Palsonic Flat Panel Television TFTV 510 User Manual

OWNER'S MANUAL

51CM CORDLESS REMOTE LCD TV/MONITOR

MODEL: TFTV-510

Type Tested

Electrical

Safety

AS/NZ 3250

Standards Australia

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

TV/Monitor

High brightness/High contrast LCD

Resolution: 640 x 480 @ 60Hz

Brightness: 450 cd/m²

Contrast Ratio: 350:1

Multi digital processing & Picture improvement circuit

English/Chinese on-screen menu display

Sleep Timer

Backlight Adjustment

Channel Edit

Low power consumption/Low voltage

PC audio input

VGA input

AV input

S-VIDEO input

Earphone jack

Download from Www.Somanuals.com. All Manuals Search And Download.

Cautions for safety

When any unusual situation occurs, turn off the power supply

at once and remove the plug from the wall outlet. Contact a

qualified service department in your local area.

Do not expose this unit in the rain or spatter by liquid, Do not

use this product near water- for example, near a bathtub,

washbowl, kitchen sink, or laundry tub, in a wet basement, or

near a swimming pool, and the like. Do not use immediately

after moving from a low temperature to high temperature

environment, as this causes condensation, which may result

in fire, electric shock, or other hazards.

1. Heat sources - Keep the product away from heat sources

such as radiators, heaters, stoves other heat

generating products (including amplifiers).

2. Requirement of environment temperature;

0⁰C~50⁰C for storage;

5⁰C~40⁰C for working.

1. The vents and other openings in the cabinet are designed

for ventilation. Do not cover or block these vents and

openings since insufficient ventilation can cause

overheating and/or shorten the life of the product.

2. Do not place the product on a bed, sofa, rug or other

similar surface, since they can block ventilation

openings.

3. This product is not designed for built-in installation; do

not place the product in an enclosed place such as a

bookcase or rack, unless proper ventilation is provided

or the the manufacturer's instructions are followed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cautions for safety

(continued)

Cautions for safety

Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

1. Do not place the product on an unstable trolley,

stand, tripod or table. Placing the product on an

unstable base can cause the product to fall,

resulting in serious personal injuries as well as

damage to the product.

2. Use only a trolley, stand, tripod, and bracket or table

recommended by the manufacturer or sold with

the product.

When relocating the product placed on a trolley, it must

be moved with the utmost care. Sudden stops,

excessive force and uneven floor surfaces can cause

the product to fall from the trolley.

The power cords must be routed properly to prevent

people from stepping on them or objects from resting on

them. Check the cords at the plugs and product. Power

supply cords should be routed so that they are not likely

to be walked on or snagged by items placed upon or

against them. Pay particular attention to cords at doors,

plugs, receptacles, and the point where they exit from

the product.

If the power cord or the plug is damaged contact a

qualified service department for service.

Download from Www.Somanuals.com. All Manuals Search And Download.

This TV set can operate on a power of ~240V, 50Hz. You must not use any

other type of power supply.

Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as

this can result in a risk of fire or electric shock.

High Voltage exists in this TV set. Do not remove the cover.

In case the product needs replacement parts, make sure

that the service person uses replacement parts specified by

the manufacturer, or those with the same characteristics

and performance as the original parts. Use of unauthorised

parts can result in fire, electric shock and/or other danger.

The LCD panel used in this product is made of glass.

Therefore, it can break when the product is dropped or

impacted upon by other objects. Be careful not to be injured

by broken glass pieces in case the LCD panel breaks.

Don't try to push anything into the cabinet or place any

vessel with water on the TV set.

During a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet

and disconnect the antenna. This will prevent damage to the

equipment due to lightning and power-line surges.

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of controls

Front/Back

Front

1. To input signal select

2. To access menu

3. CH+/-: to select a higher/lower numbered channel or cycle through the menus.

4. VOL+/-: press to raise/lower the volume or adjust the selected item.

5. Power on/standby

6. Indicator: standby mode: red

power on: yellow

7. Remote sensor

Download from Www.Somanuals.com. All Manuals Search And Download.

Back

AUDIO IN

PHONE

SPEAK OUT

TUNER

POWER IN

Antenna input

AC Power input

S-VIDEO input

VGA input

Earphone

jack

PC audio

line in

Speaker

output

Video/audio input

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

Power on/standby

Channel select

Muting Sound

In PC mode, auto correct picture

Clock/Timer setting

Press the button to switch the

set among TV/AC/S-VIDEO/PC

Previous channel

To enter into menu

Press to adjust picture

(including brightness,

contrast, saturation and

sharpness).

On-screen display

Channel up/down selector. In

menu operations, used to select

item upwards or downwards.

Volume up/down selector.

In menu operation adjust

the selected item or access

the sun-menu.

Setting sleep timer

To select different picture modes

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery Installation

Please install the batteries before using the remote control.

Replace the battery

cover.

Install two "AA"

batteries matching

the +/- polarities of

the battery to the +/-

marks.

Open the battery cover.

Effective remote range

Notes:

1. When the remote control will not be used for a long

period of time or when the batteries are worn out,

remove the batteries.

2. Do not drop, dampen the remote control.

3. Do not disassemble the remote control.

4. There should be no obstacle between the TV and

the transmitter.

5. Use the remote control within the effective range

as the left figure.

6. If the remote control does not work, please check

whether the batteries are exhausted or the

polarity is wrong.

7. When direct sunlight, and incandescent lamp,

fluorescent lamp or any other strong light shines

on the remote sensor of the TV, the remote

operation may be unstable.

8. Different batteries have different features. Please

don't mix different- type batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Antenna connection/Power connection/Elevation adjustment

Antenna connection

Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must

be used. The exact type and position of the aerial will depend upon your particular area.

Tuner

Notes:

Turn off the power firstly when you connect an outdoor antenna to the antenna input terminal.

When installing an outside antenna system, extreme care should be taken to keep from

touching power lines or circuits as contact with them might be fatal. In thunder and lightning

weather, please disconnect the outdoor antenna to avoid thunder/lightning strike.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Connection

To the wall outlet

Power cord

POWER IN

Notes:

1. This TV can only be operated on a power of AC 240V 50 Hz.

2. Please remove the power plug from the wall outlet when the TV will not be used for

a long period of time.

Elevation adjustment

You can adjust the angle of the LCD TV as follows.

The elevation can be adjusted from -5⁰to +15⁰.

15⁰

-5⁰

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

(continued)

Connecting video/audio equipment

Composite VIDEO Signal Connection (RCA)

Connect the composite signal terminal on the TV to the output of AV equipment through composite

cable as illustrated.

If you select the video signal, please set the input signal source to AV mode (please refer to page

13).

To video input

To video output

VCR, DVD etc.

To audio outputs

To audio inputs

Yellow (video)

White (audio, L)

Red (audio, R)

AUDIO IN

PHONE

SPEAK OUT

TUNER

POWER IN

Back panel

S-VIDEO Signal Connection

Connect the S-video terminal on the TV to the output of AV equipment through S-video cable as

illustrated.

If you select S-video signal, please set the input signal source to S-video mode (please refer to

page 13).

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Carefully check the terminals for position and type before making any connections.

2. Loose connectors can result in image or colour problems. Make sure that all connectors are securely

inserted into their terminals.

3. When connecting an external device, turn off the power of the main unit first to prevent any possible

damage.

To S-VIDEO input

To S-VIDEO output

VCR, DVD etc.

To audio outputs

To audio inputs

White (audio, L)

Red (audio, R)

AUDIO IN

PHONE

SPEAK OUT

TUNER

POWER IN

Connecting the PC input terminals

Connect the D-sub signal terminal on the TV to the output of PC equipment through Min D-sub 15

pin cable as illustrated. Connect a cable, which matches the audio output terminal on the computer.

If you select PC signal, please set the input signal source to PC mode (please refer to page 13).

To VGA output

To audio output

To VGA input

To audio input

Equipment with

VGA output

Notes:

1. The display native resolution is 640 x 480. If the signal resolution exceed the native

resolution, it may not be possible to show fine detail with sufficient clarity.

2. We recommend that you do not set the vertical scanning frequency for PC signals to

exceed 60Hz otherwise it maybe display incorrectly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

Turning On/Turning Off/Selecting input signal/Menu introduction

Turning On

Insert the power plug to wall outlet, then the red indicator lights

up and the unit is in STANDBY mode.

Press the POWER button on the unit's control panel or the

button on the remote control to turn on (the indicator turns to

yellow).

SOURCE

CH-

The TV will display the program before turning off last time.

VOL-

POWER

VOL+

CH+

Turning Off

Press the POWER on the unit or the button

on the remote

control again. Then the TV is in STANDBY mode. The indicator

turns to red.

This TV set can automatically turn off (standby) by Sleep timer.

Note:

Please unplug the power cord from the wall outlet if not in

use.

Selecting input source

SOURCE

Press the SOURCE button on the unit or on the remote control.

The screen displays AV/S-Video/PC/TV. Select your desired

CH+

OSD

input signal.

VOL-

VOL+

CH-

To resume TV mode, press the SOURCE button on the unit or

on the remote control repeatedly until the screen displays TV.

You can also press digit buttons or CH+/- buttons to resume TV

mode.

3 ^{Press OSD button, the screen displays current mode. Press}

again to cancel OSD.

All buttons in the manual are buttons on remote

control if without special indication.

Note:

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu introduction

In TV mode, there are three menu pages. In MENU operations, the CH+/- buttons are used to select

item (selected item will turn to white), the VOL+/- buttons are used to adjust or confirm selected item.

But in PC mode, only one menu can be accessed.

During MENU operation process, pressing MENU button repeatedly or waiting for 5 seconds can

exit menu.

Bright

To adjust picture's brightness.

To adjust picture's contrast.

Press MENU

button

Contrast 100

Saturation80

To adjust picture's colour saturation.

Sharpness

Color Hue

Backlight

To adjust picture's sharpness.

To adjust picture's colour hue.

(This item is available only in NTSC)

Bright

To adjust picture's backlight (Nature, Bright, Soft).

Press MENU button

To select the screen to display blue background or not when no signal inputs

To select OSD menu language.

Blue Background Disable

Press MENU

button twice

Language

Color Sys

Sound Sys

Sound Set

English

Auto

To adjust colour system.

B/G

To adjust sound system.

(In AV or S-Video mode, the item is grey and you can not select it).

Bass

To adjust the Bass

To adjust the Treble

Treble

Press MENU button

To start auto search.

Auto search

Fine tuning

Press MENU

button third

time

Note: In AV or S-Video mode,

the menu is not accessible.

To enter into fine tuning menu.

To enter into channel search menu.

To skip current channel or not.

Channel search

Skip setting

To exchange current channel with

the selected target channel.

Channel edit

To adjust picture's bright and contrast in PC mode.

(not affect picture in TV or AV mode)

Bright

Press MENU

button in

PC mode

Contrast

Horizontal

Vertical

Phase

Frequency

Color

If VGA input signal is not standard, you can adjust these two items

until proper picture position is obtained.

If the best picture can not be obtained after many times of auto

correction, you can adjust these two items to obtain the best picture.

1334

9300K

Bright

To adjust colour temperature between 9300K 7300K 6500K,

5000K and User.

Backlight

To adjust backlight. (Nature, Bright, Soft)

Note: In PC mode, only this menu can be accessed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in TV mode

Channel preset

Auto search/Channel search/Fine tuning/Skip setting

Auto search

Press MENU button third times to

access menu (Refer to Menu

Auto search

Fine tuning

Channel search

Skip setting

Channel edit

introduction on page 14).

SOURCE

VOL

POWER

Press CH+/- to select Auto search

item.

CH-

VOL-

Press VOL+/- buttons to start Auto

search and all active programs will

be memorised.

CH+

VOL+

During the process of Auto Search,

pressing MENU button can stop

Auto Search.

Channel searching ...VHFH 5

If desired channel can not be preset by Auto search or if you

would like to preset channels to specific position numbers one by

one, use Channel search function.

Channel search

DIGIT

CH+

Press DIGIT buttons or CH+/-

buttons to select desired channel

number.

Auto search

Fine tuning

Channel search

Skip setting

Channel edit

Press MENU button third times to

enter into menu (refer to Menu

introduction on page 14).

VOL-

VOL+

CH-

Press CH+/- to select Channel

search item. Press VOL+/-

buttons to access the sub-menu,

then press VOL+/- to start Channel

search.

Channel searching ...VHFH 0

Pressing MENU button can exit

Channel search sub-menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

To conduct the following operation, you must select TV input signal

(Refer to Selecting input signal on page 13).

Fine tuning

Press DIGIT buttons or CH+/-

buttons to select the desired

channel.

Auto search

Fine tuning

Channel search

Skip setting

Channel edit

SOURCE

VOL

POWER

Press MENU button third times to

access menu. (refer to Menu

introduction on page 14).

CH-

VOL-

CH+

VOL+

Press CH+/- to select Fine tuning

item. Press VOL+/- to access the

sub-menu. Then press VOL+/- to

start Fine tuning to obtain best

picture and sound.

Fine Tuning

VHFH 5

Skip setting

After Channel preset, You can skip unwanted channels by

using this function.

DIGIT

CH+

1 ^{Use DIGIT buttons or CH+/- buttons}

Auto search

to select an unwanted channel.

Fine tuning

Channel search

Press MENU button third times to

access the menu. (refer to Menu

Skip setting

Channel edit

introduction on page 14).

VOL-

VOL+

CH-

3 ^{Press CH+/- buttons to select Skip}

setting item. Press VOL+/- buttons

to access the sub-menu. Press

VOL+/- to select Skip. Now the

channel will be skipped when you

browse program by CH+/-.

Skip Set

VHFH 4

Skip

4 ^{To restore the skipped channel,}

please select the skipped channel

by DIGIT buttons and then access

the Skip Set sub-menu to set skip

to save.

Skip Set

VHFH 4

Save

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in TV mode

(continued)

Channel preset

Channel edit

Channel Edit

After Auto Channel Preset, this function is for you to edit the

order of programs conveniently according to your favourite.

Use DIGIT buttons or CH+/-

buttons to select current

Auto search

SOURCE

VOL

POWER

Fine tuning

Channel search

channel number.

Skip setting

Channel edit

CH-

VOL-

CH+

VOL+

Press MENU button third times

to access menu (refer to Menu

introduction on page 14).

3 ^{Press CH+/- buttons to select}

Channel edit item. Press

Current Channel

Change to

VOL+/- buttons to access the

sub-menu. Press CH+/- buttons

to select a target channel to

exchange with current channel.

Exiting the menu, then the

programs of these two channels

are exchanged.

DIGIT

CH+

VOL-

VOL+

CH-

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel Select

Using DIGIT buttons/Using CH+/- buttons/Using previous channel button

Using DIGIT buttons

To select one-digit channel number:

Press 0-9 digit buttons to select the desired channel. Two

seconds later, the channel is selected.

SOURCE

VOL

POWER

To select two-digit channel number:

CH-

Press -/-- button repeatedly to display -- on the screen.

Press 1-9 buttons to select tens digit. Press 0-9 buttons to

select ones digit (The period of the two presses must be within

2 seconds). Two seconds later, the channel is selected.

CH+

Using CH+/- buttons

1 ^{Press CH+ button, the channel number increases;}

Press CH- button, the channel number decreases.

Using previous channel button

DIGIT

CH+

Press

and previous channel.

button to switch between the current channel

-/--

CH-

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in TV mode

(continued)

Picture adjustment

Press MENU button once to

access the menu (refer to Menu

introduction on page 14).

Bright

Contrast 100

Saturation80

Sharpness

Color Hue

Backlight

Press CH+/- to select item.

Bright

SOURCE

VOL

POWER

3 ^{Press VOL+/- to adjust selected}

item.

CH-

VOL-

CH+

VOL+

Item

Function

Range

0-100

0-6

Bright

To adjust picture's brightness

To adjust picture's contrast

To adjust picture's colour saturation

To adjust picture's sharpness

To adjust picture's colour hue

To adjust the backlight

Contrast

Saturation

Sharpness

Colour Hue

Backlight

0-100

Soft, Nature, Bright

Note: The item Colour Hue is for NTSC only.

CH+

PIC

You can access Brightness

menu, Contrast menu, Saturation

menu, Sharpness menu by

pressing PIC button directly and

adjust brightness, contrast,

saturation, sharpness with VOL+/-

Brightness

Contrast

VOL-

VOL+

P.M

Saturation

CH-

Sharpness

buttons.

Soft

Bright

Nature

You can select picture mode

User mode

by P.M button. There are four

picture modes: Bright, Nature,

Soft and User mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound adjustment

Adjusting sound/Adjusting volume/Muting the sound

Adjusting sound

1 ^{Press MENU button twice to}

Blue Background Disable

access the menu (refer to

Language

Color Sys

Sound Sys

Sound Set

English

Auto

Menu introduction on page 14).

B/G

SOURCE

VOL

POWER

Press CH+/- to select Sound

Set item.

CH-

VOL-

Press VOL+/- to access the

sub-menu. Press CH+/- to

select item and press VOL+/-

to adjust the selected item.

CH+

VOL+

Bass

Treble

Range

0-10

Item

Bass

Function

Adjust bass

Adjust treble

0-10

Treble

Adjusting volume

Press VOL+/- to adjust

Volume

+ 30

volume. Press VOL+ button, the

volume increases. Press VOL-

button, the volume decreases

(Range 0-45).

CH+

VOL-

VOL+

CH-

Muting the sound

If you want to mute the sound,

press button on the remote control.

Press button again to restore. You

can also press VOL+ or VOL- to

restore the sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in TV mode

(continued)

System Setting

Blue screen/OSD Language/Colour system/Sound system

Blue screen

1 ^{Press MENU button twice to access the menu (refer to Menu}

introduction on page 14).

Press CH+/- to select Blue

Background item.

SOURCE

VOL

POWER

Blue Background Disable

Language

Color Sys

Sound Sys

Sound Set

English

Auto

Press VOL+/- to select Enable or

Disable. If you select Enable, the

screen displays blue background

when there is no signal. If you

select Disable, the screen

displays noisy picture when there

is no signal.

B/G

CH-

VOL-

CH+

VOL+

Note: Only when the Blue screen is Enable, the set would be

turned off automatically when there is no signal for 15 minutes.

ODS language

Press MENU button twice to

access the menu (refer to Menu

introduction on page 14).

Blue Background Disable

Language

Color Sys

Sound Sys

Sound Set

English

Auto

B/G

Press CH+/- to select Language

item.

CH+

Press VOL+/- to select language.

VOL-

VOL+

CH-

Colour system

Press MENU button twice to enter into menu (refer to Menu

introduction on page 14).

2 ^{Press CH+/- to select Color Sys}

Blue Background Disable

item.

Language

Color Sys

Sound Sys

Sound Set

English

Auto

Press VOL+/- to select a proper

colour system according to your

area.

B/G

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound system

Press MENU button twice to

access the menu (refer to Menu

introduction on page 14).

SOURCE

VOL

POWER

Blue Background Disable

Language

Color Sys

Sound Sys

Sound Set

English

Auto

Press CH+/- to select Sound sys

item.

CH-

VOL-

B/G

CH+

VOL+

Press VOL+/- to select correct

sound system according to your

area.

Some models are with only one

sound system and in this case the

Sound System does not need to be

adjusted.

CH+

VOL-

VOL+

CH-

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in TV mode

(continued)

Timer setting

Using SLP button/Using CLOCK button

Using SLP button

Press SLP button to display

Sleep menu. Press SLP button

repeatedly to set sleep time

between: 0, 10, 20, 30, 60, 90, 120,

180, 240 minutes. If you select 0

minute, it means the sleep timer

function is turned off.

SOURCE

VOL

POWER

Sleep

CH-

VOL-

CH+

VOL+

Using CLOCK button

Press CLOCK button, the Time

menu appears. Use CH+/-,

VOL+/- to set time.

Time

1: 14

After setting Time menu, press

CLOCK button to display Turn

on menu.

Press CH+/- to select item (hour,

minute, status, the selected item

is displayed in blue). Press

VOL+/- to adjust Turn on time

and Turn on status (OFF, Today,

Everyday).

CLOCK

Turn On 0:00 Status: Today

Today: means the Turn on

setting effects today.

CH+

Everyday: means the Turn on

setting effects everyday.

VOL-

SLP

VOL+

CH-

Press CLOCK again to display

Turn off menu. The operation is

same to Turn on setting.

Turn off 0:00 Status: Everyday

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in AV/S-VIDEO mode

You can connect the set to video tape recorder, VCD, DVD, or

other equipment with AV, S-VIDEO output to watch the program

from them (refer to Connecting video/audio equipment).

SOURCE

VOL

POWER

Firstly, the TV set-must be in AV/S-VIDEO mode (refer

Selecting input signal on page 13).

SOURCE

CH-

VOL-

In AV/S-VIDEO mode, for menu operation please refer to

CH+

VOL+

Operations in TV mode.

In AV/S-VIDEO mode, it is unnecessary to preset channel and

set sound system, so the channel preset menu is inaccessible and

the sound system can not be adjusted.

SOURCE

CH+

VOL-

VOL+

CH-

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations in PC mode

Accessing PC mode/PC signal format/Auto adjusting/Picture adjustment

Accessing PC mode

Press SOURCE button on the

unit or on the remote control

repeatedly until the screen displays

PC, which indicates that the set is in

SOURCE

VOL

POWER

PC mode (refer to page 13).

If you connect the set to PC

equipment, be sure the set is in PC

mode.

SOURCE

CH-

VOL-

CH+

VOL+

In PC mode, if no PC signal is

inputted, the screen will display the

information as illustrated.

PC No Input Signal

PC signal input

Please connect VGA input and be sure that there is VGA

input signal. The signal format should be: 640 x 480 @ 60Hz.

AUTO

CORRECT

Auto adjusting

When PC signal format

SOURCE

changes or when you switch to PC

Adjusting signal

mode by pressing SOURCE button,

the set adjusts frequency and phase

automatically to obtain the best

display. During the process of auto

correction, the screen displays

Adjusting Signal, and all buttons on

the set and on the remote control do

not work until this process is finished.

When the set displays some nonstandard VGA signals and

can not adjust the picture to the best status by itself, you can adjust

it again by pressing the AUTO.CORRECT button on the remote

control.

When the input signal is correct, press MENU button and it

will display PC menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture adjustment

1 ^{Press MENU button to access the}

menu.

Bright

Contrast 100

Saturation80

Sharpness

Color Hue

Backlight

SOURCE

VOL

POWER

Press CH+/- buttons to select the

item.

Bright

CH-

VOL-

Press VOL+/- buttons to adjust the

item.

CH+

VOL+

Item

Function

Remarks

To adjust picture's bright and

contrast in PC mode (does

not affect picture in TV or

AV mode).

Brightness

Adjusting the brightness

Contrast Adjusting the contrast

If VGA input signal is not

standard, you can adjust these

two items until proper picture

position is obtained.

Horizontal Adjusting horizontal position

Vertical

Phase

Adjusting vertical position

Adjusting phase

If the best picture can not be

obtained after many times of

auto correction, you can

adjust these two items to

obtain the best picture.

Adjusting frequency

Adjusting preset

Frequency

Colour

CH+

Colour temperature switch

between User, 9300K,

7300K 6500K & 5000K

VOL-

VOL+

CH-

Temperature colour temperature

You can select Soft, Nature

and Bright.

Backlight Adjusting the backlight

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Before calling service personnel, please check the following chart for a possible cause to the trouble

you are experiencing.

Symptoms

Check the following items

Be sure the power cord is plugged in.

Contrast, colour, tint are not correctly adjusted

Power is not turned on

Poor colour, poor tint

Possible interferences of automobiles, motorcycle,

trolley bus, neon lamps, etc.

Spots appear on the screen

Possible interference of electronic interference

from another TV set, a computer, an electronics

game machine, a broadcast station, etc.

Stripes appear on the screen

Double images or "ghosts"

Snowy picture

This may be caused by reflections from nearby

mountains or buildings.

Check the antenna direction.

It is possible that the aerial "lead-in" is damaged or

comes off.

Check the antenna direction.

The batteries may be worn out.

The batteries may be installed with their polarity

reversed.

Remote controller does

not work

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

~240V, 50Hz

Power Supply:

Power Consumption:

Dimensions (mm):

Weight (kg):

65W

730 x 290 x 560

CRT:

51cm

TV system & channel range

System

VHF

2-12

UHF

CATV

PAL-B/G

21-69

X~Z+2,S1~S41

Colour System:

Sound output:

PAL, NTSC (AV)

2W x 2

Accessories:

Owner's manual x 1

Power cord x 1

VGA cable x 1

Remote control x 1

Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

604-L22A13-00

Download from Www.Somanuals.com. All Manuals Search And Download.

Milan Technology Switch MIL SM801XX User Manual
Moxa Technologies Switch NPort 1220 User Manual
Multiquip Light Therapy Device GBC User Manual
Murray Lawn Mower 385048x51A User Manual
NEC Computer Monitor JC 22W72 User Manual
NETGEAR Home Security System AGM732F User Manual
Nextar Digital Photo Frame N3 506 User Manual
Optimus Karaoke Machine CDG User Manual
Oster Blender 126477 001 000 User Manual
Panasonic DVD Player DVD S54 User Manual