Digital Imaging Systems
DP-1810P
with Options
Operating Instructions
(For Copier)
DP-2010E
with Options
Model No.
DP-1510P/1810P/2010E
J
?
I
Before operating this equipment, please read these instructions completely and keep these operating
instructions for future reference.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Chart
Common Features and Usage
I Basic Operation
Original
1 2 3 4 5
Original Size
(Reduction/
Enlargement
Only)
Copy Size
(Reduction/ of Copies
Enlargement
Number
Press
START
Place the
Original
Load Paper
Turn the Power
Switch On
Only)
I Position of the Original
From ADF (or i-ADF)
From Platen
Original Guide
CPlace originals face down on the
platen or face up on the ADF.
CIf the original is not positioned
properly, a portion of the original
may not be copied.
CFor originals smaller than A5 size,
position the original within the area
of A5 and select A5.
A5
A4
A5
A4
FLS
B4
A3
A5
ADFTray
FLS1
A5
A4
FLS2
B4
Original Guides
Adjust to the original’s width
A3
I Commonly Used Functions and Operating Procedures
Full Size
(See page 12)
Makes a copy that is the same
size as the original
1 4 5
Reduction or Enlargement
Copies the original at a fixed
reduction or enlargement ratio
(See page 13)
1 2 3 4 5
I Memory Capacity
When the memory becomes full during original scanning, the message “OUT OF MEMORY”
“CONTINUE? 1:YES 2: NO” will be displayed in the message display. In this case, follow the
operating instruction in the message display.
When additional memory is required, consult with an authorised servicing dealer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Star
As an ENERGY STAR® Partner, Panasonic has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage standards. This
product will automatically “power down” after a specified period of non-use. The use of this
ENERGY STAR® compliant product will reduce energy consumption and ultimately benefit the
environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorised Panasonic dealer for more details.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting To KnowYour Machine
Operation Chart .............................................................................................................................. 3
I Common Features and Usage..............................................................3
Energy Star ..................................................................................................................................... 4
Before Starting
Precautions ..................................................................................................................................... 7
I For Your Safety .....................................................................................7
I Handling ...............................................................................................8
I Toner and Paper ...................................................................................8
I Ventilation .............................................................................................8
I Installation ............................................................................................9
Control Panel ................................................................................................................................ 10
Making Copies
Basic Copy .................................................................................................................................... 12
I Full Size Copying................................................................................12
I Reduction or Enlargement Copying ....................................................13
I Zoom Copying ....................................................................................14
I Using the Sheet Bypass .....................................................................15
Creative Features ......................................................................................................................... 16
I 2 in 1 Copy .........................................................................................16
I 2 Page Copy .......................................................................................17
I Book/Edge/Margin ..............................................................................18
I 2-Sided/1-Sided Copy.........................................................................19
I 1 \ 2/2 \ 1/2 \ 2 Copy....................................................................20
I Book \ 2 Copy ..................................................................................21
I Job Memory .......................................................................................22
I Sort Copy ...........................................................................................23
Other Features .............................................................................................................................. 24
I Energy Saver/Interrupt Mode..............................................................24
I Skyshot Mode.....................................................................................25
Combined FunctionTable ............................................................................................................ 27
Function ........................................................................................................................................ 28
I Checking the Copier’s Total Counter ...................................................28
I General Functions ..............................................................................29
I Copier Settings ...................................................................................30
I General Functions for Key Operator ...................................................31
I Copier Settings for Key Operator ........................................................32
I Function Setting..................................................................................33
I Function Setting for Key Operator.......................................................34
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Options
Accessories .................................................................................................................................. 39
I Components .......................................................................................39
I Automatic Document Feeder ..............................................................40
Problem Solving
Problem Solving ........................................................................................................................... 42
I Adding Paper (J) ...............................................................................42
I Adding the Toner and Replacing Waste Toner Container (?) .............43
I Removing a Misfed Paper...................................................................45
Troubleshooting ........................................................................................................................... 52
I Before Calling Service ........................................................................52
I User Error Codes (U Code) ................................................................54
Others
Specifications ............................................................................................................................... 55
Options and Supplies................................................................................................................... 57
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
For Your Safety
I Laser Safety
LASER SAFETY
This unit employs a laser. Only qualified service personnel should
attempt to service this device due to possible eye injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
I Caution Label
(Digital copier with ADF option)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Handling
I Do not look directly at the exposure lamp when
copying.
I Do not turn the power switch Off or open the front
panel during copying.
CDo not drop paper clips or other metal objects into
the copier.
Toner and Paper
I Store toner, drum and paper in cool areas with low
humidity.
CUse high quality 60 - 90 g/m2 (Sheet Bypass:
56 - 128 g/m2) paper.
CFor optimum performance, it is recommended that
only Panasonic Brand supplies are used in the
copier.
Ventilation
I The copier should be installed in a well-ventilated
area to minimise the ozone density in the air.
I The copier should not be installed in areas with the
following conditions:
CExtremely high or low temperature and humidity.
Ambient conditions
Temperature:
10 – 35°C
Relative humidity: 45 – 80%
CWhere temperature and humidity can change
rapidly, causing condensation.
CDirect exposure to sunlight.
CDirectly in the air conditioning flow.
CIn areas of high dust concentration.
CIn areas of poor ventilation.
CIn areas with chemical fume concentration.
CIn areas with extreme vibration.
CWith unstable or uneven conditions (floors, etc.).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Installation
I The maximum power consumption is 1.2 kW.
A properly wired (grounded), dedicated, 6A, 220-240 V AC outlet is required.
Do not use an extension cord.
The power cord on this equipment must be used to disconnect the main power.
Please ensure that the socket outlet is installed near the equipment and is easily accessible.
FORYOUR SAFETY
Caution Note: Disconnect from the mains supply before removing covers.
The mains plug on this equipment must be used to disconnect mains power. Please ensure that the
socket outlet is installed near the equipment and shall be easily accessible.
For U.K.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13
amps and that it is approved by ASTA or BSI to BS1362
Check for the ASTA mark 7 or the BSI mark 6 on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET INYOUR OFFICE
THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
WARNING:THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green andYellow: Earth
Blue
Brown
: Neutral
: Live
As the colours of the wires in the main lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which
is marked by letter E or by the safety Earth symbol “L” or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in
the plug which is marked with the letter L or coloured RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
(For DP-2010E only)
No
Contents
Refer to
2 in 1 Key
#
Page 16
CFrom two 1-sided originals, side by side, to 1-sided copies.
2 Page Copy Key
$
%
CCopying two facing pages on a A3 size original on two separate A4 size
Page 17
Page 23
sheets.
Sort Key
CWhen using Electric Sorting Mode. Optional memory is required.
&
(
)
MARGIN Key CShifts the image to the right or left.
Page 18
Page 18
Page 18
EDGE Key
BOOK Key
CCreates a blank edge.
CEliminates dark inner binding shadows.
Photo;Text/Photo;Text Keys
CSelect the type of original(s) for image density adjustment.
PHOTO
: Originals are mainly composed of photo.
*
Page 12
TEXT/PHOTO: Combined originals with text and photo.
TEXT : Originals are mainly composed of text.
+
-
Exposure Keys (DARKER, LIGHTER)
SET Key CSet the present selection.
Page 12
——
FUNCTION Key
CUse when changing the paper size, initial values for functions (default
values) and key operator settings.
.
Pages 28 – 37
/
0
1
CLEAR Key CClears the copy count in the display.
——
Page 24
——
ENERGY-SAVER Key
CCan save power while the copier is not in use.
RESET Key CResets all features to the initial power-on state.
CThe Control Panel displayed above shows only copier functions. Please refer to the
appropriate operating instructions for other control panel functions or in the Panasonic
Document Management System CD-ROM for the Printer control panel functions.
CThe illustration above shows the DP-2010E control panel.
NOTE
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
LCD Display
Warning Indications
J Add Paper
? Add Toner
I Misfeed
2 Call Service
For DP-1510P/1810P
No
Contents
CStops the copy run.
CUsed to start an operation.
Refer to
——
2
3
STOP Key
START Key
——
INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
CInterrupt Key interrupts other copy or print jobs while making copies.
4
Pages 22, 24
CMemory In Key registers two copy jobs for recall at a later time.
C
M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.
5
6
Cursor Keys CSelect copy ratio and function modes using (G or F).
——
——
PAPER TRAY Key
COPY SIZE Key
CUsed to select the paper tray manually.
7
——
C
Used to select Reduction/Enlargement only.For additional details, see page 13.
ORIGINAL SIZE Key
Used to select the original size manually. For additional details, see page 13.
8
9
:
——
——
——
C
PRINT Key CWhen selecting the Printer ON/OFF Line.
2-Sided/1-Sided Copy Key
C Used to select 1 \ 2, 2 \ 2 and 2 \ 1, Book \ 2 copying
CThe Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for other control panel functions or in
the Panasonic Document Management System CD-ROM for the Printer
control panel functions.
NOTE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Copy
Full Size Copying
I Copying the Same Size Originals (1:1)
Copy size is automatically selected.
ORIGINAL SIZE Key CLEAR Key
1
2 3
Number of Copies*
Place the Original
Press START**
Up to 999
LCD Display (Sample)
READY TO COPY
COPIES:001
Select the Original Size on units
without the ADF/i-ADF Option.
I Manually Selecting Exposure Control or Original Type
# Select the Original Type
PHOTO
:Originals are mainly composed of photo.
TEXT/PHOTO:Combined originals with text and photo.
TEXT :Originals are mainly composed of text.
$ Select Exposure Control
Press the DARKER/LIGHTER keys to adjust the exposure.
Use Clear key when cancelling the copy count.
∗
NOTE
While the copier is warming up, you may position your original on the copier, enter
your copy job selections and press the Start key. The COPY JOB RESERVED
indicator displays until the warm up cycle is completed and the copy job is
automatically started.
∗∗
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Copy
Reduction or Enlargement Copying
I Copying with Preset Ratios
RESET
1 2 3 4 5
Place the
Original
Select the
ORIGINAL SIZE
Number of
Copies
Press
START
Select the COPY
SIZE
Example: Reduction
Original size
Copy size
A3
A4
A3 ->A4
B
[A4B
]
ZOOM: 71% COPIES:001
The correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Copy Size
Original
Size
A3
B4
A4
71
A5
50
A3
B4
A4
A5
100
115
141
200
87
100
122
173
82
58
100
141
71
100
CWhen changing the paper tray, press the
PaperTray key.
CIf the desired copy size is different from the paper size loaded in the paper
tray, use the sheet bypass. (See page 15)
NOTE
CPress the RESET key to cancel all job settings.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Copy
Zoom Copying
I Zoom
RESET
Copies with variable zoom ratios from 50 % to 200 % in 1 % increments.
1 2 3 4 5
Number
of Copies
Place the
Original
Select ORIGINAL
SIZE
(without using
Press
START
Press Cursor (G or F)
keys to select Zoom Ratio
ADF/i-ADF)
B
A4 ->A4
B
[A4B
]
ZOOM:125% COPIES:001
(Example: 125 % Zoom)
CWhen changing the paper size after setting the zoom ratio, please use the paper tray
ATTENTION
NOTE
key.
CPress the RESET key to cancel all job settings.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Copy
Using the Sheet Bypass
I Copying on Special Paper, etc.
Place the original.
Open the sheet bypass.
1
Sheet
Bypass
Pull out the sheet bypass tray
until it stops.
(For A3 size only)
2
3
# Place the sheets of paper into
the tray. (approximately up to
50 A4 size sheets 80 /gm2)
Do not fill above.
Insert the paper until it stops.
Side Guides
$ Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
Press START.
CDo not feed curled paper through the sheet bypass to avoid misfeed.
ATTENTION
NOTE
CAdjust the side guides properly to avoid skewing, wrinkling or misfeeding.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
2 in 1 Copy
I 2 in 1 Copy
From two 1-Sided originals, side by side, to 1-Sided pages.
1 \ 2 (Layout)*
1 \ 2 (Layout)*
2 \ 1 (Layout)*
2 \ 1 (Layout)*
Landscape (Orientation)*
Portrait (Orientation)*
I Procedure
ADF/i-ADF
Face-Up
( )
COPY SIZE Number of Press
1 2 3 4 5
Place the
Originals
Press 2
in 1 key
(Reduction/
Enlargement
Only)
Copies
START
CThe ADF/i-ADF is required for 2 in 1 copy.
CPress the RESET key to cancel all job settings.
NOTE
CNumbers in parenthesis “ ( ) ” represent that, an additional step is required to
activate the feature.
The Orientation and Layout can be set in the Copier Settings function mode.
(See page 30)
∗
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
2 PAGE COPY
I 2 PAGE Copy
Copying two facing pages on a A3 size original on two separate A4 size sheets.
I Procedure
1 2 3 4 5
ORIGINAL SIZE
(A4 or A3 size Only)
Number of Press
Place the Press the 2
Originals PAGE COPY
key
Copies
START
Platen
A3 size original
Book Mark
Centre book
by length
and width
according
to centre
marks.
A4
CTo reset all job settings, press the RESET key.
NOTE
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
BOOK/EDGE/MARGIN
I BOOK Key
Eliminates dark inner binding shadows when copying from a book.
I EDGE Key
Creates a blank edge.
I MARGIN Key
Shifts the image to the right or left.
I Procedure
3
Press Cursor (G or F) keys to adjust
the void width while the button is
blinking. (approx. 5 sec.)
CVoid/Margin width: 5-99 mm
1 2
4 5
Place the
Original
Number
of Copies START
Press
Press BOOK, EDGE
or MARGIN key
Book
Initial Book Margin setting (Factory setting): 20 mm
∗
∗
∗
BOOK MARGIN
CENTER VOID = 20mm∨∧
Edge
Initial Equal Rate setting (Factory setting): 5 mm
Initial Left Margin setting (Factory setting): 10 mm
EQUAL RATE
VOID MARGIN = 5mm
∧
Margin**
LEFT MARGIN
10mm∨∧
Initial setting (Factory setting) can be changed in the Copier Settings function mode.
(See page 30)
∗
NOTE
If a part of the copied image is missing when using the Margin mode, change the
Frame Reduction setting to ON.
(See page 30)
∗∗
CPress the RESET key to cancel all job settings.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
2-Sided/1-Sided Copy (For DP-2010E)
I Key Operation
Press 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function.
2-Sided/1-Sided Copy key
From 1-Sided originals to 2-Sided
copies.
(See page 20)
(See page 20)
(See page 21)
(See page 20)
1 \ 2
2 \ 2
From 2-Sided originals to 2-Sided
copies.
From book originals to 2-Sided copies.
Book \ 2
2 \ 1
From 2-Sided originals to 1-Sided
copies.
C2-Sided originals may be handled either manually or automatically using the
i-ADF (DA-AR201).
NOTE
C2-Sided/1-Sided Copy function is only available for DP-2010E.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
1 \ 2 / 2 \1 / 2 \ 2 Copy (For DP-2010E)
I 1 \ 2 Copy
I 2 \ 1 Copy
I 2 \ 2 Copy
From 1-Sided originals to
From 2-Sided originals to
From 2-Sided originals to
2-Sided copies.
1-Sided copies.
2-Sided copies.
(From Copier Platen & i-ADF/
ADF)
(Using i-ADF)
(Using i-ADF)
Long Edge (Binding)*
Long Edge (Binding)*
Long Edge (Binding)
Short Edge (Binding)
Short Edge (Binding)*
Short Edge (Binding)*
I Procedure
i-ADF
Face-Up
( )
1 2 3 4 5
Place the
Originals
COPY SIZE
(Reduction/
Number of Press
Copies START
Press 2-Sided/
1-Sided Copy key
(circulation) to
select 1 \ 2, 2 \ 2
or 2 \ 1
Enlargement Only)
Press the I or H key to select
the binding location.
BINDING:LONG EDGE
PRESS < > TO SELECT
(When selecting 1 \ 2 Copy or 2 \ 1 Copy)
CTo reset each selection, press the RESET key.
NOTE
The initial setting of binding location for 1 \ 2 Copy and 2 \ 1 Copy (Long edge or
∗
Short edge) can be set in function mode. (See page 30)
C1 \ 2, 2 \ 2, 2 \ 1 Copy function is only available for DP-2010E.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
Book \ 2 Copy (For DP-2010E)
I Book \ 2 Copy
From book originals to 2-Sided copies.
A3 size originals only.
Facing (Book Format)*
Flipping (Book Format)*
( )
1 2 3 4 5
COPY SIZE
Press 2-Sided/
1-Sided Copy key
(circulation) to select
Book \ 2
Number of
Copies
Press
START
Place the
Original on
the Platen
(Reduction/
Enlargement Only*)
Platen
A3 size original
Book Mark
A3
Centre book by
length and width
according to
centre marks.
A4
CTo reset each selection, press the RESET key.
CA3 and FLS/B4 copy sizes cannot be selected.
NOTE
The book format and page order can be set in function mode. (See page 30)
CBook \ 2 Copy function is only available for DP-2010E.
∗
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
Job Memory
I Two Copy Jobs Can Be Programmed in Memory (M1, M2) for recall at a
later time.
To Store a Job in Memory
#Set up the copy job to be stored in memory,
by first selecting each function you wish the
copier to perform.
$Press the MEMORY IN (F2) key.
JOB MEMORY
PRESS M1,M2 TO STORE.
%Press the M1 (F3) or M2 (F4) key.
To Recall a Job Stored in Memory
&Place the Original
(Press the M1 (F3) or M2 (F4) key.
RECALL JOB MEMORY
LOADING...
The stored contents will be displayed.
)Press START
CStored job(s) will not be deleted even if the power switch is turned Off.
CWhen storing a new job into programmed memory, the previously stored job will be
NOTE
overwritten.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Creative Features
Sort Copy
I Sort Copy
The sort copy has 2 available electronic sorting functions as follows:
Note: Before using the sort copy, select the desired sorting mode by setting its function first
(See page 29).
Sort
Sort-Rotate
Multiple copies
sorted
automatically.
Multiple copies sorted
automatically and
Stacked in alternate
direction.
1
1
1
1
1
(Up to A4 size)
Platen Glass
ADF/i-ADF
( )
1 2 3 4 5
COPY SIZE
(Reduction/
Enlargement
Only)
ADF/i-ADF: Place the
Originals
Platen: Place the
First Original
Select the
SORT Mode
Number of Press
Copies START
From Platen Glass only:
ANOTHER ORIGINAL?
1:YES 2:NO
Place next Original
Press START
7 8
6
Press “1” key.
Repeat steps 6 and 7
until all originals are
ANOTHER ORIGINAL?
1:YES 2:NO
9 10
scanned and stored
into the copier’s memory.
Press “2” key.
CWhen the memory becomes full during original scanning, the message
“OUT OF MEMORY” “CONTINUE? 1:YES 2: NO” will be displayed in the
message display. If this occurs, follow the instructions in the message
display.
NOTE
For additional memory consult your authorised servicing dealer.
CTo reset all job settings, press the RESET key.
CElectronic sorting function is available for DP-1810P/2010E.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
Energy Saver/Interrupt Mode
INTERRUPT (F1) Key ENERGY-SAVER Key
I These modes can save power while the copier is not
ENERGY SAVER
in use.
Energy Saver Mode
#To enter this mode
Press the ENERGY-SAVER key or the copier will
automatically enter the ENERGY-SAVER Mode after
15 minutes* from the last copy.The indicator will flash.
$To cancel this mode and make copies
Press the ENERGY-SAVER key again.
Sleep Mode
#Automatically enters the Sleep Mode after 30
minutes from the last copy. The copier power will
drop and the indicator will light.
$To make copies, press the ENERGY-SAVER key.
Interrupt Mode
CThis mode can interrupt other copy jobs while
making copies.
INTERRUPT
#Press the INTERRUPT (F1) key, the indicator will
light.
$Make another copy job using the platen glass.
%Press the INTERRUPT (F1) key again to continue
the original job.
Note: The ADF/i-ADF can not be used with interrupt.
(Use only the Platen)
Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by the
key operator. (See page 31)
∗
NOTE
Modes
Power Consumption
Approximately 90 Wh
Approximately 38 Wh
Approximately 2.2 Wh
Warm UpTime
N/A
Normal Operation
Energy Saver Mode
Sleep Mode
17 sec. recovery
30 sec. recovery
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
Skyshot Mode
I Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF/i-ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.).These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode :The scanning area (size) is not pre-determined.
Manual Skyshot Mode:The scanning area (size) is pre-registered into memory (M1 and M2) in
advance. (See page 30)
I Digital Skyshot Mode
1
3
2
Place the Original on
the platen (Opening
the Platen Cover/
ADF/i-ADF)
Press
START Key
Number of
Copies
Note:The default setting of Digital Skyshot Mode is “NORMAL”. In this setting, the unit scans once.
If there are black areas around the borders in the copies, set the Digital Skyshot Mode to
“QUALITY” to soften the dark borders. In this setting, the unit scans twice.
#Press the FUNCTION key.
$Press the 2 key to select COPIER SETTINGS.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
%Press the SET key.
2:COPIER SETTINGS
PRESS SET TO SELECT
&Press 6 and SET key to select DIGITAL
COPIER PARAM.(00-14)
SKYSHOT.
ENTER NO._ OR ∨ ∧
(
Press 1-3 key to select the Digital Skyshot Mode.
1: OFF NONE
06 DIGITAL SKYSHOT
2:NORMAL
2: NORMAL Default setting (usually select this
mode).
3: QUALITY For better definition, select the
Quality mode.
)Press the SET key.
*Press the RESET key.
CAn incorrect exposure may occur when there is a black line at the edge of
the original or an image which the copier interprets as a black pattern in the
Skyshot mode.
NOTE
CAn incorrect position detection of the original may occur when a strong light
shines onto the glass during Skyshot mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
Skyshot Mode
I Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in
advance. (See page 32)
Platen
Upper-
left
corner
1 2 3 4
Place the
Original
Select the Custom
Size (M1 or M2)
Number of Press
Copies
START
#Press the FUNCTION key.
$Press the 2 key to select COPIER SETTINGS.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
2
%Press the SET key.
2:COPIER SETTINGS
PRESS SET TO SELECT
&Press 7 and SET key to select MANUAL SKYSHOT.
COPIER PARAM.(00-14)
ENTER NO._ OR ∨ ∧
(
Press 2 or 3 key to select the Custom Size.
07 MANUAL SKYSHOT
1:OFF
1: OFF
NONE
2: M1 ON
3: M2 ON
M1 size is ON*
M2 size is ON*
4: M1, M2 ON Both sizes are ON
)Press the SET key.
*Press the RESET key.
The default size for M1 is: 70(X) × 160(Y) mm, and M2 is: 95(X) × 220(Y) mm
∗
NOTE
CWhen changing the M1 or M2 size, consult with the key operator.
CWhen using the Manual Skyshot mode, M1 and M2 are turned ON and other
job memory cannot be used.
CPress the RESET key to cancel all job settings.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Combined Function Table
2-ORIGINAL
H COPY
Other
Functions
Margin
SORT
Remarks
Next
Selections
First
Selections
Zoom Copy
A
O O O O O O O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
O
O
O
O
O
O
O
O
2 in 1 Copy
2 Page Copy
1 \ 2
O
O
O
O
O
O
O
A A O A A A
A A A A A A
O A A A A A
O A A A A A
O A A A A A
O A A A A A
O
O
O
O
O
O
O
O
O
O
O
O
O
2 \ 2
Book \ 2
2 \ 1
Book
O O O O O O A
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
O O O O O O O
Edge
O
O
O
O
O
A
O
A
O
O
A
O
O
A
O
O
A
A
A
A
A
A
A
A
A
A
A
O
O
O
O
O
Margin
Non-Sort
Sort
O
O
O
O
O
O
O
A
A
A
Sort-Rotate
A
A
A
Manual Skyshot
Interrupt
O
O
✕ ✕ A A A A
O
O
O
O
O
O
–
–
–
–
–
–
A
A
✕
✕
✕ O ✕ ✕ ✕ ✕
✕
✕
O: Possible Combined Functions.
✕ : Unavailable Combined Functions.
A : Next Selection is Carried Out.
– : Indicates that SORT mode cannot be used. Non-sort operation is carried out.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
I Using Function Modes to Change the Initial Copy Modes
Options
General
Functions
Copier
Settings
Printer
Settings
LAN Settings
Input Identification Code
General
Functions for
Key Operator
Copier
Settings for
Key Operator
LAN Settings
for Key
Operator
Printer
Settings for
Key Operator
FUNCTION Key
I Procedure
RESET Key
COPY SIZE PAPER
Key TRAY Key
#Press the FUNCTION Key
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
$Press 1 (GENERAL FUNCTIONS) or 2
(COPIER SETTINGS) key.You may also use
the (G or F) keys.
%Press the SET key.
&Press the Keypad to select function modes
or use the (G or F) keys.
(Follow the on screen instructions.
)After setting, press the SET key to set up the
function.
I Checking the Copier’sTotal Counter
To display the copier’s Total Counter, press the COPY SIZE and PAPERTRAY keys
simultaneously.
CPlease refer to each option’s operating instructions for function settings.
NOTE
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
General Functions
Initial
Setting
No.
Modes
Function
Selects the sort mode.
00
SORT MODE DEFAULT
NON-SORT
OFF
CNON-SORT, SORT (For DP-1810P/2010E)
05
06
SORT MEMORY USAGE
DEPT. COUNTER
Displays the amount of sort memory used on
the panel.
COFF, DISPLAY
(For DP-1810P/2010E)
Copy usage and copy limit of the selected
department and total copy usage will appear
on the screen.
Consult
your
service
technician.
08
09
SORT-ROTATE DEFAULT
KEY OPERATOR MODE
Select Sort-Rotate mode.
OFF
COFF, ON
(For DP-1810P/2010E)
Input the key operator ID code.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Copier Settings
Initial
Setting
No.
Modes
Function
00
MARGIN DEFAULT
Selects the margin position and shift value.
CPOSITION (Left, Right, Top, Bottom)
CVALUE (5 - 99 mm)
POSITION
10 mm
01
EDGE DEFAULT
Selects the edge mode (Equal Rate = set the EQUAL RATE
same value for X & Y or Individual = set the
value for X & Y individually) and width.
CEQUAL RATE (X &Y ), INDIVIDUAL
C5 - 99 mm
5 mm
02
03
04
05
06
07
BOOK MARGIN DEF.
FRAME MARGIN
Selects the book Centre Void margin width.
C5- 99 mm
20 mm
INVALID
OFF
Select the reduction ratio in margin mode.
CINVALID, VALID
2-SIDED MODE DEF.
2 in 1 WITH FRAME
DIGITAL SKYSHOT
MANUAL SKYSHOT
Function sets the duplex priority mode.
COFF, 1 \ 2, 2 \ 2, Book \ 2 (For DP-2010E)
Selects whether or not to disable edge deletion. INVALID
CINVALID, VALID
Enables or disables the use of skyshot mode.
COFF, NORMAL, QUALITY
NORMAL
OFF
Enables or disables the use of Manual
Skyshot.
COFF; M1 ON; M2 ON; M1, M2 ON
08
AUTO EXPOSURE
Automatically adjusts the copy density for text
and photographic originals.
VALID
CINVALID, VALID
09
10
11
1 \ 2 BINDING DEF.
2 \ 1 BINDING DEF.
BOOK \ 2 DEFAULT
Selects the binding location for 1 \ 2 Copy.
LONG EDGE
LONG EDGE
C
LONG EDGE, SHORT EDGE (For DP-2010E)
Selects the binding location for 2 \ 1 Copy.
LONG EDGE, SHORT EDGE (For DP-2010E)
C
Selects the page order and book format for
Book \ 2 Copy.
FLIPPING
L \ R
1. BOOK FORMAT (1: FACING, 2: FLIPPING)
2. PAGE ORDER (1: L \ R, 2: R \ L) (For DP-2010E)
12
2 in 1 DEFAULT
Selects the orientation and layout for 2 in 1 Copy. ORIENTATION
CORIENTATION (Portrait, LANDSCAPE)
L \ R
CLAYOUT (L \ R, R \ L)
13
14
2 PAGE MODE DEF.
Selects the 2 page mode.
CL \ R, R \ L
L \ R
KEY OPERATOR MODE
Input key operator ID code.
CCertain Functions or Parameters are available for selection only when their
NOTE
respective option is installed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
General Functions for Key Operator
Initial
Setting
Consult your
service technician.
No.
Modes
PAPER SIZE
Function
Sets the paper size of each paper tray.
CTray-1, Tray-2, Tray-3, Tray-4
00
Selects the Control Panel reset time.
COFF, 30 sec, 1 min., 2 min., 3 min., 4 min.
1 min.
01
02
AUTO RESET TIME
Sets the Energy Saver mode and time.
CINVALID, ENERGY-SAVER, SLEEP
Energy save mode timer : 1-120 minutes
SLEEP
ENERGY SAVER MODE
Sleep mode timer
: 1-120 minutes
Selects the message language of the display.
CA-ENGLISH, C-FRENCH, SPANISH
04
05
06
09
10
LANGUAGE DEFAULT
SPECIAL TRAY 1
A-ENGLISH
Sets the paper tray for special paper (ex: coloured). NONE
CNONE, TRAY 1, TRAY 2, BYPASS
SPECIAL TRAY 2
Sets the paper tray for special paper.
CNONE, TRAY 1, TRAY 2, BYPASS
NONE
SOFT
Sets the panel touch sound.
COFF, SOFT, LOUD
KEY/TOUCH BEEP
BYPASS SET BEEP
Sets the sound when put paper(s) on bypass
INVALID
tray.
C1: INVALID 2: VALID
11
14
ORIG. SET BEEP ADF
DEPT. COUNTER MODE
Sets the sound when put paper(s) on ADF.
C1: INVALID 2: VALID
VALID
Monitors copy usage of each department.
(1) TOTAL COUNTER
Consult
your
service
technician.
(2) DEPT. COUNTER
(3) DEPT. COUNTER LIST
15
16
22
TOTAL COUNT
Total print out volume from the main unit.
PC PRINT COUNT
TCP/IP ADDRESS
Total print out volume from the PC.
Contact
your
Network
Adminstrator.
Sets the IP Address assigned to your machine.
∗
C3 digit × 4 (Use the MEMORY IN key to
enter the “.” between each set of 3-digit
numbers)
Contact
your
Network
Adminstrator.
23
24
25
TCP/IP SUBNET MSK
TCP/IP G/W ADDR.
COPY SETTING LIST
Sets the Subnet Mask.
∗
C3 digit × 4 (Use the MEMORY IN key to
enter the “.” between each set of 3-digit
numbers)
Contact
your
Network
Adminstrator.
Sets the Subnet Mask.
∗
C3 digit × 4 (Use the MEMORY IN key to
enter the “.” between each set of 3-digit
numbers)
Prints list containing Current Setting and
Standard Setting.
CIt is necessary to input the Key Operator ID code before changing items on
this page.
NOTE
CThe Special Tray 1 and 2 are not auto-selectable in the switching mode.
Not available for plain copier, but will be available when installing options
with advanced functions. (See page 57)
∗
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Copier Settings for Key Operator
Initial
Setting
No.
Modes
Function
Selects original setting
01
ORIGINAL (HOME)
T/P
CTEXT, T/P (Text/Photo), PHOTO
(Text/Photo)
02
03
04
10
12
TEXT CONTRAST
T/P CONTRAST
PHOTO CONTRAST
MAX. COPY SETTING
M1, SIZE
Selects contrast for Text mode
C1 ~ 5
3
Selects contrast for Text/Photo mode
C1 ~ 5
3
Selects contrast for Photo mode
C1 ~ 5
3
Determines whether to limit number of copies
C1 ~ 999
999
70 × 160 mm
Input a size in memory 1 for frequent usage
size.
(X) (Y)
CX: 5~432/Y: 5~297 mm
(See page 22)
95 × 220 mm
Input a size in memory 2 for frequent usage
size.
CX: 5~432/Y: 5~297 mm
(See page 22)
13
16
M2, SIZE
(X) (Y)
MEM. FULL ACTION
Selects the memory full action
Print
CPRINT, CANCEL
CIt is necessary to input the Key Operator ID code before changing items on
NOTE
this page.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function Setting
I Changing the Auto Exposure Setting
You can select whether the copying density is adjusted automatically for text and photographic
originals.
Press the FUNCTION key.
FUNCTION Key
1
Proceed as Follows:
2
#Press the 2 key to select COPIER SETTINGS.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
$Press the SET key.
2:COPIER SETTINGS
PRESS SET TO SELECT
%Press 8 and SET key to select AUTO
COPIER PARAM.(00-14)
ENTER NO._ OR ∨ ∧
EXPOSURE MODE.
&Press 1 or 2 key to select whether Auto
Exposure is to be carried out or not.
08 AUTO EXPOSURE
2:VALID
(Press the SET key to set up the AUTO
EXPOSURE MODE.
)Press the RESET key to exit the Function mode.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function Setting for Key Operator
I Changing the Paper Size
The Paper Trays are designed to accommodate A5, A4, A4 R, FLS/B4 and A3 size paper. To
change the paper size, perform the steps shown below.
Press the FUNCTION key.
FUNCTION Key
1
Proceed as Follows:
2
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
#Press the 1 key to select GENERAL
(Press 00 and 1 or 2 key to select
FUNCTIONS.
the PAPER SIZE.
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
00 PAPER SIZE
1:TRAY-1[A3i
]
$Press the SET key.
)Press SET to select the paper tray and
press (G or F) keys to set the paper
size.
GENERAL PARAM. (0-9)
ENTER NO._ OR ∨ ∧
Paper size changes are as follows.
A3
B4
A4
%Press 9 key.
09 KEY OPERATOR MODE
A4R FLS1 FLS2
B5 B5R
A5
ENTER PASSWORD=-I I
*Press the SET key to set up the PAPER
&Input the Key Operator ID code (3 digit)
SIZE.
and the SET key.
+Press the RESET key to exit the Function
KEY OPR.MODE (00-25)
mode.
ENTER NO._ OR ∨ ∧
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function Setting for Key Operator
Changing the Paper Guide and Paper Size Indicator in the Paper Tray
3
#Pull the Paper Tray out and remove
paper.
$Adjust the paper guide a to the
required paper length.
%Adjust the Paper Guide b to the
required paper width.
Pinch the stopper to move the Paper
Guide b.
Paper
Guide a
Stopper
Paper
Guide b
&Change the Paper Size Indicator.
Size
Indicator
(Close the Paper Tray.
CIt is recommended that the paper guide b be fixed in place with screws.
NOTE
Consult an authorised servicing dealer for details on how to fasten with
screws.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function Setting for Key Operator
I Department Counter
The Key Operator can manage, limit copies, counters and code numbers for each department.
(Maximum department counters: 50)
Press the FUNCTION key.
FUNCTION Key
1
Proceed as Follows:
2
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
#Press the 1 key to select GENERAL
&Press the Key Operator ID code (3 digit)
FUNCTIONS.
and SET key.
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
KEY OPR.MODE (00-25)
ENTER NO._ OR ∨ ∧
$Press the SET key.
(Press 14 and the SET key to select
DEPT. COUNTER MODE.
GENERAL PARAM. (0-9)
ENTER NO._ OR ∨ ∧
%Press 9 key.
09 KEY OPERATOR MODE
ENTER PASSWORD=-I I
CTo reset the function mode, press the RESET key.
NOTE
C
Contact your authorised servicing dealer to enable the Department Counter
feature.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Function Setting for Key Operator
Select the Department Counter Mode.
3
DEPT.COUNTER MODE
1:TOTAL COUNTER
Press 2 and the SET key.
DEPT. CODE (01-50)
ENTER NO. OR ∨ ∧
Change the Department ID Code, limit the maximum number of copies
and Department Counter number.
4
#Press the Keypad and the SET key to input the
ID CODE
01:1234
Department ID Code.
01: 1234
Department ID Code
Department No.
$Press the Keypad and the SET key to input the
MAX COPIES
01:123456
maximum number of copies.
01: 123456
Maximun number of copies (6 digits)
Department No.
%Press the Keypad and the SET key (G or F keys) to
DEPT.COUNTER
01:123456
select the Department No.
01: 123456
Counter (6 digits)
Department No.
&Press 0 and the SET key (Input “0”) to clear the counter.
CTo reset the function mode, press the RESET key.
NOTE
37
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Components
i-ADF (Inverting Automatic Document Feeder)
(DA-AR201)
ADF (Automatic Document Feeder)
(DA-AS180)
CFeeds original automatically
CDuplexing
CFeeds originals automatically.
C2 in 1 Copy
C2:1 Copy
C2 in 1 Copy
Image Memory
(DA-SM08B/SM16B/SM64B/SM28B)
C8/16/64/128 MB
DP-1810P
CTo increase the memory capacity for
electronic sorting and sort printing.
(For DP-1810P/2010E)
with Options
DP-1510P/1810P
CTo increase the memory capacity for sort
printing. (For DP-1510P)
DP-2010E
with Options
2nd/4th Paper Feed Module
(DA-DS182)
DP-2010E
CTo increase the paper feed sources
and capacity.
Paper Feed Module × 1 (550 sheets)
3rd Paper Feed Module
(DA-DS183)
CTo increase the paper feed sources
and capacity.
PCL6 Emulation Kit
(DA-PC210)
CPrinter Controller for PCL6*
Paper Feed Module × 1 (550 sheets)
10/100 Ethernet Interface/
Internet Fax Kit
(DA-NE200)
CNetwork Interface Board
PCL6 is a Page Description Language of the Hewlett-Packard Company.
∗
C
NOTE
CThe table below shows the options which are required for various functions.
Contact your authorized servicing dealer for details on combinations of options.
Other
2-ORIGINAL H
Function
Margin
SORT
COPY
Functions
Options
ADF
i-ADF
:Required
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Automatic Document Feeder
I ADF (DA-AS180) / i-ADF (DA-AR201)
1. Features
#Automatic Original Feeding
CThe ADF/i-ADF tray can hold up to 50 A4 size originals of 80 g/m2 paper (up to 30 FLS/B4 or
A3 size originals). It can accommodate from A5 to A3 size originals.
CAutomatic original size detection.
$2 in 1 Copy
CTo make a 1-Sided copy (full size or reduction), from two 1-Sided originals side-by-side.
%Duplex Copying (DA-AR201)
CThe i-ADF allows you to copy 2-sided originals either manually or automatically.
2. Components
CSet the originals up to the upper limit arrow.
ADF (DA-AS180)
i-ADF (DA-AR201)
ADFTray
i-ADFTray
Original Guides
Original Guides
Adjust to the original’s width
Adjust to the original’s width
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
3. Operation
I Operation Procedure
ADF/i-ADF
Face-Up
( )
1 2 3 4
For Duplex Copy
(If required)
Number of
Copies
Press
START
Place the
Original
Inappropriate Originals
CPaste-ups
CPaper with a smooth surface such as glossy CPressure sensitive or carbon backed papers
and coated papers
CTransparencies
CPaper with excessive curl
CStapled originals
COriginals with a lead edge that is “creased”,
“folded”, “punched” or “glued”
CFreshly printed copies from a laser printer
CTo copy these kinds of originals, use the Platen Glass instead.
NOTE
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Adding Paper (J)
I 550-Sheet Paper Tray
Pull the Paper Tray out.
1
Place the paper with the copying
surface facing upward.
Special papers, like glossy paper, mailing
labels and transparencies cannot be used
in the paper tray.
2
3
4
Use the Sheet Bypass for special paper.
Make sure paper is not loaded
above the overfill indicator located
in the Paper Tray.
Firmly push the Paper Tray back
into the copier.
CDo not use paper with folds or wrinkles.
ATTENTION
Refer to page 35 for details on adjusting the paper tray size.
CUnused paper should always be placed into a bag and the opening should be sealed
for storage.
If the paper is left exposed, problems such as paper curl, paper jams, wrinkles or
loss of copied image quality may occur.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving/U13
Adding the Toner and Replacing Waste Toner Container (?)
Open the Front Cover.
1
Remove the Waste Toner Container by
slowly pulling it towards the left as
illustrated.
2
Seal the container with the enclosed
cap and dispose of it properly.
3
Cap
# Turn the empty Toner Bottle
1
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol )
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.
4
2
Note: To prevent toner spill, ensure
that the key is facing upwards
before removing the toner bottle.
$ Pull the empty Toner Bottle out.
Note: If the bottle will not pull out from
the machine, turn the bottle
J
?
slightly in either direction to
release the key and try it again.
Continued on the next page...
CFor optimum copy quality use the recommended Panasonic toner. Store toner in a cool
dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
CWhen U13 is displayed the Add Toner Warning Indicator will begin to flash.This message
is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).
This message will continue to be displayed until the bottle is replaced. When the count-
down counter reaches 0, the copier will stop operating. To clear the message and enable
the copier to operate, replace the empty toner bottle with a new one.
ATTENTION
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Adding the Toner and Replacing Waste Toner Container (?)
# Shake the new Toner Bottle four
or five times to loosen the
contents.
2
5
1
$ Remove the cap from the Toner
Bottle.
# Align the Key of the bottle, also
represented by the Arrow mark
(Unlocked symbol ) visible on
the end of the Toner Bottle with
the Arrow mark on the machine.
6
1
Note:To prevent toner spill,
ensure that the key is facing
upwards before installing the
2
2-1
2-3
bottle.
$ Insert the bottle as far as it will
go, then turn it clockwise (160°,
approx. 1/2 turn) until it locks
(Locked symbol ).
2-2
Incorrect
Correct
Note: If the bottle is not inserted
all the way into the machine
as illustrated, turn the bottle
slightly in either direction to
engage the key and try it
again.
Install a new Waste Toner
Container.
7
Close the Front Cover.
8
CDo not reuse the toner from the Waste Toner Container.
ATTENTION
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Removing a Misfed Paper
I Paper Misfeed Indicators and Locations
When a paper misfeed occurs, the misfeed indicator and the misfeed
location(s) will be displayed on the panel display.
I Misfeed Indicator
For DP-2010E
For DP-1510P/1810P
Paper Misfeed Locations
A: ADF (see page 51), i-ADF(see page 50)
(J70, J71)
B: Copier (Paper Exit, Paper Entry/Transport,
ADU) areas (see page 46-48) (J51 - J59,
J80)
C: Paper Feed Module (see page 49)
(J00 - J50, J81-J89)
I
CMake sure that the misfeed indicator goes off after removing the misfed
paper.
NOTE
CThe misfeed indicator will not go off if the paper is still jammed in the copier.
Check again and remove all misfed paper.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Removing a Misfed Paper
I Paper Exit Area
CMake sure that the misfeed indicator
goes off after removing all misfed
paper.
For DP-1510P/1810P
For DP-2010E
Remove the misfed paper.
1
CMake sure that the misfeed indicator goes off after removing all misfed paper.
ATTENTION
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
I Paper Entry/Transport Area
CMake sure that the misfeed indicator
goes off after removing all misfed
paper.
For DP-1510P/1810P
For DP-2010E
Open the Right Cover.
1
Remove the misfed paper.
2
3
4
If copy paper is fed far into the copier:
#Turn the right paper clearing knob.
$Remove the misfed paper.
#Open the Heat Roller Cover.
$Remove the misfed paper.
%Close the Right Cover.
Caution:This fuser area may be
hot.
Caution
heated
surface
I
CMake sure that the misfeed indicator goes off after removing all misfed paper.
ATTENTION
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Removing a Misfed Paper
I
ADU Area (For DP-2010E only)
CMake sure that the misfeed indicator
goes off after removing all misfed
paper.
Open the Right Cover.
1
Remove the misfed paper.
2
3
If copy paper is fed far into the copier;
#Turn the right paper clearing knob.
$Remove the misfed paper.
Close the Right Cover.
4
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
I Paper Feed Module
CMake sure that the misfeed indicator
goes off after removing all misfed
paper.
For DP-1510P/1810P
For DP-2010E
#Pull the paper tray out.
$Remove the misfed paper.
%Return the Paper Tray to the original
position.
1
#Open the Feed Cover.
$Remove the misfed paper.
%Close the Feed Cover.
2
I
CMake sure that the misfeed indicator goes off after removing all misfed
ATTENTION
paper.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Removing a Misfed Paper
I i-ADF (For DP-2010E only)
CMake sure that the misfeed indicator
goes off after removing all misfed
paper.
#Open the Entry Cover.
$Remove the misfed paper.
%Close the Entry Cover.
1
2
#Open the ADF Cover.
$Remove the misfed paper.
%Close the ADF Cover.
&Open and close the Entry Cover to
reset the error.
#Lift up the ADF Input Tray.
$Open the ADF exit cover.
%Remove the misfed paper.
&Close the ADF exit cover.
(Close the ADF Input Tray.
3
CPush the tab on the centre of the Entry Cover to close it.
CTo prevent original(s) damage, please make sure to open the ADF Cover before
ATTENTION
removing misfed original(s).
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
I ADF
CMake sure that the misfeed indicator
goes off after removing all misfed
paper.
For DP-1510P/1810P
#Open the Entry Cover.
$Remove the misfed paper.
%Close the Entry Cover.
1
2
#Open the ADF Cover.
Note: To prevent damaging the originals,
open the ADF Cover before
removing the misfed original(s).
$Remove the misfed paper.
%Close the ADF Cover.
&Close the ADF.
I
CTo prevent original(s) damage, please make sure to open the ADF Cover
ATTENTION
before removing misfed original(s).
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before Calling Service
Check
Action
Unit Does Not Operate
Check if the Power Switch is turned On and
that the power cord is connected into the
outlet.
Does the display light?
(No)
(Yes)
(Yes)
(Yes)
(Yes)
(Yes)
(Yes)
Does the Energy Saver key flash (or light)
and displays are turned OFF? (See page
Press Energy Saver key on the Control
Panel.
24)
(No)
Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14, U20 and U21)
(See page 54)
Perform actions in accordance with each
message.
(No)
Does the add paper indicator and message
appear on the display? (J)
Add paper. (See page 42)
∗
(No)
Does the paper misfeed indicator and
message appear on the display? (I)
Remove the misfed paper. (See page 45)
(No)
Does E#-## indicator and message appear
on the display?
Turn the copier Off, then On. If the Error
Code does not clear, call for service.
∗
When the Add Toner Warning Indicator begins to flash or is lit, replace the toner bottle with a new
one. After this warning is activated, machine operation will begin with the Toner Charging Mode
(approximately 3 minutes to complete) each time the power switch is turned Off then On or if the
Front/Right Cover is opened and then closed.
∗
Note: When the warning indicator starts flashing, a 300-sheet count-down counter is activated,
and upon reaching 0 the machine will stop operating. The 300-sheet counter is based on
6 % fill, depending on the density some pages may print Blank.
Machine operation and displays are as follows:
1. When turning the power switch to On or opening and then closing the Front/Right Cover, the
machine starts to warm-up and the LCD displays:
PLEASE WAIT...
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
2. The Toner Charging Mode starts and the LCD displays:
CHARGING TONER
AddToner Warning Indicator:
CFlashing = Toner Bottle is nearly empty
CLit
= Toner Bottle is empty
3. This message is displayed for approximately 200 seconds.
CHARGING TONER
❚ ❚ ❚ ❚ ❚
Each “ ❚ ” is approximately 10 sec.
∗
4. This massage will continue to be displayed until the warm-up cycle is completed, and if the toner
bottle was replaced. Upon completion, the Add Toner Warning Indicator automatically turns Off.
Check
Action
Light Copies
Press the Darker key until the indicator
LED is set to Darker. (See page 12)
Does the exposure indicator say “Lighter”?
(Yes)
(Yes)
(No)
Does the add toner indicator and message
appear on the display? (?)
Add Toner. (See page 43)
Marked Copies
Is the copier Platen Glass or Platen Cover
dirty?
Clean the Glass or Platen Cover.
(See page 54)
(Yes)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
User Error Codes (U Code)
The self-diagnostic functions detect troubles in the important components of the copier.
When any trouble occurs, the copier stops.
Code
U01
Display Message
CLOSE FRONT/RT COVER
CLOSE FEED COVER
Check Points
Front Cover is open.
U07
Feed Cover is open.
TONER IS RUNNING LOW
NO WASTE TONER BOX
1.Toner Cartridge is incorrectly installed.
2. Low Toner or No Toner Waste Container.
U13
1.Toner Waste Container is incorrectly
installed.
2.Toner Waste Container is full of toner.
U14
WASTE TONER BOX IS FULL
U20
U21
CLOSE ADF COVER
ADF Cover is open.
While the copier is initializing, the ADF
Cover was opened. (Optional ADF installed)
CLOSE PLATEN COVER
I If the measures outlined above do not solve the problem, call your Service provider.
Copier Care
I As a rule, clean weekly.
Platen/Platen Cover
Platen
Cover
#Wipe marks off with a cloth and a neutral
detergent.
$Wipe again with a dry cloth.
Platen
(Glass)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
I DP-1510P/1810P/2010E (Copier)
Type
Desktop
PlatenType
Fixed
Acceptable Originals
Copying Method
Fixing Method
Imaging Method
Resolution
Sheets, Books (max. A3)
Laser Electrophotography
Heat Roller Fixing
Dry-Type Single component imaging
Max. 600 dpi
Maximum Copy Size
Void Area
A3
Max. 5 mm
Warm UpTime
First CopyTime
Multi-Copy Speed
Approx. 30 seconds (20°C)
Approx. 6.5 seconds (A4 , from 1st tray)
DP-1510P : 15 cpm (A4 size)
DP-1810P : 18 cpm (A4 size)
DP-2010E : 20 cpm (A4 size)
Enlargement Ratios
Reduction Ratios
Paper Feed
Preset: 115 %, 122 %, 141 %, 173 %, 200 %
Variable: from 101 to 200 % in 1 % increments
Preset: 87 %, 82 %, 71 %, 58 %, 50 %
Variable: from 99 to 50 % in 1 % increments
Paper Tray (550 sheets × 1) + Sheet Bypass (50 sheets)
2nd Paper Feed Module (550 sheets - option)
3rd Paper Feed Module (550 sheets - option)
4th Paper Feed Module (550 sheets - option)
Paper Tray: 60 - 90 g/m2
PaperWeight
(Sheet Bypass: 56 - 128 g/m2)
Quantity Selector
Max. 999 sheets (Output Tray capacity is 250 sheets)
AC 220 - 224 V, 50/60 Hz, 6.0 A
Electrical Consumption
Energy Consumption
Dimensions (W × D × H)
Max. 1.2 kW, 2.2 Wh in Sleep Mode
DP-1510P/1810P: 588 × 605 × 458 mm
DP-2010E: 588 × 605 × 458 mm
DP-1510P/1810P: 41 kg
Weight
DP-2010E: 42 kg
Temperature: 10 - 35°C Relative Humidity: 45 - 85 %
Operating Environment
(However, the humidity should be 70 % or less at a temperature of 30°C, and
the temperature should be 30°C or less at a humidity level of 85 %.)
CSpecifications are subject to change without notice.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
I ADF (DA-AS180)
DA-AS180
A4, A5: 50 sheets (70 g/m2)
Tray Capacity
FLS/B4, A3: 30 sheets (70 g/m2)
Paper Size
A5/A4/FLS/B4/A3
50 – 110 g/m2
PaperWeight
Electrical Requirements
Dimensions (W × D × H)
Weight
Supplied from the copier
558 × 501 × 112 mm
5.0 kg
I i-ADF (DA-AR201)
DA-AR201
A4, A5: 50 sheets (70 g/m2)
Tray Capacity
FLS/B4, A3: 30 sheets (70 g/m2)
Paper Size
A5/A4/FLS/B4/A3
50 – 110 g/m2
PaperWeight
Electrical Requirements
Dimensions (W × D × H)
Weight
Supplied from the copier
552 × 520 × 135 mm
9.3 kg
I 2nd/4th Paper Feed Module (DA-DS182)
DA-DS182
Paper Size
A5/A4/FLS/B4/A3
60 – 90 g/m2
PaperWeight
Electrical Requirements
Dimensions (W × D × H)
Weight
Supplied from the copier
550 × 155 × 585 mm
9.5 kg
I 3rd Paper Feed Module (DA-DS183)
DA-DS183
Paper Size
A5/A4/FLS/B4/A3
60 – 90 g/m2
PaperWeight
Electrical Requirements
Dimensions (W × D × H)
Weight
Supplied from the copier
550 × 155 × 585 mm
9.5 kg
CSpecifications are subject to change without notice.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Options and Supplies
I
The DP-1510P/1810P/2010E is a digital photocopier which can produce images with great clarity.
Furthermore, its copying functionality can also be greatly enhanced by the addition of the following
options and supplies.
We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
I Options
Part Name
Part No.
DA-AS180
DA-AR201
DA-DS182
DA-DS183
Remarks
Also referred as ADF
Automatic Document Feeder
Inverting Automatic Document Feeder
2nd/4th Paper Feed Module
3rd Paper Feed Module
Also referred as i-ADF (For DP-2010E only)
4th Paper Feed Module is for DP-2010E only
3rd Paper Feed Module is for DP-2010E only
For Electronic Sorting and Sort Printing
(For DP-1810P/2010E)
For Sort Printing (For DP-1510P)
Image Memory (8 MB)
DA-SM8B
DA-SM16B
DA-SM64B
DA-SM28B
For Electronic Sorting and Sort Printing
(For DP-1810P/2010E)
For Sort Printing (For DP-1510P)
I
mage Memory (16 MB)
For Electronic Sorting and Sort Printing
(For DP-1810P/2010E)
For Sort Printing (For DP-1510P)
Image Memory (64 MB)
Image Memory (128 MB)
For Electronic Sorting and Sort Printing
(For DP-1810P/2010E)
For Sort Printing (For DP-1510P)
I For Printer
Part Name
Part No.
Remarks
Printer Controller for PCL6.
(For Network Printing, DA-NE200 is also required)
PCL6 Emulation Kit
DA-PC210
I For Network Printing
Part Name
Part No.
Remarks
Network Interface Board
10/100 Ethernet Interface/
Internet Fax Kit
DA-NE200
I Supplies
Part Name
Part No.
Remarks
Waste Toner Container included
Toner Bottle
DQ-TU10C
PCL6 is a Page Description Language of the Hewlett-Packard Company.
∗
NOTE
57
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
For Service, Call:
Matsushita Electric Industrial Co., Ltd.
Osaka 542-8588, Japan
S0602-1062
DZSD001730-1
June 2002
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|