Oricom eco90 Series
DECT Digital Cordless Phone
USER GUIDE
Keep this user guide for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND SAFETY INFORMATION 1
s "ECAUSE THE PHONE WORKS BY SENDING RADIO SIGNALS
IMPORTANT
between base station and handset, wearers of
hearing aids may experience interference in the form
of a humming noise. The telephone is compatible with
most popular hearing aids on the market. However,
due to the wide range of hearing aids available,
there is no guarantee that the telephone will function
"problem free" with every model.
s !VOID EXPOSURE OF THIS TELEPHONE TO MOISTURE OR LIQUIDꢁ
s 4O PREVENT ELECTRIC SHOCKꢄ DO NOT OPEN THE HANDSET OR
base cabinet.
s !VOID METALLIC CONTACT ꢀEꢁGꢁ METAL CLIPSꢄ KEYS BETWEEN
the battery contacts and charging conductors.
s 4HERE IS A SLIGHT CHANCE THAT THE TELEPHONE COULD BE
damaged by an electrical storm. It is recommended
that users unplug the phone from the mains supply
and telephone socket during a storm.
s 9OUR PHONE CAN INTERFERE WITH ELECTRICAL EQUIPMENT
such as answering machines, TV and radio sets,
clock radios and computers if placed too close. It is
recommended that you position the base unit at least
one metre from such appliances.
s 4HIS TELEPHONE COMPLIES WITH APPLICABLE SAFETY
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES ꢀ%-2 ꢁ
The mean power of this telephone does not exceed
ꢂꢃM7 LIMIT AT WHICH POINT TESTING IS REQUIREDꢁ
s $O NOT USE THE HANDSET IN AN EXPLOSIVE HAZARD AREA
such as where there is gas leaking.
s &OLLOW THE LOCAL REGULATIONS REGARDING THE DISPOSAL OF
your packing materials, exhausted batteries and used
phone. Wherever possible, recycle those materials.
s 7E ADVISE THAT THIS PHONE SHOULD NOT BE USED NEAR
INTENSIVE CARE MEDICAL EQUIPMENT OR BY PERSONS WITH
pacemakers. Persons with pacemakers should seek
advice from their doctor before using this product.
s 4HE EARPIECE OF THE HANDSET MAY ATTRACT SMALL METAL
objects such as staples and pins. Care should be
taken when placing the handset near these items.
s 4HIS TELEPHONE IS NOT DESIGNED FOR MAKING EMERGENCY
telephone calls when the mains power fails. Always
have a corded phone available to be able to make
and receive calls to emergency services if the mains
power fails.
s #LEAN WITH A DRYꢄ SOFTꢄ LINTꢅFREE CLOTHꢁ .EVER USE CLEANING
agents, particularly aggressive solvents.
Download from Www.Somanuals.com. All Manuals Search And Download.
2 WARNINGS AND SAFETY INFORMATION
s $O NOT USE YOUR TELEPHONE DURING AN ELECTRICAL STORM
thunderstorm as it is possible to get an electric shock.
2EFER TO INFORMATION CONTAINED IN 7HITE PAGES DIRECTORYꢁ
s 4HIS PHONE IS DESIGNED FOR CONNECTION TO A 034.
telephone line or an analogue extension port of a
PBX system. If you connect this device to a digital
extension of a PBX, damage may result to the PBX.
CAUTION
Use only the mains adaptors supplied with this product.
Incorrect adaptor polarity or voltage can seriously
damage the unit.
Adaptor for base unit:
!
).054ꢆꢇꢃꢃꢅꢂꢈꢃ6 !# ꢉꢃꢊꢋꢃ(Z
/54054ꢆ ꢋ6 $# ꢂꢉꢃM!
Adaptor for charger:
).054ꢆꢇꢃꢃꢅꢂꢈꢃ6 !# ꢉꢃꢊꢋꢃ(Z
/54054ꢆ ꢋ6 $# ꢇꢉꢃM!
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED 3
Installation and Charger
WARNING
1. Connect the mains adaptor (supplied) to the socket on
the back of the base unit and to the wall mains supply.
2. Connect the telephone cord to the phone socket on the
back of the base unit and into the wall phone socket.
$/ ./4 53% 34!.$!2$ꢊ!,+!,).% "!44%2)%3 ).
4()3 02/$5#4ꢄ !3 4(%2% )3 ! 2)3+ /& %80,/3)/.
!.$ꢊ/2 ).*529ꢁ 53% /.,9 .)ꢅ-( 2%#(!2'%!",%
"!44%2)%3 !3 30%#)&)%$ ). 4()3 53%2 '5)$%ꢁ
#/.4!#4 /2)#/- &/2 2%0,!#%-%.4 "!44%2)%3ꢁ
!
ꢌꢁ )NSERT ꢂ RECHARGEABLE .Iꢅ-( !!!
batteries (included), observing the
correct polarity, into the battery
compartment on the handset. Slide
the battery door firmly into place.
4. Place the handset on the charging
cradle and charge the batteries for a full 16 hours before
using it for the first time.
2)3+ /& %80,/3)/. )& "!44%29 )3 2%0,!#%$ "9
!. ).#/22%#4 490%ꢁ
.EVER USE NONꢅRECHARGEABLE BATTERIESꢁ 5SE RECOMMENDED
type supplied with this product.
s
s
.EVER USE ALKALINE OR LITHIUM BATTERIESꢁ
$O NOT DISPOSE OF THE BATTERIES IN A FIREꢄ AS THEY CAN
explode.
s
s
s
s
$O NOT OPEN OR MUTILATE THE BATTERYꢁ 2ELEASED
electrolyte is corrosive and can cause damage to the
eyes or skin. It can be toxic if swallowed.
Note:
!VOID CONTACT WITH METAL OBJECTS WHEN HANDLING THE
battery. These objects could short out the batteries or
cause the conductor to overheat resulting in burns.
It may take some time for the cordless handset to power
up, and it may get warm during initial charge. This is
normal.
$O NOT ATTEMPT TO RECHARGE THE BATTERY CELL BY HEATING
it. Sudden release of battery electrolyte can cause
burns or irritation to the eyes or skin.
/BSERVE THE PROPER POLARITYꢄ OR DIRECTIONꢄ OF ANY BATTERYꢁ
2EVERSE INSERTION OF THE BATTERY CELL CAN RESULT IN
leakage or explosion.
Tip!
It is good practice to put the cordless handset on the
charging cradle when it is not in use to ensure that the
handset is always fully charged.
s
s
2EMOVE THE BATTERIES IF YOU DO NOT PLAN TO USE THE
product for several months at a time.
&OLLOW THE LOCAL REGULATIONS REGARDING THE DISPOSAL OF
your packing materials, exhausted batteries and used
phone. Wherever possible, recycle those materials.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 GETTING STARTED
Pack contents
Purchasing additional handsets
$EPENDING ON THE MODEL YOU HAVE PURCHASED THIS PACK 9OU MAY EXPAND YOUR ECOꢍꢃ BY ADDING MORE HANDSETS
should contain the following items:
(eco9050). These can be purchased directly from Oricom
(Australia). The eco90 can accommodate a total of 6
cordless handsets.
If any of these are missing, please contact Oricom directly.
ECOꢍꢃꢅꢇ
ECOꢍꢃꢅꢂ
Base units
1
1
0
1
1
1
1
2
1
1
1
1
IMPORTANT:
DO YOU HAVE BROADBAND/ADSL?
If you do, you must connect an in line filter (not supplied) between
the telephone socket and your eco90 base to ensure that your
broadband and eco90 will work properly. If you do not install the filter
you will experience interference on the eco90 and your Broadband
may suffer dropouts. Please refer to the user guide of the in line filter
for installation.
Cordless handsets
Charging cradle and power adaptor
Power adaptors
Line cord
User guide
(ANDSET 2ECHARGEABLE !!!
.Iꢅ-( "ATTERIES ꢀꢇꢁꢂ6 ꢈꢉꢃM!H
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES 5
Your cordless handset
2EDIAL ꢊ 5P ꢊ)NCREASE VOLUME KEY
#ALLER )$ꢊ$OWNꢊ $ECREASE VOLUME KEY
-ENU ꢊ /+ KEY
+
–
,%$
#ANCELꢊ 2ECALL KEY
4ALK /Nꢊ/FF KEY
!STERISK ꢊ).4 KEY
(ASH ꢊ+EYPAD LOCK KEY
:EROꢊ0AUSE +EY
-EMORY +EY ꢇ
-EMORY +EY ꢂ
Handsfree
Download from Www.Somanuals.com. All Manuals Search And Download.
6 FEATURES
Your Base unit
LED state
ꢇꢁ ,%$ ON BASE STATION
Aꢁ ,%$ n )NꢅUSEꢄ #OLOR n 'REEN
Pattern
Function
7HEN HANDSET IS OFFꢅHOOK
When there is incoming ring signal
Steady On
Flashes
Bꢁ ,%$ n #HARGINGꢄ #OLOR n 2ED
Pattern
Function
Steady On
Flashes
When handset is in the cradle and charging
When paging, in cadence with ringing signal
ꢂꢁ ,%$ ON (3
,%$ n). 53%
,%$ n#HARGING
Pattern
Function
When message waiting received, or incoming
ring signal.
Flashes
Paging key
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES 7
LCD Display
Icon
Description
Antenna icon
Phone icon
Key lock icon
2ING OFF ICON
Speakerphone icon
Battery level indicator
New call icon
Alarm icon
Download from Www.Somanuals.com. All Manuals Search And Download.
8 BASIC OPERATION
Make a Call
Adjust the Receiver and Speakerphone
Volume
1. Press the [
] or [
] key, wait for a dial tone, then
dial the desired number.
7HILE THE PHONE IS IN TALK MODEꢄ PRESS ; ꢎ = OR ; n = KEY ON
the handset to adjust the receiver or speaker volume of
the handset. The display will show the current volume level
during adjusting.
2. After finishing the conversation, press [
place the cordless handset into the charger.
The talk timer will be shown during talk.
] key or
Note:
Answer a Call
In standby mode press and holding [
seconds, the number associated with the [
] or [
] for 1.5
] or [
]
7HEN THE PHONE RINGSꢄ THE HANDSET ,%$ WILL FLASH AND
THE ,#$ ON THE HANDSET WILL SHOW h2).').'vꢁ )F YOU HAVE
SUBSCRIBED TO #ALLER )$ SERVICE FROM YOUR LOCAL TELEPHONE
company, the incoming call information will be shown.
key will dial out.
Pre-dialling
1. Press the [
] or [
] key to answer a call.
1. When the handset is in standby mode, input the desired
number.
2. After finishing the conversation, press [
] key or
place the cordless handset into the charger cradle.
2. Press [
correct one again. If a pause is needed during dialling,
press and hold [ ] key for a while and character “P”
] key to cancel the wrong digit, input the
Auto Answer
1. If you turn on the “AUTO TALK”, you just need to pick
up the cordless handset from the charger cradle to
will be shown. A 3 seconds pause will be added while
dialling.
answer the call directly, needn’t press [
] or [
]
3. Press the [
] or [
] key, the number will be
key.
automatically dialled out.
2. After finishing the conversation, press [
] key or
4. After finishing the conversation, press [
place the cordless handset into the charger.
] key or
place the cordless handset into the charger cradle.
The talk timer will be shown during talk.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION 9
Dialling from the Phone Book
Paging the Handset
Press [
on the handset will display “PHONEBOOK”, then press the handsets.
] button and the first entry in the phone book
= BUTTON WHEN IN STANDBY MODE AND THE ,#$ If a handset has been misplaced, it is possible to page all
[
Press [
To stop the page call: Press any key on the handset or
press [ ] key again on the base.
] key on the base to station.
appears.
Note:
)F THERE IS NO RECORD IN PHONE BOOKꢄ h%-049v INFORMATION
will display.
Switching the Keypad Lock On/Off
ꢇꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE REQUIRED RECORD FROM
Press and hold [
] key to activate or deactivate the key
the phone book.
lock. The [
] icon turns on or off.
2. Press [
] or [
] key to dial out the number.
Note:
3. After finishing the conversation, press [
] key or
Incoming calls can still be received when key locked.
place the cordless handset into the charger to terminate
the call.
Muting the Microphone
Pressing and holding the [
] key for 1.5s can switch
the microphone on or off during a call. The handset will
DISPLAY h-54%$vꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
10 MULTI-HANDSET OPERATION
3. If you want to transfer the call to the target handset, only
Multi-Handset operation
end the call. The call will be automatically transferred to
the target handset.
9OU CAN USE THESE USEFUL FEATURES IF YOU HAVE ꢂ OR MORE
cordless handsets registered to the base.
Note:
If the handset doesn’t answer within 30 seconds, the
call transfer will be cancelled and the external call
Intercom
will return to the original handset. Press the [
] key to answer the call.
] or
9OU CAN MAKE AN INTERCOM CALL BETWEEN TWO HANDSETSꢁ
[
1. When the handset is in standby mode, press and hold
[
= KEYꢄ THE ,#$ WILL DISPLAY h).4vꢄ AND THEN INPUT THE
Three-way Conversation
desired handset number.
ꢂꢁ 4HE TARGET HANDSET WILL RING AND THE ,#$ WILL SHOW THE
9OU MAY HAVE A ꢌꢅWAY CONVERSATION USING THE INTERCOM AND
an open line.
calling handset number.
3. Press [
answer.
4. Pressing [
] or [
] key in the target handset to
ꢇꢁ $URING EXTERNAL CALLꢄ PRESS AND HOLD ;
] key and input
the desired handset number. The line will put on hold
and the target handset will ring.
] key to disconnect the intercom call.
2. After the target handset answers the call, the intercom
will be made.
Call Transfer
The function allows you to transfer an external call to 3. Press and hold the [
another handset.
] key for 2s on the handset to
INITIATE THE THREEꢅWAY CONFERENCEꢁ
4. By pressing [
= KEYꢄ ANY OF THE HANDSETS CAN QUIT
ꢇꢁ $URING EXTERNAL CALLꢄ PRESS AND HOLD ;
] key and input
from the conference and the other handsets continues
with external call.
the desired handset number. The line will put on hold
and the target handset will ring.
2. After the target handset answers the call, the intercom
will be made.
Download from Www.Somanuals.com. All Manuals Search And Download.
REDIAL OPERATION 11
3. Press [
= KEYꢄ THE h.!-%v WILL BE SHOWN AND INPUT
Redial Function
THE DESIRED NAMEꢁ9OU MUST INPUT A NAMEꢏ OTHERWISE THE
record can’t be saved.
The last 10 numbers you dialed out will be separately
stored in handset redial memory.
4. Press [
] key again, the selected number will be
] key to save.
shown.
5. Press [
Review Redial Record
1. When the handset is in standby mode, press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%$)!,v MENUꢄ THEN
press [ ] key.
].
Delete a Single Redial Record
1. Select a redial record.
2. Press [
= KEY TO ENTER MENUꢄ PRESS ; ꢎ = OR ; n = KEY
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO REVIEW ALL REDIAL RECORDSꢁ
Or
TO SELECT h$%,%4% 2%#/2$vꢁ
3. Press [
4. Press [
= KEYꢄ h#/.&)2-ꢐv WILL BE SHOWNꢁ
] key to confirm.
1. Press [ + ] key to display the information for the redial
records.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO REVIEW ALL REDIAL RECORDSꢁ
Delete All Redial Records
Note:
1. Select a redial record.
)F THE REDIAL RECORD IS EMPTYꢄ h%-049v WILL BE SHOWNꢁ
2. Press [
= KEY TO ENTER MENUꢄ PRESS ; ꢎ = OR ; n = KEY
TO SELECT h$%,%4% !,,vꢁ
3. Press [
4. Press [
= KEYꢄ h#/.&)2-ꢐv WILL BE SHOWNꢁ
] key to confirm.
Save Redial Number
1. Select a redial record.
Note:
2. Press [
= KEY TO ENTER MENUꢄ PRESS ; ꢎ = OR ; n = KEY
$URING REDIAL FUNCTIONꢄ IF YOU WANT TO RETURN TO THE UPPER
layer menu, press [ ] key.
to select “SAVE TO PHONEBOOK”.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 CALLER ID OPERATION
Caller ID Service
Call waiting
The caller’s information will be displayed and recorded if 9OU CAN USE THE RECALL BUTTON TO ANSWER A SECOND CALL WHILE
YOU HAVE SUBSCRIBED TO #ALLER )$ SERVICE FROM YOUR LOCAL you are on the phone. However this service will need to
telephone company.
be turned on. For example to turn on Telstra’s Call Waiting
service:
When the telephone rings, the caller’s information will be
DISPLAYED ON THE HANDSET ,#$ DISPLAYꢁ 4HIS INFORMATION
includes the phone number and name (if supported). The
handset can store up 20 calls for later review (a name of
16 characters and a phone number of 24 digits for each
record). When the memory is full, a new call automatically
replaces the oldest call in the memory.
1. Press [
[ 3 ] [
] to wait for dial tone then Press [
] [ 4 ]
].
ꢂꢁ 9OU WILL HEAR A SERVICE TONE THEN 0RESS ;
].
Take two different calls at the same time
If you have subscribed to your telephone network operators
#ALL 7AITING #ALLER )$ SERVICEꢄ YOUR PHONE WILL DISPLAY THE
number of the second incoming call for around 20 seconds
while you are talking on the phone.
Note:
)F THE CALLERꢑS INFORMATION INCLUDES $ATEꢊ4IMEꢄ THE $ATEꢊ
Time will be stored with the record.
$URING A CALLꢄ YOU WILL HEAR TWO LOUD BEEPS PERIODICALLY TO
notify you of another incoming call. If you wish to answer
this call
If the caller number is the same as one of phonebook
memory, the matched name stored in the phonebook
memory will be displayed.
1. When the handset receives a second call, the number
of the caller appears on the display. It will display for 20
seconds or until you press a key on the phone. Press
The handset will prompt user if there is a missed call. When
the handset is in standby mode, “ ” will be displayed prior
to other display information.
[
] to listen for dial tone then Press [ 2 ] to put the
current call on hold and talk with the second caller.
ꢂꢁ 3UBSEQUENT PRESSES OF ; ] to listen for dial tone
then Press [ 2 ] will toggle you between these 2 callers.
If all the missed calls are reviewed, the display “ ” will
disappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID OPERATION 13
Save Call Log Record
Note:
1. If you reviewed all the missed calls from one handset,
the display “ ” will show on other handsets.
1. Select a call log record.
ꢂꢁ 4HE RECORD COULD BE INSERTED A PREFIX WITH hꢃꢅꢍv DIGITS
2. Press [
] key to toggle the display of the caller
key (use [
digits can’t be deleted) before save to phone book.
3. Press [ = KEY TO ENTER MENUꢄ PRESS ; ꢎ = OR ; n = KEY
to select “SAVE TO PHONEBOOK”, press [
] keys to delete the digits, but the last 6
IDENTITYꢄ NUMBER AND $ATEꢊ4IMEꢁ
Review Call Log Record
] key,
THE ,#$ WILL DISPLAY h.!-%vꢁ
1. When the handset is in standby mode, press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h#!,, ,/'v MENUꢄ THEN
press [ ] key.
].
4. Edit name and Press [
= KEYꢄ THE ,#$ WILL DISPLAY
] key to save.
h.5-"%2vꢄ PRESS ;
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO REVIEW ALL CALL LOG RECORDSꢁ
Or
Delete a Single Call Log Record
1. Select a call log record
ꢇꢁ 0RESS ; n = KEY TO DISPLAY THE INFORMATION FOR THE LAST CALL
2. Press [
KEY TO SELECT h$%,%4% 2%#/2$vꢄ PRESS ;
h#/.&)2-ꢐv WILL BE SHOWNꢁ
= KEY TO ENTER MENUꢄ PRESS ; ꢎ = OR ; n =
received.
] key,
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO REVIEW ALL CALL LOG RECORDSꢁ
3. Press [
] key to confirm.
Note:
1. The “ ” icon will turn on if the call is a missed call.
ꢂꢁ h%-049v WILL BE DISPLAYED ABOUT ꢂꢃ SECONDS AND THEN
return to standby mode if you have not received any
call.
Delete All Call Log Record
1. Select a call log record.
2. Press [
KEY TO SELECT h$%,%4% !,,vꢄ PRESS ;
h#/.&)2-ꢐv WILL BE SHOWNꢁ
3. Press [ ] key to confirm.
= KEY TO ENTER MENUꢄ PRESS ; ꢎ = OR ; n =
3. User can press [
time.
] key to review the incoming call
] key,
Download from Www.Somanuals.com. All Manuals Search And Download.
14 CALLER ID OPERATION
Dial back from a Call Log Record
1. Select a call log record
ꢂꢁ 4HE RECORD COULD BE EDITED A PRElX WITH hꢃꢅꢍv DIGITS KEYS
(use [
] keys to delete the digits, but the last 6 digits
can’t be deleted) before dial out.
3. Press [ ] or [ ] key, the number is dialed out
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONE BOOK 15
The telephone can store up to 25 entries in the phone book Key assignment overview
with name and call number. When the function is supported
by the telephone provider service and the caller, the
handset displays the name of the caller (when stored in the
phone book).
Key
1
Capital letter
<space> 1
A B C 2
2
Store Entries
3
$ % & ꢌ
1. Press [
2. Press [
] key to access phone book memory.
= KEYꢄ THE ,#$ ON THE HANDSET WILL DISPLAY
4
' ( ) ꢈ
5
* + , ꢉ
the stored number.
6
- . / ꢋ
0 1 2 3 ꢒ
T U V 8
3. Press [
= KEYꢄ THE ,#$ ON THE HANDSET WILL DISPLAY
h!$$ .%7 %.429vꢄ THEN PRESS ;
4. Enter name (maximum 16 characters) and press
] key, enter number and press [ ] key when
] key,
7
8
[
finished.
9
7 8 9 : ꢍ
0
Note:
0
ꢇꢁ 7HEN THE CAPACITY IS FULLꢄ h-%-/29 &5,,v WILL DISPLAYꢁ
2. Any incorrect input can be deleted by pressing [
key.
*
ꢅ ꢄ ꢁ ꢐ ꢓ ꢔ ꢕ
: “ $ £ ¥ #
]
#
Download from Www.Somanuals.com. All Manuals Search And Download.
16 PHONE BOOK
Edit Entries
Delete Entries
Press [
] key to access phone book memory.
Press [
] key to access phone book memory.
1. Press [
Press [
= KEY AND PRESS ; ꢎ = OR ; n = KEY TO SCROLLꢄ 1. Press [
] key to select a desired entry, and then Press [
= KEY AND PRESS ; ꢎ = OR ; n = KEY TO SCROLLꢄ
] key to select a desired entry, and then
PRESS ; ꢎ = OR ; n = TO SELECT THE SUBMENU h%$)4vꢁ
2. Press [ = TO START .!-% EDITION AND PRESS ;
KEY AGAIN TO START .5-"%2 EDITIONꢁ
PRESS ; ꢎ = OR ; n = TO SELECT THE SUBMENU h$%,%4%
2%#/2$vꢁ
]
2. Press [
3. Press [
= KEYꢄ h#/.&)2-ꢐv WILL BE SHOWN
] key again to confirm.
3. Press [
] key to confirm.
Note:
Press [
Delete All Entries
] key to delete any incorrect input.
Press [
] key to access phone book memory.
Edit [
] or [
]
1. Press [
Press [
= KEY AND PRESS ; ꢎ = OR ; n = KEY TO SCROLLꢄ
] key to select a desired entry, and then
!T THE PREꢅDIAL SCREEN OR ANY OF THE MAIN MENU PHONEBOOKꢄ
call log or redial review screens, pressing and holding the
PRESS ; ꢎ = OR ; n = TO SELECT THE SUBMENU h$%,%4% !,,vꢁ
2. Press [
3. Press [
= KEYꢄ h#/.&)2-ꢐv WILL BE SHOWNꢁ
] key again to confirm.
[
] or [
] keys for 1.5 seconds will store the shown
number.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION 17
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2).'%2 -%,/$9v AND
press [ ] key.
] key.
Alarms
9OU CAN SET TWO ALARMS ON THE HANDSETꢁ
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h!,!2-3v AND PRESS
] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h!,!2- ꢇv OR h!,!2- ꢂv
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h#,%!2v OR h3%4vꢁ
] key.
[
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h%84%2.!, #!,,
-%,/$9v OR h).4%2.!, #!,, -%,/$9v AND PRESS
[
] key.
ꢉꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE DESIRED RING MELODYꢄ
the selected melody will sound.
ꢉꢁ )F YOU SELECT h#,%!2v AND PRESS ;
] key, the alarm
6. Press [
] key to confirm the setting.
will be cleared. If you select “SET” and press [
ENTER ((ꢆ-- IN ꢂꢈꢅHOUR FORMAT OR IN ꢇꢂꢅHOUR FORMATꢁ
] ,
Ring Volume
6. Press [
] key to confirm.
9OU MAY SELECT VOLUME hꢇꢅꢉv OR h/&&v FOR RING TONEꢁ 4HE
Note:
default setting is volume 3.
7HEN !LARM TIME IS REACHEDꢄ h!,!2- ꢇv OR h!,!2- ꢂv
and time will display and alarm sound will stop after around
1 minute. The Alarm establishes prompt ring everyday.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 2).'%2 6/,5-%v
and press [ ] key.
] key.
Handset Settings
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE DESIRED RING VOLUMEꢄ
Ring Melody
the selected volume will sound.
5. Press [
] key to confirm the setting.
9OU MAY SELECT ONE OF THE ꢇꢃ AVAILABLE RINGER TONES FOR
your incoming calls alert tone. The default setting is “01” for
external call and “02” for internal call.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 MENU OPERATION
Date / Time format
Set Date
9OU CAN SET THE $ATEꢊ4IME FORMAT DISPLAYEDꢁ
1. Press [ ] key.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3vꢁ
3. Press [
h$!4%ꢊ4)-% 3%44).'3vꢁ
4. Press [
h$!4%ꢊ4)-% &/2-!4vꢁ
5. Press [ = KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT 5. Press [
9OU CAN SET THE $ATEꢊ4IME DISPLAYEDꢁ
1. Press [
] key.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3vꢁ
= KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT 3. Press [
= KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT
h$!4%ꢊ4)-% 3%44).'3vꢁ
= KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT 4. Press [
= KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT
= KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT
] key.
h$!4%ꢊ4)-%vꢁ
h$!4%v OR h4)-%vꢁ
h$!4%vꢁ
6. Press [
= KEYꢄ AND PRESS ; ꢎ = OR ; n = KEY TO SELECT 6. Press [
THE DESIRED $ATEꢊ4IME FORMAT
ꢒꢁ )NPUT THE CORRECT LAST TWO DIGITS OF YEAR ꢀRANGEꢆ ꢃꢃꢅꢍꢍ
7. Press [
] key to confirm.
using the keypad, press [
setting.
ꢖꢁ )NPUT THE CORRECT MONTH AND DATEꢄ THE FORMAT ISꢆ DATE ꢊ
MONTH ꢀDATE RANGEꢆ ꢃꢇꢅꢌꢃꢊꢌꢇꢄ MONTH RANGEꢆ ꢃꢇꢅꢇꢂ USING
] key to confirm the
Note:
4HERE ARE TWO CHOICES FOR DATE FORMAT ꢀ$$ꢊ-- OR --ꢊ$$
AND TWO CHOICES FOR TIME FORMAT ꢀꢇꢂ (2 OR ꢂꢈ (2
numeric keys, press [
] key to confirm the setting.
9. Press [ ] key to confirm the setting.
Note:
If the input value is over the range, the handset will beep
and will not store the input value. Please input the correct
setting again.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION 19
Set Time
Earpiece Boost Mode
1. Press [
] key.
It is possible to select different options with boost mode
and be able to adjust the level during a call.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ = KEYꢄ PRESS ; ꢎ = OR ; n = KEY TO SELECT h$!4%ꢊ
4)-% 3%44).'3v PRESS ; ] key, then press [ + ] or
; n = KEY TO SELECT h$!4%ꢊ4)-%v PRESS ;
; ꢎ = OR ; n = KEY TO SELECT h4)-%v PRESS ;
ꢌꢁ )NPUT THE CORRECT TIME USING THE KEYPADꢄ THE ꢇꢂ(2
FORMAT ISꢆ HOURꢊMINUTE ꢀHOUR RANGEꢆ ꢃꢇꢅꢇꢂꢄ MINUTE RANGEꢆ
ꢃꢃꢅꢉꢍ ꢄ THE ꢂꢈ(2 FORMAT ISꢆ HOURꢊMINUTE ꢀHOUR RANGEꢆ
ꢃꢃꢅꢂꢌꢄ MINUTE RANGEꢆ ꢃꢃꢅꢉꢍ ꢁ
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"//34 -/$%v AND
press [ ] key.
] key.
] key, press
] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE DESIRED OPTION ꢀSEE
table below for options).
5. Press [
] key to confirm the setting.
4. Press [
] key to confirm the setting.
Option
Description
Note:
If the input value is over the range, the handset will beep
and will not store the input value. Please input the correct
setting again.
Off
No boost mode access
$URING A CALLꢄ PRESS ; ꢎ = KEY TO ACCESS UP TO
the lowest boost level with receiver.
/.ꢅ,/7
$URING A CALLꢄ PRESS ; ꢎ = KEY TO ACCESS UP TO
the medium boost level with receiver.
/.ꢅ-%$)5-
/.ꢅ()'(
$URING A CALLꢄ PRESS ; ꢎ = KEY TO ACCESS UP TO
the highest boost level with receiver.
$URING A CALLꢄ ꢀPRESS AND HOLD ; ꢎ = KEY TO
access up to the highest boost level with
receiver.
AUTO
However, the handset will restore to normal
volume after you end the call.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 MENU OPERATION
Key Tone
Handset Name
9OU MAY SET THE KEY TONE TO h/.v OR h/&&v WHEN YOU PRESS 9OU CAN SET THE CORDLESS HANDSET NAME THAT YOU LIKEꢁ
the keypad. The default setting is “ON”.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(!.$3%4 .!-%v AND
press [ ] key.
4. Input the desired name using the keypad.
5. Press [ ] key to confirm the setting.
] key.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h+%9 4/.%v AND PRESS
] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h/.v OR h/&&vꢁ
5. Press [ ] key to confirm the setting.
] key.
[
Backlight Setting
Display Contrast
9OUR CORDLESS HANDSET HAS DIFFERENT BACKLIGHT TIMEꢁ
9OUR CORDLESS HANDSET HAS DIFFERENT DISPLAY CONTRASTꢁ
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"!#+,)'(4 3%44).'v
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT BACKLIGHT TIMEꢁ
5. Press [ ] key to confirm the setting.
] key.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h$)30,!9 #/.42!34v
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT CONTRASTꢁ
5. Press [ ] key to confirm the setting.
] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION 21
Auto Talk
Set Default
This option allows user to pick up the cordless handset This option allows user to restore the cordless handset to
from the charger to answer an incoming call without the factory default settings.
pressing [
] or [
] key. The default setting is “OFF”.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h3%4 $%&!5,4v AND
] key.
1. Press [
] key.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h!54/ 4!,+v AND PRESS
] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h/.v OR h/&&vꢁ
press [
= KEYꢄ THE ,#$ WILL DISPLAY h#/.&)2-ꢐvꢁ
[
4. Press [
] key to confirm the setting.
Base Settings
5. Press [
] key to confirm the setting.
Base Ringer Melody
Language
9OU MAY SELECT ONE OF THE ꢉ AVAILABLE RING TONES FOR YOUR
incoming calls.
9OU CAN SET DIFFERENT DISPLAY LANGUAGESꢁ
1. Press [ ] key.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h(3 3%44).'3v AND
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"3 3%44).'3v AND
press [ ] key.
3. “INPUT PIN” will be shown, Input the correct PIN code
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"!3% 2).'%2
-%,/$9v AND PRESS ; ] key.
] key.
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h,!.'5!'%v AND PRESS
] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT LANGUAGEꢁ
5. Press [ ] key to confirm the setting.
[
ꢉꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE DESIRED RING TONEꢄ THE
selected music will sound.
6. Press [
] key to confirm the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 MENU OPERATION
Base Ringer Volume
Change PIN
9OU MAY SELECT ONE OF THE ꢉ AVAILABLE VOLUMES FOR YOUR PIN is your base’s identification number, the default setting
incoming call alert tone. The default setting is volume 3.
1. Press [ ] key.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"3 3%44).'3v AND
press [ ] key.
3. “INPUT PIN” will be shown, Input the correct PIN code
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"!3% 2).'%2
6/,5-%v AND PRESS ; ] key.
IS hꢃꢃꢃꢃvꢁ 9OU MAY CHANGE THE 0).ꢁ 0LEASE TAKE NOTE OF THE
change.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"3 3%44).'3v AND
press [ ] key.
3. “INPUT PIN” will be shown, input the correct PIN code
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h#(!.'% 0).v AND PRESS
= KEYꢄ THE ,#$ WILL SHOW h.%7 0).vꢁ
5. Press number key to input the new PIN code and press
= KEYꢄ THE ,#$ WILL SHOW h#/.&)2- 0).vꢄ PROMPT
] key.
[
ꢉꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE DESIRED RING VOLUMEꢄ
the selected volume will be sounded.
[
6 Press [
] key to confirm the setting.
you to input the new PIN code again.
6. Input the new PIN code again and press [
confirm the setting.
] key to
Note:
1. The PIN code must be 4 digits.
2. If the new PIN code that you input two times is different,
the change will fail, the display will return to step 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION 23
3. “INPUT PIN” will be shown, Input the correct PIN code
Recall (Flash) Time
and press [
] key.
9OU MAY NEED TO CHANGE THE mASH TIME ꢀSHORTꢊMEDIUMꢊLONG
if you use this on a PBX system in a office. The default is
short.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h6-7)v AND PRESS ;
KEYꢁ h6-7) /&&ꢐv WILL DISPLAYꢁ
]
5. Press [
] key to confirm the setting.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"3 3%44).'3v AND
press [ ] key.
3. “INPUT PIN” will be shown, Input the correct PIN code
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h&,!3( 4)-%v AND PRESS
] key.
ꢉꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE DESIRED mASH TIMEꢁ
] key.
Note:
6-7) SERVICE REQUIRES A SUBSCRIPTION THROUGH YOUR LOCAL
service provider.
Set Default
[
This option allows user to restore the base to the default
setting.
6. Press [
] key to confirm the setting.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"3 3%44).'3 v AND
press [ ] key.
3. “INPUT PIN” will be shown, Input the correct PIN code
and press [ ] key.
ꢈꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h3%4 $%&!5,4v AND
] key.
VMWI
If you have subscribed to a voice messaging service, the
,#$ WILL DISPLAY h-%33!'% 7!)4).'v AND FLASH TO ALERT
you that you have received new message.
4O TURN 6ISUAL -ESSAGE 7AITING )NDICATION ꢀ6-7) OFF
press [
= KEYꢄ THE ,#$ WILL DISPLAY h#/.&)2-ꢐvꢁ
5. Press [
] key to confirm the setting.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h"3 3%44).'3v AND
press [ ] key.
] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 REGISTRATION
Register
Note:
1. If the handset is registered to the base. Cordless
handset number will be shown after it returns to
standby mode.
2. If the cordless handset fails to register to the base,
register the handset again.
2EGISTERING YOUR HANDSET
2EGISTRATION ALLOWS COMMUNICATION BETWEEN YOUR BASE UNIT
and handset(s). If your handset is not registered, you will
not be able to make a call or use some of the functions and
features on the phone.
3. Up to 6 cordless handsets can be registered to one
base.
The handsets in this pack do not need registering. If your
HANDSET DISPLAYS h3%!2#().'vꢄ FOLLOW THE STEPS BELOW TO
register your handset.
Select Base
Handset
This option allows user to select a base.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%')342!4)/.v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%')34%2v AND PRESS
] key,
] key.
1. Press [
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%')342!4)/.v AND
press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h3%,%#4 "!3%v AND
] key.
[
press [
= KEYꢄ 0RESS ; ꢎ = OR ; n = KEY TO SELECT A
specific base.
ꢈꢁ 4HE ,#$ WILL DISPLAY h).054 0).vꢁ
4. Press [
] key to comfirm the setting.
5. Input the correct PIN code and press [
] key to
BEGIN TO REGISTER THE CORDLESS HANDSETꢄ THE ,#$ WILL BLINK
h2EGISTRATIONvꢁ
Press and hold the [
] key for about 15 seconds until
LONG BEEP SOUND AND INꢅUSE ,%$ mASHESꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
REGISTRATION 25
Remove Handset
Remove Base
This option allows user to remove a registered cordless This option allows user to remove the registered cordless
handset from the base. handset from the base.
1. Press [ ] key. 1. Press [ ] key.
ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%')342!4)/.v AND ꢂꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%')342!4)/.v AND
press [ ] key. press [ ] key.
ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%-/6% (!.$3%4v ꢌꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT h2%-/6% "!3%v AND
and press [ ] key. press [ ] key,
4. Input the PIN code and press [ 4. Input the correct PIN code and press [
ꢉꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE CORDLESS HANDSET YOU ꢉꢁ 0RESS ; ꢎ = OR ; n = KEY TO SELECT THE BASE YOU WANT TO
] key.
] key.
] key.
want to remove and press [
remove and press [
“INPUT PIN”.
6. Input the correct PIN code and press [
7. Press [ ] key to confirm.
= KEYꢁ 4HE ,#$ WILL DISPLAY
Note:
] key.
4HE ,#$ OF THE REMOVED HANDSET WILL SHOW h3%!2#().'vꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
26 TECHNICAL SPECIFICATIONS
Approx. 10 hours talk time
Handset Operating Time: (average values*)
Approx. 100 hours standby
-/$%, ./ꢁꢆ33!ꢅꢉ7ꢅꢃꢉ !5 ꢃꢋꢃꢃꢂꢉ&
!# ꢊ $# !DAPTER ꢀ&OR "ASE
).054ꢆꢇꢃꢃꢅꢂꢈꢃ6 !# ꢉꢃꢊꢋꢃ(Z
/54054ꢆ ꢋ6 $# ꢂꢉꢃM!
-/$%, ./ꢁꢆ33!ꢅꢉ7ꢅꢃꢉ !5 ꢃꢋꢃꢃꢇꢉ&
).054ꢆꢇꢃꢃꢅꢂꢈꢃ6 !# ꢉꢃꢊꢋꢃ(Z
/54054ꢆ ꢋ6 $# ꢇꢉꢃM!
!# ꢊ $# !DAPTER ꢀ&OR (ANDSET CHARGERꢄ
twin pack only)
2ECHARGEABLE
Battery
'0ꢈꢉ!!!(#ꢄ ꢇꢁꢂ6 ꢊ ꢈꢉꢃM!H ꢊ .Iꢅ-(ꢄ !!! X ꢂ
* For guidance only, depends on initial battery charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE 27
Troubleshooting
Problem
Possible cause(s)
Solution(s)
No dial tone on the
cordless handset.
1. The base unit is not properly connected.
2. Too far from the base unit.
3. Battery charge is low.
1. Check CONNECTION to power and telephone line.
ꢂꢁ -OVE HANDSET #,/3%2 TO BASE UNITꢁ
ꢌꢁ #(!2'% BATTERYꢁ
4. Incorrect battery polarity.
ꢉꢁ 2EꢅREGISTER HANDSETꢁ
ꢈꢁ 2%ꢅ).3%24 BATTERIES AND CHECK ꢎ AND .
5. Handset not registered.
!NTENNA SYMBOL IS mASHINGꢁ 1. The handset is not registered. If the handset is
ꢇꢁ 2%')34%2 THE HANDSETꢁ
UNREGISTEREDꢄ IT DISPLAYS 3%!2#().'ꢁ
2. The handset is out of range.
ꢂꢁ -OVE #,/3%2 TO THE BASE UNITꢁ
3. Check power CONNECTION to the base.
3. The product is not properly connected.
No beep when the cordless 1. The handset is not placed properly on the charger. ꢇꢁ ,IFT HANDSET OFF THE CHARGER CAREFULLY AND 2%0/3)4)/.
handset is placed on the
charger.
correctly.
2. Charging contacts are dirty.
3. No power connection to base unit.
4. The handset’s power is turned off.
2. CLEAN charging contacts with a clean and dry cloth.
3. Check power CONNECTION to the base.
4. CHECK batteries.
Handset charged for 24
hours but Battery icon
remains empty.
1. Handset battery is defective or faulty.
2. Handset is not placed properly on the charger.
3. Battery installed incorrectly.
ꢇꢁ 2%0,!#% WITH NEW !!! RECHARGEABLE .Iꢅ-( BATTERIESꢁ
2. CHECK to make sure the battery icon is scrolling.
ꢌꢁ 2%ꢅ).3%24 BATTERIES AND CHECK ꢎ AND .
4. The product is not properly connected.
4.Check power CONNECTION to the base.
No symbol on the display.
Can’t transfer a call.
1. Battery is empty.
2. The product is not properly connected.
ꢇꢁ #(!2'% BATTERYꢁ
ꢂꢁ -AKE SURE YOUR PRODUCT IS PROPERLY 0,5''%$ꢅ).ꢁ
1. Handset is busy.
2. Handset is out of range.
3. Wrong handset number.
ꢇꢁ #HECK !,, HANDSETS AND %.$ ALL CALLSꢁ
ꢂꢁ -OVE HANDSET #,/3%2 TO BASE UNITꢁ
ꢌꢁ #HECK (!.$3%4 .5-"%2ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
28 TROUBLESHOOTING GUIDE
Problem
Possible cause(s)
Solution(s)
"AD AUDIO QUALITY
(crackles,echo, etc.).
1. Interference from nearby electrical appliance.
2. Base unit is installed in a room with thick walls.
3. The handset is too far from the base unit.
ꢈꢁ )F YOU HAVE "ROADBANDꢊ!$3, YOU NEED A IN LINE
filter (not supplied).
1. Try a different connection point, one that is away from other
electrical appliances.
ꢂꢁ )NSTALL THE BASE UNIT IN A $)&&%2%.4 ROOM /2 USE
EXTENSION leads.
ꢌꢁ -OVE #,/3%2 TO THE BASE UNITꢁ
ꢈꢁ %NSURE A INꢅLINE !$3, lLTER IS INSTALLED ON ALL PHONE SOCKETS
between wall plate and your phone.
#ALLER )$ DOES NOT WORKꢁ
Service not activated.
1. The ringer is off.
2. Too many phones are sharing the same phone
line.
#HECK YOUR 35"3#2)04)/. WITH THE 3%26)#% PROVIDERꢁ
Phone does not ring when
a call comes in.
1. Turn ON the ringer.
ꢂꢁ $ISCONNECT SOME OF THE PHONES FROM THE PHONE LINEꢁ
3. Check base unit CONNECTIONS.
3. Base unit not plugged in.
Keypad does not work.
Keypad may be locked.
UNLOCK the keypad.
Busy tone + in use light on. 1. Other handset may still be connected.
2. Check power supply connection.
ꢇꢁ #HECK !,, HANDSETS AND %.$ ALL CALLSꢁ
2. Check CONNECTIONS to wall and base.
Handset registration fails
continuously.
The base memory may be full.
$ELETE UNꢅUSED HANDSET AND TRY AGAINꢁ
#ANNOT MAKEꢊANSWER A ꢂND 2nd call service can be activated.
call
Check with your service provider. Check the recall selection is
correct.
Note:
If none of the above solutions help, reset your phone by disconnecting the mains power from the base and removing batteries
FROM HANDSETꢊSꢁ 2ECONNECT AFTER ꢇꢉ MINUTESꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX 29
Warranty Information (Australia)
(i) failure by you to follow the instructions in the User
'UIDE FOR THE INSTALLATION AND PROPER FUNCTIONING OF
THE PRODUCTꢏ
(a) Warranty
Oricom warrants that the product is free from defects in
materials and workmanship for a period of 12 months
effective from the date of purchase. This warranty in
no way affects your statutory warranty under the Trade
Practices Act 1974 or any other similar legislation. It is
important that you read the Warranty Card as it contains
full and additional details of the warranty, limitation
of warranty and conditions for receiving the warranty
services during the warranty period. The Warranty
Card is located in the package. If you cannot locate the
Warranty Card, please contact our Customer Support
Service on 1300 889 785.
(ii) negligence on your part or misuse by you of the
PRODUCTꢏ
ꢀIII ANY UNꢅCONTROLLED EXTERNAL CAUSE TO THE PHONE NOT
functioning including but not limited to electricity
FAILUREꢄ LIGHTINGꢄ OVER VOLTAGEꢏ
(iv) non adherence by you to the warnings in the User
'UIDE AND THE 5SER 'UIDE GENERALLYꢏ
(v) modification to the product or services carried out
to the product by anyone other than Oricom or on
Oricom’s behalf.
(b)Exclusion and limitation of liability.
/RICOM WILL NOT BE LIABLE FOR CONSEQUENTIAL LOSSES INCLUDING
loss of profits arising from a cause of action in contract, tort
or any other statutory or common law (except where a statute
or any law prohibits this exclusion). The warranty does not
extend to damage caused by misuse, negligence, excessive
voltage, faults on the telephone line or lightning. This warranty
in no way affects your statutory rights. Full details of the
warranty are contained in the enclosed warranty card.
Oricom will not be in breach of a warranty or condition
EXPRESSLY STATED IN THIS 5SER 'UIDE OR THE 7ARRANTY
Card or implied by the Trade Practices Act and excludes
any liability arising under any statutory or common law
for damages or any other remedy if the damage occurs
as a result of:
Download from Www.Somanuals.com. All Manuals Search And Download.
Australia
Customer Support
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756
Email: [email protected]
Phone: 1300 889 785
Fax: (02) 4574 8898
Download from Www.Somanuals.com. All Manuals Search And Download.
|