Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BD89
DMP-BD79
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 14) or
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
Register online at www.panasonic.com/register (U.S. customers only)
P
PC
VQT4V11
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Wireless LAN connection
The following limits are in place regarding the usage of this unit or
Wireless LAN Adaptor. You must be aware of these limits before
using these devices.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of these devices.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
≥ This unit and Wireless LAN Adaptor contain delicate
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
electronic components.
Please use these devices in the manner in which they were
intended and follow the following points:
AC power supply cord
≥ The power plug is the disconnecting device. Install this unit so that
– Do not expose these devices to high temperatures or direct
the power plug can be unplugged from the socket outlet
immediately.
sunlight.
– Do not bend, or subject these devices to strong impacts.
– Keep these devices away from moisture.
– Do not disassemble or alter these devices in any way.
CAUTION
Unit
Restriction on use of
unauthorized copied content
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles, on
this unit.
This unit adopts the following technology for copyright protection.
Cinavia Notice
Placement
This product uses Cinavia technology to limit the use of unauthorized
copies of some commercially-produced film and videos and their
soundtracks. When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia
request additional information about Cinavia by mail, send a postcard
with your mailing address to:
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Batteries
Mishandling of batteries can cause electrolyte leakage, which can
damage items the fluid contacts and may cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same
time.
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.
To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete the
user settings. (> 30, “To return all settings to the factory preset.”)
≥ The operation history may be recorded in the memory of this unit.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
(Inside of product)
VQT4V11
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Settings
IMPORTANT SAFETY
INSTRUCTIONS. . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . 3
Option menu . . . . . . . . . . . . . . 22
Setup menu. . . . . . . . . . . . . . . 24
Getting started
Reference
Accessories . . . . . . . . . . . . . . . 5
Unit and media care . . . . . . . . . 5
Playable media. . . . . . . . . . . . . 6
Control reference guide . . . . . . 8
LED indicators. . . . . . . . . . . . . 28
Messages . . . . . . . . . . . . . . . . 29
Troubleshooting guide . . . . . . 30
Specifications . . . . . . . . . . . . . 33
Limited Warranty . . . . . . . 37, 38
Referencia rápida en español
Connections & Settings
(Spanish Quick Reference). . . . 39
Index . . . . . . . . . . . . . Back cover
Connecting to a TV. . . . . . . . . . 9
Connecting to
an amplifier/receiver . . . . . . . 10
Connecting to the network . . . 11
Settings . . . . . . . . . . . . . . . . . 12
Playback
Inserting or
removing media . . . . . . . . . . 15
HOME menu. . . . . . . . . . . . . . 15
Multi User Mode . . . . . . . . . . . 16
Playback. . . . . . . . . . . . . . . . . 17
Network Service
(Enjoying Netflix, etc.). . . . . . 19
Home Network feature . . . . . . 20
“HDMI CEC” . . . . . . . . . . . . . . 21
VQT4V11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Unit and media care
Check the supplied accessories before using this
unit.
∫ Clean this unit with a soft, dry
cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
1
Remote control
(N2QAYB000867)
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
2
1
Batteries for remote control
AC power supply cord
(K2CB2CB00022)
∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
[For_Canada]
The enclosed Canadian French label sheet corresponds
to the English display on the unit.
∫ Clean discs
≥ Product numbers provided in this Owner’s Manual correct
as of December 2012. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
DO NOT
DO
Wipe with a damp cloth and then wipe dry.
∫ Using the remote control
Insert so the poles (i and j) match those in the
remote control.
∫ Disc handling precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
R6/LR6, AA
(Alkaline or manganese batteries)
Point it at the remote control signal sensor on this
unit. (> 8)
VQT4V11
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable media
Media
markings
Device
Device types
Contents format
BD-Video
BD-RE
BD-R
Video
Video, JPEG
Video, MKV
BD
DVD-Video
DVD-R
Video
Video, AVCHD,
MKV, JPEG, AAC,
FLAC, MP3, WAV, WMA
DVD
DVD-R DL
DVD-RW
Video, AVCHD
Music [CD-DA]
—
+R/+RW/+R DL
Music CD
CD
MKV, JPEG,
CD-R
CD-RW
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA
—
MKV, MP4, MPEG2,
JPEG, AAC, FLAC,
MP3, WAV, WMA
USB devices
(up to 2 TB)
USB
—
≥ See pages 7 and 33 for more information on the types of content that can be played.
VQT4V11
6
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Discs that cannot be played in
this unit
∫ Music CD
≥ Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
Any other disc that is not specifically
supported or previously described.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
∫ Region management information
BD-Video
This unit can play BD-Video discs supporting the
region code “A”.
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
Example:
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.
DVD-Video
This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
Example:
1
2
1
ALL
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder needs to be finalized by
the recorder to play on this unit. Please refer to
the recorder’s instructions.
∫ BD-Video
≥ This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby® TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
≥ If “Dolby D/Dolby D +/Dolby TrueHD” is set to
“PCM”, the maximum possible number of
Dolby® sound is 2ch PCM. (> 24)
VQT4V11
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
1
2
Turn the unit on and off
TV operation buttons
11
You can operate the Panasonic TV using the
unit's remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers
Cancel
1
2
12
13
3
4
5
6
7
8
9
3
14
Select audio (> 17)
4
5
15
Basic playback control buttons (> 17)
Show status messages (> 18)
Show Pop-up menu/Top menu (> 18)
Show Option menu (> 22)
6
10 Colored buttons (red, green, blue, yellow)
Used for various purposes depending on the
display.
11 Transmit the remote control signal
12 Open or close the disc tray (> 15)
13 Show Setup menu (> 24)
14 Switch Secondary Video on/off
(Picture-in-picture) (> 23)
7
8
16
17
18
19
20
9
15 Show the Home screen of Network Service
(> 19)
16 Exit the menu screen
10
17 Show Netflix screen (> 19)
18 Show HOME menu (> 15)
19 [3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
20 Return to previous screen
4
3
2
1
5
6
7 8 9
1
Standby/on switch (Í/I) (> 12)
8
9
POWER LED
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
Start play (> 17)
Stop (> 17)
Open or close the disc tray (> 15)
Disc tray (> 15)
USB port (> 15)
INFO LED (> 28, “LED indicators”)
Displays the various states of this unit.
Blinks when the power is turned on.
Wait for the LED to turn solid green before
using this unit.
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
2
3
4
5
6
7
Rear panel terminals (> 9–11)
VQT4V11
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft.) or less.
HDMI cable
HDMI IN
To a household AC outlet
AC power supply cord (supplied)
≥ This unit consumes a small amount of AC power (> 33) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
VQT4V11
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier/receiver
HDMI cable
HDMI cable
HDMI OUT
HDMI IN
(ARC)
HDMI IN
(ARC)
Amplifier/receiver
≥ Set “Digital Audio Output” (> 24).
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
VQT4V11
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 14)
≥ You can enjoy BD-Live (> 18)
≥ You can enjoy Network Service (> 19)
≥ You can access other devices (Home Network) (> 20)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
– [BD89] : This unit has built-in Wi-Fi® and can be connected to a wireless router.
– [BD79] : For wireless capability, connect the Wireless LAN Adaptor DY-WL5 (optional). Only DY-WL5
can be used.
Read the operating instructions for DY-WL5 thoroughly when using it.
[BD89]
[BD79]
Wireless router, etc.
Internet
≥ For up-to-date compatibility information on your wireless router, refer to
(This site is in English only.)
For additional information about this unit refer to
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥ See page 3 for the precautions for wireless LAN connection.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
VQT4V11
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Wireless connection
1 Select “Wireless” and press [OK].
Easy Settings
[BD79] : If “Wireless LAN Adaptor is not
connected.” is displayed, check that the
Wireless LAN Adaptor is fully inserted.
Alternatively, disconnect and reconnect it. If
there is still no change in the display, consult
your dealer for advice.
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
2 Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK], then follow the on-screen
1 Press [Í].
instructions to continue with the settings.
Setup screen appears.
Wireless Settings
2 Follow the on-screen instructions and
apply the settings.
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
≥ You can perform this setup anytime by selecting “Easy
Settings” in the Setup menu. (> 26)
Easy Network Setting
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
∫ “WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected SetupTM), you can easily
perform the settings.
Wired connection
Select “Wired” and press [OK].
∫ “Search for wireless network”
The available wireless networks will be displayed.
Easy Network Setting
Select a connection mode.
To obtain your network name (SSID*) and
encryption key (password).
e.g.
The default settings may be
printed on the router. If the
SSID and password have been
changed, consult the person
responsible for setting up your
network.
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
Wired
Wireless
OK
For more details, refer to the
RETURN
manual supplied with the wireless broadband
router, or contact your Internet provider.
Follow the on-screen instructions to establish
your connection settings.
For more information or assistance, refer to
(U.S. customers only)
VQT4V11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Select your network name and press [OK].
≥ If your network name is not displayed,
search again by pressing the red button on
the remote control. Stealth SSID will not be
displayed; in this case, enter manually.
To enter your network name (SSID) manually
If your network name (SSID) is not displayed in
step 1, follow these steps.
1
To display the network name (SSID) input
screen :
While displaying the HOME menu, press the
[SETTINGS] button on the remote control
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
Press [OK] to select “SSID” and enter your
SSID.
Connection Setting
Select a wireless network for connection.
SSID
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
2
OK
Search again
Wireless Settings
OPTION
RETURN
Enter your network name (SSID) to connect.
When your wireless network is encrypted
SSID
2
Press [OK] to select “Encryption Key”.
Set
Wireless Settings
Enter the encryption key (password) of the wireless network.
≥ If your wireless network is encrypted, go to
step 2.
Encryption Key
Set
≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your wireless router supports
WPS, check the wireless router operating instructions.
≥ You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (> 25)
3
Enter your encryption key (password).
≥ You can switch between capital and lower
case letters by pressing the “Shift” key.
≥ You can redo these settings individually using “Network
Encryption Key (Password)
Settings”. (> 25)
≥ Do not use this unit to connect to any wireless network for
l
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of wireless router.
Shift
Delete
Finish
a
h
o
b
i
c
j
d
k
r
e
l
f
m
t
g
n
1
4
7
*
2
5
8
0
‘
3
6
9
#
“
p
w
/
q
x
:
s
z
_
u
v
y
.
@
,
Space
~
-
;
Symbols
Alphanumeric
Other Characters
≥ Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
OK
RETURN
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
VQT4V11
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Reprogramming the
remote control
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(> 27, “Remote Control Code”)
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME]
> press the [SETTINGS] button on the remote
control
> select “System” and press [OK]
> select “Firmware Update” and press [OK]
> select “Update Now” and press [OK]
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, INFO LED and
POWER LED flash 3 times (> 8, “Control
reference guide”), and “FIN” will be displayed on
the screen. Unit will restart and the following
screen will be displayed.
The firmware was updated.
Current Version: x.xx
OK
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit.
(> 27, “Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 27)
VQT4V11
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Inserting or removing
media
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Preparation
Turn on the TV and select the appropriate video
input on the TV.
1 Press [Í] to turn on the unit.
≥ After network service introduction banner is
shown, the HOME menu is displayed.
–When connected to the network, the
banner content may be changed.
–You can disable the “Start-up Banner”
(> 27).
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
2
Press [OK] or [
3,
4,
2,
1] to select the item.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥
If there are any other items, repeat this step.
HOME
Network
Blu-ray Disc Player
Photos
Setup
Music
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
Videos
Personalize
1st user
Videos/Photos/Music
Play back the contents. (
>
17)
Disc
≥ When multiple contents are
recorded, select the types
of contents or the title.
USB
Network
Network
Service
Displays the Home screen of
Network Service. (> 19)
DLNA Client (> 20)
Home Network
Media Renderer (> 20)
Setup
Player Settings (> 24)
USB Management (> 18)
Changes the background of
HOME menu.
Wallpaper
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (> 27)
VQT4V11
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi User Mode
Personalizing a new user
Multi User Mode allows individuals to customize
settings and switch to their saved settings easily.
Up to 4 people can use the unit with their own
settings.
1 Press [HOME].
2 Press the colored button that indicates
new user personalization.
The following settings can be personalized:
≥ The user icon
≥ The wallpaper of HOME menu
≥ The audio and picture settings (> 22, 24)
3 Select an item and change the settings
according to the indications.
The following items can be set.
Input
HOME
Personalize a user name.
Nickname
User 1
A
Network
Blu-ray Disc Player
Personalize a user icon.
Photos
Setup
Music
Select from Illustrations
The image can be selected from
Videos
prepared illustrations.
Select Icon
User 1
Personalize
2nd user
Create from Photos
B
You can select a photo in
recording media as an icon.
(> 22, “Icon Personalization”)
A
B
The user name and icon currently selected
Personalize a new user and switch between
users with colored buttons.
Personalize a background of the
HOME menu.
Select
Wallpaper
≥ In addition to default wallpapers,
you can select a photo in
recording media as a wallpaper.
(> 22, “Wallpaper”)
4 Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 27)
Switching the user
Press the colored buttons in the HOME menu
to switch to the user corresponding to the
button.
VQT4V11
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Operations during playback
1 Insert the media.
The following functions may not work depending
on the media and contents.
Playback starts depending on the media.
Stop
2 Select the item to play and press [OK].
Press [∫STOP].
Repeat this procedure if necessary.
The stopping point is memorized.
Resume play function
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
≥ MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥ To save on electricity, this unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused or displaying the
menu, displaying still pictures, etc.). (Compatible with
ENERGY STAR)
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
Search/Slow motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
Slow motion
While paused, press [SEARCH5].
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ Press [1PLAY] to revert to normal playback
speed.
Skip
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to change in succession
forward.
≥ Press [1PLAY] to revert to normal playback
speed.
Changing audio
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
VQT4V11
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying menus and
playback information
Enjoying BD-Live
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, connection of a USB device
is necessary along with Internet connection.
Show top menu/pop-up
menu
1 Perform network connection and settings.
Press [POP-UP MENU/TOP MENU].
≥ Select the item and press [OK].
(> 11, 12)
≥ [BD79] : Use a LAN cable for a network
connection.
Show the status messages
2 Connect a USB device with 1 GB or more
free space.
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or will disappear from the screen.
≥ Depending on media and contents, the display
may change or may not appear.
≥
The USB device is used as the local storage.
3 Insert the disc.
∫ Deleting data on the USB device
Select “USB Management” in the HOME menu
(> 15), then select “BD-Video Data Erase” and
press [OK].
e.g., BD-Video
A
B
BD-Video
T1 C1 0:05.14
Play
0:20.52
D
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
C
A
B
C
D
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Current position
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 26).
Total time
Slideshow
e.g., JPEG
Play a slideshow of photos and adjust various
settings during the playback.
1 / 26
Date
Size
Manufacturer
Equipment
11/12/2007
500 x 375
1 Insert the media.
2 Select “Photos”.
3 Select an item and press the green button.
The following items can be set.
Start the slideshow.
Start
Slideshow
You can display still pictures in
the selected folder one by one at
a constant interval.
Display
Interval
Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Repeat Play Set whether to repeat the slideshow.
≥ Still pictures displayed as “
” cannot be played back
with this unit.
VQT4V11
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Service
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of Network Service
(> 26, “Network Service Lock”)
– When correcting the displayed time
(Enjoying Netflix, etc.)
Network Service allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from Network Service Home screen. This unit
has no full browser function and some features of
websites may not be available.
≥ Some services such as Netflix require a
registered account.
For details of your Netflix account, refer to
Netflix.
(> 25, “Time Zone”, “DST”)
≥ If using slow Internet connection, the video may not be
displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update
notice is displayed on the screen. If the firmware is not
updated, you may not be able to use Network Service
function properly. (> 14)
≥ Network Service Home screen is subject to change without
notice.
≥ The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
Network Service provides a variety of
selected Internet services such as the
following.
≥ Some features of websites or content of the service may
not be available.
≥ Online movie rental service
≥ Video browsing service
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
Network Service
*
Settings
Internet
*
Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 11)
≥ Network setting (> 12)
1 Press [INTERNET].
≥ Netflix can be accessed directly by pressing
[NETFLIX] button.
2 Select the item and press [OK].
To exit from Network Service
Press [HOME].
VQT4V11
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Network feature
Using the Digital Media
Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
Playing back contents on
the DLNA server
You can share photos, videos and music stored in
the DLNA Certified media server (PC with
Windows 7 installed, smartphone, etc.) connected
to your home network, and enjoy the contents
with this player.
Possible applications:
≥ About support format of DLNA client (> 34).
≥ Before using the DLNA feature, be sure to
configure the DLNA server on your Home
Network.
*
Server
Renderer
*
Controller
*
Server
+
Renderer
Controller
Server
Player
*
DMC compatible software should be installed.
Preparation
Preparation
1
2
3
Perform network connection (> 11) and
network settings (> 12) of this unit.
Perform Home Network settings of the
connected equipment.
Add the contents and folder to the libraries of the
Windows Media® Player or the smartphone, etc.
Perform steps 1to 3. (> left)
4
Perform the “Remote Device Settings”. (
>
26)
≥ You can register up to 16 devices.
1 Press [HOME].
≥
Playlist of Windows Media® Player can play back
only the contents that are stored in the libraries.
2 Select “Network”.
3 Select “Home Network”.
4 Select “Media Renderer”.
1 Press [HOME].
2 Select “Network”.
3 Select “Home Network”.
4 Select “DLNA Client”.
5 Operate the DMC compatible devices.
To exit from Media Renderer screen
≥ The list can be updated by pressing the red
button on the remote control.
Press [HOME].
5 Select the equipment and press [OK].
6 Select the item to play and press [OK].
For more details, refer to the following website
and the operating instructions for each of the
equipment.
(This site is in English only.)
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
e.g.,
≥ Control Panel is
displayed once the
playback starts.
EXIT
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in gray on the display cannot be played
back by this unit.
Press [OK] if the
Control Panel is not
displayed, and press
≥ This unit can be played back via connected equipment only
when controlled using DMC.
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [HOME].
VQT4V11
20
Download from Www.Somanuals.com. All Manuals Search And Download.
“HDMI CEC”
Power off link
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.
See the operating instructions for connected
equipment for operational details.
Preparation
1
2
3
Set “HDMI CEC” to “On” (> 27). (The default
setting is “On”.)
≥ Operation cannot be guaranteed on all HDMI CEC
devices.
Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Repeat this procedure when the
connections or settings are changed.
Automatic input switching
Power on link
When play starts on the unit, the TV will
automatically switch the input channel and the
screen of this unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
VQT4V11
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Option menu
Operation Menu
A variety of playback operations and settings can
be performed from this menu.
∫ Soundtrack
Available options differ depending on the playing
contents and the condition of the unit.
Show or change the soundtrack.
∫ Audio channel
Select the audio channel number.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu.
Please refer to page 16 for details about user
registration and switching.
∫ Subtitle
Change the subtitle settings.
∫ Angle
Select the number of the angle.
1 Press [OPTION].
≥ When playing music, select “Playback
∫ Repeat Play
Settings” and press [OK].
Select the item that you want to repeat.
≥ The items displayed differ depending on the
type of media.
e.g., BD-Video
≥ Select “Off” to cancel.
Operation Menu
Soundtrack
1
ENG Dolby TrueHD ...
Subtitle
∫ Shuffle
Angle
1
Repeat Play
Status
Off
Select whether or not to play random.
Primary Video
Secondary Video
Top Menu
MPEG-4 AVC
∫ Start Slideshow
Start the slideshow.
Pop-up Menu
∫ Status
Show the status messages.
2 Select an item and change the settings.
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
To exit the screen
Press [OPTION].
Regarding Language : (> 34)
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 15)
∫ Icon Personalization
Set the still picture as your user icon. (> 16)
VQT4V11
22
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Video
The recording method of original video appears.
Video Settings
∫ Primary Video
∫ Picture Mode
The recording method of original primary video
appears.
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
∫ Secondary Video
∫ Picture Adjustment
Specific picture quality settings can be changed.
Select on/off for images. The
recording method of original
video appears.
≥ During search/slow motion or
Video
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
frame-by-frame, only the
primary video is displayed.
≥ When the content is distorted, change the
settings from “Auto” to “Video”.
Select on/off for audio and the
language.
Soundtrack
∫ 24p
∫ Top Menu
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “On” in “24p
Output” (> 24).
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Reset to Default Video Settings
Return video settings to the factory preset.
∫ Menu
Display Menu.
Audio Settings
∫ Dialog Enhancer
The volume of the center channel is raised to
make dialog easier to hear.
≥ This function is effective only when “Digital
Audio Output” is set to “PCM” (> 24).
VQT4V11
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
¾24p Output
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p* are output at 24p.
Change the unit’s settings if necessary. The settings
remain intact even if you switch the unit to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
≥
When playing DVD-Video, set to “On” and then set
“24p” in “Video Settings” ( 23) to “On”.
>
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
About Multi User Mode
: Settings of the items with this indication are saved
by the respective users registered in the HOME menu.
Please refer to page 16 for details about user
registration and switching.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color output when a TV that supports Deep
Color is connected.
1 While displaying the HOME menu, press
[SETTINGS].
¾Contents Type Flag
Player Settings
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
Picture Mode
Normal
Video
Picture Adjustment
HDMI Output
Audio
Language
Network
Ratings
System
*
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
OK
RETURN
Audio
2 Select an item and change the settings.
∫ Dialog Enhancer
(> 23)
To exit the screen
Press [HOME].
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby
TrueHD.
Video
∫ Picture Mode
(> 23)
∫ Digital Audio Output
∫ Picture Adjustment
(> 23)
Press [OK] to show the following settings:
∫ HDMI Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format. This
unit decodes the audio format and transmits to the
connected equipment.
¢”. When any item
without “ ” is selected, the images may be distorted.
¢
≥ If “Auto” is selected, the best suited output
resolution to the connected TV is
≥
Not making the proper settings may result in noise.
automatically selected.
¾BD-Video Secondary Audio
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary
audio only.
VQT4V11
24
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Downmix
Network
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output“ is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
∫ Easy Network Setting (> 12)
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾LAN Connection Mode
Select the LAN connection method.
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
¾Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch)
before it is output.
≥ Audio expansion is enabled when you have
selected “PCM” in “Digital Audio Output”.
≥ This does not function on Dolby sound.
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
Language
≥ If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
∫ Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 34) when you select “Other
¢¢¢¢”.
¾IP Address/DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
∫ Subtitle Language
Choose the language for the subtitle.
≥ If “Auto” is selected and the language selected
for “Audio Language” is not available, subtitles
of that language will automatically appear if
available on that disc.
Press [OK] to show the respective setting.
¾Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
≥ Enter a code (> 34) when you select “Other
¢¢¢¢”.
∫ Menu Language
¾Network Service Settings (> 19)
Choose the language for the disc menus.
≥ Enter a code (> 34) when you select “Other
¢¢¢¢”.
Press [OK] to show the following settings:
Time Zone
∫ Subtitle Text
Set the unit’s time to match your location.
≥ Some Network Service contents require the
time zone to be set. Set the time zone if
necessary.
Select a suitable item according to the language
used for MKV subtitles text.
≥
This item is displayed only after playing back a file.
∫ On-screen Language
Choose the language for menus and on-screen messages.
DST
Select “On” when using Daylight Saving time.
VQT4V11
25
Download from Www.Somanuals.com. All Manuals Search And Download.
¾Network Drive Connection
Ratings
The following items use the same password.
Don’t forget your password.
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
website.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
(This site is in English only.)
∫ Network Service Lock
You can restrict the usage of Network Service.
¾Remote Device Settings (> 20)
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If “On” is selected, “Quick Start” will be
activated.
System
∫ Easy Settings
You can execute basic settings.
Setting Unit Name
Set the name of this unit to be displayed on
the connected equipment.
∫ Display Settings
Press [OK] to show the following settings:
¾TV Aspect
Registration Type
Set to match the type of TV connected.
Allow connection to all the
Auto
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
equipment accessing this unit.
Set the permission for
individual equipment
connections accessing this
The sides are cut
off so the picture
Manual
4:3 Pan &
unit.
fills the screen.
Scan
When playing
BD-Video, video is output as “4:3
Letterbox”.
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
Black bands
appear at the top
and bottom of the
picture.
4:3
Letterbox
¾BD-Live Internet Access (> 18)
You can restrict Internet access when BD-Live
functions are used.
≥ If “Allow ( Limited )” is selected, Internet
access is permitted only for BD-Live contents
which have content owner certificates.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio
16:9
image in the center of the
screen.
Video is displayed as a
horizontally stretched 16:9
image.
16:9 Full
VQT4V11
26
Download from Www.Somanuals.com. All Manuals Search And Download.
¾Screen Saver Function
∫ Remote Control Code
This is to prevent image retention on the
screen.
Change the remote control code if other
Panasonic products react to this remote control.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
∫ Firmware Update (> 14)
Press [OK] to show the following settings:
¾Automatic Update Check
≥ While playing and pausing, etc., this function
is not available.
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾Status Messages
Choose whether to show status messages
automatically.
¾Update Now
You can update the firmware manually if a
firmware update is available.
¾HDMI CEC
Set to use “HDMI CEC” function when
connected to a device that supports “HDMI
CEC”.
∫ System Information
Press [OK] to show the following settings:
≥ Select “Off” when you do not want to use
“HDMI CEC”.
¾License
Information about the software used by this unit
is displayed.
∫ Unit Settings
Press [OK] to show the following settings:
¾Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
¾Mixed Data Disc Option
Select the playback contents on discs with both
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, the video
menu function (except MKV) cannot be
played back.
≥ If “BDAV/AVCHD” is selected, data file cannot
be played back.
∫ Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
¾Edit User Information
Change the user information registered in the
HOME menu.
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. (> 15)
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase compared to when set to “Off”. (About
the power consumption > 33)
VQT4V11
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LED indicators
Error states are indicated by the INFO LED.
Confirm the following items in correspondence to the state of INFO LED on the front panel of this unit.
≥ If the state of the INFO LED does not change after performing the operations in the table below,
contact your local Panasonic dealer.
INFO LED
INFO LED state
Description
The remote control and this unit are using different codes.
“Remote control ” is displayed on the screen.
Press and hold [OK] and the displayed number (“”) for at least 5
seconds.
Flashes 6 times
The USB device is drawing too much power. Please disconnect or
remove the USB device from the unit.
Lights up
The USB device may be incompatible.
The following conditions are possible:
≥ The copyright protected disc cannot be played back.
One of the devices connected to this unit (TV, amplifier, etc.) does not
support copyright protection.
≥ Temperature of this unit is hot and the unit switches to standby for
safety reasons.
Flashes
Wait for about 30 minutes.
Select a position with good ventilation when installing the unit.
The disc in use cannot be played back since the copyright information is
invalid.
Flashes 3 times
VQT4V11
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Check the following when messages are
displayed on the screen.
Cannot play.
¾
You inserted an incompatible disc (Discs
recorded in PAL video, etc.).
Cannot display on this unit.
You tried to play a non-compatible image.
¾
No disc inserted.
The disc may be upside down.
¾
$ This operation is not available.
¾
Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾
The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
¾
Set a stronger network security level referring
to the wireless router operating instructions.
VQT4V11
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
General operation
Before requesting service, please perform the
following steps.
To return to the factory preset.
¾
Select “Yes” in “Restore Default Settings” in
the Setup menu. (> 27)
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 14)
4
Make the following checks and visit our
website for more information.
For U.S.A. :
Enter the model number.
For Canada :
To return all settings to the factory preset.
¾
1
2
Reset the unit as follows:
Turn the unit on.
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– INFO LED and POWER LED start to flash,
and “00RET” is displayed on the screen.
Press [1] (right) repeatedly on the remote
control until “08FIN” is displayed on the
screen.
3
4
4
Or visit our website to find a service center.
You can find a service center near you easily
on our website.
Press and hold [OK] for more than 5 seconds.
The remote control does not work properly.
¾
Change the batteries in the remote control.
(> 5)
Other support information:
“Customer Services Directory (United States
and Puerto Rico)” (> 37) or “Limited Warranty
(Only for CANADA)” (> 38).
¾
The remote control and this unit are using
different codes. If “Remote control ” is
displayed on the screen when a button is
pressed on the remote control, change the
code on the remote control. (> 27, 28)
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
The TV tuner mode is not displayed when the
TV is switched on.
¾
This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
∫ Unit does not respond to remote
control or front panel buttons.
¾
Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
Disconnect AC power supply cord, wait 1 minute,
then reconnect AC power supply cord.
∫ Cannot eject disc.
1
Turn the unit on.
You have forgotten your ratings password.
You want to cancel the ratings level.
2
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– INFO LED and POWER LED start to flash,
and “00RET” is displayed on the screen.
Press [1] (right) repeatedly on the remote
control until “06FTO” is displayed on the
screen.
¾
1
2
The ratings level returns to the factory preset.
Turn the unit on.
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– INFO LED and POWER LED start to flash,
and “00RET” is displayed on the screen.
Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the screen.
Press [OK].
3
4
Press [OK].
3
4
VQT4V11
30
Download from Www.Somanuals.com. All Manuals Search And Download.
This unit does not recognize the USB
connection correctly.
Picture
¾
Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
this unit off and on again.
The images from this unit do not appear on
the TV.
Picture is distorted.
¾
USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
¾
An incorrect resolution is selected in “HDMI
Resolution”. Reset the setting as follows:
Turn the unit on.
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– INFO LED and POWER LED start to flash.
Press and hold [8] and the blue button on the
remote control at the same time for more than
5 seconds.
1
2
– a USB extension cable other than the
supplied with the Wireless LAN Adaptor
DY-WL5 (optional)
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
3
Set the item again. (> 24)
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output properly,
select “Yes” in “Restore Default Settings”
and make proper settings. (> 27)
Video is not output in high-definition.
¾
Confirm that “HDMI Resolution” in the Setup
menu is set properly. (> 24)
No subtitles.
When progressive output is on, closed
captions/subtitles cannot be displayed.
¾
The subtitles overlap closed captions
recorded on discs.
¾
Turn off the subtitles or the closed caption
setting on the TV. (> 22)
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾
¾
Confirm the “TV Aspect” is set properly.
(> 26)
Adjust the aspect setting on the TV.
VQT4V11
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio
Network
Cannot hear the desired audio type.
I can’t connect to the network.
¾
Check the connections and the “Digital Audio
Output” settings. (> 10, 24)
¾
Confirm the network connection and settings.
(> 11, 12, 25)
¾
There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 13, “SSID”).
Playback
Disc cannot be played.
¾
Check the operating instructions for each
device and connect accordingly.
¾
¾
The disc is dirty. (> 5)
The disc is not finalized. (> 7)
Cannot play current title.
Still pictures (JPEG) do not play back
normally.
¾
Confirm the network connection and settings.
(> 11, 12, 25)
¾
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
I can’t play back BD-Live.
¾
Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the “Wireless Settings” screen (> 25), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
¾
¾
¾
¾
Confirm that this unit is connected to the
broadband Internet. (> 11)
Connect this unit to the network by a wired
connection.
Confirm the “BD-Live Internet Access”
settings. (> 26)
Confirm a USB device is connected to the
USB port. (> 15)
¾
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 12) again.
VQT4V11
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
File format
General
File format
Extension
Reference
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
Signal system
NTSC
MP3
“.MP3”, “.mp3”
Operating
temperature range
i5 oC to i35 oC
(i41 oF to i95 oF)
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
Operating humidity 10 % to 80 % RH
range
(no condensation)
Output connector:
Type A (19 pin) 1 system
HDMI AV output
USB slot
JPEG
“.JPG”, “.jpg”
USB2.0: 1 system
10BASE-T/100BASE-TX
1 system
Ethernet
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV files may
not play back,
depending on the video
resolution and frame
rate condition.
“.MKV”, “.mkv”
Standard Compliance:
IEEE802.11 b/g/n
Frequency range:
2.4 GHz band
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
[BD89]
Wireless LAN
MKV
Security:
WPATM/WPA2TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
Maximum sampling rate:
192 kHz/24 bit
Class I LASER Product
Wave length: 785 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the
safety protection
FLAC
WAV
“.FLAC”, “.flac”
“.WAV”, “.wav”
Maximum sampling rate:
192 kHz/24 bit
LASER Specification
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/320 kbps
“.M4A”, “.m4a”,
“.AAC”, “.aac”
AAC
Power supply
AC 120 V, 60 Hz
Approx. 11 W
Power consumption
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/355 kbps
Power consumption Approx. 0.5 W
in standby mode
WMA
“.WMA”, “.wma”
Power consumption Approx. 3.5 W
in quick start
standby mode
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Dimensions
Approx. 330 mmk38 mmk179 mm
(WkHkD)
(Approx. 13zk1 1/2zk7 1/16z)
Mass (Weight)
Approx. 1.0 kg (2.2 lbs)
≥ Specifications are subject to change without notice.
VQT4V11
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio information
Display languages list
The audio output differs depending on the
settings on the unit. (> 24, “Digital Audio Output”)
≥ The number of channels listed is the maximum
possible number of output channels when
connected to amplifier/receiver compatible with
the respective audio format.
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English JPN
French CHI
German KOR
Italian MAL
Spanish VIE
Dutch THA
Japanese ARA
Chinese HIN
Korean PER
Malay IND
Vietnamese MRI
Thai BUL
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
Swedish POL
Norwegian CES
Danish SLK
Portuguese HUN
Russian FIN
Polish RUM
Czech GRE
Slovak TUR
Hungarian
“Digital Audio Output”
“PCM”*2*3
Finnish
“Bitstream”
BD-Video :
7.1ch PCM*1
DVD-Video :
5.1ch PCM
Output
channel
Outputs using
original audio*1
Language code list
*1
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital Surround
or 5.1ch PCM.
The maximum possible number of Dolby sound is 2ch PCM.
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch
(2.1ch) audio other than Dolby sound can be expanded to
7ch (7.1ch) and output.
Language Code Language Code Language Code
*2
*3
Abkhazian:
Afar:
Afrikaans:
Albanian:
Amharic:
Arabic:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
6577 Hungarian:
6582 Icelandic:
7185 Rhaeto-Romance:
7265
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
8277
8279
8285
8377
8365
Armenian:
Assamese:
Aymara:
7289 Indonesian: 7378 Scots Gaelic: 7168
Supported format for DLNA
6583 Interlingua:
6589 Irish:
7365 Serbian:
7165 Serbo-Croatian:8372
8382
Azerbaijani: 6590 Italian:
7384 Shona:
7465 Sindhi:
7487 Singhalese: 8373
8378
8368
≥ File formats that are not supported by your
DLNA server cannot be played.
Bashkir:
Basque:
6665 Japanese:
6985 Javanese:
Bengali; Bangla:
Kannada:
Kashmiri:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
8375
8376
8379
6983
Video
6678
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
Video
codec
H.264
H.264
Audio
codec
Dolby Digital
AAC
Dolby Digital
Linear PCM .mpeg
Example of
file extension
.mts
Container
7579 Sundanese: 8385
7585 Swahili:
7679 Swedish:
7665 Tagalog:
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
AVCHD
MP4
Byelorussian: 6669 Latin:
Cambodian: 7577 Latvian, Lettish: 7686 Tajik:
.mp4
.mpg,
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian: 7775 Telugu:
7282 Malagasy:
6783 Malay:
7678 Tamil:
7684 Tatar:
PS
TS
MPEG2
MPEG2,
H.264
AAC
Dolby Digital
.m2ts
.ts
7771 Thai:
7783 Tibetan:
Danish:
Dutch:
6865 Malayalam: 7776 Tigrinya:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
7778 Ukrainian:
7865 Urdu:
Photo
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Format
JPEG
Example of file extension
.jpg
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
7073 Nepali:
7082 Norwegian: 7879 Vietnamese: 8673
7089 Oriya:
7176 Pashto, Pushto:8083 Welsh:
7565 Persian:
6869 Polish:
7869 Uzbek:
Audio
7982 Volapük:
8679
6789
8779
8872
7473
8979
9085
Audio codec
MP3
Example of file extension
7065 Wolof:
8076 Xhosa:
.mp3
.flac
.m4a
.wma
—
FLAC
AAC
WMA
6976 Portuguese: 8084 Yiddish:
Greenlandic: 7576 Punjabi:
Guarani: 7178 Quechua:
8065 Yoruba:
8185 Zulu:
Linear PCM
VQT4V11
34
Download from Www.Somanuals.com. All Manuals Search And Download.
“AVCHD” is a trademark of Panasonic Corporation and Sony
Corporation.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
Java is a registered trademark of Oracle and/or its affiliates.
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under
the GPL V2.0 and/or LGPL V2.1.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents issued &
pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a trademark of
DTS, Inc. Product includes software.
The software categorized as (3) - (5) are distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Player Settings menu.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
At least three (3) years from delivery of this product, Panasonic will
give to any third party who contacts us at the contact information
provided below, for a charge no more than our cost of physically
performing source code distribution, a complete machine-readable
copy of the corresponding source code covered under GPL V2.0,
LGPL V2.1 or the other licenses with the obligation to do so, as
well as the respective copyright notice thereof.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
Contact Information: [email protected]
The source code and the copyright notice are also available for
free in our website below.
Adobe Flash Lite for Digital Home Software licensed by Adobe
Systems Incorporated or its affiliates.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
For Adobe Flash Lite for Digital Home Software (“Flash Software”),
please be aware of the following.
(i) You are not permitted to distribute and copy this Flash
Software to any third party,
(ii) You are not permitted to modify the Flash Software and create
derivative works of the Flash Software,
(iii) You are not permitted to decompile, reverse engineer,
disassemble and otherwise reduce the Flash Software to a
human-perceivable form,
(iv) You are not permitted to claim any damages, including direct,
indirect, special, incidental, punitive, and consequential
damages arising out of or in connection with the Flash
Software,
(v) You fully agree that the ownership of the Flash Software is that
of Panasonic Corporation and/or its suppliers or licensors,
(vi) You agree and acknowledge that it is possible that you cannot
access the contents unless you do not obtain and install the
latest version of the Flash Software.
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or
registered marks of the Wi-Fi Alliance.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
VQT4V11
35
Download from Www.Somanuals.com. All Manuals Search And Download.
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license
from Microsoft or an authorized Microsoft subsidiary and third
parties.
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual
property rights of Microsoft. Use or distribution of this technology
outside of this product is prohibited without the appropriate
license(s) from Microsoft.
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReadyTM content access
technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to
access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on
content usage, content owners may require Microsoft to revoke the
device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content
protected by other content access technologies. Content owners
may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content that
requires the upgrade.
(4) FLAC, WPA Supplicant
The software licenses are displayed when “License” in the Setup
menu is selected. (> 27)
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
VQT4V11
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Marketing Company of North America
(referred to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty period”),
at its option either (a) repair your product with new or refurbished parts, (b)
replace it with a new or a refurbished equivalent value product, or (c) refund
your purchase price. The decision to repair, replace or refund will be made by
the warrantor.
commercial use such as hotel, office, restaurant, or other business or rental use
of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Product or Part Name
Parts
Labor
Blu-ray Disc Player
1 Year
90 Days
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days
10 Days
Not Applicable
Not Applicable
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
Only Non-Rechargeable Batteries
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to:
Panasonic Exchange Center
Customer Services Directory (United States and Puerto Rico)
4900 George McVay Drive
Suite B
Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
McAllen, TX 78503
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
When shipping the unit, carefully pack, include all supplied accessories listed in
the Owner’s Manual, and send it prepaid, adequately insured and packed well in
a carton box. When shipping Lithium Ion batteries please visit our Web Site at
the most up to date information. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached. A
valid registered receipt is required under the Limited Warranty.
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID
AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
Or, send your request by E-mail to:
Limited Warranty Limits And Exclusions
You may also contact us directly at:
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, introduction of sand, humidity or liquids,
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of October 2012
User memo:
DATE OF PURCHASE
DEALER NAME
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
DEALER ADDRESS
TELEPHONE NUMBER
MODEL NUMBER
SERIAL NUMBER
VQT4V11
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded
content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty
gives you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre:
Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
VQT4V11
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida en español
Reproducción básica
(Spanish Quick Reference)
Preparación
Encienda el televisor y seleccione la entrada de
vídeo adecuada en el televisor.
Conexiones básicas
Conexión a un televisor
compatible con HDMI
1 Pulse [Í] para encender la unidad.
Después de conectar su nuevo reprodutor y
pulsar el botón de encendido, aparecerá la
pantalla de la configuración básica.
Cable HDMI
HDMI IN
2 Inserte el medio.
Inicia la reproducción
Pulse [1PLAY].
Conexión a un televisor
compatible con HDMI y a un
amplificador/receptor
compatible con HDMI
Parada
Pulse [∫STOP].
La posición de detención se memoriza.
Función de reanudación de la reproducción
Pulse
desde esta posición.
[1PLAY] para reiniciar la reproducción
Cable HDMI
HDMI IN
(ARC)
≥ La posición se borra si se abre la bandeja.
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
HDMI OUT
HDMI IN
(ARC)
Pausa
Amplificador/
Receptor
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
Conecte el cable de
alimentación de CA por
último
Búsqueda/Cámara lenta
Búsqueda
A una toma de corriente doméstica
Durante la reproducción, pulse [SEARCH6]
o [SEARCH5].
Cámara lenta
Durante la pausa, pulse [SEARCH5].
Cable de alimentación de CA (incluido)
La velocidad aumenta hasta 5 pasos.
≥ Música y MP3, etc.: La velocidad está fija en un paso.
≥ Pulse [1PLAY] para recuperar la velocidad de
reproducción normal.
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de
energía aunque esté ajustada en el modo de
espera (Accionamiento rápido : Desactivado,
aprox. 0,5 W). Para ahorrar energía cuando no
vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
Salto
Durante la reproducción o la pausa, pulse
[:] o [9].
Salta hasta el título, capítulo o pista que desee
reproducir.
VQT4V11
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Changing audio . . . . . .17
Language . . . . . . . .25, 34
B BD-Live . . . . . . . . . . . . . .18
A Audio
W Wireless LAN . . . . . . . . 11
M Media Renderer . . . . . . 20
Multi User Mode. . . . . . . 16
N Network
24p . . . . . . . . . . . . . . . 23, 24
Connection . . . . . . . . . 11
Setting . . . . . . . . . 12, 25
Network Service . . . . . . .19
D DLNA . . . . . . . . . . . . . . . .20
F File format. . . . . . . . . . . .33
Firmware update . . . . . . . 14
H HDMI CEC . . . . . . . . . . . .21
L LAN . . . . . . . . . . . . . . . . .11
P
Pop-up menu . . . . . . . . . .18
Q Quick Start . . . . . . . . . . 27
R Restore Default
Language
Settings . . . . . . . . . . . . . 27
Audio . . . . . . . . . . . . . .25
Menu . . . . . . . . . . . . . .25
On-screen. . . . . . . . . . .25
Soundtrack . . . . . . . . . .22
Subtitle . . . . . . . . . .22, 25
Resume play function . . .17
S Subtitle . . . . . . . . . . . . . 22
U USB device . . . . . . . . . . . 7
USA Only: Disposal may be regulated in your community due to environmental considerations. For
disposal or recycling information, please visit Panasonic website:
or call 1-888-769-0149.
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR® guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
Panasonic Consumer Marketing
Company of North America,
Panasonic Canada Inc.
pr
5770 Ambler Drive,
Division of Panasonic Corporation Mississauga, Ontario L4W 2T3
of North America
One Panasonic Way, Secaucus, New
Jersey 07094
VQT4V11
F1212SA0
C Panasonic Corporation 2012
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|