Panasonic Blu ray Player BDP 140 User Manual

BDP-LX55  
BDP-440  
BDP-140  
Blu-ray 3DTM PLAYER  
For customers in Europe:  
Discover the benefits of registering your product online at  
Download an electronic version of this manual from our website.  
Operating Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
POWER-CORD CAUTION  
To prevent a fire hazard, do not place any naked flame  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power  
cord when your hands are wet as this could cause a  
short circuit or electric shock. Do not place the unit, a  
piece of furniture, etc., on the power cord, or pinch the  
cord. Never make a knot in the cord or tie it with other  
cords. The power cords should be routed such that they  
are not likely to be stepped on. A damaged power cord  
can cause a fire or give you an electrical shock. Check  
the power cord once in a while. When you find it  
damaged, ask your nearest PIONEER authorized  
sources (such as a lighted candle) on the equipment.  
D3-4-2-1-7a_A1_En  
For Taiwan exclusively  
Taiwanese two pin flat-bladed plug  
service center or your dealer for a replacement.  
K056_A1_En  
S002*_A1_En  
Information for users on collection and disposal of old equipment and used batteries  
Symbol for  
equipment  
These symbols on the products, packaging, and/or accompanying documents mean  
that used electrical and electronic products and batteries should not be mixed with  
general household waste.  
For proper treatment, recovery and recycling of old products and used batteries,  
please take them to applicable collection points in accordance with your national  
legislation.  
By disposing of these products and batteries correctly, you will help to save valuable  
resources and prevent any potential negative effects on human health and the  
environment which could otherwise arise from inappropriate waste handling.  
Symbol examples  
for batteries  
For more information about collection and recycling of old products and batteries,  
please contact your local municipality, your waste disposal service or the point of sale  
where you purchased the items.  
These symbols are only valid in the European Union.  
For countries outside the European Union:  
If you wish to discard these items, please contact your local authorities or dealer and  
ask for the correct method of disposal.  
Pb  
K058a_A1_En  
Cautions on 3D Viewing  
If you should experience any fatigue or discomfort while viewing 3D images, stop viewing them.  
Children, particularly those under 6, may be more prone to sensitivity, so guardians should watch for any signs of  
fatigue or discomfort.  
When viewing 3D images, rest periodically.  
%XTENDEDçVIEWINGçOFçꢀ$çIMAGESççWITHOUTçRESTçPERIODSçCOULDçCAUSEçFATIGUEçORçDISCOMFORTꢁ  
3
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Using the FUNCTION menu . . . . . . . . . . . . . . . . . . . . . . 32  
Playing from a specific time (Time Search) . . . . . . . . 32  
Playing a specific title, chapter or track (Search) . . . 32  
Playing specified range of discs, titles or  
01 Before you start  
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Putting the batteries in the remote control. . . . . . . . . . 5  
Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
About operation of this player from a mobile device  
(iPod, iPhone, iPad etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Types of discs/files that can be played. . . . . . . . . . . . . . . 7  
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . 11  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
chapter  
(track/file) in random order . . . . . . . . . . . . . . . . . . . . . 33  
Continuing playback from a specified position  
(Continued Viewing Playback) . . . . . . . . . . . . . . . . . . . 33  
05 Playback from Home Media Gallery  
About Home Media Gallery. . . . . . . . . . . . . . . . . . . . . . . 34  
About network playback . . . . . . . . . . . . . . . . . . . . . . . . 34  
DLNA Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Disc/USB playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Playing back image files. . . . . . . . . . . . . . . . . . . . . . . . 36  
Playing in the desired order (Playlist) . . . . . . . . . . . . . . 36  
Adding tracks/files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Playing the Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Deleting tracks/files from the Playlist . . . . . . . . . . . . . 37  
02 Connecting up  
Connecting using an HDMI cable . . . . . . . . . . . . . . . . . 15  
About HDMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
About Control Function with HDMI. . . . . . . . . . . . . . . 16  
Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting an AV receiver or amplifier . . . . . . . . . . . 18  
Connecting video and audio cables. . . . . . . . . . . . . . . . 20  
Connecting a TV using a video/audio cable . . . . . . . . 20  
Connecting an AV receiver or amplifier using  
06 Playing the web contents  
Available web contents . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Playing the items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
07 Advanced settings  
an optical digital audio cable. . . . . . . . . . . . . . . . . . . . 20  
Connecting components to the USB port . . . . . . . . . . . 20  
About USB memory devices . . . . . . . . . . . . . . . . . . . . 20  
Connecting the USB memory device . . . . . . . . . . . . . 21  
Connecting to the network through LAN interface. . . . 21  
Connecting to a wireless LAN . . . . . . . . . . . . . . . . . . . 22  
Connecting the power cord. . . . . . . . . . . . . . . . . . . . . . . 22  
Changing the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Operating the Initial Setup screen. . . . . . . . . . . . . . . . 39  
Software updating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Restoring all the settings to the factory  
default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Language Code Table and Country/  
Area Code Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
03 Getting Started  
08 Additional information  
Making settings using the Setup Navigator menu . . . . 23  
Operating the TV with the player’s remote control . . . . 24  
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Software license Notice. . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Moving the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Turn the power off when not using the player . . . . . . 54  
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Cleaning the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Caution for when the unit is installed in a rack  
04 Playback  
Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Forward and reverse scanning. . . . . . . . . . . . . . . . . . . 27  
Playing specific chapters or tracks . . . . . . . . . . . . . . . 27  
Skipping content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Playing in slow motion . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Step forward and step reverse . . . . . . . . . . . . . . . . . . . 27  
Playing a specific section within a title or  
with a glass door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Cleaning the pickup lens . . . . . . . . . . . . . . . . . . . . . . . 54  
Handling discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Control function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
track repeatedly (A-B Repeat) . . . . . . . . . . . . . . . . . . . 27  
Playing repeatedly (Repeat Play) . . . . . . . . . . . . . . . . . 27  
Playing in the desired order (Programmed Play) . . . . 28  
Making bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Displaying thumbnail images . . . . . . . . . . . . . . . . . . . 28  
Switching the camera angles . . . . . . . . . . . . . . . . . . . 28  
Switching the subtitles . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Displaying the disc information. . . . . . . . . . . . . . . . . . 29  
Switching the audio and secondary audio . . . . . . . . . 29  
Switching the secondary video . . . . . . . . . . . . . . . . . . 30  
Enjoying BONUSVIEW or BD-LIVE . . . . . . . . . . . . . . . 30  
Playback functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
01  
Before you start  
What’s in the box  
WARNING  
• Do not use or store batteries in direct sunlight or  
other excessively hot place, such as inside a car or  
near a heater. This can cause batteries to leak,  
overheat, explode or catch fire. It can also reduce the  
life or performance of batteries.  
• Remote control x 1  
• Video/audio cable (yellow/white/red plugs) x 1  
• AAA/R03 dry cell batteries x 2  
• Warranty card (European and Russian models only)  
• Power cord  
Caution  
• Operating instructions (this document)  
• Do not use any batteries other than the ones  
specified. Also, do not use a new battery together with  
an old one.  
Putting the batteries in the  
remote control  
• When loading the batteries into the remote control,  
set them in the proper direction, as indicated by the  
polarity marks (and ).  
1
Open the rear cover.  
• Do not heat batteries, disassemble them, or throw  
them into flames or water.  
• Batteries may have different voltages, even if they look  
similar. Do not use different kinds of batteries  
together.  
Press lightly on this  
part and slide into  
the direction of the  
arrow.  
• To prevent leakage of battery fluid, remove the  
batteries if you do not plan to use the remote control  
for a long period of time (1 month or more). If the fluid  
should leak, wipe it carefully off the inside of the case,  
then insert new batteries. If a battery should leak and  
the fluid should get on your skin, flush it off with large  
quantities of water.  
2
Insert the batteries (AAA/R03 x 2).  
Insert as indicated by the /marks into the battery  
compartment.  
• When disposing of used batteries, please comply with  
governmental regulations or environmental public  
institution’s rules that apply in your country/area.  
Insert the negative  
() side first.  
3
Close the rear cover.  
Close securely (a click should be heard).  
The batteries included with the player have been provided  
to allow you to check product operation and may not last  
long. We recommend using alkaline batteries that have a  
longer life.  
5
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Update  
Product information on this player is provided on the  
Pioneer website. Check this website for update and  
service information on your Blu-ray disc player.  
01  
IN Europe:  
IN U.K.:  
IN Russia:  
IN Hong Kong:  
IN Singapore:  
IN Australia  
About operation of  
this player from a  
mobile device (iPod,  
iPhone, iPad etc.)  
The player can be controlled from a mobile device by  
installing the special application onto the mobile device.  
For details, see the product information on the Pioneer  
website.  
This special application may be changed or discontinued  
without notice.  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of discs/files that can be played  
01  
Playable discs  
Discs with the logo marks below indicated on the disc label, package or jacket can be played.  
Caution  
• Only the discs that have been finalized can be played.  
Application format  
Disc type  
Logo  
DATA-  
DISC1  
CD-DA  
DTS-CD  
DVD-  
DVD-  
BDMV  
BDAV  
DVD VR  
Video  
Audio  
BD-ROM  
BD-R  
2
BD  
BD-RE  
3
DVD-ROM  
DVD  
2,4,5  
6
7
DVD-R  
4,8  
6
7
DVD-RW  
2,4  
DVD+R  
4
DVD+RW  
CD-DA  
9
(Audio CD)  
CD  
4
CD-R  
4
CD-RW  
CD-ROM  
1. Discs on which video, image or audio files are recorded. This player does not support multisession discs or multiborder recording.  
2. Including dual-layered discs.  
3. BDP-LX55 and BDP-440 only.  
4. Finalize them before playing them on this player.  
5. DVD-R for Authoring discs (3.95 and 4.7 GB) cannot be played.  
6. Including the AVCHD format.  
7. Including the AVCREC format.  
8. Version 1.0 DVD-RW discs cannot be played.  
9. Including Video CDs.  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are  
trademarks of Blu-ray Disc Association.  
Playing BDs  
• BDs (BDMV) compatible with the formats below can  
be played.  
01  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
– Blu-ray Disc Read-Only (ROM) Format Version 2  
– Blu-ray Disc Recordable (R) Format Version 2  
– Blu-ray Disc Rewritable (RE) Format Version 3  
• Corporation and product names mentioned herein are  
trademarks or registered trademarks of the respective  
corporations.  
This player supports BD-ROM Profile 5.  
Discs that cannot be played  
• HD DVDs  
• DVD-RAM discs  
It is possible that some discs other than the ones listed  
above may not be playable either.  
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of  
Blu-ray Disc Association.  
Note  
BONUSVIEW functions such as playback of  
secondary video (Picture-in-Picture) and secondary  
audio can be used. The data used with the  
BONUSVIEW functions (the secondary video  
(Picture-in-Picture) and secondary audio data) may  
be stored in the storage. For details on secondary  
video and secondary audio playback, refer to the  
disc’s instructions.  
• Some discs cannot be played, even if one of the logo  
marks on the previous page is indicated.  
• To play 8 cm discs, set the disc in the 8 cm disc  
depression in the center of the disc tray. No adapter  
is necessary. 8 cm BD-ROMs cannot be played.  
About audio formats  
The following audio formats are supported on this player:  
• Dolby TrueHD  
“BONUSVIEW” is trademark of Blu-ray Disc  
Association.  
• Dolby Digital Plus  
• Dolby Digital  
BD-LIVE functions such as downloading movie  
trailers or additional audio and subtitle languages  
and playing on-line games can be enjoyed over the  
Internet. The data downloaded with the BD-LIVE  
function (trailers, etc.) is stored in the storage. Refer  
to the disc’s instructions for details about BD-LIVE  
functions.  
• DTS-HD Master Audio  
• DTS-HD High Resolution Audio  
• DTS Digital Surround  
• MPEG audio (AAC)  
• Linear PCM  
To enjoy the surround sound of Dolby TrueHD, Dolby  
Digital Plus, DTS-HD Master Audio and DTS-HD High  
Resolution Audio, it is recommended to connect the  
player to an AV receiver or amplifier compatible with  
these audio formats using an HDMI cable. After loading  
a BD containing sound in one of these audio formats,  
select the audio format on the menu screen.  
“BD-LIVE” logo is trademark of Blu-ray Disc  
Association.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
Manufactured under license under U.S. Patent Nos:  
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195;  
7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide  
patents issued & pending. DTS-HD, the Symbol, & DTS-HD  
and the Symbol together are registered trademarks & DTS-  
HD Master Audio | Essential is a trademark of DTS, Inc.  
Product includes software. © DTS, Inc. All Rights Reserved.  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
With BD-ROMs, it is possible to use BD-J (Java)  
applications to create highly interactive titles, for  
example including games.  
About region numbers  
Blu-ray Disc Player and BD-ROM or DVD-Video discs are  
assigned region numbers according to the region in  
which they are sold.  
01  
This player’s region numbers are:  
• BD-ROM:  
Europe, Australia and New Zealand models: B  
Russia models: C  
Others: A  
• DVD-Video:  
Europe models: 2  
Australia and New Zealand models: 4  
Russia models: 5  
Oracle and Java are registered trademarks of Oracle  
and/or its affiliates. Other names may be trademarks of  
their respective owners.  
Others: 3  
• BDs (BDAV) compatible with the formats below can  
be played.  
Discs not including these numbers cannot be played.  
Discs playable on this player are as shown below.  
– Blu-ray Disc Recordable (R) Format Version 1  
– Blu-ray Disc Rewritable (RE) Format Version 2  
• BDs:  
Europe, Australia and New Zealand models: B  
(including B) and ALL  
Playing DVDs  
Russia models: C (including C) and ALL  
Others: A (including A) and ALL  
• DVDs:  
U.K. models: 2 (including 2) and ALL  
This label indicates playback compatibility with DVD-RW  
discs recorded in VR format (Video Recording format).  
However, for discs recorded with a record-only-once  
encrypted program, playback can only be achieved using a  
CPRM compatible device.  
Australia and New Zealand models: 4 (including 4)  
and ALL  
Russia models: 5 (including 5) and ALL  
Others: 3 (including 3) and ALL  
The AVCHD is a high definition (HD) digital video camera  
recorder format recording high-definition onto certain  
media by using highly efficient codec technologies.  
Playing CDs  
Regarding copy protected CDs: This player is designed to  
conform to the specifications of the Audio CD format.  
This player does not support the playback or function of  
discs that do not conform to these specifications.  
“AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
DualDisc playback  
A DualDisc is a two-sided disc, one side of which  
contains DVD content — video, audio, etc. — while the  
other side contains non-DVD content such as digital  
audio material.  
The DVD side of a DualDisc can be played on this player.  
The non-DVD, audio side of the disc is not compatible  
with this player.  
It is possible that when loading or ejecting a DualDisc,  
the opposite side to that being played will be scratched.  
Scratched discs may not be playable.  
For more detailed information on the DualDisc  
specification, please refer to the disc manufacturer or  
disc retailer.  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs created on computers Supported video file formats  
01  
• DivX Plus HD  
or BD/DVD recorders  
®
®
DivX Certified to play DivX and DivX PlusTM HD  
(H.264/MKV) video up to 1080p HD including  
premium content.  
• It may not be possible to play discs recorded using a  
computer due to the application settings or  
computer’s environment settings. Record discs in a  
format playable on this player. For details, contact the  
dealer.  
®
ABOUT DIVX VIDEO: DivX is a digital video format  
®
created by DivX, Inc. This is an official DivX Certified  
device that plays DivX video. Visit divx.com for more  
information and software tools to convert your files  
into DivX video.  
• It may not be possible to play discs recorded using a  
computer or a BD/DVD recorder, if burn quality is not  
good due to characteristics of the disc, scratches, dirt  
on the disc, dirt on the recorder’s lens, etc.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
About video, audio, and image files  
and folders  
Audio and image files can be played on this player when  
the folders on the disc or USB memory device are created  
as described below.  
®
Certified device must be registered in order to play  
purchased DivX Video-on-Demand (VOD) movies. To  
obtain your registration code, locate the DivX VOD  
section in your device setup menu. Go to  
vod.divx.com for more information on how to  
complete your registration.  
Example of folder structure:  
Root  
*
001.jpg/001.mp3  
xxx.jpg/xxx.mp3  
®
®
DivX , DivX Certified , DivX PlusTM HD and associated  
logos are trademarks of DivX, Inc. and are used under  
license.  
*
001.jpg/001.mp3  
xxx.jpg/xxx.mp3  
01 Folder  
Folder  
001.jpg/001.mp3  
Note  
xxx.jpg/xxx.mp3  
001.jpg/001.mp3  
*
*
®
• This DivX Certified device must be registered in  
XX Folder  
order to play DivX Video-on-Demand (VOD) content.  
First generate the DivX VOD registration code for your  
device and submit it during the registration process.  
Important: DivX VOD content is protected by a DivX  
DRM (Digital Rights Management) system that  
restricts playback to registered DivX Certified devices.  
If you try to play DivX VOD content not authorized for  
your device, the message Authorization Error will be  
displayed and your content will not be played. Learn  
xxx.jpg/xxx.mp3  
* The number of folders and files within a single folder  
(including the root directory) is limited to a maximum of  
256. Also, keep the number of folder layers to a maximum  
of 5.  
Note  
– This player’s DivX VOD registration code can be  
checked at HOME MENU Initial Setup   
Playback DivX(R) VOD DRM Registration  
Code (page 42).  
• The file and folder names displayed on this player may  
differ from those displayed on a computer.  
Playable files  
Video, image and audio files recorded on DVDs and CDs  
can be played.  
– The number of views is restricted for some DivX  
VOD files. When such files are played on this  
player, the remaining number of views is displayed.  
Files for which the remaining number of views has  
reached 0 cannot be played (This DivX rental has  
expired is displayed). Files for which the number of  
views is not restricted can be played as many times  
as you like (the remaining number of views is not  
displayed).  
Caution  
• In DVD, only the one recorded by the ISO 9660 file  
system can be played.  
• Some files may not be playable.  
• For some files, it may not be possible to use certain  
functions during playback.  
• It may not be possible to play some files, even if they  
have the extension of a file playable on this player.  
• Files protected by DRM (Digital Rights Management)  
cannot be played (not including DivX VOD files).  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MKV  
MKV files can be played.  
Part Names and  
Functions  
01  
– MKV is a file format allowing multiple audio and  
video files to be held in a single file.  
– The files that can be played are as follows:  
Resolution: Up to 1 280 x 720  
Extension: “.mkv” or “.MKV”  
Remote Control  
19  
20  
• Windows Media™ Video (WMV)  
1
2
Windows Media™ Video (WMV) files can be played.  
– The files that can be played are as follows:  
Resolution: Up to 1 280 x 720  
Extension: “wmv” or “WMV”  
21  
3
– Files encoded using the Windows Media™ Encoder  
9 series are supported.  
– Windows Media is either a registered trademark or  
trademark of Microsoft Corporation in the United  
States and/or other countries.  
22  
23  
4
5
24  
25  
– This product includes technology owned by  
Microsoft Corporation and cannot be used or  
distributed without a license from Microsoft  
Licensing, Inc.  
6
7
8
26  
Supported image file formats  
• JPEG  
9
• Progressive JPEG  
File format: JFIF Ver. 1.02/Exif Ver. 2.2  
10  
27  
Resolution: Up to 4 096 x 4 096 pixels  
28  
29  
Supported audio file formats  
Windows Media™ Audio 9 (WMA9)  
Bit rate: Up to 192 kbps  
11  
12  
13  
14  
30  
31  
32  
Sampling frequencies: 22.05 kHz, 32 kHz, 44.1 kHz  
and 48 kHz  
15  
33  
MPEG-1 Audio Layer 3 (MP3)  
Bit rate: Up to 320 kbps  
Sampling frequencies: 8 kHz, 11.025 kHz, 12 kHz,  
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz  
34  
35  
36  
16  
37  
38  
17  
18  
Free Lossless Audio Codec (FLAC) (Only for BDP-  
LX55)  
Sampling frequencies: 96 kHz to 192 kHz  
Quantization bitrate: 16 bit, 24 bit  
Channel: 2ch  
Playable file extensions  
Video files  
1
2
STANDBY/ON – Press to turn the power on and  
off.  
.divx, .mkv, .wmv and .avi  
CONTINUED – Use to continue playback from a  
specified position. (page 33)  
Image files  
.jpg and .jpeg  
3
4
TV CONTROL – (page 24)  
Audio files  
.wma and .mp3  
.flac (BDP-LX55 only)  
AUDIO – (page 29)  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
FL DIMMER  
24 HDMI  
BDP-LX55 – Use to switch HDMI Mode alternately  
01  
BDP-LX55, BDP-440 – Each time this is pressed, the  
brightness of the front panel display changes and/or  
the lighting status of the indicators on the front panel  
switches as shown in the table below.  
(pages 16 and 41).  
BDP-440/BDP-140 – Use to switch the resolution of  
the video signals output from the HDMI OUT terminal  
(page 41).  
Indicators  
Front panel  
display  
Blu-ray  
PQLS  
FL OFF  
25 EXIT – (page 38)  
(BDP-LX55 only)  
26 POP UP MENU/MENU – Press to display the  
Bright  
Middle  
Dark  
Off  
Lights  
Lights  
Lights  
Off  
Lights  
Lights  
Lights  
Off  
Off  
BD-ROM or DVD-Video menus.  
Off  
27  
RETURN – Press to return to the previous  
screen.  
Off  
Lights  
28 Color buttons – Use these to navigate BD-ROM  
BDP-140 – Each time this is pressed, the brightness  
of the front panel display switches (in 4 levels).  
menus.  
PROGRAM – (page 28)  
CD/SACD  
BOOK MARK – (page 28)  
ZOOM – (page 28)  
For hybrid discs, press to switch between the CD and  
SACD layers.  
INDEX – (page 28)  
6
TOP MENU – Press to display the top menu of the BD-  
ROM or DVD-Video.  
29 FWD – (page 27)  
7
8
9
FUNCTION – (page 32)  
30  
//– (page 27)  
HOME MEDIA GALLERY – (page 34)  
31 STOP – (page 26)  
32 2nd VIDEO – (page 30)  
33 2nd AUDIO – (page 29)  
34 A-B – (page 27)  
///– Use to select items, change settings  
and move the cursor.  
ENTER – Press to execute the selected item or enter a  
setting that has been changed, etc.  
10  
HOME MENU – (page 39)  
35 ENTER – Press to execute the selected item or enter a  
setting that has been changed, etc.  
11 REV – (page 27)  
12 PLAY – (page 26)  
13 // – (page 27)  
14 PAUSE – (page 26)  
36 REPEAT – (page 27)  
37 SKIP SEARCH – Press to skip 30 seconds ahead when  
SKIP SEARCH is pressed during playback.  
38 REPLAY – Press to jump back 10 seconds when  
15 Number buttons – Use these to select and play the  
title/chapter/track you want to view or listen to and to  
select items from menus.  
REPLAY is pressed during playback.  
Keylock function  
You can set the keylock to prevent accidental operations.  
16 CLEAR – Press to clear the numeric number, etc.  
17 DISPLAY – (page 29)  
This function allows TVs compatible with control function  
with HDMI to also perform a Key Lock on the player.  
18 KEYLOCK – (page 12)  
Press and hold KEYLOCK for more than 2 seconds.  
• Each time you perform this operation, the function is  
activated or deactivated.  
19 Remote control LED – Lights when a command is  
sent from the remote control. Flashes while the TV  
band code is being set.  
• If you try to operate the player while the keylock  
function is set, LOCK lights on the front panel display.  
20 OPEN/CLOSE – Press to open and close the disc  
tray.  
Note  
21 RECEIVER CONTROL  
22 SUBTITLE – (page 29)  
23 ANGLE – (page 28)  
• This remote control unit is equipped with two ENTER  
buttons (9 and 35 listed above).  
• To operate an AV receiver equipped with a remote  
control mode setting using the RECEIVER CONTROL  
buttons, set the AV receiver’s remote control mode to  
“1”. For details, see the AV receiver’s operating  
instructions.  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
01  
BDP-LX55  
1
2
3
4
5
6
7
8
9
10  
11  
BDP-440  
1
2
3
4
6
7
8
9
10  
11  
BDP-140  
1
3
4
6
8
9
10  
11  
1
2
STANDBY/ON – Press to turn the power on and  
off.  
7
8
9
PQLS indicator (BDP-LX55 and BDP-440 only) –  
(page 17)  
FL OFF indicator (BDP-LX55 and BDP-440 only) –  
(page 12)  
OPEN/CLOSE – Press to open and close the disc  
tray.  
3
4
5
6
Disc tray  
– Press to stop playback.  
Front panel display  
10 USB port – (page 20)  
Blu-ray indicator (BDP-LX55 only) – (page 12)  
11 – Press to start playback.  
Remote control sensor – Point the remote control to  
this, then operate it within approximately 7 m.  
The player may have trouble capturing remote control  
signals if there is a fluorescent light nearby. If this  
happens, move the player away from the fluorescent  
light.  
13  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
01  
BDP-LX55  
1
2
3
4
5
6
7
8
BDP-440  
1
2
3
4
5
6
8
BDP-140  
3
4
2
1
5
6
8
1
2
3
4
HDMI OUT terminal(s) – (below and page 15)  
VIDEO OUTPUT terminals – (page 20)  
5
6
7
LAN (10/100) terminal – (page 21)  
USB port – (page 20)  
DIGITAL OUT (OPTICAL) terminal – (page 20)  
AUDIO OUTPUT terminals – (page 20)  
RS-232C terminal (BDP-LX55 only) – This terminal is  
not used.  
8
AC IN – (page 22)  
About the HDMI terminals on the BDP-LX55  
MAIN – Connect with an HDMI-compatible TV or/and AV receiver or amplifier. This is the terminal that is used mainly.  
SUB – Connect with an HDMI compatible AV receiver or amplifier. This terminal is only for outputting audio signals.  
Note  
• No video signal can be output through the SUB terminal. Make sure to connect your TV to the MAIN terminal.  
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
02  
Connecting up  
Be sure to turn off the power and unplug the power cord  
from the power outlet whenever making or changing  
connections.  
This product is compatible with “x.v.Color” that have the  
capability to realize a wide-gamut color space based on  
the xvYCC specifications.  
Playing video signals conforming to “xvYCC” standards  
on this player when this player is connected to an  
“x.v.Color”-compatible TV, etc., expands color  
reproduction capabilities, allowing natural colors to be  
reproduced more faithfully than ever.  
“x.v.Color” is a promotion name given to the products that  
have the capability to realize a wide-gamut color space  
based on the international standard specifications  
defined as xvYCC.  
After connecting, make the settings at the Setup  
Navigator or Initial Setup menu according to the type of  
cable connected (page 23).  
Also refer to the operating instructions for the device  
being connected.  
Note  
• The illustrations used here are mainly of the BDP-  
LX55.  
Connecting using an  
HDMI cable  
The audio and video signals can be transferred to HDMI-  
compatible devices as digital signals with no loss of  
sound or video quality.  
“x.v.Color” and  
Corporation.  
are trademarks of Sony  
Playable audio signals through the  
HDMI OUT terminal  
• Dolby TrueHD  
Note  
• For the BDP-LX55, make the HDMI Mode setting at  
the Initial Setup menu according to the connection  
of the devices to the player (pages 16 and 41).  
• Dolby Digital Plus  
• Dolby Digital  
• DTS-HD Master Audio  
• DTS-HD High Resolution Audio  
• DTS Digital Surround  
• MPEG-2 AAC  
• Make the settings at the Setup Navigator menu  
according to the connected HDMI-compatible device  
(page 23).  
• 1080p video signals may not be output, depending on  
the HDMI cable being used.  
• Linear PCM  
Linear PCM audio signals meeting the following  
conditions can be output:  
About HDMI  
This player incorporates the High-Definition Multimedia  
Interface (HDMI®) technology.  
– Sampling frequency: 32 kHz to 192 kHz  
– Number of channels: Up to 8 (up to 6 for a 192 kHz  
sampling frequency)  
When connected to a DVI device  
It is not possible to connect DVI devices  
(computer displays, for example) that are not  
compatible with HDCP. HDCP is a specification to  
protect audiovisual content across the DVI/HDMI  
interface.  
HDMI, the HDMI Logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing, LLC in the United States and other countries.  
• No audio signals are output. Connect using an audio  
cable, etc.  
The player supports Deep Color.  
• This player is designed for connection with HDMI-  
compatible devices. When connected to a DVI device,  
it may not operate properly depending on the DVI  
device.  
The conventional players can transmit a video signal with  
8 bit color depth in the YCbCr 4:4:4 or RGB format; the  
players supporting Deep Color can transmit a video  
signal with a color bit depth of greater than 8 bits per  
color component. Subtle color gradations can be  
reproduced when this player is connected to a TV that  
supports Deep Color.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The power of the Flat Screen TV and the player  
turns on and off automatically. (Simultaneous  
power function)  
About Control Function with  
HDMI  
The functions work when a control function with HDMI-  
compatible Pioneer Flat Screen TV or AV system (AV  
receiver or amplifier, etc.) is connected to the player using  
an HDMI cable.  
02  
When playback on the player is started or the HOME  
MENU is displayed, if the Flat Screen TV’s power was  
off, its power turns on automatically. When the Flat  
Screen TV’s power is turned off, the player’s power  
automatically turns off.  
Also refer to the operating instructions for the Flat Screen  
TV and AV system (AV receiver or amplifier, etc.).  
Setting the HDMI Mode (Only for  
BDP-LX55)  
To use the control function with  
The BDP-LX55 has two HDMI OUT (MAIN, SUB)  
terminals. See page 14 for the details on these terminals.  
HDMI  
• The control function with HDMI operates when  
control function with HDMI is set to On for all devices  
connected with HDMI cables.  
The HDMI Mode needs to be selected before playback to  
use the control function appropriately.  
To make the setting, press HOME MENU to display the  
Home Menu, select Initial Setup Audio Output   
HDMI Mode.  
• Once the connections and the settings of all the  
devices are finished, be sure to check that the player’s  
picture is output to the Flat Screen TV. (Also check  
after changing the connected devices and  
See the table below and set up the HDMI Mode  
reconnecting HDMI cables.) The control function with  
HDMI may not operate properly if the player’s picture  
is not properly output to the Flat Screen TV.  
• Use High Speed HDMI® Cables when using the  
control function with HDMI. The control function with  
HDMI may not operate properly if other HDMI cables  
are used.  
according to your connection style.  
HDMI OUT MAIN  
HDMI OUT SUB  
HDMI  
Mode  
Video Audio Control Video Audio Control  
Single  
Separate  
Pure  
Audio  
• For some models, the control function with HDMI  
may be referred to as “KURO LINK” or “HDMI  
Control”.  
Caution  
• The control function with HDMI does not work with  
devices of other brands, even if this player is  
connected with an HDMI cable.  
• No video signal is output through the SUB terminal.  
This terminal is only for audio signals.  
Sound Retriever Link  
About Sound Retriever Link  
What the control function with  
HDMI can do  
• Outputting the optimum picture quality to a Flat  
Screen TV compatible with the control function  
with HDMI.  
Sound Retriever Link is a sound quality correction control  
technology that automatically adjusts the compressed  
sound quality for the connected AV receiver using HDMI  
control function.  
Sound Retriever Link function allows you to enjoy higher  
quality audio by setting the connected AV receiver’s  
Sound Retriever function automatically.  
When the control function with HDMI is enabled,  
video signals with the optimum picture quality for  
control function with HDMI are output from the  
player’s HDMI terminal.  
Sound Retriever Link function on this player works  
exclusively with the following situations.  
• Operating the player with the Flat Screen TV’s  
remote control.  
• PC Audio Stream that is played by USB devices or via  
network.  
Such player operations as starting and stopping  
playback and displaying the menus can be performed  
from the Flat Screen TV.  
• The Pioneer AV receiver compatible with Sound  
Retriever Link function is connected to this player  
through an HDMI cable and the player’s setting is set  
as shown below (page 41).  
• The player’s playback picture is displayed on the  
Flat Screen TV’s screen. (Auto-select function)  
Control: On  
The input switches automatically on the Flat Screen  
TV and AV system (AV receiver or amplifier, etc.) when  
playback is started on the player or the HOME MENU  
is displayed. When the input is switched, the playback  
picture, the HOME MENU appears on the Flat Screen  
TV.  
• Also refer to the instructions of the AV receiver.  
• See Pioneer website about AV receivers compatible  
with Sound Retriever Link function.  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the PQLS function (Only for  
BDP-LX55 and BDP-440)  
Caution  
02  
• Connect the player directly to the Pioneer AV receiver  
compatible with Sound Retriever Link function.  
Interrupting a direct connection with an amplifier or  
AV converter (such as an HDMI switch) can cause  
malfunction.  
PQLS (Precision Quartz Lock System) is a digital audio  
transfer control technology using the HDMI control  
function. The player’s output signals are controlled from  
the AV receiver to achieve high sound quality playback  
using the receiver’s quartz oscillator. This eliminates the  
influence of the jitter generated during signal transfer  
which can adversely affect the sound quality.  
Stream Smoother (only for the BDP-  
LX55)  
Stream Smoother is a function that automatically  
improves picture quality when playing network video  
contents by using a built-in high picture quality circuit to  
reduce mosquito noise, block noise, etc.  
• This player supports the functions below.  
– The “PQLS 2ch Audio” function that is only  
activated when playing music CDs (CD-DAs)  
– The “PQLS Multi Surround” function that is  
activated when playing all discs (BDs, DVDs, etc.)  
with linear PCM audio output  
Note  
– The “PQLS Bitstream” function that is activated  
when playing with bitstream audio output  
• On the BDP-LX55, this function is activated even  
when no AV receiver is connected.  
• The various PQLS functions are activated when a  
Pioneer AV receiver supporting the PQLS functions is  
connected directly to the HDMI OUT terminal with an  
HDMI cable and the player’s settings are set as  
shown below (page 41).  
Stream Smoother Link (Only for  
BDP-440 and BDP-140)  
About Stream Smoother Link  
Control: On  
Stream Smoother Link is a function that improves picture  
quality of network video contents using the control  
function with HDMI. Stream Smoother Link function  
allows you to enjoy a high quality picture with less noise  
by setting the connected AV receiver’s Stream Smoother  
function automatically.  
• Also refer to the AV receiver’s operating instructions.  
• See the Pioneer website for AV receivers supporting  
the PQLS function.  
Caution  
Stream Smoother Link function on this player works  
exclusively with the following situations.  
• The PQLS function may stop working when the video  
output resolution is switched. The PQLS function will  
start working again once playback is stopped then  
restarted.  
• Playback of PC contents stored on discs and USB  
devices.  
• The Pioneer AV receiver with Stream Smoother Link  
function is connected to this player through an HDMI  
cable.and the player’s setting is set as shown below  
(page 41).  
• When the PQLS 2ch function is activated, the output  
from the player’s VIDEO OUTPUT jacks may not have  
the proper colors. If this happens, connect the TV and  
AV receiver’s HDMI terminals to view the picture.  
Control: On  
• Turn on the power of the AV receiver connected to the  
HDMI OUT terminal, then start playback of the disc.  
• Also refer to the instructions for the AV receiver.  
• See Pioneer website about AV receivers compatible  
with Stream Smoother Link function.  
Note  
• PQLS indicator on the player’s front panel display  
lights when the PQLS function is activated (page 13).  
Caution  
• Connect the player directly to the Pioneer AV receiver  
compatible with Stream smoother Link function.  
Interrupting a direct connection with an amplifier or  
AV converter (such as HDMI switch) can cause  
malfunction.  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BDP-440/BDP-140  
Connecting a TV  
See Connecting an AV receiver or amplifier on the right  
column to connect an AV receiver or amplifier using an  
HDMI cable.  
02  
BDP-440’s rear panel  
Caution  
• Hold the plug when connecting and disconnecting  
the cable.  
• Placing a load on the plug could result in faulty  
contact and no video signals being output.  
Match the direction of  
the plug to the terminal  
and insert straight.  
BDP-LX55  
Connect a TV to the HDMI OUT (MAIN) terminal.  
To HDMI  
input terminal  
It is also possible to connect to an  
AV receiver or amplifier using an  
HDMI cable (below).  
BDP-LX55’s rear panel  
Direction of signal flow  
TV  
Connecting an AV receiver or  
amplifier  
Connect to an AV receiver or amplifier in order to enjoy  
the surround sound of Dolby TrueHD, Dolby Digital Plus,  
Dolby Digital, DTS-HD Master Audio, DTS-HD High  
Resolution Audio or DTS Digital Surround. For  
instructions on connecting the TV and speakers to the AV  
receiver or amplifier, refer to the operating instructions  
for AV receiver or amplifier.  
Match the direction of  
the plug to the terminal  
and insert straight.  
To HDMI  
input terminal  
It is also possible to connect to an  
AV receiver or amplifier using an  
HDMI cable (on the right column).  
Direction of signal flow  
TV  
Caution  
• Hold the plug when connecting and disconnecting  
the cable.  
It is also possible to connect a TV via AV reciever or  
amplifier to HDMI OUT (MAIN) terminal. See Connecting  
an AV receiver or amplifier on the right column.  
• Placing a load on the plug could result in faulty  
contact and no video signals being output.  
Caution  
• Make sure to connect a TV to HDMI OUT (MAIN)  
terminal, video signals cannot be output from HDMI  
OUT (SUB) terminal.  
• Make sure to set HDMI Mode to Single (page 41).  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BDP-LX55  
Caution  
02  
BDP-LX55’s rear panel  
• Make sure to connect a TV to HDMI OUT (MAIN)  
terminal, video signals cannot be output from HDMI  
OUT (SUB) terminal.  
• Make sure to set HDMI Mode to Separate (page 41).  
• If the AV amplifier connected to the HDMI OUT (SUB)  
terminal is also connected to a TV, the TV’s input may  
switch automatically. If this happens, turn off the  
control function with HDMI on the TV.  
HDMI cable  
(commercially available)  
BDP-440/BDP-140  
AV receiver  
or amplifier  
BDP-440’s rear panel  
Match the  
directionofthe  
plug to the  
terminal and  
insert straight.  
AV receiver  
or amplifier  
From HDMI output  
terminal to HDMI input  
terminal  
HDMI cable  
(commercially  
available)  
Match the direction  
of the plug to the  
terminal and insert  
To HDMI  
input terminal  
straight.  
Direction of signal flow  
AV receiver  
or amplifier  
TV  
Achieving better video and sound quality  
From HDMI  
To HDMI input  
terminal  
When connecting one TV (or projector) and AV amplifier  
to the player, connect in such a way that the video and  
audio signals are transferred separately in order to  
achieve higher quality video and sound.  
output  
TV  
terminal  
Direction of signal flow  
BDP-LX55’s rear panel  
HDMI cable  
(commercially available)  
AV receiver  
or amplifier  
Match the  
directionofthe  
plug to the  
terminal and  
insert straight.  
Direction of signal flow  
TV  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting an AV receiver or  
amplifier using an optical  
digital audio cable  
Connecting video and  
audio cables  
02  
Note  
BDP-LX55’s rear panel  
• Make the settings in the Setup Navigator menu  
according to the type of cable connected (page 23).  
• To output video signals from this player, connect  
using a video cable (not including when connected  
using an HDMI cable).  
Red  
White  
Connecting a TV using a  
video/audio cable  
Video/audio cable  
(included)  
Optical digital audio  
cable (commercially  
available)  
2-channel analog  
audio can also be  
connected.  
Caution  
Connect the player’s video output directly to  
your TV.  
To optical digital  
audio input terminal  
To audio input terminals  
AV receiver or  
amplifier  
This player supports the analog copy protection  
technology. Therefore, the picture may not be  
displayed properly if this player is connected to a TV  
via a DVD recorder/video deck or when playing the  
player’s output material that is recorded by a DVD  
recorder/video deck. Furthermore, the picture may  
not be displayed properly due to the copy protection  
when the player is connected to a TV with a built-in  
video deck. For details, contact the manufacturer of  
your TV.  
Direction of signal flow  
Note  
• To switch the video from the AV receiver or amplifier,  
also connect the video output terminals.  
Connectingcomponents  
to the USB port  
The data downloaded with the BD-LIVE function and the  
data used with the BONUSVIEW function when playing  
BD-ROMs can be stored on a device connected to the  
USB port (USB memory).  
BDP-LX55’s rear panel  
Yellow  
Red  
White  
About USB memory devices  
The USB memory devices that can be connected to the  
player are as shown below.  
It is also possible to connect to  
an AV receiver or amplifier.  
Connect the audio signals using  
an optical digital audio cable or  
an audio cable (2 channels) (on  
the right column).  
• USB 2.0-compatible memory devices  
• FAT16 or FAT32 file system, minimum 1 GB capacity  
(2 GB or more recommended)  
Direction of  
signal flow  
To video/audio input terminals  
Note  
• Devices formatted with a file system other than the  
above cannot be used. Such devices may however be  
usable if they are formatted from the player.  
TV  
• USB memory devices may not be recognized if they  
contain multiple partitions.  
Note  
• Some USB memory devices may not operate with this  
player.  
• Video signals are output with a resolution of 480/576I  
or 480/576P when this player is connected using a  
video cable.  
• Operation of USB memory devices is not guaranteed.  
• Depending on the output video resolution setting, the  
picture may not be output.  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the USB memory  
device  
Connecting to the  
network through LAN  
interface  
By connecting this player to the network via the LAN  
terminal, you can play audio files stored on the  
components on the network, including your computer,  
using HOME MEDIA GALLERY inputs.  
02  
Caution  
• Be sure to turn the player’s power off before  
connecting or disconnecting USB memory devices.  
• Use empty USB memory devices (on which nothing is  
stored).  
• If the USB memory device is write-protected, be sure  
to disable the write-protection.  
BDP-LX55’s rear panel  
• Placing excessive loads on the plug may result in  
poor contact, making it impossible to write data on  
the USB memory device.  
Internet  
• When a USB memory device is connected and the  
player’s power is turned on, do not unplug the power  
cord.  
• USB external hard disks cannot be connected to the  
player.  
LAN cable  
(commercially  
available)  
Modem  
Player’s front panel  
Router  
LAN  
3
2
1
WAN  
PC  
USB memory device  
LAN cable  
(commercially available)  
BDP-LX55’s rear panel  
Connect the LAN terminal on this receiver to the LAN  
terminal on your router (with or without the built-in DHCP  
server function) with a straight LAN cable (CAT 5 or  
higher).  
Turn on the DHCP server function of your router. In case  
your router does not have the built-in DHCP server  
function, it is necessary to set up the network manually.  
For details, see Setting the IP address on page 44 .  
USB memory device  
LAN terminal specifications  
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)  
Note  
Note  
• Devices may not work if connected to the USB port via  
a memory card reader or USB hub.  
• Refer to the operation manual of the equipment you  
have as the connected equipment and connection  
method may differ depending on your Internet  
environment.  
• When using a broadband Internet connection, a  
contract with an Internet service provider is required.  
For more details, contact your nearest Internet  
service provider.  
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a wireless LAN  
Wireless connection to the network is possible through a  
wireless LAN connection. Use the separately sold  
AS-WL300 for connection.  
Connecting the power  
cord  
02  
Connect the power cord after all the connections between  
devices have been completed.  
• Refer to the operating instructions of AS-WL300 for  
the setting details.  
BDP-LX55’s rear panel  
BDP-LX55’s rear panel  
Internet  
Power cord (included)  
To wall outlet  
Modem  
LAN/USB feeder cable  
(included with the AS-WL300)  
Router  
WAN  
Wireless LAN converter  
(AS-WL300)  
DC 5V Ethernet  
WPS  
22  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
03  
Getting Started  
3
Start Setup Navigator.  
Making settings using  
the Setup Navigator  
menu  
Press ENTER.  
Setup Navigator starts.  
4
Select the OSD language.  
Use /to select, then press ENTER.  
Be sure to perform these settings when using the player  
in the following situations.  
When a Pioneer Flat Screen TV that is compatible with  
Control function is connected to this player’s HDMI OUT  
terminal, language settings are imported from the  
Pioneer Flat Screen TV’s language settings before Setup  
Navigator begins.  
• When you use the player for the first time.  
• After Initial Setup format.  
• After updating the player’s software.  
5
Select the appropriate output resolution for the  
connected TV.  
Use /to select, then press ENTER.  
Caution  
• Before turning on the power, check that the  
connections between the player and other devices are  
correct. Also, turn on the power of the devices  
connected to the player before turning on the player’s  
power.  
6
TV.  
Select the appropriate aspect for the connected  
Use /to select, then press ENTER.  
7
Close the Setup Navigator menu.  
Press ENTER.  
• When using a Pioneer Flat Screen TV or front  
projector compatible with the Control function, set  
Control to On on the connected device before turning  
on the player’s power.  
Setup Navigator finishes and the setting is stored.  
• Press  
screen.  
RETURN to go back to the previous  
Note  
• When a Pioneer Flat Screen TV or front projector  
compatible with the Control function is connected to  
the player using an HDMI cable, the player is  
automatically set to the optimum picture quality for  
the connected device.  
1
Turn on the TV’s power and switch the input.  
See the TV’s operating instructions for the details of  
operating the TV.  
2
Turn on the player’s power.  
Press STANDBY/ON.  
Check that the Setup Navigator menu is displayed.  
If the Setup Navigator menu is not  
displayed  
Press  
HOME MENU to display the Home  
Menu, select Initial Setup Setup Navigator   
Start, then press ENTER.  
23  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Preset code list  
Manufacturer Code(s)  
Operating the TV with  
the player’s remote  
control  
03  
PIONEER 00, 31, 32, 07, 36, 42, 51, GPM 41  
22  
GRAETZ 31, 42  
ACURA 44  
ADMIRAL 31  
AIWA 60  
GRANADA 07, 35, 42, 43, 48  
GRADIENTE 30, 57  
GRANDIN 18  
When the manufacturer code for your brand of TV is set  
on the player’s remote control, the TV can be operated  
using the player’s remote control.  
AKAI 32, 35, 42  
AKURA 41  
ALBA 07, 39, 41, 44  
AMSTRAD 42, 44, 47  
ANITECH 44  
GRUNDIG 31, 53  
HANSEATIC 07, 42  
HCM 18, 44  
HINARI 07, 41, 44  
HISAWA 18  
Caution  
• For some models it may not be possible to operate the  
TV with the player’s remote control, even for TVs of  
brands listed on the manufacturer code list.  
ASA 45  
ASUKA 41  
AUDIOGONIC 07, 36  
BASIC LINE 41, 44  
BAUR 31, 07, 42  
BEKO 38  
HITACHI 31, 33, 34, 36, 42, 43, 54,  
06, 10, 24, 25, 18  
HUANYU 56  
HYPSON 07, 18, 46  
ICE 46, 47  
• The setting may be restored to the default after the  
batteries are replaced. If this happens, reset it.  
IMPERIAL 38, 42  
INDIANA 07  
BEON 07  
BLAUPUNKT 31  
BLUE SKY 41  
BLUE STAR 18  
BPL 18  
INGELEN 31  
INTERFUNK 31, 32, 07, 42  
INTERVISION 46, 49  
ISUKAI 41  
BRANDT 36  
ITC 42  
BTC 41  
ITT 31, 32, 42  
JEC 05  
JVC 13, 23  
KAISUI 18, 41, 44  
KAPSCH 31  
BUSH 07, 41, 42, 44, 47, 56  
CASCADE 44  
CATHAY 07  
CENTURION 07  
CGB 42  
CIMLINE 44  
KENDO 42  
KENNEDY 32, 42  
CLARIVOX 07  
CLATRONIC 38  
CONDOR 38  
CONTEC 44  
CROSLEY 32  
KORPEL 07  
KOYODA 44  
LEYCO 07, 40, 46, 48  
LIESENK&TTER 07  
LOEWE 07  
CROWN 38, 44  
CRYSTAL 42  
CYBERTRON 41  
DAEWOO 07, 44, 56  
DAINICHI 41  
DANSAI 07  
DAYTON 44  
DECCA 07, 48  
DIXI 07, 44  
LUXOR 32, 42, 43  
M-ELECTRONIC31, 44, 45, 54, 56,  
07, 36, 51  
MAGNADYNE 32, 49  
MAGNAFON 49  
MAGNAVOX 07, 10, 03, 12, 29  
MANESTH 39, 46  
MARANTZ 07  
1
Input the 2-digit manufacturer code.  
Press the number buttons (0 to 9) to input the code while  
pressing TV CONTROL .  
MARK 07  
Note  
DUMONT 53  
ELIN 07  
ELITE 41  
MATSUI 07, 39, 40, 42, 44, 47, 48  
MCMICHAEL 34  
MEDIATOR 07  
• The factory default setting is 00 (PIONEER).  
ELTA 44  
EMERSON 42  
ERRES 07  
MEMOREX 44  
METZ 31  
• If you make a mistake when inputting the code,  
release TV CONTROL then start over from the  
beginning.  
MINERVA 31, 53  
MITSUBISHI 09, 10, 02, 21, 31  
MULTITECH 44, 49  
NEC 59  
NECKERMANN 31, 07  
NEI 07, 42  
FERGUSON 07, 36, 51  
FINLANDIA 35, 43, 54  
FINLUX 32, 07, 45, 48, 53, 54  
FIRSTLINE 40, 44  
FISHER 32, 35, 38, 45  
FORMENTI 32, 07, 42  
FRONTECH 31, 42, 46  
FRONTECH/PROTECH 32  
FUJITSU 48  
• When there are multiple codes for a manufacturer, try  
inputting them in the indicated order until the TV can  
be operated.  
NIKKAI 05, 07, 41, 46, 48  
NOBLIKO 49  
2
Check that the TV can be operated.  
Operate the TV using TV CONTROL.  
NOKIA 32, 42, 52  
NORDMENDE 32, 36, 51, 52  
OCEANIC 31, 32, 42  
ORION 32, 07, 39, 40  
OSAKI 41, 46, 48  
OSO 41  
– Press to turn the TV’s power on and off.  
INPUT SELECT – Press to switch the TV’s input.  
CH +/– – Press to select the TV channel.  
VOL +/– – Press to adjust the volume.  
FUNAI 40, 46, 58  
GBC 32, 42  
GE 00, 01, 08, 07, 10, 11, 17, 02,  
28, 18  
GEC 07, 34, 48  
GELOSO 32, 44  
GENERAL 29  
GENEXXA 31, 41  
OSUME 48  
OTTO VERSAND 31, 32, 07, 42  
PALLADIUM 38  
PANAMA 46  
GOLDSTAR 10, 23, 21, 02, 07, 50 PANASONIC 31, 07, 08, 42, 22  
GOODMANS 07, 39, 47, 48, 56  
PATHO CINEMA 42  
GORENJE 38  
PAUSA 44  
24  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILCO 32, 42  
PHILIPS 31, 07, 34, 56, 68  
PHOENIX 32  
SONOLOR 31, 35  
SONTEC 07  
SONY 04  
03  
PHONOLA 07  
PROFEX 42, 44  
PROTECH 07, 42, 44, 46, 49  
QUELLE 31, 32, 07, 42, 45, 53  
R-LINE 07  
SOUNDWAVE 07  
STANDARD 41, 44  
STERN 31  
SUSUMU 41  
SYSLINE 07  
RADIOLA 07  
TANDY 31, 41, 48  
RADIOSHACK 10, 23, 21, 02  
RBM 53  
TASHIKO 34  
TATUNG 07, 48  
RCA 01, 10, 15, 16, 17, 18, 61, 62, TEC 42  
09  
TELEAVIA 36  
REDIFFUSION 32, 42  
TELEFUNKEN 36, 37, 52  
REX 31, 46  
TELETECH 44  
ROADSTAR 41, 44, 46  
SABA 31, 36, 42, 51  
SAISHO 39, 44, 46  
SALORA 31, 32, 42, 43  
SAMBERS 49  
TENSAI 40, 41  
THOMSON 36, 51, 52, 63  
THORN 31, 07, 42, 45, 48  
TOMASHI 18  
TOSHIBA 05, 02, 26, 21, 53  
SAMSUNG 07, 38, 44, 46, 69, 70 TOWADA 42  
SANYO 35, 45, 48, 21, 14, 91  
SBR 07, 34  
SCHAUB LORENZ 42  
SCHNEIDER 07, 41, 47  
SEG 42, 46  
ULTRAVOX 32, 42, 49  
UNIDEN 92  
UNIVERSUM 31, 07, 38, 42, 45,  
46, 54  
VESTEL 07  
SEI 32, 40, 49  
SELECO 31, 42  
VICTOR 13  
VOXSON 31  
SHARP 02, 19, 27, 67, 90  
SIAREM 32, 49  
SIEMENS 31  
SINUDYNE 32, 39, 40, 49  
SKANTIC 43  
SOLAVOX 31  
WALTHAM 43  
WATSON 07  
WATT RADIO 32, 42, 49  
WHITE WESTINGHOUSE 07  
YOKO 07, 42, 46  
ZENITH 03, 20  
SONOKO 07, 44  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CPhlaapteyr b4 ack  
04  
• When a BD with usage restrictions set by a BD  
recorder is loaded, the PIN code input screen  
appears. In this case, input your PIN code.  
3
Press PLAY to play the disc.  
• To pause, press PAUSE during playback.  
• To stop, press STOP during playback.  
Note  
• Some discs start playing automatically when the disc  
tray is closed.  
• DVD-Video discs have parental lock features. Input  
the password registered in the player’s settings to  
unlock the parental lock. For details, see page 46.  
If the disc menu is displayed  
For some discs, the disc menu is displayed automatically  
when playback starts. The contents of the disc menu and  
the way to operate depend on the disc.  
Resuming playback from where it  
was stopped (resume playback  
function)  
• When STOP is pressed during playback, the point  
at which the disc stopped is stored in the memory.  
When PLAY is pressed after that, playback  
resumes from that point.  
• To cancel the resume playback function, press  
STOP while playback is stopped.  
Playing discs or files  
Note  
• The resume playback function is canceled  
automatically in the following cases:  
This section describes the player’s main operations.  
For the types of discs and files that can be played, see  
page 7. Video, image and audio files recorded on discs  
are played with the Home Media Gallery (page 34).  
– When the disc tray is opened.  
– When the file list window is switched.  
– When the power is turned off. (For BDs and DVDs  
this does not cancel the resume playback  
function.)  
1
Press STANDBY/ON to turn on the power.  
Turn the TV’s power on and switch its input beforehand.  
2
Press OPEN/CLOSE to open the disc tray and  
• When you want to continue playback from a position  
you specify to be played next time, see Continuing  
playback from a specified position (Continued Viewing  
Playback) on page 33.  
load the disc.  
Note  
• The resume playback function cannot be used for  
some discs.  
• Load the disc with the printed side facing  
up.  
• Several dozen seconds are required to read  
the disc. Once reading is completed, the  
type of disc is displayed on the player’s front  
panel display.  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Forward and reverse  
scanning  
Playing a specific section  
within a title or track  
repeatedly (A-B Repeat)  
Use this procedure to play a specific section within a title  
or track repeatedly.  
04  
During playback, press REV or FWD.  
• The scanning speed switches each time the button is  
pressed. The speed steps depend on the disc or file  
(the speed is displayed on the TV screen).  
1
During playback, press A-B to select the starting  
point.  
To resume normal playback  
A- is displayed on the TV screen.  
Press PLAY.  
2
During playback, press A-B to select the ending  
point.  
Playing specific chapters or  
tracks  
• A-B Repeat playback starts.  
To cancel A-B Repeat play  
• Press A-B during the A-B Repeat play.  
Input the number of the title, chapter or track you  
want to play.  
• Use the number buttons (0 to 9) to input the number,  
then press ENTER.  
Note  
• A-B Repeat play is canceled in the following cases:  
– When you search outside of the repeat range.  
– When you start other Repeat Play or Random Play.  
• Press CLEAR to clear the values you have input.  
Skipping content  
Playing repeatedly  
(Repeat Play)  
Use this procedure to play the currently playing disc, title,  
chapter, track or file repeatedly.  
During playback, press or .  
• When is pressed, the playback skips ahead to the  
beginning of the next chapter/track/file.  
• When is pressed while a video or audio file is  
playing, the playback skips back to the beginning of  
the currently playing chapter/track/file. Press twice to  
skip back to the beginning of the previous chapter/  
track/file.  
During playback, press REPEAT.  
• Each time you press REPEAT the type of repeat  
modes changes as shown below.  
BD  
• When is pressed while an image file is playing,  
Current chapter Current title  
playback returns to the previous file.  
DVD  
Playing in slow motion  
Current chapter Current title All titles  
CD/Video file/Audio file/Image file  
Current track/file All titles  
While playback is paused, press and hold /  
or /.  
To cancel Repeat Play  
• Press REPEAT several times during Repeat Play.  
• The speed switches each time the button is pressed  
(the speed is displayed on the TV screen).  
To resume normal playback  
Note  
Press PLAY.  
• Repeat Play is canceled in the following cases:  
– When you search outside the repeat range.  
– When you start other Repeat Play or Random Play.  
Step forward and step  
reverse  
While playback is paused, press / or /.  
• The picture moves a step forward or reverse each time  
the button is pressed.  
To resume normal playback  
Press PLAY.  
27  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting the bookmark  
Playing in the desired order  
(Programmed Play)  
04  
Select the bookmark you want to delete, then  
press CLEAR.  
• Bookmarks may not be allowed to make for some  
discs.  
1
During playback, press PROGRAM.  
• The program screen is displayed.  
• Bookmarks are canceled in the following cases:  
– When the player’s power turned off.  
– When the disc tray is opened.  
2
Select the program number.  
Use /to select, then press ENTER.  
3
Select the title you want to play.  
Use /to select, then press .  
Zoom  
4
Select the chapter you want to play.  
Use /to select, then press ENTER.  
During playback, press ZOOM.  
• Each time you press ZOOM, the zoom level changes  
as shown below.  
5
Press PLAY.  
• Playback starts.  
Zoom 2x Zoom 3x Zoom 4x Zoom 1/2x   
Zoom 1/3x Zoom 1/4x Normal (not displayed)  
Editing the program  
1
Select the program number you want to edit,  
Note  
then press ENTER.  
• This function does not work with some discs.  
2
Select title/chapter, then press ENTER.  
Displaying thumbnail  
images  
Deleting the program  
Select the program number you want to delete,  
then press CLEAR.  
Displaying the thumbnails of the image files on the disc.  
• To delete all the programs, press  
RETURN.  
During playback, press INDEX.  
• Display the thumbnail of image files. The maximum  
number is 12 at once.  
Note  
• If you select one of the image and press ENTER,  
slideshow will start from the image you selected.  
• When you use audio CDs for Programmed Play, enter  
the track number in step 3.  
• This function does not work with BDs.  
Switching the camera angles  
For BD-ROM and DVD-Video discs on which multiple  
angles are recorded, the angles can be switched during  
playback.  
Making bookmarks  
You can make bookmarks on the video currently playing  
and play back the scene later.  
During playback, press ANGLE.  
During playback, press BOOKMARK.  
• The bookmark is made.  
• The current angle and total number of recorded  
angles are displayed on the TV screen.  
To switch the angles, press ANGLE again.  
• Maximum number of bookmarks are 12.  
• The angles can also be switched by selecting Angle  
from the FUNCTION menu.  
Playing the bookmarked scene  
• If the angles are not switched when ANGLE is  
pressed, switch them from the disc menu screen.  
1
Press and hold BOOKMARK for a few seconds.  
• The list of bookmarks is displayed.  
2
Select the bookmark you want to play.  
Use /to select, then press ENTER.  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Group 3 Belarusian(be/bel), Bulgarian(bg/bul), Macedonian(mk/  
mkd), Moldavian(mo/mol), Russian(ru/rus), Serbian(sr/  
srp), Ukrainian(uk/ukr)  
Switching the subtitles  
For discs or files on which multiple subtitles are recorded,  
the subtitles can be switched during playback.  
04  
Group 4 Greek(el/ell)  
Group 5 Estonian(et/est), Kurdish(ku/kur), Turkish(tr/tur)  
Caution  
• The subtitles cannot be switched for discs recorded  
by a DVD or BD recorder. Also refer to the operating  
instructions for the device used for recording.  
Note  
• Depending on the file, the external subtitles may not  
be displayed properly.  
During playback, press SUBTITLE.  
• The current subtitle and total number of recorded  
subtitles are displayed on the TV screen.  
To switch the subtitle, press SUBTITLE again.  
Displaying the disc  
information  
• The subtitles can also be switched by selecting  
Subtitle from the FUNCTION menu.  
Press DISPLAY.  
The disc information appears on the TV screen. To switch  
• If the subtitles are not switched when SUBTITLE is  
pressed, switch them from the disc menu screen.  
off the information display, press DISPLAY again.  
The information display differs between during playback  
and when playback is stopped.  
Turning the subtitles off  
Switching the audio and  
secondary audio  
Press SUBTITLE several times or select Subtitle  
from the FUNCTION menu to switch the setting to  
Off.  
For discs or files on which multiple audio streams/  
channels are recorded, audio streams/channels can be  
switched during playback. Also use this procedure to  
switch the secondary audio for BD-ROMs on which  
secondary audio is recorded.  
About displaying external subtitle  
files while playing DivX media files  
In addition to the subtitles recorded in DivX media files,  
this player also supports the display of external subtitle  
files. If a file has the same name as that of a DivX media  
file aside from the file extension and the extension is one  
of the extensions listed below, the file is treated as an  
external subtitle file. Note that DivX media files and  
external subtitle files must be located in the same folder.  
Only one external subtitle file can be displayed on this  
player. Use a computer, etc., to delete any external  
subtitle files you do not want to display from the disc.  
During playback, press AUDIO/2nd AUDIO.  
• The current audio and total number of recorded audio  
streams are displayed on the TV screen.  
To switch the audio, press AUDIO/2nd AUDIO again.  
• The audio/secondary audio can also be switched by  
selecting Audio or Secondary Audio from the  
FUNCTION menu.  
• If the audio/secondary audio is not switched when  
AUDIO/2nd AUDIO is pressed, switch it from the  
disc menu screen.  
.srt, .sub, .txt, .smi, .ssa, .ass  
If the language code is specified for the external subtitle  
file, the subtitles are displayed with the font  
corresponding to that language code. If no language  
code is specified, the subtitles are displayed with the font  
corresponding to the language code set at Subtitle  
Language (page 42). The same font is used for all the  
languages in each of the groups below.  
Turning the Secondary Audio off  
Press 2nd AUDIO several times or select  
Secondary Audio from the FUNCTION menu to switch  
the setting to Off.  
Group 1 Afrikaans(af/afr), Basque(eu/eus), Catalan(ca/cat),  
Danish(da/dan), Dutch(nl/nld), English(en/eng),  
Faroese(fo/fao), Finnish(fi/fin), French(fr/fra), Galician(gl/  
glg), German(de/deu), Guarani(gn/grn), Icelandic(is/isl),  
Irish(ga/gle), Italian(it/ita), Latin(la/lat), Norwegian(no/  
nor), Portuguese(pt/por), Rhaeto-Romance(rm/roh),  
Scots-Gaelic(gd/gla), Spanish(es/spa), Swahili(sw/swa),  
Swedish(sv/swe), Zulu(zu/zul)  
Group 2 Albanian(sq/sqi), Croatian(hr/hrv), Czech(cs/ces),  
Hungarian(hu/hun), Polish(pl/pol), Romanian(ro/ron),  
Slovak(sk/slk), Slovenian(sl/slv)  
29  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• If a USB memory device containing other data  
(previously recorded) is used, the video and audio  
may not play back properly.  
Switching the secondary  
video  
Use the procedure below to switch the secondary video  
(Picture-in-Picture) recorded on the BD-ROM.  
04  
• Do not disconnect the USB memory device while  
playback is in progress.  
• Some time may be required for the data to load (read/  
write).  
During playback, press 2nd VIDEO.  
• The current secondary video and total number of  
recorded secondary video streams are displayed on  
the TV screen.  
Caution  
To switch the secondary video, press 2nd VIDEO  
again.  
• It may not be possible to use the BONUSVIEW and  
BD-LIVE functions if there is insufficient space on the  
USB memory device. In this case, refer to Erasing data  
that has been added to BDs and application data on  
page 45 for erasing the Virtual Package data and the  
BD-LIVE data in the USB memory device.  
Note  
• Operation of USB memory devices is not guaranteed.  
Primary audio/video  
• Playback of BD-LIVE function data differs depending  
on the disc used. For details, consult the user  
instructions supplied with the disc.  
Secondary audio/video  
• The secondary video can also be switched by  
selecting Secondary Video from the FUNCTION  
menu.  
• To enjoy the BD-LIVE function, a network connection  
and settings are required (pages 21 and 44).  
• If the secondary video is not switched when 2nd  
VIDEO is pressed, switch it from the disc menu  
screen.  
• BD-LIVE is a function that provides for connection to  
the Internet. Discs supporting the BD-LIVE function  
may send ID codes identifying this player and the disc  
to the contents provider via the Internet.  
Turning the Secondary Video off  
Press 2nd VIDEO several times or select  
Secondary Video from the FUNCTION menu to switch  
the setting to Off.  
Enjoying BONUSVIEW or  
BD-LIVE  
This player is compatible with BD-Video BONUSVIEW  
and BD-LIVE.  
When using BD-Video discs compatible with  
BONUSVIEW, you can enjoy such functions as secondary  
video (picture in picture) (above) and secondary audio  
(page 29). With BD-Video discs supporting BD-LIVE,  
special video images and other data can be downloaded  
from the Internet.  
Data recorded on BD video and downloaded from BD-  
LIVE is stored on the USB memory device (external  
memory). To enjoy these functions, connect a USB  
memory device (minimum 1 GB capacity, 2 GB or greater  
recommended) supporting USB 2.0 High Speed (480  
Mbit/s) to the USB port.  
• When you insert or remove a USB memory device, be  
sure to turn the player’s power off.  
• To recall data stored in the USB memory device, first  
insert the disc media that was being used at the time  
the data was downloaded (if a different disc is loaded,  
the data stored on the USB memory device cannot be  
played).  
30  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback functions  
04  
The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot  
be used. Check the usable functions on the table below.  
Disc/file type  
DVD-R  
/-RW  
(VR  
1
Function  
DVD-  
BD-  
ROM  
BD-R  
/-RE  
DVD-  
Video  
Video Image Audio Audio  
AVCREC AVCHD  
2
file  
file  
file  
CD  
Audio  
format)  
Forward and reverse  
4
4
4
4
4
4
4
4
5
5
3
scanning  
Playing specific titles,  
chapters or tracks  
Skipping content  
3,6  
7
Slow motion play  
Step forward and step  
8
3
reverse  
3
A-B Repeat play  
Repeat Play  
Zoom  
9
Angle  
10  
Subtitle  
11  
Audio  
12  
13  
Secondary audio  
14  
15  
Secondary video  
Disc information  
1. Some functions may not work for some discs or files, even if indicated [] on the table.  
2. Except BDP-140.  
3. For some discs, normal playback resumes automatically when the chapter switches.  
4. No sound is produced during forward and reverse scanning.  
5. Sound is produced during forward and reverse scanning.  
6. • No sound is output during slow motion playback.  
• It is not possible to switch the speed during reverse slow motion playback.  
7. Reverse slow motion playback is not possible.  
8. Reverse step playback is not possible.  
9. Angle mark is displayed for scenes at which multiple angles are recorded if Angle Mark is set to On (page 42).  
10. • The types of recorded subtitles depend on the disc and file.  
• In some cases, the subtitle may switch or the switching screen provided on the disc may be displayed immediately, without the current  
subtitle or the total number of subtitles recorded on the disc being displayed.  
11. The types of recorded audio streams depend on the disc and file.  
12. • The types of recorded secondary audio streams depend on the disc and file.  
• In some cases, the secondary audio may switch or the switching screen provided on the disc may be displayed immediately, without the  
current secondary audio or the total number of secondary audio streams recorded on the disc being displayed.  
• Secondary audio mark is displayed for scenes at which secondary audio is recorded if Secondary Audio Mark is set to On (page 42).  
13. Some discs do not include secondary audio.  
14. • In some cases, the secondary video may switch or the switching screen provided on the disc may be displayed immediately, without the  
current secondary video or the total number of secondary video streams recorded on the disc being displayed.  
• Secondary video mark is displayed for scenes at which secondary video is recorded if PIP Mark is set to On (page 42).  
15. Some discs do not include secondary video.  
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Item  
Description  
Using the FUNCTION  
menu  
Various functions can be called out according to the  
player’s operating status.  
04  
Ins Replay  
Slide Show  
Skip backward 10 seconds.  
Switch the playback speed while playing  
the picture slide show.  
Transition  
Change the style of the slide show while  
playing the picture slide show.  
1
Display the FUNCTION menu.  
* The items shown on the FUNCTION menu depend on  
the type of the disc.  
Press FUNCTION during playback.  
2
Select and set the item.  
Use /to select, then press ENTER.  
Note  
• Selectable items depend on the type of disc.  
Note  
• Items that cannot be changed are displayed in gray.  
The items that can be selected depend on the player’s  
status.  
Playing from a specific time  
(Time Search)  
To change the setting of the  
selected item  
1
Select Time.  
Use /to select, then press ENTER.  
2
Input the time.  
Use /to change.  
Use the number buttons (0 to 9) to input the time.  
To close the FUNCTION menu  
Press FUNCTION.  
• To play from 45 minutes, input 0, 0, 4, 5, 0 and 0, then  
press ENTER.  
• To play from 1 hour 20 minutes, input 0, 1, 2, 0, 0 and  
0, then press ENTER.  
FUNCTION menu item list  
Item  
Description  
• Press CLEAR to clear the values you have input.  
Video Adjust  
(BDP-LX55)  
Display the picture quality adjustment  
screen (page 44).  
3
Starting playback from the specified time.  
Press ENTER.  
Title  
Display the title information for the  
currently playing disc and total number  
of titles on the disc. Also select the title  
you want to play. (See the following  
description.)  
Playing a specific title,  
chapter or track (Search)  
Chapter (track/file)  
Display the information for the currently  
playing chapter (track/file) and total  
number of chapters in the disc. Also  
select the chapter (track/file) you want to  
play. (See the following description.)  
1
Select Title or Chapter (track/file).  
Use /to select, then press ENTER.  
2
Input the Title or Chapter (track/file) number.  
Use the number buttons (0 to 9) or /to input the  
number.  
Time  
Display the elapsed or remaining time.  
Also enter the time from which you want  
to start playback. (See the following  
description.)  
• To search for title 32, input 3 and 2, then press  
ENTER.  
• Press CLEAR to clear the values you have input.  
Play Mode  
Audio  
Switch the play mode (page 33).  
Switch the audio.  
3
Starting playback from the specified title, chapter  
or track.  
Press ENTER.  
Angle  
Switch the BD-ROM/DVD-Video disc’s  
camera angle.  
Subtitle  
Switch the subtitle language.  
Switch the subtitle code page.  
Code Page  
Second Video  
Switch the BD-ROM’s secondary video  
(Picture-in-Picture) (page 30).  
Second Audio  
Bitrate  
Switch the BD-ROM’s secondary audio  
(page 29).  
Display the bitrate of the audio/video/  
secondary video/secondary audio.  
Still off  
Switch off the BD-ROM’s still picture.  
Skip forward 30 seconds.  
Ins Search  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing specified range of  
discs, titles or chapter (track/  
file) in random order  
04  
You can select from 2 types of random playback.  
1
Select Play Mode.  
Use /to select, then press ENTER.  
2
Select the playing mode.  
Use /to select, then press ENTER.  
Random play  
The specified range of discs, titles or chapter (track/file) is  
played in random order. The same item may be played  
consecutively.  
Shuffle play  
The specified range of discs, titles or chapter (track/file) is  
played in random order. Each item is played once.  
Continuing playback from a  
specified position  
(Continued Viewing  
Playback)  
This function allows you to continue playback from a  
position you specify to be played next time, even after  
turning the power off.  
Setting  
During playback, press CONTINUED at the  
position from which you want to start continued  
viewing playback.  
The elapsed playing time at the specified position is  
displayed on the TV screen.  
Playing  
1
Press PLAY to play the title for which you have  
set continued viewing playback.  
The FUNCTION menu screen appears automatically to  
show the point (time) when you pressed CONTINUED.  
• The Function control screen can also be displayed by  
pressing FUNCTION during playback.  
2
Press ENTER, then select the specified continued  
viewing playback time.  
Playback starts from the specified position.  
Note  
• The continued viewing playback setting is canceled  
when OPEN/CLOSE is pressed.  
• Continued viewing playback may not work properly  
with some discs.  
33  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CPhlaapteyr b5 ack from Home Media Gallery  
05  
• The following files are allowed to be played from  
Home Media Gallery:  
– PCs running Microsoft Windows Vista or XP with  
Windows Media Player 11 installed  
– PCs running Microsoft Windows 7 with Windows  
Media Player 12 installed  
– DLNA-compatible digital media servers (on PCs or  
other components)  
– Files stored in a PC or DMS (Digital Media Server)  
as described above can be played by Digital Media  
Player (DMP).  
The player supports the use of such DMP.  
About Home Media  
Gallery  
• To play back audio files stored on components on the  
network, you must turn on the DHCP server function  
of your router. In case your router does not have the  
built-in DHCP server function, it is necessary to set up  
the network manually. Otherwise, you cannot play  
back files stored on components on the network. See  
page 44.  
About network playback  
This player’s Home Media Gallery function allows you to  
display a list of input sources and start playback. This  
The network playback function of this unit uses the  
chapter describes setup and playback procedures  
following technologies:  
required to enjoy these features. When you play the files  
stored on your computer or the components on the  
Windows Media Player  
network, it is advisory that you also refer to the operation  
See Windows Media Player 11/Windows Media Player 12  
manual supplied with your network component.  
above for more on this.  
The input sources that can be played from Home Media  
Gallery are as shown below.  
Windows Media DRM  
• BD-R/RE (BDAV format) discs  
Microsoft Windows Media Digital Rights Management  
(WMDRM) is a platform to protect and securely deliver  
content for playback on computers, portable devices and  
network devices. Home Media Gallery functions as a  
WMDRM 10 for networked devices. WMDRM protected  
content can only be played on media servers supporting  
WMDRM.  
• DVD-R/RW (VR format) discs  
• Audio CDs (CD-DA, SACD and DTS CDs)  
• DVD/CDs on which only data files of video, image or  
audio files, etc. are recorded.  
• USB memory device  
Content owners use WMDRM technology to protect their  
intellectual property, including copyrights. This device  
uses WMDRM software to access WMDRM protected  
content. If the WMDRM software fails to protect the  
content, content owners may ask Microsoft to revoke the  
software’s ability to use WMDRM to play or copy  
protected content. Revocation does not affect  
unprotected content. When you download licenses for  
protected content, you agree that Microsoft may include  
a revocation list with the licenses. Content owners may  
require you to upgrade WMDRM to access their content.  
If you decline an upgrade, you will not be able to access  
content that requires the upgrade. This product is  
protected by certain intellectual property rights of  
Microsoft. Use or distribution of such technology outside  
of this product is prohibited without a license from  
Microsoft.  
• Files on the network servers (on the PCs or  
components connected to the player via LAN  
interface.)  
Note  
• The Home Media Gallery allows you to play files on  
media servers connected on an identical Local Area  
Network (LAN) as the receiver.  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLNA  
Disclaimer for Third Party Content  
Access to content provided by third parties requires a  
high speed Internet connection and may also require  
account registration and a paid subscription.  
05  
Third party content services may be changed, suspended,  
interrupted, or discontinued at any time without notice,  
and Pioneer disclaims any liability in connection with  
such occurrences.  
DLNA CERTIFIED® Audio Player  
Pioneer does not represent or warrant that content  
services will continue to be provided or available for a  
particular period of time, and any such warranty, express  
or implied, is disclaimed.  
The Digital Living Network Alliance (DLNA) is a cross-  
industry organization of consumer electronics,  
computing industry and mobile device companies.  
Digital Living provides consumers with easy sharing of  
digital media through a wired or wireless network in the  
home.  
About playback behavior over a  
network  
The DLNA certification logo makes it easy to find  
products that comply with the DLNA Interoperability  
Guidelines. This unit complies with DLNA Interoperability  
Guidelines v1.5. When a PC running DLNA server  
software or a DLNA compatible device is connected to  
this player, some setting changes of software or other  
devices may be required. Please refer to the operating  
instructions for the software or device for more  
information.  
• Playback may stall when the PC is switched off or any  
media files stored on it are deleted while playing  
content.  
• If there are problems within the network environment  
(heavy network traffic, etc.) content may not be  
displayed or played properly (playback may be  
interrupted or stalled). For best performance, a  
10BASE-T/100BASE-TX connection between the  
player and the PC is recommended.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are  
trademarks, service marks, or certification marks of the  
Digital Living Network Alliance.  
• If several clients are playing simultaneously, as the  
case may be, playback is interrupted or stalled.  
• Depending on the security software installed on a  
connected PC and the setting of such software,  
network connection may be blocked.  
Content playable over a network  
• Even when encoded in a compatible format, some  
files may not play correctly.  
Pioneer is not responsible for any malfunction of the  
player and/or the Home Media Gallery features due to  
communication errors/malfunctions associated with  
your network connection and/or your PC, or other  
connected equipment. Please contact your PC  
manufacturer or Internet service provider.  
• Some functions may not be supported depending on  
the server type or version used.  
• Supported file formats vary by server. As such, files  
not supported by your server are not displayed on this  
unit. For more information check with the  
manufacturer of your server.  
Windows Media is either a registered trademark or  
trademark of Microsoft Corporation in the United States  
and/or other countries.  
This product includes technology owned by Microsoft  
Corporation and cannot be used or distributed without a  
license from Microsoft Licensing, Inc.  
Microsoft®, Windows®7, Windows®Vista, Windows®XP,  
Windows®2000, Windows®Millennium Edition,  
Windows®98, and WindowsNT® are either registered  
trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries.  
35  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing back image files  
DLNA Search  
05  
Playing back the files stored on the components  
connected to the player via network.  
About Slideshow  
A display of the files on the disc or in the folder switches  
automatically.  
1
Press HOME MEDIA GALLERY to display the  
Home Media Gallery.  
The Home Media Gallery can also be displayed by  
selecting Home Media Gallery from Home Menu, then  
pressing ENTER.  
Note  
• When playing an audio CD (CD-DA/SACD/DTS-CD),  
the Now Playing screen is displayed.  
2
Select DLNA Search.  
• Some BD-R/-RE discs have playback protection. To  
cancel the protection, input the password set for the  
disc.  
Use /to select, then press ENTER.  
3
Select the server which contains the file you want  
to play.  
• It may take a few seconds before playback starts. This  
is normal.  
4
Select the file you want to play.  
Use /to select, then press ENTER.  
• It may not be possible to play some files properly.  
• The number of views may be restricted.  
Note  
• This player does not support DTCP-IP.  
Recorded files and contents that are protected by  
digital copyright protection cannot be played via LAN  
interface.  
Playing in the desired  
order (Playlist)  
The discs that can add tracks and files to the Playlist are  
as shown below.  
Disc/USB playback  
• DVDs/CDs/USB memory devices on which audio files  
are recorded  
1
Press HOME MEDIA GALLERY to display the  
Home Media Gallery.  
Adding tracks/files  
Use this procedure to add tracks and files, and create the  
The Home Media Gallery can also be displayed by  
selecting Home Media Gallery from Home Menu, then  
pressing ENTER.  
Playlist.  
2
Select Disc or USB.  
1
Press HOME MEDIA GALLERY to display the  
Use /to select, then press ENTER.  
Home Media Gallery.  
The Home Media Gallery can also be displayed by  
selecting Home Media Gallery from Home Menu, then  
pressing ENTER.  
3
Select Photo/Music/Video/AVCHD.  
Use /to select, then press ENTER.  
• This step is not for the discs that have been recorded  
with BDAV/VR/AVCREC format.  
2
Select Disc or USB.  
Load the disc beforehand.  
• To play files in AVCHD format on a USB memory  
device, create a folder named “AVCHD” on the USB  
memory device, then copy the “BDMV” folder  
containing which the files to be played into the  
“AVCHD” folder.  
Use /to select, then press ENTER.  
3
Select the track/file to be added.  
Use to select.  
4
Press POP UP MENU to display the POP UP MENU  
4
Select the title/track or file you want to play.  
menu.  
Use /to select, then press ENTER.  
5
Select Add to Playlist to add to Playlist.  
Playback starts from the selected title/track or file.  
Use /to select, then press ENTER.  
• If the file you want to play is in the folder, select the  
folder that contains the file first.  
The track or file selected in step 3 is added to the Playlist.  
• To add more tracks or files, repeat steps 3 to 5.  
36  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing the Playlist  
05  
1
Press HOME MEDIA GALLERY to display the  
Home Media Gallery.  
The Home Media Gallery can also be displayed by  
selecting Home Media Gallery from Home Menu, then  
pressing ENTER.  
2
Select Playlist.  
Use/to select, then press ENTER.  
3
Select the track/file to be played.  
Use/to select, then press ENTER.  
Playback starts from the selected track/file and continues  
until the end of the list is reached. Use / to play  
the previous or next track/file. The Now Playing screen is  
displayed.  
Deleting tracks/files from  
the Playlist  
1
Select the track/file to be deleted, then press POP  
UP MENU to display the POP UP MENU menu.  
2
Use /to select Delete from Playlist, then press  
ENTER.  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CPhlaapteyr i6ng the web contents  
06  
You can enjoy some streaming contents on the Internet  
with the player.  
• Access to content provided by third parties requires a  
high speed Internet connection and may also require  
account registration and a paid subscription.  
Third party content services may be changed,  
suspended, interrupted, or discontinued at any time  
without notice, and Pioneer disclaims any liability in  
connection with such occurrences.  
Available web  
contents  
Pioneer does not represent or warrant that content  
services will continue to be provided or available for a  
particular period of time, and any such warranty,  
express or implied, is disclaimed.  
• YouTube (MPEG4 AVC H.264)  
• Picasa  
Note  
About YouTube  
Playing the items  
• YouTube videos of the following sizes can be played.  
– Standard quality (400 x 226 pixels, 200 kbps)  
– Medium quality (480 x 360 pixels, 512 kbps)  
– High quality (854 x 480 pixels, 900 kbps)  
– HD (720p) (1280 x 720 pixels, 2 Mbps)  
– HD (1080p) (1920 x 1080 pixels, 4 Mbps)  
• This player supports the YouTube Leanback service.  
The Youtube Leanback service is only available in  
English for now.  
support/youtube/ for further information.  
Caution  
You must connect the player to the Internet beforehand.  
See Connecting to the network through LAN interface on  
page 21 for the details.  
• YouTube videos for mobile phones cannot be played.  
• Some YouTube videos cannot be played.  
About Picasa  
1
Display the selection screen.  
The selection screen can be selected by pressing  
• Picasa is available only in English. Refer to  
details.  
HOME MENU then selecting Web Contents   
Desired web content.  
– Register your user name and password on the PC  
before you use Picasa Web Albums.  
2
Select the type of web contents.  
Use /to select, then press ENTER.  
– When you access Picasa from this player for the  
first time, select the New User icon and enter your  
registered user name and password.  
3
Press /to select the item you want to play,  
then press ENTER.  
To stop playback, press EXIT. Playback of the video stops  
and the Home Menu screen reappears.  
• Depending on the Internet connection environment,  
it may not be possible to play web contents properly.  
• To access to web contents, this player requires a  
broadband Internet connection. A contract with an  
Internet provider is required for a broadband Internet  
connection.  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7  
07  
Advanced settings  
Changing the settings  
Operating the Initial Setup  
screen  
1
When playback is stopped, display the Home  
Menu screen.  
Press HOME MENU.  
Select and set Initial Setup.  
2
Use /to select, then press ENTER.  
3
Select the item and change the setting.  
Use ///to select, then press ENTER.  
Closing the Initial Setup screen  
Press  
HOME MENU or  
RETURN.  
Note  
• The items that can be selected depend on the player’s status.  
• In Options, the factory default settings are indicated in bold.  
Setting  
Options  
Explanation  
Select this when connecting to a wide (16:9) TV.  
TV Screen  
16:9 Full  
16:9 Normal  
Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed  
with vertical black bars along the sides.  
4:3 Pan&Scan  
4:3 Letterbox  
Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The  
video will be played with the left and right sides of the image cut off to display  
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)  
Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The  
video will be played with black bands at the top and bottom.  
Video Adjust  
The quality of the playback picture can be adjusted according to the TV you are using (page 44).  
Stream Smoother  
(BDP-LX55)  
Auto  
Select this to automatically correct compressed video files on the network, a  
disc or a USB memory device and play them with a more natural picture  
quality.  
Off  
Sharpness  
High  
Middle  
Low  
Standard  
Vivid  
Cinema  
Custom  
0
Choose the level of sharpness.  
Choose the video output mode.  
(Except BDP-LX55)  
Video Mode  
(Except BDP-LX55)  
Noise Reduction  
Choose the level of noise reduction.  
(Except BDP-LX55)  
1
2
3
39  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Bitstream  
PCM  
Explanation  
07  
Digital Output  
Select this to output digital audio signals directly.  
Select this to output digital audio signals converted to PCM audio signals.  
Select this to output digital audio signals converted to DTS Digital Surround.  
Select this to output audio signals other than digital audio signals.  
Re-encode  
Off  
DTS Downmix (BDP-LX55) Stereo  
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or  
DTS Digital Surround audio signals converted to linear PCM audio signals  
are converted into 2-channel (stereo) signals for output.  
Lt/Rt  
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or  
DTS Digital Surround audio signals converted to linear PCM audio signals  
are converted into 2-channel signals compatible with Dolby Surround for  
output (when the connected AV receiver or amplifier, etc., is compatible with  
Dolby Pro Logic, the AV receiver or amplifier outputs the linear PCM audio  
signals as surround audio signals).  
Downsampling  
48k  
96k  
Select this when playing a disc recorded with a sampling frequency of 48 kHz.  
Select this when playing a disc recorded with a sampling frequency of 96 kHz.  
192k  
Select this when playing a disc recorded with a sampling frequency of 192  
kHz.  
DRC (Dynamic Range  
Control)  
Off  
Select this to output audio signals without using the DRC function.  
On  
Select this to adjust the range between the loudest and softest sounds  
(dynamic range) for playback at average volume. Use this when it is hard to  
hear dialog or when watching movies at midnight.  
* Only Dolby digital and  
analog audio signals are  
supported.  
Auto  
Select to switch the DRC setting On/Off automatically according to the input  
audio signal from the disc.  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Single  
Explanation  
07  
HDMI Mode (BDP-LX55)  
Select this when an HDMI cable is connected to HDMI OUT (MAIN) terminal only.  
Select this when HDMI cables are connected to both HDMI OUT terminals.  
Separate  
Pure Audio  
Select this to enjoy music only with a better sound quality when devices are  
connected to both HDMI output terminals. With this setting, music is output  
from the HDMI OUT (SUB) terminal only, and video signals are only output  
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.  
Also refer to Setting the HDMI Mode (Only for BDP-LX55) on page 16.  
Color Space  
RGB  
Select this to output the video signals as RGB signals. Choose this if the  
colors seem too faint and the black seems too bright.  
YCbCr  
Select this to output the video signals as YCbCr 4:4:4 signals.  
Select this to output the video signals as YCbCr 4:2:2 signals.  
YCbCr 422  
Full RGB  
Select this to output the video signals as RGB signals. Choose this if the colors  
seem too dense and all the dark colors are displayed in a uniform black.  
Resolution  
Auto  
Select this to choose the resolution of the video signals output from the  
HDMI OUT terminal automatically.  
480I/576I  
Output the video signals from the HDMI OUT terminal with the selected  
(Except BDP-LX55) resolution.  
The resolution can be changed by pressing HDMI, but Auto cannot be  
selected.  
480P/576P  
720P  
1080I  
1080P  
HDMI Audio Out  
Bitstream  
PCM  
Select this to output HDMI audio signals directly.  
Select this to output HDMI audio signals converted to 2-channel audio signals.  
Select this to choose the type of audio signals automatically.  
Re-encode  
Off  
Select this when you do not want to output the audio signal from the HDMI  
output terminal.  
Control  
On  
Select this to control the player with the remote control of the connected AV  
device using an HDMI cable. Also refer to page 16.  
Off  
Select this when you do not want to control the player with the remote control  
of the connected AV device using an HDMI cable.  
To use Sound Retriever Link, Stream Smoother Link and PQLS (pages 16 and 17), Control must be set to On.  
HDMI Deep color  
30bits  
36bits  
Off  
Select this when outputting the video signals with 30-bit color.  
Select this when outputting the video signals with 36-bit color.  
Select this when outputting the video signals with normal 24-bit color.  
HDMI 1080P 24Hz  
On  
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24  
video signals to a TV compatible with 1080p/24.  
Off  
Select this when Resolution is set to 1080P and outputting 1080p/60 video  
signals to a TV compatible with 1080p/60.  
HDMI 3D  
3D notice  
Auto  
Off  
With 3D discs, the disc is played with 3D images.  
Even with 3D discs, the disc is played with 2D images.  
This sets whether or not to display the 3D notice when playing 3D images.  
Yes  
No  
IP setting  
Select this to set the IP address of the player and DNS server (page 44).  
Proxy Server  
Information  
Only set the proxy server if so instructed by your Internet service provider (page 44).  
Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server  
(primary) and DNS server (secondary).  
Connection test  
Select this to test the network connection (page 45).  
Internet Connection  
Select this when connecting to the Internet.  
Enable  
Disable  
Select this when not connecting to the Internet.  
All discs are allowed to connect to BD-LIVE.  
BD-Live connection  
DLNA  
Permitted  
Partial Permitted  
Prohibited  
Enable  
Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.  
No disc is allowed to connect to BD-LIVE.  
Select this when connecting to DLNA server.  
41  
En  
Disable  
Select this when not connecting to DLNA server.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
OSD  
Options  
Explanation  
07  
available languages Choose a language for the on-screen displays from the listed languages.  
Audio  
available languages Choose a language from the listed languages to set the default audio  
language for BD-ROM and DVD-Video playback.  
* For some discs, it may not  
be possible to change to the  
selected language.  
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.  
Subtitle  
available languages Choose a language from the listed languages to set the default subtitle  
language for BD-ROM and DVD-Video playback.  
* For some discs, it may not  
be possible to change to the  
selected language.  
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.  
Menu  
available languages Choose a language from the listed languages to set the default language for  
BD-ROM and DVD-Video menus.  
* For some discs, it may not  
be possible to change to the  
selected language.  
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.  
Angle Mark  
On  
Select this to display the angle mark on the TV screen (page 28). This is the  
factory default setting for the BDP-440/BDP-140.  
Off  
Select this if you do not want to display the angle mark on the TV screen. This  
is the factory default setting for the BDP-LX55.  
PIP Mark  
On  
Select this to display the PIP mark on the TV screen. This is the factory default  
setting for the BDP-440/BDP-140.  
Off  
Select this if you do not want to display the PIP mark on the TV screen. This  
is the factory default setting for the BDP-LX55.  
Secondary Audio Mark  
On  
Select this to display the secondary audio mark on the TV screen (page 29).  
This is the factory default setting for the BDP-440/BDP-140.  
Off  
Select this if you do not want to display the secondary audio mark on the TV  
screen. This is the factory default setting for the BDP-LX55.  
DivX(R) VOD DRM  
DVD Playback  
Registration Code  
Displays the player’s registration code required to play DivX VOD files  
(page 10).  
DVD AUDIO  
Select this to play only the audio part on the DVD-Audio disc.  
Select this to play only the video part on the DVD-Audio disc.  
* This setting is for DVD-  
Audio disc playback.  
(Except BDP-140)  
DVD VIDEO  
Internet Setting  
Permitted  
Web contents can be watched without entering the password.  
The password must be entered to watch web contents.  
No web contents can be watched.  
Partial Permitted  
Prohibited  
On  
Disc Auto Playback  
Last Memory  
Discs are played automatically after they are loaded.  
Loaded discs do not start playing automatically.  
Off  
On  
Select this to save the point at which you last stopped playback, even after the  
disc tray is opened or you switch to the standby mode.  
Off  
Select this when you want to use only Continue Viewing Play (page 33).  
PBC (Play Back Control)  
On  
Select this to play Video-CDs (version 2.0) compatible with PBC using the  
disc menu.  
Off  
Select this to play Video-CDs (version 2.0) compatible with PBC without using  
the disc menu.  
Setup Navigator  
Start making the settings using the Setup Navigator menu. For details, see page 23.  
Change Password  
Register (change) the password for parental lock settings or for unlocking to play DVD-Videos with  
the parental lock feature (page 45).  
Parental Control  
Country Code  
Change the player’s parental lock level (page 46).  
Change the Country/Area code (page 46).  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Options  
Off  
Explanation  
07  
Screen Saver  
The screen saver is not activated.  
1 min  
2 min  
3 min  
Off  
The screen saver will be activated if no operation has been performed for  
more than one minute/two minutes/three minutes. Operating the remote  
control can deactivate the screen saver.  
Auto Power Off  
Select this if you do not want the power to turn off automatically.  
10 min  
20 min  
30 min  
On  
The power will be automatically turned off if no operation has been performed  
for more than 10 minutes/20 minutes/30 minutes.  
Quick Start  
Update  
Select to shorten the required time to boot up.  
Select to perform normal bootup.  
Off  
Disc  
Select the method of software updating. (page 46)  
USB Storage  
Network  
Load Default  
Restore the settings to the factory default.  
Check the system version number.  
System Information  
Disc Auto Update  
On  
Display the software update screen when the disc with the player’s update  
file is loaded.  
Off  
The software update screen must be displayed manually. (page 46)  
BUDA  
BUDA Information Display and set up the BUDA data on the connected USB memory device.  
BUDA Setup  
43  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the video  
Setting the IP address  
07  
1
Select and set Display Setting Video Adjust   
1
Select and set Network IP setting Next  
Next Screen.  
Screen.  
Use /to select, then press ENTER.  
Use /to select, then press ENTER.  
2
Select the item and change the setting.  
2
Set IP address.  
Use /to select the item, then use /to change the  
setting. Once the setting is completed, press  
Use ///to set the IP address of the player or DNS  
server, then press ENTER.  
Auto Set IP Address  
RETURN to close the settings screen.  
On – The player’s IP address is obtained  
List of BDP-LX55 setting items  
automatically. Select this when using a broadband  
router or broadband modem that has a DHCP  
(Dynamic Host Configuration Protocol) server  
function. This player’s IP address will automatically  
be allocated from the DHCP server.  
Item  
Description  
Prog.Motion  
Adjust according to the type of image  
(moving or still image). This is effective  
mainly when outputting video materials  
as progressive images.  
Off – The player’s IP address must be set manually.  
Use the number buttons (0 to 9) to input the IP  
address, subnet mask and default gateway.  
Pure Cinema  
This setting optimizes the operation of  
the progressive scanning circuit for  
playing film materials.  
Black level  
White level  
Hue  
Adjusts the level of the black portions.  
Adjusts the level of the white portions.  
Note  
• For information on the DHCP server function, refer to  
the operating instructions for the network device.  
Adjusts the balance between green and  
red.  
• You may need to contact your Internet service  
provider or network administrator when inputting the  
IP address manually.  
Chroma Level  
Detail  
Adjusts the density of the colors.  
Adjusts the picture’s contours.  
YNR  
Reduces noise in the luminance (Y)  
signal.  
Setting the proxy server  
Only set the proxy server if so instructed by your Internet  
CNR  
Reduces noise in the chroma (C) signal.  
service provider.  
MNR  
Reduces the mosquito noise (distortion  
along the contours of the picture  
generated upon MPEG compression).  
1
Select and set Network Proxy Server Next  
Screen.  
BNR  
Reduces the block noise (block-shaped  
distortion generated upon MPEG  
compression).  
Use /to select, then press ENTER.  
2
Select and set Use or Not use at Proxy Server.  
Use /to change, then press .  
List of BDP-440/BDP-140 setting items  
Use – Select this when using a proxy server.  
Not use – Select this when not using a proxy server.  
If you have selected Use, proceed to step 3.  
Item  
Description  
Brightness  
Select this to adjust the TV screen’s  
brightness.  
3
Select and set Server Select Method.  
Contrast  
Hue  
Select this to adjust the TV screen’s  
contrast.  
Use /to change, then press .  
IP Address – Input the IP address.  
Server Name – Input the server name.  
Select this to adjust the color (green and  
red) balance of the TV screen.  
Saturation  
Select this to adjust the TV screen’s  
saturation.  
Note  
• For the BDP-LX55, the Video Adjust settings do not  
affect Blu-ray 3D pictures or the pictures of the  
VIDEO OUTPUT terminals.  
44  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Input IP Address or Server Name.  
Erasing data that has been added to  
BDs and application data  
07  
Use the number buttons (0 to 9) to input the number if you  
select IP address in step 3. Use /to move the cursor.  
Use this procedure to erase data that has been added to  
BDs (data downloaded with the BD-LIVE function and  
data used with the BONUSVIEW function) and  
application data.  
When Server Name is selected in step 3, use the number  
buttons (0 to 9) to launch the software keyboard. Now use  
///to select characters and items, then press  
ENTER to input.  
5
Input Port Number.  
Press , then use the number buttons (0 to 9) to input  
the number.  
Caution  
• Some time is required to erase the data.  
• Do not unplug the power cord while data is being  
erased.  
6
Press ENTER to set.  
Displaying the network settings  
1
Select and set BUDA BUDA Setup.  
Use /to select, then press ENTER.  
Select and set Network Information Next  
2
Select and set Fmt buda.  
Screen.  
Press ENTER.  
Use /to select, then press ENTER.  
The MAC address, IP address, subnet mask, default  
gateway and DNS server (primary and secondary)  
settings are displayed.  
Registering or Changing the  
password  
When Auto Set IP Address is set to On, the values  
obtained automatically are displayed.  
Use this procedure to register or change the code  
number required for the Parental Lock settings.  
About default password of this unit  
Note  
The default password is “0000”.  
• “0.0.0.0” is displayed when each IP address has not  
been set.  
• This unit might ask you to enter a password when you  
change the password.  
• If you reset this unit, your password is simultaneously  
changed to the default setting.  
Testing the network connection  
Select and set Network Connection Test   
1
Select and set Security Change Password   
Start.  
Next Screen.  
Use /to select, then press ENTER.  
Use /to select, then press ENTER.  
“Network is OK.” is displayed once the test is completed.  
If any other message is displayed, check the connections  
and/or settings (pages 21 and 41).  
2
Input the password.  
Use the number buttons (0 to 9) to input the number, then  
press ENTER to set.  
Changing to other language at  
Use /to move the cursor.  
language setting  
3
Re-input the password.  
Use the number buttons (0 to 9) to input the number, then  
press ENTER to set.  
1
Select and set Language.  
Use /to select, then press ENTER.  
Use /to move the cursor.  
2
Select and set OSD, Audio, Subtitle or Menu  
• To change the password, input the previously  
registered password, then input the new password.  
Use /to select, then press ENTER.  
3
Select and set the desired language.  
Use /to select, then press ENTER.  
Note  
• We recommend making a note of the password.  
Note  
• If you have forgotten the password, reset the player to  
the factory default setting, then register the password  
again (page 47).  
• If a language not recorded on the BD/DVD is set, one  
of the recorded languages is automatically selected  
and played.  
45  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Parental Lock level for  
viewing DVDs/BD-ROMs  
Some DVD-Video discs containing scenes of violence, for  
example, have Parental Lock levels (check the indications  
on the disc’s jacket or elsewhere). To restrict viewing  
these discs, set the player’s level to the level lower than  
the discs.  
Software updating  
The player’s software can be updated using one of the  
methods shown below.  
07  
• Connecting to the Internet.  
• Using a disc.  
• Using a USB memory device.  
Product information on this player is provided on the  
Pioneer website. Check the website shown on page 6 for  
update and service information on your Blu-ray disc  
player.  
1
Select and set Security Parental Control   
Next Screen.  
Use /to select, then press ENTER.  
2
Input the password.  
Use the number buttons (0 to 9) to input the number, then  
press ENTER to set.  
Caution  
• Do not unplug the power cord or remove the USB  
memory device/disc during software updating.  
Otherwise, the updating will be aborted and  
malfunction may occur with the player.  
Use /to move the cursor.  
3
Change the level.  
Use /to change, then press ENTER to set.  
• There are two processes for software updating,  
downloading and updating. Both processes may take  
a certain period of time.  
Note  
• The level can be set to Off or between Level1 and  
Level8. When set to Off, viewing is not restricted.  
• Other operations are defeated during software  
updating. Furthermore, updating process cannot be  
canceled.  
Changing the Country/Area code  
• On the BDP-LX55/BDP-440, when the front panel  
display is off, turn it on with FL DIMMER. When  
updating the player’s software with the front panel  
display off, do not unplug the power cord until the unit  
turns off.  
1
Select and set Security Country Code Next  
Screen.  
Use /to select, then press ENTER.  
2
Input the password.  
Use the number buttons (0 to 9) to input the number, then  
press ENTER to set.  
Updating connecting to the Internet  
Use /to move the cursor.  
Note  
3
Change the country/area code.  
• Depending on the Internet connection conditions,  
downloading may take a long time.  
Use /to change, then press ENTER to set. Refer to  
page 48.  
• Steps 1 to 5 are the operations performed by the user  
(they are intended to download the software from the  
Internet).  
• Steps 6 to 8 are the operations performed  
(automatically) by the player (they are intended to  
update the software).  
1
2
Connect to the Internet.  
When playback is stopped, display the Home  
Menu screen.  
Press HOME MENU.  
Select and set Initial Setup.  
3
Use /to select, then press ENTER.  
4
Select and set Options Update Network   
Start.  
Use /to select, then press ENTER.  
46  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Select and set Start.  
4
Select and set Options Update Disc or USB  
07  
Press ENTER.  
Storage Start.  
Use /to select, then press ENTER.  
6
Downloading of the software start.  
The software download status is displayed on the screen.  
5
Select and set Yes.  
Use ///to select Yes, then press ENTER.  
• Depending on the Internet connection conditions,  
software downloading may take a certain period of  
time.  
6
7
Updating starts.  
• Software updating may take a certain period of time.  
7
8
Updating starts.  
• Software updating may take a certain period of time.  
Updating completes.  
Restoring all the settings to  
the factory default settings  
Updating completes.  
This unit automatically restarts.  
Updating using a USB memory  
device/disc  
1
Check that the player’s power is turned on.  
2
When playback is stopped, display the Home  
Menu screen.  
Press HOME MENU.  
Select and set Initial Setup.  
Note  
• When an update file is provided on the Pioneer  
website, use your computer to download it onto a  
USB memory device or disc. Carefully read the  
instructions on downloading update files provided on  
the Pioneer website.  
3
Use /to select, then press ENTER.  
4
Select and set Options Load Default Next  
Screen.  
• Store the update file in the root directory of the USB  
memory device or disc. Do not store it within a folder.  
Use /to select, then press ENTER.  
5
Select and set OK.  
Use /to select, then press ENTER.  
• Do not put any files other than the update file on the  
USB memory device or disc.  
• To update using a disc, use a CD-R or CD-RW disc.  
Note  
• The player supports USB memory devices formatted  
in FAT32/16. When formatting a USB memory device  
on your computer, do so with the settings below.  
• After restoring all the settings to the factory default  
settings, use Setup Navigator to reset the player  
(page 23).  
– File system: FAT32  
• When all the settings are restored to the factory  
defaults, all the data for the secondary video (Picture-  
in-Picture), secondary audio, bookmarks, etc., is  
erased.  
– Allocation unit size: Default allocation size  
• Only store the most recent update file on the USB  
memory device or disc.  
• Do not use a USB extension cable to connect a USB  
memory device to the player. Using a USB extension  
cable may prevent the player from performing  
correctly.  
• Steps 1 to 5 are the operations performed by the user.  
• Steps 6 to 7 are the operations performed  
(automatically) by the player (they are intended to  
update the software).  
1
Plug in the USB memory device or load the disc on  
which the update file is stored.  
2
When playback is stopped, display the Home  
Menu screen.  
Press HOME MENU.  
Select and set Initial Setup.  
3
Use /to select, then press ENTER.  
47  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code Table and Country/Area Code Table  
07  
Language Code Table  
Language name, language code, input code  
Abkhazian, ab/abk, 0102  
Afar, aa/aar, 0101  
Afrikaans, af/afr, 0106  
Albanian, sq/sqi, 1917  
Amharic, am/amh, 0113  
Arabic, ar/ara, 0118  
Armenian, hy/hye, 0825  
Assamese, as/asm, 0119  
Aymara, ay/aym, 0125  
Azerbaijani, az/aze, 0126  
Bashkir, ba/bak, 0201  
Basque, eu/eus, 0521  
Belarusian, be/bel, 0205  
Bengali, bn/ben, 0214  
Bihari, bh/bih, 0208  
French, fr/fra, 0618  
Malagasy, mg/mlg, 1307  
Malay, ms/msa, 1319  
Malayalam, ml/mal, 1312  
Maltese, mt/mlt, 1320  
Maori, mi/mri, 1309  
Marathi, mr/mar, 1318  
Mongolian, mn/mon, 1314  
Moldavian, mo/mol, 1315  
Nauru, na/nau, 1401  
Nepali, ne/nep, 1405  
Norwegian, no/nor, 1415  
Occitan, oc/oci, 1503  
Oriya, or/ori, 1518  
Oromo, om/orm, 1513  
Panjabi, pa/pan, 1601  
Persian, fa/fas, 0601  
Polish, pl/pol, 1612  
Portuguese, pt/por, 1620  
Pushto, ps/pus, 1619  
Quechua, qu/que, 1721  
Romanian, ro/ron, 1815  
Romansch, rm/roh, 1813  
Rundi, rn/run, 1814  
Slovenian, sl/slv, 1912  
Somali, so/som, 1915  
Sotho, Southern, st/sot, 1920  
Spanish, es/spa, 0519  
Sundanese, su/sun, 1921  
Swahili, sw/swa, 1923  
Swati, ss/ssw, 1919  
Galician, gl/glg, 0712  
Georgian, ka/kat, 1101  
German, de/deu, 0405  
Greek, el/ell, 0512  
Guarani, gn/grn, 0714  
Gujarati, gu/guj, 0721  
Hausa, ha/hau, 0801  
Hebrew, iw/heb, 0923  
Hindi, hi/hin, 0809  
Swedish, sv/swe, 1922  
Tagalog, tl/tgl, 2012  
Tajik, tg/tgk, 2007  
Hungarian, hu/hun, 0821  
Icelandic, is/isl, 0919  
Indonesian, in/ind, 0914  
Interlingua, ia/ina, 0901  
Interlingue, ie/ile, 0905  
Inupiaq, ik/ipk, 0911  
Irish, ga/gle, 0701  
Tamil, ta/tam, 2001  
Tatar, tt/tat, 2020  
Telugu, te/tel, 2005  
Thai, th/tha, 2008  
Tibetan, bo/bod, 0215  
Tigrinya, ti/tir, 2009  
Bislama, bi/bis, 0209  
Breton, br/bre, 0218  
Bulgarian, bg/bul, 0207  
Burmese, my/mya, 1325  
Catalan, ca/cat, 0301  
Central Khmer, km/khm, 1113  
Chinese, zh/zho, 2608  
Corsican, co/cos, 0315  
Croatian, hr/hrv, 0818  
Czech, cs/ces, 0319  
Tonga (Tonga Islands), to/ton, 2015  
Tsonga, ts/tso, 2019  
Tswana, tn/tsn, 2014  
Turkmen, tk/tuk, 2011  
Turkish, tr/tur, 2018  
Twi, tw/twi, 2023  
Italian, it/ita, 0920  
Japanese, ja/jpn, 1001  
Javanese, jw/jav, 1023  
Kalaallisut, kl/kal, 1112  
Kannada, kn/kan, 1114  
Kashmiri, ks/kas, 1119  
Kazakh, kk/kaz, 1111  
Kinyarwanda, rw/kin, 1823  
Kirghiz, ky/kir, 1125  
Korean, ko/kor, 1115  
Kurdish, ku/kur, 1121  
Lao, lo/lao, 1215  
Ukrainian, uk/ukr, 2111  
Urdu, ur/urd, 2118  
Russian, ru/rus, 1821  
Samoan, sm/smo, 1913  
Sango, sg/sag, 1907  
Sanskrit, sa/san, 1901  
Scottish Gaelic, gd/gla, 0704  
Serbian, sr/srp, 1918  
Serbo-Croatian, sh/---, 1908  
Shona, sn/sna, 1914  
Uzbek, uz/uzb, 2126  
Vietnamese, vi/vie, 2209  
Volapük, vo/vol, 2215  
Welsh, cy/cym, 0325  
Western Frisian, fy/fry, 0625  
Wolof, wo/wol, 2315  
Xhosa, xh/xho, 2408  
Yiddish, ji/yid, 1009  
Yoruba, yo/yor, 2515  
Zulu, zu/zul, 2621  
Danish, da/dan, 0401  
Dutch, nl/nld, 1412  
Dzongkha, dz/dzo, 0426  
English, en/eng, 0514  
Esperanto, eo/epo, 0515  
Estonian, et/est, 0520  
Finnish, fi/fin, 0609  
Latin, la/lat, 1201  
Latvian, lv/lav, 1222  
Lingala, ln/lin, 1214  
Lithuanian, lt/lit, 1220  
Macedonian, mk/mkd, 1311  
Sindhi, sd/snd, 1904  
Sinhalese, si/sin, 1909  
Slovak, sk/slk, 1911  
Fijian, fj/fij, 0610  
Faroese, fo/fao, 0615  
Country/Area Code Table  
Country/Area name, Country/Area code, input code  
Anguilla, ai, 0109  
Estonia, ee, 0505  
Finland, fi, 0609  
France, fr, 0618  
Georgia, ge, 0705  
Germany, de, 0405  
Greece, gr, 0718  
Greenland, gl, 0712  
Grenada, gd, 0704  
Guyana, gy, 0725  
Haiti, ht, 0820  
Luxembourg, lu, 1221  
Slovakia, sk, 1911  
Antigua and Barbuda, ag, 0107  
Argentina, ar, 0118  
Armenia, am, 0113  
Australia, au, 0121  
Austria, at, 0120  
Macedonia, the Former Yugoslav Slovenia, si, 1909  
Republic of, mk, 1311  
Malaysia, my, 1325  
Malta, mt, 1320  
Mexico, mx, 1324  
Moldova, Republic of, md, 1304  
Monaco, mc, 1303  
Spain, es, 0519  
Suriname, sr, 1918  
Sweden, se, 1905  
Switzerland, ch, 0308  
Taiwan, Province of China, tw, 2023  
Tajikistan, tj, 2010  
Azerbaijan, az, 0126  
Bahamas, bs, 0219  
Barbados, bb, 0202  
Belarus, by, 0225  
Montserrat, ms, 1319  
Netherlands, nl, 1412  
New Zealand, nz, 1426  
Norway, no, 1415  
Thailand, th, 2008  
Trinidad and Tobago, tt, 2020  
Tunisia, tn, 2014  
Belgium, be, 0205  
Belize, bz, 0226  
Hong Kong, hk, 0811  
Hungary, hu, 0821  
Iceland, is, 0919  
India, in, 0914  
Turkey, tr, 2018  
Bermuda, bm, 0213  
Brazil, br, 0218  
Pakistan, pk, 1611  
Peru, pe, 1605  
Turkmenistan, tm, 2013  
Turks and Caicos Islands, tc, 2003  
Ukraine, ua, 2101  
Bulgaria, bg, 0207  
Canada, ca, 0301  
Indonesia, id, 0904  
Ireland, ie, 0905  
Philippines, ph, 1608  
Poland, pl, 1612  
United Kingdom, gb, 0702  
United States, us, 2119  
Uruguay, uy, 2125  
Uzbekistan, uz, 2126  
Venezuela, ve, 2205  
Virgin Islands, British, vg, 2207  
Cayman Islands, ky, 1125  
Chile, cl, 0312  
Israel, il, 0912  
Italy, it, 0920  
Portugal, pt, 1620  
Puerto Rico, pr, 1618  
Romania, ro, 1815  
China, cn, 0314  
Jamaica, jm, 1013  
Japan, jp, 1016  
Colombia, co, 0315  
Croatia, hr, 0818  
Russian Federation, ru, 1821  
Saint Kitts and Nevis, kn, 1114  
Saint Lucia, lc, 1203  
Saint Vincent and the  
Grenadines, vc, 2203  
San Marino, sm, 1913  
Singapore, sg, 1907  
Kazakhstan, kz, 1126  
Korea, Republic of, kr, 1118  
Kyrgyzstan, kg, 1107  
Latvia, lv, 1222  
Cyprus, cy, 0325  
Czech Republic, cz, 0326  
Denmark, dk, 0411  
Dominica, dm, 0413  
Dominican Republic, do, 0415  
Liechtenstein, li, 1209  
Lithuania, lt, 1220  
48  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 8  
08  
Additional information  
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
The implementation was written so as to conform with  
Netscapes SSL.  
Software  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR  
This library is free for commercial and non-commercial use  
as long as the following conditions are aheared to. The  
following conditions apply to all code found in this  
distribution, be it the RC4, RSA, lhash, DES, etc., code; not  
just the SSL code. The SSL documentation included with  
this distribution is covered by the same copyright terms  
except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young's, and as such any Copyright  
notices in the code are not to be removed. If this package is  
used in a product, Eric Young should be given attribution as  
the author of the parts of the library used. This can be in the  
form of a textual message at program startup or in  
documentation (online or textual) provided with the  
package.  
Redistribution and use in source and binary forms, with or  
without modification, are permitted provided that the  
following conditions are met:  
1. Redistributions of source code must retain the  
copyright notice, this list of conditions and the following  
disclaimer.  
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY  
RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER  
OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR  
license Notice  
The licenses for the open source  
software used on this player are  
shown below. For accuracy purposes,  
here we have included the original  
texts (in English).  
ANY CLAIM, OR ANY SPECIAL INDIRECT OR  
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES  
WHATSOEVER RESULTING FROM LOSS OF USE, DATA  
OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,  
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING  
OUT OF OR IN CONNECTION WITH THE USE OR  
PERFORMANCE OF THIS SOFTWARE.  
Except as contained in this notice, the name of a copyright  
holder shall not be used in advertising or otherwise to  
promote the sale, use or other dealings in this Software  
without prior written authorization of the copyright holder.  
curl  
COPYRIGHT AND PERMISSION NOTICE  
Copyright © 1996 - 2007, Daniel Stenberg,  
<[email protected]>. All rights reserved.  
jpeg  
Permission to use, copy, modify, and distribute this  
software for any purpose with or without fee is hereby  
granted, provided that the above copyright notice and this  
permission notice appear in all copies.  
This software is based in part on the work of the  
independent JPEG Group.  
2. Redistributions in binary form must reproduce the  
above copyright notice, this list of conditions and the  
following disclaimer in the documentation and/or other  
materials provided with the distribution.  
3. All advertising materials mentioning features or use of  
this software must display the following  
openssl  
The OpenSSL toolkit stays under a dual license, i.e. both the  
conditions of the OpenSSL License and the original SSLeay  
license apply to the toolkit.  
See below for the actual license texts. Actually both  
licenses are BSD-style Open Source licenses. In case of any  
license issues related to OpenSSL please contact openssl-  
OpenSSL License  
Copyright (c) 1998-2008 The OpenSSL Project. All rights  
reserved.  
Redistribution and use in source and binary forms, with or  
without modification, are permitted provided that the  
following conditions are met:  
1. Redistributions of source code must retain the above  
copyright notice, this list of conditions and the following  
disclaimer.  
THE SOF TWARE IS PROVIDED "AS IS" , WI THOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY  
RIGHTS. IN NO EVENT SHALL THE AUTHORS OR  
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,  
DAMAGES OR OTHER LIABILITY, WHETHER IN AN  
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING  
FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE  
SOFTWARE.  
acknowledgement:  
"This product includes cryptographic software written  
by Eric Young ([email protected])" The word  
'cryptographic' can be left out if the rouines from the  
library being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a  
derivative thereof) from the apps directory (application  
code) you must include an acknowledgement:  
"This product includes software written by Tim Hudson  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS''  
AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO  
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE  
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER  
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGE.  
Except as contained in this notice, the name of a copyright  
holder shall not be used in advertising or otherwise to  
promote the sale, use or other dealings in this Software  
without prior written authorization of the copyright holder.  
2. Redistributions in binary form must reproduce the  
above copyright notice, this list of conditions and the  
following disclaimer in the documentation and/or other  
materials provided with the distribution.  
3. All advertising materials mentioning features or use of  
this software must display the following  
expat  
Copyright (c) 1998, 1999, 2000 Thai Open Source Software  
Center Ltd  
Permission is hereby granted, free of charge, to any person  
obtaining a copy of this software and associated  
documentation files (the "Software"), to deal in the Software  
without restriction, including without limitation the rights  
to use, copy, modify, merge, publish, distribute, sublicense,  
and/or sell copies of the Software, and to permit persons to  
whom the Software is furnished to do so, subject to the  
following conditions:  
The above copyright notice and this permission notice shall  
be included in all copies or substantial portions of the  
Software.  
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT.  
acknowledgment:  
"This product includes software developed by the  
OpenSSL Project for use in the OpenSSL Toolkit. (http:/  
/www.openssl.org/)"  
4. The names "OpenSSL Toolkit" and "OpenSSL Project"  
must not be used to endorse or promote products  
derived from this software without prior written  
permission. For written permission, please contact  
5. Products derived from this software may not be called  
"OpenSSL" nor may "OpenSSL" appear in their names  
without prior written permission of the OpenSSL  
Project.  
6. Redistributions of any form whatsoever must retain the  
following acknowledgment:  
The licence and distribution terms for any publically  
available version or derivative of this code cannot be  
changed. i.e. this code cannot simply be copied and put  
under another distribution licence [including the GNU  
Public Licence.]  
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT  
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR  
OTHER LIABILITY, WHETHER IN AN ACTION OF  
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT  
OF OR IN CONNECTION WITH THE SOFTWARE OR THE  
USE OR OTHER DEALINGS IN THE SOFTWARE.  
zlib  
for information.  
"This product includes software developed by the  
OpenSSL Project for use in the OpenSSL Toolkit (http://  
www.openssl.org/)"  
GNU General Public License and  
GNU Lesser General Public License  
This product includes the following software licensed for  
use under the terms of GNU General  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL  
PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL  
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY  
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,  
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGE.  
freetype  
This software is based in part on freetype see http://  
Public License v2, GNU Lesser General Public License v2.1.  
linux kernel 2.6. Copyright (C) 1991 Linus Torvalds.  
Licensed under GPLv2.0  
BusyBox v1.17.1 multi-call binary. Copyright (C) 1998-  
2009 Erik Andersen, Rob Landley, Denys Vlasenko and  
others. Licensed under GPLv2.0  
International Components for  
Unicode  
ICU License - ICU 1.8.1 and later  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1995-2010 International Business Machines  
Corporation and others  
All rights reserved.  
Permission is hereby granted, free of charge, to any person  
obtaining a copy of this software and associated  
documentation files (the "Software"), to deal in the Software  
without restriction, including without limitation the rights  
to use, copy, modify, merge, publish, distribute, and/or sell  
copies of the Software, and to permit persons to whom the  
Software is furnished to do so, provided that the above  
copyright notice(s) and this permission notice appear in all  
copies of the Software and that both the above copyright  
notice(s) and this permission notice appear in supporting  
documentation.  
SquashFS Copyright: (C) 2002-2009 Phillip Lougher  
Licensed under GPL v2.0  
Das U-Boot Copyright: (C) 2000-2005 Wolfang Denk,  
DENX Software Engineering, [email protected]. Licensed  
under GPL v2.0  
LIRC 0.8.5 Copyright (C) 1996 Ralph Metzler  
<[email protected]> Copyright (C) 1998-2008  
Christoph Bartelmus <[email protected]> Licensed  
under GPL v2.0  
This product includes cryptographic software written by  
Eric Young ([email protected]). This product includes  
software written by Tim Hudson ([email protected]).  
Original SSLeay License  
Copyright (C) 1995-1998 Eric Young ([email protected])  
All rights reserved.  
glibc 2.9 Copyright (C) 1992-2006, 2007 Free Software  
Foundation, Inc. Licensed under LGPL v2.1.  
You can get corresponding open source code from the  
following URL.  
This package is an SSL implementation written by Eric  
Young ([email protected]).  
49  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please refer to the following URL for further information of  
GNU General Public License Version 2.  
Please refer to the following URL for further information of  
GNU Library General Public License Version 2.1.  
2. You may modify your copy or copies of the Program or  
any portion of it, thus forming a work based on the  
Program, and copy and distribute such modifications or  
work under the terms of Section 1 above, provided that  
you also meet all of these conditions:  
a) You must cause the modified files to carry prominent  
notices stating that you changed the files and the  
date of any change.  
b) You must cause any work that you distribute or  
publish, that in whole or in part contains or is derived  
from the Program or any part thereof, to be licensed  
as a whole at no charge to all third parties under the  
terms of this License.  
c) If the modified program normally reads commands  
interactively when run, you must cause it, when  
started running for such interactive use in the most  
ordinary way, to print or display an announcement  
including an appropriate copyright notice and a  
notice that there is no warranty (or else, saying that  
you provide a warranty) and that users may  
5. You are not required to accept this License, since you  
have not signed it. However, nothing else grants you  
permission to modify or distribute the Program or its  
derivative works. These actions are prohibited by law if  
you do not accept this License. Therefore, by modifying  
or distributing the Program (or any work based on the  
Program), you indicate your acceptance of this License  
to do so, and all its terms and conditions for copying,  
distributing or modifying the Program or works based  
on it.  
08  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim  
copies of this license document, but changing it is not  
allowed.  
6
Each time you redistribute the Program (or any work  
based on the Program), the recipient automatically  
receives a license from the original licensor to copy,  
distribute or modify the Program subject to these terms  
and conditions. You may not impose any further  
restrictions on the recipients' exercise of the rights  
granted herein. You are not responsible for enforcing  
compliance by third parties to this License.  
Preamble  
The licenses for most software are designed to take away  
your freedom to share and change it. By contrast, the GNU  
General Public License is intended to guarantee your  
freedom to share and change free software--to make sure  
the software is free for all its users. This General Public  
License applies to most of the Free Software Foundation's  
software and to any other program whose authors commit  
to using it. (Some other Free Software Foundation software  
is covered by the GNU Lesser General Public License  
instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to  
freedom, not price. Our General Public Licenses are  
designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this  
service if you wish), that you receive source code or can get  
it if you want it, that you can change the software or use  
pieces of it in new free programs; and that you know you  
can do these things.  
To protect your rights, we need to make restrictions that  
forbid anyone to deny you these rights or to ask you to  
surrender the rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of the  
software, or if you modify it.  
For example, if you distribute copies of such a program,  
whether gratis or for a fee, you must give the recipients all  
the rights that you have. You must make sure that they, too,  
receive or can get the source code. And you must show  
them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the  
software, and (2) offer you this license which gives you legal  
permission to copy, distribute and/or modify the software.  
Also, for each author's protection and ours, we want to  
make certain that everyone understands that there is no  
warranty for this free software. If the software is modified  
by someone else and passed on, we want its recipients to  
know that what they have is not the original, so that any  
problems introduced by others will not reflect on the  
original authors' reputations.  
Finally, any free program is threatened constantly by  
software patents. We wish to avoid the danger that  
redistributors of a free program will individually obtain  
patent licenses, in effect making the program proprietary.  
To prevent this, we have made it clear that any patent must  
be licensed for everyone's free use or not licensed at all.  
The precise terms and conditions for copying, distribution  
and modification follow.  
7. If, as a consequence of a court judgment or allegation  
of patent infringement or for any other reason (not  
limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that  
contradict the conditions of this License, they do not  
excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your  
obligations under this License and any other pertinent  
obligations, then as a consequence you may not  
distribute the Program at all. For example, if a patent  
license would not permit royalty-free redistribution of  
the Program by all those who receive copies directly or  
indirectly through you, then the only way you could  
satisfy both it and this License would be to refrain  
entirely from distribution of the Program.  
If any portion of this section is held invalid or  
unenforceable under any particular circumstance, the  
balance of the section is intended to apply and the  
section as a whole is intended to apply in other  
circumstances.  
It is not the purpose of this section to induce you to  
infringe any patents or other property right claims or to  
contest validity of any such claims; this section has the  
sole purpose of protecting the integrity of the free  
software distribution system, which is implemented by  
public license practices. Many people have made  
generous contributions to the wide range of software  
distributed through that system in reliance on  
consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to  
distribute software through any other system and a  
licensee cannot impose that choice.  
redistribute the program under these conditions, and  
telling the user how to view a copy of this License.  
(Exception: if the Program itself is interactive but  
does not normally print such an announcement, your  
work based on the Program is not required to print an  
announcement.)  
These requirements apply to the modified work as a whole.  
If identifiable sections of that work are not derived from the  
Program, and can be reasonably considered independent  
and separate works in themselves, then this License, and  
its terms, do not apply to those sections when you  
distribute them as separate works. But when you distribute  
the same sections as part of a whole which is a work based  
on the Program, the distribution of the whole must be on  
the terms of this License, whose permissions for other  
licensees extend to the entire whole, and thus to each and  
every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or  
contest your rights to work written entirely by you; rather,  
the intent is to exercise the right to control the distribution  
of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on  
the Program with the Program (or with a work based on the  
Program) on a volume of a storage or distribution medium  
does not bring the other work under the scope of this  
License.  
3. You may copy and distribute the Program (or a work  
based on it, under Section 2) in object code or  
executable form under the terms of Sections 1 and 2  
above provided that you also do one of the following:  
a) Accompany it with the complete corresponding  
machine-readable source code, which must be  
distributed under the terms of Sections 1 and 2 above  
on a medium customarily used for software  
This section is intended to make thoroughly clear what  
is believed to be a consequence of the rest of this  
License.  
8. If the distribution and/or use of the Program is  
restricted in certain countries either by patents or by  
copyrighted interfaces, the original copyright holder  
who places the Program under this License may add an  
explicit geographical distribution limitation excluding  
those countries, so that distribution is permitted only in  
or among countries not thus excluded. In such case,  
this License incorporates the limitation as if written in  
the body of this License.  
9. The Free Software Foundation may publish revised and/  
or new versions of the General Public License from time  
to time. Such new versions will be similar in spirit to the  
present version, but may differ in detail to address new  
problems or concerns.  
Each version is given a distinguishing version number.  
If the Program specifies a version number of this  
License which applies to it and "any later version", you  
have the option of following the terms and conditions  
either of that version or of any later version published by  
the Free Software Foundation. If the Program does not  
specify a version number of this License, you may  
choose any version ever published by the Free Software  
Foundation.  
10. If you wish to incorporate parts of the Program into  
other free programs whose distribution conditions are  
different, write to the author to ask for permission. For  
software which is copyrighted by the Free Software  
Foundation, write to the Free Software Foundation; we  
sometimes make exceptions for this. Our decision will  
be guided by the two goals of preserving the free status  
of all derivatives of our free software and of promoting  
the sharing and reuse of software generally.  
interchange; or,  
b) Accompany it with a written offer, valid for at least  
three years, to give any third party, for a charge no  
more than your cost of physically performing source  
distribution, a complete machine-readable copy of  
the corresponding source code, to be distributed  
under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange;  
or,  
c) Accompany it with the information you received as to  
the offer to distribute corresponding source code.  
(This alternative is allowed only for noncommercial  
distribution and only if you received the program in  
object code or executable form with such an offer, in  
accord with Subsection b above.)  
The source code for a work means the preferred form of the  
work for making modifications to it. For an executable  
work, complete source code means all the source code for  
all modules it contains, plus any associated interface  
definition files, plus the scripts used to control compilation  
and installation of the executable. However, as a special  
exception, the source code distributed need not include  
anything that is normally distributed (in either source or  
binary form) with the major components (compiler, kernel,  
and so on) of the operating system on which the executable  
runs, unless that component itself accompanies the  
executable.  
If distribution of executable or object code is made by  
offering access to copy from a designated place, then  
offering equivalent access to copy the source code from the  
same place counts as distribution of the source code, even  
though third parties are not compelled to copy the source  
along with the object code.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION  
AND MODIFICATION  
0. This License applies to any program or other work  
which contains a notice placed by the copyright holder  
saying it may be distributed under the terms of this  
General Public License. The "Program", below, refers to  
any such program or work, and a "work based on the  
Program" means either the Program or any derivative  
work under copyright law: that is to say, a work  
containing the Program or a portion of it, either  
verbatim or with modifications and/or translated into  
another language. (Hereinafter, translation is included  
without limitation in the term "modification".) Each  
licensee is addressed as "you".  
Activities other than copying, distribution and  
modification are not covered by this License; they are  
outside its scope. The act of running the Program is not  
restricted, and the output from the Program is covered  
only if its contents constitute a work based on the  
Program (independent of having been made by running  
the Program). Whether that is true depends on what the  
Program does.  
1. You may copy and distribute verbatim copies of the  
Program's source code as you receive it, in any  
medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate  
copyright notice and disclaimer of warranty; keep intact  
all the notices that refer to this License and to the  
absence of any warranty; and give any other recipients  
of the Program a copy of this License along with the  
Program.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF  
CHARGE, THERE IS NO WARRANTY FOR THE  
PROGRAM, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS AND/  
OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"  
WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
4. You may not copy, modify, sublicense, or distribute the  
Program except as expressly provided under this  
License. Any attempt otherwise to copy, modify,  
sublicense or distribute the Program is void, and will  
automatically terminate your rights under this License.  
However, parties who have received copies, or rights,  
from you under this License will not have their licenses  
terminated so long as such parties remain in full  
compliance.  
You may charge a fee for the physical act of transferring  
a copy, and you may at your option offer warranty  
protection in exchange for a fee.  
50  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE  
QUALITY AND PERFORMANCE OF THE PROGRAM IS  
WITH YOU. SHOULD THE PROGRAM PROVE  
DEFECTIVE, YOU ASSUME THE COST OF ALL  
NECESSARY SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE  
LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO  
MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM  
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR  
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OR INABILITY TO USE THE  
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE  
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES  
OR A FAILURE OF THE PROGRAM TO OPERATE WITH  
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR  
OTHER PARTY HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
freedom to share and change free software--to make sure  
the software is free for all its users.  
derived from the library, whereas the latter must be  
combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION  
08  
This license, the Lesser General Public License, applies to  
some specially designated software packages--typically  
libraries--of the Free Software Foundation and other  
authors who decide to use it. You can use it too, but we  
suggest you first think carefully about whether this license  
or the ordinary General Public License is the better strategy  
to use in any particular case, based on the explanations  
below.  
When we speak of free software, we are referring to  
freedom of use, not price. Our General Public Licenses are  
designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this  
service if you wish); that you receive source code or can get  
it if you want it; that you can change the software and use  
pieces of it in new free programs; and that you are informed  
that you can do these things.  
To protect your rights, we need to make restrictions that  
forbid distributors to deny you these rights or to ask you to  
surrender these rights. These restrictions translate to  
certain responsibilities for you if you distribute copies of the  
library or if you modify it.  
For example, if you distribute copies of the library, whether  
gratis or for a fee, you must give the recipients all the rights  
that we gave you. You must make sure that they, too,  
receive or can get the source code. If you link other code  
with the library, you must provide complete object files to  
the recipients, so that they can relink them with the library  
after making changes to the library and recompiling it. And  
you must show them these terms so they know their rights.  
We protect your rights with a two-step method: (1) we  
copyright the library, and (2) we offer you this license,  
which gives you legal permission to copy, distribute and/or  
modify the library.  
To protect each distributor, we want to make it very clear  
that there is no warranty for the free library. Also, if the  
library is modified by someone else and passed on, the  
recipients should know that what they have is not the  
original version, so that the original author's reputation will  
not be affected by problems that might be introduced by  
others.  
Finally, software patents pose a constant threat to the  
existence of any free program. We wish to make sure that  
a company cannot effectively restrict the users of a free  
program by obtaining a restrictive license from a patent  
holder. Therefore, we insist that any patent license  
obtained for a version of the library must be consistent with  
the full freedom of use specified in this license.  
Most GNU software, including some libraries, is covered by  
the ordinary GNU General Public License. This license, the  
GNU Lesser General Public License, applies to certain  
designated libraries, and is quite different from the ordinary  
General Public License. We use this license for certain  
libraries in order to permit linking those libraries into non-  
free programs.  
When a program is linked with a library, whether statically  
or using a shared library, the combination of the two is  
legally speaking a combined work, a derivative of the  
original library. The ordinary General Public License  
therefore permits such linking only if the entire  
AND MODIFICATION  
0. This License Agreement applies to any software library  
or other program which contains a notice placed by the  
copyright holder or other authorized party saying it may  
be distributed under the terms of this Lesser General  
Public License (also called "this License"). Each  
licensee is addressed as "you".  
A "library" means a collection of software functions and/  
or data prepared so as to be conveniently linked with  
application programs (which use some of those  
functions and data) to form executables.  
The "Library", below, refers to any such software library  
or work which has been distributed under these terms.  
A "work based on the Library" means either the Library  
or any derivative work under copyright law: that is to say,  
a work containing the Library or a portion of it, either  
verbatim or with modifications and/or translated  
straightforwardly into another language. (Hereinafter,  
translation is included without limitation in the term  
"modification".)  
"Source code" for a work means the preferred form of  
the work for making modifications to it. For a library,  
complete source code means all the source code for all  
modules it contains, plus any associated interface  
definition files, plus the scripts used to control  
compilation and installation of the library.  
Activities other than copying, distribution and  
modification are not covered by this License; they are  
outside its scope. The act of running a program using  
the Library is not restricted, and output from such a  
program is covered only if its contents constitute a work  
based on the Library (independent of the use of the  
Library in a tool for writing it). Whether that is true  
depends on what the Library does and what the  
program that uses the Library does.  
1. You may copy and distribute verbatim copies of the  
Library's complete source code as you receive it, in any  
medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate  
copyright notice and disclaimer of warranty; keep intact  
all the notices that refer to this License and to the  
absence of any warranty; and distribute a copy of this  
License along with the Library.  
You may charge a fee for the physical act of transferring  
a copy, and you may at your option offer warranty  
protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any  
portion of it, thus forming a work based on the Library,  
and copy and distribute such modifications or work  
under the terms of Section 1 above, provided that you  
also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent  
notices stating that you changed the files and the  
date of any change.  
c) You must cause the whole of the work to be licensed  
at no charge to all third parties under the terms of  
this License.  
d) If a facility in the modified Library refers to a function  
or a table of data to be supplied by an application  
program that uses the facility, other than as an  
argument passed when the facility is invoked, then  
you must make a good faith effort to ensure that, in  
the event an application does not supply such  
function or table, the facility still operates, and  
performs whatever part of its purpose remains  
meaningful.  
(For example, a function in a library to compute  
square roots has a purpose that is entirely well-  
defined independent of the application. Therefore,  
Subsection 2d requires that any application-supplied  
function or table used by this function must be  
optional: if the application does not supply it, the  
square root function must still compute square  
roots.)  
These requirements apply to the modified work as a  
whole. If identifiable sections of that work are not  
derived from the Library, and can be reasonably  
considered independent and separate works in  
themselves, then this License, and its terms, do not  
apply to those sections when you distribute them as  
separate works. But when you distribute the same  
sections as part of a whole which is a work based on the  
Library, the distribution of the whole must be on the  
terms of this License, whose permissions for other  
licensees extend to the entire whole, and thus to each  
and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or  
contest your rights to work written entirely by you;  
rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on  
the Library.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the  
greatest possible use to the public, the best way to achieve  
this is to make it free software which everyone can  
redistribute and change under these terms.  
To do so, attach the following notices to the program. It is  
safest to attach them to the start of each source file to most  
effectively convey the exclusion of warranty; and each file  
should have at least the "copyright" line and a pointer to  
where the full notice is found.  
<one line to give the program's name and a brief idea  
of what it does.>  
Copyright (C) <year> <name of author>  
This program is free software; you can redistribute it  
and/or modify it under the terms of the GNU General  
Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your  
option) any later version.  
This program is distributed in the hope that it will be  
useful, but WITHOUT ANY WARRANTY; without even  
the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. See the GNU General  
Public License for more details.  
You should have received a copy of the GNU General  
Public License along with this program; if not, write to  
the Free Software Foundation, Inc., 51 Franklin Street,  
Fifth Floor, Boston, MA 02110-1301 USA.  
Also add information on how to contact you by electronic  
and paper mail.  
If the program is interactive, make it output a short notice  
like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright (C) year name of  
author  
Gnomovision comes with ABSOLUTELY NO  
WARRANTY; for details type `show w'.  
This is free software, and you are welcome to  
redistribute it under certain conditions; type `show c'  
for details.  
The hypothetical commands `show w' and `show c' should  
show the appropriate parts of the General Public License.  
Of course, the commands you use may be called  
something other than `show w' and `show c'; they could  
even be mouse-clicks or menu items--whatever suits your  
program.  
You should also get your employer (if you work as a  
programmer) or your school, if any, to sign a "copyright  
disclaimer" for the program, if necessary. Here is a sample;  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in  
the program  
combination fits its criteria of freedom. The Lesser General  
Public License permits more lax criteria for linking other  
code with the library.  
We call this license the "Lesser" General Public License  
because it does Less to protect the user's freedom than the  
ordinary General Public License. It also provides other free  
software developers Less of an advantage over competing  
non-free programs. These disadvantages are the reason we  
use the ordinary General Public License for many libraries.  
However, the Lesser license provides advantages in certain  
special circumstances.  
For example, on rare occasions, there may be a special  
need to encourage the widest possible use of a certain  
library, so that it becomes a de-facto standard. To achieve  
this, non-free programs must be allowed to use the library.  
A more frequent case is that a free library does the same  
job as widely used non-free libraries. In this case, there is  
little to gain by limiting the free library to free software only,  
so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-  
free programs enables a greater number of people to use a  
large body of free software. For example, permission to use  
the GNU C Library in non-free programs enables many  
more people to use the whole GNU operating system, as  
well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less  
protective of the users' freedom, it does ensure that the  
user of a program that is linked with the Library has the  
freedom and the wherewithal to run that program using a  
modified version of the Library.  
`Gnomovision' (which makes passes at compilers)  
written by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating  
your program into proprietary programs. If your program is  
a subroutine library, you may consider it more useful to  
permit linking proprietary applications with the library. If  
this is what you want to do, use the GNU Lesser General  
Public License instead of this License.  
GNU LESSER GENERAL PUBLICLICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim  
copies of this license document, but changing it is not  
allowed.  
[This is the first released version of the Lesser GPL. It also  
counts as the successor of the GNU Library Public License,  
version 2, hence the version number 2.1.]  
The precise terms and conditions for copying, distribution  
and modification follow. Pay close attention to the  
difference between a "work based on the library" and a  
"work that uses the library". The former contains code  
Preamble  
The licenses for most software are designed to take away  
your freedom to share and change it. By contrast, the GNU  
General Public Licenses are intended to guarantee your  
51  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In addition, mere aggregation of another work not  
based on the Library with the Library (or with a work  
based on the Library) on a volume of a storage or  
distribution medium does not bring the other work  
under the scope of this License.  
b) Use a suitable shared library mechanism for linking  
with the Library. A suitable mechanism is one that (1)  
uses at run time a copy of the library already present  
on the user's computer system, rather than copying  
library functions into the executable, and (2) will  
operate properly with a modified version of the library,  
if the user installs one, as long as the modified  
version is interface-compatible with the version that  
the work was made with.  
c) Accompany the work with a written offer, valid for at  
least three years, to give the same user the materials  
specified in Subsection 6a, above, for a charge no  
more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access  
to copy from a designated place, offer equivalent  
access to copy the above specified materials from the  
same place.  
It is not the purpose of this section to induce you to  
infringe any patents or other property right claims or to  
contest validity of any such claims; this section has the  
sole purpose of protecting the integrity of the free  
software distribution system which is implemented by  
public license practices. Many people have made  
generous contributions to the wide range of software  
distributed through that system in reliance on  
consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to  
distribute software through any other system and a  
licensee cannot impose that choice.  
08  
3. You may opt to apply the terms of the ordinary GNU  
General Public License instead of this License to a given  
copy of the Library. To do this, you must alter all the  
notices that refer to this License, so that they refer to the  
ordinary GNU General Public License, version 2, instead  
of to this License. (If a newer version than version 2 of  
the ordinary GNU General Public License has appeared,  
then you can specify that version instead if you wish.)  
Do not make any other change in these notices.  
Once this change is made in a given copy, it is  
irreversible for that copy, so the ordinary GNU General  
Public License applies to all subsequent copies and  
derivative works made from that copy.  
This option is useful when you wish to copy part of the  
code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or  
derivative of it, under Section 2) in object code or  
executable form under the terms of Sections 1 and 2  
above provided that you accompany it with the  
complete corresponding machine-readable source  
code, which must be distributed under the terms of  
Sections 1 and 2 above on a medium customarily used  
for software interchange.  
If distribution of object code is made by offering access  
to copy from a designated place, then offering  
equivalent access to copy the source code from the  
same place satisfies the requirement to distribute the  
source code, even though third parties are not  
compelled to copy the source along with the object  
code.  
5. A program that contains no derivative of any portion of  
the Library, but is designed to work with the Library by  
being compiled or linked with it, is called a "work that  
uses the Library". Such a work, in isolation, is not a  
derivative work of the Library, and therefore falls outside  
the scope of this License.  
However, linking a "work that uses the Library" with the  
Library creates an executable that is a derivative of the  
Library (because it contains portions of the Library),  
rather than a "work that uses the library". The  
executable is therefore covered by this License. Section  
6 states terms for distribution of such executables.  
When a "work that uses the Library" uses material from  
a header file that is part of the Library, the object code  
for the work may be a derivative work of the Library even  
though the source code is not. Whether this is true is  
especially significant if the work can be linked without  
the Library, or if the work is itself a library. The threshold  
for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters,  
data structure layouts and accessors, and small  
macros and small inline functions (ten lines or less in  
length), then the use of the object file is unrestricted,  
regardless of whether it is legally a derivative work.  
(Executables containing this object code plus portions  
of the Library will still fall under Section 6.)  
This section is intended to make thoroughly clear what  
is believed to be a consequence of the rest of this  
License.  
12. If the distribution and/or use of the Library is restricted  
in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the  
Library under this License may add an explicit  
geographical distribution limitation excluding those  
countries, so that distribution is permitted only in or  
among countries not thus excluded. In such case, this  
License incorporates the limitation as if written in the  
body of this License.  
13. The Free Software Foundation may publish revised and/  
or new versions of the Lesser General Public License  
from time to time. Such new versions will be similar in  
spirit to the present version, but may differ in detail to  
address new problems or concerns.  
Each version is given a distinguishing version number.  
If the Library specifies a version number of this License  
which applies to it and "any later version", you have the  
option of following the terms and conditions either of  
that version or of any later version published by the Free  
Software Foundation. If the Library does not specify a  
license version number, you may choose any version  
ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other  
free programs whose distribution conditions are  
incompatible with these, write to the author to ask for  
permission. For software which is copyrighted by the  
Free Software Foundation, write to the Free Software  
Foundation; we sometimes make exceptions for this.  
Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free  
software and of promoting the sharing and reuse of  
software generally.  
e) Verify that the user has already received a copy of  
these materials or that you have already sent this  
user a copy.  
For an executable, the required form of the "work that  
uses the Library" must include any data and utility  
programs needed for reproducing the executable from  
it. However, as a special exception, the materials to be  
distributed need not include anything that is normally  
distributed (in either source or binary form) with the  
major components (compiler, kernel, and so on) of the  
operating system on which the executable runs, unless  
that component itself accompanies the executable.  
It may happen that this requirement contradicts the  
license restrictions of other proprietary libraries that do  
not normally accompany the operating system. Such a  
contradiction means you cannot use both them and the  
Library together in an executable that you distribute.  
7. You may place library facilities that are a work based on  
the Library side-by-side in a single library together with  
other library facilities not covered by this License, and  
distribute such a combined library, provided that the  
separate distribution of the work based on the Library  
and of the other library facilities is otherwise permitted,  
and provided that you do these two things:  
a) Accompany the combined library with a copy of the  
same work based on the Library, uncombined with  
any other library facilities. This must be distributed  
under the terms of the Sections above.  
b) Give prominent notice with the combined library of  
the fact that part of it is a work based on the Library,  
and explaining where to find the accompanying  
uncombined form of the same work.  
8. You may not copy, modify, sublicense, link with, or  
distribute the Library except as expressly provided  
under this License. Any attempt otherwise to copy,  
modify, sublicense, link with, or distribute the Library is  
void, and will automatically terminate your rights under  
this License. However, parties who have received  
copies, or rights, from you under this License will not  
have their licenses terminated so long as such parties  
remain in full compliance.  
9. You are not required to accept this License, since you  
have not signed it. However, nothing else grants you  
permission to modify or distribute the Library or its  
derivative works. These actions are prohibited by law if  
you do not accept this License. Therefore, by modifying  
or distributing the Library (or any work based on the  
Library), you indicate your acceptance of this License to  
do so, and all its terms and conditions for copying,  
distributing or modifying the Library or works based on  
it.  
10. Each time you redistribute the Library (or any work  
based on the Library), the recipient automatically  
receives a license from the original licensor to copy,  
distribute, link with or modify the Library subject to  
these terms and conditions. You may not impose any  
further restrictions on the recipients' exercise of the  
rights granted herein. You are not responsible for  
enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation  
of patent infringement or for any other reason (not  
limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that  
contradict the conditions of this License, they do not  
excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your  
obligations under this License and any other pertinent  
obligations, then as a consequence you may not  
distribute the Library at all. For example, if a patent  
license would not permit royalty-free redistribution of  
the Library by all those who receive copies directly or  
indirectly through you, then the only way you could  
satisfy both it and this License would be to refrain  
entirely from distribution of the Library.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF  
CHARGE, THERE IS NO WARRANTY FOR THE  
LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE  
LAW. EXCEPT WHEN OTHERWISE STATED IN  
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER  
PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESSED OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE  
RISK AS TO THE QUALITY AND PERFORMANCE OF  
THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY  
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL  
NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE  
LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO  
MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY  
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR  
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OR INABILITY TO USE THE  
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF  
DATA OR DATA BEING RENDERED INACCURATE OR  
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A  
FAILURE OF THE LIBRARY TO OPERATE WITH ANY  
OTHER SOFTWARE), EVEN IF SUCH HOLDER OR  
OTHER PARTY HAS BEEN ADVISED OF THE  
Otherwise, if the work is a derivative of the Library, you  
may distribute the object code for the work under the  
terms of Section 6. Any executables containing that  
work also fall under Section 6, whether or not they are  
linked directly with the Library itself.  
6. As an exception to the Sections above, you may also  
combine or link a "work that uses the Library" with the  
Library to produce a work containing portions of the  
Library, and distribute that work under terms of your  
choice, provided that the terms permit modification of  
the work for the customer's own use and reverse  
engineering for debugging such modifications.  
You must give prominent notice with each copy of the  
work that the Library is used in it and that the Library  
and its use are covered by this License. You must  
supply a copy of this License. If the work during  
execution displays copyright notices, you must include  
the copyright notice for the Library among them, as well  
as a reference directing the user to the copy of this  
License. Also, you must do one of these things:  
a) Accompany the work with the complete  
POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the  
greatest possible use to the public, we recommend making  
it free software that everyone can redistribute and change.  
You can do so by permitting redistribution under these  
terms (or, alternatively, under the terms of the ordinary  
General Public License).  
To apply these terms, attach the following notices to the  
library. It is safest to attach them to the start of each source  
file to most effectively convey the exclusion of warranty; and  
each file should have at least the "copyright" line and a  
pointer to where the full notice is found.  
<one line to give the library's name and a brief idea of  
what it does.>  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/  
or modify it under the terms of the GNU Lesser General  
Public  
corresponding machine-readable source code for the  
Library including whatever changes were used in the  
work (which must be distributed under Sections 1  
and 2 above); and, if the work is an executable linked  
with the Library, with the complete machine-readable  
"work that uses the Library", as object code and/or  
source code, so that the user can modify the Library  
and then relink to produce a modified executable  
containing the modified Library. (It is understood  
that the user who changes the contents of definitions  
files in the Library will not necessarily be able to  
recompile the application to use the modified  
definitions.)  
If any portion of this section is held invalid or  
unenforceable under any particular circumstance, the  
balance of the section is intended to apply, and the  
section as a whole is intended to apply in other  
circumstances.  
52  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License as published by the Free Software Foundation;  
either version 2.1 of the License, or (at your option) any  
later version.  
08  
This library is distributed in the hope that it will be  
useful, but WITHOUT ANY WARRANTY; without even  
the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. See the GNU Lesser  
General Public License for more details.  
You should have received a copy of the GNU Lesser  
General Public License along with this library; if not,  
write to the Free Software  
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,  
MA 02110-1301 USA  
Also add information on how to contact you by electronic  
and paper mail.  
You should also get your employer (if you work as a  
programmer) or your school, if any, to sign a "copyright  
disclaimer" for the library, if necessary. Here is a sample;  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in  
the library `Frob' (a library for tweaking knobs) written  
by James Random Hacker.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That's all there is to it!  
53  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condensation  
Cautions on use  
08  
If the player is moved suddenly from a cold place into a  
warm room (in winter, for example) or if the temperature  
in the room in which the player is installed rises suddenly  
due to a heater, etc., water droplets (condensation) may  
form inside (on operating parts and the lens). When  
condensation is present, the player will not operate  
properly and playback is not possible. Let the player stand  
at room temperature for 1 or 2 hours with the power  
turned on (the time depends on the extent of  
Moving the player  
If you need to move this unit, first remove the disc if  
there’s one loaded, and close the disc tray. Next, press  
STANDBY/ON to switch the power to standby,  
checking that the POWER OFF indication on the front  
panel display goes off. Wait at least 10 seconds. Lastly,  
disconnect the power cord.  
condensation). The water droplets will dissipate and  
playback will become possible.  
Never lift or move the unit during playback — discs rotate  
at a high speed and may be damaged.  
Condensation can also occur in the summer if the player  
is exposed to the direct wind from an air-conditioner. If  
this happens, move the player to a different place.  
Place of installation  
Select a stable place near the TV and AV system to which  
the unit is connected.  
Cleaning the player  
Normally, wipe the player with a soft cloth. For tough dirt,  
apply some neutral detergent diluted in 5 to 6 parts water  
to a soft cloth, wring out thoroughly, wipe off the dirt, then  
wipe again with a dry cloth.  
Do not place the player on top of a TV or color monitor.  
Keep it away from cassette decks or other components  
easily affected by magnetism.  
Avoid the following types of places:  
• Places exposed to direct sunlight  
• Humid or poorly ventilated places  
• Extremely hot or cold places  
• Places subject to vibration  
• Dusty places  
Note that getting alcohol, thinner, benzene or insecticide  
on the player could cause the print and coating to peel off.  
Also, avoid leaving rubber or vinyl products in contact  
with the player for long periods of time, as this could  
damage the cabinet.  
When using chemical-impregnated wipes, etc., read the  
wipe’s cautions carefully.  
• Places exposed to soot, steam or heat (in kitchens,  
etc.)  
Unplug the power cord from the power outlet when  
cleaning the player.  
Do not place objects on top  
Do not place objects on top of the player.  
Caution for when the unit is  
installed in a rack with a glass  
door  
Do not obstruct the ventilation  
holes  
Do not use the player on a shaggy rug, bed, or sofa, and  
do not cover the player with a cloth, etc. Doing so will  
prevent heat dissipation and could lead to damage.  
Do not press the OPEN/CLOSE on the remote control  
to open the disc tray while the glass door is closed. The  
door will hamper the movement of the disc tray, and the  
unit could be damaged.  
Keep away from heat  
Do not place the player on top of an amplifier or other  
device generating heat. When installing in a rack, to avoid  
the heat generated by the amplifier and other devices,  
place it on a shelf below the amplifier whenever possible.  
Cleaning the pickup lens  
The player’s lens should not become dirty in normal use,  
but if for some reason it should malfunction due to dust  
or dirt, consult your nearest Pioneer authorized service  
center. Although lens cleaners for players are  
commercially available, we advise against using them  
since some may damage the lens.  
Turn the power off when not  
using the player  
Depending on the conditions of the TV broadcast signals,  
striped patterns may appear on the screen when the TV is  
turned on while the player’s power is turned on. This is not  
a malfunction with the player or TV. If this happens, turn  
the player’s power off. In the same way, noise may be  
heard in the sound of a radio.  
Handling discs  
Do not use damaged (cracked or warped) discs.  
Do not scratch the disc’s signal surface or let it get dirty.  
Do not load more than one disc into the player at a time.  
54  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not glue paper or put stickers onto the disc, or use a  
pencil, ball-point pen or other sharp-tipped writing  
instrument. These could all damage the disc.  
Do not use benzene, thinner or other volatile chemicals.  
Also do not use record spray or antistatic agents.  
08  
For tough dirt, apply some water to a soft cloth, wring out  
thoroughly, wipe off the dirt, then wipe off the moisture  
with a dry cloth.  
Specially shaped discs  
Specially shaped discs (heart-shaped, hexagonal, etc.)  
cannot be used on this player. Never use such discs, as  
they will damage the player.  
Storing discs  
Always store discs in their cases, and place the cases  
vertically, avoiding places exposed to high temperatures  
or humidity, direct sunlight or extremely low  
temperatures.  
Be sure to read the cautions included with the disc.  
Cleaning discs  
Condensation on discs  
It may not be possible to play the disc if there are  
fingerprints or dust on it. In this case, using a cleaning  
cloth, etc., to wipe the disc gently from the center toward  
the outer edge. Do not use a dirty cleaning cloth.  
If the disc is moved suddenly from a cold place into a  
warm room (in winter, for example), water droplets  
(condensation) may form on the disc surface. Discs will  
not play properly if there is condensation on them.  
Carefully wipe off the water droplets from the disc surface  
before using the disc.  
Troubleshooting  
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this  
component, check the points below. Sometimes the trouble may lie in another component. Inspect the other  
components and electrical appliances being used. If the trouble cannot be rectified even after checking the points  
below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.  
Playback  
Problem  
Check  
Remedy  
• Disc does not play.  
Is the disc one that is  
playable on this player?  
Check whether the disc is one that can be played on this player  
(page 7).  
• Disc tray opens  
automatically.  
Is the file one that is playable • Check whether the file is one that can be played on this player  
on this player?  
(page 10).  
• Check whether or not the file is damaged.  
Is the disc scratched?  
Is the disc dirty?  
It may not be possible to play scratched discs.  
Clean the disc (above).  
Is there a piece of paper or  
sticker attached to the disc?  
The disc may be warped and unplayable.  
Is the disc properly set in the • Set the disc with the printed side facing up.  
disc tray?  
• Set the disc properly in the depression in the disc tray.  
Is the region number correct? See page 9 for the region numbers of discs that can be played on this  
player.  
55  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
08  
No picture is displayed or the Is the video cable properly  
picture is not displayed  
properly.  
• Connect the cable properly according to the connected devices  
(page 15).  
connected?  
• Disconnect the cable (video/audio cable or HDMI cable), then  
reinsert it firmly and all the way in.  
• For BDP-LX55, a TV or any other device which outputs video signals  
must be connected to the HDMI OUT (MAIN) terminal (page 18).  
Is the video cable damaged? If the cable is damaged, replace it with a new one.  
Is the input setting on the  
Read the operating instructions for the connected components and  
connected TV or AV receiver switch to the proper input.  
or amplifier right?  
Is the output video resolution • On the BDP-LX55, switch the resolution at Resolution (page 41).  
properly set?  
• On the BDP-440/BDP-140, press HDMI to switch the video resolution  
output from the HDMI OUT terminal (page 12).  
• Is the player connected  
with an HDMI cable other  
1080p or Deep Color video signals may not be output properly,  
depending on the HDMI cable being used or the player’s settings. If you  
wish to output the video signals with 1080p or Deep Color, connect the  
®
than a High Speed HDMI  
cable (with a Standard  
®
TV using a High Speed HDMI cable without a built-in equalizer, then  
reset the player using the Setup Navigator (page 23).  
®
HDMI cable)?  
• Are you using an HDMI  
cable with a built-in  
equalizer?  
Is a DVI device connected?  
The picture may not be displayed properly if a DVI device is connected.  
Is Color Space properly set? Change the Color Space setting (page 41).  
For the BDP-LX55:  
Is the HDMI Mode set  
appropriately?  
Set the HDMI Mode to something other than Pure Audio (page 41).  
Picture freezes and the front  
panel and remote control  
buttons stop working.  
• Press STOP to stop playback, then restart playback.  
• If the playback cannot be stopped, press STANDBY/ON on the  
player’s front panel to turn off the power, then turn the power back on.  
• If the power cannot be turned off, unplug the power cord, wait several  
seconds, then plug the power cord back into the outlet.  
No picture is displayed or  
picture is not output in high  
definition when playing BDs.  
With some discs, it may not be possible to output the video signals from  
the VIDEO output terminal. In this case, connect using an HDMI cable  
(page 15).  
• Picture is disturbed during  
playback.  
• This player supports Rovi analog copy protection technology. With  
some TVs (such as with built-in video deck), the picture will not be  
displayed properly when the copy protected DVD title is played. This is  
not a malfunction.  
• Picture is dark.  
• If the player and TV are connected via a DVD recorder/video deck,  
etc., the picture will not be displayed properly due to analog copy  
protection. Connect the player and TV directly.  
• Picture is stretched.  
• Picture is cropped.  
Is the TV’s aspect ratio  
properly set?  
Read the operating instructions for the TV and set the TV’s aspect ratio  
properly.  
• Aspect ratio cannot be  
switched.  
Is TV Screen properly set?  
Set TV Screen properly (page 39).  
When video signals with a resolution of 1080/50i, 1080/50p, 720/50p,  
1080/24p, 1080/60i, 1080/60p or 720/60p are being output from the  
HDMI OUT terminal, they may be output with an aspect ratio of 16:9  
even if TV Screen is set to 4:3 Pan&Scan (page 39).  
Picture is interrupted.  
The picture may be interrupted when the resolution of the recorded  
video signal switches. On the BDP-LX55, switch the resolution at  
Resolution (page 41). On the BDP-440/BDP-140, press HDMI to select  
a setting other than Auto (page 41).  
The subtitles cannot be  
switched.  
The subtitles cannot be switched for discs recorded on a DVD or BD  
recorder.  
56  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
08  
• No sound is output.  
• Sound is not output  
properly.  
Is the disc played back in  
slow motion?  
Is the disc played back in fast  
forward or fast reverse?  
No sound is output during slow motion play and forward and reverse  
scanning.  
Are the audio cables properly • Connect the cable properly according to the connected devices  
connected?  
(page 15).  
• Insert the cable firmly and all the way in.  
Is the audio cable damaged? If the cable is damaged, replace it with a new one.  
Is Audio Output properly  
set?  
Set Audio Output properly, according to the connected device  
(page 40).  
Are the connected  
Read the operating instructions for the connected components and  
components (AV receiver or check the volume, input, speaker settings, etc.  
amplifier, etc.) properly set?  
Are you trying to listen to the Audio signals are not output from the HDMI OUT terminal when video  
sound of the HDMI OUT  
signals are being output from the VIDEO output terminals. When  
terminal while watching the watching the picture of the VIDEO output terminals, connect an optical  
picture from the VIDEO  
output terminals?  
digital audio cable or regular audio cables to listen to the sound  
(page 20). Once connections are completed, use Setup Navigator to  
make the player’s settings (page 23).  
Is HDMI Audio Out properly Set HDMI Audio Out to Re-encode or PCM. (page 41).  
set?  
Is a DVI device connected?  
The sound will not be output from the HDMI OUT terminal if a DVI  
device is connected. Connect the device to a DIGITAL OUT terminal or  
the AUDIO OUT terminals (page 20).  
For some BDs, audio signals are only output from DIGITAL OUT  
terminal or the HDMI OUT terminal.  
For the BDP-LX55:  
Is the HDMI Mode set  
appropriately?  
Set the HDMI Mode properly, according to the connected device  
(page 41).  
Multi-channel sound is not  
output.  
Is the audio output of the  
connected AV receiver or  
amplifier, etc., properly set? amplifier.  
Read the operating instructions for the connected AV receiver or  
amplifier and check the audio output settings of the AV receiver or  
Is multi-channel sound  
selected?  
Use the menu screen or AUDIO to switch the disc’s sound to multi-  
channel.  
Noise can be heard when  
Is the connected AV receiver If an AV receiver or amplifier that is not compatible with DTS Digital  
outputting DTS Digital Audio or amplifier compatible with Surround is connected to the DIGITAL OUT terminal, set Digital  
signals from the DIGITAL  
DTS Digital Surround?  
Output to PCM (page 40).  
OUT terminal.  
192 kHz or 96 kHz digital  
audio signals cannot be  
output from the DIGITAL  
OUT terminal.  
It is not possible to output 192 kHz or 96 kHz digital audio signals from  
this player’s DIGITAL OUT terminal. The signals are automatically  
converted to 48 kHz or less for output.  
Secondary audio or  
interactive audio is not  
output.  
Is HDMI Audio Out properly When listening to the sound from an HDMI OUT terminal, set HDMI  
set? Audio Out to PCM (page 41).  
Are Digital Output properly When listening to the sound from an DIGITAL OUT terminal, set  
set?  
Digital Output to Re-encode or PCM (page 40).  
Sound is fast or slow.  
(Only for BDP-LX55 and BDP-  
440)  
When an HDMI cable is  
When a Pioneer AV receiver or amplifier compatible with the PQLS  
connected, are audio signals function is connected directly to the player’s HDMI OUT terminal using  
being output from devices  
connected with cables other CD (CD-DA). Because of this, the sound output from components other  
an HDMI cable, the PQLS function is activated when playing an audio  
than HDMI cables?  
than the ones connected by an HDMI cable may be fast or slow. If this  
happens, set Control to Off (page 41).  
After a disc is inserted,  
Loading stays displayed and recorded on the disc?  
playback does not start.  
Are there too many files  
When a disc on which files are recorded is inserted, depending on the  
number of files recorded on the disc, loading may take several dozen  
minutes.  
is displayed in file names,  
etc.  
The characters that cannot be displayed on this player are displayed in  
.  
A message indicating low  
memory appears while  
playing a BD-ROM disc.  
• Connect a USB memory device (page 21).  
• Erase the data stored on the connected USB memory device from  
BUDA Setup (page 45).  
57  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control function  
08  
Problem  
Check  
Remedy  
Control function does not  
work.  
Is the HDMI cable properly  
connected?  
To use the Control function, connect the Flat Screen TV and AV system  
(AV receiver or amplifier, etc.) to the HDMI OUT terminal (page 15).  
®
Is the HDMI cable you are  
Use a High Speed HDMI Cable. The Control function may not work  
®
®
using a High Speed HDMI  
Cable?  
properly if an HDMI cable other than a High Speed HDMI Cable is  
used.  
Is this player connected to  
If video signals are being output from a terminal other than the HDMI  
the TV using an HDMI cable OUT terminal, the Control function does not work. Connect to the TV  
to watch the picture?  
using an HDMI cable (page 15).  
For the BDP-LX55:  
Is the HDMI Mode set  
appropriately?  
When both of the HDMI OUT terminals (MAIN and SUB) are used, the  
Control function only works for the HDMI OUT (SUB) terminal  
(page 16).  
Is Control set to On on the Set Control to On on the player (page 41).  
player?  
Does the connected device • The Control function will not work with devices of other brands that  
support the Control function? do not support the Control function, even when connected using an  
HDMI cable.  
• The Control function will not work if devices that do not support the  
Control function are connected between the Control-compatible device  
and the player.  
• See page 16.  
• Even when connected to a Pioneer product compatible with the  
Control function, some of the functions may not work.  
Also refer to the operating instructions for the connected device.  
Is Control set to On on the  
connected device?  
Set Control to On on the connected device. The Control function  
operates when Control is set to On for all devices connected to the  
HDMI OUT terminal.  
Once connections and settings of all the devices are finished, be sure  
to check that the player’s picture is output to the Flat Screen TV. (Also,  
check after changing the connected devices and connecting and/or  
disconnecting HDMI cables.) If the player’s picture is not being output  
to the Flat Screen TV, the Control function may not work properly.  
For details, refer to the operating instructions of the connected device.  
Are multiple players  
connected?  
The Control function may not work if three or more players, including  
this player, are connected by an HDMI cable.  
Network  
Problem  
Check  
Remedy  
• BD-LIVE function  
(connection to the Internet)  
cannot be used.  
Perform Connection Test (page 45). If “Networks is OK.” is displayed,  
check the proxy server settings (page 44). Also, there may be a problem  
with the Internet connection. Contact your Internet service provider.  
• “No valid id file found!” is  
displayed when I try to update  
the software.  
Software updating is slow.  
Depending on the Internet connection and other conditions, some time  
may be required to update the software.  
58  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
08  
A message other than  
“Networks is OK.” is  
Is “Network is FAILED.”  
displayed?  
• Check that this player and the Ethernet hub (or router with a hub  
functionality) are properly connected.  
displayed when Connection  
Test is performed.  
• If the IP address is obtained using the DHCP server function, check  
the setting is correct at the Information (page 41). For details on the  
DHCP server function, see the operating instructions for the Ethernet  
hub (or router with a hub functionality).  
• Set the IP address manually.  
• Check the operation and settings of the DHCP server function of the  
Ethernet hub (or router with hub functionality). For details on the DHCP  
server function, see the operating instructions for the Ethernet hub (or  
router with a hub functionality).  
• If this player has been set manually, reset the IP address of this player  
or other components.  
Is the Ethernet hub (or router • Check the settings and operation the Ethernet hub (or router with a  
with a hub functionality)  
operating properly?  
hub functionality). For details, see the operating instructions for the  
Ethernet hub.  
• Reboot the Ethernet hub (or router with a hub functionality).  
Others  
Problem  
Check  
Remedy  
The player’s power turns off Is Auto Power Off set to 10 If Auto Power Off is set to 10 min/20 min/30 min, the player’s power  
automatically.  
min/20 min/30 min?  
turns off automatically if no operation is performed for over 30 minutes  
(page 43).  
The player’s power turns on Is Control set to On?  
automatically.  
The player’s power may turn on together with the power of the TV  
connected to the HDMI OUT terminal. If you do not want the player’s  
power to turn on when the TV’s power is turned on, set Control to Off  
(page 41).  
The player cannot be  
operated with the remote  
control.  
Are you operating the remote Operate from within 7 m of the remote control sensor.  
control from a point too far  
away from the player?  
Are the batteries dead?  
Replace the batteries (page 5).  
Input of the connected TV  
and AV system switches  
automatically.  
Is Control set to On?  
The input of the TV and AV system (AV receiver or amplifier, etc.)  
connected to the HDMI OUT terminal may automatically switch to the  
player when playback starts on the player or the menu screen (Home  
Media Gallery, etc.) is displayed. If you do not want the inputs of the  
connected TV and AV system (AV receiver or amplifier, etc.) to switch  
automatically, set Control to Off (page 41).  
Settings I have made have  
been cleared.  
• Have you disconnected the Always press STANDBY/ON on the player’s front panel or  
power cord while the player’s STANDBY/ON on the remote control and check that POWER OFF  
power was on?  
has turned off from the player’s front panel display before  
disconnecting the power cord. Be particularly careful when the power  
cord is connected to the AC outlet on another device because the  
player turns off in conjunction with the device.  
• Has there been a power  
failure?  
59  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Check  
Remedy  
08  
USB(external storage)device Is the USB device properly  
does not work with this player connected?  
properly.  
• Turn the player’s power off, then turn the power back on.  
• Turn the player’s power off, then reconnect the external storage  
device (page 21).  
Is the USB device connected Do not use an extension cable. The player may not work properly with it.  
via an extension cable?  
Is the external storage device External storage device may not work if connected to the USB port via  
connected to the USB port via a memory card reader or USB hub.  
a memory card reader or USB  
hub?  
Does the external storage  
device contain multiple  
partitions?  
External storage devices may not be recognized if they contain multiple  
partitions.  
Some external storage devices may not operate.  
Is the external storage device Turn the player’s power off, then disable the write-protection.  
write-protected?  
Is the external storage  
Only external storage devices with a FAT16 or FAT32 file system can be  
device’s file system FAT16 or used.  
FAT32?  
Turn the player’s power off, then turn the power back on.  
Default Gateway  
Glossary  
A default gateway is a communication device such as a router  
which passes data between networks. It is used to direct data to  
networks on which the destination gateway is not explicitly  
specified.  
Angle (Multi angle)  
Up to 9 camera angles can be recorded simultaneously on BD-  
ROM or DVD-Video discs, letting you view the same scene from  
different angles.  
DHCP (Dynamic Host Configuration  
Protocol)  
This protocol provides configuration parameters (IP address,  
etc.) for computers and other devices connected to the network.  
AVCHD (Advanced Video Codec High  
Definition)  
See page 9.  
DivX  
See page 10.  
AVCREC  
See page 9.  
DNS (Domain Name System)  
This is a system for associating Internet host names with IP  
addresses.  
BDAV  
Of the BD format, the Audio Visual Format Specifications for HD  
digital broadcast recording is referred to as BDAV on this player  
and in these operating instructions.  
Dolby Digital  
Dolby Digital is an audio format to record the sound in up to 5.1  
channels with a fraction of the amount of data as compared to  
linear PCM audio signals.  
BD-J  
See page 9.  
Dolby Digital Plus  
BD-LIVE  
Dolby Digital Plus is an audio format for high-definition media.  
Built on Dolby Digital, it combines the efficiency and flexibility to  
provide high quality multi-channel audio. With BD-ROMs, up to  
7.1 channels of digital sound can be recorded.  
See page 8.  
BDMV  
Of the BD format, the Audio Visual Format Specifications  
designed for pre-packaged high definition (HD) movie contents is  
referred to as BDMV on this player and in these operating  
instructions.  
Dolby TrueHD  
Dolby TrueHD is an audio format using lossless coding. With BD-  
ROMs, up to 8 channels can be recorded at 96 kHz/24 bits, or up  
to 6 channels at 192 kHz/24 bits.  
BONUSVIEW  
See page 8.  
DRM  
A technology for protecting copyrighted digital data. Digitized  
videos, images and audio retain the same quality even when they  
are copied or transferred repeatedly. DRM is a technology for  
restricting the distribution or playback of such digital data  
without the authorization of the copyright holder.  
Deep Color  
See page 15.  
60  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DTS Digital Surround  
DTS Digital Surround is an audio format to record 48 kHz/24 bits  
audio signals in 5.1 channels.  
Port number  
This is a sub-address provided below the IP address for  
simultaneously connecting to multiple parties during Internet  
communications.  
08  
DTS-HD High Resolution Audio  
Progressive scan  
DTS-HD High Resolution Audio is an audio format using lossy  
coding. It can record 7.1 channels at 96 kHz/24 bits.  
With this method, one picture is consisted of a single picture,  
without dividing it in two pictures. Progressive scan provides  
clear pictures with no flicker, in particular for still pictures that  
contain much text, graphics, or horizontal lines. Progressive scan  
is indicated in this player and operating instructions by a “p” after  
the resolution value (for example, 576p).  
DTS-HD Master Audio  
DTS-HD Master Audio is an audio format using lossless coding.  
With BD-ROMs, 7.1 channels can be recorded at 96 kHz/24 bits,  
or 5.1 channels at 192 kHz/24 bits.  
Proxy server  
This is a relay server for ensuring fast access and safe  
communications when connecting to the Internet from an  
internal network.  
Ethernet  
A standard for local area networks (LANs) used to connect  
multiple computers, etc. in the same location. This player  
supports 100BASE-TX.  
Region number  
Frames and fields  
See page 9.  
A frame is the unit for one of the still pictures which compose  
motion pictures. One frame consists of a picture of odd lines and  
a picture of even lines called fields in video signal with interlaced  
scan method (576i, 1080i, etc.).  
Secondary audio  
Some BD-ROMs include sub audio streams mixed with the main  
audio stream. These sub audio streams are called “secondary  
audio”. On some discs this secondary audio is recorded as the  
audio for the secondary video.  
HDMI (High-Definition Multimedia  
Interface)  
See page 15.  
Secondary video  
Some BD-ROMs include sub videos superimposed on the main  
videos using the Picture-in-Picture function. These sub videos are  
called “secondary video”.  
Interactive audio  
The audio signals recorded in the titles of BD-ROMs. They include  
for example the clicking sound made when the menu screen is  
operated.  
Subnet mask  
This is used to identify which part of the IP address corresponds  
to the subnet (a separately managed network). The subnet mask  
is expressed as ‘255.255.255.0’.  
Interlaced scan  
With this method, one picture is displayed by scanning it twice.  
The odd lines are displayed in the first pass, the even lines are  
displayed in the second, to form a single picture (frame).  
Interlaced scan is indicated in this player and operating  
instructions by an “i” after the resolution value (for example, 576i).  
USB (Universal Serial Bus)  
USB is the industry standard for connecting peripherals to PCs.  
VC-1  
IP address  
An address that identifies a computer or other device connected  
to the Internet or local area network. It is represented a number  
in four sections.  
A video codec developed by Microsoft and standardized by the  
Society of Motion Picture and Television Engineers (SMPTE).  
Some BDs include videos encoded in this codec.  
x.v.Color  
See page 15.  
Linear PCM  
This is referred as the audio signals that are not compressed.  
MAC (Media Access Control) address  
A hardware identification number assigned specifically to the  
network device (LAN card, etc.).  
MPEG (Moving Picture Experts Group)  
The name of a family of standards used to encode video and  
audio signals in a digital compressed format. The video encoding  
standards include MPEG-1 Video, MPEG-2 Video, MPEG-4 Visual,  
MPEG-4 AVC, etc. The audio encoding standards include MPEG-  
1 Audio, MPEG-2 Audio, MPEG-2 AAC, etc.  
Parental Lock  
See page 46.  
Picture-in-Picture (P-in-P)  
This is a function for superimposing a sub video on the main  
video. Some BD-ROMs include secondary video, which can be  
superimposed on the primary video.  
61  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
08  
Model  
BDP-LX55  
BDP-440  
BDP-140  
TM  
Type  
Blu-ray 3D PLAYER  
Rated voltage  
AC 100 V to 240 V  
AC 110 V to 240 V (Duty-free model in Japan only)  
50 Hz/60 Hz  
Rated frequency  
Power consumption  
BDP-LX55: 25 W  
BDP-440, BDP-140: 23 W  
Power consumption (standby)  
Weight  
BDP-LX55: 0.5 W  
BDP-440, BDP-140: 0.3 W  
BDP-LX55: 3.5 kg  
BDP-440: 2.6 kg  
BDP-140: 2.1 kg  
External dimensions (including projecting parts)  
BDP-LX55: 435 mm (W) x 93 mm (H) x 252 mm (D)  
BDP-440: 435 mm (W) x 90 mm (H) x 252 mm (D)  
BDP-140: 435 mm (W) x 58 mm (H) x 249 mm (D)  
+5 °C to +35 °C  
Tolerable operating temperature  
Tolerable operating humidity  
HDMI  
5 % to 85 % (no condensation)  
BDP-LX55: 2 set, 19-pin: 5 V, 250 mA  
BDP-440, BDP-140: 1 set, 19-pin: 5 V, 250 mA  
1 set, RCA jack: 1.0 Vp-p (75 Ω)  
1 set, RCA jacks  
Video outputs  
Audio outputs  
2-channel (left/right)  
Audio output level  
Frequency response  
200 mVrms (1 kHz, –20 dB)  
4 Hz to 88 kHz (192 kHz sampling)  
1 set, Optical digital jack  
Digital audio outputs Optical  
LAN  
USB  
1 set, Ethernet jack (10BASE-T/100BASE-TX)  
2 set, Type A  
Note  
• The specifications and design of this product are subject to change without notice.  
62  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
63  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Mr Coffee Coffeemaker SPR 030308 User Manual
Musical Fidelity Stereo Amplifier A32 User Manual
NEC Computer Monitor E201W User Manual
NEC Computer Monitor FE770 User Manual
NEC Crib Toy L51W User Manual
Nintendo Video Games 45496742157 User Manual
Oki Printer C7500 V2 User Manual
Onkyo Stereo Receiver TX SR307 User Manual
OPTI UPS Power Supply Standby UPS System User Manual
Palm PDAs Smartphones handheld User Manual