INSTRUCTION MANUAL
BODY FAT
ANALYZER
Model
HBF-306
Table of Contents
Notes on Safety . . . . . . . . . . . . . 2
Features of the Product . . . . . . . 4
Names and Functions
of the Parts . . . . . . . . . . . . . . . . . 5
How to Insert and Replace
the Batteries . . . . . . . . . . . . . . . . 7
How to Measure . . . . . . . . . . . . . 8
Set the Personal Data. . . . . . . . . . . . . . 8
Start the Measurement . . . . . . . . . . . . 12
How to Interpret the
Measured Results . . . . . . . . . . . . . . . . 14
How to Care for and
Store the Unit . . . . . . . . . . . . . . 15
Thank you for purchasing
the OMRON Body Fat Analyzer.
Troubleshooting . . . . . . . . . . . . 16
What You Should Know When
Using this Unit . . . . . . . . . . . . . 17
Before using this unit for the first
time, please be sure to read this
instruction manual carefully and
use the unit properly.
For a Correct Measurement . . . 20
Specifications . . . . . . . . . . . . . . 23
Caution . . . . . . . . . . . . . . . . . . . 24
Limited One Year Warranty . . . 25
Please keep this instruction manual
on hand for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Safety
Never start weight reduction or exercise therapy without
the instructions of a physician or a specialist.
• Self-diagnosis may damage your health condition.
• Consult with your physcian before using when pregnant.
Do not disassemble this unit. You may be injured or damage the unit.
General Advice
Do not use this unit when your body and/or fingers are wet,
such as after taking a bath.
Do not place this unit in a highly humid environment, where water
may splash, in direct sunshine, in a place where the air from
air conditioning hits directly, or near fire.
Do not wash this unit with water.
As this unit is a precision instrument, do not drop, vibrate,
or apply strong shock.
Do not use batteries not specified for this unit. Do not insert the batteries
with the polarities in the wrong direction.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features of the Product
Easy-to-Understand Display
The unit displays the measured value of body fat percentage by the BI
method and indicates the body mass in four ranges of LOW, NORMAL,
HIGH, and VERY HIGH according to the BMI value.
BI method: Bioelectrical Impedance method (see page 5)
BMI: Body Mass Index = (weight (lbs) x703) / height (in) / height (in)
BMI: Body Mass Index in metric = weight (kg) / height (m) / height (m)
NORMAL or ATHLETE mode can be selected
for a more accurate measurement.
Measurement is fast and simple.
After inputting the data, a measurement can be started by simply holding
the grip electrodes and pressing the Start button. The measured results are
displayed approximately 7 seconds after the START symbol is displayed.
The measured results are shown in an easy-to-see display.
Body fat percentage and body mass index are shown simultaneously
in an easy-to-see large digital display and a bar display that
can be read at a glance.
The memory function stores up to 9 personal profiles
The memory function can store up to 9 people's information
(height, weight, age, and gender).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of the Parts
Main unit
Grip electrodes
Display
Displays the set values
and the measured results.
Extremely weak electrical
current is sent from here
during the measurement.
Grip electrodes
On/Off button
Turns the power
on and off.
Battery cover
Start button
Press the button and
the measurement starts.
Set button
Sets the personal
number and the
personal data.
Up / Down button
Sets the numerical values for personal information
including height, weight, age and gender. This button
is also used to set the personal numbers from 1 to 9.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of the Parts
Display
Height / weight / age mode
Body fat percentage /
height / weight / age
Athletic level
Ready to measure
Starting to measure
Gender
Low battery
indicator
(When this symbol
flashes, replace
the batteries.)
Measurement
progress / BMI
classification bar
Personal No.
GUEST
How to change the unit to metric mode:
1. Simultaneously push the On/Off, the Start, and the Up buttons.
The power turns on and the bottom LCD should read USA.
(If the LCD says “guest”, turn the unit off and try again.)
2. Push the Set button and the LCD changes.
3. Push and hold the Set button again for 3-4 seconds
until the upper LCD changes to “CAl”. At this time,
all personal data are deleted.
BMI
4. Push the On/Off button to turn off the power.
• In this mode, the power does not turn off
automatically. Be sure to turn off the power.
5. Push the On/Off button to turn on the power.
The display unit changes to the metric system.
• To return to US display, repeat the same procedure.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Insert and Replace the Batteries
How to Insert the Batteries
1. While pressing the
mark on the battery
cover on the back of the unit with your finger,
slide off the cover in the direction of the arrow.
2. Insert two AAA batteries with the polarities
in correct alignment.
3. Slide and securely close the battery cover.
Battery life and replacement
When the battery replacement symbol flashes,
replace both batteries with new ones.
• Replace the batteries after turning off the power.
• Dispose of the used batteries according to the
disposal method in the municipality where you live.
Battery life
• Two AAA batteries will last approximately 1 year
(when measurements are made twice a day).
• Because the supplied batteries are for monitor
use only, they may have a shorter life.
As the batteries may leak and damage the main unit, please note the following points:
• Remove the batteries from this unit when you are not going to use it for a long period
of time (approximately three months or more).
• Replace the worn batteries with new ones immediately.
• Do not use manganese and alkaline batteries together.
• Do not use new and worn batteries together.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Measure: Set the Personal Data
1.Turn on the power.
Push the On/Off button.
All displays turn on.
2. Set the personal data.
If you don’t want to set personal
data for each measurement:
Select the guest.
1) The display GUEST flashes.
Push the Set button.
The display GUEST changes
to NORMAL / ATHLETE selection mode.
2) Set the personal data (Refer to "Setting
of personal data").
When you want to set the personal number and
store the personal data:
Select the personal number.
1) When Guest is flasing, push the Up / Down
button and select a personal number from 1 to 9.
2) Push the Set button.
The personal No. turns on and changes
to NORMAL / ATHLETE selection mode.
3) Set the personal data (Refer to "Setting
of personal data").
When you have already set your personal
No. and stored your personal data:
Select your personal number
1) Push the Up / Down button to select your
personal number
2) Push the Set button.
The personal No. turns on and the personal
data is displayed.
3) Start the measurement (Refer to "Start
the measurement").
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Measure
Setting of personal data
How to select NORMAL / ATHLETE mode
1) Each time you push the
Up / Down button, the display
of NORMAL / ATHLETE flashes.
2) Push the Set button to select
NORMAL or ATHLETE.
Should I use Normal or Athlete mode?
NORMAL / ATHLETE selection
Calculate your FIT index by using the formula below.
Use Athletic mode if your FIT index is over 60 or more
otherwise select Normal mode.
FIT Index = Frequency × Intensity × Time
FIT Index ≥ 60 ——— Athlete
FIT Index < 60 ——— Normal
Number
Frequency of Exercise
5
4
3
2
1
Daily or almost daily
3 to 4 times per week
1 to 2 times per week
A few times per month
Less than once per month
Intensity
Conditioning Exercise
Cycling - > 12 mph pace
Sports
Basketball - competitive
Weightlifting - vigorous,
powerlifting or bodybuilding
Boxing
Football - competitive
Handball, racquetball, or squash
Ice hockey
Rowing - moderate to vigorous
Stationary cycling - moderate to
vigorous effort
Karate or kickboxing
Rockclimbing
Rowing machines - moderate to
vigorous effort
5
Rugby
Aerobic dancing - high impact
Step aerobics
Soccer - competitive
Tennis
Running -> 5.0 mph
Rope jumping
Swimming - competitive or lap
Speed skating - competitive
Skiing - cross-country
Skiing - downhill racing
Rollerblading (roller skating)
Ski machine
Stairstepping
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search And Download.
9
How to Measure
Intensity
Conditioning Exercise
Cycling - < 12 mph pace
Weightlifting - moderate effort
Stationary cycling - light effort
Rowing - light effort
Sports & Recreational Activities
Archery
Basketball - shooting baskets
Bowling
Fencing
Calisthenics
Golf
Stretching / Yoga
Gymnastics
Horseback riding
4
Rowing machines - light effort
Water aerobics or water exercise Baseball
Aerobic dancing - low impact
Jogging - < 5.0 mph
Softball
Tai Chi
Walking - > 2.5 mph
Volleyball - competitive
Wrestling - competitive
Ice Skating - < 9 mph
Swimming - leisurely
Rollerblading - leisurely
Time
Duration
4
3
2
1
45 minutes or more
30 to 44 minutes
15 - 29 minutes
less than 15 minutes
Example: You run 5 times a week for 30 minutes
FIT Index = Frequency X Intensity x Time
75 = 5 x 5 x 3
FIT Index ≥ 60, Athlete mode
Setting of height (Setting range: 3' 4" to 6' 6")
1) Confirm the height setting screen. The height
value 5' 7" flashes. The height
is indicated.
2) Push the Up / Down button to set the height
value. The height value increases increments
by 1/4". By pushing the button for more than
1 second, the height values change at high speed.
3) Push the Set button to set the height value.
The display changes to the weight setting screen.
Setting of weight (Setting range: 23 lb. to 440 1/2 lb.)
1) Confirm the weight setting screen. The weight value
135 lb. flashes and the weight is indicated.
2) Push the Up / Down button to change the
weight value. The weight value increments
change by 1/2 lb. By holding the button for
more than 1 second, the weight values change at high speed.
3) Push the Set button to set the weight value. The display
changes to the age setting screen.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Measure
Setting of age (Setting range: NORMAL, 10 to 80 / ATHLETE, 18 to 60 years old)
1) Confirm the age setting screen.The age
value 40 flashes and the age is indicated.
2) Push the Up / Down button to change the
age. The age values change by 1 year. By
holding the button for more than 1 second,
the age values change at high speed.
3) Push the Set button to set the age value.
The display changes to the gender setting screen.
Setting of gender (Setting: male / female)
1) Confirm the gender setting screen.
The gender “male” flashes.
2) Push the Up / Down button to change
the gender. The display of male
or female flashes alternately.
3) Push the Set button.
All the set items are fixed and stored. “Ready” is displayed.
To change any values:
1) Push the Set button to flash the personal data you want to change.
2) Push the Up / Down button to change the setting.
By pushing both the Up and Down buttons at the same time,
the current blinking display will reset to the initial value.
How to delete all 9 personal data values from the memory
1) Push the Up button and select the personal No. 1.
2) Push the Set button for 2 seconds.
3) All personal data are deleted and all displays turn on.
(Same state in which the On/Off button is pushed.)
If you leave the set items in the setting screen without
confirmation, the display will change to the initial values
or the values before setting in approximately 1 minute.
After 1 minute, the unit will automatically turn off.
When your age, weight, or height has changed, reset
the value accordingly.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Measure: Start the Measurement
3. Start the measurement.
When the values are set to height of 6' 3 1/4, weight of 149 lbs.,
age 37 years old, and gender male:
1) Stand with both feet slightly apart.
2) Hold the grip electrodes.
Wrap your middle finger around
the groove of the handle. Place
the palm of your hand on the top
and the bottom electrodes. Put your
thumbs up, resting on top of the unit.
3) Hold your arms straight out, at a 90
degree angle to your body. Do not
move during the measurement.
4) Confirm the ready to measure display.
The
indicator turns on.
5) Push the Start button.
The display
turns on.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Measure
6) Hold the electrodes with both hands.
The unit automatically detects that
it is held and starts measurement.
The display flashes one by one
and moves to the right end.
The BMI judgment bar turns on immediately
after the body fat percentage and the
BMI are displayed. (The bar at the
right end flashes). You can start another
measurement when the
indicator turns on.
For how to interpret the measurement results
in detail, please refer to the following page.
7) Push the On/Off button
to turn the power off.
If you do not push the On/Off button, the unit will turn
off automatically in approximately three minutes after
displaying the measurement results.
Measuring postures that should be
avoided
Measurement in the following positions may
not provide accurate measurement.
How to hold the grips.
In the following cases, the electric resistance
may not be measured correctly.
Elbows are bent.
Moving your body
or arms during
measurement
Your fingers are apart from the grips.
Arms are positioned
too upward or
downward of the
desirable angle
to the body.
Measuring while
lying down or sitting
When holding the grips,
the hands are positioned
unevenly towards the
top or the bottom
of the electrodes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Measure: How to Interpret the Measured Results
How to Interpret the Measured Results
Body fat percentage
Displays the body fat mass
as the percentage of body weight.
BMI classification
Displays LOW, NORMAL,
HIGH, or VERY HIGH.
BMI
BMI is an internationally used index to show the body condition
by checking the balance between the height and the weight.
It is calculated by the following formula:
BMI: Body Mass Index = (weight (lbs) x703) / height (in) / height (in)
BMI in metric = weight (kg) / height (m) / height (m)
Recommended Body Fat Ranges and BMI
Age
Low
Recommended High
Very High
(BMI < 18.5) (BMI 18.5-24.9) (BMI 25-29.9) (BMI > 30)
Female 20-39
40-59
5-20
5-22
5-23
5-7
5-10
5-12
21-33
23-34
24-36
8-20
11-21
13-25
34-38
35-40
37-41
21-25
22-27
26-30
>38
>40
>41
>24
>27
>30
60-79
Male
20-39
40-59
60-79
Based on NIH/WHO guidlines for BMI
Based on Gallagher et al., American Journal of Clinical Nutrition, Vol.72, Sept. 2000
BMI
BMI (Designation by the WHO)
Less than 18.5
LOW (Low)
18.5 or more and less than 25 NORMAL (Normal)
25 or more and less than 30
30 or more
HIGH (Pre-obese)
VERY HIGH (Obesity)
The above-mentioned indices refer to the values for obesity judgment proposed by the
WHO, the World Health Organization.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Care for and Store the Unit
Clean the main unit with a soft dry cloth. If the main unit
is heavily stained, wipe it with a cloth lightly dampened
with water or detergent, then wipe it dry with a dry cloth.
Be careful so that no water gets inside the main unit.
Do not wipe the unit with benzene, gasoline, paint
thinner, alcohol, or other volatile detergrents.
Error Displays
Error display
Cause
What to do (the next button to push)
Electrodes were not
firmly grasped.
Grasp the grips correctly and measure.
(Refer to Pages 12 and 13.) (Start button)
Measurement posture
or grip was not stable.
Measure without moving your arms.
(Refer to Pages 12 and 13.) (Start button)
Slightly moisten hands with a wet
Hands are dry.
towel, then measure.
(Refer to Page 21.) (Start button)
Check the set height, weight, age,
The values of body fat
percentage and BMI are
outside the measurable range.
and gender again.
(Refer to Pages 10 and 11.) (Set button)
Turn on the On/Off button again and
start measurement. If this error still
occurs again, consult OMRON
Abnormal operation
customer service, ( 1-800-634-4350).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Trouble
What to inspect
How to repair
Replace both batteries
with new ones.
(Refer to Page 7.)
Are the batteries
worn out?
When the On/Off
button is pushed,
nothing is displayed.
Is the direction
of battery
Insert the batteries
correctly.
polarities correct?
(Refer to Page 7.)
The value of body fat
percentage is displayed
abnormally high (or low).
Measure again in
correct posture.
(Refer to Pages 12 to 13.)
Is the measurement
posture correct?
An error (E1 to E6)
is displayed and
the measurement
is impossible.
Please refer to "Explanation of Error Displays".
(Refer to Page 15.)
The measured values
differ extremely for
each measurement.
Please refer to "For a Correct Measurement"
(Refer to Pages 21 to 22.)
Push the On/Off button again and restart from the
beginning again.
Other conditions.
(Refer to Pages 8 to 13.)
If you cannot get a correct measurement after taking the above
mentioned measures, please contact the nearest OMRON dealer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WhatYou Should Know When UsingThis Unit
What is body fat percentage?
Body fat percentage refers to the amount
of body fat mass in regards to the total
body weight described in a percentage.
Fat mass
This Omron Body Fat Analyzer will provide
your specific body fat percentage and body mass.
It is also an excellent tool to measure your body fat
percentage and body mass on a continuous schedule.
Fat-free mass
• Bones
Body
Weight
• Blood
• Muscles
• Water
Body fat percentage (%) =
{Body fat mass (lbs.) / Body weight (lbs.)} x 100
Ratio of the body constituents
Normal
Obese
Water: 50 - 60%
Fat
(Male: 10 - 20%)
(Female: 20 - 30%)
Proteins
Minerals
Carbohydrates
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WhatYou Should Know When Using This Unit
Principles of body fat percentage measurement
The OMRON Body Fat Analyzer estimates the body fat percentage
by the Bioelectrical Impedance (BI) method.
What is the Bioelectrical Impedance Method?
Muscles, blood vessels and bones are body tissues having a high water
content that conduct electricity easily. Body fat is tissue that has little electric
conductivity. The Body Fat Analyzer sends an extremely weak electrical current
of 50 kHz and 500 µA through your body to determine the amount of fat tissue.
This weak electrical current is not felt while operating the Body Fat Analyzer.
The Bioelectrical Impedance Method safely combines the electric resistance
with the distance of the electricity conducted. Correct posture and consistent
measuring conditions need to be maintained for the best results.
How to estimate the body fat percentage.
Hydrodensitometry, or underwater weighing, has been the established
method for accurate evaluation of body composition. Omron has used
research information from several hundred people using the underwater
weighing method to develop the formula by which the Body Fat Analyzer
works. The body fat mass and body fat percentage is calculated
by a formula that includes five factors: electric resistance, height,
weight, age and gender.
What is the submerged body weight weighing method?
The underwater weighing method submerges a person in a pool from head
to toe to be weighed. Omron has collected information on people from
10 to 80 years of age using this method.
(There are certain conditions, such as with dialysis patients, when significant
differences may occur between the estimated and actual body fat values.
These differences may be related to consistently changing ratios of body
fluid and/or bone density.)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WhatYou Should Know When Using This Unit
For the following cases, the body fat percentage
measured by this unit may significantly differ
from the actual body fat percentage.
Measurements in the following groups of people may vary due to consistently
changing amounts of water and tissue density within their bodies:
Children in a growth stage
Elderly people and
post-menopausal women
People with a fever
Patients with osteoporosis
People who have swelling
who have very
low bone density
Bodybuilders or professional atheltes
Patients undergoing dialysis
19
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Correct Measurement
Body fat is affected by the change of water
content in the body.
A person’s hydration level and blood circulation may have an effect
on their body fat reading. In the table below are some situations
which could affect the reading.
Cause of Fluctuations
Examples of Fluctuation Periods
1 to 2 hours after breakfast, lunch,
or dinner
Water and food intake
After taking a bath or shower,
immediately after exercising, in extreme
environments (warm or cold), during
illness or extreme fatigue
Changes in blood circulation
Change in posture (during
measurement)
Moving from an up-right standing
position to lying down or prone position
The diagram below shows an example of the changes in body fat throughout
the day caused by a change of water content in the body. The changing pattern
of body fat percentage varies for each person. In order to obtain highly reliable
readings, please note the following pages.
An example of the fluctuation of body fat percentage throughout the day
Body fat (%)
25.0
24.0
23.0
22.0
7:00
a.m.
9:00
a.m.
11:00
a.m.
1:00
p.m.
3:00
p.m.
5:00
p.m.
7:00
p.m.
9:00
p.m.
11:00
p.m.
Measurement time
Waking up
Breakfast
Lunch
Dinner
Taking a bath
Going to bed
Daily
activity
20
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Correct Measurement
Please avoid measurement under the following
conditions.
If a measurement is made under the following physical conditions,
the measured body fat percentage may differ significantly from
the actual one because the water content in the body is changing.
Immediately after
vigorous exercise
Immediately after
a bath or sauna
After drinking alcohol
After drinking a large amount
of water or after a meal
(1 to 2 hours)
Advice for measurement
If the palms of your hands are dry or the temperature of your palms or the
grip of the electrodes are extremely cool, stable measurement is impossible,
which may lead to display error indication or inaccurate results.
Please pay special attention in winter because the air is dry and/or the temperature is low.
Conditions
Actions
Slightly moisten hands with a wet
towel, then measure.
Hands are dry.
Warm the grip electrodes by leaving
the unit in a warm room for
approximately ten minutes.
When you hold the grip electrodes,
they feel cold.
Warm your hands by immersing in hot
water or staying in a warm room. Start
the measurement again.
Your body and hands are cold
due to the blood not circulating well.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Correct Measurement
Recommended times for measurement
Understanding the normal changes in your body fat percentage can help you
in preventing or reducing obesity. Being aware of the times when the body fat
percentages shift within your own daily schedule will assist you in obtaining an
accurate trending of your body fat. It is recommended to use this unit in the
same environment and daily circumstances. (See chart)
Recommended times for measurement
Daily activities
Waking up
Recommended time
After waking up
Breakfast
2 hours
Before lunch and about 2 hours or
more after breakfast
Recommended time
Lunch
2 hours
In the afternoon about 2 hours or
more after lunch and before taking
a bath or eating dinner
Recommended time
Taking a bath or
eating dinner
2 hours
Before going to bed and about 2
hours or more after dinner
Recommended time
(Avoid measurement
immediately after bathing.)
Going to bed
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
OMRON Body Fat Analyzer
HBF-306
Designation
Model
Display
Body fat percentage (4.0 to 50.0%)
BMI (7.0 to 90.0)
BMI classifacation (4 levels)
Set ranges
Height: 3' 4" to 6' 6" (101 cm. to 198 cm.)
Weight: 23 lbs. to 440 /2 lbs. (10 kg. to 220 kg.)
1
Age:
NORMAL; 10 to 80 years old
ATHLETE; 18 to 60 years old
Gender: Male / Female
Power supply
Battery life
2 AAA batteries (R03).
(You may use 2 AAA alkaline batteries (LR03).)
Approximately 1 year (when used twice a day)
Operating temperature
and humidity
50°F to 104°F (+10°C to +40°C), 30% to 85% RH
Storage temperature
and humidity
-4°F to 140°F (-20°C to +60°C), 10% to 95% RH
External dimensions
Approx. 8" (L) x 5" (H) x 2" (W)
(197 (L) x 128 (H) x 49 mm (W))
Weight
Approx. 8 oz. (230 g) (not including batteries)
Accessories
2 AAA batteries for monitor use
Instruction manual
Body Logic Fitness and Nutrition Guide
Specifications may be changed without prior notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
CAUTION:
Changes or modifications not expressly approved by Omron Healthcare, Inc.
will void the user’s warranty.
NOTE:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)
This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. The product generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If the product does cause harmful
interference to radio or television reception, which can be determined
by turning the product on and off, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled "Digital Apparatus", ICES-003
of the Canadian Department of Communications.
Cet appareil numérique respecte les limites de bruits radioeléctriques
applicables aux appareils numériques de Classe B prescrites dans
la norme sur le matériel brouilleur: "Appareils Numériques",
NMB-003 èdictée par le ministre des communications.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited OneYear Warranty
Your HBF-306 Body Fat Analyzer is warranted to be free from manufacturing
defects for a period of one year under normal use. This warranty extends
only to the original retail purchaser.
Should repair be needed within the warranty period, ship the unit prepaid
with the proof of purchase date and $5.00 for return shipping and insurance to:
Omron Healthcare, Inc.
Attn: Service Dept.
300 Lakeview Parkway
Vernon Hills, IL 60061
Be sure to include the model number and your phone number on any correspondence.
We will either repair or replace (at our option) free of charge any parts
necessary to correct defects in the materials or workmanship.
The above warranty is complete and exclusive. The warrantor expressly
disclaims liability for incidental, special, or consequential damages of any nature.
(Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above warranty may not apply to you.)
Any implied warranties arising by the operation of law shall be limited in duration
to the term of this warranty. (Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.)
This warranty gives you specific legal rights and you may have other
rights which vary from state to state.
FOR CUSTOMER SERVICE CALL TOLL FREE:
1-800-634-4350
25
Download from Www.Somanuals.com. All Manuals Search And Download.
For Customer Service
Call Toll Free
1-800-634-4350
Distributed by:
OMRON HEALTHCARE, INC.
300 Lakeview Parkway
Vernon Hills, Illinois 60061
Copyright © 2001 OMRON Healthcare, Inc.
HBF-306INST Rev
Download from Www.Somanuals.com. All Manuals Search And Download.
|