Contents
Before using
Important Safeguards........................ 2
Precautions ....................................... 3
Features............................................. 4
Supplied accessories......................... 4
Before operating this unit................. 5
System connections .......................... 6
Compact Disc Player
DX-7222
Instruction Manual
Operation
Playing CDs...................................... 7
Using the memory function............ 10
Useful Functions............................. 12
DX-7222
Other informations
Control positions and names .......... 14
Precautions for handling
the Compact Disc (CD) ............... 15
Troubleshooting Guide................... 16
Specifications ................................. 16
Thank you for purchasing the Onkyo CD player.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new CD player.
Please retain this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
For U.S. model
For British model
The laser is covered by a housing which prevents exposure during
operation or maintenance. However, this product is classified as a
Laser Product by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and Drug Administra-
tion. According to their regulations 21 CFR section 1002.30, all
manufactures who sell Laser Products must maintain records of
written communications between the manufacturer, dealers and
customers concerning radiation safety. If you have any complaints
about instructions or explanations affecting the use of this product,
please feel free to write to the address on the back page of this
manual. When you write us, please include the model number and
serial number of your unit.
Replacement and mounting of an AC plug on the power supply cord
of this unit should be performed only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the termi-
nal which is marked with the letter L or coloured red.
In compliance with Federal Regulations, the certification, identifi-
cation and the period of manufacture are indicated on the rear
panel.
IMPORTANT
A 5 amp fuse is fitted in this plug. Should the fuse need to be
replaced, please ensure that the replacement fuse has a rating of 5
amps and that it is approved by ASTA or BSI to BS1362. Check for
the ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME, THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
If in any doubt, please consult a qualified electrician.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For Canadian model
CAUTION: THIS DIGITAL APPARATUS DOES NOT
EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMIS-
SION FROM DIGITAL APPARATUS SET OUT IN THE RADIO
INTERFERENCE REGULATIONS OF THE CANADIAN
DEPARTMENT OF COMMUNICATIONS.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
Declaration of Conformity
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
Modele pour les Canadien
ATTENTION: L'INTERFÉRENCE RADIO ÉLECTRIQUE
GÉNÉRÉE PAR CET APPAREIL NUMÉRIQUE DE TYPE B NE
DÉPASSE PAS LES LIMITES ÉNONCÉES DANS LE RÈGLE-
MENT SUR LES PERTURBATIONS RADIO ÉLECTRIQUES,
SECTION APPAREIL NUMÉRIQUE, DU MINISTÈRE DES
COMMUNICATIONS.
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3 (or EN60555-2, -3)
Sur les modèles dont la fiche est polarisée:
GERMERING, GERMANY
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
K.OTSU
ONKYO EUROPE ELECTRONICS GmbH
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Features
■ 36-Track Random Memory (Remote controller only)
■ 8-times oversampling digital filter
■ Shuffle play (Remote controller only)
■ 20-track music calendar
1. Warranty Claim
You can find the serial number on the rear panel of this unit. In case
of warranty claim, please report this number.
2. Recording Copyright
Recording of copyrighted material for other than personal use is
illegal without permission of the copyright holder.
■ Time edit (calculates number of tracks that will fit on a
cassette) (Remote controller only)
3. Power
WARNING
■ 10-key direct track access (Remote controller only)
■ Headphone jack with volume control
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
■ Peak search (Remote controller only)
The voltage of the available power supply differs according to
country or region. Be sure that the power supply voltage of the area
where this unit will be used meets the required voltage (e.g., AC
230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.
■ Memory and Memory reverse
A convenient feature that lets you easily eliminate tracks you
don’t want to hear or record.
■ Next selection (Remote controller only)
Worldwide models are equipped with a voltage selector to conform
to local power supplies. Be sure to set this switch to match the volt-
age of the power supply in your area before plugging in the unit.
■ Five mode repeat function: entire side, single track, A-B,
memory and shuffle
■ Two optical digital outputs
4. Do not touch this unit with wet hands
■
Compatible Remote Control Supplied
Do not handle this unit or power cord when your hands are wet or
damp. If water or any other liquid enters the case, take this unit to
an authorized service center for inspection.
5. Location of this unit
Place this unit in a well-ventilated location.
Memory Preservation
Take special care to provide plenty of ventilation on all sides of this
unit especially when it is placed in an audio rack. If ventilation is
blocked, this unit may overheat and malfunction.
This unit does not require memory preservation batteries. A
built-in memory power back-up system preserves the contents
of the memory during power failures and even when the
POWER switch is set to off. The POWER switch must be set to
on in order to charge the back-up system.
The memory preservation period after the unit has been turned
off varies depending on climate and placement of the unit. On
the average, memory contents are protected over a period of a
few weeks after the last time the unit has been turned off. This
period is shorter when the unit is exposed to a highly humid cli-
mate.
Do not expose this unit to direct sunlight or heating units as this
unit’s internal temperature may rise and shorten the life of the
pickup.
Avoid damp and dusty places and places directly affected by vibra-
tions from the speakers. In particular, avoid placing the unit on or
above one of the speakers.
Be sure this unit is placed in a horizontal position. Never place it
on its side or on a slanted surface as it may malfunction.
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause reception interference
resulting in some noise in the TV or tuner output.
6. Care
Supplied accessories
From time to time you should wipe the front and rear panels and the
cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a
weak solution of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with a clean cloth.
Check that the following accessories are supplied with this unit.
Do not use rough material, thinners, alcohol or other chemical sol-
vents or cloths since these could damage the finish or remove the
panel lettering.
DI
S
P
L
A
Y
1
5
9
2
4
8
7
0
3
R
+10
E
P
6
E
A
T
P
E
M
E
A
K
M
S
E
O
R
A
R
Y
C
H
S
E
N
C
E
C
L
A
L
E
X
－
T
E
A
B
T
IO
R
N
REMOTE CONTROLLER
02C
S
T
IM
H
U
E
F
F
E
D
7. Points to remember
L
E
IT
Audio connection cable ×1
If this unit is brought from a cold environment to a warm one or is
in a cold room that is quickly heated, condensation may form on
the pickup, preventing proper operation. In this case, remove the
disc and leave the power ON for about one hour to remove the con-
densation.
Remote controller × 1
Batteries (size AA, R6 or UM-3) × 2
When transporting this unit, be careful not to bump it.
cable × 1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operating this unit
Setting the Voltage selector (Worldwide models
only)
Worldwide models are equipped with a voltage selector to conform with
local power supplies. Be sure to set this switch to match the voltage of
the power supply in your area before plugging in the unit.
1. Determine the proper voltage for your area: 220-230 V or
120 V.
ANALOG
OUTPUT
DIGITAL
OUTPUT
DIGITAL
OUTPUT
REMOTE
CONTROL
OPTICAL
1
OPTICAL
2
COMPACT DISC PLAYER
L
MODEL NO. DX-7222
RATING:
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
R
220-230V
120V
VOLTAGE SELECTOR
2. If the preset voltage is not correct for your area, insert a screw-
driver into the groove in the switch. Slide the switch all the way
to the right (120 V) or to the left (220-230 V), whichever is
appropriate.
VOLTAGE SELECTOR
120V
220-230V
Installing the remote controller batteries
1. Remove the battery compartment cover by opening it as shown in
the illustration.
1
2. Insert two AA (R6- or UM-3)-size batteries into the battery compart-
ment. Carefully follow the polarity diagram (positive (+) and nega-
tive (–) symbols) inside the battery compartment.
3. After batteries are installed and seated correctly, replace the com-
partment cover.
Notes
2
3
• Do not mix new batteries with old batteries or different kinds of
batteries.
• To avoid corrosion, remove the batteries if the remote controller
is not to be used for a long time.
• Remove dead batteries immediately to avoid damage from cor-
rosion. If the remote controller doesn’t operate smoothly,
replace both the batteries at the same time.
• The life of the batteries supplied is about six months but this
will vary depending on usage.
Using the remote controller
Point the remote controller toward the remote control sensor.
Notes
• Place the unit away from strong light such as direct sunlight or
inverted fluorescent light which can prevent proper operation of the
remote controller.
• Using another remote controller of the same type in the same
room or using the unit near equipment which uses infrared rays
may cause operational interference.
DX-7222
Remote
control sensor
• Do not put any object such as a book on the remote controller.
The buttons of the remote controller may be pressed by mistake
and drain the batteries.
• Make sure the audio rack doors do not have colored glass. Plac-
ing the unit behind such doors may prevent proper remote con-
troller operation.
30˚
30˚
DI
SP
LA
Y
approx. 5 m
(16 feet)
1
4
5
2
6
7
3
+1
8
REP
EA
0
T
PE
AK
M
E
SE
AR
H
0
9
MO
RY
S
E
N
E
CL
EA
A－
L
E
C
X
T
B
TIO
R
N
RE
S
T
IME
M
HUF
OT
F
E
DIT
E
LE
CO
NT
RO
LL
ER
R
C-
40
2C
• If there is any obstacle between the remote controller and the
remote control sensor, the remote controller will not operate.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
Connecting other components
• Do not plug in the AC power cord until all other connections have been made.
• On each pair of input or output jacks, the jack marked R corresponds to the right channel, and the jack marked L to the left
channel. Refer to the amplifier’s instruction manual for further information on connections.
• Avoid bundling the audio connection cables with the power cord or speaker cables. Doing so may degrade sound reproduction.
• Insert the plugs and connectors securely. Remember that improper connection can result in noise, poor performance, or dam-
age to the equipment.
Improper
connection
Terminal protection caps are attached to the DIGITAL OUTPUT
terminals. Remove the cap for the terminal you wish to use when
connecting the DX-7222 to digital equipment. Replace the caps
Insert
completely
if you are not using the DIGITAL OUTPUT terminals.
ANALOG
OUTPUT
DIGITAL
OUTPUT
DIGITAL
OUTPUT
REMOTE
CONTROL
OPTICAL
1
OPTICAL
2
COMPACT DISC PLAYER
MODEL NO. DX-7222
RATING:
L
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
R
3
Audio connection cable
Connecting an Onkyo product
with connectors enables you
to use the System function.
To AC outlet
4
cable
Optical fiber cable
(not included)
1
2
2
L
R
(REC)
jack
DIGITAL IN
DIGITAL IN
Amplifier without
digital inputs
MD player, DAT, etc.
with digital inputs
Amplifier, Tuner amplifier
with digital inputs
A Connection with the amplifier
Connect the DX-7222 to the CD jacks of your amplifier.
B Connection via the digital output terminal (DIGITAL
OUTPUT)
Connection to digital equipment, such as an MD recorder or
DAT.
Use an optical cable to connect this unit to the digital input
terminal of an MD recorder or DAT in order to make digital
recordings. The optical cable should have connectors which
fit into the digital terminals.
C Connections for remote control
ONKYO
When the DX-7222 is connected to an amplifier with the Onkyo
jack, pressing the CD operation button on the amplifier’s
remote controller enables you to operate the CD player.
Note:
D Connecting the AC power cord and turning the
• The upper and lower
remote control jacks have the
power on
same function.
1. Insert the AC power cord into a wall outlet.
• Remote control operation is not possible when only the
remote control cable is connected – the audio cables must
also be connected.
2. Press the POWER ON/OFF button.
The display will light.
• An
cable equipped with a 1/8" (3.5mm) diameter min-
Note:
iature two-conductor phone plug is included with the DX-
7222 and with every tuner, compact disc player or cassette
To insert the AC power cord into an AC outlet on the rear panel of
another component, use the UNSWITCHED outlet.
tape deck with the
symbol.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
PAUSE
STOP
PLAY
DISPLAY
Disc tray
POWER
,
,
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
7
DX-7222
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A－B
SHUFFLE
OPEN/CLOSE
TROLLER
RC-402C
Normal play
Remote controller
1
3
2
1. Press the POWER button to turn on the power.
2. Press the OPEN/CLOSE button.
3. Put the disc in the disc tray, with the label side of the disc
facing up.
4. Press the OPEN/CLOSE button.
5. Press the
PLAY button.
Label side
The CD player will play the first track (track 1).
* If you want to, you can skip step 4 by pressing the
PLAY
button instead of the OPEN/CLOSE button. The disc tray
will close automatically and play track 1.
If the CD player does not start playing when the
is pressed:
PLAY button
• The disc may be upside down in the tray. Press the OPEN/
CLOSE button to open the disc tray. If you cannot read the label
on the disc, turn the disc over.
4
• Moisture may have formed inside the CD player. Remove the
disc from the disc tray and leave the power on for about one
hour to evaporate the moisture.
TRACK
1
6
2
7
3
8
4
9
5
DISC
10
Using the timer for play
OVER
Remote controller
12
11
TOTAL REMAIN
The CD player starts playing the loaded CD automatically as soon
as power is supplied. Using this feature, you can enjoy timer play
using your audio timer. For instructions on how to set the timer, see
the instruction manual supplied with the timer.
5
Contents of the display
• Before starting play after you have inserted a disc
a
b
The total number of tracks on the disc
TRACK
1
6
2
7
3
8
4
5
All of the track numbers on the disc (When the number of
tracks exceeds 20, the OVER indicator lights.)
The total playing time of the disc
DISC
9
10
12
11
NEXT
Remote controller
SINGLE ELAPSED
c
• After starting play
d
e
The track number currently being played
The next track number
f The elapsed time of the current track
The display can be changed by pressing the DISPLAY button.
Remote controller
Stopping play
Press the
STOP button.
Stopping play temporarily
Remote controller
Press the
The PAUSE indicator will light.
PAUSE button.
PAUSE
To resume play, press the
PLAY button or the
PAUSE but-
ton. The PAUSE indicator will turn off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
PLAY
DISPLAY
DISPLAY
PHONES
PHONES LEVEL
,
,
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
DX-7222
7
1 – 9, 0, +10
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A－B
SHUFFLE
DISPLAY
/
,
/
NTROLLER
RC-402C
Listening with the headphones
• Plug the headphones with a standard binaural (stereo) plug into
the PHONES jack, and then adjust the sound level using the
PHONES LEVEL knob.
• Turn the knob clockwise to increase the sound level; turn it
DX-7222
counterclockwise to decrease the sound level.
DISPLAY button
Press the DISPLAY button during play to switch the time display
among the following three modes:
DX-7222
a
TOTAL REMAIN: Shows how much playing time is left for
the entire disc.
TOTAL REMAIN
SINGLE ELAPSED
SINGLE REMAIN
b
c
SINGLE ELAPSED: Shows how long the current track has
been playing.
SINGLE REMAIN: Shows how much time is left for the
track currently playing.
Remote controller
DISPLAY
Remote controller
Search play
Hold down the
/
or
/
button during play.
Release your finger when the music you would like to listen to is
reached. The music will start playing from that point.
Remote controller
Remote controller
Skip play
1. Each time the
controller) is pressed, the pickup will advance one track; and
each time the button (or the button on the
/
button (or the
button on the remote
/
remote controller) is pressed, the pickup will go back one track.
Press these buttons until the desired track number is selected.
2. Press the
When the
button to begin play.
button (or the
/
button on the remote
controller) is pressed once while playing, the pickup will return
to the beginning of the current track and play it.
1
4
2
3
6
9
Starting play from a given track
(Remote controller only)
5
8
0
Remote controller
1. Select the track number you wish to play, using the number
buttons and the +10 button.
7
2. The CD player starts playing automatically.
+10
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
DISPLAY
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
REPEAT
7
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A－B
SHUFFLE
SHUFFLE
A-B
ONTROLLER
RC-402C
Repeating play (Remote controller only)
Remote controller
Press the REPEAT button to enter the repeat play mode.
Repeat play can be used in conjunction with normal, memory, and
shuffle play modes.
REPEAT
REPEAT
Full repeat (Repeating all tracks on a disc)
Press the REPEAT button once.
During normal play
When the last track on the CD finishes, the CD player starts play-
ing from the first track on the CD.
During memory play
Remote controller
When the last track in memory finishes, the CD player starts play-
ing from the first track in memory.
During shuffle play
REPEAT
REPEAT
1
REPEAT
When the last track in shuffle play finishes, the CD player starts
playing the CD again, in a different order.
• Press the REPEAT button to cancel repeat play. The REPEAT
indicator will turn off.
Single repeat
Press the REPEAT button twice.
Before starting play
The CD player will play the first track repeatedly.
During play
The CD player will play the current track repeatedly.
• Press the REPEAT button to cancel repeat play. The REPEAT
indicator will turn off.
1
2
Remote controller
A－B
Flashes
A
A
B
B
Block repeat (Repeating a block of music)
You can repeatedly play a part between the start and end points
specified with the A-B button.
Remote controller
A－B
Lights
Follow the procedure below while a CD is playing.
1. Press the A-B button at the beginning of the block repeat.
(Point A)
2. Press the A-B button at the end of the block repeat. (Point B)
The section between A and B will be played repeatedly.
A－B
A－B
1
2
Note:
You can specify A and B points beyond a track.
This function is not available during memory play, repeat play (full
repeat and single repeat), shuffle play, and time edit play.
• Press the A-B button once again to cancel block repeat play.
Point A
Point B
Shuffle play
Press the SHUFFLE button.
In shuffle play mode, the CD player will play the tracks in random order.
• The auto space function will insert 3 seconds of blank time
between tracks during shuffle play. Play automatically begins.
• This function can be used in memory mode. In this case, the
programmed tracks are played at random.
Remote controller
SHUFFLE
SHUFFLE
Press the SHUFFLE button to cancel shuffle play. The SHUFFLE
indicator will turn off.
Note:
In shuffle play repeat mode, when all of the tracks have been played
once, play will be repeated with a different track progression.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the memory function
• Up to 36 tracks can be stored in memory.
STOP
PLAY
DISPLAY
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
DX-7222
MEMORY
CLEAR
7
NEXT
SELECTION
+10
TIME EDIT
/
,
/
PEAK SEARCH A－B
SHUFFLE
1 – 9, 0, +10
CLEAR
MEMORY
ECONTROLLER
RC-402C
Storing a program into memory and playing it
Remote controller
1
2
MEMORY
1. Press the MEMORY button.
MEMORY
2. Select the desired track number, using the
tons and press the MEMORY button.
and
but-
To enter further track numbers into memory, repeat this proce-
dure. You can store maximum of 36 tracks in memory.
* If you use the remote controller, press the number buttons to
select the desired track.
DX-7222
Remote controller
1
2
5
8
0
3
6
9
3. When you press the
PLAY button, the CD player will
4
play the tracks in the order you selected.
7
Note:
• If more than 36 tracks are selected, “FL” will flash in the mem-
ory channel display area to indicate that the memory is full.
• If the MEMORY button is pressed during play, the current track
being played is stored in memory.
+10
Contents of the display
TRACK
1
6
2
7
3
8
4
5
Example: After storing tracks 2, 3, 5, 6, 9 and 12 in memory.
MEMORY
DISC
9
10
• Before starting play
12
11
TOTAL REMAIN
a
b
c
The selected track numbers
Memory channel
The total playing time of selected tracks
MEMO CH
• During play
d
Track number 2 is currently being played (the first track in
memory).
3
e
Next track number in memory
Remote controller
f Time elapsed in track currently playing
g
The remaining track numbers in memory
TRACK
2
3
5
MEMORY
DISC
6
9
12
NEXT
SINGLE ELAPSED
Stopping a memory play
Remote controller
Press the
STOP button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the memory function
Memory reverse function
Remote controller
MEMORY
When track numbers 2, 4, 6, 8 and 10 have been stored in memory,
Press the MEMORY button.
All tracks which have not been stored in memory will be stored in
memory, replacing the previous contents. When you press the
PLAY button, the CD player will start playing.
TRACK
1
2
7
3
4
9
5
MEMORY
DISC
6
8
10
TOTAL REMAIN
MEMO CH
TRACK
1
6
2
7
3
8
4
9
5
MEMORY
DISC
10
TOTAL REMAIN
MEMO CH
Clearing the last track stored
Remote controller
Press the CLEAR button.
CLEAR
The last track programmed in memory is cleared.
Canceling the memory play
Remote controller
Press the
STOP button while the CD player is in stop mode.
The contents of the memory are completely cleared.
SPACE indicator
A 3-second silence will be automatically added between tracks
during memory play (the SPACE indicator will flash). However,
during normal sequential play this space will not be inserted.
SPACE
Checking what is stored in memory
1
2
TRACK
1
6
2
7
3
8
4
9
5
1. When the CD player stops during memory play, the last pro-
gram number stored in memory will be shown in the dis-
play.
MEMORY
DISC
10
12
11
MEMO CH
SINGLE REMAIN
2. When you press the
button, the display will show each
track number stored in memory, in turn.
The selected track numbers
a
Remote controller
b
c
Memory channel and stored track number in memory channel
The playing time of track
TRACK
1
2
3
4
5
MEMORY
DISC
6
7
8
9
10
12
11
MEMO CH
SINGLE REMAIN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Functions
DISPLAY
,
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
1 – 9, 0, +10
TIME EDIT
7
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A－B
SHUFFLE
NEXT SELECTION
RNTROLLER
RC-402C
Remote controller
Selecting the next track for play
1
NEXT
SELECTION
NEXT
1. During playback, press the NEXT SELECTION button.
2. While the “– –” is flashing, select the next desired track
using the number buttons and the +10 button.
After playing the current track, the selected track will be
played.
Remote controller
2
1
2
5
8
0
3
6
9
Note:
4
The Memory Play or the Shuffle Play mode, if appropriate, will be
canceled before the playing of the specified track begins.
7
+10
Time edit function
Remote controller
1
TIME EDIT
This function can be used when recording from a CD to a cassette
tape.
Make sure that you cancel the memory mode before using this
function.
1. Press the TIME EDIT button.
1
6
2
7
3
8
4
5
• Pressing this button will change the Track Number display from
46 → 50 → 54 → 60 → 70 → 80 → 90 → 46 → .....
These numbers indicate the length of the tape.
DISC
TIME EDIT
TOTAL REMAIN
a
Tape length.
b
The track numbers to be recorded onto side A will be displayed
in a box.
c
This is the total time for the tracks on side A. This changes to
the display for side B ( ) after 2 or 3 seconds. Pressing the
DISPLAY button will show the display for the A side again.
Remote controller
1
2
5
8
0
3
6
9
Remote controller
4
• Each time the skip buttons are pressed, the tape length will
or
change by 1 minute.
7
• Use number buttons and + 10 button to directly enter the length
of the tape.
+10
The maximum setting is 99 minutes.
2. Press the
PLAY button.
The CD player starts playing from the first track on the disc to
be recorded onto side A.
When the last track on side A is completed, the pause mode is
automatically set.
2
3
Remote controller
3. Press the
PLAY button again.
PAUSE
The pause mode is canceled and the CD player starts playing
the remaining tracks for recording onto side B.
Note:
• The time edit mode does not function for discs with more than
20 tracks, or when the first track is longer than half the indicated
length of the tape.
Remote controller
• During time edit play, buttons other than STOP, OPEN/CLOSE,
and DISPLAY cannot be used for input.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Functions
DISPLAY
,
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
7
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A－B
SHUFFLE
A–B
PEAK SEARCH
NTROLLER
RC-402C
Peak search
1
Remote controller
PEAK SEARCH
This function searches for the peak sound level on the disc.
When using the memory mode, press the MEMORY button to
return to normal mode.
1. Press the PEAK SEARCH button.
• The CD player checks the disc for the highest sound level. The
PEAK SEARCH indicator will flash during this operation.
When the search is complete, the indicator will light.
Flashes
Lights
PEAK SEARCH
PEAK SEARCH
2. Press the A-B button.
“P” appears in the memory channel display area and flashes.
3. Press the
PLAY button.
• The section of the disc with the highest sound level will be
played repeatedly for 6 seconds. Refer to this level when
recording the disc onto a cassette tape.
2
3
4
Remote controller
4. Press the
STOP button.
A－B
The CD player stops.
• This level is stored until the
OPEN/CLOSE button is pressed or the power is turned off.
To repeat the 6-seconds playback of the peak level, follow steps
2, 3, and 4 when the CD player is stopped.
• Pressing the PEAK SEARCH button will turn off the PEAK
SEARCH indicator and the level will be cleared from the
memory.
Remote controller
• Pressing the A-B button after pressing the
PLAY button will
start the block repeat operation.
Note:
Depending on the disc playing, memorizing of a level which is not
the maximum audible level could occur. This is due to the CD
player’s microprocessor memorizing inaccurate information
because of flaws in the disc itself, or recording conditions. Under
such circumstances, the recording level for the cassette tape may
be very low, or else distortion or similar symptoms could arise on
account of excessively high signal levels. To avoid this, be sure to
reset the recording level of the cassette deck if such symptoms
occur.
Remote controller
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Control positions and names
Note:
If there is a protective film on the surface of the display, making it difficult to read the display, remove it.
For more information about the function of a particular button, please turn to the page listed in the brackets ([ ]) following each name.
Front panel
1
2
3
4
5
6
7
DX-7222
14
13 12 11
10
9
8
a
b
c
d
e f
g
Display
PEAK SEARCH SHUFFLE
TRACK
1
6
2
7
4
9
5
3
1
REPEAT
PAUSE
A
B
SPACE MEMORY
DISC
8
10
15
20
TIME EDIT OVER
12
17
13
18
14
19
11
16
TOTAL REMAIN
SINGLE ELAPSED
SINGLE REMAIN
NEXT
MEMO CH
m
l
k
j
i
h
Front panel
Display
1. POWER button [7]
2. Disc tray [7]
3. Remote control sensor [5]
a. Track number display
b. REPEAT indicator
c. Block repeat indicator
4. Display (Refer to the “Display” illustration.)
5. PAUSE button [7]
6. STOP button [7, 11]
7. PLAY button [7, 10]
8. PHONES LEVEL knob [8]
9. PHONES jack [8]
d. PEAK SEARCH indicator
e. SPACE indicator
f. Shuffle play indicator
g. MEMORY indicator
h. Music calendar display
i. OVER indicator [7]
j. Time display
10. Skip/Search buttons [8, 10]
11. CLEAR button [11]
k. TIME EDIT indicator
l. PAUSE indicator
12. MEMORY button [10, 11]
13. DISPLAY button [8]
14. OPEN/CLOSE button [7]
m. Next track number/memory channel display
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Control positions and names
Remote controller
1. Open/Close button [7]
2. CD operation buttons
: Pause button [7]
DISPLAY
: Stop button [7, 11, 13]
1
6
7
: Play button [7, 10, 13, 21]
: Fast reverse button [8]
: Fast forward button [8, 11]
: Down button [8, 12]
2
: Up button [8, 12]
3. Number buttons and +10 button [8, 10, 12]
4. PEAK SEARCH button [13]
5. A-B button [9, 13]
6. DISPLAY button [8]
7. REPEAT button [9]
8. MEMORY button [10, 11]
9. CLEAR button [11]
10. TIME EDIT button [12]
11. NEXT SELECTION button [12]
12. SHUFFLE button [9]
1
4
2
5
8
0
3
6
REPEAT
MEMORY
CLEAR
8
9
3
7
9
NEXT
+10
SELECTION TIME EDIT
10
PEAK SEARCH A－B
SHUFFLE
11
12
4
5
REMOTE CONTROLLER
RC-402C
Precautions for handling the Compact Disc (CD)
Important note on handling CDs
Playable discs
1. Carefully lift the disc from the disc case, making sure to hold
the disc by its edges or the hole in the middle.
This unit can play back the following discs.
Disc mark Contents Disc size Maximum playback time
12 cm
74 minutes
20 minutes
Audio
CDs
Audio
8 cm
(CD single)
You cannot play back discs other than those listed above.
Do not use discs that are not audio discs (e.g. CD-ROMs for use
with personal computers), as these could damage the speakers and
amplifier.
2. A dry, soft cloth may be used to wipe dust and fingerprints
off the surface of CDs.
Do not use volatile agents on discs, such as thinner or ben-
zine. Also, do not use conventional record cleaner or anti-
static agents.
Avoid using heart-shaped or octagonal discs. playing irregularly
shaped discs may damage the internal mechanism of the unit.
Do not use discs on which adhesive from adhesive tape or a disc
label (if it is a rental disc) remains.
Otherwise, you may not be able to eject the discs or the unit may
become inoperative.
• Do not place a CD in direct sunlight or locations subject to high
humidity or low temperature.
• Do not store a CD in this unit tray for a long period of time.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Specifications
• No power.
Signal readout system:
Reading rotation:
(constant linear velocity)
Linear velocity:
Error correction system:
D/A converter:
Sampling frequency:
Number of channels:
Frequency response:
Total harmonic distortion:
Dynamic range:
Signal to noise ratio:
Channel separation:
Wow and Flutter:
Optical non-contact
About 500 - 200 r.p.m.
Cause: Power cable is not properly plugged into the AC outlet.
Remedy: Insert the power plug firmly.
1.2 - 1.4 m/s
• A disc is loaded in the disc tray, but playback will not start.
Cause: A disc in the disc tray may be upside down.
Remedy: Load the disc with the label facing upward.
Cause: The disc is dirty.
Cross Interleave Reed-Solomon code
1 bit PWM/ACCUPULSE
352.8 kHz (8 times oversampling)
2 (stereo)
5 Hz - 20 kHz
0.005% (at 1 kHz)
96 dB
90 dB
85 dB (at 1 kHz)
Below threshold of measurability
2 volts r.m.s.
9 watts
120 V, 60 Hz
230V, 50 Hz
220-230V/120V switchable, 50/60 Hz
435 × 91 × 308 mm
(17-1/8" × 3-9/16" × 12-1/8")
3.7 kg (8.2 lbs.)
Remedy: Clean the disc.
Cause: Moisture has accumulated inside the CD changer.
Remedy: Remove the disc from the disc tray, place the CD
changer in a warm place, and leave the power on for
about one hour.
• No sound is heard.
Cause: Connections may be incomplete or incorrect.
Remedy: Check all cable connections. Insert all the plugs
firmly into the jacks.
Output level:
Power consumption:
Power supply:
Cause: The input selector switch on the amplifier may be set
incorrectly.
Remedy: Set the switch to the proper position. See your
amplifier’s operating instructions for more informa-
tion.
Dimensions (W × H × D):
• Disc playback skips.
Weight:
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: A disc is scratched.
Remedy: Replace the disc.
Specifications and features are subject to change without notice.
Cause: The CD changer is subject to being accidentally
bumped.
Remedy: Place the CD changer in a more stable location.
• Search time (when locating a specific track) is extremely long.
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: The disc is scratched.
Remedy: Replace the disc.
• Track numbers cannot be stored in memory.
Cause: No disc in the tray.
Remedy: Load a disc in the tray.
Cause: You have entered a track number that does not exist on
the disc.
Remedy: Use only the track numbers that exist on the disc.
• Front panel controls function correctly, but remote control-
ler does not.
Cause: No batteries in remote controller.
Remedy: Insert batteries.
Cause: Batteries have worn out.
Remedy: Replace batteries.
This unit contains a sensitive microcomputer, which under certain
circumstances might fail to operate due to excessive noise interfer-
ence. In such case, switch off the main power by pressing the
POWER switch, wait five seconds, then switch it on again.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO CHINA LIMITED
Units 2102-7, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
HOMEPAGE
E
SN 29342748
I9907-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|