Connect and charge
Set up
Start Here
Stylus
1
2
a. Plug the power adapter into your Zire 72 handheld and into an outlet.
a. (Optional) Unplug the power adapter from
Do not connect the HotSync cable to your handheld until later.
your handheld.
Here’s what you’ll do with
this guide:
• Charge and set up your handheld.
• Install Palm® Desktop software,
software for photos, music, and more.
Important! Already use a
Palm OS® handheld?
Before going on to step 1, synchronize
your current handheld with your
computer so that the information
is up-to-date.
b. Charge for three hours. Be sure to fully charge your handheld before
b. Press the power button.
Power button
going on to the next step
c. Remove the stylus.
d. Follow the instructions onscreen.
• Synchronize your handheld with
your computer.
For more information on upgrading, go
Charging light
USB HotSync® cable
Power adapter
palmOne™ Zire™ 72 handheld
Software installation CD
Problems? See Troubleshooting below.
Install software and connect handheld to computer
Learn More
3
When instructed during installation, connect your handheld to your computer.
To install Palm Desktop software and software for other features like
photos and music, insert the CD into your computer’s CD drive.
Learn the basics
• Start with a tour. If you haven’t done it already, take the Quick Tour
a. Plug the HotSync cable into a USB port on your computer.
on your handheld, and practice Graffiti® 2 writing.
Mac:
Windows:
b. Plug this cable into your handheld.
• Take the interactive tutorial on the CD. Learn how to create an
appointment, set up your handheld’s multimedia features,
synchronize your info, and much more.
Double-click the CD icon, and
then double-click the Palm
Desktop Installer icon.
Follow the installation instructions
that appear on your computer
screen.
Get more detail
USB
• Get more with Getting Started. This guide gives you step-by-step
info, tips, and links to more info on the web. Open Palm Desktop
software on your computer. Then click the Help menu and select
Getting Started.
• Take Getting Started with you. Go to the Additional Software section
on the CD and follow instructions to transfer this guide to your
handheld.
Master your handheld
• Explore the User Guide. This guide has everything from Getting Started,
and more: all the steps, all the details, all the tips. Follow the links in
Getting Started on your computer to the User Guide on the web. Or go
Already use a Palm OS handheld?
Want to synchronize with Microsoft
Outlook? Select “Change your
synchronization method” at the end
of the installation process on the CD.
Expand your know-how
• Visit My Handheld on the palmOne web site. For great tips, software,
• Find answers to questions. If you can’t solve your problem with Getting
Done
Problems? See Troubleshooting below.
Troubleshooting
Synchronization does not begin
Be sure the HotSync cable is connected to your handheld and to a working USB port on
your computer. Follow these steps to check both your computer and your handheld:
Your handheld does not turn on, or does not respond when you tap it
1. Try turning it on by pressing one of the application buttons on the front panel.
Check your handheld:
Make sure your handheld is on, and then try the following:
1. Tap Home
, and then tap HotSync ™ in the application list.
2. In the HotSync application, make sure of the following:
– Local is highlighted. If it isn’t highlighted, tap Local.
Check your computer:
Windows:
1. Make sure the HotSync icon appears in the group of icons in the lower-right part of
your screen.
2. Do a soft reset: Use the stylus to gently press the reset button inside the hole on
the back of the handheld.
3. Make sure the power adapter is firmly connected to the handheld and to a
working electric outlet. Charge for another three full hours.
HotSync icon
– The phrase Cradle/Cable appears. If not,
tap whatever word is there, and then tap
Palm Desktop Installer does not start when you put the CD into the drive
Windows:
1. Click the Start button and select Run.
2. Click Browse to locate the drive with the Palm Desktop software CD.
3. Double-click autorun.exe on the CD.
Mac:
Local
If not:
Cradle/Cable in the pick list.
HotSync icon
a. Click the Start button and select Programs.
b. Select Palm Desktop, and then select HotSync Manager.
2. Check the connection type:
Cradle/Cable
a. Disconnect and then reconnect the HotSync cable.
3. To start synchronization, tap the HotSync icon in the middle of the screen.
1. Double-click the CD icon on the Mac desktop.
2. Double-click the Palm Desktop Installer icon.
b. Make sure there is a checkmark next to Local USB.
If not, click Local USB.
Mac:
Already use a Palm OS handheld?
1. Make sure the HotSync Manager is enabled:
a. Double-click the HotSync Manager icon in the palmOne folder.
b. In the HotSync Controls tab, click Enabled.
2. Make sure the USB connection is working:
a. Disconnect and then reconnect the HotSync cable.
b. Restart your computer.
Did you load any third-party applications on your previous Palm OS handheld?
You’ll have to update them if they are not compatible with your new handheld.
If any of the following symptoms occur on your new handheld after you
synchronize, remove these applications and contact the vendor for updated
versions: handheld freezes or resets when you open an application; slow
performance; unusual screen display; difficulties using handheld features;
uneven sound quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphone jack
Power button
Press to turn
handheld on/off
Stylus
IR (infrared)
port
Expansion
card slot
palmOne, Inc.
Indicator light
400 N. McCarthy Blvd.
Milpitas, CA 95035
Star
Copyright
Voice memo
© 2003 palmOne, Inc. All rights reserved.
When handheld is
on, tap here to
synchronize
palmOne, the palmOne logo, Zire, the Zire logo, and “Z” (Stylized) are among the trademarks or registered trademarks owned by or
exclusively licensed to palmOne, Inc. or its subsidiaries. Palm OS, the Palm logo, Graffiti, HotSync, Palm, the Palm Powered logo, and the
HotSync logo are trademarks owned by or licensed to PalmSource, Inc. All other brand and product names are or may be trademarks of,
and are used to identify products or services of their respective owners.
Find
Home
Tap to go to
Home screen
Disclaimer and Limitation of Liability
palmOne, Inc. assumes no responsibility for any damage or loss resulting from the use of this guide.
Camera
palmOne, Inc. assumes no responsibility for any loss or claims by third parties which may arise through use of this software. palmOne,
Inc. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs.
Be sure to make backup copies of all important data on other media to protect against data loss.
Press to turn on
handheld and
open camera
Menu
IMPORTANT
Please read the End User Software License Agreement with this product before using the accompanying software program(s).
Using any part of the software indicates that you accept the terms of the End User Software License Agreement.
Music
Calendar
Software Download Available
Press to turn on
handheld and open
RealOne Player
Press to turn on
handheld and open
Calendar
Palm® Desktop software is available on CD. Check www.palmOne.com for updates and new versions of the software.
Agency Compliance Information
Product regulatory and compliance information can be found in the User Guide at www.palmOne.com/zire72-userguide.
5-way navigator
Contacts
Press to turn on
handheld and
open Contacts
Mini-USB
connector
Power
connector
PN: 405-6297A-US
Download from Www.Somanuals.com. All Manuals Search And Download.
|