Panasonic DVD Recorder DMR E51 User Manual

DVD Video Recorder  
Operating Instructions  
Model No. DMR-E51  
Model No. DMR-E50  
Before connecting, operating or adjusting this product,  
please read these instructions completely.  
Please keep this manual for future reference.  
RQT6998-G  
GCS GN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keep this page open as you read through the Operating Instructions. Refer to it for the control and component names and numbers which  
appear in the text.  
A K  
1
B @ N <  
OPEN/CLOSE  
CH  
REC MODE  
REC  
ERASE  
TIMER REC  
IN  
VIDEO IN  
L/MONO  
AUDIO IN  
R
S-VIDEO  
TIME SLIP  
TIME SLIP  
/a1.3  
AV2  
I 7 E  
DVD  
TV  
DVD  
TV  
Í
Í
REC  
G-Code  
AV  
REC MODE  
1
4
7
2
3
6
CH  
5
8
0
VOLUME  
9
CANCEL  
-/--  
SKIP  
SLOW/SEARCH  
PAUSE  
Hold both sides of the remote control’s cover to open it. (You can  
also open it by pressing on the center of it and sliding it down.)  
DIRECT NAVIGATOR  
PLAY LIST  
MENU  
FUNCTIONS  
PROG/CHECK  
RETURN  
TIMER  
DISPLAY TIME SLIP  
TOP  
MENU  
ENTER  
OPEN/CLOSE F Rec  
INPUT SELECT STATUS  
FRAME  
DISPLAY  
A
B
C
D
FUNCTIONS  
RETURN  
ERASE  
AUDIO  
POSITION MEMORY MARKER  
PROG/CHECK TIMER MANUAL SKIP TIME SLIP  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control reference guide  
Remote control  
Main unit  
Page  
Page  
(37)Remote control signal sensor . . . . . . . . . . . . . . . . . . . . . 7  
(38)Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
(39)AV2 input terminals (AV2). . . . . . . . . . . . . . . . . . . . . . . . 49  
(1) DVD on/off button (Í, DVD) . . . . . . . . . . . . . . . . . . . . . . 12  
To switch the unit from on to standby mode or vice versa. In  
the standby mode, the unit is still connected to the mains.  
In standby mode, the unit is still consuming a small amount  
of power.  
(40)Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
(41)Time slip indicator (TIME SLIP)  
5
(2) G-CODE button (G-Code). . . . . . . . . . . . . . . . . . . . . . . . . . 24  
While both recording and play are activated, this indicator  
lights up.  
(42)Skip/Slow/Search buttons (:/6, 5/9) . . . . . . 14  
(3) Television input mode selector (AV). . . . . . . . . . . . . . . .  
7
7
(4) Numeric buttons (0–9, – /– –) . . . . . . . . . . . . . . . . . . . . .  
When selecting a title, chapter, track, programme or play list  
Example: “5”:  
Example: “15”: [1] )[5]  
When selecting a page of play list scene and item of MP3  
[0] )[5]  
Buttons such as 1 function the same as the controls on the  
remote control.  
Example: “5”:  
Example: “15”: [0] )[1] )[5]  
When selecting a television channel  
Example: “5”:  
Example: “15”:  
[0] )[0] )[5]  
ªEntering titles  
(page 29)  
To enter characters  
[5]  
[
Use [3, 4, 2, 1] (10) to select the character you want to  
enter and press [ENTER] (10).  
] )[1] )[5]  
(5) Cancel button (CANCEL). . . . . . . . . . . . . . . . . . . . . . . . . 17  
(6) Skip buttons (:, 9, SKIP). . . . . . . . . . . . . . . . . . . . 15  
(7) Stop button (, STOP). . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
(8) Pause button (;, PAUSE) . . . . . . . . . . . . . . . . . . . . . . . . 13  
(9) Direct Navigator and Top menu button  
ENTER  
(DIRECT NAVIGATOR, TOP MENU). . . . . . . . . . . . . . 13, 33  
(10)Cursor buttons (3, 4, 2, 1)/  
Enter button (ENTER) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
(11)Function button (FUNCTIONS) . . . . . . . . . . . . . . . . . . . . 22  
To erase characters  
Press [;] (8). (You can also erase characters by using  
[3, 4, 2, 1] (10) to select “ERASE” and pressing [ENTER]  
(10).)  
(12)Timer recording button ( , TIMER). . . . . . . . . . . . . . . . 24  
(13)Manual programming and check button  
PAUSE  
(PROG/CHECK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
(14)TV on/off button (Í, TV) . . . . . . . . . . . . . . . . . . . . . . . . .  
(15)DVD/TV switch (DVD, TV). . . . . . . . . . . . . . . . . . . . . . . . .  
7
7
(16)Recording button (¥, REC) . . . . . . . . . . . . . . . . . . . . . . . 19  
(17)Recording mode button (REC MODE) . . . . . . . . . . . . . . 19  
(18)Channel up/down buttons (W, X, CH). . . . . . . . . . . . . . . 19  
ENTER  
(19)TV volume up/down buttons (r, s, VOLUME). . . . . . . .  
7
(20)Slow/Search buttons (6, 5, SLOW/SEARCH) . . . . 14  
(21)Play/t1.3 button (1, PLAY/t1.3) . . . . . . . . . . . . . . . . . . 13  
(22)Play List and Menu button (PLAY LIST, MENU). . . . 13, 37  
(23)Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . 12  
(24)Manual skip button (MANUAL SKIP) . . . . . . . . . . . . . . . 15  
(25)Time slip button (TIME SLIP) . . . . . . . . . . . . . . . . . . . . . 22  
(26)Flexible recording button (F Rec). . . . . . . . . . . . . . . . . . 20  
(27)Disc tray open/close button (<, OPEN/CLOSE) . . . . . . 13  
(28)Status display button (STATUS)/  
To finish entering the title  
Press [] (7). (You can also finish entering the title by using  
[3, 4, 2, 1] (10) to select “SET” and pressing [ENTER]  
(10).)  
[B] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59  
(29)Input select button (INPUT SELECT)/  
ENTER  
[A] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 57  
(30)Erase button (ERASE) . . . . . . . . . . . . . . . . . . . . . . . . 13, 39  
(31)Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
(32)Frame advance and frame reverse buttons  
(2;, ;1, FRAME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
(33)[C] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
(34)Display button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . . 43  
(35)Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . 17  
(36)Position memory button (POSITION MEMORY) . . . . . . 14  
To enter a space  
You may enter a space by pressing [-/--] (4) and then press  
[ENTER] (10).  
1
4
7
2
3
6
5
8
0
9
-/--  
ENTER  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control reference guide (continued)  
The unit’s display  
Rotating (REC): recording  
Rotating (REC, PLAY):  
Rotating (PLAY): playing  
Stopped (REC): recording paused  
recording and playing simultaneously or  
Time Slip is in progress  
Stopped (PLAY): play paused  
(1)  
(2)  
(5)  
(6)  
(3)  
(4)  
(7)  
(8)  
(1) Recording indicator (REC)  
(6) DVD indicator  
On:  
Flashes:  
while recording  
when you press [Í, DVD] (1) to turn the unit off until it actually  
turns off  
(7) Channel  
(2) Timer programme display  
On:  
1, 2, 3, ....., 99 / A1, A2, A3,  
(8) Main display section  
Timer recording  
when a programme for timer recording is on  
(3) Disc type  
DVD-RAM: DVD-RAM  
DVD-R: DVD-R  
DVD-V: DVD-Video  
VCD: Video CD  
Recording and play counter  
Remaining recording time  
Current time  
Title, track, chapter, group  
Miscellaneous messages  
etc.  
Remaining recording time:  
(For example)  
1 hour )Displayed as “R 1:00”  
CD: Audio CD, MP3 disc  
(4) The display mode of the main display section  
GRP: group number  
TITLE: title number  
TRACK: track number  
CHAP: chapter number  
PG: programme number  
PL: play list number  
(5) Recording mode (pages 19 and 25)  
XP: High-quality mode  
SP: Normal mode  
LP: Long play mode  
EP: Extra long play mode  
XP SP LP EP (all on):  
FR mode (in flexible recording or in timer recording)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Important Information  
Avoid:  
Humidity and dust.  
Extreme heat such as direct sunlight.  
Magnets or electromagnetic objects.  
Touching internal parts of the unit.  
CAUTION!  
THIS PRODUCT UTILIZES A LASER.  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN THOSE  
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
Water or some other liquid.  
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
Lightning. (Disconnect the aerial plug from the unit during  
lightning storms.)  
Anything heavy on the unit.  
WARNING:  
Connecting or handling the equipment with wet hands.  
Using a cell phone near the unit because doing so may cause  
noise to adversely affect the picture and sound.  
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR  
PRODUCT DAMAGE, DO NOT EXPOSE THIS EQUIPMENT  
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND  
ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH  
AS VASES, SHALL BE PLACED ON THE EQUIPMENT.  
Do:  
Wipe the unit with a clean and dry cloth.  
Install the unit in a horizontal position.  
Keep the unit, TV and other equipment switched off until you  
have finished all connections.  
As this equipment gets hot during use, operate it in a well  
ventilated place;  
do not install this equipment in a confined space such as  
a book case or similar unit.  
G-CODE is a trademark of Gemstar Development Corporation.  
The G-CODE system is manufactured under license from  
Gemstar Development Corporation.  
Important  
Your attention is drawn to the fact that the recording of  
pre-recorded tapes or discs or other published or broadcast  
material may infringe copyright laws.  
G-CODE is a registered trademark of Gemstar Development  
Corporation. The G-CODE system is manufactured under  
license from Gemstar Development Corporation.  
For your safety  
MPEG Layer-3 audio decoding technology licensed from  
Fraunhofer IIS and Thomson multimedia.  
Do not remove outer cover.  
Touching internal parts of the unit is dangerous, and may seriously  
damage it.  
To prevent electric shock, do not remove cover. There are no user  
serviceable parts inside. Refer all servicing to qualified service  
personnel.  
Notes on these instructions  
These operating instructions describe operations mainly using the  
remote control. If the name of the button is the same, the operation  
described can also be performed with the main unit.  
The contents of the screens used in these instructions may not  
necessarily match what you will see on your screen.  
Disposal of old equipment  
Batteries, packaging and old equipment should not be  
disposed of as domestic waste, but in accordance with  
the applicable regulations.  
Displays  
The displays shown in these instructions are examples only. Actual  
displays depends on the disc being played.  
Cautions before you operate this unit  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of  
Dolby Laboratories.  
Do not place in an enclosed area so that the rear cooling fan and  
the cooling vents on the side are covered up.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater  
Systems, Inc.  
Standard Accessories  
1 pc. RF Coaxial cable  
1 pc. Remote Control  
(EUR7615LC0)  
2 pcs. R6 size batteries  
1 pc. AC mains lead  
1 pc. Audio/Video cable  
Inside of unit  
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.  
DANGER  
(FDA 21 CFR)  
AVOID DIRECT EXPOSURE TO BEAM.  
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.  
CAUTION  
ATTENTION  
ADVARSEL  
VARO!  
(IEC60825-1)  
AVOID EXPOSURE TO BEAM.  
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.  
UNDGÅ UDSÆTTELSE FOR STRÅLING.  
AVATTAESSA OLET ALTTIINA NÄKYMÄTÖN  
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.  
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL  
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.  
VARNING  
ADVARSEL  
VORSICHT  
SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.  
UNNGÅ EKSPONERING FOR STRÅLEN.  
RF IN  
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG  
GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.  
R
R
-
-
AUDIO  
AUDIO  
-
-
L
L
VIDEO S-VIDEO  
Y
P
B
PR  
OPTICAL  
RF OUT  
COMPONENT  
VIDEO OUT  
(NTSC:480P/480I,  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
VIDEO S-VIDEO  
R
-
AUDIO  
-
L
VIDEO  
S-VIDEO  
P
AL:576I)  
RQLS0233  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
The remote control  
Batteries  
Television operation  
You can control televisions by changing the remote control code.  
Insert so the poles (- and +) match those in the remote control.  
Do not use rechargeable type batteries.  
Preparation  
Turn on the television.  
Switch [DVD, TV] (15) to “TV”.  
R6, AA, UM-3  
1
2
Refer to the chart below for the code for your  
television.  
Press and hold [TV, Í] (14) and enter the two-digit  
code with the numeric buttons (4).  
For example: 01, press [0] )[1].  
After entering the code, test the remote control by turning on  
the television and changing channels.  
Notes  
Do not;  
If there is more than one code, repeat the procedure until you find  
the code that allows correct operation.  
mix old and new batteries  
use different types at the same time  
heat or expose to flame  
take apart or short circuit  
attempt to recharge alkaline or manganese batteries  
use batteries if the covering has been peeled off  
Repeat this procedure after you change the batteries.  
If your television brand is not listed or if the code listed for your  
television does not allow control of your television, this remote is  
not compatible with your television.  
List of TVs Compatible with the unit’s Remote Control  
Mishandling of batteries can cause electrolyte leakage which can  
damage items the fluid contacts and may cause a fire.  
If electrolyte leaks from the batteries, consult your dealer.  
Wash thoroughly with water if electrolyte comes in contact with any  
part of your body.  
Brand:  
Code  
Panasonic/National  
SONY  
01, 02, 03, 04  
05  
TOSHIBA  
JVC  
06  
07  
Remove if the remote control is not going to be used for a long  
period of time. Store in a cool, dark place.  
Replace if the unit does not respond to the remote control even  
when held close to the front panel.  
HITACHI  
08  
MITSUBISHI  
SHARP  
09, 10  
11  
PHILIPS, SAMSUNG  
NEC  
12  
13  
Use  
SANYO  
14  
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m  
directly in front of the unit.  
GOLDSTAR/LG  
SAMSUNG  
SANYO  
15, 16  
17, 18  
19  
Keep the transmission window and the unit’s sensor free from  
dust.  
Operation can be affected by strong light sources, such as direct  
sunlight, and the glass doors on cabinets.  
Operation:  
On and off:  
Video input mode:  
Channels:  
Volume:  
Numeric:  
Button  
[TV, Í] (14)  
[AV] (3)  
[W, X, CH] (18)  
[i, j, VOLUME] (19)  
[0-9, -/--] (4)  
(1)  
(2)  
20  
20  
30  
30  
DVD  
TV  
(3)  
(1) Remote control signal sensor  
(2) 7 m directly in front of the unit.  
(3) Switch [DVD, TV] (15) to “DVD”.  
Do not;  
put heavy objects on the remote control  
take the remote control apart  
spill liquids onto the remote control  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs  
This unit cannot record to discs containing both PAL and NTSC  
signals. Play of discs recorded with both PAL and NTSC on  
another unit is not guaranteed.  
Discs you can use  
The features you can use with the different types of discs are  
indicated as follows.  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
Play-only discs  
Discs you can play-only and their logos  
Video  
CDs  
DVD-RAM  
DVD-R  
DVD-Video  
Disc  
type  
Indication used  
in instructions  
Audio  
CDs  
MP3  
discs  
Logo  
Video system  
For your reference  
[DVD-R] indicates DVD-R that have not yet been finalized  
(page 32) and can still be recorded on.  
DVD-R that have been finalized can use the same features as  
DVD-Video. (Refer to features indicated [DVD-V].)  
DVD-  
Video  
PAL/NTSC  
[DVD-V]  
Discs you can use for recording and play  
Logos for the discs you can record on and play  
Audio  
CD  
[CD]  
Disc  
type  
Indication used  
in instructions  
Logo  
Regulation  
4.7 GB/9.4 GB,  
12 cm (5z)  
2.8 GB, 8 cm (3z)  
Video  
CD  
DVD-  
RAM  
PAL/NTSC  
[VCD]  
[MP3]  
[RAM]  
CD  
4.7 GB, 12 cm (5z)  
1.4 GB, 8 cm (3z)  
for General Ver.2.0  
DVD-  
R
[DVD-R]  
Region Management Information (DVD-Video only)  
Region number are allocated to DVD players and  
software according to where they are sold.  
3
For Asia: “3”  
For Australia, New Zealand: “4”  
The manufacturer accepts no responsibility and offers no  
compensation for loss of recorded or edited material due to a  
problem with the unit or disc, and accepts no responsibility  
and offers no compensation for any subsequent damage  
caused by such loss.  
Examples of causes of such losses are  
(1) A disc recorded and edited with this unit is played in a DVD  
recorder or computer disc drive manufactured by another  
company.  
(2) A disc used as described in (1) and then played again in this  
unit.  
(3) A disc recorded and edited with a DVD recorder or computer  
disc drive manufactured by another company is played in this  
unit.  
DVD-Video can be played on this unit if their region  
number is the same or includes the same number, or if  
the DVD is marked “ALL”. Confirm the region number for  
this unit before choosing discs. The number for this unit is  
indicated on the rear panel of the unit.  
4
ALL  
Playing CD-R and CD-RW  
This unit can play CD-DA (digital audio), MP3 and Video  
CD format, audio CD-R and CD-RW that have been  
finalized*upon completion of recording.  
It may not be able to play some CD-R or CD-RW due to the  
condition of the recording.  
2
3
4
* Finalize: A process that allows play on compatible equipment.  
Notes  
Note  
This unit is compatible with the Content Protection for  
Recordable Media (CPRM) system so you can record broadcasts  
that allow one copy, such as some CATV broadcasts, onto  
4.7 GB/9.4 GB DVD-RAM (these are CPRM compatible). It is not  
possible to record onto DVD-R or 2.8 GB DVD-RAM.  
Do not allow the disc to become dirty or scratched. Fingerprints,  
dirt, dust, and scratches on the recording surface may make it  
impossible to use the disc for recording.  
The producer of the material can control how these discs are  
played. This means that you may not be able to control play of a  
disc with some operations described in these operating  
instructions. Read the disc’s instructions carefully.  
If you use DVD-RAM cartridges, you can protect your recordings  
with the write protected tab (page 64). With the tab in this  
position, you cannot record to the disc, delete programmes with  
the direct navigator, edit with the play list screen, or format the  
disc.  
This unit is compatible with both non-cartridge and cartridge  
DVD-RAM, but cartridge-type discs give better protection to your  
valuable recordings.  
For your reference  
DVD-RAM recorded on this unit cannot be played on  
incompatible players (including players manufactured by  
Panasonic).  
Using a Panasonic DVD-RAM, you can record broadcasts that  
allow you to make one copy, such as some satellite broadcasts.  
This unit cannot record PAL signals to discs containing NTSC  
signals or vice versa.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs (continued)  
Discs that cannot be played  
DVD-Video with a region number other than the number for this  
Audio format logos  
Dolby Digital (pages 46 and 61)  
unit or “All”  
This unit can play Dolby Digital in stereo  
Some DVD-R  
DVD-RAM (2.6 GB/5.2 GB)  
(2 channels). Connect an amplifier with a built-in  
Dolby Digital decoder to enjoy surround sound.  
DVD-ROM  
DVD-RW  
DVD-Audio  
≥iRW  
DTS Digital Surround (pages 46 and 61)  
Connect this unit to equipment that has a DTS  
decoder to enjoy DVDs with this mark.  
CD-ROM  
CDV  
CD-G  
CVD  
SVCD  
SACD  
Types of disc for the type of connected  
TV  
When you use the discs recorded either PAL or NTSC, refer to this  
table.  
MV-Disc  
PD  
Photo CD  
Divx Video Disc, etc.  
Play of non-standard Video CDs and Super Video CDs is not  
guaranteed.  
TV type  
Disc  
PAL  
Yes/No  
Yes  
Multi-  
system TV  
NTSC  
PAL  
Yes  
No  
DVD-R  
NTSC TV  
PAL TV  
You can play DVD-R on compatible DVD players by finalizing  
[the process that allows recordings on DVD-R to be played on  
compatible DVD players, (page 32)] them on this unit,  
effectively making them into DVD-Video.  
NTSC  
PAL  
Yes*1  
Yes  
NTSC  
Yes*2 (PAL60)  
ªBefore finalizing  
You can record onto the available space on the disc and perform  
editing functions, such as giving titles to discs and programmes  
and erasing programmes.  
You cannot record to or edit DVD-R with this unit if it was recorded  
with another unit, whether it is finalized or not.  
*1 If you select “NTSC” in “TV System” (page 53), the picture may  
be clearer.  
*2 If your television is not equipped to handle PAL 525/60 signals  
the picture will not be shown correctly.  
You cannot record over parts that have been recorded.  
Erasing programmes will not increase the disc’s available time.  
Discs and accessories  
DVD-RAM  
You can also record signals which allow you to make one copy,  
onto these discs.  
ªAfter finalizing  
The video and audio is recorded according to the DVD-Video  
specifications, and your very own DVD-Video is created.  
The titles you entered with this unit appear as menus.  
Programmes longer than 5 minutes are divided into 5-minute  
chapters.  
9.4-GB, double-sided, type 4 cartridge:  
LM-AD240E  
4.7-GB, single-sided, type 2 cartridge:  
LM-AB120E  
(set of 3, LM-AB120E3)  
4.7-GB, single-sided, non-cartridge:  
LM-AF120E  
These DVD-R can no longer be recorded on or edited.  
These DVD-R can be played on other DVD players, but this is not  
guaranteed.  
(set of 3, LM-AF120E3)  
DVD-R  
4.7-GB, single-sided, non-cartridge:  
LM-RF120E  
DVD-RAM/PD Disc cleaner:  
LF-K200DCA1  
Play may not be possible due to the player you are using, the  
DVD-R, or the condition of the recording. Use this unit to play the  
disc if the player is unable.  
For your reference  
It takes about 30 seconds for the unit to complete recording  
management information after recording finishes.  
To record on DVD-R, this unit optimizes the disc for each  
recording. Optimizing is carried out when you start recording after  
inserting the disc or turning the unit on. Recording may become  
impossible after the disc is optimized more than 50 times.  
The first 30 seconds of a programme may not be recorded if you  
make successive timer recordings.  
DVD-RAM/PD Lens cleaner:  
LF-K123LCA1  
The video is recorded in a 4:3 aspect irrespective of the video  
signal input. Use the television’s screen modes to change the  
screen size for play.  
Some broadcasts carry signals that allow you to make one copy,  
but you cannot record these broadcast with DVD-R. Use  
DVD-RAM to record these kinds of broadcast.  
Play may be impossible in some cases due the condition of the  
recording.  
We recommend using DVD-R manufactured by Panasonic as  
they have been tested to be compatible with this unit.  
You cannot change audio type if a DVD-R is in the unit. Select  
the audio type (M1 or M2) before recording by going to “Bilingual  
Audio Selection” in the “Sound” menu.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting and Setting up  
First of all, please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting  
cables.  
Use an Audio/Video cable or Audio/S-Video cable.  
Follow these steps if you connect your unit to a television using an RF Coaxial cable and an Audio/Video cable. (AV Connection)  
An RF Coaxial cable must be connected to watch television even if an Audio/Video cable is also used to connect unit to the television  
(2)  
(1)  
3
RF IN  
R
R
-
-
AUDIO  
AUDIO  
-
-
L
L
VIDEO S-VIDEO  
Y
P
B
PR  
OPTICAL  
RF OUT  
COMPONENT  
VIDEO OUT  
(NTSC:480P/480I,  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
VIDEO S-VIDEO  
R
-
AUDIO  
-
L
VIDEO  
S-VIDEO  
PAL:576I)  
(4)  
1
(3)  
4
(5)  
5
2
Sockets  
ªConnect as following steps  
(1) Audio/Video Output socket  
(2) Aerial Input socket  
(3) Aerial Output socket  
(4) Aerial Input socket  
1
2
3
4
5
RF Coaxial cable (supplied)  
Audio/Video cable (supplied)  
Aerial lead (not supplied)  
AC mains leads (supplied)  
AC mains leads (not supplied)  
(5) Audio/Video Input socket  
Download from Www.Somanuals.co1m0. All Manuals Search And Download.  
Connecting and Setting up (continued)  
Follow these steps if you connect your unit to a television using an S-Video cable. (S-Video Connection)  
An RF Coaxial cable must be connected to watch television.  
(3)  
(2) (1)  
4
RF IN  
R
R
-
-
AUDIO  
AUDIO  
-
-
L
L
VIDEO S-VIDEO  
Y
P
B
PR  
OPTICAL  
(6)  
RF OUT  
COMPONENT  
VIDEO OUT  
(NTSC:480P/480I,  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
VIDEO S-VIDEO  
R
-
AUDIO  
-
L
VIDEO  
S-VIDEO  
PAL:576I)  
(5)  
1
(4)  
3
5
(7)  
6
2
Sockets  
(1) S-Video Output socket  
(2) Audio/Video Output socket  
(3) Aerial Input socket  
(4) Aerial Output socket  
(5) Aerial Input socket  
ªConnect as following steps  
1
2
3
4
5
6
RF Coaxial cable (supplied)  
Audio/Video cable (supplied)  
S-Video cable (not supplied)  
Aerial lead (not supplied)  
AC mains leads (supplied)  
AC mains leads (not supplied)  
(6) S-Video Input socket  
(7) Audio/Video Input socket  
Do not connect the unit through a video cassette recorder  
Video signals fed through video cassette recorders will be affected by copyright protection  
systems and the picture will not be shown correctly on the television.  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
Connecting and Setting up (continued)  
Selecting TV screen type  
The aspect ratio is factory set to 4:3 for a regular television. You do  
not have to change this setting if you have a regular 4:3 aspect  
television.  
Auto Setup  
Auto Setup automatically tunes all available stations.  
1
Press [DVD, Í] (1) to switch the unit on.  
DMR-E51GCS: Auto-Setup screen appears on the television  
and go to step 3.  
Preparation  
Turn on the television and select the appropriate video input to  
suit the connections to this unit.  
Switch [DVD, TV] (15) to “DVD”.  
DMR-E50GN: The Country setting menu appears on the  
television.  
Country  
1
2
Press [DVD, Í] (1) to turn this unit on.  
Press [FUNCTIONS] (11) to show the FUNCTIONS  
window.  
Australia  
New Zealand  
Others  
3
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
SELECT  
ENTER  
RETURN  
DVD-RAM  
RETURN  
:
leave ENTER  
:
access  
Disc Protection Off  
FUNCTIONS  
Cartridge Protection Off  
2
3
Use [3, 4, 2, 1] (10) to select the country and  
press [ENTER] (10).  
Auto Setup starts.  
S
S
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST  
SELECT  
TIMER RECORDING  
SETUP  
PLAY  
PLAY LIST  
This takes about 5 minutes.  
ENTER  
RETURN  
TOP PLAY  
FLEXIBLE REC  
Auto-Setup  
4
5
Use [3, 4] (10) to select the “Connection” and  
press [2] or [1] (10).  
Use [3, 4] (10) to select “TV Aspect” and press  
[ENTER] (10).  
128  
Auto-Setup in progress, please wait.  
RETURN: to abort  
SETUP  
TV Aspect  
RETURN  
Progressive (NTSC)  
TV System  
Tuning  
Normal (4:3) TV  
Settings  
Norm (4:3)TV Settings (DVD-Video)  
Disc  
To cancel Auto Setup before it finishes  
Press [RETURN] (23).  
Norm (4:3)TV Settings (DVD-RAM)  
Picture  
Sound  
SELECT  
ENTER  
Tab  
Display  
Connection  
The clock setting menu appears after Auto Setup  
finishes  
RETURN  
6
Use [3, 4] (10) to select the TV aspect and press  
[ENTER] (10).  
(1) Use [3, 4, 2, 1] (10) to set the correct time and date.  
(2) Press [ENTER] (10) to conclude the setting.  
TV Aspect  
SETUP  
To confirm that stations have been tuned correctly  
Norm (4:3)  
Wide (16:9)  
See page 56.  
Tuning  
Settings  
Disc  
Picture  
Sound  
When no stations have been set, confirm all  
connections and restart Auto Setup  
See page 57 and Hint below.  
SELECT  
ENTER  
Display  
Connection  
RETURN  
When station names or channel numbers have not  
been set correctly  
See page 56.  
4:3 (factory setting)  
16:9  
ªTo return to the previous screen  
Press [RETURN] (23).  
Hint  
You can restart the Auto Setup if the screen of the unit’s tuner is  
displayed in the stop mode. Hold down [W, CH] (18) and [X, CH]  
(18) on the main unit simultaneously for about 5 seconds.  
For your reference  
Apart from “TV Aspect”, other settings also affect how video  
appears on your television. Check the following if video doesn’t  
appear correctly on your television.  
“ConnectionNorm (4:3) TV Settings (DVD-RAM)” or “Norm  
(4:3) TV Settings (DVD-Video)” (page 53).  
The video setting on the disc. How video appears is often  
specified by the disc itself.  
The video settings on your television.  
Download from Www.Somanuals.co1m2. All Manuals Search And Download.  
Playing discs  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
When a menu screen appears on the television  
[DVD-V] [VCD]  
Preparation  
Operate menus with the following operations. Actual operations  
depend on the disc.  
Switch [DVD, TV] (15) to “DVD”.  
1
2
Press [DVD, Í] (1) to turn the unit on.  
Press [<, OPEN/CLOSE] (27) to open the tray and  
insert a disc.  
Press the numeric buttons (4) to select an item, or move  
[3, 4, 2, 1] (10) to select an item and press [ENTER] (10).  
You can return to menus after you start play by pressing  
[TOP MENU] (9) or [MENU] (22) (DVD-Video), or [RETURN]  
(23) (Video CD).  
(2)  
Note  
The disc continues to rotate while the menu is displayed even  
after you finish playing an item. Press [] (7) when you finish to  
preserve the unit’s motor and your television screen.  
(1)  
For your reference  
e.g.: DVD-RAM  
(1) Arrow pointing inwards.  
(2) Align correctly.  
Insert label-up with the arrow facing in. (With double-sided  
discs, load so the label for the side you want to play is facing  
up.)  
Insert inside the tray’s guides.  
Insert one disc only.  
If “ ” appears on the television  
The operation is prohibited by the unit or disc.  
[RAM] [DVD-R]  
Play starts from the beginning of the most recent recording. If that  
programme is extremely short, play starts from the next most  
recent recording. Use “TOP PLAY” in the FUNCTIONS window  
(page 22) to start play from the oldest programme on the disc  
(programme 1).  
3
Press [1] (21).  
The disc tray closes and play begins.  
(The unit takes some time to read the  
disc before play starts.)  
Erasing a programme that is being  
played  
If the Resume function (page 14) is not  
active, playback will begin from the most  
recently recorded programme. [RAM] [DVD-R]  
Play starts from the beginning of the disc. [DVD-V] [CD] [VCD]  
[MP3]  
If you insert a DVD-RAM with the write-protect tab set to  
“PROTECT” (page 64) and press [<, OPEN/CLOSE] (27),  
play starts automatically.  
[RAM] [DVD-R]  
Since the programme in playback and all the play lists  
(page 38) created during its playback are erased irretrievably,  
you should make sure if the desired programme has been  
selected before carrying out.  
1
During play  
Press [ERASE] (30).  
Erase Programme  
ªTo stop play  
Press [] (7). (page 14, “Starting play  
Remaining Time  
0 : 58 SP  
Corresponding PLAY LIST will also be erased.  
from where you stopped it”)  
Erase  
Cancel  
SELECT  
A screen similar to the illustrated may  
appear when you stop play. Press []  
(7) again and you can use this unit’s  
tuner to watch television.  
This screen is also shown when you are  
playing CDs.  
Erase  
ENTER  
RETURN  
ENTER  
SELECT  
The menu disappear about 10 seconds later.  
2
Use [2] (10) or [:/6] (42) to select “Erase”  
and press [ENTER] (10) or [ERASE] (30).  
Use [1] (10) or [5/9] (42) to select “Cancel” and press  
[ENTER] (10) or [ERASE] (30), or press [RETURN] (23) to  
cancel.  
ªTo pause play  
Press [;] (8).  
Press again to restart playing.  
ªWith non-cartridge discs  
Notes  
(1)  
It is not possible to erase a programme when you are carrying  
out simultaneous recording and play (page 21).  
It is not possible to erase a programme that is in the process of  
being recorded.  
The available recording time on DVD-R does not increase when  
you erase programmes.  
(2) (3)  
(1) Insert label-up. (With double-sided discs, load so the label for  
the side you want to play is facing up.)  
(2) Guide for 12 cm (5q) disc  
(3) Guide for 8 cm (3q) disc  
Download from Www.Somanuals.co1m3. All Manuals Search And Download.  
Playing discs (continued)  
Quick View (Play t1.3)  
[RAM]  
Fast forward and rewind—SEARCH  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
During play  
During play or Time Slip, you can play faster than the normal play  
to save time by Quick View function.  
Press [6, SLOW/SEARCH] or [5, SLOW/SEARCH]  
(20).  
[6]: backward  
[5]: forward  
During play  
Press and hold [1] (21) for about 1 second.  
DVD-RAM  
PLAY x1.3  
DVD-RAM  
L
R
L
R
Press [1] (21) to return to normal play.  
You cannot use this feature if the “PLAY k1.3 & Audio during  
Search” of “Sound” is “Off” (page 52).  
This feature can be activated only on DVD-RAM recorded with  
Dolby Digital.  
Simultaneous recording and play with Quick View (Play k1.3) is  
possible only during SP, LP and EP recording mode.  
Quick View (Play k1.3) cannot operate when “editing menu” is  
displayed. (pages 36, 38, 40 and 41)  
During Quick View (Play k1.3), the Digital Audio Output will  
change to PCM Output.  
During Quick View (Play k1.3), it may cause the picture to freeze  
for a moment when scenes change.  
If using the [:/6] or [5/9] (42) button on the unit,  
keep pressing the button for 1 or more seconds.  
There are 5 search speeds. Each press increases the search  
speed.  
The search speed is maintained when you release the button.  
Press [1] (21) to return to normal play.  
You will hear sound at speed one (only forward) when playing  
DVD-RAM, DVD-R, DVD-Video and Video CDs. You can turn  
this sound off if you want to (page 52, “Sound”PLAY k1.3 &  
Audio during Search” to “Off”).  
Sound is not heard during chasing play and simultaneous  
recording and play.  
Slow-motion play  
Starting play from where you stopped it  
(Resume Function)  
[RAM] [DVD-R] [DVD-V] [VCD]  
While paused  
Press [6, SLOW/SEARCH] or [5, SLOW/SEARCH]  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
(20).  
1
2
During play  
Press [] (7).  
The unit remembers the position.  
[6]: backward (does not work with Video CDs)  
[5]: forward  
Press [1] (21).  
Play starts from where you stopped it.  
If using the [:/6] or [5/9] (42) button on the unit,  
keep pressing the button for 1 or more seconds.  
There are 5 slow-motion speeds. Each press increases the slow-  
motion speed.  
e.g.: DVD-RAM  
ªTo cancel the resume function  
Press [] (7) while the unit remembers the position.  
The slow-motion speed is maintained when you release the  
button.  
(The position is also cleared when you turn the unit off.)  
Press [1] (21) to return to normal play.  
ªTo start play from a memorized position after turning  
the unit off  
Press [POSITION MEMORY] (36) during play.  
(The message “Position Memorized” appears on the television.)  
Now when you press [1] (21) after switching the unit to standby  
and back on, play starts from the memorized position.  
Frame-by-frame viewing  
[RAM] [DVD-R] [DVD-V] [VCD]  
Remote control only  
While paused  
Press [2;, FRAME] or [;1, FRAME] (32) or [2, 1]  
(10).  
[2;] or [2]: backward (does not work with Video CDs)  
For your reference  
[DVD-R] [DVD-V] [CD] [VCD] [MP3]  
The position memorized when you press [] (7) or  
[POSITION MEMORY] (36) is cleared when you open the disc  
tray.  
[;1] or [1]: forward  
Each press shows the next or previous frame.  
[RAM]  
Press [1] (21) to return to normal play.  
The position memory is written to the disc and remains intact until  
you mark a different position.  
You cannot mark positions if the disc is write-protected with DISC  
INFORMATION (page 30) or with the write protect tab (page 64).  
Release the protection before marking position.  
If you press [] (7) before switching the unit to standby after  
pressing [POSITION MEMORY] (36) to memorize a position,  
play will resume from the position you pressed [] (7) when you  
press [1] (21).  
Download from Www.Somanuals.co1m4. All Manuals Search And Download.  
Playing discs (continued)  
Skipping  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
Manual Skip  
[RAM] [DVD-R]  
You can skip to the beginning of tracks (page 62) and chapters  
(page 62) and restart play from there.  
On DVD-RAM and DVD-R, you can skip to the start of a  
programme and start play from there.  
The section between the point where recording is started and the  
point where it is stopped is called a “programme”.  
Remote control only  
You can skip commercials easily with this feature.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
During play  
Press [MANUAL SKIP] (24).  
Play restarts from approximately 30 seconds later.  
During play or while paused  
Press [:, SKIP] or [9, SKIP] (6).  
[:]: backward  
[9]: forward  
Each press increases the number of skips.  
Selecting an amount of time to skip—  
Time Slip  
[RAM] [DVD-R]  
For your reference  
After skipping, the unit returns to the previous state, play or  
pause.  
You can set an amount of time and then skip with one press of a  
button.  
Press [1] (21) to restart play if it was paused.  
Pressing [:] or [9] (6) while a DVD menu is being shown  
or while the playback control feature on Video CDs (page 62) is  
working may take you to a menu screen.  
You can also mark positions to skip to (page 17).  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
1
During play  
Press [TIME SLIP] (25).  
(1)  
(4)  
(2)  
(2)  
0 min  
(3)  
(3)  
(4)  
(4)  
[:]  
[9]  
(1) Play position  
(2) Twice  
(3) Once  
2
Within 5 seconds  
Press [3, 4] (10) to enter the time and press  
[ENTER] (10).  
(4) Chapter/track  
(5)  
Play skips the time you entered.  
Press [3] (10) to increase or [4] (10) to decrease in one-  
minute units. Press and hold [3] (10) to increase or [4] (10)  
to decrease in 10-minute units.  
(1)  
(7)  
(2)  
(3)  
(3)  
(4)  
(4)  
(6)  
(8)  
–5 min  
[:]  
[9]  
(1) Play position  
(2) Marker  
(3) Twice  
(4) Once  
(5) Three times  
(6) The programme before  
(7) Current programme  
(8) The programme after  
Note  
You cannot use this feature while a “DIRECT NAVIGATOR”  
(page 33) or “PLAY LIST” (page 37) screen is being displayed.  
Starting play from a selected programme,  
title, chapter or track  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
Remote control only  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
During play  
Press the numeric buttons (4) to select the item.  
(page 4)  
This works only when stopped with some discs (the screen saver  
is on the television).  
Download from Www.Somanuals.co1m5. All Manuals Search And Download.  
Playing discs (continued)  
ªWhen you have connected the unit to other  
Changing audio  
equipment with an optical digital cable  
You cannot change the audio type when you have used only an  
optical digital cable for connection in the following cases:  
While playing stereo or bilingual broadcasts recorded on DVD-  
RAM.  
[RAM] [DVD-V] [VCD]  
Remote control only  
You can change the audio being received or played with the  
following procedure.  
While playing something recorded from other equipment.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
When using DVD-R  
You cannot use [AUDIO] (31) or the DISPLAY menu to change  
audio type when a DVD-R is in the disc tray.  
During reception or play  
Press [AUDIO] (31) to select the audio type.  
How the type changes depends on when you press the button.  
While receiving a bilingual TV broadcast  
ªWhile receiving a TV programme with Stereo  
When receiving a TV programme with the Stereo, Bilingual or  
NICAM sound system, the type of sound system in which it is  
broadcast is automatically indicated.  
You can use the SETUP menus to select which audio type is  
recorded, either “M1” or “M2”. “M1” is the default setting. (page 52,  
“Sound”Bilingual Audio Selection”)  
During play  
The audio type selected for recording is played. This is displayed  
as “LR”.  
DVD-RAM  
ARD  
STEREO  
L R  
(1)  
(1) e.g.: “STEREO” is selected  
STEREO:  
M1/M2:  
M1:  
When receiving a STEREO/NICAM stereo  
broadcast.  
When receiving a Bilingual/NICAM dual-sound  
broadcast.  
When receiving a NICAM monaural broadcast.  
ªWhile playing a television programme recorded on  
DVD-RAM  
If it is a recording of a stereo broadcast  
LR>L>R  
^-------------}  
DVD-RAM  
PLAY  
L R  
(2)  
(2) e.g.: “LR” is selected  
ªWhile playing a DVD Video  
You can change the audio channel number each time you press  
the button. This allows you to change things like the soundtrack  
language.  
1 ENG  
Î Digital 3/2.1ch  
Soundtrack  
Soundtrack  
(3)  
2 FRA  
Î Digital 3/2.1ch  
(4)  
(3) e.g.: English is the selected language  
(4) The language is switched to French  
ªWhile playing a Video CD  
LR>L>R  
^-------------}  
V-CD  
PLAY  
L R  
(5)  
(5) e.g.: “LR” is selected  
For your reference  
You can also use the DISPLAY menu to change the audio type.  
You can change the audio for the images being played with  
simultaneous recording and play and Time Slip.  
Download from Www.Somanuals.co1m6. All Manuals Search And Download.  
Playing discs (continued)  
Notes  
[RAM]  
Marking places to play againMARKER  
[RAM] [DVD-R]  
This feature doesn’t work while using a play list.  
Markers cannot be added to or removed from discs that are  
protected (pages 30 and 64).  
You can mark up to 999 points on a disc to return to later. These  
marks are recorded directly onto DVD-RAM, but are cleared when  
you removed or finalized DVD-R.  
[RAM] [DVD-R]  
[DVD-V] [CD] [VCD] [MP3]  
You can mark up to 5 points on a disc to return to later. All the  
markers are cleared when the disc tray is opened.  
The markers are ordered by time. This means that the marker  
numbers can change when you add and erase markers.  
[DVD-V] [CD] [VCD] [MP3]  
This feature only works if the elapsed playing time of the disc is  
shown on the unit’s display.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Some subtitles recorded around the marker may fail to appear.  
ªMarking positions directly  
During play  
Press [MARKER] (35).  
One marker is added.  
ªUsing DISPLAY menus to mark positions  
Displaying the marker icon  
1
During play  
Press [DISPLAY] (34).  
Disc  
Play  
1
Î Digital 2/0ch  
OFF  
L R  
Soundtrack  
Subtitle  
Picture  
Audio channel  
Sound  
2
Use [3, 4] (10) to select the Play tab and press [1]  
(10).  
Disc  
Play  
Picture  
Sound  
OFF  
Repeat Play  
Marker  
1s10  
††††††††††  
3
Use [3, 4] (10) to select “Marker” and press [1]  
(10) to highlight the first asterisk (¢).  
[RAM] [DVD-R]  
[DVD-V] [CD] [VCD] [MP3]  
1s10  
†††  
††††††††  
Marking positions  
1
2
Use [2, 1] (10) to select an asterisk (¢).  
Press [ENTER] (10).  
One marker is added.  
When marking positions 11 and above  
[RAM] [DVD-R]  
1
2
Use [2, 1] (10) to highlight “1–10”.  
Use [3, 4] (10) to select “11–20”.  
You can select the next group of 10 when the current group is  
full.  
3
4
Use [1] (10).  
The first asterisk is highlighted.  
Press [ENTER] (10) to mark a position.  
To play from a marked position  
1
2
Use [2, 1] (10) to select a marker number.  
Press [ENTER] (10).  
Play starts from the marked position.  
ªTo clear a marker  
Use [2, 1] (10) to select a marker number and press [CANCEL]  
(5).  
An asterisk replaces the number and the position is cleared.  
ªTo clear the DISPLAY menus  
Press [DISPLAY] (34).  
Download from Www.Somanuals.co1m7. All Manuals Search And Download.  
Playing discs (continued)  
ªNaming folders and files  
Using menus to play MP3 discs  
[MP3]  
This unit can play MP3 files recorded on CD-R/RW with a  
computer. Files are treated as tracks and folders are treated as  
groups.  
“Total” means total number of all MP3 files (all tracks in all groups)  
recorded in the disc.  
At the time of recording, give folder and file names a 3-digit  
numeric prefix in the order you want them to play (this may not  
work at times).  
Folder = Group  
001
001.mp3  
002.mp3  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
File = Track  
003.mp3  
002  
Track total = Total  
1
During stop or play  
Press [TOP MENU] (9) or [MENU] (22).  
The file list appears.  
004.mp3  
005.mp3  
003  
006.mp3  
007.mp3  
008.mp3  
009.mp3  
010.mp3  
Discs must conform to ISO9660 level 1 or 2 and Joliet (except for  
extended formats).  
MP3 files must have the extension “.MP3” or “.mp3”.  
This unit is not compatible with ID3 tags.  
English alphabets and a Arabic numerals are indicated properly.  
Other characters may not be indicated properly.  
Selected Group No. and Name  
G:  
The Group Number  
No.  
1
Total  
1
Group  
Track  
MENU  
T:  
:
MP3_MUSIC  
G
T
1
1
Tree  
1
001 Both Ends Freezing  
Track Number in the Group  
TOTAL  
1
1/ 24  
9
1
1
TOTAL:  
Selected Track Number /  
Total Track Number  
1
No.  
1
0
1
ªUsing the tree screen to find a group  
1
SELECT  
ENTER  
1
RETURN  
1
1
During stop or play  
Back  
Next  
Press [1] (10) while a track is highlighted to  
display the tree screen.  
2
Press [3, 4] (10) to select the track and press  
[ENTER] (10).  
Play continues to the last track in the last group.  
Tree  
Selected Group Number/  
MENU  
G
1/ 15  
3
G
T
1
1
MP3_MUSIC  
Total Group Number  
If the group has no  
track, “– –” is displayed  
as group number.  
001 My favorite  
001 Brazillian pops  
002 Chinese pops  
003 Czech pops  
004 PC Files  
005 Japanese pops  
006 Swedish pops  
001 Momoko  
TOTAL  
1/ 24  
9
“  
” indicates the track currently playing.  
You can also select the track with the numeric buttons (4),  
directly.  
e.g.: The track “006.mp3” of Group “002” of the illustration  
on top right,  
No.  
0
SELECT  
ENTER  
002 Standard Number  
001 Piano solo  
002 Vocal  
3
RETURN  
“6”:  
[0] )[0] )[6]  
The folder which the file of MP3 is not in through is indicated  
by black. Even if that folder is chosen, a file list doesn’t come  
out.  
The track “010.mp3” of Group “003” of the illustration  
on top right,  
“10”  
[0] )[1] )[0]  
2
Press [3, 4] (10) to select a group and press  
[ENTER] (10).  
The file list for the group appears.  
ªTo show other pages  
Press [3, 4, 2, 1] (10) to select “2 Back” or “Next 1” and  
press [ENTER] (10).  
After listing all the tracks in one group, the list for the next group  
appears.  
For your reference  
Press [2, 1] (10) to jump layers in the tree screen.  
ªTo exit the file list  
Press [TOP MENU] (9), [MENU] (22) or [RETURN] (23).  
ªTo return to the file list  
Press [RETURN] (23).  
Notes  
The order in which menu appears on menu display may differ  
from the order on computer display.  
Sometimes, during fast forward/rewind of VBR recorded MP3,  
the counter may not display correctly.  
This unit is compatible with multi-session but if there are a lot of  
sessions it takes more time for play to start. Keep the number of  
sessions to a minimum to avoid this.  
This unit cannot play files recorded using packet write.  
If the disc includes both MP3 and other types of audio data (e.g.  
WMA or WAV), the unit plays only the MP3.  
If the disc includes both MP3 and normal audio data (CD-DA),  
the unit plays the type recorded in the inner part of the disc.  
Depending on how you create MP3 files, they may not play in the  
order you numbered them or may not play at all.  
If you play a MP3 track that includes still picture data, it will take  
some time before the music itself starts playing and the elapsed  
time will not be displayed during this time. Even after the track  
starts, the correct play time will not be displayed.  
Maximum number of tracks and groups recognizable: 999 tracks  
and 99 groups  
Compatible compression rate: between 32 kbps and 320 kbps  
Download from Www.Somanuals.co1m8. All Manuals Search And Download.  
Recording television programmes  
[RAM] [DVD-R]  
Preparation  
ªRe-inserting double-sided discs  
Switch [DVD, TV] (15) to “DVD”.  
1
2
Press [DVD, Í] (1) to turn the unit on.  
Press [<, OPEN/CLOSE] (27) to open the tray and  
insert a disc.  
Reverse  
3
Insert one disc only within the tray’s guides.  
Use a disc that can be recorded on and that has enough  
space available.  
Press [<, OPEN/CLOSE] (27) to close the tray.  
When using a DVD-RAM for the first time with this unit,  
format it to ensure accurate recording (page 31, “Format”).  
Check the disc carefully to ensure it doesn’t contain  
programmes you want to keep.  
Front  
Turn over  
1
2
You can get up to 12 hours recording when you use double-sided  
discs and use the “EP” mode.  
ªRecording modes and approximate recording times  
in hours  
(2)  
DVD-RAM  
DVD-R  
Single-sided Double-sided  
(4.7 GB)  
(4.7 GB)  
(9.4 GB)  
XP (High quality)  
SP (Normal)  
1
2
4
6
2
4
1
2
4
6
(1)  
e.g.: DVD-RAM  
(1) Arrow pointing inwards.  
(2) Align correctly.  
LP (Long play)  
EP (Extra long play)  
8
12  
Insert label-up with the arrow facing in. (with double-sided  
discs, load so the label for the side you want to record is  
facing up.)  
Flexible recording (FR) calculates a recording rate that will  
enable the recording to fit in the remaining time on the disc.  
3
4
Press [W, X, CH] (18) or numeric buttons (4) to  
select the channel.  
When using DVD-R  
You can play DVD-R on compatible DVD players by finalizing  
them on this unit, effectively making them into DVD-Video.  
The video is recorded in a 4:3 aspect irrespective of the video  
signal input.  
When recording bilingual channel sound onto DVD-R, it is  
possible to select only one of “M1” or “M2”.  
(3)  
(3) e.g.: When you have selected channel 4  
Press [REC MODE] (17) to select the recording  
mode.  
Select “XP”, “SP”, “LP” or “EP”.  
It is also possible to perform the flexible recording (FR).  
(page 20)  
When recording bilingual TV broadcast while receiving a  
bilingual TV broadcast  
Select “M1”(main) or “M2”(secondary audio) of “Bilingual Audio  
Selection” in the “Sound” menu.  
(4)  
When recording bilingual audio with connecting to a decoder  
or a digital receiver  
Select the audio type either “M1” or “M2” on the connected  
devices. (You cannot select the audio type on this unit.)  
(4) e.g.: When you have selected “XP”  
5
Press [¥, REC] (16) to start recording.  
The programme which has already been recorded is not  
overwritten.  
For your reference  
[RAM]  
Select the audio type both “M1” and “M2” on the connected  
devices. (You can also select the audio type on this unit.)  
Note  
[DVD-R]  
You cannot use [AUDIO] (31) or the DISPLAY menu to change  
audio type when a DVD-R is in the disc tray.  
To ensure recording  
Use a disc that can be recorded on and that has enough space  
available.  
Ensure the write protect tab is not set to “PROTECT”. (page 64)  
Ensure the disc is not write-protected with DISC INFORMATION.  
ªTo pause recording  
Press [;] (8).  
Press again to restart recording.  
ªTo stop recording  
Press [] (7).  
ªTo select channels with the remote control  
Press the numeric buttons (4).  
ªConvenient features  
Chasing play—playing from the beginning of the programme you  
are recording (page 21).  
Simultaneous recording and play—watching a programme you  
recorded while recording another (page 21).  
Time Slip-checking the images you are recording (page 22).  
Download from Www.Somanuals.co1m9. All Manuals Search And Download.  
Recording television programmes (continued)  
ªTo check the remaining time and the current mode  
during recording  
Press [STATUS] (28) several times.  
One Touch Recording—Specify a time to  
stop recording  
[RAM] [DVD-R]  
(1)  
Main unit only  
DVD-RAM  
0:07:21 6.8.  
π Remain  
0:50 XP  
This is a simple way of making timer recordings when you are in a  
hurry or before you go to bed. You can set the time up to 4 hours in  
advance.  
π PRG2 0:05.14 XP  
REC  
PLAY  
π PRG1 0:00.10 SP  
LR  
(1) Available recording time and recording mode  
(e.g.: “0:50 XP” indicates 50 minutes in XP mode)  
While recording  
Press [¥, REC] (16) on the main unit to select the  
recording time.  
The time increases as illustrated each time you press the button.  
The counter decreases in 1-minute units after you set a time. You  
can change the time again with the same operation.  
When the time you set is reached, recording stops and the unit  
switches to standby.  
Notes  
The message “Cannot record. Maximum number of  
programmes recorded.is displayed if you try to start recording  
when there are already 99 programmes on a disc. Erase  
unneeded programmes (DVD-RAM/DVD-R) or use a new disc to  
continue recording.  
Unit’s Display  
(Counter) # 30 # 60 # 90  
^ 240 ! 180 ! 120 !}  
Check that disc can be recorded on (page 8).  
For your reference  
You can record up to 99 programmes on one disc.  
You cannot change the channel or recording mode during  
recording. You can change them while recording is paused, but  
the material is recorded as a separate programme.  
An error message appears if you try to start recording when a  
disc is full; the remaining time will be shown as “0:00”. To  
continue recording, erase unneeded programmes (DVD-RAM  
only (page 34), Erasing programmes) or use another disc.  
There are limitations when recording to DVD-R (page 9).  
The message “Can not record on the disc.” is displayed when  
recording was not completed correctly. Check the discs for dirt or  
scratches.  
(2)  
(2) Shows recording will stop in 30 minutes  
ªTo cancel  
During recording, press [¥, REC] (16) until the counter appears.  
Recording continues.  
ªTo show the time remaining until recording finishes  
Press [STATUS] (28) several times.  
Recording cannot be performed correctly if you try to record PAL  
system to a disc that already contains recordings using NTSC.  
DVD-RAM  
REC/OTR 30  
ARD  
Flexible recording mode (FR)  
[RAM] [DVD-R]  
LR  
The unit calculates a recording rate that enables the recording to fit  
in the time you set (within the remaining time on the disc) and with  
the best possible picture quality.  
For your reference  
This does not work during timer recordings or while using flexible  
recording.  
You cannot use the remote control to specify a time for recording  
to stop.  
1
While stopped  
Press [F Rec] (26).  
FLEXIBLE RECORDING  
Recording in FR mode  
Recording stops and the set time is cleared if you press [] (7).  
The set time is cleared if you change the recording mode or  
channel while recording is paused.  
Maximum rec. time 1 Hour 23 Min.  
Set rec. time  
1 Hour 23 Min.  
Start  
Cancel  
SELECT  
RETURN  
ENTER  
2
3
Press [3, 4, 2, 1] (10) to set the recording time.  
To start recording  
Press [3, 4, 2, 1] (10) to select “Start” and press  
[ENTER] (10).  
Recording starts.  
For your reference  
Press [STATUS] (28) during recording to show the remaining  
time.  
DVD-RAM  
REC 83  
ARD  
LR  
It is not possible to change channel or recording mode while  
flexible recording is paused.  
Recording time reduces if you repeatedly pause recording.  
Download from Www.Somanuals.co2m0. All Manuals Search And Download.  
Playing while you are recording  
Playing from the beginning of the  
programme you are recording—Chasing  
play  
[RAM]  
Simultaneous recording and play  
[RAM]  
You can start play of the programme you are recording or play a  
programme previously recorded.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
You can start play from the beginning of a programme while  
continuing to record it.  
During recording or timer recording  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
1
2
Press [DIRECT NAVIGATOR] (9).  
µ” is displayed in the direct navigator to indicate the  
programme is being recorded (page 33).  
Use [3, 4] (10) to select a programme and press  
[ENTER] (10).  
While recording or timer recording  
Press [1] (21).  
Play starts from the beginning of the programme being recorded.  
(1)  
(1)  
DIRECT NAVIGATOR  
No. Name  
Date  
Time  
Title  
Edit  
1
1
1
1
1
3
01  
02  
4
6
10:00 Dinosaur  
9:00 Football  
20/7 WED  
20/7 WED  
(2)  
¥
(2)  
(4)  
3
SELECT  
TOTAL  
2
No.  
0
9
ENTER  
RETURN  
(3)  
(3)  
DIRECT NAVIGATOR  
No. Name  
Date  
Time  
Title  
Edit  
1
1
1
1
1
3
01  
02  
4
6
10:00 Dinosaur  
9:00 Football  
20/7 WED  
20/7 WED  
(4)  
¥
3
SELECT  
TOTAL  
2
No.  
0
9
ENTER  
RETURN  
(1) For example: while recording programme 2 (sport)  
(2) You want to watch the sports programme currently recording  
(programme 2)  
(3) Do the above operation (press [1] (21)) and...  
(4) The same sports programme is recorded while you are  
watching it.  
(1) For example: while recording programme 2 (sport)  
(2) You want to watch the movie you recorded yesterday  
(programme 1)  
(3) Do the above operation and...  
(4) A sports programme is recorded while you watch a movie.  
ªTo stop play and recording  
1) Press [] (7). Play stops.  
2) (Wait 2 or more seconds)  
ªTo stop play and recording  
1) Press [] (7). Play stops.  
2) (Wait 2 or more seconds)  
Press [] (7). Recording stops.  
You cannot stop recording with [] (7) during timer  
recording. To stop timer recording, press [ , TIMER] (12).  
Press [] (7). Recording stops.  
You cannot stop recording with [] (7) during timer  
recording. To stop timer recording, press [ , TIMER] (12).  
For your reference  
During simultaneous recording and play, you cannot edit with the  
direct navigator or play lists.  
For your reference  
The playback images are displayed during chasing play.  
Sound is not output while fast-forwarding.  
Play cannot be started until at least 2 seconds after recording  
starts.  
If you fast-forward and get to within a few seconds of the part  
being recorded, the picture will change to show the images  
currently being played.  
The operation is shown on the unit’s display (page 5).  
If you fast-forward and get to within a few seconds of the part  
being recorded, the unit automatically switches to play and  
shows the images about 5 seconds before. You cannot get any  
closer than this.  
If you start play while the unit is on standby for timer recording,  
recording starts when the time you set is reached.  
The unit returns to recording standby when you stop play while it  
is on standby for timer recording.  
The operation is shown on the unit’s display (page 5).  
Sound is not output while fast-forwarding.  
While this function is activated, TIME SLIP indicator (41) lights  
up.  
While this function is activated, TIME SLIP indicator (41) lights  
up.  
Download from Www.Somanuals.co2m1. All Manuals Search And Download.  
Playing while you are recording (continued)  
Using the FUNCTIONS window  
Checking the recording during recording  
(TIME SLIP)  
[RAM]  
About the FUNCTIONS window  
Most of the features and functions of this unit can also be  
controlled with icons. The examples show the FUNCTIONS  
window when a DVD-RAM is being used. Actual menus depend on  
the type of disc being used.  
You can play the programme being recorded to check that it is  
being recorded correctly. You can also check parts that were  
recorded previously.  
Disc display  
(1)  
(2)  
(3)  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
DVD-RAM  
Disc Protection Off  
FUNCTIONS  
Cartridge Protection Off  
While recording or timer recording  
Press [TIME SLIP] (25).  
Play starts 30 seconds previous.  
S
S
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST  
PLAY  
0 min  
(1)  
SELECT  
TIMER RECORDING  
SETUP  
PLAY LIST  
PLAY  
ENTER  
RETURN  
REC  
TOP PLAY  
FLEXIBLE REC  
(1) Disc title  
(2)  
The disc’s title is displayed if one is recorded. You can enter  
titles with Enter Title in DISC INFORMATION (page 29).  
(2) Disc protection  
“On” is displayed if you have used Disc Protection in DISC  
INFORMATION to protect the disc (page 30).  
(3) Cartridge Protection  
(1) Play images (30 seconds before)  
(2) Current recording  
ªTo change the part being played  
Press [3, 4] (10) to enter the time.  
Press [3] (10) to increase or [4] (10) to decrease in one-minute  
units. Press and hold [3] (10) to increase or [4] (10) to  
decrease in 10-minute units.  
“On” is displayed if the cartridge’s write protect tab is  
switched to “PROTECT” (page 64).  
Using the FUNCTIONS window  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
PLAY  
–5 min  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
REC  
1
While stopped  
Press [FUNCTIONS] (11) to show the FUNCTIONS  
window.  
DVD-RAM  
Disc Protection Off  
FUNCTIONS  
ªTo show the play images in full  
Press [TIME SLIP] (25).  
Cartridge Protection Off  
S
S
Press [TIME SLIP] (25) to return to the picture-in-picture screen.  
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST  
ªTo stop play and recording  
1) Press [] (7). Play stops.  
2) (Wait 2 or more seconds)  
SELECT  
ENTER  
TIMER RECORDING  
SETUP  
PLAY  
PLAY LIST  
RETURN  
TOP PLAY  
FLEXIBLE REC  
Press [] (7). Recording stops.  
You cannot stop recording with [] (7) during timer  
recording. To stop timer recording, press [ , TIMER] (12).  
2
3
Use [3, 4, 2, 1] (10) to select an item.  
Refer to the relevant pages for details.  
Press [ENTER] (10).  
For your reference  
Your selection is entered and the FUNCTIONS window  
disappears. If the operation requires further selections,  
another screen appears.  
The sound for the images being played is heard during Time Slip.  
While this function is activated, TIME SLIP indicator (41) lights  
up.  
The image on the small screen may be distorted or flicker  
depending on the scene. However, this does not affect the image  
recorded.  
ªTo clear the FUNCTIONS window  
Press [FUNCTIONS] (11) or [RETURN] (23).  
Watching the television while recording  
Preparation  
Switch [DVD, TV] (15) to “TV”.  
1
2
Press [AV] (3) to change the input mode to “TV”.  
Press [W, X, CH] (18) to change channels.  
You can also select the channel with the numeric buttons (4).  
For your reference  
You can also do this if the unit is making a timer recording.  
The recording is unaffected.  
Download from Www.Somanuals.co2m2. All Manuals Search And Download.  
Using the FUNCTIONS window (continued)  
CREATE PLAY LIST  
ªFUNCTIONS window icons  
DISC INFORMATION  
CREATE PLAY LIST  
DISC INFORMATION  
Creating play lists:  
[RAM] (page 38)  
Enter Title:  
[RAM] [DVD-R] (page 29)  
PLAY LIST  
Disc Protection:  
Erase all programmes:  
Format:  
[RAM] (page 30)  
[RAM] (page 31)  
[RAM] (page 31)  
[DVD-R] (page 32)  
Finalize:  
PLAY LIST  
Playing Play Lists:  
Play Scenes:  
Edit:  
PL Copy:  
PL Erase:  
[RAM] (page 39)  
[RAM] (page 39)  
[RAM] (pages 40 and 41)  
[RAM] (page 42)  
[RAM] (page 42)  
[RAM] (page 42)  
[RAM] (page 42)  
TIMER RECORDING  
TIMER RECORDING  
Enter Title:  
Properties:  
Checking the timer programming:[RAM] [DVD-R] (page 27)  
Registering programmes and making corrections:  
[RAM] [DVD-R] (page 26)  
FLEXIBLE REC  
Cancelling timer recordings:  
[RAM] [DVD-R] (page 27)  
SETUP  
FLEXIBLE REC  
Flexible recording mode:  
[RAM] [DVD-R] (page 20)  
SETUP  
TOP MENU  
MENU  
Settings for the unit and discs:  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
[MP3] Settings depend on the  
type of disc (page 51)  
TOP MENU  
Example  
Display a disc’s menus:  
DIRECT NAVIGATOR  
[DVD-V] (page 13)  
S
DIRECT NAVIGATOR  
Some items will not be shown unless you release disc protection  
with DISC INFORMATIONDisc Protection” (page 30) or  
release cartridge protection with the write protect tab (page 64).  
Play:  
Erase:  
[RAM] [DVD-R] (page 33)  
[RAM] [DVD-R] (page 34)  
[RAM] [DVD-R] (page 34)  
[RAM] [DVD-R] (page 34)  
[RAM] (page 35)  
Enter Title:  
Properties:  
Protection:  
Partial Erase:  
Divide:  
[RAM] (page 36)  
[RAM] (page 36)  
PLAY  
PLAY  
Disc play:  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
[MP3] (page 13)  
RESUME PLAY  
RESUME PLAY  
Start play from the point you stopped play:  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
[MP3] (page 14)  
TOP PLAY  
TOP PLAY  
Start play from the oldest programme on the disc:  
[RAM] [DVD-R] [DVD-V] [CD] [VCD]  
[MP3] (page 13)  
Download from Www.Somanuals.co2m3. All Manuals Search And Download.  
Timer recording  
4
If the programme is correct  
Press [ENTER] (10).  
The Timer Programme List screen appears.  
Using G-CODE number to make timer  
recording  
[RAM] [DVD-R]  
TIMER  
RECORDING  
Remain 1:58 SP  
1:19:00 12.7 TUE  
Disc  
Remote control only  
No. Name  
01 64 ABC 12/ 7 TUE  
Date  
Start  
1:19  
Stop  
1:22  
Mode  
space  
SP OK  
New Timer Programme  
You can easily programme the unit to make a timer recording of a  
programme by entering the programme’s G-CODE number, which  
can be found in the television sections of newspapers or in  
television guides. You can programme up to 16 programmes one  
month in advance. Programmes for everyday or every week are  
counted as one programme.  
SELECT  
ENTER  
CANCEL  
RETURN  
5
Press [RETURN] (23).  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Ensure that this unit’s clock is set correctly.  
Insert a disc for recording (make sure there is enough room for  
the programme you are going to record plus a little extra).  
ªTo put the unit on recording standby  
Press [ , TIMER] (12).  
Ensure “ ” lights on the unit’s display.  
1
Press [G-Code] (2) button.  
G-Code  
Remain 0:59 SP  
12:53:00 12.7 TUE  
Enter G-Code Number by using 0-9 key.  
No.  
--  
RETURN  
0
9
2
Press the numeric buttons (4) to enter the G-CODE  
number.  
G-Code  
Remain 0:59 SP  
12:53:00 12.7 TUE  
1
1
1
1
1
1
1
1
1
If you enter the wrong digit, use [2] (10) to move back and  
enter the correct digit.  
3
Press [ENTER] (10).  
The Timer Programme Correction screen which allows you to  
confirm the programme appears and make corrections if  
necessary.  
TIMER  
RECORDING  
Remain 1:58 SP  
12:53:00 12.7 TUE  
Name  
Date  
Start  
1:00  
Stop  
2:00  
Mode  
SP  
64 ABC 12/ 7 TUE  
Title  
Press ENTER to store new programme.  
SELECT  
ENTER  
No.  
--  
CANCEL  
0
9
RETURN  
Check the programme.  
To make corrections (page 25).  
To programme other recordings, repeat steps 1, 2 and 3.  
Download from Www.Somanuals.co2m4. All Manuals Search And Download.  
Timer recording (continued)  
Notes  
ªTo change the programme  
The built-in clock employs 24-hour system.  
TIMER  
Remain 1:58 SP  
RECORDING  
1:19:00 12.7 TUE  
The actual time recorded may be longer than the programme  
itself when television programmes are recorded using G-CODE.  
“Invalid Entry” is displayed when you enter the wrong code.  
Reenter the code.  
Name  
Date  
Start  
1:00  
Stop  
2:00  
Mode  
SP  
64 ABC 12/ 7 TUE  
Title  
“PROG FULLis displayed in the unit’s display if there are already  
16 items programmed. Delete unnecessary items (page 27).  
The remaining time displayed is calculated based on the current  
recording mode.  
Press ENTER to store new programme.  
SELECT  
ENTER  
No.  
CANCEL  
0
9
RETURN  
--  
Timer Programme Correction screen (After step 3 on page 24)  
1) Use [2, 1] (10) to select the item you want to change.  
2) Change the setting with [3, 4] (10).  
You may use the numeric buttons (4) to enter “Name”,  
“Date”, “Start” and “Stop”.  
When recording more than one programme in a row, for DVD-  
RAM the first few seconds, and for DVD-R about the first 30  
seconds of all programmes from the second one onwards will not  
be recorded.  
Recording is not possible unless you set “Disc Protection” in  
“DISC INFORMATION” to “Off”. (page 30)  
The items change as follows:  
Name (Programme Position/TV Station Name)  
Date  
Current date>the day before one month later>  
Daily (Sunday to Saturday)>Daily (Monday to Saturday)>  
Daily (Monday to Friday)>Weekly (Sundays)>...>  
Weekly (Saturdays)  
You can not record to a disc if the write protect tab on a cartridge  
disc is set to protect. Release this before operation (page 64).  
Even if the unit is put in the timer recording standby mode or the  
timer recording is being performed, you can play a programme.  
Start (start time)/Stop (finish time)  
The time increases or decreases in 30-minute increments if  
you hold the button.  
Mode (Recording mode)  
XP>SP>LP>EP>FR (page 19)  
Title  
Select “Title” and press [ENTER] (10), then refer to page 29  
for entering title.  
You can give DVD-RAM and DVD-R titles of up to 44  
characters.  
3) Press [ENTER] (10) when you have finished making changes.  
The Timer Programme List screen appears.  
ªIf “– –” appears under “Name” after entering a  
G-CODE number  
Name stands for Programme Position/TV Station Name.  
Normally, the name of the TV station or the number of the  
programme position is displayed under “Name”.  
However, if the TV station information was not automatically set  
during Auto Setup due to adverse reception conditions, the “– –”  
indication appears instead.  
In such a case, follow the operation steps below to correct it.  
Use [3, 4] (10) repeatedly to select the programme  
position on which the TV programme to be recorded  
will be broadcast.  
After you have entered the information of a TV station, it remains  
stored in the unit’s memory, and you do not need to enter it again  
in the future.  
Download from Www.Somanuals.co2m5. All Manuals Search And Download.  
Timer recording (continued)  
To put the unit on recording standby  
Press [ , TIMER] (12).  
Ensure “ ” lights on the unit’s display.  
Manual programming  
[RAM] [DVD-R]  
Remote control only  
To change the timer recording programme  
1) While the Timer Programme List Screen is being shown, use  
[3, 4] (10) to select the programme you want to change, and  
press [ENTER] (10) to show the Timer Programme Correction  
screen.  
You can set your own programming conditions (up to 16  
programmes).  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Ensure that this unit’s clock is set correctly.  
Insert a disc for recording (make sure there is enough room for  
the programme you are going to record plus a little extra).  
You may also select programme by inputting a 2-digit number  
using the numeric buttons (4).  
Use [2, 1] (10) to move to the page preceding or following  
the one on display.  
1
Press [PROG/CHECK] (13).  
The Timer Programme List screen appears.  
2) Move through the items with [1] (10) and change the settings  
with [3, 4] (10) and press [ENTER] (10).  
TIMER  
Remain 1:58 SP  
RECORDING  
1:19:00 12.7 TUE  
Disc  
Mode  
space  
SP OK  
No. Name  
01 64 ABC 12/ 7 TUE  
Date  
Start  
1:19  
Stop  
1:22  
Notes  
New Timer Programme  
The built-in clock employs 24-hour system.  
The remaining time is not shown if you insert discs other than  
DVD-RAM or DVD-R.  
The remaining time displayed is calculated based on the current  
recording mode.  
SELECT  
ENTER  
Press ENTER to store  
new programme.  
RETURN  
If the disc is protected (pages 30 and 64), the unit switches to  
standby but does not go on standby for recording. Check the disc  
carefully.  
Recording is not possible unless you set “Disc Protection” in  
“DISC INFORMATION” to “Off”. (page 30)  
A line that is ready for programming is highlighted.  
Press [ENTER] (10).  
The Timer Programme Correction screen appears.  
2
TIMER  
You cannot record to a disc if the write protect tab on a cartridge  
disc is set to protect. Release this before operation (page 64).  
Even if the unit is put in the timer recording standby mode or the  
timer recording is being performed, you can play a programme.  
When recording more than one programme in a row, for  
DVD-RAM the first few seconds, and for DVD-R about the first  
30 seconds of all programmes from the second one onwards will  
not be recorded.  
Remain 1:58 SP  
RECORDING  
1:55:00 12.7 TUE  
Date  
/
Start  
:
Stop  
:
Name  
Mode  
SP  
Title  
Please set Channel.  
No.  
SELECT  
ENTER  
RETURN  
0
9
--  
3
Use [1] (10) to move through the items and change  
the items with [3, 4] (10).  
The current settings are shown each time you press [1]  
(10).  
You may use the numeric buttons (4) to enter “Name”,  
“Date”, “Start” and “Stop”.  
TIMER  
RECORDING  
Remain 1:58 SP  
1:19:00 12.7 TUE  
Date  
Name  
64 ABC 12/ 7 TUE  
Start  
1:00  
Stop  
2:00  
Mode  
SP  
Title  
Name (Programme Position/TV Station Name)  
Date  
Current date>the day before one month later>  
Daily (Sunday to Saturday)>Daily (Monday to Saturday)>  
Daily (Monday to Friday)>Weekly (Sundays)>...>  
Weekly (Saturdays)  
Start (start time)/Stop (finish time)  
The time increases or decreases in 30-minute increments if  
you hold the button.  
Mode (Recording mode)  
XP>SP>LP>EP>FR (page 19)  
Title  
Select “Title” and press [ENTER] (10), then refer to page 29  
for entering title.  
4
5
Press [ENTER] (10) when you have finished making  
changes.  
To continue programming:  
Repeat steps 2, 3 and 4.  
Press [PROG/CHECK] (13) or [RETURN] (23).  
Download from Www.Somanuals.co2m6. All Manuals Search And Download.  
Timer recording (continued)  
To check programmes  
[RAM] [DVD-R]  
Starting and canceling programmes  
[RAM] [DVD-R]  
Press [PROG/CHECK] (13).  
ªTo put the unit on recording standby  
The Timer Programme List screen appears.  
Press [ , TIMER] (12).  
The unit turns off and “ ” lights on the unit’s display.  
TIMER  
Remain 1:58 SP  
RECORDING  
1:19:00 12.7 TUE  
Disc  
Note  
No. Name  
Date  
Start  
1:19  
1:20  
8:00  
9:00  
Stop  
1:22  
Mode  
space  
01 64 ABC 12/ 7 TUE  
02 64 ABC 12/ 7 TUE  
03 64 ABC 20/ 7 WED  
04 64 ABC 20/ 7 WED  
SP OK  
SP  
The unit cannot go to timer recording standby if the disc is  
W
F
2:20  
OK  
A
protected (pages 30 and 64) or full (“ ” flashes). Check the disc  
carefully.  
9:00  
10:00  
11:00  
SP OK  
SP OK  
SP OK  
X
05 64 ABC 20/ 7 WED 10:00  
New Timer Programme  
ªTo release the unit from recording standby  
If you want to record something else before the programme start  
time, for example:  
SELECT  
ENTER  
CANCEL  
RETURN  
Press [ , TIMER] (12).  
The unit turns on and “ ” goes out.  
Icon explanations (A)  
¥
W
F
This programme is currently recording.  
Be sure to press [ , TIMER] (12) before the programme start  
time to put the unit on recording standby. The programme only  
The programme is overlap with another programme.  
The disc was full or the maximum number of programmes or  
scenes was reached so the programme failed to record.  
works if “ ” is on.  
ªTo stop recording while a programme is working  
Press [ , TIMER] (12).  
The television programme was copy-guarded so the  
programme failed to record.  
TV system of the programme is different from the setting in  
SETUP, so the programme failed to record.  
The programme did not complete recording because the  
disc is dirty or some other reason.  
To clear a timer recording programme  
[RAM] [DVD-R]  
X
Press [CANCEL] (5) or [ERASE] (30) while the  
programme’s Timer Programme Correction screen is  
being shown.  
Disc space  
OK:  
Displayed if the recording can fit in the remaining  
space on the disc.  
(Alternatively, use [3, 4] (10) to select the programme  
in the Timer Programme List screen and press  
[CANCEL] (5) or [ERASE] (30).)  
# (Date):  
For recordings made daily or weekly, the display  
will show until when recordings can be made  
based on the time remaining on the disc.  
Displayed if the disc is not inserted in the unit or is  
write-protected (pages 30 and 64) or there is not  
enough memory capacity left on the disc.  
!:  
You can not delete programmes that are currently recording.  
ªTo change the programme  
(page 26)  
ªTo exit from the Timer Programme List screen  
Press [PROG/CHECK] (13) or [RETURN] (23). (The television is  
shown.)  
For your reference  
Programmes that failed to record are deleted from the list at 4  
a.m. the day after tomorrow.  
Download from Www.Somanuals.co2m7. All Manuals Search And Download.  
Recording from a video cassette player  
When connected to the other equipment  
[RAM] [DVD-R]  
You can record audio and video being played on a video cassette player or a video camera connected to the input terminals.  
Preparation  
Before connecting any cables, first make sure that the power for both units is off.  
Then after connecting any cable, turn on the both units.  
Connect the other equipment to this unit’s input terminals (page 49).  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc that can be recorded on.  
Select the recording mode, XP, SP, LP or EP (page 19).  
It is also possible to perform the flexible recording (FR) (page 20).  
1
While stopped  
Press [W, X, CH] (18) or [INPUT SELECT] (29) to select the input channel for the equipment you have connected.  
Select AV1, AV2 or AV3.  
2
3
Start play on the other equipment.  
Press [¥, REC] (16) at the point you want to start recording.  
ªTo skip unwanted parts  
Press [;] (8) to pause recording.  
Press again to restart recording.  
ªTo stop recording  
Press [] (7).  
Note  
Stop play on the other equipment as well.  
For your reference  
Poor video quality or colouring may indicate that the material you are recording has copy protection.  
Select the TV system (PAL/NTSC) of the programme you wish to record (page 53).  
Any software that has been so treated cannot be recorded using this unit.  
Download from Www.Somanuals.co2m8. All Manuals Search And Download.  
Entering titles  
DISC INFORMATION  
[RAM] [DVD-R]  
About DISC INFORMATION  
[RAM] [DVD-R]  
You can:  
Title discs with the DISC INFORMATION in the FUNCTIONS  
window.  
Title programmes with the Timer recording (page 25).  
Title programmes with the DIRECT NAVIGATOR (page 34).  
Title play lists with the PLAY LIST screen (page 42).  
You can give discs titlesEnter Title  
You can write-protect and write-enable DVD-RAMDisc  
Protection  
You can erase all programmes and play lists on DVD-RAM—  
Erase all programmes  
You can format DVD-RAMFormat  
You can finalize DVD-R so they can be played on compatible  
DVD playersFinalize  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc with something recorded on it.  
Select Titling “DISC INFORMATION”, Titling “Timer recording”,  
Titling “DIRECT NAVIGATOR”, or Titling “PLAY LIST” screen.  
Enter Title  
[RAM] [DVD-R]  
1
After the titling screen appears  
Each disc can be given a different title.  
Use [3, 4, 2, 1] (10) to select the character you  
want to enter and press [ENTER] (10).  
You can enter the following characters.  
Enter Title  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
(1)  
_
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
£
%
&
@
_
)
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “DISC  
INFORMATION” and press [ENTER] (10).  
3
4
5
d
g
j
(2)  
(3)  
h
k
i
O
[
L
O
R
V
Y
?
l
N
]
ERASE  
SET  
m
n
o
6
7
8
M
P
S
p
t
q
u
x
'
r
s
{
(
-/--  
0
T
v
}
-
SELECT  
9
0
W
Z
!
w
"
y
:
z
;
\
|
~
.
,
^
ENTER  
-/--  
SPACE  
RETURN  
DISC INFORMATION  
(4)  
3
4
Use [3, 4] (10) to select “Enter Title” and press  
[ENTER] (10).  
(1) This window shows the text you have entered (Title field)  
(2) ERASE ([;] (8))  
(3) SET ([] (7)) (when you have finished entering text)  
(4) SPACE  
DISC  
INFORMATION  
Prog No 7  
Used 0 : 58 Markers  
Free  
0 : 42 (SP)  
10  
Enter Title  
To enter other characters  
Disc Protection  
Erase all programmes  
Off  
Repeat step 1.  
SELECT  
Format  
2
Press [] (7). (You can also finish entering the title  
by using [3, 4, 2, 1] (10) to select “SET” and  
pressing [ENTER] (10).)  
ENTER  
RETURN  
Enter the title.  
Enter Title  
_
The title is entered and the screen disappears.  
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
£
%
&
@
_
)
ªTo stop partway through  
Press [RETURN] (23) (does not save any title information).  
3
4
5
d
g
j
h
k
i
O
[
L
O
R
V
Y
?
l
N
]
ERASE  
SET  
m
n
o
6
7
8
M
P
ªUsing the numeric buttons (4) to enter characters  
e.g., entering the letter “R”  
S
p
t
q
u
x
'
r
s
{
(
-/--  
0
5
T
v
}
-
J
K
N
Q
U
L
O
R
V
SELECT  
9
0
W
Z
!
w
"
y
:
z
;
\
|
~
7
7
.
,
^
1) Press [7] (4) to move to the 7th row.  
2) Press [7] (4) twice to highlight “R”.  
3) Press [ENTER] (10).  
You may enter a space by pressing [-/--]  
(4) and then [ENTER] (10).  
6 M  
ENTER  
-/--  
SPACE  
7
RETURN  
7
8
P
T
S
Notes  
You can give DVD-RAM titles of up to 64 characters and DVD-R  
titles of up to 40 characters.  
You cannot give DVD-R titles once they have been finalized.  
ªTo correct a character  
1) Use [3, 4, 2, 1] (10) to select the character you want to  
correct in the title field.  
2) Press [;] (8). (You can also erase characters by using  
[3, 4, 2, 1] (10) to select “ERASE” and pressing  
[ENTER] (10).)  
3) Use [3, 4, 2, 1] (10) to select the correct character and  
press [ENTER] (10).  
Notes  
You cannot enter titles if the programme is protected. Release  
the protection with the direct navigator (page 35).  
You cannot enter titles unless the “Disc Protection” in DISC  
INFORMATION is “Off” (page 30).  
You cannot enter titles if the disc is protected with the write  
protect tab (page 64).  
If you enter a long title, only part of it is shown in the programme  
list (page 33) and play list screen (page 37).  
Download from Www.Somanuals.co2m9. All Manuals Search And Download.  
DISC INFORMATION (continued)  
Disc Protection  
[RAM]  
Releasing disc protection  
[RAM]  
This allows you to protect discs from accidental erasure.  
This allows you to release disc protection.  
Preparation  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Insert the disc you want to protect.  
Switch [DVD, TV] (15) to “DVD”.  
Insert the disc you want to release protection.  
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “DISC  
INFORMATION” and press [ENTER] (10).  
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “DISC  
INFORMATION” and press [ENTER] (10).  
DISC INFORMATION  
DISC INFORMATION  
3
4
Use [3, 4] (10) to select “Disc Protection” and  
press [ENTER] (10).  
3
4
Use [3, 4] (10) to select “Disc Protection” and  
press [ENTER] (10).  
DISC  
DISC  
Prog No 7  
Used 0 : 58 Markers  
Free  
0 : 42 (SP)  
10  
Prog No 7  
Used 0 : 58 Markers  
Free  
0 : 42 (SP)  
10  
INFORMATION  
INFORMATION  
Enter Title  
Enter Title  
Disc Protection  
Off  
Disc Protection  
Erase all programmes  
On  
Erase all programmes  
Format  
SELECT  
SELECT  
Format  
ENTER  
ENTER  
RETURN  
RETURN  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
Disc Protection  
Disc Protection  
Set up Disc Protection ?  
Cancel Disc Protection ?  
Yes  
No  
Yes  
No  
DISC  
DISC  
Prog No 7  
Free  
0 : 42 (SP)  
10  
Prog No 7  
Free  
0 : 42 (SP)  
10  
INFORMATION  
INFORMATION  
Used  
0 : 58 Markers  
Used  
0 : 58 Markers  
Enter Title  
Enter Title  
Disc Protection  
On  
Disc Protection  
Off  
Erase all programmes  
Format  
Erase all programmes  
Format  
SELECT  
SELECT  
ENTER  
ENTER  
RETURN  
RETURN  
ªTo stop partway through  
Select “No” in step 4 and press [ENTER] (10).  
Or  
ªTo stop partway through  
Select “No” in step 4 and press [ENTER] (10).  
Or  
Press [RETURN] (23).  
Press [RETURN] (23).  
Download from Www.Somanuals.co3m0. All Manuals Search And Download.  
DISC INFORMATION (continued)  
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “DISC  
INFORMATION” and press [ENTER] (10).  
Erase all programmes  
[RAM]  
All programmes and play lists created from them will be erased  
irretrievably when you use this procedure.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
DISC INFORMATION  
3
Use [3, 4] (10) to select “Format” and press  
[ENTER] (10).  
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “DISC  
INFORMATION” and press [ENTER] (10).  
DISC  
Prog No 7  
Used 0 : 58 Markers  
Free  
0 : 42 (SP)  
10  
INFORMATION  
Enter Title  
Disc Protection  
Off  
Erase all programmes  
Format  
DISC INFORMATION  
SELECT  
ENTER  
RETURN  
3
Use [3, 4] (10) to select “Erase all programmes”  
and press [ENTER] (10).  
4
5
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
DISC  
Prog No 7  
Used 0 : 58 Markers  
Free  
0 : 42 (SP)  
10  
INFORMATION  
Format Disc  
Enter Title  
Disc Protection  
Off  
Formatting the Disc will erase all contents.  
This will take approximately 1 minute.  
Start formatting the disc ?  
Erase all programmes  
Format  
SELECT  
ENTER  
RETURN  
Yes  
No  
4
5
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
Use [2] (10) to select “Start” and press [ENTER]  
(10).  
Erase all programmes  
Format Disc  
All programmes and Play Lists will  
be erased.  
Is it OK to start erasing all programmes ?  
All contents of this disc will be  
completely erased.  
Start formatting the disc ?  
Yes  
No  
Start  
Cancel  
Use [2] (10) to select “Start” and press [ENTER]  
(10).  
Formatting starts.  
The message “Formatting is complete” appears when  
formatting is finished.  
Erase all programmes  
All programmes and Play Lists will be  
completely erased.  
It is OK to start erasing all programmes ?  
All recordings are irretrievably erased when a disc is formatted.  
Check the disc carefully before formatting to ensure it doesn’t  
contain any programmes you want to keep.  
Start  
Cancel  
ªTo stop formatting  
Select “No” in step 4 or “Cancel” in step 5 and press [ENTER] (10)  
.
All programmes and play lists are erased.  
Or  
Press [RETURN] (23).  
ªTo stop partway through  
Select “No” in step 4 or “Cancel” in step 5 and press [ENTER] (10)  
.
Or  
Notes  
Press [RETURN] (23).  
Do not turn the unit off or disconnect the AC power supply  
cord while the message “Formatting the disc” is on the  
television.  
This can render the disc unusable.  
(This can take up to 70 minutes. You can cancel formatting if it  
takes more than 2 minutes by pressing [RETURN] (23). The disc  
must be reformatted if you do this.)  
All data on the disc is erased when it is formatted, including  
recordings made with this unit. Data written to the disc by a  
computer is also erased.  
Notes  
You cannot erase computer data.  
The disc title will also be erased.  
If protection is active on even one programme (page 35), you  
cannot erase all programmes.  
For your reference  
Nothing will be erased if the disc is write-protected (pages 30 and  
64).  
For your reference  
The disc cannot be formatted if the write protect tab is switched  
to “PROTECT”. Release the protection to continue (page 64).  
Formatting cannot be performed on DVD-R or CD-R/RW.  
The message “Unable to format” appears when you try to  
format discs this unit cannot use.  
If you have used the direct navigator to protect a programme  
(page 35), the message “Contents on the disc have been  
protected. Start formatting the disc?” appears in step 5.  
Select “Start” if you want to format the disc. The contents will be  
erased even if they have been protected.  
Format  
[RAM]  
Some DVD-RAM are unformatted. You must format these discs  
before you can use them in this unit. Formatting also allows you to  
erase the entire contents of a disc.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Insert the disc you want to format.  
Download from Www.Somanuals.co3m1. All Manuals Search And Download.  
DISC INFORMATION (continued)  
FinalizeCreating DVD-Video  
[DVD-R]  
You can play DVD-R on compatible DVD players by finalizing them  
on this unit, effectively making them into DVD-Video.  
The menus you create with this unit can also be used on the  
player.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Insert the disc you want to finalize.  
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “DISC  
INFORMATION” and press [ENTER] (10).  
DISC INFORMATION  
3
Use [3, 4] (10) to select “Finalize” and press  
[ENTER] (10).  
DISC  
Prog No 7  
Used 0 : 58 Markers  
Free  
0 : 42 (SP)  
10  
INFORMATION  
Enter Title  
Finalize  
SELECT  
ENTER  
RETURN  
4
5
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
Finalize  
This will take approximately  
Start finalizing the disc ?  
minutes.  
Yes  
No  
Use [2] (10) to select “Start” and press [ENTER]  
(10).  
Finalize  
Finalize will make this disc playback only.  
Start finalizing the disc ?  
Start  
Cancel  
Finalizing starts.  
The message “Finalizing is finished” appears when finalizing  
is finished.  
ªTo stop finalizing  
Select “No” in step 4 or “Cancel” in step 5 and press [ENTER]  
(10).  
Or  
Press [RETURN] (23).  
Notes  
Do not turn the unit off or disconnect the power supply cord  
while the message “Finalizing the Disc” is on the television.  
This can render the disc unusable.  
You can only finalize DVD-R that were recorded on this unit.  
You cannot record on DVD-R that have been finalized.  
Programmes longer than 5 minutes will be divided into about 5-  
minute chapters.  
The markers you entered (page 17) will be lost.  
Finalizing takes up to about 15 minutes.  
Download from Www.Somanuals.co3m2. All Manuals Search And Download.  
Using the DIRECT NAVIGATOR  
About the programme list  
Selecting programmes to play  
[RAM] [DVD-R]  
DIRECT NAVIGATOR  
DIRECT NAVIATOR  
A list of programmes is created as you record them. You can use  
this list to find the programmes you want to watch.  
i)  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
a)  
No.Name Date  
Time  
Erase  
Enter Title  
Edit  
1
3
b)  
d)  
f)  
01  
02  
4
6
20/7 WED 10:00 Din
1
c)  
e)  
g)  
20/7 WED  
Au
9:00  
Properties  
1
03 13 20/7 WED  
11:00 US
1
Press [DIRECT NAVIGATOR] (9).  
The programme list appears.  
Protection  
1
X
04  
05  
2
8
21/7 THU  
22/7 FRI  
12:00  
21:00  
Fo
Partial Erase  
1
3
¥
Divide  
The images for the currently highlighted list are played in the  
background.  
SELECT  
TOTAL 5  
RETURN  
ENTER  
h)  
DIRECT NAVIGATOR  
a) Programme number, broadcast name, recording date, time  
recording started, programme title (if entered).  
Programme 1 is selected in the example.  
No.Name Date  
Time  
20/7 WED 10:00 Dinosaur  
20/7 WED  
Auto action  
Title  
Edit  
1
1
1
1
3
01  
02  
03  
4
6
9:00  
13 20/7 WED  
11:00 USJ  
3
1
b) Write-protected:  
SELECT  
ENTER  
TOTAL 3  
No.  
0
9
RETURN  
Displayed when you have protected the programme.  
Programme 1 has been protected in the example.  
2
Use [3, 4] (10) to select the programme you want  
to watch and press [ENTER] (10).  
c) Copy-protected/Different TV system (PAL or NTSC):  
Displayed when you have recorded a programme that has  
copy protection, from broadcast.  
DIRECT NAVIGATOR  
Displayed when the programme failed to record so that the  
TV system of the programme is different from the setting in  
SETUP.  
No.Name Date  
Time  
24/7 WED 10:00 Dinosaur  
24/7 WED  
Auto action  
Title  
Edit  
1
1
1
1
3
01  
02  
03  
4
6
For example, when you select  
programme number 2.  
9:00  
d) NTSC: /PAL:  
13 24/7 WED  
11:00 USJ  
Displayed when you recorded using a different encoding  
system from that of the TV system currently selected on the  
unit.  
1
SELECT  
ENTER  
TOTAL 3  
No.  
0
9
RETURN  
e) Unable to play: X  
Displayed if you cannot play the programme.  
f) Currently recording: ¥  
Displayed when the programme is being recorded.  
g) Scroll bar  
Play of the images that were playing in the background  
continues.  
ªTo clear the programme list  
Press [DIRECT NAVIGATOR] (9) or [RETURN] (23).  
If there are more than 6 programmes, you can move down  
the list by using [3, 4] (10) and this bar shows your  
approximate position in the list.  
For your reference  
The direct navigator works while stopped, playing or recording.  
You can also select programmes from the list in step 2 by  
entering a 2-digit number with the numeric buttons (4).  
If you enter a number larger than the total number of  
programmes, the last programme is selected.  
h) Total number of programmes  
Shows the total number of programmes.  
i) Sub menu  
Displayed when you use [1] (10). (You can see this during  
simultaneous recording and play but you are unable to  
perform operations.)  
Titles are only displayed if you have given the programme a title.  
The unit’s clock must be set correctly.  
Erase a programme (page 34).  
Enter or edit a title (page 34).  
Check a programme’s contents (page 34).  
Write-protect a programme (page 35).  
Erase part of a programme (page 36).  
Divide a selected programme into two (page 36).  
For your reference  
The list can show up to 99 programmes that you have recorded.  
When using DVD-R, “Protection”, “Partial Erase” and “Divide” are  
not displayed in the submenu.  
The contents of the list are recorded on the disc.  
[RAM]  
When the disc is protected (pages 30 and 64), you can only  
access “Properties”. Release the protection to access other  
items.  
Download from Www.Somanuals.co3m3. All Manuals Search And Download.  
Using the DIRECT NAVIGATOR (continued)  
Erasing programmes  
Entering and editing programme titles  
[RAM] [DVD-R]  
[RAM] [DVD-R]  
The programme is erased completely when you use this procedure  
and cannot be retrieved. Check the programme carefully before  
erasing it to ensure it isn’t one you want to keep.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
After performing steps 1 to 3 of “Erasing programmes”,  
perform the following steps:  
4
5
Use [3, 4] (10) to select “Enter Title” and press  
[ENTER] (10).  
Enter or edit the title.  
1
2
3
Press [DIRECT NAVIGATOR] (9).  
Use [3, 4] (10) to select the desired programme.  
Use [1] (10) so the submenu appears.  
Enter Title  
_
Erase  
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
£
%
&
@
_
)
Enter Title  
Properties  
Protection  
Partial Erase  
Divide  
3
4
5
d
g
j
h
k
i
O
[
L
O
R
V
Y
?
l
N
]
ERASE  
SET  
m
n
o
6
7
8
M
P
S
p
t
q
u
x
'
r
s
{
(
-/--  
0
T
v
}
-
SELECT  
9
0
W
Z
!
w
"
y
:
z
;
\
|
~
.
,
^
ENTER  
-/--  
SPACE  
RETURN  
4
5
Use [3, 4] (10) to select “Erase” and press  
[ENTER] (10).  
Use [2] (10) to select “Erase”.  
“Entering titles” (page 29)  
For your reference  
Erase Programme  
You can give DVD-RAM titles of up to 64 characters  
- a maximum of 44 characters is possible when inputting a title  
from the timer recording menu.  
Remaining Time  
0 : 58 SP  
Corresponding PLAY LIST will also be erased.  
You can give DVD-R titles of up to 44 characters.  
The full title is shown in the “Properties” screen, but if you enter a  
long title, only part of it is shown in the programme list.  
Erase  
Cancel  
SELECT  
RETURN  
ENTER  
6
Press [ENTER] (10).  
Checking programme contents  
ªTo stop partway through  
Select “Cancel” in step 5 and press [ENTER] (10).  
Or  
[RAM] [DVD-R]  
You can check the contents of a selected programme.  
Press [RETURN] (23).  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
For your reference  
The disc’s available recording time may not increase after  
erasing short programmes.  
Computer data is not erased.  
After performing steps 1 to 3 of “Erasing programmes”,  
perform the following steps:  
The available recording time on DVD-R does not increase when  
you erase programmes.  
4
Use [3, 4] (10) to select “Properties” and press  
[ENTER] (10).  
The contents of the programme are shown.  
Properties  
Football  
No.  
3
On  
1:02  
(
)
Date 12/ 7/2005 TUE Time 0:01 SP  
Name 12  
RETURN  
ENTER  
ªTo return to the previous screen  
Press [RETURN] (23).  
Download from Www.Somanuals.co3m4. All Manuals Search And Download.  
Using the DIRECT NAVIGATOR (continued)  
Protecting programmes  
[RAM]  
Releasing programme protection  
[RAM]  
You can prevent accidental erasure of programmes by write-  
protecting them.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
After performing steps 1 to 3 of “Erasing programmes”,  
perform the following steps:  
After performing steps 1 to 3 of “Erasing programmes”,  
perform the following steps:  
4
5
Use [3, 4] (10) to select “Protection” and press  
[ENTER] (10).  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
4
5
Use [3, 4] (10) to select “Protection” and press  
[ENTER] (10).  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
Protection  
Cancel Programme Protection ?  
Yes  
No  
Protection  
SELECT  
RETURN  
Set Up Programme Protection ?  
ENTER  
Yes  
No  
SELECT  
RETURN  
ENTER  
DIRECT NAVIGATOR  
No.Name Date  
Time  
10:00  
Title  
Edit  
1
3
DIRECT NAVIGATOR  
01  
02  
4
6
20/7 WED  
20/7 WED  
20/7 WED  
Football  
1
9:00 Dinosaur  
11:00 USJ  
1
03 13  
1
3
No.Name Date  
Time  
10:00  
Title  
Edit  
1
1
3
01  
02  
4
20/7 WED  
20/7 WED  
20/7 WED  
Football  
SELECT  
TOTAL 3  
No.  
1
6
9:00 Dinosaur  
11:00 USJ  
0
9
RETURN  
ENTER  
1
03 13  
1
3
1
SELECT  
TOTAL 3  
No.  
0
9
RETURN  
The padlock mark disappears.  
ENTER  
ªTo stop partway through  
Select “No” in step 5 and press [ENTER] (10).  
Or  
The padlock mark appears.  
ªTo stop partway through  
Select “No” in step 5 and press [ENTER] (10).  
Or  
Press [RETURN] (23).  
Press [RETURN] (23).  
For your reference  
Programmes will be erased even if they are protected if you format  
the disc with DISC INFORMATION (page 31).  
Download from Www.Somanuals.co3m5. All Manuals Search And Download.  
Using the DIRECT NAVIGATOR (continued)  
Erasing parts of a programme  
[RAM]  
Dividing programmes  
[RAM]  
The specified parts of the programme are erased completely  
when you use this procedure and cannot be retrieved. Check  
the programme carefully to ensure it isn’t one you want to keep.  
You can divide a selected programme into two.  
You must be sure you wish to divide a programme because  
once a programme has been divided it cannot be returned to  
its original form.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
After performing steps 1 to 3 of “Erasing programmes”,  
perform the following steps:  
After performing steps 1 to 3 of “Erasing programmes”,  
perform the following steps:  
4
5
Use [3, 4] (10) to select “Partial Erase” and press  
[ENTER] (10).  
Use search functions such as fast-forward and  
slow-motion to find the start point of the part you  
want to erase and press [ENTER] (10).  
4
5
Use [3, 4] (10) to select “Divide” and press  
[ENTER] (10).  
Use search functions such as fast-forward and  
slow-motion to find the point you want to divide and  
press [ENTER] (10).  
Partial  
Erase  
03  
PLAY  
Start  
End  
Divide  
Programme  
03  
Next  
Preview  
Divide  
Exit  
3
0 : 00 . 05  
End  
SELECT  
ENTER  
Exit  
Start  
RETURN  
:
.
0 : 00 . 05  
3
0 : 00 . 05  
SELECT  
ENTER  
Divide  
RETURN  
0 : 00 . 05  
6
Use search functions such as fast-forward and  
slow-motion to find the end point of the part you  
want to erase and press [ENTER] (10).  
6
7
Use [3, 4] (10) to select “Exit” and press [ENTER]  
(10).  
Use [2] (10) to select “Divide” and press [ENTER]  
(10).  
Partial  
Erase  
03  
Start  
End  
The programme is divided at the point.  
Next  
Exit  
Divide Programme  
3
3
0 : 10 . 15  
End  
SELECT  
ENTER  
Once divided, this programme cannot be  
re-combined.  
Start  
0 : 00 . 05  
RETURN  
0 : 10 . 15  
Divide  
Cancel  
SELECT  
RETURN  
ENTER  
7
8
Use [  
Use [  
3
2
,
]
4
]
(10) to select “Exit” and press [ENTER] (10)  
.
.
(10) to select “Erase” and press [ENTER] (10)  
ªTo stop partway through  
Select “Cancel” in step 7 and press [ENTER] (10).  
Or  
Play lists created with the erased part are also erased.  
Partial erase  
Press [RETURN] (23).  
Remaining Time  
Corresponding PLAY LIST will also be erased.  
Erase Cancel  
0:19 SP  
ªTo change the point to divide  
Select “Divide” in step 6, then repeat steps 5-7.  
SELECT  
RETURN  
ENTER  
ªTo check the division point  
ªTo stop partway through  
Select “Cancel” in step 8 and press [ENTER] (10).  
Or  
By selecting “Preview” in step 6 and pressing [ENTER] (10), play  
will begin from a point 10 seconds prior to the division point. You  
may wish to make sure that the division point is at an appropriate  
location.  
Press [RETURN] (23).  
ªTo erase another part of the same programme  
Select “Next” in step 7 and perform step 8, then repeat steps 5-8.  
Notes  
The divided programmes retain the title of the original programme.  
A minute portion of the recording directly preceding the division  
point may be lost.  
For your reference  
Use search and slow-motion to find the points.  
You cannot specify an end point before a start point or a start  
point after an end point.  
You may not be able to specify start and end points within  
3 seconds of each other.  
For your reference  
Use search and slow-motion to find the points.  
It is not possible to carry out “Divide” in the following cases:  
-When the resulting part(s) are extremely short.  
-When the total number of programme is more than 99.  
You cannot specify start and end points if the picture recorded is  
stilled.  
The unit pauses play when the end of the programme is reached  
during this procedure.  
The disc’s available recording time may not increase after  
erasing short parts of programmes.  
Play lists created with the erased part are also erased.  
Download from Www.Somanuals.co3m6. All Manuals Search And Download.  
Using PLAY LIST to edit programmes  
About the PLAY LIST Scene screen  
Displaying PLAY LIST  
[RAM]  
a)  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
Preparations  
Play Scenes  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
003  
---  
b)  
c)  
001 00:00.19  
004  
002  
---  
SELECT PAGE  
0
9
Press [PLAY LIST] (22).  
---  
---  
---  
SELECT  
ENTER  
PLAY LIST  
Back  
001/001  
Next  
RETURN  
001  
004  
002  
---  
003  
---  
a) Play list information  
No. Date Total Scene  
Title  
Edit  
1
1
1
1
1
1
This shows the play list number, date of creation (date/month),  
total play time, and the number of scenes it contains and title (if  
entered).  
3
01 12/7 0:03 006 Auto action  
No.  
02 12/7 0:07  
006 USJ  
0
9
03 20/7 0:06 004 Dinosaur  
SELECT  
ENTER  
/–  
:–  
RETURN  
b) Scenes  
3
9 scenes can be shown on a page.  
The play list screen appears. Scenes are not displayed if you have  
not yet created a play list with the disc.  
c) Turning pages  
If there are more than 9 scenes, use [3, 4, 2, 1] (10) to  
select “2 Back” or “Next 1” and press [ENTER] (10) to move  
to the previous page or next page. You can also enter the 3  
digits with the numeric buttons (4).  
ªTo clear the PLAY LIST screen  
Press [PLAY LIST] (22) or [RETURN] (23).  
The screen returns to the state it was in before you called up the  
play list.  
ªWhat you can do with the PLAY LIST screen  
Creating PLAY LIST (page 38)  
Play Scenes  
Edit  
Playing PLAY LIST (page 39)  
Select a scene to play (page 39)  
Add, move, re-edit and erase scenes  
(pages 40 and 41)  
Copying PLAY LIST (page 42)  
Erasing a PLAY LIST (page 42)  
Give PLAY LIST titles (page 42)  
Checking PLAY LIST’s contents  
(page 42)  
PL Copy  
PL Erase  
Enter Title  
Properties  
For your reference  
When the disc is protected (pages 30 and 64), you can only  
access “Play Scenes” and “Properties”. Release the protection to  
access other items.  
Download from Www.Somanuals.co3m7. All Manuals Search And Download.  
Using PLAY LIST to edit programmes (continued)  
For your reference  
Creating PLAY LIST  
You can fast-forward, rewind, pause and slow-motion while  
playing scenes just as you can during normal play.  
One disc can have a maximum of 99 play lists and 999 scenes.  
These numbers may be reduced under some conditions.  
You cannot specify an end point before a start point or a start  
point after an end point.  
[RAM]  
You can specify start and end points to create a scene, then  
specify the order in which these scenes are played. These scenes  
are not recorded separately so this doesn’t use up much of the  
disc’s capacity.  
If you specify an end point but not a start point, the unit  
determines the beginning of the programme as the start point.  
Similarly, if you specify a start point but not an end point, the unit  
determines the end of the programme as the end point.  
You may not be able to specify start and end points if the material  
is still pictures recorded on other equipment.  
The unit pauses play when the end of the last programme on the  
disc is reached during this procedure.  
You can also display the CREATE PLAY LIST screen by  
selecting “jj” at the bottom of the play list.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you have recorded on.  
1
2
While stopped  
Press [FUNCTIONS] (11).  
Use [3, 4, 2, 1] (10) to select “CREATE PLAY  
LIST” and press [ENTER] (10).  
CREATE PLAY LIST  
PLAY LIST  
-
---
---  
---
---  
3
4
5
Use search functions such as fast-forward and  
slow-motion to find the start point of the scene and  
press [ENTER] (10).  
---
No. Date Total Scene  
Title  
Edit  
3
1
01 12/7 0:03 006 Auto action  
02 12/7 0:07 006 USJ  
No.  
1
1
1
1
1
0
9
03 20/7 0:06 004 Dinosaur  
SELECT  
ENTER  
PLAY LIST No.3 Dinosaur  
PLAY LIST  
/–  
:–  
Creation  
Scene No.  
1
RETURN  
3
01  
PLAY  
Start  
End  
Next  
Exit  
3
0 : 00 . 05  
End  
SELECT  
ENTER  
Start  
RETURN  
0 : 00 . 05  
--:--.--  
Use search functions such as fast-forward and  
slow-motion to find the end point of the scene and  
press [ENTER] (10).  
PLAY LIST No.3  
PLAY LIST  
Creation  
Scene No.  
1
01  
Start  
End  
Next  
Exit  
3
3
0 : 35 . 20  
End  
SELECT  
ENTER  
Start  
RETURN  
0 : 35 . 20  
0 : 00 . 05  
Use [3, 4] (10) to select “Exit” and press [ENTER]  
(10).  
ªTo stop partway through  
Press [RETURN] (23).  
ªTo clear the PLAY LIST screen  
Press [PLAY LIST] (22) or [RETURN] (23).  
The screen returns to the state it was in before you called up the  
play list.  
ªTo specify another scene  
Select “Next” after step 4 and press [ENTER] (10), then repeat  
steps 3 and 4.  
Download from Www.Somanuals.co3m8. All Manuals Search And Download.  
Using PLAY LIST to edit programmes (continued)  
Playing PLAY LIST  
[RAM]  
Playing Scenes  
[RAM]  
Preparations  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
1
2
Press [PLAY LIST] (22).  
Use [3, 4] (10) to select the play list you want to  
play and press [ENTER] (10).  
The play list you select is played.  
You can display the play lists after the sixth one by moving  
[4] (10).  
1
2
Press [PLAY LIST] (22).  
Use [3, 4] (10) to select the play list that contains  
the scene you want to play and use [1] (10).  
Play Scenes  
Edit  
PL Copy  
PL Erase  
Enter Title  
Properties  
PLAY LIST  
001  
004  
002  
---  
003  
---  
No. Date Total Scene  
Title  
Edit  
3
1
01 12/7 0:03 006 Auto action  
02 12/7 0:07 006 USJ  
No.  
1
1
1
1
1
0
9
3
4
Use [3, 4] (10) to select “Play Scenes” and press  
[ENTER] (10).  
03 20/7 0:06 004 Dinosaur  
SELECT  
ENTER  
0
4
2
1
/
7
0
:0  
4
0
09 Baseball  
05 21/7 0:09 015 Movie  
RETURN  
3
06 22/7 0:05 008  
Football  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
Play Scenes  
ªTo stop PLAY LIST play  
Press [] (7).  
The play list appears.  
003  
---  
001 00:00.19  
004  
002  
---  
SELECT PAGE  
0
9
---  
---  
---  
SELECT  
ENTER  
Back  
001/001  
Next  
RETURN  
For your reference  
You can also select play lists from the list in step 2 by entering a 2-  
digit number with the numeric buttons (4).  
If you enter a number larger than the total number of play lists, the  
last play list is selected.  
Use [3, 4, 2, 1] (10) to select the scene you want  
to play and press [ENTER] (10).  
The scene you select is played.  
ªTo stop scene play  
Press [] (7).  
The scene list appears.  
ªTo show scene 10 and later  
In step 4, use [3, 4, 2, 1] (10) to select “Next 1” and press  
[ENTER] (10).  
For your reference  
You can also select a page of scenes in step 4 by entering a 3-digit  
number with the numeric buttons (4).  
To erase a PLAY LIST or a PLAY LIST Scene during play  
1
During play a play list or a play list scene  
Press [ERASE] (30).  
A confirmation message will be displayed.  
Press [2] (10) to select “Yes” and press [ENTER]  
(10).  
2
Select “No” and press [ENTER] (10), or press [RETURN]  
(23) to cancel.  
Download from Www.Somanuals.co3m9. All Manuals Search And Download.  
Using PLAY LIST to edit programmes (continued)  
Adding Scenes to a PLAY LIST  
[RAM]  
Moving a Scene  
[RAM]  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
1
2
Press [PLAY LIST] (22).  
Use [3, 4] (10) to select the desired play list and  
press [1] (10).  
After performing steps 1 to 3 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
4
Use [2, 1] (10) to select “Move” and press  
[ENTER] (10).  
Play Scenes  
Edit  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
PL Copy  
PL Erase  
Enter Title  
Properties  
Edit  
Add  
001 00:00.19  
004  
Move Re-edit Erase  
003  
---  
002  
---  
SELECT PAGE  
0
9
SELECT  
ENTER  
---  
---  
---  
3
Use [3, 4] (10) to select “Edit” and press [ENTER]  
Back  
001/001  
Next  
RETURN  
(10).  
5
6
Use [3, 4, 2, 1] (10) to select the scene you want  
to move and press [ENTER] (10).  
Use [3, 4, 2, 1] (10) to select the scene currently  
in the position to which you want to move the scene  
and press [ENTER] (10).  
The scene you selected in step 5 moves to the position in  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
Edit  
Add  
001 00:00.19  
004  
Move Re-edit Erase  
003  
---  
002  
---  
SELECT PAGE  
0
9
SELECT  
ENTER  
---  
---  
---  
Back  
001/001  
Next  
RETURN  
front of the scene selected.  
4
5
Use [2, 1] (10) to select “Add” and press [ENTER]  
(10).  
Use [3, 4, 2, 1] (10) to select the scene after the  
position you want to add the scene and press  
[ENTER] (10).  
Use search functions such as fast-forward and  
slow-motion to find the start point of the scene and  
press [ENTER] (10).  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
Edit  
Add  
001 00:00.19  
004  
Move Re-edit Erase  
003  
---  
002  
---  
SELECT PAGE  
0
9
SELECT  
ENTER  
---  
---  
---  
6
Back  
001/001  
Next  
RETURN  
ªTo move another scene  
Repeat steps 5 and 6.  
PLAY LIST No.3 Dinosaur  
PLAY LIST  
Add  
Scene No.  
1
01  
PLAY  
Start  
End  
Next  
Exit  
3
0 : 00 . 05  
End  
SELECT  
ENTER  
Start  
RETURN  
0 : 00 . 05  
--:--.--  
7
8
Use search functions such as fast-forward and  
slow-motion to find the end point of the scene and  
press [ENTER] (10).  
Use [3, 4] (10) to select “Exit” and press [ENTER]  
(10).  
The screen from step 4 reappears.  
ªTo return to the previous screen  
Press [RETURN] (23).  
ªTo add other scene  
1) Use [3, 4] (10) after step 7 to select “Next” and press  
[ENTER] (10).  
2) Repeat steps 6 and 7.  
For your reference  
You can fast-forward, rewind, pause and slow-motion while playing  
scenes just as you can during normal play.  
Download from Www.Somanuals.co4m0. All Manuals Search And Download.  
Using PLAY LIST to edit programmes (continued)  
To re-edit a PLAY LIST Scene  
[RAM]  
Erasing a Scene from a PLAY LIST  
[RAM]  
Preparations  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
After performing steps 1 to 3 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
After performing steps 1 to 3 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
4
Use [2, 1] (10) to select “Re-edit” and press  
[ENTER] (10).  
4
Use [2, 1] (10) to select “Erase” and press  
[ENTER] (10).  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
3 12/7 0:02 004 Dinosaur  
PLAY LIST  
Edit  
Edit  
Add  
001 00:00.19  
004  
Move Re-edit Erase  
Add  
001 00:00.19  
004  
Move Re-edit Erase  
003  
---  
003  
---  
002  
---  
002  
---  
SELECT PAGE  
SELECT PAGE  
0
9
0
9
SELECT  
ENTER  
SELECT  
ENTER  
---  
---  
---  
---  
---  
---  
Back  
001/001  
Next  
Back  
001/001  
Next  
RETURN  
RETURN  
5
6
Use [3, 4, 2, 1] (10) to select the scene you want  
to re-edit and press [ENTER] (10).  
Use search function such as fast-forward and slow-  
motion to find the start point of the scene and press  
[ENTER] (10).  
5
6
Use [3, 4, 2, 1] (10) to select the scene you want  
to erase and press [ENTER] (10).  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
Erase Scenes  
7
Use search functions such as fast-forward and  
slow-motion to find the end point of the scene and  
press [ENTER] (10).  
Erase this Scene ?  
Yes  
No  
SELECT  
RETURN  
ENTER  
PLAY LIST No.3  
PLAY LIST  
Re-edit  
Scene No.  
1
01  
The selected scene is erased from the play list.  
Back  
Start  
End  
ªTo erase other scene  
Repeat steps 5 and 6.  
Next  
Exit  
3
3
0 : 35 . 20  
End  
SELECT  
ENTER  
ªTo stop partway  
Select “No” in step 6 and press [ENTER] (10).  
Start  
RETURN  
0 : 35 . 20  
0 : 00 . 05  
Or  
8
Use [3, 4] (10) to select “Exit” and press [ENTER]  
(10).  
Press [RETURN] (23).  
ªTo re-edit another scene  
For your reference  
(1) Use [3, 4] (10) after step 7 to select “Next” or “Back” and  
press [ENTER] (10) until you find the scene you want to re-  
edit.  
The play list itself is erased if you erase all the scenes in it.  
(2) Repeat steps 5-7 to continue re-editing other scenes.  
Note  
You cannot specify an end point before a start point or a start  
point after an end point.  
For your reference  
You can fast-forward, rewind, pause and slow-motion while  
playing scenes just as you can during normal play.  
Download from Www.Somanuals.co4m1. All Manuals Search And Download.  
Using PLAY LIST to edit programmes (continued)  
Copying PLAY LIST  
[RAM]  
Titling PLAY LIST  
[RAM]  
Preparations  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
After performing steps 1 to 2 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
After performing steps 1 to 2 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
3
4
Use [3, 4] (10) to select “PL Copy” and press  
[ENTER] (10).  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
3
Use [3, 4] (10) to select “Enter Title” and press  
[ENTER] (10).  
Enter Title  
_
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
£
%
&
@
_
)
Copy PLAY LIST  
3
4
5
d
g
j
h
k
i
O
[
Copy this PLAY LIST ?  
L
O
R
V
Y
?
l
N
]
ERASE  
SET  
m
n
o
6
7
8
M
P
Yes  
No  
S
p
t
q
u
x
'
r
s
{
(
-/--  
0
SELECT  
T
v
}
-
RETURN  
ENTER  
SELECT  
9
0
W
Z
!
w
"
y
:
z
;
\
|
~
.
,
^
ENTER  
The copied play list appears at the bottom of the list.  
-/--  
SPACE  
RETURN  
ªTo stop partway  
Select “No” in step 4 and press [ENTER] (10).  
Or  
4
Enter the title.  
“Entering titles” (page 29)  
Press [RETURN] (23).  
For your reference  
You can give play lists on DVD-RAM titles of up to 64 characters.  
The full title is shown in the “Properties” screen, but if you enter a  
long title, only part of it is shown in the play list screen.  
Erasing a PLAY LIST  
[RAM]  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
Checking PLAY LIST’s contents  
[RAM]  
After performing steps 1 to 2 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Insert a disc you created play lists on.  
3
4
Use [3, 4] (10) to select “PL Erase” and press  
[ENTER] (10).  
Use [2] (10) to select “Yes” and press [ENTER]  
After performing steps 1 to 2 of “Adding Scenes to a PLAY  
LIST”, perform the following steps:  
(10).  
3
Use [3, 4] (10) to select “Properties” and press  
[ENTER] (10).  
Erase PLAY LIST  
Erase this PLAY LIST ?  
Properties  
Yes  
No  
Dinosaur  
SELECT  
No.  
3
Date 22/ 7/2005 FRI  
RETURN  
ENTER  
Scenes 004 Total 0:05.51  
The play list is erased.  
RETURN  
ENTER  
ªTo stop partway  
Select “No” in step 4 and press [ENTER] (10).  
Or  
Press [RETURN] (23).  
Download from Www.Somanuals.co4m2. All Manuals Search And Download.  
Using DISPLAY menus  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
Disc menu  
[RAM] [DVD-R] [DVD-V] [VCD]  
Remote control only  
Disc  
Play  
Picture  
Sound  
DISPLAY menus contain information about the disc or unit. These  
menus allow you to perform operations by changing this  
information.  
Î Digital 2/0ch  
OFF  
L R  
1
Soundtrack  
Subtitle  
Audio channel  
Common procedures  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
Soundtrack  
Soundtrack language [DVD-V]  
(See [A] Soundtrack/Subtitle language.)  
Change the number to select a soundtrack.  
1
Press [DISPLAY] (34).  
Disc  
Play  
Î Digital 2/0ch  
OFF  
L R  
1
Soundtrack  
Audio attribute [RAM] [DVD-R] [DVD-V]  
(See [B] Audio attributes.)  
Subtitle  
Picture  
Audio channel  
Sound  
Karaoke vocals, on and off (Karaoke [DVD-V] only)  
Solo: ON()OFF  
Duet: OFF()V1iV2()V1()V2  
^___________J  
Setting  
Menu  
Item  
2
3
4
Use [3, 4] (10) to select the menu and press  
[1] (10).  
Use [3, 4] (10) to select the item and press  
[1] (10).  
Use [3, 4] (10) to select the setting.  
Some options require different operations. Follow the on-  
Subtitle  
Subtitle language [DVD-V]  
(See [A] Soundtrack/Subtitle language.)  
Change the number to select a subtitle language.  
Subtitles on/off [RAM] [DVD-R] [DVD-V]  
Turn the subtitles on or off.  
screen instructions and the instructions described later.  
Angle [DVD-V]  
ªTo return to the previous screen  
Change the number to select an angle.  
Press [RETURN] (23).  
Audio channel [RAM] [VCD]  
ªWhen you are finished  
Press [DISPLAY] (34).  
Select the audio channel. (page 16)  
PBC [VCD]  
For your reference  
Playback control on/off  
The screens depend on the disc contents.  
Depending on the condition of the unit (playing, stopped, etc.)  
and the type of software you are playing, there are some items  
that you cannot select or change.  
Indicates whether menu play (playback control) is on or off.  
[A] Soundtrack/Subtitle language  
ENG: English  
FRA: French  
DEU: German  
ITA: Italian  
ESP: Spanish  
NLD: Dutch  
SVE: Swedish  
NOR: Norwegian  
DAN: Danish  
POR: Portuguese  
RUS: Russian  
JPN: Japanese  
CHI: Chinese  
KOR: Korean  
MAL: Malay  
VIE: Vietnamese  
THA: Thai  
¢: Others  
[B] Audio attributes  
Î Digital/DTS/MPEG: Signal type  
k (kHz):  
b (bit):  
ch (channel):  
Sampling frequency  
Number of bits  
Number of channels  
For your reference  
You can only select subtitles, soundtracks and angles if they are  
recorded on the disc.  
Some discs allow changes to soundtracks, subtitles and angles  
only by using the disc’s menus.  
If the subtitles overlap closed captions recorded on discs, turn  
the subtitles off.  
Download from Www.Somanuals.co4m3. All Manuals Search And Download.  
Using DISPLAY menus (continued)  
Play menu  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
Sound menu  
[RAM] [DVD-R] [DVD-V]  
Disc  
Play  
Picture  
Sound  
Disc  
Play  
Picture  
Sound  
OFF  
OFF  
Repeat Play  
V. S. S.  
Dialog Enhancer  
OFF  
1s10  
Marker  
††††††††††  
Repeat play [RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
(page 45)  
V.S.S. [RAM] [DVD-R] [DVD-V]  
(Only with Dolby Digital with 2 or more channels)  
Enjoy a surround-like effect if you are using 2 front speakers  
only. The effect is broadened and sound seems to come from  
virtual speakers on either side if the disc has surround  
signals recorded on it.  
You can play a programme, play list, chapter, title, group or  
track repeatedly.  
Marker [RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3] (page 17)  
You can mark points on a disc to return to later.  
Natural()Emphasis()OFF  
^__________J  
Picture menu  
[RAM] [DVD-R] [DVD-V] [VCD]  
Notes  
V.S.S. will not work, or will have less effect, with some discs,  
even if you select “Natural” or “Emphasis”.  
Turn V.S.S. off if it causes distortion.  
Disc  
Play  
Picture  
Sound  
Normal  
ON  
MODE  
DNR  
ON  
AUTO1  
Progressive  
Transfer  
Dialog Enhancer [RAM] [DVD-R] [DVD-V]  
(Dolby Digital, 3-channel or over only, including a center  
channel)  
MODE  
To select the picture mode during play  
The volume of the center channel is raised to make dialog  
easier to hear.  
ON()OFF  
Normal: Normal mode  
Soft:  
Soft mode  
Fine mode  
Fine:  
Cinema: Cinema mode (mellows movie, enhances detail in  
dark scenes)  
DNR  
You can turn on and off the DNR.  
ON()OFF  
Progressive  
This menu is displayed only when setting both  
“Progressive (NTSC)” to “On” and “TV System” to “NTSC” in  
“Connection” Menu.  
ON:  
OFF:  
Enables progressive output  
Disables progressive output  
Transfer  
(When progressive output is ON)  
Select the method of conversion for progressive output to suit  
the type of material being played. (page 61)  
Auto1:  
For film material  
Auto2:  
For film material (the same as Auto1, but able to  
convert 30 frames per second progressive video)  
For video material  
Video:  
Download from Www.Somanuals.co4m4. All Manuals Search And Download.  
Using DISPLAY menus (continued)  
Repeat play  
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]  
During play  
Use [3, 4] (10).  
Disc  
Play  
Picture  
Sound  
OFF  
Repeat Play  
1s10  
Marker  
††††††††††  
The display changes as illustrated.  
[RAM] [DVD-R]  
PRG (PROGRAMME),-.All,-.OFF  
^----------------------------------------------J  
[DVD-V]  
Chapter,-.Title,-.OFF  
^-------------------------J  
[CD] [VCD]  
Track,-.All,-.OFF  
^------------------J  
[MP3]  
Track,-.Group,-.OFF  
^------------------------J  
While playing a play list  
[RAM]  
PL (PLAY LIST),-.OFF  
If the Video CD has playback control  
1) While stopped (the screen saver is on the  
television), press the numeric buttons (4)  
to select a track.  
2) Do the above operation.  
Notes  
Repeat play may not work as desired with some discs.  
Repeat play does not work if the disc’s elapsed play time is not  
shown on the unit’s display.  
You cannot use repeat play to repeat an entire DVD-Video, MP3  
discs or all the play lists on a DVD-RAM.  
[ERASE] (30) does not work while in repeat play mode.  
Download from Www.Somanuals.co4m5. All Manuals Search And Download.  
Child Lock  
The Child Lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit.  
Remote control only  
To activate the Child Lock  
Hold down [ENTER] (10) and [RETURN] (23) simultaneously until “X HOLD” appears on the unit’s display.  
If you press a button while the Child Lock is on, “X HOLD” appears on the unit’s display and operation is impossible.  
To cancel the Child Lock  
Hold down [ENTER] (10) and [RETURN] (23) simultaneously until “X HOLD” disappears.  
If you cannot cancel the Child Lock, press [RETURN] (23) and then perform the operation.  
Upgrading your system  
First of all, please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting  
cables.  
Enjoying more powerful sound  
Refer to the relevant pages for details.  
Digital connection  
Connect to an amplifier with  
built-in decoders.  
Page 47  
[A]  
SETUPSound  
Set “PCM Down Conversion”  
to “On”.  
Set “Dolby Digital” and “DTS”  
to suit the equipment.  
Page 54  
Enjoying 5.1-channel  
surround sound with Dolby  
Digital and DTS  
Change speaker settings on the  
amplifier.  
Analog connection  
Connect to an analog amplifier  
or system component.  
Page 47  
[B]  
SETUPSound  
Set “PCM Down Conversion”  
to “Off”.  
Page 54  
Page 54  
To enjoy stereo or Dolby Pro  
Logic  
Digital connection  
Connect to a digital amplifier or  
system component.  
Page 47  
[A]  
SETUPSound  
Set “PCM Down Conversion”  
to “On”.  
Set “Dolby Digital” to “PCM”.  
Set “DTS” to “Off”.  
ªOther uses  
Record to digital recording equipment or cassette deck ([A] [B] page 47)  
Record from an video cassette recorder (page 49)  
Use connection [B] to enjoy discs recorded with a sampling frequency of 96 kHz. Sound will not be output if you use connection [A] and set  
“PCM Down Conversion” to “Off” due to copy protection. (Convert the signal to 48 kHz to enjoy this type of audio.)  
For your reference  
The equipment connections described are examples.  
Before connection, turn off all equipment and read the appropriate operating instructions.  
Note  
You can enjoy Dolby Digital in stereo with this unit alone. (This unit does not have a DTS decoder.)  
Download from Www.Somanuals.co4m6. All Manuals Search And Download.  
Upgrading your system (continued)  
Connecting a digital amplifier or system  
component [A]  
Connecting an analog amplifier or  
system component [B]  
(1)  
a)  
b)  
Y
P
B
PR  
OPTICAL  
COMPONENT  
VIDEO OUT  
(NTSC:480P/480I,  
PAL:576I)  
DIGITAL AUDIOUT  
(PCM/BITSTREAM)  
R
-
AUDIO  
-
L
VIDEO  
S-VIDEO  
O
O
-
-
L
L
VIDEO S-VIDEO  
Y
P
B
PR  
(2)  
(1)  
OPTICAL  
COMPONENT  
VIDEO OUT  
(NTSC:480P/480I,  
DIGITAL AUDIO OU  
(PCM/BITSTREAM  
VIDEO S-VIDEO  
R
AUDIO  
VIDEO  
S-VIDEO  
PAL:576I)  
(2)  
(3)  
(3)  
(4)  
(4)  
(5)  
(5)  
(1) Audio cable  
a) Red (R)  
b) White (L)  
(2) To AUDIO OUT (L/R)  
(3) Audio cable (not supplied)  
(4) Audio input (L/R)  
(1) Insert fully, with this side facing up. (Do not bend when  
connecting.)  
(5) 2-channel analog amplifier or system component  
(not supplied)  
(2) Optical digital audio cable (not supplied)  
(3) To optical digital input  
(4) Amplifier  
ªTo enjoy Dolby Pro Logic (page 61)  
or  
You will also need to connect center and surround speakers in  
addition to the front speakers to enjoy surround sound. Read the  
instructions for the equipment for connection details. Turn V.S.S.  
off. Dolby Pro Logic will not function correctly if V.S.S. is on.  
system component (with or without decoders) (not supplied)  
(5) Speakers (not supplied)  
Example: 6 speakers  
For your reference  
Change the settings in the “Sound” menus (page 52) to suit the  
digital equipment you have connected. If the equipment can  
decode Dolby Digital, set “Dolby Digital” to “Bitstream” (factory  
setting). If the equipment can decode DTS, set “DTS” to  
“Bitstream”.  
The DTS decoder must be compatible with the signals recorded  
on DVD.  
During Quick View (Play k1.3), the Digital Audio Output will  
change to PCM Output.  
You can record the digital signal directly onto digital recording  
equipment.  
The signals on DVDs will be converted to 48 kHz/16 bit linear  
PCM.  
When recording DVDs, ensure the following conditions are met.  
There is no copy guard recorded on the disc.  
The recording equipment can handle a sampling frequency of  
48 kHz/16 bit.  
You cannot record MP3.  
If you want to use the synchro recording feature on your digital  
recording equipment and you use connection [A] or [B] to record  
from CDs or video CDs, first pause at the point you want to record  
from, activate the synchro feature, then restart play on the unit.  
Download from Www.Somanuals.co4m7. All Manuals Search And Download.  
Upgrading your system (continued)  
7
Use [3, 4] (10) to select “Progressive (NTSC)” and  
press [ENTER] (10).  
Connecting a Television with  
Component video input terminals  
(For NTSC TV System only)  
Progressive (NTSC)  
SETUP  
SETUP  
TV Aspect  
Progressive (NTSC)  
TV System  
On  
Off  
Tuning  
Settings  
Disc  
Picture  
Sound  
Tuning  
Settings  
Disc  
Picture  
Sound  
(1)  
Normal (4:3) TV  
Norm (4:3)TV Settings (DVD-Video)  
Norm (4:3)TV Settings (DVD-RAM)  
COMPONENT  
VIDEO IN  
SELECT  
ENTER  
SELECT  
ENTER  
Tab  
Display  
Connection  
Display  
Connection  
Y
PB PR  
RETURN  
RETURN  
8
Use [3, 4] (10) to select “On” and press [ENTER]  
(10).  
(2)  
(3)  
ªTo return to the previous screen  
Press [RETURN] (23).  
ªTo enjoy progressive video  
Connect to the component video (480P) input terminals on a  
television compatible with this unit's copy guard system. (Video will  
not be displayed correctly if connected to an incompatible  
television.)  
(4)  
(5)  
All Panasonic televisions that have 480P input terminals are  
compatible. Consult the manufacturer if you have another brand  
of television.  
ªCOMPONENT VIDEO OUT terminal  
VIDEO S-VIDEO  
Y
P
B
PR  
(6)  
These terminals can be used for either interlace or progressive  
output and provide a purer picture than the S-VIDEO OUT  
terminal.  
(7)  
OPTICAL  
COMPONENT  
VIDEO OUT  
(NTSC:480P/480I,  
DIGITAL AUDIO OUT  
(PCM/BITSTREAM)  
VIDEO S-VIDEO  
R
-
AUDIO  
-
L
VIDEO  
S-VIDEO  
PAL:576I)  
Connection using these terminals outputs the color difference  
signals (PB/PR) and luminance signal (Y) separately in order to  
achieve high fidelity in reproducing colors.  
The description of the component video input terminals depends  
on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR).  
Connect to terminals of the same colour.  
(1) Television with Component video input terminals (not supplied)  
(2) Audio input (L/R)  
(3) Component video input (Y/PB/PR)  
(4) Audio cable (not supplied)  
(5) Video cable (not supplied)  
(6) To AUDIO OUT (L/R)  
When making this connection, ensure you connect the audio  
cables to the corresponding audio input terminals on the television.  
(7) To COMPONENT VIDEO OUT (Y/PB/PR)  
ªRegarding Progressive Television Picture  
Progressive image aspect (height to width ratio) is set at a  
standard 16:9. DVD-Video which has been set at 16:9 will be  
displayed correctly. However, 4:3 video material will be stretched  
to the right and left when displayed.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
1
2
Press [DVD, Í] (1) to turn this unit on.  
Press [FUNCTIONS] (11) to show the FUNCTIONS  
To view the picture at the right aspect  
For televisions that allow the aspect of progressive images to be  
adjusted, use the function provided on the television and adjust  
as necessary.  
For televisions which do not allow the aspect of progressive  
images to be adjusted, please set “Progressive (NTSC)” to “Off”  
(page 53).  
window.  
3
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
DVD-RAM  
Disc Protection Off  
FUNCTIONS  
Cartridge Protection Off  
S
S
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST  
SELECT  
ENTER  
TIMER RECORDING  
SETUP  
PLAY  
PLAY LIST  
Notes  
RETURN  
TOP PLAY  
FLEXIBLE REC  
If the unit is connected to the TV through VIDEO OUT or S-  
VIDEO OUT, output will be interlace only (even if you select  
progressive output).  
When progressive output is on, closed captions can not be  
displayed.  
4
5
Use [3, 4] (10) to select the “Connection” and  
press [2] or [1] (10).  
Use [3, 4] (10) to select “TV System” and press  
[ENTER] (10).  
TV System  
SETUP  
SETUP  
TV Aspect  
Progressive (NTSC)  
TV System  
PAL  
NTSC  
Tuning  
Settings  
Disc  
Picture  
Sound  
Tuning  
Settings  
Disc  
Picture  
Sound  
Normal (4:3) TV  
Norm (4:3)TV Settings (DVD-Video)  
Norm (4:3)TV Settings (DVD-RAM)  
SELECT  
ENTER  
SELECT  
ENTER  
Tab  
Display  
Connection  
Display  
Connection  
RETURN  
RETURN  
6
Use [3, 4] (10) to select “NTSC” and press  
[ENTER] (10).  
Download from Www.Somanuals.co4m8. All Manuals Search And Download.  
Upgrading your system (continued)  
Connecting a video cassette recorder  
When connecting to the AV2 input terminals on the  
front of the unit  
When connecting to the input terminals on the rear of  
the unit  
R - AUDIO - L  
VIDEO S-VIDEO  
L/MONO  
AUDIO IN  
R
VIDEO IN  
S-VIDEO IN  
AV2  
R - AUDIO - L  
VIDEO S-VIDEO  
R - AUDIO - L  
(1)  
(2)  
(1)  
(2)  
(3)  
(3)  
(1) Audio/Video cable (not supplied)  
(2) S video cable (not supplied)  
(3) Other playback equipment  
Connect to the video and audio output terminals.  
(1) S video cable (not supplied)  
(2) Audio/Video cable (not supplied)  
(3) Other playback equipment  
Note  
If audio output of the other equipment is monaural, use a stereo-  
monaural conversion cable (not supplied).  
Connect to the video and audio output terminals.  
Note  
If the audio output of the other equipment is monaural, connect to  
L/MONO. (Both left and right channels are recorded when  
connected through L/MONO.)  
Download from Www.Somanuals.co4m9. All Manuals Search And Download.  
Changing the unit’s settings  
Common procedures  
Refer to the summary of settings table on page 51 and use the following procedure to change the settings if necessary.  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
1
2
While stopped  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
Use [3, 4, 2, 1] (10) to select “SETUP” and press [ENTER] (10).  
(DMR-E51GCS)  
(2)  
(DMR-E50GN)  
(2)  
(3)  
(3)  
SETUP  
SETUP  
Remote  
DVD 1  
Remote  
DVD 1  
Clock  
Clock  
Shipping Condition  
Country  
Others  
Tuning  
Settings  
Disc  
Tuning  
Settings  
Disc  
Shipping Condition  
(1)  
(1)  
Picture  
Sound  
Display  
Connection  
Picture  
Sound  
Display  
Connection  
Tab  
SELECT  
Tab  
SELECT  
RETURN  
RETURN  
(1) Menus  
The SETUP menu is made up of seven menusTuning, Settings, Disc, Picture, Sound, Display and Connection. Select the menu’s tab to  
display the items.  
(2) Items  
A list of items in the menu you selected.  
(3) Options  
This shows the current settings. The options are shown when you select an item.  
3
4
5
Use [3, 4] (10) to select the menu’s tab and press [2] or [1] (10).  
Use [3, 4] (10) to select the item you want to change and press [ENTER] (10).  
Use [3, 4] (10) to select the option and press [ENTER] (10).  
Some options require different operations. Follow the on-screen instructions and the instructions described.  
ªTo return to the previous screen  
Press [RETURN] (23). Even if you have changed an option, the change is not accepted unless you press [ENTER] (10).  
ªWhen you are finished  
Press [FUNCTIONS] (11).  
For your reference  
The unit retains these settings in its memory until you change them, even if you turn it off.  
Download from Www.Somanuals.co5m0. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
ªDisc [DVD-V]  
Summary of settings  
Setting the language of disc menu, audio and subtitles for playing  
the DVD-Video.  
This description shows the initial settings for this unit. See  
page 50 for details on menu operation.  
Some discs are designed to start in a certain language despite  
any changes you make here.  
If a language which is not recorded is selected, or if languages  
are already fixed in disc, the default language in the disc will play  
instead.  
Underlined items are the factory presets.  
ªTuning  
Manual  
Auto-Setup Restart  
Soundtrack  
ªSettings  
Choose the preferred audio language.  
[English] [French] [German] [Italian] [Spanish] [Original]  
[Other ¢¢¢¢]  
Remote  
Change the remote control code so you can use other Panasonic  
DVD equipment at the same time.  
[DVD 1] [DVD 2] [DVD 3]  
Subtitle  
Choose the preferred subtitle language.  
[Automatic] [English] [French] [German] [Italian]  
[Spanish] [Other ¢¢¢¢]  
Clock  
Clock Setting (page 56)  
You can adjust the clock.  
Menus  
Country (DMR-E50GN only)  
Choose the preferred language for disc menus.  
[English] [French] [German] [Italian] [Spanish]  
[Other ¢¢¢¢]  
[Australia] [New Zealand] [Others]  
Shipping Condition  
The all settings in the SETUP screen return to the factory settings.  
(except for the ratings level and the password)  
[Yes] [No]  
Original  
The original language of each disc will be selected.  
Other ¢¢¢¢  
This is language code setting.  
Input a code number with the numeric buttons (4).  
(See below language code list)  
Automatic  
If the language selected for “Soundtrack” is not available,  
subtitles of that language will automatically appear if  
available on that disc.  
Ratings (page 54)  
You can limit play of DVDs unsuitable for some audiences,  
children, for example. Play and changes to the settings are not  
possible unless you enter a password.  
Setting ratings (When level 8 is selected)  
[8 No Limit]:  
[1] to [7]:  
All DVD-Video can be played.  
Prohibits play of DVD-Video with  
corresponding ratings recorded on them.  
Prohibits play of all DVD-Video.  
[0 Lock All]:  
Changing ratings (When level 0–7 is selected)  
[Unlock Recorder] [Change Password]  
[Change Level] [Temporary Unlock]  
Language code list  
Abkhazian:  
Afar:  
Afrikaans:  
Albanian:  
Ameharic:  
Arabic:  
Armenian:  
Assamese:  
Aymara:  
Azerbaijani:  
Bashkir:  
6566 Chinese:  
6565 Corsican:  
6570 Croatian:  
8381 Czech:  
6577 Danish:  
6582 Dutch:  
7289 English:  
6583 Esperanto:  
6588 Estonian:  
6590 Faroese:  
6665 Fiji:  
9072 Hausa:  
6779 Hebrew:  
7282 Hindi:  
6783 Hungarian:  
6865 Icelandic:  
7876 Indonesian:  
6978 Interlingua:  
6979 Irish:  
7265 Lithuanian:  
7387 Macedonian:  
7273 Malagasy:  
7285 Malay:  
7383 Malayalam:  
7378 Maltese:  
7365 Maori:  
7165 Marathi:  
7384 Moldavian:  
7465 Mongolian:  
7487 Nauru:  
7578 Nepali:  
7583 Norwegian:  
7575 Oriya:  
7589 Pashto, Pushto: 8083 Sundanese:  
7579 Persian:  
7585 Polish:  
7684 Romanian:  
7775 Russian:  
7771 Samoan:  
7783 Sanskrit:  
7776 Scots Gaelic:  
7784 Serbian:  
7773 Serbo-Croatian: 8372 Turkmen:  
7782 Shona:  
7779 Sindhi:  
7778 Singhalese:  
7865 Slovak:  
7869 Slovenian:  
7879 Somali:  
7982 Spanish:  
8279 Telugu:  
8285 Thai:  
8377 Tibetan:  
8365 Tigrinya:  
7168 Tonga:  
8382 Turkish:  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
8378 Twi:  
6984 Italian:  
8368 Ukrainian:  
8373 Urdu:  
8375 Uzbek:  
8376 Vietnamese:  
8379 Volapük:  
6983 Welsh:  
8385 Wolof:  
8387 Xhosa:  
8386 Yiddish:  
8476 Yoruba:  
8471 Zulu:  
8465  
7079 Japanese:  
7074 Javanese:  
7073 Kannada:  
7082 Kashmiri:  
7089 Kazakh:  
7176 Kirghiz:  
7565 Korean:  
6869 Kurdish:  
6976 Laotian:  
7576 Latin:  
Basque:  
6985 Finnish:  
Bengali, Bangla: 6678 French:  
Bhutani:  
Bihari:  
Breton:  
Bulgarian:  
Burmese:  
Byelorussian:  
Cambodian:  
Catalan:  
6890 Frisian:  
6672 Galician:  
6682 Georgian:  
6671 German:  
7789 Greek:  
6669 Greenlandic:  
7577 Guarani:  
6765 Gujarati:  
7065 Swahili:  
8076 Swedish:  
8084 Tagalog:  
8065 Tajik:  
7679 Portuguese:  
7665 Punjabi:  
7178 Latvian, Lettish: 7686 Quechua:  
7185 Lingala:  
8185 Tamil:  
7678 Rhaeto-Romance: 8277 Tatar:  
8484  
Download from Www.Somanuals.co5m1. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Underlined items are the factory presets.  
ªSound  
PLAY t1.3 & Audio during Search (PLAY) (page 14)  
[RAM] [DVD-R] [DVD-V] [VCD]  
Choose whether to operate the Quick View (Play k1.3) or not and  
whether to have sound during search.  
ªPicture  
Hybrid VBR Resolution (REC)  
Switch between automatic and fixed hybrid VBR resolution when  
recording.  
[On] [Off]  
[Automatic] [Fixed]  
Dynamic Range Compression (PLAY)  
[DVD-V] (Dolby Digital only)  
Change the dynamic range for late night viewing.  
[On] [Off]  
Automatic  
The unit automatically switches resolution rates during  
recording according to the image. The unit reduces block  
noise, which occurs during MPEG compression, by selecting  
the optimum rate.  
Bilingual Audio Selection (REC) (page 16)  
Select whether to record the main or secondary audio type when  
recording to DVD-R.  
Fixed  
The resolution rate is fixed to ensure the resolution rate is not  
reduced.  
[M1] [M2]  
Still Mode (PLAY)  
Select the type of picture shown when you pause play.  
[Automatic] [Field] [Frame]  
Digital Audio Output (PLAY)  
(Press [ENTER] (10) to show the following settings. To return to  
the previous screen, press [RETURN] (23).)  
PCM Down Conversion (page 54)  
Field  
Less blurred field stills are shown. Select if jittering occurs  
when “Automatic” is selected.  
Frame  
[On] [Off]  
Select “On” when using a copyright protected disc, since the  
audio output does not work.  
Sharper frame stills are shown. Select if small text or fine  
patterns cannot be seen clearly when “Automatic” is  
selected.  
Dolby Digital (page 54)  
Choose whether to output Dolby Digital bitstream signals for  
decoding on other equipment or to convert them to PCM  
signals for 2-channel output.  
[Bitstream] [PCM]  
DTS (page 54)  
Choose whether to output DTS bitstream signals for  
decoding on other equipment or to not output signals at all.  
[Bitstream] [Off]  
MPEG (page 54)  
Choose whether to output MPEG bitstream signals for  
decoding on other equipment or to convert them to PCM  
signals for 2-channel output.  
[Bitstream] [PCM]  
Download from Www.Somanuals.co5m2. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Underlined items are the factory presets.  
Norm (4:3) TV Settings (DVD-Video)  
You can select how to reflect the image on the TV, when you  
watch 16:9 images (DVD-Video) on 4:3 TV.  
[Pan & Scan] [Letterbox]  
ªDisplay  
On-Screen Messages  
Choose whether to show on-screen messages automatically or  
not.  
Pan & Scan  
Video recorded for a widescreen is played with the sides cut  
off if the pan & scan was specified by the producer of the  
disc. 16:9 software prohibited from being shown in the pan &  
scan style will appear in the letterbox style (with black bands  
above and below the picture) despite the setting here.  
[Automatic] [Off]  
Grey Background  
Select whether to show the grey background, normally shown  
when television reception is poor.  
[On] [Off]  
Channel Guide  
[On] [Off]  
On  
The Channel Guide will appear for a few seconds each time  
the channel is changed with [X, W, CH] (18).  
Off  
Letterbox  
Video recorded for a widescreen is played in the letterbox  
style.  
The Channel Guide will not appear.  
FL Display  
Changes the brightness of the unit’s display.  
[Bright] [Dim] [Automatic]  
Automatic  
Norm (4:3) TV Settings (DVD-RAM)  
In standby mode: Off  
During normal play: Dim  
Others: Bright  
You can select how to reflect the image on the TV, when you  
watch 16:9 images (DVD-RAM) on 4:3 TV.  
[Norm (4:3)] [Pan & Scan] [Letterbox]  
ªConnection  
Norm (4:3)  
Programmes played as recorded.  
Pan & Scan  
TV Aspect (page 12)  
Choose the setting to suit your television and preference.  
Video recorded for a widescreen is played with the sides cut  
[Norm (4:3)] [Wide (16:9)]  
off if the pan & scan format is specified at the time of  
recording.  
Letterbox  
Progressive (NTSC)  
[On] [Off]  
On  
Video recorded for a widescreen is played in the letterbox  
style.  
Select when connecting to a NTSC television with  
component video input terminals.  
Off  
Select when connecting to a PAL television.  
TV System  
[PAL] [NTSC]  
PAL  
Select when connecting to a PAL or Multi-system television.  
Select to record television programmes and PAL input from  
other equipment.  
NTSC  
Select when connecting to a NTSC television.  
Select to record NTSC input from other equipment. Television  
programmes cannot be recorded properly.  
To change the TV system (PAL/NTSC) setting:  
While stopped, keep pressing [] (7) and [<, OPEN/CLOSE]  
(27) on the main unit for 5 or more seconds.  
If the playback picture on the TV screen from a Video CD isn’t  
shown correctly:  
- When connecting to Multi-system TV, select “NTSC”. (After  
viewing the disc, return the setting to “PAL.)  
- When connecting to PAL TV, the lower part of the picture  
cannot be displayed correctly during the fast forward and  
rewind.  
Download from Www.Somanuals.co5m3. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Entering a password (Ratings)  
You can limit play of DVDs unsuitable for some audiences,  
children, for example. Play and changes to the settings are not  
possible unless you enter a password.  
Digital output  
Change these settings when you have connected equipment  
through this unit’s OPTICAL DIGITAL AUDIO OUT terminal.  
PCM Down Conversion  
When setting ratings  
Off (Factory preset):  
The password screen is shown when you select levels 0 to 7.  
1) Input a 4-digit password with the numeric buttons (4).  
If you enter a wrong number, press [2] (10) to erase it  
before you press [ENTER] (10).  
Do not forget your password.  
2) Press [ENTER] (10).  
When you have used audio cables to connect the unit to other  
equipment (analog connection [B] page 47).  
On:  
When you have used an optical digital cable to connect the unit to  
other equipment (digital connection [A] page 47). Output is limited  
to 48 kHz/16 bit.  
3) Press [ENTER] (10).  
The password is entered and the unit is locked.  
Output of audio with a sampling frequency of 96 kHz  
Audio is output as follows in accordance with the connections and  
settings you make.  
Now, when you insert a DVD-Video that exceeds the ratings limit  
you set, a message appears on the television.  
Follow the on-screen instructions.  
Connection  
Setting  
When changing ratings  
[A] (digital)  
[B] (analog)  
The password screen is shown when you select “Ratings”.  
1) Input a 4-digit password with the numeric buttons (4) and  
press [ENTER] (10).  
No output*1  
Off  
On  
Output as 96 kHz  
Unlock Recorder:  
To unlock the unit and return the rating  
to 8  
Converted and output  
as 48 kHz/16 bit  
Converted and output  
as 48 kHz  
Change Password:  
Change Level:  
Temporary Unlock:  
To change your password  
To change the rating level  
To temporarily unlock the unit (the unit  
locks again if you switch it to standby  
or open the disc tray)  
*1 Audio is output at 96 kHz if the DVD is unprotected, but the  
connected equipment must be able to handle such signals in  
order to play them.  
Dolby Digital  
Bitstream (Factory preset):  
When you have connected a unit with a built-in Dolby Digital  
decoder.  
2) Select the item with [3, 4] (10) and press [ENTER] (10).  
Actual screens depend on the operation. Follow the on-screen  
instructions.  
PCM:  
When you have connected a unit that doesn’t have a built-in Dolby  
Digital decoder.*2  
DTS  
Off (Factory preset):  
When you have connected a unit that doesn’t have a built-in DTS  
decoder.*2  
Bitstream:  
When you have connected a unit with a built-in DTS decoder.  
MPEG  
Bitstream:  
When you have connected a unit with a built-in MPEG decoder.  
PCM (Factory preset):  
When you have connected a unit that doesn’t have a built-in  
MPEG decoder.*2  
*2 Set “Dolby Digital” to “PCM”, “DTS” to “Off” and “MPEG” to  
“PCM” if the other equipment doesn’t have decoders. Incorrect  
settings can cause noise to be output which can be harmful to  
your ears and speakers, and audio will not be recorded properly  
to digital recording equipment.  
Download from Www.Somanuals.co5m4. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Remote Setting  
Operating other Panasonic DVD  
equipment with the remote control  
By changing the remote control code, you can operate other DVD  
recorders and players manufactured by Panasonic.  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
Most of the DVD recorders and players manufactured by  
Panasonic use the same system for their remote controls, so if you  
operate them in the same place, the controls can be confused by  
the different pieces of equipment. Use the following procedure to  
change the remote control code to solve this problem.  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
The SETUP screen appears.  
DVD-RAM  
Disc Protection Off  
FUNCTIONS  
Cartridge Protection Off  
Use “1”, the factory set code, under normal circumstances.  
S
S
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST  
Preparation  
Switch [DVD, TV] (15) to “DVD”.  
SELECT  
ENTER  
TIMER RECORDING  
SETUP  
PLAY  
PLAY LIST  
Press [ENTER] (10) and the numeric buttons (4)  
corresponding to the code you want to set, [1], [2] or  
[3], at the same time for about 2 seconds.  
RETURN  
TOP PLAY  
FLEXIBLE REC  
2
Use [3, 4] (10) to select the “Settings” tab and  
press [2] or [1] (10).  
Notes  
(DMR-E51GCS)  
(DMR-E50GN)  
Be sure to set the same remote control code on the main unit as  
you did for the remote control itself (page 51, “Settings” —  
“Remote”).  
The following display appears on the unit’s display if its code and  
the remote control’s code are different. Change the remote  
control’s code to suit the unit.  
SETUP  
SETUP  
Remote  
Clock  
DVD 1  
Remote  
Clock  
DVD 1  
Shipping Condition  
Country  
Others  
Tuning  
Settings  
Disc  
Picture  
Sound  
Tuning  
Settings  
Disc  
Picture  
Sound  
Shipping Condition  
Tab  
SELECT  
Tab  
SELECT  
Display  
Connection  
Display  
Connection  
RETURN  
RETURN  
3
4
Use [3, 4] (10) to select “Remote” and press  
[ENTER] (10).  
Use [3, 4] (10) to select “DVD 1”, “DVD 2” or  
“DVD 3” and press [ENTER] (10).  
DVD 1:  
The unit’s remote control code  
The display disappears after about 5 seconds.  
Select this setting on both the unit and the remote control for  
normal use with one unit.  
DVD 2/DVD 3:  
Select this setting on both the unit and the remote control  
when using this unit and another Panasonic unit in the same  
place. This ensures that you can operate both units  
independently with their respective remote control.  
It also allows you to operate both units with a single remote  
control, simply by changing the remote control mode on the  
remote control.  
5
6
To change the remote control mode on the remote  
control itself, press [ENTER] (10) and the numeric  
buttons (4) corresponding to the code you want to  
set, [1], [2] or [3], at the same time for about 2  
seconds.  
Press [RETURN] (23).  
Download from Www.Somanuals.co5m5. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Clock Settings  
Channel Settings  
Preparations  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
Selecting the manual tuning  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
The SETUP screen appears.  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
DVD-RAM  
The SETUP screen appears.  
Disc Protection Off  
FUNCTIONS  
Cartridge Protection Off  
2
3
Use [3, 4] (10) to select the “Tuning” tab and  
press [2] or [1] (10).  
Use [3, 4] (10) to select “Manual” and press  
S
S
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST  
SELECT  
TIMER RECORDING  
SETUP  
PLAY  
PLAY LIST  
[ENTER] (10).  
ENTER  
RETURN  
TOP PLAY  
FLEXIBLE REC  
SETUP  
Manual  
Auto-Setup Restart  
2
Use [3, 4] (10) to select the “Settings” tab and  
press [2] or [1] (10).  
Tuning  
Settings  
Disc  
Picture  
Sound  
Display  
(DMR-E51GCS)  
(DMR-E50GN)  
SELECT  
SETUP  
SETUP  
TAB  
Remote  
DVD 1  
Remote  
Clock  
DVD 1  
ENTER  
Connection  
RETURN  
Clock  
Shipping Condition  
Country  
Others  
Tuning  
Settings  
Disc  
Picture  
Sound  
Tuning  
Settings  
Disc  
Picture  
Sound  
4
Use [3, 4] (10) to select the TV station that you  
want to tune and press [ENTER] (10).  
The TUNING BOX screen appears.  
Shipping Condition  
Tab  
SELECT  
Tab  
SELECT  
Display  
Connection  
Display  
Connection  
(DMR-E51GCS)  
(DMR-E50GN)  
RETURN  
RETURN  
Manual Tuning  
Manual Tuning  
3
4
Use [3, 4] (10) to select “Clock” and press  
[ENTER] (10).  
Pos Name Ch  
Pos Name Ch  
Pos Name Ch  
Pos Name Ch  
1
2
3
4
5
6
7
8
9
ARD  
ZDF  
N3  
HR3  
BR3  
4
2
5
8
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
1
2
3
4
5
6
7
8
9
ARD  
ZDF  
N3  
HR3  
BR3  
4
2
5
8
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Clock  
SELECT  
SELECT  
ENTER  
ENTER  
RETURN  
Move  
RETURN  
Move  
Add  
Time:  
Date:  
1
10  
10  
Delete  
A
Delete  
Add  
B
15  
:
45  
:
39  
.
8
.
2006  
C
D
A
B
C
D
No.  
0
9
Please set clock.  
CHANGE SELECT  
Pos  
Name  
Channel  
1
ARD  
4
Pos  
Name  
Channel  
1
ARD  
4
ENTER  
:
access , RETURN  
:
leave  
Manual  
Tuning  
Manual  
Tuning  
ENTER  
RETURN  
Fine Tuning Auto  
Fine Tuning Auto  
Mono  
Off  
Audio mode  
Mono  
BG  
Off  
Use [2, 1] (10) to select the item you want to  
change.  
The items change as follows:  
CHANGE  
ENTER  
CHANGE  
ENTER  
RETURN  
9
RETURN  
9
0
0
Hour>Minute>Second>Day>Month>Year  
RETURN : leave  
ENTER store  
RETURN : leave  
ENTER store  
:
:
5
6
7
Use [3, 4] (10) to change the setting.  
You can also use the numeric buttons (4) for setting.  
Press [ENTER] (10).  
Handling the TUNING BOX screen  
Use [3, 4, 2, 1] (10) to select the desired field and  
press [ENTER] (10).  
The SETUP screen reappears and the clock starts.  
Press [RETURN] (23).  
Pos:  
To change the order in which the TV stations are assigned to the  
programme positions.  
Note  
In the event of a power failure, the clock will operate on its back  
up system for a minimum of 3 years.  
Press the numeric buttons (4) to enter the number of the desired  
programme position.  
Name:  
To enter or change the name of a TV station.  
Use [3, 4, 2, 1] (10) to enter station name and press [ENTER]  
(10).  
If the station name needs a blank space, select the blank  
between [Z] and [¢].  
Channel:  
To enter newly available TV stations or change the channel  
number of an already tuned TV station.  
Press the numeric buttons (4) to enter the channel number of the  
desired TV station.  
Wait a few moments until the desired TV station has been tuned.  
After the desired TV station is tuned, press [ENTER] (10).  
Fine Tuning:  
To obtain the best tuning condition.  
Use [3, 4] (10) to obtain the best tuning condition.  
If you do not want to change the tuning condition, Use [1] (10)  
to return to the original condition [Auto].  
Download from Www.Somanuals.co5m6. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Audio mode: (DMR-E51GCS only)  
To select Audio mode then select the broadcasting system.  
Use [3, 4] (10) to select “BG”, “I”, or “DK”.  
List of TV Reception Channels  
For DMR-E51GCS  
SYSTEM  
VHF  
UHF  
CATV  
BG: PAL B.G.H  
I:  
PAL I  
S01-S05  
M1-M10  
U1-U10  
S21-S41  
DK: PAL D.K.K1  
B
G
CCIR Standard  
(B.G.H)  
E2-E12  
E21-E69  
Mono:  
To select the type of sound to be recorded.  
Use [3, 4] (10) to select “Off”.  
Select “On” if the stereo sound is distorted due to inferior  
reception conditions, or if you want to record the normal (mono)  
sound during a stereo, bilingual or NICAM broadcast.  
Hong kong Special  
Administrative  
Region of China (I)  
I
s
21-69  
s
5
Press [RETURN] (23).  
OIRT (D.K.K1)  
China (D)  
R1-R12  
1-12  
21-69  
13-57  
44-470MHz  
Z1-Z35  
D
K
Adding, deleting and moving channels  
Use this function if:  
Channels were not set correctly using automatic tuning.  
A channel that should have been set wasn’t.  
A channel’s reception is poor and you want to delete it.  
For DMR-E50GN  
Country  
VHF  
0-12  
1-11  
UHF  
CATV  
Preparations  
Australia  
28-69  
21-69  
45-470MHz  
44-470MHz  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
New Zealand  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
The SETUP screen appears.  
Auto-Setup Restart  
You can use the SETUP menus to start Auto Channel setting if  
Auto Setup (page 12) fails for some reason.  
2
3
Use [3, 4] (10) to select the “Tuning” tab and  
press [2] or [1] (10).  
Use [3, 4] (10) to select “Manual” and press  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
[ENTER] (10).  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
SETUP  
Manual  
Auto-Setup Restart  
The SETUP screen appears.  
Tuning  
Settings  
Disc  
Picture  
Sound  
2
Use [3, 4] (10) to select the “Tuning” tab and  
press [2] or [1] (10).  
SETUP  
Manual  
SELECT  
Display  
TAB  
ENTER  
Connection  
RETURN  
Auto-Setup Restart  
Tuning  
Settings  
Disc  
Picture  
Sound  
4
Use [3, 4, 2, 1] (10) to select the desired TV  
station and use the [A], [B], [C] buttons ((29), (28),  
(33)) to select “Delete”, “Add”, “Move”.  
SELECT  
Display  
TAB  
ENTER  
Connection  
Manual Tuning  
RETURN  
Pos Name Ch  
Pos Name Ch  
1
2
ARD  
ZDF  
N3  
4
2
5
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
3
4
Use [3, 4] (10) to select “Auto-Setup Restart” and  
press [ENTER] (10).  
A message appears asking you to confirm the operation.  
Use [2] (10) to select “Yes” and press [ENTER]  
(10).  
3
4
5
HR3  
BR3  
8
10  
6
7
8
9
SELECT  
ENTER  
RETURN  
Move  
10  
Delete  
Add  
A
B
C
D
Auto Setup starts. This takes about 5 minutes.  
Follow the operations below.  
The clock setting menu appears after Auto Setup  
finishes  
To delete a programme position “Delete”:  
Press [A] (29).  
(1) Use [3, 4, 2, 1] (10) to set the correct time and date.  
(2) Press [ENTER] (10) to conclude the setting.  
To insert a blank programme position “Add”:  
Press [B] (28).  
To move a TV station to another programme position “Move”:  
Press [C] (33), and then use [3, 4] (10) to select the new  
programme position to which you want to assign the TV station.  
Press [ENTER] (10).  
5
Press [RETURN] (23).  
Note  
Setting can take up to 3 minutes approximately.  
Hint  
If you have performed Manual Tuning to enter TV stations, the  
[jj] indication may appear under [Pos/Name] on the display  
when programming a G-CODE timer recording.  
Download from Www.Somanuals.co5m7. All Manuals Search And Download.  
Changing the unit’s settings (continued)  
Country Settings  
(DMR-E50GN only)  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
The SETUP screen appears.  
2
3
Use [3, 4] (10) to select the “Settings” tab and  
press [2] or [1] (10).  
Use [3, 4] (10) to select “Country” and press  
[ENTER] (10).  
Country  
Australia  
New Zealand  
Others  
SELECT  
ENTER  
RETURN  
RETURN  
:
leave ENTER  
:
access  
4
5
Use [3, 4] (10) to select the desired country and  
press [ENTER] (10).  
Press [RETURN] (23).  
Shipping Condition  
The all settings in the SETUP screen return to the factory settings.  
(except for the ratings level and the password)  
Preparations  
Switch [DVD, TV] (15) to “DVD”.  
Press [FUNCTIONS] (11) to show the FUNCTIONS window.  
1
Use [3, 4, 2, 1] (10) to select “SETUP” and press  
[ENTER] (10).  
The SETUP screen appears.  
2
3
Use [3, 4] (10) to select the “Settings” tab and  
press [2] or [1] (10).  
Use [3, 4] (10) to select “Shipping Condition” and  
press [ENTER] (10).  
SETUP  
Shipping Condition  
Warning—all stored  
tuning data will be lost !  
Do you want to proceed ?  
Tuning  
Settings  
Disc  
Picture  
Sound  
Yes  
No  
Display  
Connection  
ENTER  
RETURN  
4
5
Use [2, 1] (10) to select “Yes” and press [ENTER]  
(10).  
Use [2, 1] (10) to select “Yes” and press [ENTER]  
(10).  
Download from Www.Somanuals.co5m8. All Manuals Search And Download.  
Status displays  
Changing the information displayed  
Display examples  
Displays appear on the television when you operate the unit to let  
you know what operation was performed and what condition the  
unit is in.  
DVD-RAM  
REC  
PLAY  
(1)  
(2)  
(3)  
(4)  
Stereo  
LR  
Remote control only  
(1) Current media  
Preparation  
(2) Current recording or play status, input channel  
Shows the current state of the unit, and the input channel.  
REC: Recording  
Switch [DVD, TV] (15) to “DVD”.  
Press [STATUS] (28) to change the information  
displayed.  
PAUSE: Recording paused  
The display changes each time you press the button.  
PLAY: Playing  
For example, DVD-RAM  
PLAY t1.3: Quick Viewing (Play k1.3)  
;: Playing Paused  
5: Fast forwarding (5 speeds)  
6: Rewinding (5 speeds)  
DVD-RAM  
REC  
F: Slow-motion (5 speeds)  
PLAY  
G: Reverse slow-motion (5 speeds)  
(3) Audio type  
LR  
Shows the selected audio type.  
Stereo: a stereo broadcast is being received  
M1/M2: a multiple audio broadcast is being received  
M1: a NICAM monaural broadcast is being received  
(4) Sound mode  
0:07:21 6.8.  
π Remain  
0:50 XP  
DVD-RAM  
REC  
PLAY  
π PRG2 0:05.14 XP  
π PRG1 0:00.10 SP  
LR, L, R: when you have changed the audio with the remote  
control’s [AUDIO] (31)  
LR  
Bit Rate  
π REC 5.4Mbps XP  
π PLAY 3.1Mbps SP  
DVD-RAM  
REC  
PLAY  
0 . . . . 5 . . . . 10  
(5)  
(6)  
(7)  
(8)  
0:07:21 6.8.  
π Remain  
0:50 XP  
π PRG2 0:05.14 XP  
π PRG1 0:00.10 SP  
LR  
(9)  
No display  
(5) Available recording time and recording mode  
(e.g.: “0:50 XP” indicates 50 minutes in XP mode)  
(6) The current date and time  
(7) Recording time  
Shows recording time, recording mode and a rough guide to  
how much space has been used for recording on the disc.  
(8) Elapsed play time  
(9) Play position  
Bit Rate  
0
.
.
.
.
5
.
.
.
.
10  
(10)  
(11)  
π
REC 5.4Mbps XP  
π PLAY 3.1Mbps SP  
(12)  
(10)Video bit-rate when recording  
(11)Video bit-rate when playing  
(12)Bit-rate display  
Shows as Mbps (Mega-bit per seconds) during play and  
recording, or kbit (kilobit) while paused.  
The method of calculating bit-rate for recording and playing is  
different so there may be differences in the figures displayed.  
(Values are approximate.)  
For your reference  
These displays may not be shown if “On-Screen Messages” in  
the “Display” menu is set to “Off” (page 53). If set to “Automatic”,  
displays (1), (2), (3) and (4) appear for 5 seconds and then  
disappear.  
Download from Www.Somanuals.co5m9. All Manuals Search And Download.  
Maintenance and Handling  
Maintenance  
To clean this unit, wipe with a soft, dry cloth.  
Never use alcohol, paint thinner or benzine to clean this unit.  
Before using chemically treated cloth, read the instructions that came with the cloth carefully.  
Dust and dirt may adhere to the unit’s lenses over time, possibly making it impossible to record or play discs.  
Use the recommended DVD-RAM/PD lens cleaner (LF-K123LCA1) every 1 to 4 months, depending on frequency of use and the operating  
environment.  
Read the lens cleaner’s instructions carefully before use.  
The lens cleaner may make some sound during use but this does not indicate a malfunction.  
“NO READ” appears on the unit’s display when cleaning finishes.  
The precision parts in this unit are readily affected by the environment, especially temperature, humidity and dust.  
Observe the following points to ensure continued listening and viewing pleasure.  
Disc handling  
Do not use irregularly shaped discs, such as heart-shaped.  
(These can damage the unit.)  
ªHow to hold a disc  
Do not touch the recorded surface.  
ªIf there is dirt or condensation on the disc  
If the disc is dirty, wipe with a damp cloth and then wipe dry.  
Moisture may condense on discs after they are brought inside from the cold.  
DVD-RAM and DVD-R  
Clean and dry with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1, where available). Do not use cleaners or clothes for CDs to  
clean DVD-RAM and DVD-R.  
Never use cloths or cleaners for CDs, etc.  
DVD-Video, Video CD and CD  
Wipe it with a damp cloth and then wipe dry.  
ªHandling precautions  
Do not write on the label side with a ball-point pen or other writing instrument.  
Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.  
Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.)  
Do not use scratch-proof protectors or covers.  
Do not use discs printed with label printers available on the market.  
Do not use discs that are badly warped or cracked.  
ªDo not place or store discs in the following places  
Locations exposed to direct sunlight  
Humid or dusty locations  
Locations directly exposed to a heat vent or heating appliance.  
Download from Www.Somanuals.co6m0. All Manuals Search And Download.  
Glossary  
A frame still is made up of two alternating fields, so the picture  
Bitstream  
may appear blurred, but overall quality is high.  
A field still is not blurred, but it has only half the information of a  
frame still so picture quality is lower.  
This is the compressed form of digital signals. A decoder decodes  
these signals into 5.1 surround and multi-channel signals.  
Channel (when referring to DVD)  
Sound is divided into channels based on the sound’s role.  
For example, 5.1 channel  
Front speakers—1 left channel and 1 right channel  
Center speaker—1 channel  
Surround speakers—1 left channel and 1 right channel  
Subwoofer—1 channelk0.1 (the ratio of bass to the total amount  
of sound output)  
Interlace and progressive output  
NTSC has 480 interlaced (i) scan lines, whereas progressive  
scanning uses twice the number of scan lines. This is called 480p.  
The video signals output from this unit’s COMPONENT VIDEO  
OUT terminals (Y, PB, PR) allow you to enjoy higher quality pictures  
than if the signals were output from the VIDEO OUT terminal or S-  
VIDEO OUT terminal.  
Examples as shown in the status display  
Linear PCM  
3/2 .1 ch  
This is a form of signal that has been digitized without compressing  
it. CDs are recorded with 44.1 kHz/16 bit PCM, while DVDs use  
PCM between 48 kHz/16 bit and 96 kHz/24 bit, allowing  
reproduction of greater quality sound.  
The linear PCM signals output from the DIGITAL AUDIO OUT,  
OPTICAL terminal are stereo (2 channel).  
(1)  
(2)  
(3)  
(1) 1: Subwoofer signal  
(not displayed if there is no subwoofer signal)  
(2) 0: No surround  
1: Mono surround  
2: Stereo surround (left/right)  
(3) 1: Center  
NICAM (NICAM Broadcasting System)  
This is a 2 channel sound broadcast system which in most  
instances provides high quality stereo sound. Broadcasters can  
also transmit two separate mono soundtracks on this system.  
2: Front leftiFront right  
3: Front leftiFront rightiCenter  
Pan&Scan/Letterbox  
In general, DVD-Video are produced with the intention that they be  
viewed on a widescreen television with an aspect ratio of 16:9.  
This means you can view most material with the intended aspect  
ratio on a widescreen television.  
Material with this ratio will not fit onto a standard television with an  
aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and  
“Letterbox”, deal with this problem.  
DIRECT NAVIGATOR  
This is a list of programmes you have recorded. You can select  
programmes from the list to view. The list also shows the date and  
time of recording, the channel, and the titles of titled programmes.  
The selected programme is played in the background, making  
selection even simpler.  
Pan&Scan:  
The sides are cut off so the picture fills the screen.  
Dolby Digital  
This is a method of coding digital signals developed by Dolby  
Laboratories. Apart from stereo (2 channel) audio, these signals  
can also be 5.1-channel audio. A large amount of audio  
information can be recorded on one disc using this method.  
Letterbox:  
Black bands appear at the top and bottom of the  
picture so the picture itself appears in an aspect  
ratio of 16:9.  
Dolby Pro Logic  
A surround system where a 4-channel audio track is recorded as  
2 channels and then is restored to 4 channels for play. The  
surround channel is monaural.  
DTS Digital Surround  
This surround system is used in many movie theaters around the  
world. The separation between channels is good and the  
compression ratio is low, so realistic sound effects are possible.  
DTS soundtracks are produced with the assumption that all  
channels will be used.  
Playback control (PBC)  
This is a method of playing Video CDs. You can select parts to  
play by using menus recorded on the disc.  
PLAY LIST  
This is a collection of scenes. It enables you to play these scenes  
in succession or to select specific ones to play.  
Film and video  
DVD-Video are recorded using either film or video. Usually, film is  
recorded at 24 frames per second, the rate movies are filmed at,  
while video is recorded at 30 frames per second.  
Programme (PRG)  
The section between the point where recording is started and the  
point where it is stopped.  
Finalize  
This process allows DVD-R to be played on compatible equipment.  
Sampling frequency  
This is the number of samples of sound taken per second during  
conversion to a digital signal. A high sampling frequency results in  
a sound close to the original when played back.  
Frame and field  
Frames are the still pictures that go together to make a moving  
picture. A frame is made up of 2 fields.  
S-video output  
Frame  
Field  
Field  
The colour and luminance signals are separated before being sent  
to the television, making for greater picture clarity.  
+
=
Download from Www.Somanuals.co6m1. All Manuals Search And Download.  
Glossary (continued)  
Title/Chapter (DVD-Video)  
DVD-Video are divided up into large sections, titles, and smaller sections, chapters. The numbers allocated to these sections are called title  
numbers and chapter numbers.  
Example  
(2)  
(1)  
(5)  
(4)  
(3)  
(4)  
(3)  
(1) Title 1  
(2) Title 2  
(3) Chapter 1  
(4) Chapter 2  
(5) Chapter 3  
Track  
This is the smallest division on CD, and Video CD, and usually equates to a single song.  
Example  
(1)  
(2)  
(3)  
(4)  
(5)  
(1) Track 1  
(2) Track 2  
(3) Track 3  
(4) Track 4  
(5) Track 5  
Download from Www.Somanuals.co6m2. All Manuals Search And Download.  
Self-diagnosis  
The self-diagnosis displays appear if a problem occurs with the unit.  
The service numbers in the table appear when a problem occurs.  
The service numbers are a “U” followed by two digits.  
Service number  
Service  
number  
Unit status  
Solutions  
NO READ  
The disc is dirty or badly  
scratched.  
Follow the instructions in “Maintenance and Handling” to clean the disc if it is dirty.  
(page 60)  
The disc cannot be played if it is scratched and this display doesn’t disappear.  
It can not be read for the  
disk which doesn’t cope  
with it.  
It can not be read for the disk which doesn’t cope with it. Exchange a disk.  
Take the cleaner out of the unit.  
The DVD-RAM/PD lens  
cleaner has finished  
cleaning.  
UNSUPPORT  
U14  
You have inserted a disc  
the unit cannot play or  
record on.  
Insert a disc the unit can play or record on. (page 8)  
The unit is hot.  
The unit switches to standby automatically for safety reasons and you cannot operate it.  
Wait for about 30 minutes for the service number to disappear.  
Select a position with good ventilation when installing the unit.  
Do not block the cooling fan on the rear of the unit.  
U99  
The unit fails to operate  
properly.  
Press [Í/I] (1) to switch the unit to standby. Now press [Í/I] (1) again to turn the unit  
on.  
REMOTE  
DVD  
The remote control code is  
wrong.  
Change to the correct code. (page 55)  
RECOVER  
A power failure occurred  
or the AC mains plug was  
disconnected while the  
power was ON.  
The unit is carrying out its recovery process. Wait until the message disappears.  
Download from Www.Somanuals.co6m3. All Manuals Search And Download.  
Error displays  
Error messages  
No Disc.  
Causes and solutions  
You haven’t inserted a disc. Correctly insert a disc that this unit can play. (page 13)  
The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.  
(page 13)  
This is a non-recordable disc.  
Cannot record.  
The unit cannot record on the disc you inserted. The unit cannot record onto finalized  
DVD-R, DVD-Video, CDs or Video CDs.  
This disc is not properly formatted.  
Formatting is necessary using DISC  
INFORMATION.  
Insert a DVD-RAM or unfinalized DVD-R. (page 8)  
You inserted an unformatted DVD-RAM.  
Format the disc with this unit. (page 31)  
This disc cannot be read.  
You inserted an incompatible disc. (page 13)  
Please check write protect tab on the  
disc.  
The write protect tab on the cartridge is set to  
“PROTECT”.  
Use a ballpoint pen or similar to release the  
write protection.  
PROTECT  
Contents of this disc are protected.  
Cannot finish recording completely.  
Cannot record on the disc.  
The programme is write-protected.  
Release the protection with the direct navigator. (page 35)  
The disc is write-protected.  
Release the protection with the disc protection sub menu of DISC INFORMATION.  
(page 30)  
The programme was copy-protected.  
TV system of the programme was different from the setting in SETUP, so the timer  
recorded was not completed.  
The disc is full.  
Recording was not completed for some other reason.  
The disc is scratched. Use another disc.  
The disc is dirty. Clean the disc as described in these operating instructions. (page 60)  
Cannot record to the disc.  
TV system of the programme or the input signal was different from the setting in SETUP.  
TV system of input signal is different to  
the setting in SETUP.  
Disc is full.  
No space left on the disc.  
Create space by erasing any unwanted programmes. (page 34)  
Use a new disc.  
Please set clock.  
The clock is not set correctly. Reset the clock using “Clock Settings”. (page 56)  
This disc may not be played in your  
region.  
You tried to play a disc with a region number different from this unit’s region number.  
This unit can play only play discs with the region numbers compatible with this unit.  
(page 8)  
Your selection exceeds the recorder’s  
rating limit.  
A ratings level has been set for DVD-Video with this unit. Temporarily unlock the unit  
with “Ratings” in the disc menu. (page 54)  
Error has occurred.  
Please press ENTER.  
You can operate the unit using the [ENTER] (10) only.  
After you press the [ENTER] (10), turn off the unit and then turn it on. Recovery starts.  
Please check the disc.  
Please change the disc.  
Check the discs for dirt or scratches. (page 60)  
You can operate the unit using the [<, OPEN/CLOSE] (27) only.  
Press [<, OPEN/CLOSE] (27) to open the tray and eject a disc, the unit becomes off.  
To continue play or recording, insert an another disc.  
Finalizing is necessary for compatible  
playback.  
To enable playback of your DVD-R on compatible equipment, it is necessary to finalize  
it. (page 32)  
Please check write protect tab.  
Release the protection on the DVD-RAM.  
Download from Www.Somanuals.co6m4. All Manuals Search And Download.  
Troubleshooting guide  
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart  
do not solve the problem, consult your dealer for instructions.  
Power  
No power  
Insert the AC power supply cord securely into the household AC outlet.  
The unit is on but cannot be  
operated.  
The unit is hot (“U14” appears on the display).  
Wait for “U14” to disappear.  
One of the unit’s safety devices may have activated.  
Reset the unit as follows:  
(1) Press [Í/I] (1) on the main unit to switch the unit to standby.  
If the unit doesn’t switch to standby, press and hold [Í/I] (1) for about 10 seconds. The  
unit is forcibly switched to standby.  
Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.  
(2) Press [Í/I] (1) to turn the unit on.  
The unit switches to standby  
automatically.  
One of the unit’s safety devices may have activated.  
Press [Í/I] to turn the unit on.  
Picture  
No picture.  
Make sure the television’s input setting (e.g., AV1) is correct. (pages 10 and 11)  
You have set “Progressive (NTSC)” to “On” in the Connection menu, but the television is not  
compatible with progressive signals. Press [] (7) and [TIME SLIP] (25) on the unit at the same  
time for about 5 seconds. The setting will change to interlace.  
Television reception worsens  
after connecting the unit.  
This can occur because the signals are being divided between the unit and the television.  
It can be solved by using a signal booster, available from audio-visual suppliers.  
Consult your dealer if reception does not improve.  
Screen size is wrong.  
The picture flickers.  
Check the settings on your television.  
Check the settings for “TV Aspect”, “Norm (4:3) TV Settings (DVD-Video)” or “Norm (4:3) TV  
Settings (DVD-RAM)” in the Connection menu. (pages 12 and 53)  
Adjust the television’s vertical hold. Read the television’s operating instructions or consult your  
dealer.  
On-screen messages do not  
appear.  
Go to Display in the SETUP menus and select “Automatic” for “On-Screen Messages”. (page 53)  
Press [STATUS] (28) to show the on-screen messages constantly.  
The grey background does not  
appear.  
Go to Display in the SETUP menus and select “On” for “Grey Background”. (page 53)  
Progressive video  
There is ghosting when you  
progressive output is on.  
Set “Progressive” to “OFF”. This problem is caused by editing method or material used on  
DVD-Video, but should be corrected if you use interlace out put. (page 44)  
There is no apparent change in  
picture quality when adjusted  
with the Video menu in the on-  
screen menus.  
The effect is less perceivable with some types of video.  
Sound  
No sound.  
Check the connections. (pages 10 and 11)  
Low volume.  
Distorted sound.  
Check the input mode on the amplifier if you have connected one. (pages 46, 47 and 54)  
Turn V.S.S. to “OFF” if it causes distortion. (page 44)  
Cannot hear the desired audio  
type.  
Press [AUDIO] (31) on the remote control to select the desired audio type. (page 16)  
[DVD-R]  
Go to Sound in the SETUP menus and choose the correct setting with “Bilingual Audio  
Selection”. (page 52)  
Cannot switch audio during  
stereo or NICAM broadcasts.  
You have used digital connection. Connect to other equipment using audio cables (analog  
connection). (pages 10, 11 and 47)  
You cannot change the audio type when using DVD-R.  
Download from Www.Somanuals.co6m5. All Manuals Search And Download.  
Troubleshooting guide (continued)  
Displays  
The display is dim.  
Go to Display in the SETUP menus and change the display’s brightness with “FL Display”.  
(page 53)  
“0:00” is flashing on the unit’s  
display.  
The clock is not set.  
Go to Settings in the SETUP menus and set the clock with “Clock”. (page 56)  
“NO READ” appears on the unit’s  
display after using a lens cleaner.  
Take the cleaner out of the unit.  
Play  
Play fails to start even when [1]  
(21) is pressed.  
Play starts but then stops  
immediately.  
Insert the disc correctly with the label facing up. (page 13)  
This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and MP3  
disc. (page 8)  
The disc is dirty. Clean it. (page 60)  
“NO READ”, “UNSUPPORT”, “NO  
DISC” or “NO PLAY” appears on  
the unit’s display.  
The disc may be badly scratched. (page 60)  
You inserted a blank DVD-RAM or DVD-R.  
No response when buttons  
pressed.  
If “ ” appears on the television  
the operation is prohibited by the unit or disc.  
If the unit is not operating at all, press [ , TIMER] (12) to switch the unit to standby, then press  
[
, TIMER] (12) again to turn the unit on. The unit may not be operating correctly due to  
lightning, static electricity, or some other external factor.  
The Child Lock function is activated. (page 46)  
A title or chapter doesn’t play  
when it is selected.  
Some titles and chapters on DVD-Video are not played when you have changed the ratings  
level. (page 54)  
Picture distorted during search.  
Some distortion is normal.  
Alternative soundtrack and  
subtitles cannot be selected.  
The languages are not recorded on the disc.  
You may have to use the disc’s own menus to select languages.  
Soundtrack/subtitle language not  
the one selected with the SETUP  
menus.  
The language is not recorded on the disc. (page 51)  
No subtitles.  
Subtitles are not recorded on the disc.  
Turn the subtitles on. (page 43)  
Angle cannot be changed.  
This function depends on software availability. Angles can only be changed during scenes where  
different angles are recorded (“  
” appears on the display).  
You have forgotten your ratings  
password.  
Return the unit's settings to the initial state (factory setting).  
With the tray open, keep pressing [:/6] and [5/9] (42) on the main unit  
simultaneously for 5 or more seconds.  
Remote control  
The remote control doesn’t work.  
The unit is on standby to make a timer recording (“ ” on the unit’s display is on). (page 24)  
[DVD, TV] (15) is not switched to “DVD”.  
Switch to “DVD” when operating this unit. (page 7)  
The remote control code is wrong.  
Change to the correct code. (page 55)  
The batteries are depleted. Replace them with new ones. (page 7)  
Point the remote control at the remote control sensor on the main unit. (page 7)  
Remove obstacles from between the remote control and main unit.  
The Child Lock function is activated. (page 46)  
Cannot operate the television.  
The remote control code is wrong.  
Change to the correct code. Some televisions cannot be operated even if you change the code.  
(page 7)  
[DVD, TV] (15) is not switched to “TV”.  
Switch to “TV” when operating the television. (page 7)  
Download from Www.Somanuals.co6m6. All Manuals Search And Download.  
Troubleshooting guide (continued)  
Recording and timer recording  
Cannot record.  
You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit  
can record onto. (page 8)  
The disc is unformatted.  
Format the disc so this unit can record on it. (page 31)  
The write protect tab on the cartridge is set to “PROTECT”.  
Use a ballpoint pen or similar to release the write protection. (page 64)  
Recording is not possible unless you set “Disc Protection” in “DISC INFORMATION” to “Off”.  
(page 30)  
The disc is full or nearly full.  
Delete unneeded programmes or use another disc. (page 34)  
The material you are trying to record is copy-guarded.  
Tired to record to a DVD-R that has already been finalized.  
G-CODE programming does not  
work properly.  
The clock is wrong.  
Go to Settings in the SETUP menus and correct the clock with “Clock”. (page 56)  
If “– –” appears under “Name”  
after entering a G-CODE number  
Use [3, 4] (10) repeatedly to select the programme position on which the TV programme to be  
recorded will be broadcast. (page 25)  
Timer recording does not work  
properly.  
The timer programme is incorrect.  
Make corrections to the programme and check them when you are finished. (pages 25 and 26)  
The unit is not on standby for timer recording. (“ ” on the unit’s display is not on.)  
Different timer programme times overlap. (page 24)  
The clock is wrong.  
Go to Settings in the SETUP menus and correct the clock with “Clock”. (page 56)  
The unit switches to standby  
while making a timer recording.  
The unit switches to standby while making a timer recording if the disc runs out of space.  
Use a disc that has enough space to record the programme.  
The timer programme remains  
even after recording finishes.  
The programme remains if you select weekly or daily setting. (pages 25 and 26)  
The available recording time  
doesn’t increase even after  
The available recording time does not increase if you erase data written to the disc with the  
DVD-RAM drive of a computer.  
erasing all recordings on the disc.  
Format the disc if necessary. (page 31)  
If the disc is dirty, wipe with the DVD-RAM/PD lens cleaner (optional) before formatting.  
Available recording space on the DVD-RAM does not increase even after erasing previously  
recorded programming.  
A part or whole of a recorded  
programme has been lost.  
If there is a power failure or the plug is disconnected from the household AC outlet while  
recording or editing, the programme may be lost or the disc may become unusable.  
)We cannot offer any guarantee regarding lost programmes or discs. You will have to format  
the disc or use a new disc.  
Cannot eject a disc.  
Press [DVD, Í] (1) to switch the unit off.  
Hold down [] (7) and [W, CH] (18) on the main unit simultaneously for about 5 seconds.  
If the Child Lock function is activated, above operation does not work.  
Discs make sounds as they rotate. This does not indicate a malfunction.  
Download from Www.Somanuals.co6m7. All Manuals Search And Download.  
Specifications  
Video  
Video System:  
Power supply:  
For Asia  
(DMR-E51GCS)  
PAL colour signal, 625 lines, 50 fields  
NTSC colour signal, 525 lines, 60 fields  
MPEG2 (Hybrid VBR)  
AV1/AV2/AV3 IN (pin jack)  
1 Vp-p 75 ohm, terminated  
AV1/AV2/AV3 IN (S connector)  
1 Vp-p 75 ohm, terminated  
OUT (pin jack)  
AC 220-240 V, 50/60 Hz  
For Australia and New Zealand  
(DMR-E50GN)  
AC 220-240 V, 50 Hz  
29 W (Approx. 4 W [Standby mode])  
Recording system:  
Video In:  
S-Video In:  
Video Out:  
S-Video Out:  
Power consumption:  
Recording system:  
DVD video recording standards  
(DVD-RAM),  
1 Vp-p 75 ohm, terminated  
OUT (S connector)  
DVD video standards (DVD-R)  
12 cm 4.7 GB DVD-RAM  
12 cm 9.4 GB DVD-RAM  
8 cm 2.8 GB DVD-RAM  
12 cm 4.7 GB DVD-R  
(for General Ver.2.0)  
8 cm 1.4GB DVD-R  
(for General Ver.2.0)  
Maximum 360 min (with 4.7 GB disc)  
XP: Approx. 60 min  
SP: Approx. 120 min  
LP: Approx. 240 min  
EP: Approx. 360 min  
12 cm 4.7 GB DVD-RAM  
12 cm 9.4 GB DVD-RAM  
8 cm 2.8 GB DVD-RAM  
12 cm 4.7 GB DVD-R  
(for General Ver.2.0)  
8 cm 1.4 GB DVD-R  
(for General Ver.2.0)  
DVD-Video  
1 Vp-p 75 ohm, terminated  
Recordable discs:  
Component video output  
(NTSC 480P/480I)  
(PAL 576I)  
Y:  
PB:  
PR:  
1.0 Vp-p 75 ohm, terminated  
0.7 Vp-p 75 ohm, terminated  
0.7 Vp-p 75 ohm, terminated  
Dimensions  
(W)t(H)t(D):  
Mass:  
Recording time:  
Playable discs:  
Approx. 430k79k283 mm  
Approx. 3.8 kg  
Operating  
Temperature:  
Operating  
5oC40oC  
Humidity range:  
10%80% RH (no condensation)  
LASER Specification  
Class 1 LASER Product  
Wave Length:  
775-815 nm, 655-666 nm  
No hazardous radiation is emitted with  
the safety protection  
Laser Power:  
CD-Audio (CD-DA)  
Video CD  
CD-R/RW  
(MP3, CD-DA, Video CD formatted  
discs)  
Note  
Mass and dimensions shown are approximate.  
Specifications are subject to change without notice.  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Audio  
Recording system:  
Audio In:  
Dolby Digital 2ch  
AV1/AV2/AV3 IN (pin jack)  
Standard: 0.5 Vrms  
Full scale: 2.0 Vrms at 1 kHz  
more than 10 kohm  
OUT (pin jack)  
Input Level:  
Input Impedance:  
Audio Out:  
Output Level:  
Standard: 0.5 Vrms  
Full scale: 2.0 Vrms at 1 kHz  
Output Impedance: less than 1 kohm  
Digital Audio Out:  
Optical terminal (PCM, Dolby Digital,  
DTS, MPEG)  
Television System  
Tuner System:  
For Asia  
(DMR-E51GCS)  
PAL BGH/I/DK  
For Australia and New Zealand  
(DMR-E50GN)  
PAL BGH  
RF Converter Output: Not provided  
Download from Www.Somanuals.co6m8. All Manuals Search And Download.  
Download from Www.Somanuals.co6m9. All Manuals Search And Download.  
Index  
ªA  
ªQ  
Audio ......................................................................................... 16  
Auto Setup .......................................................................... 12, 57  
Quick View (Play t1.3) .............................................................14  
ªR  
ªC  
Ratings ................................................................................51, 54  
Recording ...........................................................................19, 28  
Recording modes .......................................................................19  
Remaining time ..........................................................................20  
Repeat play ................................................................................45  
RESUME PLAY .........................................................................14  
Chasing play .............................................................................. 21  
Clock ......................................................................................... 56  
Connecting .................................................................. 10, 47, 53  
Country ............................................................................... 12, 58  
CREATE PLAY LIST ................................................................. 38  
ªD  
ªS  
DIRECT NAVIGATOR ........................................................ 33, 61  
Disc ........................................................................ 8, 13, 19, 60  
DISC INFORMATION ................................................................ 29  
Dolby Digital ........................................................... 9, 46, 54, 61  
DTS ........................................................................ 9, 46, 54, 61  
Search .......................................................................................14  
SETUP .......................................................................................50  
Simultaneous recording and play ..............................................21  
Slow-motion ...............................................................................14  
Subtitle ................................................................................43, 51  
ªE  
ªT  
Erase .................................................................................. 13, 34  
Time Slip .............................................................................15, 22  
Timer recording ..........................................................................24  
Title .......................................................................29, 34, 42, 62  
ªF  
Finalize ............................................................................... 32, 61  
Flexible recording mode ............................................................ 20  
Format ....................................................................................... 31  
Frame-by-frame ......................................................................... 14  
FUNCTIONS window ................................................................ 22  
ªW  
Watching the television while recording .....................................22  
Write protect tab ........................................................................64  
ªG  
G-CODE ....................................................................................... 24  
ªL  
Language .................................................................................. 43  
ªM  
Manual tuning ............................................................................ 56  
Marker ....................................................................................... 17  
MENU ........................................................................................ 13  
MP3 ........................................................................................... 18  
MPEG ........................................................................................ 54  
ªP  
PLAY ......................................................................................... 13  
PLAY LIST .......................................................................... 37, 61  
Progressive ................................................................. 48, 53, 61  
RQT6998-G  
F0403Ah0  
Matsushita Electric Industrial Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Multiquip Automobile Parts EM 70P User Manual
Muratec All in One Printer MFX 2350 User Manual
NeumannBerlin Microphone MM 2 User Manual
Niles Audio Home Theater System CM6HDFX User Manual
Nintendo Video Games 64327A User Manual
NordicTrack Home Gym 831145955 User Manual
Oster Hair Clippers 76110 78670 User Manual
Palsonic CRT Television 5179G User Manual
Panasonic Network Card AW PH360N User Manual
Parkside Soldering Gun PLBS 30 User Manual