TM
Baby Monitor
Secure 700
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION 1
The installation location plays a decisive role in ensuring
proper operation. Therefore, maintain a distance of at
1 Safety Information
least one meter from other electronic equipment, such as
microwave ovens or hi−fi devices, otherwise they could
cause mutual interference/faults.
Please read this operating instruction manual thoroughly.
Intended use
Prevent excessive exposure to smoke, dust, vibration,
chemicals, moisture, heat and direct sunlight. Do not use
the equipment in potentially explosive areas.
The surveillance system has been developed to monitor
rooms. The baby unit sends acoustic and video signals
from its point of installation to the parent unit. Any other
use is considered unintended use.
Power adapter plug
The use of this equipment does not substitute personal
supervision, e.g. of a child. Users are not relieved of their
personal liability. Unauthorised modification or reconstruction
is not permitted. Under no circumstances open the device or
complete any repair work yourself.
ATTENTION
Only use the power adapter plugs supplied since other
power adapter plugs could damage the surveillance
system. Ensure access to the power adapter plug is not
obstructed by furniture or such.
!
Installation location and safety information
Never lay the baby unit in a baby’s/child’s bed or playpen.
Ensure that the baby unit and power cable are out of reach
of babies/children, i.e. they are at least one meter away.
Pay attention that the components are sufficiently well−
ventilated when in operation. Do not lay a cushion, towel or
such over the devices.
The devices are not intended for medical purposes.
Warning and signal tones from respiratory or heartbeat
monitoring equipment are not transmitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
2 SAFETY INFORMATION
devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in
normal domestic waste!
Rechargeable batteries
ATTENTION
Batteries represent a hazard to health and
the environment! Never open, damage or
swallow batteries or allow them to pollute the
environment.
Never throw batteries into a fire. Only use batteries of the
same type! Pay attention to correct polarity.
!
Power failure
They may contain toxic, ecologically hazardous heavy
metals.
In the event of a power failure, the devices only operate
through battery power.
You are legally obliged to dispose of power packs and
batteries at the point of sale or in the corresponding
containers provided at collection points provided by local
public waste authorities. Disposal is free of charge. The
adjacent symbols indicate that the batteries must not
be disposed of in normal domestic waste and must be
brought to collection points provided by local public waste
authorities.
Disconnect the power adapter plugs from the devices in
this case.
Medical equipment
ATTENTION
Never use the devices in the vicinity of medical
equipment. Effects on such equipment cannot be fully
ruled out.
!
Packaging materials must be disposed of according to
local regulations.
Disposal
In order to dispose of your device, take it to a
collection point provided by your local public waste
authorities (e.g. recycling centre). According to laws
on the disposal of electronic and electrical devices, owners
are obliged to dispose of old electronic and electrical
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOuR SC700 3
1
2
3
4
Antenna
2 Getting to know your SC700
Sound level LEDs
Play / Pause
Lullaby selector
Talk button
The buttons in this operating manual are subsequently
depicted with a uniform contour. Therefore, slight
deviations in the appearance of the symbols on the buttons
compared to those depicted here are possible.
5
6
7
Menu button
VOX LED
Monitor unit (Parent Unit)
8
9
10
11
12
Loudspeaker
Microphone
Power LED
On/Off switch
Reduce volume and brightness / menu options
selection
1
2
3
13
12
13
12
11
3
4
14
4
5
13
Increase volume and brightness / menu options
selection
6
7
10
9
14
15
16
17
Belt clip/Support
Battery compartment
Charger
15
8
17
Charge contacts
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4 GETTING TO KNOW YOuR SC700
18
19
20
21
22
23
24
25
26
27
28
Night light
Light sensor
Power LED
Microphone
Lens
Antenna
Loudspeaker
Temperature sensor
Socket for power adapter plug
ON/OFF switch
Battery compartment
Camera unit (baby Unit)
18
23
19
24
22
21
27
20
25
26
28
26
Download from Www.Somanuals.com. All Manuals Search And Download.
uSING YOuR SC700 5
Operating with batteries (not supplied)
3 Installation
Use a small screwdriver to open the baby
Insert the batteries, paying attention to
correct polarity. Refer to the diagrams in
the battery compartment. Close the battery
compartment again.
Safety information
ATTENTION
It is essential to read the Safety Information in Chapter 1
before using your SC700.
!
The baby unit is operated by means of 4 AAA Alkaline batteries
(not contained in the material supplied). The baby the power
adapter plug.
Checking the package contents
In the case of a low battery charge, the Power LED flashes
slowly. The batteries must be replaced,
The package contains:
One monitor unit One rechargeable
Operating with a power adapter plug
One camera unit
baby unit
(parent unit) with
belt clip/support
battery for the
parent unit
Connect the baby unit as illustrated in the diagram. For
safety reasons, only use the power adapter plug supplied.
One power
One charger with
adapter plug for power adapter plug
The baby unit for the parent unit
An operating
manual
Connecting and aligning the baby unit
ATTENTION
Position the baby unit with a minimum distance of 1 m
!
to other electronic devices, otherwise there is a risk of
mutual disturbance. Point the upper section of the baby
unit towards the baby or object you want to monitor.
Check that the baby or object is suitably displayed on the
parent unit.
Mains power outlet
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connecting the parent unit
The parent unit is powered by a 3.6 V, 930 mAh battery pack.
The rechargeable battery pack can be recharged directly in
the parent unit when it is inserted in the charging station. The
Power LED lights up red when the parent unit is being charged.
In the case of a low battery charge, the Power LED flashes
slowly. The battery pack must then be recharged.
ATTENTION
Position the parent with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk.
!
Using the belt clip/support
Operating with a power adapter plug
You can use the belt clip/support as a belt clip by turning it
upwards.
Connect the parent unit as illustrated in the diagram. For
safety reasons, only use the power adapter plug supplied.
When tuned downwards, it can be used as a support to
keep it in a standing position.
Important Note
Mains power outlet
Operation with rechargeable batteries
Before using your SC700 for the first time, please charge
the batteries in the parent unit for a minimum of 14 hours.
This will help to increase the performance of your battery.
6. Turn the belt clip upwards.
7. Open the battery compartment on the rear side of the
parent unit.
8. Insert the batteries, paying attention to correct polarity.
9. Close the battery compartment again.
10.Turn the belt clip back downwards.
Download from Www.Somanuals.com. All Manuals Search And Download.
OpERATING ThE BABY uNIT 7
Connecting and aligning the baby unit
ATTENTION
4 Operating the baby Unit
Check the baby unit and parent unit are working properly each
time before the equipment is put into operation.
Position the baby unit with a minimum distance of 1 m
to other electronic devices, otherwise there is a risk of
mutual disturbance. Point the upper section of the baby
unit towards the baby or object you want to monitor.
Check that the baby or object is suitably displayed on the
parent unit.
!
Switching the baby unit on/off
Position the baby unit in a good position for the monitoring
tasks required and align the camera lens to the area to be
monitored.
Night vision
Slide the switch to ON.
The baby unit is equipped with 8 infrared diodes. This
enables the transmission of pictures from areas which
are not illuminated. The night vision function is activated
automatically when the light conditions make it necessary.
The Power LED lights up green. The baby unit is
now ready to operate.
To switch the unit off, slide the switch to OFF.
In the case of a low battery voltage, the Power LED flashes
slowly.
When the night−time vision function is activated, the screen
In this event replace the 4 x AAA batteries with fresh alkaline
batteries.
display on the parent unit turns to black and white.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 OpERATING ThE pARENT uNIT
Press this button twice.
5 Operating the Parent Unit
This icon appears in the display for a few seconds.
Use the button to set temperature measurement to
OFF, °C or °F.
Check the baby unit and parent unit are working properly each
time before the equipment is put into operation.
18°C The current temperature is displayed during the
temperature measurement, e.g. in °C.
Switching the parent unit on/off
Press and hold this button until you hear 2 acoustic
signals. The logo appears first then the image being
taken by the baby unit camera.
Press and hold the button for approx. 1 second to
switch the unit off.
Switching this night light on/off
Press the button three times.
This icon appears in the display for a few seconds.
Use this button to switch the night light on the baby
unit on or off.
In the case of a low battery charge, the Power LED flashes
slowly.
Operating the Parent unit
Adjusting the VOX1 sensitivity
The VOX1 function (sound detection) causes the
system to start transmitting automatically from the
baby unit to the parent unit immediately a voice or
sound is detected.
Setting the brightness
Press the button once.
This icon appears in the display for a few seconds.
Use this button to adjust the brightness to one of five
settings.
Press this button four times.
This icon appears in the display for a few seconds.
Adjusting the temperature measurement
IMPORTANT INFORMATION
Use this button to set VOX to OFF or adjust the
sensitivity to one of 5 levels. When one of the five
levels has been set, the VOX LED lights up red and
the display goes out after 10 seconds.
The ideal temperature for a baby to sleep is 16° - 18 °C. Please
set or adjust the room temperature accordingly.
The display is reactivated when a sound is detected
Download from Www.Somanuals.com. All Manuals Search And Download.
pACK CONTENTS 9
or a button on the parent unit is pressed.
Registration
1 VOX: Voice Operated Transmission = Sound detection
The parent unit and baby unit are pre−registered.
If necessary, registration can also be completed
manually:
Baby unit/Parent unit
1 Switch the baby unit off. Switch set to OFF.
2 Cover the light sensor with a black cloth and switch
the baby unit on. Position ON.
3 With the parent unit switched on press and hold
this button on the parent unit for a few seconds.
Selecting a lullaby
Press the button on the right hand side of the parent
unit.
This icon appears in the display.
Use the button to select one of the 5 lullabies (1-5).
If no number is displayed, all of the lullabies will
continue to play in sucession until deactivated.
Use this button to adjust the volume to one of five
settings. The volume levels will be adjusted on both
the baby unit and parent unit simultaneously.
C1
4 This icon appears in the display.
5 The Power LED on the baby unit flashes quickly
for approx. 15 seconds.
This icon appears during the volume adjustment.
6 Press this button to confirm the selection.
Intercom function
7 C1.... appears initially, then C1....OK.
Press and hold the button.
This icon appears in the display.
Speak into the microphone to talk with the person
near the other unit.
When a connection is established, the image viewed
by the lens appears in the display.
If C1...X appears (registration failed), it may be
necessary to remove the power and remove the
batteries from the baby unit for a few seconds.
While talking, any lullabies playing are muted.
Range
This icon flashes in the display when the distance
between the baby unit and parent unit is too great.
Move the parent unit nearer to the baby unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 FAuLT FINDING
Beeping noise − Increase the distance between
6 Customer Support
( a c o u s t i c
feedback)
parent unit and baby unit.
− Reduce the volume on the parent
unit.
Should you experience difficulties operating the SC700
please refer to the problems and solutions guide below.
If you still experience difficulties please contact Oricom
Customer Support on 1300 889 785 for assistance.
Noise
− The battery power is too low.
Picture but no − Volume setting is too low.
sound
Problems and solutions
transmission
Problems
Solutions
Picture is in − The night vision function is active.
b l a c k a n d
white
The battery pack − The power adapter plug is not
in the
Equipment does − Baby unit and/or parent unit are not
not function
No reception
switched on.
− The batteries are empty or
defective.
− The power adapter plugs are not
connected.
− Baby unit and parent unit are not
registered.
connected.
parent unit is not
charged
− The parent unit and baby unit are
too far apart.
− The VOX sensitivity is set too low.
R e c e p t i o n − The parent unit and baby unit are
interference
too far apart.
− The battery power is too low.
− Other electronic devices are
causing interference in the field of
transmission.
Download from Www.Somanuals.com. All Manuals Search And Download.
TEChNICAL SpECIFICATIONS 11
F r e q u e n c y 2.4 GHz
range
7 Technical Specifications
Technical data
Permissible am- 0°C to 40°C
bient tempera-
ture
Feature
Value
Camera (baby Socket: 6 V DC
unit) Sensor: 1 night light sensor
IR diodes: 8
Monitor (parent Screen: 2,4" LC display
unit) Socket: 6 V DC
Power supply Power adapter plug, input:
Transmission 15 ~ 17 dBm
power (TX PA
power)
(parent unit)
100-240 VAC, 50-60Hz, 150 mA
Power adapter plug, output:
6 VDC, 800 mA
or rechargeable battery NiMH
3.6 V , 950 mAh
Initial charging Up to 16 h
time for battery
Power supply Power adapter plug, input:
(baby unit)
100-240 VAC, 50-60Hz, 150 mA
Power adapter plug, output:
6 VDC, 800 mA
or 4 AAA Alkaline batteries
Range
Up to 150 meters under optimum
conditions.
Range is reduced in buildings
through
walls, doors etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 GuARANTEE
Warranty (Australia)
(a) Warranty Oricom International Pty Ltd (Oricom) warrants that
the product is free from defects in materials and workmanship
for a period of 12 months effective from the date of purchase.
This warranty in no way affects your statutory warranty under
the Trade Practices Act 1974 or any other similar legislation.
It is important that you read the Warranty Card as it contains
full and additional details of the warranty, limitation of warranty
and conditions for receiving the warranty services during the
warranty period. The Warranty Card is located in the package.
Oricom will not be liable for consequential losses including loss of
profits arising from a cause of action in contract, tort or any other
statutory or common law (except where a statute or any law prohibits
this exclusion). The warranty does not extend to damage caused by
misuse, negligence, excessive voltage or lightning. This warranty in
no way affects your statutory rights. Full details of the warranty are
contained in the enclosed warranty card.
Customer Support
(b) Exclusion and limitation of liability. Oricom will not be in
breach of a warranty or condition expressly stated in this User
Guide or the Warranty Card or implied by the Trade Practices
Act and excludes any liability arising under any statutory or
common law for damages or any other remedy if the damage
occurs as a result of:
If you feel this product is not working correctly please consult
the user guide and ensure that you are using the product in
accordance with the instructions.
To order spare parts additional parent units, replacement parts
and in case of any technical issues you may have with this
product please consult our website for further information or send
us an email for a prompt response to your enquiry.
(i) Failure by you to follow the instructions in the User Guide
for the installation and proper functioning of the product;
(ii) Negligence on your part or misuse by you of the product;
In the unlikely event of a fault developing, please contact us
for assistance. If the product is then found to be faulty you will
be asked to return it directly to us with a copy of the purchase
receipt.
(iii) Any un-controlled external cause to the product not
functioning including but not limited to electricity failure,
lighting, over voltage;
(iv) Non adherence by you to the warnings in the User Guide
and the User Guide generally; and
(v) Modification to the product or services carried out to the
product by anyone other than Oricom or on Oricom's
behalf.
(vi) Batteries supplied with this product are covered under this
warranty for a period of 90 days.
Download from Www.Somanuals.com. All Manuals Search And Download.
Australia
Oricom International Pty Ltd
Locked Bag 658
Customer Support
Email: [email protected]
Phone: 1300 889 785
South Windsor, NSW 2756
Fax: +61 2 4574 8898
New Zealand
Baby First Limited
Customer Support
Email: admin@babyfirst.co.nz
Phone: 0800 429329
TM
Download from Www.Somanuals.com. All Manuals Search And Download.
|