do anything that might damage the power cable.

When disconnecting the power cable, hold the plug,

not the cable.

• Do not make any modiﬁcations, place heavy objects on,

place near hot objects, heat, bend, twist or forcefully

pull the power cable. Doing so may cause damage to

the power cable which can cause ﬁre or electric shock.

If damage to the cable is suspected, have it repaired at

an Authorized Service Center.

Do not cover the ventilation holes.

• Doing so may cause the Plasma Display to overheat,

which can cause ﬁre or damage to the Plasma Display.

Transport only in upright position!

• Transporting the unit with its display panel facing upright or

downward may cause damage to the internal circuitry.

If using the pedestal (optional accessory), leave a space

of 12.0” (30 cm) or more at the top, left and right, and

8.0” (20 cm) or more at the rear, and also keep the space

between the bottom of the display and the ﬂoor surface.

If using some other setting-up method, follow the manual

of it. (If there is no speciﬁc indication of installation

dimension in the installation manual, leave a space of

12.0” (30 cm) or more at the top, bottom, left and right,

and 8.0” (20 cm) or more at the rear.)

If the Plasma Display will not be used for a long period

of time, unplug the power cord from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the

Plasma Display, unplug the power cord immediately.

• Continuous use of the Display under these conditions

might cause ﬁre or permanent damage to the unit.

Have the Display evaluated at an Authorized Service

Center. Services to the Display by any unauthorized

personnel are strongly discouraged due to its high

voltage dangerous nature.

An apparatus with CLASS I construction shall be

connected to a mains socket outlet with a protective

earthing connection.

AC Power Supply Cord

If water or foreign objects get inside the Plasma Display,

if the Plasma Display is dropped, or if the cabinet

becomes damaged, disconnect the power cord plug

immediately.

The Plasma Display is designed to operate on 200-

240 V AC, 50/60 Hz.

• Contact an electrician for the 200 V power supply

engineering.

• A short may occur, which could cause ﬁre. Contact an

Authorized Service Center for any repairs that need to

be made.

Ensure that the mains plug is easily accessible.

Do not use any power supply cord other than that

provided with this unit.

• Doing so may cause ﬁre or electric shocks.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning

cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which

neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface

is dry.

• Do not scratch or hit the surface of the panel with ﬁngernails or other hard objects, otherwise the surface may become

damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise

the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added

and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get

inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet

surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact

with articles made from rubber or PVC.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessories

Accessories Supplied

Check that you have the Accessories and items shown

Operating

Instruction book

Remote Control Transmitter

EUR7636070R

Batteries for the

Remote Control

Transmitter

Fixing bands × 2

(AA Size × 2)

AC cord

Allen wrench

Eyebolt cap × 3

Blind sheet × 1

Remote Control Batteries

Requires two AA batteries.

1. Pull and hold the hook, then

open the battery cover.

2. Insert batteries - note correct

polarity ( + and -).

3. Replace the cover.

“AA” size

Helpful Hint:

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.

Disposal of batteries should be in an environment-friendly manner.

Observe the following precautions:

1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.

6. Do not burn or breakup batteries.

Batteries must not be exposed to excessive heat such as sunshine, ﬁre or the like.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

ꢀ

AUDIO OUT Terminals connection

AUDIO OUT

Stereophonic sound code

audio equipment

AC cord connection (see page 13)

line-in

– AC cord ﬁxing

Unplug the AC cord

Push until

the hook clicks.

Unplug the

1 Plug theAC cord into

the display unit.

Plug the AC cord until

it clicks.

AC cord

Open

pressing the

two knobs.

Note:

When disconnecting theAC

cord, be absolutely sure to

disconnect theAC cord plug

at the socket outlet ﬁrst.

2. Pull off.

Note:

Make sure that the

AC cord is locked on both

the left and right sides.

1. Keep the

Fix the AC cord with

the clamper.

knob pressed.

– Cable ﬁxing bands

Secure any excess cables with bands as required.

Note:

Two ﬁxing bands are supplied with this unit. In case of securing cables at four positions, please purchase it separately.

Pass the attached cable

ﬁxing band through the

clip as shown in the

ﬁgure.

To secure cables connected to Terminals, wrap the cable ﬁxing band around them then

pass the pointed end through the locking block, as shown in the ﬁgure.

While ensuring there is sufﬁcient slack in cables to minimize stress (especially

in the power cord), ﬁrmly bind all cables with the supplied ﬁxing band.

To loosen:

Push the catch

To tighten:

Pull

AUDIO

R/CR/R

B/CB/B

Y/G

AUDIO

COMPONENT/RGB IN

SLOT1

SLOT3

AUDIO OUT

SLOT2

PC IN

SERIAL

Optional Terminal DualHDMITerminals COMPONENT/RGB IN and From EXTERNAL From SERIAL From input

(equivalent of Dual AudioINTerminals(equivalent monitor terminal

HDMITerminalBoard of BNC Component Video on Computer

Terminal on

Computer

on audio

Board Insert Slot

(covered)

ampliﬁer

(TY-FB10HMD))

(see page 12)

Terminal Board (TY-42TM6A)) (see page 10)

(see page 12)

(see page 11) (see page 9)

Note: At factory shipment, Terminal boards are installed in SLOT 2 and SLOT 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

PC Input Terminals connection

(Female)

COMPUTER

AUDIO

PC IN

Conversion adapter

(if necessary)

Mini D-sub 15p

(Male)

RGB

PC cable

Audio

Stereo plug

Connect a cable which matches

the audio output terminal on the computer.

Notes:

• With regard to the typical PC input signals that are described in the applicable input signals list (see page 62), adjustment

values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight

PC input signal types that are not included in the list.

• Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning

frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080

dots when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible

to show ﬁne detail with sufﬁcient clarity.

• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need

to make setting changes to the computer at the time of connection.

• Some PC models cannot be connected to the set.

• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

• The computer shown in the illustration is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speciﬁed

frequency range.

• Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

• Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT”

(when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 50)

Signal Names for Mini D-sub 15P Connector

Pin No.

Signal Name

R (P_R/C_R)

Pin No.

Signal Name

GND (Ground)

Pin No.

Signal Name

NC (not connected)

G (Y)

GND (Ground)

+5 V DC

SDA

HD/SYNC

15 14 13 12 11

B (P_B/C_B)

NC (not connected)

GND (Ground)

Pin Layout for PC Input

Terminal

GND (Ground)

SCL

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

SERIAL Terminals connection

The SERIAL terminal is used when the Plasma Display is controlled by a computer.

(Male)

COMPUTER

SERIAL

RS-232C Straight cable

Pin layout for SERIAL Terminal

(Female)

D-sub 9p

Notes:

• Use the RS-232C straight cable to connect the computer

to the Plasma Display.

• The computer shown is for example purposes only.

• Additional equipment and cables shown are not supplied

with this set.

Signal names for D-sub 9P connector

Details

R X D

T X D

Pin No.

The SERIAL terminal conforms to the RS-232C interface

speciﬁcation, so that the Plasma Display can be controlled

by a computer which is connected to this terminal.

The computer will require software which allows the

sending and receiving of control data which satisﬁes the

conditions given below. Use a computer application such as

programming language software. Refer to the documentation

for the computer application for details.

GND

Non use

•

(Shorted in this set)

•

These signal names are those of computer speciﬁcations.

Communication parameters

Signal level

Synchronization method

Baud rate

RS-232C compliant

Command

Command Parameter

PON

POF

AVL

Asynchronous

9600 bps

None

Control details

Power ON

Power OFF

Volume 00 - 63

Audio MUTE OFF

Audio MUTE ON

None

Parity

Character length

Stop bit

8 bits

1 bit

AMT

Flow control

IMS

None

SL1

Input select (toggle)

Slot1 input

Basic format for control data

The transmission of control data from the computer starts with

a STX signal, followed by the command, the parameters, and

lastly an ETX signal in that order. If there are no parameters,

then the parameter signal does not need to be sent.

SL2

Slot2 input

SL3

PC1

SL1A

SL1B

SL2A

SL2B

Slot3 input

PC input

Slot1 input (INPUT1A)

Slot1 input (INPUT1B)

Slot2 input (INPUT2A)

Slot2 input (INPUT2B)

STX

C1 C2 C3

P1 P2 P3 P4 P5

ETX

Colon Parameter(s) End

(1 - 5 bytes) (03h)

DAM

None

Screen mode select (toggle)

ZOOM (For Video/SD/PC signal)

FULL

JUST (For Video/SD signal)

4:3 (For Video/SD/PC signal)

Panasonic Auto (For Video signal)

JUST (For HD signal)

4:3 (For HD signal)

Start

(02h)

3-character

command (3 bytes)

ZOOM

FULL

JUST

NORM

SELF

SJST

SNOM

SFUL

ZOM2

Notes:

• If multiple commands are transmitted, be sure to wait for

the response for the ﬁrst command to come from this unit

before sending the next command.

• If an incorrect command is sent by mistake, this unit will

send an “ER401” command back to the computer.

• SL1A, SL1B, SL2Aand SL2B of Command IMS are available

only when a dual input terminal board is attached.

H-FILL (For HD signal)

ZOOM (For HD signal)

With the power off, this display responds to PON command only.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

HDMI connection

This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and BNC Component Video Terminal

Board (TY-42TM6A) as standard equipment.

[Pin assignments and signal names]

Pin No.

Signal

Pin No.

Signal

T.M.D.S Clock

Shield

T.M.D.S Data2+

T.M.D.S Data2

Shield

T.M.D.S Data2-

T.M.D.S Data1+

T.M.D.S Data1

Shield

T.M.D.S Clock-

CEC

AUDIO

R/CR/R

PB/CB/B Y/G

COMPONENT/RGB IN

Reserved

(N.C. on device)

SLOT1

SLOT2

SLOT3

T.M.D.S Data1-

T.M.D.S Data0+

SCL

SDA

T.M.D.S Data0

Shield

T.M.D.S Data0-

T.M.D.S Clock+

DDC/CEC

Ground

+5V Power

HDMI cables

Hot Plug Detect

3 1

HDMI

AV OUT

Note:

DVD player

Additional equipment and HDMI cables shown

are not supplied with this set.

COMPONENT / RGB connection

COMPONENT VIDEO OUT

Example of input signal source

DVD

RCA-BNC

adapter

plug

Y, P^B, PR

OUT

Digital TV-SET-TOP-BOX

(DTV-STB)

AUDIO

OUT

AUDIO

R/CR/R

PB/CB/B Y/G

COMPONENT/RGB IN

SLOT3

Computer

RGB Camcorder

Notes:

• Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT”

(when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 50)

• Additional equipment, cables and adapter plugs shown are not supplied with this set.

• SYNC ON G signal is needed. (see page 54)

Download from Www.Somanuals.com. All Manuals Search And Download.

Power ON / OFF

Connecting the AC cord plug to the Plasma Display.

Fix the AC cord plug securely to the Plasma Display

with the clamper. (see page 9)

Connecting the plug to the Wall Outlet.

Note:

When disconnecting the AC cord, be absolutely sure to

disconnect the AC cord plug at the socket outlet ﬁrst.

Right side surface

Press the Power switch on the Plasma Display to turn the

set on: Power-On.

Main Power

On / Off Switch

Power Indicator: Green

Remote Control

Sensor

Power Indicator

Press the

button on the remote control to turn the Plasma Display off.

Power Indicator: Red (standby)

Press the

button on the remote control to turn the Plasma Display on.

Power Indicator: Green

Turn the power to the Plasma Display off by pressing the

when the Plasma Display is on or in standby mode.

switch on the unit,

Note:

During operation of the power management function, the power indicator turns

orange in the power off state.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power ON / OFF

When ﬁrst switching on the unit

Following screen will be displayed when the unit is turned on for the ﬁrst time.

Select the items with the remote control. Unit buttons are invalid.

OSD LANGUAGE

English (UK)

OSD LANGUAGE

Deutsch

Français

Select the language.

Set.

Italiano

Español

ENGLISH (US)

Русский

PRESENT TIME SETUP

SELECT

SET

Select “DAY” or “PRESENT TIME OF DAY”.

Setup “DAY” or “PRESENT TIME OF DAY”.

PRESENT TIME SETUP

PRESENT TIME OF DAY MON 99:99

SET

MON

99:99

DAY

PRESENT TIME OF DAY

Select “SET”.

Set.

PRESENT TIME SETUP

PRESENT TIME OF DAY MON 99:99

SET

TUE

DAY

10:00

PRESENT TIME OF DAY

DISPLAY ORIENTATION

For vertical installation, select “PORTRAIT”.

Set.

DISPLAY ORIENTATION

LANDSCAPE

PORTRAIT

Notes:

• Once the items are set, the screens won't be displayed when switching on the unit next time.

• After the setting, the items can be changed in the following menus.

OSD LANGUAGE (see page 43)

PRESENT TIME SETUP (see page 36)

DISPLAY ORIENTATION (see page 44)

From the second time on, the below screen is displayed for a while (setting condition is an example).

FULL

NANODRIFT

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the

equipment which has been connected to the Plasma Display.

Input signals will change as follows:

INPUT1

INPUT2A

INPUT2B

INPUT3

SLOT2 is for dual input so that you can select INPUT2A or

INPUT2B for INPUT2.

INPUT2A : HDMI signal terminal in SLOT2

INPUT2B : HDMI signal terminal in SLOT2

Press the INPUT “1”, “2”, “3” or “PC”

input mode selection button to select

the INPUT mode.

ENTER/

+ ^/

VOL

Press

to switch the input mode

INPUT

between INPUT2A and INPUT2B.

Notes:

• Selecting is also possible by pressing the INPUT button on the unit.

• Input terminal will not be selected if the terminal board is not installed into the SLOT.

• Select to match the signals from the source connected to the component/RGB input terminals.

(see page 50)

• In 2 screen display, the same input mode cannot be selected for the main picture and sub

picture.

• Image retention (image lag) may occur on the plasma display panel when a still picture is kept

on the panel for an extended period. The function that darkens the screen slightly is activated

to prevent image retention (see page 60), but this function is not the perfect solution to image

retention.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Controls

Main Unit

Right side

surface

Enter / Aspect button

(see page 18, 23)

Volume Adjustment

ENTER/

Volume Up “+” Down “–”

When the menu screen is displayed:

“+”:press to move the cursor up

“–”:press to move the cursor down

(see page 23)

VOL

INPUT

Remote control sensor

MENU Screen ON / OFF

Power Indicator

Each time the MENU button is pressed, the menu

screen will switch. (see page 23)

The Power Indicator will light.

• Power-OFF...... Indicator not illuminated

(The unit will still consume

some power as long as the

power cord is still inserted

into the wall outlet.)

Normal Viewing

SOUND

PICTURE

POS. /SIZE

SETUP

INPUT button

• Standby ........... Red

(INPUT signal selection)

(see page 15)

Orange (When “Slot power” is

set to “On”. See page 57)

Orange (Depending on the

type of the function board

installed, when the power is

supplied to the slot)

Main Power On / Off Switch

• Power-ON........ Green

• DPMS (POWER MANAGEMENT)

................... Orange (With PC input signal.

See page 42)

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Controls

Remote Control Transmitter

R button (see page 23)

Status button

Press the R button to return to previous menu screen.

Press the “Status” button to display

the current system status.

Standby (ON / OFF) button

Input label

The Plasma Display must ﬁrst be plugged into the wall

outlet and turned on at the power switch (see page 13).

Press ON to turn the Plasma Display On, from Standby

mode. Press OFF to turn the Plasma Display Off to

Standby mode.

Aspect mode (see page 18)

NANODRIFT SAVER operating

(see page 40)

Off timer

The off timer indicator is displayed only

when the off timer has been set.

Clock display (see page 57)

4:3

NANODRIFT

N button

(see page 27, 28, 29, 35)

10:00

POSITION buttons

OFF TIMER 90

SET UP button (see page 23)

SOUND button (see page 35)

DIRECT INPUT buttons

ACTION button

Press to make selections.

POS. /SIZE button

(see page 25)

Press the INPUT “1”, “2”, “3” or “PC”

input mode selection button to select

the INPUT mode. (see page 15)

This button is used to switch directly

to INPUT mode.

PICTURE button

(see page 28)

INPUT button

Press to select INPUT1, INPUT2,

INPUT3 and PC input SLOTS

sequentially. (see page 15)

When a dual input terminal board

is attached, A or B is displayed

depending on the selected input

signal. (Ex. INPUT1A, INPUT1B)

Channel Adjustment

This button cannot be used for this model.

Volume Adjustment

Press the Volume Up “+” or Down

“–” button to increase or decrease

the sound volume level.

Sound mute On / Off

Press this button to mute the sound.

Press again to reactivate sound.

Soundisalsoreactivatedwhenpoweris

turned off or volume level is changed.

OFF TIMER button

The Plasma Display can be preset

to switch to stand-by after a ﬁxed

period. The setting changes to 30

minutes, 60 minutes, 90 minutes and

0 minutes (off timer cancelled) each

time the button is pressed.

Numeric buttons

(see page 46)

ASPECT button

Press to adjust the aspect.

(see page 18)

When three minutes remain, “OFF

TIMER 3” will ﬂash.

The off timer is cancelled if a power

interruption occurs.

SURROUND button

The surround setting switches on

andoffeachtimetheSURROUND

OFF

button is pressed.

Remote ID lock (see page 46)

The beneﬁts of surround sound

are enormous. You can be

completely enveloped in sound;

just as if you were at a concert

hall or cinema.

Digital Zoom (see page 22)

MULTI Window buttons

(see page 19)

SURROUND ON

Download from Www.Somanuals.com. All Manuals Search And Download.

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format

picture.

Note:

Be aware that if you put the display in a public place for commercial purposes or a public showing and

then use the aspect mode select function to shrink or expand the picture, you may be violating the

for commercial purposes without the prior permission of the copyright holder.

Press repeatedly to move through the aspect options:

For details about the aspect mode, please see “List of Aspect Modes” (page 61).

For VIDEO (S VIDEO) signal input:

4:3

ZOOM

JUST

Panasonic AUTO

FULL

[from the unit]

Right side surface

ENTER/

Note:

When selecting an input slot that attaches BNC Dual Video Terminal

Board (TY-FB9BD), Panasonic AUTO cannot be selected.

VOL

The aspect mode changes each time the ENTER button is pressed.

For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):

For PC signal input:

4:3 ZOOM

FULL

4:3

ZOOM

FULL

JUST

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3

H-FILL

ZOOM

FULL

JUST

[During MULTI PIP Operations]

• Picture and Picture, Picture in Picture :

4:3

FULL

• Others

: Aspect switching is not possible.

Notes:

• Panasonic AUTO can be selected only during Video signal input.

• The aspect mode is memorized separately for each input terminal.

• Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent image

retention to remain on the Plasma Display Panel.

Panasonic AUTO

The display will automatically become enlarged (depending on the picture source), allowing you to view the picture at its maximum size.

Notes:

Panasonic AUTO

• Panasonic AUTO mode is designed to automatically adjust the

aspect ratio to handle a mix of 16:9 and 4:3 program material.

Certain 4:3 program material, such as stock market data screens,

may occasionally cause the image size to change unexpectedly.

When viewing such programs, it is recommended that the ASPECT

be set to 4:3.

• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with

FULL mode, the adjustment is not memorized. When exiting the

mode, the screen will return to a former adjustment.

For letter box image

Image is expanded

Changes in accordance with

the Panasonic AUTO mode

setting (see page 52).

For a 4:3 image

All Aspect mode

Set “All Aspect” to “On” in Options menu to enable the extended aspect mode (page 57). When All Aspect mode, the aspect

mode of pictures is switched as follows. For details about the aspect mode, please see “List of Aspect Modes” (page 61).

For VIDEO (S VIDEO) signal input:

4:3

Zoom1

Zoom2

Zoom3

Panasonic Auto

16:9

14:9

Just

Notes:

•

When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic Auto cannot be selected.

• In All Aspect mode, “Panasonic AUTO” is displayed as “Panasonic Auto”.

Download from Www.Somanuals.com. All Manuals Search And Download.

ASPECT Controls

For PC signal input:

4:3 Zoom

16:9

For SD signal input (525 (480) / 60i

4:3 Zoom1 Zoom2

•

60p, 625 (575) / 50i

•

50p):

Zoom3 16:9 14:9

Just

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2 4:3 (1) 4:3 (2)

MULTI PIP

You can display two pictures, such as a video image and computer image, in a two-screen display. (Use the remote control

for this operation. It cannot be performed with the buttons on the main unit.)

MULTI PIP SETUP

Set the functions and mode for two-screen display in “MULTI PIP SETUP” in the SET UP menu.

(see page 47)

Selecting the Display Mode

Each time this button is pressed, the screen changes.

Note:

The screen changes in the same way when “DISPLAY MODE” in “MULTI PIP SETUP” is changed. (see page 47)

During PIP:

During Advanced PIP:

One screen

Two screens (P AND P)

One screen

Advanced PIP

Main screen

input mode

INPUT1

–

Sub screen

input mode

Main screen

Sub screen

Main screen

Sub screen

Two screens (P IN P)

Two screens (P OUT P)

INPUT1

Note:

and

button operations are not available during

advanced PIP.

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI PIP

During Blend PIP (Composite Screen Function) :

A composite picture is displayed with the sub screen positioned over the main screen. For example, text data such as a

computer image can be displayed as a caption over a movie or still image.

One screen

FULL

P IN P

Transparent Function and Insertion Function

Two functions are available for blend PIP: the transparent function and the insertion function. Set these functions with

“TRANSPARENCY” or “INSERT” in “MULTI PIP SETUP”. (see page 47)

Transparent Function

Insertion Function

Data such as text are displayed transparently on the

background image.

The sub screen image is divided into transparent and non-

transparent areas, and only the non-transparent areas are

inserted and displayed on the background image.

Note:

Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the blend

PIP function to make a composite screen display, you may be violating the copyright under copyright law. It is prohibited

to show or alter the copyrighted materials of other people for commercial purposes without the prior permission of the

Swapping Screens

Each time this button is pressed, the main screen and sub screen are swapped.

Two screens

(P OUT P)

Two screens

(P IN P)

Two screens

(P AND P)

Main screen

Sub screen

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI PIP

Selecting the Target Screen for Operations

Each time this button is pressed, the target screen for operations changes.

Operations on

the main screen

Operations on

the sub screen

INPUT1

Main screen

Sub screen

Main screen input mode

Sub screen input mode

Notes:

• When operations are performed for the sub screen, the sub screen audio is played.

• If no operations are performed, the operation target returns to the main screen after about 5 seconds*.

You can also return to main screen operations by operating the remote control buttons (except for

* It takes more than 5 seconds if a slot mounted with a Dual HDMI Terminal Board (TY-FB10HMD) is selected.

Selecting the Sub Screen Position (During P IN P Display)

Each time this button is pressed, the sub screen position changes.

Note:

Some sub screen positions may hide the display of the menu screen.

Notes:

• Do not use the two-screen display for a long time. It will cause a permanent image retention to remain on the screen.

• If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.

• Sound output is from the picture which is selected in AUDIO OUT (PIP) (see page 35).

• In two-screen display, the same input mode cannot be selected for the main picture and sub picture.

• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the

pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed

on the main picture and depending on the two-screen display mode.

• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.

•

Computer screen picture is displayed in a simpliﬁed format, and it may not be possible to discern details on them satisfactorily.

Following combinations of two analog signals cannot be displayed simultaneously;

Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)

2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed in two-screen

display.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Zoom

This displays an enlargement of the designated part of the displayed image.

Display the operation guide.

EXIT

Press to access Digital Zoom.

The operation guide will be displayed.

During Digital Zoom, only the following buttons can be operated.

[Remote control]

[Unit]

Right side surface

POSITION / ACTION

button

ENTER/

VOL button

VOL

VOL button

INPUT

MUTE button

SURROUND button

OFF TIMER button

Select the area of the image to be enlarged.

Press on the enlargement location to select.

The cursor will move.

EXIT

Select the magniﬁcation required for the enlarged display.

Each time this is pressed, the magniﬁcation factor changes.

This is shown in the image being displayed.

s 1

s 2

s 3

s 4

Return to normal display (quit Digital Zoom).

Press to exit from the Digital Zoom.

Notes:

• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.

• The Digital Zoom function cannot be selected while in the following operation state:

“Multi-viewer” (P AND P, P OUT P, P IN P) operation. (see page 19)

When MULTI DISPLAY SETUP is ON (see page 45).

When PORTRAIT SETUP is ON (see page 48).

When SCREENSAVER (except for NEGATIVE IMAGE) is running. (see page 37)

• While Digital Zoom is in operation, “Adjusting POS. /SIZE” cannot be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Menu Displays

Remote Control

Unit

Press several times.

Display the menu screen.

Press to select.

(Example: PICTURE menu)

Each time the MENU button is pressed, the

menu screen will switch.

Normal Viewing

SOUND POS. /SIZE

PICTURE

SET UP

2 ^{Select the item.}

Select.

PICTURE

ENTER/

Press.

Select.

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

PICTURE

VOL

BRIGHTNESS

COLOR

(Example:

PICTURE menu)

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

NORMAL

OFF

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

Set.

3 ^Set.

ENTER/

Press.

Set.

VOL

4 ^{Exit the menu.}

Press several times.

Press.

Press

to return to the previous menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Menu Displays

Overview

Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

[

]

POS. /SIZE

SIGNAL

VIDEO

SET UP

SIGNAL

1/2

NORMAL

NORMALIZE

AUTO SETUP

H-POS

3D Y/C FILTER (NTSC)

COLOR SYSTEM

3 : 2 PULLDOWN

AUTO

OFF

4:3

100 Hz

OFF

SCREENSAVER

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

H-SIZE

V-POS

V-SIZE

Panasonic AUTO (4 : 3)

REFRESH RATE

NOISE REDUCTION

RGB

OFF

DOT CLOCK

CLOCK PHASE

1:1 PIXEL MODE

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

(see page 51-54)

OFF

SCREENSAVER

PRESENT TIME OF DAY 99:99

START

(see page 25-27)

(

)

ENGLISH US

SCROLLING BAR ONLY

OFF

FUNCTION

MODE

(see page 37, 38)

EXTENDED LIFE SETTINGS

EXPRESS SETTINGS

CUSTOM SETTINGS

RESET

SET UP

2/2

(see page 39-41)

MULTI DISPLAY SETUP

MULTI PIP SETUP

MULTI DISPLAY SETUP

PORTRAIT SETUP

SET UP TIMER

PRESENT TIME SETUP

DISPLAY ORIENTATION

MULTI DISPLAY SETUP

HORIZONTAL SCALE

VERTICAL SCALE

SEAM HIDES VIDEO

LOCATION

OFF

× 2

OFF

LANDSCAPE

AI-SYNCHRONIZATION

OFF

(see page 36-54)

(see page 45, 46)

PICTURE

MULTI PIP SETUP

SOUND

1/2

NORMAL

NORMALIZE

MULTI PIP

BLEND PIP

STANDARD

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

NORMAL

NORMALIZE

DISPLAY MODE

TRANSPARENCY

TRANSPARENCY LEVEL

INSERT

—

OFF

0 %

OFF

BASS

MID

TREBLE

BALANCE

SURROUND

TINT

INSERT LEVEL

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

OFF

MAIN

NORMAL

OFF

(see page 47)

AUDIO OUT (PIP)

SDI SOUND OUTPUT

2/2

PORTRAIT SETUP

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

LEFT CHANNEL

RIGHT CHANNEL

SOUND OUT

CHANNEL 1

OFF

PORTRAIT SETUP

SEAM HIDES VIDEO

VIEWING AREA

LOCATION

AI-SYNCHRONIZATION

OFF

16:9

LEVEL METER

OFF

(see page 28, 29)

OFF

(see page 48, 49)

(see page 35)

SET UP TIMER

PRESENT TIME OF DAY 99:99

ADVANCED SETTINGS

NORMAL

OFF

0:00

OFF

0:00

POWER ON FUNCTION

POWER ON TIME

POWER OFF FUNCTION

POWER OFF TIME

NORMALIZE

BLACK EXTENSION

INPUT LEVEL

GAMMA

2.2

OFF

(see page 36)

AGC

W/B HIGH R

W/B HIGH G

W/B HIGH B

W/B LOW R

W/B LOW G

W/B LOW B

PRESENT TIME SETUP

PRESENT TIME OF DAY MON 99:99

SET

DAY

MON

99:99

PRESENT TIME OF DAY

(see page 36)

(see page 28, 29)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting POS. /SIZE

During “VIDEO (S VIDEO)”, “Digital”,

“SDI” and “HDMI” input signal.

Press to display the POS. /SIZE menu.

Press to select the menu to adjust.

POS. /SIZE

NORMAL

NORMALIZE

AUTO SETUP

H-POS

H-SIZE

V-POS

V-SIZE

Press to adjust the menu.

OFF

1:1 PIXEL MODE

During “COMPONENT”, “RGB”

and “PC” input signal.

POS. /SIZE

NORMAL

NORMALIZE

AUTO SETUP

H-POS

Press to exit from adjust mode.

H-SIZE

V-POS

V-SIZE

DOT CLOCK

CLOCK PHASE

1:1 PIXEL MODE

Notes:

• Unadjustable items are grayed out.

OFF

Adjustable items differ depending on the input signal and the display mode.

• Adjustment details are memorized separately for different input signal formats.

(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i ·

50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are

memorized for each frequency.)

• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture

position movement cannot be controlled by the POS. /SIZE function.

• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When

exiting the mode, the screen will return to a former adjustment.

AUTO

SETUP

H-POS/V-POS, H-SIZE/V-SIZE, DOT CLOCK and CLOCK PHASE are automatically adjusted when the

RGB or PC signal is received.

This setting is enabled under the following conditions:

• This setting only support single screen display. Two screen display or multiple display are not supported.

• When “COMPONENT/RGB-IN SELECT” or “YUV/RGB-IN SELECT” in the “SET UP” menu (see page 52)

is set to “RGB”, this setting is enabled.

• When the signal is not PC format, this setting is enabled only if “OVER SCAN” (see page 26) is “OFF” or

“1:1 PIXEL MODE” (see page 27) is “ON”, and H-SIZE/V-SIZE is not automatically adjusted.

This setting will be invalid and will not work under the following conditions:

• Aspect is set to “JUST”

• “Display size” in the Options menu (see page 56) is set to “On”

Using Remote Control

Note:

To operate this function, please purchase remote controller sold separately.

Object model : N2QAYB000432

When

on the remote control is pressed, “AUTO SETUP” will be executed.

When AUTO SETUP does not work, “INVALID” is displayed.

Auto mode

When the “Auto Setup“ is set to “Auto” in the Options menu (see page 57), automatic position adjustment starts

• When the display power is turned ON.

• When the input signal is switched.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting POS. /SIZE

Notes:

• If the dot clock frequency is 162 MHz or higher, DOT CLOCK and CLOCK PHASE cannot be made.

• When digital RGB signal input, DOT CLOCK and CLOCK PHASE cannot be made.

• AUTO SETUP may not work when a cropped or dark image is input. In such case, switch to a bright image

with borders and other objects are clearly shown, and then try auto setup again.

• Depending on the signal, out of alignment may occur after AUTO SETUP. Carry out ﬁne tuning for the

position/size as required.

• If AUTO SETUP cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz,

1280×768@60Hz, and 1366×768@60Hz), pre-selecting the individual signal in “XGA MODE” (see page

52) may results in correct AUTO SETUP.

• AUTO SETUP does not work well when a signal such as additional information is superimposed out of

valid image period or intervals between synchronizing and image signals are short, or for image signal with

tri-level synchronizing signal added.

• If AUTO SETUP cannot adjust correctly, select “NORMALIZE” once and press ACTION ( ) then adjust

POS. /SIZE manually.

H-POS

H-SIZE

Adjust the horizontal position.

Adjust the horizontal size.

V-POS

V-SIZE

Adjust the vertical position.

Adjust the vertical size.

DOT

(During “COMPONENT”, “RGB” and “PC” input signal)

CLOCK

Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,

adjust so that any such noise is minimized.

CLOCK

PHASE

(During “COMPONENT”, “RGB” and “PC” input signal)

Eliminate the ﬂickering and distortion.

OVER

SCAN

Turn image over scan ON/OFF.

Conﬁgurable signals are as follows:

525i, 525p, 625i, 625p, 750/60p, 750/50p (Component Video, RGB, DVI, SDI, HDMI)

OFF

Notes:

• When “OFF” is set, “H-SIZE” and “V-SIZE” cannot be adjusted.

• When the “Display size” is set to “On” in the Options menu, this setting will be invalid. (see page 56)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting POS. /SIZE

1:1 PIXEL MODE Adjusts the display size when 1125i, 1125p or 1250i signal is input.

Notes:

• Select ON when you would like to replay 1920 × 1080 input signal.

• Applicable input signal;

1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i

• Select OFF when ﬂickering is shown around the image.

• H-SIZE and V-SIZE cannot be adjusted when ON is selected.

OFF

1:1 PIXEL MODE When the input signal is a 2k1k signal (2048×1080 / 24p, 2048×1080 / 24sF), the display size is

(2k1k)

adjusted as follows.

(For 2k1k signals)

OFF

ON (LEFT)

ON (CENTER)

ON (RIGHT)

Note:

2k1k signals can only be received when the Dual Link HD-SDI Terminal Board (TY-FB11DHD) is installed.

NORMALIZE

Helpful Hint (

Normalization)

While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or theACTION

( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE Adjustments

Press to display the PICTURE menu.

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input

and menu setting.

PICTURE

Press the left or right button to switch between modes.

STANDARD

MONITOR

DYNAMIC

CINEMA

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

STANDARD

For viewing in standard (evening lighting) environments.

This menu selects the normal levels of BRIGHTNESS

and PICTURE.

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

NORMAL

OFF

DYNAMIC

For viewing in brighter environments.

This menu selects higher than normal levels of

BRIGHTNESS and PICTURE.

CINEMA

Ideal for movies.

MONITOR

Press to enter Advanced

Settings.

For use when creating broadcast or movie content. With

this picture, even if the overall average picture level (APL)

changes, the brightness of areas with the same signal

level does not change.

ADVANCED SETTINGS

Enables ﬁne picture adjustment at a professional

level (see next page).

Notes:

● When “MONITOR” is selected in PICTURE MENU, the

following menu items cannot be set.

PICTURE menu: PICTURE

ADVANCED SETTINGS

NORMAL

NORMALIZE

EXTENDED LIFE SETTINGS: PEAK LIMIT (see page 40)

SET UP menu: POWER SAVE (see page 42)

BLACK EXTENSION

INPUT LEVEL

GAMMA

MULTI DISPLAY SETUP menu

AI-SYNCHRONIZATION (see page 46)

2.2

OFF

PORTRAIT SETUP menu

AI-SYNCHRONIZATION (see page 49)

AGC

● If you would like to change the picture and color of the

selected PICTURE menu to something else, adjust using

the items in the PICTURE menu. (see next page)

W/B HIGH R

W/B HIGH G

W/B HIGH B

W/B LOW R

W/B LOW G

W/B LOW B

Press the left or right button to switch between modes.

NORMAL

COOL

WARM

COLOR MANAGEMENT ON

Enables vivid color adjustment automatically.

NORMALIZE

Helpful Hint (

Normalization)

While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION

( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE Adjustments

Notes:

Item

Effect

Adjustments

• “COLOR” and “TINT” settings cannot be

adjusted for “RGB/PC” input signal.

Adjusts the proper picture contrast.

PICTURE

Less

Brighter

•

You can change the level of each function

(PICTURE, BRIGHTNESS, COLOR, TINT,

SHARPNESS) for each PICTURE MENU.

ThesettingdetailsforSTANDARD,DYNAMIC

and CINEMA respectively are memorized

separately for each input terminal.

Adjusts for easier viewing of dark pictures

such as night scenes and black hair.

BRIGHTNESS

COLOR

Darker

Less

•

Adjusts color saturation.

•

The “TINT” setting can be adjusted for NTSC signal

only during “VIDEO (S VIDEO)” input signal.

In PICTURE, there is not a noticeable change

even when contrast is increased with a bright

picture or reduced with a dark picture.

Adjusts for natural ﬂesh tones.

Adjusts picture sharpness.

TINT

Reddish

Less

Greenish

SHARPNESS

ADVANCED SETTINGS

Item

Effect

Details

BLACK

EXTENSION

Adjusts the dark shades of the image in gradation.

Less

INPUT

LEVEL

Adjustment of parts which are extremely bright and hard to see.

S+ CURVE*¹

S CURVE

2.0

2.2

2.5

2.6*²

*1 When “PICTURE MENU” is set to “DYNAMIC”, GAMMA “S+ CURVE” can be

selected. When 2k1k signals are received with the Dual Link HD-SDI Terminal

Board (TY-FB11DHD), “S+ CURVE” cannot be selected.

GAMMA

Down

*2 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-

FB11DHD), GAMMA “2.6” can also be selected.

AGC

Increases the brightness of dark signal automatically.

Adjusts the white balance for light red areas.

Adjusts the white balance for light green areas.

Adjusts the white balance for light blue areas.

Adjusts the white balance for dark red areas.

Adjusts the white balance for dark green areas.

Adjusts the white balance for dark blue areas.

OFF

Less

W/B HIGH R

W/B HIGH G

W/B HIGH B

W/B LOW R

W/B LOW G

W/B LOW B

Notes:

• Carry out “W/B” adjustment as follows.

1. Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.

2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.

3. Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

• The adjustment values are memorized separately for each input terminal.

• The adjustment range values should be used as an adjustment reference.

NORMALIZE

Helpful Hint (

Normalization)

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any time

or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Proﬁles

Up to 8 combinations of picture adjustment values (in the PICTURE menu and ADVANCED SETTINGS) can be stored in

the display memory as proﬁles and applied as needed, for a convenient way to enjoy your preferred picture settings.

PICTURE

NORMAL

NORMALIZE

CINEMA

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

NORMAL

OFF

PICTURE

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

Save proﬁles (page 31)

Load proﬁles (page 32)

Edit proﬁles (page 32)

NORMAL

NORMALIZE

CINEMA

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

NORMAL

OFF

Options

1/3

Weekly Command Timer

Memory lock

Onscreen display

Save proﬁles

Save the picture adjustment

values in the MEMORY1

proﬁle

Lock proﬁles (page 33, 34)

Off

Initial INPUT

Off

Initial VOL level

Maximum VOL level

INPUT lock

MY PICTURE

MEMORY1

MEMORY2

MEMORY3

MEMORY4

Edit the proﬁle

Delete or rename

the proﬁle

Off

MEMORY2

MEMORY3

MEMORY4

Button lock

Remocon User level

Locked proﬁle

MEMORY8

Load the proﬁle

Apply the MEMORY1

proﬁle

Original picture

Custom picture

PICTURE

NORMAL

NORMALIZE

STANDARD

CINEMA

PICTURE MENU

PICTURE

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

BRIGHTNESS

COLOR

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

NORMAL

OFF

NORMAL

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Proﬁles

Saving proﬁles

Follow these steps to save picture adjustment values as proﬁles.

Note:

When the settings are locked in “EXTENDED LIFE SETTINGS”, proﬁles cannot be saved.

Enter a name for the proﬁle.

[Entering proﬁle names]

Specify the picture quality in the PICTURE menu and

ADVANCED SETTINGS. (see page 28, 29)

Proﬁle names can be up to 16 characters.

To enter text, select characters in the on-screen

keyboard.

Edit the default profile name in the text box as

desired.

In the PICTURE menu, select “MEMORY SAVE”.

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

select

2 access

MEMORY NAME INPUT

select

█

MEMORY1

”

ALL DELETE

DELETE

Select a proﬁle name for saving the picture adjustment

values.

[

–

]

2 set

’

SPACE

}

;

(

)

{

select

MEMORY SAVE

CANCEL

[

]

MEMORY1

MEMORY2

MEMORY3

MEMORY4

2 set

Example: Specifying “MY PICTURE”

Select “ALL DELETE”.

█

MEMORY1

All text is deleted.

To delete individual characters, select “DELETE”.

Proﬁles are labeled with these icons to indicate their

locked status. (see page 33)

[ ], [ ]:Settings can be saved in this proﬁle.

[ ], [ ]:Settings cannot be saved in this proﬁle.

Select “M”.

█

Repeat this process to enter the next character.

Select “OK”.

Select “Y”.

█

select

MEMORY SAVE

Select “SPACE”.

█

SAVE THE ADJUSTED VALUE IN MEMORY1

2 set

CANCEL

When you ﬁnished entering the proﬁle name, select

“OK”.

To cancel saving the proﬁle, select “CANCEL”.

MEMORY NAME INPUT

select

█

MY PICTURE

”

ALL DELETE

DELETE

[

–

]

2 set

’

SPACE

}

;

(

)

{

CANCEL

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Proﬁles

Loading proﬁles

Load proﬁles and apply the picture adjustment values to the display as follows.

Notes:

• Loaded proﬁles are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN). (see page 15)

• When the settings are locked in “EXTENDED LIFE SETTINGS”, proﬁles cannot be loaded.

Select the proﬁle to load.

In the PICTURE menu, select “MEMORY LOAD”.

select

MEMORY LOAD

select

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

[

]

MEMORY1

MEMORY2

MEMORY3

2 set

2 access

Proﬁles are labeled with these icons to indicate their

locked status. (see page 33)

Editing proﬁles

Delete or rename proﬁles as follows.

Note:

Locked proﬁles cannot be deleted.

Locked proﬁles cannot be renamed.

In the PICTURE menu, select “MEMORY EDIT”.

select

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

2 access

Select “MEMORY NAME CHANGE”.

Select “MEMORY DELETE”.

select

MEMORY EDIT

select

MEMORY EDIT

MEMORY DELETE

MEMORY NAME CHANGE

2 set

MEMORY DELETE

MEMORY NAME CHANGE

2 set

Select the proﬁle to rename.

Select the proﬁle to delete.

To delete all proﬁles, select “ALL DELETE”.

select

MEMORY NAME CHANGE

[

]

MEMORY1

MEMORY2

MEMORY3

2 set

select

MEMORY DELETE

[

]

MEMORY1

MEMORY2

MEMORY3

ALL DELETE

2 set

Enter a name for the proﬁle.

Entering proﬁle names

page 31

MEMORY NAME INPUT

select

█

MEMORY1

”

ALL DELETE

DELETE

Select “OK”.

[

–

]

2 set

select

’

SPACE

MEMORY DELETE

}

;

(

)

{

CANCEL

DELETE THE MEMORY1 DATA.

OK CANCEL

2 set

When you ﬁnished entering the proﬁle name, select “OK”.

To cancel renaming the proﬁle, select “CANCEL”.

CANCEL

select

2 set

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Proﬁles

Locking proﬁles

You can lock saved proﬁles to restrict operations when the proﬁles are loaded. You can also set passwords.

Notes:

• When the lock is set in “EXTENDED LIFE SETTINGS”, proﬁle cannot be locked.

• If proﬁle is locked, the menu operations of “EXTENDED LIFE SETTINGS” are restricted. (see page 40)

Display the menu screen. (see page 55)

Select “Ok”.

Input password

select

Select “Memory lock”.

Options

1/3

select

Cancel

2 set

Weekly Command Timer

2 access

Memory lock

Onscreen display

Initial INPUT

Off

Select the proﬁle and specify the desired lock setting.

Off

Initial VOL level

Maximum VOL level

INPUT lock

select

2 adjust

Memory lock

Off

Lock1

Off

MEMORY1

MEMORY2

MEMORY3

MEMORY4

isf Mode

Button lock

Remocon User level

Off

Enter a 4-digit password.

The default password is “0123”.

Change password

Exit the menu.

Once a proﬁle is locked, the following operations are restricted when the proﬁle is loaded.

Setting Editing the Proﬁle EditingPictureAdjustmentValuesviatheMenu Saving Picture Adjustment Values

(MEMORY EDIT)

(PICTURE menu, ADVANCED SETTINGS)

(MEMORY SAVE)

Off (unlocked) Allowed

Allowed

Lock1

Lock2

Prohibited

Prohibited (picture adjustment values Allowed

are shown)

Prohibited (picture adjustment values Prohibited

are hidden)

Loading locked proﬁles…

In the PICTURE menu, proﬁles are labeled with these icons to indicate their locked status.

PICTURE

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

PICTURE

Picture adjustment values in the PICTURE menu cannot be changed, except for the “PICTURE MENU”. Once you edit

the “PICTURE MENU” setting, you can edit “PICTURE”, “BRIGHTNESS”, and other picture adjustment values.

Lock1

Lock2

Picture adjustment values are shown.

Picture adjustment values are hidden.

PICTURE

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

PICTURE MENU

PICTURE

BRIGHTNESS

COLOR

Can be

speciﬁed.

Can be

speciﬁed.

TINT

Cannot be

speciﬁed.

Cannot be

speciﬁed.

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

NORMAL

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Proﬁles

Follow steps 1–4 in the previous procedure,

<Locking and unlocking proﬁles>.

Enter a new 4-digit password.

Select “Change password”.

Memory lock

select

Select “Ok”.

Lock1

Off

select

MEMORY1

MEMORY2

MEMORY3

MEMORY4

isf Mode

Input new password

2 access

Off

2 set

Cancel

Off

Change password

Exit the menu.

Note:

Make a note of the new password to remember it.

Switches to “PICTURE MENU” mode display.

Follow steps 1–4 in the previous procedure,

<Locking and unlocking proﬁles>.

Select “isf Mode”.

select

Memory lock

2 adjust

Lock1

Off

MEMORY1

MEMORY2

MEMORY3

MEMORY4

isf Mode

Off

Change password

Specify “On” or “Off”.

Exit the menu.

Specifying “On” for isf Mode changes the “PICTURE MENU” mode display as follows.

“PICTURE MENU” mode display

isf Mode: Off

STANDARD

DYNAMIC

CINEMA

MONITOR

isf Mode: On

STANDARD

isf Mode DAY

isf Mode NIGHT

MONITOR

PICTURE

NORMAL

NORMALIZE

STANDARD

PICTURE MENU

PICTURE

BRIGHTNESS

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND Adjustment

1/2

SOUND

Press to display the SOUND menu.

NORMAL

NORMALIZE

BASS

MID

TREBLE

BALANCE

SURROUND

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

OFF

AUDIO OUT (PIP)

MAIN

Press to exit from adjust mode.

Item

BASS

Details

Adjusts low pitch sounds.

Adjusts normal sounds.

Adjusts pitch sound.

MID

TREBLE

BALANCE

SURROUND

Adjusts left and right volumes.

Select ON or OFF.

MAIN: Selects main picture sound.

SUB: Selects PIP frame sound.

INPUT1

AUDIO OUT (PIP)

Musical note ♪ is displayed on right side of the audio output screen label.

NORMALIZE

Helpful Hint (

Normalization)

While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or theACTION

( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

SDI SOUND OUTPUT

This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-

FB11DHD) is installed to the unit.

Item

Details

SDI SOUND OUTPUT

2/2

CHANNEL 1 to CHANNEL 16

LEFT CHANNEL

Selects left audio channel.

CHANNEL 1 to CHANNEL 16

Selects right audio channel.

CHANNEL 1

OFF

LEFT CHANNEL

RIGHT CHANNEL

SOUND OUT

RIGHT CHANNEL

SOUND OUT

LEVEL METER

OFF

ON: Enables audio output.

Notes:

OFF: Disables audio output.

• This menu is available only when selecting a

slot that HD-SDI Terminal Board with audio

(TY-FB10HD) or Dual Link HD-SDI Terminal

Board (TY-FB11DHD)is installed.

• This menu is unavailable when 2-picture

display mode is active.

OFF

1-8CH

9-16CH

Sets audio channels to show in the audio level meter.

8 channels are displayed in the audio level meter; 4 channels

each on both right and left sides of the display.

OFF: Hides the audio level meter.

1-8CH: Displays the audio level meter (1-8ch)

9-16CH: Displays the audio level meter (9-16ch)

LEVEL METER

Download from Www.Somanuals.com. All Manuals Search And Download.

PRESENT TIME SETUP / SET UP TIMER

The timer can switch the Plasma Display ON or OFF.

Before attempting Timer Set, conﬁrm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME /

POWER OFF TIME.

SET UP

2/2

Press to display the SET UP menu.

MULTI DISPLAY SETUP

MULTI PIP SETUP

PORTRAIT SETUP

Press to select SET UP TIMER or PRESENT TIME SETUP.

SET UP TIMER

PRESENT TIME SETUP

DISPLAY ORIENTATION

LANDSCAPE

Press to display the SET UP TIMER screen or PRESENT

TIME SETUP screen.

PRESENT TIME SETUP

Press to select DAY or PRESENT TIME OF DAY.

PRESENT TIME SETUP

PRESENT TIME OF DAY MON 99:99

SET

DAY

Press to set up DAY or PRESENT TIME OF DAY.

button: Forward

button: Back

Notes:

MON

99:99

PRESENT TIME OF DAY

• Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute.

• Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes.

Press to select SET.

Press to store PRESENT TIME SETUP.

Notes:

• SET cannot be selected unless PRESENT TIME OF DAY is set.

• Unless setting the present time other than “99:99”, DAY setting is invalid.

• The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the display turned

off for about 7 days for the following reasons:

Pressing

switch of the unit to turn off the display.

Disconnecting the AC cord.

Interruption of power supply.

SET UP TIMER

Press to select POWER ON TIME / POWER OFF TIME.

SET UP TIMER

PRESENT TIME OF DAY 99:99

Press to set up POWER ON TIME / POWER OFF TIME.

OFF

0:00

OFF

0:00

POWER ON FUNCTION

POWER ON TIME

POWER OFF FUNCTION

POWER OFF TIME

button: Forward

button: Back

Notes:

• Pressing “ ” or “ ” button once changes POWER ON TIME

/ POWER OFF TIME 1 minute.

• Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF

TIME by 15 minutes.

Press to select POWER ON FUNCTION / POWER OFF FUNCTION.

Press to select ON.

Note:

Timer function will not work unless “PRESENT TIME OF DAY” is set.

Download from Www.Somanuals.com. All Manuals Search And Download.

SCREENSAVER (For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for any length of time.

If the display must remain on, a SCREENSAVER should be used.

SET UP

SIGNAL

1/2

Press to display the SET UP menu.

Press to select the SCREENSAVER.

SCREENSAVER

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

Press to select the SCREENSAVER screen.

RGB

INPUT LABEL

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

(

)

ENGLISH US

FUNCTION selection

Press to select the FUNCTION.

SCREENSAVER

PRESENT TIME OF DAY 99:99

START

Press to select the desired function.

SCROLLING BAR ONLY

OFF

FUNCTION

MODE

NEGATIVE IMAGE

WHITE SCREEN

SCROLLING BAR ONLY

OVERLAY SCROLLING BAR

NEGATIVE IMAGE

: A negative image will be displayed on the screen.

SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.

OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar

will scroll on it.

WHITE SCREEN

: The whole screen will be white.

Note: OVERLAY SCROLLING BAR is not effective during two screen display.

MODE selection

Off

Press to select the

MODE.

Press to select each

mode items.

INTERVAL

: Operates when SHOW DURATION and SAVER

DURATION are set up and those times arrive.

: Operates when START TIME and FINISH TIME

are set up and those times arrive.

TIME OF DAY

STANDBYAFTER SCR SAVER: Operates while SCREENSAVER DURATION,

and display enters standby mode.

: Operates when START is selected and the

ACTION ( ) button is pressed.

START setting

When the MODE is set to ON, press to select START.

Press to start SCREENSAVER.

The menu screen will disappear and the SCREENSAVER will be activated. To stop the

SCREENSAVER under ON, press the R button or any buttons on the main unit.

Note: When the display is turned off, the SCREENSAVER will be deactivated.

Download from Www.Somanuals.com. All Manuals Search And Download.

SCREENSAVER (For preventing image retention)

Setup of SCREENSAVER Time

After selecting TIME OF DAY, INTERVAL or STANDBYAFTER SCR SAVER, the relevant Time Setup will become available

for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)

Press to select START TIME / FINISH TIME (when TIME OF

DAY is selected).

SCREENSAVER

PRESENT TIME OF DAY 15:00

Press to select SHOW DURATION / SAVER DURATION

(when INTERVAL is selected).

Press to select SCREENSAVER DURATION (when

STANDBY AFTER SCR SAVER is selected).

Press to setup.

START

FUNCTION

MODE

START TIME

FINISH TIME

SCROLLING BAR ONLY

TIME OF DAY

6:15

12:30

button: Forward

button: Back

SCREENSAVER

PRESENT TIME OF DAY 15:00

START

Notes:

SCROLLING BAR ONLY

INTERVAL

FUNCTION

MODE

• Pressing “ ” or “ ” button once changes the Time 1 minute.

[However, switching occurs every 15 minutes when Periodic Time is selected.]

• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.

• “SCREENSAVER DURATION” of the “STANDBYAFTER SCR SAVER” can

be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER

SCR SAVER” will not be activated.

12:00

3:00

SHOW DURATION

SAVER DURATION

SCREENSAVER

PRESENT TIME OF DAY 15:00

START

SCROLLING BAR ONLY

STANDBY AFTER SCR SAVER

FUNCTION

MODE

Note: Timer function will not work unless “PRESENT TIME OF DAY” is set.

6:15

SCREENSAVER DURATION

Download from Www.Somanuals.com. All Manuals Search And Download.

Reduces screen image retention

EXTENDED LIFE SETTINGS

The following settings are setup to reduce image retention:

SET UP

SIGNAL

1/2

EXTENDED LIFE SETTINGS

Set to the recommended value

Set individually

EXPRESS SETTINGS

CUSTOM SETTINGS

RESET

SCREENSAVER

EXTENDED LIFE SETTINGS

Reset to the factory settings

COMPONENT/RGB-IN SELECT

RGB

EXTENDED LIFE SETTINGS

INPUT LABEL

POWER SAVE

OFF

RECOMMENDED SETTINGS

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

PICTURE MENU

PICTURE

SIDE BAR ADJUST

NANODRIFT SAVER

PEAK LIMIT

DYNAMIC

BRIGHT

HIGH MID

OFF

(

)

ENGLISH US

Image Retention Reduction Menu

LOCK SETTINGS

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

UNLOCK

Image Retention Reduction Menu

“EXTENDED LIFE SETTINGS” enables you to set the following 5 menus (Image Retention Reduction Menu) as

recommended values or set them individually.

PICTURE MENU

PICTURE

“PICTURE MENU” and “PICTURE” are same as “PICTURE” menu items (see page 28). The settings of this menu will be

reﬂected to the “PICTURE” menu.

side bars

4:3 mode

SIDE BAR ADJUST

Do not display a picture in 4:3 mode for an extended period,

as this can cause an image retention to remain on the side

bars on either side of the display ﬁeld.

To reduce the risk of such an image retention, illuminate the

side bars.

image

retention

This function may be applicable to the non-picture area.

Non picture area

OFF:

DARK: Make it dark gray.

MID: Make it gray.

BRIGHT: Make it light gray.

Darken both ends.

P OUT P

P AND P

Notes:

• To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT.

• The side bar may ﬂash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode

will reduce such ﬂashing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reduces screen image retention

NANODRIFT SAVER

Moves the display position of the screen slightly to reduce image retention on the display panel.

OFF:

NANODRIFT SAVER does not operate.

MIN–MAX:NANODRIFT SAVER operates. The display position of the screen moves at set time intervals. You can set

the screen movement range. Some of the screen may appear to be missing as a result of this operation.

If you change the value, a mask is displayed in the range where the picture is missing as a result of position

movement.

If this is set to other than “OFF”, “NANODRIFT” is displayed below the aspect

mode display.

FULL

NANODRIFT

Note:

This function does not work in the following cases.

When “MULTI DISPLAY SETUP” is set to “ON”

When “PORTRAIT SETUP” is set to “ON”

When in digital zoom mode

PEAK LIMIT

ON: Suppresses image contrast (peak brightness).

Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 60)

EXTENDED LIFE SETTINGS when proﬁle is locked

If proﬁle is locked with “Memory lock” of the Options menu, the operations of this settings menu are restricted

as shown below. “Locking proﬁles”

page 33

EXPRESS SETTINGS: Cannot be set.

CUSTOM SETTINGS: “PICTURE MENU”, “PICTURE” and “LOCK SETTINGS” cannot be set.

RESET:

“PICTURE MENU” and “PICTURE” are not reset.

EXPRESS SETTINGS

Set the “Image Retention Reduction” menu to the recommended settings.

All menus will be locked.

PICTURE MENU: STANDARD

PICTURE: 10

SIDE BAR ADJUST: BRIGHT

NANODRIFT SAVER: HIGH MID

PEAK LIMIT: ON

Select “EXPRESS SETTINGS”.

Select “YES”.

select

EXTENDED LIFE SETTINGS

EXPRESS SETTINGS

CUSTOM SETTINGS

RESET

APPLY TO CURRENT INPUT

YES NO

2 access

2 set

Select the input to apply the settings.

select

EXTENDED LIFE SETTINGS

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

2 set

Download from Www.Somanuals.com. All Manuals Search And Download.

Reduces screen image retention

CUSTOM SETTINGS

Set the individual “Image Retention Reduction” menu.

Whenamenuislocked,itisgrayedoutandcannotbeset.

“PICTURE MENU” and “PICTURE” will no longer

be able to set in the “PICTURE” menu, and they are

labeled with icon to indicate their locked status. Also,

“NORMALIZE”, “MEMORY SAVE” and “MEMORY

LOAD” are not available.

Select “CUSTOM SETTINGS”.

select

EXTENDED LIFE SETTINGS

EXPRESS SETTINGS

CUSTOM SETTINGS

RESET

2 access

To set each menu to the recommended setting:

2 _{Select “RECOMMENDED SETTINGS”.}

PICTURE

NORMAL

NORMALIZE

select

EXTENDED LIFE SETTINGS

DYNAMIC

PICTURE MENU

PICTURE

RECOMMENDED SETTINGS

BRIGHTNESS

COLOR

TINT

SHARPNESS

COLOR TEMP

COLOR MANAGEMENT

ADVANCED SETTINGS

PICTURE MENU

PICTURE

SIDE BAR ADJUST

NANODRIFT SAVER

PEAK LIMIT

DYNAMIC

BRIGHT

HIGH MID

OFF

2 set

NORMAL

OFF

LOCK SETTINGS

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

UNLOCK

MEMORY SAVE

MEMORY LOAD

MEMORY EDIT

Each menu will be set as same as

the “EXPRESS SETTINGS”.

EXTENDED LIFE SETTINGS

Set each menu.

Select the input to apply the settings.

select

EXTENDED LIFE SETTINGS

select

RECOMMENDED SETTINGS

2 adjust

PICTURE MENU

PICTURE

SIDE BAR ADJUST

NANODRIFT SAVER

PEAK LIMIT

LOCK SETTINGS

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

DYNAMIC

BRIGHT

HIGH MID

OFF

PICTURE MENU

PICTURE

DYNAMIC

2 set

SIDE BAR ADJUST

NANODRIFT SAVER

PEAK LIMIT

BRIGHT

HIGH MID

OFF

UNLOCK

LOCK SETTINGS

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

LOCK

To lock each menu setting:

Select “YES”.

4 _{Set the “LOCK SETTINGS” to “LOCK”.}

select

EXTENDED LIFE SETTINGS

select

EXTENDED LIFE SETTINGS

APPLY TO CURRENT INPUT

YES NO

RECOMMENDED SETTINGS

2 adjust

PICTURE MENU

PICTURE

DYNAMIC

2 set

SIDE BAR ADJUST

NANODRIFT SAVER

PEAK LIMIT

BRIGHT

HIGH MID

OFF

LOCK SETTINGS

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

LOCK

RESET

Reset the “Image Retention Reduction” menu to the factory settings. Each menu will be unlocked.

Select “YES”.

Select “RESET”.

EXTENDED LIFE SETTINGS

select

RESET CURRENT INPUT

YES NO

EXPRESS SETTINGS

CUSTOM SETTINGS

RESET

2 access

2 set

Select the input to reset the settings.

select

EXTENDED LIFE SETTINGS

RESET CURRENT INPUT

RESET ALL INPUTS

2 set

Download from Www.Somanuals.com. All Manuals Search And Download.

Reduces power consumption

• POWER SAVE:

When this function is turned ON, luminous level of the Plasma Display is suppressed, so

power consumption is reduced.

• STANDBY SAVE:

When this function is turned ON, power consumption of the microcomputer is reduced during

power supply standby (see page 13, 16, 17), so standby power of the set is reduced.

When this function is set to ON, it operates under the following conditions to turn the power

on or off automatically.

• POWER MANAGEMENT:

When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal

input:

→Power is turned off (standby); the power indicator lights up orange.

When pictures (HD/VD sync signals) are subsequently detected:

→Power is turned on; the power indicator lights up green.

Notes:

• This function operates only during PC signal input.

• This function is invalid during input from PC Input Terminal Board (TY-42TM6P).

• This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT”

is set to “RGB” and during normal viewing (one picture screen).

Equipment power supply is turned OFF when there is no signal.

When this is set to “ON”, the power supply of the unit goes Off 10 minutes after the input

signals stop.

• AUTO POWER OFF:

Note:

This function is effective during normal viewing (one picture screen) for input signals except

PC IN terminal.

Press to select

“POWER SAVE”

“STANDBY SAVE”

“POWER MANAGEMENT”

“AUTO POWER OFF”.

SET UP

SIGNAL

SCREENSAVER

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

1/2

RGB

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Press to select “ON” or “OFF”.

OFF

Off

(

)

ENGLISH US

Press to exit from SET UP.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Input labels

This function can change the label of the Input signal to be displayed.

Select the input signal which you would like to change its label before customizing the Input labels. (see page 15, 17)

SET UP

1/2

Press to select INPUT LABEL.

Press to change the INPUT LABEL.

SIGNAL

SCREENSAVER

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Note:

OFF

While selecting a Input signal through Optional Terminal Board connected to Slot 1,

Slot 2 and Slot 3, the Input label will depend on each Optional Terminal Board.

(

)

ENGLISH US

INPUT LABELS for SLOT 1, 2, 3 and PC IN:

[SLOT1] INPUT1 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB

[SLOT2] INPUT2 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB

[SLOT3] INPUT3/ DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB

[PC IN] PC / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB

When BNC Dual Video Terminal Board (TY-FB9BD) is used, an “A” or “B” is added at the end of each input label, depending

on the input selected (see below).

Addition sign

Selected Input

“A”

“B”

Composite

S VIDEO

Selecting the On-Screen Menu Language

Press to display the SET UP menu.

Press to select OSD LANGUAGE.

Press to select your preferred language.

Selectable languages

SET UP

1/2

SIGNAL

SCREENSAVER

EXTENDED LIFE SETTINGS

English(UK)

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)

.......(Russian)

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

OFF

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

(

)

ENGLISH US

Русский

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY ORIENTATION

Sets the fan control and the display style of on-screen menu for vertical installation.

SET UP

2/2

Press to display the SET UP menu.

MULTI DISPLAY SETUP

MULTI PIP SETUP

Press to select DISPLAY ORIENTATION.

PORTRAIT SETUP

SET UP TIMER

PRESENT TIME SETUP

DISPLAY ORIENTATION

Press to select “LANDSCAPE” or “PORTRAIT”.

LANDSCAPE

Press to exit from adjust mode

LANDSCAPE

PORTRAIT

Fan control for horizontal installation. Fan control for vertical installation. On-screen menu will be rotated

90 degrees counterclockwise to be suitable for the setting.

Notes:

• If the display is installed vertically, the power switch should be located at the bottom.

• Fan control will be switched when turning on the unit next time.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for MULTI DISPLAY

By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.

For this mode of operation, each plasma display has to be set up with a Display number to determine its location.

(Example)

group of 4 (2 × 2) group of 9 (3 × 3)

group of 16 (4 × 4)

group of 25 (5 × 5)

How to setup MULTI DISPLAY

SET UP

2/2

Press to display the SET UP menu.

MULTI DISPLAY SETUP

MULTI PIP SETUP

PORTRAIT SETUP

SET UP TIMER

Press to select the MULTI DISPLAY SETUP.

PRESENT TIME SETUP

DISPLAY ORIENTATION

LANDSCAPE

Press to display the “MULTI DISPLAY SETUP” menu.

Press to select the MULTI DISPLAY SETUP.

Press to select “ON” or “OFF”.

MULTI DISPLAY SETUP

HORIZONTAL SCALE

VERTICAL SCALE

SEAM HIDES VIDEO

LOCATION

OFF

× 2

OFF

AI-SYNCHRONIZATION

OFF

Item

Details

Select “ON” or “OFF”.

MULTI DISPLAY SETUP

Note: If you set MULTI DISPLAY SETUP to ON, PORTRAIT SETUP will be unavailable.

HORIZONTAL SCALE

VERTICAL SCALE

Select “× 1”, “× 2”, “× 3”, “× 4”, “× 5”.

Select “ON” or “OFF”.

To hide joints between displays.

To show joints between displays.

SEAM HIDES VIDEO

Suitable for moving image display.

Suitable for still image display.

OFF

Select the required arrangement number. (A1-E5 : Refer to the following)

Display Number locations for each arrangement.

(Examples)

( 2 × 1) ( 2 × 3 )

( 4 × 2 )

( 4 × 4 )

( 5 × 5 )

LOCATION

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for MULTI DISPLAY

Item

Details

Select “OFF” or “ON”.

Equalize the brightness of all the

displays.

The brightness depends on each

display’s setting.

AI-SYNCRONIZATION

OFF

Note:

If you set AI-SYNCRONIZATION to ON, the following menus will be unavailable and these

settings will be ﬁxed to the initial values.

PICTURE menu: COLOR, TINT, INPUT LEVEL (ADVANCED SETTINGS)

Press to exit from adjust mode.

ID Remote Control Function

You can set the remote control ID when you want to use this remote control on one of several different displays.

Switch

on the right side.

Press the

Press one of

button on the remote control.

for the tens digit setting.

for the units digit setting.

Notes:

• The numbers in 2, 3 and 4 should be set up quickly.

• Adjustable ID number range is 0 - 99.

• If a number button is pressed more than two times, the ﬁrst two numbers become the ID number

for the remote control.

ID remote control button operation

The operation is the same as normal remote control except for the

button.

ID Cancellation

Press

button on remote control. (This has the same effect as pressing the

buttons at the same time.)

Notes:

• Set the Remote ID “On” to operate the ID remote control.

If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.

(see page 56)

• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not

the same as the ID select number (see page 56).

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI PIP SETUP

Set the two-screen display function that is activated when

is pressed.

SET UP

2/2

Press to display the SET UP menu.

MULTI DISPLAY SETUP

MULTI PIP SETUP

PORTRAIT SETUP

SET UP TIMER

Press to select the MULTI PIP SETUP.

Press to display the “MULTI PIP SETUP” menu.

MULTI PIP SETUP

Press to select the menu to adjust.

Press to adjust the menu.

MULTI PIP

BLEND PIP

DISPLAY MODE

TRANSPARENCY

TRANSPARENCY LEVEL

INSERT

—

OFF

0 %

OFF

INSERT LEVEL

MULTI PIP

DISPLAY MODE

Set the two-screen function.

The display mode can be changed separately for each function that was set in “MULTI PIP SETUP”.

— (One screen)

P AND P

— (One screen)

P OUT P

P IN P

For “PIP”:

PIP

ADVANCED PIP

BLEND PIP

1 to 8

For “ADVANCED PIP”:

FULL

P IN P

For “BLEND PIP”:

Note: The display mode changes in the same way when

is pressed.

Transparent Display of the Sub Screen (During BLEND PIP)

Select “ON” in “TRANSPARENCY”.

Set the transparency level for the sub screen in “TRANSPARENCY LEVEL”. (0 to 100 %)

Setting example Transparent image (sub screen)

0 %: No transparency

100 %: Fully transparent

Note: “INSERT” cannot be set when “TRANSPARENCY” is “ON”.

Sub Screen Insertion (During BLEND PIP)

Select “ON” in “INSERT”.

Set the “INSERT LEVEL”. (1 to 10 %)

Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas on the sub screen.

Setting example Image to insert (sub screen)

INSERT LEVEL

10 %

Onlytheareasontheoverlay

image that are brighter than

the “INSERT LEVEL” are

displayedonthebackground

image.

Background image

(main screen)

Two-picture insertion

1 %

Note: “TRANSPARENCY” cannot be set when “INSERT” is “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for PORTRAIT

Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically. The image will be enlarged 3

times and rotated 90-degree.

(Example)

Note:

When using the PORTRAIT function with displays set vertically, “DISPLAY ORIENTATION” in SET UP menu has to be

set to “PORTRAIT” (see page 44).

How to setup PORTRAIT

Press to display the SET UP menu.

Press to select the PORTRAIT SETUP.

SET UP

2/2

MULTI DISPLAY SETUP

MULTI PIP SETUP

PORTRAIT SETUP

SET UP TIMER

PRESENT TIME SETUP

DISPLAY ORIENTATION

Press to display the “PORTRAIT SETUP” menu.

LANDSCAPE

Press to select the PORTRAIT SETUP.

Press to select “ON” or “OFF”.

PORTRAIT SETUP

SEAM HIDES VIDEO

VIEWING AREA

LOCATION

AI-SYNCHRONIZATION

OFF

16:9

Note:

If you set PORTRAIT SETUP to ON, MULTI

DISPLAY SETUP will be unavailable.

OFF

Press to select SEAM HIDES VIDEO.

Press to select “OFF” , “ON”.

PORTRAIT SETUP

SEAM HIDES VIDEO

VIEWING AREA

OFF

16:9

LOCATION

AI-SYNCHRONIZATION

OFF

To hide joints between displays.

To show joints between displays.

Suitable for moving image display.

Suitable for still image display.

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for PORTRAIT

VIEWING AREA / LOCATION

VIEWING AREA: Set a mode of image division for PORTRAIT function.

LOCATION: Set a location of image to be displayed for PORTRAIT function.

Press to select VIEWING AREA or LOCATION.

Press to select each function.

PORTRAIT SETUP

SEAM HIDES VIDEO

VIEWING AREA

LOCATION

AI-SYNCHRONIZATION

OFF

16:9

Notes:

• For HD signal videos, the “VIEWING AREA” is set at “16:9”,

and cannot be changed.

OFF

HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p

• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i

• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.

LOCATION setting

When PORTRAIT SETUP “ON”:

Display the image of the selected LOCATION.

When PORTRAIT SETUP is “OFF”:

Represent an area of the selected LOCATION at a normal

brightness and darken the rest of it.

VIEWING AREA and LOCATION

The mode of image division and the LOCATION by setting of VIEWING AREA is as follows.

VIEWING AREA: 16:9

Suitable to display FULL images. NORMAL

(4:3) images extend transversely.

Both right and left sides of the image are

cut by 48 dots.

LOCATION 1

Undisplayed area (48 dots)

LOCATION 2

LOCATION 3

VIEWING AREA: 4:3

4:3 images are displayed without changing

aspect ratio.

Although the images of each LOCATION

overlap, you can adjust POS. / SIZE to

display the image normally. (see page 25)

LOCATION 1

LOCATION 2

AI-SYNCHRONIZATION

Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting.

Press to select AI-SYNCHRONIZATION.

PORTRAIT SETUP

Press to select “OFF” , “ON”.

PORTRAIT SETUP

SEAM HIDES VIDEO

VIEWING AREA

OFF

16:9

The brightness depends on Equalize the brightness of

each display’s setting.

all the displays.

LOCATION

AI-SYNCHRONIZATION

OFF

Note:

If you setAI-SYNCHRONIZATION to ON, the

following menus will be unavailable and these

settings will be ﬁxed to the initial values.

PICTURE menu: COLOR,TINT,INPUTLEVEL

(ADVANCED SETTINGS)

OFF

Press to exit from adjust mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for Input Signals

COMPONENT / RGB IN SELECT

Select to match the signals from the source connected to the COMPONENT / RGB input terminals.

Y, P_B, P_Rsignals

RGB signals

“COMPONENT”

“RGB”

SET UP

SIGNAL

SCREENSAVER

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

1/2

Press to display the SET UP menu.

Press to select the “COMPONENT / RGB-IN SELECT”.

Press to select the desired mode.

RGB

OFF

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

COMPONENT

RGB

(

)

ENGLISH US

Press to exit from adjust mode.

Notes:

• Selection may not be possible, depending on which optional board is installed.

• Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).

YUV / RGB IN SELECT

Select to match the signals from the source connected to the DVI input terminals.

YUV signals

RGB signals

“YUV”

“RGB”

SET UP

1/2

Press to display the SET UP menu.

SIGNAL

SCREENSAVER

EXTENDED LIFE SETTINGS

YUV/RGB-IN SELECT

Press to select the “YUV / RGB-IN SELECT”.

Press to select the desired mode.

RGB

OFF

INPUT LABEL

POWER SAVE

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

YUV

RGB

(

)

OSD LANGUAGE

ENGLISH US

Press to exit from adjust mode.

Notes:

• Selection may not be possible, depending on which optional board is installed.

• Make setting of the selected input terminal (SLOT1 or SLOT2).

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for Input Signals

SIGNAL menu

Note:

“SIGNAL” setup menu displays a different setting condition for each input signal.

SET UP

SIGNAL

1/2

Press to display the SET UP menu.

SCREENSAVER

Press to select the “SIGNAL”.

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL

POWER SAVE

OFF

Press to display the SIGNAL menu.

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

(

)

ENGLISH US

Press to select the menu to adjust.

Press ACTION ( ) button

For RGB

Press to adjust the menu.

For VIDEO (S VIDEO)

[

]

[

]

RGB

SIGNAL

VIDEO

SIGNAL

3D Y/C FILTER (NTSC)

COLOR SYSTEM

3 : 2 PULLDOWN

SYNC

AUTO

OFF

4:3

100 Hz

OFF

AUTO

OFF

3 : 2 PULLDOWN

XGA MODE

REFRESH RATE

NOISE REDUCTION

AUTO

100 Hz

OFF

Panasonic AUTO (4 : 3)

REFRESH RATE

NOISE REDUCTION

Press to exit from adjust mode.

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

SIGNAL FORMAT 1280×1024/60

For COMPONENT

For Digital

[

]

[

]

Digital

SIGNAL

COMPONENT

SIGNAL

3 : 2 PULLDOWN

XGA MODE

REFRESH RATE

NOISE REDUCTION

3 : 2 PULLDOWN

REFRESH RATE

NOISE REDUCTION

OFF

100 Hz

OFF

AUTO

100 Hz

OFF

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

DOT CLOCK FREQ. 108.0 MHz

SIGNAL FORMAT 1280×1024/60

3D Y/C FILTER – For NTSC AV images

Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.

(“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “3D Y/C FILTER (NTSC)”.

Press to set ON / OFF.

3D Y/C FILTER (NTSC)

Note:

When ON, this setting only affects NTSC input signals.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.

(“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “COLOR SYSTEM” or

“Panasonic AUTO (4:3)”.

Press to select each function.

[

]

SIGNAL

VIDEO

3D Y/C FILTER (NTSC)

COLOR SYSTEM

3 : 2 PULLDOWN

AUTO

OFF

4:3

If the image becomes unstable:

Panasonic AUTO (4 : 3)

With the system set onAuto, under conditions of low level or noisy

input signals the image may in rare cases become unstable. Should

this occur, set the system to match the format of the input signal.

Mode

Function

COLOR SYSTEM Set the color system to match the input signal. When selecting “AUTO”, the color system is automatically

selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on

the attached terminal board. To display M.NTSC signal, select “M.NTSC” in COLOR SYSTEM.

To display PAL60 signal, select “PAL” when BNC Dual Video Terminal Board (TY-FB9BD) is

used. For other Video Terminal Boards, select “M.NTSC”.

AUTO

PAL

SECAM

M.NTSC

NTSC

Panasonic AUTO Set to “4:3” to view 4:3 images in an unchanged format when Panasonic AUTO is selected.

(4 : 3 ) If you would like to view 4:3 images in Just format, set to “JUST”.

Note:

Panasonic AUTO does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie

pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to OFF.

Note:

When ON, this setting only affects the following signal input:

• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.

• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.

Press to select “3:2 PULLDOWN”.

3 : 2 PULLDOWN

OFF

Press to set ON/OFF.

XGA MODE

This menu is displayed when the input signal is analog (Component/PC).

This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling

rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).

Press to select “XGA MODE”.

XGA MODE

AUTO

Press to select “AUTO”, “1024×768”, “1280×768”, “1366×768”.

AUTO: Automatically selected from 1024×768/1280×768/1366×768.

Switch the setting to suit the input signal for better display depends on the angle of view

or display resolution condition.

Note:

After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as

necessary. (see page 25)

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for Input Signals

REFRESH RATE

This function sets the refresh rate of the display.

This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.

100 Hz: Reduce screen ﬂicker.

50 Hz: Enhance the resolution of moving images.

Note:

It is recommended to set to 100 Hz normally.

Press to select REFRESH RATE.

REFRESH RATE

100 Hz

Press to adjust.

NOISE REDUCTION

Sets the following three NR (Noise Reduction) functions together.

VIDEO NR, MOSQUITO NR, BLOCK NR

Press to select “NOISE REDUCTION”.

NOISE REDUCTION

OFF

Press to select “OFF”, “MIN”, “MID”, “MAX”,

“ADVANCED”.

Advanced NR

Sets the three NR functions separately.

NOISE REDUCTION

ADVANCED

Press to select “ADVANCED”.

▼

[

]

[

]

RGB

ADVANCED NR

VIDEO

ADVANCED NR

Press to enter ADVANCED NR.

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

Press to select VIDEO NR,

MOSQUITO NR or BLOCK NR.

Press to select “OFF”, “MIN”, “MID”,

“MAX”.

[

]

[

]

Digital

ADVANCED NR

COMPONENT

ADVANCED NR

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

VIDEO NR

MOSQUITO NR

BLOCK NR

OFF

VIDEO NR:

Automatically reduces unwanted picture noise.

MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.

BLOCK NR:

Reduces block noise when playing MPEG videos.

Note:

NOISE REDUCTION cannot be adjusted while a PC signal is being applied.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET UP for Input Signals

SYNC

Select SIGNAL from the “SET UP” menu during RGB input signal.

Press to select the “SYNC”.

[

]

SIGNAL

RGB

Press to adjust.

SYNC

AUTO

OFF

3 : 2 PULLDOWN

XGA MODE

AUTO

Setting RGB sync signal

Conﬁrm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal).

SYNC

AUTO

ON G

VBS

AUTO:

ON G:

VBS:

The H and V sync or synchronized signal are automatically selected.

If both input, it is selected the H and V sync.

Uses a synchronized signal on the Video G signal, which is input from

the G connector.

Uses a synchronized signal of Composite Sync input, which is input

from the HD connector.

SDI THROUGH

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).

Note:

Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)

is selected.

Press to select the “SDI THROUGH”.

Press to select “ON” or “OFF”.

[

]

SIGNAL

Digital

3 : 2 PULLDOWN

SDI THROUGH

OFF

REFRESH RATE

NOISE REDUCTION

100 Hz

OFF

ON: Enables active through.

OFF: Disables active through.

Input signal display

Displays the frequency and the type of the current input signal.

This display is valid only for COMPONENT/RGB/PC and Digital input signal.

Display range:

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

Horizontal 15 - 110 kHz

Vertical

SIGNAL FORMAT 1280×1024/60

48 - 120 Hz

H-FREQ. 63.98 kHz

V-FREQ. 60.02 Hz

The dot clock frequency is displayed during digital signal input.

DOT CLOCK FREQ. 108.0 MHz

SIGNAL FORMAT 1280×1024/60

Download from Www.Somanuals.com. All Manuals Search And Download.

Options Adjustments

Options

1/3

Press to display the SET UP menu.

Press to select “OSD LANGUAGE”.

Weekly Command Timer

Memory lock

Onscreen display

Initial INPUT

Initial VOL level

Maximum VOL level

INPUT lock

Off

Button lock

Press for more than 3 seconds.

Press to select “Options”.

Remocon User level

Options

2/3

Options

Shipping

Off-timer function

Initial Power Mode

ID select

Enable

Normal

Remote ID

Off

Press to display the Options menu.

Press to select your preferred menu.

Serial ID

Off

Display size

Studio W/B

Off

Studio Gain

Off

Options

3/3

Press to adjust the menu.

Slot power

Off

Power On Screen Delay

Clock Display

All Aspect

Auto Setup

Manual

Rotate

Serial Slot Select

Off

Slot2

Press to exit from Options menu.

Item

Adjustments

Weekly Command Timer Sets Weekly Command Timer. (see page 58)

Memory lock

Locks or unlocks saved proﬁles. Also for setting passwords. (see page 33)

On: Displays all the following on screen.

• Power on display

• Input signal switch display

• No signal display

Onscreen display

• Mute and the remaining time of off-timer after was pressed.

Off: Hides all the items above from view.

Off

INPUT1

INPUT2

INPUT3

Adjusts the input signal when the unit is turned on.

Notes:

• Only the adjusted signal is displayed. (see page 15)

• Signal can be displayed when the Terminal board is installed.

• This menu is available only when “INPUT lock” is “Off”.

Initial INPUT

• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.

(Ex. INPUT1A, INPUT1B)

Press

button to adjust the volume when the unit is turned on.

Off

Off: Sets normal volume.

On: Sets your preferred volume.

Notes:

Initial VOL level

•

When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

• You can hear the changed volume regardless of your volume setting before opening the options menu if

you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press

button to adjust the maximum volume.

Off

Off: Sets auto maximum volume.

On: Sets your preferred maximum volume.

Notes:

Maximum VOL level

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically

becomes the same as the “Maximum VOL level”.

• The volume display can go up to 63 regardless of the settings.

• You can hear the changed volume regardless of your volume setting before opening the options menu if

you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Options Adjustments

Item

Adjustments

Off

INPUT1

INPUT2

INPUT3

Locks the input switch operation.

Notes:

• Only the adjusted signal is displayed (see page 15).

• Signal can be displayed when the Terminal board is installed.

• Input switch can be used when this is set to “Off”.

INPUT lock

• In two screen display mode, if anything other than “Off” is set, the value will be ﬁxed as the value input in

the single screen display mode.

• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.

(Ex. INPUT1A, INPUT1B)

Off

MENU&ENTER

Off: All the buttons at the right side of the main unit can be used.

MENU&ENTER:

ENTER/

Locks

and

buttons on right side of main unit.

On: Locks all the button on right side of main unit.

Sets Button lock with the unit buttons in the following procedure.

Button lock

INPUT

ENTER/

Off: Press

four times→Press

INPUT

ENTER/

MENU&ENTER: Press

four times→Press

ENTER/

On: Press

four times→Press

Off User1

User2

User3

Off: You can use all of the buttons on the remote control.

User1:You can only use

buttons on the remote control.

Remocon User level

Off-timer function

Initial Power Mode

ID select

User2:You can only use

User3:Locks all the buttons on remote control.

, buttons on the remote control.

Enable: Enables the “Off-timer function”.

Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

Normal

Standby

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Normal: Power returns in as the same state as before the power interruption.

Standby: Power returns in standby mode. (Power Indicator : red/orange)

On:

Power returns in power On. (Power Indicator : green)

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

(Standard value: 0)

The setting of this menu is valid only when using ID remote control.

Off: Disables ID remote control functions. You can use normal remote control operations.

On: Enable ID remote control functions.

Note: To use the ID remote control function, it is necessary to set each ID number of remote control and

display unit. About the setting method, please refer to “ID Remote Control Function” (see page 46)

and “ID select” (above-mentioned).

Remote ID

Sets the panel ID Control.

Off: Disables external control by the ID.

On: Enables the external control by the ID.

Serial ID

Adjusts the image display size on screen.

Off: Sets the normal image display size on screen.

On: Sets the image display size approximately 95 % of the normal image display.

Off

Notes:

Display size

• This setting is valid only when the input signals are as follows;

NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (BNC Dual Video Terminal Board (TY-FB9BD))

525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p,

1125/60p, 1125/50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

• This setting is invalid when two screen display, digital zoom, Multi display or Portrait display is selected.

• When “Display size” is set to “On”, “H-POS” and “V-POS” in “POS. /SIZE” can be adjusted.

• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Options Adjustments

Item

Adjustments

Off: Nullify all the settings adjusted.

On: Sets the color temperature for TV studio.

Studio W/B

Note: Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu.

Sharpens the contrast for a better view when a part of the image is too light to see.

Off: Disables “Studio Gain”.

On: Enables “Studio Gain”.

Note: This setting is valid only when the input signals are as follows:

Component Video, RGB (analog), SDI, HDMI

Studio Gain

Slot Power

Off

Auto

Off: Power is not transmitted to the slot power.

Auto: Power is transmitted to the slot power only when main power is on.

On: Power is transmitted to the slot power when main power is on or in the standby state.

Note: In some cases, power is transmitted to the slot power when main power is on or in the standby state

regardless of the slot power setting.

Off

3....

You can set the power-on delay time of the displays to reduce the power load, when you press

on the multiple displays that are set together, for example, on MULTI DISPLAY system.

Set each display’s setting individually.

to turn

Off:

1 to 30 (sec.): Set the power-on delay time (second).

After pressing , the display will be powered on with time delay depending on this setting.

The display will be turned on at the same time as

is pressed.

Power On Screen

Delay

Notes:

• During this function is working, the power indicator is blinking green.

•

This function also works when the power recovers from failure or after plugging off and in again the power cord.

After you unplug and plug the power cord in while the unit is in standby mode and also the power is being

supplied to a terminal board, the unit will start supplying the power to the board with time delay according

to the setting.

The power indicator lights up red ﬁrst and it turns orange when the power starts being supplied to the board.

Off: Not display the clock.

On: Display the clock.

The clock is displayed at the lower left of the screen when button is pressed.

Clock Display

Note: When “PRESENT TIME SETUP” is not set, the clock is not displayed even

if “Clock Display” is “On” (see page 36)

10:00

Sets All Aspect mode (advanced aspect setting) or default aspect mode.

With each press of button, the aspect changes in the selected mode.

Off: Default aspect mode

On: All Aspect mode

Aspect mode of each setting is as follows:

(Example: HD signal)

All Aspect

Off

4:3→H-FILL→ZOOM→FULL→JUST

4:3 (1)→4:3 (2)→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just1→Just2

Sets the operational mode of the automatic position adjustment in the POS./SIZE menu.

Manual: Automatic position adjustment starts when

is pressed on the remote control or automatic position

adjustment is executed from the POS./SIZE menu.

Other than remote control or menu operation, automatic position adjustment starts:

When the display power is turned ON.

Auto Setup

Rotate

Auto:

When the input signal is switched.

Off: Does not rotate the image.

On: Rotates the image 180 degrees.

Slot1

Slot2

Slot3

Serial Slot

Select

Selects the slot which communicates serial.

Note: The setting of an external command can be set only from the ﬁxed serial terminal. (see page 11)

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote

ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the

button on main unit together with

button on the remote control and hold for more than 5 seconds. The

“Shipping” menu is displayed and the lock is released when it disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Options Adjustments

Weekly Command Timer

You can set 7-day timer programming by setting time and command.

Note:

Before setting Weekly Command Timer, set PRESENT TIME SETUP. (see page 36)

Press to select Function.

Options

1/3

Weekly Command Timer

Memory lock

Press to select “On”.

Onscreen display

Note:

Press ACTION ( ) button

• When Function is set to On, SET UP TIMER

(see page 36) is unavailable and INTERVAL

/ TIME OF DAY in MODE of SCREENSAVER

(see page 37) cannot be selected.

Weekly Command Timer

Function

Program1

Program3

---

Monday

Tuesday

Wednesday

Thursday

Friday

Press to select a day.

Program3

---

Press to select a program number.

Program6

Program4

Saturday

Sunday

Note:

Program Edit

• You can set the program from 1 to 7.

--- indicates unset.

Program number

Program3

---

Thursday

Friday

Press to select Program Edit.

Program6

Program4

Saturday

Sunday

Program Edit

Press to show the Program Edit screen.

Press to select Program.

Program Edit screen

1/8

Weekly Command Timer

Program

Press to change the program numbers (1-7).

8:00 PON

10:30 IMS:SL1

--:-- ---

Press to select a command number.

12:00 DAM:ZOOM

9:12 AVL:10

--:-- ---

Press to show the previous / next command

pages (1-8) of the selected program.

Press to show the command setting screen.

1/8

8/8

Weekly Command Timer

Program

Weekly Command Timer

Program

AVL:00

8:00 PON

20:00

20:30

DAM:NORM

10:30 IMS:SL1

--:-- ---

22:00 POF

--:-- ---

12:00 DAM:ZOOM

9:12 AVL:10

--:-- ---

Command (--- indicates unset)

Set time of timer (--:-- indicates unset)

Command numbers

Download from Www.Somanuals.com. All Manuals Search And Download.

Options Adjustments

Press to select Command No.

Command setting screen

Weekly Command Timer

Press to select a command number.

Program

Command No

Time

10:30

IMS:SL1

Command

Press to select Time / Command.

Weekly Command Timer

Program

Press to set each item.

10:30

IMS:SL1

Command No

Time

Command

Time: Set the time to execute a command program.

Pressing “ ” or “ ” button once changes “Time” 1

minute.

Pressing “ ” or “ ” button continuously changes “Time” by 15 minutes.

Command: Select a command to execute at the set time. This unit has 64 commands to set.

(see page 64)

Notes:

•

Command is performed in order of execution time, regardless of the command number.

• If a command execution time overlaps with that of other commands, these commands are

performed in number order.

• Pressing , Time becomes --:-- and Command becomes ---.

Note:

Press

to return to the previous screen.

Shipping condition

This function allows you to reset the unit to the factory setting.

SET UP

SIGNAL

SCREENSAVER

EXTENDED LIFE SETTINGS

COMPONENT/RGB-IN SELECT

1/2

Press to display the SET UP menu.

Press to select “OSD LANGUAGE”.

RGB

INPUT LABEL

OFF

POWER SAVE

Press for more than 3 seconds.

STANDBY SAVE

POWER MANAGEMENT

AUTO POWER OFF

OSD LANGUAGE

Press to select “Shipping”.

(

)

ENGLISH US

Options

Shipping

Press to display the Shipping menu.

Press to select “YES”.

Shipping

YES

Press to conﬁrm.

[from the unit]

1 Press the MENU button till the SET UP menu is displayed.

2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.

3 Press and hold the ENTER button till the Shipping menu is displayed.

4 Press the Volume Up “+” or Down “–” button to select “YES”.

5 Press the ENTER button and wait for 10 sec.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Symptoms

Checks

Picture

Sound

Electrical Appliances

Cars / Motorcycles

Fluorescent light

Interference

Noisy Sound

Volume

Normal Picture

No Picture

No Sound

(Check whether the mute function has been activated on the remote control.)

Not plugged into AC outlet

Not switched on

PICTURE and BRIGHTNESS/Volume setting

(Check by pressing the power switch or stand-by button on the remote control.)

If a signal with a non-applicable color system format, or frequency is input, only the input

terminal indication is displayed.

No Picture

No Color

Normal Sound

Color controls set at minimum level. (see page 28, 29)

COLOR SYSTEM (see page 52)

No remote control operations can be performed.

Check whether the batteries have discharged completely and, if they have not, whether they

were inserted properly.

Check whether the remote control sensor is exposed to an outdoor light or a strong ﬂuorescent

light.

Check whether the remote control designed speciﬁcally for use with the unit is being used.

(The unit cannot be operated by any other remote control.)

A cracking sound is sometimes heard from the unit. If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing

very slight contractions in response to changes in the room temperature. There are no adverse

effects on the performance or other aspects.

The top or bottom of the picture on the screen is cut Adjust the position of the picture on the screen.

off when I use the zoom function.

Areas at the top and bottom of the screen where When using a video software program (such as a cinema size program) with a screen wider

the image is missing appear when I use the zoom than one in the 16:9 mode, blank areas separate from the images are formed at the top and

function.

bottom of the screen.

I can hear sounds coming from inside the unit.

When the power is turned on, a sound of the display panel being driven may be heard: This is

normal and not indicative of malfunctioning.

This Plasma Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input

signal. However, this is not a malfunction.

Plasma Display panel

Symptoms

Check

The screen darkens slightly when bright pictures with The screen will darken slightly when photos, still images of a computer or other pictures with

minimal movements are shown.

minimal movements are shown for an extended period. This is done to reduce image retention

on the screen and the shortening of the screen’s service life: It is normal and not indicative of

malfunctioning.

It takes a while for the picture to appear.

The unit digitally processes the various signals in order to reproduce esthetically pleasing

images. As such, it sometimes takes a few moments for the picture to appear when the power

has been turned on, when the input has been switched or when the images for the main picture

and sub picture on the two screens are swapped.

The edges of the images ﬂicker.

Due to the characteristics of the system used to drive the panel, the edges may appear to ﬂicker

in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.

The brightness on both sides of images in 4:3 mode When viewing the side panels at the “BRIGHT” or “MID” setting, the brightness on both sides

changes.

may change depending on the kind of program shown: This is normal and not indicative of

malfunctioning.

Some parts of the screen do not light up.

The plasma display panel is manufactured using an extremely high level of precision technology,

however, sometimes some parts of the screen may be missing picture elements or have luminous

spots. This is not a malfunction.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent

image retention to remain on the Plasma Display.

Examples of still pictures include logos, video games, computer images, teletext and images

displayed in 4:3 mode.

Note:

The permanent image retention on the Plasma Display resulting from ﬁxed image use is not

an operating defect and as such is not covered by the Warranty.

This product is not designed to display ﬁxed images for extended periods of time.

Image retention appears

Whirring sounds can be heard from the display unit. The display unit is ﬁtted with a cooling fan to dissipate heat generated during normal use. The

whirring sound is caused by rotation of the fan and is not a malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

List of Aspect Modes

Aspect mode

Description

All Aspect: Factory setting

Picture

Enlarged screen

All Aspect: Off

The display of the pictures ﬁlls the screen.

In the case of SD signals, pictures with a 4:3 aspect ratio are

enlarged horizontally, and displayed. This mode is suited to

displaying anamorphic pictures with a 16:9 aspect ratio.

16:9

FULL

Letterbox pictures with a 14:9 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the

screen vertically and is slightly smaller than the screen

horizontally. The top and bottom edges of the pictures are

cut off. Side panels are displayed at the left and right edges

of the screen.

14:9

–

Pictures with a 4:3 aspect ratio are enlarged horizontally

so that the picture distortion is minimized. The display of

the areas around the left and right edges of the screen is

slightly elongated.

Just

JUST

4:3

Just1

Pictures with a 4:3 aspect ratio are enlarged horizontally

so that the picture distortion is minimized. The left and right

edges of the pictures are cut off. The display of the areas

around the left and right edges of the screen is slightly

elongated.

Just2

Pictures with a 4:3 aspect ratio are displayed with their

original aspect ratio. Side panels are displayed at the left

and right edges of the screen.

4:3

4:3 (1)

Pictures with a 4:3 aspect ratio are displayed with their

original aspect ratio. The left and right edges of the pictures

are masked by side panels.

4:3 (2)

4:3

Pictures with a 4:3 aspect ratio are enlarged horizontally so

that their display ﬁlls the screen. The left and right edges of

the pictures are cut off.

4:3 Full

H-FILL

ZOOM

Letterbox pictures with a 16:9 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the screen.

The top and bottom edges of the pictures are cut off.

Zoom

Zoom1

Letterbox pictures with a 16:9 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the screen.

The top and bottom edges as well as the left and right edges

of the pictures are cut off.

Zoom2

Zoom3

ZOOM

Letterbox pictures with a 2.35:1 aspect ratio are enlarged

vertically and horizontally so that their display ﬁlls the screen

vertically and is slightly larger than the screen horizontally.

The top and bottom edges as well as the left and right edges

of the pictures are cut off.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Applicable Input Signals

*Mark: Applicable input signal

COMPONENT / RGB IN

Horizontal frequency Vertical frequency

Signal name

DVI-D IN 8

(Dot clock (MHz))

∗

/ PC IN

(kHz)

(Hz)

(Dot clock (MHz))

525 (480) / 60i

525 (480) / 60p

625 (575) / 50i

625 (575) / 50p

625 (576) / 50p

15.73

31.47

15.63

31.25

45.00

37.50

67.50

33.75

56.26

28.13

27.00

33.75

28.13

27.00

31.25

27.00

31.46

31.47

37.86

37.50

43.27

35.16

37.88

48.08

46.88

53.67

31.47

39.55

48.36

56.48

60.02

68.68

37.64

53.70

67.50

47.70

60.00

85.94

63.98

79.98

91.15

39.55

48.36

65.22

75.00

81.25

67.50

74.04

35.00

49.72

68.68

59.94

50.00

60.00

50.00

60.00

50.00

48.00

30.00

25.00

24.00

50.00

48.00

24.00

70.07

59.94

72.81

75.00

85.01

56.25

60.32

72.19

75.00

85.06

59.94

50.00

60.00

70.07

75.03

85.00

59.94

60.00

75.00

60.00

85.00

60.02

75.03

85.02

50.00

60.00

65.00

60.00

59.95

66.67

74.54

75.06

* (13.5)

* (27.0)

* (13.5)

* (27.0)

∗

* (27.0)

750 (720) / 60p

750 (720) / 50p

* (74.25)

* (148.5)

* (74.25)

* (148.5)

* (74.25)

* (148.5)

* (74.25)

* (148.5)

* (74.25)

1,125 (1,080) / 60p

1,125 (1,080) / 60i

1,125 (1,080) / 50p

1,125 (1,080) / 50i

1,125 (1,080) / 24sF

1,125 (1,080) / 30p

1,125 (1,080) / 25p

1,125 (1,080) / 24p

1,250 (1,080) / 50i

2,048 × 1,080 / 24sF

2,048 × 1,080 / 24p

640 × 400 @70 Hz

640 × 480 @60 Hz

640 × 480 @72 Hz

640 × 480 @75 Hz

640 × 480 @85 Hz

800 × 600 @56 Hz

800 × 600 @60 Hz

800 × 600 @72 Hz

800 × 600 @75 Hz

800 × 600 @85 Hz

852 × 480 @60 Hz

1,024 × 768 @50 Hz

1,024 × 768 @60 Hz

1,024 × 768 @70 Hz

1,024 × 768 @75 Hz

1,024 × 768 @85 Hz

1,066 × 600 @60 Hz

1,152 × 864 @60 Hz

1,152 × 864 @75 Hz

1,280 × 768 @60 Hz

1,280 × 960 @60 Hz

1,280 × 960 @85 Hz

∗

* (74.25)

∗

* (74.25)

∗

* (25.17)

* (25.18)

* (40.0)

∗

* (31.5)

* (36.0)

* (40.0)

* (50.0)

* (49.5)

* (56.25)

* (33.54)

* (34.24)

* (51.89)

* (65.0)

∗

* (65.0)

* (75.0)

* (78.75)

* (94.5)

* (53.0)

* (81.62)

* (108.0)

* (80.14)

* (108.0)

* (148.5)

* (108.0)

* (135.0)

* (157.5)

1,280 × 1,024 @60 Hz

1,280 × 1,024 @75 Hz

1,280 × 1,024 @85 Hz

1,366 × 768 @50 Hz

1,366 × 768 @60 Hz

1,400 × 1,050 @60 Hz

1,600 × 1,200 @60 Hz

1,600 × 1,200 @65 Hz

1,920 × 1,080 @60 Hz

1,920 × 1,200 @60 Hz

* (108.0)

* (69.92)

* (87.44)

* (122.61)

* (162.0)

* (86.71)

* (162.0)

* (175.5)

* (148.5)

* (154.0)

∗

51 Macintosh13” (640 × 480)

52 Macintosh16” (832 × 624)

53 Macintosh21” (1,152 × 870)

* (30.24)

* (57.28)

* (100.0)

1: Based on SMPTE 274M standard.

3: Based on SMPTE 295M standard.

5: When selected the RGB format and 525p signal input to the Mini D-sub 15P terminal, it is recognized as VGA 60Hz signal.

6: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.

7: Based on SMPTE 292M and 372M standards. These signals can be received when the Dual Link HD-SDI Terminal Board

(TY-FB11DHD) is installed.

2: Based on SMPTE RP211 standard.

4: The input signal is recognized as 1,125 (1,080) / 60p.

∗

8: These signals can be received when the DVI-D Terminal Board (TY-FB11DD) is installed.

Note: Signals without above speciﬁcation may not be displayed properly.

∗

Download from Www.Somanuals.com. All Manuals Search And Download.

Applicable Input Signals

VIDEO input (HDMI)

Vertical

Horizontal

Dot clock

(MHz)

Number of Total number Number of Total number

Signal format

frequency (Hz) frequency (kHz)

active pixels

of pixels

active lines

of lines

VGA60

59.94

50.00

60.00

50.00

60.00

50.00

60.00

50.00

24.00

31.47

31.25

45.00

37.50

33.75

28.13

67.50

56.26

27.00

25.18

27.00

74.25

148.50

74.25

640

800

480

525

525/60p

625/50p

750/60p

750/50p

1125/60i

1125/50i

1125/60p

1125/50p

720

858

480

525

720

864

576

625

1280

1920

1650

1980

2200

2640

2200

2640

2750

720

750

720

750

1080

1125

∗

10 1125/24p

Not compatible with HDMI Terminal Board (TY-FB8HM).

Audio signal Linear PCM : 48/44.1/32 kHz

∗

Download from Www.Somanuals.com. All Manuals Search And Download.

Command list of Weekly Command Timer

No.

Command

AAC:MENCLR

AAC:MENDYN

Control details

∗

Audio Menu (Clear)

Audio Menu (Dynamic)

Audio Menu (Standard)

Surround (ON)

Surround (OFF)

Audio Mute (OFF)

Audio Mute (ON)

∗

AAC:MENSTD

AAC:SURMON

AAC:SUROFF

AMT:0

AMT:1

ASO:M

ASO:S

AVL:00

Audio out when PIP mode (Main Picture)

Audio out when PIP mode (Sub Picture)

Audio Volume (00)

AVL:10

AVL:20

AVL:30

AVL:40

AVL:50

AVL:60

Audio Volume (10)

Audio Volume (20)

Audio Volume (30)

Audio Volume (40)

Audio Volume (50)

Audio Volume (60)

Aspect (FULL)

Aspect (JUST)

Aspect (4:3)

Aspect (Panasonic Auto)

Aspect (ZOOM)

Dual Picture mode (OFF)

Advanced PIP mode (1) (see page 19)

Advanced PIP mode (2) (see page 19)

Advanced PIP mode (3) (see page 19)

Advanced PIP mode (4) (see page 19)

Advanced PIP mode (5) (see page 19)

Advanced PIP mode (6) (see page 19)

Advanced PIP mode (OFF) (normal two screen display mode)

Advanced PIP mode (ON)

The location of the sub picture (lower right)

The location of the sub picture (lower left)

The location of the sub picture (upper left)

The location of the sub picture (upper right)

Dual Picture mode (Picture in Picture)

Dual Picture mode (Picture out Picture)

Swap main picture and sub picture when PIP mode

Dual Picture mode (Picture and Picture)

Input select (PC1) (Main Picture when PIP mode)

Input select (SLOT1) (Main Picture when PIP mode)

Input select (SLOT1A) (Main Picture when PIP mode)

Input select (SLOT1B) (Main Picture when PIP mode)

Input select (SLOT2) (Main Picture when PIP mode)

Input select (SLOT2A) (Main Picture when PIP mode)

Input select (SLOT2B) (Main Picture when PIP mode)

Input select (SLOT3) (Main Picture when PIP mode)

Sub Picture Input Select (PC1)

DAM:FULL

DAM:JUST

DAM:NORM

DAM:SELF

DAM:ZOOM

DWA:OFF

DWA:OVL1

DWA:OVL2

DWA:OVL3

DWA:OVL4

DWA:OVL5

DWA:OVL6

DWA:OVLOF

DWA:OVLON

DWA:PIN0

DWA:PIN1

DWA:PIN2

DWA:PIN3

DWA:PIP

DWA:POP

DWA:SWP

DWA:TWN

IMS:PC1

IMS:SL1

IMS:SL1A

IMS:SL1B

IMS:SL2

IMS:SL2A

IMS:SL2B

IMS:SL3

ISS:PC1

ISS:SL1

Sub Picture Input Select (SLOT1)

Sub Picture Input Select (SLOT1A)

Sub Picture Input Select (SLOT1B)

Sub Picture Input Select (SLOT2)

Sub Picture Input Select (SLOT2A)

Sub Picture Input Select (SLOT2B)

Sub Picture Input Select (SLOT3)

Screen Saver SCROLLING BAR ONLY (OFF)

Screen Saver SCROLLING BAR ONLY (ON)

ISS:SL1A

ISS:SL1B

ISS:SL2

ISS:SL2A

ISS:SL2B

ISS:SL3

OSP:SCR0

OSP:SCR1

POF

PON

Power OFF

Power ON

SSC:FNC0

SSC:FNC1

SSC:MOD0

Screen Saver function (SCROLLING BAR ONLY)

Screen Saver function (NEGATIVE IMAGE)

Screen Saver (Mode (OFF))

Screen Saver (Mode (ON))

Picture Mute (OFF)

Picture Mute (ON)

SSC:MOD3

∗

VMT:0

VMT:1

1 These commands are unavailable on this model.

2 Picture Mute cannot be unlocked by powering off/on with the remote control. Turn off and on again with the button

on the unit or enter the command VMT:0 to unlock Picture Mute.

∗

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

TH-103PF12U

200-240 V AC, 50/60 Hz

Power Source

Power Consumption

Power on

1,400 W

Save OFF 1.2 W, Save ON 0.7 W

Stand-by condition

Power off condition

Plasma Display panel

Screen size

0.4 W

Drive method : AC type 103-inch, 16:9 aspect ratio

89.3” (2,269 mm) (W) × 50.2” (1,276 mm) (H) × 102.4” (2,603 mm) (diagonal)

2,073,600 (1,920 (W) × 1,080 (H))

(No.of pixels)

[5,760 × 1,080 dots]

Operating condition

Temperature

32 °F - 104 °F (0 °C - 40 °C)

20 % - 80 %

Humidity

Applicable signals

525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p

· 24p · 25p · 30p · 24sF, 1250 (1080) / 50i

Scanning format

VGA, SVGA, XGA, SXGA

PC signals

UXGA ···· (compressed)

Horizontal scanning frequency 15 - 110 kHz

Vertical scanning frequency 48 - 120 Hz

Connection terminals

HDMI A-B

TYPE A Connector × 2

Y/G (BNC)

with sync 1.0 Vp-p (75 Ω)

0.7 Vp-p (75 Ω)

0.5 Vrms

Y or G with sync 1.0 Vp-p (75 Ω)

Y or G without sync 0.7 Vp-p (75 Ω)

COMPONENT/RGB IN

P^B/B (BNC), PR/R (BNC)

AUDIO IN (RCA PIN JACK × 2)

(HIGH-DENSITY MINI D-SUB 15PIN)

PC IN

B/P^B/CB : 0.7 Vp-p (75 Ω)

R/P^R/CR : 0.7 Vp-p (75 Ω)

HD/VD: 1.0 - 5.0 Vp-p (high impedance)

0.5 Vrms

AUDIO IN (M3 JACK)

EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)

RCA PIN JACK × 2 (L / R)

RS-232C COMPATIBLE

SERIAL

AUDIO OUT

OUTPUT LEVEL : VARIABLE (-∞ ― 0 dB)

[INPUT 1 kHz / 0 dB, 10 kΩ Load]

Accessories Supplied

Remote Control Transmitter

Batteries

EUR7636070R

AA Size × 2

TMME203 × 2

Fixing band

95.0” (2,412 mm) × 55.9” (1,419 mm) × 5.1” (129 mm)

(5.6” (141 mm) when including protruding portion of slots)

Dimensions (W × H × D)

Mass (weight)

Note:

apporox. 443.2 lbs

Design and speciﬁcations are subject to change without notice. Mass and dimensions shown are approximate.

Download from Www.Somanuals.com. All Manuals Search And Download.

(for the U.S.A and Puerto Rico)

Panasonic Professional Display Company

Unit of Panasonic Corporation of

North America

One Panasonic Way 1F-10

Secaucus, NJ 07094

Panasonic Professional Flat Panel Display

Limited Warranty

Panasonic Professional Display Company. (referred to

antenna, inadequate signal pickup, maladjustment of

consumer controls, improper operation, power line surge,

improper voltage supply, lighting damage, or service by

anyone other than an authorized repair facility, or

damage that is attributable to acts of God.

as “the Warrantor”) will repair this product and all

included accessories with new or refurbished parts,

free of charge in the USA or Puerto Rico, of the

original purchase in the event of a defect in materials or

workmanship as follows:

LIMITS AND EXCLUSIONS

Part

Warranty

Labor

Warranty

Models or Parts

There are no express warranties except as listed above.

Professional Flat

Panel Display

3 Years

THE WARRANTOR SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

(INCLUDING, WITHOUT LIMITION, DAMAGE

TO DISCS) RESULTING FROM THE USE OF THIS

PRODUCT, OR ARISING OUT OF ANY BREACH OF

THE WARRANTY. ALL EXPRESS AND IMPLIED

WARRANTIES, INCLUDING THE WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

PARTICULAR PURPOSE, ARE LIMITED TO THE

APPLICABLE WARRANTY PERIOD SET FORTH

ABOVE.

On-site or carry-in service in the USA and Puerto Rico

may be obtained during the warranty period by contacting

Panasonic Professional Display Company Service toll free

at 1-800-973-4390.

This warranty is extended only to the original purchaser

and is non transferable. A purchase receipt or other

proof of date of original purchase will be required before

warranty service is rendered.

Some states do not allow the exclusion or limitation

of incidental or consequential damages, or limitations

on how long an implied warranty lasts, so the above

exclusions or limitations may nor apply to you. This

warranty gives you specific legal rights and you may

other rights, which vary from state to state.

This warranty only covers failures due to defects in

materials or workmanship, which occur during normal

use. The warranty does not cover damage which occur

in shipment, or failures which are caused by products

not supplied by the warrantor, or failures which result

from improper installation, set-up adjustments, improper

If you have a problem with this product that is not

handled to your satisfaction, then write the Consumer

Affairs Department at the Company address indicated

above.

In the USA and Puerto Rico

FOR SERVICE

CALL TOLL FREE

1-800-973-4390

Download from Www.Somanuals.com. All Manuals Search And Download.

(for Canada)

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

LIMITED WARRANTY STATEMENT

Panasonic Canada Inc. (also known as PCI) warrants this product to be free of

defects in material and workmanship under normal use during the applicable

warranty coverage period described below. PCI agrees to repair, or at its option,

exchange, any part that becomes defective. However, the product must be

purchased and serviced in Canada. The product or part that shows evidence of

defect must be delivered prepaid or carried in to an authorized Panasonic Broadcast

Service Center. This warranty does not cover shipping costs.

WARRANTY COVERAGE PERIOD EXCEPTIONS

Item

Parts

Labour

Video Tape

30 days—Replacement only

(content not covered)

N/A

P2/SD Cards

Video Heads

(Content not covered)

N/A

1 year or 2,000 hrs. (prorated)

Whichever comes first

1 year or 2,000 hrs.

Whichever comes first

The warranty coverage period is one year for both parts and labour beginning with

the date of original end user purchase, subject to the exceptions as stated below.

Repaired or replacement parts supplied during the warranty coverage period carry

the unexpired portion of the original warranty coverage period. Proof of product

purchase is a condition of warranty service. The owner must produce the product

purchase receipt or other satisfactory evidence of date of original purchase.

D5 Video heads

1 year or 1,000 hrs.

Whichever comes first

1 year or 1,000 hrs.

Whichever comes first

Maintenance Items

90 days

2 years

90 days

1 year

Colour Camera CCD

Imaging Block

BT-H Series LCD Monitors 2 years

1 year

This warranty does not apply to external appearance items, such as handles, knobs,

safety windows, etc. This warranty does not apply to any part, or parts, of the

product, installed, altered, repaired or misused in any way that, in the opinion of PCI,

affects the reliability of or detracts from the performance of the product.

* DLP™ Projectors

3 years or 17,000 hrs.

Whichever comes first

3 years or 17,000 hrs.

Whichever comes first

* LCD Projectors above

2,500 ANSI Lumens

3 years or 2,500 hrs.

Whichever comes first

3 years or 2,500 hrs.

Whichever comes first.

For products requiring routine preventive maintenance, that maintenance must be

performed in order to maintain warranty coverage.

* LCD Projectors below

2,500 ANSI Lumens

3 years or 1,500 hrs.

Whichever comes first

3 years or 1,500 hrs.

Whichever comes first

Serial numbers that have been altered, defaced or removed void this warranty. This

warranty does not cover replacements or repairs necessitated by loss or damage

resulting from any cause beyond the control of PCI.

Projector Lamps

50% of the rated lamp life or 1 year. 50% of the rated lamp life or 1 year.

Whichever comes first

Whichever comes first.

103 inch Plasma displays 3 year (burn-in not covered)

3 year

Marking or retained images (sometimes called “burn-in”) resulting from the display of

fixed images on video display products are not defects and are not covered under

this warranty.

Hard Drive Disk Unit

1 year plus balance (if any) of 1 year

the original Manufacturer’s

Limited Warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR

ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.

(Content not covered)

• Dust, smoke, rental/staging environment and twenty-four/seven operation,

dramatically decreases the interval between performances of routine preventive

maintenance required to maintain this warranty coverage.

In certain instances, some jurisdictions do not allow the exclusion or limitation of

incidental or consequential damages, or the exclusion of implied warranties, so the

above limitations and exclusions may not be applicable.

Warranty Service

If the product needs to be shipped for service, carefully pack (preferably in the

original carton) and enclose a letter, detailing the complaint. Send prepaid and

adequately insured to the local authorized Panasonic Service Centre in your

area or to Panasonic Technical Support and Product Services Department, 5770

Ambler Drive, Mississauga, Ontario, L4W 2T3. Shipping to the latter location

requires a return authorization before shipment. No liability is assumed for loss

or damage to the product while in transit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customer’s Record

The model number and serial number of this product can be found on its back cover. You should note this serial number

in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase

to aid in identiﬁcation in the event of theft or loss, and for Warranty Service purposes.

Model Number

Serial Number

Panasonic Corporation 2009

Panasonic Professional Display Company

Unit of Panasonic Corporation of North America

Executive Ofﬁce :

One Panasonic Way 1F-10, Secaucus, NJ 07094

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3

Printed in Japan

M1009S0

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Dishwasher G 5280 User Manual
Miele Washer G 7804 User Manual
Miele Washer G 7827 User Manual
Nady Systems Microphone 401XQ2HT2LTE4FHE User Manual
National Instruments Computer Hardware 321372C 01 User Manual
National Instruments Digital Camera NI 17xx User Manual
Nokia Network Card M10 User Manual
Oki All in One Printer 1624n MFP User Manual
Panasonic Air Conditioner CW XC83YU User Manual
Panasonic Network Card MAZDxxxG Series User Manual