Onkyo DVD Player CP702 User Manual

Contents  
Important Safety Instructions...........3  
DVD Changer  
Precautions .......................................4  
Introduction .......................................6  
Controls & Connectors ...................10  
Before Using the DV-CP702 ...........15  
Connecting the DV-CP702 ..............16  
DV-CP702  
Instruction Manual  
Connecting  
-compatible AV  
Components .................................19  
Powering Up & Setting Up the  
DV-CP702 .......................................20  
Basic Playback ................................21  
Advanced Playback ........................31  
Configuring the DV-CP702 .............38  
Troubleshooting ..............................45  
Specifications .................................47  
Thank you for purchasing an Onkyo DV-CP702 DVD  
Changer. Read this manual carefully before using your  
new DVD Changer. A good understanding of its features  
and operation will allow you to achieve optimum perfor-  
mance and enjoyment.  
Keep this manual for future reference.  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING:  
WARNING  
AVIS  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS APPARATUS TO RAIN OR  
MOISTURE.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
RISQUE DE CHOC ELECTRIQUE  
NE PAS OUVRIR  
The lightning flash with arrowhead symbol, within an equilateral  
triangle, is intended to alert the user to the presence of uninsulated  
“dangerous voltage” within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to persons.  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
The exclamation point within an equilateral triangle is intended to  
alert the user to the presence of important operating and maintenance  
(servicing) instructions in the literature accompanying the appliance.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance  
with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat reg-  
isters, stoves, or other apparatus (including amplifiers) that pro-  
duce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug. A polarized plug has two blades with one wider than  
the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong are pro-  
vided for your safety. If the provided plug does not fit into your  
outlet, consult an electrician for replacement of the obsolete  
outlet.  
10. Protect the power cord from being walked on or pinched partic-  
ularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus.  
15. Damage Requiring Service  
Unplug the apparatus from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
A. When the power-supply cord or plug is damaged,  
B. If liquid has been spilled, or objects have fallen into the  
apparatus,  
C. If the apparatus has been exposed to rain or water,  
D. If the apparatus does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper adjust-  
ment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore  
the apparatus to its normal operation,  
E. If the apparatus has been dropped or damaged in any way,  
and  
F. When the apparatus exhibits a distinct change in perfor-  
mance this indicates a need for service.  
16. Object and Liquid Entry  
Never push objects of any kind into the apparatus through  
openings as they may touch dangerous voltage points or short-  
out parts that could result in a fire or electric shock.  
The apparatus shall not be exposed to dripping or splashing and  
no objects filled with liquids, such as vases shall be placed on  
the apparatus.  
11. Only use attachments/accessories specified by the manufac-  
turer.  
12. Use only with the cart, stand, tripod,  
Don’t put candles or other burning objects on top of this unit.  
PORTABLE CART WARNING  
17. Batteries  
bracket, or table specified by the manu-  
facturer, or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination  
to avoid injury from tip-over.  
Always consider the environmental issues and follow local reg-  
ulations when disposing of batteries.  
18. If you install the apparatus in a built-in installation, such as a  
bookcase or rack, ensure that there is adequate ventilation.  
Leave 20 cm (8") of free space at the top and sides and 10 cm  
(4") at the rear. The rear edge of the shelf or board above the  
apparatus shall be set 10 cm (4") away from the rear panel or  
wall, creating a flue-like gap for warm air to escape.  
13. Unplug this apparatus during lightning  
S3125A  
storms or when unused for long periods  
of time.  
14. Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way,  
such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not operate nor-  
mally, or has been dropped.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
FCC INFORMATION FOR USER  
CAUTION:  
The user changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s authority  
to operate the equipment.  
DANGER:  
VISIBLE AND INVISIBLE LASER RADIATION WHEN  
OPENAND INTERLOCK FAILED OR DEFEATED. DO NOT  
STARE INTO BEAM.  
CAUTION:  
THIS PRODUCT UTILIZESA LASER. USE OF CONTROLS  
OR ADJUSTMENTS OR PERFORMANCE OF PROCE-  
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION EXPOSURE.  
NOTE:  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protec-  
tion against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communi-  
cations. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of  
the following measures:  
This unit contains a semiconductor laser system and is classified  
as a “CLASS 1 LASER PRODUCT.” So, to use this model prop-  
erly, read this Instruction Manual carefully. In case of any trou-  
ble, please contact the store where you purchased the unit. To  
prevent exposure to the laser beam, do not try to open the enclo-  
sure.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for  
help.  
In some cases, this label is located on the rear panel. It indicates  
that:  
1. This unit is a CLASS 1 LASER PRODUCT and employs a  
laser inside the cabinet.  
2. To prevent the laser from being exposed, do not remove the  
cover. Refer servicing to qualified personnel.  
For Canadian model  
For models having a power cord with a polarized plug:  
For U.S. model  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH  
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
The laser is covered by a housing which prevents exposure dur-  
ing operation or maintenance. However, this product is classi-  
fied as a Laser Product by CDRH (Center for Devices and  
Radiological Health) which is a department of the Food and  
Drug Administration.  
NOTE:This Class B digital apparatus complies with Canadian  
ICES-003.  
According to their regulations 21 CFR section 1002.30, all man-  
ufactures who sell Laser Products must maintain records of writ-  
ten communications between the manufacturer, dealers and  
customers concerning radiation safety. If you have any com-  
plaints about instructions or explanations affecting the use of  
this product, please feel free to write to the address on the back  
page of this manual. When you write us, please include the  
model number and serial number of your unit.  
Modèle canadien  
Sur les modèles dont la fiche est polarisée:  
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-  
TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE  
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA  
PRISE ET POUSSER JUSQU’AU FOND.  
REMARQUE: CET APPAREIL NUMÉRIQUE DE LA  
CLASSE B EST CONFORME À LA NORME NMB-003 DU  
CANADA.  
In compliance with Federal Regulations, the certification, iden-  
tification and the period of manufacture are indicated on the rear  
panel.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions—Continued  
1. Region Numbers  
8. Care  
The DVD standard uses region numbers to control how discs can  
be played around the world, the world being divided into six  
regions. This unit will only play DVD discs that match its region  
Occasionally, you should dust this unit all over with a soft cloth.  
For stubborn stains, use a soft cloth dampened with a weak solu-  
tion of mild detergent and water. Dry the unit immediately after-  
wards with a clean cloth. Do not use abrasive cloths, thinners,  
alcohol, or other chemical solvents, because they may damage  
the finish or remove the panel lettering.  
number, which can be found on its rear panel (e.g.,  
).  
2. About this Manual  
This manual explains how to use all of this unit’s functions.  
Although the DVD standard offers many special features, not all  
discs use them all, so depending on the disc being played, this  
unit may not respond to certain functions. See the disc’s sleeve  
notes for supported features.  
9. Handling Notes  
• If you need to transport this unit, use the original packaging to  
pack it how it was when you originally bought it.  
• Do not use volatile liquids, such as insect sprays, near this  
unit. Do not leave rubber or plastic items on this unit for a long  
time, because they may leave marks on the case.  
• This unit’s top and rear panels may get warm after prolonged  
use. This is normal.  
When you attempt to use a DVD feature that is not  
available, this logo may appear onscreen, indicating  
that the feature is not supported by the current disc or  
this unit.  
• When you’ve finished using this unit, remove all discs and  
turn off the power.  
3. Warranty  
• If you do not use this unit for a long time, it may not work  
properly the next time you turn it on, so be sure to use it occa-  
sionally.  
If you need to use the warranty, please provide the serial number  
printed on this unit’s rear panel.  
4. Recording Copyright  
Unless it’s for personal use only, recording copyrighted material  
is illegal without the permission of the copyright holder.  
10.To Obtain a Clear Picture  
This unit is a high-tech, precision device. If the lens on the opti-  
cal pickup, or the disc drive mechanism becomes dirty or worn,  
the picture quality may be affected. To maintain the best picture  
quality, we recommend regular inspection and maintenance  
(cleaning or worn part replacement) every 1,000 hours of use  
depending on the operating environment. Contact your Onkyo  
dealer for details.  
5. Power  
WARNING  
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,  
READ THE FOLLOWING SECTION CAREFULLY.  
AC outlet voltages vary from country to country. Make sure that  
the voltage in your area meets the voltage requirements printed  
on this unit’s rear panel (e.g., AC 120 V, 60 Hz).  
11. Moisture Condensation  
Moisture condensation may damage this unit.  
Read the following carefully:  
6. Never Touch this Unit with Wet Hands  
When you take a glass containing a cold drink outside on a sum-  
mer’s day, drops of water, called condensation, form on the out-  
side of the glass. Similarly, moisture may condense on the lens  
of the optical pickup, one of the most important parts inside this  
unit.  
Never handle this unit or its power cord while your hands are  
wet or damp. If water or any other liquid gets inside this unit,  
have it checked by your Onkyo dealer.  
7. Installing this Unit  
• Moisture condensation can occur in the following situations:  
— The unit is moved from a cold place to a warm place.  
• Install this unit in a well-ventilated location.  
Ensure that there’s adequate ventilation all around this unit,  
especially if it’s installed in an audio rack. If the ventilation is  
inadequate, the unit may overheat, leading to malfunction.  
— A heater is turned on, or cold air from an air conditioner is  
hitting the unit.  
• Do not expose this unit to direct sunlight or heat sources,  
because its internal temperature may rise, shortening the life  
of the optical pickup.  
— In the summer, when this unit is moved from an air condi-  
tioned room to a hot and humid place.  
— The unit is used in a humid place.  
• Avoid damp and dusty places, and places subject to vibrations  
from loudspeakers. Never put the unit on top of, or directly  
above a loudspeaker.  
• Install this unit horizontally. Never use it on its side or on a  
sloping surface, because it may cause a malfunction.  
• If you install this unit near aTV, radio, orVCR, the picture and  
sound quality may be affected. If this occurs, move this unit  
away from the TV, radio, or VCR.  
• Do not use this unit when there’s the possibility of moisture  
condensation occurring. Doing so may damage your discs and  
certain parts inside this unit.  
If condensation does occur, remove all discs and leave this  
unit turned on for two to three hours. By this time, the unit will  
have warmed up and any condensation will have evaporated.  
To reduce the risk of condensation, keep this unit connected to  
a wall outlet.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Supplied Accessories  
DV-CP702 Features  
Make sure you have the following accessories:  
Highlights  
*1  
*2  
• Dolby Digital and DTS  
• Holds up to six discs  
• Chain mode for successive disc playback  
• DVD-Video playback  
• Video CD playback  
• Audio CD playback  
*3  
Remote controller (RC-542DV) & 2 batteries (AA)  
• MP3/WMA playback  
• JPEG picture display and slideshow  
• CD-R, CD-RW (Video CD, audio CD, MP3/WMA/JPEG)  
• DVD-R, DVD-RW (DVD-Video)  
• Direct digital path for signal purity  
Vector Linear Shaping Circuitry  
Video  
AV connecting cable (RCA/phono)  
S-Video connecting cable  
• Advanced 54 MHz/10-bit video D/A converter  
• Component video output  
• S-Video and composite video outputs  
• Title, chapter, track, or time search  
• Pause/Still setting for enhanced display of single frames  
• Frame-by-frame playback  
• Slow motion playback (four speeds)  
• Fast forward and reverse (five speeds)  
• Last Memory function allows you to resume playback from a  
specific point on a DVD-Video disc or Video CD, even if that  
disc has been removed from the DV-CP702  
• Repeat playback options include: Chapter, Title, 1 Disc, All  
Discs, Track, and Folder (MP3/WMA)  
• Random playback options include: Title, 1 Disc, All Discs,  
and Folder (MP3/WMA)  
cable  
• Supports 4:3 and 16:9 aspect ratio TVs  
• Supports up to 8 soundtracks/languages  
• Supports up to 32 subtitle languages  
• Multiple camera angle support  
Coaxial digital cable (U.S. model only)  
• Parental Lock function  
• Screen Saver function  
Audio  
• Audiophile-class performance  
• Direct digital path  
• 192 kHz/24-bit D/A converter  
• Coaxial digital output  
• Optical digital output  
• Analog output  
Others  
• Load discs without stopping playback  
• Dynamic Range Control setting  
• Adjustable display brightness  
*1. Manufactured under license from Dolby Laboratories. “Dolby” and the  
double-D symbol are trademarks of Dolby Laboratories.  
*2. “DTS” is a trademark of Digital Theater Systems, Inc.  
*3.  
Windows Media, and the Windows logo are trademarks,  
or registered trademarks of Microsoft Corporation in the  
United States and/or other countries.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction—Continued  
DVD Region Numbers  
Disc Notes  
The NorthAmerican DV-CP702 supports only Region 1  
DVD-Video discs bearing this logo.  
1
4
Supported Discs  
The DV-CP702 supports the following discs.  
The Australian DV-CP702 supports only Region 4  
DVD-Video discs bearing this logo.  
Disc  
Logo  
Format or file type  
If you attempt to play a disc intended for another region, the  
message “Cannot play discs with this region code” appears  
onscreen.  
*1  
DVD-Video  
DVD-R  
DVD-Video  
Function Support  
The following icons are used throughout this manual to indicate  
which functions can be used with the various disc formats and  
file types.  
DVD-RW  
Video CD  
DVD-Video  
Icon  
Disc format or file type  
Version 1.1 and 2.0  
PCM and DTS  
DVD  
DVD-Video  
*2  
VCD  
CD  
Video CD  
Audio CD  
MP3 file  
Audio CD  
Video CD, audio CD,  
MP3, WMA, JPEG  
*3  
CD-R  
MP3  
WMA  
JPEG  
WMA file  
JPEG file  
Video CD, audio CD,  
MP3, WMA, JPEG  
CD-RW  
JPEG CD  
JPEG  
Unsupported DVD Features  
*1. The NorthAmerican model will only play Region 1, NTSC DVD-Video  
discs. The Australian model will only play Region 4, PAL DVD-Video  
discs, although it can be set to AUTO, in which case it will also play  
Region 4 NTSC DVD-Video discs (see page 39).  
*2. Some audio CDs feature copy protection that doesn’t conform to the  
official CD standard. Since these are nonstandard discs, they may not  
play properly in the DV-CP702.  
*3. The DV-CP702 supports CD-R and CD-RW discs recorded inVideo CD  
format, audio CD format, or ISO9660 Level 2 format with MP3, WMA,  
and JPEG files. It also supports DVD-R and DVD-RW discs recorded  
in DVD-Video format. However, some CD-R, CD-RW, DVD-R, and  
DVD-RW discs may not work properly for any of the following reasons:  
incomplete disc finalization, disc burner characteristics, disc character-  
istics, the disc is damaged or dirty. See the manual supplied with your  
disc burner for more information. Condensation or dirt on the optical  
pickup lens can also affect playback.  
The DVD standard offers many special features,  
including multiple soundtracks, subtitles, camera  
angles, and so on. However, not all discs employ all of  
these features. When you attempt to use a feature that is not used  
by the current disc, for example, you press the remote control-  
ler’s [AUDIO] button while playing a disc with only one  
soundtrack, this icon will appear onscreen, indicating that the  
feature is not supported by the current disc.  
Similarly, if a disc uses features that are not supported  
by the DV-CP702, for example, special interactive  
menu functions, this icon will appear onscreen, indicat-  
ing that the feature is not supported by the DV-CP702.  
Disc Content Organization  
• The DV-CP702 does not support disc types not listed.  
• The DV-CP702 does not support the following disc types even  
if they bear one of the logos shown above: DVD-RAM,  
DVD+R, DVD+RW, DVD Audio, Super Audio CD, Photo  
CD, CD-G.  
• The DV-CP702 supports 8 cm and 12 cm discs.  
• Don’t use discs with an unusual shape, such as those shown  
below, because you may damage the DV-CP702.  
DVD-Video Format  
DVD-Video discs contain titles, which are usually subdivided  
into chapters.  
Title 1  
Title 2  
Chapter 1  
Chapter 2  
Chapter 1  
Chapter 2  
DVD-Video  
Video CD Format  
Video CDs contain tracks.  
Track 1  
Track 2  
Track 3  
Track 4  
• Don’t use discs that have residue from adhesive tape, rental  
discs with peeling labels, or discs with custom-made labels or  
stickers. Doing so may damage the DV-CP702 and you may  
not be able to remove the disc properly.  
Video CD  
About playing copy-controlled CDs  
Some copy-controlled CDs may not conform to official CD stan-  
dards. They are special discs and may not play on the DV-  
CP702.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction—Continued  
Audio CD Format  
MP3  
Audio CDs contain tracks.  
• MP3 files must be MPEG1 Audio Layer 3 format, 44.1 or  
48 kHz, fixed bit-rate.  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
• MP3 files must have a “.mp3” or “.MP3” filename extension.  
Variable bit-rates (VBR) from 64 kbps to 384 kbps are sup-  
ported. (Playing times may display incorrectly with VBR.)  
Audio CD  
WMA  
MP3/WMA Files  
• WMA files must have the copyright option turned off.  
• Sampling rates 44.1/48 kHz are supported.  
Variable bit-rates (VBR) from 16 kbps to 192 kbps are sup-  
ported. (Playing times may display incorrectly with VBR.)  
• WMA files must have a “.wma” or “.WMA” or “.ASF” file-  
name extension.  
MP3 and WMA files are typically organized into folders. The  
DV-CP702 handles MP3 and WMA files as tracks.  
Folder 1  
Track 2  
Folder 2  
Track 1  
Track 3  
Track 1 Track 2  
JPEG  
MP3/WMA (CD-R/CD-RW)  
• JPEG files must have a “.jpg” or “.JPG” or “.JPEG” filename  
extension.  
JPEG Files  
JPEG picture files are typically organized into folders. The DV-  
CP702 handles JPEG files as tracks.  
• Baseline JPEG files are supported. Progressive JPEG files are  
not.  
• Only JPEG files with the following brightness/color differ-  
ence ratios are supported: 4:4:4, 4:2:2, and 4:1:1.  
• JPEG files must be less than 5 megabytes in size.  
Folder 1  
Track 2  
Folder 2  
Track 1 Track 2  
Track 1  
Track 3  
Handling Discs  
JPEG (CD-R/CD-RW)  
• Never touch the underside of a disc. Always hold discs by the  
edge, as shown.  
Video CDs  
The DV-CP702 supports Version 1.1 and Version 2.0 of the  
Video CD standard. Version 2.0 supports PBC (Playback Con-  
trol).  
Video CD (Version 1.1)  
The contents of Video CDs that conform to Version 1.1 of the  
Video CD standard are played as tracks.  
Underside  
Video CD with PBC (Version 2.0)  
• Never attach adhesive tape or sticky labels to discs.  
In addition to the functions supported by Version 1.1, Version  
2.0 offers playback control via interactive menus and search  
functions. Note that the DV-CP702 doesn’t support all Video  
CD PBC functions.  
MP3/WMA/JPEG Compatibility  
• The DV-CP702 can play/display MP3, WMA, and JPEG files  
recorded on CD-R and CD-RW discs.  
Cleaning Discs  
• For best results, keep your discs clean. Fingerprints and dust  
can affect the sound and picture quality and should be  
• Discs must be in ISO9660 Level 2 format (folders can be up  
to eight levels deep).  
removed as follows. Using a clean soft cloth, wipe from the  
center outwards, as shown. Never wipe in a circular direction.  
• Discs must be finalized.  
• The DV-CP702 can only recognize the first session on multi-  
session discs.  
You can determine the order in which the DV-CP702 plays/  
displays your MP3/WMA songs and JPEG pictures by prefix-  
ing file and folder names with a three-digit number. For exam-  
ple 001.Root, 002.Folder, and so on, and 001.Track.mp3,  
002.Track.mp3, and so on.  
• Only the first eight characters of folder and track names  
(excluding the filename extension) are displayed.  
• The folder numbered “001” appears as “ROOT” in the Disc  
Navigator.  
• The DV-CP702 supports up to 999 folders and up to 672 files  
per folder.  
• To remove stubborn dust or dirt, wipe the disc with a damp  
soft cloth, and then dry it with a dry cloth.  
• Never use solvent-based cleaning fluids, such as thinner or  
benzine, commercially available cleaners, or antistatic sprays  
intended for vinyl records, because they may damage the disc.  
• If you try to play an incompatible file, the message “This for-  
mat cannot be played” appears on the display.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction—Continued  
DVD-RW (DVD rewritable): A type of DVD disc that can be  
recorded many times. Can be used to make DVD-Video discs or  
to store computer data.  
Storing Discs  
• Don’t store discs in places subject to direct sunlight, or near  
heat sources.  
• Don’t store discs in places subject to moisture or dust, such as  
in a bathroom or near a humidifier.  
• Always store discs in their cases and vertically. Stacking, or  
putting objects on unprotected discs may cause warping,  
scratches, or other damage.  
DVD-Video: The format for storing movies on DVD, with  
interactive menus, multiple language soundtracks, subtitles,  
camera angles, and so on.  
Field: In interlaced scanning, a field is a single scan of the  
screen. There are two fields per frame.  
Frame: An individual TV picture is called a frame. With the  
NTSC color system there are 30 frames per second.  
Copyright  
It is forbidden by law to copy, broadcast, show, broadcast on  
cable, play in public, or rent copyrighted material without per-  
mission.  
Interlaced scanning: TV pictures are made by scanning  
the screen in horizontal lines from top to bottom.With Interlaced  
scanning, two scans (fields) are used to make each picture  
(frame). Contrast with Progressive scanning.  
DVD-Video discs are copy-protected, and any recordings made  
from these discs will be distorted.  
JPEG (Joint Photographic Experts Group): The com-  
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright-protection tech-  
nology must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only, unless  
otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
pressed file format used to store digital photos.  
LFE (low-frequency effects): The surround-sound chan-  
nel used for low-frequency effects.  
Linear PCM: The uncompressed digital audio format used  
for audio CDs. PCM stands for Pulse Code modulation.  
MP3 (MPEG 1 Audio Layer 3): Popular compressed file  
format for storing digital music.  
MPEG1 (Moving Picture Experts Group 1): The com-  
pressed digital video format used for Video CDs.  
DV-CP702-related Terminology  
MPEG2 (Moving Picture Experts Group 2): The com-  
pressed digital video format used for DVD-Videos, offering bet-  
ter picture quality than MPEG1.  
CD-R (compact disc recordable): A type of CD that can  
be recorded only once. Can be used to make Video-CDs, audio  
CDs, or MP3/WMA/JPEG discs.  
NTSC: The color TV system used in the United States,  
Japan, Taiwan, and Korea.  
CD-RW (compact disc rewritable): A type of CD that can  
be recorded many times. Can be used to makeVideo-CDs, audio  
CDs, MP3/WMA/JPEG discs.  
PAL: The color TV system used in most of Europe, the  
United Kingdom, Australia, Brazil, and China.  
Chapter: Titles on DVD-Video discs can be subdivided into  
chapters.  
PBC (Playback Control): Version 2.0 of the Video CD  
standard supports interactive menus and search functions.  
Component video: A video connection format that sepa-  
rates the luminance (Y) and color difference signals (PR, PB),  
providing better picture quality than S-Video.  
Progressive scanning: TV pictures are made by scanning  
the screen in horizontal lines from top to bottom. With progres-  
sive scanning, each picture (frame) is made by scanning the  
entire screen in one go, resulting is a clearer and stabler picture.  
Contrast with Interlaced scanning.  
Composite video: A video connection format that mixes  
the luminance and color signals together.  
Dolby Digital: The multi-channel digital surround sound  
format used on most DVD-Videos.  
S-Video: A video connection format that separates the lumi-  
nance (Y) and color (C) signals, providing better picture quality  
than composite video.  
Dolby Pro Logic: The four-channel analog surround sound  
format that can be encoded in normal stereo soundtracks and  
used withVHS video cassettes, analog TV broadcasts, and other  
analog stereo systems.  
Title: Movies on DVD-Video are called titles.  
Video CD: The format for storing movies on CD.  
Downmixing: The process of mixing multiple audio chan-  
nels into fewer channels. For example, a 5.1-channel surround  
mix can be downmixed into two channels for reproduction on  
stereo systems.  
WMA (Windows Media Audio): A compressed file format  
for storing digital music.  
Downsampling: The process of reducing the sampling rate  
of digital audio.  
DTS (Digital Theater System): The 5.1-channel surround  
format that uses less compression for faithful reproduction.  
DVD-R (DVD recordable): A type of DVD disc that can be  
recorded only once. Can be used to make DVD-Video discs or  
to store computer data.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Connectors  
Front Panel  
A
B
C
D
E
F
G
DV-CP702  
J
L
M NO P Q R S  
H I  
K
For detailed information, refer to the pages in parenthesis.  
J DISPLAY button (37)  
This button is used to display information about the cur-  
rent disc, title, chapter, or track, including the elapsed  
time, remaining time, total time, and so on.  
A STANDBY/ON button (20)  
This button is used to set the DV-CP702 to On or  
Standby.  
Don’t turn on the power until you’ve completed, and  
double checked all connections (page 16).  
K REPEAT button (31)  
This button is used with the Repeat function.  
B STANDBY indicator (20)  
This indicator lights up when the DV-CP702 is in  
Standby mode.  
L Display  
See “Display” on page 11 for more information.  
M Remote control sensor (15)  
This sensor receives control signals from the remote  
controller.  
C Disc tray (21)  
The disc tray has six bays for loading up to six discs.  
D Disc tray light  
N Previous [ ] button (25, 28)  
This button is used to select the previous chapter or  
track. During playback it selects the beginning of the  
current chapter or track.  
This light illuminates the disc tray. It comes on when the  
DV-CP702 is turned on, and is brighter while the disc  
tray is open.  
E DISC SKIP button (21, 22)  
O Next [ ] button (25, 28)  
This button is used to select the disc bays (i.e., rotate the  
disc tray) when loading or removing discs, and to select  
discs for playback.  
This button is used to select the next chapter or track.  
P PAUSE [ ] button (22)  
This button is used to pause playback.  
F DISC SELECT 1–6 buttons (22)  
Q CHAIN MODE button (30)  
These buttons are used to select discs. Playback starts  
automatically when a disc is selected with these buttons.  
This button is used with the Chain mode function.  
R STOP [ ] button (22)  
G Open/Close [ ] button (21)  
This button is used to stop playback.  
This button is used to open and close the disc tray.  
S PLAY/ENTER [ ] button (22)  
This button is used to start playback and to cancel fast  
forward and fast reverse. It’s also used to start Chain  
mode playback.  
H LAST MEMORY button (36)  
This button is used with the Last Memory function.  
I DIMMER button (29)  
This button is used to adjust the display brightness.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Connectors—Continued  
Display  
1
2
3
4 5 6 7 8 9 0 A B  
C
CHAIN MODE DISC  
ALL  
DVD  
TITLE  
CHP TRACK  
PRGV LAST  
TOTAL REMAIN  
1
4
2
5
3
6
CD  
VCDVD  
D
E
F
For detailed information, refer to the pages in parenthesis.  
C Disc indicators 1–6 (21)  
These indicators show how many discs are loaded. The  
number of the current disc has a circle around it.  
When the disc tray is closed, all of the disc indicators  
appear until the DV-CP702 has checked each bay for the  
presence of a disc. If a bay is found to have no disc, the  
corresponding indicator disappears.  
1 CHAIN MODE, ALL, DVD & CD indicators (30)  
The CHAIN MODE indicator appears when the Chain  
mode function is on. The ALL, DVD, and CD indicators  
show the type or Chain mode selected.  
2 DISC indicator (22)  
The number of the currently selected disc appears here.  
D Chapter & track number  
3 TITLE indicator (22)  
Chapter and track numbers appears here.  
While stopped, the total number of titles on the current  
DVD-Video disc is displayed here. During playback, the  
number of the current title is displayed.  
E Time display  
Time information, such as total time, remaining time,  
and so on, is displayed here in hours, minutes, and sec-  
onds. Other messages are also displayed.  
4 CHP indicator  
This indicator appears while the number of the current  
chapter is being displayed.  
F VCDVD indicator  
This indicator shows the type of disc currently selected:  
DVD: DVD-Video, DVD-R, or DVD-RW  
VCD: Video CD  
5 TRACK indicator  
This indicator appears while track numbers are being  
displayed. While stopped, the total number of tracks on  
the current Video CD, audio CD, or MP3/WMA disc are  
displayed. During playback, the number of the current  
track is displayed.  
CD: Audio CD, MP3/WMA/JPEG CD-R, or CD-RW  
6 PRGV indicator (35)  
This indicator appears when the Progressive Scanning  
function is on.  
7 LAST indicator (36)  
This indicator appears when the Last Memory function  
has been set.  
8 TOTAL indicator (37)  
This indicator appears while the total time is being dis-  
played.  
9 REMAIN indicator (37)  
This indicator appears while the remaining time is being  
displayed.  
0 Camera angle indicator (34)  
This indicator appears if the DVD-Video disc being  
played features multiple camera angles.  
A Play indicator (22)  
This indicator is shown during playback.  
B Pause indicator (10)  
This indicator appears when playback is paused.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Connectors—Continued  
Rear Panel  
1 2 345  
6
VIDEO OUTPUT  
OPTICAL  
COAXIAL  
Y
PB  
PR  
AUDIO  
OUTPUT  
DIGITAL  
S
VIDEO  
COMPONENT  
VIDEO  
DVD CHANGER  
REMOTE  
CONTROL  
L
-
MODEL NO. DV CP702  
AUDIO  
OUTPUT  
ANALOG  
R
7
8
For detailed information, refer to the pages in parenthesis.  
A COMPONENT VIDEO OUTPUT (17)  
These RCA/phono connectors can be used to connect a  
TV or projector with component video inputs.  
B S VIDEO OUTPUT (17)  
This connector can be used to connect a TV or projector  
with an S-Video input.  
C VIDEO OUTPUT (17)  
This RCA/phono connector can be used to connect a TV  
or projector with a composite video input.  
D OPTICAL AUDIO OUTPUT (18)  
This optical digital audio output can be connected to an  
optical digital audio input on a hi-fi amp, AV receiver, or  
surround sound decoder (Dolby Digital, DTS).  
E COAXIAL AUDIO OUTPUT (18)  
This coaxial digital audio output can be connected to an  
coaxial digital audio input on a hi-fi amp, AV receiver, or  
surround sound decoder (Dolby Digital, DTS).  
F Power cord (20)  
This power cord should be connected to a suitable wall  
outlet.  
G ANALOG AUDIO OUTPUT (17, 18)  
These RCA/phono connectors can be connected to ana-  
log audio inputs on a hi-fi amp, AV receiver, or surround  
sound decoder (Dolby Pro Logic).  
H
REMOTE CONTROL (19)  
These (Remote Interactive) connectors can be con-  
nected to the connectors on your other Onkyo AV  
components for interactive control.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Connectors—Continued  
For detailed information, refer to the pages in parenthesis.  
Remote Controller  
A STANDBY button (20)  
This button is used to set the DV-CP702 to Standby.  
B ON button (20)  
This button is used to turn on the DV-CP702.  
Don’t turn on the DV-CP702 until you’ve completed,  
and double checked all connections (page 16).  
N
1
2
ON STANDBY  
OPEN/  
CLOSE  
C SEARCH button (25, 28, 31)  
This button is used to search for titles, chapters, tracks,  
and specific points in time.  
O
P
SEARCH LAST M MEMORY CHAIN MODE  
REPEAT  
3
4
1
4
7
2
5
8
0
3
Q
R
S
T
D LAST M button (36)  
-
A
B
This button is used with the Last Memory function.  
6
5
RANDOM  
DISPLAY  
E Number buttons (25, 28, 31)  
9
These buttons are used to enter title, chapter, and track  
numbers and to enter times for locating specific points in  
time.  
To enter a single-digit number, simply press the corre-  
sponding button. To enter a double-digit number, enter  
the numbers in order from left-to-right (e.g., to enter 14,  
press [1] then [4].  
The [+10] button is used to enter multiples of ten (i.e.,  
10, 20, 30, and so on). For example, to enter the number  
25, press the [+10] button twice followed by the [5] but-  
ton.  
+
10  
CLEAR  
U
TOP MENU  
MENU  
V
6
7
W
X
ENTER  
RETURN  
SETUP  
Y
AUDIO ANGLE SUBTITLE ZOOM  
8
9
Z
a
b
c
J
K
d
e
F TOP MENU button (24)  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
This button is used to select the top menu.  
L
f
G RETURN button (39)  
This button is used to exit the onscreen setup menu and  
to restart menu playback.  
DISC SKIP PROGRESSIVE DIMMER  
g
h
M
H AUDIO button (35)  
RC-542DV  
This button is used to select foreign language  
soundtracks and audio formats (e.g., Dolby Digital or  
DTS).  
I ANGLE button (34)  
This button is used to select different camera angles.  
J Fast Forward [ ] button (28)  
This button is used to start fast forward.  
K Fast Reverse [ ] button (28)  
This button is used to start fast reverse.  
L DISC 1–6 buttons (22)  
These buttons are used to select discs. Playback starts  
automatically when a disc is selected with these buttons.  
M DISC SKIP button (21, 22)  
This button is used to select the disc bays (i.e., rotate the  
disc tray) when loading or removing discs, and to select  
discs for playback.  
N MEMORY button (33)  
This button is used with the Memory Playback function.  
O OPEN/CLOSE [ ] button (21)  
This button is used to open and close the disc tray.  
P CHAIN MODE button (30)  
This button is used with the Chain mode function.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Connectors—Continued  
Q REPEAT button (31)  
This button is used to set the Repeat Playback functions.  
R A–B button (32)  
This button is used to set the A–B Repeat Playback func-  
tion.  
S RANDOM button (32)  
This button is used with the Random Playback function.  
T DISPLAY button (37)  
This button is used to display information about the cur-  
rent disc, title, chapter, or track, including the elapsed  
time, remaining time, total time, and so on.  
U CLEAR button  
This button is used to cancel various functions.  
V MENU button (24)  
This button is used to select the menu.  
W ENTER button  
This button is used to start playback of the selected title  
chapter, or track and to confirm settings.  
X [ ], [ ], [ ], [ ] buttons  
These buttons are used to navigate DVD-Video menus  
and the onscreen setup menus.  
Y SETUP button (39)  
This button is used to open and close the onscreen setup  
menus.  
Z SUBTITLE button (35)  
This button is used to select subtitles.  
a Play [ ] button (22)  
This button is used to start playback.  
b Pause [ ] button (22)  
This button is used to pause playback.  
c Stop [ ] button (22)  
This button is used to stop playback.  
d Previous [ ] button (25, 28)  
This button is used to select the previous chapter or  
track. During playback it selects the beginning of the  
current chapter or track.  
e Next [ ] button (25, 28)  
This button is used to select the next chapter or track.  
f STEP/SLOW [+] & [–] buttons (29)  
These buttons are used with the Frame-by-Frame Play-  
back and Slow Motion Playback functions.  
g DIMMER button (29)  
This button is used to adjust the display brightness.  
h PROGRESSIVE button (35)  
This button is used to turn on and off the Progressive  
Scanning function. Progressive scanning can’t be turned  
on or off during playback.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Using the DV-CP702  
Installing the Remote Controller’s  
Batteries  
Using the Remote Controller  
To use the remote controller, point it at the DV-CP702’s  
remote control sensor, as shown below.  
Open the battery compartment, as shown.  
1
Remote control sensor  
DV-CP702  
Insert the two supplied batteries (AA) in  
accordance with the polarity diagram inside  
the battery compartment.  
2
30˚  
30˚  
Close the battery compartment.  
3
Notes:  
• The remote controller may not work reliably if the DV-  
CP702 is subjected to bright light, such as direct sunlight  
or inverter-type fluorescent lights. Keep this in mind when  
installing the DV-CP702.  
• If another remote controller of the same type is used in the  
same room, or the DV-CP702 is installed close to equip-  
ment that uses infrared rays, the remote controller may not  
work reliably.  
Notes:  
• The supplied batteries should last for about six months,  
although this will vary with usage.  
• Don’t put anything, such as a book, on the remote control-  
ler, because the buttons may be pressed inadvertently,  
thereby draining the batteries.  
• If the remote controller doesn’t work reliably, try replacing  
both batteries.  
• Don’t mix new and old batteries, or different types of bat-  
teries.  
• The remote controller may not work reliably if the DV-  
CP702 is installed in a rack behind colored glass doors.  
Keep this in mind when installing the DV-CP702.  
• If you intend not to use the remote controller for a long  
time, remove the batteries to prevent possible leakage and  
corrosion.  
• The remote controller will not work if there’s an obstacle  
between it and the DV-CP702’s remote control sensor.  
• Flat batteries should be removed as soon as possible to pre-  
vent possible leakage and corrosion.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DV-CP702  
This chapter explains how to connect the DV-CP702 to your  
other AV components.  
RCA/phono AV Connection Color Coding  
RCA/phono AV connections are usually color coded: red,  
white, and yellow. Use red plugs to connect right-channel  
audio inputs and outputs (typically labeled “R”). Use white  
plugs to connect left-channel audio inputs and outputs (typi-  
cally labeled “L”). And use yellow plugs to connect compos-  
ite video inputs and outputs.  
Before Making Any Connections  
• Read the manuals supplied with your AV components.  
• Don’t connect the power cord until you’ve completed all  
audio and video connections.  
Right (red)  
Left (white)  
Right (red)  
Left (white)  
Optical Digital Inputs  
Analog audio  
The DV-CP702’s optical digital connector  
has a dust cap for keeping out dust and dirt  
when it’s not in use. Remove the cap before  
inserting an optical digital plug. Push the  
plug in all the way to make a good connec-  
tion. Keep the dust cap in a safe place for  
future use.  
Composite video  
(Yellow)  
(Yellow)  
Right!  
• Push the plugs in all the way to make  
a good connection.  
• To prevent interference, keep audio  
and video cables away from power  
cords and speaker cables.  
Wrong!  
AV Cables & Connectors  
Video  
P
R
/CR  
P
R
/ CR  
Component video separates the luminance (Y) and color  
difference signals (PR, PB), providing the best picture  
quality. (Some TV manufacturers label their component  
video inputs slightly differently.)  
Y
PB  
PR  
Component  
video  
/
/
PB  
C
B
PB  
C
B
Y
Y
S VIDEO  
VIDEO  
S-Video provides better picture quality than composite  
video.  
S-Video  
Composite video can be found on virtually all TVs,  
VCRs, and other video equipment. Use only dedicated  
composite video cables.  
Composite  
video  
Audio  
Optical digital audio connections with the optical digital  
audio output and a suitable AV receiver, you can enjoy  
DVD-Videos with surround sound.  
OPTICAL  
Optical digital  
Coaxial digital audio connections with the coaxial digi-  
tal audio output and a suitable AV receiver, you can  
enjoy DVD-Videos with surround sound.  
COAXIAL  
AUDIO  
Coaxial digital  
Analog  
RCA/phono analog audio connectors can be found on  
virtually all AV components.  
L
R
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DV-CP702—Continued  
ConnectingYour TV or Projector  
This section explains how to connect the DV-CP702 to your  
TV or projector.  
S-Video offers better picture quality than composite video,  
so if your TV supports it, use the supplied S-Video cable to  
connect the DV-CP702’s S VIDEO output to an S-Video  
input on your TV. Failing that, use the supplied composite  
video cable to connect the DV-CP702’s VIDEO output to a  
composite video input on your TV.  
In this hookup example, the TV handles the audio and video.  
If your TV has a Dolby Pro Logic decoder built-in, you’ll be  
able to enjoy DVDs and videos that bear the Dolby Surround  
logo.  
To enjoy Dolby Digital or DTS (5.1-channel surround),  
you’ll need a compatible decoder (see page 18).  
Turn off the DV-CP702 and your TV, and dis-  
connect their power cords from the wall out-  
lets.  
1
The DV-CP702 has three types of video output: component  
video, S-Video, and composite video. Component video  
offers the best picture quality, so if your TV supports it, use  
a commercially available component video cable to connect  
the DV-CP702’s COMPONENT video output to the compo-  
nent video inputs on your TV. If your TV supports progres-  
sive scanning, you must use component video in order to take  
advantage of that feature.  
Connect the DV-CP702 to your TV as shown.  
2
When you’ve completed all connections,see  
“Powering Up & Setting Up the DV-CP702”  
on page 20.  
3
TV or projector  
IN  
L
Y
R
VIDEO IN  
ANALOG  
INPUT  
S VIDEO IN  
(red)  
PB  
PR  
(white)  
(yellow)  
Component video  
cable  
S-Video cable  
(supplied)  
AV RCA/phono  
cable (supplied)  
(red)  
Only one connection required!  
Choose component video,  
S-Video, or composite video.  
(white)  
(yellow)  
VIDEO OUTPUT  
OPTICAL  
COAXIAL  
Y
P
B
PR  
AUDIO  
OUTPUT  
DIGITAL  
S
VIDEO  
COMPONENT  
VIDEO  
DVD CHANGER  
REMOTE  
CONTROL  
L
-
MODEL NO. DV CP702  
AUDIO  
OUTPUT  
ANALOG  
R
picture distortion, because of the copy protection system  
used on DVD-Video discs.  
Notes  
• Before making any connections, turn off the DV-CP702  
and your TV and disconnect their power cords from the  
wall outlets.  
• When you use the analog audio outputs, don’t play DTS  
CDs or don’t select DTS soundtracks on DVD-Video discs.  
Doing so will produce unpleasant digital noise, which may  
damage your equipment.  
• Also refer to the connection information supplied with  
your TV.  
• Connect the DV-CP702’s video outputs directly to your  
TV. Don’t connect a VCR or other video equipment in  
between your DV-CP702 and TV. Doing so may result in  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the DV-CP702—Continued  
Notes:  
ConnectingYour Hi-Fi Amp  
• Be sure to set the Digital Out–>Dolby Digital setting to  
“Dolby Digital>PCM” (see page 41). Otherwise an  
unpleasant digital noise may be heard, which may damage  
your equipment.  
This section explains how to connect the DV-CP702 to a ste-  
reo hi-fi amp or receiver for better sound quality than that of  
most TVs. This is ideal for playing your audio CDs and MP3/  
WMA discs in the DV-CP702. DVD-Video discs and Video  
CDs will sound better too. You can also enjoy Dolby Pro  
Logic, so long as your receiver supports it.  
• Never connect the DV-CP702 to the AC-3RF input on a  
Dolby Digital receiver. The AC-3RF format is not sup-  
ported by the DV-CP702.  
Analog Connection  
Connecting for Dolby Digital or DTS  
Use an RCA/phono audio cable to connect the DV-CP702’s  
ANALOG AUDIO OUTPUTs to a pair of analog audio  
inputs on your hi-fi amp or receiver, as shown.  
To enjoy Dolby Digital or DTS surround sound, you need to  
connect one of the DV-CP702 digital audio outputs to the  
digital input on a Dolby Digital or DTS decoder or an AV  
receiver with built-in decoders.  
Signal flow  
L
This hookup example will also allow you to enjoy Dolby Pro  
Logic, so long as your decoder or AV receiver supports it.  
R
ANALOG  
INPUT  
VIDEO OUTPUT  
(white)  
(white)  
(red)  
OPTICAL  
COAXIAL  
Y
P
B
PR  
AUDIO  
OUTPUT  
DIGITAL  
S
VIDEO  
COMPONENT  
VIDEO  
DVD CHANGER  
RMOTE  
CNTROL  
L
-
MODEL NO. DV CP702  
AUDIO  
OUTPUT  
ANALOG  
RCA/phono cable  
R
(red)  
Signal flow  
OPTICAL  
COAXIAL  
VIDEO OUTPUT  
OPTICAL  
COAXIAL  
Y
P
B
PR  
S
VIDEO  
L
Connect one or the other  
Coaxial  
AUDIO  
COMPONENT  
VIDEO  
OUTPUT  
digital cable  
(Supplied with  
U.S. model only)  
REMOTE  
CONTROL  
L
COAXIAL  
AUDIO  
OUTPUT  
ANALOG  
OPTICAL  
ANALOG  
1
R
R
Notes:  
• When you use the analog audio outputs, don’t play DTS  
CDs or don’t select DTS soundtracks on DVD-Video discs.  
Doing so will produce unpleasant digital noise, which may  
damage your equipment.  
AV component with  
Dolby Digital/DTS decoder  
Notes:  
Digital Connection  
• Make sure that the Digital Out–>Dolby Digital setting to  
“Dolby Digital” (see page 41). Otherwise you won’t get  
surround sound.  
Use an optical (or coaxial) digital audio cable to connect the  
DV-CP702’s OPTICAL (or COAXIAL) DIGITAL AUDIO  
OUTPUT to an optical (or coaxial) input on your hi-fi amp or  
receiver, as shown.  
• Also refer to the connection information supplied with  
your AV receiver or decoder.  
• When playing Dolby Digital or DTS source material, be  
sure to select Dolby Digital or DTS decoding, respectively,  
on your AV receiver or decoder. See the relevant manuals.  
Signal flow  
COAXIAL  
OPTICAL  
You can experience Dolby Digital only with DVDs that  
bear the Dolby Digital logo. Likewise, you can experience  
DTS only with DVDs or CDs that bear the DTS logo.  
Connect one or the other  
OPTICAL  
COAXIAL  
VIDEO OUTPUT  
OPTICAL  
COAXIAL  
Y
P
B
PR  
AUDIO  
OUTPUT  
DIGITAL  
S
VIDEO  
COMPONENT  
VIDEO  
DVD CHANGER  
REMOTE  
CONTROL  
L
-
MODEL NO. DV CP702  
AUDIO  
OUTPUT  
ANALOG  
R
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting -compatible AV Components  
Auto Power Off  
When you set any  
With  
CP702 and other  
(Remote Interactive) you can control your DV-  
-compatible Onkyo AV components  
-compatible Onkyo AV receiver to  
Standby, all other AV components connected via  
Standby as well.  
enter  
together. With some Onkyo AV receivers you can use one  
remote controller to control all your Onkyo components, and  
use the following special  
functions:  
Dimmer  
When you dim the display brightness on an  
Onkyo AV component, the displays on all other AV compo-  
nents connected via are dimmed as well.  
-compatible  
Auto Power On  
If your DV-CP702 is connected to an  
AV receiver, when you turn on the DV-CP702, the AV  
receiver will turn on and select the DV-CP702 as the input  
source.  
-compatible Onkyo  
See the manuals supplied with your other  
components for more information.  
-compatibleAV  
Auto Source Select  
If your DV-CP702 is connected to an  
-compatible Onkyo  
AV receiver, when you start playback on the DV-CP702, the  
AV receiver will select the DV-CP702 as the input source.  
Connection Diagram  
To use the  
functions, you need to connect one of the DV-CP702’s  
connectors to an  
connector on another AV  
component by using an  
cassette recorders.  
cable. An  
cable is supplied with all  
-compatible Onkyo CD players, DVD players, and  
Onkyo AV receiver  
Connecting several  
-compatible  
Onkyo AV components  
REMOTE  
CONTROL  
OPTICAL  
Onkyo AV receiver  
L
REMOTE  
CONTROL  
R
ANALOG  
INPUT  
DIGITAL  
INPUT  
connector  
DV-CP702 DVD Changer  
connector  
To use  
you must  
also make an analog  
RCA/phono connection  
between your DV-CP702  
and Onkyo AV receiver,  
even if they are  
Onkyo cassette  
recorder  
cable  
(Supplied)  
connected digitally.  
VIDEO OUTPUT  
OPTICAL  
COAXIAL  
Y
PB  
PR  
AUDIO  
OUTPUT  
DIGITAL  
S
VIDEO  
COMPONENT  
VIDEO  
Disconnect the power  
cord before making  
any connections!  
DVD CHANGER  
REMOTE  
CONTROL  
L
-
MODEL NO. DV CP702  
AUDIO  
OUTPUT  
ANALOG  
R
• The DV-CP702 has two  
either one to your OnkyoAV receiver. The other connector  
connectors. You can connect  
Notes:  
• Push the plugs in all the way to make a good connection.  
is for connecting additional  
• Connect the DV-CP702’s  
components. Connecting to other manufacturer’s AV com-  
ponents may cause them to malfunction.  
-compatible components.  
• Use only  
cables for  
connections.  
connector to only OnkyoAV  
To use  
you must also make an analog RCA/phono  
connection between your DV-CP702 and Onkyo AV  
receiver, even if they are connected digitally.  
• Some Onkyo  
-compatible AV components may not  
support the special functions described above.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Up & Setting Up the DV-CP702  
Here you need to specify the size of your TV (standard 4:3 or  
widescreen 16:9), select a language for the onscreen setup  
menus, and configure the digital audio output. You can  
change these settings later by using the onscreen setup menus  
(see page 38).  
STANDBY/ON  
ON STANDBY  
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
REPEAT  
3
1
4
7
2
5
8
0
-
A
B
Use the remote controller’s Up/  
6
9
1
RANDOM  
DISPLAY  
Down [ ]/[ ] buttons to select aTV  
Remote controller  
+
10  
CLEAR  
shape, and then press [ENTER].  
TOP MENU  
MENU  
See page 39 for more information on the  
TV Shape options.  
ENTER  
ENTER  
ENTER  
RETURN  
SETUP  
STANDBY indicator  
AUDIO ANGLE SUBTITLE  
The On-Screen Language menu appears.  
Select a language, and then press  
[ENTER].  
2
Powering Up the DV-CP702  
Remote controller  
See page 41 for more information on the  
language options.  
Before connecting the power cord, connect all your AV com-  
ponents (see page 16 to page 19).  
ENTER  
The Digital Out–>Dolby Digital menu  
appears.  
Don’t forget to turn on your TV or projector and select the  
video input to which the DV-CP702 is connected.  
If you’re using a hi-fi amp, AV receiver, or surround sound  
decoder for audio playback, turn that on as well and select the  
audio input to which the DV-CP702 is connected.  
Select a Dolby Digital option, and  
then press [ENTER].  
See page 41 for more information on the  
3
Remote controller  
digital audio output options.  
ENTER  
Connect the power cord to a suit-  
able wall outlet.  
The DV-CP702 enters Standby mode, and  
the STANDBY indicator comes on.  
1
The Digital Out–>Linear PCM Out menu  
appears.  
Select a Linear PCM Out option,  
and then press [ENTER].  
The Digital Out–>MPEG Out menu  
appears.  
4
Remote controller  
To turn on the DV-CP702, press the  
[STANDBY/ON] button (or the  
remote controller’s [ON] button).  
2
ENTER  
The DV-CP702 comes on, the display  
lights up, and the STANDBY indicator  
goes off.  
Select an MPEG Out option, and  
then press [ENTER].  
Remote controller  
5
To turn off the DV-CP702, press the  
[STANDBY/ON] button (or the remote  
controller’s [STANDBY] button). The  
DV-CP702 enters Standby mode and the  
STANDBY indicator comes on.  
Remote controller  
ON STANDBY  
The Digital Out–>Digital Out menu  
appears.  
ENTER  
Select a Digital Out option, and  
then press [ENTER].  
6
First Time Setup  
Remote controller  
The Initial Setup menu closes.  
The very first time you turn on your DV-CP702, the Initial  
Setup menu appears onscreen, as shown.  
ENTER  
Initial Setup  
TV Shape  
4:3 Letter box  
4:3 Normal  
On-Screen Language  
Digital Out  
16:9 Widescreen  
16:9 Compressed  
Your DV-CP702 is now ready for use. See page 21 for infor-  
mation on loading discs, and page 22 for information on  
selecting and playing discs.  
Notes:  
You can change the language of the onscreen setup menus,  
and your preferred languages for DVD menus, foreign lan-  
guage soundtracks, and subtitles individually on the Lan-  
guage page of the onscreen setup menus (see page 41).  
Sets aspect ratio of connected TV.  
ENTER  
Selection  
• Not all DVD-Video discs have multi-language menus, for-  
eign language soundtracks, and subtitles. In such cases, the  
disc’s default language is used.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback  
Notes:  
DISC  
SELECT  
OPEN/  
CLOSE  
You can load up to six discs. You don’t have to load all six  
discs every time.  
DISC SKIP  
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
• When the disc tray is closed, all of the disc indicators  
appear until the DV-CP702 has checked each bay for the  
presence of a disc. If a bay is found to have no disc, the  
corresponding indicator disappears.  
REPEAT  
3
1
4
7
2
5
8
0
-
A
B
6
9
RANDOM  
DISPLAY  
+
10  
CLEAR  
TOP MENU  
MENU  
• The disc tray can be opened and closed even while the DV-  
CP702 is in Standby mode, so you don’t have to turn it on  
to load or remove your discs. (The disc tray may take sev-  
eral seconds to open.)  
-
DV CP702  
ENTER  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
PLAY/ENTER  
• The DV-CP702 supports 8 cm and 12 cm discs. To avoid  
damaging your discs or DV-CP702, always place discs in  
the center of the disc bays.  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
DISC1–6  
DISC SKIP PROGRESSIVE DIMMER  
DISC SKIP  
-
RC 542DV  
• Only load discs that are supported by the DV-CP702 (see  
page 7). Don’t load cartridge-type discs.  
• To avoid personal injury, keep your hands away from the  
disc tray as it closes.  
Loading & Removing Discs  
• Always use the OPEN/CLOSE [ ] button to open and  
close the disc tray. Never push the disc tray, and don’t  
touch it, or obstruct it while it’s opening or closing. Don’t  
press down on the disc tray while it’s open, and don’t load  
anything other than supported discs. Doing so may damage  
your discs or DV-CP702.  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
This section explains how to load and remove discs.  
Press the OPEN/CLOSE [  
button.  
]
1
The disc tray opens and the six disc num-  
ber indicators appear on the display. A cir-  
cle appears around the number of the disc  
bay on the right.  
Loading Discs During Playback  
Remote controller  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
OPEN/  
CLOSE  
This section explains how to load and remove discs without  
stopping playback.  
Place a disc, label side up, into  
each bay.  
Press the OPEN/CLOSE [ ] button.  
The disc tray opens.  
2
3
1
The disc that’s currently playing remains  
inside the DV-CP702 and its disc bay is  
empty and won’t come to the front. To  
remove this disc you must stop playback  
Press the [DISC SKIP] button to  
access the other disc bays.  
The disc tray turns counterclockwise two  
bays at a time.  
Remote controller  
OPEN/  
CLOSE  
Remote controller  
before pressing the OPEN/CLOSE [  
button.  
]
DISC SKIP  
Load or remove discs as required,  
and press the [DISC SKIP] button  
to access the other disc bays.  
The disc numbers appear onscreen. The  
number of the disc bay on the right is  
highlighted.  
2
When you’ve finished, press the  
OPEN/CLOSE [ ] button again.  
The disc tray closes.  
4
Remote controller  
DISC SKIP  
See page 22 for information on selecting  
and playing discs.  
When you’ve finished, press the  
OPEN/CLOSE [ ] button again.  
The disc tray closes.  
Tip: If you press the Play [ ] button, the  
disc tray will close and playback of the  
disc in the right bay will start automati-  
cally. If there is no disc in that bay, the  
DV-CP702 will check the other bays and  
play the first disc it finds.  
3
Remote controller  
OPEN/  
CLOSE  
Playback of the current disc continues  
uninterrupted until you either stop play-  
back or select another disc.  
Remote controller  
Tip: If you press one of the DISC  
SELECT 1–6 buttons, the disc tray will  
close and playback of the selected disc  
will start automatically.  
Tip: If you press one of the DISC  
SELECT 1–6 buttons, the disc tray will  
close, playback of the current disc will  
stop, and playback of the newly selected  
disc will start automatically.  
OPEN/  
CLOSE  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
Starting, Pausing & Stopping Playback  
DISC SKIP DISC SELECT  
DVD  
VCD  
CD  
MP3  
WMA  
AUDIO ANGLE SUBTITLE  
This section explains how to start, pause, and stop playback.  
Start  
To start playback, press the Play  
[ ] button.  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
DISC1–6  
DISC SKIP  
DISC SKIP PROGRESSIVE DIMMER  
Playback starts and the Play indicator  
appears on the display.  
DV-CP702  
-
RC 542DV  
PAUSE  
If the disc is a DVD-Video or Video CD  
with PBC (Playback Control), you may  
need to start playback from a menu (see  
page 24).  
Remote controller  
STOP  
PLAY/ENTER  
The front panel Play [ ] button performs  
play and enter functions. The remote con-  
troller has separate Play [ ] and  
[ENTER] buttons.  
Selecting Discs  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
The section explains how to select loaded discs.  
Pause  
To pause playback, press the  
Pause [ ] button.  
Playback pauses and the Pause indica-  
tor appears on the display.  
Use the DISC SELECT buttons to  
select loaded discs.  
On the remote controller these buttons are  
labelled [DISC 1], [DISC 2], and so on.  
To resume playback, press the Play [ ]  
button.  
On the display, the number of the current  
disc has a circle around it.  
Remote controller  
Remote controller  
Playback resumes and the Pause indica-  
tor disappears.  
DISC  
1
DISC  
2
DISC  
3
What happens next depends on the type of  
disc you selected, as follows:  
DISC  
4
DISC  
5
DISC  
6
Stop  
To stop playback, press the Stop  
[ ] button.  
Playback stops and the Play indicator  
disappears.  
DVD-Video: Typically a menu appears  
onscreen. See page 24.  
Video CD: Playback starts automatically.  
Audio CD: Playback starts automatically.  
Remote controller  
MP3/WMA/JPEG: The Disc Navigator  
appears onscreen. See page 26.  
JPEG-only CD: With some JPEG CDs,  
picture thumbnails appear onscreen. See  
page 30.  
Notes:  
• During playback, you can select chapters or tracks by  
using the Next [ ] and Previous [ ] buttons.  
Notes:  
• When you stop playback of a DVD-Video disc or Video  
CD, the DV-CP702 remembers the point at which playback  
was stopped and “Resume” appears onscreen for a few sec-  
onds. To resume playback from that point, press the Play  
[ ] button. To cancel the Resume function, press the Stop  
[ ] button again. The Resume function is reset when  
another disc is selected.  
• The type of disc currently selected is shown on the display:  
DVD, VCD, or CD (see page 11).  
You can select discs while the DV-CP702 is stopped or dur-  
ing playback.  
You can use the [DISC SKIP] button to skip the current  
disc and start the next disc. If disc #6 is the current disc,  
disc #1 will be selected next.  
• With the Last Memory function you can resume playback  
from a specific point even if the disc has been removed (see  
page 36).  
• Do not move the DV-CP702 or subject it to vibration dur-  
ing playback. Doing so may damage your discs or DV-  
CP702.  
You can improve the picture quality of paused playback  
with the Pause/Still setting (see page 43).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
• Prolonged display of the same picture or menu may cause  
irreparable damage to your TV screen called screen burn-  
in. To prevent this, don’t keep playback paused for too long  
and always press the Stop [ ] button when you’ve finished  
playing a DVD-Video disc or Video CD. Your DV-CP702  
features a screen saver to protect your TV from the effects  
of burn-in (see page 43).  
• With some DVD-Video discs, you may experience picture  
noise that is not normally visible with regular TV broad-  
casts. This is usually because DVD-Video disc uses a lot of  
high-resolution video data. The amount of noise, if any,  
will depend on your particular TV and the problem can  
sometimes be alleviated by turning down your TV’s sharp-  
ness control.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
Use the remote controller’s naviga-  
tion [ ], [ ], [ ], [ ] buttons to  
select items on the menu, and use  
the [ENTER] button to confirm your  
selection.  
2
Remote controller  
ENTER  
DV-CP702  
If you select a playback option (e.g., sub-  
titles), another menu of options will typi-  
cally appear, in which case you use the  
remote controller’s navigation buttons to  
select items and the [ENTER] button to  
confirm your choice.  
PLAY/ENTER  
0
+
10  
CLEAR  
TOP MENU  
MENU  
With PBC Video CDs, you have to enter a  
number to select a menu item, which you  
can do by using the remote controller’s  
number buttons. If the Video CD’s menu  
has several pages, use the Next [ ] and  
Previous [ ] buttons to select them.  
During playback, you can display the  
menu by pressing the [RETURN] button.  
TOP MENU  
ENTER  
RETURN  
AUDIO  
MENU  
ENTER  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
SUBTITLE  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
DISC SKIP PROGRESSIVE DIMMER  
-
RC 542DV  
Notes:  
• Not all DVD-Video discs and PBCVideo CDs have menus.  
• Menu operation varies from disc-to-disc. See the disc’s  
sleeve notes for details.  
Navigating Disc Menus  
• On some DVD-Video discs, options such as foreign lan-  
guage soundtracks, subtitles, and audio formats appear on  
a separate menu called the disc menu, and titles and chap-  
ters appear on what’s called the title menu. To display the  
disc menu, press the [MENU] button. If no menu appears,  
press the [TOP MENU] button.  
DVD  
VCD  
DVD-Video discs usually have an onscreen menu from  
which you can select titles, chapters, and other options,  
including foreign language soundtracks, subtitles, and audio  
formats (e.g., Dolby Digital or DTS).Video CDs that support  
PBC (Playback Control) may also have an onscreen menu  
(see page 8).  
• With DVD-Video discs, foreign language soundtracks and  
audio formats can usually be selected during playback by  
using the remote controller’s [AUDIO] button (see  
page 35). Similarly, subtitles can be selected by using the  
remote controller’s [SUBTITLE] button (see page 35).  
Load and select a DVD-Video disc  
or Video CD.  
See page 21 and page 22.  
1
You must turn on PBC in order to use the menus on a PBC  
Video CD (see page 43).  
With DVD-Video discs, a menu usually  
appears automatically. If it doesn’t, try  
pressing the [TOP MENU] button.  
• If PBC is off (see page 43), or your Video CD doesn’t sup-  
port it, you can use the Next [ ] and Previous [ ] but-  
tons, or the remote controller’s number buttons to select  
tracks on a Video CD.  
With some PBC Video CDs, you may  
have to press the Play [ ] button to dis-  
play the menu.  
• PBC menus can be hidden or displayed while playback is  
stopped by pressing the [TOP MENU] button.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
Use the number buttons to specify  
a chapter or title.  
To enter, for example, “2,” press the [2]  
button.  
4
ON STANDBY  
OPEN/  
CLOSE  
Remote controller  
SEARCH LAST  
M
MEMORY CHAIN MODE  
SEARCH  
REPEAT  
3
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
-
A
B
Number  
buttons  
6
9
RANDOM  
DISPLAY  
disc  
Disc Navigator  
+
10  
CLEAR  
no.  
Search  
1
TOP MENU  
MENU  
CLEAR  
ENTER  
Disc  
Title  
Chapter  
DV-CP702  
ENTER  
+
10  
1:DVD Current/Total 01/02 Current/Total -2 /08  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
To enter, for example, “12,” press the [1]  
or [+10] button followed by the [2] but-  
ton.  
PLAY/ENTER  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
DISC SKIP PROGRESSIVE DIMMER  
disc  
Disc Navigator  
-
RC 542DV  
no.  
Search  
1
Disc  
Title  
Chapter  
1:DVD Current/Total 01/02 Current/Total 12 /08  
To clear the number, press the [CLEAR]  
button.  
Selecting Titles & Chapters by Number  
DVD  
Press the Play [ ] or [ENTER] but-  
ton to start playback of the speci-  
fied chapter or title.  
This section explains how to select chapters, titles, and discs  
by number.  
5
Load and select a DVD-Video disc.  
See page 21 and page 22.  
During playback, you can select other  
chapters by using the Next [ ] and Pre-  
vious [ ] buttons.  
1
Remote controller  
Press the [SEARCH] button.  
The Disc Navigator Search window  
2
Remote controller  
appears onscreen, as shown.  
SEARCH  
disc  
Disc Navigator  
ENTER  
no.  
Search  
1
Disc  
Title  
Chapter  
1:DVD Current/Total 01/02 Current/Total -- /08  
Notes:  
With some DVD-Video discs you can  
select only titles, and the Chapter Current/  
Total information is not displayed. Some  
discs won’t allow you to select titles.  
You can also select chapters by using the number buttons,  
without opening the Disc Navigator Search window.  
• If the current DVD-Video disc contains only one title, you  
won’t be able to select other titles. Similarly, if it contains  
no chapters, you won’t be able to select chapters.  
If you want to select a title, use the  
[ ] button to select the title number.  
3
• DVD-Video discs usually have onscreen menus for select-  
ing titles and chapters (see page 24).  
Remote controller  
disc  
Disc Navigator  
• With some discs you may not be able to select titles and  
chapters as described here.  
no.  
Search  
1
ENTER  
Disc  
Title  
Chapter  
1:DVD Current/Total -- /02 Current/Total 03/08  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
To open a folder, use the remote  
controller’s Up/Down [ ]/[ ] but-  
tons to select it, and then press  
[ENTER].  
Use the Up/Down [ ]/[ ] buttons to  
select tracks in the open folder.  
2
Remote controller  
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
REPEAT  
3
MEMORY  
1
4
7
2
5
8
0
ENTER  
-
B
A
6
9
RANDOM  
DISPLAY  
+
10  
CLEAR  
TOP MENU  
MENU  
TOP MENU  
ENTER  
/
To close a folder (i.e., move back up  
the directory tree), press the  
[RETURN] button.  
ENTER  
3
RETURN  
SETUP  
DV-CP702  
Remote controller  
RETURN  
AUDIO ANGLE SUBTITLE  
RETURN  
To get back to the root level, press the  
[TOP MENU] button.  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
STOP  
DISC SKIP PROGRESSIVE DIMMER  
PLAY/ENTER  
To play a track, select it, and then  
press the Play [ ] button (or the  
[ENTER] button).  
4
-
RC 542DV  
When all the tracks in that folder have  
been played, tracks in the next folder are  
played.  
Using the Disc Navigator  
Remote controller  
You can select the next or previous track  
MP3  
WMA  
JPEG  
during playback by using the Next [  
and Previous [ ] buttons.  
]
With the Disc Navigator you can select MP3, WMA, and  
JPEG files.  
If the disc contains MP3/WMA files and  
JPEG files, they are played/displayed in  
order. JPEG files will be displayed in a  
slideshow. Press the [MENU] button to  
display the first nine pictures at thumb-  
nail-size (see page 30). Depending on the  
disc, the first nine pictures may be dis-  
played automatically.  
Load and select a disc containing  
MP3, WMA, or JPEG files.  
1
See page 21 and page 22.  
The Disc Navigator appears, as shown.  
disc  
Disc Navigator  
MODE  
001  
0.00  
002  
– –  
no.  
4
Folder  
Track  
ROOT  
001.ONKYO  
002.RUN  
002.RUN  
Press the Stop [ ] button to stop  
playback.  
M
~
P
3 001.OVER_T  
1
5
M
M
~
P
3 002.SONG_F  
1
~
P
3 003.DONT_L  
1
M
M
M
M
M
~
P
3 004.MOST_I  
1
~
P
3 005.WELCOM  
1
~
P
3 006.GO_AHE  
1
P
3 007.STILL  
Remote controller  
~
P
3 008.GOOD_D  
1
ENTER  
Select  
Selection  
RETURN Back to previous  
TOP MENU Back to top  
The number of the currently selected disc  
is shown on the disc icon. The Folder col-  
umn lists the folders. The Track column  
lists the tracks in the open folder.  
Notes:  
• If the selected JPEG file’s resolution is 640 x 480 pixels, a  
thumbnail-size preview will be shown. If the resolution  
exceeds 640 x 480, a preview will only be shown if the file  
contains thumbnail image data.  
The file information displayed depends on  
the type of file selected, as follows:  
• If the TV shape is set to “16:9 Compressed,” no thumbnail-  
size preview will be displayed by the Disc Navigator.  
MP3/WMA: Title, Artist Name, and  
You can use the Random Playback function to play a ran-  
dom selection of MP3/WMA files (page 32).  
Album Name.  
JPEG:Thumbnail-size preview, File Size  
and Date Created.  
• During random playback, the remote controller’s naviga-  
tion [ ], [ ], [ ], [ ] buttons cannot be used with the Disc  
Navigator.  
During playback, the following informa-  
tion is displayed in the upper-right corner:  
folder number, file number, and elapsed  
time. During memory playback, the cur-  
rent step number is displayed as well.  
You can use the Disc Navigator to create a playlist of MP3/  
WMA files for memory playback.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
Memory Playback in the Disc Navigator  
MP3  
WMA  
JPEG  
You can compile a playlist of tracks and folders in the Disc  
Navigator as follows.  
With the Disc Navigator open,  
press the [MEMORY] button.  
1
Remote controller  
The playlist appears in place of the file  
MEMORY  
information.  
To add a track to the playlist, use  
the [ ], [ ], [ ], [ ] buttons to select  
it in the track column, and then  
2
Remote controller  
press the [ENTER] button.  
ENTER  
To add a folder to the playlist, you need to  
select the folder at the top of the track col-  
umn. “ALL” will be displayed in the play-  
list.  
Press the [MEMORY] button again to  
MEMORY  
open the Memory Play Setup window, on  
which you can add titles, chapters, tracks,  
and folders from any disc (see page 33).  
To start memory playback, press  
the Play [ ] button.  
3
Remote controller  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
Press the Play [ ] button to start  
playback of the specified track.  
You can also select tracks while the DV-  
CP702 is during playback by using the  
Next [ ] and Previous [ ] buttons.  
4
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
SEARCH  
REPEAT  
3
1
4
7
2
5
8
0
-
A
B
Number  
buttons  
6
9
RANDOM  
DISPLAY  
Remote controller  
+
10  
CLEAR  
TOP MENU  
MENU  
DV-CP702  
ENTER  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
Notes:  
You can also select tracks by using the number buttons  
without opening the Disc Navigator Search window.  
PLAY/ENTER  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
• If PBC is on (see page 43), and your Video CD supports  
PBC (Playback Control), you may be able to select tracks  
from an onscreen menu (see page 24).  
DISC SKIP PROGRESSIVE DIMMER  
-
RC 542DV  
• With PBC Video CDs you can also use the number buttons  
to select tracks from a menu.  
You can’t use the [SEARCH] button during random play-  
back.  
Selecting Tracks by Number  
VCD  
CD  
MP3  
WMA  
This section explains how to select tracks by number.  
Fast Forward & Reverse  
DVD  
VCD  
CD  
MP3  
WMA  
Load and select a Video CD, audio  
1
CD, or MP3/WMA disc.  
See page 21 and page 22.  
The section explains how to fast forward and reverse.  
Fast forward  
During playback, press the Fast  
Forward [ ] button to start fast  
forward.  
Press the [SEARCH] button during  
playback.  
2
Remote controller  
Remote controller  
The Disc Navigator Search window  
appears onscreen, as shown.  
Playback fast forwards and “Fast  
Forward 1” appears onscreen.  
SEARCH  
disc  
Disc Navigator  
To change the fast-forward speed, press  
the Fast Forward [ ] button repeatedly  
to cycle through the speeds: Fast  
no.  
Search  
3
Disc  
3:CD  
Track  
Current/Total -- /18  
Remote controller  
Forward 1, Fast Forward 2, and so on.  
To resume normal playback, press  
the Play [ ] button.  
Use the number buttons to enter a  
track number.  
To enter, for example, “5,” press the [5]  
button.  
3
Fast reverse  
During playback, press the Fast  
Reverse [ ] button to start fast  
reverse.  
Remote controller  
Remote controller  
1
4
7
2
5
8
0
3
6
9
disc  
Disc Navigator  
Playback reverses and “Fast Reverse 1”  
appears onscreen.  
no.  
Search  
3
Disc  
3:CD  
Track  
Current/Total -5 /18  
+
10  
To change the fast-reverse speed, press  
the Fast Reverse [ ] button repeatedly to  
cycle through the speeds: Fast Reverse 1,  
Fast Reverse 2, and so on.  
To enter, for example, “18,” press the [1]  
or [+10] button followed by the [8] button.  
Remote controller  
To resume normal playback, press  
the Play [ ] button.  
disc  
Disc Navigator  
no.  
Search  
3
Disc  
3:CD  
Track  
Current/Total 18 /18  
Notes:  
• There are five fast forward and fast reverse speeds for  
DVD-Video discs and three forVideo CDs, audio CDs, and  
MP3/WMA discs.  
• No sound is output during fast forward or fast reverse of a  
DVD-Video disc or Video CD.  
• Sound is output intermittently during fast forward or fast  
reverse of an audio CD or MP3/WMA disc.  
• Fast reverse playback is not possible with WMA tracks.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
ON STANDBY  
Slow-motion Playback  
DVD  
VCD  
With the Slow-motion Playback function you can watch a  
scene slowly either forward or backward.  
DV-CP702  
Forward  
During playback, press the STEP/  
SLOW [+] button.  
DIMMER  
PLAY/ENTER  
slow motion  
AUDIO ANGLE SUBTITLE  
Remote controller  
Forward slow-motion playback starts and  
“Slow 1” appears onscreen.  
STEP/SLOW  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
To change the slow-motion speed, press  
the STEP/SLOW [+] button repeatedly to  
cycle through the speeds: Slow 1, Slow 2,  
and so on.  
STEP/SLOW +/–  
DIMMER  
DISC SKIP PROGRESSIVE DIMMER  
-
RC 542DV  
Backward  
During playback, press the STEP/  
SLOW [–] button.  
slow motion  
Frame-by-Frame Playback  
Remote controller  
Backward slow-motion playback starts  
and “Reverse Slow 1” appears onscreen.  
STEP/SLOW  
DVD  
VCD  
To change the slow-motion speed, press  
the STEP/SLOW [–] button repeatedly to  
cycle through the speeds: Reverse Slow 1,  
Reverse Slow 2, and so on.  
With the Frame-by-Frame Playback function you can view  
individual frames one at a time either forward or backward.  
Forward  
frame-by-  
frame  
While paused, press the STEP/  
SLOW [+] button.  
Press the STEP/SLOW [+] button  
repeatedly to view subsequent  
frames.  
Resume  
To resume normal playback, press  
the Play [ ] button.  
playback  
Remote controller  
STEP/SLOW  
Remote controller  
Backward  
frame-by-  
frame  
While paused, press the STEP/  
SLOW [–] button.  
Press the STEP/SLOW [–] button  
repeatedly to view previous  
frames.  
Notes:  
• There are four slow motion speeds for DVD-Video discs  
and three for Video CDs.  
Remote controller  
• Backward slow-motion playback is not possible with  
Video CDs.  
STEP/SLOW  
• No sound is output during slow-motion playback.  
Adjusting the Display Brightness  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
Resume  
To resume normal playback, press  
the Play [ ] button.  
playback  
You can adjust the brightness of the display as follows.  
Remote controller  
Press the [DIMMER] button repeat-  
edly to cycle through the following  
options: dim, dimmer, disc tray  
1
light off, normal brightness.  
Notes:  
Remote controller  
• Backward frame-by-frame playback is not possible with  
Video CDs.  
DIMMER  
You can improve the picture quality of frame-by-frame  
playback with the Pause/Still setting (see page 43).  
• With some discs, the picture may shake when using back-  
ward frame-by-frame playback.  
Notes:  
• When the display brightness on another OnkyoAV compo-  
nent connected via  
is changed, the “disc tray light off”  
• No sound is output during frame-by-frame playback.  
option might not work.  
• Prolonged display of the same picture or menu may cause  
irreparable damage to your TV screen called screen burn-  
in. To prevent this, don’t display the same frame for too  
long. Your DV-CP702 features a screen saver to protect  
your TV from the effects of burn-in (page 43).  
• Even if you selected the “disc tray light off” option, the  
disc tray light will come on when the disc tray is opened.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback—Continued  
To stop the slideshow, press the  
[STOP] or [MENU] button.  
3
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
Depending on the type of JPEG disc,  
either the first nine pictures appear in  
thumbnail-size or the Disc Navigator win-  
dow appears.  
CHAIN  
REPEAT  
3
1
4
7
2
5
8
0
MODE  
-
B
A
6
9
RANDOM  
DISPLAY  
MENU  
Remote controller  
+
10  
CLEAR  
DV-CP702  
TOP MENU  
MENU  
The slideshow stops automatically when  
all pictures have been displayed.  
ENTER  
/
ENTER  
CHAIN MODE  
STOP  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
MENU  
PLAY/ENTER  
DISC  
3
STEP/SLOW  
Using JPEG CDs  
The DV-CP702 supports JPEG CDs, so you can view your  
photos on TV either individually or as a slideshow.  
Using Chain Mode  
DVD  
VCD  
CD  
MP3  
WMA  
Load and select a CD containing  
JPEG pictures.  
With the Chain mode function you can consecutively play all  
discs, all DVD-Video discs and Video CDs, or all audio CDs  
and MP3/WMA discs as if they were one big disc.  
1
See “Using the Disc Navigator” on  
page 26, and follow the procedure up to  
step 4 so that the first nine pictures are dis-  
played at thumbnail-size before continu-  
ing with this procedure.  
Press the [CHAIN MODE] button  
1
repeatedly to select CD, DVD, or  
ALL.  
The CHAIN MODE indicator flashes  
appear on the display.  
With some JPEG discs, the first nine pic-  
tures automatically appear onscreen at  
thumbnail-size when the disc is selected.  
ALL: All discs are played consecutively.  
Remote controller  
Use the Next [ ] and Previous [  
]
DVD: All DVD-Video discs and Video  
CDs are played consecutively.  
CHAIN MODE  
buttons to display the next or previous  
folder or page.  
CD: All CDs (audio/MP3/WMA) are  
played consecutively.  
Use the [ ], [ ], [ ], [ ] buttons to select  
a picture, and then press the Play [ ] or  
[ENTER] button to start the slideshow.  
While the CHAIN MODE indicator is  
flashing, press the Play [ ] or  
[ENTER] button to start Chain  
mode playback.  
The Chain mode function will be can-  
celled if you do not start playback within  
2
If this folder icon is displayed in the  
upper-left corner, selecting it and  
pressing [ENTER] will open the Disc  
Navigator window.  
Remote controller  
You can use the following func-  
tions during the slideshow:  
five seconds of pressing the [CHAIN  
MODE] button.  
2
To display the next or previous picture, use  
the Next [ ] and Previous [ ] buttons.  
ENTER  
To turn a picture upside down, use the Up/  
Down [ ]/[ ] buttons (not while zoomed  
in).  
To rotate a picture clockwise or counter-  
clockwise, use the Left/Right [ ]/[ ] but-  
tons (not while zoomed in).  
Notes:  
• With the DVD and All Chain modes, Video CD PBC  
menus are ignored.  
• JPEG files are skipped during Chain mode playback.  
To pause the slideshow, press the but-  
ton. Press the Play [ ] button to resume.  
• With the DVD and All Chain modes, DVD-Video menus  
are ignored and titles are played automatically. This may  
not work with some discs.  
To zoom in or out, use the Fast Forward  
[
] and Fast Reverse [ ] buttons. Use  
You can’t use the repeat functions with Chain mode play-  
back.  
the Left/Right [ ]/[ ] and Up/Down [ ]/  
[ ] buttons to move around the picture  
while zoomed in. The slideshow pauses  
while zoomed in. To cancel the zoom,  
press the Play [ ] button.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback  
Notes:  
• The Time Search function works only within the currently  
playing title (DVD-Video) or track (Video CD, audio CD).  
For example, if the current title is one hour long and you  
enter the time 1 hour, 30 minutes, nothing will happen.  
DV-CP702  
• In some cases, playback may start from a slightly different  
point to the one you specified.  
REPEAT  
PLAY/ENTER  
• Time Search may not work with some discs.  
ON STANDBY  
OPEN/  
CLOSE  
You can’t use the [SEARCH] button during random play-  
back.  
SEARCH LAST  
M
MEMORY CHAIN MODE  
SEARCH  
REPEAT  
3
1
4
7
2
5
8
0
REPEAT  
-
B
A
Number  
buttons  
6
9
RANDOM  
DISPLAY  
+
10  
CLEAR  
Repeat Playback  
TOP MENU  
MENU  
DVD  
VCD  
CD  
MP3  
WMA  
ENTER  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
With the Repeat Playback function you can play the current  
disc, title, chapter, track, or folder of MP3/WMA files over-  
and-over again.  
3
TEP/SLOW  
Press the [REPEAT] button repeat-  
edly to select a repeat option.  
The currently selected repeat option  
appears onscreen and “REPEAT” appears  
on the display.  
Locating Specific Points in Time  
1
DVD  
VCD  
CD  
With the Time Search function you can locate specific points  
in time.  
The available options depend on the cur-  
rent disc type, as follows:  
Remote controller  
Press the [SEARCH] button twice.  
The Disc Navigator Search window  
appears onscreen, as shown.  
1
REPEAT  
Remote controller  
DVD-Video: Chapter, Title, 1 Disc, All  
Disc.  
SEARCH  
disc  
Disc Navigator  
Video CD: 1 Disc, All Disc.  
no.  
Search  
6
Audio CD: Track, 1 Disc, All Disc.  
Disc  
Time  
6:DVD  
-- : -- : --  
MP3/WMA: Track, Folder, 1 Disc, All  
Disc.  
Use the number buttons to enter a  
time.  
To enter, for example, 1 hour, 25 minutes,  
30 seconds, press the [1], [2], [5], [3], and  
[0] buttons.  
2
Press the Play [ ] button to start  
repeat playback.  
2
Remote controller  
Remote controller  
1
4
7
2
5
8
0
3
6
9
disc  
Disc Navigator  
To cancel Repeat Playback, use the  
[REPEAT] button to select Off.  
3
no.  
Search  
6
+
10  
Remote controller  
Disc  
Time  
6:DVD  
1:25:30  
REPEAT  
To enter, for example, 2 minutes, 15 sec-  
onds, press the [2], [1], and [5] buttons.  
disc  
Disc Navigator  
Notes:  
no.  
Search  
6
• Repeat Playback may not work with some DVD-Video  
discs.  
Disc  
6:DVD  
Time  
0:02:15  
• If you press the [REPEAT] button while the Memory Play-  
back function is on (see page 33), the current memory list  
will play repeatedly.  
• With PBCVideo CDs, you can’t select Repeat Playback. In  
this case, you need to cancel PBC playback first, and then  
select Repeat Playback.  
Press the Play [ ] button to locate  
the specified point.  
Playback starts from the specified point.  
3
You can’t use the repeat functions with Chain mode play-  
back.  
Remote controller  
• If you select another disc, repeat playback is cancelled.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback—Continued  
Select a disc.  
See page 22.  
1
2
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
SEARCH  
REPEAT  
3
Press the [RANDOM] button  
repeatedly to select a random  
option.  
1
4
7
2
5
8
0
-
A
B
6
9
A-B  
RANDOM  
Remote controller  
RANDOM  
DISPLAY  
RANDOM  
+
10  
CLEAR  
DV-CP702  
TOP MENU  
MENU  
CLEAR  
The currently selected random option  
appears onscreen and “RANDOM”  
appears on the display.  
ENTER  
/
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
PLAY/ENTER  
The available options depend on the cur-  
rent disc type, as follows:  
DISC  
1
DISC  
2
DISC  
DISC  
3
6
STEP/SLOW  
DVD-Video: Title, 1 Disc, All Disc.  
Video CD/audio CD: 1 Disc, All Disc.  
A–B Repeat Playback  
MP3/WMA: Folder, 1 Disc, All Disc  
(files in subfolders are not played).  
DVD  
VCD  
CD  
With the “Title” option, chapters within  
the current title are played at random.  
With the “1 Disc” option, all titles, chap-  
ters, tracks, and folders on the current disc  
are played at random.  
With the A–B Repeat Playback function you can play a spec-  
ified section over-and-over again.  
During playback, press the [A–B]  
button to set the A point (i.e., the  
start of the section you want to  
1
Remote controller  
If you press the [RANDOM] button dur-  
ing playback, random playback begins  
after the current disc, title, chapter, track,  
or MP3/WMA folder has finished.  
-
A B  
repeat).  
“A–” appears onscreen and “R_A”  
appears on the display  
Press the [A–B] button again to set  
the B point (i.e., the end of the sec-  
tion you want to repeat).  
Press the Play [ ] button to start  
random playback.  
Random playback starts.  
2
3
Remote controller  
-
A B  
Playback repeats between the A and B  
points, and “A–B” appears onscreen and  
“R_AB” appears on the display.  
Remote controller  
To cancel A–B Repeat Playback,  
press the [CLEAR] button, or use  
the [A–B] button to select Off.  
3
To cancel random playback, use  
the [RANDOM] button to select Off.  
Remote controller  
4
CLEAR  
Remote controller  
RANDOM  
-
A B  
Notes:  
• To select the next random disc, title, chapter, track, or  
MP3/WMA folder during random playback, press the Next  
Notes:  
• A–B Repeat Playback may not work with some  
DVD-Video discs and PBC Video CDs.  
[
] button.  
• Random playback may not work with some DVD-Video  
discs.  
• In some cases, the A and B points may be at slightly differ-  
ent points to the ones you specified.  
• With PBC Video CDs, you can’t use this function. Cancel  
PBC playback first, and then set this function.  
• If you select a different camera angle during A–B repeat  
playback, the original camera angle will be selected when  
playback restarts from the A point.  
• Random playback cannot be used with the Memory Play-  
back function.  
You can’t use the [SEARCH] button during random play-  
back.  
Random Playback  
DVD  
VCD  
CD  
MP3  
WMA  
• During random playback, the remote controller’s naviga-  
tion [ ], [ ], [ ], [ ] buttons don’t work in the Disc Nav-  
igator.  
With the Random Playback function you can enjoy a random  
selection of discs, titles, chapters, tracks, or MP3/WMA  
folders.  
• If you select another disc, random playback is cancelled,  
except when the random option is set to “All Disc,” in  
which case playback continues.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback—Continued  
Repeat steps 2 and 3 to add more  
items to the memory list.  
New items will be added to the memory  
list as steps 02, 03, and so on.  
4
5
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
MEMORY  
CLEAR  
REPEAT  
3
1
4
7
2
5
8
0
-
A
B
Number  
buttons  
6
9
RANDOM  
DISPLAY  
To play the memory list, press the  
Play [ ] button.  
+
10  
CLEAR  
TOP MENU  
MENU  
Remote controller  
ENTER  
/
The Memory Play Setup window must be  
open when you press the Play [ ] button.  
ENTER  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
ANGLE  
3
STEP/SLOW  
Memory Playback  
To stop playback, press the Stop  
[ ] button.  
6
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
Remote controller  
With the Memory Playback function you can create your  
own memory list of titles, chapters, and tracks.  
Press the [MEMORY] button.  
The Memory Play Setup window appears  
onscreen, as shown.  
1
To insert a new item into the mem-  
ory list, use the Left/Right [ ]/[ ]  
buttons to select the list, use the  
Up/Down [ ]/[ ] buttons to select  
the step before which you want to  
insert the new item, and then press  
the [ENTER] button.  
7
Remote controller  
Remote controller  
MEMORY  
Disc Navigator  
Memory Play Setup  
ENTER  
Memory List  
Title/Folder  
6:DVD Current/Total 001/ --- Current/Total --- / ---  
--  
No. Disc  
Chapter/Track  
01. - : ---  
02. - : ---  
03. - : ---  
--- / ---  
--- / ---  
--- / ---  
--- / ---  
--- / ---  
--- / ---  
The cursor moves to the top row and the  
selected step remains highlighted.  
The top row ( ) is used to enter disc, title/  
folder, and chapter/track numbers. Steps  
in the memory list are numbered sequen-  
tially.  
Disc Navigator  
Memory Play Setup  
Memory List  
Title/Folder  
6:DVD Current/Total 001/ --- Current/Total --- / ---  
--  
No. Disc  
Chapter/Track  
01. 6:DVD  
02. - : ---  
03. 6:DVD  
001/ ---  
--- / ---  
001/ ---  
003/ ---  
--- / ---  
003/ ---  
Enter the disc, title/folder, and  
2
chapter/track numbers of the item  
you want to add to the memory list.  
Use the remote controller’s Left/Right  
[ ]/[ ] buttons to select the parameters,  
and use the Up/Down [ ]/[ ] buttons to  
select numbers from 001 to 999.  
Remote controller  
Enter the disc, title/folder, and  
chapter/track numbers of the item  
to be inserted.  
ENTER  
Press the [ENTER] button.  
The new item is inserted into the memory  
list and subsequent items move down the  
list.  
The number of the currently selected disc  
is already entered.  
You can enter numbers directly by using  
the remote controller’s number buttons.  
To delete a step, use the Left/Right  
[ ]/[ ] buttons to select the list, use  
the Up/Down [ ]/[ ] buttons to  
select it, and then press the  
[CLEAR] button.  
8
Remote controller  
To add the all titles, folders, chapters, or  
tracks on the disc, select the top row ( ),  
and then press the Down [ ] button.  
ENTER  
The item is deleted and subsequent items  
move up the list.  
Press the [ENTER] button.  
The new item is added to the memory list  
as step 01.  
3
Remote controller  
CLEAR  
ENTER  
Disc Navigator  
Memory Play Setup  
Memory List  
Title/Folder  
6:DVD Current/Total 001/ --- Current/Total --- / ---  
--  
No. Disc  
Chapter/Track  
01. 6:DVD  
02. - : ---  
03. - : ---  
001/ ---  
--- / ---  
--- / ---  
003/ ---  
--- / ---  
--- / ---  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback—Continued  
Selecting Camera Angles  
To edit a step, use the Left/Right  
9
[ ]/[ ] buttons to select the list, use  
the Up/Down [ ]/[ ] buttons to  
select the step, and then use the  
Left/Right [ ]/[ ] buttons to select  
the top row ( ) again.  
Edit the disc, title/folder, and chap-  
ter/track numbers, and then press  
the [ENTER] button.  
DVD  
Remote controller  
Some DVD-Video discs feature multiple camera angles that  
allows you to view scenes from different angles. If the cur-  
rently playing DVD-Video disc features multiple camera  
angles, the camera indicator appears onscreen and on the  
display. Such a disc usually has the multiple camera angle  
logo ( ) printed on its sleeve notes.  
ENTER  
Remote controller  
Press the [ANGLE] button repeat-  
edly to cycle through the available  
camera angles.  
To close the Memory Play Setup  
window, press the [MEMORY] but-  
ton.  
10  
ANGLE  
Remote controller  
MEMORY  
The number of the currently selected  
camera angle appears onscreen. For  
example, on a disc with three camera  
angles, you’d see 1/3, 2/3, and 3/3.  
Notes:  
• The entire memory list is cleared when the DV-CP702 is  
set to Standby.  
Notes:  
• With some DVD-Video discs you may not be able to select  
different camera angles even though the camera indica-  
tor is displayed.  
• With PBC Video CDs, you can’t use this function. Cancel  
PBC playback first, and then set this function.  
• A playlist of MP3/WMA files can be made using the Disc  
Navigator (see page 26).  
• With some DVD-Video discs you can select camera angles  
from a menu.  
• Some DVD-Video discs won’t allow you to select different  
camera angles while playback is paused.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback—Continued  
Remote controller  
During playback, press the [SUBTI-  
TLE] button repeatedly to cycle  
through the available subtitles.  
SUBTITLE  
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
REPEAT  
3
The name of the selected subtitle appears  
onscreen for several seconds.  
1
4
7
2
5
8
0
-
A
B
6
9
RANDOM  
DISPLAY  
+
To turn off subtitles, use the [SUBTITLE]  
button to select Off.  
10  
CLEAR  
TOP MENU  
MENU  
ENTER  
RETURN  
SETUP  
Notes:  
AUDIO ANGLE SUBTITLE  
AUDIO  
SUBTITLE  
• With DVD-Video discs, when you stop playback and can-  
cel the Resume function (see page 22), or select another  
disc, the subtitle language will revert to your default subtile  
language (see page 42), or the disc’s default subtitle lan-  
guage.  
DISC  
DISC  
1
4
DISC  
DISC  
2
5
DISC  
DISC  
3
6
STEP/SLOW  
DISC SKIP PROGRESSIVE DIMMER  
PROGRESSIVE  
-
RC 542DV  
• With some DVD-Video discs you can select subtitles from  
a menu, and you may not be able to select subtitles during  
playback.  
• To check the subtitle language currently selected, press the  
[SUBTITLE] button once. The current setting will appear  
onscreen for several seconds.  
Selecting Languages & Audio Formats  
DVD  
VCD  
Some DVD-Video discs feature soundtracks in several lan-  
guages and audio formats (e.g., Dolby Digital or DTS).  
Music DVD-Video discs sometimes feature soundtracks in  
several audio formats, such as PCM or Dolby Digital 5.1. See  
the disc’s sleeve notes for details.  
Using Progressive Scanning  
With the Progressive Scanning function you can enjoy better  
picture quality. To use Progressive Scanning, your TV or pro-  
jector must support progressive scanning and you must con-  
nect it to the DV-CP702’s component video outputs (see  
page 17).  
Remote controller  
During playback,press the [AUDIO]  
button repeatedly to cycle through  
the available soundtracks.  
AUDIO  
Press the [PROGRESSIVE] button.  
Progressive scanning is enabled and the  
PRGV indicator appears on the display.  
The name of the selected soundtrack  
appears onscreen for several seconds.  
1
Remote controller  
PROGRESSIVE  
For Video CDs, you can select stereo,  
Mono L (left), or Mono R (right).  
Notes:  
To turn off progressive scanning,  
press the [PROGRESSIVE] button  
again.  
2
• With DVD-Video discs, when you stop playback and can-  
cel the Resume function (see page 22), or select another  
disc, the soundtrack language will revert to your default  
language (see page 42), or the disc’s default language.  
Remote controller  
PROGRESSIVE  
The PRGV indicator disappears.  
• With some discs, selecting another soundtrack may cause  
the picture to skip momentarily.  
Notes:  
• To listen to just the accompaniment on a karaoke CD,  
select the Mono L (left) or Mono R (right) channel. See the  
disc’s sleeve notes for details.  
• If your TV or projector doesn’t support progressive scan-  
ning and it’s connected to the DV-CP702’s component  
video outputs, if you turn on the Progressive Scanning  
function, you’ll get no picture.  
• With some DVD-Video discs you need to select  
soundtracks from a menu, and you may not be able to  
select other soundtracks during playback.  
• The S-Video and composite video outputs are not affected  
by the Progressive Scanning function.  
• Progressive scanning cannot be turned on or off during  
playback. You must stop playback first.  
Selecting Subtitles  
• Progressive scanning cannot be turned on or off while the  
Disc Navigator is displayed.  
DVD  
• See also the Progressive Setting on page 40.  
Some DVD-Video discs feature subtitles in several lan-  
guages. See the disc’s sleeve notes for details.  
• On theAustralian model, progressive scanning can be used  
with NTSC format discs. To do this, set the PAL Output  
Setting to “AUTO,” start playback of an NTSC disc, stop  
playback, and then turn on the Progressive Scanning func-  
tion.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback—Continued  
To resume playback from last mem-  
ory point, select “Yes,and then  
press [ENTER].  
To start playback from the beginning,  
select “No,” and then press [ENTER].  
4
Remote controller  
ENTER  
DV-CP702  
To start playback from the beginning and  
delete the last memory point, select  
“Memory Clear,” and then press  
[ENTER].  
DISPLAY  
LAST MEMORY  
STOP  
PLAY/ENTER  
ON STANDBY  
OPEN/  
CLOSE  
SEARCH LAST  
M
MEMORY CHAIN MODE  
Notes:  
REPEAT  
3
LAST M  
ENTER  
1
4
7
2
5
8
0
• The Last Memory function can store the settings for up to  
six DVD-Video discs. When you set the Last Memory  
function for a seventh disc, the first disc’s settings are lost.  
-
B
A
6
9
RANDOM  
DISPLAY  
+
10  
CLEAR  
DISPLAY  
TOP MENU  
MENU  
• The Last Memory function can remember the settings for  
oneVideo CD, and those settings will be lost when another  
disc is selected.  
ENTER  
RETURN  
SETUP  
AUDIO ANGLE SUBTITLE  
• The Last Memory function may not work properly with  
some PBC Video CDs.  
STEP/SLOW  
• The Last Memory function will not work while a menu is  
being displayed onscreen.  
Using Last Memory  
• The Last Memory function may not work with some  
DVD-Video discs.  
DVD  
VCD  
• Even if you select another disc, or inadvertently turn off the  
DV-CP702 during playback, you can resume playback  
from the same point when you select the disc again.  
With the Last Memory function you can resume playback  
from where you left off even if another disc has been selected  
or the disc has been removed. Last Memory also remembers  
the soundtrack and subtitle languages that you were using.  
During playback, press the  
[LAST M] button.  
1
The last memory point for the disc is  
stored, the LAST indicator appears, and  
“LAST MEM” appears on the display.  
Remote controller  
If the [LAST M] button is pressed again,  
the last memory point will be updated.  
LAST M  
To stop playback, press the Stop  
[ ] button once or twice.  
2
At this point you may choose to  
play another disc, or to turn off the  
DV-CP702.  
Remote controller  
To resume playback,select the disc  
and press the Play [ ] button.  
3
The Last Memory dialog box appears, as  
shown.  
Last Memory is set.  
Remote controller  
Start playback from memory location ?  
Yes  
No  
Memory Clear  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback—Continued  
Displaying Information  
You can display various information about the current disc,  
title, chapter, or track as follows.  
During playback, press the [DIS-  
PLAY] button.  
1
Various information appears onscreen.  
The operating status (e.g., Stop, Play,  
Resume), disc number, and disc type  
information is displayed along the top of  
Remote controller  
DISPLAY  
the screen.  
The other information depends on the  
type of disc currently selected, as follows:  
DVD-Video: Current title number, total  
number of titles on disc, elapsed title time,  
remaining title time, total title time,  
selected soundtrack, selected subtitle, and  
the number of available camera angles.  
Video CD, audio CD: Current track  
number, total number of tracks, elapsed  
track time, remaining track time, and total  
track time.  
MP3/WMA disc: Track name, current  
track, elapsed track time, folder name,  
current folder, total number of tracks,  
total number of folders.  
Press the [DISPLAY] button again  
to see more information.  
2
DVD-Video: Current chapter number,  
total number of chapters in title, elapsed  
chapter time, remaining chapter time,  
total chapter time, and bit rate.  
Remote controller  
DISPLAY  
Video CD, audio CD: Current track  
number, total number of tracks, elapsed  
disc time, remaining disc time, and total  
disc time. (Does not work with PBC  
Video CDs.)  
MP3/WMA disc: Title, artist name,  
album name, year, genre, comment.  
Press the [DISPLAY] button again  
to cancel the information display.  
3
Remote controller  
DISPLAY  
If the current disc is an MP3/WMA  
disc, and you want to open the Disc  
Navigator, press the [DISPLAY] but-  
4
ton again.  
Remote controller  
DISPLAY  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702  
This chapter explains the various functions and settings of  
the onscreen setup menus.  
The following table lists all the functions and settings, with a  
brief description and page number where you can find full  
details.  
Functions and settings are arranged into six menus: Picture,  
Audio, Language, Display, Operation Setting, and Initial.  
Menu  
Setting  
Description  
Page #  
TV Shape  
Select a picture format to match the aspect ratio of your TV.  
Adjust the picture quality for interlaced scanning.  
Adjust the picture quality for progressive scanning.  
39  
40  
40  
Picture  
Interlaced Setting  
Progressive Setting  
PAL Output Setting  
(Australian model only)  
Specify how the DV-CP702 outputs video signals when playing NTSC discs.  
40  
Dolby Digital Out Select whether or not the DV-CP702 downmixes Dolby Digital digital audio.  
Linear PCM Out Select whether or not the DV-CP702 downsamples 96 kHz digital audio.  
41  
41  
41  
41  
Audio  
Digital Out  
MPEG Out  
Digital Out  
Select whether or not the DV-CP702 downmixes MPEG digital audio.  
Turn on or off the digital audio outputs.  
Dynamic Range Control  
(Dolby Digital only)  
Set the Dynamic Range function.  
41  
On-Screen Language  
Disc Menu Language  
Audio Language  
Subtitle  
Select a language for the onscreen setup menus and messages.  
Select your preferred language for disc menus.  
Select your preferred language for soundtracks.  
Select your preferred language for subtitles.  
Turn on or off onscreen messages and indicators.  
Select a color for onscreen setup menus and messages.  
Select a background color for when playback is stopped.  
Set the Screen Saver function.  
41  
42  
42  
42  
42  
42  
42  
43  
43  
43  
43  
Language  
Display  
On-Screen Display  
On-Screen Display Color  
Background  
Screen Saver  
Pause/Still  
Select Auto or Frame for still pictures.  
Operation  
Setting  
Parental Lock  
PBC  
Set the Parental Lock function.  
Turn on or off PBC (Playback Control) functions for Video CDs.  
Auto Power Off  
Set the Auto Power Off function.  
44  
TV Shape  
Initial Setup  
This menu appears automatically the very first time you turn on your DV-CP702.  
(These settings are available in other menus.)  
On-Screen Language  
20  
Digital Out  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702—Continued  
1
4
7
2
5
8
0
3
Picture Menu  
RANDOM  
DISPLAY  
9
TV Shape  
+
10  
CLEAR  
TOP MENU  
MENU  
DVD  
ENTER  
/
ENTER  
With this setting you can select a picture format to match the  
aspect ratio of your TV.  
RETURN  
SETUP  
SETUP  
AUDIO ANGLE SUBTITLE  
4:3 Letter box (default): Choose this option if you have  
a standard TV (4:3 aspect ratio). When you watch wide-  
screen DVD-Video movies, the entire picture will be vis-  
ible and there will be black bars at the top and bottom of  
the screen, as shown.  
STEP/SLOW  
Using the Onscreen Setup Menus  
This section explains how to use the onscreen setup menus.  
Widescreen DVD movie  
on standard TV with  
"4:3 Letter box" setting  
Turn on your DV-CP702 and TV.  
On your TV, select the video input to  
which the DV-CP702 is connected.  
1
4:3 Normal (Pan & Scan): Choose this option if you  
have a standard TV (4:3 aspect ratio) and want to use the  
full height of the screen when watching widescreen  
DVD-Video movies. In order to use the full height of the  
screen, the picture will be cropped on both sides, as  
shown. This option won’t work with discs that don’t support  
pan and scan.  
Press the [SETUP] button.  
The onscreen setup menu appears, as  
shown.  
2
Remote controller  
SETUP  
Picture  
TV Shape  
Interlaced Setting  
Progressive Setting  
Widescreen DVD movie  
on standard TV with  
"4:3 Normal" setting  
16:9 Widescreen: Choose this option if you have a wide-  
screen TV (16:9 aspect ratio).  
Use the remote controller’s naviga-  
tion buttons to navigate the menus.  
3
Remote controller  
Use the Left/Right [ ]/[ ] buttons to  
move left or right. Use the Up/Down [ ]/  
[ ] buttons to move up or down.  
16:9 Compressed: Choose this option if you have a  
widescreen TV (16:9 aspect ratio) and the picture appears  
stretched when watching programs in 4:3 format, as  
shown. Some widescreen TVs have a setting to correct  
this. If your TV doesn’t, and 4:3 programs appear  
stretched, select this option to correct the problem.  
ENTER  
When you’ve selected an item,  
4
press the [ENTER] button to see  
the available options.  
Remote controller  
4:3 program on widescreen TV  
with "16:9 Compressed" setting  
ENTER  
Notes:  
Use the navigation buttons to  
select the options, and press the  
[ENTER] button to confirm your  
selection.  
5
• With some DVD-Video discs this setting may have no  
effect. See the disc’s sleeve notes to see which picture for-  
mat is used.  
Remote controller  
ENTER  
When you’ve finished, press the  
[SETUP] button again.  
6
Remote controller  
The onscreen setup menu closes.  
SETUP  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702—Continued  
There are three memories (1, 2, 3) for storing your favorite  
settings. You could, for example, use one for daytime view-  
ing (e.g., sun shining through window) and one for nighttime  
viewing (e.g., curtains drawn, lights down).  
-
4
5
8
0
9
RANDOM  
DISPLAY  
7
+
10  
CLEAR  
TOP MENU  
MENU  
ENTER  
/
ENTER  
RETURN  
SETUP  
Parameter  
Contrast  
Brightness  
Color  
Range  
SETUP  
AUDIO ANGLE SUBTITLE  
–7...0...+7  
–7...0...+7  
–7...0...+7  
–7...0...+7  
0...+8  
3
EP/SLO
Tint  
Interlaced Setting  
Sharpness  
Skin Tone Compensation –7...0...+7  
DVD  
With these settings you can adjust various picture quality  
parameters for interlaced scanning, including black level,  
contrast, brightness, color, and so on.  
Select Progressive Setting 1, 2, or  
3, and then press the [ENTER] or  
Right [ ] button.  
1
Remote controller  
There are three memories (1, 2, 3) for storing your favorite  
settings. You could, for example, use one for daytime view-  
ing (e.g., sun shining through window) and one for nighttime  
viewing (e.g., curtains drawn, lights down).  
The parameters appear onscreen.  
ENTER  
The parameters are as follows.  
Use the Up/Down [ ]/[ ] buttons to  
select the parameters, press the  
[ENTER] button, and use the Left/  
Right [ ]/[ ] buttons to set them.  
2
Parameter  
Contrast  
Brightness  
Color  
Range  
Remote controller  
–7...0...+7  
–7...0...+7  
–7...0...+7  
–7...0...+7  
0...+8  
ENTER  
Tint  
Sharpness  
Skin Tone Compensation –7...0...+7  
When you’ve finished, press the  
[SETUP] button.  
The settings are stored.  
3
Dark, Normal (U.S. model only)  
Video Black Level  
Remote controller  
Normal, Light (Australian model only)  
SETUP  
Select Interlaced Setting 1, 2, or 3,  
and then press the [ENTER] or  
Right [ ] button.  
1
Remote controller  
The parameters appear onscreen.  
Notes:  
ENTER  
• These settings are used only when the Progressive function  
is on.  
Use the Up/Down [ ]/[ ] buttons to  
select the parameters, press the  
[ENTER] button, and use the Left/  
Right [ ]/[ ] buttons to set them.  
2
PAL Output Setting (Australian model only)  
Remote controller  
DVD  
VCD  
With this setting you can specify how the DV-CP702 outputs  
video signals when playing NTSC format DVD-Video discs  
or Video CDs.  
ENTER  
AUTO (default): Use this option to watch PAL and NTSC  
format discs. The DV-CP702 does not convert the video  
format. When you play a PAL disc, the video output will  
be PAL format.And when you play an NTSC disc, it’ll be  
NTSC format. Your TV must support NTSC playback in  
order to watch NTSC format discs.  
When you’ve finished, press the  
[SETUP] button.  
The settings are stored.  
Remote controller  
3
SETUP  
Notes:  
PAL: Use this option if your TV doesn’t support NTSC  
playback, or the picture is distorted when watching  
NTSC discs. The DV-CP702 will convert NTSC format  
video signals to PAL-compatible format.  
• These settings are used only when the Progressive function  
is off.  
Notes:  
Progressive Setting  
• This setting can be changed only when playback is  
stopped.  
DVD  
With these settings you can adjust various picture quality  
parameters for progressive scanning, including black level,  
contrast, brightness, color, and so on.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702—Continued  
Digital Out  
Audio Menu  
DVD  
VCD  
CD  
MP3  
WMA  
With this setting you can turn the coaxial and optical digital  
audio outputs on or off.  
Digital Out  
With these settings you can specify how the DV-CP702 out-  
puts digital audio signals. The options you choose will  
depend on the type of AV component that you connect to the  
DV-CP702’s digital audio outputs.  
Depending on how you connect the DV-CP702 to your other  
AV components, there may be situations where it’s helpful to  
be able to turn off the digital audio outputs.  
On (default): Digital audio signals are output by the  
coaxial and optical digital audio outputs.  
Dolby Digital Out  
DVD  
Off: Nothing is output by the coaxial and optical digital  
audio outputs.  
With this setting you can configure the DV-CP702 to output  
Dolby Digital audio as it is or downmix it to 2-channel PCM.  
Notes:  
If you’re connecting the DV-CP702’s digital audio outputs to  
an AV component with a built-in Dolby Digital decoder,  
select Dolby Digital. If you’re connecting to a hi-fi amp with  
a digital input, an AV receiver with a built-in Dolby Pro  
Logic decoder, or an external D/A converter, select Dolby  
Digital > PCM.  
• This setting has no effect on the analog audio outputs.  
Dynamic Range Control (Dolby Digital only)  
DVD  
Dolby Digital (default): Dolby Digital audio is output as  
it is.  
With the Dynamic Range Control function you can reduce  
the dynamic range of Dolby Digital material so that you can  
still hear quiet parts even when listening at low volume lev-  
els—ideal for watching movies late at night when you don’t  
want to disturb anyone.  
Dolby Digital > PCM: Dolby Digital audio is downmixed  
and output as 2-channel PCM digital audio.  
Linear PCM Out  
DVD  
Off (default): The full dynamic range is preserved.  
On: The dynamic range of Dolby Digital material is com-  
pressed.  
With this setting you can configure the DV-CP702 to output  
digital audio with higher sampling rates (e.g., 96 kHz) as it is  
or downsample it to 48 kHz.  
Notes:  
• The impact of the Dynamic Range Control function  
depends on the Dolby Digital material that you are playing  
and with some material there will be little or no effect.  
If the AV component you connect to the DV-CP702’s digital  
audio outputs supports 96 kHz digital audio, select Down  
Sample Off. Otherwise, select Down Sample On.  
Down Sample On (default): 96 kHz digital audio is  
downsampled and output at 48 kHz.  
Language Menu  
Down Sample Off: 96 kHz digital audio is output as it is.  
On-Screen Language  
Notes:  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
• Some copy-protected DVD-Video discs may use 96 kHz  
digital audio only for A/D conversion to the analog audio  
outputs.  
With this setting you can select a language for the onscreen  
setup menus and messages.  
• With some discs, even if you select Down Sample Off, the  
digital audio will be downsampled to 48 kHz, and in some  
cases may not be output by the DV-CP702’s digital audio  
outputs.  
English (default): English.  
Français: French.  
Español: Spanish.  
Deutsch: German.  
Italiano: Italian.  
MPEG Out  
DVD  
VCD  
With this setting you can configure the DV-CP702 to output  
MPEG digital audio as it is or downmix it to PCM.  
If you’re connecting the DV-CP702’s digital audio outputs to  
an AV component with a built-in MPEG decoder, select  
MPEG. Otherwise, select MPEG > PCM.  
MPEG (default): MPEG digital audio is output as it is.  
MPEG > PCM: MPEG digital audio is downmixed and  
output as PCM digital audio.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702—Continued  
Disc Menu Language  
Subtitle  
DVD  
DVD  
With this setting you can select your preferred language for  
disc menus. When you play a DVD-Video disc with multiple  
language disc menus, your preferred language will be  
selected automatically.  
With this setting you can select your preferred language for  
subtitles. When you play a DVD-Video disc with multiple  
language subtitles, your preferred language will be selected  
automatically.  
English (default):  
English (default):  
French:  
French:  
Spanish:  
Spanish:  
German:  
German:  
Italian:  
Italian:  
Others: See “Selecting Other Languages” on page 44.  
No Subtitle: No subtitles will be displayed. This option  
is useful with DVD-Video discs that always display sub-  
titles.  
Notes:  
• Not all DVD-Video discs have menus in multiple lan-  
guages.  
Others: See “Selecting Other Languages” on page 44.  
• Even if a DVD-Video disc has menus in multiple lan-  
guages, this setting may not always work.  
Notes:  
• Not all DVD-Video discs have subtitles.  
• If a DVD has only one menu language, that will be used.  
• Even if a DVD-Video disc has subtitles in multiple lan-  
guages, this setting may not always work.  
• With some DVD-Video discs you can select languages  
from a menu.  
• If a DVD has only one subtitle language, that will be used.  
• With some DVD-Video discs you can select subtitles from  
a menu.  
Audio Language  
DVD  
Display Menu  
With this setting you can select your preferred language for  
soundtracks. When you play a DVD-Video disc with multi-  
ple language soundtracks, your preferred language will be  
selected automatically.  
On-Screen Display  
DVD  
With this setting you can turn on or off onscreen messages,  
such as “Play,” “Stop,” and “Resume.”  
English (default):  
French:  
Off: Onscreen messages are not displayed.  
Spanish:  
On (default): Onscreen messages are displayed.  
German:  
Italian:  
On-Screen Display Color  
Others: See “Selecting Other Languages” on page 44.  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
Notes:  
• Not all DVD-Video discs have soundtracks in multiple lan-  
guages.  
With this setting you can set the color and theme of the Disc  
Navigator window.  
• Even if a DVD-Video disc has soundtracks in multiple lan-  
guages, this setting may not always work.  
Sapphire (default):  
Pearl:  
• If a DVD has only one soundtrack, that will be used.  
Amethyst:  
Garnet:  
• With some DVD-Video discs you can select languages  
from a menu.  
Background  
DVD  
VCD  
CD  
MP3  
WMA  
With this setting you can select the color of the background  
that’s displayed when the DV-CP702 is stopped.  
Blue:  
Gray:  
Graphic (default): The theme picture specified for the  
On-Screen Display Color setting is used.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702—Continued  
Screen Saver  
Use the Up/Down [ ]/[ ] buttons to  
specify the parental lock level from  
1 through 8, and then press  
[ENTER].  
3
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
Remote controller  
With the Screen Saver function you can protect your TV  
against screen burn-in, which can occur when the same  
image or menu is displayed for a long time.  
ENTER  
The parental lock is now set.  
The parental lock levels conform to U.S.  
movie ratings as follows:  
Off: Screen saver off.  
On (default): Screen saver on.  
• Level 7: NC-17  
• Level 6: R  
• Level 4: PG13  
• Level 3: PG  
• Level 1: G  
When the Screen Saver function is set to On, and DVD-Video  
or Video CD playback is paused or stopped for 15 minutes,  
the Screen Saver function automatically displays a moving  
image.  
Once the screen saver has been activated, you can cancel it  
by pressing either the Play [ ] button or Pause [ ] button.  
When you’ve finished, press the  
[SETUP] button.  
The settings are stored.  
4
Notes:  
Remote controller  
• The Screen Saver function also works with audio CDs and  
MP3/WMA discs. If you leave playback paused for five  
minutes, the screen saver will activate.  
SETUP  
Operation Setting Menu  
Notes:  
• When entering a security code, you can use the [CLEAR]  
button to delete the numbers entered so far, if necessary.  
Pause/Still  
DVD  
• This setting can be changed only when playback is  
stopped.  
The Pause/Still setting determines how still pictures are dis-  
played when DVD-Video playback is paused or when using  
frame-by-frame playback.  
• Once this setting has been turned on and a security code  
set, if you want to turn off parental lock, or change the  
parental lock level, you’ll be prompted to enter the security  
code.  
Auto (default): A frame or field is displayed depending  
on the disc.  
• Not all discs use parental lock. See the disc’s sleeve notes  
for details.  
Frame: A frame is displayed.  
TV pictures are made up of fields, and there are two fields per  
picture (frame). In general, the Frame option will provide the  
best picture quality, although in some cases the picture may  
appear slightly blurred. Since a field has only half as much  
information, the picture quality will be lower, but it won’t be  
blurred.  
• Discs with parental lock may cut certain scenes, replace  
certain scenes with children-friendly scenes, or prevent  
playback of the entire disc.  
• If you forget the security code, instead of entering the num-  
bers, press the STOP [ ] button four times.  
• When using a disc that uses parental control to restrict  
playback, occasionally, depending on the DV-CP702’s  
operating status, you may not be able to remove the disc by  
using the [OPEN/CLOSE] button. If this does occur, close  
the disc tray, use the [DISC SKIP] button to select another  
disc bay, open the tray again, and then remove the disc.  
Parental Lock  
DVD  
With the Parental Lock function you can block access to cer-  
tain scenes that the authors have flagged as being unsuitable  
for children.  
PBC  
Select Parental Lock–>On, and  
then press the [ENTER] button.  
1
VCD  
Remote controller  
With the PBC setting you can enable or disable PBC (Play-  
back Control) functions on Video CDs.  
The Security Code box appears onscreen.  
ENTER  
Off: PBC functions disabled.  
On (default): PBC functions enabled.  
Use the number buttons to enter a  
4-digit security code, and then  
press [ENTER].  
The Level box appears onscreen.  
Notes:  
2
• PBC functionality varies from disc-to-disc. See the disc’s  
sleeve notes for details.  
Remote controller  
ENTER  
• Not all PBC Video CDs use all of the PBC functions sup-  
ported by the DV-CP702  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the DV-CP702—Continued  
Auto Power Off  
Language Code List  
DVD  
VCD  
CD  
MP3  
WMA  
JPEG  
Use this list when specifying other languages.  
With the Auto Power Off function the DV-CP702 will turn  
itself off automatically if about 20 minutes have elapsed  
without any operation after stopping playback.  
Language  
Japanese  
English  
French  
German  
Italian  
Code  
JA  
EN  
FR  
DE  
IT  
Language  
Kirghiz  
Latin  
Code  
KY  
LA  
LN  
LO  
LT  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NO  
OC  
OM  
OR  
PA  
Lingala  
Off (default): Auto Power Off function is off.  
Laothian  
Lithuanian  
Latvian  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Malay  
Maltese  
Burmese  
Nauru  
On: Auto Power Off function on.  
Spanish  
Chinese  
Dutch  
Portuguese  
Swedish  
Russian  
Korean  
ES  
ZH  
NL  
PT  
SV  
RU  
KO  
EL  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EO  
ET  
EU  
FA  
FI  
Initial Setup Menu  
This menu appears automatically the very first time you turn  
on the DV-CP702. See “First Time Setup” on page 20 for  
more information.  
Greek  
Afar  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Selecting Other Languages  
Nepali  
This section explains how to select other languages for disc  
menus, audio, and subtitles.  
Norwegian  
Occitan  
Oromo  
Oriya  
Panjabi  
Polish  
SelectOthersfrom the Disc Menu  
Language, Audio Language, or  
Subtitle menu, and then press  
[ENTER].  
1
Remote controller  
PL  
Pashto, Pushto  
Quechua  
Rhaeto-Romance  
Kirundi  
Romanian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Sinhalese  
Slovak  
Slovenian  
Samoan  
Shona  
PS  
QU  
RM  
RN  
RO  
RW  
SA  
SD  
SG  
SH  
SI  
ENTER  
The language code boxes appear.  
Use the remote controller’s Left/  
Right [ ]/[ ] buttons to select the  
code boxes.  
Use the Up/Down [ ]/[ ] buttons to  
2
Remote controller  
ENTER  
enter a language code.  
SK  
SL  
See adjacent table for language codes.  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SW  
TA  
When you’ve finished, press the  
[ENTER] button.  
3
Somali  
Remote controller  
Fiji  
FJ  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Faroese  
Frisian  
Irish  
Scots-Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
ENTER  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Hebrew  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Kashmiri  
Kurdish  
HR  
HU  
HY  
IA  
IE  
IK  
IN  
IS  
IW  
JI  
JW  
KA  
KK  
KL  
KM  
KN  
KS  
KU  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Turkish  
Tsonga  
Tatar  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Wolof  
Xhosa  
Yoruba  
VO  
WO  
XH  
YO  
ZU  
Zulu  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Symptom  
Possible cause  
Remedy  
Connect the power cord to a suitable wall outlet  
(page 20).  
The power cord is not connected.  
Can’t turn on the DV-  
CP702?  
Turn off the DV-CP702, wait five seconds, then try  
turning it on again. If that fails, disconnect the  
power cord from the wall outlet, wait five seconds,  
reconnect it, then try turning it on again.  
External interference is affecting the DV-  
CP702’s digital circuitry.  
The wrong input source is selected on your On your TV, select the input to which the DV-  
TV.  
CP702 is connected (page 17).  
No picture?  
No sound?  
Check the video cable and correct as necessary  
(page 17).  
The video cable is not connected properly.  
The wrong input source is selected on your On your hi-fi amp or AV receiver, select the input  
hi-fi amp or AV receiver.  
to which the DV-CP702 is connected (page 18).  
Check the audio cable and correct as necessary  
(page 18).  
The audio cable is not connected properly.  
The hi-fi amp or AV receiver connected to  
the DV-CP702’s audio outputs is not on.  
Turn on the hi-fi amp or AV receiver.  
Check the Digital Out setting and correct as nec-  
essary (page 41).  
The Digital Out setting is incorrect.  
The disc is dirty.  
Remove the disc and clean it (page 9).  
The picture distorts  
occasionally?  
You’re using the Fast Forward or Fast  
Reverse function.  
A little picture distortion may occur when using  
these functions. This is normal.  
The DV-CP702 is connected to your TV via  
aVCR or other video equipment and its copy  
protection system is affecting the picture.  
Picture instability or  
noise?  
Connect the DV-CP702 directly to your TV  
(page 17).  
No discs loaded.  
Load some discs (page 21).  
The selected disc cannot be played because  
it’s incompatible.  
Load only compatible discs (page 7).  
Load the disc the correct way up (page 21).  
The disc is upside down.  
The disc is not centered in the disc bay.  
The disc is dirty.  
Can’t start playback?  
Place the disc in the center of the disc bay  
(page 21).  
Remove the disc and clean it (page 9).  
The selected disc has parental lock and the  
Parental Lock function is on.  
Turn off the Parental Lock function (page 43).  
The disc is not ISO9660 Level 2 format.  
The disc has not been finalized.  
Use only ISO9660 Level 2 format discs (page 8).  
Finalize the disc (page 8).  
Can’t play MP3/WMA/  
JPEG discs?  
MP3 files without a “.mp3” or “.MP3” file-  
name extension are not recognized.  
Can’t select MP3 files?  
Use the correct filename extension (page 8).  
WMA files without a “.wma” or “.WMA” or  
“.ASF” filename extension are not recog-  
nized.  
Use the correct filename extension (page 8).  
Don’t use the copyright option (page 8).  
Can’t play WMA files?  
The WMA file’s copyright option is on.  
JPEG files without a “.jpg” or “.JPG” or  
“.JPEG” filename extension are not recog- Use the correct filename extension (page 8).  
nized.  
Only Baseline JPEG files are supported.  
Use Baseline JPEG files (page 8).  
Progressive JPEG files are not.  
Can’t view JPEG files?  
Only JPEG files with the following bright-  
ness/color difference ratios are supported:  
4:4:4, 4:2:2, and 4:1:1.  
Use JPEG files with the supported ratio (page 8).  
Use JPEG files that are less than 5 megabytes  
(page 8).  
The JPEG file is too big.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting—Continued  
Symptom  
Possible cause  
Remedy  
The message “NO  
PLAY” appears on the  
display?  
The disc is dirty.  
Remove the disc and clean it (page 8).  
Turn off the DV-CP702, wait five seconds, then  
turn it on again. If that doesn’t resolve the issue,  
disconnect the power cord from the wall outlet,  
wait five seconds, reconnect it, then try again.  
Buttons on the DV-  
CP702 and remote con- anomalies, such as static electricity, can  
troller don’t work?  
Power supply voltage fluctuations and other  
interfere with normal operation.  
There are no batteries in the remote  
controller.  
Install new batteries (page 15).  
The batteries are flat.  
Replace with new batteries (page 15).  
Check the batteries and correct as necessary  
(page 15).  
The batteries are installed incorrectly.  
You’re not pointing the remote controller at Point the remote controller at the DV-CP702’s  
Buttons on the DV-  
CP702 work OK but  
those on the remote con-  
troller don’t?  
the DV-CP702’s remote sensor.  
remote sensor (page 15).  
Use the remote controller closer to the DV-CP702  
(page 15). The remote controller has a range of  
approximately 16 ft. (5 meters).  
You’re too far away from the DV-CP702.  
Make sure that the DV-CP702 is not subjected to  
direct sunshine or inverter-type fluorescent lights.  
Relocate if necessary.  
A strong light source is interfering with the  
DV-CP702’s remote sensor.  
If the DV-CP702 is installed in a cabinet  
with colored glass doors, the remote control- Open the doors, or use a cabinet without colored  
ler may not work reliably when the doors are glass.  
closed.  
Abnormal Behavior  
The DV-CP702 contains a microcomputer for signal processing and control functions. In very rare situations, severe interfer-  
ence, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen,  
unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again. Alternatively, press and  
hold the STOP [ ] button until “RESET” appears on the display (about 10 seconds).  
Restoring the Default Settings  
To reset the DV-CP702 to its factory defaults, turn it on and, while holding down the STOP [ ] button, press the [STANDBY/  
ON] button. “INITIALIZE” appears on the display. When the reset is complete, “COMPLETE” is displayed, and the DV-  
CP702 enters Standby mode.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Standard NTSC (U.S. model), PAL/AUTO (Australian model)  
1 (U.S. model), 4 (Australian model)  
Video system  
Region code  
Laser  
Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD)  
4 Hz–22 kHz @ 48 kHz sampling rate  
4 Hz–44 kHz @ 96 kHz sampling rate  
DVD linear audio  
CD audio  
Frequency response  
4 Hz–20 kHz  
100 dB  
Signal-to-noise ratio (digital audio)  
Audio dynamic range (digital audio)  
Harmonic distortion (digital audio)  
Wow and flutter  
95 dB  
0.006%  
Below measurable level  
5° to 35° C (41° F to 95° F)  
Install horizontally  
Temperature  
Operating conditions  
Installation  
Y: 1.0 V (p–p), 75 N, negative sync, RCA/phono x3  
PB/PR: 0.7 V (p–p), 75 N  
COMPONENT VIDEO  
Y: 1.0 V (p–p), 75 N, negative sync, 4-pin mini DIN x1  
Video outputs  
Audio outputs  
S VIDEO (S-Video)  
C: 0.286 V (p–p), 75 N  
1.0 V (p–p), 75 N, negative sync, RCA/phono x1  
–22.5 dBm, optical connector x1  
VIDEO (composite video)  
OPTICAL  
0.5 V (p–p), 75 N, RCA/phono x1  
COAXIAL  
2.0 V rms, 440 N, RCA/phono x2  
ANALOG  
120 V AC, 60 Hz (U.S. model)  
230–240 V AC, 50/60 Hz (Australian model)  
Power supply  
13 W  
Power consumption  
Power consumption in Standby  
mode  
0.95 W (U.S. model)  
0.96 W (Australian model)  
General  
5.3 kg (11.7 lbs.)  
Weight  
435 X 91 X 432 mm (17-1/8 X 3-9/16 X 17)  
Dimensions (W x H x D)  
Specifications and features subject to change without notice.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN  
Tel: 072-831-8023 Fax: 072-831-8124  
ONKYO U.S.A. CORPORATION  
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.  
Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com  
ONKYO EUROPE ELECTRONICS GmbH  
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY  
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net  
ONKYO CHINA LIMITED  
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,  
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039  
HOMEPAGE  
SN 29343662  
(C) Copyright 2004 ONKYO CORPORATION Japan. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I0402-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Freezer KFN 14927 SD User Manual
Miller Electric Welding System HWY 210 User Manual
Multi Tech Systems Network Card CF220 User Manual
Nokia Headphones BH 207 User Manual
Nortel Networks Network Card AA1419005 User Manual
Oster Rice Cooker 4715 User Manual
Panasonic Car Stereo System C1303U User Manual
Panasonic Telephone Accessories KX TS560MX User Manual
ParaBody Home Gym 874106 User Manual
ParaBody Home Gym 893101 User Manual