TP30
Amplified Speakerphone
User Guide
Please keep this user guide for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
General Information ...............................................................2
Installation.............................................................................4
Wall Mounting........................................................................5
Location of controls ...............................................................6
Basic settings........................................................................8
Operation...............................................................................9
The Phone Book...................................................................13
Memory...............................................................................15
Caller ID............................................................................... 17
1
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
General Information
It is very important that you read the User Guide
carefully as it contains detailed information on
installation, programming and operational issues which
you will need to be aware of to ensure the Phone
operates properly. Following is a list of some of the
important issues and warnings which you need to be
aware of.
WARNING
This is a summary of the important issues you must
still read the User Guide in full.
• The telephone is designed for indoor use only. Do not
install the telephone in areas where there is the risk
of an explosion, excessive exposure to smoke, dust,
vibrations, chemicals, moisture and heat.
• Do not use your telephone during an electrical
thunderstorm as it is possible to get an electric
shock. Refer to information contained in Telstra White
pages directory.
• The earpiece of the handset may attract small metal
objects such as staples and pins. Care should be
taken when placing the handset near these items.
• Do not install in damp locations such as a bathroom
or laundry, do not expose the unit to direct sunlight.
• This phone is designed for connection to a PSTN
telephone line or an analogue extension port of a
PBX system. If you connect this device to a digital
extension of a PBX, damage may result to the PBX.
N13134
The A-Tick symbol indicates that this product complies with all current
Australian ACMA standards.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Notes for operation in New Zealand
The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with the minimum
conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in
all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all
of Telecom’s network services.
This equipment shall not be set to make automatic calls to the Telecom
“111” Emergency Service.
This equipment may not provide for the effective hand-over of a call to
another device connected to the same line.
This equipment should not be used under any circumstances that may
constitute a nuisance to other Telecom Customers.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance only if you
wish to connect more than 1 telephone to your telephone line. A standard
telephone line has a maximum REN capacity of 3 (RN of 5). It is possible
to connect 3 devices with a REN of 1 (RN of 1) with no degradation to the
product’s performance. Exceeding this limit may cause the volume of the
ringer in any phone to decrease or not ring at all.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
Installing batteries (supplied) in the phone
Warnings
Before opening the battery compartment, make sure the telephone
is disconnected from the telephone line.
You must install 4 AAA Alkaline batteries (supplied) in the phone
base to retain memory and CID information when the telephone
is disconnected from the line.
1. Use a flat-blade screwdriver or tip of a pen to lift and remove the
battery compartment door.
2. Insert four AAA batteries into the compartment as indicated by the
polarity symbols.
3. Snap the battery compartment door back into place.
When this
symbol appears on the display or the display dims, replace
the batteries. Always use 4 new high quality Alkaline AAA batteries.
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you
must connect an in line filter (not supplied) between the telephone socket and
your phone base to ensure that your broadband and TP30 will work properly.
If you do not install the filter you will experience interference on the
cordless phone and your Broadband may suffer dropouts. Please refer to
the user guide of the in line filter for installation.
In a home with broadband, every telephone, fax or answering system
must have a in-line filter connected, not just the one at the telephone
point that your modem is connected to.
Additional in-line filters can purchase from electronic stores.
Connecting the telephone
1. Plug one end of the curly cord into the socket on the handset.
2. Plug the other end of the curly cord into the left side of the phone.
3. Plug one end of the telephone line cord into the jack at the back of the
base, and the orher end into the wall socket.
4. Pick up the handset and listen for dial tone.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting
Wall Mounting
Desk Mounting
Fit the bracket as shown in the illustration. Insert the brackets three tabs
into the matching slots on the bottom of the phone and click into place.
Bracket postion for
desk mounting
Caution: Before installing or changing
the battery, make sure that the
telephone is not connected to the
telephone network or the mains power.
Made in China
Wall Mounting
1. Fit the bracket as shown in the illustration. Insert the braqckets three tabs
into the matching slots on the bottom of the phone and click into place.
Bracket postion for
wall mounting
2. Drill two holes vertically, one above the other, 83mm apart, and leave
the screws protruding from the wall by 5mm.
3. Turn around the handset hook (located by the hook switch) by 180
degress, so it will hold the handset in place when the phone is
mounted on the wall.
4. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate or on the wall. Gently push the
phone flush against the wall plate then slide the phone downwards
locking it into place.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of controls
19
18
17
16
15
1
2
CALL BACK
DELETE/OK
14
MEM
CID
13
12
11
MUTE
20
10
M1
M2
M3
M4
9
MUTE
3
8
STORE
RECALL
REDIAL
4
5
6
7
21
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of controls
22
RINGER
HI LOW OFF
RECALL
600/100
MW
V-/V+/HV/RINGERV
23
24
25
26
27
28
REC VOL
SPK VOL
1. Hook switch
15.
/
Buttons
2. Handset hook
3. Mute button
16. DELETE/OK button
17. Call back button
4. Store button
18. Display
5. Recall button
6. Redial button
19. Ring LED indicator
20. Mute button (on handset)
21. Curly cord socket
22. Message Indicator
23. Ringer Hi/Low/Off switch
24. Recall 600/100 switch
25. MW V-/V+/HV/Ringer switch
26. Telephone line socket
27. Receiver volume
7. Speakerphone button
8. Keypad
9. Memory buttons (M1, 2, 3, 4)
10. Memory paper card
11. MEM button
12. Caller ID button
13. Phonebook button
14. Message button
28. Speaker volume
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic settings
Basic settings
1. After installing the batteries, the display should flash the word
ENGLISH.
If not press and hold for approximately 4 seconds.
2. Select the desired language using or . Press DELETE/OK button.
3. Select the desired contrast setting (2=Default) using or .
Press DELETE/OK button.
4. Set the month using or . Press DELETE/OK button.
5. Set the day using or . Press DELETE/OK button.
6. Set the hour (00-23) using or . Press DELETE/OK button.
7. Set the minute using or . Press DELETE/OK button.
Display(LCD)Contrast/Time Setting
If you wish to change the language, contrast, time settings at a later date,
press and hold button for approximately 4 seconds and repeat steps 2-7
above.
Select country version
1. For New Zealand Select Recall = 600 on the switch on the rear side of
the unit, New Zealand Recall/flash time is 600ms, the unit is now set
up to insert 0/00 when receiving CID log in accordance with Telecom
NZ requirements. Or for Australia Select Recall = 100.
2. Lift and replace the handset to initialize.
NOTE:
If the switch is in the incorrect position Caller ID and the recall function
will not operate correctly.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation
When the telephone is not in use, the date and time, number of new and
total number of calls STORED in the Caller ID MEM will be shown in the
display. The display will show the caller number (and name if available).
Making a call
1. Pick up the handset or press
wait for a dial tone.
button (the speaker LED will light) and
2. Dial the number you wish to call. The display will show the number that
you are dialling. If you dial a number over 14 digits long, it will show
the last 14 digits only.
3. When you have completed your call, hang up the handset or press
button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation
by pressing the
accordingly.
button and picking up or hanging up the handset
Pre Dialing a Call
1. Dial the number you wish to call. To correct a number press the
DELETE/OK button for each incorrect digit.
2. Pick up the handset or press the
button.
Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the CALL# and the callers telephone number (with
caller id service activated).
This feature allows you to decide to pick up the phone or not depending
on who is calling.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
If you want to talk to the caller:
1. Pick up the handset or press
button to answer the call.
2. At the end of the call, return the handset to the cradle or press
.
Redial function
The last number dialled will be saved in the telephone automatically. To use
the redial facility, proceed as follows:
1. Lift the handset or press
button .
2. Press the REDIAL button. The last saved redial number will now be dialled.
Pause
If needed for phone banking or behind a PBX system, you can insert a 3.6
second pause while dialing or storing a number into MEM. Press REDIAL
button at the desired point in number to insert a pause.
Recall and call waiting
Press the Recall button followed by the extension number to transfer
calls when connected to a PBX (TBR only).
Access to additional network services can be gained by using the Recall
button, * and # keys. Contact your network operator for more information.
The recall button timing can be switched between either 100ms (AUS) /
600ms (NZ), using the Recall switch located on the rear side of the handset.
To Turn on Telstra call waiting (Australia)
You can use the recall button to answer a second call while you are on
the phone. However this service will need to be turned on. For example to
turn on Telstra's Call Waiting service:
1. Lift the handset and wait for dial tone then Press *43#.
2. You will hear the service message and then hang up.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you of
another incoming call. If you wish to answer this call
1. Press Recall button listen for dial tone then Press 2 to put the current
call on hold and talk with the second caller.
2. Subsequent presses of Recall button listen for dial tone then Press 2
will toggle you between these 2 callers.
Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch.
Select high (HI) or soft (LOW) sound level. When you do not want to be
disturbed, slide the RINGER switch to the OFF position.
The bright Red light (LED) on the base will flash with all incoming calls.
Volume Control
Speaker Volume Control
You can adjust the speaker volume level that suits you by sliding the SPK
VOL switch.
Handset Receiver volume control
You can adjust the handset receiver volume level that suits you by sliding
the REC VOL switch.
Mute
If you wish to speak privately to someone else in the room without your caller
overhearing, press and hold the MUTE button on the underside of the handset.
you will still be able to hear the callers but they cannot hear you during
the mute operation. To resume normal conversation, release the button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Message Waiting Indicator
Some PBX systems have a function called Message Waiting. On the back
of the telephone is a switch marked (MW/V-/V+/HV/RINGER), this is used
to select one of the following options: LED+, LED-, Visual Ring Indicator
( select one of the following options: LED+, LED-, Visual Ring Indicator)
and high voltage (HV).
By selecting the appropriate option for your system the telephone will
indicate if there are any voice mail messages available.
This function operates differently depending on the PBX system in question
therefore please contact your system administrator for more information.
If the unit is not connected through a PBX please select ring indication.
please contact your system administrator for more information.
Hearing Aid Compatibility
This unit is compatible with most inductively coupled hearing aids on the
market. However due to the wide range of hearing aids available we cannot
guarantee that the TP30 will function error free with every model.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The Phone Book
The Phone Book
The Phone Book will store 32 telephone numbers (22 digits max) and
their associated names (16 characters max) with entries arranged
alphabetically.
A stored phone number can be dialled using fewer keystrokes than if
dialled manually. If you subscribe to a Caller ID service, the name/number
of the caller will be shown when you receive an incoming call.
Storing names/numbers
1. Press
.
2. Press STORE.
3. Press STORE again.
4. Enter the telephone number to be stored (up to 22 digits). Press STORE.
5. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter.
6. Press STORE.
Dialling from the Phone Book
1. Press
.
2. Scroll to the required memory location using or . To quick-search
in the Phone Book press the corresponding number button one or
more times for the first letter.
3. Press CALL BACK to dial the displayed number. If you press
the
phone will return to standby mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Phone Book
Changing phone numbers/names
1. Press
.
2. Scroll to the required memory location using or .
3. Press STORE EDIT? is displayed. Press STORE.
4. Changes to the displayed telephone number can be made using
DELETE/OK. Press STORE.
5. Changes to the displayed name can be made using DELETE/OK
6. Press STORE to confirm the changes.
Deleting a phone book entry
1. Press
.
2. Scroll to the required memory location using or .
3. Press DELETE/OK. DELETE will be displayed.
4. Alternatively press and hold DELETE/OK button until the display shows
“DELETE ALL” .
5. Press DELETE/OK confirm.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory
Memory
The telephone also has 4 one-touch, 10 two-touch memories and a
mailbox button for frequently dialled telephone numbers.
When a number is stored into Memory you only press one or two buttons
dependent on location to make a call.
The one-touch memories are (mail box), M1-M4, the two-touch
memories are accessed using the telephone keypad digits 0-9.
Storing One-touch Memories + Mailbox Button
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits). Press
STORE button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter. Press STORE button.
4. “location ?” is display.
5. Press either (mail box), M1-M4 to store the number.
Dialling using One-touch Memories
1. Lift the handset or press
button and wait for a dialling tone.
2. Press either
now be dialled.
(mail box), M1-M4, the stored telephone number will
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory
Storing two-touch Memories
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits). Press
STORE button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter. Press STORE button.
4. “location ?” is display.
5. Press either 0-9 to store the number.
Dialling using Two-touch Memories
1. Lift the handset or press
button and wait for a dialling tone.
2. Press MEM button.
3. Select a memory location by pressing the relevant keypad digit 0-9.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Caller ID
Caller ID allows you to see who is calling before you answer a call and to
see who has called in your absence. If the number is stored in the indirect
memory, its associated name will be displayed instead. The CID memory
will store up to 32 name/telephone numbers stored chronologically. The
sequence number is shown in the top right-hand side of the display.
When the memory is full, the oldest number will be deleted automatically
as the new call is logged. New calls are indicated in plain text in the
display and flashing of the red visual ring indicator light.
Please note!
In order for numbers to be shown, the Caller ID service must be
provided by your network operator and a current subscription in place.
Contact you telephone service operator for more information.
Retrieving and dialling CID numbers
1. Press CID button to select caller-id mode.
2. Press either or to review the numbers stored in the Caller ID
memory.
3. To dial a displayed telephone number either press CALL BACK OR
botton, the displayed telephone number will now be dialled. If you
press
botton,then the phone will return to standby mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
CID Call Types
Besides showing telephone numbers, the display can show a number of
messages:
OUT OF AREA
PRIVATE
NEW
It is an International call or a call from a PBX (no
information received).
Information on the number is blocked. The call could
also be from a PBX.
Number not previously seen.
Several calls have been received from the same caller.
Message waiting
CALL WAITING
Type II CID
Deleting Numbers
1. Scroll to the telephone number you wish to erase using or .
2. Press DELETE/OK button, “DELETE/OK” will be displayed, alternatively
press DELETE/OK button until the display shows “DELETE ALL”.
3. Press DELETE/OK button confirm.
Transferring Numbers to the Phone Book
1. Scroll to the telephone number you wish to copy using or .
2. Press STORE. “copy number?” is display.
3. Press STORE confirm.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Information (Australia)
Warranty Terms and Conditions (Australia)
Oricom makes no other warranties or conditions, express or implied,
including as to acceptable quality and fitness for a particular purpose,
except as stated in this Warranty. Any implied warranties that may
be imposed by law are limited in duration to the Warranty Period.
Oricom warrants that the product is free from defects in materials
or workmanship during the Warranty Period. This Warranty does
not extend to any product from which the serial number has been
removed or was purchased outside of Australia.
This warranty in no way affects your statutory warranty rights
under the Competition and Consumer Act 2010 or any other similar
legislation.
The Warranty Period will be 1 year from the date of purchase of the
product evidenced by your dated sales receipt. You are required
to provide proof of purchase as a condition of receiving warranty
services. You are entitled to a replacement product or repair of the
product according to the terms and conditions of this document if your
product is found to be faulty within the Warranty Period. This Warranty
extends to the original purchaser only and is not transferable.
Batteries or Battery Packs (if supplied) with this product are covered
under this warranty for a period of 90 days. Products distributed
by Oricom are manufactured using new materials or new and used
materials equivalent to new in performance and reliability. Spare
parts may be new or equivalent to new. Spare parts are warranted to
be free from defects in material or workmanship for thirty (30) days
or for the remainder of the Warranty Period of the Oricom branded
product in which they are installed, whichever is longer. During the
Warranty Period, Oricom will where possible repair and if not replace
the faulty product or part thereof. All component parts removed under
this Warranty become the property of Oricom. In the unlikely event
that your Oricom product has a re curring failure, Oricom may, subject
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Terms and Conditions (Australia)
to the Competition and Consumer Act 2010, at its discretion, elect to
provide you with a replacement product of its choosing that is at least
equivalent to your product in performance. Oricom does not warrant
that the operation of the product will be uninterrupted or error free.
Oricom is not responsible for damage that occurs as a result of your
failure to follow the instructions that came with the product. These
terms and conditions together with any specific terms and conditions
contained in the user guide to the product purchased constitute
the complete and exclusive agreement between you and Oricom
regarding the product. No change to the conditions of this Warranty
is valid unless it is made in writing and signed by an authorised
representative of Oricom.
Oricom will not be in breach of a warranty expressly set out in this
User Guide or under the Competition and Consumer Act 2010 and
excludes any liability for damages or any other remedy arising under
any other legislation or the common law if the damage occurs as a
result of:
1 failure by you to adhere to the warnings and follow the instructions
set out in this user guide for the proper installation and use of the
product;
2 negligence on your part or misuse by you of the product;
3 an uncontrollable external cause which results in the product not
functioning including but not limited to power failure, lightning or
over voltage; and
4 modification to the product or services carried out on the
production by anyone other than Oricom or Oricom!/s authorised
service provider.
Oricom will not be liable for any damages caused by the product
or the failure of the product to perform, including any lost profits or
savings or special, incidental or consequential damages. Oricom is not
liable for any claim made by a third party or made by you on behalf
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Terms and Conditions (Australia)
of a third party. This limitation of liability applies whether damages
are sought, or a claim made, under this Warranty or as a tort claim
(including negligence and strict product liability), a contract claim or
any other claim. However, this limitation of liability will not apply to
claims for personal injury. Nothing in this Warranty excludes, restricts
or modifies any condition, warranty, right or remedy which pursuant to
the Competition and Consumer Act 2010 applies to this Warranty and
which may not be so excluded, restricted or modified. For warranties
that cannot be excluded, restricted or modified, Oricom limits the
remedies available to those specified in the relevant legislation.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
Customer Support
If you have any problems setting up or using this product you will find
use-full tips and information in the Troubleshooting section of this user
guide as well as “Frequently Asked Questions” on our website
If you have further questions about using the product after reviewing
the resources above or would like to purchase replacement parts or
accessories please call our Customer Support Team. Our dedicated local
support team are more likely to be able to help you than the retailer
where you made your purchase.
Please retain your purchase receipt and attach to the back page of
this user guide as you will need to produce this if warranty service is
required.
Take a few moments to register your product online:
New Zealand
Australia
Email: [email protected]
Phone: 0800 674 266
Oricom International Pty Ltd
Locked Bag 658
(Monday to Friday 10am to 7pm
NZST)
South Windsor, NSW 2756
Australia
Email: [email protected]
Phone: 1300 889 785
(Monday to Friday 8am to 6pm AEST)
Fax: (02) 4574 8898
Download from Www.Somanuals.com. All Manuals Search And Download.
|