R
Heavy Duty Cassette/Weather Band Receiver
with CD Changer Control / XM Radio Ready
CQ-4330U
APM
BAND
DISP
MODE
CLK
ALM
PWR
Operating Instructions
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
REP
RPT
SKP
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
5
6
• Please read these instructions carefully before using this product and keep this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will
bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering,
manufactured with carefully selected components and assembled by people who take pride in their work. Once you
discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of
our family.
❐ Use this product safely
When Driving
Keep the volume level low enough to be aware of
road and traffic conditions.
Use the Proper Power Supply
This product is designed to operate with a 12 V DC,
negative ground battery system.
When Car Washing
Do not expose the product, including the speakers
and tapes, to water or excessive moisture. This
could cause electrical shorts, fire, or other damage.
Protect the Tape Mechanism
Keep magnets, screwdrivers, or other metallic
objects away from the tape mechanism and tape
head to prevent poor performance or malfunctions.
When Parked
Parking in direct sunlight can produce very high
temperatures inside your vehicle. Give the interior a
chance to cool down before switching the unit on.
Note: The preset memory is cleared to return to the
original factory setting when the power connector or
battery is disconnected.
What is XM Satellite Radio?
XM Radio is broadcastiog over 120 digital channels of totally new music, news, sports and children's
programming direct to vehicle and homes via satellite and our extensive repeater network, which supplements the
satellite signal to ensure seamless transmission. The channels originate from XM's broadcast center, the world's
largest all-digital studio complex in Washington, DC, and uplink to our two (Boeing 702) satellites, These
satellites transmit the signal across the entire continental United States. Each satellite provides 18kw of total
power making them the two most powerful commercial satellites ever built, providing coast-to-coast coverage.
XM Satellite Radio is changing the way people listen to radio in the same way cable changed television.
1. Operating Instructions ..................................................................................................1
2. Supplied Hardware.............................................................................1 set (➡ page 23)
3. Warranty Card...............................................................................................................1
Accessories
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Contents
Safety Information (Part 15 of the FCC Rules) . . . . . . . . . . . . . . . . . . page 2
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Use this product safely. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
❒ Power and Sound Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Power, volume, mute, loudness, audio mode (Bass/Treble/Balance/Fader)
❒ Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Clock display change, Initial time, time seting and reset
❒ Alarm Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Initial alarm time, alarm time setting and reset, alarm operation,
alarm output volume selection
❒ Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radio mode, band, manual tuning, seek tuning,
preset station setting, preset station calling, weather band station tuning
❒ Cassette Tape Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How to load, Rewind, Fast forward, play side change, eject a cassette tape
❒ CD changer control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Play, repeat, random, scan, error messages
Note: CD changer controls are applicable to units with optional CD changer
unit (sold separately)
❒ XM Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
XM Mode, Band, Channel Selection, Category Priority Setting and Selecting,
Manual Preset Memory. Preset Memory Calling, Display Change,
XM ID Confirmation, Error Display
❒ Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Preliminary steps, if you suspect something wrong, troubleshooting tips
❒ Speaker connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❒ Product servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❒ Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❒ Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Overview, required tools, dashboard specifications, identify all leads,
connect all leads, final installation, final checks, preparation,
dashboard installation, installation hardware, to remove the unit
❒ Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Caution, wiring diagram
❒ Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Power and Sound Controls
Power
Turn the key in the ignition until the
accessory indicator lights.
Power on: Press [PWR] (power).
Power off: Press [PWR] (power) again.
C
AC
ON
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
Volume
Mute
Turn the knob clockwise to increase volume,
and counterclockwise to decrease volume.
Press [MUTE] to mute the sound completely.
Mute blinks
Volume level (0 to 40)
(default: 18)
Press [MUTE] again to cancel.
Loudness
Press and hold [MUTE] (LOUD) for more than 2
seconds. to enhance bass and treble tones at low
or medium volume.
Up
Down
Loudness indicator
Press and hold [MUTE] (LOUD) for more than 2
seconds again to cancel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Power and Sound Controls
(Continued)
Note: If no operation takes place for more than 5
seconds in audio mode (2 seconds in
volume mode), the display returns to the
regular mode.
Audio Modes
(Bass/Treble/Balance/Fader)
q Push [SEL] to select the audio mode.
VOLUME
BASS
TREBLE
FADER
BALANCE
push
APM
DISP
MODE
CLK
PWR
BAND
ALM
LOUD
CQ-4330U
VOL
PUSH
MUTE
TUNE
SEL/SAT
SEEK
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
ILL
w Turn [VOL] (volume) clockwise or
Illumination Switching
counterclockwise to change each level.
Press [SCAN] (ILL) for more than 2 seconds
Bass:
to switch the illumination color (green/amber).
default : 0 dB
Adjustable range: –12 to +12 dB (by 3 dB step)
Treble:
default : 0 dB
Adjustable range: –12 to +12 dB (by 3 dB step)
Balance:
R (right speaker) or L (left speaker)
Adjustable range:
1 to 15 (by 1 step)
Balance center
(default)
Fader:
F (front speaker) or R (rear speaker)
Adjustable range:
1 to 15 (by 1 step)
Fader center
(default)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Clock Setting
The 12-hour system is used for the clock.
Selecting the Clock Display
Press [CLK] (clock) to switch clock and alarm time
display both.
Initial Time
clock display
Alarm time display
“SET” is displayed when the clock is not adjusted.
Note: if no operation takes place for more than 5
seconds in alarm time, the display returns to the
clock display.
APM
BAND
DISP
MODE
CLK
PWR
ALM
LOUD
CQ-4330U
VOL
PUSH
MUTE
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
[{] (Hours)
[}] (Minutes)
Time Setting
q Press and hold [CLK] (clock) and do not release
to set time. Display blinks and the time setting
mode is activated.
(blink.)
Hours
w Press [{] to set the hour.
(Hours set.)
Minutes
e Press [}] to set the minute.
(Minutes set.)
r Once the time has been set, release [CLK].
Time Reset
When you want to reset the time, repeat steps q to
(End.)
r.
Note: Press and hold [{] or [}] to change
Note: the current time will be displayed at all the
numbers rapidly.
time even the power of the radio is turned off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Alarm Time Setting
The 12-hour system is used for the clock.
Initial Alarm Time
Press and hold [ALM] (Alarm)
“AM 12:00” is displayed when the alarm is not adjusted.
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
[{] (Hours)
[}] (Minutes)
Alarm Time Setting
q Press and hold [ALM] (Alarm) and do not
release to set alarm time. Display blinks and
the alarm time setting mode is activated.
Alarm Operation
• Alarm is switched to ON or OFF each time [ALM] is pressed.
• When the alarm is switched to ON, the alarm will sound at the set
alarm time.
Turning off the Alarm Sound
(blink.)
The alarm will turn off automatically after 90 seconds. Otherwise,
press [ALM] once.
Hours
w Press [{] to set the hour.
Alarm output Volume Selection
(Hours set.)
You can select ALARM VOL 1 (or VOL 2) by pressing [ALM] in
sequence and the display will show as follows.
Minutes
e Press [}] to set the minute.
a
a
OFF
(Minutes set.)
r Once the alarm time has been set, release
[ALM].
Note: Press and hold [{] or [}] to change
Cautions:
numbers rapidly.
• Be careful not to set wrong alarm time, otherwise, the alarm
may sound while driving.
• If the alarm is set, be sure to check the set alarm time by
pressing [CLK].
• If volume is set at “0” level, the output volume will be muted.
(Even when ALARM is acting.)
Alarm Time Reset
When you want to reset the alarm time, repeat
steps q to r.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Radio
Radio mode
q
Press [MODE] to switch the operation mode as follows:
Radio
TAPE
CD Changer Control
a
a
c
(When a CD changer is connected)
(When a Tape is inserted)
FM stereo indicator
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
w Band
Press [BAND] to change the band.
e Scan
• Press [SCAN], each station will be scanned sequentially and the display
will blink for 5 seconds.
• Press [SCAN] again to stop scanning and the last station will continue to
broadcast.
r Manual Tuning
[}]: Higher frequency
[{]: Lower frequency
Seek Tuning
Press and hold for more than 0.5 seconds and release it.
[}]: Higher frequency
[{]: Lower frequency
Tuning will automatically stop when the signals of the next
broadcast station is received.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Radio
(Continued)
Preset Station Setting
Up to 6 stations can be saved in each of the FM1, FM2
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
Band
q
Press [BAND] to select a desired band.
(➡ page 9)
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
Preset buttons from [1] to [6]
Auto Preset Memory (APM)
w
Press and hold [BAND] (APM: auto preset memory) for more
than 2 seconds.
• The 6 stations with good reception will be automatically
saved in the memory under preset buttons from [1] to [6].
• Once set, the preset stations are sequentially scanned for 5
seconds each.
• Press [BAND] again to stop sequentially scan.
Manual Preset Memory
q Use manual or seek tuning to find a station. (➡ page 9)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
blinks once
Preset Station Calling
Caution: To ensure safety, never attempt to preset stations
while you are driving.
Press the corresponding preset button from [1]
to [6] to tune in a preset station.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
Tuning in a Weather Band Station
• Press [BAND] to select WB (Weather Band). (a page 9)
• Press any of the buttons [1] to [6] to monitor the preset station.
WB
Weather Band Frequency (channel) Number
Note: The weather band (CH1-6) has been preset. CH7 is selected by
pressing [}] or [{].
Weather Band Stations
National Weather Radio Broadcasts from over 380 Iocations throughout the
U.S. on seven VHF/FM frequencies.
Tune to weather band to receive continuous weather information 24 hours
a day on one of the following frequencies.
1. 162.550 MHz
2. 162.400 MHz
3. 162.475 MHz
4. 162.425 MHz
5. 165.450 MHz
6. 162.500 MHz
7. 162.525 MHz
Occasionally the frequency of an existing or planned station must be
changed because of unexpected radio frequency interfere with adjacent
NOAA weather Radio Stations and/or with other Government or
commercial Operations within the area. If you have a question concerning
NOAA Weather Radio, please contact your nearest National Weather
Service Office.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Cassette Tape Player
Loading a Cassette
Ejecting the Tape
Insert the cassette with the exposed tape side facing
to the right. Gently push the cassette in until the
loading begins. The cassette will be loaded in place
and playback starts.
Press [u] and the cassette will eject for removal, and the
previous mode of operation will be resumed.
Notes:
• If power is switched off before [u] is pressed, the cassette
will not eject. Switch on the power again and press [u] to
eject the cassette.
• The cassette tape should always be removed from the
cassette slot when not in use.
Program Indicator
DISP
MODE
LOUD
MUTE
Play Side Change
OL
USH
Press [̇̈] to switch to the program on the other side of
SEL/SAT
DISC
ASS/TREB
L/FADER
SCAN
ILL
the tape.
1
MTL
2
N
The display changes to indicate which program is
playing.
Exposed Tape side
Top Side Playing
Caution: Do not insert a tape when “tape”
indicator “̅” or “̃” lights.
Bottom Side Playing
Note: To maintain your cassette player in top
condition, avoid using tapes that are longer than
90 minutes (C-90).
Cassette Head Cleaning Warning
• The display will show “CLN HEAD” to remind you to clean
the cassette head after accumulating 100 hours tape
playing.
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the
slack as shown. If a loose tape is used, this may
result in the tape becoming tangled in the
rotating parts of the unit.
• Press and hold [̇̈] for more than 2 seconds to clear the
“CLN HEAD” display and the TAPE mode display will
resume. (It is valid only in TAPE mode.)
Rewind and Fast Forward
Press [1 TRACK] or [2 TRACK] to activate rewind or
fast forward of the tape.
Pencil
Exposed end
(Open end)
Program Indicator
Program Indicator
Do not touch
or pull out
the tape.
Press [̇̈] to stop rewind or fast forward.
If you rewind the tape fully, it will play on the same program
side again.
If you fast forward to the end, play will resume from the
beginning of the other side of the tape.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
Metal Tape Mode
Blank Skip
Press [1] (MTL) when playing metal or chromium
dioxide (CrO2) tapes.
Press [5] (SKP) to skip unrecorded portions
longer than 15 seconds on the tape.
Press [1] (MTL) again to cancel.
Press [5] (SKP) again to cancel.
Note: Playing normal tapes in metal tape mode
causes high frequency imbalance, which affects
tone quality.
Note: When repeat is on, the blank skip does not
work because the repeat has priority over the
blank skip.
Dolby B Noise Reduction
Repeat Play
Press [2] (NR) to set the Dolby B NR mode.
Press [4] (REP) to repeat the current
program.
Press [2] (NR) again to cancel.
Press [4] (REP) again to cancel.
Note: Set the Dolby B NR mode when playing back
a tape recorded with Dolby B Noise Reduction.
Note: The TPS and SKP mode may not
work correctly in the following cases.
This, however, does not mean that the
unit is defective.
• There is an interval less than 3 (15 in
SKP mode) seconds or having a high
level of noise or hum between
programs.
Tape Program Search (TPS)
Operation
q Press [3] (TPS) to activate the tape program
search mode.
• There is particularly low-level
passage during the program.
w To select a desired program, press [2
TRACK] or [1 TRACK] corresponding times
to go forward (up to 9) or backward (up to 8).
(Rewind:)
(Fast forward:)
8
0
c
1
9
c
e Press [3] (TPS) again to cancel.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
CD Changer Control
CD Changer mode
q
While a disc magazine is inserted in
the CD changer, press [MODE] to
select CD changer mode.
Play starts from the first track.
Playing Time
Disc Number
Track Number
APM
DISP
MODE
CLK
ALM
PWR
BAND
LOUD
MUTE
CQ-430U
VOL
PUSH
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
ILL
lights when a
CD changer is connected
Disc Selection
w
e
[1] ({ DISC): Previous disc.
[2] (} DISC): Next disc.
Track Selection
Press [TRACK 2] once to go to the next track. Press
repeatedly to step forward through all the tracks.
Press [TRACK 1] once to play from the beginning of the
current track, Press twice to play the previous track. Press
repeatedly to step backward through all the tracks.
Track Search
Press and hold [TRACK 2] or [TRACK 1] for more than
0.5 seconds to activate fast forward or reverse through a track.
Release it to resume the normal CD play from that position.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Note:
CD changer functions are applicable to units with optional CD changer unit. (sold separately)
• Press [4] (CD SCAN). The track number blinks
and the first 10 seconds of each track on the
blinks
Scan Play
discs play in sequence.
(Tracks)
• Press [4] (CD SCAN) again to cancel and
continue with the current track.
• Press and hold [4] (CD SCAN) for more than 2
seconds. The first track of all the discs in the
magazine is played for 10 seconds each and
Disc Number blinks.
• Press and hold [4] (CD SCAN) for more than 2
blinks
Scan Play
(Discs)
seconds again to cancel.
lights REP: Repeat lndicator
Repeat Play
(Tracks)
• Press [5] (RPT) to repeat the current track.
• Press [5] (RPT) again to cancel.
• Press and hold [5] (RPT) for more than 2
seconds to repeat the current disc.
• Press and hold [5] (RPT) for more than 2
seconds again to cancel.
blinks REP: Repeat lndicator
Repeat Play
(Discs)
lights R̈: Random indicator
• Press [6] (RDM) to random selection. Music is
played from all available CDs.
• Press [6] (RDM) again to cancel.
Random Play
(Tracks)
• Press and hold [6] (RDM) for more than 2
seconds all the available tracks on the current
disc play in a random sequence.
• Press and hold [6] (RDM) for more than 2
seconds again to cancel
blinks R̈: Random indicator
Random Play
(Discs)
Error Display Messages
Disc is dirty, or is upside down.
➡ Select the next available compact disc. Check the disc.
Disc has scratches.
➡ Select the next available compact disc. Check the disc.
No operation by some cause.
➡ Eject the magazine. If failure persists, press the reset switch on the CD
changer. If normal operation is not restored yet, call the store where you
purchased the unit or the nearest panasonic service center to ask for
repairs.
No disc in the changer (magazine)
➡ Insert discs into the changer (magazine).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
XM Control
Preparation:
Connect the XM receiver (XM DIRECT MODEL:XM-RVR-D-OO1) to the Unit CQ-4330U.
XM satellite radio is available on a chargable basis.
q XM Mode
(When a XM receiver is connected.)
r Channel Scan
Press [MODE] to change to the XM mode.
Press [SCAN], each channel
in ascending order will be
scanned sequentially and
the display will blink for 5
seconds.
APM
BAND
DISP
MODE
CLK
ALM
PWR
LOUD
MUTE
CQ-4330U
VOL
PUSH
Press [SCAN] again to stop
scamming and the last
channel will continue to
broadcast.
TUNE
SEEK
SEL/SAT
DISC
CD SCAN
RPT
RDM
BASS/TREB
BAL/FADER
SCAN
ILL
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
[CATEGORY]
XM displays as follows, (Example)
w Band
Press [BAND].
after 2 seconds
Satellite Radio
Indicator
e Channel Selection
Preset Number
Channel Number
after 5 seconds
Press [}]: Up
XM Band
Press [{]: Down
Press and hold [}] or [{] for more than 2
seconds to change channels rapidly.
Channel Name
Category Priority Setting and Selecting
• Push the knob [SEL] for more than 2 seconds.
(Push and hold)
(without operation during 2 seconds.)
(when category is set ON.)
(when category is set OFF.)
(blinks)
(without operation during 5 seconds.)
category name
turn right
turn left
(interdisplay for 2 seconds.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
• When the display shows “CAT ON”,
Press [2] (}): Up
Press [1] ({): Down
(without operation during 5 seconds.)
1
MTL
2
NR
1
MTL
2
NR
Category Name
Category Name
Press [2] or [1].
(Receiving)
(Received)
(interdisplay for 2 seconds.)
category on indicator
Push and hold the knob [SEL] for more than 2 seconds
to resume the normal display.
Notes:
CAT OFF: Every channel can be selected from every category.
CAT ON: Only channels in the current category can be selected.
Default: CAT OFF
Manual Preset Memory
Up to 6 channels each can be saved in the XM1, XM2 and XM3 preset station memories.
q Select a band and a channel.
BAND
TUNE
SEEK
w Press and hold [1] to [6] for more than 2 seconds to memorize.
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
• The channel number and the preset number blink once.
Note:
Existing saved channels are overwritten with new channels after the above procedure.
Preset memory Calling
q Select a band.
w Press [1] to [6].
1
MTL
2
NR
3
TPS
4
REP
5
SKP
6
BAND
Note:
When category is on category will be off after pressed any preset button [1] to [6].
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
XM Control
(Continued)
Display Change
Press and hold [MODE] (DISP) for more than 2 seconds.
MODE
Channel name
(Press and hold)
(Reading artist name)
Artist name
(Reading song title)
Song title
(Reading category)
Category name
Note:
Display when there is no name/title or can not decode.
XM ID Confirmation
• Push and hold the knob [SEL] for more than 2 seconds and then push again during 2 seconds.
(Push and hold) (Push)
Note:
If the ID number is 12345678 for example.
• Push the knob for more than 2 seconds to resume to the previous mode when displaying “RADIO ID” or ID number.
• You can also see ID number by selecting CH0.
Error display
XM ID is communication fails, Press [MODE] to another mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Troubleshooting
Preliminary Steps
Cautions:
Check and take steps as described in the tables below.
• Do not use the unit if it malfunctions or if there is
something wrong.
• Do not use the unit in irregular condition, for
example, without sound, or with smoke or foul
smell, which can cause ignition or electric shock.
Immediately stop using it and call the store where
you purchased it.
If You Suspect Something Wrong
Immediately switch the power off.
Disconnect the power connector and check that there is
neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit by yourself because it
is dangerous to do so.
Troubleshooting Tips
❐ Common
Trouble
Cause/Step
Vehicle’s ignition switch is not on.
a Turn your vehicle’s ignition switch to ACC or ON.
Cables are not correctly connected.
a Connect cables correctly.
Battery cable is not correctly connected.
a Connect the battery cable to the terminal that is always active.
No power.
Power connector is not correctly connected.
a Connect the power connector to your vehicle’s ACC source.
Grounding wire is not correctly connected.
a Connect the grounding wire to a metal part of the vehicle.
Mute is set to ON.
a Set it to OFF.
No sound.
Noise.
Cables are not correctly connected.
a Connect cables correctly.
The ground lead is not connected properly.
a Connect the ground lead properly.
❐ XM Control
Trouble
Cause/Step
Antenna no connection
a Check the XM receiver's antenna.
Antenna
No singl
off air
No XM signal
a select a channel which can be received.
No chanel service
a select a channel which can be received.
The original channel cannot receive signal.
a select a channel which can be received.
No info
XM non
Do not connect the XM receiver completely.
a Check the XM receiver's connections.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Troubleshooting
❐ Radio
(Continued)
Trouble
Cause/Step
The antenna ground lead is not connected properly.
a Connect the antenna ground lead properly.
Much noise in FM stereo
and monaural broad-
casts.
The radio antenna is not extended enough.
a Extend fully the radio antenna.
Battery cable is not correctly connected.
a Connect the battery cable to the terminal that is always active.
Preset station is reset.
❐ Cassette Tape
Trouble
Cause/Step
Blank tape is inserted in the unit.
a Insert recorded tape into the unit.
No sound.
Heads are dirty.
a Clean heads. (See page 12)
Tape sound quality is
poor.
Poor quality tape.
a Use better quality tape.
Dolby B NR tape plays with Dolby B NR off.
a Set Dolby B NR to ON.
High tones are
improperly emphasized.
Metal type tape plays with normal mode.
a Change Normal mode to Metal mode.
Non-Dolby B NR tape plays with Dolby B NR on.
a Set Dolby B NR to OFF.
Reproduction of high
tones is poor.
Normal type tape plays with Metal mode.
a Change Metal mode to Normal mode.
Heads are magnetized.
a Demagnetize heads. (Ask a service representative for advice.)
Tape running mechanism is dirty or out of order.
a Clean tape running mechanism, or repair it. (Ask a service
representative for advice.)
Wow and flutter level is
very high.
❐ Sound Setting
Trouble
Cause/Step
Left and right balance, or front and rear balance is off on one side.
a Adjust balance/fader setting as appropriate.
No sound from left, right,
front, or rear speaker.
Cables are not correctly connected.
a Connect the cables correctly.
Left and right sounds are
reversed in stereo
listening.
The right speaker wire is connected to the left speaker and the left speaker
wire to the right speaker.
a Connect the speaker wires to the correct ones.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Speaker Connections
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
<Right>
• Use ungrounded speaker only.
• The maximum speaker input should be 37 W or more. (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
(White)
+
-
+
L
-
(White
w/black stripe)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately
using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
(Gray)
+
-
+
R
-
(Gray
w/black stripe)
<Wrong>
+
-
+
-
+
-
+
+
-
+
+
L
L
L
-
-
-
Chassis
Chassis
+
-
+
-
+
-
+
+
-
+
+
R
R
R
-
-
-
• Never connect the speaker cord to
the body of the car.
• Do not use a 3-wire type speaker
system having a common earth
lead.
• Do not connect more than one
speaker to one set of speaker
leads.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced only by a qualified technician.
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Caution
This product is designed without a fuse inside due to fuses already exist in your vehicle. We would recommend to use
fuses of the specified rating (10 A). Using fuses that exceed the prescribed capacity could cause this product to start
smoking, ignite or other malfunction.
If your vehicle is without the fuse or a circuit braker to protect this unit ,please your dealer add the specified fuse 10 A
or a circuit breaker at the BATTERY lead of your vehicle's harness. please see page 26 to find out where "BATTERY +
12 V" is for your dealer adding the fuse or the circuit breaker.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Installation Guide
WARNING
❐ This installation information is designed for experienced installers and is not
intended for non-technical individuals. It does not contain warnings or cautions of
potential dangers involved in attempting to install this product.
Any attempt to install this product in a vehicle by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.
❐ If your vehicle is equipped with air bag and/or anti-theft systems, specific procedures
may be required for connection and disconnection of the battery to install this product.
Before attempting installation of this electronic component, contact your vehicle
dealer or manufacturer to determine the required procedure and strictly follow their
instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOY-
MENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN
DAMAGE TO THE VEHICLE AND PERSONAL INJURY.
…Keep for future reference in case the product needs
servicing.
• Installation Hardware…Needed for in-dash installation.
❐ Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through the
remaining steps:
(Please refer to the “WARNING” statement above.)
❐ Dashboard Specifications
3
Thickness Min. ⁄16" (4.75 mm)
7
Max. ⁄32" (5.56 mm)
• Identify and label the car wires.
• Connect the car wires to the wires of the power
connector.
3
2 ⁄32" (53 mm)
• Install the unit in the dashboard.
• Check the operation of the unit.
5
7 ⁄32" (182 mm)
If you encounter problems, please consult your nearest
professional installer.
Caution: This unit operates with a 12 V DC negative
ground auto battery system only. Do not attempt to
use it in any other system. Doing so could cause
serious damage.
Before you begin installation, look for the items which
are packed with your unit.
• Warranty Card…Fill this out promptly.
• Panasonic Servicenter List for Service Directory
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
❐ Preparation
❐ Installation Hardware
Warning: If your vehicle is equipped with air bag
and/or anti-theft systems, specific procedures may
be required for connection and disconnection of the
battery to install this product.
No.
Item
Diagram Q’ty
Mounting Collar*
1
q
Before attempting installation of this electronic
component, contact your vehicle dealer or
manufacturer to determine the required procedure
and strictly follow their instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY
RESULT IN THE UNINTENDED DEPLOYMENT OF
AIR BAGS OR ACTIVATION OF THE ANTI-THEFT
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE
AND PERSONAL INJURY.
Plain washer (5mmø)
Spring Washer (5mmø)
Hex. Nut (5mmø)
2
2
2
1
1
1
2
1
w
e
r
t
y
u
i
o
Rear Support Strap
Hex. Bolt
(5mmø × 25 mm)
• Disconnect the cable from the negative
terminal (see warning and caution below).
battery
Toothed Lock Washer
(5mmø)
• Remove Mounting Collar q from the main unit
temporarily, which are already mounted at shipment.*
Removal Tool
(U-shaped)
Caution: Various settings that have been stored in
the memory in other on-board equipment (vehicle
navigation etc.) may be lost if the battery terminals
are disconnected.
Antenna Connector
Therefore, we recommend to make a record of or to
back up the settings before disconnecting the
terminals.
After completing installation of the main unit, set the
equipment again according to the record.
(a) Using the rear support strap t
• Unit should be installed in a horizontal position with
the front end up at a convenient angle, but not more
than 30˚.
❐ Dashboard Installation
Installation Opening
(b) Using the rubber cushion (option)
This unit can be installed in any dashboard having an
opening as shown below. The dashboard should be
3/16” (4.75 mm) – 7/32” (5.56 mm) thick in order to be
able to support the unit.
Rear support bracket
Rubber cushion (option)
(provided on the vehicle)
Mounting bolt
(5 mmø)
q Mounting collar
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Installation
(Continued)
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
First complete the electrical connections, and then check them for correctness.(a page 26)
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Insert Mounting Collar q into the
dashboard, and bend the mounting tabs
out with a screwdriver.
1
The tabs to be bent vary depending on
the vehicle. To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Tab
Example:
q Mounting
Power Connector
Collar
Mounting Holes
Mounting Bolt
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
2
3
Mounting springs (C)
After installation reconnect the negative
(–) battery terminal.
Engage the Mounting
Springs (C) in the
mounting holes of the
Mounting Collar q
firmly.
Mounting
Hole
Mounting Spring
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
To Remove the Unit from the vehicle's dashboard
Insert each Removal Tool i and pull.
i Removal Tool
(U-shaped)
Note: Do not lose Removal Tools. They will be needed to remove the unit from the vehicle's dashboard.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Electrical Connections
Cautions:
• This wiring information is for experienced technical individual, for safety reason, please your dealer wire this
connection.
• This product is designed to operate with a 12 V DC, negative ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased
when the battery terminals are disconnected.
❐ Wiring Diagram
XM control connector
CD changer / XM control connector
10 12 14 16
9
7
11 13 15
CQ-4330U
5
3
1
8
6
4
2
Antenna
(Rear Side)
Detail of power connector
ቪ Antenna Connector
NO.
1
2
3
4
FUNCTION
BATTERY +12 V
GROUND
ůůůů
ůůůů
ůůůů
NO.
9
10
11
12
13
FUNCTION
Power Connector
REAR SP R (–)
REAR SP R (+)
FRONT SP R (–)
FRONT SP R (+)
FRONT SP L (–)
FRONT SP L (+)
REAR SP L (–)
REAR SP L (+)
ŏThe power connector does not come
along with the unit. If need, please
consult your dealer.
5
6
POWER +12 V ACC 14
7
8
ůůůů
ůůůů
15
16
Accessory Power(ACC)
(+12V DC, negative ground
only)
(Red)
(Black)
(Yellow)
ACC
Ground Lead
(Connect to a clean, bare
metallic part of your vehicle)
Ground
Battery
Battery Lead
(Connect to vehicle battery)
(Violet/Black)
(Green)
(Gray/Black)
(white)
(Gray)
(Violet)
(Green/Black)
(White/Black)
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Rear)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Electrical Connections
(Continued)
❐ Upgrading the system (connect a XM receiver)
Note:
For wiring, carefully read the operation instructions for the devices connected.
XM control connector
(2P connector)
CQ-4330U
XM control connector
(10P connector)
power
RCA (Red) R
R
audio out
L
RCA (White) L
8P DIN (Male)
FM out
R
antenna
contoroller/
head unit
Extension Cable for connecting the unit and the XM receiver.
ŏThe Extension cable does not come along with the unit,
if need, please consult your dealer.
XM ANT
XM RECEIVER
(XM-RVR-D-001)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Electrical Connections
❐ Upgrading the system ( connect a CD changer )
Note:
For wiring, carefully read the operation instructions for the devices connected.
XM control connector
(2P connector)
CQ-4330U
CD changer connector
(10P connector)
CD Changer (CD-DP880, option)
Extension Cable for connecting the unit and CD changer.
ŏThe Extension cable does not come along with the unit,
if need, please consult your dealer.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Specifications
❐ General
Power Supply:
12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground
Less than 2.5 A (tape mode, 0.5 W 4-speaker)
37 W × 4 channels at 400 Hz, Volume Control maximum
Current consumption:
Maximum Power Output:
Tone adjustment range:
Bass:
12 dB at 100 Hz
Treble:
12 dB at 10 kHz
Power Output:
18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
4-8 Ω
7" × 1-15/16" × 6-1/10" (178 × 50 × 160 mm)
3 lbs. 12 oz (1.7k )
Suitable Speaker Impedance:
Dimensions (W × H × D):
Weight:
❐ FM Stereo Radio
Frequency Range:
87.9-107.9 MHz
Useable Sensitivity:
12 dBf. (1.1 µV/ 75 Ω, S/N 30 dB)
17 dBf. (1.8 µV/ 75 Ω)
30-15 000 Hz 3 dB
75 dB
50 dB Quieting Sensitivity:
Frequency Response:
Alternate Channel Selectivity:
Stereo Separation:
35 dB at 1 kHz
Signal/Noise Ratio:
70 dB (Mono)
❐ AM Radio
Frequency range:
Usable sensitivity:
530 kHz–1 710 kHz
28 dB/µV (25 µV, S/N 20 dB)
❐ Weather Band Radio
Frequency Range:
Useable Sensitivity:
Signal/Noise Ratio (40 dB/µV):
162.40-162.55 MHz
3 dB/µV (S/N 20 dB)
50 dB
❐ Tape Player
Reproduction System:
Tape Speed:
FF/REW Time:
Frequency Response:
Wow and Flutter:
signal/Noise Ratio:
4-track, 2-program stereo
1-7/8"/sec (4.76 cm/sec)
Less than 110 sec (C-60)
35-14 000 Hz 3 dB
0.12 % (WRMS)
52 dB (Dolby NR on: 62 dB)
Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in technology.
Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol A are trademarks of Dolby Laboratories Licensing Corporation.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-4330U
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way, Secaucus,
New Jersey 07094
YFM284C419ZA TAMACO0304-0 Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|