SYSTEM MICROSCOPE
CX41
CX2 SERIES
Optics and performance outstanding in its class
Download from Www.Somanuals.com. All Manuals Search And Download.
Outstanding flat images from PLCN objectives
The CX41 provides images of outstanding brightness and clarity in a variety of observation
modes. As well as Olympus' renowned UIS2 optics infinity system, it employs the PLCN
series of Plan Achromat objectives, which are made from carefully selected top quality glass
and manufactured with the most rigorous precision. The result is a major improvement in
image flatness, with the 10X and 40X objectives in particular providing images that are among
the very best in this class of microscope. Transmitted light illumination is from a 6V, 30W
high-intensity halogen light source.
Flatness area comparison
10X
40X
F.N. 20
F.N. 20
Conventional
objective
Conventional
objective
PLCN10X
PLCN40X
Download from Www.Somanuals.com. All Manuals Search And Download.
Excellent cost-performance in reflected light fluorescence
and other observation methods
Simple phase contrast attachment /
CX-PH1, 2, 3
For phase contrast observations at 10X,
40X and 100X.
Slide condenser / CX-SLC
Darkfield central stop / CH2-DS
Brightfield condenser / CH3-CD
For darkfield observations from 4X to 40X.
These Abbe type condensers allow
* Separate filter holder (CH2-FH) or attachment lens (CX-AL)
required.
brightfield observations from 4X to
100X. Accurate centering is provided by
the attachment lens (CX-AL) and the iris
diaphragm, to exclude unnecessary
light and obtain bright Koehler
illumination right across the
magnification range. These highly
economical condensers enable phase
contrast and darkfield observations by
simply adding basic accessories.
Low magnification adapter /CX-LA
Use of the 2X low magnification objective allows
macro observation.
Reflected light fluorescence
attachment / CX-RFA-2
Simple polarizing condenser /
CH3-CDP
Users can choose between blue or green
excitation and transmitted light
With the optional plate adapter U-TAD,
polarizing observations from 4X to 100X
using a tint plate can be performed.
A U-GAN analyzer is provided for gout
inspection. Polarizing objectives from
4X to 100X are
observations. UIS2 optics provide bright
fluorescence images, with no intermediate
magnifications when changing from
transmitted light to fluorescence
observation. Standard PLCN objectives can
be used without replacement.
available.
* Separate polarizer
U-POT and analyzer
U-ANT required.
Dry darkfield condenser / CX-DCD
This dry-type darkfield condenser gives a
superior darkfield effect without the need for
immersion in oil.
Suitable for use
at 10X and 40X
magnifications.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Dependable basic performance assures
outstanding operational convenience
Move the specimen with just one finger
Rubber grips are provided for the stage
handles, allowing the specimen to be moved
smoothly with just one finger. The slim body
and conveniently positioned controls ensure
that everything is within easy reach, so
operators can maintain a natural posture.
Tilting binocular tube
The tilting binocular tube lets each operator
select the most suitable and comfortable
eyepoint — a valuable contribution to
reducing fatigue in extended observation
sessions. High cost-efficiency type (U-CTBI)
is also available.
U-TBI-3
U-CTBI
Inward-facing quintuple revolving
nosepiece
Rackless stage with enhanced
operability
The quintuple revolving nosepiece enables a
wide range of magnification observations
and various combinations of objectives.
Unrestricted access to the space in front of
the objective allows specimens to be
exchanged quickly and easily.
To keep the work area clear, and to avoid
interference with observation operations,
the X-direction travel guide does not extend
out from the side of the stage. The main
and sub-scale displays are designed for
easy read-out.
Phase-contrast condenser / CX-PCD
The multi-purpose CX-PCD condenser
allows observation of brightfield, phase-
contrast and darkfield images without
exchanging condensers. Phase-contrast
observation from
Torque adjustable focusing knob
Easy transportation and installation
The CX41 is eminently portable, with
convenient handgrips at the front and back
of the frame and no inconvenient protrusion
of the stage guide.
10x to 100x and
The torque of the coarse focusing knob can
be adjusted, to suit different operators' needs
and to make focusing smooth and easy while
keeping the hands on the desk. A stage
upper limit stopper is also provided.
darkfield
observation from
10x to 40x is
allowed.
Anti-fungus treatment
The treatment applied to the
observation tubes, eyepieces and
objectives, protects quality of optical
parts even in high humidity regions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
More accessories, more observation versatility
Easy digital imaging
A simple eyepiece adapter enables an
Olympus digital camera to be attached to
binocular tube U-CBI30-2 — an easy,
practical and cost-efficient means of
obtaining digital images.
Eyepoint adjuster / U-EPA2
Allows the eyepoint position to be raised by
30mm. Up to two eyepoint adjusters can be
attached between the frame arm and
observation tube.
Dual observation attachment / U-DO3
Enables dual, simultaneous observation of
a single specimen from the same direction
with equal magnification and brightness for
both operators. A pointer can be used to
indicate specific sections of the specimen to
simplify the training process and enhance
discussion.
Arrow pointer / U-APT
Enables insertion of an LED arrow for
display in a photomicrograph.
2x magnification changer / U-ECA
Magnification is doubled by engaging the
auxiliary 2X lens.
Trinocular tube / U-CTR30-2
Still digital (DP12) or video cameras can
be attached for on-site/remote illustration
of educational/discussion meetings.
Trinocular intermediate attachment /
U-TRU
A binocular tube on its own allows
photomicrography. Combination with
this intermediate attachment type
trinocular tube makes it possible to attach
photographic equipment and a video
camera at the same time.
Drawing attachment / U-DA
The drawing attachment projects an image
of the pencil and drawing surface into the
visual field.
U-DA
CX41+DP12
U-DAL10X
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Item
CX41
Optical system
Illumination
UIS2 (Universal Infinity-corrected) optical system
Built-in transmitted Koehler illuminator
6V30W halogen bulb
100-120V/220-240Vg 0.85/0.45A 50/60Hz
Focusing
•Stage height movement by roller guide (rack & pinion) •Stroke per rotation: 36.8mm
•Full stroke range: 25mm •Upper limit stopper •Tension adjustment on coarse focus adjustment knob
Revolving nosepiece
Observation tube
Fixed quintuple nosepiece with inward tilt
Type
U-CBI30-2, Binocular
U-CTR30-2, Trinocular
U-CTBI, Tilting binocular
Field number
Tube inclination
20
20
18
30º
30º
30º—60º
48—75mm
None
Interpupillary distance adjustment range 48—75mm
48—75mm
Light path selector
Size
None
None (Bi 50%, Video/Photo 50% fixed)
Stage
188(W)X134(D)mm
Movement range
Specimen holder
Rubber grip
Type
76mm X-direction X 50mm Y-direction
Double slide holder
Equipped as standard
Abbe condenser
Condenser
(CH3-CD)
N.A.
1.25 with oil immersion
Built-in
Aperture iris diaphragm
Dimensions & weight
233(W) X 432(H) X 367.5(D)mm, approximately 8.5kg (approximately 18.7 lb.)
Dimensions
(Unit: mm)
Objectives, Plan Achromat
PLCN
Numerical Aperture Working Distance
(N.A.)
(W.D.)
18.5mm
10.6mm
1.2mm
0.6mm
0.2mm
0.13mm
0.13mm
4X
0.10
10X
0.25
20X
0.4
40X
0.65
60X
0.8
100XO
100XOI
1.25
1.25-0.6
Eyepiece
Field Number (F.N.)
WHB10X
CWH10X (for U-TBI-3)
20
20
245
160
233
* The length marked with an asterisk (*) may vary accoding to interpupillary distance. Distance for figure shown is 62mm.
Environmentally-friendly product
All optical components in CX41 microscope
use lead-free eco-glass.
ISO9001
ISO14001
Design and production at the OLYMPUS
CORPORATION Ina Plant conforms with
ISO14001 specifications for
Certification
Certification
Design and production
adheres to ISO9001
internationalquality standard.
environmental management systems.
Specifications are subject to change without any obligation on the part of the manufacturer.
This catalog is printed by enviromentally-friendly
waterless printing system with soy ink.
Printed in Japan M183E-0105B
Download from Www.Somanuals.com. All Manuals Search And Download.
|