Deluxe Weather Forecaster with
Wireless UV Sensor
Model: BAR609HGA
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Deluxe Weather Forecaster with
Wireless UV Sensor
Set Clock ................................................................ 10
Switch Clock Display .............................................. 10
Alarm ........................................................................ 10
View Alarm Settings ................................................ 11
Set Alarm ................................................................ 11
Activate Alarm ......................................................... 11
Silence Alarm .......................................................... 11
Barometer................................................................. 11
Barometric Trend .................................................... 11
Set Unit and Altitude ............................................... 11
Weather Forecast .................................................... 12
Temperature and Humidity ..................................... 12
Select Temperature Unit ......................................... 12
Select Channel Number ......................................... 12
Minimum / Maximum Records ................................ 13
Ice Warning............................................................. 13
Heat Index ................................................................ 13
UV Sensor (UVN128) ............................................... 14
Setup Sensor .......................................................... 14
UV Index Readings ................................................. 15
Moon Phase ............................................................. 15
Backlight .................................................................. 15
Reset System ........................................................... 15
Safety and Care ....................................................... 16
BAR609HGA
USER MANUAL
CONTENTS
Introduction................................................................ 2
Product Overview ...................................................... 3
Front View ................................................................ 3
Back View ................................................................. 4
Thermo-Hygro Sensor (THGR122NX) ..................... 5
Front View (UVN128) ............................................... 6
Back View (UVN128) ................................................ 6
Getting Started........................................................... 7
Batteries ................................................................... 7
Access Front Button Panel ....................................... 7
Change Settings ....................................................... 7
Table Stand or Wall Mount........................................ 7
Thermo-Hygro Sensor (THGR122NX) ...................... 7
Setup Sensor ............................................................ 8
Data Transmission .................................................... 9
Search for Sensor ..................................................... 9
Clock ........................................................................... 9
Turn Atomic Clock ON / OFF .................................. 10
1
BAR609HGAmanual-ENG
1
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings .................................................................. 16
Troubleshooting ...................................................... 17
Specifications .......................................................... 17
Main Unit Dimensions ............................................. 17
Thermo-Hygro Sensor Dimensions ........................ 17
UV Sensor Dimensions .......................................... 17
Temperature ........................................................... 17
Relative Humidity .................................................... 18
Barometer ............................................................... 18
Thermo-Hygro Sensor (THGR122NX) ................... 18
Clock ....................................................................... 18
Power ..................................................................... 18
UV Sensor (UVN128) ............................................. 18
About Oregon Scientific ......................................... 19
FCC Statement ......................................................... 19
Declaration of Conformity ....................................... 20
INTRODUCTION
Thank you for selecting the Oregon ScientificTM Deluxe
Weather Forecaster with Wireless UV Sensor
(BAR609HGA). This device bundles precise time
keeping, UV measurement, weather forecast, barometric
trend with altitude adjustment, and indoor and outdoor
temperature and humidity monitoring features into a
single tool you can use from the convenience of your
home.
In this box, you will find:
• Main unit
• Thermo-Hygro sensor (THGR122NX)
• UV sensor (UVN128)
Keep this manual handy as you use your new product.
It contains practical step-by-step instructions, as well
as technical specifications and warnings you should
know.
2
BAR609HGAmanual-ENG
2
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT OVERVIEW
FRONT VIEW
1. SNOOZE / LIGHT button
2. Weather Forecast & Barometric Area
3. Indoor / Outdoor Temperature & Humidity Area
4. UV Index (UVI) Area
5. Moon Phase
6
Clock / Alarm Area
7.
and : increase or decrease setting / activate
or deactivate Atomic Clock
8. RESET hole
9. CHANNEL: switch remote sensor
10.HEAT INDEX: switch between heat index, indoor /
outdoor temperature and humidity displays
11. MEMORY: view current, max and min temperature,
humidity and UVI
12.MODE: change clock display / settings
13.°C / °F switch
14.
: display / change alarm time, enable / disable
alarm
15.PRESSURE: change altitude measurement unit (mb
or inHg) and altitude compensation value
3
BAR609HGAmanual-ENG
3
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK VIEW
1. Wall mount
2. Battery compartment
3. Table stand
4
BAR609HGAmanual-ENG
4
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
THERMO-HYGRO SENSOR (THGR122NX)
1. LCD display
1. Wall mount hole
2. RESET
2. LED status indicator
3. Channel number (1 - 3)
4. Battery compartment
(Battery compartment cover not shown)
5
BAR609HGAmanual-ENG
5
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK VIEW (UVN128)
FRONT VIEW (UVN128)
1. Sensor
1. RESET hole
2. LED indicator
2. Connector for stake apparatus
6
BAR609HGAmanual-ENG
6
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGE SETTINGS
GETTING STARTED
BATTERIES
1. Press and hold MODE for 2 seconds to enter setting
mode.
Batteries are not supplied with this product. You will need
to purchase the following alkaline batteries:
2. Press
or
to change settings.
3. Press MODE to confirm.
•
•
•
Main unit
Remote sensor 2 x UM-4 / AAA 1.5V
UV sensor 2 x UM-3 / AA 1.5V
3 x UM-3 / AA 1.5V
TABLE STAND OR WALL MOUNT
Use the stand on the back of the product, or mount it on
a wall with a nail.
Insert batteries before first use, matching the polarity as
shown in the battery compartment. For best results,
install batteries in the sensors before the main unit. Press
RESET after each battery change.
NOTE Do not use rechargeable batteries.
shows when batteries are low.
UNIT
LOCATION
Main Unit &
Remote Sensor
Temperature / Humidity Area
THERMO-HYGRO SENSOR (THGR122NX)
This product is shipped with a THGR122NX Thermo/
Hygro Sensor that collects Temperature and Humidity
data. Data can be collected from up to 3 sensors.
Additional sensors sold separately.
UV Sensor
UV Index Area
ACCESS FRONT BUTTON PANEL
The front button panel is located inside the right portion
of the main unit. Slide it right to access the buttons.
7
BAR609HGAmanual-ENG
7
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
For best results:
SETUP SENSOR
• Insert the batteries and select the channel before you
mount the sensor.
1. Open the sensor battery compartment with a small
Phillips screwdriver.
• Place the sensor out of direct sunlight and moisture.
2. Insert the batteries, matching the polarity as shown in
the battery compartment.
• Do not place the sensor more than 98 feet (30 meters)
from the main (indoor) unit.
SWITCH
OPTION
• Position the sensor so that it faces the main (indoor)
unit, minimizing obstructions such as doors, walls, and
furniture.
Channel
Channel 1 - 3. If you are using
more than one sensor, select a
different channel for each sensor.
• Place the sensor in a location with a clear view to the
sky, away from metallic or electronic objects.
3. Set the channel. The switch is located in the battery
compartment.
• Position the sensor close to the main unit during cold
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
4. Place the sensor near the main unit. Press RESET
on the sensor. Then, press and hold MEMORY and
CHANNEL on the main unit to initiate signal sending
between the sensor and the main unit. The reception
icon on the main unit will blink for approximately
3 minutes while it is searching for the sensor. (Refer
to the Data Transmission section for more
information.)
You may need to experiment with various locations to
get the best results.
Standard Alkaline batteries contain signifcant amounts
of water. Because of this they will freeze in low
temperatures of approximately 10°F. Disposable Lithium
batteries have a much lower threshold for temperature
with an estimated freezing range of below -40°F. The
Liquid Crystal Display in outdoor thermometers will
remain operational to -20°F with adequate power.
5. Close the remote sensor battery compartment.
6. Secure the sensor in the desired location using the
wall mount or table stand.
8
BAR609HGAmanual-ENG
8
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless ranges can be impacted by a variety of factors
such as extremely cold temperatures. Extreme cold may
temporarily reduce the effective range between the
sensor and the base station.
SEARCH FOR SENSOR
To search for a sensor, press and hold MEMORY and
CHANNEL for 2 seconds.
If the unit's performance fails due to low temperature,
the unit will resume proper functioning as the
temperature rises to within the normal temperature range
(i.e no permanent damage will occur to the unit due to
low temperatures).
NOTE If the sensor is still not found, check the batteries,
obstructions, and remote unit location.
NOTE Signals from household devices such as
doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product performance.
The reception will resume once the interference ends.
DATA TRANSMISSION
Data is sent from the sensor(s) every 40 seconds.
The reception icon shown in the Temperature and
Humidity Area shows the status.
CLOCK
ICON
DESCRIPTION
This product shows the current time, and day of week in
English, French, German, Italian, or Spanish. The US
Atomic Clock in Boulder, Colorado automatically updates
this information unless you disable the feature. The
signals are collected by the main unit when it is within
932 miles (1500 km) of a signal.
Main unit is searching for
sensors.
At least 1 channel has
been found.
Channel 1 is selected (number
will change depending on the
sensor you select)
Initial reception takes 2 - 10 minutes, and is initiated
when you first setup the unit, and whenever you press
RESET. Once complete, the reception icon will stop
blinking. The icon is shown in the Clock Area.
The selected sensor cannot
be found. Search for the
sensor or check batteries.
--- shows in Outdoor
Temp / Humidity Area
9
BAR609HGAmanual-ENG
9
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SET CLOCK
STRONG SIGNAL
WEAK SIGNAL
NO SIGNAL
You only need to do this if you cannot receive the Atomic
Clock signal, or you wish to adjust the appropriate time
zone.
1. Press and hold MODE for 2 seconds. The Clock Area
will blink.
To force a manual search forAtomic Clock signals, press
and hold for 2 seconds. If no signal is found, check
the batteries.
2. Select the time zone, hour, minute, year, month, day,
or
and language. Press
Press MODE to confirm.
to change the setting.
NOTE If the Atomic Clock signal is received and the
hour is incorrect, use the "time zone offset" feature to
adjust it to the appropriate time zone. Please see "Set
Clock section" for instructions.
NOTE The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish.
NOTE The time zone options are (PA) Pacific, (CE)
Central, (MO) Mountain, and (EA) Eastern.
TURN ATOMIC CLOCK ON / OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold for 2 seconds. Then, manually
set the clock following the Set Clock section for
instructions.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF.
ALARM
This product is equipped with a 2-minute crescendo
alarm.
10
BAR609HGAmanual-ENG
10
05/1/18, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEW ALARM SETTINGS
BAROMETER
Press . The alarm time and
Clock Area.
status will show in the
This product tracks barometric pressure changes over
the past 24 hours to provide the weather forecast
and a trend line showing the direction of barometric
change. Barometric changes are measured by the main
(indoor) unit.
SET ALARM
1. Press
to switch to alarm display.
2. Press and hold
settings will blink.
again for 2 seconds. The alarm
BAROMETRIC TREND
3. Select the hour and minute. Press
to confirm.
or
to change
TREND
DESCRIPTION
settings. Press
Rising
ACTIVATE ALARM
Press
to activate or deactivate the alarm.
Steady
Falling
shows in the Clock / Alarm Area when the
alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press SNOOZE / LIGHT to
silence it for 8 minutes. Or, press to turn it off until
the next day.
SET UNIT AND ALTITUDE
You can set the unit of measurement (mb or inHg) and
altitude. Doing this allows the product to take more
accurate barometric measurements.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after
8 minutes.
11
BAR609HGAmanual-ENG
11
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press PRESSURE to select the unit of measurement:
mb or inHg.
SELECT TEMPERATURE UNIT
Slide the °C / °F switch into the desired location. The
switch is located on the front button panel. The setting
for the main unit overrides the Thermo-Hygro sensor
setting.
2. Press and hold PRESSURE for 2 seconds.
3. Select the altitude (-328 feet to 8203 feet in increments
to change the
of approximately 33). Press or
setting. Press PRESSURE to confirm.
SELECT CHANNEL NUMBER
Press CHANNEL to switch between sensors 1-3.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
within a 30 to 50 mile (19 - 31 km) radius with 70 to
75 percent accuracy. The weather forecast is always
displayed.
The icon shows the selected sensor.
KINETIC-WAVE
ICON
PARTLY
CLOUDY
CLEAR
CLOUDY
RAINY
Remote
Display
Remote
Remote
Display
Display
Channel 1 Channel 2
Indoor
DESIGNATED
DISPLAY
Display
Channel 3
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEMORY.
TEMPERATURE, HUMIDITY AND HEAT INDEX
This product can display current, minimum, and maximum
temperature, humidity percentage and heat index
information collected by the remote sensors and main
(indoor) unit.
NOTE If you use a sensor that collects only temperature
data, humidity will not be shown.
Outdoor data is collected and displayed every 40
seconds. Indoor data is collected and displayed every
10 seconds.
12
BAR609HGAmanual-ENG
12
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
and relative humidity. The heat index (apparent
temperature) is how hot the heat-humidity combination
makes you feel.
MINIMUM / MAXIMUM RECORDS
To view temperature, humidity or UV Index current,
maximum (MAX) and minimum (MIN) records:
The BAR609HGA’s heat index feature advises 4 levels
of warning if the temperature is high.
1. Press CHANNEL to select channel 1-3 or indoor.
2. Press MEMORY to view the selected channel's
records.
WARNING
HEAT INDEX
MEANING
°F
130 or
above
°C
54.5 or
above
Press MEMORY to toggle between current, maximum
(MAX) and minimum (MIN) records. To clear the records,
press and hold MEMORY for 2 seconds. A beep will
sound to confirm that the memory has been cleared.
E x t r e m e
danger
Strong possibility of
heat stroke
Danger
105-129
90-104
40.5-53.9
32.2-40
Heat exhaustion likely
E x t r e m e
caution
Possibility of heat
dehydration
ICE WARNING
The temperature range at which water begins to freeze
and turns to ice is approx. 37°F (3°C) to 28°F (-2°C). It
is during this period that ice becomes most slippery,
creating hazardous surface conditions dangerous for
travelling.
Caution
80-89
26.6-31.7
Possibility of heat
exhaustion
• To display the heat index, press HEAT INDEX.
• To toggle between current / maximum / minimum
readings, press HEAT INDEX, then press CHANNEL
to select channel 1-3 or indoor, followed by MEMORY.
The BAR609HGA’s Ice Warning feature gives out
temperature readings to warn you when the temperature
is approaching freezing. If Channel 1 sensor falls
between 37°F to 28°F (3°C to -2°C), the freeze alert
• To toggle between temperature / humidity and heat
index display, press and hold HEAT INDEX for 2
seconds. Press HEAT INDEX again to stop this
feature.
icon
will flash on the main unit display.
HEAT INDEX
NOTE If the heat index is below 80°F / 26°C, or the
desired channel is not working, the heat index will display
“NA”.
Heat index is the temperature the body feels when heat
and humidity are combined. The temperature you feel
does not always correspond to the actual air temperature
13
BAR609HGAmanual-ENG
13
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
4. You can place the sensor in the ground. To do this, fix
the stake into the base of the sensor.
UV SENSOR (UVN128)
The UV sensor measures the UV Index. It transmits data
to the main unit every 73 seconds and has a maximum
transmission range of 328 feet (100 meters).
u
v
s
e
n
s
o
r
u
v
s
e
n
s
o
r
SETUP SENSOR
1. Insert the batteries as shown.
Then place the stake into the ground up to the insertion
level indicator (see point 1 below) at your desired
location.
2. Close the battery door and press RESET to turn the
sensor on.
u
v
s
e
n
s
o
r
1
3. Press and hold CHANNEL and MEMORY on the main
unit to initiate a signal search. The UVI sensor icon
on the main unit will flash to show it is searching
for the sensor. It will stop flashing when it has found
the sensor. If the main unit cannot find the sensor,
"- -" will appear on the LCD.
14
BAR609HGAmanual-ENG
14
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE To get the most accurate readings, place the
sensor in a position that has minimum obstructions (i.e.
walls and doors) between it and the main unit. The
sensor should be placed in an upright position, away
from any shade or shadows that may affect how accurate
the sensor provides readings.
MOON PHASE
The Calendar must be set for this feature to work.
see set clock section:
• Press or
next or previous day.
to view the moon phase for the
• Press and hold or
years (2001 to 2099).
to scan quickly through the
UV INDEX READINGS
To interpret the UV readings on the LCD display, see
the table below.
New Moon
Waxing Crescent
BACKLIGHT
UV MESSAGE UV INDEX
PRECAUTION
First Quarter
Low
Med
High
1-2
3-5
6-7
Apply sunscreen
Waxing Gibbous
Full Moon
Wear protective clothing
Wear sunglasses and
protective clothing
Waning Gibbous
Last Quarter
Avoid the sun between
10am and 4pm
Very high
Extreme
8-10
Waning Crescent
11-25
Very strong rays stay
indoors
BACKLIGHT
Press SNOOZE / LIGHT to activate the backlight for
8 seconds.
RESET SYSTEM
The RESET button is located behind the front button
panel for the main unit. Press RESET when you change
the batteries and whenever performance is not behaving
15
BAR609HGAmanual-ENG
15
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
as expected (for example, unable to establish radio
frequency link with sensor or Atomic Clock).
Do not make any changes or modifications to this
product. Unauthorized changes may void your right to
use the product. The technical specification of this
product and contents of this user guide are subject to
change without notice. Images not drawn to scale.
NOTE When you press RESET, all settings will return
to default value, and you will lose all stored information.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
WARNINGS
This product is designed to give you years of service if
handled properly. Observe the following guidelines:
• Never immerse the product in water. This can cause
electrical shock and damage the product.
• Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a long
period of time.
• Do not scratch the LCD display.
16
BAR609HGAmanual-ENG
16
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
SPECIFICATIONS
MAIN UNIT DIMENSIONS
L x W x H
Check here before contacting our customer service
department.
5.5 x 2.5 x 6.2 inches
(142 x 63 x 158 mm)
Weight
12.96 ounces (366 g)
with battery
Problem Symptom
Remedy
Calendar
Change language
Strange date /
month
THERMO-HYGRO SENSOR DIMENSIONS
Clock
Cannot adjust Disable Atomic Clock
clock
L x W x H
Weight
3.6 x 2.4 x 0.79 inches
(92 x 60 x 20 mm)
Cannot auto- 1. Adjust batteries
synch
2.22 ounces (63 g)
without battery
2. Press RESET
3. Manually activate
Atomic Clock
feature
UV SENSOR DIMENSIONS
W X H X L
2.7 x 4 x 1.9 inches
(67.7 x 102.5 x 47 mm)
Temp
Shows "LLL" Temperature is out-of-
or "HHH"
Weight
2.89 ounces (82 g)
without battery
range
Sensor
Cannot locate Check batteries
remote
sensor
TEMPERATURE
Check location
Unit
°F or °C
Indoor Range
-23°F to 122°F
(-5°C to 50°C)
-22°F to 140°F
(-30°C to 60°C)
0.2°F (0.1°C)
Cannot
change
channel
Check sensors. Only
one sensor is working
Sensor
Outdoor Range
Resolution
Data does
not match
main unit
Initiate a manual sensor
search
17
BAR609HGAmanual-ENG
17
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK
RELATIVE HUMIDITY
Atomic Clock
Clock display
Hour format
Time zone
Auto or manual (disabled)
HH:MM:SS
Range
25% to 95%
1%
Resolution
Memory
12hr AM/PM
Minimum / maximum
PA (Pacific), MO
(Mountain), CE (Central)
or EA (Eastern)
BAROMETER
Unit
mb or inHg
Calendar
Alarm
MM/DD; weekday in
5 languages (E, D, F, I, S)
Range
700 to 1050 mb
(20.67 to 30.01 inHg)
Single alarm with
2- minute crescendo and
8-minute Snooze
Resolution
Altitude
1 mb (0.03 inHg)
-328 to 8203 feet
Display
Rainy, cloudy, partly
cloudy, sunny
POWER
Main unit batteries
Thermo-Hygro batteries
UV Sensor
3 x UM-3 (AA) 1.5V alkaline
2xUM-4 (AAA) 1.5V alkaline
2xUM-3 (AA) 1.5V alkaline
THERMO-HYGRO SENSOR (THGR122NX)
RF frequency
Range
433 MHz
98 feet (30 meters)
with no obstructions
UV SENSOR (UVN128)
Transmission
Channel No.
Every 40 seconds
1-3
UV Range
328 feet (100 meters)
Every 73 seconds
Transmission
18
BAR609HGAmanual-ENG
18
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT OREGON SCIENTIFIC
FCC STATEMENT
more about Oregon Scientific products such as digital
cameras; MP3 players; children's electronic learning
products and games; projection clocks; health and
fitness gear; weather stations; and digital and conference
phones. The website also includes contact information
for our customer care department in case you need to
reach us, as well as frequently asked questions and
customer downloads.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
WARNING Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
We hope you will find all the information you need on
our website, however if you're in the US and would like
to contact the Oregon Scientific Customer Care
department directly, please visit: www2.oregonscientific.
com/service/support OR Call 949-608-2848.
NOTE This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
For international enquiries, please visit: www2.
oregonscientific.com/about/international/default.asp
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
19
BAR609HGAmanual-ENG
19
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
• Increase the separation between the equipment and
receiver.
declare that the product
Product No.: BAR609HGA
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Product Name: Wireless Weather Station
Manufacturer: IDT Technology Limited
• Consult the dealer or an experienced radio / TV
technician for help.
Address:
Block C, 9/F, Kaiser Estate, Phase 1,
41 Man Yue St., Hung Hom, Kowloon,
Hong Kong
DECLARATION OF CONFORMITY
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.
The following information is not to be used as contact
for support or sales. Please call our customer service
com), or on the warranty card for this product) for all
inquiries instead.
We
Name:
Oregon Scientific, Inc.
Address:
19861 SW 95th Place, Tualatin, Oregon
97062 USA
Telephone No.:1-800-853-8883
Fax No.: 1-503-684-3332
20
BAR609HGAmanual-ENG
20
05/1/18, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2005 Oregon Scientific. All rights reserved.
086-003767-011
Download from Www.Somanuals.com. All Manuals Search And Download.
|