650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 1
Model No:
KX-TCD650E
Digital Cordless Phone
Operating Instructions
& Quick Guide
Centre Page Pullout
Safety Information . . . . . . . . . . . .2
Accessories . . . . . . . . . . . . . . . . .2
Setting Up . . . . . . . . . . . . . . . . . .3
Using the Telephone . . . . . . . . . .4
Additional Features . . . . . . . . . . .9
Handset Settings . . . . . . . . . . . .10
Base Unit Settings . . . . . . . . . . .13
Initial Settings . . . . . . . . . . . . . .16
For Optional Multi Unit Users . .17
Before Requesting Help . . . . . . .20
Index . . . . . . . . . . . . . . . . . . . . .22
Caller ID compatible
Please read before use and save
Charge the batteries for approx. 15 hours before initial use
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 3
Setting Up
Location
For maximum distance noise-free
Insert the Batteries
operation, place your base unit:
-Away from electrical appliances
such as TV, radio, personal
computer or another phone.
-In a convenient high and central
location.
Wall Mounting
Please ensure the batteries are
inserted as shown.
This unit can be mounted on a wall.
Insert screws into wall. The centres
of the screw holes should be 6cm
vertically apart.
Connection
Plug in the AC adaptor and the
telephone line cord in order #, $, %.
Connect the AC adaptor and the
telephone line cord.
WARNING:
DO NOT CONNECT THE
TELEPHONE LINE CORD TO
THE PHONE SOCKET & UNTIL
THE HANDSET IS FULLY
CHARGED.
Arrange the wires as shown, then
mount the unit.
6cm
6v
LINE
#
&
$
%
Notice
Fasten the AC adaptor cord to
prevent it from being disconnected.
Some features described in these
operating instructions/quick guide
are dependent upon subscription to
your Network provider (e.g
Caller ID).
All features of this type
will be marked through-
out the manual with this
icon .
Hook
The AC Adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use).
Please note throughout this
operating instructions/quick guide
that the word “PRESS” is depicted
by this symbol Z.
SteingUp
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
3
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 4
Battery Charging
Replacing the batteries
If the Ûicon flashes after a few
telephone calls even when the
handset batteries have been fully
charged, the batteries must be
replaced.
(Before Initial Use)
! The batteries must be charged
for approximately 15 hours
before initial use.
After the batteries have been
inserted into the handset, place the
handset in the powered up base unit.
(The telephone line cord must
not be connected to the
telephone socket at this time.
Please leave your standard
telephone connected until
battery charging is complete).
! Charge new batteries for
approximately 15 hours before
initial use.
(The telephone line cord must
not be connected to the
telephone socket at this time).
If the batteries are removed, the
battery icon is reset to Û(less
than 30% capacity). In this case,
even if fully charged batteries are fit-
ted, the icon remains as Ûuntil a
full charge cycle is complete.
The batteries are fully charged only
when Òis flashing.
(After Initial Use)
On replacing the batteries, ensure
that the correct battery type is
selected (see ‘Handset Settings’).
When the battery icon flashes (and,
if programmed, battery low alarm
sounds), the handset should be
charged immediately because there
is little energy left in the batteries.
Turning the Power ON/OFF
Turn Power ON
Z and hold
.
Battery Life
When button is released, display
changes to the standby mode and a
confirmation tone sounds.
Battery life is dependent on use and
conditions but in general when using
fully charged Ni-MH batteries:
Talk time: 20hrs approx.
Standby time: 200hrs approx.
Turn Power OFF
From the standby mode, Zand
hold
until a long tone sounds.
UsigtTlphone
When using Ni-Cd batteries (based
on 800mA per hour)
Talk time: 12hrs approx.
The display goes blank. If you put
the handset in the base unit, the
battery icon will display.
Standby time: 100hrs approx.
(Times indicated are for peak performance)
The batteries reach peak performance
after several full charge / discharge
cycles.
The batteries cannot be overcharged
unless they are repeatedly removed
and replaced.
If battery life is shortened then
please check that battery and charge
terminals are clean.
For maximum battery life it is
recommended that the handset is not
recharged until battery icon flashes
(Û).
Answering Calls
When the phone rings,
Z‰,K-I,N,Jor L.
When an external call is incoming,
you can temporarily turn off the
handset ringer.
During an incoming call, Zand
hold U.Èis displayed and the
handset ringing stops. (This function
will not work when the handset is on
the base unit or if an internal call is
incoming.)
4
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 5
Making Calls
Making a Call from the
Redial List
The last 10 numbers dialled are
stored.
Z‰.
Dial the number.
After a few seconds, the call duration
is displayed. The dialled number is
stored in the redial memory.
From the standby mode ZX.
ZSor Uto select number.
(To exit the redial list, Z ).
Z‰.
When you are finished with the
call, Z
.
Alternatively, dial the number,
then Z‰. This procedure
allows you to edit / confirm the
number before dialling.
Caller ID Service
Caller ID is a service of your
Network provider and will only
operate if you have subscribed to
this feature.
After subscribing to Caller
ID, this phone will display
the callers information.
If your unit is connected to a PBX or
a telephone line that does not
support this service you will not be
able to use it.
If you misdial, ZW.
If Î flashes and an alarm tone
sounds when you press ‰, move
closer to the base unit and try
your call again.
Setting the Receiver
Volume
During a phone call, Z Sor U
to change the volume setting to
LOW (o), MEDIUM (oo) or HIGH
(ooo).
Caller ID does not display caller
information while using the handset
for an intercom call. However, the
caller’s information will be stored to
the Caller ID List.
Handset Locator / Paging
Using this feature you can locate
a misplaced handset by paging.
ZÏon the base unit.
All handsets ring for 1 minute.
ZÏagain orZ‰on (one of)
the handset(s) to stop ringing.
Making a Call from the
Caller ID List
The last 50 caller’s phone numbers
are stored in the order the calls were
received.
From the standby mode
ZSor U.
The newest number is displayed.
If there are no numbers stored in
the Caller ID list noitemis
displayed.
Redialling
Redialling the Last
Number Dialled
ZSor Uto select number.
ZUto scroll to previous calls
and Sto the most recent calls.
Only the most recent call from
the same phone number is stored.
Only 12 digits of a phone number
are displayed. To display the
remaining digits of longer phone
numbers, ZC.
Z‰.
ZX.
The last number dialled displays and
is dialled.
UisgtTlphone
On selection Z‰.
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
5
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 6
To add digits ZK-I.
Making a Call from the
Caller ID List (cont.)
After you have viewed a phone
number, answered the call or called
back the caller, “⁄” is added to the
caller’s number.
To clear digits ZW.
Either Z‰to dial or to save
the number, ZY.
save speedis displayed.
ZY.
ZYto save.
After viewing all new Caller ID
numbers, the call counter is reset to
zero.
clear
To exit the Caller ID list Z .
(Clear a Number in the
List):
Caller ID List Menu /
Redial List Menu
ZV.
ZSor Uto select yes(YES).
ZV.
clearedis displayed, a confirmation
tone sounds and the next number is
displayed. If you clear the last
number, no itemis displayed.
You can save numbers from the
redial list/Caller ID list into speed
dial, edit or clear from memory.
From the standby mode ZX
(to access Redial list) or
ZSor U (to access Caller ID
list).
all clear
ZSor U to select number
from list.
(Clear all Numbers in the
List):
ZV.
ZV.
save speedis displayed.
ZSor Uto select yes(YES).
ZV.
A confirmation tone sounds and
cleared, then noitemis displayed.
ZSor Uto select a menu item
then follow the instructions
below.
Usigtlphone
To exit the menu at any time,
Z .
save speed
(Save a Number in the List
as a Speed Dial):
ZV.
Áis displayed.
ZY.
edit call no
(Edit a Number in the List):
ZV.
ZTor V to move the edit
point.
Digits are added or deleted to the left
of the flashing digit.
6
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 7
Speed Dialling
ZV.
You can store up to 20 telephone
numbers in the handset.
edit
is displayed.
ZSor Uto select a menu item
then follow the instructions that
follow:
Storing New Numbers
From the standby mode ZY.
new speedis displayed.
ZV.
edit
Áand an index number 00- 19is
displayed.
*Enter a phone number (max 24
digits).
(Edit the Speed Dial
Number):
ZV.
ZY.
ZTor Vto move the edit
point.
savedis displayed. To enter another
number repeat from *.
If speed dial memory is full memory
fullis displayed.
Digits are added or deleted to the left
of the flashing digit.
To add digits ZK- I.
To clear digits ZW.
ZYto save.
You can keep a record of your
Speed Dial numbers in the
reference table included in the
‘Quick Guide’.
clear
(Clear a Speed Dial
Number):
Dialling Stored Numbers
ZÁ.
ZV.
ZSor Uto select number.
OR
ZSor Uto select yes(YES).
ZV.
clearedis displayed, a confirmation
tone sounds and the next number is
displayed. If you clear the last
number, no itemis displayed.
Z00 - 19 to select index number
directly.
Z‰.
If you press W, or no digits are
entered for over 1 minute, speed
dial is cancelled.
hot key reg
(Register a Speed Dial
Number as a Hot Key
Saving Numbers to Speed
Dial from Other Lists
A I
-
):
Please reference “Caller ID List
Menu/Redial List Menu”.
ZV.
ZSor Uto select a key from
1-9.
If a key has already been assigned as
a hot key, it will flash in the display.
ZV.
Speed Dial List Menu
ZSor Uto select yes(YES).
ZV.
The speed dial number is displayed
and a confirmation tone sounds.
You can edit or clear a speed dial
number from memory or assign a hot
key to any speed dial number.
From the standby mode ZÁ.
To exit the menu at any time,
Z .
ZSor U to select number
from list.
Uisgtlphone
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
7
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 8
Hot Key
Dialling a Hot Key Number
You can assign the dialling buttons
A- Ias hot keys. You can
choose 9 phone numbers from the
speed dial list (See “Register a Speed
Dial Number as a Hot Key”).
Zand hold a key A- I.
The number stored with that key is
displayed.
ZSor Uto view other numbers
stored.
Z‰to dial.
Clearing Caller
Information from a Hot
Key
Zand hold a key A- I.
The number stored with that key is
displayed.
ZV. clearis displayed.
ZV.
ZSor Uto select yes(YES).
ZV.
UsigtTlphone
8
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 9
Key Lock
Dialling Pause
! This function is for PBX
line/long distance service users.
You can lock the handset dialling
buttons. Only incoming calls are
accepted while the key lock is ON.
A dialling pause is used when a
pause in the dialling of the phone
number is necessary using a PBX or
accessing a long distance service.
(see “Select Pause Timing”).
Turn Key Lock ON
Zand hold Yuntil a beep sounds.
‘Ó’ is displayed and all dialling
buttons are locked.
! When the key lock is ON,
emergency calls cannot be made
until key lock is cancelled.
For example, when 9 (line access
number) is dialled followed by a
pause to access an outside line
through a PBX:
Turn Key Lock OFF
Zand hold Yuntil a beep sounds.
‘Ó’ disappears and key lock is
cancelled.
ZI.
ZX. (‘p’ is displayed on the
LCD).
Enter telephone number.
Z‰.
Entering a pause prevents
misdialling when you redial or dial a
stored number.
The key lock is also cancelled if the
handset is turned off.
Recall Feature
Pressing Xonce creates one
pause. To extend the pause
requirement time, ZX
accordingly.
Mis used to access special
telephone services. Contact your
Network provider for details.
If your unit is connected to a PBX,
pressing Mallows you to access
some features of your host PBX such
as transferring an extension call
(Refer to ‘TBR’ in ‘Base Unit Settings’).
Call Waiting
Call Waiting is a service of your
Network provider and will only
operate if you have subscribed to this
service.
After subscription, your handset
displays a second caller’s phone
number while talking and a Call
Waiting tone is heard.
You can answer the second call,
keeping the first call on hold.
Please consult your
Network provider for
details of this service.
AidonlFatures
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
9
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 10
Handset Settings
You can change the handset settings using a handset near the base unit.
Before proceeding with any of the main menu items listed in this chap-
ter, the following procedure must initially be carried out:
1
From the Standby mode, ZV.
2 ZSor Uto select setting hs(Setting Handset).
3 ZV.
4 ZSor Uto select main menu items from below (see menus in shaded
text boxes):
To exit the menu at any time, Z
.
ZTor Wto return to previous step during programming.
time alarm
ringer opt
(Ringer Settings):
(Alarm Settings):*
ZV.
ZV.
ZSor U.
ZSor U.
set time
ringer vol
(Set Time of Alarm):*
ZV.
(Select the Handset Ringer
Volume):
ZK- Ito enter time (4
digits) - 24 hour clock. Digits are
entered over the flashing digit.
To clear ZW.
ZV.
ZSor Uto select Ringer Volume.
The choices are 6 levels or OFF.
ZV.
ZY to save.
ext ringer
ZSor Uto select once(Once),
repeat daily(Repeat Daily) or
off(Off).
(Select Ringer Pattern for
External Incoming call)*
To program see * below.
ZV.
set alarm
int ringer
(Set Alarm):
ZV.
ZSor Uto select once(Once),
repeat daily(Repeat Daily) or
off(Off).
(Select Ringer Pattern for
Internal call)*
To program see * below.
HadSetings
paging
(Select Ringer Pattern for
Paging/Handset Locator tone)*
To program see * below.
ZV.
To Stop Alarm
When the alarm sounds, Z‰,
K- I, Jor L.
alarm
Alarm stops and display returns to
the standby mode. If onceis
selected, the setting is turned off.
When in talk or intercom mode the
alarm will not sound until the call is
ended.
(Select Ringer Pattern for
Alarm tone):*
*
There are 20 patterns available for
each ringer option.
ZV.
ZSor Uto select ringer
pattern.
*
For this feature to work you must
first set the Clock (see “Base Unit
Settings”).
ZV.
10
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 11
Before programming, please follow steps 1 to 4 of ‘Handset Settings’.
! Time will only be displayed if
the clock has been set (see
“Base Unit Settings”).
tone opt
(Tone Settings):
ZV.
ZSor U.
talk mode
(Select Talk Mode
Display):
key tone
(Set Key Confirmation
Tone ON/OFF)*
To program see * below.
ZV.
ZSor Uto select from talk
time(Length of Call) or phone
no(Phone Number).
ZV.
call waiting
(Set Call Waiting Tone
ON/OFF)*
call opt
To program see * below.
Call waiting tone sounds when an
incoming external call is received
during an intercom call.
(Call Options):
ZV.
ZSor U.
range alarm
call bar
(Set Range Alarm ON/OFF)
To program see * below.
Alarm will sound when you move out
*
(Set Call Prohibition
ON/OFF):
of range of a base unit.
This allows you to make emergency
and intercom calls only.
ZV.
Enter handset PIN (4 digits).
If the PIN is incorrect an error tone
sounds.
ZSor Uto select on(On) or
off(Off).
ZV.
battery low
(Set Battery Low Tone
ON/OFF)*
* Program as follows
ZV.
ZSor Uto select ON/OFF.
ZV.
If onis selected, Ôis displayed.
direct no
display opt
(Enter a Direct Call
Number):
(Display Options):
ZV.
ZSor U.
After a Direct Call phone number
has been entered and Direct Call set
to ON, you can call the Direct Call
number only, by pressing ‰.
Incoming calls are accepted.
ZV.
Enter phone number.
ZY.
ZVto save the entered number.
ZSor Uto select on(On) or
off(Off).
standby mode
(Select Standby Mode
Display):
ZV.
ZSor Uto select from bs no
(Base Unit number), hs no
(Handset Number), clock(Clock)
or off(Off).
HdaSetings
ZV.
ZV.
If onis selected, Ëis displayed.
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
11
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 12
Before programming, please follow steps 1 to 4 of ‘Handset Settings’.
battery type
set direct
(Set Battery Type Ni-MH /
(Set Direct Call ON/OFF):
Ni-Cd):
ZV.
Select the type of battery installed. If
the battery type selected is not the
same as the type of battery installed,
the battery level icons will not be cor-
ZSor Uto select on(On) or
off(Off).
ZV.
If ON is selected, Ëis displayed.
rect.
ZV.
ZS/ Uto select ni-mh(Ni-MH)
or ni-cd(Ni-Cd).
ZV.
other opt
(Other Options):
registration
ZV.
ZSor U.
(Registration):*
ZV.
hspin change
ZSor U.
(Change Handset PIN):
register hs
You can change the 4 digit password
for the handset. The factory preset is
0000.
(Registering a Handset to
a Base Unit)*
ZV.
cancel base
(Cancelling a Base Unit)*
Enter current handset PIN (4
digits).
Enter new PIN (4 digits). (The
new PIN does not display).
Re-enter the new PIN. (If the PIN
is entered incorrectly, an error tone
sounds and display returns to
new pin____.
select bs
(Select Base Unit)*
*For information on registering
handset(s), cancelling and selecting
base unit(s), please refer to ‘For
Optional Multi-Unit Users’.
! Once you have programmed the
password, you cannot confirm it.
We recommend you write down the
password. If you forget it, please
consult our Panasonic Customer
Care Helpline.
HadSetings
reset hs
(Reset the Handset
Settings):
U.K. 08700 100 076
R.O.I. 01289 8333
You can reset all of the handset
settings to their initial factory set-
tings (see ‘Handset Initial Settings’).
auto talk
(Set Auto Talk ON/OFF):
ZV.
If you set Auto Talk to ON, you can
answer the phone by lifting the
handset off the base unit.
ZV.
ZSor Uto select on(On) or
off(Off).
Enter handset PIN (4 digits).
If PIN is correct, nois displayed.
ZSor Uto select yes(Yes).
ZV.
clearedis displayed and display
returns to settings menu.
ZV.
12
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 13
Base Unit Settings
You can change the base unit settings using a handset near the base unit.
Before proceeding with any of the base settings listed in this chapter, the
following procedure must initially be carried out:
1
From the standby mode, ZV.
2 ZSor Uto select setting bs(Setting Base).
3 ZV.
input codeis displayed. From this display, follow the instructions after
each heading.
Please note: Where ‘Enter PIN’ is stated in this chapter, it refers to the 4 digit
Base Unit PIN. (The factory setting is 0000).
To exit the menu at any time, Z
.
Ringer Mode
Select Base Unit
Ringer Volume
To select all handsets to
ring
ZBtwice.
ZK(Off) or A- Cto
select volume.
ZV.
ZA.
Enter PIN.
ZA.
ZV.
To select specific
handset(s) to ring
Selecting Time Break
Recall (TBR) / Earth
Recall Mode (option)
ZA.
Enter PIN.
ZB.
ZA- Fto select
handset(s).
The selected handsets will be
flashing.
The factory setting is time break
recall (TBR). If your PBX requires
earth recall mode, this can be added
at an extra cost. Please contact our
Customer Care Helpline for details.
ZV.
ZC.
Enter PIN.
ZBthen Bfor earth mode
OR
ZBthen Afor time break
recall mode (TBR).
ZV.
To select specific handset(s)
then all handsets to ring
The specific handset(s) will ring for a
selected number of rings. If not answered,
all handsets will ring.
ZA.
Enter PIN.
ZC.
ZA- Fto select handset(s)
to ring.
ZV.
BaUSetings
ZA- Fto select number of
rings.
ZV.
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
13
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 14
Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.
Select Pause Timing
Set Call Restriction
You can set the pause timing to 3 or
5 seconds, depending on your PBX
requirements (see “Dialling Pause”).
You can restrict selected handset(s)
from dialling selected phone
numbers. You can assign up to 6 call
restriction numbers (up to 8 digits).
ZF.
Enter PIN.
All registered handset numbers are
displayed.
ZC.
Enter PIN.
ZC.
ZAto select 3 seconds
OR
ZA - Fto select
handset(s) to restrict.
The selected handset(s) will flash.
ZV.
Enter a restriction number (max.
8 digits).
(If you misdial ZW).
ZYto confirm restriction
number.
To continue entering call restriction
numbers (max. 8 digits), enter the
number, then ZY.
ZBto select 5 seconds.
ZV.
Set the 4 - Digit Base
Unit PIN
You can change the 4-digit password
for the base unit. The factory preset
is 0000.
ZE.
Enter PIN.
Enter New PIN (4 digits) twice.
On completion, ZY.
! If you dial a restricted
number, the call does not
connect and restricted number
flashes.
If entered incorrectly, an error tone
sounds.
If entered correctly, a confirmation
tone sounds.
! Once you have programmed
the password, you cannot con-
firm it. We recommend you
write down the password. If
you forget it, please consult our
Panasonic Customer Care
Helpline.
Cancel Call Restricted
Handset(s)
ZF.
Enter PIN.
ZA- F to select
handset(s) to cancel.
The selected handset(s) will stop
flashing.
BaUSetings
U.K. 08700 100 076
R.O.I. 01289 8333
ZV.
14
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page a
A basic guide to operations & features.
Pull out centre pages for quick reference
Quick Guide &
Useful Information
Batteries
Insert the Batteries
Important!
Charge the batteries for
approx. 15 hours before
initial use.
Batteries reach peak
performance after several full
charge/discharge cycles.
For further information on
batteries, please refer to main
Operating Instructions.
Please ensure the batteries are
inserted as shown.
Network Dependent Features
Some features described in these Operating Instructions/Quick Guide are
dependent upon subscription to your Network provider (eg. Caller ID,
Call Waiting).
All features of this type will be marked throughout the
Operating Instructions/Quick Guide with this icon.
Contact Information
If you experience any problems with your product, please contact our
Customer Care Helpline (Monday - Friday 9:00am -
5:30pm) on:
U.K. 08700 100076/R.O.I. 01289 8333
Order accessory items for all Communications Products with
ease and confidence either by telephoning our Customer Care
Helpline or by going online through our Internet Accessory
ordering service
Most major credit and debit cards are accepted.
All enquiries, transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
It couldn’t be simpler!
Helpline Tel.No. : U.K. 08700 100 076
R.O.I. 01289 8333
a
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page b
Location of Controls
Handset controls
#
# - Receiver
$ - Function/OK Button
% - Talk Off/Power Button
& - Cancel Button
' - Intercom Button
( - Charge Contact
) - Display
* - Speed Dial Button
+ - Talk Button
, - Navigator Key
- - Redial/Pause Button
. - Recall Button
)
*
+
,
-
$
%
&
/ - Charge Contact
0 - Microphone
.
/
0
Base unit controls
'
(
- Page button
Handset Display
Icon
Displays
Flashes
Within range of a base unit
Intercom mode
Out of range
Î
Ï
Paging or another unit pages the
handset
Making or answering calls
Less than 30% battery capacity
30% to 50% battery capacity
50% to 100% battery capacity
In Direct Call mode
Outside call is received
Û - Recharge battery
Û
Ú
Ò
Ë
Ò - Fully charged
In Call Prohibition mode
In setting mode
Ô
Â
Ringer tone temporarily OFF
Key Lock ON
È
Ó
Á
Speed Dial list/mode
b
Helpline Tel.No. : U.K. 08700 100 076
R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page c
Quick Guide
Function
Action
Switch handset on / off Z
until a confirmation tone sounds.
Answer a call
Z‰.
Make a call
Dial the number and Z‰.
Hang up
Z
.
Turn Key Lock on/off
Redial last number
Store a number
Dial a stored number
ZY and hold for more than 2 seconds.
Z‰, ZX.
ZY. ZV enter number, ZY.
ZÁ. ZS/U to select a number, Z‰.
Dial from the Redial List ZX. ZS/U to select a number, Z‰.
Adjust Receiver volume ZS/U during a call.
Call another handset
Transfer a call
ZN then the handset number.
ZNenter the handset number, Z
.
Three way call
ZNenter the handset number, ZC.
Dial from the Caller ID List ZS/U to select a number, Z‰.
Á Speed Dial Reference Table
00
01
02
03
04
15
16
17
18
19
05
06
07
08
09
10
11
12
13
14
Helpline Tel.No. : U.K. 08700 100 076
R.O.I. 01289 8333
c
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page d
Your Guide to the Display
Note: The LCD display of the handset can display up to 7 segments and each
character will be displayed as shown in the following table. Some characters will
be displayed in a different way; for example, the character M is displayed n.This
is not a defect of the handset display, it is simply the representation of the
characters used in this kind of display. The LCD descriptions listed below are
displays that do not show the correct letter form or are abbreviated descriptions.
The meanings of these displays have been added for your reference.
9
Display
Display
Display
Display
Meaning
Message
Meaning
Message
Alarm
Automatic
Ni-Cd
Ni-MH
alarm
auto
ni-cd
ni-nh
Automatic Talk
Battery Low
Battery Type
Base Number
Base Unit Pin
Call Option
No Item
auto talk
battery low
battery type
bs no
no item
Other Option
Phone Number
Range Alarm
Register
other opt
phone no
range alarm
register hs
bs pin
Handset
call opt
call waiting
clock
direct no
display opt
edit call no
ext ringer
hs no
Call Waiting
Clock
Ringer Option
Ringer Volume
Reset Handset
Select Base
Set Alarm
ringer opt
ringer vol
reset hs
select bs
set alarm
set time
setting bs
setting hs
standby mode
talk mode
talk time
time alarm
tone opt
Direct Number
Display Option
Edit a Call no.
External Ringer
Handset Number
Handset PIN
Change Handset
PIN
Register Hot Key
Internal Ringer
Key Tone
Memory Full
New Speed
Set Time
Setting Base
Setting Handset
Standby Mode
Talk Mode
Talk Time
Time Alarm
Tone Option
Volume
hs pin
hs pin change
hot key reg
int ringer
key tone
memory full
new speed
new pin
vol
New PIN
d
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 15
Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.
Cancel Call Restricted
Numbers
ZF.
Enter PIN.
ZV.
ZW to cancel number.
ZY.
Set the Clock
ZJ.
Enter a new time (4 digits) (24
hour time) (ZK- I).
ZY.
! After a mains power failure the
clock needs to be reset.
Reset the Base Unit
You can reset all of the base unit
settings to their initial factory
settings. (see “Base Unit Initial
Settings”).
ZK.
Enter PIN.
ZY.
! If the base unit is reset, the
Caller ID list will clear.
BaUSetings
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
15
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 16
Handset Initial Settings
To reset handset to initial settings refer to “Handset Settings”.
Function
Initial Setting
Time Alarm Mode
Alarm Time
OFF
Clear
Handset Ringer Volume
Handset External Ringer Pattern
Handset Internal Ringer Pattern
Handset Paging Tone Pattern
Handset Alarm Tone Pattern
Key Tone
3
1
1
1
1
ON
ON
Call Waiting Tone
Range Warning Alarm
Battery Low Alarm
Standby Mode Display
Talk Mode Display
Call Prohibition Mode
Direct Call Mode
OFF
ON
Base Unit Number
Length of the Call
OFF
OFF
Direct Call Number
4 Digit Handset PIN
Auto Talk
Clear
0000
OFF
Base Unit Access
Automatic Base Unit Access
Handset Receiver Volume
Redial Memory
2
All Clear
Base Unit Initial Settings
To reset base unit to initial settings refer to “Base Unit Settings”.
IalSetings
Function
Initial Setting
Ringer Mode
Number of Rings
All Handsets
3
Earth/Time Break Recall
Pause Timing
Call Restricted Handset(s)
Call Restriction Number(s)
Base Unit PIN
Time Break Recall
3 seconds
All Clear
All Clear
0000
Base Unit Ringer Volume
Medium
16
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 17
Operating Additional
Handsets
NOTE: Calls are disconnected
when the handset moves from one
radio cell to another.
Additional KX-A120E handsets are
available to purchase separately. Up
to 6 handsets can be registered to a
single base unit. Using additional
handsets allows you to have an
intercom call while simultaneously
on another handset conducting a call
to an outside line.
Registering a Handset
to a Base Unit
The handset supplied with the base
unit is already registered. If an
optional handset is purchased, it must
be registered as follows.
Operating Additional
Base Units
! Charge the optional handset
batteries for 15 hours before
initial use.
You can register and operate your
handset with up to 4 base units. Each
base unit forms 1 radio cell. If the
individual bases
are linked to
the same
tele-
1
2
From the Standby mode, ZV.
ZSor Uto select setting hs
(Setting Handset).
ZV.
3
4 ZSor Uto select:
phone
line
then
you can
extend
the oper-
ating
registration
2
1
(Registration):
5
ZV.
3
register hs
(Register Handset):
range of
the system
by posi-
tioning
the
bases so
that the
two radio
cells over-
ZV.
Zand hold Ïon the base unit
for 10 seconds. A base registration
tone sounds.
! Handset must be registered
within 1 minute. If over 1 minute
4
Z
then restart registration.
lap. If the
handset is set to
ZSor Uto select base 1-4
(base 1-4).
5
Radio Cell
Eg.
Additional
handsets
(KX-A120E)
registered with
2 base units.
AUTO base selection,
in STANDBY MODE
the handset will
automatically swap to
the second base if the
range on the first base
is exceeded.
ZV.
Enter base unit PIN (4 digits -
factory preset is 0000).
ZV.
When handset and base unit
connect a confirmation tone
sounds.
If handset registration is not
successful within 5 minutes, an
error tone sounds.
It is not possible to transfer calls
between bases (only between handsets
linked to the same base unit).
FOpoaMul-nitUers
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
17
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 18
Cancelling a Handset
Selecting a Base Unit
Each handset can cancel itself or
another handset.
When auto(Automatic Base Unit
Access) is selected, if you move out-
side of the radio range of the current
base unit the handset automatically
searches for other registered bases.
When a specified base unit is selected,
the handset will access that base unit
only.
From the standby mode, ZV.
ZSor Uto select setting bs.
ZV.
ZG when input code is
displayed.
Follow steps 1 to 3 of “Registering
a Handset to a Base Unit”, then:
Enter base unit PIN (4 digits).
ZA - F to select handset
to cancel.
ZSor Uto select:
select bs
ZY.
(Select Base Unit):
Cancelling a Base
Unit
ZV.
ZSor Uto select autoor a
specific base unit 1 -4 (only
registered base unit numbers are
displayed).
Follow steps 1 to 5 of
“Registering a Handset to a Base
Unit”, then:
ZVto confirm selection.
Calls (both incoming and outgoing), can
be conducted only via the selected base
unit, even if the radio cells overlap
with neighbouring base units.
ZSor Uto select:
cancel base
(Cancel a Base Unit)
You can cancel any base unit that your
handset is registered to.
ZV.
Intercom Between
Handsets
Enter handset PIN (4 digits).
FOpoaMul-nitUers
ZSor Uto select base unit(s)
to cancel.
You can use your handsets as a 2-way
intercom. For example, when Handset
1 calls Handset 2:
ZVto set selection.
Selected base number(s) flash(es).
ZV.
Handset 1-
ZN. Ïblinks.
ZSor Uto select yes(Yes) or
no(No).
ZB(desired handset
number).
ZVto confirm selection.
Handset 2 (ringing) -
ZOto answer.
Handset 1 and 2 -
If selection was yes, clearedis
displayed briefly.
Z
to end the call.
! Intercom calls can be conducted
within the radio cell of the current
base unit, but not with units in
neighbouring radio areas.
18
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 19
Transferring Calls to
Conference Calls
Another Handset
The intercom can be used during a
call to transfer an external call
between handsets that are registered
to the same base unit.
During a conversation in an external
call, you can make an intercom call
to another handset and then combine
the calls together to establish a
conference call:
For example, when handset 1
transfers a call to Handset 2:
Handset 1 -
Handset 1 -
During the call,ZNthen
ZB(desired handset
number).
The call is put on hold.
If there is no answer , ZNto
return to the caller.
During the call, ZN.
Ïis displayed and the call is put on
hold.
ZB(desired handset
number).
A ring back tone is heard until
Handset 2 answers.*
Handset 2 (ringing) -
Z‰or Nto answer.
Handset 2 (ringing) -
Handset 1 -
Z‰or Nto answer.
ZCto establish the
conference call.
Handset 1 & Handset 2 -
(Have conversation).
Handset 1 or Handset 2 -
Z
to end the conference call.
Handset 1 -
Z
to release the call for
transfer
OR
ZNto connect to external
caller again.
To transfer the call directly, without
speaking to the other handset:
Handset 1 -
Z
at *.
Handset 2 -
Z‰.
The transfer is complete.
If the transferred call is not
answered within 30 seconds,
Handset 1 will ring again. Z‰to
answer the call.
FOpoaMul-nitUers
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
19
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 20
Before Requesting Help
If you experience any problems with the normal use of your apparatus, you
should unplug it from the telephone outlet and connect a known working
telephone in its place. If the known working telephone still has problems, then
please contact the customer service department of your Network provider. If it
operates correctly, then the problem is likely to be a fault in your apparatus. In
this case, contact your supplier for advice. Your Network provider may charge
you if they attend a service call that is not due to apparatus supplied by them.
Problem
Possible cause
Solution
NO LCD display in
handset.
Handset will not turn
on.
• Handset not turned on.
• Batteries not inserted.
• Batteries not charged.
• Turn on power (pg. 4).
• Insert x 2 rechargeable
batteries supplied (pg. 3).
• Place handset in base and
connect AC adaptor to base
and AC outlet (full charge
period 15 hrs).
Batteries charge icon
not counting up.
• Dirty charge contact.
• Clean charge / battery
contact and retry charge.
• Connect AC adaptor to base
unit and AC outlet.
• Base not powered up.
Îicon flashing.
• Handset not registered to
base.
• Register handset to base.
• Handset out of range of
base.
• Handset out of range of
base.
• Move handset closer to
base.
• Move handset closer to
base.
• Wait for other user to
complete call.
Handset busy tone
heard when ‰is
pressed.
• Another handset in use.
No dial tone.
• Telephone line not
connected.
• Insert telephone cord to
network.
BforRqustingHelp
Cannot dial out.
• Call prohibition mode set.
• Particular dialled number
is restricted.
• Turn feature off.
• Remove number from call
restricted list.
• Key lock mode ON.
• Base ringer turned off.
• Turn key pad lock OFF.
• Set ringer to one of 3
volume levels (see “Base
Unit Settings”).
Base unit will not
ring.
Handset will not
ring.
• Ringer switched off.
• Set ringer to one of 6
volume levels (see “Handset
Settings”).
Last number redial
does not work.
No Caller ID number
displayed.
• Number exceeded 24
digits.
• Service not supplied.
• Caller has withheld info.
• Redial manually.
• Caller ID service must be
arranged with Network
provider.
• Battery low.
• Recharge batteries.
Ûicon flashes.
20
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 21
Problem
Possible cause
Solution
• Delete unused base
registrations from handset.
Cannot register
handset to base.
• Max. number of bases
already registered to
handset.
• Delete unused handset
registrations from base.
• Max. number of handsets
already registered to base
unit.
• If PIN number is lost,
contact the Panasonic
• Wrong PIN number
entered (Default 0000).
Customer Care Helpline.
• Move base / handset away
from sources of electrical
noise ( e.g TV, radio ).
• Electrical noise in local
area.
If you still have a problem please contact our Customer Care Helpline
(Monday - Friday 9:00am - 5:30pm) on : U.K. 08700 100 076
R.O.I. 01289 8333
Technical Information
Specifications:
Standard:
DECT=(Digital Enhanced Cordless
Telecommunications).
GAP=(Generic Access Profile).
120 Duplex Channels.
1.88 GHz to 1.9 GHz.
TDMA (Time Division Multiple Access).
1728 kHz.
Number of channels:
Frequency range:
Duplex procedure:
Channel spacing:
Bit rate:
1152 kbit/s.
Modulation:
RF Transmission Power:
Voice coding:
GFSK.
approx. 250mW.
ADPCM/32kbit/s.
Operating range:
Up to 300m outdoors (line of sight), up to
50 m indoors.
Power source:
AC Adaptor 220-240 V AC~50/60Hz.
5 VA.
Power consumption, base unit:
Operating conditions:
Dimensions, Base Unit:
Dimensions, Handset:
5o - 40oC, 20 - 80% relative air humidity (dry)
About 103mm x 122mm x 60mm x 180g
About 134mm x 46mm x 30mm x 85g
(without batteries)
Telephone line cord length:
AC adaptor cord length:
About 2.3m
About 1.9m
• Specifications are subject to change.
• The illustrations used in this manual may differ slightly from the original device.
Connections:
• The telephone will not work during a power failure.
We therefore recommend you use a standard telephone and T Adaptor to connect
this Digital Cordless Phone to the line. Your Panasonic Sales Shop can offer you
more information about connection possibilities.
BofrRqustingHelp
Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333
21
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 22
Index
AC Adaptor
Accessories
Additional
2,3,20,21
2,a
Conference Calls
Connection
Controls Location
19
3
b
Base Units
Features
17
9
Dialling
Handsets
17
10
4
pause
Direct Call Number
Display
9
11
Alarm Settings
Answering Calls
Auto Talk
12
guide
standby mode
talk mode
d
11
11
Base Unit
connection
initial settings
PIN
3
16
14
Earth Recall Mode
Edit Speed Dial Number
13
7
reset
15
18
13,14,15
selection
settings
Batteries
caution
Guarantee
24
Handset
display
2
4,a
3,a
4
12
11
11
16
5
4
5
12
charging
insert
life
initial settings
locator
ON/OFF
paging
type
Battery Low Alarm
reset
ringer
tones
10
11
Call Bar
11
Caller ID List
clear a number
clear all numbers
edit a number
making a call from
menu / redial list menu
save a number
Call Restriction
Calls
PIN
settings
Help
Hot Key Dialling
Helpline Number
12
10,11,12
20
6
6
6
5
6
6
14
8
2,12,14,a,21
Icons
Intercom
b
18
answer
finishing
hang up
4
5
c
Key
lock
tone
c,9
11
Index
making
redial
5
5
Making Calls
5
5
5
threeway
c
19
9
18
18
7
from the redial list
from the caller ID list
from the speed dial list
transferring
Call Waiting
Cancel a Base Unit
Cancel a Handset
Clear Speed Dial Number
Clock
7
Network Dependent features
3,a
15
22
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 23
Index
ON / OFF
Three Way Conversation
Time Break Recall (TBR)
Tone Option
19
9,13
alarm
auto talk
10
12
call prohibition
direct call
key lock
power
11
11,12
9
battery low
call waiting tone
key tone
11
11
11
11
19
4
11
range alarm
tones
Transferring a Call
Paging
Pause Timing
Power ON / OFF
5
14
4
Volume
base unit
handset
13
10
Quick Guide
controls
display
c
b
d
b
Wall Mounting
3
icons
Range Warning Alarm
Recall
Receiver Volume
Redialling
11
9
5
5
Registering a Handset
Register Speed Dial Number
Reset Base
Reset Handset
Ringer Pattern
alarm
17
7
15
12
10
10
10
10
external
internal
paging
Safety
Setting Up
2
3
Specifications
21
Speed Dial
clear speed dial number
dialling stored numbers
edit speed dial number
reference table
7
7
7
c
register speed dial number
saving numbers to speed dial
storing new numbers
7
7
7
Idnex
Technical Information
21
Telephone Line Cord
2,3,21
23
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 24
Guarantee
CONDITIONS OF GUARANTEE
This guarantee is in addition to and does not in any way affect any statutory or
other rights of consumer purchasers. If within the applicable guarantee period, the
appliance proves to be defective by reason of faulty design, workmanship or
materials, we undertake subject to the following conditions to have the defective
appliance (or any part or parts there of) repaired or replaced free of charge.
1. The appliance shall have been purchased and used solely within either the UK
or ROI and in accordance with standard operating instructions and the technical
and/or Safety Standards required in the UK.
2. The appliance should be returned together with this guarantee and proof of date
of purchase promptly on being found defective at the purchaser’s risk and
expense to the authorised dealer from whom the appliance was purchased or to
the nearest authorised dealer. All enquires must be through such dealers.
3. This guarantee shall not apply to damage caused through fire, accident,
lightning, misuse, wear and tear, neglect, incorrect adjustment or repair, to
damage caused through installation, adaption, modification or use in an
improper manner or inconsistent with the technical and/or safety standards
required in the country where this appliance is used, or to damage occurred
during transit to or from the purchaser.
4. If at any time during the guarantee period any part or parts of the appliance are
replaced with a part or parts not supplied or approved by us or of an objective
quality safe and suitable for the appliance, or the appliance has been dismantled
or repaired by any person not authorised by us, we shall have the right to
terminate this guarantee in whole or in part immediately without further notice.
5. The purchaser’s sole and exclusive remedy under this guarantee against us is
for the repair or replacement of the appliance or any defective part or parts and
no other remedy, including, but not limited to, incidental or consequential
damage or loss of whatsoever nature shall be available to the purchaser.
6. This guarantee shall not apply to batteries and any other items of limited
natural life.
7. Our decision on all matters relating to complaints shall be final. Any appliance
or defective part which has been replaced shall become our property.
8. The guarantee period applicable to this product shall be 12 months.
Gurante
Please keep these Operating Instructions with your receipt.
Panasonic Business Systems U.K.
Receipt No.
Date of Purchase
Serial No.
Model No. KX-TCD650E
24
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 25
25
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 26
26
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 27
27
Download from Www.Somanuals.com. All Manuals Search And Download.
650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 28
MODEL No. KX-TCD650E
Hereby, Kyushu Matsushita Electric (U.K.) Limited declares that this (KX-TCD650E) is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
A copy of the manufacturer’s declaration of conformity to the essential requirements of the
For your future reference
Serial No.
Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Customer Care Helpline Tel. No.: U.K. 08700 100 076
R.O.I. 01289 8333
0436
1999/5/EC
Technical specifications are subject to change.
Sales Department:
Panasonic Business Systems U.K.
Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP
Kyushu Matsushita Electric (U.K.) Ltd.
Pencarn Way, Duffryn, Newport, South Wales, NP10 8YE, United Kingdom
Printed in Thailand
QUQX00018ZD LL0202LL204KP1
Download from Www.Somanuals.com. All Manuals Search And Download.
|