Panasonic CD Player SC AK610 User Manual

CD Stereo System

Operating Instructions

The illustrations show SC-AK510.

Model No. SC-AK610

SC-AK510

For U.S.A.

SC-AK410

SC-AK403

As an ENERGY STAR^®Partner, Panasonic has determined

that this product meets the ENERGY STAR^®guidelines for

energy efficiency.

Before connecting, operating or adjusting this product, please read these

instructions completely.

Please keep this manual for future reference.

SC-AK610 and SC-AK403 are available in the U.S.A. only.

P PC

RQT6707-3P

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions

listed below. Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

4) Follow all instructions.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

13) Unplug this apparatus during lightning storms or when unused

for long periods of time.

8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

14) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally,

or has been dropped.

9) Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.:

Listening caution

CAUTION:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television

reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Selecting fine audio equipment such as the unit you’ve just pur-

chased is only the start of your musical enjoyment. Now it’s time to

consider how you can maximize the fun and excitement your equip-

ment offers. This manufacturer and the Electronic Industries Associ-

ation’s Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the sound

come through loud and clear without annoying blaring or

distortion—and, most importantly, without affecting your sensitive

hearing.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and re-

ceiver.

•

We recommend you to avoid prolonged exposure to excessive noise.

•

Sound can be deceiving. Over time your hearing “comfort level”

adapts to higher volumes of sound. So what sounds “normal” can

actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level BEFORE

your hearing adapts.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician

for help.

•

To establish a safe level:

Any unauthorized changes or modifications to this equipment

would void the user’s authority to operate this device.

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and

clearly, and without distortion.

•

This device complies with Part 15 of the FCC Rules. Opera-

tion is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

Once you have established a comfortable sound level:

Set the dial and leave it there.

•

Taking a minute to do this now will help to prevent hearing damage

or loss in the future. After all, we want you listening for a lifetime.

Product Service

1. Damage requiring service —The unit should be serviced by

qualified service personnel if:

4. Safety check —After repairs or service, ask the servicer to

perform safety checks to confirm that the unit is in proper working

condition.

(a)The AC power supply cord or AC adaptor has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

Product information

(d)The unit does not operate normally or exhibits a marked change

in performance; or

For product information or assistance with product operation:

(e)The unit has been dropped or the cabinet damaged.

2. Servicing —Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servicing

to authorized servicing personnel.

In the U.S.A., contact the Panasonic Customer Call Center at

1-800-211-7262, or e-mail [email protected],

or web site (http://www.panasonic.com).

3. Replacement parts —When parts need replacing ensure the

servicer uses parts specified by the manufacturer or parts that

have the same characteristics as the original parts. Unauthorized

substitutes may result in fire, electric shock, or other hazards.

In Canada, contact Panasonic Canada Inc. Customer Care Centre

at 905-624-5505, web site (www.panasonic.ca), or an authorized

Servicentre closest to you.

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

Supplied accessories

The remote control

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking

for replacement parts.

Batteries

(Only for U.S.A.)

To order accessories contact 1-800-332-5368 or

web site (http://www.panasonic.com).

R6, AA, UM-3

AC power supply cord .. 1 pc.

FM indoor antenna .. 1pc.

(RJA0065-1D)

(RSA0006-J)

AM loop antenna .. 1 pc.

Remote control

(N1DADYY00002)

transmitter ..................... 1 pc.

SC-AK610

SC-AK510

(N2QAHB000036)

Insert so the poles (+ and –) match those in the remote control.

Do not use rechargeable type batteries.

•

SC-AK410

For U.S.A.:

•

• Black: (EUR7710010)

• Silver: (EUR7710020)

For Canada:

Do not:

Batteries ............. 2 pcs.

R6, AA, UM-3

mix old and new batteries.

use different types at the same time.

heat or expose to flame.

take apart or short-circuit.

attempt to recharge alkaline or manganese batteries.

use batteries if the covering has been peeled off.

keep together with metallic objects such as necklaces.

•

(EUR7710020)

SC-AK403

(EUR7710010)

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any

part of your body.

Placement of speakers

Remove if the remote control is not going to be used for a long

period of time. Store in a cool, dark place.

Replace if the unit does not respond to the remote control even

when held close to the front panel.

SC-AK610 SC-AK510

Place the front speakers so that the tweeter is on the outside.

SC-AK410 SC-AK403

Place the front speakers so that the super tweeter is on the outside.

Use

Super tweeter

Tweeter

Remote control

signal sensor

(SB-AK610/

SB-AK510)

(SB-AK410)

(SB-AK610/

SB-AK510)

Main unit

Front speaker

(left)

Front speaker

(right)

only

SC-AK610

Subwoofer

Transmission

window

About 7 meters in front of

the signal sensor

Place on the floor or a sturdy shelf so that it won’t

cause vibration.

If irregular coloring occurs on your television

The subwoofer is designed to be used close to a

television, but the picture may be affected with

some televisions and set-up combinations.

If this occurs, turn the television off for about

30 minutes.

The television’s demagnetizing function should

correct the problem. If it persists, move the

speaker further away from the television.

Aim at the sensor, avoiding obstacles, at a maximum range of 7

meters directly in front of the unit.

Keep the transmission window and the unit’s sensor free from dust.

Operation can be affected by strong light sources, such as direct

•

(SB-WAK610)

•

sunlight, and the glass doors on cabinets.

•^NoK^te^eep your speakers at least 10 mm (¹³/32˝) away from the system

for proper ventilation.

• The front speakers do not have magnetic shielding. Do not place

them near televisions, personal computers or other devices easily

influenced by magnetism.

Do not:

put heavy objects on the remote control.

take the remote control apart.

•

spill liquids onto the remote control.

•

• You cannot take the front net off the speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

Set-up

Connect the AC power supply cord only after all other connections have been made.

Preparation

Twist and pull off the vinyl tip of the antenna wires and speaker cords.

The illustration shows SC-AK510.

AM loop antenna

Stand the antenna up

on its base.

(L)

FM indoor antenna

(R)

Adhesive tape

Affix where

reception is best.

AC power supply cord

Note

The included AC power supply cord

is for use with this unit only.

Do not use it with other equipment.

For your reference

Information you enter into the unit’s

memory, except for time, remains

intact for up to a week after the AC

power supply cord is disconnected.

Connect the left (L) side

in the same way.

3 Speaker cords

Blue

Gray

Red

SC-AK610 SC-AK510

Subwoofer

only

SC-AK610

–

Red (+)

SUB

OOFER

Blue (+)

Black

Gray

(+)

(SB-WAK610)

Black (–)

SC-AK410 SC-AK403

Blue

Use only the supplied speakers.

Black

The combination of the main unit and speakers provide the best sound.

Using other speakers can damage the unit and sound quality will be

negatively affected.

Connect the left (L) side

in the same way.

Red

Gray

Caution

Red (+)

Use the speakers only with the recommended

•

system. Failure to do so may lead to damage

to the amplifier and/or the speakers, and may

result in the risk of fire. Consult a qualified

service person if damage has occurred or if

Black (–)

you experience

performance.

sudden change in

Do not attach these speakers to walls or

ceilings.

•

Blue (–)

Gray (+)

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

Front panel controls

Main unit

AC supply indicator (AC IN)

This indicator lights when the unit is connected to the AC power

supply.

Standby/on switch (f/I, POWER)

Press to switch the unit from on to standby mode or vice versa. In

standby mode, the unit is still consuming a small amount of power.

Display

Remote control signal sensor............................................... 4

Super sound EQ button (SUPER SOUND EQ) ................... 14

only

SC-AK610

Subwoofer button (SUBWOOFER) ..................................... 14

only

SC-AK510

Super woofer button (SUPER WOOFER) ............................14

Preset EQ select button (PRESET EQ)............................... 14

Deck 1 cassette holder .........................................................14

Disc tray

CD tray open/close button (c, OPEN/CLOSE) .................... 8

CD direct play buttons (1 ~ 5) ............................................... 8

Joystick ...........................................................................11, 12

Enter button (ENTER) .....................................................11, 12

Title search mode select button (TITLE SEARCH) .............12

Marker memory/recall button

(MARKER, –MEMORY, -RECALL) ....................................... 13

Delete button (DELETE) ............................................ 9, 11, 13

Headphones jack (PHONES) ................................................15

Deck 2 cassette holder .........................................................14

(

)

Center console

Tuner/band select button (TUNER/BAND) ........................... 7

CD skip/search, tape fast-forward/rewind,

tune/preset channel select, time adjust buttons

(g/REW/3, f/FF/4)........................... 7-9, 11, 14, 16, 17

REC

;

Record button (a REC) .........................................................14

Deck select button (DECK 1/2) ............................................14

Display, demonstration button (-DISP/–DEMO) ................. 16

Deck 1 open button (c, DECK 1) ....................................... 14

AUX button (AUX) ................................................................ 15

Volume control (VOLUME DOWN, UP) ............................... 16

CD play/pause button (:/ J, CD) .......................................... 8

Stop/program clear button (L, STOP) .................. 8, 9, 11, 14

Deck 2 open button (c, DECK 2) ....................................... 14

Tape play button (:, TAPE) ................................................ 14

DECK 1/2

TUNER

BAND

REW

STOP

DISP/

DEMO

TAPE

AUX

DECK

Remote control

Buttons such as 2 function in exactly the same way as the

buttons on the main unit.

CLOCK

PLAY

[

]

Sleep timer + Auto off button (SLEEP, AUTO OFF) .....16, 17

Disc button (DISC) ................................................................. 9

Program button (PROGRAM) .......................................... 9, 11

Play mode select button (PLAY MODE) ............ 7, 9, 10, 14, 15

Use this for selecting CD play mode, tune mode, FM mode and

AM beat proof.

AUTO OFF TIMER

REC

SLEEP

CD DISP

DIMMER

ABC

DEF

DISC

GHI

JKL

MNO

{

}

Repeat button (REPEAT) ....................................................... 9

PROGRAM

Album skip buttons (

, ALBUM).................................10

WXYZ

PQRS

TUV

Intro button (INTRO) .............................................................11

PLAY MODE

Shift button (SHIFT)

To use functions labeled in orange

SPACE

REPEAT

While pressing [SHIFT], press the corresponding button.

DEL

: For buttons [AUTO OFF],

[CLOCK/TIMER], [rPLAY/REC]

and [S.WOOFER]

: For buttons [AUTO OFF], [CLOCK/

TIMER] and [rPLAY/REC]

SC-AK610

SC-AK510

SC-AK403

SC-AK410

SC-AK610

TUNER

BAND

TAPE

CLEAR

Super sound EQ + Subwoofer button

(S.SOUND EQ, S.WOOFER) ................................................ 14

AUX

SC-AK510

Super sound EQ + Super woofer button

VOL

CURSOR

ALBUM

(S.SOUND EQ, S.WOOFER) ................................................ 14

Dimmer + Play timer/record timer button

REW

(DIMMER, rPLAY/REC) ..................................................16, 17

CD display + Clock/timer button

TITLE

INTRO

MARKER

S.WOOFER

ENTER

(CD DISP, CLOCK/TIMER) ................................... 8, 13, 16, 17

Numbered, character buttons

SHIFT S.SOUND EQ PRESET EQ MUTING

(

X10, 1–9, 0, A-Z, SPACE!”#) ........................................ 7, 9-12

CD skip/search, tape fast-forward/rewind,

(For SC-AK410

and SC-AK403)

tune/preset channel select, time adjust, cursor buttons

(g, REW/3,

CURSOR,

(For SC-AK610

and SC-AK510)

f, 4/FF, CURSOR ) ............................. 7-9, 11-14, 16, 17

Muting button (MUTING) ..................................................... 16

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

The radio: manual tuning

The radio: preset tuning

Remote control only

There are two methods of pre-setting stations.

Automatic presetting : All the stations the tuner can receive are

preset.

Manual presetting

: You can select the stations to preset and the

order they are preset in.

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

ABC

DEF

DISC

Up to 15 stations each can be set in the FM and AM bands.

GHI

JKL

MNO

PROGRAM

PQRS

TUV

PLAY MODE

CLOCK

PLAY/

REC

SPACE

REPEAT

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

DEL

ABC

DEF

DISC

TUNER

BAND

TAPE

CLEAR

AUX

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

VOL

ALBUM

CURSOR

REW

PLAY MODE

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SPACE

REPEAT

SHIFT S.SOUND EQ PRESET EQ MUTING

DEL

TUNER

BAND

TAPE

CLEAR

AUX

1 Press [TUNER/BAND] to select band.

VOL

CURSOR

ALBUM

REW

The unit comes on.

Every time you press the button:

FM ↔ AM

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Preparation:

Press [TUNER BAND] to select “FM” or “AM”.

2 Press [PLAY MODE] on the remote control to select

“MANUAL”.

Casse

Every time you press the button:

MANUAL ↔ PRESET

Automatic presetting

Do the following once each for FM and AM.

3 Hold down [g/REW/3] or [f/FF/4] for a moment

Preparation: Tune to the frequency where pre-setting is to begin.

to search for a station.

Hold down [PROGRAM] until the frequency changes.

The tuner presets all the stations it can receive into the channels in

ascending order. When finished, the last station memorized is tuned in.

The frequency stops when it finds a clear station.

To stop during the process, press [g/REW/3] or [f/FF/4].

Under excessive interference, a station may not be found.

Press [g/REW/3] or [f/FF/4] repeatedly to tune step-by-

step.

“TUNED” is displayed when a radio station is tuned.

“ST” is displayed when a stereo FM broadcast is being

received.

Manual presetting

Pre-set the stations one at a time.

If noise is excessive in FM

Remote control only

1 Press [PROGRAM] then press [g, REW/3] or

[f, 4/FF] to tune to the desired station.

2 Press [PROGRAM] then press [g, REW/3] or

Hold down [PLAY MODE] to display “MONO”.

Monaural sound is selected and noise reduces when reception is

weak.

[f, 4/FF] to select a channel.

Hold down [PLAY MODE] again to cancel the mode.

“MONO” is also cancelled if the frequency is changed.

3 Press [PROGRAM].

Reco

The station occupying a channel is erased if another station is preset

in that channel.

To receive FM broadcasts allocated in 0.1 MHz steps

Main unit only

Hold down [TUNER/BAND]. The display changes in a few seconds to

show the current minimum FM frequency. Continue to hold down the

button until the minimum frequency changes. The step is changed.

Repeat the above to change the step back.

Selecting channels

Press the numbered buttons to select the channel.

To enter channel 10 or over, press [X10], then the two digits.

Note

After changing the “allocation” setting, the frequencies you previously

preset in the memory will be cleared.

•

Sound is momentarily interrupted if you load/unload tapes while

listening to an AM broadcast.

•

1 Press [PLAY MODE] to select “PRESET”.

2 Press [g, REW/3] or [f, 4/FF] to select the

channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

CDs

CD selection

Choose CDs with this mark:

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

D DISP

IMMER

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

PLAY MODE

SPACE

REPEAT

DEL

Do not:

use irregularly shaped CDs.

attach extra labels and stickers.

use CDs with labels and stickers

that are coming off or with

adhesive exuding from under

labels and stickers.

attach scratch proof covers or

any other kind of accessory.

write anything on the CD.

clean CDs with liquids. (Wipe

with a soft, dry cloth.)

use CDs printed with label

•

TUNER

BAND

TAPE

CLEAR

AUX

•

VOL

ALBUM

CURSOR

REW

XXXX XXXX XXXXX

XXXX XX

•

XXXX XXXX XXXXX

XXXX XXXX

TITLE

INTRO

MARKER

S.WOOFER

ENTER

1 Press [c, OPEN/CLOSE] to open the tray.

•

The unit comes on.

2 Set a CD in the tray. (Label must face upward.)

•

To continue loading CDs in the other trays

•

Press [1]–[5] to select the required tray and press [c, OPEN/

CLOSE] to open the tray.

Press [c, OPEN/CLOSE] to close the tray.

•

printers available on the market.

3 Press [1]–[5] to play your desired disc.

Current disc indicator

To prevent damage

Always observe the following points:

Load only 1 CD on the tray.

•

(Alternatively, you can press [:/J, CD] if the current disc is your

desired CD.)

The track number and its elapsed playing time are shown.

Use the CD Play Mode function’s ALL-DISC mode to play CDs in

succession. (A page 9)

To stop the disc play

Press [L, STOP].

The total number of tracks and total playing time are shown.

Load CDs as shown in the figure.

An adaptor is not needed with 8cm CDs (singles).

•

“

” indication

It indicates current disc has 16 or more tracks.

8 cm CD

X X X X

X X X

One touch play

X X X X

X X

X X X X X X X X

X X X

X X X X X X X X

During standby mode and when a CD is loaded, press [:/J, CD] or

[1] - [5].

The unit comes on and play starts.

To pause

Press [:/J, CD] during play.

Press again to resume play.

XXXXXX XXX XXXXXXX

XXXX XX XXXXX

X X X X X X X X X X X X X X X X

X X X X X X X

XXXX XX XXXXX

XXXX XXXX XXXXX

XXXX XX XXXXX

12 cm CD

XXXX XXXX XXXXX

X X X X X X X

X X X X

X X X X X X

X X X X X

X X X X

X X X X X X X X X X X X

X X

To search forward/ Hold down [g/REW/3] (backward)

backward

or [f/FF/4] (forward) during play or pause.

To skip forward/

backward

Press [g/REW/3] (backward) or

[f/FF/4] (forward) during play or pause.

Set the system on a flat, level surface.

Always unload all CDs before moving the unit.

•

Note

During 1-RANDOM or A-RANDOM play (A page 9), you cannot

skip to tracks already played.

During program play (A page 9), 1-RANDOM or A-RANDOM play,

you can search only within the track.

Always stop the changer before loading or changing CDs. You

cannot change CDs while a disc is playing.

•

Do not:

set the unit on top of magazines, inclined surfaces, etc.

•

move the unit while a tray is opening/closing, or when loaded.

put anything except a CD in the tray.

use cleaning CDs or CDs which are badly warped or cracked.

disconnect the AC power supply cord from the household AC outlet

during disc changing operation.

CD display

You can display the remaining play time of the current track.

This unit can play WMA (SC-AK610 and SC-AK510 only), MP3

and CD-DA (digital audio) format audio CD-R and CD-RW that

have been finalized (a process that enables CD-R/CD-RW players

to play audio CD-R and CD-RW) upon completion of recording.

It may not be able to play some CD-R or CD-RW due to the

condition of the recording.

Remote control only

Press [CD DISP] during play or pause.

Every time you press the button:

Elapsed play time ↔ Remaining play time

Note

When track number 25 or greater is playing, remaining play time

display shows “– –:– –”.

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

CLOCK

PLAY

CLOCK

PLAY/

REC

AUTO OFF TIMER

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

SLEEP

CD DISP

DIMMER

ABC

DEF

ABC

DEF

DISC

GHI

JKL

MNO

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

PQRS

TUV

WXYZ

PLAY MODE

SPACE

REPEAT

DEL

TUNER

BAND

TUNER

BAND

TAPE

CLEAR

AUX

CLEAR

AUX

VOL

CURSOR

VOL

CURSOR

ALBUM

REW

TITLE

INTRO

MARKER

S.WOOFER

ENTER

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Repeat play

Starting play from a specific track

Remote control only

Press [REPEAT] during play.

1 Press [DISC] and (within 10 seconds) [1]–[5] to select the

“

” is displayed.

disc.

To cancel repeat play

Press [REPEAT] to clear “ ” .

2 Select the track with the numbered buttons.

To select track 10 or over, press [X10] then the two digits.

Play starts from the selected track.

Casse

To listen to specific CDs and tracks

(CD Play Mode function)

Note

You cannot use this function with 1-RANDOM or A-RANDOM mode.

Remote control only

Program play

Preparation: Press [:/J, CD] and then [L, CLEAR].

You can program up to 24 tracks.

Remote control only

1 Press [PLAY MODE] to select the desired mode.

Every time you press the button:

Preparation: Press [:/J, CD] and then [L, CLEAR].

ALL-DISC

1-SONG

1-RANDOM

1-DISC

ALL-DISC: Plays all loaded discs in succession from the

A-RANDOM

Press [PROGRAM].

“PGM” appears.

Press [DISC] and (within 10 seconds) [1]–[5] to select the

disc.

selected disc to the final disc

Plays one selected track on the selected disc.

1-SONG:

1-RANDOM: Plays one selected disc in random order.

A-RANDOM: Plays all loaded discs in random order.

1-DISC:

Select the tracks with the numbered buttons.

To select track 10 or over, press [X10] then the two digits.

Repeat steps 2 and 3 to program other tracks.

Plays one selected disc.

(The original display is restored in about 2 seconds.)

Proceed to step 4 when you selected A-RANDOM in step 1.

Press [:/J, CD] to start play.

Reco

2 Press [DISC] and (within 10 seconds) [1]–[5] to select the

To exit program mode

Press [PROGRAM] in the stop mode. (You can replay your program

by pressing [PROGRAM] then [:/J, CD].)

disc.

The CD starts.

Only when you selected “1-SONG” in step 1

You can do the following while

“P” is displayed

Select the track with the numbered buttons.

To select a track 10 or over, press [X10] then the two digits.

To check program contents

•

Play starts from the selected track.

Press [g, REW/3] or [f, 4/FF].

Every time you press the button, the track number and program

order are displayed.

Only when you selected “A-RANDOM” in step 1

Press [:/J, CD] to start play.

To add to the program

Do steps 2 and 3.

•

To clear the last track

•

To stop play

Press [L, CLEAR].

Press [DEL].

To clear all tracks

•

When playback ends

The current play mode will be retained in memory until it is changed

even if the unit is turned off.

Press [L, CLEAR].

“CLEAR ALL?” is displayed.

Within 5 seconds, press the button again to clear all tracks.

Final disc

For example, if play starts from disc 4, disc 3 will be the “final disc”.

Order of progression: Disc 4z5z1z2z3

Note

You can use repeat mode with program play.

You cannot program CD-DA together with MP3/WMA tracks.

(WMA: SC-AK610 and SC-AK510 only)

•

Note

You can use repeat mode with CD Play Mode function.

You cannot use program mode together with CD Play Mode function.

•

To mark a track

See page 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

RQT6707

WMA: SC-AK610 and SC-AK510 only

How discs with MP3/WMA differ from CDs

This unit can play MP3 and WMA files recorded on CD-R/RW with a

computer.

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

ABC

DEF

DISC

Files are treated as tracks and folders are treated as albums.

This unit can access up to 999 tracks, 255 albums and 20 sessions.

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

PLAY MODE

SPACE

REPEAT

When making MP3/WMA files to play on this unit

DEL

Disc format

TUNER

BAND

TAPE

CLEAR

AUX

Discs must conform to ISO9660 level 1 or 2 (except for extended

formats).

VOL

CURSOR

ALBUM

REW

File format

TITLE

INTRO

MARKER

S.WOOFER

ENTER

• MP3 files must have the extension “.MP3” or “.mp3”.

• WMA files must have the extension “.WMA” or “.wma”.

SHIFT S.SOUND EQ PRESET EQ MUTING

root

To play in a certain order

Example:

MP3

001.mp3

002.mp3

003.mp3

001

Prefix the folder and file names with 3-digits

numbers in the order you want to play them.

Files may not be recorded in numbered order if

the prefixes have different numbers of digits. For

example: 1????.mp3, 2????.mp3, 10????.mp3.

However, some writing software may also

cause recording to occur in a different order.

CD Play Mode function for MP3/WMA

002

001.mp3

Remote control only

002.mp3

003.mp3

004.mp3

003

Preparation: Press [:/J, CD] and then [L, CLEAR].

001.mp3

002.mp3

003.mp3

1 Press [PLAY MODE] to select the desired mode.

MPEG Layer-3 audio decoding technology licensed from Fraunhofer

IIS and Thomson multimedia.

Every time you press the button:

ALL-DISC → 1-SONG → 1-ALBUM

Windows Media, and the Windows

logo are trademarks, or registered

trademarks of Microsoft Corporation in

the United States and/or other coun-

tries.

1-DISC←

ALL-DISC: Plays all loaded discs in succession from the

selected disc to the final disc

Plays one selected track on the selected disc.

1-ALBUM: Plays one selected album on the selected disc.

1-DISC: Plays one selected disc.

1-SONG:

WMA is a compression format deve-

loped by Microsoft Corporation. It

achieves the same sound quality as

MP3 with a file size that is smaller

than that of MP3.

(The original display is restored in about 2 seconds.)

2 Press [DISC] and (within 10 seconds) [1]–[5] to select the

disc.

The CD starts.

Note

When you selected “1-ALBUM” or “1-SONG” in step 1

• When creating a WMA disc, ensure the copyright feature is off.

• Noise may occur when playing WMA files.

Press [ALBUM ( or

)] to select the album.

Play starts from the first track of the selected album.

Limitations on MP3/WMA play

When you selected “1-SONG” in step 1

Press the numbered buttons to select the track in the

current album.

This unit is not compatible with packet-write format.

When both MP3/WMA and CD-DA data is recorded on the disc over

a number of sessions:

•

If the first session contains MP3/WMA recordings, the unit will play

from the MP3/WMA made in that session till the session before the

first CD-DA recordings.

•

To select track 10 or over, press [X10] once then the two digits.

To select track 100 or over, press [

10] twice then the three digits.

Play starts from the selected track.

If the first session contains CD-DA recordings, the unit will play only

the recordings made in that session. The subsequent sessions will

be ignored.

•

To stop play

Press [L, CLEAR].

You cannot use 1-Disc Random play, All-Disc Random play and

search function.

•

Some MP3/WMA may not be played due to the condition of the disc

or recording.

Recordings will not necessarily be played in the order you recorded

them.

When playback ends

The current play mode will be retained in memory until it is changed

even if the unit is turned off.

•

Final disc

For example, if play starts from disc 4, disc 3 will be the “final disc”.

Order of progression: Disc 4z5z1z2z3

L Display when in the stop mode (example)

File format indicator

“MP3”: Indicates the disc contains MP3 files

“WMA”: Indicates the disc contains WMA files

If the disc contains both MP3 and WMA files, both “MP3” and “WMA”

L When “NOT MP3/ERROR1” or “NOT MP3/ERROR2” appears

on the display

An unsupported MP3 format is being played. The unit will skip that

track and play the next one.

will light up.

Total number of tracks

(on the current disc)

L When “TRACK/PROTECTED” appears on the display

A copyright protected WMA format is being played. The unit will skip

that track and play the next one.

Total number of albums

(on the current disc)

File format indicator

Note

You can use repeat mode (A page 9) with CD Play Mode function.

You cannot use program mode together with CD Play Mode function.

•

RQT6707

Download from Www.Somanuals.com. All Manuals Search And Download.

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

PLAY MODE

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

SPACE

REPEAT

ABC

DEF

DISC

DEL

GHI

JKL

MNO

PROGRAM

PQRS

TUV

PLAY MODE

Joystick

ALBUM (

SPACE

REPEAT

TUNER

BAND

TAPE

DEL

CLEAR

AUX

TUNER

BAND

TAPE

CLEAR

AUX

VOL

CURSOR

ALBUM

REW

VOL

ALBUM

CURSOR

REW

)

TITLE

INTRO

MARKER

S.WOOFER

ENTER

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Album skip play

Program play for MP3/WMA

You can program up to 24 tracks.

During play or stop

Push the joystick up/down ([ALBUM /CHARA] or

[ALBUM /CHARA]) to select the desired album.

Remote control only

Preparation:

1. Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.

Remote control: Press [ALBUM (

)].

2. Press [L, CLEAR].

When selecting in the stop mode:

Casse

1 Press [PROGRAM].

“PGM” appears.

2 Press [ALBUM (

)] to select the album.

Number of tracks

in current album

Current album

To select an album directly, press the numbered buttons

after pressing [ALBUM (

)].

Press [:/J, CD] to start play.

To select album 10 or over, press [X10] once then the two digits.

Play starts from the first track of the selected album.

To play from another track, refer to “Track skip play” below.

To select album 100 or over, press [X10] twice then the three

digits.

3 Press [g, REW/3] or [f, 4/FF] to select the track.

Track skip play

To select a track directly, press the numbered buttons after

pressing [g, REW/3] or [f, 4/FF].

During play or stop

Push the joystick left/right ([g, CURSOR]

[f,

To select track 10 or over, press [X10] once then the two digits.

CURSOR]) to select a desired track. (You can also press

[g/REW/3] or [f/FF/4].)

Remote control: Press [g, REW/3] or [f, 4/FF].

To select track 100 or over, press [

10] twice then the three digits.

4 Press [ENTER].

Repeat steps 2~4 to program other tracks.

When selecting in the stop mode:

5 Press [:/J, CD] to start play.

To exit program mode

Reco

Press [PROGRAM] in the stop mode. (You can replay your program

by pressing [PROGRAM] then [:/J, CD].)

Current album

Press [:/J, CD] to start play.

Play starts from the selected track.

Current track

You can do the following while “P” is displayed

To play from another album, refer to “Album skip play” above.

Note

During 1-ALBUM mode, track skipping can only be done within the

current album.

To check program contents

Press [g, REW/3] or [f, 4/FF].

•

Every time you press the button, the album number, track number

and program order are displayed.

To add to the program

Do steps 2~4.

To clear the last track

INTRO function (Album scan)

•

You can find an album by listening to the first track of all albums in the

current disc for 10 seconds each.

•

Remote control only

Press [DEL].

To clear all tracks

Press [L, CLEAR].

Preparation: Press [:/J, CD] and then [L, CLEAR].

•

1 Press [INTRO].

“CLEAR ALL?” is displayed.

Within 5 seconds, press the button again to clear all tracks.

INTRO function starts.

(INTRO function is cancelled after playing the first track in the

last album on the current disc.)

Note

You can use repeat mode (A page 9) with program play.

You cannot program more than one CD for MP3/WMA.

You cannot program CD-DA together with MP3/WMA tracks.

The program memory is cleared when you change a disc or open

•

2 While your desired album is playing, press [:/J, CD].

•

Play continues from the first track of the album.

•

RQT6707

To stop during the process, press [INTRO] or [L, CLEAR].

the CD tray.

Download from Www.Somanuals.com. All Manuals Search And Download.

WMA: SC-AK610 and SC-AK510 only

Entering characters

How discs with MP3/WMA differ from CDs

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

IMMER

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

You can enter keyword of up to 10 characters for album/track title

search. You can only enter upper case letters but the unit also searches

for lower case.

PLAY MODE

SPACE

REPEAT

DEL

Joystick

TUNER

BAND

TAPE

CLEAR

AUX

, CLEAR

On the main unit

VOL

ALBUM

CURSOR

REW

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Starting play from a desired track in a

desired album

Remote control only

DELETE

Preparation: Press [:/J, CD] and then [L, CLEAR].

1 Press [ALBUM (

)] and then the numbered

1 Push the joystick up/down ([ALBUM

/CHARA] or

buttons to select the album.

[ALBUM /CHARA]) to select the required character.

To select album 10 or over, press [

To select album 100 or over, press [

Play starts from the first track of the selected album.

10] once then the two digits.

Each time you push the joystick up ([ALBUM

characters change in the following order.

/CHARA]), the

X10] twice then the three digits.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

1 2 3 4 5 6 7 8 9 0

2 Press the numbered buttons to select the track in the

current album.

space ! ” # $ % & ’ ( ) ∗ + , – . / : ; < = > ? _

The sequence is reversed if you push the joystick down

([ALBUM /CHARA]).

If you hold the joystick up/down ([ALBUM

[ALBUM /CHARA]), the characters change faster.

To select track 10 or over, press [

To select track 100 or over, press [

10] once then the two digits.

10] twice then the three digits.

Play starts from the selected track.

/CHARA] or

Title search function

You can search for your desired album/track with its keyword (part of

the title).

2 Push the joystick right ([f, CURSOR])

ter.

to enter the charac-

Album title search

Repeat steps 1~2to complete the keyword.

Preparation: Press [:/J, CD] and then [L, STOP].

On the remote control

1 Press [TITLE SEARCH]

once.

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

2 Enter the characters of the keyword for the album

ABC

DEF

DISC

Blinks to indicate album title search mode

title. (A see right)

GHI

JKL

MNO

PROGRAM

3 Press [ENTER].

PQRS

TUV

WXYZ

PLAY MODE

Album title search starts.

SPACE

REPEAT

The matched album title is displayed.

DEL

To show the next album title search result, push the joystick right

([f, CURSOR]). (Remote control: Press [f, 4/FF].)

When there is no match for the searched keyword, the display

shows “NOT FOUND”.

TUNER

BAND

TAPE

CLEAR

AUX

VOL

CURSOR

ALBUM

REW

Press [:/J, CD] to start play from the album found.

TITLE

CURSOR (

)

INTRO

MARKER

S.WOOFER

ENTER

Play starts from the first track of the album.

(Title search mode is cancelled.)

SHIFT S.SOUND EQ PRESET EQ MUTING

1 Press the numbered button to select the required character.

rack title search

Characters allocated to the numbered buttons:

Preparation: Press [:/J, CD] and then [L, STOP].

Numbered Characters

buttons

Numbered Characters

buttons

1 Press [TITLE SEARCH]

twice.

M N O 6

P Q R S 7

T U V 8

W X Y Z 9

2 Enter the characters of the keyword for the track title.

A B C 2

D E F 3

G H I 4

J K L 5

Blinks to indicate track title search mode

(A see right)

3 Press [ENTER].

Track title search starts.

The matched track title is displayed.

space !”#$ %&’()∗+,– ./:;<= > ?_ `

The characters change each time a numbered button is pressed.

For example, every time you press [2]:

A→ B→ C→ 2

To show the next track title search result, push the joystick right

([f, CURSOR]). (Remote control: Press [f, 4/FF].)

When there is no match for the searched keyword, the display

shows “NOT FOUND”.

Press [:/J, CD] to start play from the track found.

(Title search mode is cancelled.)

2 Press [CURSOR

] to enter the character.

Repeat steps 1~2 to complete the keyword.

To cancel partway through

Press [L, STOP].

RQT6707

Download from Www.Somanuals.com. All Manuals Search And Download.

CLOCK

PLAY/

REC

AUTO OFF TIMER

For your reference

SLEEP

CD DISP

DIMMER

If you entered a character by mistake, push the joystick left ([g,

CD DISP

ABC

DEF

DISC

CURSOR]) (remote control: press [

CURSOR]) to move back to

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

the mistake, then enter the correct character.

PLAY MODE

Editing keywords

SPACE

REPEAT

DEL

To move the cursor

On the main unit: Push the joystick left/right ([g CURSOR] or

TUNER

BAND

TAPE

CLEAR

AUX

[f CURSOR]).

On the remote control: Press [CURSOR (

)].

VOL

CURSOR

ALBUM

REW

Deleting a character

1. Move the cursor over the character to be deleted.

2. Press [DELETE] (remote control: [DEL]).

TITLE

INTRO

MARKER

ENTER

CD display for MP3/WMA

Remote control only

During play or pause

Press [CD DISP] to select a desired CD display mode.

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

Every time you press the button:

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

→

a Remaining play time, Original spectrum analyzer display mode

b Elapsed play time, Album title

PLAY MODE

SPACE

REPEAT

DEL

2_MARKER,

–MEMORY,

-RECALL

Casse

TUNER

BAND

TAPE

CLEAR

AUX

c Elapsed play time, Track title

VOL

ALBUM

CURSOR

REW

TITLE

INTRO

MARKER

S.WOOFER

ENTER

d Elapsed play time, ID3 album name (MP3 only)

e Elapsed play time, ID3 title name (MP3 only)

f Elapsed play time, ID3 artist name (MP3 only)

g Elapsed play time, Original spectrum analyzer display mode

SHIFT S.SOUND EQ PRESET EQ MUTING

Marking a track

You can mark one track each on the discs loaded so that you can

start play from them later.

Example:

Elapsed play time

To mark a track number

During play or stop

Select your desired track.

(For MP3/WMA, refer to “Track skip play” on page 11.

For CD-DA, press the numbered buttons.

To select track 10 or over, press [X10] then the two digits.)

Reco

Track title

2 Hold down [MARKER, –MEMORY] until “STORING”

blinks on the display.

Note

Remote control: Hold down [MARKER].

When a title is longer than 10 characters, it will scroll across the

display. If you selected a mode from b - f (see above), the

scrolling will start again after every 3 seconds.

“NO ID3” is displayed if titles with ID3 tags haven’t been entered.

(MP3 only)

•

The selected track is stored in the marker of the current disc.

Note

•

If a track is already stored in the marker, it will be replaced next time

you store a new track in the same marker.

Maximum number of displayable characters:

Album/track title: 31

To recall a marked track number in the current disc

ID3 album/title/artist name: 30

(ID3 is a tag embedded in MP3 track to provide information about

the track.)

During play or stop

This unit can display album and track titles with ID3 tags (version

1.0 and 1.1). Titles containing text data that the unit doesn’t support

cannot be displayed.

Press [MARKER, -RECALL] to recall a marker.

Remote control: Press [MARKER].

Play starts from the track recalled.

•

Note

“NO MARKER” indicates that the marker in the current disc is empty.

The marker memory is cleared when you open the CD tray.

For CD-DA, you cannot use this function during 1-Disc Random

play and All-Disc Random play.

•

You cannot use this function during program mode.

•

RQT6707

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassettes

Sound quality/sound field

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

IMMER

Enhancing the sound quality

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

You can enhance the bass and treble effect of the sound.

PQRS

TUV

PLAY MODE

SPACE

REPEAT

Press [SUPER SOUND EQ].

Remote control: Press [S.SOUND EQ].

The button light comes on.

DEL

TUNER

BAND

TAPE

CLEAR

AUX

Press the button again to cancel.

The button light goes out.

VOL

ALBUM

CURSOR

REW

DECK 1/2

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Adjusting the bass (SC-AK610 and

SC-AK510 only)

You can use either deck 1 or deck 2 for tape playback.

SC-AK610

: Press [SUBWOOFER].

Use normal position tapes.

High position and metal position tapes can be played, but the unit will

not be able to do full justice to the characteristics of these tapes.

: Press [SUPER WOOFER].

SC-AK510

Remote control: Press [SHIFT] + [S.WOOFER].

The button light comes on.

1 Press [:, TAPE].

Each time you press the button:

MID (medium) → MAX (high) → Light off (off)

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c, DECK 1] or [c, DECK 2] and insert the

cassette.

To cancel

Front side

Insert with the side to be played

Press [SUBWOOFER] (SC-AK510: [SUPER WOOFER]) to turn the

light off.

Remote control: Press [SHIFT] + [S.WOOFER].

facing towards you and the

exposed tape facing down.

Close the holder by hand.

Note

3 Press [:, TAPE] to start playback.

To play on the other side of the tape, turn the tape over and press

[:, TAPE].

You cannot use this function when headphones are connected.

To stop tape playback

Press [L, STOP].

Recording

CLOCK

PLAY/

REC

To fast-forward or rewind

Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward).

AUTO OFF TIMER

SLEEP

IMMER

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

PLAY MODE

SPACE

REPEAT

DEL

Note

TUNER

BAND

TAPE

CLEAR

AUX

Tape playback is momentarily interrupted if you open the other deck.

•

VOL

Tapes exceeding 100 minutes are thin and can break or get caught

ALBUM

CURSOR

REW

•

, DECK 1

, TAPE

ALBUM (

)

TITLE

in the mechanism.

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Tape slack can get caught up in the mechanism and should be

•

taken up before the tape is played.

Endless tapes can get caught up in the deck’s moving parts if used

•

incorrectly.

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Sound quality/sound field

DEL

Preparation:

TUNER

BAND

TAPE

CLEAR

AUX

Wind up the leader tape so recording can begin immediately.

VOL

CURSOR

ALBUM

REW

1 Press [c, DECK 2] and insert the cassette to be

recorded.

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

PRESET EQ

2 Select the source to be recorded.

S.WOOFER (

and

S.SOUND EQ

only)

Radio recording:

Tune in the station. (A page 7)

CD recording:

SHIFT

1 Insert the CD(s) you want to record.

Press [:/J, CD] and then [L, STOP].

2 Prepare the desired CD recording mode.

Remote control only

Using the built-in sound quality/sound

field settings

To record programmed tracks (A do steps 1–3 on page 9

for CD-DA or steps 1–4 on page 11 for MP3/WMA).

•

Press [PRESET EQ] to select a setting.

Every time you press the button:

To record specific CDs/tracks

•

1. For CD-DA, do steps 1 to 2 on page 9: “To listen to

specific CDs and tracks (CD Play Mode function)”.

For MP3/WMA, do steps 1 to 2 on page 10: “CD Play

Mode function for MP3/WMA”.

HEAVY

SOFT

CLEAR

DISCO

LIVE

HALL

EQ-OFF

(cancelled)

Ensure CD is stopped.

2. For 1-ALBUM mode (MP3/WMA only) and 1-SONG

HEAVY (sound quality) : Adds punch to rock

SOFT (sound quality) : For background music

mode: Press [ALBUM (

)] to select the album.

CLEAR (sound quality): Clarifies higher sounds

3. For 1-SONG mode: Press [g, REW/3] or [f,

4/FF] to select the track.

(WMA: SC-AK610 and SC-AK510 only)

DISCO (sound field)

: Produces sound with the same kind of

lengthy reverberations heard at a disco

: Makes vocals more alive

: Adds an expansiveness to the sound to

produce the atmosphere of a great concert

hall.

LIVE (sound field)

HALL (sound field)

Tape-to-tape recording:

1 Press [:, TAPE] and then [L, STOP].

2 Press [c, DECK 1] and insert the cassette you want to record.

Note

RQT6707

3 Press [a REC] to start recording.

You cannot use PRESET EQ and SUPER SOUND EQ together.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Optional antenna connections

To stop recording

Press [L, STOP].

AM outdoor antenna

AM outdoor antenna (not included)

If the tape finishes before the CD

The CD continues playing. Press [L, STOP] to stop it.

5 -12m

16 – 40ft.)

(

To record on the other side of the tape

Turn the tape over and press [a REC].

AM loop

antenna

(included)

Reducing noise when recording AM

Remote control only

Hold down [PLAY MODE] while recording.

Every time you hold down the button: BP1 ↔ BP2

Choose the setting with the least noise.

Run a piece of vinyl wire horizontally across a window or other

convenient location.

Note

Leave the loop antenna connected.

Changes to volume and sound/field quality do not affect recording.

You cannot open deck 1 while recording.

You cannot fast-forward or rewind one deck while recording with

the other.

When recording an AM broadcast, sound is momentarily interrupted

when you start and stop the recording.

•

Note

•

Disconnect the outdoor antenna when the unit is not in use.

Do not use the outdoor antenna during an electrical storm.

•

External unit connections

Erasure prevention

Use a screwdriver or similar object to break out the tab.

Rear panel of

this unit

Side A

(R)

(L)

Analog player

(not included)

Tab for side B

Tab for side A

An analog player with a built-in phono equalizer can be connected.

For details, refer to the instruction manual of the units which are to

be connected.

When units other than those described above are to be connected,

please consult your audio dealer.

To re-record on a protected cassette

•

Cover the hole with adhesive tape.

•

Using an external unit

Adhesive tape

To erase a tape

1. Press [:, TAPE] and then [L, STOP].

2. Insert the recorded tape into deck 2.

Ensure there is no tape in deck 1.

3. Press [a REC].

REC

AUX

Optional antenna connections

(See above for external unit connection.)

1. Press [AUX].

Use outdoor antenna if radio reception is poor.

The unit comes on.

2. For listening: Proceed to step 3.

For recording: Press [a REC] (recording starts).

3. Start playback from the external source. (For details, refer to the

external unit’s instruction manual.)

FM outdoor antenna

(not included)

Using headphones (not included)

75 Ω coaxial cable (not included)

30mm

”

)

(1³/

Shield braid

15mm

”

)

Core wire

(

PHONES

Reduce the volume level and connect the headphones.

Plug type: 3.5mm (¹/8˝) stereo

Disconnect the FM indoor antenna.

The antenna should be installed by a competent technician.

•

Note

•

RQT6707

Avoid listening for prolonged periods of time to prevent hearing damage.

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning the demo function off

Auto-off function

Remote control only

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

AUTO OFF

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

PLAY MODE

SPACE

REPEAT

DEL

TUNER

BAND

TAPE

CLEAR

AUX

VOL

CURSOR

ALBUM

REW

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

A demonstration of the display is shown if you have not set the clock.

You can reduce the power consumed in standby mode by turning it off.

SHIFT

When CD or tape is selected as the source

To save power, the unit turns off if it is left unused for ten minutes.

This function does not work if the source is tuner or AUX.

Hold down [-DISP/–DEMO] until “NO DEMO” is displayed.

Every time you hold down the button:

NO DEMO (off) ↔ DEMO ON (on)

Press [SHIFT] + [AUTO OFF].

“AUTO OFF” is shown on the display.

To show a demonstration of the display

Hold down [-DISP/–DEMO] until “DEMO ON” is displayed.

The setting is maintained even if the unit is turned off.

If you select tuner or AUX as the source, “AUTO OFF” goes out. It

comes on again when you select CD or tape.

Note

DEMO function cannot be turned on when Dimmer is on.

To cancel

Press [SHIFT] + [AUTO OFF] again.

Convenient functions

Setting the time

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

MMER

Remote control only

ABC

DEF

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

CLOCK

PLAY/

REC

PLAY MODE

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

SPACE

REPEAT

DEL

ABC

DEF

DISC

GHI

JKL

MNO

TUNER

BAND

TAPE

PROGRAM

CLEAR

AUX

PQRS

TUV

WXYZ

PLAY MODE

VOL

ALBUM

CURSOR

REW

SPACE

REPEAT

TITLE

INTRO

MARKER

S.WOOFER

ENTER

DEL

SHIFT S.SOUND EQ PRESET EQ MUTING

TUNER

BAND

TAPE

CLEAR

AUX

VOL

CURSOR

ALBUM

REW

To dim the display panel

Remote control only

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

Press [DIMMER].

The display is dimmed and the indicators are turned off.

(The AC supply indicator remains on.)

Press [DIMMER] again to restore the display.

This is a 12-hour clock.

1 Switch on the power.

2 Press [SHIFT] + [CLOCK/TIMER] to select “CLOCK”.

Switching displays

Every time you press the button:

Press [-DISP/–DEMO] to select the desired spectrum

analyzer.

Every time you press the button:

CLOCK

PLAY

REC

Previous display

Normal

Peak hold

Aurora

Reflection

Animation 1

(within 7 seconds or so)

Press [g, REW/3] or [f, 4/FF] to set the time.

Animation 2

("Race")

(OFF)

("Drive")

4 Press [SHIFT] + [CLOCK/TIMER] to finish setting the

time.

The display will return to whatever was displayed before you set

To mute the volume

Remote control only

the time.

Press [MUTING].

To display the time

Press the button again to cancel.

“MUTING” goes out.

Press [SHIFT] + [CLOCK/TIMER] once when the unit is on or at

standby mode.

To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise

it to the required level.

The time is shown for about 5 seconds.

Note

Muting is also cancelled when the unit is turned off.

RQT6707

Reset the clock regularly to maintain accuracy.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the timers

CLOCK

PLAY/

REC

AUTO OFF TIMER

SLEEP

CD DISP

DIMMER

To cancel the timer

ABC

DEF

Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the

display.

(The timer comes on at the set time everyday if the timer is on.)

DISC

GHI

JKL

MNO

PROGRAM

PQRS

TUV

WXYZ

PLAY MODE

SPACE

REPEAT

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2, 3 and 5.

To change the source or volume

1. Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the

display.

DEL

TUNER

BAND

TAPE

CLEAR

AUX

VOL

CURSOR

ALBUM

REW

2. Make changes to the source or volume.

3. Do steps 4 to 5.

TITLE

INTRO

MARKER

S.WOOFER

ENTER

SHIFT S.SOUND EQ PRESET EQ MUTING

To change the timer

Press [SHIFT] + [rPLAY/REC] to select the desired timer.

Every time the button is pressed:

PLAY

REC

(off)

Using the play/record timer

To check the settings

Remote control only

Press [SHIFT] + [CLOCK/TIMER] while the unit is on to select “rPLAY”

or “rREC”.

You can set the timer to come on at a certain time to wake you up

(play timer) or to record a radio station or from the aux source (record

timer).

The settings are shown in the following order:

Play timer: start time→finish time→source→volume

Record timer: start time→finish time→source

To check the settings while the unit is off, press [SHIFT] + [CLOCK/

TIMER] twice.

The play and record timers cannot be used together.

Preparations:

Turn the unit on and set the clock (A page 16).

For the play timer, prepare the desired music source (tape/CD/

radio/aux), and set the volume.

•

If you use the unit after the timers are set

After using, check that the correct tape/CD are loaded before turning

the unit off.

For the record timer, check the cassette’s erasure prevention tabs

(A page 15) and insert the tape in deck 2 (A page 14). Tune to

•

the radio station (A page 7) or select the aux source (A page 15).

Note

If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

If you selected AUX as the source, when the timer comes on, the

unit turns on and engages “AUX” as the source. If you want to

playback or record from a connected unit, set that unit’s timer to the

same time. (See the connected unit’s instruction manual.)

1 Press [SHIFT] + [CLOCK/TIMER] to select the timer

•

function.

Every time you press the button:

•

CLOCK

PLAY

REC

Previous display

rPLAY: to set the play timer

rREC: to set the record timer

Using the sleep timer

Remote control only

2 ON time setting

1 (Within 8 seconds or so)

Press [g, REW/3] or [f, 4/FF] to set the

start time.

This timer turns the unit off after a set time.

2 Press [SHIFT] + [CLOCK/TIMER].

While enjoying the desired source:

Press [SLEEP] to select the time (minutes).

3 OFF time setting

Every time you press the button:

1 Press [g, REW/3] or [f, 4/FF] to set the

finish time.

SLEEP 30

SLEEP 60

SLEEP 90

SLEEP 120

SLEEP OFF

2 Press [SHIFT] + [CLOCK/TIMER].

The start and finish times are now set.

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

4 Press [SHIFT] + [rPLAY/REC] to display the timer

indicator.

Every time you press the button:

To confirm the remaining time

Press [SLEEP] once.

The remaining time is shown for about 5 seconds.

PLAY

REC

(off)

To change the setting

Press [SLEEP] to select the new setting.

rPLAY: to turn the play timer on

rREC: to turn the record timer on

(The indicator doesn’t appear if the start and finish times or the

clock hasn’t been set.)

You can use the sleep timer in combination with the play/record timer.

Make sure the unit is off before the play/record timer’s start time.

5 Press [f] to turn the unit off.

Note

The unit must be off for the timers to operate.

The sleep timer will be turned off when you start recording from a CD.

Play timer:

Play will start in the set condition at the set time

with volume increasing gradually to the set level.

•

Record timer: The unit comes on 30 seconds before the set

•

RQT6707

time with the volume muted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the

chart do not solve the problem:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or web site

(http://www.panasonic.com).

In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic.ca), or an authorized

Servicentre closest to you.

Reference pages are shown as black circled numbers 5.

Common Problems

Turn the volume up.

No sound.

Switch off the unit, determine and correct the cause, then switch the unit on. Causes include shorting of

the positive and negative speaker wires, straining of the speakers through excessive volume or power,

and using the unit in a hot environment.

Sound stops.

Check the speaker connections. 5

Sound is unfixed, reversed or

comes from one speaker

only.

An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords away

from this unit’s cables.

Humming heard during play.

“ERROR” is displayed.

Incorrect operation performed. Read the instructions and try again.

You plugged the AC power supply cord in for the first time or there was a power failure recently. Set the

time. ^

“– –:– –” appears on the

display at standby mode.

“F61” is displayed.

Check and correct the speaker cords connection. 5

If this does not fix the problem, there is a power supply problem. Consult the dealer.

Listening to the radio

Noise is heard.

The stereo indicator flickers

or doesn’t light.

Use an outdoor antenna. %

Sound is distorted.

A beat sound is heard.

Turn the TV off or separate it from the unit.

A low hum is heard during

AM broadcasts.

Separate the antenna from other cables and cords.

When there is a television set nearby

The picture on the TV

disappears or stripes

appear on the screen.

The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to

an outdoor antenna.

The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.

Using the cassette deck

Poor quality sound.

Clean the heads. See below

Recording is not possible.

If the erasure prevention tabs have been removed, cover the holes with adhesive tape. %

Playing discs

The disc may be upside down. 8

Wipe the disc.

The display is wrong or

play won’t start.

Replace the disc if it is scratched, warped, or non-standard.

Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an

hour for it to clear and try again.

The total number of tracks

displayed differs each time

the same disc is inserted.

Unusual sound is heard.

The disc may be scratched, or its data may be defective. Replace the disc.

CD-RW cannot be read.

The disc was incompletely formatted. Use the recording equipment to fully format the disc before recording.

The unit cannot display the remaining play time for variable bit rate (VBR) tracks.

“VBR–” is displayed

instead of the remaining

play time.

There is a problem with the disc mechanism. (A power failure may have occurred.)

The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the tray,

close it. The unit will make the disc changing noises for a few moments and then it should operate normally.

“TAKE OUT/DISC” appears

on the display.

Remote control

Check that the batteries are inserted correctly. 4

Replace the batteries if they are worn.

Remote control doesn’t

work.

Maintenance

For a cleaner, crisper sound

If the surfaces are dirty

To clean this unit, wipe with a soft, damp cloth.

Clean the heads regularly to assure good quality playback and

recording.

Use a cleaning tape (not included).

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using a chemically treated cloth, read the instructions that

came with the cloth carefully.

RQT6707

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Output sound pressure level

83dB/W (1.0m)

120 Hz, 5 kHz

SC-AK610

AMPLIFIER SECTION

Power output

FM TUNER SECTION

Frequency range

Cross over frequency

Frequency range

THD 10%, both channels driven

55Hz–120Hz

87.9–107.9MHz (200kHz steps)

31Hz–25kHz (–16dB)

43Hz–24kHz (–10dB)

87.5–108.0MHz (100kHz steps)

(Low channel) 65W per channel (12Ω)

Sensitivity

2.5ØV (IHF)

Dimensions (WxHxD) 237 x 376 x 293mm

120Hz–4kHz

S/N 26dB

2.2ØV

(9¹¹/₃₂˝ x 14¹³/₁₆˝ x 11¹⁷/₃₂˝)

(Mid channel) 30W per channel (6Ω)

4kHz–16kHz

(High channel) 30W per channel (6Ω)

Antenna terminal(s)

75Ω (unbalanced)

Mass

4.3kg (9.5 lb.)

AM TUNER SECTION

Frequency range

Front speakers SB-AK410

40Hz–100Hz

Type

3 way, 3 speaker system

(Subwoofer channel)

Total power

120W (6Ω)

520–1710kHz (10kHz steps)

Speaker(s)

Woofer

370W

16cm (6¹/₂˝) cone type

6cm (2³/₈˝) cone type

2.5 cm (1˝) Piezo type

Sensitivity

Power output

S/N 20dB (at 1000kHz)

560ØV/m

Tweeter

Super tweeter

Impedance

HIGH

THD 10%, both channels driven

100Hz

CASSETTE DECK SECTION

(Low channel) 75W per channel (12Ω)

Track system

Heads

4 track, 2 channel

6Ω

1kHz

LOW

6Ω

(Mid channel) 40W per channel (6Ω)

Record/playback Solid permalloy head

Input power

HIGH

10kHz

Erasure

Motor

Double gap ferrite head

DC servo motor

150 W (Music)

(High channel) 40W per channel (6Ω)

LOW

80Hz

Recording system

Erasing system

Tape speed

Overall frequency response

(+3 dB, –6 dB at DECK OUT)

NORMAL (TYPE I)

AC bias 100 kHz

AC erase 100 kHz

4.8 cm/s (1⁷/₈ips)

Output sound pressure level

(Subwoofer channel)

Total power

Input sensitivity

AUX

150W (6Ω)

86.5dB/W (1.0m)

3.5 kHz, 10 kHz

35Hz–25kHz (–16dB)

47Hz–24kHz (–10dB)

460W

Cross over frequency

Frequency range

250mV

Input Impedance

AUX

35 Hz–14 kHz

Dimensions (WxHxD) 227 x 344 x 250mm

13.3kΩ

SC-AK510

S/N

50 dB (A weighted)

0.18% (WRMS)

(8¹⁵/₁₆˝ x 13¹⁷/₃₂˝ x 9²⁷/₃₂˝)

Wow and flutter

AMPLIFIER SECTION

Power output

Mass

3.4kg (7.5 lb.)

Fast forward and rewind time

Approx. 120 seconds with

THD 10%, both channels driven

55Hz–120Hz

Subwoofer SB-WAK610 (SC-AK610 only)

C-60 cassette tape

Type

1 way, 2 speaker system

(Low channel) 50W per channel (6Ω)

CD SECTION

Sampling frequency

Decoding

Speaker(s)

Subwoofer

Impedance

Input power

16cm (6¹/₂˝) cone type

6Ω

120Hz–4kHz

44.1kHz

16 bit linear

(Mid channel) 50W per channel (6Ω)

4kHz–16kHz

(High channel) 50W per channel (6Ω)

Total Tri-Amp power 150 W per channel

Power output

Beam source/wavelength

300W (Music)

Semiconductor laser/780nm

Output sound pressure level

Number of channels

Frequency response

Stereo

82dB/W (1.0 m)

Frequency range 22Hz–6.8kHz (–16dB)

58Hz–4kHz (–10dB)

THD 10%, both channels driven

100Hz

20Hz–20kHz (+1, –2dB)

Below measurable limit

8fs

Wow and flutter

Digital filter

D/A converter

Dimensions (WxHxD) 230 x 372 x 329 mm

(9¹/₁₆˝ x 14²¹/₃₂˝ x 12¹⁵/₁₆˝)

(Low channel) 60W per channel (6Ω)

1kHz

MASH (1 bit DAC)

Mass

5.4kg (11.9 lb.)

AC 120V, 60 Hz

(Mid channel) 60W per channel (6Ω)

10kHz

MP3

Bit rate

Sampling frequency

GENERAL

Power supply

32kbps–320kbps

(High channel) 60W per channel (6Ω)

Total Tri-Amp power 180 W per channel

Input sensitivity

Power consumption

: 244 W

: 262 W

: 225W

SC-AK610

SC-AK510

SC-AK403

32kHz, 44.1kHz, 48kHz

WMA (SC-AK610 and SC-AK510 only)

AUX

Input Impedance

AUX

250mV

Sampling frequency

SC-AK410

32kHz, 44.1kHz, 48kHz

Dimensions (WxHxD) 250 x 330 x 370mm

13.3kΩ

SC-AK410

(9²⁷/₃₂˝ x 13˝ x 14³/₈˝)

SPEAKER SECTION

Front speakers SB-AK610

AMPLIFIER SECTION

Power output

Mass

SA-AK610 SA-AK510

: 8.2kg (18.0 lb.)

: 7.8 kg (17.2 lb.)

THD 10%, both channels driven

Type

3 way, 3 speaker system

60Hz–3kHz

Speaker(s)

Super woofer

Woofer

Tweeter

Impedance

HIGH

SA-AK410 SA-AK403

16cm (6¹/₂˝) cone type

12cm (4³/₄˝) cone type

6cm (2³/₈˝) cone type

(Low channel) 58W per channel (6Ω)

3kHz–16kHz

Power consumption in standby mode: 0.34 W

(High channel) 58W per channel (6Ω)

Total Bi-Amp power 116 W per channel

Power output

Note:

6Ω

1. Specifications are subject to change

without notice.

THD 10%, both channels driven

1kHz

MID

LOW

12Ω

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by

the digital spectrum analyzer.

(Low channel) 75W per channel (6Ω)

Input power

HIGH

MID

LOW

10kHz

130 W (Music)

150 W (Music)

(High channel) 75W per channel (6Ω)

Total Bi-Amp power 150 W per channel

Input sensitivity

3. SB-AK610 SB-AK510

The labels “HIGH”, “MID” and “LOW” on

the rear of the front speakers refer to

High frequency, Mid frequency and Low

frequency.

Output sound pressure level

AUX

Input Impedance

AUX

250mV

83dB/W (1.0m)

120 Hz, 5 kHz

Cross over frequency

Frequency range

13.3kΩ

35Hz–25kHz (–16dB)

45Hz–24kHz (–10dB)

AMPLIFIER SECTION

Power output

SB-AK410

SC-AK403

Dimensions (WxHxD) 237 x 376 x 293mm

The labels “HIGH” and “LOW” on the rear

of the speakers refer to High frequency

and Low frequency.

(9¹¹/₃₂˝ x 14¹³/₁₆˝ x 11¹⁷/₃₂˝)

THD 10%, both channels driven

Mass

4.3kg (9.5lb.)

60Hz–3kHz

(Low channel) 50W per channel (6Ω)

Front speakers SB-AK510

3kHz–16kHz

Type

3 way, 3 speaker system

(High channel) 50W per channel (6Ω)

Total Bi-Amp power 100 W per channel

Power output

Speaker(s)

Super woofer

Woofer

Tweeter

Impedance

HIGH

16cm (6¹/₂˝) cone type

12cm (4³/₄˝) cone type

6cm (2³/₈˝) cone type

THD 10%, both channels driven

1kHz

(Low channel) 65W per channel (6Ω)

6Ω

10kHz

MID

(High channel) 65W per channel (6Ω)

Total Bi-Amp power 130 W per channel

Input sensitivity

LOW

Input power

HIGH

MID

LOW

130 W (Music)

AUX

Input Impedance

AUX

250mV

RQT6707

13.3kΩ

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty (ONLY FOR U.S.A.)

Customer Services Directory (ONLY FOR U.S.A.)

Panasonic Consumer Electronics

Company, Division of Matsushita

Electric Corporation of America

One Panasonic Way Secaucus,

New Jersey 07094

Panasonic Sales Company,

Division of Matsushita Electric of

Puerto Rico, Inc. (“PSC”)

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3

www.panasonic.ca

http://www.panasonic.com

Printed in Singapore

RQT6707-3P

RQT6351

G1002TL3013

Download from Www.Somanuals.com. All Manuals Search And Download.

Nady Systems Microphone ENCORE1 User Manual
Nortel Networks Cordless Telephone M3901 User Manual
North Star Portable Generator 5500 BDG User Manual
Olympus Camera Lens VH301501 User Manual
Optimus Cassette Player SCP 87 User Manual
Oregon Scientific Fitness Electronics PE823 User Manual
Oster Griddle CKSTGRRD25 User Manual
OWI Portable Speaker TRP470 User Manual
Panasonic DVD Recorder DMR BS750 User Manual
Panasonic Headphones RP HC101 User Manual