DVD AUDIO/VIDEO PLAYER
Operating Instructions
Model No.
DVD-RA61
Region number supported
by this player
Region numbers are allocated to DVD players
and DVD-Video according to where they are
sold.
For the United Kingdom and
Continental Europe
≥The region number of this player is “2”.
≥The player will play DVD-Video marked with
labels containing “2” or “ALL”.
Example:
1
2
2
ALL
4
/
AUDIO VIDEO
For Asia
≥The region number of this player is “3”.
≥The player will play DVD-Video marked with
labels containing “3” or “ALL”.
Example:
2
3
3
ALL
6
For Australia and N.Z.
≥The region number of this player is “4”.
≥The player will play DVD-Video marked with
labels containing “4” or “ALL”.
Example:
2
4
4
ALL
6
For Russia
≥The region number of this player is “5”.
≥The player will play DVD-Video marked with
labels containing “5” or “All”.
Example:
2
3
5
ALL
5
[Only\for\the\United\Kingdom]
Note:
“EB” on the packaging indicates the United King-
dom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
EB
E
A EN EU
RQT6043-B
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Caution for AC Mains Lead
(For United Kingdom)
Getting started
(“EB” area code model only)
Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . . . . . . . 03
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Connection to a television . . . . . . . . . . . . . . . . . . . . . . . . . . 04
The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
Selecting TV screen type . . . . . . . . . . . . . . . . . . . . . . . . . . 05
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the re-
placement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark
If the plug contains a removable fuse cover you must ensure that
it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
Ï
or the BSI mark
Ì
on the body of the fuse.
Basic operations
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
Playing MP3 discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
Skipping chapters or tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Fast forward and rewind—SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . 09
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Starting play from a selected title or track . . . . . . . . . . . . . . . . . . . . . 09
Selecting groups to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Selecting still pictures—Page Skip . . . . . . . . . . . . . . . . . . . . . . . . . . 10
To enjoy even higher quality sound—AUDIO ONLY. . . . . . . . . . . . . 10
Enjoying virtual surround effects with 2 speakers or
G
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
headphones (ADVANCED SURROUND V.S.S.). . . . . . . . . . . . . . 10
Using headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
Advanced operations
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
Changing the play sequence . . . . . . . . . . . . . . . . . . . . . . . . 11
All group play/Program play/Random play . . . . . . . . . . . . . . . . . . . . 11
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
A-B repeat play/Repeat play/Marking places to play again—MARKER . . . . 12
Changing soundtracks, subtitle languages
and angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using Graphical User Interface (GUI) screens . . . . . . . . . . 14
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Unit information/Shuttle screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Home Theater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Entering a password (Ratings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Speaker setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the termi-
nal which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the ter-
minal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E,
BY THE EARTH SYMBOL Ó OR COLOURED GREEN OR
GREEN/YELLOW.
Reference
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and fol-
low the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
CLASS 1
LASER PRODUCT
Fuse cover
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
2. Replace the fuse and close or attach the fuse cover.
(The illustration shows the model for the
United Kingdom, Continental Europe and
Russia.)
Figure A
Figure B
Fuse
(5 ampere)
(Back of product)
Fuse
(5 ampere)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
∏
Remote
∏
Batteries . . . . . . .
2
∏
AC mains lead . . .
1
∏
Audio/video
[For\Australia\and\N.Z.]
(RJA0035-1X)
control . . . . . . . . .
(N2QAJB000018)
1
for remote control
[For\the\United\Kingdom]
(RJA0053-2X)
cable . . . . . . . . . . .
(VJA0788-D)
1
[For\others]
(RJA0019-2X)
G
Note
The included AC mains lead is for use with this unit only. Do not use it with other equipment.
Connection to a television
Although the audio on most DVDs is designed to be played through six speakers and this unit’s factory settings assume this setup, the following describes
connections that allow you to enjoy sound through your television’s speakers. To get the full benefit from the powerful 5.1-channel audio found on DVDs,
you should connect an amplifier and six speakers (➡ page 16).
Before connection
≥Disconnect the AC mains lead.
≥Refer to the television’s operating instructions.
Connection to AUDIO IN
also necessary (see left)
For the United Kingdom,
Continental Europe and Russia
[For\Australia.\N.Z.\and\Asia]
Connection to AUDIO IN
also necessary (see left)
Video cable
(not included)
SCART
VCR
AUDIO
IN
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
L
Y
R
P
P
B
R
red white yellow
S video cable
(not included)
21-pin SCART
cable
(not included)
COMPONENT
VIDEO OUT
Y
P
P
B
R
Audio/video cable (included)
red white yellow
FOR UNITED KING-
DOM ONLY
READ THE CAUTION
FOR THE AC MAINS
LEAD ON PAGE 3 BE-
FORE CONNECTION.
DIGITAL AUDIO OUT
PCM/BITSTREAM
AUDIO OUT
VIDEO
OUT
S
VIDEO
OUT
(
)
5.1ch
2ch
L
SURROUND
FRONT
L
CENTER
L
AV1
AV2
AC IN
~
OPTICAL
SUB-
WOOFER
R
R
R
SURROUND
FRONT
AC mains lead (included)
To household
mains socket
(The illustration shows the model for the United Kingdom, Continental Europe and Russia.)
S VIDEO OUT terminal
SCART terminal
The S-video terminal achieves a more vivid picture than the VIDEO OUT
terminal by separating the chrominance (C) and luminance (Y) signals.
(Actual results depend on the television.)
≥To improve picture quality, you can change the video signal output from
the AV1 terminal from “Video” to either “S-Video” or “RGB” to suit the type
of television you are using (➡ page 18, Video—AV1 Output).
≥You can also connect other equipment to AV2.
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference signals (PB/
PR) and luminance signal (Y) separately in order to achieve high fidelity in
reproducing colors.
Video
cassette
recorder
Satellite receiver
or decoder
This unit
≥The description of the component video input terminals depends on the
television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
SCART terminal
of television
AV1
AV2
AV1
AV2
VCR
TV
Connect Your Unit Directly To Your Television.
Do not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
not be played correctly due to the copy guard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote control
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly
in front of the unit.
Do not;
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
R6, AA, UM-3
≥take apart or short circuit.
1
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
2
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
G
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Selecting TV screen type
Preparation
Turn on the television and select the appropriate video input on the televi-
sion to suit the connections for the player.
OPEN/CLOSE
1
2
Press [Í] to turn on the unit.
Í
1
Press [SETUP] to show the menus.
P
3·4·5
Disc
SETUP
3, 4, 2, 1/
GROUP
PAGE
ENTER
MARKER
RETURN
ENTER
Audio
Subtitle
Menus
English
SUBTITLE
AUDIO
RETURN
Automatic
English
SKIP
SLOW/SEARCH
SELECT
STOP
PAUSE
PLAY
Ratings
Level 8
1
4
2
5
8
0
3
6
3
4
Move [2, 1] to select the “Video” tab.
Move [3, 4] to select “TV Aspect” and press
[ENTER].
7
9
>
CANCEL
10
=
AUDIO
ONLY
HP-V.S.S.SP-V.S.S.
REPEAT
ANGLE
PLAY
5
Move [3, 4] to select the item and press [ENTER].
A-B
SETUP
MODE REPEAT MODE
≥4:3 Pan&Scan (Factory preset)
≥Select if you have a regular television and
to view 16:9 software in the pan and scan
style.
SETUP
2·6
16:9 software prohibited from being shown in the pan and scan
style will appear in the letterbox style despite the setting here.
≥4:3 Letterbox
≥Select if you have a regular television and
to view 16:9 softwarein the letterbox style.
≥16:9
≥Select if you have a widescreen (16:9) television.
≥Use the television’s screen modes to change the way the picture is
shown.
Remote control only
Change the setting to suit your television.
The menu language is set to English, but you can change it
(➡ page 18, Display—Menu Language). English is used in the
examples.
6
Press [SETUP] to end the settings.
To return to the previous screen
Press [RETURN].
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
Page
1
Standby/on switch (Í/I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
Display button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
OPEN/CLOSE
1
2
?
@
A
2
3
4
5
6
7
8
9
:
;
<
P
Top menu button (TOP MENU) . . . . . . . . . . . . . . . . . . . . . . . . . .
Joystick (3, 4, 2, 1)/Enter button (ENTER) . . . . . . . . . . . . . .
Group button (GROUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page button (PAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Skip buttons (:, 9 SKIP) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stop button (∫ STOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Numbered buttons (1–9, 0, S10) . . . . . . . . . . . . . . . . . . . . . . . . .
Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Headphone and Speaker V.S.S. buttons
7
5
9
3
4
5
GROUP
PAGE
ENTER
MARKER
RETURN
B
6
SUBTITLE
AUDIO
7
8
C
D
SKIP
SLOW/SEARCH
9
7
7
9
STOP
PAUSE
PLAY
E
F
9
:
1
4
2
5
8
0
3
6
G
(HP-V.S.S., SP-V.S.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setup button (SETUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 19
Repeat mode button (REPEAT MODE) . . . . . . . . . . . . . . . . . . . . 12
7
9
>
CANCEL
=
>
?
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
10
=
;
<
G
AUDIO
ONLY
HP-V.S.S.SP-V.S.S.
REPEAT
ANGLE
PLAY
Open/Close button (< OPEN/CLOSE) . . . . . . . . . . . . . . . . . . . .
Menu button (MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
H
I
J
A-B
SETUP
MODE REPEAT MODE
=
>
Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5
Slow/Search buttons (6, 5 SLOW/SEARCH) . . . . . . . . . . .
Play button (1 PLAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pause button (; PAUSE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
7
7
Audio only button (AUDIO ONLY) . . . . . . . . . . . . . . . . . . . . . . . . 10
Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . . . . . 11
A-B repeat button (A-B REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . 12
1 K < G
L
? 5 8 M
Remote control signal sensor . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shuttle dial (6, 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
7
9
/
I
6
5
ADVANCED
SURROUND
AUDIO
ONLY
AUDIO VIDEO
/
OPEN/CLOSE
GROUP
:
9
S10
HP
V.S.S. SP
3
Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Headphone level control (PHONES) . . . . . . . . . . . . . . . . . . . . . . 10
FL Display
1
6
2
7
4
9
5
0
PHONES
8
MIN
MAX
Standby indicator (Í)
When the unit is connected to the AC mains supply, this indicator lights
up in standby mode and goes out when the unit is turned on.
N O
:
P
Q 9 F E
Buttons such as 5 function the same as the controls on the remote control.
Disc information
∫ Discs that can be played
∫ Discs that cannot be played
DVD-ROM, DVD-RAM, CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD,
SVCD, SACD, Divx Video Discs and Photo CD.
DVD-Audio
DVD-Video
DVD-R
Video CD
Audio CD
∫ DVDs that can be played
This unit has a Dolby Digital decoder so you can play
DVDs with this mark.
This unit has a DTS decoder so you can play DVDs with
this mark.
Indication used in instructions
[DVD-A] [DVD-V]
∫ DVD-R discs
[VCD]
[CD]
Panasonic DVD-R recorded and finalized on a Panasonic DVD video re-
corder are played as DVD-Video on this unit.
It may not be possible to play these discs in all cases due to the type of disc
or condition of the recording.
Do not use irregularly shaped discs (e.g. heart-shaped), as these can
damage the unit.
∫ Video systems
This unit can play both the PAL and NTSC video systems.
To view PAL or NTSC, however, your television must match the system
used on the disc.
PAL discs cannot be correctly viewed on an NTSC television.
NTSC can be correctly viewed on a PAL television by converting the video
signal to PAL 60 (➡ page 18, Video–NTSC Disc Output).
∫ Handling precautions
≥Do not write on the label side with a ball-point pen or other writing instru-
ment.
Playing DVDs and Video CDs
The producer of these discs can control how they are played so
you may not always be able to control play as described in these
operating instructions. Read the disc’s instructions carefully.
≥Do not use record cleaning sprays, benzine, thinner, static electricity pre-
vention liquids or any other solvent.
≥Do not attach labels or stickers to discs. (Do not use discs with exposed
adhesive from tape or left over peeled-off stickers.)
≥Do not use scratch-proof protectors or covers.
≥Do not use discs printed with label printers available on the market.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic play
Note
≥If “$” appears on the television
The operation is prohibited by the unit or disc.
≥The disc continues to rotate while the menu is displayed even after you
finish playing an item. Press [∫] when you finish to preserve the unit’s
motor and your television screen.
≥Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts.
If you turn the volume up on the television or amplifier, be sure to reduce
the volume again before playing other sources so that a sudden increase
in output does not occur.
OPEN/CLOSE
Í
<
2
1
P
TOP MENU
MENU
3, 4, 2, 1/
GROUP
PAGE
ENTER
MARKER
RETURN
ENTER
SUBTITLE
AUDIO
RETURN
SKIP
SLOW/SEARCH
∫ Auto standby
:
,
9
∫
STOP
PAUSE
PLAY
The unit switches to the standby mode after about 30 minutes in the stop
mode.
1
;
4
1
4
2
5
8
0
3
6
When a menu screen appears on the
television
Numbered
buttons
7
9
>
CANCEL
10
=
AUDIO
ONLY
[DVD-A] [DVD-V] [VCD]
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
A-B
Press the numbered buttons to select an item.
SETUP
MODE REPEAT MODE
To select a 2-digit number
B
Example: To select item 23, press [S10] ➡ [2] ➡ [3].
≥When playing DVDs, you can also use [3, 4, 2, 1] to select items.
Press [ENTER] to confirm your selection.
Play of the selected item now begins.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[9]: Shows the next menu.
[:]: Shows the previous menu.
[DVD-A] [DVD-V] [VCD] [CD]
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
Preparation
Turn on the television and select the appropriate video input on the televi-
sion to suit the connections for the player.
1
2
3
Press [Í] to turn on the unit.
Press [<] to open the disc tray.
Place the disc on the disc tray.
Resume function
[DVD-A] [DVD-V] [VCD] [CD]
The position you stopped play at is recorded by the unit when “!” is flash-
ing on the unit’s display.
While “!” is flashing on the unit’s display, press [1] (PLAY) to start play
from where you stopped it.
Label must face upward.
(With double-sided discs,
load so the label for the side
you want to play is facing up.)
If you are playing DVD-Video, the message “Press PLAY to Chapter Re-
view” or “Press PLAY to Preview Chapters” (for Asia) appears.
Press [1] (PLAY) while the message is displayed and the beginning por-
tions of each chapter up to the current one are played. Full play resumes
from the point where you stopped play.
(This feature works only within a title.)
4
Press [1] (PLAY).
The disc tray closes and play begins.
If you do not press [1] (PLAY), the message disappears and play starts
from where you stopped it.
∫ To stop play
Press [∫] (➡ Resume function at right).
To cancel
Press [∫] until “!” disappears from the unit’s display.
∫ To pause play
Press [;] during play.
Note
Press [1] (PLAY) to restart play.
≥The resume function does not work if the disc’s play time is not displayed.
≥The position is cleared when the disc tray is opened.
Playing CD-R and CD-RW
This unit can play CD-DA (digital audio) and video CD format audio
§
CD-R and CD-RW that have been finalized upon completion of
recording.
It may not be able to play some CD-R or CD-RW due to the condi-
tion of the recording.
§
Finalizing is a process that enables CD-R/CD-RW players to play
audio CD-R and CD-RW.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic play
root
Files in this example are
played in order from 004.mp3
to 013.mp3
001
004.mp3
005.mp3
006.mp3
OPEN/CLOSE
P
: Folder (Title)
003
2, 1/
ENTER
GROUP
PAGE
ENTER
MARKER
RETURN
011.mp3
012.mp3
013.mp3
GROUP
004.mp3–013.mp3:
File (Chapter)
SUBTITLE
AUDIO
002
SKIP
SLOW/SEARCH
:
,
9
6
,
5
STOP
PAUSE
PLAY
007.mp3
008.mp3
009.mp3
010.mp3
1
;
1
4
2
5
8
0
3
6
Numbered
buttons
7
9
>
CANCEL
10
=
CANCEL
How MP3 discs differ to CDs
AUDIO
ONLY
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
A-B
B
SETUP
MODE REPEAT MODE
A file is a single audio track and is treated as a chapter on this unit. A folder
(album) is treated as a title on this unit.
The display during play is different
TITLE TRACK CHAP
V.S.S.
BASS
CINEMA
PGMRND
DVD V CD
A-B
VIDEO MP3
The information displayed in the GUI screens is different
Total number of chapters
C
1/ 59
0 : 01
Playing MP3 discs
Chapter playing
Elapsed playing time
(cannot be changed)
MP3 refers to the type of music file that is compressed using MPEG audio
layer 3.
The method of specifying a chapter to play is different
Press [ENTER] after pressing the numbered buttons.
For example, to select chapter 23, press [2] ➡ [3] ➡ [ENTER].
You do not have to press [S10].
When making MP3 discs to play on this unit
Disc format
Conform to ISO9660 level 1 and level 2
Repeat play
You can repeat chapters or titles.
File format
MP3 files that have the suffix “.MP3” or “.mp3”.
Limitations on MP3 play
To play in a certain order
≥You cannot use program or random play.
≥The time information may not be displayed correctly.
Prefix the folder and file names with numbers with the same number of
digits at the time of recording.
≥If both MP3 and CD-DA data is recorded on the disc, only the data type
used for the first track is played.
≥It may take some time for play to start if the disc includes still picture data
or if there are many folders on the disc.
Files may not be recorded in the numbered order if the prefixes have differ-
ent numbers of digits, for example 1.mp3, 2.mp3, 10.mp3. Some writing
software may also cause recording to occur in a different order.
≥Noise may be output if a file is suffixed “.MP3” or “.mp3” but is not actually
an MP3 file.
≥This unit is not compatible with ID3 tags and packet-write format.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping chapters or tracks
Starting play from a selected title or track
[DVD-A] [DVD-V] [VCD] [CD]
[DVD-A] [DVD-V] [VCD] [CD]
During play or while paused
Press the numbered buttons to select the item.
Press [:] or [9].
≥Each press increases the number of skips.
To select a 2-digit number
Example: To select track 23, press [S10] ➡ [2] ➡ [3].
Play starts from the selected item.
Frame-by-frame viewing
[DVD-A] [DVD-V] [VCD]
Remote control only
While paused
Note
≥This works only when stopped with some discs.
≥This may not work with some discs.
Move [2] or [1].
The frame changes each time you move the joystick.
Selecting groups to play
[DVD-A]
≥The frames change in succession if you hold the joystick in position.
≥Pressing [;] also activates forward frame-by-frame.
The tracks on DVD-Audio are divided into groups. How these groups are
played differs with the disc so read the instructions that came with the disc
for further details.
Fast forward and rewind—SEARCH
B
1
Press [GROUP].
[DVD-A] [DVD-V] [VCD] [CD]
The group number changes
each time you press the button.
G
T
1
1
During play
Press [6] or [5].
Turn the shuttle dial [6, 5] on the main unit.
2
3
Press [ENTER].
Press the numbered buttons to select the track
number and press [ENTER].
The selected group and track begin to play.
≥Play starts again when you release the shuttle dial.
≥Audio will be heard during search for most discs. You can turn this audio
off if you want to (➡ page 18, Audio—Audio during Search).
Playing all the groups in succession (➡ page 11)
Slow-motion play
[DVD-A] [DVD-V] [VCD]
Playing bonus groups
While paused
Some discs contain bonus groups. To enjoy these groups you may have to
enter a password. Refer to the disc’s jacket.
1. Press [GROUP] to select the bonus group and press [ENTER].
2. Enter the 4-digit password with the numbered buttons and press
[ENTER].
Press [6] or [5].
Turn the shuttle dial [6, 5] on the main unit.
≥The picture stills again when you release the shuttle dial.
≥If you enter the wrong password, you can erase a digit by pressing
[CANCEL].
3. Press the numbered buttons to select a track and press [ENTER].
Notes
≥The speed of search and slow-motion increases up to 5 steps.
≥Press [1] (PLAY) to restart play.
≥The bonus group can be played as many times as you like after the pass-
word has been entered until the disc is removed from the unit.
≥You cannot move backwards with Video CD during frame-by-
frame and slow-motion.
≥Frame-by-frame and slow motion only work on the moving pic-
ture parts of DVD-Audio.
When playing Video CDs with playback control
Turning the shuttle dial or pressing buttons to perform SKIP,
search or slow-motion may take you to a menu screen.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic play
Enjoying virtual surround effects with
2 speakers or headphones (ADVANCED
SURROUND V.S.S.)
OPEN/CLOSE
[DVD-V] [VCD]
P
SP-V.S.S.: Dolby Digital, DTS, MPEG, Linear PCM, 2-channel or over
only
HP-V.S.S.: Dolby Digital, MPEG, Linear PCM, 2-channel or over only
3, 4, 2, 1/
ENTER
GROUP
PAGE
ENTER
MARKER
RETURN
SUBTITLE
AUDIO
PAGE
Use ADVANCED SURROUND V.S.S. (Virtual Surround Sound) to enjoy a
surround-like effect if you are using 2 front speakers or headphones.
If you are playing a disc with surround effects recorded on it, the effect is
broadened and sound seems to come from virtual speakers on either side.
During play
SKIP
SLOW/SEARCH
6
,
5
STOP
PAUSE
PLAY
1
1
4
2
5
8
0
3
6
Press [SP-V.S.S.] or [HP-V.S.S.].
Each time you press the button:
SP 1/HP 1: Natural effect
;
Numbered
buttons
7
9
>
CANCEL
10
=
CANCEL
SP 2/HP 2: Emphasized effect
;
SP OFF/HP OFF: Cancel (Factory preset)
AUDIO
ONLY
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
SP-V.S.S.
HP-V.S.S.
AUDIO ONLY
PLAY MODE
A-B
SETUP
MODE REPEAT MODE
B
Note
≥Advanced Surround will not work, or will have less effect with some discs,
even if you select “1” or “2”.
≥Turn off the surround sound effects on the equipment you have connect-
ed when using this effect.
≥Turn Advanced Surround off if it causes distortion.
≥Output from this unit will be in stereo (two channels) when Advanced
Surround is on.
Selecting still pictures—Page Skip
Optimum seating position
A
[DVD-A]
Speaker
Speaker
Remote control only
During play
OWhen using the
television’s speakersN
Distance Al
Press [PAGE].
The page changes each time you press the button.
3 to 4 times distance A
Television’s width
PAGE 1
Seating position
To enjoy even higher quality sound—
AUDIO ONLY
Using headphones
1
Set [PHONES] to “MIN” and connect the head-
phones (not included).
Headphone plug type: 6.3 mm stereo
[DVD-A] [DVD-V] [VCD] [CD]
You can enjoy higher quality audio by stopping the video signal.
Press [AUDIO ONLY].
≥The button on the main unit lights.
≥AUDIO ONLY is canceled if you press the button again or turn the unit off.
The light goes out.
1
PHONES
Note
MIN
MAX
2
≥Video signals are output while the disc is stopped and when operations
such as searching are performed. The television screen can appear un-
usual while video signals are not being output.
≥The television may be distorted when video signals are turned on and off
when you turn AUDIO ONLY on and off, but this is not a malfunction.
2
Adjust headphone volume with [PHONES].
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the play sequence
[DVD-A] [VCD] [CD]
All group play
Remote control only
While stopped
[DVD-A]
Press [PLAY MODE] to select the play mode.
The mode changes each time you press the button. Select the mode then
follow the procedures in the next column to start play.
Press [1] (PLAY).
Program play
All group play
[DVD-A]
1
2
Press [ENTER].
To play all the groups in succession
[DVD-Audio\only]
Move [3, 4] to select a group and press
All Group Playback
[ENTER].
If you select bonus groups, you will have to enter a 4-digit password
Press PLAY to start
(➡ page 9).
3
4
Move [3, 4] to select a track and press [ENTER].
Each time you move the joystick,
1()2( - - - - - - - )ALL
^---------------------------------------J
≥Repeat steps 1, 2 and 3 to program other tracks.
≥You can also select a group or track with the numbered buttons.
≥All the tracks on a disc are selected when you select “ALL” (all the
tracks in the selected group with DVD-Audio).
DVD
AUDIO
Press [1] (PLAY).
Play now begins in the programmed sequence.
Program play
To play a maximum of 32 tracks in a programmed order
e.g. DVD-Audio
To add or change tracks
Move [3, 4] to select an available item, then repeat steps 1–3.
Choose a group and track, then press ENTER.
PLAY MODE
G
No
T
Time
1
Play
5
To move to the page before or after the one shown
∫ 1
6
Clear
Press [6] or [5].
Clear all
A
To clear the programmed tracks one by one
Move [3, 4] to select the item number (No) and press [CANCEL]. (Alter-
natively, you can select “Clear” with [3, 4, 2, 1] and press [ENTER].)
SELECT
0:00
Total Time
To clear the whole program
RETURN
ENTER
0 Press PLAY to start
Move to “Clear all” with [3, 4, 2, 1] and press [ENTER].
The whole program is also cleared when the unit is turned off or the disc
tray is opened.
GROUP TITLE TRACK CHAP
V.S.S.
BASS
CINEMA
PGMRND
DVD VCD
VIDEO
A-B
AUDIO
Random play
Group No. Track No.
Program No.
1
2
[DVD-Audio\only]
Move [2, 1] to select a group and press
[ENTER].
≥You can select more than one group.
≥You can also select groups with the numbered buttons.
≥If you select bonus groups, you will have to enter a 4-digit pass-
word (➡ page 9).
Random play
To play tracks randomly
e.g. DVD-Audio (three groups)
Random Playback
Press [1] (PLAY).
Play now begins in random order.
Choose a group or groups
All
1
2
3
SELECT
To clear a group [DVD-A]
Move [2, 1] to select the group you want to clear, then press [ENTER].
RETURN
ENTER
0 Press PLAY to start
RND
DVD
AUDIO
Normal play
≥The program is retained in memory.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat play
Repeat play
During play
OPEN/CLOSE
Press [REPEAT MODE].
Each time you press the button:
P
e.g. DVD-Video
PGMRND
DVD VCD
VIDEO
A-B
2, 1/
ENTER
GROUP
PAGE
ENTER
MARKER
RETURN
C
T
OFF
MARKER
SUBTITLE
AUDIO
SKIP
SLOW/SEARCH
≥DVD-Audio
Track (T)>Whole group (G)>OFF
^----------------------------------------------------}
STOP
PAUSE
PLAY
∫
During All group, Program, or Random play modes, “A” is displayed
instead of “G”.
1
4
2
5
8
0
3
6
≥DVD-Video
7
9
>
Chapter (C)>Title (T)>OFF
^------------------------------------------}
CANCEL
10
=
CANCEL
AUDIO
ONLY
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
≥Video CD/CD
A-B
SETUP
MODE REPEAT MODE
Track (T)>Entire disc (A)>OFF
^------------------------------------------------}
A-B REPEAT
REPEAT MODE
If the Video CD has playback control
1. Press [∫] during play until “PBC PLAY” is cleared from the display.
2. Press the numbered buttons to select a track to start play (➡ page 9).
3. Press [REPEAT MODE] (➡ above).
Note
You cannot use repeat play to repeat an entire DVD-Video.
[DVD-A] [DVD-V] [VCD] [CD]
∫ To repeat only your favorite tracks
[DVD-A] [VCD] [CD]
Remote control only
A
Start program play (➡ page 11) and press [REPEAT MODE] to display the
repeat mode you like.
A-B repeat play
You can repeat a section between points A and B within a title or track.
Marking places to play again––MARKER
1
During play
You can mark specific points on a disc to return to later. All the markers are
cleared when the unit is turned off, or the disc tray is opened.
Press [A-B REPEAT] at the starting point (A).
1
Press [MARKER].
A
✱
✱✱✱✱✱
2
Press [A-B REPEAT] at the finishing point (B).
PGMRND
DVD VCD
VIDEO
A-B
2
Press [ENTER] at the point you want to mark.
To select another marker, move [2, 1].
To play from a marked position
To cancel
Move [2, 1] to select a marker number and press [ENTER].
To clear a marker
Move [2, 1] to select a marker number and press [CANCEL].
Press [A-B REPEAT] until “`¢¢” is displayed.
Note
≥A-B repeat play does not work if the DVD’s elapsed play time is not
shown on the unit’s display.
≥Some subtitles recorded around point A or B may fail to appear (DVD).
≥The unit automatically determines the end of a title/track as point B when
the end of the title/track is reached.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing soundtracks, subtitle languages and angles
Subtitles
During play
OPEN/CLOSE
Press [SUBTITLE].
The number changes each time you press the button.
P
ON
FRA
ON
ENG
3, 4, 1
2
1
GROUP
PAGE
ENTER
MARKER
RETURN
SUBTITLE
AUDIO
SUBTITLE
AUDIO
ANGLE
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
I love you
Je t’aime
Subtitle language number
1
4
2
5
8
0
3
6
7
9
>
CANCEL
10
=
To clear/display the subtitles
1. Press [SUBTITLE].
2. Move [1].
AUDIO
ONLY
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
A-B
SETUP
MODE REPEAT MODE
3. Move [3, 4] to select “OFF” or “ON”.
Angles
During play
Press [ANGLE].
The number changes each time you press the button.
[DVD-A] [DVD-V]
1
2
Remote control only
A
Some DVDs have multiple soundtracks, subtitle languages and camera
angles, and you can change these during play.
Soundtracks
During play
Angle number
Notes regarding soundtracks and subtitle languages
≥“–” or “––” is displayed instead of the language number in circum-
stances such as when no language is recorded on the disc.
≥In some cases, the subtitle language is not changed to the selected
one immediately.
Press [AUDIO].
The number changes each time you press the button.
DVD-Audio
DVD-Video
1
1
Digital
LPCM
192k24b 2ch
Î
≥Refer to [D] and [E] on page 15 for language abbreviations and audio
signal type details.
1 ENG 3/2.1 ch
Soundtrack selected
Soundtrack playing
e.g. DVD-Video
GROUP TITLE TRACK CHAP D.N.R. D.MIX P.PCM MLT.CH V.S.S.
BASS
CINEMA
PGMRND
DVD VCD
A-B
VIDEO MP
3
AUDIO
Indicates that a multi-channel
Lights when a multi-chan-
soundtrack can be down-mixed to nel soundtrack is playing.
two channels.
≥Play restarts from the beginning of the soundtrack when changing DVD-
Audio soundtracks that are accompanied by still pictures.
≥Even if a second soundtrack isn’t recorded on a DVD-Audio, two
soundtrack numbers will normally be shown when you press [AUDIO].
The soundtrack currently playing is number 1.
≥You can also use this button to turn the vocals on and off on karaoke
discs. Read the disc’s instructions for details.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Graphical User Interface (GUI) screens
For your reference
≥Depending on the condition of the unit (playing, stopped, etc.) and the
type of software you are playing, there are some items that you cannot
select or change.
OPEN/CLOSE
≥When numbers are displayed (e.g. title No.), the numbered buttons are
also effective for setting. After entering numbers, press [ENTER] to regis-
ter the setting.
P
DISPLAY
RETURN
To clear the icons
Press [RETURN] until the menus disappear.
3, 4, 2, 1/
ENTER
GROUP
PAGE
ENTER
MARKER
RETURN
∫ To change the position of the icons
1. Move [2, 1] to select the rightmost icon.
2. Move [3, 4] to move the icons.
(There are 5 positions)
SUBTITLE
AUDIO
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
Disc information
ªA
1
4
2
5
8
0
3
6
Numbered
buttons
e.g. DVD-Video
7
9
>
CANCEL
10
=
Digital
ON
ENG
Î
T
C
1
1 ENG 3/2.1 ch
1 : 46 : 50
AUDIO
ONLY
2
2
1
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
A-B
a
b
c
d
e
f
g
SETUP
MODE REPEAT MODE
e.g. DVD-Audio
e.g. Video CD
P B C
Page
1
L
R
ON
h
i
j
a
b
c
T: Title number [DVD-V]
G: Group number [DVD-A]
C: Chapter number [DVD-V]
T: Track number [DVD-A] [VCD] [CD]
GUI screens are menus that contain information about the disc or unit.
These menus allow you to perform operations by changing this informa-
tion.
Time [DVD-A] [DVD-V]
A
Select a position to start play by specifying a time with the numbered
buttons.
Common procedures
Changing the time display [DVD-A] [VCD] [CD]
Move [3, 4] to show the elapsed play time, remaining time for the
track, or remaining time for the disc/group (DVD-A).
Soundtrack language [DVD-A] [DVD-V] (➡ page 13)
(See [D] on page 15 for language abbreviations.)
Audio signal type [DVD-A] [DVD-V] (➡ page 13)
(See [E] on page 15 for details.)
[DVD-A] [DVD-V] [VCD] [CD]
d
e
Remote control only
1
Press [DISPLAY].
Each time you press the button:
[A] Disc information>[B] Unit information (➡ step 2)
Karaoke vocal on/off (Karaoke DVD only) [DVD-V]
:
;
Solo: OFF or ON
Duet: OFF, V1iV2, V1 or V2
Original display(- [C] Shuttle screen
f
Subtitle language [DVD-A] [DVD-V] (➡ page 13)
(See [D] on page 15 for language abbreviations.)
Subtitles on/off
≥The screens depend on the disc contents.
ON()OFF
Angle number [DVD-A] [DVD-V] (➡ page 13)
Still picture number [DVD-A]
2
[Unit\information\only]
g
h
While the leftmost icon is highlighted
Move [3, 4] to select the menu.
Each time you move the joystick:
Play menu(-----)Video menu
Selected picture is shown during play.
Audio mode [VCD]
LR()L()R
^---------------------J
Menu play [VCD] (with playback control only)
Indicates whether menu play (playback control) is on or off.
i
j
e
e
u
u
Display menu()Audio menu
3
4
Move [2, 1] to select the item.
Move [3, 4] to select the setting.
≥Items with “3” or “4” above and below can be changed by [3, 4].
≥Press [ENTER] if the setting does not change after moving [3, 4].
≥Some items require different operations. Read the explanations on
the following pages.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit information
ªB
Play menu
Audio menu
–––
1 2 3 ✱ ✱
AB
OFF
SP OFF
OFF
a
b
c
d
a
b
c
a
b
A-B repeat [DVD-A] [DVD-V] [VCD] [CD] (➡ page 12)
[ENTER] (start point) ➡ [ENTER] (finish point)
To cancel: [ENTER]
Repeat play [DVD-A] [DVD-V] [VCD] [CD] (➡ page 12)
≥DVD-Audio
Track (T)(>Whole group (G)(>OFF
^-----------------------------------------------------------J
≥DVD-Video
a
b
ADVANCED SURROUND V.S.S. mode [DVD-V] [VCD] (➡ page 10)
SP()HP
SP/HP level [DVD-V] [VCD] (➡ page 10)
1()2()OFF
^---------------------J
Dialogue Enhancer [DVD-V]
(Dolby Digital/DTS, 3-channel or over only)
ON()OFF
c
Chapter (C)(>Title (T)(>OFF
^------------------------------------------------J
≥Video CD/CD
The volume of the dialogue from the center channel is raised when you
select “ON”.
Track (T)(>Entire disc (A)(>OFF
^------------------------------------------------------J
Play mode display [DVD-A] [VCD] [CD]
c
d
---:
Normal play
PGM: Program play
RND: Random play ALL: All group play ([DVD-A])
Marker [DVD-A] [DVD-V] [VCD] [CD] (➡ page 12)
Display menu
Video menu
I P B
OFF
BRIGHT
N
a
b
Digital picture mode [DVD-A] [DVD-V] [VCD]
N: Normal mode
C: Cinema mode (Mellows movies, enhances detail in dark scenes.)
U: User mode
a
b
IPB display [DVD-V] (➡ page 21)
ON()OFF
Displays the picture type (I/P/B) in the still picture mode.
Display dimmer
A
The following items are also displayed when you select “U”.
Changes the brightness of the unit’s display.
BRIGHT()DIM()AUTO ([DVD-A] [DVD-V] [VCD])
^---------------------------------J
The display is dimmed during play, but brightens when you perform ope-
rations such as slow-motion, search, and pause.
§
§
U
0
0
0
0
a
b
c
d
a
b
c
d
Contrast (j7 to i7)
Brightness (0 to i15)
Sharpness (j6 to i6)
Color (j7 to i7)
Shuttle screen
ªC
[D] Audio/Subtitle language
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
j100
r100
E: Slow-motion play (Backward) [DVD-A] [DVD-V]
;: Pause
D: Slow-motion play (Forward) [DVD-A] [DVD-V] [VCD]
6: Search (Backward)
1: Play
¢:
Others
[E] Signal type/data
LPCM/PPCM/Î Digital/DTS/MPEG: Signal type
5: Search (Forward)
k (kHz):
b (bit):
Sampling frequency
Number of bits
ch (channel): Number of channels
Note
Example: 3/2 .1ch
The numbers on either side of the shuttle screen indicate the maximum
speeds of the search.
.1: Subwoofer signal
(not displayed if there is no subwoofer signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
1: Center
2: Front leftiFront right
3: Front leftiFront rightiCenter
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Theater—Enjoying more powerful sound
This unit has built-in Dolby Digital and DTS decoders (➡ page 21).
You can enjoy the powerful movie theater and hall-like sound available with Dolby Digital and DTS by connecting an amplifier with 5.1-channel input
terminals. You do not need to purchase separate Dolby Digital or DTS decoders.
Use analog connection to enjoy audio recorded with high sampling frequencies (over 48 kHz). To protect the rights of the producers of this
kind of material, this audio will be down-sampled to 48 kHz or 44.1 kHz if you use digital connection.
To enjoy 5.1-channel surround sound
Analog connection
Digital connection
Connect an amplifier with 5.1-channel audio input terminals.
Connect an amplifier with a built-in decoder or a decoder-amplifier combi-
Change “Speaker setting” (➡ page 19).
nation.
Change “Digital output” (➡ page 20).
DIGITAL AUDIO OUT
PCM/BITSTREAM
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
PCM/BITSTREAM
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
(
)
5.1ch
2ch
L
(
)
5.1ch
2ch
L
SURROUND
FRONT
L
SURROUND
FRONT
L
CENTER
CENTER
L
L
OPTICAL
OPTICAL
SUB-
WOOFER
R
R
R
SUB-
WOOFER
R
R
R
SURROUND
FRONT
SURROUND
FRONT
Back of the unit
Back of the unit
White Red
White Red Red White
Audio cable
Insert fully,
with this side
facing up.
Connect cables to
terminals corresponding
to the speakers you have
connected.
A
Optical digital audio
cable
Do not bend when
connecting.
CENTER SUB-
SURROUND
(L) (R)
FRONT
(R) (L)
OPTICAL
WOOFER
Amplifier
Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
Note
Note
≥Turn speaker and headphone V.S.S. (➡ page 10) off when you connect
through the 5.1-channel output terminals. The unit does not output the
signals for channels other than the front speakers when V.S.S. is on.
≥If you do not connect a subwoofer, it is advisable to connect front spea-
kers (L/R) capable of producing bass of less than 100 Hz.
You cannot use DTS Digital Surround decoders not suited to DVD-Video.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
To enjoy stereo or Dolby Pro Logic
Analog connection
Digital connection
ªA
ªB
Connect an analog amplifier or system component.
Connect a digital amplifier or system component.
Change “Digital output” (➡ page 20).
DIGITAL AUDIO OUT
PCM/BITSTREAM
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL AUDIO OUT
PCM/BITSTREAM
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
(
)
5.1ch
2ch
L
(
)
5.1ch
2ch
L
SURROUND
FRONT
L
SURROUND
FRONT
L
CENTER
CENTER
L
L
OPTICAL
OPTICAL
SUB-
WOOFER
R
R
R
SUB-
WOOFER
R
R
R
SURROUND
FRONT
SURROUND
FRONT
Red White
Insert fully,
with this side
facing up.
Audio cable
Optical digital audio cable
Do not bend when connecting.
A
L
R
OPTICAL
AUX IN
Amplifier or system component
To enjoy Dolby Pro Logic
≥If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy surround
sound. Read the instructions for the equipment for connection details.
≥Turn Advanced Surround off (➡ page 10). Dolby Pro Logic will not function correctly if Advanced Surround is on.
Recording to MDs or cassette tapes
∫ Analog recording
To make a digital recording
1. Connect the recording equipment with an optical digital audio cable
(➡ [B] above).
2. When recording DVDs, make the following settings.
ADVANCED SURROUND V.S.S.: OFF (➡ page 10)
PCM Down Conversion: Yes (➡ page 20)
You can record to an MD or cassette deck. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
Connect the recording equipment with an audio cable (➡ [A] above).
∫ Digital recording
You can record the digital signal directly onto an MD.
Dolby Digital/DTS Digital Surround/MPEG: PCM (➡ page 20)
MPEG: Not available in Asia.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
≥There is no copy guard recorded on the disc.
≥The recording equipment can handle a sampling frequency of 48 kHz.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing settings
This chart shows the settings for this unit. Change the settings to suit your preferences and to suit the unit to the environment in which it is
being used. These settings are retained in memory until they are changed, even if the unit is turned off. See page 19 for details on menu
operation.
≥Underlined items are the factory preset.
Menus
Items
Options
Disc
Audio [DVD-A] [DVD-V]
Choose the preferred audio language.
English
Spanish
French
Original
German
Other ¢¢¢¢§2
French German
Other ¢¢¢¢§2
German Italian
Italian
§1
§3
Subtitle [DVD-A] [DVD-V]
Choose the preferred subtitle language.
Automatic
Italian
English
Spanish
French
Other ¢¢¢¢§2
Menus [DVD-A] [DVD-V]
Choose the preferred language for disc menus.
English
Spanish
For Asia: Language options are English and
Chinese.
Ratings [DVD-V]
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
§4
8 No Limit
1 to 7
0 Lock All
≥The password screen is shown if you choose levels 0 to 7 or if you
choose “ Ratings” when levels 0 to 7 have been selected. (➡ page 19)
≥Select “Level 0” to prevent play of discs that do not have ratings levels
recorded on them.
Changing ratings (When level 0–7 is selected)
Unlock Player
Change Level
Change Password
Temporary Unlock
Video
TV Aspect (➡ page 5)
4:3 Pan&Scan 4:3 Letterbox 16:9
Choose the setting to suit your television and preference.
(For the United Kingdom, Continental Europe and Russia)
AV1 Output (➡ page 4)
Choose the video signal format to be output from the AV1 SCART terminal.
Video
S-Video
Field
RGB
Still Mode (➡ page 21)
Automatic
Frame
Specify the type of picture shown when paused.
NTSC Disc Output
Choose whether PAL 60 or NTSC signals are output during playback of
NTSC discs (➡ page 6).
PAL60: when connected to a PAL television.
NTSC: when connected to an NTSC television.
(For Asia: “NTSC” is the factory preset.)
§5
Audio
Speaker Setting [DVD-A] [DVD-V] (➡ page 19)
Choose the settings to suit your audio system and the listening
environment.
Multi-channel
A
Speaker presence and size
Delay time
Channel balance
§6
2-channel
No
PCM Down Conversion [DVD-A] [DVD-V] (➡ page 20)
Dolby Digital [DVD-A] [DVD-V] (➡ page 20)
Yes
Bitstream
PCM
PCM
DTS Digital Surround [DVD-A] [DVD-V] (➡ page 20)
Bitstream
Bitstream
(For the United Kingdom, Continental Europe, Russia, Australia and
PCM
N.Z.) MPEG [DVD-A] [DVD-V] (➡ page 20)
D. Range Compression [DVD-A] [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
Off
On
On
§7
Audio during Search [DVD-A] [DVD-V] [VCD]
Off
Choose whether to have sound during search.
Display
Others
Menu Language
English
Italiano
For Asia:
Français
Español
English
Deutsch
Choose the preferred language for these menus and the on-screen messages.
On-Screen Messages
Choose whether to show on-screen messages or not.
On
Off
DVD-Video Mode
Select how to play pictures contained on some DVD-Audio.
Off
On
§8
The setting returns to “Off” when you remove the disc or turn the unit off.
Demo
Off
On
A demonstration of the unit’s on-screen displays starts when you select
“On”. The demonstration stops when you press a button and the setting
reverts to “Off”.
Remarks
§1The original language of each disc will be selected.
§2Input a code number with the numbered buttons (➡ page 23).
§3If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc.
§4Prohibits play of DVD-Video with corresponding ratings recorded on them.
§5When you have connected 3 or more speakers.
§6When you have connected 2 speakers or an amplifier with a Dolby Pro Logic decoder.
§7Audio will still be heard during search with some DVD-Audio.
§8Off: DVD-Audio are played as DVD-Audio.
On: DVD-Video contents found on DVD-Audio can be played.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering a password (Ratings)
[DVD-V]
OPEN/CLOSE
The password screen is shown when you select levels 0 to 7.
P
SETUP
Ratings
3, 4, 2, 1/
ENTER
Enter a 4-digit password,
then press ENTER.
GROUP
PAGE
ENTER
MARKER
RETURN
SUBTITLE
AUDIO
RETURN
SKIP
SLOW/SEARCH
SELECT
Password
✱✱✱✱
STOP
PAUSE
PLAY
ENTER RETURN
1
4
2
5
8
0
3
6
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
Numbered
buttons
7
9
>
≥If you enter a wrong number, press [CANCEL] to erase it before you
press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
CANCEL
10
=
CANCEL
SETUP
AUDIO
ONLY
HP-V.S.S. SP-V.S.S.
REPEAT
ANGLE
PLAY
A-B
SETUP
MODE REPEAT MODE
2. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
Speaker setting
[DVD-A] [DVD-V]
Common procedures
Change speaker presence and size a, delay time b, and channel
balance c to suit the speakers you have connected.
Remote control only
See page 18 for menu and option details.
A
These settings are not necessary when you select “2-channel”
(only two speakers are connected).
1
Press [SETUP] to show the menus.
Front (L)
a
Center
a c
Front (R)
a
b
Disc
SETUP
Audio
Subtitle
Menus
English
SETUP
Automatic
English
Exit
L
C
R
m s
0
d B
0
SELECT
Ratings
Level 8
Exit
Test
d B
0
SW
RS
SELECT
2
Move [2, 1] to select the menu’s tab.
The screen changes to display the menu.
d B m s d B
LS
0
0
0
Test
ENTER RETURN
signal
Disc menu
Video menu
Audio menu
a
c
b
c
a
(---)
(---)
(L)
(R)
c a
Subwoofer
:
;
:
;
Surround
Others menu
Display menu
(------------------------------------------------------)
Speaker presence and size (a)
1. Use [3, 4, 2, 1] to select the item and press [ENTER].
2. Move [3, 4] to select the setting and press [ENTER].
3
4
Move [3, 4] to select the item you want to
change and press [ENTER].
Icon examples: Surround speaker (L)
Move [3, 4] to select the option and press
[ENTER].
The screen now shows the menu again.
LS
LS
Large
Small
No
Large: When the speaker supports low-frequency (under 100 Hz) repro-
To return to the previous screen
Press [RETURN].
duction.
Small: Select when the speaker does not support low-frequency
reproduction.
The size setting for the front speakers is automatically determined by the
setting for the subwoofer.
When you are finished
Press [SETUP].
(Continued on next page)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing settings
Delay time (b)
Digital output
[DVD-A] [DVD-V]
[DVD-V] (Dolby Digital, center and surround speakers only)
Change the settings when you have connected equipment through this
unit’s DIGITAL AUDIO OUT terminal (OPTICAL).
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position. If you
have to place the center or surround speakers closer to the seating position,
adjust the delay time to make up for the difference.
If distance d (from the center speaker) and f (from the surround speak-
ers) are the same as or greater than e (from the front speakers), leave the
delay time as “0”, the factory preset.
PCM Down Conversion
Select how to output the high-quality audio signals (sampling frequencies
of 96 kHz and 88.2 kHz) on discs that do not have copyright protection.
Choose the settings to suit the equipment you have connected.
If either distance d or f is less than e, find the difference in the relevant
table and change to the recommended setting.
Equipment
(Able to handle
88.2 kHz or more)
Setting
Audio output
L
R
C
d
e
Yes
No
No
Output as is
Yes
Down-sampled to
48 kHz or 44.1 kHz
SW
f
RS
LS
Note
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even
if they can handle 96 kHz. Read your equipment’s operating instructions
for details.
≥Signals are down-sampled to either 48 kHz or 44.1 kHz despite the
above settings if they have a sampling frequency of 176.4 kHz or more or
are copyright protected.
Changing the delay time
1. Use [3, 4, 2, 1] to select the delay time box and press [ENTER].
2. Move [3, 4] to adjust the delay time and press [ENTER].
≥Center speaker
≥Surround speakers
§
Dolby Digital, DTS Digital Surround and MPEG
Difference
Approx. 50 cm
Approx. 100 cm
Approx. 150 cm
Approx. 200 cm
Setting
1.3 ms
2.6 ms
3.9 ms
5.3 ms
Difference
Approx. 200 cm
Approx. 400 cm
Approx. 600 cm
Setting
5.3 ms
Bitstream: Select if the equipment you connected can decode the signal.
(Factory preset for Dolby Digital)
PCM: Select if the equipment you connected cannot decode the signal.
(Factory preset for DTS Digital Surround and MPEG)
A
10.6 ms
15.9 ms
IMPORTANT
If the equipment you connected cannot decode the signal, the setting
must be changed to PCM. If not, signals the equipment cannot pro-
cess will be output by this unit, causing high levels of noise which
can damage your hearing and the speakers.
Channel balance (c)
1. Use [3, 4, 2, 1] to select “Test” and press [ENTER].
§
MPEG: Not available in Asia.
A test signal is output from one speaker at a time, starting with the front
left speaker and proceeding clockwise.
FRONT(L)_--)CENTER_--)FRONT(R)
:
;
SURROUND(L)(-----------==SURROUND(R)
2. While listening to the test signal, move [3, 4] to adjust the vol-
ume of the center and surround speakers so they are the same
apparent volume as the front speakers.
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
Note
No signal is output for the subwoofer. To adjust its volume, play something,
then return to this screen to adjust to suit your taste.
When you are finished
Use [3, 4, 2, 1] to select “Exit” and press [ENTER].
Note
The unit may be unable to output as set here due to limitations imposed by
the unit itself or the disc being played. (The FL display’s “P.PCM” indicator
lights or “D.MIX” indicator goes out in these cases.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Glossary
Bitstream
Placement
This is the digital form of multiple channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
Set the unit up on an even surface away from direct sunlight, high tem-
peratures, high humidity, and excessive vibration. These conditions can
damage the cabinet and other components, thereby shortening the unit’s
service life.
Decoder
A decoder restores the coded audio signals on DVDs to normal. This is
called decoding.
Do not place heavy items on the unit.
Dolby Digital
This is a method of coding digital signals developed by Dolby Laboratories.
Apart from stereo (2-channel) audio, these signals can also be 5.1-channel
audio. A large amount of audio information can be recorded on one disc
using this method.
Voltage
Do not use high voltage power sources. This can overload the unit and
cause a fire.
Do not use a DC power source. Check the source carefully when setting
the unit up on a ship or other place where DC is used.
Dolby Pro Logic
A surround system where a 4-channel audio track is recorded as
2 channels and then is restored to 4 channels for play. The surround chan-
nel is monaural and can reproduce up to 7 kHz.
AC mains lead protection
DTS (Digital Theater Systems)
This surround system is used in many movie theaters around the world.
There is good separation between the channels, so realistic sound effects
are possible.
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.
Dynamic range
Grasp the plug firmly when unplugging the lead. Pulling the AC mains
lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Dynamic range is the difference between the lowest level of sound that can
be heard above the noise of the equipment and the highest level of sound
before distortion occurs.
Frame still and field still
Foreign matter
Frames are the still pictures that go together to make a moving picture.
There are about 30 frames shown each second.
One frame is made up of two fields. A regular television shows these fields
one after the other to create frames.
A still is shown when you pause a moving picture. A frame still is made up
of two alternating fields, so the picture may appear blurred, but overall
quality is high.
Do not let metal objects fall inside the unit. This can cause electric shock
or malfunction.
Do not let liquids get into the unit. This can cause electric shock or mal-
function. If this occurs, immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
A field still is not blurred, but it has only half the information of a frame still
so picture quality is lower.
I/P/B
Service
R
MPEG 2, the video compression standard adopted for use with DVD-
Video, codes frames using these 3 picture types.
I: Intra coded picture (I-picture)
Do not attempt to repair this unit by yourself. If sound is interrupted, indi-
cators fail to light, smoke appears, or any other problem that is not covered
in these instructions occurs, disconnect the AC mains lead and contact
your dealer or an authorized service center. Electric shock or damage to
the unit can occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
This is the standard picture and is a complete picture in itself.
This means it has the best picture quality and is the best to use when
adjusting the picture.
P: Predictive coded picture (P-picture)
This picture is calculated based on past I or P-pictures.
B: Bidirectionally-predictive coded picture (B-picture)
This picture is calculated by comparing past and future I and P-
pictures so it has the lowest volume of information.
Extend operating life by disconnecting the unit from the power source if it
is not to be used for a long time.
Linear PCM (pulse code modulation)
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
PCM is the usual digital method used for music CDs. DVDs have a greater
volume so they use linear PCM, which has a higher sampling rate. Com-
pressed PCM signals are called packed PCM (PPCM).
Playback control (PBC)
If a Video CD has playback control, you can select scenes and information
with menus (called menu play in these instructions).
Maintenance
To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor
adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
Reference pages are shown as black circled numbers 4.
Power
No power.
≥Insert the AC mains lead securely into the household mains socket. 4
The unit is automatically
≥To conserve power, the unit automatically switches to standby after approximately 30 minutes in the stop
switched to the standby mode.
mode. Turn the power back to ON.
Operation
No response when buttons
pressed.
≥Some operations may be prohibited by the disc.
≥The unit may not be operating properly due to lightning, static electricity or some other external factor.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON.
Alternatively, press [Í] to switch the unit to the standby mode, disconnect the AC mains lead, and then
reconnect it.
No operations can be performed
with the remote control.
≥Check the batteries are installed correctly. 5
≥The batteries are depleted: Replace them with new ones. 5
≥Point the remote control at the remote control sensor and operate. 5
Play fails to start even when
[1] (PLAY) is pressed.
Play starts but then stops
immediately.
≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.
≥This unit cannot play discs other than DVD-Audio, DVD-Video, Video CD and CD. 6
≥You can only play DVD-Video if their region number is the same or includes the same region number as
the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on the rear panel.
≥The disc may be dirty and may require cleaning.
≥Ensure that the disc is installed with the label of the side to be played facing upwards. 7
Alternative languages fail to be
selected.
≥An alternative language is not selected with discs which do not contain more than one language.
≥In the case of some discs, the alternative language cannot be selected with [AUDIO] or
[SUBTITLE]. Try selecting it from the disc’s menu if one is available. 7
No subtitles.
≥Subtitles appear only with discs that contain them.
≥Subtitles are cleared from the television. Display the subtitles. =
Soundtrack and/or subtitle
language is not the one selected
with the SETUP menus.
≥The language is not recorded on the disc.
R
Angle cannot be changed.
≥This function is dependent on software availability. Even if a disc has a number of angles recorded, these
angles may be recorded for specific scenes only. =
Dialogue Enhancer has no effect.
≥This feature does not work when the unit is outputting bitstream signals.
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
≥While stopped, press and hold [:] and [;] on the unit and then also press and hold [<] on the unit until
“Initialized” disappears from the television. Turn the unit off and on again.
All initial settings will return to the default values.
Sound
No sound.
≥Check the connections. 4 @ A
Distorted sound.
≥Check the volume on the equipment you have connected.
≥Ensure that the input settings for the television and stereo system are correct.
≥If you have connected this unit to an amplifier through the AUDIO OUT (5.1 ch) terminals, go to the Audio
menu in the SETUP menus, and change “Speaker Setting” to suit your speakers. Select the large or small
icon for all the speakers you have connected. C
≥Turn Advanced Surround off if it causes distortion. :
≥Output from this unit will be in stereo (two channels) when Advanced Surround is on. Turn Advanced
Surround off if you are using three or more speakers. :
≥Due to the specifications on some types of televisions, both video and audio may be cut off when you turn
the AUDIO ONLY feature on. :
≥If the “D.MIX” indicator on the FL display goes out while playing a multi-channel DVD-Audio disc, sound
will only be output from speakers specified by the disc. Read the disc’s instructions for details.
Piercing noise comes from the
speakers.
≥If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal, ensure you
have selected the correct settings for “Dolby Digital”, “DTS Digital Surround” and “MPEG” in the SETUP
menu’s Audio menu. D
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Picture distorted.
≥Some distortion is normal during SEARCH.
≥The screen may be disrupted briefly when you turn on and off the AUDIO ONLY feature. :
No picture.
≥Ensure that the equipment is connected properly. 4
≥Make sure the television is on.
≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
The picture shown on the
television is not normal.
≥Go to the Video menu in the SETUP screen, and change “TV Aspect” to suit your television. You may also
need to change the screen mode on the television itself. 5
(The sides of the picture are cut
off or black bands appear at the
top and bottom of the screen.)
≥Ensure that the unit is connected directly to the television, and is not connected through a video cassette
recorder.
Picture quality is poor.
≥Check the settings in the GUI screen’s video menu. ?
The SETUP menus and other
screens shown on the television
are displayed incorrectly.
Colors appear faded.
≥The unit and television are using different video systems.
[For]the]United]Kingdom,]Continental]Europe,]Russia,]Australia]and]N.Z.]
Use a multi-system or PAL television.
[For]Asia]
Use a multi-system or NTSC television.
Displays
“NO PLAY” appears on the
≥You inserted a disc the unit cannot play; insert one it can. 6
unit’s display.
No on-screen display.
≥Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”. B
GUI screens not displayed or
only partially displayed on the
television.
≥Move [3, 4] while the rightmost icon is highlighted to move them down. >
The disc’s menu is displayed in
≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”. B
a different language.
No menu play.
≥Menus are only displayed if they are recorded on the disc.
“CHECK THE DISC” appears on
≥Disc is dirty. Wipe the disc clean.
the unit’s display.
“ERROR” appears on the unit’s
≥The track playing has been recorded with a nonstandard system.
display.
R
“H∑∑” appears on the unit’s
display.
≥Trouble is likely to have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] to switch
the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service person.
∑∑ stands for a number.
“NO DISC” appears on the
≥You haven’t inserted a disc; insert one.
unit’s display.
≥You haven’t inserted the disc correctly; insert it correctly. 7
Language code list
Abkhazian:
Afar:
Afrikaans:
Albanian:
Ameharic:
Arabic:
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
Gujarati:
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
Lithuanian:
Macedonian: 7775
7684
Romanian:
Russian:
Samoan:
Sanskrit:
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona:
Sindhi:
Singhalese:
Slovak:
Slovenian:
Somali:
Spanish:
Sundanese:
Swahili:
Swedish:
Tagalog:
Tajik:
8279
8285
8377
8365
Telugu:
Thai:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:8083
Persian:
Polish:
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
Italian:
Ukrainian:
Urdu:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Uzbek:
Vietnamese:
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
Basque:
Bengali
Bhutani:
Bihari:
;
Bangla: 6678
6890
6672
6682
6671
7789
Breton:
Bulgarian:
Burmese:
Byelorussian: 6669
Cambodian:
Catalan:
7065
8076
8084
8065
8185
Portuguese:
Punjabi:
Quechua:
7577
6765
Latvian, Lettish: 7686
Lingala: 7678
Tamil:
Tatar:
Rhaeto-Romance: 8277
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Signal system:
PAL 625/50, PAL 525/60, NTSC
i5 to i35 oC
5 to 90 % RH (no condensation)
Audio performance:
(1) Frequency response:
≥DVD (linear audio):
Operating temperature range:
Operating humidity range:
Discs played (8 or 12 cm):
(1) DVD-Video
(1) DVD-R (DVD-Video compatible)
(2) DVD-Audio
4 Hz–22 kHz (48 kHz sampling)
4 Hz–44 kHz (96 kHz sampling)
4 Hz–88 kHz (192 kHz sampling)
4 Hz–20 kHz
≥DVD-Audio:
≥CD audio:
(2) S/N ratio:
(3) CD-Audio (CD-DA)
(4) Video CD
(5) CD-R/CD-RW (CD-DA, Video CD formatted discs)
≥CD audio:
115 dB
(3) Dynamic range:
≥DVD (linear audio):
≥CD audio:
102 dB
98 dB
(6) MP3
≥Maximum number of chapters and titles recognizable: 999 chap-
ters and 511 titles
(4) Total harmonic distortion:
≥CD audio:
0.0025 %
≥Compatible compression rate: between 32 kbps and 320 kbps
Video output:
Digital audio output:
Optical digital output:
Phones jack:
Optical terminal
Stereo, 6.3 mm jack
658 nm/790 nm
Output level:
1 Vp-p (75 ≠)
Output terminal:
Pickup:
Wave length:
Laser power:
[For\the\United\Kingdom,\Continental\Europe\and\Russia]
Pin jack (2 systems)/AV1/AV2
Pin jack (2 systems)
CLASS 2/CLASS 1
NORSK
Pickup:
[For\Australia,\N.Z.\and\Asia]
S video output:
Bølgelengde:
658 nm/790 nm
Ingen farlig strålning sendes ut
KLASSE 2/KLASSE 1
Laser-styrke:
Y output level:
C output level:
1 Vp-p (75 ≠)
NTSC; 0.286 Vp-p (75 ≠)
PAL; 0.300 Vp-p (75 ≠)
Power supply:
[For\the\United\Kingdom,\Continental\Europe,\Russia,\Australia\and\N.Z.]
Output terminal:
AC 220–240 V, 50 Hz
[For\the\United\Kingdom,\Continental\Europe\and\Russia]
S terminal (1 system)/AV1
S terminal (1 system)
Component video output: [For\Australia,\N.Z.\and\Asia]
[For\Asia]
Power consumption:
Dimensions:
AC 110–240 V, 50/60 Hz
15 W
430 (W)k248 (D)k82 (H) mm
(excluding protrusions)
2.6 kg
[For\Australia,\N.Z.\and\Asia]
Y output level:
PB output level:
PR output level:
Output terminal:
1 Vp-p (75 ≠)
0.7 Vp-p (75 ≠)
0.7 Vp-p (75 ≠)
Pin jack
Mass:
Power consumption in standby mode: approx. 4 W
(Y: green, PB: blue, PR: red)
1 system
Note
Number of terminals:
RGB video output:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
[For\the\United\Kingdom,\Continental\Europe\and\Russia]
R output level:
G output level:
B output level:
Output terminal:
Number of terminal:
Audio output:
Output level:
0.7 Vp-p (75 ≠)
0.7 Vp-p (75 ≠)
0.7 Vp-p (75 ≠)
AV1
[For\the\United\Kingdom,\Continental\Europe,\Russia,\Australia\and\N.Z.]
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
1 system
2 Vrms (1 kHz, 0 dB)
Output terminal:
[For\Asia]
[For\the\United\Kingdom,\Continental\Europe\and\Russia]
Pin jack/AV1/AV2
Pin jack
THIS UNIT IS INTENDED FOR USE IN TROPICAL
CLIMATES.
[For\Australia,\N.Z.\and\Asia]
Number of terminals:
2ch:
1 system
1 system
5.1ch discrete output (5.1ch):
This product may receive radio interference caused by mobile tele-
phones during use. If such interference is apparent, please in-
crease separation between the product and the mobile telephone.
Manufactured under license from Digital Theater Systems, Inc. US
Pat. No.5,451,942, 5,956,674, 5,974,380, 5,978,762 and other
world-wide patents issued and pending. “DTS” and “DTS Digital
Surround” are registered trademarks of Digital Theater Systems,
Inc.
C
1996, 2000 Digital Theater Systems, Inc. All rights
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
reserved.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
p
Matsushita Electric Industrial Co., Ltd.
RQT6043-B
F0801MM0
Download from Www.Somanuals.com. All Manuals Search And Download.
|