Contents
DVD Changer
Overview ..............................................2
DV-CP706
Connections ......................................18
Getting Started and Setting up ........23
Basic Playback ..................................25
Instruction Manual
Thank you for purchasing an Onkyo DV-CP706
DVD Changer. Read this manual carefully
before using your new DVD Changer. A good
understanding of its features and operation will
allow you to achieve optimum performance and
enjoyment.
Playback Techniques ........................36
Detailed Settings...............................43
Keep this manual for future reference.
Miscellaneous information...............51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal with-
out the permission of the copyright holder.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may
rise, shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject
to vibrations from loudspeakers. Never put the
unit on top of, or directly above a loudspeaker.
• Install this unit horizontally. Never use it on its
side or on a sloping surface, because it may cause
a malfunction.
• If you install this unit near a TV, radio, or VCR,
the picture and sound quality may be affected. If
this occurs, move this unit away from the TV,
radio, or VCR.
2. AC Fuse—The AC fuse inside the unit is not user-
serviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3. Care—Occasionally you should dust the unit all over
with a soft cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild detergent and
water. Dry the unit immediately afterwards with a
clean cloth. Don’t use abrasive cloths, thinners, alco-
hol, or other chemical solvents, because they may
damage the finish or remove the panel lettering.
10. To Obtain a Clear Picture—This unit is a high-
tech, precision device. If the lens on the optical
pickup, or the disc drive mechanism becomes dirty
or worn, the picture quality may be affected. To
maintain the best picture quality, we recommend
regular inspection and maintenance (cleaning or
worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact
your Onkyo dealer for details.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SEC-
TION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
11. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
5. Preventing Hearing Loss
Caution
Moisture may condense on the lens of the optical
pickup, one of the most important parts inside this
unit.
Excessive sound pressure from earphones and head-
• Moisture condensation can occur in the following
phones can cause hearing loss.
situations:
6. Batteries and Heat Exposure
Warning
– The unit is moved from a cold place to a warm
place.
– A heater is turned on, or cold air from an air
conditioner is hitting the unit.
Batteries (battery pack or batteries installed) shall
not be exposed to excessive heat as sunshine, fire or
the like.
– In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
– The unit is used in a humid place.
• Do not use this unit when there’s the possibility
of moisture condensation occurring. Doing so
may damage your discs and certain parts inside
this unit.
If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any con-
densation will have evaporated.
7. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo
dealer.
8. Handling Notes
• If you need to transport this unit, use the original
packaging to pack it how it was when you origi-
nally bought it.
• Do not leave rubber or plastic items on this unit
for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.
• If you do not use this unit for a long time, it may
not work properly the next time you turn it on, so
be sure to use it occasionally.
12. Region Numbers—The DVD standard uses region
numbers to control how discs can be played around
the world, the world being divided into six regions.
This unit will only play DVD discs that match its
region number, which can be found on its rear panel
ALL
1
,
(e.g.,
).
• When you’ve finished using this unit, remove all
discs and turn off the power.
13. About this Manual—This manual explains how to
use all of this unit’s functions. Although the DVD
standard offers many special features, not all discs
use them all, so depending on the disc being played,
this unit may not respond to certain functions. See
the disc’s sleeve notes for supported features.
9. Installing this Unit
• Install this unit in a well-ventilated location.
• Ensure that there’s adequate ventilation all
around this unit, especially if it’s installed in an
audio rack. If the ventilation is inadequate, the
unit may overheat, leading to malfunction.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions—Continued
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit.
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
To prevent being exposed to the laser beam, do not try
to open the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
Modèle pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel.
1. This unit is a CLASS 1
LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV tech-
nician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Camera Angles............................ 40
Introduction ............................................... 6
Controls & Connectors........................... 12
Display ........................................................13
Rear Panel ...................................................14
Display Menu ............................................. 47
Initial Setup Menu ...................................... 49
Language Code List.................................... 50
Connecting the DV-CP706...................... 18
Before Making Any Connections................18
Connecting an AV receiver.........................20
Connecting a Stereo Amp ...........................20
Connecting a Component with an HDMI
Troubleshooting ......................................51
Specifications ..........................................55
Powering Up & Setting Up the
Loading Discs During Playback..................26
Slow-motion Playback ................................33
Adjusting the Display Brightness................33
Using JPEG CDs.........................................34
Using Chain Mode ......................................35
Using Party Mode .......................................35
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Supplied Accessories
Make sure you have the following accessories:
Remote controller (RC-655DV) & 2 batteries (AA/R6)
AV connecting cable (RCA/phono) (1.5 m)
cable (0.8 m)
This cable is used to connect the DV-CP706 to other
-compatible Onkyo components for
Interactive) control.
(Remote
To use
, in addition to an
connection, you must
make an analog audio connection (RCA) between the
DV-CP706 and your Onkyo AV receiver.
Coaxial digital cable (1.0 m)
Power cord
(Power cord varies from country to country.)
In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operation are the
same regardless of color.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
• Fast forward and reverse
DV-CP706 Features
• Repeat playback options include: Chapter, Title, 1
Disc, All Discs, Track, and Folder (MP3/WMA)
• Random playback options include: Title, 1 Disc, All
Discs, and Folder (MP3/WMA)
• Supports up to 8 soundtracks/languages
• Supports up to 32 subtitle languages
Highlights
• HDMI output with 1080p upscaling
*1
*2
• Dolby Digital and DTS Digital Out
• Holds up to six discs
• Chain mode for successive disc playback
• Party mode plays discs in random order
• DVD-Video playback
• Audio CD playback
• MP3/WMA playback with on-screen display
*1.
*3
• JPEG picture display and slideshow (with HD JPEG
resolution via HDMI)
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laborato-
ries.
• CD-R, CD-RW (Audio CD, MP3/WMA/JPEG)
• DVD-R/RW, DVD+R/RW (DVD-Video, MP3/WMA/
JPEG)
*2.
*4
• Vector Linear Shaping Circuitry
Manufactured under license under U.S. Patent #’s: 5,451,942 &
other U.S. and worldwide patents issued & pending. DTS and
DTS Digital Out are registered trademarks and the DTS logos
and Symbol are trademarks of DTS, Inc. All rights reserved.
Video
• 480i video output by advanced scaling devices
• Advanced 108 MHz/14-bit video D/A converter
*3. Windows Media, and the Win-
dows logo are trademarks, or
registered trademarks of
Microsoft Corporation in the
United States and/or other coun-
tries.
*5
• HDMI digital interface
• Component video output
• S-Video and composite video outputs
• Title, chapter, track, or time search
• Last Memory function allows you to resume playback
from a specific point on a DVD-Video disc, even if
that disc has been removed from the DV-CP706
• Supports 4:3 and 16:9 aspect ratio TVs
• View mode (Normal/View mode 1/2/3)
• Multiple camera angle support
*4.
VLSC and the VLSC logo are registered trademarks of Onkyo
Corporation.
*5.
HDMI, the HDMI logo and High-Definition Multimedia Inter-
face are trademarks or registered trademarks of HDMI licens-
ing LLC.
• Parental Lock function
• Screen Saver function
*6
RIHD is a trademark of Onkyo Corporation.
Audio
• Digital/analog isolated circuit layout to reduce digital
noise
• Audiophile-class performance
• Dynamic Range Control setting
• 192 kHz/24-bit D/A converter
• Coaxial digital output
• Optical digital output
• Analog output
Others
*6
• Onkyo RIHD system control
• Ultra-quiet loading mechanism
• Load discs without stopping playback
• Program playback (32 tracks, Title, Chapter)
• Zoom function
• Adjustable display brightness
• Slow motion playback
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
• Don’t use discs with an unusual shape, such as those
shown below, because you may damage the
DV-CP706.
Disc Notes
Supported Discs
The DV-CP706 supports the following discs.
Disc
Logo
Format or file type
*1
DVD-Video
• Don’t use discs that have residue from adhesive tape,
rental discs with peeling labels, or discs with custom-
made labels or stickers. Doing so may damage the
DV-CP706 and you may not be able to remove the
disc properly.
DVD-Video, MP3,
WMA, JPEG
*2
DVD-R
DVD-Video, MP3,
WMA, JPEG
*2
DVD-RW
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official
CD standards. They are special discs and may not play
on the DV-CP706.
*3
PCM
Audio CD
Audio CD, MP3, WMA,
JPEG
*2
CD-R
DVD Region Numbers
The North American DV-CP706 supports only
Region 1 DVD-Video discs bearing this logo.
1
Audio CD, MP3, WMA,
JPEG
*2
CD-RW
TheAustralian DV-CP706 supports only Region
4 DVD-Video discs bearing this logo.
4
JPEG CD
JPEG
– DVD+R/RW –
The DV-CP706 supports DVD+R/RW discs recorded
in the following formats:
If you attempt to play a disc intended for another region,
a message saying that the disc cannot be played appears.
• Discs recorded in DVD-Video mode.
• Discs recorded in ISO 9660 Level 2 or Joliet for-
mat containing MP3, WMA, or JPEG files.
Function Support
The following icons are used throughout this manual to
disc formats and file types.
discs. When set to AUTO, PAL and NTSC video is output as it
is. When set to PAL, only PAL video is output. When set to
NTSC, only NTSC video is output.
Icon
Disc format or file type
DVD
DVD-Video
*2 MP3, WMA, and JPEG files are supported on discs recorded in
ISO 9660 Level 2 or Joliet format. (See “MP3/WMA/JPEG
Compatibility” on page 9 for more details.) However, some
CD-R, CD-RW, DVD-R, and DVD-RW discs may not work
properly for any of the following reasons: incomplete disc
finalization, disc burner characteristics, disc characteristics, the
disc is damaged or dirty, the total size of the data is too small.
See the manual supplied with your disc burner for more infor-
mation. Condensation or dirt on the optical pickup lens can also
affect playback.
CD
Audio CD
MP3 file
MP3
WMA
JPEG
WMA file
JPEG file
*3 Some audio CDs feature copy protection that doesn’t conform
to the official CD standard. Since these are nonstandard discs,
they may not play properly in the DV-CP706.
About this Manual
This manual explains how to use all of the DVD player’s
functions. Although the DVD standard offers many spe-
cial features, not all discs use them all, so depending on
the disc being played, the DVD player may not respond
to certain functions. See your disc’s sleeve notes for sup-
ported features.
• The DV-CP706 supports DVD-R/+R dual layer discs.
• The DV-CP706 does not support disc types not listed.
• The DV-CP706 supports 8 cm and 12 cm discs.
When you attempt to use a DVD feature that is
not available, this logo may appear on-screen,
indicating that the feature is not supported by
the current disc or by the DVD player.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
Disc Content Organization
MP3/WMA/JPEG Compatibility
• The DV-CP706 can play/display MP3, WMA, and
JPEG files recorded on CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R and DVD+RW discs.
• Discs must be in ISO 9660 Level 2 or Joliet format
(folders can be up to eight levels deep). Music files
recorded on discs that use the HFS (hierarchical file
system) cannot be played.
■ DVD-Video Format
DVD-Video discs contain titles, which are usually subdi-
vided into chapters.
Title 1
Chapter 1 Chapter 2
Title 2
Chapter 1 Chapter 2
• Discs must be finalized.
• The DV-CP706 can only recognize the first session on
multisession discs.
DVD-Video
• You can determine the order in which the DV-CP706
plays/displays your MP3/WMA songs and JPEG pic-
tures by prefixing file and folder names with a three-
digit number. For example 001.Root, 002.Folder, and
so on, and 001.Track.mp3, 002.Track.mp3, and so on.
• Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
• The folder numbered “001” appears as “ROOT” in the
Disc Navigator.
■ Audio CD Format
Audio CDs contain tracks.
Track 1
Track 2
Track 3
Track 4
Track 5
Audio CD
• The DV-CP706 supports up to 255 folders and up to
255 files per folder.
• If you try to play an incompatible file, the message
“This format cannot be played” appears on the display.
■ MP3/WMA Files
MP3 andWMA files are typically organized into folders.
The DV-CP706 handles MP3 and WMA files as tracks.
■ MP3
Folder 1
Folder 2
• MP3 files must be MPEG1Audio Layer 3 format, 44.1
or 48 kHz, fixed bit-rate.
Track 1 Track 2
Track 3
Track 1 Track 2
• MP3 files must have a “.mp3” or “.MP3” filename
extension.
• Variable bit-rates (VBR) from 64 kbps to 320 kbps are
supported. (Playing times may display incorrectly
with VBR.)
MP3/WMA
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
■ JPEG Files
■ WMA
JPEG picture files are typically organized into folders.
The DV-CP706 handles JPEG files as tracks.
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported.
• Variable bit-rates (VBR) from 48 kbps to 192 kbps are
supported. (Playing times may display incorrectly
with VBR.)
Folder 1
Folder 2
Track 1 Track 2
Track 3
Track 1 Track 2
• WMA files must have a “.wma” or “.WMA” filename
extension.
JPEG
■ JPEG
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
• JPEG files must have a “.jpg” or “.JPG” filename
extension.
• JPEG files must be less than 5 megabytes in size.
About WMA
WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded
®
by using Windows Media Player version 7, 7.1 or 8.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
Handling Discs
Copyright
• Never touch the underside of a disc.Always hold discs
by the edge, as shown.
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, or rent copyrighted material
without permission.
DVD-Video discs are copy-protected, and any record-
ings made from these discs will be distorted.
This product incorporates copyright protection technol-
ogy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright-protection technology must be autho-
rized by Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless other-
wise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Underside
• Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
• For best results, keep your discs clean. Fingerprints
and dust can affect the sound and picture quality and
should be removed as follows. Using a clean soft
cloth, wipe from the center outwards, as shown. Never
wipe in a circular direction.
✔
• To remove stubborn dust or dirt, wipe the disc with a
damp soft cloth, and then dry it with a dry cloth.
• Never use solvent-based cleaning fluids, such as thin-
ner or benzine, commercially available cleaners, or
antistatic sprays intended for vinyl records, because
they may damage the disc.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or
near heat sources.
• Don’t store discs in places subject to moisture or dust,
such as in a bathroom or near a humidifier.
• Always store discs in their cases and vertically. Stack-
ing, or putting objects on unprotected discs may cause
warping, scratches, or other damage.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
■ HDMI (High Definition Multimedia Interface):
A new connection format that greatly simplifies AV
connections by carrying uncompressed SD or HD
digital video and digital audio all in one cable.
DV-CP706-related Terminology
■ CD-R (Compact Disc Recordable): A type of
CD that can be recorded only once. Can be used to
make audio CDs, or MP3/WMA/JPEG discs.
■ Interlaced scanning: TV pictures are made by
scanning the screen in horizontal lines from top to
bottom. With Interlaced scanning, two scans (fields)
are used to make each picture (frame). Contrast with
Progressive scanning.
■ CD-RW (Compact Disc Rewritable): A type of
CD that can be recorded many times. Can be used to
make audio CDs, MP3/WMA/JPEG discs.
■ Chapter: Titles on DVD-Video discs can be subdi-
vided into chapters.
■ JPEG (Joint Photographic Experts Group):
The compressed file format used to store digital pho-
tos.
■ Component video: A video connection format
that separates the luminance (Y) and color difference
signals (PR, PB), providing better picture quality than
S-Video.
■ LFE (Low-Frequency Effects): The surround-
sound channel used for low-frequency effects.
■ Composite video: A video connection format that
■ Linear PCM: The uncompressed digital audio for-
mat used for audio CDs. PCM stands for Pulse Code
modulation.
mixes the luminance and color signals together.
■ Dolby Digital: The multi-channel digital surround
sound format used on most DVD-Videos.
■ MP3 (MPEG 1 Audio Layer 3): Popular com-
pressed file format for storing digital music.
■ Downmixing: The process of mixing multiple
audio channels into fewer channels. For example, a
surround mix can be downmixed into two channels
for reproduction on stereo systems.
■ MPEG1 (Moving Picture Experts Group 1):
The compressed digital video format used for Video
CDs.
■ Downsampling: The process of reducing the sam-
■ MPEG2 (Moving Picture Experts Group 2):
The compressed digital video format used for
DVD-Videos, offering better picture quality than
MPEG1.
pling rate of digital audio.
■ DTS (Digital Theater System): The surround
format that uses less compression for faithful repro-
duction.
■ NTSC: The color TV system used in the United
States, Japan, Taiwan, and Korea.
■ DVD-R (DVD Recordable): A type of DVD disc
that can be recorded only once. Can be used to make
DVD-Video discs or to store computer data.
■ PAL: The color TV system used in most of Europe,
the United Kingdom, Australia, Brazil, and China.
■ DVD-RW (DVD Rewritable): A type of DVD disc
that can be recorded many times. Can be used to
make DVD-Video discs or to store computer data.
■ Progressive scanning: TV pictures are made by
scanning the screen in horizontal lines from top to
bottom. With progressive scanning, each picture
(frame) is made by scanning the entire screen in one
go, resulting is a clearer and stabler picture. Contrast
with Interlaced scanning.
■ DVD-Video: The format for storing movies on
DVD, with interactive menus, multiple language
soundtracks, subtitles, camera angles, and so on.
■ RIHD (Remote Interactive over HDMI):
Onkyo’s implementation of CEC (Consumer Elec-
tronics Control), which allows integrated system
control over HDMI and is part of the HDMI stan-
dard.
■ Field: In interlaced scanning, a field is a single scan
of the screen. There are two fields per frame.
■ Frame: An individual TV picture is called a frame.
With the NTSC color system there are 30 frames per
second.
■ S-Video: A video connection format that separates
the luminance (Y) and color (C) signals, providing
better picture quality than composite video.
■ HD: Abbreviation for high definition, as in
HDTV(high-definition TV).
■ HDCP (High-bandwidth Digital Content
Protection): The video encryption technology
developed by Intel for HDMI/DVI. It’s designed to
protect video content and requires a HDCP-compati-
ble device to display the encrypted video.
■ Title: Movies on DVD-Video are called titles.
■ WMA (Windows Media Audio): A compressed
file format for storing digital music.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors
Front Panel
A
B
C
D
E
F
G
J
L
H I
K
The page numbers in parentheses show where you can find the main explanation for each item.
A ON/STANDBY button (23)
This button is used to set the DV-CP706 to On or
Standby.
K REPEAT button (36)
This button is used with the Repeat function.
L Display
and double checked all connections.
See “Display” on page 13 for more information.
M Remote control sensor (17)
This sensor receives control signals from the remote
controller.
B STANDBY indicator (23)
This indicator lights up when the DV-CP706 is in
Standby mode.
N Previous [
] button (27, 29, 30, 34)
C Disc tray (25)
This button is used to select the previous chapter or
the current track.
The disc tray has six bays for loading up to six
discs.
D Disc tray light
O Next [
This button is used to select the next chapter or
track.
This light illuminates the disc tray. It comes on
when the DV-CP706 is turned on, and is brighter
while the disc tray is open.
P PARTY MODE button (35)
E DISC SKIP button (25, 26)
This button is used with the Party mode function.
This button is used to select the disc bays (i.e.,
rotate the disc tray) when loading or removing
discs, and to select discs for playback.
Q PAUSE [ ] button (27)
This button is used to pause playback.
R STOP [ ] button (27)
This button is used to stop playback and to cancel
Party mode.
F DISC SELECT 1–6 buttons (26)
These buttons are used to select discs. Playback
starts automatically when a disc is selected with
these buttons.
S PLAY [ ] button (27)
This button is used to start playback and to cancel
fast forward and fast reverse.
G Open/Close [ ] button (24, 25, 26)
This button is used to open and close the disc tray.
H RANDOM button (37)
This button is used with the Random function.
I DIMMER button (33)
This button is used to adjust the display brightness
and turn the disc tray light on or off.
J DISPLAY button (42)
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
Display
1 2 3 4 5 6 7 8 9 0A B C
CHAIN MODE DISC
ALL
DVD
TITLE
CHP TRACK
PRGV LAST
TOTAL REMAIN
1
4
2
5
3
6
CD
CDVD
D
E
F
The page numbers in parentheses show where you can find the main explanation for each item.
1CHAIN MODE, ALL, DVD & CD indicators 9REMAIN indicator
(35)
This indicator appears while the remaining time is
being displayed.
The CHAIN MODE indicator appears when the
Chain mode function is on. The ALL, DVD, and CD
indicators show the type or Chain mode selected.
When Party mode is selected, the CHAIN MODE
and CD indicators appear.
0Camera angle
indicator (40)
played features multiple camera angles.
APlay indicator (27)
2DISC indicator
This indicator is shown during playback.
The number of the currently selected disc appears
here.
BPause indicator (27)
This indicator appears when playback is paused.
3TITLE indicator
CDisc indicators 1–6 (25)
While stopped, the total number of titles on the cur-
rent DVD-Video disc is displayed here. During
playback, the number of the current title is dis-
played.
These indicators show how many discs are loaded.
The number of the current disc has a circle around
it.
When the disc tray is closed, all of the disc indica-
tors appear until the DV-CP706 has checked each
bay for the presence of a disc. If a bay is found to
have no disc, the corresponding indicator disap-
pears.
4CHP indicator
This indicator appears while the number of the cur-
rent chapter is being displayed.
5TRACK indicator
This indicator appears while track numbers are
being displayed. While stopped, the total number of
tracks on the current audio CD, or MP3/WMA disc
are displayed. During playback, the number of the
current track is displayed.
DChapter & track number
Chapter and track numbers appears here.
ETime display
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
6PRGV indicator
This indicator appears when the component video
output is outputting progressive video. While the
indicator is shown, nothing is output by the other
video outputs.
FCDVD indicator
This indicator shows the type of disc currently
selected:
DVD: DVD-Video, DVD-R, DVD-RW, DVD+R, or
7LAST indicator (39)
DVD+RW
This indicator appears when the Last Memory func-
tion has been set.
CD: Audio CD, MP3/WMA/JPEG CD-R, or
CD-RW
8TOTAL indicator
This indicator appears while the total time is being
displayed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
Rear Panel
1
2
34 5 6 7
8
9
A ANALOG AUDIO OUTPUT
These RCA/phono connectors can be connected to
analog audio inputs on a hi-fi amp, or AV receiver.
B
REMOTE CONTROL
These (Remote Interactive) connectors can be
connected to the
connectors on your other
Onkyo AV components for interactive control.
If you’re using RIHD, do not connect anything to
these connectors.
C OPTICAL AUDIO OUTPUT
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D COAXIAL AUDIO OUTPUT
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
E HDMI OUT
This HDMI jack outputs digital video and audio and
can be connected to an HDMI input on a compatible
TV or other component.
F VIDEO OUTPUT
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
G S VIDEO OUTPUT
This connector can be used to connect a TV or pro-
jector with an S-Video input.
H COMPONENT VIDEO OUTPUT
These RCA/phono connectors can be used to con-
nect a TV or projector with component video inputs.
I AC INLET
The supplied power cord connects to this polarized
connected to a suitable wall outlet. On the Austra-
lian model, the power cord is not polarized.
See page 19–22 for connection information.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
Remote Controller
The page numbers in parentheses show where you can
find the main explanation for each item.
A ON button (23)
Don’t turn on the DV-CP706 until you’ve com-
pleted, and double checked all connections.
P
1
2
B STANDBY button (23)
Q
R
S
T
U
This button is used to set the DV-CP706 to Standby.
C Number buttons (30, 31, 38, 48)
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating spe-
cific points in time.
3
To enter a single-digit number, simply press the cor-
responding button. To enter a double-digit number,
enter the numbers in order from left-to-right (e.g., to
enter 14, press [1] then [4].
The [+10] button is used to enter multiples of ten
(i.e., 10, 20, 30, and so on). For example, to enter
the number 25, press the [+10] button twice fol-
lowed by the [5] button.
V
Z
W
X
Y
4
5
6
7
D AUDIO button (28, 40)
soundtracks and audio formats (e.g., Dolby Digital
or DTS).
a
b
c
8
9
J
E SUBTITLE button (28, 40)
This button is used to select subtitles.
F RANDOM button (37)
K
d
This button is used with the Random Playback func-
tion.
G SLOW [ ]/[ ] buttons (33)
These buttons are used for slow motion playback.
e
L
H Previous [
] button (27, 29, 30, 34)
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current track.
f
g
M
N
O
I Play [ ] button (27)
This button is used to start playback.
This button is used to start fast reverse.
These buttons are used to navigate DVD-Video
menus and the on-screen setup menus.
L TOP MENU button (28, 34)
This button is used to select the top menu.
M MENU button (28, 34)
This button is used to select the menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
N ASPECT/ZOOM button (41, 45)
This button is used to change the view mode. Press-
ing and holding it for a few seconds selects Zoom
mode.
f RETURN button (44)
This button is used to return to the previous screen.
g CHAIN MODE button (35)
This button is used with the Chain mode function.
O RESOLUTION button (24)
This button is used to set the video resolution of the
HDMI OUT, and to turn the HDMI OUT on or off.
P OPEN/CLOSE [ ] button (25, 26)
This button is used to open and close the disc tray.
Q DISC SKIP [+]/[–] button (25, 26)
This button is used to select the disc bays (i.e.,
rotate the disc tray) when loading or removing
discs, and to select discs for playback.
R SEARCH button (30, 31)
This button is used to search for titles, chapters,
tracks, and specific points in time.
S MEMORY button (38)
This button is used with the Memory Playback
function.
T REPEAT button (36)
This button is used to set the Repeat Playback func-
tions.
U A–B button (37)
This button is used to set the A–B Repeat Playback
function.
V CLR button (39, 48)
This button is used to cancel various functions.
W DISPLAY button (42)
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
X ANGLE button (40)
This button is used to select different camera angles.
Y LAST MEMORY button (39)
This button is used with the Last Memory function.
Z Pause [ ] button (27, 32)
This button is used to pause playback. For DVDs,
pressing this button while playback is paused moves
the video forward one frame at a time.
a Next [
] button (27, 29, 30, 34)
This button is used to select the next chapter or
track.
b Stop [ ] button (27)
This button is used to stop playback.
c Fast Forward [ ] button (32)
This button is used to start fast forward.
d ENTER button (44)
This button is used to start playback of the selected
title chapter, or track and to confirm settings.
e SETUP button (44)
This button is used to open and close the on-screen
setup menus.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the DV-CP706
Installing the Remote Controller’s
Batteries
Using the Remote Controller
To use the remote controller, point it at the DV-CP706’s
remote control sensor, as shown below.
Open the battery compartment, as
shown.
1
Remote control sensor
DV-CP706
30˚
30˚
Insert the two supplied batteries (AA/
R6) in accordance with the polarity dia-
gram inside the battery compartment.
2
Notes:
• The remote controller may not work reliably if the
DV-CP706 is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing the DV-CP706.
• If another remote controller of the same type is used in
the same room, or the DV-CP706 is installed close to
equipment that uses infrared rays, the remote control-
ler may not work reliably.
Close the battery compartment.
3
• Don’t put anything, such as a book, on the remote con-
troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.
• The remote controller may not work reliably if the
DV-CP706 is installed in a rack behind colored glass
doors. Keep this in mind when installing the
DV-CP706.
• The remote controller will not work if there’s an obsta-
cle between it and the DV-CP706’s remote control
sensor.
Notes:
• If the remote controller doesn’t work reliably, try
replacing both batteries.
• Don’t mix new and old batteries, or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage
and corrosion.
• Flat batteries should be removed as soon as possible to
prevent possible leakage and corrosion.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP706
This chapter explains how to connect the DV-CP706 to
your other AV components.
RCA/phono AV Connection Color Coding
RCA/phono AV connections are usually color coded:
red, white, and yellow. Use red plugs to connect right-
channel audio inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio inputs and
outputs (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
Before Making Any Connections
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed
all audio and video connections.
Analog audio
Right (red)
Left (white)
Right (red)
Left (white)
Optical Digital Jack
The DV-CP706’s optical digital jack has shutter-type
cover that open when an optical plug is inserted and
close when it’s removed. Push plugs in all the way.
Composite video
(Yellow)
(Yellow)
• Push the plugs in all the way
to make a good connection.
• To prevent interference, keep
audio and video cables away
from power cords and speaker
cables.
Caution: To prevent shutter damage, hold the optical
plug straight when inserting and removing.
Right!
Wrong!
AV Cables & Connectors
HDMI connections can carry uncom-
pressed, standard or high definition digital
video and digital audio, for the best picture
and sound quality.
HDMI
Video
Component video separates the luminance
(Y) and color difference signals (PR, PB),
providing the best picture quality. (Some
TV manufacturers label their component
video inputs slightly differently.)
Y
Y
P
B
PB
Component
video
P
R
PR
S-Video provides better picture quality
than composite video.
S-Video
Composite video can be found on virtually
all TVs, VCRs, and other video equipment.
Use only dedicated composite video cables.
Composite
video
Audio
Optical digital audio connections with the
optical digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos
with surround sound.
Optical digital
Coaxial digital
Coaxial digital audio connections with the
coaxial digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos
with surround sound.
RCA/phono analog audio connectors can
be found on virtually all AV components.
Analog
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ConnectingYour TV or Projector
your TV or projector. See page 21 for connecting a TV
or projector that supports HDMI.
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
In this hookup example, the TV handles the audio and
need a compatible decoder (see page 20).
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETSARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
The DV-CP706 has four types of video output: HDMI,
component video, S-Video, and composite video.
HDMI offers the best picture quality, so if your TV sup-
ports it, see page 21. Component video offers the next
best picture quality, so if your TV supports it, use a com-
mercially available component video cable to connect
the DV-CP706’s COMPONENT VIDEO OUTPUT to
the component video input on your TV. If your TV sup-
ports progressive scanning, you must use component
video in order to take advantage of that feature. S-Video
offers better picture quality than composite video, so if
your TV supports it, use the S-Video cable to connect the
DV-CP706’s SVIDEO OUTPUT to an S-Video input on
your TV. Failing that, use the supplied composite video
cable to connect the DV-CP706’s VIDEO OUTPUT to a
composite video input on your TV.
(red)
S-Video cable
Component
video cable
(white)
(yellow)
Only one connection
required! Choose
component video,
S-Video, or
AV RCA/phono
cable (supplied)
Y
PB
IN
PR
composite video.
S VIDEO IN
(red)
(white)
(yellow)
TV or projector
VIDEO IN
L
R
ANALOG
INPUT
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP706—Continued
Digital Connection
page 45), the DV-CP706 cannot output progres-
sive video. To output progressive video, you must
set the HDMI Output setting to Off (see page 45),
and set the Progressive setting to Progressive (see
page 45).
• When the Progressive setting is set to Progressive
so that progressive video is output by the COM-
PONENT VIDEO OUTPUT, and the PRGV indi-
cator is shown, nothing is output by the VIDEO
(composite video) and S VIDEO (S-Video) out-
puts. To output video from these outputs, you
must set the Progressive setting to Interlaced (see
page 45).
To enjoy Dolby Digital or DTS surround sound, you
need to connect one of the DV-CP706 digital audio out-
puts to the digital input on a Dolby Digital or DTS
decoder or an AV receiver with built-in decoders.
Use an optical (or coaxial) digital audio cable to connect
the DV-CP706’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your AV receiver, as shown.
• The Progressive can also be changed by pressing
and holding the Previous [
pressing [ON/STANDBY] button.
] button, and then
Optical
digital
cable
COAXIAL
OPTICAL
Coaxial
digital
cable
(supplied)
Notes:
Connect one or
the other
OPTICAL
• Before making any connections, turn off the
DV-CP706 and your TV and disconnect their power
cords from the wall outlets.
COA
XIAL
• Also refer to the connection information supplied with
your TV.
Signal flow
• Connect the DV-CP706’s video outputs directly to
your TV. Don’t connect a VCR or other video equip-
ment in between your DV-CP706 and TV. Doing so
may result in picture distortion, because of the copy
protection system used on DVD-Video discs.
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
AV component with
Dolby Digital/DTS decoder
Notes:
• Make sure that the Digital/HDMI Audio Out setting
on the Audio menu is set to All (see page 46). Other-
wise, you won’t get surround sound.
• Also refer to the connection information supplied with
your AV receiver or decoder.
• When playing Dolby Digital or DTS source material,
be sure to select Dolby Digital or DTS decoding,
respectively, on your AV receiver or decoder. See the
relevant manuals.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
Connecting an AV receiver
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP706’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your AV receiver, as shown.
Signal flow
L
Connecting a Stereo Amp
R
ANALOG
INPUT
This section explains how to connect the DV-CP706 to a
stereo amp for better sound quality than that of most
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP706. DVD-Video discs will
sound better too.
(white)
(white)
(red)
RCA/phono cable
(red)
AUDIO
OUTPUT
ANALOG
L
R
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP706—Continued
converted and output as PCM. DTS signals will not be
output at all.
• Never connect the DV-CP706 to the AC-3RF input on
a Dolby Digital receiver. The AC-3RF format is not
supported by the DV-CP706.
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP706’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your stereo amp, as shown.
Signal flow
L
Connecting a Component with an
HDMI Input
R
ANALOG
INPUT
This section shows how to connect the DV-CP706 to an
AV receiver, HDTV, or projector with an HDMI input.
(white)
(white)
(red)
RCA/phono cable
What is HDMI?
HDMI (High Definition Multimedia Interface) is a new
connection format that can carry uncompressed, stan-
dard or high definition digital video and up to eight chan-
nels of digital audio. Until now, several separate video
and audio cables have been required to connect AV com-
ponents together. With HDMI, a single cable is all that’s
necessary to achieve the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual
Interface). To send HDMI video to a DVI input requires
an HDMI-to-DVI cable. The DV-CP706 supports HDCP
(High-bandwidth Digital Content Protection), and for an
HDMI-to-DVI connection to work, the other component
must also support it. Note that this may not work with
some DVI components.
(red)
AUDIO
OUTPUT
ANALOG
L
R
Note:
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
Digital Connection
Using HDMI
Use an optical (or coaxial) digital audio cable to connect
the DV-CP706’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your stereo amp, as shown.
Use the HDMI cable to connect the DV-CP706’s HDMI
OUT to an HDMI input on your AV receiver. Alterna-
tively, you can connect the DV-CP706 directly to the
HDMI input on your TV.
Signal flow
OPTICAL
COA
XIAL
Connect one or the other
OPTICAL
Coaxial
digital
COAXIAL
Signal flow
cable
(supplied)
Optical
digital cable
HDMI cable
HDMI
IN
HDTV,
projector
or
AV receiver
HDMI
IN
Notes:
• Be sure to set the Audio menu, Digital/HDMI Audio
Out setting to “PCM” (see page 46). Otherwise an
unpleasant digital noise may be heard, which may
damage your equipment.
HDMI
HDMI
IN
HDTV,
projector
• When the Audio menu, Digital/HDMI Audio Out set-
ting is set to “PCM,” Dolby Digital signals will be
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP706—Continued
Notes:
Connecting
Components
-compatible
• The DV-CP706 supports HDCP (High-bandwidth
Digital Content Protection), a protection system for
digital video. HDMI components that you connect to
the DV-CP706 must also support HDCP.
• The DV-CP706 supports HDMI (High-Definition
Multimedia Interface) Specification Information Ver-
sion 1.0.
AV receiver
IN
HDMI & the DV-CP706
L
REMOTE
CONTROL
■ Video
R
The DV-CP706’s HDMI OUT supports the following
video resolutions:
AUDIO
OUTPUT
ANALOG
• 720 x 480i 60 Hz
• 720 x 480p 60 Hz
L
• 720 x 576i 50 Hz (Australian model only)
• 720 x 576p 50 Hz (Australian model only)
• 1280 x 720p 50/60 Hz
R
• 1920 x 1080i 50/60 Hz
If the connected HDTV or projector doesn’t support a
resolution, you may get no picture.
On the DV-CP706, you can select a resolution suitable
for use with the connected HDTV or projector (see
page 24).
• The remote controller supplied with Onkyo AV
receiver or amplifiers can be used to control the
DV-CP706.
■ Audio Formats
The DV-CP706’s HDMI OUT supports the following
audio formats:
• Dolby Digital
• The function of the upper and lower
the same. Connect to either one.
connectors are
• Connecting an
cable only does not make the sys-
tem operational. You must also connect the audio
cables as well.
• For remote control operation, you must make an ana-
log RCA connection between your DV-CP706 and the
other AV component, even if they are connected digi-
tally.
• DTS
If your TV only supports HDMI digital audio up to
48 kHz, change the Linear PCM Out setting to Down
Sample On (see page 46).
If your TV doesn’t support Dolby Digital, set the Digital/
HDMI Audio Out setting to PCM (see page 46).
If your TV doesn’t support DTS, the DV-CP706 will not
be able to play DTS format audio or soundtracks. In this
case, on your DVD-Video disc’s audio setup menu,
select an audio format other than DTS.
• If you’re using RIHD, do not connect anything to the
RI connectors.
RIHD (CEC)
The DV-CP706 supports RIHD (Remote Interactive over
HDMI), which is Onkyo’s implementation of CEC
(Consumer Electronics Control), which allows inte-
grated system control over HDMI and is part of the
HDMI standard. In addition to OnkyoAV components, it
allows interoperability with CEC-compatible AV com-
ponents and TVs made by other manufacturers.
To use RIHD, make sure that CEC is turned on on your
other components (e.g., TV, AV receiver)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Up & Setting Up the DV-CP706
To turn on the DV-CP706, press
the [ON/STANDBY] button (or the
remote controller’s [ON] button).
The DV-CP706 comes on, the display
lights up, and the STANDBY indicator
goes off.
ON/STANDBY
3
To turn off the DV-CP706, press the
[ON/STANDBY] button (or the remote
controller’s [STANDBY] button). The
DV-CP706 enters Standby mode and
the STANDBY indicator comes on.
Remote controller
STANDBY indicator
ON
STANDBY
First Time Setup
The very first time you turn on your DV-CP706, the Ini-
tial Setup menu appears on-screen, as shown.
Initial Setup
TV Shape
4:3 Letter box
HDMI Output Setting
4:3 Pan Scan
On-Screen Language
ENTER
16:9 Widescreen
√ 16:9 Compressed
Here you need to specify the size of your TV (standard
4:3 or widescreen 16:9), specify a HDMI output setting,
and select a language for the on-screen setup menus.You
can change these settings later by using the on-screen
setup menus (see page 43).
Powering Up the DV-CP706
Before connecting the power cord, connect all your AV
components (see page 18 to page 22).
Don’t forget to turn on your TV or projector and select
the video input to which the DV-CP706 is connected.
If you’re using a hi-fi amp, AV receiver, or surround
sound decoder for audio playback, turn that on as well
and select the audio input to which the DV-CP706 is
connected.
Use the remote controller’s Up/
Down [ ]/[ ] buttons to select aTV
shape, and then press [ENTER].
1
Remote controller
See page 44 for more information on
the TV Shape options.
Connect the supplied power cord
to the DV-CP706’s AC INLET.
The HDMI Output Setting menu
appears.
1
Plug the other end of the power
Select a HDMI Output Setting
option, and then press [ENTER].
See page 45 for more information on
the HDMI output options.
The On-Screen Language menu
appears.
2
2
cord into a suitable wall outlet.
The DV-CP706 enters Standby mode,
and the STANDBY indicator comes on.
When you disconnect the power cord,
always disconnect it from the wall out-
let first, and then the DV-CP706’s AC
INLET.
Remote controller
Select a language, and then
press [ENTER].
3
Remote controller
See page 47 for more information on
the language options.
The Initial Setup menu closes.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Up & Setting Up the DV-CP706—Continued
Your DV-CP706 is now ready for use. See page 25 for
information on loading discs, and page 26 for informa-
While “HDMI ON” is displayed,
2
press the [RESOLUTION] button
on the remote controller repeat-
edly to change the HDMI resolu-
tion.
The fist button press displays the cur-
rent resolution on-screen. Press the but-
ton again while the resolution is
displayed to change the setting. The
DV-CP706 supports the following res-
olutions:
Remote controller
Notes:
• You can cancel the Initial Setup by pressing the
OPEN/CLOSE [ ] button, and complete the settings
later by using the on-screen setup menus (see
page 49).
• You can change the language of the on-screen setup
menus, and your preferred languages for DVD menus,
foreign language soundtracks, and subtitles individu-
ally on the Language page of the on-screen setup
menus (see page 47).
Auto:
The resolution is automatically set
to the native resolution of the TV
connected to the HDMI OUT.
480p(480p/576p):
• Depending on the connected CEC-compatible TV,
some of the DV-CP706’s settings may change when
RIHD is on.
• Not all DVD-Video discs have multi-language menus,
foreign language soundtracks, and subtitles. In such
cases, the disc’s default language is used.
The setting displayed depends on
the country in which you purchased
the DV-CP706.
720 × 480p 60Hz or 720 × 576p
50Hz
480i(480i/576i):
The setting displayed depends on
the country in which you purchased
the DV-CP706.
720 × 480i 60Hz or 720 × 576i
50Hz
720p:
1280 × 720p 50/60Hz
1080i:
1920 × 1080i 50/60Hz
1080p:
1920 × 1080p 50/60Hz
RESOLUTION
Tip:
These settings can also be changed by using the on-
screen setup menus (see page 45).
Note:
• Depending on your setup, you may find that there’s no
picture when you turn on HDMI. In this case, you
need to check the HDMI resolution setting and your
TV’s settings. If there is no picture, press the [RESO-
LUTION] button repeatedly until the picture reap-
pears.
Setting the HDMI
This section explains how to turn HDMI on and off and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
Press the [RESOLUTION] button
to turn HDMI on or off.
1
If HDMI is off, “HDMI OFF” appears
on the display the first time the button is
pressed. Press the button again while
“HDMI OFF” is displayed to turn on
HDMI.
To turn off HDMI, press and hold the
[RESOLUTION] button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
DISC
SELECT
4
DISC SKIP
See page 26 for information on select-
ing and playing discs.
Remote controller
PLAY
Tip: If you press the Play [ ] button,
the disc tray will close and playback of
the disc in the right bay will start auto-
matically. If there is no disc in that bay,
the DV-CP706 will check the other
bays and play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
OPEN/
CLOSE
DISC SKIP
Notes:
• You can load up to six discs.You don’t have to load all
six discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DV-CP706 has checked each bay for
the presence of a disc. If a bay is found to have no disc,
the corresponding indicator disappears.
• The disc tray can be opened and closed even while the
DV-CP706 is in Standby mode, so you don’t have to
turn it on to load or remove your discs. (The disc tray
may take several seconds to open.)
• The DV-CP706 supports 8 cm and 12 cm discs. To
avoid damaging your discs or DV-CP706, always
place discs in the center of the disc bays.
Loading & Removing Discs
DVD
CD
MP3
WMA
JPEG
This section explains how to load and remove discs.
• Only load discs that are supported by the DV-CP706
(see page 8). Don’t load cartridge-type discs.
• To avoid personal injury, keep your hands away from
the disc tray as it closes.
• Always use the OPEN/CLOSE [ ] button to open
and close the disc tray. Never push the disc tray, and
don’t touch it, or obstruct it while it’s opening or clos-
ing. Don’t press down on the disc tray while it’s open,
and don’t load anything other than supported discs.
Doing so may damage your discs or DV-CP706.
Press the OPEN/CLOSE [
button.
]
1
The disc tray opens and the six disc
number indicators appear on the dis-
play. A circle appears around the num-
ber of the disc bay on the right.
Remote controller
Place a disc, label side up, into
each bay.
2
3
Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise
two bays at a time.
Remote controller
Press the remote controller’s DISC
SKIP [+] button to turn the disc tray
counterclockwise. Press the DISC
SKIP [–] button to turn it clockwise.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Selecting Discs
DISC
SELECT
DISC SKIP
DVD
CD
MP3
WMA
JPEG
The section explains how to select loaded discs.
Use the DISC SELECT buttons to
select loaded discs.
On the display, the number of the cur-
What happens next depends on the type
of disc you selected, as follows:
DVD-Video:
OPEN/
CLOSE
Typically a menu appears on-
screen. See page 28.
DISC SKIP
Audio CD:
Playback starts automatically.
MP3/WMA/JPEG:
Playback starts automatically.
Note:
• Disc contains different types of
autoamtically.
Loading Discs During Playback
DVD
CD
MP3
WMA
JPEG
Notes:
This section explains how to load and remove discs with-
out stopping playback.
• The type of disc currently selected is shown on the dis-
play: DVD, or CD (see page 13).
Press the OPEN/CLOSE [
button.
]
• You can select discs while the DV-CP706 is stopped
or during playback.
1
The disc tray opens.
The disc that’s currently playing
remains inside the DV-CP706 and its
disc bay is empty and won’t come to the
front. To remove this disc you must
stop playback before pressing the
OPEN/CLOSE [ ] button.
• You can use the [DISC SKIP] button to skip the cur-
rent disc and start the next disc. If disc #6 is the current
disc, disc #1 will be selected next.
Remote controller
Load or remove discs as
required, and press the [DISC
SKIP] button to access the other
disc bays.
2
Remote controller
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
3
Playback of the current disc continues
uninterrupted until you either stop
playback or select another disc.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close, playback of the current disc will
stop, and playback of the newly
selected disc will start automatically.
Remote controller
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
■ Pause
To pause playback, press the
Pause [ ] button.
STOP
Playback pauses and the Pause indi-
cator appears on the display.
To resume playback, press the Play [
button.
]
Remote controller
Playback resumes and the Pause
indicator disappears.
PAUSE
PLAY
■ Stop
Remote controller
Notes:
To stop playback, press the Stop
[ ] button.
Playback stops and the Play indica-
tor disappears.
• During playback, you can select chapters or tracks by
using the Next [ ] and Previous [ ] buttons.
ENTER
• When you stop playback of a DVD-Video disc, the
DV-CP706 remembers the point at which playback
was stopped. To resume playback from that point,
tion, press the Stop [ ] button again. The Resume
function is reset when another disc is selected.
• With the Last Memory function you can resume play-
back from a specific point even if the disc has been
removed (see page 39).
• Do not move the DV-CP706 or subject it to vibration
during playback. Doing so may damage your discs or
DV-CP706.
Starting, Pausing & Stopping
Playback
• Prolonged display of the same picture or menu may
cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t keep playback
paused for too long and always press the Stop [ ] but-
ton when you’ve finished playing a DVD-Video disc.
Your DV-CP706 features a screen saver to protect
your TV from the effects of burn-in (see page 47).
DVD
This section explains how to start, pause, and stop play-
back.
■ Start
To start playback, press the Play
] button.
Playback starts and the Play indica-
tor appears on the display.
If the disc is a DVD-Video, you may
need to start playback from a menu (see
page 28).
[
With some DVD-Video discs, you may experience pic-
ture noise that is not normally visible with regular TV
broadcasts. This is usually because DVD-Video discs
uses a lot of high-resolution video data. The amount of
noise, if any, will depend on your particular TV and the
problem can sometimes be alleviated by turning down
your TV’s sharpness control.
Remote controller
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Notes:
• Not all DVD-Video discs have menus.
• Menu operation varies from disc-to-disc. See the
disc’s sleeve notes for details.
• On some DVD-Video discs, options such as foreign
language soundtracks, subtitles, and audio formats
appear on a separate menu called the disc menu, and
titles and chapters appear on what’s called the title
menu. To display the disc menu, press the [MENU]
button.
and audio formats can usually be selected during play-
back by using the remote controller’s [AUDIO] button
(see page 40). Similarly, subtitles can be selected by
using the remote controller’s [SUBTITLE] button (see
page 40).
AUDIO
SUBTITLE
ENTER
STOP
TOP MENU
MENU
PLAY
Navigating Disc Menus
DVD
DVD-Video discs usually have an on-screen menu from
which you can select titles, chapters, and other options,
audio formats (e.g., Dolby Digital or DTS).
Load and select a DVD-Video
disc.
1
See page 25 and page 26.
With DVD-Video discs, a menu usually
appears automatically. If it doesn’t, try
pressing the [TOP MENU] button.
Use the remote controller’s navi-
gation [ ], [ ], [ ], [ ] buttons to
select items on the menu, and
2
Remote controller
ENTER
use the [ENTER] button to con-
firm your selection.
If you select a playback option (e.g.,
subtitles), another menu of options will
typically appear, in which case you use
the remote controller’s navigation but-
tons to select items and the [ENTER]
button to confirm your choice.
TOP MENU
RETURN
MENU
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Press the Previous [
restart the current track. Press it again
to select earlier tracks.
] button to
Using the Disc Navigation Window
CD
MP3
WMA
JPEG
Alternatively, the number button is
used to select a track.
On the disc navigation window, you can select CD tracks
or MP3, WMA, or JPEG files.
For MP3, WMA, and JPEG discs:
To open a folder, use the remote con-
troller’s Up/Down [ ]/[ ] buttons to
select it, and then press [ENTER].
Use the Up/Down [ ]/[ ] buttons to
select tracks in the open folder.
Load and select an audio CD or
MP3, WMA, or JPEG disc.
See page 25 and page 26.
The disc navigation window appears.
It may take a while to read the contents
of discs that contain many files and
folders.
For JPEG discs, press the [MENU] but-
ton to open the disc navigation window.
1
You can select the next or previous
track during playback by using the
Next [
] and Previous [
] buttons.
Press the Previous [
restart the current track. Press it again
to select earlier tracks.
] button to
This is the display for an MP3 disc.
1
2
Use the Left/Right [ ]/[ ] buttons to
select other folders.
Play
1/10
Disc
4: DATA
00:00:24
1/8
00:05:06
00:05:30
/MP3 music
001. ROOT
To close a folder (i.e., move back up the
directory tree), press the [RETURN]
button.
When all the tracks in that folder have
been played, tracks in the next folder
are played.
Repeat
Ramdom
: Off
: Off
3
002. MP3 music
003. Onkyo 1
004. Onkyo 2
001. Track01
002. Track02
003. Track03
004. Track04
M
M
M
M
P
3
P
3
4
5
P
3
P
3
Name: Onkyo Title
Artist Name: Onkyo Artist
If the disc contains MP3/WMA files
played in order. JPEG files will be dis-
played in a slideshow. Press the
[TOP MENU] button to display the
first nine pictures at thumbnail-size
(see page 34). Depending on the disc,
the first nine pictures may be displayed
automatically.
A Folder number and file number.
B Elapsed time, remaining time, and
total time of currently playing
song. (Only elapsed time is shown
for WMA files.) (See also page 42.)
C Repeat function and Random
function status.
D For JPEG files, a preview and the
file size are displayed here.
Press the Stop [ ] button to stop
playback.
3
E Information about the song
currently playing (e.g., song title,
artist name, album name) is
displayed here, if available.
Remote controller
Press the Play [ ] button to start play-
back. Press the Stop [ ] button to stop
playback. Press the Pause [ ] button to
pause playback and the Play [ ] button
to resume it.
2
Remote controller
Notes:
• You can use the Random Playback function to play a
random selection of MP3/WMA files (page 37).
• During random playback, memory playback, or party
mode playback, the remote controller’s navigation
[ ], [ ], [ ], [ ] buttons, OPEN/CLOSE [ ] button,
and DISC SKIP [+]/[–] buttons cannot be used with
the disc navigation window.
For audio CDs:
Use the Up/Down [ ]/[ ] buttons to
select a track, and press the Play [
]
button (or [ENTER]) to start playback.
You can select the next or previous
track during playback by using the
• Depending on their size and format, some JPEG files
cannot be displayed.
Next [
] and Previous [
] buttons.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Use the number buttons to spec-
ify a chapter or title.
To enter, for example, “2,” press the [2]
button.
PLAY
3
Remote controller
Step
1: DVD
Search
Disc
Disc
Title
Chapter
1:DVD-VIDEO Current/Total 2/
3
Current/Total 2/ 22
To enter, for example, “12,” press the
[1] button, followed by the [2] button.
SEARCH
CLR
Step
1: DVD
Search
Disc
Number
buttons
Disc
Title
Chapter
1:DVD-VIDEO Current/Total 2/
3
Current/Total 12
/
22
To clear the number, press the [CLR]
button.
Use the Left/Right [ ]/[ ] buttons to
toggle between Title and Chapter or
Folder and Track.
Press the Play [ ] or [ENTER]
button to start playback of the
specified chapter or title.
4
During playback, you can select other
Remote controller
ENTER
chapters by using the Next [
Previous [ ] buttons.
] and
SelectingTitles,Chapters &Tracks by
Number
DVD
CD
MP3
WMA
Notes:
• You can also select chapters by using the number but-
tons, without opening the Search window.
you won’t be able to select other titles. Similarly, if it
contains no chapters, you won’t be able to select chap-
ters.
• DVD-Video discs usually have on-screen menus for
selecting titles and chapters (see page 28).
• With some discs you may not be able to select titles
and chapters as described here.
This section explains how to select titles, chapters, and
tracks by number.
Load and select a disc.
See page 25 and page 26.
1
Press the [SEARCH] button.
The Search window appears on-screen,
as shown.
2
Remote controller
This is the display for a DVD-Video
disc.
Step
1: DVD
Search
Disc
Disc
Title
Chapter
1:DVD-VIDEO Current/Total 2/
3
Current/Total 4/ 22
With some DVD-Video discs, you can
select only titles, and the Chapter Cur-
rent/Total information is not displayed.
Some discs won’t allow you to select
titles.
For audio CDs, you can select tracks.
For MP3 and WMA discs, you can
select tracks and folders.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Use the number buttons to enter
a time.
To enter, for example, 1 hour, 25 min-
utes, 30 seconds, press the [1], [2], [5],
[3], and [0] buttons.
2
PLAY
Remote controller
Search
Disc
Title
1 : 25 : 30
1: DVD-VIDEO
To enter, for example, 2 minutes, 15
seconds, press the [2], [1], and [5] but-
tons.
Search
Disc
Title
0 : 02 : 15
1: DVD-VIDEO
SEARCH
Number
buttons
Press the Play [ ] button to
locate the specified point.
Playback starts from the specified
point.
3
Remote controller
Notes:
• The Time Search function works only within the cur-
rently playing title (DVD-Video) or track (audio CD).
For example, if the current title is one hour long and
you enter the time 1 hour, 30 minutes, nothing will
happen.
Locating Specific Points in Time
• In some cases, playback may start from a slightly dif-
ferent point to the one you specified.
DVD
CD
• Time Search may not work with some discs.
• You can’t use the [SEARCH] button during random
playback, memory playback, or party mode playback.
With the Time Search function you can locate specific
points in time.
Press the [SEARCH] button
twice.
1
Remote controller
The Search window appears on-screen,
as shown.
Search
Disc
Title
-- : -- : --
1: DVD-VIDEO
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
■ Fast
reverse
During playback, press the Fast
Reverse [ ] button to start fast
reverse.
PLAY
Remote controller
Playback reverses and “x 2” appears
on-screen.
To change the fast-reverse speed, press
the Fast Reverse [ ] button repeat-
edly to select: x 2, x 4, x 8, or x 16.
PAUSE
Remote controller
To resume normal playback,
press the Play [ ] button.
SEARCH
Number
buttons
Note:
• No sound is output during fast forward or fast reverse
of a DVD-Video, MP3, or WMA disc.
Frame-by-Frame Playback
DVD
With the Frame-by-Frame Playback function, you can
forward playback one frame at a time.
Press the Pause [ ] button to
pause playback, and then press
the Pause [ ] button repeatedly
1
Remote controller
to forward playback one frame at
a time.
To resume normal playback,
press the Play [ ] button.
2
Remote controller
Fast Forward & Reverse
DVD
CD
MP3
WMA
Notes:
• No sound is output during frame-by-frame playback.
cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t display the same
frame for too long. Your DV-CP706 features a screen
saver to protect your TV from the effects of burn-in
(page 47).
The section explains how to fast forward and reverse.
■ Fast During playback, press the Fast
forward Forward [ ] button to start fast
forward.
Remote controller
Playback fast forwards and “x 2”
appears on-screen.
To change the fast-forward speed, press
the Fast Forward [ ] button repeat-
edly to select: x 2, x 4, x 8, or x 16.
Remote controller
To resume normal playback,
press the Play [ ] button.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Slow-motion Playback
DVD
With the Slow-motion Playback function you can watch
a scene slowly either forward or backward.
■ Forward During playback, press the
slow
motion
SLOW [ ] button.
DIMMER
Forward slow-motion playback starts
and “ 1/2” appears on-screen.
To change the slow-motion speed, press
the SLOW Forward [ ] button repeat-
edly to select: 1/2, 1/4, 1/6, or 1/8.
Remote controller
Adjusting the Display Brightness
You can adjust the brightness of the display as follows.
■ Backward During playback, press the
slow
motion
SLOW [ ] button.
Press the [DIMMER] button
repeatedly to cycle through the
following options:
Disc tray light off + normal brightness
Disc tray light off + dim
Disc tray light off + dimmer
1
Backward slow-motion playback starts
and “ 1/2” appears on-screen.
To change the slow-motion speed, press
the SLOW Back [ ] button repeatedly
to select: 1/2, 1/4, 1/6, or 1/8.
Remote controller
Disc tray light on + normal brightness
■ Resume To resume normal playback,
playback press the Play [ ] button.
Notes:
Remote controller
• When the display brightness on another Onkyo AV
component connected via
is changed, the “disc
tray light off” option might not work.
• Even if you selected the “disc tray light off” option,
the disc tray light will come on when the disc tray is
opened.
Notes:
• No sound is output during slow-motion playback.
• The slow-motion speed indication is only approxi-
mate, and the actual speed will vary from disc to disc.
• The display brightness cannot be adjusted via RIHD.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
You can use the following func-
tions during the slideshow:
2
STOP
To display the next or previous picture,
use the Next [
buttons.
] and Previous [
]
To turn a picture upside down, use the
Up/Down [ ]/[ ] buttons (not while
zoomed in).
To rotate a picture clockwise or coun-
terclockwise, use the Left/Right [ ]/
[ ] buttons (not while zoomed in).
To pause the slideshow, press the [ ]
button. Press the Play [ ] button to
resume.
PAUSE
PLAY
To zoom in or out, use the Fast Forward
[
] and Fast Reverse [ ] buttons.
Use the Left/Right [ ]/[ ] and Up/
Down [ ]/[ ] buttons to move around
the picture while zoomed in. To cancel
the zoom, press the Play [ ] button.
To return to the navigation window,
press the [MENU] button.
To view the thumbnail display, press
the [TOP MENU] button.
Use the Next [
] and Previous [
]
buttons to display the next or previous
thumbnail page.
To stop the slideshow, press the
Stop [ ] or [MENU] button.
Depending on the type of JPEG disc,
either the first nine pictures appear in
thumbnail-size or the disc navigation
window appears.
3
ENTER
Remote controller
The slideshow stops automatically
when all pictures have been displayed.
TOP MENU
MENU
Notes:
• You can view JPEG images in high definition by
changing the HD JPEG mode setting (see page 45).
• The Memory and Random functions cannot be used
with JPEG files.
• Chain mode cannot be used with JPEG files.
• The Zoom function cannot be used in HD JPEG mode.
Using JPEG CDs
The DV-CP706 supports JPEG CDs, so you can view
your photos on TV either individually or as a slideshow.
Load and select a CD containing
JPEG pictures.
1
Use the [ ], [ ], [ ], [ ] buttons to
select a picture, and then press the Play
[
] or [ENTER] button to start the
slideshow.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
CHAIN MODE
PARTY MODE
Using Chain Mode
Using Party Mode
DVD
CD
MP3
WMA
CD
MP3
WMA
With the Chain mode function, you can play all discs, all
DVD-Video discs, or all audio CDs and MP3/WMA
discs consecutively as if they were one big disc.
With the Party mode function, you can play all of the
audio CDs and MP3/WMA discs in random order.
Press the [PARTY MODE] button.
The CHAIN MODE and CD indicators
appear.
All loaded audio discs, including MP3
and WMA discs, are played in random
order.
Press the [CHAIN MODE] button
repeatedly to select CD, DVD, or
ALL.
1
Remote controller
The CHAIN MODE indicator flashes
on the display.
Press the Stop [ ] button to stop Party
ALL:
mode playback and cancel the Party
mode function.
All discs are played consecutively.
DVD:
Remote controller
All DVD-Video discs are played
consecutively.
CD:
All audio CDs, including MP3 and
WMA discs, are played consecu-
tively.
To cancel Chain mode, press the
[CHAIN MODE] button repeatedly
until the CHAIN MODE indicator dis-
appears.
While the CHAIN MODE indicator
2
is flashing, press the Play [
]
button to start Chain mode play-
back.
Remote controller
The Chain mode function will be can-
celled if you do not start playback
within 5 seconds of pressing the
[CHAIN MODE] button.
Note:
• JPEG files are skipped during Chain mode playback.
• With the DVD and All Chain modes, DVD-Video
menus are ignored and titles are played automatically.
This may not work with some discs.
• You can’t use the repeat functions with Chain mode.
• You can use the Random function with Chain mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Repeat Playback
JPEG
DVD
CD
MP3
WMA
With the Repeat Playback function you can play the cur-
rent disc, title, chapter, track, or folder of MP3/WMA
files over-and-over again.
Press the Play [ ] button to start
repeat playback.
1
REPEAT
Remote controller
Press the [REPEAT] button
repeatedly to select a repeat
option.
2
The currently selected repeat option
appears on-screen and “REPEAT”
appears on the display.
PLAY
Remote controller
The available options depend on the
current disc type, as follows:
DVD-Video:
Chapter, Title, 1 Disc, All Discs.
Audio CD:
Track, 1 Disc, All Discs.
MP3/WMA/JPEG:
Track, Folder, 1 Disc, All Discs.
To cancel Repeat Playback, use
the [REPEAT] button to select
3
Remote controller
SEARCH
Off.
REPEAT
A-B
Notes:
• Repeat Playback may not work with some
DVD-Video discs.
RANDOM
• If you press the [REPEAT] button while the Memory
Playback function is on (see page 38), the current
memory list will play repeatedly.
or Party mode.
• If you select another disc, repeat playback is can-
celled.
• The Repeat function can be used in combination with
the Random function (see page 37).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Audio CD:
1 Disc, All Discs.
MP3/WMA:
A–B Repeat Playback
MP3
WMA
DVD
CD
Folder (files in subfolders are not
played), 1 Disc, All Discs.
With the A–B Repeat Playback function you can play a
specified section over-and-over again.
With the “Title” option, chapters within
the current title are played at random.
With the “1 Disc” option, all titles,
chapters, tracks, and folders on the cur-
rent disc are played at random.
During playback, press the [A–B]
button to set the A point (i.e., the
start of the section you want to
repeat).
“Repeat A–” appears on-screen.
1
Remote controller
If you press the [RANDOM] button
during playback, random playback
begins after the current chapter, or track
has finished.
Press the [A–B] button again to
set the B point (i.e., the end of the
2
Remote controller
section you want to repeat).
Playback repeats between the A and B
points, and “Repeat A–B” appears on-
screen.
Press the Play [ ] button to start
random playback.
Random playback starts.
3
Remote controller
To cancel A–B Repeat Playback,
3
press the [A–B] button to select
Remote controller
Off.
To cancel random playback, use
the [RANDOM] button to select
Off.
4
Remote controller
Notes:
• A–B Repeat Playback may not work with some
DVD-Video discs.
• In some cases, the A and B points may be at slightly
different points to the ones you specified.
Notes:
• To select the next random disc, title, chapter, track, or
MP3/WMA folder during random playback, press the
Next [
] button.
• Random playback may not work with some
DVD-Video discs.
Random Playback
• Random playback cannot be used with the Memory
Playback function.
DVD
CD
MP3
WMA
• You can’t use the [SEARCH] button during random
playback.
random selection of discs, titles, chapters, tracks, or
MP3/WMA folders.
• During random playback, the remote controller’s nav-
igation [ ], [ ], [ ], [ ] buttons and number buttons
cannot be used with the disc navigation window.
• If you select another disc, random playback is can-
celled, except when the random option is set to “All
Disc,” in which case playback continues.
• The Random Playback function can be combined with
the Repeat Playback function.
Select a disc.
See page 26.
1
Press the [RANDOM] button
repeatedly to select a random
2
Remote controller
option.
The currently selected random option
appears on-screen.
The available options depend on the
current disc type, as follows:
DVD-Video:
Title, 1 Disc, All Discs.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Press the [ENTER] button.
The new item is added to the memory
list as step 01.
3
Remote controller
Memory List
No. Disc
1
Title/Folder
Chapter/Track
Chapter/Track 001 / 002 Current/Total --- / 008
Number
buttons
01
02
03
04
05
1
-
001 / 002
--- / ---
--- / ---
--- / ---
--- / ---
005 / 008
--- / ---
--- / ---
--- / ---
--- / ---
MEMORY
-
-
-
CLR
Repeat steps 2 and 3 to add more
items to the memory list.
New items will be added to the memory
list as steps 02, 03, and so on.
4
LAST
MEMORY
To play the memory list, press
the Play [ ] button.
5
Remote controller
ENTER
To stop playback, press the Stop
[ ] button.
6
Remote controller
Memory Playback
DVD
CD
MP3
WMA
With the Memory Playback function, you can create
your own memory list of up to 32 titles, chapters, or
tracks.
Inserting New Items in the List
Press the [MEMORY] button.
The Memory List window appears on-
screen, as shown.
To insert a new item into the
Remote controller
1
memory list, use the Up/Down
[ ]/[ ] buttons to select the step
before which you want to insert
the new item, and then press the
[ENTER] button.
Remote controller
Memory List
No. Disc
1
Title/Folder
Chapter/Track
Chapter/Track 001 / 002 Current/Total --- / 008
01
02
03
04
05
-
-
-
-
-
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
Memory List
No. Disc
1
Title/Folder
Chapter/Track
Chapter/Track 001 / 002 Current/Total --- / 008
01
02
03
04
05
1
-
001 / 002
--- / ---
005 / 008
--- / ---
The top row ( ) is used to enter disc,
title/folder, and chapter/track numbers.
Steps in the memory list are numbered.
1
3
-
001 / 002
001 / ---
--- / ---
003 / 008
--- / 008
--- / ---
Remote controller
Enter the disc, title/folder, and
chapter/track numbers of the
item to be inserted.
Press the [ENTER] button.
The new item is inserted into the mem-
ory list and subsequent items move
down the list.
Enter the disc, title/folder, and
chapter/track numbers of the
item you want to add to the mem-
ory list.
Use the remote controller’s Left/Right
[ ]/[ ] buttons to select the parame-
ters, and use the number buttons to
select Title/Folder or Chapter/Track.
The number of the currently selected
disc is already entered.
2
Remote controller
To add all of the titles, folders, chapters,
or tracks on the disc, press the [+10]
button.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Deleting Items from the List
During playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, the LAST indicator appears,
and “LAST MEM” appears on the dis-
play.
If the [LAST MEMORY] button is
pressed again, the last memory point
will be updated.
1
Remote controller
To delete an item, use the Up/
Remote controller
Down [ ]/[ ] buttons to select it,
and then press the [CLR] button.
The item is deleted and subsequent
items move up the list.
To stop playback, press the Stop
[ ] button once or twice.
2
At this point you may choose to
play another disc, or to turn off
Remote controller the DV-CP706.
Editing Steps
To edit a step, use the Up/Down
[ ]/[ ] buttons to select it, edit
the disc, title/folder, and chapter/
1
Remote controller
To resume playback, select the
disc and press the Play [ ] but-
3
track numbers, and then press
the [ENTER] button.
ton.
The Last Memory dialog box appears,
as shown.
Remote controller
Last Memory is set.
Start playback from memory location ?
To close the Memory Play Setup
window, press the [RETURN] but-
ton.
2
Remote controller
Yes
No
Memory Clear
To resume playback from last
memory point, select “Yes,” and
then press [ENTER].
4
Remote controller
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
• Deleting the memory list:
Press the Stop button to stop playback of the memory
list, and while “Memory” is displayed on-screen,
press the [CLR] button. The memory list is deleted and
“Memory Clear” is displayed on-screen.
Note:
• The entire memory list is cleared when the DV-CP706
is set to Standby.
Notes:
• The Last Memory function can store the settings for
up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s set-
tings are lost.
• The Last Memory function will not work while a
menu is being displayed on-screen.
Using Last Memory
DVD
• The Last Memory function may not work with some
DVD-Video discs.
• Even if you select another disc, or inadvertently turn
off the DV-CP706 during playback, you can resume
playback from the same point when you select the disc
again.
With the Last Memory function you can resume play-
back from where you left off even if another disc has
been selected or the disc has been removed. Last Mem-
ory also remembers the soundtrack and subtitle lan-
guages that you were using.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Selecting Languages & Audio
Formats
DVD
Some DVD-Video discs feature soundtracks in several
languages and audio formats (e.g., Dolby Digital or
DTS). Music DVD-Video discs sometimes feature
soundtracks in several audio formats, such as PCM or
Dolby Digital 5.1. See the disc’s sleeve notes for details.
ANGLE
SUBTITLE
During playback, press the
Remote controller
AUDIO
[AUDIO] button repeatedly to
cycle through the available
soundtracks.
appears on-screen for several seconds.
Notes:
Selecting Camera Angles
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 27), or select
another disc, the soundtrack language will revert to
your default language (see page 47), or the disc’s
default language.
DVD
Some DVD-Video discs feature multiple camera angles
that allows you to view scenes from different angles. If
the currently playing DVD-Video disc features multiple
• With some discs, selecting another soundtrack may
cause the picture to skip momentarily.
camera angles, the camera
indicator appears on the
• With some DVD-Video discs you need to select
soundtracks from a menu, and you may not be able to
select other soundtracks during playback.
display. Such a disc usually has the multiple camera
angle logo ( ) printed on its sleeve notes.
Press the [ANGLE] button
Remote controller
repeatedly to cycle through the
available camera angles.
Selecting Subtitles
The number of the currently selected
camera angle appears on-screen. For
example, on a disc with three camera
angles, you’d see 1/3, 2/3, and 3/3.
DVD
Some DVD-Video discs feature subtitles in several lan-
guages. See the disc’s sleeve notes for details.
During playback, press the [SUB-
Remote controller
Notes:
TITLE] button repeatedly to cycle
through the available subtitles.
The name of the selected subtitle
appears on-screen for several seconds.
To turn off subtitles, use the [SUBTI-
TLE] button to select Off.
• With some DVD-Video discs you may not be able to
select different camera angles even though the camera
indicator is displayed.
• With some DVD-Video discs you can select camera
angles from a menu.
• Some DVD-Video discs won’t allow you to select dif-
ferent camera angles while playback is paused.
Notes:
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 27), or select
another disc, the subtitle language will revert to your
default subtile language (see page 47), or the disc’s
default subtitle language.
• With some DVD-Video discs you can select subtitles
from a menu, and you may not be able to select subti-
tles during playback.
• To check the subtitle language currently selected,
press the [SUBTITLE] button once. The current set-
ting will appear on-screen for several seconds.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
ENTER
ZOOM
Zooming
JPEG
DVD-V
With the Zoom function you can enlarge any part of the
picture.
During playback or paused,
press and hold the [ZOOM] but-
1
Remote controller
ton.
“Zoom x 1.0” appears on-screen.
Press the [ZOOM] again repeat-
edly to Zoom in.
2
Remote controller
The number of zoom steps available
depends on the resolution of the disc or
file.
After the maximum zoom, the picture
returns to its normal size.
To see other areas of the picture
while zoomed, use the remote
3
Remote controller
controller’s arrow [ ], [ ], [ ],
[
] buttons.
Notes:
• During a JPEG slideshow, you can use the Fast For-
ward [ ] and Fast Reverse [ ] buttons to zoom in
and out.
• The Zoom function may not work with some DVDs.
• The Zoom function can also be used while playback is
paused or during slow-motion playback.
• The Zoom function cannot be used with HD JPEG.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Displaying Information
DVD
You can display various information about the current
disc, title, chapter, or track as follows.
During playback, press the [DIS-
PLAY] button.
1
Various information appears on-screen.
The operating status (e.g., Stop, Play,
Resume), disc number, and disc type
information is displayed along the top
DISPLAY
Remote controller
of the screen.
DVD-Video:
Current title number, total number
of titles on disc, elapsed title time,
remaining title time, total title time,
selected soundtrack, selected subti-
tle, and the number of available
camera angles.
DISPLAY
Press the [DISPLAY] button
2
again to see more information.
DVD-Video: Current chapter number,
total number of chapters in title,
Remote controller
elapsed chapter time, remaining chap-
ter time, total chapter time.
Press the [DISPLAY] button
again to cancel the information
display.
3
Remote controller
■ For audio CDs:
Pressing the [DISPLAY] button repeatedly during play-
back will display the following information:
• Elapsed track time (on-screen, the elapsed track time
and remaining track time will be displayed)
• Remaining track time
• Elapsed disc time (on-screen, the elapsed disc time
and remaining disc time will be displayed)
• Remaining disc time
■ For MP3 and WMA discs:
Pressing the [DISPLAY] button repeatedly during play-
back will display the following information:
• Elapsed track time
• Track name
• Folder name
• Total number of folders
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706
This chapter explains the various functions and settings of the on-screen setup menus.
Functions and settings are arranged into six menus: Picture, Audio, Language, Display, Operation Setting, and
Initial Setup.
details.
Menu
Setting
Page #
44
TV Shape
Select the aspect ratio that matches your TV.
Stretch the picture to fit your TV screen.
Turn HDMI video output on or off.
View Mode
45
Progressive Setting
HD JPEG mode
Video Black Level
Brightness
45
Set the component video output to progressive or interlaced.
Select the video resolution for the HDMI OUT.
For displaying JPEG images at a high resolution on a HDTV.
Choose a video black level.
45
Picture
45
45
46
Adjust the picture brightness.
46
Sharpness
Adjust the picture sharpness.
46
lian model only)
Convert the disc’s video format.
46
46
Settings for the digital signal output by the optical, coaxial, and
Digital/HDMI Audio Out
Audio
Select whether or not the DV-CP706 downsamples 96 kHz dig-
46
46
47
On-Screen Language
Set the Dynamic Range function.
Select a language for the on-screen setup menus and mes-
sages.
Language
Display
Disc Menu Language
On-Screen Display Color
Background
Select your preferred language for disc menus.
Select your preferred language for soundtracks.
Select your preferred language for subtitles.
Turn on or off on-screen messages and indicators.
Select a color for on-screen setup menus and messages.
Select a background color for when playback is stopped.
Set the Screen Saver function.
47
47
47
47
47
47
47
48
48
49
49
49
49
Screen Saver
Parental Lock
Set the Parental Lock function.
Operation
Setting
Security Code
Change a security code for use with parental lock.
Turn on or off RIHD control over HDMI.
HDMI Control
Power Control
Turn on or off RIHD power control over HDMI.
Turn on or off RIHD direct change over HDMI.
Sets the Auto power off function.
Direct Change
Auto Power Off
Initial Setup TV Shape
HDMI Output Setting
On-Screen Language
This menu appears automatically the very first time you turn on
your DV-CP706. (These settings are available in other menus.)
23
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
When you’ve finished, press the
[SETUP] button again.
The on-screen setup menu closes.
6
Remote controller
ENTER
SETUP
Picture Menu
TV Shape
With this setting you can select a picture format to match
the aspect ratio of your TV.
Using the On-screen Setup Menus
4:3 Letter box: Choose this
option if you have a standard TV
(4:3 aspect ratio). When you
This section explains how to use the on-screen setup
menus.
watch widescreen DVD-Video
movies, the entire picture will be
visible and there will be black
Turn on your DV-CP706 and TV.
On your TV, select the video input to
which the DV-CP706 is connected.
1
bars at the top and bottom of the screen, as shown.
Press the [SETUP] button.
The on-screen setup menu appears, as
4:3 Pan & Scan: Choose this
option if you have a standard TV
2
Remote controller
shown.
(4:3 aspect ratio) and want to use
the full height of the screen when
Picture
TV Shape
: 16:9 Compressed
watching widescreen
DVD-Video movies. In order to
use the full height of the screen, the picture will be
cropped on both sides, as shown. This option won’t
work with discs that don’t support pan and scan.
View Mode
: Normal
: On
HDMI Output Setting
Progressive Setting
HD Resolution
HD Jpeg mode
Video Black Level
Brightness
: Interlace
: Auto
: Off
: Light
: 4
16:9 Widescreen: Choose this option if you have a
widescreen TV (16:9 aspect ratio). Depends on TV,
the picture appears stretched when watching programs
in 4:3 format.
Sharpness
: 4
Use the remote controller’s navi-
gation buttons to navigate the
menus.
Use the Left/Right [ ]/[ ] buttons to
move left or right. Use the Up/Down
[ ]/[ ] buttons to move up or down.
3
16:9 Compressed (default):
Choose this option if you
have a widescreen TV (16:9
aspect ratio) and the picture
appears stretched when
Remote controller
watching programs in 4:3 for-
mat. Some widescreen TVs
have a setting to correct this. If your TV doesn’t, and
4:3 programs appear stretched, select this option to cor-
rect the problem.
When you’ve selected an item,
press the [ENTER] button to see
the available options.
4
Remote controller
Notes:
• This setting does not apply to DVD menus.
• When the HDMI OUT signal is at a resolution of
720p, 1080i, or 1080p programs in 4:3 format will
appear stretched, so we recommend that you select the
16:9 Compressed option.
• With some DVD-Video discs this setting may have no
effect. See the disc’s sleeve notes to see which picture
format is used.
Use the navigation buttons to
select the options, and press the
[ENTER] button to confirm your
selection.
Press the [RETURN] button to go back
one step.
5
Remote controller
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
View Mode
HD Resolution
With this setting you can adjust the aspect of the picture
so that it fits your TV screen. Due to your TV’s aspect
ratio setting and the DVD’s aspect ratio, black bars may
appear above and below the picture or at the sides and the
aspect of the picture may be unsuitable. In this case, use
this setting to adjust the aspect of the picture as you like.
With this setting you can set the video resolution for the
HDMI OUT.
Auto (default): The resolution is automatically
scaled to the preferred resolution of the TV con-
nected to the HDMI OUT.
If Auto is selected but the DV-CP706 doesn’t sup-
port the resolution preferred by the TV, the resolu-
tion will be 480p/576p.
Normal (default): The picture is displayed in its
original aspect ratio.
View Mode 1: The picture is stretched horizontally
to make it fit the height of the screen.
480i (480i/576i): The setting displayed depends on
the country in which you purchased the DV-CP706.
720 x 480i 60 Hz or 720 x 576i 50 Hz
View Mode 2: The picture is stretched vertically to
make it fit the width of the screen.
480p (480p/576p): The setting displayed depends on
the country in which you purchased the DV-CP706.
720 x 480p 60 Hz or 720 x 576p 50 Hz
View Mode 3: The picture is stretched horizontally
and vertically to make it fit the screen.
720p: 1280 x 720p 50/60 Hz
1080i: 1920 x 1080i 50/60 Hz
1080p: 1920 x 1080p 50/60 Hz
Tip:
The view mode can also be changed by using
the remote controller’s [ASPECT] button.
Note:
Tip:
• This setting does not apply to DVD menus.
When the HDMI Output Setting is set to On, you can
also change this setting by using the remote controller’s
[RESOLUTION] button (see page 24).
HDMI Output Setting
With this setting you can turn the HDMI video output on
or off. See page 24 for more information.
Note:
• IfAuto selected but the DV-CP706 doesn’t support the
TV’s native resolution, the resolution will be 480p/
576p.
On (default): Video is output by the HDMI OUT.
Off: Video is not output by the HDMI OUT.
HD JPEG mode
Progressive Setting
If your TV is connected to the HDMI OUT and the
HDMI resolution is set to 720p, 1080i, or 1080p, this set-
ting allows you to display your JPEG pictures in high
definition.
With this setting you can set the component video output
to progressive or interlaced. While the HDMI Output Set-
ting is set to On, this setting is fixed at Interlaced and can-
not be changed. See page 24 for more information.
On: JPEG pictures displayed in high definition.
Interlaced: Component video output is interlaced.
Off (default): JPEG pictures displayed as normal.
Progressive: Component video output is progressive.
Notes:
Notes:
• If your TV is connected to a video output other than
the HDMI OUT, or the HD Resolution set to some-
thing other than 720p, 1080i, or 1080p, even if this
setting is set to On, your JPEG pictures will not be
displayed in high definition.
• When using HD JPEG, it may take a while to display
each picture. And the Zoom function cannot be used.
Also, on-screen status messages such as “Play” and
“Stop” are not displayed.
• When Progressive is selected, no video is output by
the composite video, S-Video, and HDMI outputs.
• This setting can also be changed by pressing and hold-
ing the Previous [
] button, and then pressing [ON/
STANDBY] button.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
Video Black Level
Audio Menu
With this setting you can adjust the picture blackness of
analog video output.
Digital/HDMI Audio Out
Light: Blacks are lighter, and the entire picture
becomes lighter.
With this setting you can configure the optical, coaxial,
and HDMI digital outputs.
Dark: Blacks are darker, and the entire picture
becomes darker.
All (default): Dolby Digital and DTS signals are out-
put as they are.
On the North American model, Light is the default set-
ting. On theAustralian model, Dark is the default setting.
PCM: Dolby Digital signals are down mixed to 2
channels and output as PCM.
Off: No digital signals are output.
Brightness
With this setting you can adjust the picture brightness.
Linear PCM Out
1-7: 1 is the darkest. 7 is the brightest. The default
brightness is 4 (default).
With this setting you can configure the DV-CP706 to
output digital audio with higher sampling rates (e.g.,
96 kHz) as it is or down sample it to 48 kHz.
If the AV component you connect to the DV-CP706’s
digital audio outputs supports 96 kHz digital audio,
select Down Sample Off. Otherwise, select Down Sam-
ple On.
Sharpness
With this setting you can adjust the picture sharpness.
1-7: 1 is the softest. 7 is the sharpest. The default
sharpness is 4 (default).
Down Sample On: 96 kHz digital audio is down
PAL Output Setting (Australian model only)
sampled and output at 48 kHz.
Down Sample Off (default): 96 kHz digital audio is
output as it is.
With this setting you can specify how the DV-CP706
outputs video signals.
Notes:
AUTO (default): Use this option to watch PAL and
NTSC format discs. The DV-CP706 does not convert
the video format. When you play a PAL disc, the
video output will be PAL format. And when you play
an NTSC disc, it’ll be NTSC format. Your TV must
support NTSC playback in order to watch NTSC for-
mat discs.
• Some copy-protected DVD-Video discs may use
96 kHz digital audio only for A/D conversion to the
analog audio outputs.
• With some discs, even if you select Down Sample Off,
the digital audio will be down sampled to 48 kHz, and
in some cases may not be output by the DV-CP706’s
digital audio outputs.
NTSC: Use this option if you want to play only
NTSC format discs. When you play a PAL disc, the
DV-CP706 will convert PAL format video signals to
NTSC-compatible format.
Dynamic Range Control (Dolby Digital
only)
With the Dynamic Range Control function you can
reduce the dynamic range of Dolby Digital material so
that you can still hear quiet parts even when listening at
low volume levels—ideal for watching movies late at
night when you don’t want to disturb anyone.
PAL: Use this option if your TV doesn’t support
NTSC playback, or the picture is distorted when
watching NTSC discs. The DV-CP706 will convert
NTSC format video signals to PAL-compatible for-
mat.
On: The dynamic range of Dolby Digital material is
compressed.
Note:
• This setting can also be changed by pressing and hold-
ing the Next
STANDBY] button.
button, and then pressing [ON/
Off (default): The full dynamic range is preserved.
Notes:
• The impact of the Dynamic Range Control function
depends on the Dolby Digital material that you are
playing and with some material there will be little or
no effect.
• When the DV-CP706 is set to Standby, this function is
automatically set to off.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
• With some DVD-Video discs you can select subtitles
from a menu.
Language Menu
On-Screen Language
Display Menu
With this setting you can select a language for the on-
screen setup menus and messages.
Select one of the displayed language.
On-Screen Display
With this setting you can turn on or off on-screen mes-
sages, such as “Play,” “Stop,” and “Resume.”
Disc Menu Language
for disc menus. When you play a DVD-Video disc with
multiple language disc menus, your preferred language
will be selected automatically.
Select “Others” if you can’t find your language dis-
played. See “Selecting Other Languages” on page 49.
On (default): On-screen messages are displayed.
Off: On-screen messages are not displayed.
On-Screen Display Color
With this setting you can set the color and theme of the
Disc navigation window.
Notes:
Sapphire (default):
Pearl:
• Not all DVD-Video discs have menus in multiple lan-
guages.
• Even if a DVD-Video disc has menus in multiple lan-
guages, this setting may not always work.
• If a DVD has only one menu language, that will be
used.
• With some DVD-Video discs you can select languages
from a menu.
Amethyst:
Garnet:
Background
With this setting you can select the color of the back-
ground that’s displayed when the DV-CP706 is stopped.
Audio Language
Blue:
Gray:
for soundtracks. When you play a DVD-Video disc with
multiple language soundtracks, your preferred language
will be selected automatically.
Graphic (default): The theme picture specified for
the On-Screen Display Color setting is used.
Select “Others” if you can’t find your language dis-
played. See “Selecting Other Languages” on page 49.
Screen Saver
With the Screen Saver function you can protect your TV
against screen burn-in, which can occur when the same
image or menu is displayed for a long time.
Notes:
• Not all DVD-Video discs have soundtracks in multiple
languages.
On (default): Screen saver on.
• Even if a DVD-Video disc has soundtracks in multiple
languages, this setting may not always work.
• If a DVD has only one soundtrack, that will be used.
• With some DVD-Video discs you can select languages
from a menu.
Off: Screen saver off.
When the Screen Saver function is set to On, and
DVD-Video playback is stopped for 15 minutes, the
Screen Saver function automatically displays a moving
image.
Subtitle Language
Once the screen saver has been activated, you can cancel
it by pressing the Play [ ] button.
With this setting you can select your preferred language
for subtitles. When you play a DVD-Video disc with
multiple language subtitles, your preferred language will
be selected automatically.
Note:
• The Screen Saver function also works with audio CDs
and MP3/WMA discs.
Select “No Subtitle” if you don’t want subtitles dis-
played. Select “Others” if you can’t find your language.
See “Selecting Other Languages” on page 49.
Notes:
• Not all DVD-Video discs have subtitles.
• Even if a DVD-Video disc has subtitles in multiple
languages, this setting may not always work.
• If a DVD has only one subtitle language, that will be
used.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
• Not all discs use parental lock. See the disc’s sleeve
notes for details.
Operating Setting Menu
• Discs with parental lock may cut certain scenes,
replace certain scenes with children-friendly scenes,
or prevent playback of the entire disc.
Parental Lock
With the Parental Lock function you can block access to
certain scenes that the authors have flagged as being
unsuitable for children.
Change the Security Code
To use parental lock, you must set a security code.
To change the Security Code, confirm your existing code
then enter a new one.
Select “Operation Setting” menu
in the setup.
1
Select “Operation Setting” menu
in the setup.
1
Use the navigation [ ]/[ ]/[ ]/[ ]
buttons to select “Parental
Lock”, and then press the
2
Use the navigation [ ]/[ ]/[ ]/[ ]
buttons to select “Security
Code”, and then press the
Remote controller
2
[ENTER] button.
The security code input screen appears.
Remote controller
[ENTER] button.
The security code input screen appears.
Enter the security code using the
remote controller’s number but-
3
Remote controller
Enter the existing security code
using the remote controller’s
3
tons, and then press the [ENTER]
button.
The default security code is “8888.”
You can change the security code in the
next step.
Remote controller
number buttons, and then press
the [ENTER] button.
The default security code is “8888.”
Even if a new security code has been
entered, the code “8888” can still be
used.
Once the security code has been
entered, the new security code input
screen appears.
Use the Up/Down [ ]/[ ] buttons
to change the level of parental
lock, and then press the [ENTER]
4
Enter the new security code
using the remote controller’s
Remote controller
4
Remote controller
button.
number buttons, and then press
the [ENTER] button.
The new security code has been set.
At level 8 parental lock is off, with level
1 being the strictest level.
Notes:
• When entering a security code, you can use the [CLR]
button to delete the numbers entered so far, if neces-
sary.
Note:
• If you forget your security code, enter “8888” instead.
“8888” is a security code that can always be used.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
• HDMI direct change only works with RIHD-compati-
ble components that support it and may not work prop-
erly with some components due to their settings or
compatibility.
HDMI Control
With this setting, you can turn RIHD control over HDMI
on or off.
On (default): RIHD control on.
Auto Power Off
Off: RIHD control off.
Notes:
The Auto power off function automatically turns off the
DV-CP706 after 20 minutes of inactivity.
• RIHD (Remote Interactive over HDMI) is Onkyo’s
implementation of CEC (Consumer Electronics Con-
trol), which allows integrated system control over
HDMI and is part of the HDMI standard. In addition
to Onkyo AV components, it allows interoperability
with CEC-compatible AV components and TVs made
by other manufacturers. However, operation with
components other than RIHD-compatible components
or recommended components cannot be guaranteed.
• Select Off if a connected component is incompatible
or you’re not sure about its compatibility.
• If operation is unreliable when set to On, select Off
instead.
Initial Setup Menu
This menu appears automatically the very first time you
page 23 for more information.
TV Shape—see page 44
HDMI Output Setting—see page 45
On-Screen Language—see page 47
Power Control
With this setting, you can turn RIHD power control over
HDMI on or off.
Selecting Other Languages
On (default): RIHD power control on.
This section explains how to select other languages for
disc menus, audio, and subtitles.
Off: RIHD power control off.
Notes:
Select “Others” from the Disc
Menu Language, Audio Lan-
• The Power Control setting can be set only when the
HDMI Control setting is set to On.
1
Remote controller
guage, or Subtitle menu, and
then press [ENTER].
The language code boxes appear.
• When set to On, the DV-CP706 can be turned on or off
automatically along with the other RIHD-compatible
components in the system.
• HDMI power control only works with RIHD-compat-
ible components that support it and may not work
properly with some components due to their settings
or compatibility.
• When set to On, the DV-CP706 consumes more
power.
Use the remote controller’s Left/
Right [ ]/[ ] buttons to select the
code boxes.
Use the Up/Down [ ]/[ ] buttons
to enter a language code.
See adjacent table for language codes.
2
Remote controller
• When set to On, the DV-CP706 enters Standby mode
and the STANDBY indicator lights up.
Direct Change
When you’ve finished, press the
Remote controller [ENTER] button.
3
With this setting, you can turn RIHD direct change over
HDMI on or off.
On (default): RIHD direct change on.
Off: RIHD direct change off.
Notes:
• The Direct Change setting can be set only when the
HDMI Control setting is set to On.
• When set to On, when playback is started on the
DV-CP706, it will automatically be selected as the
input source on an RIHD-compatible TV or AV
receiver.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP706—Continued
Language Code List
Use this list when specifying other languages.
Language
Icelandic
Hebrew
Code
IS
IW
Language
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Code
TT
Language
Japanese
English
French
German
Italian
Spanish
Chinese
Dutch
Portuguese
Swedish
Russian
Korean
Code
JA
EN
FR
DE
IT
Language
Kirghiz
Latin
Code
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
PA
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Yiddish
JI
Lingala
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
JW
KA
KK
KL
KM
KN
KS
KU
Laothian
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
ES
ZH
NL
PT
SV
RU
KO
EL
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EO
ET
EU
FA
Xhosa
Yoruba
Zulu
Greek
Afar
Malay
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali
Tibetan
Breton
Catalan
Corsican
Czech
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
Oromo
Oriya
Panjabi
Polish
PL
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Romanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Sinhalese
Slovak
Slovenian
Samoan
Shona
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
Welsh
Danish
Bhutani
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
FI
FJ
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Irish
Scots-Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
TN
TO
TR
TS
IE
IK
IN
Turkish
Tsonga
Indonesian
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible cause
Remedy
The power cord is not connected.
Can’t turn
on the
DV-CP706?
Turn off the DV-CP706, wait five seconds, then try turning it on
again. If that fails, disconnect the power cord from the wall out-
let, wait 10 seconds, reconnect it, then try turning it on again.
External interference is affecting the DV-CP706’s
digital circuitry.
On your TV, select the input to which the DV-CP706 is con-
nected (page 23).
The wrong input source is selected on your TV.
The video cable is not connected properly.
Check the video cable and correct as necessary (pages19, 21).
On theAustralian model, the PAL Output Setting is Change the PAL Output Setting to the correct setting for the
set incorrectly for the connected TV.
TV.
No HDMI Video Output?
The HDMI Output Setting is set to Off.
Try pressing the [RESOLUTION] button on the remote con-
troller repeatedly to switch the HDMI OUT on, and then
pressing the [RESOLUTION] button repeatedly to get pic-
ture (page 24).
Your TV doesn’t support HDMI Resolution set-
tings of 480i, 720p, 1080i, and 1080p.
No Component Video Output?
Press and hold down the Previous [
] button, and then
press the [ON/STANDBY] button to change the component
video output to interlaced (page 45). Make sure the PRGV
indicator is not on.
No picture?
Your TV does not support progressive scanning.
When HD JPEG mode is on, no video is output by the COM-
PONENT VIDEO OUT.
HD JPEG mode is on.
No S-Video or Composite Video Output?
The Progressive setting is set to Progressive.
When set to Progressive, only the component video output
outputs video.
Press and hold down the Previous [
] button, and then
press the [ON/STANDBY] button to change the component
video output to interlaced (page 45). Make sure the PRGV
indicator is not on.
The Progressive setting is not set to interlaced.
Your TV is connected with S-video or composite
video and HD JPEG mode is selected.
HD JPEG mode can only be used with the HDMI OUT.
The wrong input source is selected on your hi-fi
amp or AV receiver.
On your hi-fi amp or AV receiver, select the input to which
The audio cable is not connected properly.
Check the audio cable and correct as necessary (page 19–21).
The hi-fi amp or AV receiver connected to the
DV-CP706’s audio outputs is not on.
Check the Digital/HDMI Audio Out setting and correct as
necessary (page 46).
The Digital/HDMI Audio Out setting is incorrect.
No Sound from the HDMI OUT?
Change the Digital/HDMI Audio Out setting to either All or
PCM (page 46).
The Digital/HDMI Audio Out setting is set to Off.
The DVD player is connected to the DVI jack on
your TV or AV receiver.
source component is only DVI/HDCP-Compatible.
No sound?
The HDMI setting on your TV orAV receiver is set Change the HDMI setting on your TV or AV receiver to
to DVI.
HDMI.
Your TV or AV receiver doesn’t support Dolby
Digital.
Change the Digital/HDMI Audio Out setting to PCM (see
“Audio Formats” on page 22).
The DV-CP706 will not be able to play DTS format audio or
soundtracks. On your DVD-Video disc’s audio setup menu,
select an audio format other than DTS (see “Audio Formats”
on page 22).
Your TV or AV receiver doesn’t support DTS.
Your TV or AV receiver doesn’t support 96 kHz
PCM.
Change the Linear PCM Out setting to Down Sample On
(page 46).
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
Symptom
Possible cause
No Digital Audio Output?
The Digital/HDMI Audio Out setting is set to Change the Digital/HDMI Audio Out setting to
Off. either All or PCM (page 46).
YourTV orAV receiver doesn’t support Dolby Change the Digital/HDMI Audio Out setting to
Digital.
PCM (page 46).
The DV-CP706 will not be able to play DTS for-
mat audio or soundtracks. On your DVD-Video
disc’s audio setup menu, select an audio format
other than DTS.
No sound?
Your TV or AV receiver doesn’t support DTS.
PCM, DTS sources are not output by the digital
audio outputs. Change the setting to ALL.
The source material is DTS and the Digital/
HDMI Audio Out setting is set to PCM.
Your TV or AV receiver doesn’t support
96 kHz PCM.
Change the Linear PCM Out setting to Down Sam-
The disc is dirty.
Remove the disc and clean it (page 10).
The picture distorts
occasionally?
function.
these functions. This is normal.
The DV-CP706 is connected to your TV via a
VCR or other video equipment and its copy
protection system is affecting the picture.
Picture instability or
noise?
Connect the DV-CP706 directly to your TV
(page 19).
No discs loaded.
Load some discs (page 25).
The selected disc cannot be played because
it’s incompatible.
Load only compatible discs (page 8).
The disc is upside down.
The disc is not centered in the disc bay.
The disc is dirty.
Load the disc the correct way up (page 25).
Remove the disc and clean it (page 10).
Can’t start playback?
The selected disc has parental lock and the
Parental Lock function is on.
Turn off the Parental Lock function (page 48).
Can play CDs but not
DVDs?
The Chain mode function is set to play only
CDs.
mode (page 35).
Can play DVDs but not
CDs?
The Chain mode function is set to play only
DVDs.
Change the Chain mode setting or cancel Chain
mode (page 35).
The disc is not ISO9660 Level 2 format or
Joliet.
Use only ISO9660 Level 2 format or Joliet discs
(page 9).
Can’t play MP3/WMA/
JPEG discs?
The disc has not been finalized.
Finalize the disc (page 9).
MP3 files without a “.mp3” or “.MP3” file-
name extension are not recognized.
Use the correct filename extension (page 9).
Can’t select MP3 files?
Can’t play WMA files?
Can’t view JPEG files?
Use MP3 files that use the supported sampling
rates and bit-rates.
The sampling rate or bit-rate is not supported.
WMA files without a “.wma” or “.WMA” file-
name extension are not recognized.
Use the correct filename extension (page 9).
Don’t use the copyright option (page 9).
Use the correct filename extension (page 9).
The WMA file’s copyright option is on.
JPEG files without a “.jpg” or “.JPG” filename
extension are not recognized.
Use JPEG files that are less than 5 megabytes
(page 9).
The JPEG file is too big.
The disc is dirty.
The message“BAD DISC”
appears on the display?
Remove the disc and clean it (page 10).
Turn off the DV-CP706, wait five seconds, then
turn it on again. If that doesn’t resolve the issue,
disconnect the power cord from the wall outlet,
wait five seconds, reconnect it, then try again.
Buttons on the
DV-CP706 and remote
controller don’t work?
Power supply voltage fluctuations and other
anomalies, such as static electricity, can inter-
fere with normal operation.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
The batteries are flat.
Replace with new batteries (page 17).
(page 17).
The batteries are installed incorrectly.
You’re not pointing the remote controller at
the DV-CP706’s remote sensor.
Point the remote controller at the DV-CP706’s
remote sensor (page 17).
Buttons on the
Use the remote controller closer to the DV-CP706
(page 17). The remote controller has a range of
approximately 16 ft. (5 meters).
DV-CP706 work OK but
those on the remote con-
troller don’t?
You’re too far away from the DV-CP706.
Make sure that the DV-CP706 is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
A strong light source is interfering with the
DV-CP706’s remote sensor.
If the DV-CP706 is installed in a cabinet with
colored glass doors, the remote controller may
not work reliably when the doors are closed.
Open the doors, or use a cabinet without colored
glass.
The
cable is not connected properly.
Make sure the
To use
cable is connected properly.
connection
, you must make an
The
work?
functions don’t
The DV-CP706 is not connected with an ana- and an analog audio connection (RCA) between
log audio connection.
the DV-CP706 and theAV receiver, even if they are
connected digitally.
The HDMI Control setting is set to Off.
Set the HDMI Control setting to On.
A component in your system does not support Refer to the component’s instruction manual to see
CEC. if it supports CEC.
A component in your system has HDMI CEC Refer to the component’s instruction manual and
control turned off.
turn on HDMI CEC control.
Refer to the other component’s instruction manual
to see if it supports CEC and check your connec-
tions.
One of the components in your system does
not support CEC or is not connected correctly.
RIHD doesn’t work?
There’s a problem with the HDMI cable that
you’re using.
Try another HDMI cable.
The DV-CP706’s settings may be changed by
disconnecting and connecting the HDMI
cable.
Display a video manually on the TV.
An
cable is connected to the DV-CP706. Disconnect the
cable.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
■ Abnormal Behavior
The DV-CP706 contains a microcomputer for signal processing and control functions. In very rare situations, severe
interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this
should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.
Alternatively, press and hold the Stop [ ] button until “RESET” appears on the display (about 10 seconds).
■ Restoring the Default Settings
To reset the DV-CP706 to its factory defaults, turn it on, and when “ONKYO DVD” has disappeared from the display,
while holding down the Stop [ ] button, press the [ON/STANDBY] button. “INITIALIZE” appears on the display.
When the reset is complete, “COMPLETE” is displayed, and the DV-CP706 enters Standby mode.
■ HDMI Status Mode
If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection
by pressing and holding down the DV-CP706’s [DISPLAY] button for 10 seconds until a message ID appears on the
display. Look up the message ID in the following tables and check the HDMI connections and settings on both the
DV-CP706 and the connected component.
HDMI connection and HDMI-related settings status
Displayed ID
Message
MSG ID 001
MSG ID 005
MSG ID 015
Turn the DV-CP706 and the connected component off, then turn them on again. Make sure that the
connected component is working properly and that the DV-CP706’s HDMI settings are configured
suitably for that component.
No picture from the HDMI connection
Displayed ID
Message
MSG ID 002
The HDMI Output Setting is set to Off. Change it to On (page 45).
MSG ID 003
MSG ID 004
The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI
input on the TV or AV receiver is correctly configured to received HDMI.
Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
The connected component may not support HDCP. Make sure the connected component supports
HDCP.
Turn the DV-CP706 and the connected component off, then turn them on again.
receive the video output by the DV-CP706. Also, with a DVI connection, there will be no sound.
MSG ID 005
MSG ID 006
MSG ID 007
The DV-CP706’s HD Resolution setting is set to 480i or 720p or 1080i or 1080p. If your TV doesn’t
support these resolutions, select another resolution (page 24).
MSG ID 008
MSG ID 009
The connected component may not be receiving the HDMI signal properly.
No sound from the HDMI connection
Displayed ID
Message
(page 46).
MSG ID 010
MSG ID 011
MSG ID 014
The connected component may not support 96 kHz PCM. Set the DV-CP706’s Linear PCM Out
setting to Down Sample On (page 46).
MSG ID 012
MSG ID 013
The connected component may not support Dolby Digital. Set the DV-CP706’s Digital/HDMI Audio
Out setting to PCM (page 46).
The connected component may not support DTS.
The DV-CP706 cannot play the DTS format audio or soundtrack. On your DVD-Video disc’s audio
setup menu, select an audio format other than DTS.
MSG ID 016
MSG ID 017
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
NTSC (North American model),
PAL/NTSC (Australian model)
Signal System
Composite Video Output/Impedance
S-Video Output/Impedance
1.0 V(p-p)/75Ω negative sync, RCA
Y: 0.7 V(p-p)/75Ω negative sync, 4-pin mini DIN
C: 0.286 V(p-p)/75Ω
Component Video Output/Impedance
DVD Linear Audio
Y: 1.0 V(p-p)/75Ω, PB/PR: 0.7 V(p-p)/75Ω, RCA
4 Hz–44 kHz(96 kHz), 4 Hz–22 kHz(48 kHz)
4 Hz–20 kHz(44.1 kHz)
95 dB
Audio CD
Signal to Noise Ratio
Audio Dynamic Range
THD (Total Harmonic Distortion)
Wow and Flutter
95 dB
0.007% (1 kHz)
Below threshold of measurability
Digital
Audio Output
Optical
–22.5 dBm
Digital
Audio Output/
Impedance
0.5 V (p–p), 75 Ω
Coaxial
Audio Output/
Impedance
Analog
2.0 V (rms), 540 Ω
North American model
Australian model
AC 120 V, 60 Hz
Power supply
AC 100–240 V, 50 Hz
Power Consumption
15 W
Stand-by Power Consumption
Dimensions (W x H x D)
Weight
0.5 W
435 X 91 X 431 mm (17-1/8" X 3-9/16" X 16-15/16")
5.3 kg (11.7 lbs.)
Operating Conditions Temperature/Humidity
5°C–35°C (41°F–95°F) / 5%–85%
AUDIO CD, DVD-VIDEO, MP3, WMA, CD-R and RW,
DVD R and RW (VIDEO MODE), JPEG-CD
Disc that have not been property finalized may only be par-
tially playable or not playable at all.
Disc compatibility
Specifications and features subject to change without notice.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
HOMEPAGE
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
I0806-1
SN 29344788
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
* 2 9 3 4 4 7 8 8 *
Download from Www.Somanuals.com. All Manuals Search And Download.
|