QUICK START GUIDE
WR606 Desktop Emergency Weather Station
TURNING ON THE UNIT
FOR THE FIRST TIME
UNPACK
D
A
Make sure that you have all of the parts shown here before
setting up your Desktop Emergency Weather Station.
NOTE:
each step in order and confirm each setting within one minute, the WR606 will automatically exit the setup process and
complete
this setup process to ensure your unit is ready to receive all warning messages.
Desktop Emergency
Weather Station
THGN132N Remote
Outdoor Sensor
UM-3 (AA) 1.5V
batteries
Instruction
LCD Display
7.5V Adaptor
1×
1×
4×
1×
Open the battery cover and press the RESET button.
INSTALL REMOTE
Press
or
to select 12 or 24 time format and then
press the MENU button to confirm.
B
OUTDOOR SENSOR
Press
or
to select PM/AM HOUR setting and press the
MENU button to confirm.
IMPORTANT Set up the remote outdoor sensor first before setting the main unit.
1. Open the battery compartment and insert battery, matching the polarity.
2. Select a channel then press RESET.
or
Press
to confirm.
to select MINUTE setting and press the MENU button
3. Close the battery door.
4. Place the remote outdoor sensor within 30 m (98 ft) from the main unit.
Press
or
to select month/day or day/month and press the
MENU button to confirm.
2
or
or
Press
Press
Press
Press
to select YEAR and press the MENU button to confirm.
to select MONTH and press the MENU button to confirm.
to select DAY and press the MENU button to confirm.
to select LANGUAGE (E=English / F=French /
1
2
3
4
5
LED status indicator
Wall mount hole
1
4
5
Battery compartment
RESET hole
3
CHANNEL switch
or
or
NOTE Press RESET after each battery change or channel selection.
S=Spanish) and press the MENU button to confirm.
to select.
Press
to select “Set Channel” Mode and press MENU
INSTALL MAIN UNIT
C
button to confirm
Press
to select "Auto" channel seeking and press the EXIT
and press EXIT button again to get back to time mode.
If you know the specific Channel (1 through 7) that is applicable to your
or
EXIT button again to get back to time mode.
to confirm and
to select. Press the EXIT button
location, press
press
Press
to switch to the NOAA ON mode.Your radio will
automatically search
the appropriate channel that is in your area. Once you hear the 24-hour weather
broadcast on your radio, your radio has successfully found the appropriate channel.
If you set your channel manually, the 24-hour weather broadcast will start
immediately.
NOAA On
Press
to switch to the NOAA STANDBY mode. The radio is in Standby
and will switch to ON when a NOAA alert message is received.
NOAA Standby
Batteries serve as back-up only. Use 3 pieces
of AA (UM-3) 1.5V batteries. Insert batteries,
matching the polarity. Press RESET after each
IMPORTANT Use the 7.5V AC/DC adaptor
as the main source of power supply.
battery change.
Download from Www.Somanuals.com. All Manuals Search And Download.
