F566364
Operating Instructions
Air Conditioner
Indoor Unit
CS-PC12JKF
Outdoor Unit
CU-PC12JKF
٧ ~ ٢ ENGLISH
8 ~ 13
Before operating the unit, read these
operating instructions thoroughly and
keep them for future referrence.
ﻊ ﻳ ﺮ ﺳ دﻟﻴﻞ QUICK GUIDE
© Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2008.
Unauthorized copying and distribution is a violation
of law.
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing
Panasonic Air Conditioner
REGULATORY INFORMATION
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
TABLE OF CONNTENTS
SAFETY PRECAUTIONS
8
REGULATORY INFORMATION
9
OPERATION CONDITION
Use this air conditioner under the following temperature range
PRODUCT OVERVIEW &
OPERATIONS
10~11
Indoor
*DBT
Outdoor
Temperature (°C)
CARE & CLEANING
TROUBLESHOOTING
QUICK GUIDE
*WBT
23
*DBT
*WBT
31
12
Maximum
Minimum
32
16
55
16
COOLING
11
11
13
* DBT: Dry bulb temperature
* WBT: Wet bulb temperature
BACK COVER
NOTE :
The illustrations in this manual are
for explanation purposes only and
may differ from the actual unit. It is
subjected to change without notice
for future improvement.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Pb
• Do not switch ON the unit when waxing the floor. After waxing, aerate the room properly before operating the unit.
• Do not install the unit in oily and smoky areas.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT OVERVIEW & OPERATIONS
Auto OFF/ON button
•
Used when remote control is misplaced
or malfunction.
Air Filters
Action
Mode
Press once.
Auto
Press and hold until 1 beep is
heard, then release.
Cooling
Front panel
Press the button to turn off.
INDICATOR
(Green)
(Orange)
Horizontal airflow
direction louver
• Manually
adjustable.
Receiver
Vertical airflow
direction louver
• Do not adjust
by hand.
Maximum distances: 8m
Remote control
display
AUT
O
COOL
DR
Y
SPEED
SWING
OFF
OFF
TIMER
ON
TIMER
OFF/ON
ON
SET
1
2
3
OFF
CANCEL
RESET
CLOCK
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TO SET THE TIMER
TO TURN ON OR OFF THE
UNIT
POWER
• To turn ON or OFF the unit at a preset time.
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/
stopping improperly.
TIMER
Select ON or
OFF timer.
Set the time.
Confirm.
TO SET TEMPERATURE
• For cool and dry modes, the range of temperature for
selection is 16°C ~ 30°C.
• To cancel ON or OFF timer, press
press
or
then
.
• Operating the unit within the recommended
temperature could induce energy saving.
COOL mode : 26˚C ~ 28˚C.
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
TO SELECT OPERATION MODE
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control Preparation at back
cover.
AUTO mode - For your convenience
• Unit selects the operation mode according to the
room temperature.
• Once auto mode is selected, the unit will operate at
the standard setting temperature.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
.
Room
Operation Standard setting
temperature
mode
Cool
Dry
temperature
23°C & above
Below 23°C
25°C
OPTIONNAL SETTINGS
22°C
• To change the standard setting temperature, press
Press and hold for 5 seconds to dim or
restore the unit’s indicator brightness.
for “HI” or
for “LO”.
Operation mode
HI (+2°C)
LO (-2°C)
23°C
Press and hold for approximately 10
seconds to show temperature setting in
°C or °F.
Cool
Dry
27°C
24°C
20°C
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
Press and hold for approximately 5 seconds
to show 12-hour (am/pm) or 24-hour time
indication.
CLOCK
Press to restore the remote control’s default
setting.
TO SELECT FAN SPEED
(3 OPTIONS)
RESET
SET
Not used in normal operations.
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
TO ADJUST VERTICAL AIRFLOW
DIRECTION (5 OPTIONS)
• Keeps the room ventilated.
• If AUTO is set, the louvers swing
up/down automatically.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING
•Switch off the power supply before cleaning.
•Do not touch the aluminium fin, sharp parts may cause injury.
CAUTION
HINT
WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance have to be carried out at regular intervals.
Please consult authorized dealer.
FRONT PANEL
ALUMINIUM FIN
Remove Front Panel
• Raise and pull to remove the front
panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front
panel to close it securely.
Remove
INDOOR UNIT
AIR FILTERS
Wipe the unit gently with a soft, dry
cloth.
• Air filters cleaning is needed every two weeks.
• Wash/rinse the filters gently with water to avoid
damage to the filter surface.
• Dry the filters thoroughly under the shade, away
from fire or direct sunlight.
• Replace any damage filter.
FOR SEASONAL INSPECTION AFTER EEXXTTEENNDDEEDD
NON-USE
• Checking of remote control batteries.
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then please consult
authorized dealer under the following conditions:
• No obstruction at air inlet and air outlet vents.
• Abnormal noise during operation.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
Cooling: ≥ 8°C
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
• Timer indicator blinks.
FOR EXTENDED NON-USE
• Turn off the power supply.
• Remove the remote control batteries.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
The folllowinngg symptooms do nnot iinnddiiccaatte mmaallffuunnccttiioonn..
Symptom
Cause
Mist emerges from indoor unit.
Water flowing sound during operation.
The room has a peculiar odour.
• Condensation effect due to cooling process.
• Refrigerant flow inside the unit.
• This may due to damp smell emitted by the wall, carpet, furniture or
clothing.
Indoor fan stops occasionally during automatic • This helps to remove the surrounding odours.
fan speed setting.
Operation is delayed a few minutes after
restart.
• The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam.
Timer indicator is always on.
Cracking sound during operation.
• Condensation or evaporation occurs on pipes.
• The timer setting repeats daily once set.
• Changes of temperature cause the expansion/contraction of the unit.
Checkk the folllowinng befoorre calliing forr sserviicing.
Symptom
Check
Cooling operation is not working efficiently.
• Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the filters.
• Clear any obstruction at the air inlet and air outlet vents.
Noisy during operation.
• Check if the unit has been installed at an incline.
• Close the front panel properly.
Remote control does not work.
• Insert the batteries correctly.
(Display is dim or transmission signal is weak.) • Replace weak batteries.
The unit does not work.
• Check if the circuit breaker is tripped.
• Check if timers have been set.
The unit does not receive the signal from the
remote control.
• Make sure the receiver not obstructed.
• Certain fluorescent lights may interfere with signal transmitter. Please
consult authorized dealer.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ﻊ ﺳﺮﻳ دﻟﻴﻞ //QQUUIICCKK GGUUIIDDEE
ﺪ ﺑﻌ ﻋﻦ اﻟﺘﺤﻜﻢ وﺣﺪة ﲢﻀﻴﺮ • Remote Coontrol Preeparation 1
2
ﺐ اﺳﺤ • Pull out 1
2
(
واﺣﺪة ﺳﻨﺔ ﳌﺪة اﺳﺘﺨﺪاﻣﻬﺎ ﳝﻜﻦ ) R03 أو AAA ﺑﻄﺎرﻳﺎت ادﺧﻞ • Insert AAA or R03 batteries (can be used ~ 1 year)
3
4
3
4
5
6
ء اﻟﻐﻄﺎ اﻏﻠﻖ • Close the cover CLOCK
اﺿﻐﻂ • Press CLOCK 5
6
TIMER
ON
ﺖ اﻟﻮﻗ اﺿﺒﻂ • Set time SET
1
2
3
ﺪ ﺗﺄﻛ • Confirm OFF
SET
CANCEL
RESET
CLOCK
1
.
اﳌﺮﻏﻮب اﻟﻮﺿﻊ اﺧﺘﻴﺎر Select the desired mode.
AUTO
DRY COOL
FAN
AUTO
COOL
DRY
SPEED
AIR
SWING
OFF
OFF
ON
2
3
TIMER
TIMER
OFF/ON
.
اﻟﺘﺸﻐﻴﻞ اﻳﻘﺎف /ﺑﺪء Start/stop the operation.
MODE
FAN SPEED
AIR SWING
TEMP
TIMER
ON
SET
1
2
3
OFF
SET
CANCEL
RESET
.
اﳌﺮﻏﻮﺑﺔ اﳊﺮارة درﺟﺔ اﺧﺘﻴﺎر Select the desired temperature.
CLOCK
Panasonic Corporation
Printed in Malaysia
F566364
OSYW0812-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|